- Acc - mailweb.openeuler.org

[PATCH] drv/hpre: bugfix about sm2 async parsing error
by Zhiqi Song 21 Jun '22

21 Jun '22

After a series of modification, the 'hw_msg->low_tag' is used to represent the sequence of sync or async task element now. In async mode, the value of 'hw_msg->low_tag' comes from async task pool, refers to wd_get_msg_from_pool(). In sync mode, the value of 'hw_msg->low_tag' is a random number, refers to hisi_set_msg_id(). Therefore, whether 'hw_msg->low_tag' is zero cannot be used as the judgment condition for different modes, so 'hw_msg->low_tag' cannot be set to zero directly. This is the reason why the async task of sm2 failed. To fix this problem, we remove the operation of setting tag to zero, use 'qp_mode' to distinguish between sync and async modes. Signed-off-by: Zhiqi Song <songzhiqi1(a)huawei.com> --- drv/hisi_hpre.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drv/hisi_hpre.c b/drv/hisi_hpre.c index 5d6e537..116097d 100644 --- a/drv/hisi_hpre.c +++ b/drv/hisi_hpre.c @@ -827,7 +827,6 @@ static int ecc_prepare_alg(struct wd_ecc_msg *msg, return 0; } - static int trans_cv_param_to_hpre_bin(struct wd_dtb *p, struct wd_dtb *a, struct wd_dtb *b, struct wd_dtb *n, struct wd_ecc_point *g) @@ -1942,13 +1941,12 @@ static int sm2_enc_out_transfer(struct wd_ecc_msg *msg, } static int ecc_out_transfer(struct wd_ecc_msg *msg, - struct hisi_hpre_sqe *hw_msg) + struct hisi_hpre_sqe *hw_msg, __u8 qp_mode) { int ret = -WD_EINVAL; void *va; - /* async */ - if (LW_U16(hw_msg->low_tag)) { + if (qp_mode == CTX_MODE_ASYNC) { va = VA_ADDR(hw_msg->hi_out, hw_msg->low_out); msg->req.dst = container_of(va, struct wd_ecc_out, data); } @@ -2240,7 +2238,8 @@ static int sm2_convert_dec_out(struct wd_ecc_msg *src, return ret; } -static int ecc_sqe_parse(struct hisi_qp *qp, struct wd_ecc_msg *msg, struct hisi_hpre_sqe *hw_msg) +static int ecc_sqe_parse(struct hisi_qp *qp, struct wd_ecc_msg *msg, + struct hisi_hpre_sqe *hw_msg) { struct wd_ecc_msg *temp_msg; __u64 tag; @@ -2262,7 +2261,7 @@ static int ecc_sqe_parse(struct hisi_qp *qp, struct wd_ecc_msg *msg, struct hisi hpre_result_check(hw_msg, &msg->result); if (!msg->result) { - ret = ecc_out_transfer(msg, hw_msg); + ret = ecc_out_transfer(msg, hw_msg, qp->q_info.qp_mode); if (ret) { msg->result = WD_OUT_EPARA; WD_ERR("failed to transfer out ecc BD, ret = %d!\n", ret); @@ -2306,7 +2305,7 @@ static int parse_second_sqe(handle_t h_qp, hsz = (hw_msg.task_len1 + 1) * BYTE_BITS; dst = *(struct wd_ecc_msg **)((uintptr_t)data + hsz * ECDH_OUT_PARAM_NUM); - hw_msg.low_tag = 0; /* use sync mode */ + ret = ecc_sqe_parse((struct hisi_qp *)h_qp, dst, &hw_msg); msg->result = dst->result; *second = dst; @@ -2325,6 +2324,7 @@ static int sm2_enc_parse(handle_t h_qp, __u32 hsz; int ret; + msg->tag = tag; data = VA_ADDR(hw_msg->hi_out, hw_msg->low_out); hsz = (hw_msg->task_len1 + 1) * BYTE_BITS; first = *(struct wd_ecc_msg **)((uintptr_t)data + @@ -2332,7 +2332,6 @@ static int sm2_enc_parse(handle_t h_qp, memcpy(&src, first + 1, sizeof(src)); /* parse first sqe */ - hw_msg->low_tag = 0; /* use sync mode */ ret = ecc_sqe_parse((struct hisi_qp *)h_qp, first, hw_msg); if (ret) { WD_ERR("failed to parse first BD, ret = %d!\n", ret); @@ -2351,11 +2350,12 @@ static int sm2_enc_parse(handle_t h_qp, WD_ERR("failed to convert sm2 std format, ret = %d!\n", ret); goto free_second; } + free_second: free_req(second); free_first: free_req(first); - msg->tag = tag; + return ret; } @@ -2376,21 +2376,21 @@ static int sm2_dec_parse(handle_t ctx, struct wd_ecc_msg *msg, memcpy(&src, dst + 1, sizeof(src)); /* parse first sqe */ - hw_msg->low_tag = 0; /* use sync mode */ ret = ecc_sqe_parse((struct hisi_qp *)ctx, dst, hw_msg); if (ret) { WD_ERR("failed to parse decode BD, ret = %d!\n", ret); goto fail; } msg->result = dst->result; + msg->tag = tag; ret = sm2_convert_dec_out(&src, dst); if (unlikely(ret)) { WD_ERR("failed to convert sm2 decode out, ret = %d!\n", ret); goto fail; } + fail: - msg->tag = tag; free(dst->req.dst); free(dst); -- 2.30.0

1 2

sig-AccLib UADK周例会
by openEuler conference 31 May '22

31 May '22

您好！ sig-AccLib SIG 邀请您参加 2022-06-01 11:00 召开的Zoom会议会议主题：sig-AccLib UADK周例会会议内容： zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.进展讨论 2.自由讨论会议链接：https://us06web.zoom.us/j/82764528356?pwd=WWZ0eUEzdDQ4OUR6RURqOEJheTJyQT09 会议纪要：https://etherpad.openeuler.org/p/sig-AccLib-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler sig-AccLib SIG invites you to attend the Zoom conference will be held at 2022-06-01 11:00, The subject of the conference is sig-AccLib UADK周例会, Summary: zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.进展讨论 2.自由讨论 You can join the meeting at https://us06web.zoom.us/j/82764528356?pwd=WWZ0eUEzdDQ4OUR6RURqOEJheTJyQT09. Add topics at https://etherpad.openeuler.org/p/sig-AccLib-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH 0/9] uadk: some misc fixes
by Weili Qian 31 May '22

31 May '22

These patches move some redundant codes to wd_utils from wd_<alg>.c, and remove the unnecessary locks in wd_<alg>.c. Weili Qian (9): uadk: move parameter check into wd_util.c comp: remove unused variable priv dh: remove the lock in async send ecc: remove the lock in async send funciton comp: remove the lock in async send dh: remove repeated send BD ecc: remove repeated send BD rsa: remove repeated send BD uadk: move send and recv code into wd_util.c drv/hisi_comp.c | 7 +-- drv/hisi_hpre.c | 18 ++++--- drv/hisi_sec.c | 44 +++++++++------ include/drv/wd_aead_drv.h | 4 +- include/drv/wd_cipher_drv.h | 4 +- include/drv/wd_comp_drv.h | 4 +- include/drv/wd_dh_drv.h | 4 +- include/drv/wd_digest_drv.h | 4 +- include/drv/wd_ecc_drv.h | 4 +- include/drv/wd_rsa_drv.h | 4 +- include/wd_util.h | 26 +++++++++ wd_aead.c | 52 +++--------------- wd_cipher.c | 53 +++--------------- wd_comp.c | 62 ++++----------------- wd_dh.c | 104 ++++++----------------------------- wd_digest.c | 62 +++++---------------- wd_ecc.c | 105 +++++++----------------------------- wd_rsa.c | 104 +++++++---------------------------- wd_util.c | 67 +++++++++++++++++++++++ 19 files changed, 244 insertions(+), 488 deletions(-) -- 2.33.0

1 9

[PATCH v2 0/3] Add uadk compression and crypto PMD
by Zhangfei Gao 26 May '22

26 May '22

UADK compression PMD provides poll mode compression & decompression driver UADK crypto PMD provides poll mode driver All cryptography operations are using UADK crypto API. All compression operations are using UADK compress API. Hardware accelerators using UADK are supposed to be supported. Code put in https://github.com/Linaro/dpdk/tree/21.11-uadk-upstream-v2 v2: change to sudo dpdk-test --vdev=compress_uadk sudo dpdk-test --vdev=crypto_uadk Assume same properties are using in different platforms. Will introduce platform info later when required from sudo dpdk-test --vdev=0000:75:00.0 sudo dpdk-test --vdev=0000:76:00.0 v1: Target to DPDK 22.11 Rebased on http://git.dpdk.org/next/dpdk-next-crypto/ Suggested from Akhil Goyal <gakhil(a)marvell.com> > Current release cycle is DPDK-22.07 for which this patchset is late. > As we had the V1 deadline last month. > This patchset can go for next release cycle which is 22.11. Zhangfei Gao (3): compress/uadk: add uadk compression PMD test/crypto: add cryptodev_uadk_autotest crypto/uadk: add uadk crypto PMD app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/compressdevs/index.rst | 1 + doc/guides/compressdevs/uadk.rst | 64 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 70 ++ drivers/compress/meson.build | 1 + drivers/compress/uadk/meson.build | 28 + drivers/compress/uadk/uadk_compress_pmd.c | 482 +++++++++ drivers/compress/uadk/version.map | 3 + drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 28 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1134 +++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 14 files changed, 1824 insertions(+) create mode 100644 doc/guides/compressdevs/uadk.rst create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/compress/uadk/meson.build create mode 100644 drivers/compress/uadk/uadk_compress_pmd.c create mode 100644 drivers/compress/uadk/version.map create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.36.1

1 3

[PATCH v1 0/3] Add uadk compression and crypto PMD
by Zhangfei Gao 25 May '22

25 May '22

Supported hardware platforms: HiSilicon Kunpeng920 and Kunpeng930 The PMD relies on uadk Interface: https://github.com/Linaro/uadk Code put in https://github.com/Linaro/dpdk/tree/21.11-uadk-upstream-v1 v1: Target to DPDK 22.11 Rebased on http://git.dpdk.org/next/dpdk-next-crypto/ Suggested from Akhil Goyal <gakhil(a)marvell.com> > Current release cycle is DPDK-22.07 for which this patchset is late. > As we had the V1 deadline last month. > This patchset can go for next release cycle which is 22.11. Zhangfei Gao (3): compress/uadk: add uadk compression PMD test/crypto: add cryptodev_uadk_autotest crypto/uadk: add uadk crypto PMD app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/compressdevs/index.rst | 1 + doc/guides/compressdevs/uadk.rst | 69 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 80 ++ drivers/compress/meson.build | 1 + drivers/compress/uadk/meson.build | 28 + drivers/compress/uadk/uadk_compress_pmd.c | 500 +++++++++ drivers/compress/uadk/version.map | 3 + drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 36 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1169 +++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 14 files changed, 1900 insertions(+) create mode 100644 doc/guides/compressdevs/uadk.rst create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/compress/uadk/meson.build create mode 100644 drivers/compress/uadk/uadk_compress_pmd.c create mode 100644 drivers/compress/uadk/version.map create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.36.1

2 6

UADK + MD5 软加速集成设计
by Guodong Xu 24 May '22

24 May '22

Hi, All Attached please find the draft design. Let me know what you think. Thanks. BR, Guodong

3 2

UADK周例会
by openEuler conference 17 May '22

17 May '22

您好！ sig-AccLib SIG 邀请您参加 2022-05-18 11:00 召开的Zoom会议会议主题：UADK周例会会议内容： ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 议题： 1.异步收发线程增加sem机制 2.zlib wrap接口会议链接：https://us06web.zoom.us/j/82890916493?pwd=d2dEaDFXcjQ3aE9xV0JicjVPL3IwQT09 会议纪要：https://etherpad.openeuler.org/p/sig-AccLib-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler sig-AccLib SIG invites you to attend the Zoom conference will be held at 2022-05-18 11:00, The subject of the conference is UADK周例会, Summary: ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 议题： 1.异步收发线程增加sem机制 2.zlib wrap接口 You can join the meeting at https://us06web.zoom.us/j/82890916493?pwd=d2dEaDFXcjQ3aE9xV0JicjVPL3IwQT09. Add topics at https://etherpad.openeuler.org/p/sig-AccLib-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH 1/2] cipher: adding an iv update to a decryption
by Kai Ye 12 May '22

12 May '22

Adding an iv update to de-crypto method as cbc mode. the dst address should not be changed. So fix it. Signed-off-by: Kai Ye <yekai13(a)huawei.com> --- src/uadk_cipher.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/src/uadk_cipher.c b/src/uadk_cipher.c index 8a2c39d..5dd2178 100644 --- a/src/uadk_cipher.c +++ b/src/uadk_cipher.c @@ -764,8 +764,9 @@ static void uadk_cipher_update_priv_ctx(struct cipher_priv_ctx *priv) switch (priv->setup.mode) { case WD_CIPHER_CBC: if (priv->req.op_type == WD_CIPHER_ENCRYPTION) { - priv->req.dst += priv->req.in_bytes; - memcpy(priv->iv, priv->req.dst - iv_bytes, iv_bytes); + memcpy(priv->iv, priv->req.dst + priv->req.in_bytes - iv_bytes, iv_bytes); + } else { + memcpy(priv->iv, priv->req.src + priv->req.in_bytes - iv_bytes, iv_bytes); } break; case WD_CIPHER_OFB: @@ -777,11 +778,9 @@ static void uadk_cipher_update_priv_ctx(struct cipher_priv_ctx *priv) break; case WD_CIPHER_CFB: if (priv->req.op_type == WD_CIPHER_ENCRYPTION) { - priv->req.dst += priv->req.in_bytes; - memcpy(priv->iv, priv->req.dst - iv_bytes, iv_bytes); + memcpy(priv->iv, priv->req.dst + priv->req.in_bytes - iv_bytes, iv_bytes); } else { - priv->req.src += priv->req.in_bytes; - memcpy(priv->iv, priv->req.src - iv_bytes, iv_bytes); + memcpy(priv->iv, priv->req.src + priv->req.in_bytes - iv_bytes, iv_bytes); } break; case WD_CIPHER_CTR: -- 2.33.0

1 1

UADK周例会
by openEuler conference 19 Apr '22

19 Apr '22

您好！ sig-AccLib SIG 邀请您参加 2022-04-20 11:00 召开的ZOOM会议会议主题：UADK周例会会议内容：会议链接：https://linaro-org.zoom.us/j/91879279131 邮件列表：acc(a)openeuler.xn--org,-325fl19d9e1dyuu0lv. 1.需求进展。2.自由讨论。会议链接：https://us06web.zoom.us/j/84784486453?pwd=dzJ2N1BldjcyVUswOGk2cmpvZUhtUT09 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler sig-AccLib SIG invites you to attend the ZOOM conference will be held at 2022-04-20 11:00, The subject of the conference is UADK周例会, Summary: 会议链接：https://linaro-org.zoom.us/j/91879279131 邮件列表：acc(a)openeuler.xn--org,-325fl19d9e1dyuu0lv. 1.需求进展。2.自由讨论。 You can join the meeting at https://us06web.zoom.us/j/84784486453?pwd=dzJ2N1BldjcyVUswOGk2cmpvZUhtUT09. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

openEuler ODD SIG-AccLib 会议通知详情 [4月14日上午 10:00-12:00]
by fanghao (A) 13 Apr '22

13 Apr '22

Hello everyone, 4月14日SIG组工作会议会前提醒： sig-AccLib：会议时间：4月14日 10:00-12:00 参会链接： https://us06web.zoom.us/j/82166003143?pwd=UjV5cDkra0xqYXJXazdyMGxiRTIwdz09 文档链接： https://etherpad.openeuler.org/p/openEuler2209-sig-AccLib-ODD 注意事项 1、请确保关键与会人员知悉参会链接，并提前5-10min进场。 2、确保准时结束会议，延后会影响后面SIG工作组会议的召开。 3、会前及时把议题内容更新到etherpad。 4、会中请务必安排人员进行会议纪要，会议纪要需要更新到etherpad。 Thanks, Hao

1 0

[RFC 0/2] UADK/comp add uadk wrapper for zlib
by Yang Shen 06 Apr '22

06 Apr '22

Add uadk wrapper for zlib. And to adapt for zlib, add a new api for wd_comp. Yang Shen (2): uadk/comp - support reset session zlibwrapper: add zlibwrapper to adapt for zlib interface Makefile.am | 2 +- include/wd_comp.h | 6 + wd_comp.c | 15 ++ wd_zlibwrapper.c | 472 ++++++++++++++++++++++++++++++++++++++++++++++ wd_zlibwrapper.h | 87 +++++++++ 5 files changed, 581 insertions(+), 1 deletion(-) create mode 100644 wd_zlibwrapper.c create mode 100644 wd_zlibwrapper.h -- 2.24.0

1 2

openEuler Developer Day 2022- AccLib SIG专场工作会议需求收集
by fanghao (A) 03 Apr '22

03 Apr '22

Hello everyone, openEuler Developer Day 2022 （简称 ODD 2022），会议介绍 https://www.openeuler.org/zh/interaction/summit-list/devday2022/ 大会第二天4月14日将会是SIG的专场直播会议，SIG组围绕22.09版本规划开展工作会议。现在是需求问题收集阶段，大家可以提前在etherpad上编辑共享文档的方式提交讨论议题。 1、编辑参会人员信息。 2、编辑议题。链接如下： https://etherpad.openeuler.org/p/openEuler2209-sig-AccLib-ODD Thanks. Hao Fang

1 1

[PATCH] cipher: optimize the process of ctx initialization
by Kai Ye 02 Apr '22

02 Apr '22

Optimize the process of ctx initialization as switching to soft work. If the ctx resources of a thread are insufficient at the beginning, the thread can't apply for resources again. Therefore, an flag checking is required. Signed-off-by: Kai Ye <yekai13(a)huawei.com> --- src/uadk_cipher.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/src/uadk_cipher.c b/src/uadk_cipher.c index 5ebad64..be75233 100644 --- a/src/uadk_cipher.c +++ b/src/uadk_cipher.c @@ -847,8 +847,8 @@ static void uadk_e_ctx_init(EVP_CIPHER_CTX *ctx, struct cipher_priv_ctx *priv) struct sched_params params = {0}; int ret; - priv->req.iv_bytes = EVP_CIPHER_CTX_iv_length(ctx); - priv->req.iv = priv->iv; + if (priv->switch_flag == UADK_DO_SOFT) + return; ret = uadk_e_init_cipher(); if (unlikely(!ret)) { @@ -857,6 +857,9 @@ static void uadk_e_ctx_init(EVP_CIPHER_CTX *ctx, struct cipher_priv_ctx *priv) return; } + priv->req.iv_bytes = EVP_CIPHER_CTX_iv_length(ctx); + priv->req.iv = priv->iv; + /* * The internal RR scheduler used by environment variables, * the cipher algorithm does not distinguish between -- 2.33.0

1 0

[PATCH] drv/sec - modification for clean code
by Kai Ye 01 Apr '22

01 Apr '22

1. Delete some debug code. Debug code is not allowed in the release version. 2. Fix a code style issue in sec drv exit. Signed-off-by: Kai Ye <yekai13(a)huawei.com> --- drv/hisi_sec.c | 67 ++++++-------------------------------------------- 1 file changed, 7 insertions(+), 60 deletions(-) diff --git a/drv/hisi_sec.c b/drv/hisi_sec.c index 16fcb5f..96a2e3c 100644 --- a/drv/hisi_sec.c +++ b/drv/hisi_sec.c @@ -486,20 +486,6 @@ static int g_hmac_a_alg[WD_DIGEST_TYPE_MAX] = { int hisi_sec_init(struct wd_ctx_config_internal *config, void *priv); void hisi_sec_exit(void *priv); -#ifdef DEBUG -static void sec_dump_bd(unsigned char *bd, unsigned int len) -{ - unsigned int i; - - for (i = 0; i < len; i++) { - WD_ERR("\\0x%02x", bd[i]); - if ((i + 1) % WORD_BYTES == 0) - WD_ERR("\n"); - } - WD_ERR("\n"); -} -#endif - /* increment counter (128-bit int) by software */ static void ctr_iv_inc(__u8 *counter, __u32 c) { @@ -1290,11 +1276,6 @@ static void parse_digest_bd2(struct hisi_sec_sqe *sqe, recv_msg->data_fmt = hisi_sec_get_data_fmt_v2(sqe->sds_sa_type); recv_msg->in = (__u8 *)(uintptr_t)sqe->type2.data_src_addr; recv_msg->alg_type = WD_DIGEST; - -#ifdef DEBUG - WD_ERR("Dump digest recv sqe-->!\n"); - sec_dump_bd((unsigned char *)sqe, SQE_BYTES_NUMS); -#endif } static int digest_long_bd_check(struct wd_digest_msg *msg) @@ -1389,11 +1370,6 @@ int hisi_sec_digest_send(handle_t ctx, struct wd_digest_msg *msg) qm_fill_digest_long_bd(msg, &sqe); -#ifdef DEBUG - WD_ERR("Dump digest send sqe-->!\n"); - sec_dump_bd((unsigned char *)&sqe, SQE_BYTES_NUMS); -#endif - sqe.type2.tag = msg->tag; ret = hisi_qm_send(h_qp, &sqe, 1, &count); if (ret < 0) { @@ -1545,11 +1521,6 @@ int hisi_sec_digest_send_v3(handle_t ctx, struct wd_digest_msg *msg) qm_fill_digest_long_bd3(msg, &sqe); -#ifdef DEBUG - WD_ERR("Dump digest send sqe-->!\n"); - sec_dump_bd((unsigned char *)&sqe, SQE_BYTES_NUMS); -#endif - sqe.tag = (__u64)(uintptr_t)msg->tag; ret = hisi_qm_send(h_qp, &sqe, 1, &count); @@ -1590,11 +1561,6 @@ static void parse_digest_bd3(struct hisi_sec_sqe3 *sqe, recv_msg->data_fmt = hisi_sec_get_data_fmt_v3(sqe->bd_param); recv_msg->in = (__u8 *)(uintptr_t)sqe->data_src_addr; recv_msg->alg_type = WD_DIGEST; - -#ifdef DEBUG - WD_ERR("Dump digest recv sqe-->!\n"); - sec_dump_bd((unsigned char *)sqe, SQE_BYTES_NUMS); -#endif } int hisi_sec_digest_recv_v3(handle_t ctx, struct wd_digest_msg *recv_msg) @@ -1894,11 +1860,6 @@ int hisi_sec_aead_send(handle_t ctx, struct wd_aead_msg *msg) fill_aead_bd2_addr(msg, &sqe); -#ifdef DEBUG - WD_ERR("Dump aead send sqe-->!\n"); - sec_dump_bd((unsigned char *)&sqe, SQE_BYTES_NUMS); -#endif - sqe.type2.tag = (__u16)msg->tag; ret = hisi_qm_send(h_qp, &sqe, 1, &count); @@ -1948,11 +1909,6 @@ static void parse_aead_bd2(struct hisi_sec_sqe *sqe, SEC_AUTH_LEN_MASK; recv_msg->out_bytes = sqe->type2.clen_ivhlen + sqe->type2.cipher_src_offset; - -#ifdef DEBUG - WD_ERR("Dump aead recv sqe-->!\n"); - sec_dump_bd((unsigned char *)sqe, SQE_BYTES_NUMS); -#endif } int hisi_sec_aead_recv(handle_t ctx, struct wd_aead_msg *recv_msg) @@ -2163,11 +2119,6 @@ int hisi_sec_aead_send_v3(handle_t ctx, struct wd_aead_msg *msg) fill_aead_bd3_addr(msg, &sqe); -#ifdef DEBUG - WD_ERR("Dump aead send sqe-->!\n"); - sec_dump_bd((unsigned char *)&sqe, SQE_BYTES_NUMS); -#endif - sqe.tag = msg->tag; ret = hisi_qm_send(h_qp, &sqe, 1, &count); if (ret < 0) { @@ -2216,11 +2167,6 @@ static void parse_aead_bd3(struct hisi_sec_sqe3 *sqe, SEC_MAC_LEN_MASK; recv_msg->out_bytes = sqe->c_len_ivin + sqe->cipher_src_offset; - -#ifdef DEBUG - WD_ERR("Dump aead recv sqe-->!\n"); - sec_dump_bd((unsigned char *)sqe, SQE_BYTES_NUMS); -#endif } int hisi_sec_aead_recv_v3(handle_t ctx, struct wd_aead_msg *recv_msg) @@ -2305,16 +2251,17 @@ out: void hisi_sec_exit(void *priv) { - if (!priv) { - WD_ERR("hisi sec exit input parameter is err!\n"); - return; - } - struct hisi_sec_ctx *sec_ctx = priv; - struct wd_ctx_config_internal *config = &sec_ctx->config; + struct wd_ctx_config_internal *config; handle_t h_qp; int i; + if (!sec_ctx) { + WD_ERR("hisi sec exit input parameter is err!\n"); + return; + } + + config = &sec_ctx->config; for (i = 0; i < config->ctx_num; i++) { h_qp = (handle_t)wd_ctx_get_priv(config->ctxs[i].ctx); hisi_qm_free_qp(h_qp); -- 2.33.0

1 0

[PATCH] utils: add glibc version checking for uadk_memcpy
by Kai Ye 01 Apr '22

01 Apr '22

No assembly language is required as glibc version >= 2.32. This is because the later glibc version has updated this optimization. Signed-off-by: Kai Ye <yekai13(a)huawei.com> --- src/uadk_utils.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/src/uadk_utils.c b/src/uadk_utils.c index 2b34b3a..6e91ba2 100644 --- a/src/uadk_utils.c +++ b/src/uadk_utils.c @@ -14,9 +14,20 @@ * limitations under the License. * */ +#include <gnu/libc-version.h> #include "uadk_utils.h" -#define UADK_MEM_IMPROVE_THRESHOLD 1024 +#define GLIBC_MAIN 2U +#define GLIBC_MINOR 32U +#define UADK_MEM_IMPROVE_THRESHOLD 1024U + +#if __ARM_NEON && defined(__GLIBC__) && defined(__GLIBC_MINOR__) +#define LIBC_VERSION_PREREQ(major, minor) \ + ((__GLIBC__ * 10000 + __GLIBC_MINOR__ * 100) < \ + (major * 10000 + minor * 100)) +#else +#define LIBC_VERSION_PREREQ(major, minor) 0 +#endif static void *memcpy_large(void *dstpp, const void *srcpp, size_t len) { @@ -56,7 +67,9 @@ static void *memcpy_large(void *dstpp, const void *srcpp, size_t len) void *uadk_memcpy(void *dstpp, const void *srcpp, size_t len) { - if (len >= UADK_MEM_IMPROVE_THRESHOLD) + /* No assembly language is required as glibc version >= 2.32 */ + if (len >= UADK_MEM_IMPROVE_THRESHOLD && + LIBC_VERSION_PREREQ(GLIBC_MAIN, GLIBC_MINOR)) return memcpy_large(dstpp, srcpp, len); else return memcpy(dstpp, srcpp, len); -- 2.33.0

3 2

[PATCH 1/2] uadk: Add quick start document for UADK
by Zhiqi Song 01 Apr '22

01 Apr '22

A quick start document is added to help users of OpenEuler quickly start using UADK and UADK engine. Signed-off-by: Zhiqi Song <songzhiqi1(a)huawei.com> --- UADK_quick_start.md | 567 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 567 insertions(+) create mode 100644 UADK_quick_start.md diff --git a/UADK_quick_start.md b/UADK_quick_start.md new file mode 100644 index 00000000..64d070b6 --- /dev/null +++ b/UADK_quick_start.md @@ -0,0 +1,567 @@ +# UADK �� +- [UADK ��](#uadk-��) + - [1 ��](#1-��) + - [1.1 UADK](#11-uadk) + - [1.2 UADK engine](#12-uadk-engine) + - [1.3 ��](#13-��) + - [2 ��](#2-��) + - [2.1 ��](#21-��) + - [2.2 ��](#22-��) + - [2.2.1 ��](#221-��) + - [2.2.2 ��](#222-��) + - [2.3 ��](#23-��) + - [3 ��](#3-��) + - [3.1 UADK ��](#31-uadk-��) + - [3.1.1 yum��](#311-yum��) + - [3.1.2 RPM��](#312-rpm��) + - [3.1.3 ��](#313-��) + - [3.2 ��UACCE��](#32-��uacce��) + - [3.3 ��](#33-��) + - [3.4 ��](#34-��) + - [3.5 UADK engine ��](#35-uadk-engine-��) + - [3.5.1 yum��](#351-yum��) + - [3.5.2 RPM��](#352-rpm��) + - [3.5.3 ��](#353-��) + - [4 ��](#4-��) + - [4.1 ��UADK](#41-��uadk) + - [4.1.1 ��](#411-��) + - [4.1.2 ��](#412-��) + - [4.2 ��UADK engine](#42-��uadk-engine) + - [4.2.1 ��](#421-��) + - [4.2.2 ��](#422-��) +---- + +## 1 �� +��UADK �� UADK engine�� +��UADK ��UADK engine�� +### 1.1 UADK +UADK��User Space Accelerator Development Kit��SVA��Shared Virtual Address��UADK��UACCE��Unified/User-space-access-intended Accelerator Framework��SVA��UADK�� + +UADK��UACCE��SVA��IOMMU��SVA��UACCE��,��UADK�� +- AES��SM4��DES��SM3��SHAx��MD5��AEAD��HMAC�� +- RSA��DH�� +- gzip��zlib�� + +��Kunpeng��UACCE��UADK��CPU��CPU�� +### 1.2 UADK engine +UADK engine��UADK��OpenSSL��engine��UADK engine��OpenSSL��OpenSSL�� + +UADK engine��RSA engine��DH engine��ECC engine��Cipher engine��Digest engine��5��UADK��UADK engine��OpenSSL��OpenSSL��engine id��uadk_engine��UADK engine�� +- RSA engine�� +- DH engine�� +- Cipher engine�� +- Digest engine�� + +��Kunpeng��UADK��OpenSSL��OpenSSL��UADK engine��Kunpeng�� + +### 1.3 �� +�� Web�� + +----------- + +## 2 �� +��Kunpeng��UADK��UADK engine�� +### 2.1 �� +��UADK��Kunpeng��9xx��CPU �� +### 2.2 �� +#### 2.2.1 �� +OpenEuler 22.03�� +��IOMMU & SVA�� +#### 2.2.2 �� +OpenSSL 1.1.1a�� +### 2.3 �� +��UADK ��UADK engine �� + +gcc version 10.2.0 (GCC) + +-------- + +## 3 �� +��Kunpeng��UADK��UADK engine�� +��Kunpeng��UADK�� +### 3.1 UADK �� +UADK��yum��RPM�� +#### 3.1.1 yum�� +��OpenEuler 22.03��yum�� +``` +yum install libwd +``` +#### 3.1.2 RPM�� +��OpenEuler��UADK rpm��https://gitee.com/src-openeuler/libwd + +�� +``` +cd /usr/src/ + +git clone https://gitee.com/src-openeuler/libwd.git + +mkdir -p /root/rpmbuild + +cd /root/rpmbuild + +mkdir BUILD BUILDROOT RPMS SOURCES SPECS SRPMS + +cp /usr/src/libwd/libwd*.tar.gz /usr/src/libwd/*patch /root/rpmbuild/SOURCES/ + +cp /usr/src/libwd/warpdrive.spec /root/rpmbuild/SPECS/ + +rpmbuild --bb SPECS/warpdrive.spec + +rpm -ivh /root/rpmbuild/RPMS/aarch64/libwd*.rpm +``` +#### 3.1.3 �� +��Linaro��UADK��https://github.com/Linaro/uadk + +�� +https://github.com/Linaro/uadk/blame/master/INSTALL + +### 3.2 ��UACCE�� +��uacce.ko�� + +��```modprobe uacce``` ��```insmod /lib/modules/$(uname -r)/uacce.ko``` + +### 3.3 �� +��Kunpeng�� + +| �� | �� | +|---|---| +HPRE|uacce.ko, hisi_qm.ko, hisi_hpre.ko| +ZIP|uacce.ko, hisi_qm.ko, hisi_zip.ko| +SEC|uacce.ko, hisi_qm.ko, hisi_sec2.ko| + +�� +hisi_hpre.ko/hisi_zip.ko/hisi_sec2.ko��uacce_mode��uacce_mode=1��SVA��uacce_mode=2��no-SVA�� +��Kunpeng��uacce��uacce.ko��Kunpeng��ZIP��HPRE��SEC��QM��uacce.ko��hisi_qm.ko��ZIP��HPRE��SEC�� + +��insmod��modprobe�� + +modprobe�� +- ��HPRE��SVA�� + ``` + modprobe hisi_hpre uacce_mode=1 + ``` +- ��SEC��SVA�� + ``` + modprobe hisi_sec2 uacce_mode=1 + ``` +- ��ZIP��SVA�� + ``` + modprobe hisi_zip uacce_mode=1 + ``` + +insmod�� +- ��HPRE��SVA�� + ``` + insmod /lib/modules/$(uname -r)/uacce.ko + insmod /lib/modules/$(uname -r)/hisi_qm.ko + insmod /lib/modules/$(uname -r)/hisi_zip.ko uacce_mode=1 + ``` + +- ��SEC��SVA�� + ``` + insmod /lib/modules/$(uname -r)/uacce.ko + insmod /lib/modules/$(uname -r)/hisi_qm.ko + insmod /lib/modules/$(uname -r)/hisi_sec2.ko uacce_mode=1 + ``` + +- ��ZIP��SVA�� + ``` + insmod /lib/modules/$(uname -r)/uacce.ko + insmod /lib/modules/$(uname -r)/hisi_qm.ko + insmod /lib/modules/$(uname -r)/hisi_hpre.ko uacce_mode=1 + ``` +�� + +��```cat /sys/bus/pci/drivers/<driver>/module/parameters/``` �� + +- �� + ``` + insmod <driver> [uacce_mode] [pf_q_num] [vfs_num] [sgl_sge_nr] [ctx_q_num] + ``` + + ``` + modprobe <driver_name> [uacce_mode] [pf_q_num] [vfs_num] [sgl_sge_nr] [ctx_q_num] + ``` + - []�� + - ��uacce_mode��0��uacce_mode=1�� + - SEC��pf_q_num��256��HPRE/ZIP��pf_q_num��64�� + - ��vfs_num��0�� + - ��sgl_sge_nr��10�� + - ��ctx_q_num��2�� + + ��ZIP�� + ``` + insmod /lib/modules/$(uname -r)/hisi_zip.ko uacce_mode=1 pf_q_num =16 vfs_num=1 sgl_sge_nr=16 + ``` + - ��SVA��uacce_mode=1�� + +### 3.4 �� +��Kunpeng�� +``` +modprobe -r hisi_hpre +``` +�� +``` +rmmod hisi_hpre +``` + +### 3.5 UADK engine �� +UADK engine��yum��RPM�� +#### 3.5.1 yum�� +��OpenEuler 22.03��yum�� +``` +yum install uadk_engine +``` +#### 3.5.2 RPM�� +��OpenEuler��uadk_engine rpm��https://gitee.com/src-openeuler/uadk_engine + +�� +``` +cd /usr/src/ + +git clone https://gitee.com/src-openeuler/uadk_engine.git + +mkdir -p /root/rpmbuild + +cd /root/rpmbuild + +mkdir BUILD BUILDROOT RPMS SOURCES SPECS SRPMS + +cp /usr/src/uadk_engine/uadk_engine*.tar.gz /usr/src/uadk_engine/*patch /root/rpmbuild/SOURCES/ + +cp /usr/src/uadk_engine/uadk_engine.spec /root/rpmbuild/SPECS/ + +rpmbuild --bb SPECS/uadk_engine.spec + +rpm -ivh /root/rpmbuild/RPMS/aarch64/uadk_engine*.rpm --prefix=/usr/local/openssl/lib/engines-1.1 + +``` +#### 3.5.3 �� +��Linaro��UADK engine��https://github.com/Linaro/uadk_engine + +�� +https://github.com/Linaro/uadk_engine/blob/master/README + +----------- + +## 4 �� +### 4.1 ��UADK +UADK��UADK��uadk_tool��```uadk_tool benchmark --help```�� +#### 4.1.1 �� +��export��: +``` +export WD_RSA_CTX_NUM="sync:2@0,async:4@0" +export WD_DH_CTX_NUM="sync:2@0,async:4@0" +export WD_CIPHER_CTX_NUM="sync:2@2,async:4@2" +export WD_DIGEST_CTX_NUM="sync:2@2,async:4@2" +``` +��```ctx_mode:ctx_num@node```��node��numa��ctx_num��ctx_mode�� +��```"sync:2@0,async:4@0"```��numa 0��2��sync��4��async�� + +#### 4.1.2 �� +- MD5�� + + ��md5��SVA�� + ``` + uadk_tool benchmark --alg md5 --mode sva --opt 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 + ``` + +- SM3�� + + ��sm3��SVA�� + ``` + uadk_tool benchmark --alg sm3 --mode sva --opt 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 + ``` +- SHA�� + + ��sha-512��SVA�� + ``` + uadk_tool benchmark --alg sha-512 --mode sva --opt 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 + ``` +- AES�� + + ��aes-128-cbc��SVA�� + ``` + uadk_tool benchmark --alg aes-128-cbc --mode sva --opt 0 --sync --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 + ``` + ��aes-128-cbc��SVA�� + ``` + uadk_tool benchmark --alg aes-128-cbc --mode sva --opt 1 --sync --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 + ``` + +- SM4�� + + ��sm4-128-ecb��SVA�� + ``` + uadk_tool benchmark --alg sm4-128-ecb --mode sva --opt 0 --sync --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 + ``` + + ��sm4-128-ecb��SVA�� + ``` + uadk_tool benchmark --alg sm4-128-ecb --mode sva --opt 1 --sync --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 + ``` + +- DES�� + + ��3des-128-ecb��SVA�� + ``` + uadk_tool benchmark --alg 3des-128-ecb --mode sva --opt 0 --sync --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 + ``` + + ��3des-128-ecb��SVA�� + ``` + uadk_tool benchmark --alg 3des-128-ecb --mode sva --opt 1 --sync --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 + ``` +��```uadk_tool benchmark --help```�� + +### 4.2 ��UADK engine +��openssl��uadk engine��openssl�� +#### 4.2.1 �� +UADK engine�� +1. ��openssl.cnf��/usr/local/ssl/�� + ``` + openssl_cnf = openssl_def + [openssl_def] + engines = engine_section + [engine_section] + uadk_engine = uadk_section + [uadk_section] + UADK_CMD_ENABLE_RSA_ENV = 1 + UADK_CMD_ENABLE_DH_ENV = 1 + UADK_CMD_ENABLE_CIPHER_ENV = 1 + UADK_CMD_ENABLE_DIGEST_ENV = 1 + ``` + +2. ��export�� + ``` + export WD_RSA_CTX_NUM="sync:2@0,async:4@0" + export WD_DH_CTX_NUM="sync:2@0,async:4@0" + export WD_CIPHER_CTX_NUM="sync:2@2,async:4@2" + export WD_DIGEST_CTX_NUM="sync:2@2,async:4@2" + ``` + ��```ctx_mode:ctx_num@node```��node��numa��ctx_num��ctx_mode�� +��```"sync:2@0,async:4@0"```��numa 0��2��sync��4��async�� + +#### 4.2.2 �� +- RSA�� + + �� + ``` + openssl genrsa -out prikey.pem -engine uadk_engine 1024 + ``` + �� + ``` + openssl rsa -in prikey.pem -pubout -out pubkey.pem -engine uadk_engine + ``` + ��plain.txt: + ``` + echo "Content to be encrypted" > plain.txt + ``` + �� + ``` + openssl rsautl -encrypt -in plain.txt -inkey pubkey.pem -pubin -out enc.txt -engine uadk_engine + ``` + �� + ``` + openssl rsautl -decrypt -in enc.txt -inkey prikey.pem -out dec.txt -engine uadk_engine + ``` + ��msg.txt: + ``` + echo "Content to be signed" > msg.txt + ``` + �� + ``` + openssl rsautl -sign -in msg.txt -inkey prikey.pem -out signed.txt -engine uadk_engine + ``` + �� + ``` + openssl rsautl -verify -in signed.txt -inkey pubkey.pem -pubin -out verified.txt -engine uadk_engine + ``` + ��openssl speed�� + ``` + openssl speed -elapsed -engine uadk_engine rsa1024 + openssl speed -elapsed -engine uadk_engine -async_jobs 10 rsa1024 + openssl speed -elapsed -engine uadk_engine -async_jobs 36 rsa1024 + ``` +- DH�� + + �� + ``` + openssl dhparam -out dhparam.pem 768 + ``` + ��Alice��: + ``` + openssl genpkey -paramfile dhparam.pem -out alice_prikey.pem -engine uadk_engine + ``` + ��Alice�� + ``` + openssl pkey -in alice_prikey.pem -pubout -out alice_pubkey.pem + ``` + ��Bob�� + ``` + openssl genpkey -paramfile dhparam.pem -out bob_prikey.pem -engine uadk_engine + ``` + ��Bob�� + ``` + openssl pkey -in bob_prikey.pem -pubout -out bob_pubkey.pem + ``` + �� + ``` + openssl pkeyutl -derive -inkey alice_prikey.pem -peerkey bob_pubkey.pem -out secret1.bin -engine uadk_engine + openssl pkeyutl -derive -inkey bob_prikey.pem -peerkey alice_pubkey.pem -out secret2.bin -engine uadk_engine + ``` + �� + ``` + cmp secret1.bin secret2.bin + xxd secret1.bin + xxd secret2.bin + ``` +- MD5�� + + ��data.txt�� + ``` + echo "Content to be hashed" > data.txt + ``` + �� + ``` + openssl md5 -engine uadk_engine data.txt + ``` + openssl speed�� + ``` + openssl speed -engine uadk_engine -async_jobs 1 -evp md5 + ``` +- SM3�� + + ��data.txt�� + ``` + echo "Content to be hashed" > data.txt + ``` + �� + ``` + openssl sm3 -engine uadk_engine data.txt + ``` +- SHA�� + + ��data.txt�� + ``` + echo "Content to be hashed" > data.txt + ``` + �� + ``` + openssl sha1 -engine uadk_engine data.txt + openssl sha256 -engine uadk_engine data.txt + openssl sha512 -engine uadk_engine data.txt + ``` +- AES�� + + ��data.txt�� + ``` + echo "Content to be encrypted" > data + ``` + aes-128-cbc�� + ``` + openssl enc -aes-128-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + aes-128-cbc�� + ``` + openssl enc -aes-128-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + aes-192-cbc�� + ``` + openssl enc -aes-192-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + aes-192-cbc�� + ``` + openssl enc -aes-192-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + aes-256-cbc�� + ``` + openssl enc -aes-256-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + aes-256-cbc�� + ``` + openssl enc -aes-256-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + aes-128-ecb�� + ``` + openssl enc -aes-128-ecb -a -in data -out data.en -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-128-ecb�� + ``` + openssl enc -aes-128-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-192-ecb�� + ``` + openssl enc -aes-192-ecb -a -in data -out data.en -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-192-ecb�� + ``` + openssl enc -aes-192-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-256-ecb�� + ``` + openssl enc -aes-256-ecb -a -in data -out data.en -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-256-ecb�� + ``` + openssl enc -aes-256-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-128-ctr�� + ``` + openssl enc -aes-128-ctr -a -in data -out data.en -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-128-ctr�� + ``` + openssl enc -aes-128-ctr -a -d -in data.en -out data.de -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-192-ctr�� + ``` + openssl enc -aes-192-ctr -a -in data -out data.en -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-192-ctr�� + ``` + openssl enc -aes-192-ctr -a -d -in data.en -out data.de -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-256-ctr�� + ``` + openssl enc -aes-256-ctr -a -in data -out data.en -pass pass:123456 -K abc -engine uadk_engine -p + ``` + aes-256-ctr�� + ``` + openssl enc -aes-256-ctr -a -d -in data.en -out data.de -pass pass:123456 -K abc -engine uadk_engine -p + ``` +- SM4�� + + sm4-cbc�� + ``` + openssl enc -sm4-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + sm4-cbc�� + ``` + openssl enc -sm4-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + sm4-ecb�� + ``` + openssl enc -sm4-ecb -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + sm4-ecb�� + ``` + openssl enc -sm4-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` +- DES�� + + des-ede3-cbc�� + ``` + openssl enc -des-ede3-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + des-ede3-cbc�� + ``` + openssl enc -des-ede3-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + des-ede3-ecb�� + ``` + openssl enc -des-ede3-ecb -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p + ``` + des-ede3-ecb�� + ``` + openssl enc -des-ede3-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p -- 2.33.0

1 0

[PATCH] uadk: Add quick start document
by Zhiqi Song 30 Mar '22

30 Mar '22

A quick start document is added to help users quickly start using UADK and UADK engine. Signed-off-by: Zhiqi Song <songzhiqi1(a)huawei.com> --- UADK_quick_start.md | 802 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 802 insertions(+) create mode 100644 UADK_quick_start.md diff --git a/UADK_quick_start.md b/UADK_quick_start.md new file mode 100644 index 00000000..db2c0aca --- /dev/null +++ b/UADK_quick_start.md @@ -0,0 +1,802 @@ +# UADK �� +- [UADK ��](#uadk-��) + - [1 ��](#1-��) + - [2 ��](#2��) + - [2.1 ��](#21��) + - [2.2 ��](#22��) + - [2.2.1 ��](#221��) + - [2.2.2 ��](#222��) + - [2.3 ��](#23��) + - [3 ��](#3��) + - [3.1 ��UACCE��](#31��uacce��) + - [3.2 ��](#32��) + - [3.3 ��](#33��) + - [3.4 ��](#34��) + - [3.5 ��UACCE��](#35��uacce��) + - [3.6 ��](#36��) + - [3.7 UADK ��](#37uadk-��) + - [3.7.1 yum��](#371-yum��) + - [3.7.2 RPM��](#372-rpm��) + - [3.7.3 ��](#373-��) + - [3.8 UADK engine ��](#38uadk-engine-��) + - [3.8.1 yum��](#381-yum��) + - [3.8.2 RPM��](#382-rpm��) + - [3.8.3 ��](#383-��) + - [4 ��](#4��) + - [4.1 UADK](#41uadk) + - [4.1.1 ��](#411��) + - [4.1.2 ��RSA��](#412��rsa��) + - [4.1.3 ��DH��](#413��dh��) + - [4.1.4 ��ECDH��](#414��ecdh��) + - [4.1.5 ��ECXDH��](#415��ecxdh��) + - [4.1.6 ��ECDSA��](#416��ecdsa��) + - [4.1.7 ��SM2��](#417��sm2��) + - [4.1.8 ��MD5��](#418��md5��) + - [4.1.9 ��SM3��](#419��sm3��) + - [4.1.10 ��SHA��](#4110��sha��) + - [4.1.11 ��AES��](#4111��aes��) + - [4.1.12 ��SM4��](#4112��sm4��) + - [4.2 ��UADK engine](#42��uadk-engine) + - [4.2.1 ��](#421��) + - [4.2.2 ��RSA��](#422��rsa��) + - [4.2.3 ��DH��](#423��dh��) + - [4.2.4 ��ECDH��](#424��ecdh��) + - [4.2.5 ��ECXDH��](#425��ecxdh��) + - [4.2.6 ��ECDSA��](#426��ecdsa��) + - [4.2.7 ��SM2��](#427��sm2��) + - [4.2.8 ��MD5��](#428��md5��) + - [4.2.9 ��SM3��](#429��sm3��) + - [4.2.10 ��SHA��](#4210��sha��) + - [4.2.11 ��AES��](#4211��aes��) + - [4.2.12 ��SM4��](#4212��sm4��) + - [4.2.13 ��DES��](#4213��des��) +---- + +## 1 �� +��UADK �� UADK engine�� +��UADK ��UADK engine�� +### 1.1 **UADK** +UADK��User Space Accelerator Development Kit��SVA��Shared Virtual Address��**��**��UADK��UACCE��Unified/User-space-access-intended Accelerator Framework��**��SVA��UADK��**�� +��Kunpeng��UACCE��UADK��CPU��CPU�� +### 1.2 **UADK engine** +UADK engine��UADK��OpenSSL��engine��UADK engine��OpenSSL�� +��Kunpeng��UADK��OpenSSL��UADK engine��Kunpeng�� +### 1.3 UADK��&�� +UADK��UACCE��vendor driver��SVA��IOMMU��SVA�� +��UACCE��UADK�� +UADK�� +��Kunpeng��Kunpeng��UADK��UADK��Kunpeng��: +- AES��SM4��SM3��SHAx��AEAD��HMAC�� +- RSA��DH��ECDH��X25519��X448��SM2�� +- gzip��zlib��deflate��lz77_zstd�� +### 1.4 UADK engine��&�� +UADK engine��OpenSSL��RSA engine��DH engine��ECC engine��Cipher engine��Digest engine��5��UADK��UADK engine��OpenSSL ��engine id��uadk_engine�� +��Kunpeng��Kunpeng��UADK��OpenSSL�� +- RSA engine�� +- DH engine �� +- ECC engine �� +- Cipher engine�� +- Digest engine �� +### 1.5 UADK ��UADK engine�� +- �� +- �� +- �� +- Web�� + +----------- + +## 2 �� +��Kunpeng��UADK��UADK engine�� +### 2.1 �� +��UADK��Kunpeng��9xx��CPU �� +### 2.2 �� +#### 2.2.1 �� +OpenEuler�� +Ubuntu�� +CentOS�� +��IOMMU &SVA�� +#### 2.2.2 �� +OpenSSL 1.1.1a��OpenSSL1.1.1l�� +### 2.3 �� +��UADK ��UADK engine �� +gcc version 10.2.0 (GCC) + +-------- + +## 3 �� +��Kunpeng��UADK��UADK engine�� +��Kunpeng��UADK�� +### 3.1 ��UACCE�� +��UACCE��UACCE�� +�� ++ ��Linux�� +Linux��UACCE��Linux�� https://www.kernel.org/ +��UACCE�� + + UACCE�� + <linux /drivers/misc/uacce/> + ++ ��OpenEuler�� +OpenEuler��https://gitee.com/openeuler/kernel + + UACCE�� + <linux /drivers/misc/uacce/> + +### 3.2 �� +��Kunpeng�� +�� ++ ��Linux�� +��Kunpeng��HPRE��SEC��ZIP��Linux��Linux�� https://www.kernel.org/ +��Kunpeng�� + + ��Kunpeng�� + <linux/drivers/crypto/hisilicon/> + ++ ��OpenEuler�� +OpenEuler��https://gitee.com/openeuler/kernel + + ��Kunpeng�� +�� <linux/drivers/crypto/hisilicon/> +### 3.3 �� +��Kunpeng��Kunpeng��config�� + +�� +``` +CONFIG_CRYPTO_DEV_HISI_QM=m +CONFIG_CRYPTO_DEV_HISI_ZIP=m +CONFIG_CRYPTO_DEV_HISI_HPRE=m +CONFIG_CRYPTO_DEV_HISI_SEC2=m +CONFIG_CRYPTO_DEV_HISI_TRNG=m +CONFIG_CRYPTO_DEV_HISI_MIGRATION=m +``` +�� +``` +CONFIG_UACCE=m +``` +��ZIP��HPRE��SEC��TRNG�� + +��SVA�� +``` +CONFIG_IOMMU_SVA_LIB=y +CONFIG_ARM_SMMU_V3_SVA=y +CONFIG_IOMMU_PAGE_FAULT=y +CONFIG_IOMMU_SUPPORT=y +CONFIG_PCI_PASID=y +CONFIG_IOMMU_SVA=y +``` + +�� +``` +CONFIG_VFIO=m +CONFIG_VFIO_PCI=m +``` +### 3.4 �� + +| �� | �� | +|:---|:---| +X86|make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-| +ARM|make ARCH=arm64| + +��kernel�� +### 3.5 ��UACCE�� +��uacce.ko�� +### 3.6 �� +��Kunpeng�� + +| �� | �� | +|---|---| +HPRE|uacce.ko, hisi_qm.ko, hisi_hpre.ko| +ZIP|uacce.ko, hisi_qm.ko, hisi_zip.ko| +SEC|uacce.ko, hisi_qm.ko, hisi_sec2.ko| + +�� +hisi_hpre.ko/hisi_zip.ko/hisi_sec2.ko��uacce_mode��uacce_mode=1��SVA��uacce_mode=2��no-SVA�� +ZIP��HPRE��SEC��QM��hisi_qm.ko��Kunpeng��uacce��uacce.ko�� +��insmod��modprobe�� +- ��HPRE��SVA�� +``` +modprobe uacce +modprobe hisi_qm +modprobe hisi_hpre uacce_mode=1 +``` +- ��ZIP��SVA�� +``` +modprobe uacce +modprobe hisi_qm +modprobe hisi_zip uacce_mode=1 +``` +- ��SEC��SVA�� +``` +modprobe uacce +modprobe hisi_qm +modprobe hisi_sec2 uacce_mode=1 +``` + +- �� + +��```cat /sys/bus/pci/drivers/<driver>/module/parameters/``` �� + +�� +``` +insmod <driver> [uacce_mode] [pf_q_num] [vfs_num] [sgl_sge_nr] [ctx_q_num] +``` +[]�� ++ ��uacce_mode��0��uacce_mode=1�� ++ SEC��pf_q_num��256��HPRE/ZIP��pf_q_num��64�� ++ ��vfs_num��0�� ++ ��sgl_sge_nr��10�� ++ ��ctx_q_num��2�� +��ZIP�� +``` +insmod hisi_zip.ko uacce_mode=1 pf_q_num =16 vfs_num=1 sgl_sge_nr=16 +``` +��SVA��uacce_mode=1�� + +�� + + +### 3.7 UADK �� +UADK��yum��RPM�� + +#### 3.7.1 yum�� +��OpenEuler 22.03��yum�� +yum install libwd + +#### 3.7.2 RPM�� +��OpenEuler��UADK rpm��https://gitee.com/src-openeuler/libwd + +�� +``` +cd /usr/src/ + +git clone https://gitee.com/src-openeuler/libwd.git + +mkdir -p /usr/src/rpmbuild + +cd /usr/src/ rpmbuild + +mkdir SOURCES SPECS BUILD RPMS SRPMS + +cp /usr/src/libwd/libwd-xxx.tar.gz /usr/src/libwd/*patch /usr/src/rpmbuild/SOURCES/ + +cp /usr/src/libwd/warpdrive.spec /usr/src/rpmbuild/SPECS/ + +rpmbuild ��bb SPECS/warpdrive.spec +``` + +#### 3.7.3 �� +��Linaro��UADK��https://github.com/Linaro/uadk +�� +https://github.com/Linaro/uadk/blame/master/INSTALL + +### 3.8 UADK engine �� +UADK engine��yum��RPM�� +#### 3.8.1 yum�� +��OpenEuler 22.03��yum�� +``` +yum install uadk_engine +``` +#### 3.8.2 RPM�� +��OpenEuler��uadk_engine rpm��https://gitee.com/src-openeuler/uadk_engine + +�� +``` +cd /usr/src/ + +git clone https://gitee.com/src-openeuler/uadk_engine.git + +mkdir -p /usr/src/rpmbuild + +cd /usr/src/ rpmbuild + +mkdir SOURCES SPECS BUILD RPMS SRPMS + +cp /usr/src/uadk_engine/uadk_engine-xxx.tar.gz /usr/src/uadk_engine/*patch /usr/src/rpmbuild/SOURCES/ + +cp /usr/src/uadk_engine/ uadk_engine.spec /usr/src/rpmbuild/SPECS/ + +rpmbuild ��bb SPECS/uadk_engine.spec +``` +#### 3.8.3 �� +��Linaro��UADK engine��https://gitee.com/src-openeuler/uadk_engine + +�� +https://github.com/Linaro/uadk_engine/blob/master/README + +----------- + +## 4 �� +### 4.1 UADK +uadk/uadk_tool/��UADK��UADK��uadk_benchmark��```uadk_benchmark --help```��```uadk_benchmark --alglist```�� +#### 4.1.1 �� +��export��: +``` +export WD_RSA_CTX_NUM="sync:2@0,async:4@0" +export WD_DH_CTX_NUM="sync:2@0,async:4@0" +export WD_CIPHER_CTX_NUM="sync:2@2,async:4@2" +export WD_DIGEST_CTX_NUM="sync:2@2,async:4@2" +export WD_ECC_CTX_NUM="sync:2@0,async:4@0" +``` +�� + +#### 4.1.2 ��RSA�� +��rsa-1024��SVA�� +``` +uadk_benchmark --alg rsa-1024 --mode sva --optype 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` +��rsa-1024��SVA�� +``` +uadk_benchmark --alg rsa-1024 --mode sva --optype 1 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��uadk_benchmark --help�� +#### 4.1.3 ��DH�� +��dh-1024��SVA�� +``` +uadk_benchmark --alg dh-1024 --mode sva --optype 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��dh-1024��SVA�� +``` +uadk_benchmark --alg dh-1024 --mode sva --optype 1 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��uadk_benchmark --help�� + +#### 4.1.4 ��ECDH�� +��ecdh-1024��SVA�� +``` +uadk_benchmark --alg ecdh-1024 --mode sva --optype 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��ecdh-1024��SVA�� +``` +uadk_benchmark --alg ecdh-1024 --mode sva --optype 1 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��uadk_benchmark --help�� + +#### 4.1.5 ��ECXDH�� +��x25519��SVA�� +``` +uadk_benchmark --alg x25519 --mode sva --optype 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��x25519��SVA�� +``` +uadk_benchmark --alg x25519 --mode sva --optype 1 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��x448��SVA�� +``` +uadk_benchmark --alg x25519 --mode sva --optype 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��x448��SVA�� +``` +uadk_benchmark --alg x25519 --mode sva --optype 1 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��uadk_benchmark --help�� + +#### 4.1.6 ��ECDSA�� +��ecdsa-256��SVA�� +``` +uadk_benchmark --alg ecdsa-256 --mode sva --optype 4 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��ecdsa-256��SVA�� +``` +uadk_benchmark --alg ecdsa-256 --mode sva --optype 5 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��uadk_benchmark --help�� + +#### 4.1.7 ��SM2�� +��sm2��SVA�� +``` +uadk_benchmark --alg sm2 --mode sva --optype 4 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��sm2��SVA�� +``` +uadk_benchmark --alg sm2 --mode sva --optype 5 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��uadk_benchmark --help�� + +#### 4.1.8 ��MD5�� +��md5��SVA�� +``` +uadk_benchmark --alg md5 --mode sva --optype 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��md5��SVA�� +``` +uadk_benchmark --alg md5 --mode sva --optype 0 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��uadk_benchmark --help�� + +#### 4.1.9 ��SM3�� +��sm3��SVA�� +``` +uadk_benchmark --alg sm3 --mode sva --optype 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��sm3��SVA�� +``` +uadk_benchmark --alg sm3 --mode sva --optype 0 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��uadk_benchmark --help�� + +#### 4.1.10 ��SHA�� +��sha-512��SVA�� +``` +uadk_benchmark --alg sha-512 --mode sva --optype 0 --sync --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` +��sha-512��SVA�� +``` +uadk_benchmark --alg sha-512 --mode sva --optype 0 --async --seconds 5 --thread 2 --multi 1 --ctxnum 6 +``` + +��uadk_benchmark --help�� + +#### 4.1.11 ��AES�� +��aes-128-cbc��SVA�� +``` +uadk_benchmark --alg aes-128-cbc --mode sva --optype 0 --sync --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 +``` + +��aes-128-cbc��SVA�� +``` +uadk_benchmark --alg aes-128-cbc --mode sva --optype 1 --async --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 +``` +��uadk_benchmark --help�� + +#### 4.1.12 ��SM4�� +��sm4��SVA�� +``` +uadk_benchmark --alg sm4 --mode sva --optype 0 --sync --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 +``` + +��sm4��SVA�� +``` +uadk_benchmark --alg sm4 --mode sva --optype 1 --async --pktlen 1024 --seconds 5 --multi 1 --thread 2 --ctxnum 6 +``` +��uadk_benchmark --help�� + +### 4.2 ��UADK engine +��openssl��uadk engine��openssl�� +#### 4.2.1 �� +UADK engine�� +1. ��openssl.cnf��/usr/local/ssl/�� +``` +openssl_cnf = openssl_def +[openssl_def] +engines = engine_section +[engine_section] +uadk_engine = uadk_section +[uadk_section] +UADK_CMD_ENABLE_RSA_ENV = 1 +UADK_CMD_ENABLE_DH_ENV = 1 +UADK_CMD_ENABLE_CIPHER_ENV = 1 +UADK_CMD_ENABLE_DIGEST_ENV = 1 +UADK_CMD_ENABLE_ECC_ENV = 1 +``` + +2. ��export�� +``` +export WD_RSA_CTX_NUM="sync:2@0,async:4@0" +export WD_DH_CTX_NUM="sync:2@0,async:4@0" +export WD_CIPHER_CTX_NUM="sync:2@2,async:4@2" +export WD_DIGEST_CTX_NUM="sync:2@2,async:4@2" +export WD_ECC_CTX_NUM="sync:2@0,async:4@0" +``` + +�� + +#### 4.2.2 ��RSA�� +�� +``` +openssl genrsa -out prikey.pem -engine uadk_engine 1024 +``` +�� +``` +openssl rsa -in prikey.pem -pubout -out pubkey.pem -engine uadk_engine +``` +�� +``` +openssl rsautl -encrypt -in plain.txt -inkey pubkey.pem -pubin -out enc.txt -engine uadk_engine +``` +�� +``` +openssl rsautl -decrypt -in enc.txt -inkey prikey.pem -out dec.txt -engine uadk_engine +``` +�� +``` +openssl rsautl -sign -in msg.txt -inkey prikey.pem -out signed.txt -engine uadk_engine +``` +�� +``` +openssl rsautl -verify -in signed.txt -inkey pubkey.pem -pubin -out verified.txt -engine uadk_engine +``` +��openssl speed�� +``` +openssl speed -elapsed -engine uadk_engine rsa1024 +openssl speed -elapsed -engine uadk_engine -async_jobs 10 rsa1024 +openssl speed -elapsed -engine uadk_engine -async_jobs 36 rsa1024 +``` +#### 4.2.3 ��DH�� +�� +``` +openssl dhparam -out dhparam.pem 768 +``` +��Alice��: +``` +openssl genpkey -paramfile dhparam.pem -out alice_prikey.pem -engine uadk_engine +``` +��Alice�� +``` +openssl pkey -in alice_prikey.pem -pubout -out alice_pubkey.pem +``` +��Bob�� +``` +openssl genpkey -paramfile dhparam.pem -out bob_prikey.pem -engine uadk_engine +``` +��Bob�� +``` +openssl pkey -in bob_prikey.pem -pubout -out bob_pubkey.pem +``` +�� +``` +openssl pkeyutl -derive -inkey alice_prikey.pem -peerkey bob_pubkey.pem -out secret1.bin -engine uadk_engine +openssl pkeyutl -derive -inkey bob_prikey.pem -peerkey alice_pubkey.pem -out secret2.bin -engine uadk_engine +``` +�� +``` +cmp secret1.bin secret2.bin +xxd secret1.bin +xxd secret2.bin +``` +#### 4.2.4 ��ECDH�� +��Alice�� +``` +openssl ecparam -name secp128r1 -genkey -noout -out alice_prikey_secp128r1.pem -engine uadk_engine +``` +�� +``` +openssl pkey -in alice_prikey_secp128r1.pem -text +``` +��Alice�� +``` +openssl pkey -pubout -in alice_prikey_secp128r1.pem -out alice_secp128r1.pub +``` +��Bob�� +``` +openssl ecparam -name secp128r1 -genkey -noout -out bob_prikey_secp128r1.pem -engine uadk_engine +``` +��Bob�� +``` +openssl pkey -pubout -in bob_prikey_secp128r1.pem -out bob_secp128r1.pub +``` +Alice�� +``` +openssl pkeyutl -derive -out alicebob_secp128r1.key -inkey alice_prikey_secp128r1.pem -peerkey bob_secp128r1.pub -engine uadk_engine +``` +Bob�� +``` +openssl pkeyutl -derive -out bobalice_secp128r1.key -inkey bob_prikey_secp128r1.pem -peerkey alice_secp128r1.pub -engine uadk_engine +``` +��Alice��Bob�� +``` +cmp alicebob_secp128r1.key bobalice_secp128r1.key +xxd alicebob_secp128r1.key +xxd bobalice_secp128r1.key +``` +#### 4.2.5 ��ECXDH�� +��Alice�� +``` +openssl genpkey -algorithm X25519 -out alice_x25519_prikey.pem -engine uadk_engine +``` +�� +``` +openssl pkey -in alice_x25519prikey.pem -text +``` +��Alice�� +``` +openssl pkey -pubout -in alice_x25519_prikey.pem -out alice_ x25519.pub +``` +��Bob�� +``` +openssl genpkey -algorithm X25519 -out bob_x25519_prikey.pem -engine uadk_engine +``` +��Bob�� +``` +openssl pkey -pubout -in bob_x25519_prikey.pem -out bob_x25519.pub +``` +Alice�� +``` +openssl pkeyutl -derive -out alicebob_x25519.key -inkey alice_x25519_prikey.pem -peerkey bob_x25519.pub -engine uadk_engine +``` +Bob�� +``` +openssl pkeyutl -derive -out bobalice_x25519.key -inkey bob_x25519_prikey.pem -peerkey alice_ x25519.pub -engine uadk_engine +``` +��Alice��Bob�� +``` +cmp alicebob_x25519.key bobalice_x25519.key +xxd alicebob_x25519.key +xxd bobalice_x25519.key +``` +��X448��genpkey��algorithm��X448��-algorithm X448 +#### 4.2.6 ��ECDSA�� +�� +``` +openssl ecparam -genkey -name secp384r1 -noout -out private.pem -engine uadk_engine +``` +�� +``` +openssl ec -in private.pem -pubout -out public.pem +``` +��msg.txt�� +��SHA256�� +``` +openssl dgst -sha256 -sign private.pem -out ecdsa_384r1.sig -engine uadk_engine msg.txt +``` +��SHA256�� +``` +openssl dgst -sha256 -verify public.pem -signature ecdsa_384r1.sig -engine uadk_engine msg.txt +``` +openssl speed�� +``` +openssl speed -elapsed -engine uadk_engine ecdsap256 +openssl speed -elapsed -engine uadk_engine -async_jobs 1 ecdsap256 +``` +#### 4.2.7 ��SM2�� +�� +``` +openssl ecparam -name SM2 -genkey -out sm2_prikey.pem -engine uadk_engine +``` +�� +``` +openssl ec -in sm2_prikey.pem -pubout -out sm2_pubkey.pem +``` +��msg.txt�� +��SHA256�� +``` +openssl dgst -sha256 -sign sm2_prikey.pem -out sm2.sig -engine uadk_engine msg.txt +``` +��SHA256�� +``` +openssl dgst -sha256 -verify sm2_pubkey.pem -signature sm2.sig -engine uadk_engine msg.txt +``` +#### 4.2.8 ��MD5�� +��data.txt�� +``` +openssl md5 -engine uadk_engine data.txt +``` +openssl speed�� +``` +openssl speed -engine uadk_engine -async_jobs 1 -evp md5 +``` +#### 4.2.9 ��SM3�� +��data.txt�� +``` +openssl sm3 -engine uadk_engine data.txt +``` +#### 4.2.10 ��SHA�� +��data.txt�� +``` +openssl sha1 -engine uadk_engine data.txt +openssl sha256 -engine uadk_engine data.txt +openssl sha512 -engine uadk_engine data.txt +``` +#### 4.2.11 ��AES�� +aes-128-cbc�� +``` +openssl enc -aes-128-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-128-cbc�� +``` +openssl enc -aes-128-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-192-cbc�� +``` +openssl enc -aes-192-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-192-cbc�� +``` +openssl enc -aes-192-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-256-cbc�� +``` +openssl enc -aes-256-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-256-cbc�� +``` +openssl enc -aes-256-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-128-ecb�� +``` +openssl enc -aes-128-ecb -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-128-ecb�� +``` +openssl enc -aes-128-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-192-ecb�� +``` +openssl enc -aes-192-ecb -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-192-ecb�� +``` +openssl enc -aes-192-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-256-ecb�� +``` +openssl enc -aes-256-ecb -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-256-ecb�� +``` +openssl enc -aes-256-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-128-ctr�� +``` +openssl enc -aes-128-ctr -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-128-ctr�� +``` +openssl enc -aes-128-ctr -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-192-ctr�� +``` +openssl enc -aes-192-ctr -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-192-ctr�� +``` +openssl enc -aes-192-ctr -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-256-ctr�� +``` +openssl enc -aes-256-ctr -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +aes-256-ctr�� +``` +openssl enc -aes-256-ctr -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +#### 4.2.12 ��SM4�� +sm4-cbc�� +``` +openssl enc -sm4-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +sm4-cbc�� +``` +openssl enc -sm4-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +sm4-ecb�� +``` +openssl enc -sm4-ecb -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +sm4-ecb�� +``` +openssl enc -sm4-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +#### 4.2.13 ��DES�� +des-ede3-cbc�� +``` +openssl enc -des-ede3-cbc -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +des-ede3-cbc�� +``` +openssl enc -des-ede3-cbc -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +des-ede3-ecb�� +``` +openssl enc -des-ede3-ecb -a -in data -out data.en -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` +des-ede3-ecb�� +``` +openssl enc -des-ede3-ecb -a -d -in data.en -out data.de -pass pass:123456 -K abc -iv abc -engine uadk_engine -p +``` -- 2.33.0

2 1

[PATCH] utils: add glibc version checking for uadk_memcpy
by Kai Ye 25 Mar '22

25 Mar '22

No assembly language is required as glibc version >= 2.32. This is because the later glibc version has updated this optimization. Signed-off-by: Kai Ye <yekai13(a)huawei.com> --- src/uadk_utils.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/src/uadk_utils.c b/src/uadk_utils.c index 2b34b3a..ec12e67 100644 --- a/src/uadk_utils.c +++ b/src/uadk_utils.c @@ -14,9 +14,12 @@ * limitations under the License. * */ +#include <gnu/libc-version.h> #include "uadk_utils.h" -#define UADK_MEM_IMPROVE_THRESHOLD 1024 +#define GLIBC_MAIN 2U +#define GLIBC_MINOR 32U +#define UADK_MEM_IMPROVE_THRESHOLD 1024U static void *memcpy_large(void *dstpp, const void *srcpp, size_t len) { @@ -56,7 +59,9 @@ static void *memcpy_large(void *dstpp, const void *srcpp, size_t len) void *uadk_memcpy(void *dstpp, const void *srcpp, size_t len) { - if (len >= UADK_MEM_IMPROVE_THRESHOLD) + /* No assembly language is required as glibc version >= 2.32 */ + if (((__GLIBC__ == GLIBC_MAIN && __GLIBC_MINOR__ < GLIBC_MINOR) || + __GLIBC__ < GLIBC_MAIN) && len >= UADK_MEM_IMPROVE_THRESHOLD) return memcpy_large(dstpp, srcpp, len); else return memcpy(dstpp, srcpp, len); -- 2.33.0

1 0

openEuler Acclib SIG组例会会议通知
by fanghao (A) 23 Mar '22

23 Mar '22

Hello everyone, openEuler Acclib SIG组的交流例会举行时间：北京时间，每周三上午，11点~12点会议链接：https://linaro-org.zoom.us/j/91879279131 欢迎感兴趣接入参与。可通过邮件申报议题。邮件列表：acc(a)openeuler.xn--org,openeuler-sd3u001d022a450ktlybqi2b. Thanks. Hao Fang

1 0

[PATCH] sec: unify the print format
by Kai Ye 22 Mar '22

22 Mar '22

Use the following rules to unify the print format: 1. failed to do sth. 2. invalid: sth is NULL. Signed-off-by: Kai Ye <yekai13(a)huawei.com> --- drv/hisi_sec.c | 20 ++++++++++---------- wd_aead.c | 12 ++++++------ wd_cipher.c | 20 ++++++++++---------- wd_digest.c | 10 +++++----- 4 files changed, 31 insertions(+), 31 deletions(-) diff --git a/drv/hisi_sec.c b/drv/hisi_sec.c index 16fcb5f..aa86a6b 100644 --- a/drv/hisi_sec.c +++ b/drv/hisi_sec.c @@ -703,7 +703,7 @@ static void parse_cipher_bd2(struct hisi_sec_sqe *sqe, done = sqe->type2.done_flag & SEC_DONE_MASK; if (done != SEC_HW_TASK_DONE || sqe->type2.error_type) { - WD_ERR("SEC BD %s fail! done=0x%x, etype=0x%x\n", "cipher", + WD_ERR("failed to parse cipher BD2! done=0x%x, etype=0x%x\n", done, sqe->type2.error_type); recv_msg->result = WD_IN_EPARA; } else { @@ -927,7 +927,7 @@ int hisi_sec_cipher_send(handle_t ctx, struct wd_cipher_msg *msg) int ret; if (!msg) { - WD_ERR("input cipher msg is NULL!\n"); + WD_ERR("invalid: input cipher msg is NULL!\n"); return -WD_EINVAL; } @@ -1130,7 +1130,7 @@ int hisi_sec_cipher_send_v3(handle_t ctx, struct wd_cipher_msg *msg) int ret; if (!msg) { - WD_ERR("input cipher msg is NULL!\n"); + WD_ERR("invalid: input cipher msg is NULL!\n"); return -WD_EINVAL; } @@ -1175,7 +1175,7 @@ static void parse_cipher_bd3(struct hisi_sec_sqe3 *sqe, done = sqe->done_flag & SEC_DONE_MASK; if (done != SEC_HW_TASK_DONE || sqe->error_type) { - WD_ERR("SEC BD3 %s fail! done=0x%x, etype=0x%x\n", "cipher", + WD_ERR("failed to parse cipher BD3! done=0x%x, etype=0x%x\n", done, sqe->error_type); recv_msg->result = WD_IN_EPARA; } else { @@ -1278,7 +1278,7 @@ static void parse_digest_bd2(struct hisi_sec_sqe *sqe, done = sqe->type2.done_flag & SEC_DONE_MASK; if (done != SEC_HW_TASK_DONE || sqe->type2.error_type) { - WD_ERR("SEC BD %s fail! done=0x%x, etype=0x%x\n", "digest", + WD_ERR("failed to parse digest BD2! done=0x%x, etype=0x%x\n", done, sqe->type2.error_type); recv_msg->result = WD_IN_EPARA; } else { @@ -1354,7 +1354,7 @@ int hisi_sec_digest_send(handle_t ctx, struct wd_digest_msg *msg) int ret; if (!msg) { - WD_ERR("input digest msg is NULL!\n"); + WD_ERR("invalid: input digest msg is NULL!\n"); return -WD_EINVAL; } @@ -1510,7 +1510,7 @@ int hisi_sec_digest_send_v3(handle_t ctx, struct wd_digest_msg *msg) int ret; if (!msg) { - WD_ERR("input digest msg is NULL!\n"); + WD_ERR("invalid: input digest msg is NULL!\n"); return -WD_EINVAL; } @@ -1578,7 +1578,7 @@ static void parse_digest_bd3(struct hisi_sec_sqe3 *sqe, done = sqe->done_flag & SEC_DONE_MASK; if (done != SEC_HW_TASK_DONE || sqe->error_type) { - WD_ERR("SEC BD3 %s fail! done=0x%x, etype=0x%x\n", "digest", + WD_ERR("failed to parse digest BD3! done=0x%x, etype=0x%x\n", done, sqe->error_type); recv_msg->result = WD_IN_EPARA; } else { @@ -1927,7 +1927,7 @@ static void parse_aead_bd2(struct hisi_sec_sqe *sqe, icv = (sqe->type2.done_flag & SEC_ICV_MASK) >> 1; if (done != SEC_HW_TASK_DONE || sqe->type2.error_type || icv == SEC_HW_ICV_ERR) { - WD_ERR("SEC BD aead fail! done=0x%x, etype=0x%x, icv=0x%x\n", + WD_ERR("failed to parse aead BD2! done=0x%x, etype=0x%x, icv=0x%x\n", done, sqe->type2.error_type, icv); recv_msg->result = WD_IN_EPARA; } else { @@ -2195,7 +2195,7 @@ static void parse_aead_bd3(struct hisi_sec_sqe3 *sqe, icv = (sqe->done_flag & SEC_ICV_MASK) >> 1; if (done != SEC_HW_TASK_DONE || sqe->error_type || icv == SEC_HW_ICV_ERR) { - WD_ERR("SEC BD3 aead fail! done=0x%x, etype=0x%x, icv=0x%x\n", + WD_ERR("failed to parse aead BD3! done=0x%x, etype=0x%x, icv=0x%x\n", done, sqe->error_type, icv); recv_msg->result = WD_IN_EPARA; } else { diff --git a/wd_aead.c b/wd_aead.c index a78f152..7a33d4e 100644 --- a/wd_aead.c +++ b/wd_aead.c @@ -63,14 +63,14 @@ static void wd_aead_set_static_drv(void) { wd_aead_setting.driver = wd_aead_get_driver(); if (!wd_aead_setting.driver) - WD_ERR("fail to get driver\n"); + WD_ERR("failed to get driver!\n"); } #else static void __attribute__((constructor)) wd_aead_open_driver(void) { wd_aead_setting.dlhandle = dlopen("libhisi_sec.so", RTLD_NOW); if (!wd_aead_setting.dlhandle) - WD_ERR("failed to open libhisi_sec.so\n"); + WD_ERR("failed to open libhisi_sec.so!\n"); } static void __attribute__((destructor)) wd_aead_close_driver(void) @@ -344,7 +344,7 @@ static int aead_param_check(struct wd_aead_sess *sess, int ret; if (unlikely(!sess || !req)) { - WD_ERR("aead input sess or req is NULL.\n"); + WD_ERR("invalid: aead input sess or req is NULL!\n"); return -WD_EINVAL; } @@ -393,7 +393,7 @@ static int aead_param_check(struct wd_aead_sess *sess, static int aead_init_check(struct wd_ctx_config *config, struct wd_sched *sched) { if (!config || !config->ctxs || !config->ctxs[0].ctx || !sched) { - WD_ERR("wd aead config or sched is NULL!\n"); + WD_ERR("invalid: wd aead config or sched is NULL!\n"); return -WD_EINVAL; } @@ -593,7 +593,7 @@ int wd_do_aead_async(handle_t h_sess, struct wd_aead_req *req) return -WD_EINVAL; if (unlikely(!req->cb)) { - WD_ERR("aead input req cb is NULL.\n"); + WD_ERR("invalid: aead input req cb is NULL!\n"); return -WD_EINVAL; } @@ -646,7 +646,7 @@ int wd_aead_poll_ctx(__u32 idx, __u32 expt, __u32 *count) int ret; if (!count) { - WD_ERR("aead poll ctx input param is NULL!\n"); + WD_ERR("invalid: aead poll ctx input param is NULL!\n"); return -WD_EINVAL; } diff --git a/wd_cipher.c b/wd_cipher.c index 8daac0f..374b05e 100644 --- a/wd_cipher.c +++ b/wd_cipher.c @@ -75,14 +75,14 @@ static void wd_cipher_set_static_drv(void) { wd_cipher_setting.driver = wd_cipher_get_driver(); if (!wd_cipher_setting.driver) - WD_ERR("fail to get driver\n"); + WD_ERR("failed to get driver!\n"); } #else static void __attribute__((constructor)) wd_cipher_open_driver(void) { wd_cipher_setting.dlhandle = dlopen("libhisi_sec.so", RTLD_NOW); if (!wd_cipher_setting.dlhandle) - WD_ERR("fail to open libhisi_sec.so\n"); + WD_ERR("failed to open libhisi_sec.so!\n"); } static void __attribute__((destructor)) wd_cipher_close_driver(void) @@ -158,7 +158,7 @@ static int cipher_init_check(struct wd_ctx_config *config, struct wd_sched *sched) { if (!config || !config->ctxs || !config->ctxs[0].ctx || !sched) { - WD_ERR("wd cipher config or sched is NULL!\n"); + WD_ERR("invalid: wd cipher config or sched is NULL!\n"); return -WD_EINVAL; } @@ -177,7 +177,7 @@ int wd_cipher_set_key(handle_t h_sess, const __u8 *key, __u32 key_len) int ret; if (!key || !sess) { - WD_ERR("cipher set key input param err!\n"); + WD_ERR("invalid: cipher set key input param err!\n"); return -WD_EINVAL; } @@ -205,13 +205,13 @@ handle_t wd_cipher_alloc_sess(struct wd_cipher_sess_setup *setup) struct wd_cipher_sess *sess = NULL; if (unlikely(!setup)) { - WD_ERR("cipher input setup is NULL!\n"); + WD_ERR("invalid: cipher input setup is NULL!\n"); return (handle_t)0; } sess = malloc(sizeof(struct wd_cipher_sess)); if (!sess) { - WD_ERR("fail to alloc session memory!\n"); + WD_ERR("failed to alloc session memory!\n"); return (handle_t)0; } memset(sess, 0, sizeof(struct wd_cipher_sess)); @@ -235,7 +235,7 @@ void wd_cipher_free_sess(handle_t h_sess) struct wd_cipher_sess *sess = (struct wd_cipher_sess *)h_sess; if (unlikely(!sess)) { - WD_ERR("cipher input h_sess is NULL!\n"); + WD_ERR("invalid: cipher input h_sess is NULL!\n"); return; } @@ -386,12 +386,12 @@ static int wd_cipher_check_params(handle_t h_sess, int ret = 0; if (unlikely(!h_sess || !req)) { - WD_ERR("cipher input sess or req is NULL!\n"); + WD_ERR("invalid: cipher input sess or req is NULL!\n"); return -WD_EINVAL; } if (unlikely(mode == CTX_MODE_ASYNC && !req->cb)) { - WD_ERR("cipher req cb is NULL!\n"); + WD_ERR("invalid: cipher req cb is NULL!\n"); return -WD_EINVAL; } @@ -560,7 +560,7 @@ int wd_cipher_poll_ctx(__u32 idx, __u32 expt, __u32 *count) int ret; if (unlikely(!count)) { - WD_ERR("wd cipher poll ctx input param is NULL!\n"); + WD_ERR("invalid: cipher poll ctx input param is NULL!\n"); return -WD_EINVAL; } diff --git a/wd_digest.c b/wd_digest.c index f4d0075..c5030d0 100644 --- a/wd_digest.c +++ b/wd_digest.c @@ -62,7 +62,7 @@ static void wd_digest_set_static_drv(void) { wd_digest_setting.driver = wd_digest_get_driver(); if (!wd_digest_setting.driver) - WD_ERR("fail to get driver\n"); + WD_ERR("failed to get driver!\n"); } #else static void __attribute__((constructor)) wd_digest_open_driver(void) @@ -70,7 +70,7 @@ static void __attribute__((constructor)) wd_digest_open_driver(void) /* Fix me: vendor driver should be put in /usr/lib/wd/ */ wd_digest_setting.dlhandle = dlopen("libhisi_sec.so", RTLD_NOW); if (!wd_digest_setting.dlhandle) - WD_ERR("fail to open libhisi_sec.so\n"); + WD_ERR("failed to open libhisi_sec.so!\n"); } static void __attribute__((destructor)) wd_digest_close_driver(void) @@ -251,7 +251,7 @@ static int digest_param_check(struct wd_digest_sess *sess, int ret; if (unlikely(!sess || !req)) { - WD_ERR("digest input sess or req is NULL.\n"); + WD_ERR("invalid: digest input sess or req is NULL!\n"); return -WD_EINVAL; } @@ -397,7 +397,7 @@ int wd_do_digest_async(handle_t h_sess, struct wd_digest_req *req) return -WD_EINVAL; if (unlikely(!req->cb)) { - WD_ERR("digest input req cb is NULL.\n"); + WD_ERR("invalid: digest input req cb is NULL!\n"); return -WD_EINVAL; } @@ -450,7 +450,7 @@ int wd_digest_poll_ctx(__u32 idx, __u32 expt, __u32 *count) int ret; if (unlikely(!count)) { - WD_ERR("digest count is NULL.\n"); + WD_ERR("invalid: digest poll ctx input param is NULL!\n"); return -WD_EINVAL; } -- 2.33.0

1 0

Fw:[PATCH RFC 00/12] IOMMUFD Generic interface
by Zhangfei Gao 19 Mar '22

19 Mar '22

------------------ Original ------------------ From: "Jason Gunthorpe" <iommu(a)lists.linux-foundation.org>; Date: Sat, Mar 19, 2022 01:27 AM To:  Cc: "Jean-Philippe Brucker"<jean-philippe(a)linaro.org>;"Chaitanya Kulkarni"<chaitanyak(a)nvidia.com>;"kvm"<kvm(a)vger.kernel.org>;"Michael S. Tsirkin"<mst(a)redhat.com>;"Jason Wang"<jasowang(a)redhat.com>;"Cornelia Huck"<cohuck(a)redhat.com>;"Niklas Schnelle"<schnelle(a)linux.ibm.com>;"iommu"<iommu(a)lists.linux-foundation.org>;"Daniel Jordan"<daniel.m.jordan(a)oracle.com>;"Kevin Tian"<kevin.tian(a)intel.com>;"Alex Williamson"<alex.williamson(a)redhat.com>;"Joao Martins"<joao.m.martins(a)oracle.com>;"David Gibson"<david(a)gibson.dropbear.id.au>; Subject: [PATCH RFC 00/12] IOMMUFD Generic interface iommufd is the user API to control the IOMMU subsystem as it relates to managing IO page tables that point at user space memory. It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO container) which is the VFIO specific interface for a similar idea. We see a broad need for extended features, some being highly IOMMU device specific:  - Binding iommu_domain's to PASID/SSID  - Userspace page tables, for ARM, x86 and S390  - Kernel bypass'd invalidation of user page tables  - Re-use of the KVM page table in the IOMMU  - Dirty page tracking in the IOMMU  - Runtime Increase/Decrease of IOPTE size  - PRI support with faults resolved in userspace As well as a need to access these features beyond just VFIO, VDPA for instance, but other classes of accelerator HW are touching on these areas now too. The v1 series proposed re-using the VFIO type 1 data structure, however it was suggested that if we are doing this big update then we should also come with a data structure that solves the limitations that VFIO type1 has. Notably this addresses:  - Multiple IOAS/'containers' and multiple domains inside a single FD  - Single-pin operation no matter how many domains and containers use    a page  - A fine grained locking scheme supporting user managed concurrency for    multi-threaded map/unmap  - A pre-registration mechanism to optimize vIOMMU use cases by    pre-pinning pages  - Extended ioctl API that can manage these new objects and exposes    domains directly to user space  - domains are sharable between subsystems, eg VFIO and VDPA The bulk of this code is a new data structure design to track how the IOVAs are mapped to PFNs. iommufd intends to be general and consumable by any driver that wants to DMA to userspace. From a driver perspective it can largely be dropped in in-place of iommu_attach_device() and provides a uniform full feature set to all consumers. As this is a larger project this series is the first step. This series provides the iommfd "generic interface" which is designed to be suitable for applications like DPDK and VMM flows that are not optimized to specific HW scenarios. It is close to being a drop in replacement for the existing VFIO type 1. This is part two of three for an initial sequence:  - Move IOMMU Group security into the iommu layer    https://lore.kernel.org/linux-iommu/20220218005521.172832-1-baolu.lu@linux.…  * Generic IOMMUFD implementation  - VFIO ability to consume IOMMUFD    An early exploration of this is available here:     https://github.com/luxis1999/iommufd/commits/iommufd-v5.17-rc6 Various parts of the above extended features are in WIP stages currently to define how their IOCTL interface should work. At this point, using the draft VFIO series, unmodified qemu has been tested to operate using iommufd on x86 and ARM systems. Several people have contributed directly to this work: Eric Auger, Kevin Tian, Lu Baolu, Nicolin Chen, Yi L Liu. Many more have participated in the discussions that lead here, and provided ideas. Thanks to all! This is on github: https://github.com/jgunthorpe/linux/commits/iommufd # S390 in-kernel page table walker Cc: Niklas Schnelle <schnelle(a)linux.ibm.com> Cc: Matthew Rosato <mjrosato(a)linux.ibm.com> # AMD Dirty page tracking Cc: Joao Martins <joao.m.martins(a)oracle.com> # ARM SMMU Dirty page tracking Cc: Keqian Zhu <zhukeqian1(a)huawei.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi(a)huawei.com> # ARM SMMU nesting Cc: Eric Auger <eric.auger(a)redhat.com> Cc: Jean-Philippe Brucker <jean-philippe(a)linaro.org> # Map/unmap performance Cc: Daniel Jordan <daniel.m.jordan(a)oracle.com> # VDPA Cc: "Michael S. Tsirkin" <mst(a)redhat.com> Cc: Jason Wang <jasowang(a)redhat.com> # Power Cc: David Gibson <david(a)gibson.dropbear.id.au> # vfio Cc: Alex Williamson <alex.williamson(a)redhat.com> Cc: Cornelia Huck <cohuck(a)redhat.com> Cc: kvm(a)vger.kernel.org # iommu Cc: iommu(a)lists.linux-foundation.org # Collaborators Cc: "Chaitanya Kulkarni" <chaitanyak(a)nvidia.com> Cc: Nicolin Chen <nicolinc(a)nvidia.com> Cc: Lu Baolu <baolu.lu(a)linux.intel.com> Cc: Kevin Tian <kevin.tian(a)intel.com> Cc: Yi Liu <yi.l.liu(a)intel.com> Signed-off-by: Jason Gunthorpe <jgg(a)nvidia.com> Jason Gunthorpe (11):   interval-tree: Add a utility to iterate over spans in an interval tree   iommufd: File descriptor, context, kconfig and makefiles   kernel/user: Allow user::locked_vm to be usable for iommufd   iommufd: PFN handling for iopt_pages   iommufd: Algorithms for PFN storage   iommufd: Data structure to provide IOVA to PFN mapping   iommufd: IOCTLs for the io_pagetable   iommufd: Add a HW pagetable object   iommufd: Add kAPI toward external drivers   iommufd: vfio container FD ioctl compatibility   iommufd: Add a selftest Kevin Tian (1):   iommufd: Overview documentation  Documentation/userspace-api/index.rst         |    1 +  .../userspace-api/ioctl/ioctl-number.rst      |    1 +  Documentation/userspace-api/iommufd.rst       |  224 +++  MAINTAINERS                                   |   10 +  drivers/iommu/Kconfig                         |    1 +  drivers/iommu/Makefile                        |    2 +-  drivers/iommu/iommufd/Kconfig                 |   22 +  drivers/iommu/iommufd/Makefile                |   13 +  drivers/iommu/iommufd/device.c                |  274 ++++  drivers/iommu/iommufd/hw_pagetable.c          |  142 ++  drivers/iommu/iommufd/io_pagetable.c          |  890 +++++++++++  drivers/iommu/iommufd/io_pagetable.h          |  170 +++  drivers/iommu/iommufd/ioas.c                  |  252 ++++  drivers/iommu/iommufd/iommufd_private.h       |  231 +++  drivers/iommu/iommufd/iommufd_test.h          |   65 +  drivers/iommu/iommufd/main.c                  |  346 +++++  drivers/iommu/iommufd/pages.c                 | 1321 +++++++++++++++++  drivers/iommu/iommufd/selftest.c              |  495 ++++++  drivers/iommu/iommufd/vfio_compat.c           |  401 +++++  include/linux/interval_tree.h                 |   41 +  include/linux/iommufd.h                       |   50 +  include/linux/sched/user.h                    |    2 +-  include/uapi/linux/iommufd.h                  |  223 +++  kernel/user.c                                 |    1 +  lib/interval_tree.c                           |   98 ++  tools/testing/selftests/Makefile              |    1 +  tools/testing/selftests/iommu/.gitignore      |    2 +  tools/testing/selftests/iommu/Makefile        |   11 +  tools/testing/selftests/iommu/config          |    2 +  tools/testing/selftests/iommu/iommufd.c       | 1225 +++++++++++++++  30 files changed, 6515 insertions(+), 2 deletions(-)  create mode 100644 Documentation/userspace-api/iommufd.rst  create mode 100644 drivers/iommu/iommufd/Kconfig  create mode 100644 drivers/iommu/iommufd/Makefile  create mode 100644 drivers/iommu/iommufd/device.c  create mode 100644 drivers/iommu/iommufd/hw_pagetable.c  create mode 100644 drivers/iommu/iommufd/io_pagetable.c  create mode 100644 drivers/iommu/iommufd/io_pagetable.h  create mode 100644 drivers/iommu/iommufd/ioas.c  create mode 100644 drivers/iommu/iommufd/iommufd_private.h  create mode 100644 drivers/iommu/iommufd/iommufd_test.h  create mode 100644 drivers/iommu/iommufd/main.c  create mode 100644 drivers/iommu/iommufd/pages.c  create mode 100644 drivers/iommu/iommufd/selftest.c  create mode 100644 drivers/iommu/iommufd/vfio_compat.c  create mode 100644 include/linux/iommufd.h  create mode 100644 include/uapi/linux/iommufd.h  create mode 100644 tools/testing/selftests/iommu/.gitignore  create mode 100644 tools/testing/selftests/iommu/Makefile  create mode 100644 tools/testing/selftests/iommu/config  create mode 100644 tools/testing/selftests/iommu/iommufd.c base-commit: d1c716ed82a6bf4c35ba7be3741b9362e84cd722 -- 2.35.1 _______________________________________________ iommu mailing list iommu(a)lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu

1 0

[PATCH] rsa: bugfix about redundant and inefficient operations
by Zhiqi Song 16 Mar '22

16 Mar '22

Includes: 1. Remove redundant judgment conditions. 2. Remove redundant function parameters. 3. Remove the redundant operation in soft RSA keygen method. 4. Use more efficient BN memory allocation method, and add judgment of the results. Signed-off-by: Zhiqi Song <songzhiqi1(a)huawei.com> --- src/uadk_rsa.c | 331 ++++++++++++++++++++++--------------------------- 1 file changed, 148 insertions(+), 183 deletions(-) diff --git a/src/uadk_rsa.c b/src/uadk_rsa.c index 1488b98..821cb78 100644 --- a/src/uadk_rsa.c +++ b/src/uadk_rsa.c @@ -143,7 +143,7 @@ enum { static int rsa_check_bit_useful(const int bits, int flen) { - if (!flen && flen > bits) + if (flen > bits) return SOFT; if (bits < RSA_MIN_MODULUS_BITS) @@ -411,8 +411,8 @@ static int get_rsa_prime_param(struct rsa_prime_param *param, BN_CTX *ctx) return UADK_E_SUCCESS; end: - fprintf(stderr, "failed to malloc params\n"); - return UADK_E_FAIL; + fprintf(stderr, "failed to allocate rsa prime params\n"); + return -ENOMEM; } static int rsa_primes_gen(int bits, BIGNUM *e_pub, BIGNUM *p, @@ -433,13 +433,11 @@ static int rsa_primes_gen(int bits, BIGNUM *e_pub, BIGNUM *p, BN_CTX_start(ctx); param = OPENSSL_zalloc(sizeof(struct rsa_prime_param)); - if (!param) { - fprintf(stderr, "failed to malloc rsa prime param\n"); + if (!param) goto free_ctx; - } ret = get_rsa_prime_param(param, ctx); - if (!ret) + if (ret != UADK_E_SUCCESS) goto free_param; /* Divide bits into 'primes' pieces evenly */ @@ -624,9 +622,10 @@ static int rsa_get_sign_res(int padding, BIGNUM *to_bn, const BIGNUM *n, return UADK_E_SUCCESS; } -static int rsa_get_verify_res(int padding, BIGNUM *to_bn, const BIGNUM *n, - BIGNUM *ret_bn) +static int rsa_get_verify_res(int padding, const BIGNUM *n, BIGNUM *ret_bn) { + BIGNUM *to_bn = NULL; + if ((padding == RSA_X931_PADDING) && ((bn_get_words(ret_bn)[0] & 0xf) != 0x0c)) { if (!BN_sub(to_bn, n, ret_bn)) @@ -840,6 +839,7 @@ static struct uadk_rsa_sess *rsa_new_eng_session(RSA *rsa) rsa_sess = OPENSSL_malloc(sizeof(struct uadk_rsa_sess)); if (!rsa_sess) return NULL; + memset(rsa_sess, 0, sizeof(struct uadk_rsa_sess)); rsa_sess->alg = rsa; rsa_sess->is_prikey_ready = UN_SET; @@ -971,23 +971,44 @@ static int rsa_get_keygen_param(struct wd_rsa_req *req, struct rsa_keygen_param_bn *bn_param) { struct wd_rsa_kg_out *out = (struct wd_rsa_kg_out *)req->dst; + struct wd_dtb wd_d, wd_n, wd_qinv, wd_dq, wd_dp; + BIGNUM *dmp1, *dmq1, *iqmp, *n, *d; unsigned int key_bits, key_size; - BIGNUM *dmp1 = BN_new(); - BIGNUM *dmq1 = BN_new(); - BIGNUM *iqmp = BN_new(); - BIGNUM *n = BN_new(); - BIGNUM *d = BN_new(); - struct wd_dtb wd_d; - struct wd_dtb wd_n; - struct wd_dtb wd_qinv; - struct wd_dtb wd_dq; - struct wd_dtb wd_dp; + BN_CTX *bn_ctx; key_bits = wd_rsa_get_key_bits(ctx); + if (!key_bits) + return UADK_E_FAIL; + key_size = key_bits >> BIT_BYTES_SHIFT; wd_rsa_get_kg_out_params(out, &wd_d, &wd_n); wd_rsa_get_kg_out_crt_params(out, &wd_qinv, &wd_dq, &wd_dp); + bn_ctx = BN_CTX_new(); + if (!bn_ctx) + return UADK_E_FAIL; + + BN_CTX_start(bn_ctx); + dmp1 = BN_CTX_get(bn_ctx); + if (!dmp1) + goto free_bn_ctx; + + dmq1 = BN_CTX_get(bn_ctx); + if (!dmq1) + goto free_bn_ctx; + + iqmp = BN_CTX_get(bn_ctx); + if (!iqmp) + goto free_bn_ctx; + + n = BN_CTX_get(bn_ctx); + if (!n) + goto free_bn_ctx; + + d = BN_CTX_get(bn_ctx); + if (!d) + goto free_bn_ctx; + BN_bin2bn((unsigned char *)wd_d.data, key_size, d); BN_bin2bn((unsigned char *)wd_n.data, key_size, n); BN_bin2bn((unsigned char *)wd_qinv.data, wd_qinv.dsize, iqmp); @@ -997,16 +1018,13 @@ static int rsa_get_keygen_param(struct wd_rsa_req *req, if (!(RSA_set0_key(rsa, n, bn_param->e, d) && RSA_set0_factors(rsa, bn_param->p, bn_param->q) && RSA_set0_crt_params(rsa, dmp1, dmq1, iqmp))) - goto bn_free; + goto free_bn_ctx; return UADK_E_SUCCESS; -bn_free: - BN_clear_free(dmp1); - BN_clear_free(dmq1); - BN_clear_free(iqmp); - BN_clear_free(n); - BN_clear_free(d); +free_bn_ctx: + BN_CTX_end(bn_ctx); + BN_CTX_free(bn_ctx); return UADK_E_FAIL; } @@ -1093,20 +1111,11 @@ err: static int uadk_e_soft_rsa_keygen(RSA *rsa, int bits, BIGNUM *e, BN_GENCB *cb) { - const RSA_METHOD *default_meth = RSA_PKCS1_OpenSSL(); int ret; - if (!default_meth) { - fprintf(stderr, "failed to get soft method.\n"); - return UADK_E_FAIL; - } - UNUSED(cb); - RSA_set_method(rsa, default_meth); ret = RSA_generate_key_ex(rsa, bits, e, NULL); - RSA_set_method(rsa, rsa_hw_meth); - return ret; } @@ -1131,7 +1140,7 @@ static int rsa_fill_keygen_data(struct uadk_rsa_sess *rsa_sess, return UADK_E_FAIL; wd_rsa_get_crt_prikey_params(key_pair->prikey, NULL, NULL, NULL, - &keygen_param->wd_q, &keygen_param->wd_p); + &keygen_param->wd_q, &keygen_param->wd_p); if (!keygen_param->wd_q || !keygen_param->wd_p) return UADK_E_FAIL; @@ -1170,9 +1179,11 @@ static int rsa_keygen_param_alloc(struct rsa_keygen_param **keygen_param, struct rsa_keygen_param_bn **keygen_bn_param, struct rsa_keypair **key_pair) { + BN_CTX *bn_ctx; + *keygen_param = OPENSSL_malloc(sizeof(struct rsa_keygen_param)); if (!(*keygen_param)) - return -ENOMEM; + goto err; *keygen_bn_param = (struct rsa_keygen_param_bn *) OPENSSL_malloc(sizeof(struct rsa_keygen_param_bn)); @@ -1183,16 +1194,35 @@ static int rsa_keygen_param_alloc(struct rsa_keygen_param **keygen_param, if (!(*key_pair)) goto free_keygen_bn_param; - (*keygen_bn_param)->e = BN_new(); - (*keygen_bn_param)->p = BN_new(); - (*keygen_bn_param)->q = BN_new(); + bn_ctx = BN_CTX_new(); + if (!bn_ctx) + goto free_key_pair; + + BN_CTX_start(bn_ctx); + (*keygen_bn_param)->e = BN_CTX_get(bn_ctx); + if (!(*keygen_bn_param)->e) + goto free_bn_ctx; + + (*keygen_bn_param)->p = BN_CTX_get(bn_ctx); + if (!(*keygen_bn_param)->p) + goto free_bn_ctx; + + (*keygen_bn_param)->q = BN_CTX_get(bn_ctx); + if (!(*keygen_bn_param)->q) + goto free_bn_ctx; return UADK_E_SUCCESS; +free_bn_ctx: + BN_CTX_end(bn_ctx); + BN_CTX_free(bn_ctx); +free_key_pair: + OPENSSL_free(*key_pair); free_keygen_bn_param: OPENSSL_free(*keygen_bn_param); free_keygen_param: OPENSSL_free(*keygen_param); +err: return -ENOMEM; } @@ -1236,81 +1266,56 @@ static void rsa_pkey_param_free(struct rsa_pubkey_param **pub, } static int rsa_create_pub_bn_ctx(RSA *rsa, struct rsa_pubkey_param *pub, - BN_CTX **bn_ctx, unsigned char **from_buf) + unsigned char **from_buf, int *num_bytes) { - BIGNUM *ret_bn; - int num_bytes; - RSA_get0_key(rsa, &pub->n, &pub->e, NULL); - - *bn_ctx = BN_CTX_new(); - if (!(*bn_ctx)) + if (!(pub->n) || !(pub->e)) return UADK_E_FAIL; - BN_CTX_start(*bn_ctx); - ret_bn = BN_CTX_get(*bn_ctx); - if (!ret_bn) - goto err; - - num_bytes = BN_num_bytes(pub->n); - if (!num_bytes) - goto err; + *num_bytes = BN_num_bytes(pub->n); + if (!(*num_bytes)) + return UADK_E_FAIL; - *from_buf = OPENSSL_malloc(num_bytes); + *from_buf = OPENSSL_malloc(*num_bytes); if (!(*from_buf)) - goto err; + return -ENOMEM; return UADK_E_SUCCESS; - -err: - BN_CTX_free(*bn_ctx); - return UADK_E_FAIL; } -static void rsa_free_pub_bn_ctx(BN_CTX **bn_ctx, unsigned char **from_buf) +static void rsa_free_pub_bn_ctx(unsigned char **from_buf) { - BN_CTX_free(*bn_ctx); - OPENSSL_free(*from_buf); } static int rsa_create_pri_bn_ctx(RSA *rsa, struct rsa_prikey_param *pri, - BN_CTX **bn_ctx, unsigned char **from_buf) + unsigned char **from_buf, int *num_bytes) { - BIGNUM *ret_bn; - int num_bytes; - RSA_get0_key(rsa, &pri->n, &pri->e, &pri->d); - RSA_get0_factors(rsa, &pri->p, &pri->q); - RSA_get0_crt_params(rsa, &pri->dmp1, &pri->dmq1, &pri->iqmp); + if (!(pri->n) || !(pri->e) || !(pri->d)) + return UADK_E_FAIL; - *bn_ctx = BN_CTX_new(); - if (!(*bn_ctx)) + RSA_get0_factors(rsa, &pri->p, &pri->q); + if (!(pri->p) || !(pri->q)) return UADK_E_FAIL; - BN_CTX_start(*bn_ctx); - ret_bn = BN_CTX_get(*bn_ctx); - if (!ret_bn) - goto err; + RSA_get0_crt_params(rsa, &pri->dmp1, &pri->dmq1, &pri->iqmp); + if (!(pri->dmp1) || !(pri->dmq1) || !(pri->iqmp)) + return UADK_E_FAIL; - num_bytes = BN_num_bytes(pri->n); - if (!num_bytes) - goto err; + *num_bytes = BN_num_bytes(pri->n); + if (!(*num_bytes)) + return UADK_E_FAIL; - *from_buf = OPENSSL_malloc(num_bytes); + *from_buf = OPENSSL_malloc(*num_bytes); if (!(*from_buf)) - goto err; + return -ENOMEM; return UADK_E_SUCCESS; -err: - BN_CTX_free(*bn_ctx); - return UADK_E_FAIL; } -static void rsa_free_pri_bn_ctx(BN_CTX **bn_ctx, unsigned char **from_buf) +static void rsa_free_pri_bn_ctx(unsigned char **from_buf) { - BN_CTX_free(*bn_ctx); - OPENSSL_free(*from_buf); } @@ -1318,14 +1323,13 @@ static int uadk_e_rsa_keygen(RSA *rsa, int bits, BIGNUM *e, BN_GENCB *cb) { struct rsa_keygen_param *keygen_param = NULL; struct rsa_keygen_param_bn *bn_param = NULL; + struct uadk_rsa_sess *rsa_sess = NULL; struct rsa_keypair *key_pair = NULL; - struct uadk_rsa_sess *rsa_sess; int is_crt = 1; - int key_size; int ret; - key_size = rsa_check_bit_useful(bits, 0); - if (!key_size || key_size == SOFT) + ret = rsa_check_bit_useful(bits, 0); + if (!ret || ret == SOFT) goto exe_soft; ret = uadk_e_rsa_init(); @@ -1388,14 +1392,11 @@ exe_soft: static int uadk_e_rsa_public_encrypt(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding) { + struct uadk_rsa_sess *rsa_sess = NULL; struct rsa_pubkey_param *pub = NULL; - struct uadk_rsa_sess *rsa_sess; unsigned char *from_buf = NULL; + int num_bytes, is_crt, ret; BIGNUM *ret_bn = NULL; - BN_CTX *bn_ctx = NULL; - int num_bytes; - int is_crt; - int ret; ret = check_rsa_input_para(flen, from, to, rsa); if (!ret || ret == SOFT) @@ -1417,18 +1418,12 @@ static int uadk_e_rsa_public_encrypt(int flen, const unsigned char *from, goto free_pkey; } - ret = rsa_create_pub_bn_ctx(rsa, pub, &bn_ctx, &from_buf); - if (!ret) { + ret = rsa_create_pub_bn_ctx(rsa, pub, &from_buf, &num_bytes); + if (ret <= 0 || flen > num_bytes) { ret = UADK_DO_SOFT; goto free_sess; } - num_bytes = BN_num_bytes(pub->n); - if (flen > num_bytes) { - ret = UADK_DO_SOFT; - goto free_buf; - } - ret = add_rsa_pubenc_padding(flen, from, from_buf, num_bytes, padding); if (!ret) { ret = UADK_DO_SOFT; @@ -1448,7 +1443,7 @@ static int uadk_e_rsa_public_encrypt(int flen, const unsigned char *from, } ret_bn = BN_bin2bn((const unsigned char *)rsa_sess->req.dst, - rsa_sess->req.dst_bytes, ret_bn); + rsa_sess->req.dst_bytes, NULL); if (!ret_bn) { ret = UADK_DO_SOFT; goto free_buf; @@ -1457,11 +1452,13 @@ static int uadk_e_rsa_public_encrypt(int flen, const unsigned char *from, ret = BN_bn2binpad(ret_bn, to, num_bytes); if (ret == -1) { ret = UADK_DO_SOFT; - goto free_buf; + goto free_bn; } +free_bn: + BN_free(ret_bn); free_buf: - rsa_free_pub_bn_ctx(&bn_ctx, &from_buf); + rsa_free_pub_bn_ctx(&from_buf); free_sess: rsa_free_eng_session(rsa_sess); free_pkey: @@ -1480,11 +1477,8 @@ static int uadk_e_rsa_private_decrypt(int flen, const unsigned char *from, struct rsa_prikey_param *pri = NULL; unsigned char *from_buf = NULL; struct uadk_rsa_sess *rsa_sess; + int num_bytes, len, ret; BIGNUM *ret_bn = NULL; - BN_CTX *bn_ctx = NULL; - int num_bytes; - int ret; - int len; ret = check_rsa_input_para(flen, from, to, rsa); if (!ret || ret == SOFT) @@ -1506,18 +1500,12 @@ static int uadk_e_rsa_private_decrypt(int flen, const unsigned char *from, goto free_pkey; } - ret = rsa_create_pri_bn_ctx(rsa, pri, &bn_ctx, &from_buf); - if (!ret) { + ret = rsa_create_pri_bn_ctx(rsa, pri, &from_buf, &num_bytes); + if (ret <= 0 || flen > num_bytes) { ret = UADK_DO_SOFT; goto free_sess; } - num_bytes = BN_num_bytes(pri->n); - if (flen > num_bytes) { - ret = UADK_DO_SOFT; - goto free_buf; - } - ret = rsa_fill_prikey(rsa, rsa_sess, pri, from_buf, to); if (!ret) { ret = UADK_DO_SOFT; @@ -1533,7 +1521,7 @@ static int uadk_e_rsa_private_decrypt(int flen, const unsigned char *from, } ret_bn = BN_bin2bn((const unsigned char *)rsa_sess->req.dst, - rsa_sess->req.dst_bytes, ret_bn); + rsa_sess->req.dst_bytes, NULL); if (!ret_bn) { ret = UADK_DO_SOFT; goto free_buf; @@ -1542,17 +1530,19 @@ static int uadk_e_rsa_private_decrypt(int flen, const unsigned char *from, len = BN_bn2binpad(ret_bn, from_buf, num_bytes); if (!len) { ret = UADK_DO_SOFT; - goto free_buf; + goto free_bn; } ret = check_rsa_pridec_padding(to, num_bytes, from_buf, len, padding); if (!ret) { ret = UADK_DO_SOFT; - goto free_buf; + goto free_bn; } +free_bn: + BN_free(ret_bn); free_buf: - rsa_free_pri_bn_ctx(&bn_ctx, &from_buf); + rsa_free_pri_bn_ctx(&from_buf); free_sess: rsa_free_eng_session(rsa_sess); free_pkey: @@ -1568,14 +1558,13 @@ exe_soft: static int uadk_e_rsa_private_sign(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding) { + struct uadk_rsa_sess *rsa_sess = NULL; struct rsa_prikey_param *pri = NULL; - struct uadk_rsa_sess *rsa_sess; unsigned char *from_buf = NULL; - BIGNUM *to_bn, *ret_bn; - BN_CTX *bn_ctx = NULL; + BIGNUM *ret_bn = NULL; + BIGNUM *to_bn = NULL; BIGNUM *res = NULL; - int num_bytes; - int ret; + int num_bytes, ret; ret = check_rsa_input_para(flen, from, to, rsa); if (!ret || ret == SOFT) @@ -1597,36 +1586,18 @@ static int uadk_e_rsa_private_sign(int flen, const unsigned char *from, goto free_pkey; } - ret = rsa_create_pri_bn_ctx(rsa, pri, &bn_ctx, &from_buf); - if (!ret) { + ret = rsa_create_pri_bn_ctx(rsa, pri, &from_buf, &num_bytes); + if (ret <= 0 || flen > num_bytes) { ret = UADK_DO_SOFT; goto free_sess; } - to_bn = BN_CTX_get(bn_ctx); - if (!to_bn) { - ret = UADK_DO_SOFT; - goto free_buf; - } - - num_bytes = BN_num_bytes(pri->n); - if (flen > num_bytes) { - ret = UADK_DO_SOFT; - goto free_buf; - } - ret = add_rsa_prienc_padding(flen, from, from_buf, num_bytes, padding); if (!ret) { ret = UADK_DO_SOFT; goto free_buf; } - ret_bn = BN_bin2bn(from_buf, num_bytes, to_bn); - if (!ret_bn) { - ret = UADK_DO_SOFT; - goto free_buf; - } - ret = rsa_fill_prikey(rsa, rsa_sess, pri, from_buf, to); if (!ret) { ret = UADK_DO_SOFT; @@ -1639,24 +1610,33 @@ static int uadk_e_rsa_private_sign(int flen, const unsigned char *from, goto free_buf; } - ret_bn = NULL; ret_bn = BN_bin2bn((const unsigned char *)rsa_sess->req.dst, - rsa_sess->req.dst_bytes, ret_bn); + rsa_sess->req.dst_bytes, NULL); if (!ret_bn) { ret = UADK_DO_SOFT; goto free_buf; } + to_bn = BN_bin2bn(from_buf, num_bytes, NULL); + if (!to_bn) { + ret = UADK_DO_SOFT; + goto free_ret_bn; + } + ret = rsa_get_sign_res(padding, to_bn, pri->n, ret_bn, &res); if (!ret) { ret = UADK_DO_SOFT; - goto free_buf; + goto free_to_bn; } ret = BN_bn2binpad(res, to, num_bytes); +free_to_bn: + BN_free(to_bn); +free_ret_bn: + BN_free(ret_bn); free_buf: - rsa_free_pri_bn_ctx(&bn_ctx, &from_buf); + rsa_free_pri_bn_ctx(&from_buf); free_sess: rsa_free_eng_session(rsa_sess); free_pkey: @@ -1672,15 +1652,11 @@ exe_soft: static int uadk_e_rsa_public_verify(int flen, const unsigned char *from, unsigned char *to, RSA *rsa, int padding) { - struct uadk_rsa_sess *rsa_sess; + struct uadk_rsa_sess *rsa_sess = NULL; + struct rsa_pubkey_param *pub = NULL; + int num_bytes, is_crt, len, ret; unsigned char *from_buf = NULL; - struct rsa_pubkey_param *pub; - BIGNUM *ret_bn, *to_bn; - BN_CTX *bn_ctx = NULL; - int num_bytes; - int is_crt; - int ret; - int len; + BIGNUM *ret_bn = NULL; ret = check_rsa_input_para(flen, from, to, rsa); if (!ret) @@ -1704,25 +1680,12 @@ static int uadk_e_rsa_public_verify(int flen, const unsigned char *from, goto free_pkey; } - ret = rsa_create_pub_bn_ctx(rsa, pub, &bn_ctx, &from_buf); - if (!ret) { + ret = rsa_create_pub_bn_ctx(rsa, pub, &from_buf, &num_bytes); + if (ret <= 0 || flen > num_bytes) { ret = UADK_DO_SOFT; goto free_sess; } - to_bn = BN_CTX_get(bn_ctx); - if (!to_bn) { - ret = UADK_DO_SOFT; - goto free_buf; - } - - num_bytes = BN_num_bytes(pub->n); - ret_bn = BN_bin2bn(from_buf, num_bytes, to_bn); - if (!ret_bn) { - ret = UADK_DO_SOFT; - goto free_buf; - } - ret = rsa_fill_pubkey(pub, rsa_sess, from_buf, to); if (!ret) { ret = UADK_DO_SOFT; @@ -1736,34 +1699,35 @@ static int uadk_e_rsa_public_verify(int flen, const unsigned char *from, goto free_buf; } - ret_bn = NULL; ret_bn = BN_bin2bn((const unsigned char *)rsa_sess->req.dst, - rsa_sess->req.dst_bytes, ret_bn); + rsa_sess->req.dst_bytes, NULL); if (!ret_bn) { ret = UADK_DO_SOFT; goto free_buf; } - ret = rsa_get_verify_res(padding, to_bn, pub->n, ret_bn); + ret = rsa_get_verify_res(padding, pub->n, ret_bn); if (!ret) { ret = UADK_DO_SOFT; - goto free_buf; + goto free_bn; } len = BN_bn2binpad(ret_bn, from_buf, num_bytes); if (!len) { ret = UADK_DO_SOFT; - goto free_buf; + goto free_bn; } ret = check_rsa_pubdec_padding(to, num_bytes, from_buf, len, padding); if (!ret) { ret = UADK_DO_SOFT; - goto free_buf; + goto free_bn; } +free_bn: + BN_free(ret_bn); free_buf: - rsa_free_pub_bn_ctx(&bn_ctx, &from_buf); + rsa_free_pub_bn_ctx(&from_buf); free_sess: rsa_free_eng_session(rsa_sess); free_pkey: @@ -1786,7 +1750,7 @@ static RSA_METHOD *uadk_e_get_rsa_sw_methods(void) (void)RSA_meth_set_priv_enc(rsa_sw_meth, RSA_meth_get_priv_enc(meth)); (void)RSA_meth_set_pub_dec(rsa_sw_meth, RSA_meth_get_pub_dec(meth)); (void)RSA_meth_set_priv_dec(rsa_sw_meth, RSA_meth_get_priv_dec(meth)); - (void)RSA_meth_set_keygen(rsa_sw_meth, RSA_meth_get_keygen(meth)); + (void)RSA_meth_set_keygen(rsa_sw_meth, uadk_e_soft_rsa_keygen); (void)RSA_meth_set_mod_exp(rsa_sw_meth, RSA_meth_get_mod_exp(meth)); (void)RSA_meth_set_bn_mod_exp(rsa_sw_meth, RSA_meth_get_bn_mod_exp(meth)); @@ -1798,6 +1762,7 @@ static RSA_METHOD *uadk_e_get_rsa_hw_methods(void) { if (rsa_hw_meth) return rsa_hw_meth; + rsa_hw_meth = RSA_meth_new("uadk hardware rsa method", 0); if (!rsa_hw_meth) { fprintf(stderr, "failed to allocate rsa hardware method\n"); -- 2.33.0

1 0

[PATCH] uadk: parse epoll flag from environment variable
by Zhiqi Song 16 Mar '22

16 Mar '22

From: Wenkai Lin <linwenkai6(a)hisilicon.com> wd_parse_epoll_en is used to parse epoll enable flag from environment variable, it's return value is stored in global variable of each process. When uadk works in synchronize mode, it will check the global variable and decide whether to use wd_ctx_wait. HPRE algorithm(ecc, rsa, dh) is also support epoll wait now. Signed-off-by: Wenkai Lin <linwenkai6(a)hisilicon.com> --- docs/wd_environment_variable | 5 +++ drv/hisi_comp.c | 5 +-- drv/hisi_hpre.c | 3 ++ drv/hisi_qm_udrv.c | 21 ++----------- drv/hisi_sec.c | 15 ++------- include/drv/wd_aead_drv.h | 2 -- include/drv/wd_cipher_drv.h | 2 -- include/drv/wd_comp_drv.h | 2 -- include/drv/wd_digest_drv.h | 2 -- include/hisi_qm_udrv.h | 4 +-- include/wd_alg_common.h | 2 ++ include/wd_util.h | 9 ++++++ wd_aead.c | 24 ++++++--------- wd_cipher.c | 24 ++++++--------- wd_comp.c | 27 ++++++++-------- wd_dh.c | 24 +++++++++------ wd_digest.c | 25 +++++++-------- wd_ecc.c | 24 +++++++++------ wd_rsa.c | 24 +++++++++------ wd_sched.c | 2 +- wd_util.c | 60 ++++++++++++++++++++++++++++-------- 21 files changed, 165 insertions(+), 141 deletions(-) diff --git a/docs/wd_environment_variable b/docs/wd_environment_variable index 3ada5fb..8ac2da7 100644 --- a/docs/wd_environment_variable +++ b/docs/wd_environment_variable @@ -47,6 +47,11 @@ WD_<alg>_ASYNC_POLL_NUM WD_<alg>_ASYNC_POLL_NUM=2@0,4@2 means to configure 2 async polling threads in node0, and 4 polling threads in node2. +WD_<alg>_EPOLL_EN + Define if wd_do_<alg>_sync enable wd_ctx_wait in WD. WD_<alg>_EPOLL_EN=1 + means enable wd_ctx_wait in WD, driver will wait to receive the package until + hardware is done with package, otherwise driver will try to receive the package + directly after the package is sent. 2. User model ============= diff --git a/drv/hisi_comp.c b/drv/hisi_comp.c index 841ae03..43c8688 100644 --- a/drv/hisi_comp.c +++ b/drv/hisi_comp.c @@ -779,6 +779,9 @@ static int hisi_zip_init(struct wd_ctx_config_internal *config, void *priv) qm_priv.sqe_size = sizeof(struct hisi_zip_sqe); qm_priv.op_type = config->ctxs[i].op_type; qm_priv.qp_mode = config->ctxs[i].ctx_mode; + /* Setting the epoll en to 0 for ASYNC ctx */ + qm_priv.epoll_en = (qm_priv.qp_mode == CTX_MODE_SYNC) ? + config->epoll_en : 0; qm_priv.idx = i; h_qp = hisi_qm_alloc_qp(&qm_priv, h_ctx); if (unlikely(!h_qp)) @@ -882,8 +885,6 @@ static int hisi_zip_comp_send(handle_t ctx, struct wd_comp_msg *msg, void *priv) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } diff --git a/drv/hisi_hpre.c b/drv/hisi_hpre.c index 018fe5b..f0ec540 100644 --- a/drv/hisi_hpre.c +++ b/drv/hisi_hpre.c @@ -465,6 +465,9 @@ static int hpre_init(struct wd_ctx_config_internal *config, void *priv, const ch for (i = 0; i < config->ctx_num; i++) { h_ctx = config->ctxs[i].ctx; qm_priv.qp_mode = config->ctxs[i].ctx_mode; + /* Setting the epoll en to 0 for ASYNC ctx */ + qm_priv.epoll_en = (qm_priv.qp_mode == CTX_MODE_SYNC) ? + config->epoll_en : 0; qm_priv.idx = i; h_qp = hisi_qm_alloc_qp(&qm_priv, h_ctx); if (!h_qp) { diff --git a/drv/hisi_qm_udrv.c b/drv/hisi_qm_udrv.c index be06570..2c0d87c 100644 --- a/drv/hisi_qm_udrv.c +++ b/drv/hisi_qm_udrv.c @@ -309,6 +309,7 @@ static int hisi_qm_setup_info(struct hisi_qp *qp, struct hisi_qm_priv *config) } q_info->qp_mode = config->qp_mode; + q_info->epoll_en = config->epoll_en; q_info->idx = config->idx; q_info->sqe_size = config->sqe_size; q_info->cqc_phase = 1; @@ -479,7 +480,7 @@ static int hisi_qm_recv_single(struct hisi_qm_queue_info *q_info, void *resp) i++; } - q_info->db(q_info, QM_DBELL_CMD_CQ, i, 0); + q_info->db(q_info, QM_DBELL_CMD_CQ, i, q_info->epoll_en); /* only support one thread poll one queue, so no need protect */ q_info->cq_head_index = i; @@ -919,21 +920,3 @@ __u32 hisi_qm_get_list_size(struct wd_datalist *start_node, return lits_size; } - -void hisi_qm_enable_interrupt(handle_t ctx, __u8 enable) -{ - struct hisi_qm_queue_info *q_info; - struct hisi_qp *qp; - handle_t h_qp; - - if (!enable) - return; - - h_qp = (handle_t)wd_ctx_get_priv(ctx); - qp = (struct hisi_qp *)h_qp; - q_info = &qp->q_info; - - pthread_spin_lock(&q_info->lock); - q_info->db(q_info, QM_DBELL_CMD_CQ, q_info->cq_head_index, 1); - pthread_spin_unlock(&q_info->lock); -} diff --git a/drv/hisi_sec.c b/drv/hisi_sec.c index aa86a6b..0732cdc 100644 --- a/drv/hisi_sec.c +++ b/drv/hisi_sec.c @@ -959,8 +959,6 @@ int hisi_sec_cipher_send(handle_t ctx, struct wd_cipher_msg *msg) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } @@ -1162,8 +1160,6 @@ int hisi_sec_cipher_send_v3(handle_t ctx, struct wd_cipher_msg *msg) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } @@ -1403,8 +1399,6 @@ int hisi_sec_digest_send(handle_t ctx, struct wd_digest_msg *msg) goto put_sgl; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; put_sgl: @@ -1560,8 +1554,6 @@ int hisi_sec_digest_send_v3(handle_t ctx, struct wd_digest_msg *msg) goto put_sgl; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; put_sgl: @@ -1913,8 +1905,6 @@ int hisi_sec_aead_send(handle_t ctx, struct wd_aead_msg *msg) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } @@ -2181,8 +2171,6 @@ int hisi_sec_aead_send_v3(handle_t ctx, struct wd_aead_msg *msg) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } @@ -2285,6 +2273,9 @@ int hisi_sec_init(struct wd_ctx_config_internal *config, void *priv) /* setting the type is 0 for sqc_type */ qm_priv.op_type = 0; qm_priv.qp_mode = config->ctxs[i].ctx_mode; + /* Setting the epoll en to 0 for ASYNC ctx */ + qm_priv.epoll_en = (qm_priv.qp_mode == CTX_MODE_SYNC) ? + config->epoll_en : 0; qm_priv.idx = i; h_qp = hisi_qm_alloc_qp(&qm_priv, h_ctx); if (!h_qp) diff --git a/include/drv/wd_aead_drv.h b/include/drv/wd_aead_drv.h index 78a5673..137e70a 100644 --- a/include/drv/wd_aead_drv.h +++ b/include/drv/wd_aead_drv.h @@ -31,8 +31,6 @@ struct wd_aead_msg { __u8 data_fmt; /* Operation result, denoted by WD error code */ __u8 result; - /* epoll flag */ - __u8 is_polled; /* in bytes */ __u32 in_bytes; diff --git a/include/drv/wd_cipher_drv.h b/include/drv/wd_cipher_drv.h index e649869..87b77d3 100644 --- a/include/drv/wd_cipher_drv.h +++ b/include/drv/wd_cipher_drv.h @@ -28,8 +28,6 @@ struct wd_cipher_msg { __u8 data_fmt; /* Operation result, denoted by WD error code */ __u8 result; - /* epoll flag */ - __u8 is_polled; /* Key bytes */ __u16 key_bytes; diff --git a/include/drv/wd_comp_drv.h b/include/drv/wd_comp_drv.h index 8146a50..73403b5 100644 --- a/include/drv/wd_comp_drv.h +++ b/include/drv/wd_comp_drv.h @@ -50,8 +50,6 @@ struct wd_comp_msg { __u32 checksum; /* Request identifier */ __u32 tag; - /* Epoll flag */ - __u8 is_polled; }; struct wd_comp_driver { diff --git a/include/drv/wd_digest_drv.h b/include/drv/wd_digest_drv.h index fdde772..6907bc5 100644 --- a/include/drv/wd_digest_drv.h +++ b/include/drv/wd_digest_drv.h @@ -27,8 +27,6 @@ struct wd_digest_msg { __u8 data_fmt; /* Operation result, denoted by WD error code */ __u8 result; - /* epoll flag */ - __u8 is_polled; /* user identifier: struct wcrypto_cb_tag */ __u64 usr_data; diff --git a/include/hisi_qm_udrv.h b/include/hisi_qm_udrv.h index 707d0e3..43f42d9 100644 --- a/include/hisi_qm_udrv.h +++ b/include/hisi_qm_udrv.h @@ -47,6 +47,7 @@ struct hisi_qm_priv { __u16 op_type; /* index of ctxs */ __u32 idx; + int epoll_en; }; struct hisi_qm_queue_info { @@ -71,6 +72,7 @@ struct hisi_qm_queue_info { bool cqc_phase; pthread_spinlock_t lock; unsigned long region_size[UACCE_QFRT_MAX]; + int epoll_en; }; struct hisi_qp { @@ -182,8 +184,6 @@ int hisi_qm_get_free_sqe_num(handle_t h_qp); __u32 hisi_qm_get_list_size(struct wd_datalist *start_node, struct wd_datalist *end_node); -void hisi_qm_enable_interrupt(handle_t ctx, __u8 enable); - #ifdef __cplusplus } #endif diff --git a/include/wd_alg_common.h b/include/wd_alg_common.h index 94336f0..0affa96 100644 --- a/include/wd_alg_common.h +++ b/include/wd_alg_common.h @@ -27,6 +27,7 @@ extern "C" { #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) #define MAX_STR_LEN 256 #define CTX_TYPE_INVALID 9999 +#define POLL_TIME 1000 enum wd_ctx_mode { CTX_MODE_SYNC = 0, @@ -74,6 +75,7 @@ struct wd_ctx_config_internal { struct wd_ctx_internal *ctxs; void *priv; int pid; + int epoll_en; }; /** diff --git a/include/wd_util.h b/include/wd_util.h index 2d3c1e4..73ba96a 100644 --- a/include/wd_util.h +++ b/include/wd_util.h @@ -314,6 +314,15 @@ int wd_set_ctx_attr(struct wd_ctx_attr *ctx_attr, */ int wd_check_ctx(struct wd_ctx_config_internal *config, __u8 mode, __u32 idx); +/** + * wd_get_epoll_en() - Get epoll enable value from environment variable. + * @var_name: Environment variable name string. + * + * Return environment variable value, if the value is not 0 or 1, + * return -WD_EINVAL instead. + */ +int wd_get_epoll_en(const char *var_name); + #ifdef __cplusplus } #endif diff --git a/wd_aead.c b/wd_aead.c index 74047b5..f1bde0a 100644 --- a/wd_aead.c +++ b/wd_aead.c @@ -21,8 +21,6 @@ #define WD_POOL_MAX_ENTRIES 1024 #define MAX_RETRY_COUNTS 200000000 -#define POLL_SIZE 70000 -#define POLL_TIME 1000 static int g_aead_mac_len[WD_DIGEST_TYPE_MAX] = { WD_DIGEST_SM3_LEN, WD_DIGEST_MD5_LEN, WD_DIGEST_SHA1_LEN, @@ -414,17 +412,19 @@ int wd_aead_init(struct wd_ctx_config *config, struct wd_sched *sched) if (ret) return ret; + ret = wd_get_epoll_en("WD_AEAD_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_aead_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_aead_setting.config, config); - if (ret) { - WD_ERR("failed to set config, ret = %d\n", ret); + if (ret) return ret; - } ret = wd_init_sched(&wd_aead_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d\n", ret); + if (ret < 0) goto out; - } /* set driver */ #ifdef WD_STATIC_DRV @@ -435,10 +435,8 @@ int wd_aead_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_aead_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_aead_msg)); - if (ret < 0) { - WD_ERR("failed to init aead aysnc request pool.\n"); + if (ret < 0) goto out_sched; - } /* init ctx related resources in specific driver */ priv = calloc(1, wd_aead_setting.driver->drv_ctx_size); @@ -525,7 +523,7 @@ static int send_recv_sync(struct wd_ctx_internal *ctx, } do { - if (msg->is_polled) { + if (wd_aead_setting.config.epoll_en) { ret = wd_ctx_wait(ctx->ctx, POLL_TIME); if (unlikely(ret < 0)) WD_ERR("wd aead ctx wait timeout(%d)!\n", ret); @@ -563,7 +561,6 @@ int wd_do_aead_sync(handle_t h_sess, struct wd_aead_req *req) memset(&msg, 0, sizeof(struct wd_aead_msg)); fill_request_msg(&msg, req, sess); - msg.is_polled = (req->in_bytes >= POLL_SIZE); req->state = 0; idx = wd_aead_setting.sched.pick_next_ctx( @@ -616,7 +613,6 @@ int wd_do_aead_async(handle_t h_sess, struct wd_aead_req *req) fill_request_msg(msg, req, sess); msg->tag = msg_id; - msg->is_polled = 0; ret = wd_aead_setting.driver->aead_send(ctx->ctx, msg); if (unlikely(ret < 0)) { diff --git a/wd_cipher.c b/wd_cipher.c index 563eece..9b7b150 100644 --- a/wd_cipher.c +++ b/wd_cipher.c @@ -22,8 +22,6 @@ #define DES_WEAK_KEY_NUM 16 #define MAX_RETRY_COUNTS 200000000 -#define POLL_SIZE 100000 -#define POLL_TIME 1000 static const unsigned char des_weak_keys[DES_WEAK_KEY_NUM][DES_KEY_SIZE] = { /* weak keys */ @@ -255,17 +253,19 @@ int wd_cipher_init(struct wd_ctx_config *config, struct wd_sched *sched) if (ret) return ret; + ret = wd_get_epoll_en("WD_CIPHER_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_cipher_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_cipher_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } ret = wd_init_sched(&wd_cipher_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } #ifdef WD_STATIC_DRV /* set driver */ @@ -276,10 +276,8 @@ int wd_cipher_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_cipher_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_cipher_msg)); - if (ret < 0) { - WD_ERR("failed to init req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } /* init ctx related resources in specific driver */ priv = calloc(1, wd_cipher_setting.driver->drv_ctx_size); @@ -436,7 +434,7 @@ static int send_recv_sync(struct wd_ctx_internal *ctx, } do { - if (msg->is_polled) { + if (wd_cipher_setting.config.epoll_en) { ret = wd_ctx_wait(ctx->ctx, POLL_TIME); if (unlikely(ret < 0)) WD_ERR("wd cipher ctx wait timeout(%d)!\n", ret); @@ -476,7 +474,6 @@ int wd_do_cipher_sync(handle_t h_sess, struct wd_cipher_req *req) memset(&msg, 0, sizeof(struct wd_cipher_msg)); fill_request_msg(&msg, req, sess); - msg.is_polled = (req->in_bytes >= POLL_SIZE); req->state = 0; idx = wd_cipher_setting.sched.pick_next_ctx( @@ -526,7 +523,6 @@ int wd_do_cipher_async(handle_t h_sess, struct wd_cipher_req *req) fill_request_msg(msg, req, sess); msg->tag = msg_id; - msg->is_polled = 0; ret = wd_cipher_setting.driver->cipher_send(ctx->ctx, msg); if (unlikely(ret < 0)) { diff --git a/wd_comp.c b/wd_comp.c index 9a71dfc..1f6324c 100644 --- a/wd_comp.c +++ b/wd_comp.c @@ -22,8 +22,6 @@ #define HW_CTX_SIZE (64 * 1024) #define STREAM_CHUNK (128 * 1024) -#define POLL_SIZE 250000 -#define POLL_TIME 1000 #define swap_byte(x) \ ((((x) & 0x000000ff) << 24) | \ @@ -97,16 +95,19 @@ int wd_comp_init(struct wd_ctx_config *config, struct wd_sched *sched) return -WD_EINVAL; } + ret = wd_get_epoll_en("WD_COMP_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_comp_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_comp_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } + ret = wd_init_sched(&wd_comp_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } /* * Fix me: ctx could be passed into wd_comp_set_static_drv to help to * choose static compiled vendor driver. For dynamic vendor driver, @@ -125,10 +126,9 @@ int wd_comp_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_comp_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_comp_msg)); - if (ret < 0) { - WD_ERR("failed to init req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } + /* init ctx related resources in specific driver */ priv = calloc(1, wd_comp_setting.driver->drv_ctx_size); if (!priv) { @@ -429,7 +429,7 @@ static int wd_comp_sync_job(struct wd_comp_sess *sess, } do { - if (msg->is_polled) { + if (config->epoll_en) { ret = wd_ctx_wait(ctx->ctx, POLL_TIME); if (unlikely(ret < 0)) WD_ERR("wd ctx wait timeout, ret = %d!\n", ret); @@ -472,7 +472,6 @@ int wd_do_comp_sync(handle_t h_sess, struct wd_comp_req *req) fill_comp_msg(sess, &msg, req); msg.ctx_buf = sess->ctx_buf; - msg.is_polled = (req->src_len >= POLL_SIZE); msg.stream_mode = WD_COMP_STATELESS; ret = wd_comp_sync_job(sess, req, &msg); @@ -643,7 +642,6 @@ int wd_do_comp_strm(handle_t h_sess, struct wd_comp_req *req) /* fill true flag */ msg.req.last = req->last; msg.stream_mode = WD_COMP_STATEFUL; - msg.is_polled = (req->src_len >= POLL_SIZE); src_len = req->src_len; @@ -701,7 +699,6 @@ int wd_do_comp_async(handle_t h_sess, struct wd_comp_req *req) fill_comp_msg(sess, msg, req); msg->tag = tag; msg->stream_mode = WD_COMP_STATELESS; - msg->is_polled = 0; pthread_spin_lock(&ctx->lock); diff --git a/wd_dh.c b/wd_dh.c index c0d3e00..b9dd075 100644 --- a/wd_dh.c +++ b/wd_dh.c @@ -101,17 +101,19 @@ int wd_dh_init(struct wd_ctx_config *config, struct wd_sched *sched) if (param_check(config, sched)) return -WD_EINVAL; + ret = wd_get_epoll_en("WD_DH_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_dh_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_dh_setting.config, config); - if (ret) { - WD_ERR("failed to initialize ctx config, ret = %d!\n", ret); + if (ret) return ret; - } ret = wd_init_sched(&wd_dh_setting.sched, sched); - if (ret) { - WD_ERR("failed to initialize sched, ret = %d!\n", ret); + if (ret) goto out; - } #ifdef WD_STATIC_DRV wd_dh_set_static_drv(); @@ -121,10 +123,8 @@ int wd_dh_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_dh_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_dh_msg)); - if (ret) { - WD_ERR("failed to initialize async req pool, ret = %d!\n", ret); + if (ret) goto out_sched; - } /* initialize ctx related resources in specific driver */ priv = calloc(1, wd_dh_setting.driver->drv_ctx_size); @@ -236,6 +236,12 @@ static int dh_recv_sync(handle_t ctx, struct wd_dh_msg *msg) int ret; do { + if (wd_dh_setting.config.epoll_en) { + ret = wd_ctx_wait(ctx, POLL_TIME); + if (ret < 0) + WD_ERR("wd ctx wait timeout(%d)!\n", ret); + } + ret = wd_dh_setting.driver->recv(ctx, msg); if (ret == -WD_EAGAIN) { if (rx_cnt++ >= DH_RECV_MAX_CNT) { diff --git a/wd_digest.c b/wd_digest.c index 0ddc074..44b86c4 100644 --- a/wd_digest.c +++ b/wd_digest.c @@ -19,8 +19,6 @@ #define DES_WEAK_KEY_NUM 4 #define MAX_RETRY_COUNTS 200000000 -#define POLL_SIZE 100000 -#define POLL_TIME 1000 static int g_digest_mac_len[WD_DIGEST_TYPE_MAX] = { WD_DIGEST_SM3_LEN, WD_DIGEST_MD5_LEN, WD_DIGEST_SHA1_LEN, @@ -28,6 +26,7 @@ static int g_digest_mac_len[WD_DIGEST_TYPE_MAX] = { WD_DIGEST_SHA384_LEN, WD_DIGEST_SHA512_LEN, WD_DIGEST_SHA512_224_LEN, WD_DIGEST_SHA512_256_LEN }; + struct wd_digest_setting { struct wd_ctx_config_internal config; struct wd_sched sched; @@ -175,17 +174,19 @@ int wd_digest_init(struct wd_ctx_config *config, struct wd_sched *sched) if (ret) return ret; + ret = wd_get_epoll_en("WD_DIGEST_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_digest_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_digest_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } ret = wd_init_sched(&wd_digest_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } /* set driver */ #ifdef WD_STATIC_DRV @@ -196,10 +197,8 @@ int wd_digest_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_digest_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_digest_msg)); - if (ret < 0) { - WD_ERR("failed to init req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } /* init ctx related resources in specific driver */ priv = calloc(1, wd_digest_setting.driver->drv_ctx_size); @@ -322,7 +321,7 @@ static int send_recv_sync(struct wd_ctx_internal *ctx, struct wd_digest_sess *ds } do { - if (msg->is_polled) { + if (wd_digest_setting.config.epoll_en) { ret = wd_ctx_wait(ctx->ctx, POLL_TIME); if (unlikely(ret < 0)) WD_ERR("wd digest ctx wait timeout(%d)!\n", ret); @@ -367,7 +366,6 @@ int wd_do_digest_sync(handle_t h_sess, struct wd_digest_req *req) memset(&msg, 0, sizeof(struct wd_digest_msg)); fill_request_msg(&msg, req, dsess); - msg.is_polled = (req->in_bytes >= POLL_SIZE); req->state = 0; idx = wd_digest_setting.sched.pick_next_ctx( @@ -420,7 +418,6 @@ int wd_do_digest_async(handle_t h_sess, struct wd_digest_req *req) fill_request_msg(msg, req, dsess); msg->tag = msg_id; - msg->is_polled = 0; ret = wd_digest_setting.driver->digest_send(ctx->ctx, msg); if (unlikely(ret < 0)) { diff --git a/wd_ecc.c b/wd_ecc.c index af62b9a..bebe2e5 100644 --- a/wd_ecc.c +++ b/wd_ecc.c @@ -155,17 +155,19 @@ int wd_ecc_init(struct wd_ctx_config *config, struct wd_sched *sched) if (init_param_check(config, sched)) return -WD_EINVAL; + ret = wd_get_epoll_en("WD_ECC_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_ecc_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_ecc_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } ret = wd_init_sched(&wd_ecc_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } #ifdef WD_STATIC_DRV wd_ecc_set_static_drv(); @@ -175,10 +177,8 @@ int wd_ecc_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_ecc_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_ecc_msg)); - if (ret < 0) { - WD_ERR("failed to initialize async req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } /* initialize ctx related resources in specific driver */ priv = calloc(1, wd_ecc_setting.driver->drv_ctx_size); @@ -1413,6 +1413,12 @@ static int ecc_send(handle_t ctx, struct wd_ecc_msg *msg) int ret; do { + if (wd_ecc_setting.config.epoll_en) { + ret = wd_ctx_wait(ctx, POLL_TIME); + if (ret < 0) + WD_ERR("wd ctx wait timeout(%d)!\n", ret); + } + ret = wd_ecc_setting.driver->send(ctx, msg); if (ret == -WD_EBUSY) { if (tx_cnt++ >= ECC_RESEND_CNT) { diff --git a/wd_rsa.c b/wd_rsa.c index 8371475..1eec345 100644 --- a/wd_rsa.c +++ b/wd_rsa.c @@ -141,17 +141,19 @@ int wd_rsa_init(struct wd_ctx_config *config, struct wd_sched *sched) if (param_check(config, sched)) return -WD_EINVAL; + ret = wd_get_epoll_en("WD_RSA_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_rsa_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_rsa_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } ret = wd_init_sched(&wd_rsa_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } #ifdef WD_STATIC_DRV wd_rsa_set_static_drv(); @@ -161,10 +163,8 @@ int wd_rsa_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_rsa_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_rsa_msg)); - if (ret < 0) { - WD_ERR("failed to initialize async req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } /* initialize ctx related resources in specific driver */ priv = calloc(1, wd_rsa_setting.driver->drv_ctx_size); @@ -296,6 +296,12 @@ static int rsa_recv_sync(handle_t ctx, struct wd_rsa_msg *msg) int ret; do { + if (wd_rsa_setting.config.epoll_en) { + ret = wd_ctx_wait(ctx, POLL_TIME); + if (ret < 0) + WD_ERR("wd ctx wait timeout(%d)!\n", ret); + } + ret = wd_rsa_setting.driver->recv(ctx, msg); if (ret == -WD_EAGAIN) { if (rx_cnt++ >= RSA_RECV_MAX_CNT) { diff --git a/wd_sched.c b/wd_sched.c index 9b1998c..dfd390b 100644 --- a/wd_sched.c +++ b/wd_sched.c @@ -213,7 +213,7 @@ static int session_sched_poll_policy(handle_t sched_ctx, } if (ctx->numa_num > NUMA_NUM_NODES) { - WD_ERR("invalid: ctx's numa number is %d!\n", ctx->numa_num); + WD_ERR("invalid: ctx's numa number is %u!\n", ctx->numa_num); return -WD_EINVAL; } diff --git a/wd_util.c b/wd_util.c index 0638893..11d436d 100644 --- a/wd_util.c +++ b/wd_util.c @@ -85,8 +85,10 @@ int wd_init_ctx_config(struct wd_ctx_config_internal *in, } ctxs = calloc(1, cfg->ctx_num * sizeof(struct wd_ctx_internal)); - if (!ctxs) + if (!ctxs) { + WD_ERR("failed to alloc memory for internal ctxs!\n"); return -WD_ENOMEM; + } for (i = 0; i < cfg->ctx_num; i++) { if (!cfg->ctxs[i].ctx) { @@ -115,8 +117,10 @@ int wd_init_ctx_config(struct wd_ctx_config_internal *in, int wd_init_sched(struct wd_sched *in, struct wd_sched *from) { if (!from->name || !from->sched_init || - !from->pick_next_ctx || !from->poll_policy) + !from->pick_next_ctx || !from->poll_policy) { + WD_ERR("invalid: member of wd_sched is NULL!\n"); return -WD_EINVAL; + } in->h_sched_ctx = from->h_sched_ctx; in->name = strdup(from->name); @@ -170,13 +174,16 @@ void wd_memset_zero(void *data, __u32 size) static int init_msg_pool(struct msg_pool *pool, __u32 msg_num, __u32 msg_size) { pool->msgs = calloc(1, msg_num * msg_size); - if (!pool->msgs) + if (!pool->msgs) { + WD_ERR("failed to alloc memory for msgs arrary of msg pool!\n"); return -WD_ENOMEM; + } pool->used = calloc(1, msg_num * sizeof(int)); if (!pool->used) { free(pool->msgs); pool->msgs = NULL; + WD_ERR("failed to alloc memory for used arrary of msg pool!\n"); return -WD_ENOMEM; } @@ -204,8 +211,10 @@ int wd_init_async_request_pool(struct wd_async_msg_pool *pool, __u32 pool_num, pool->pool_num = pool_num; pool->pools = calloc(1, pool->pool_num * sizeof(struct msg_pool)); - if (!pool->pools) + if (!pool->pools) { + WD_ERR("failed to alloc memory for async msg pools!\n"); return -WD_ENOMEM; + } for (i = 0; i < pool->pool_num; i++) { ret = init_msg_pool(&pool->pools[i], msg_num, msg_size); @@ -510,27 +519,33 @@ static int is_number(const char *str) return 1; } -/* 1 enable, 0 disable, others error */ -int wd_parse_async_poll_en(struct wd_env_config *config, const char *s) +static int str_to_bool(const char *s, bool *target) { int tmp; - if (!is_number(s)) { - WD_ERR("invalid: async poll en flag is %s!\n", s); + if (!is_number(s)) return -WD_EINVAL; - } tmp = strtol(s, NULL, 10); - if (tmp != 0 && tmp != 1) { - WD_ERR("invalid: async poll en flag is not 0 or 1!\n"); + if (tmp != 0 && tmp != 1) return -WD_EINVAL; - } - config->enable_internal_poll = tmp; + *target = tmp; return 0; } +int wd_parse_async_poll_en(struct wd_env_config *config, const char *s) +{ + int ret; + + ret = str_to_bool(s, &config->enable_internal_poll); + if (ret) + WD_ERR("parse async poll enable flag(%s) failed!\n", s); + + return ret; +} + static int parse_num_on_numa(const char *s, int *num, int *node) { char *sep, *start, *left; @@ -1588,3 +1603,22 @@ int wd_check_ctx(struct wd_ctx_config_internal *config, __u8 mode, __u32 idx) return 0; } + +int wd_get_epoll_en(const char *var_name) +{ + bool epoll_en = false; + const char *s; + int ret; + + s = secure_getenv(var_name); + if (!s || !strlen(s)) + return 0; + + ret = str_to_bool(s, &epoll_en); + if (ret) { + WD_ERR("failed to parse %s environment variable!\n", var_name); + return ret; + } + + return epoll_en; +} -- 2.24.0

1 0

[PATCH] uadk: parse epoll flag from environment variable
by Zhiqi Song 16 Mar '22

16 Mar '22

From: Wenkai Lin <linwenkai6(a)hisilicon.com> wd_parse_epoll_en is used to parse epoll enable flag from environment variable, it's return value is stored in global variable of each process. When uadk works in synchronize mode, it will check the global variable and decide whether to use wd_ctx_wait. HPRE algorithm(ecc, rsa, dh) is also support epoll wait now. Signed-off-by: Wenkai Lin <linwenkai6(a)hisilicon.com> --- docs/wd_environment_variable | 5 +++ drv/hisi_comp.c | 5 +-- drv/hisi_hpre.c | 3 ++ drv/hisi_qm_udrv.c | 21 ++----------- drv/hisi_sec.c | 15 ++------- include/drv/wd_aead_drv.h | 2 -- include/drv/wd_cipher_drv.h | 2 -- include/drv/wd_comp_drv.h | 2 -- include/drv/wd_digest_drv.h | 2 -- include/hisi_qm_udrv.h | 4 +-- include/wd_alg_common.h | 2 ++ include/wd_util.h | 9 ++++++ wd_aead.c | 24 ++++++--------- wd_cipher.c | 24 ++++++--------- wd_comp.c | 27 ++++++++-------- wd_dh.c | 24 +++++++++------ wd_digest.c | 25 +++++++-------- wd_ecc.c | 24 +++++++++------ wd_rsa.c | 24 +++++++++------ wd_sched.c | 2 +- wd_util.c | 60 ++++++++++++++++++++++++++++-------- 21 files changed, 165 insertions(+), 141 deletions(-) diff --git a/docs/wd_environment_variable b/docs/wd_environment_variable index 3ada5fb..8ac2da7 100644 --- a/docs/wd_environment_variable +++ b/docs/wd_environment_variable @@ -47,6 +47,11 @@ WD_<alg>_ASYNC_POLL_NUM WD_<alg>_ASYNC_POLL_NUM=2@0,4@2 means to configure 2 async polling threads in node0, and 4 polling threads in node2. +WD_<alg>_EPOLL_EN + Define if wd_do_<alg>_sync enable wd_ctx_wait in WD. WD_<alg>_EPOLL_EN=1 + means enable wd_ctx_wait in WD, driver will wait to receive the package until + hardware is done with package, otherwise driver will try to receive the package + directly after the package is sent. 2. User model ============= diff --git a/drv/hisi_comp.c b/drv/hisi_comp.c index 841ae03..43c8688 100644 --- a/drv/hisi_comp.c +++ b/drv/hisi_comp.c @@ -779,6 +779,9 @@ static int hisi_zip_init(struct wd_ctx_config_internal *config, void *priv) qm_priv.sqe_size = sizeof(struct hisi_zip_sqe); qm_priv.op_type = config->ctxs[i].op_type; qm_priv.qp_mode = config->ctxs[i].ctx_mode; + /* Setting the epoll en to 0 for ASYNC ctx */ + qm_priv.epoll_en = (qm_priv.qp_mode == CTX_MODE_SYNC) ? + config->epoll_en : 0; qm_priv.idx = i; h_qp = hisi_qm_alloc_qp(&qm_priv, h_ctx); if (unlikely(!h_qp)) @@ -882,8 +885,6 @@ static int hisi_zip_comp_send(handle_t ctx, struct wd_comp_msg *msg, void *priv) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } diff --git a/drv/hisi_hpre.c b/drv/hisi_hpre.c index 018fe5b..f0ec540 100644 --- a/drv/hisi_hpre.c +++ b/drv/hisi_hpre.c @@ -465,6 +465,9 @@ static int hpre_init(struct wd_ctx_config_internal *config, void *priv, const ch for (i = 0; i < config->ctx_num; i++) { h_ctx = config->ctxs[i].ctx; qm_priv.qp_mode = config->ctxs[i].ctx_mode; + /* Setting the epoll en to 0 for ASYNC ctx */ + qm_priv.epoll_en = (qm_priv.qp_mode == CTX_MODE_SYNC) ? + config->epoll_en : 0; qm_priv.idx = i; h_qp = hisi_qm_alloc_qp(&qm_priv, h_ctx); if (!h_qp) { diff --git a/drv/hisi_qm_udrv.c b/drv/hisi_qm_udrv.c index be06570..2c0d87c 100644 --- a/drv/hisi_qm_udrv.c +++ b/drv/hisi_qm_udrv.c @@ -309,6 +309,7 @@ static int hisi_qm_setup_info(struct hisi_qp *qp, struct hisi_qm_priv *config) } q_info->qp_mode = config->qp_mode; + q_info->epoll_en = config->epoll_en; q_info->idx = config->idx; q_info->sqe_size = config->sqe_size; q_info->cqc_phase = 1; @@ -479,7 +480,7 @@ static int hisi_qm_recv_single(struct hisi_qm_queue_info *q_info, void *resp) i++; } - q_info->db(q_info, QM_DBELL_CMD_CQ, i, 0); + q_info->db(q_info, QM_DBELL_CMD_CQ, i, q_info->epoll_en); /* only support one thread poll one queue, so no need protect */ q_info->cq_head_index = i; @@ -919,21 +920,3 @@ __u32 hisi_qm_get_list_size(struct wd_datalist *start_node, return lits_size; } - -void hisi_qm_enable_interrupt(handle_t ctx, __u8 enable) -{ - struct hisi_qm_queue_info *q_info; - struct hisi_qp *qp; - handle_t h_qp; - - if (!enable) - return; - - h_qp = (handle_t)wd_ctx_get_priv(ctx); - qp = (struct hisi_qp *)h_qp; - q_info = &qp->q_info; - - pthread_spin_lock(&q_info->lock); - q_info->db(q_info, QM_DBELL_CMD_CQ, q_info->cq_head_index, 1); - pthread_spin_unlock(&q_info->lock); -} diff --git a/drv/hisi_sec.c b/drv/hisi_sec.c index aa86a6b..0732cdc 100644 --- a/drv/hisi_sec.c +++ b/drv/hisi_sec.c @@ -959,8 +959,6 @@ int hisi_sec_cipher_send(handle_t ctx, struct wd_cipher_msg *msg) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } @@ -1162,8 +1160,6 @@ int hisi_sec_cipher_send_v3(handle_t ctx, struct wd_cipher_msg *msg) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } @@ -1403,8 +1399,6 @@ int hisi_sec_digest_send(handle_t ctx, struct wd_digest_msg *msg) goto put_sgl; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; put_sgl: @@ -1560,8 +1554,6 @@ int hisi_sec_digest_send_v3(handle_t ctx, struct wd_digest_msg *msg) goto put_sgl; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; put_sgl: @@ -1913,8 +1905,6 @@ int hisi_sec_aead_send(handle_t ctx, struct wd_aead_msg *msg) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } @@ -2181,8 +2171,6 @@ int hisi_sec_aead_send_v3(handle_t ctx, struct wd_aead_msg *msg) return ret; } - hisi_qm_enable_interrupt(ctx, msg->is_polled); - return 0; } @@ -2285,6 +2273,9 @@ int hisi_sec_init(struct wd_ctx_config_internal *config, void *priv) /* setting the type is 0 for sqc_type */ qm_priv.op_type = 0; qm_priv.qp_mode = config->ctxs[i].ctx_mode; + /* Setting the epoll en to 0 for ASYNC ctx */ + qm_priv.epoll_en = (qm_priv.qp_mode == CTX_MODE_SYNC) ? + config->epoll_en : 0; qm_priv.idx = i; h_qp = hisi_qm_alloc_qp(&qm_priv, h_ctx); if (!h_qp) diff --git a/include/drv/wd_aead_drv.h b/include/drv/wd_aead_drv.h index 78a5673..137e70a 100644 --- a/include/drv/wd_aead_drv.h +++ b/include/drv/wd_aead_drv.h @@ -31,8 +31,6 @@ struct wd_aead_msg { __u8 data_fmt; /* Operation result, denoted by WD error code */ __u8 result; - /* epoll flag */ - __u8 is_polled; /* in bytes */ __u32 in_bytes; diff --git a/include/drv/wd_cipher_drv.h b/include/drv/wd_cipher_drv.h index e649869..87b77d3 100644 --- a/include/drv/wd_cipher_drv.h +++ b/include/drv/wd_cipher_drv.h @@ -28,8 +28,6 @@ struct wd_cipher_msg { __u8 data_fmt; /* Operation result, denoted by WD error code */ __u8 result; - /* epoll flag */ - __u8 is_polled; /* Key bytes */ __u16 key_bytes; diff --git a/include/drv/wd_comp_drv.h b/include/drv/wd_comp_drv.h index 8146a50..73403b5 100644 --- a/include/drv/wd_comp_drv.h +++ b/include/drv/wd_comp_drv.h @@ -50,8 +50,6 @@ struct wd_comp_msg { __u32 checksum; /* Request identifier */ __u32 tag; - /* Epoll flag */ - __u8 is_polled; }; struct wd_comp_driver { diff --git a/include/drv/wd_digest_drv.h b/include/drv/wd_digest_drv.h index fdde772..6907bc5 100644 --- a/include/drv/wd_digest_drv.h +++ b/include/drv/wd_digest_drv.h @@ -27,8 +27,6 @@ struct wd_digest_msg { __u8 data_fmt; /* Operation result, denoted by WD error code */ __u8 result; - /* epoll flag */ - __u8 is_polled; /* user identifier: struct wcrypto_cb_tag */ __u64 usr_data; diff --git a/include/hisi_qm_udrv.h b/include/hisi_qm_udrv.h index 707d0e3..43f42d9 100644 --- a/include/hisi_qm_udrv.h +++ b/include/hisi_qm_udrv.h @@ -47,6 +47,7 @@ struct hisi_qm_priv { __u16 op_type; /* index of ctxs */ __u32 idx; + int epoll_en; }; struct hisi_qm_queue_info { @@ -71,6 +72,7 @@ struct hisi_qm_queue_info { bool cqc_phase; pthread_spinlock_t lock; unsigned long region_size[UACCE_QFRT_MAX]; + int epoll_en; }; struct hisi_qp { @@ -182,8 +184,6 @@ int hisi_qm_get_free_sqe_num(handle_t h_qp); __u32 hisi_qm_get_list_size(struct wd_datalist *start_node, struct wd_datalist *end_node); -void hisi_qm_enable_interrupt(handle_t ctx, __u8 enable); - #ifdef __cplusplus } #endif diff --git a/include/wd_alg_common.h b/include/wd_alg_common.h index 94336f0..0affa96 100644 --- a/include/wd_alg_common.h +++ b/include/wd_alg_common.h @@ -27,6 +27,7 @@ extern "C" { #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) #define MAX_STR_LEN 256 #define CTX_TYPE_INVALID 9999 +#define POLL_TIME 1000 enum wd_ctx_mode { CTX_MODE_SYNC = 0, @@ -74,6 +75,7 @@ struct wd_ctx_config_internal { struct wd_ctx_internal *ctxs; void *priv; int pid; + int epoll_en; }; /** diff --git a/include/wd_util.h b/include/wd_util.h index 2d3c1e4..73ba96a 100644 --- a/include/wd_util.h +++ b/include/wd_util.h @@ -314,6 +314,15 @@ int wd_set_ctx_attr(struct wd_ctx_attr *ctx_attr, */ int wd_check_ctx(struct wd_ctx_config_internal *config, __u8 mode, __u32 idx); +/** + * wd_get_epoll_en() - Get epoll enable value from environment variable. + * @var_name: Environment variable name string. + * + * Return environment variable value, if the value is not 0 or 1, + * return -WD_EINVAL instead. + */ +int wd_get_epoll_en(const char *var_name); + #ifdef __cplusplus } #endif diff --git a/wd_aead.c b/wd_aead.c index 74047b5..f1bde0a 100644 --- a/wd_aead.c +++ b/wd_aead.c @@ -21,8 +21,6 @@ #define WD_POOL_MAX_ENTRIES 1024 #define MAX_RETRY_COUNTS 200000000 -#define POLL_SIZE 70000 -#define POLL_TIME 1000 static int g_aead_mac_len[WD_DIGEST_TYPE_MAX] = { WD_DIGEST_SM3_LEN, WD_DIGEST_MD5_LEN, WD_DIGEST_SHA1_LEN, @@ -414,17 +412,19 @@ int wd_aead_init(struct wd_ctx_config *config, struct wd_sched *sched) if (ret) return ret; + ret = wd_get_epoll_en("WD_AEAD_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_aead_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_aead_setting.config, config); - if (ret) { - WD_ERR("failed to set config, ret = %d\n", ret); + if (ret) return ret; - } ret = wd_init_sched(&wd_aead_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d\n", ret); + if (ret < 0) goto out; - } /* set driver */ #ifdef WD_STATIC_DRV @@ -435,10 +435,8 @@ int wd_aead_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_aead_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_aead_msg)); - if (ret < 0) { - WD_ERR("failed to init aead aysnc request pool.\n"); + if (ret < 0) goto out_sched; - } /* init ctx related resources in specific driver */ priv = calloc(1, wd_aead_setting.driver->drv_ctx_size); @@ -525,7 +523,7 @@ static int send_recv_sync(struct wd_ctx_internal *ctx, } do { - if (msg->is_polled) { + if (wd_aead_setting.config.epoll_en) { ret = wd_ctx_wait(ctx->ctx, POLL_TIME); if (unlikely(ret < 0)) WD_ERR("wd aead ctx wait timeout(%d)!\n", ret); @@ -563,7 +561,6 @@ int wd_do_aead_sync(handle_t h_sess, struct wd_aead_req *req) memset(&msg, 0, sizeof(struct wd_aead_msg)); fill_request_msg(&msg, req, sess); - msg.is_polled = (req->in_bytes >= POLL_SIZE); req->state = 0; idx = wd_aead_setting.sched.pick_next_ctx( @@ -616,7 +613,6 @@ int wd_do_aead_async(handle_t h_sess, struct wd_aead_req *req) fill_request_msg(msg, req, sess); msg->tag = msg_id; - msg->is_polled = 0; ret = wd_aead_setting.driver->aead_send(ctx->ctx, msg); if (unlikely(ret < 0)) { diff --git a/wd_cipher.c b/wd_cipher.c index 563eece..9b7b150 100644 --- a/wd_cipher.c +++ b/wd_cipher.c @@ -22,8 +22,6 @@ #define DES_WEAK_KEY_NUM 16 #define MAX_RETRY_COUNTS 200000000 -#define POLL_SIZE 100000 -#define POLL_TIME 1000 static const unsigned char des_weak_keys[DES_WEAK_KEY_NUM][DES_KEY_SIZE] = { /* weak keys */ @@ -255,17 +253,19 @@ int wd_cipher_init(struct wd_ctx_config *config, struct wd_sched *sched) if (ret) return ret; + ret = wd_get_epoll_en("WD_CIPHER_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_cipher_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_cipher_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } ret = wd_init_sched(&wd_cipher_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } #ifdef WD_STATIC_DRV /* set driver */ @@ -276,10 +276,8 @@ int wd_cipher_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_cipher_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_cipher_msg)); - if (ret < 0) { - WD_ERR("failed to init req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } /* init ctx related resources in specific driver */ priv = calloc(1, wd_cipher_setting.driver->drv_ctx_size); @@ -436,7 +434,7 @@ static int send_recv_sync(struct wd_ctx_internal *ctx, } do { - if (msg->is_polled) { + if (wd_cipher_setting.config.epoll_en) { ret = wd_ctx_wait(ctx->ctx, POLL_TIME); if (unlikely(ret < 0)) WD_ERR("wd cipher ctx wait timeout(%d)!\n", ret); @@ -476,7 +474,6 @@ int wd_do_cipher_sync(handle_t h_sess, struct wd_cipher_req *req) memset(&msg, 0, sizeof(struct wd_cipher_msg)); fill_request_msg(&msg, req, sess); - msg.is_polled = (req->in_bytes >= POLL_SIZE); req->state = 0; idx = wd_cipher_setting.sched.pick_next_ctx( @@ -526,7 +523,6 @@ int wd_do_cipher_async(handle_t h_sess, struct wd_cipher_req *req) fill_request_msg(msg, req, sess); msg->tag = msg_id; - msg->is_polled = 0; ret = wd_cipher_setting.driver->cipher_send(ctx->ctx, msg); if (unlikely(ret < 0)) { diff --git a/wd_comp.c b/wd_comp.c index 9a71dfc..1f6324c 100644 --- a/wd_comp.c +++ b/wd_comp.c @@ -22,8 +22,6 @@ #define HW_CTX_SIZE (64 * 1024) #define STREAM_CHUNK (128 * 1024) -#define POLL_SIZE 250000 -#define POLL_TIME 1000 #define swap_byte(x) \ ((((x) & 0x000000ff) << 24) | \ @@ -97,16 +95,19 @@ int wd_comp_init(struct wd_ctx_config *config, struct wd_sched *sched) return -WD_EINVAL; } + ret = wd_get_epoll_en("WD_COMP_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_comp_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_comp_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } + ret = wd_init_sched(&wd_comp_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } /* * Fix me: ctx could be passed into wd_comp_set_static_drv to help to * choose static compiled vendor driver. For dynamic vendor driver, @@ -125,10 +126,9 @@ int wd_comp_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_comp_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_comp_msg)); - if (ret < 0) { - WD_ERR("failed to init req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } + /* init ctx related resources in specific driver */ priv = calloc(1, wd_comp_setting.driver->drv_ctx_size); if (!priv) { @@ -429,7 +429,7 @@ static int wd_comp_sync_job(struct wd_comp_sess *sess, } do { - if (msg->is_polled) { + if (config->epoll_en) { ret = wd_ctx_wait(ctx->ctx, POLL_TIME); if (unlikely(ret < 0)) WD_ERR("wd ctx wait timeout, ret = %d!\n", ret); @@ -472,7 +472,6 @@ int wd_do_comp_sync(handle_t h_sess, struct wd_comp_req *req) fill_comp_msg(sess, &msg, req); msg.ctx_buf = sess->ctx_buf; - msg.is_polled = (req->src_len >= POLL_SIZE); msg.stream_mode = WD_COMP_STATELESS; ret = wd_comp_sync_job(sess, req, &msg); @@ -643,7 +642,6 @@ int wd_do_comp_strm(handle_t h_sess, struct wd_comp_req *req) /* fill true flag */ msg.req.last = req->last; msg.stream_mode = WD_COMP_STATEFUL; - msg.is_polled = (req->src_len >= POLL_SIZE); src_len = req->src_len; @@ -701,7 +699,6 @@ int wd_do_comp_async(handle_t h_sess, struct wd_comp_req *req) fill_comp_msg(sess, msg, req); msg->tag = tag; msg->stream_mode = WD_COMP_STATELESS; - msg->is_polled = 0; pthread_spin_lock(&ctx->lock); diff --git a/wd_dh.c b/wd_dh.c index c0d3e00..b9dd075 100644 --- a/wd_dh.c +++ b/wd_dh.c @@ -101,17 +101,19 @@ int wd_dh_init(struct wd_ctx_config *config, struct wd_sched *sched) if (param_check(config, sched)) return -WD_EINVAL; + ret = wd_get_epoll_en("WD_DH_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_dh_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_dh_setting.config, config); - if (ret) { - WD_ERR("failed to initialize ctx config, ret = %d!\n", ret); + if (ret) return ret; - } ret = wd_init_sched(&wd_dh_setting.sched, sched); - if (ret) { - WD_ERR("failed to initialize sched, ret = %d!\n", ret); + if (ret) goto out; - } #ifdef WD_STATIC_DRV wd_dh_set_static_drv(); @@ -121,10 +123,8 @@ int wd_dh_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_dh_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_dh_msg)); - if (ret) { - WD_ERR("failed to initialize async req pool, ret = %d!\n", ret); + if (ret) goto out_sched; - } /* initialize ctx related resources in specific driver */ priv = calloc(1, wd_dh_setting.driver->drv_ctx_size); @@ -236,6 +236,12 @@ static int dh_recv_sync(handle_t ctx, struct wd_dh_msg *msg) int ret; do { + if (wd_dh_setting.config.epoll_en) { + ret = wd_ctx_wait(ctx, POLL_TIME); + if (ret < 0) + WD_ERR("wd ctx wait timeout(%d)!\n", ret); + } + ret = wd_dh_setting.driver->recv(ctx, msg); if (ret == -WD_EAGAIN) { if (rx_cnt++ >= DH_RECV_MAX_CNT) { diff --git a/wd_digest.c b/wd_digest.c index 0ddc074..44b86c4 100644 --- a/wd_digest.c +++ b/wd_digest.c @@ -19,8 +19,6 @@ #define DES_WEAK_KEY_NUM 4 #define MAX_RETRY_COUNTS 200000000 -#define POLL_SIZE 100000 -#define POLL_TIME 1000 static int g_digest_mac_len[WD_DIGEST_TYPE_MAX] = { WD_DIGEST_SM3_LEN, WD_DIGEST_MD5_LEN, WD_DIGEST_SHA1_LEN, @@ -28,6 +26,7 @@ static int g_digest_mac_len[WD_DIGEST_TYPE_MAX] = { WD_DIGEST_SHA384_LEN, WD_DIGEST_SHA512_LEN, WD_DIGEST_SHA512_224_LEN, WD_DIGEST_SHA512_256_LEN }; + struct wd_digest_setting { struct wd_ctx_config_internal config; struct wd_sched sched; @@ -175,17 +174,19 @@ int wd_digest_init(struct wd_ctx_config *config, struct wd_sched *sched) if (ret) return ret; + ret = wd_get_epoll_en("WD_DIGEST_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_digest_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_digest_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } ret = wd_init_sched(&wd_digest_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } /* set driver */ #ifdef WD_STATIC_DRV @@ -196,10 +197,8 @@ int wd_digest_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_digest_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_digest_msg)); - if (ret < 0) { - WD_ERR("failed to init req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } /* init ctx related resources in specific driver */ priv = calloc(1, wd_digest_setting.driver->drv_ctx_size); @@ -322,7 +321,7 @@ static int send_recv_sync(struct wd_ctx_internal *ctx, struct wd_digest_sess *ds } do { - if (msg->is_polled) { + if (wd_digest_setting.config.epoll_en) { ret = wd_ctx_wait(ctx->ctx, POLL_TIME); if (unlikely(ret < 0)) WD_ERR("wd digest ctx wait timeout(%d)!\n", ret); @@ -367,7 +366,6 @@ int wd_do_digest_sync(handle_t h_sess, struct wd_digest_req *req) memset(&msg, 0, sizeof(struct wd_digest_msg)); fill_request_msg(&msg, req, dsess); - msg.is_polled = (req->in_bytes >= POLL_SIZE); req->state = 0; idx = wd_digest_setting.sched.pick_next_ctx( @@ -420,7 +418,6 @@ int wd_do_digest_async(handle_t h_sess, struct wd_digest_req *req) fill_request_msg(msg, req, dsess); msg->tag = msg_id; - msg->is_polled = 0; ret = wd_digest_setting.driver->digest_send(ctx->ctx, msg); if (unlikely(ret < 0)) { diff --git a/wd_ecc.c b/wd_ecc.c index af62b9a..bebe2e5 100644 --- a/wd_ecc.c +++ b/wd_ecc.c @@ -155,17 +155,19 @@ int wd_ecc_init(struct wd_ctx_config *config, struct wd_sched *sched) if (init_param_check(config, sched)) return -WD_EINVAL; + ret = wd_get_epoll_en("WD_ECC_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_ecc_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_ecc_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } ret = wd_init_sched(&wd_ecc_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } #ifdef WD_STATIC_DRV wd_ecc_set_static_drv(); @@ -175,10 +177,8 @@ int wd_ecc_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_ecc_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_ecc_msg)); - if (ret < 0) { - WD_ERR("failed to initialize async req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } /* initialize ctx related resources in specific driver */ priv = calloc(1, wd_ecc_setting.driver->drv_ctx_size); @@ -1413,6 +1413,12 @@ static int ecc_send(handle_t ctx, struct wd_ecc_msg *msg) int ret; do { + if (wd_ecc_setting.config.epoll_en) { + ret = wd_ctx_wait(ctx, POLL_TIME); + if (ret < 0) + WD_ERR("wd ctx wait timeout(%d)!\n", ret); + } + ret = wd_ecc_setting.driver->send(ctx, msg); if (ret == -WD_EBUSY) { if (tx_cnt++ >= ECC_RESEND_CNT) { diff --git a/wd_rsa.c b/wd_rsa.c index 8371475..1eec345 100644 --- a/wd_rsa.c +++ b/wd_rsa.c @@ -141,17 +141,19 @@ int wd_rsa_init(struct wd_ctx_config *config, struct wd_sched *sched) if (param_check(config, sched)) return -WD_EINVAL; + ret = wd_get_epoll_en("WD_RSA_EPOLL_EN"); + if (ret < 0) + return ret; + + wd_rsa_setting.config.epoll_en = ret; + ret = wd_init_ctx_config(&wd_rsa_setting.config, config); - if (ret < 0) { - WD_ERR("failed to set config, ret = %d!\n", ret); + if (ret < 0) return ret; - } ret = wd_init_sched(&wd_rsa_setting.sched, sched); - if (ret < 0) { - WD_ERR("failed to set sched, ret = %d!\n", ret); + if (ret < 0) goto out; - } #ifdef WD_STATIC_DRV wd_rsa_set_static_drv(); @@ -161,10 +163,8 @@ int wd_rsa_init(struct wd_ctx_config *config, struct wd_sched *sched) ret = wd_init_async_request_pool(&wd_rsa_setting.pool, config->ctx_num, WD_POOL_MAX_ENTRIES, sizeof(struct wd_rsa_msg)); - if (ret < 0) { - WD_ERR("failed to initialize async req pool, ret = %d!\n", ret); + if (ret < 0) goto out_sched; - } /* initialize ctx related resources in specific driver */ priv = calloc(1, wd_rsa_setting.driver->drv_ctx_size); @@ -296,6 +296,12 @@ static int rsa_recv_sync(handle_t ctx, struct wd_rsa_msg *msg) int ret; do { + if (wd_rsa_setting.config.epoll_en) { + ret = wd_ctx_wait(ctx, POLL_TIME); + if (ret < 0) + WD_ERR("wd ctx wait timeout(%d)!\n", ret); + } + ret = wd_rsa_setting.driver->recv(ctx, msg); if (ret == -WD_EAGAIN) { if (rx_cnt++ >= RSA_RECV_MAX_CNT) { diff --git a/wd_sched.c b/wd_sched.c index 9b1998c..dfd390b 100644 --- a/wd_sched.c +++ b/wd_sched.c @@ -213,7 +213,7 @@ static int session_sched_poll_policy(handle_t sched_ctx, } if (ctx->numa_num > NUMA_NUM_NODES) { - WD_ERR("invalid: ctx's numa number is %d!\n", ctx->numa_num); + WD_ERR("invalid: ctx's numa number is %u!\n", ctx->numa_num); return -WD_EINVAL; } diff --git a/wd_util.c b/wd_util.c index 0638893..11d436d 100644 --- a/wd_util.c +++ b/wd_util.c @@ -85,8 +85,10 @@ int wd_init_ctx_config(struct wd_ctx_config_internal *in, } ctxs = calloc(1, cfg->ctx_num * sizeof(struct wd_ctx_internal)); - if (!ctxs) + if (!ctxs) { + WD_ERR("failed to alloc memory for internal ctxs!\n"); return -WD_ENOMEM; + } for (i = 0; i < cfg->ctx_num; i++) { if (!cfg->ctxs[i].ctx) { @@ -115,8 +117,10 @@ int wd_init_ctx_config(struct wd_ctx_config_internal *in, int wd_init_sched(struct wd_sched *in, struct wd_sched *from) { if (!from->name || !from->sched_init || - !from->pick_next_ctx || !from->poll_policy) + !from->pick_next_ctx || !from->poll_policy) { + WD_ERR("invalid: member of wd_sched is NULL!\n"); return -WD_EINVAL; + } in->h_sched_ctx = from->h_sched_ctx; in->name = strdup(from->name); @@ -170,13 +174,16 @@ void wd_memset_zero(void *data, __u32 size) static int init_msg_pool(struct msg_pool *pool, __u32 msg_num, __u32 msg_size) { pool->msgs = calloc(1, msg_num * msg_size); - if (!pool->msgs) + if (!pool->msgs) { + WD_ERR("failed to alloc memory for msgs arrary of msg pool!\n"); return -WD_ENOMEM; + } pool->used = calloc(1, msg_num * sizeof(int)); if (!pool->used) { free(pool->msgs); pool->msgs = NULL; + WD_ERR("failed to alloc memory for used arrary of msg pool!\n"); return -WD_ENOMEM; } @@ -204,8 +211,10 @@ int wd_init_async_request_pool(struct wd_async_msg_pool *pool, __u32 pool_num, pool->pool_num = pool_num; pool->pools = calloc(1, pool->pool_num * sizeof(struct msg_pool)); - if (!pool->pools) + if (!pool->pools) { + WD_ERR("failed to alloc memory for async msg pools!\n"); return -WD_ENOMEM; + } for (i = 0; i < pool->pool_num; i++) { ret = init_msg_pool(&pool->pools[i], msg_num, msg_size); @@ -510,27 +519,33 @@ static int is_number(const char *str) return 1; } -/* 1 enable, 0 disable, others error */ -int wd_parse_async_poll_en(struct wd_env_config *config, const char *s) +static int str_to_bool(const char *s, bool *target) { int tmp; - if (!is_number(s)) { - WD_ERR("invalid: async poll en flag is %s!\n", s); + if (!is_number(s)) return -WD_EINVAL; - } tmp = strtol(s, NULL, 10); - if (tmp != 0 && tmp != 1) { - WD_ERR("invalid: async poll en flag is not 0 or 1!\n"); + if (tmp != 0 && tmp != 1) return -WD_EINVAL; - } - config->enable_internal_poll = tmp; + *target = tmp; return 0; } +int wd_parse_async_poll_en(struct wd_env_config *config, const char *s) +{ + int ret; + + ret = str_to_bool(s, &config->enable_internal_poll); + if (ret) + WD_ERR("parse async poll enable flag(%s) failed!\n", s); + + return ret; +} + static int parse_num_on_numa(const char *s, int *num, int *node) { char *sep, *start, *left; @@ -1588,3 +1603,22 @@ int wd_check_ctx(struct wd_ctx_config_internal *config, __u8 mode, __u32 idx) return 0; } + +int wd_get_epoll_en(const char *var_name) +{ + bool epoll_en = false; + const char *s; + int ret; + + s = secure_getenv(var_name); + if (!s || !strlen(s)) + return 0; + + ret = str_to_bool(s, &epoll_en); + if (ret) { + WD_ERR("failed to parse %s environment variable!\n", var_name); + return ret; + } + + return epoll_en; +} -- 2.24.0

1 0

Fwd: [PATCH v4 00/32] KVM: s390: enable zPCI for interpretive execution
by zhangfei.gao＠foxmail.com 16 Mar '22

16 Mar '22

-------- Forwarded Message -------- Subject: [PATCH v4 00/32] KVM: s390: enable zPCI for interpretive execution Date: Mon, 14 Mar 2022 15:44:19 -0400 From: Matthew Rosato <mjrosato(a)linux.ibm.com> To: linux-s390(a)vger.kernel.org CC: kvm(a)vger.kernel.org, david(a)redhat.com, thuth(a)redhat.com, linux-kernel(a)vger.kernel.org, vneethv(a)linux.ibm.com, agordeev(a)linux.ibm.com, imbrenda(a)linux.ibm.com, will(a)kernel.org, frankja(a)linux.ibm.com, corbet(a)lwn.net, linux-doc(a)vger.kernel.org, pasic(a)linux.ibm.com, jgg(a)nvidia.com, gerald.schaefer(a)linux.ibm.com, borntraeger(a)linux.ibm.com, farman(a)linux.ibm.com, gor(a)linux.ibm.com, schnelle(a)linux.ibm.com, hca(a)linux.ibm.com, alex.williamson(a)redhat.com, freude(a)linux.ibm.com, pmorel(a)linux.ibm.com, cohuck(a)redhat.com, oberpar(a)linux.ibm.com, iommu(a)lists.linux-foundation.org, svens(a)linux.ibm.com, pbonzini(a)redhat.com Note: A few patches in this series are dependent on Baolu's IOMMU domain ops split, which is currently in the next branch of linux-iommu. This series applies on top: https://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git Enable interpretive execution of zPCI instructions + adapter interruption forwarding for s390x KVM vfio-pci. This is done by introducing a new IOMMU domain for s390x (KVM-managed), indicating via vfio that this IOMMU domain should be used instead of the default, with subsequent management of the hardware assists being handled via a new KVM ioctl for zPCI management. By allowing intepretation of zPCI instructions and firmware delivery of interrupts to guests, we can significantly reduce the frequency of guest SIE exits for zPCI. We then see additional gains by handling a hot-path instruction that can still intercept to the hypervisor (RPCIT) directly in kvm via the new IOMMU domain, whose map operations update the host DMA table with pinned guest entries over the specified range. From the perspective of guest configuration, you passthrough zPCI devices in the same manner as before, with intepretation support being used by default if available in kernel+qemu. Will reply with a link to the associated QEMU series. Changelog v3->v4: v3: https://lore.kernel.org/kvm/20220204211536.321475-1-mjrosato@linux.ibm.com/ - Significant overhaul of the userspace API. Remove all vfio device feature ioctls. Remove CONFIG_VFIO_PCI_ZDEV, this is once again always built with vfio-pci for s390; IS_ENABLED checks can instead look at CONFIG_VFIO_PCI. Most earlier patches in the series could maintain their reviews, but some needed to be removed due to required code changes. - Instead use a KVM ioctl for zPCI management. The API is very similar to the feature ioctls used in the prior series, with an additional step to create an association between an iommu domain + KVM + zPCI device. - Introduce a new iommu domain ops type for s390-iommu, to be used when KVM manages the IOMMU instead of in response to VFIO mapping ioctls - Add a iommu method for specifying the type of domain to allocate - Add a new type to vfio_iommu_type1 (KVM-owned) to trigger the allocation of the KVM-owned IOMMU domain when zPCI interpretation is requested. In this case, the KVM-owned type is specified on VFIO_SET_IOMMU. - Wire the RPCIT intercepts into the new IOMMU domain via the kernel IOMMU API - Remove a bunch of unnecessary symbol externs, make the associated functions static - Now that we keep a list of zPCI associated with a given KVM, we can do fh lookup on this list vs the list of all zPCI on the host. We only need to do a host-wide fh lookup during the initial device<->KVM association. Matthew Rosato (32): s390/sclp: detect the zPCI load/store interpretation facility s390/sclp: detect the AISII facility s390/sclp: detect the AENI facility s390/sclp: detect the AISI facility s390/airq: pass more TPI info to airq handlers s390/airq: allow for airq structure that uses an input vector s390/pci: externalize the SIC operation controls and routine s390/pci: stash associated GISA designation s390/pci: export some routines related to RPCIT processing s390/pci: stash dtsm and maxstbl s390/pci: add helper function to find device by handle s390/pci: get SHM information from list pci s390/pci: return status from zpci_refresh_trans iommu: introduce iommu_domain_alloc_type and the KVM type vfio: introduce KVM-owned IOMMU type vfio-pci/zdev: add function handle to clp base capability KVM: s390: pci: add basic kvm_zdev structure iommu/s390: add support for IOMMU_DOMAIN_KVM KVM: s390: pci: do initial setup for AEN interpretation KVM: s390: pci: enable host forwarding of Adapter Event Notifications KVM: s390: mechanism to enable guest zPCI Interpretation KVM: s390: pci: routines for (dis)associating zPCI devices with a KVM KVM: s390: pci: provide routines for enabling/disabling interpretation KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding KVM: s390: pci: provide routines for enabling/disabling IOAT assist KVM: s390: pci: handle refresh of PCI translations KVM: s390: intercept the rpcit instruction KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices vfio-pci/zdev: add DTSM to clp group capability KVM: s390: introduce CPU feature for zPCI Interpretation MAINTAINERS: additional files related kvm s390 pci passthrough MAINTAINERS: update s390 IOMMU entry Documentation/virt/kvm/api.rst | 60 +++ MAINTAINERS | 4 +- arch/s390/include/asm/airq.h | 7 +- arch/s390/include/asm/kvm_host.h | 7 + arch/s390/include/asm/kvm_pci.h | 40 ++ arch/s390/include/asm/pci.h | 12 + arch/s390/include/asm/pci_clp.h | 11 +- arch/s390/include/asm/pci_dma.h | 3 + arch/s390/include/asm/pci_insn.h | 31 +- arch/s390/include/asm/sclp.h | 4 + arch/s390/include/asm/tpi.h | 13 + arch/s390/include/uapi/asm/kvm.h | 1 + arch/s390/kvm/Makefile | 1 + arch/s390/kvm/interrupt.c | 95 +++- arch/s390/kvm/kvm-s390.c | 90 +++- arch/s390/kvm/kvm-s390.h | 10 + arch/s390/kvm/pci.c | 833 +++++++++++++++++++++++++++++++ arch/s390/kvm/pci.h | 63 +++ arch/s390/kvm/priv.c | 46 ++ arch/s390/pci/pci.c | 31 ++ arch/s390/pci/pci_clp.c | 28 +- arch/s390/pci/pci_dma.c | 7 +- arch/s390/pci/pci_insn.c | 15 +- arch/s390/pci/pci_irq.c | 48 +- drivers/iommu/Kconfig | 8 + drivers/iommu/Makefile | 1 + drivers/iommu/iommu.c | 7 + drivers/iommu/s390-iommu.c | 53 +- drivers/iommu/s390-iommu.h | 53 ++ drivers/iommu/s390-kvm-iommu.c | 469 +++++++++++++++++ drivers/s390/char/sclp_early.c | 4 + drivers/s390/cio/airq.c | 12 +- drivers/s390/cio/qdio_thinint.c | 6 +- drivers/s390/crypto/ap_bus.c | 9 +- drivers/s390/virtio/virtio_ccw.c | 6 +- drivers/vfio/pci/vfio_pci_zdev.c | 17 +- drivers/vfio/vfio_iommu_type1.c | 12 +- include/linux/iommu.h | 12 + include/uapi/linux/kvm.h | 43 ++ include/uapi/linux/vfio.h | 6 + include/uapi/linux/vfio_zdev.h | 6 + 41 files changed, 2090 insertions(+), 94 deletions(-) create mode 100644 arch/s390/include/asm/kvm_pci.h create mode 100644 arch/s390/kvm/pci.c create mode 100644 arch/s390/kvm/pci.h create mode 100644 drivers/iommu/s390-iommu.h create mode 100644 drivers/iommu/s390-kvm-iommu.c -- 2.27.0 _______________________________________________ iommu mailing list iommu(a)lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu

1 0

[PATCH] hisi-hpre: modify the return value of function
by Zhiqi Song 12 Mar '22

12 Mar '22

From: Weili Qian <qianweili(a)huawei.com> When the function executes successfully, the returned size is not used, so "WD_SUCCESS" is returned directly. Signed-off-by: Weili Qian <qianweili(a)huawei.com> --- drv/hisi_hpre.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drv/hisi_hpre.c b/drv/hisi_hpre.c index b6c80203..d0a579e6 100644 --- a/drv/hisi_hpre.c +++ b/drv/hisi_hpre.c @@ -221,8 +221,7 @@ static int fill_rsa_crt_prikey2(struct wd_rsa_prikey *prikey, *data = wd_dq->data; - return (int)(wd_dq->bsize + wd_qinv->bsize + wd_p->bsize + - wd_q->bsize + wd_dp->bsize); + return WD_SUCCESS; } static int fill_rsa_prikey1(struct wd_rsa_prikey *prikey, void **data) @@ -243,7 +242,7 @@ static int fill_rsa_prikey1(struct wd_rsa_prikey *prikey, void **data) *data = wd_d->data; - return (int)(wd_n->bsize + wd_d->bsize); + return WD_SUCCESS; } static int fill_rsa_pubkey(struct wd_rsa_pubkey *pubkey, void **data) @@ -264,7 +263,7 @@ static int fill_rsa_pubkey(struct wd_rsa_pubkey *pubkey, void **data) return ret; *data = wd_e->data; - return (int)(wd_n->bsize + wd_e->bsize); + return WD_SUCCESS; } static int fill_rsa_genkey_in(struct wd_rsa_kg_in *genkey) @@ -383,17 +382,17 @@ static int rsa_prepare_key(struct wd_rsa_msg *msg, if (req->op_type == WD_RSA_SIGN) { if (hw_msg->alg == HPRE_ALG_NC_CRT) { ret = fill_rsa_crt_prikey2((void *)msg->key, &data); - if (ret <= 0) + if (ret) return ret; } else { ret = fill_rsa_prikey1((void *)msg->key, &data); - if (ret < 0) + if (ret) return ret; hw_msg->alg = HPRE_ALG_NC_NCRT; } } else if (req->op_type == WD_RSA_VERIFY) { ret = fill_rsa_pubkey((void *)msg->key, &data); - if (ret < 0) + if (ret) return ret; hw_msg->alg = HPRE_ALG_NC_NCRT; } else if (req->op_type == WD_RSA_GENKEY) { -- 2.33.0

1 0

[PATCH 1/9] sec: unify print format
by Yang Shen 10 Mar '22

10 Mar '22

From: Kai Ye <yekai13(a)huawei.com> Unify print format with following rules: 1. failed to do sth. 2. invalid: sth is NULL. Signed-off-by: Kai Ye <yekai13(a)huawei.com> --- drv/hisi_sec.c | 20 ++++++++++---------- wd_aead.c | 12 ++++++------ wd_cipher.c | 20 ++++++++++---------- wd_digest.c | 10 +++++----- 4 files changed, 31 insertions(+), 31 deletions(-) diff --git a/drv/hisi_sec.c b/drv/hisi_sec.c index 16fcb5f..aa86a6b 100644 --- a/drv/hisi_sec.c +++ b/drv/hisi_sec.c @@ -703,7 +703,7 @@ static void parse_cipher_bd2(struct hisi_sec_sqe *sqe, done = sqe->type2.done_flag & SEC_DONE_MASK; if (done != SEC_HW_TASK_DONE || sqe->type2.error_type) { - WD_ERR("SEC BD %s fail! done=0x%x, etype=0x%x\n", "cipher", + WD_ERR("failed to parse cipher BD2! done=0x%x, etype=0x%x\n", done, sqe->type2.error_type); recv_msg->result = WD_IN_EPARA; } else { @@ -927,7 +927,7 @@ int hisi_sec_cipher_send(handle_t ctx, struct wd_cipher_msg *msg) int ret; if (!msg) { - WD_ERR("input cipher msg is NULL!\n"); + WD_ERR("invalid: input cipher msg is NULL!\n"); return -WD_EINVAL; } @@ -1130,7 +1130,7 @@ int hisi_sec_cipher_send_v3(handle_t ctx, struct wd_cipher_msg *msg) int ret; if (!msg) { - WD_ERR("input cipher msg is NULL!\n"); + WD_ERR("invalid: input cipher msg is NULL!\n"); return -WD_EINVAL; } @@ -1175,7 +1175,7 @@ static void parse_cipher_bd3(struct hisi_sec_sqe3 *sqe, done = sqe->done_flag & SEC_DONE_MASK; if (done != SEC_HW_TASK_DONE || sqe->error_type) { - WD_ERR("SEC BD3 %s fail! done=0x%x, etype=0x%x\n", "cipher", + WD_ERR("failed to parse cipher BD3! done=0x%x, etype=0x%x\n", done, sqe->error_type); recv_msg->result = WD_IN_EPARA; } else { @@ -1278,7 +1278,7 @@ static void parse_digest_bd2(struct hisi_sec_sqe *sqe, done = sqe->type2.done_flag & SEC_DONE_MASK; if (done != SEC_HW_TASK_DONE || sqe->type2.error_type) { - WD_ERR("SEC BD %s fail! done=0x%x, etype=0x%x\n", "digest", + WD_ERR("failed to parse digest BD2! done=0x%x, etype=0x%x\n", done, sqe->type2.error_type); recv_msg->result = WD_IN_EPARA; } else { @@ -1354,7 +1354,7 @@ int hisi_sec_digest_send(handle_t ctx, struct wd_digest_msg *msg) int ret; if (!msg) { - WD_ERR("input digest msg is NULL!\n"); + WD_ERR("invalid: input digest msg is NULL!\n"); return -WD_EINVAL; } @@ -1510,7 +1510,7 @@ int hisi_sec_digest_send_v3(handle_t ctx, struct wd_digest_msg *msg) int ret; if (!msg) { - WD_ERR("input digest msg is NULL!\n"); + WD_ERR("invalid: input digest msg is NULL!\n"); return -WD_EINVAL; } @@ -1578,7 +1578,7 @@ static void parse_digest_bd3(struct hisi_sec_sqe3 *sqe, done = sqe->done_flag & SEC_DONE_MASK; if (done != SEC_HW_TASK_DONE || sqe->error_type) { - WD_ERR("SEC BD3 %s fail! done=0x%x, etype=0x%x\n", "digest", + WD_ERR("failed to parse digest BD3! done=0x%x, etype=0x%x\n", done, sqe->error_type); recv_msg->result = WD_IN_EPARA; } else { @@ -1927,7 +1927,7 @@ static void parse_aead_bd2(struct hisi_sec_sqe *sqe, icv = (sqe->type2.done_flag & SEC_ICV_MASK) >> 1; if (done != SEC_HW_TASK_DONE || sqe->type2.error_type || icv == SEC_HW_ICV_ERR) { - WD_ERR("SEC BD aead fail! done=0x%x, etype=0x%x, icv=0x%x\n", + WD_ERR("failed to parse aead BD2! done=0x%x, etype=0x%x, icv=0x%x\n", done, sqe->type2.error_type, icv); recv_msg->result = WD_IN_EPARA; } else { @@ -2195,7 +2195,7 @@ static void parse_aead_bd3(struct hisi_sec_sqe3 *sqe, icv = (sqe->done_flag & SEC_ICV_MASK) >> 1; if (done != SEC_HW_TASK_DONE || sqe->error_type || icv == SEC_HW_ICV_ERR) { - WD_ERR("SEC BD3 aead fail! done=0x%x, etype=0x%x, icv=0x%x\n", + WD_ERR("failed to parse aead BD3! done=0x%x, etype=0x%x, icv=0x%x\n", done, sqe->error_type, icv); recv_msg->result = WD_IN_EPARA; } else { diff --git a/wd_aead.c b/wd_aead.c index 7df8e80..74047b5 100644 --- a/wd_aead.c +++ b/wd_aead.c @@ -63,14 +63,14 @@ static void wd_aead_set_static_drv(void) { wd_aead_setting.driver = wd_aead_get_driver(); if (!wd_aead_setting.driver) - WD_ERR("fail to get driver\n"); + WD_ERR("failed to get driver!\n"); } #else static void __attribute__((constructor)) wd_aead_open_driver(void) { wd_aead_setting.dlhandle = dlopen("libhisi_sec.so", RTLD_NOW); if (!wd_aead_setting.dlhandle) - WD_ERR("failed to open libhisi_sec.so\n"); + WD_ERR("failed to open libhisi_sec.so!\n"); } static void __attribute__((destructor)) wd_aead_close_driver(void) @@ -344,7 +344,7 @@ static int aead_param_check(struct wd_aead_sess *sess, int ret; if (unlikely(!sess || !req)) { - WD_ERR("aead input sess or req is NULL.\n"); + WD_ERR("invalid: aead input sess or req is NULL!\n"); return -WD_EINVAL; } @@ -393,7 +393,7 @@ static int aead_param_check(struct wd_aead_sess *sess, static int aead_init_check(struct wd_ctx_config *config, struct wd_sched *sched) { if (!config || !config->ctxs || !config->ctxs[0].ctx || !sched) { - WD_ERR("wd aead config or sched is NULL!\n"); + WD_ERR("invalid: wd aead config or sched is NULL!\n"); return -WD_EINVAL; } @@ -594,7 +594,7 @@ int wd_do_aead_async(handle_t h_sess, struct wd_aead_req *req) return -WD_EINVAL; if (unlikely(!req->cb)) { - WD_ERR("aead input req cb is NULL.\n"); + WD_ERR("invalid: aead input req cb is NULL!\n"); return -WD_EINVAL; } @@ -647,7 +647,7 @@ int wd_aead_poll_ctx(__u32 idx, __u32 expt, __u32 *count) int ret; if (!count) { - WD_ERR("aead poll ctx input param is NULL!\n"); + WD_ERR("invalid: aead poll ctx input param is NULL!\n"); return -WD_EINVAL; } diff --git a/wd_cipher.c b/wd_cipher.c index afd8c4d..3a9b323 100644 --- a/wd_cipher.c +++ b/wd_cipher.c @@ -75,14 +75,14 @@ static void wd_cipher_set_static_drv(void) { wd_cipher_setting.driver = wd_cipher_get_driver(); if (!wd_cipher_setting.driver) - WD_ERR("fail to get driver\n"); + WD_ERR("failed to get driver!\n"); } #else static void __attribute__((constructor)) wd_cipher_open_driver(void) { wd_cipher_setting.dlhandle = dlopen("libhisi_sec.so", RTLD_NOW); if (!wd_cipher_setting.dlhandle) - WD_ERR("fail to open libhisi_sec.so\n"); + WD_ERR("failed to open libhisi_sec.so!\n"); } static void __attribute__((destructor)) wd_cipher_close_driver(void) @@ -158,7 +158,7 @@ static int cipher_init_check(struct wd_ctx_config *config, struct wd_sched *sched) { if (!config || !config->ctxs || !config->ctxs[0].ctx || !sched) { - WD_ERR("wd cipher config or sched is NULL!\n"); + WD_ERR("invalid: wd cipher config or sched is NULL!\n"); return -WD_EINVAL; } @@ -177,7 +177,7 @@ int wd_cipher_set_key(handle_t h_sess, const __u8 *key, __u32 key_len) int ret; if (!key || !sess) { - WD_ERR("cipher set key input param err!\n"); + WD_ERR("invalid: cipher set key input param err!\n"); return -WD_EINVAL; } @@ -205,13 +205,13 @@ handle_t wd_cipher_alloc_sess(struct wd_cipher_sess_setup *setup) struct wd_cipher_sess *sess = NULL; if (unlikely(!setup)) { - WD_ERR("cipher input setup is NULL!\n"); + WD_ERR("invalid: cipher input setup is NULL!\n"); return (handle_t)0; } sess = malloc(sizeof(struct wd_cipher_sess)); if (!sess) { - WD_ERR("fail to alloc session memory!\n"); + WD_ERR("failed to alloc session memory!\n"); return (handle_t)0; } memset(sess, 0, sizeof(struct wd_cipher_sess)); @@ -235,7 +235,7 @@ void wd_cipher_free_sess(handle_t h_sess) struct wd_cipher_sess *sess = (struct wd_cipher_sess *)h_sess; if (unlikely(!sess)) { - WD_ERR("cipher input h_sess is NULL!\n"); + WD_ERR("invalid: cipher input h_sess is NULL!\n"); return; } @@ -387,12 +387,12 @@ static int wd_cipher_check_params(handle_t h_sess, int ret = 0; if (unlikely(!h_sess || !req)) { - WD_ERR("cipher input sess or req is NULL!\n"); + WD_ERR("invalid: cipher input sess or req is NULL!\n"); return -WD_EINVAL; } if (unlikely(mode == CTX_MODE_ASYNC && !req->cb)) { - WD_ERR("cipher req cb is NULL!\n"); + WD_ERR("invalid: cipher req cb is NULL!\n"); return -WD_EINVAL; } @@ -561,7 +561,7 @@ int wd_cipher_poll_ctx(__u32 idx, __u32 expt, __u32 *count) int ret; if (unlikely(!count)) { - WD_ERR("wd cipher poll ctx input param is NULL!\n"); + WD_ERR("invalid: cipher poll ctx input param is NULL!\n"); return -WD_EINVAL; } diff --git a/wd_digest.c b/wd_digest.c index fb29746..0ddc074 100644 --- a/wd_digest.c +++ b/wd_digest.c @@ -62,7 +62,7 @@ static void wd_digest_set_static_drv(void) { wd_digest_setting.driver = wd_digest_get_driver(); if (!wd_digest_setting.driver) - WD_ERR("fail to get driver\n"); + WD_ERR("failed to get driver!\n"); } #else static void __attribute__((constructor)) wd_digest_open_driver(void) @@ -70,7 +70,7 @@ static void __attribute__((constructor)) wd_digest_open_driver(void) /* Fix me: vendor driver should be put in /usr/lib/wd/ */ wd_digest_setting.dlhandle = dlopen("libhisi_sec.so", RTLD_NOW); if (!wd_digest_setting.dlhandle) - WD_ERR("fail to open libhisi_sec.so\n"); + WD_ERR("failed to open libhisi_sec.so!\n"); } static void __attribute__((destructor)) wd_digest_close_driver(void) @@ -252,7 +252,7 @@ static int digest_param_check(struct wd_digest_sess *sess, int ret; if (unlikely(!sess || !req)) { - WD_ERR("digest input sess or req is NULL.\n"); + WD_ERR("invalid: digest input sess or req is NULL!\n"); return -WD_EINVAL; } @@ -398,7 +398,7 @@ int wd_do_digest_async(handle_t h_sess, struct wd_digest_req *req) return -WD_EINVAL; if (unlikely(!req->cb)) { - WD_ERR("digest input req cb is NULL.\n"); + WD_ERR("invalid: digest input req cb is NULL!\n"); return -WD_EINVAL; } @@ -451,7 +451,7 @@ int wd_digest_poll_ctx(__u32 idx, __u32 expt, __u32 *count) int ret; if (unlikely(!count)) { - WD_ERR("digest count is NULL.\n"); + WD_ERR("invalid: digest poll ctx input param is NULL!\n"); return -WD_EINVAL; } -- 2.24.0

1 8

[PATCH] uadk: bugfix segment fault when uninitializing
by Zhiqi Song 08 Mar '22

08 Mar '22

When the initialization of each alg driver failed, the wd_<alg>_setting.priv should be set to NULL. Otherwise there will be segment fault when uninitializing the alg driver. Signed-off-by: Zhiqi Song <songzhiqi1(a)huawei.com> --- wd_aead.c | 1 + wd_cipher.c | 1 + wd_comp.c | 1 + wd_dh.c | 1 + wd_digest.c | 1 + wd_ecc.c | 1 + wd_rsa.c | 1 + 7 files changed, 7 insertions(+) diff --git a/wd_aead.c b/wd_aead.c index 7a33d4e7..74047b56 100644 --- a/wd_aead.c +++ b/wd_aead.c @@ -458,6 +458,7 @@ int wd_aead_init(struct wd_ctx_config *config, struct wd_sched *sched) out_init: free(priv); + wd_aead_setting.priv = NULL; out_priv: wd_uninit_async_request_pool(&wd_aead_setting.pool); out_sched: diff --git a/wd_cipher.c b/wd_cipher.c index 374b05e3..3a9b3234 100644 --- a/wd_cipher.c +++ b/wd_cipher.c @@ -299,6 +299,7 @@ int wd_cipher_init(struct wd_ctx_config *config, struct wd_sched *sched) out_init: free(priv); + wd_cipher_setting.priv = NULL; out_priv: wd_uninit_async_request_pool(&wd_cipher_setting.pool); out_sched: diff --git a/wd_comp.c b/wd_comp.c index eb4fa8e5..9a71dfcd 100644 --- a/wd_comp.c +++ b/wd_comp.c @@ -145,6 +145,7 @@ int wd_comp_init(struct wd_ctx_config *config, struct wd_sched *sched) out_init: free(priv); + wd_comp_setting.priv = NULL; out_priv: wd_uninit_async_request_pool(&wd_comp_setting.pool); out_sched: diff --git a/wd_dh.c b/wd_dh.c index 193a3f1b..c0d3e007 100644 --- a/wd_dh.c +++ b/wd_dh.c @@ -145,6 +145,7 @@ int wd_dh_init(struct wd_ctx_config *config, struct wd_sched *sched) out_init: free(priv); + wd_dh_setting.priv = NULL; out_priv: wd_uninit_async_request_pool(&wd_dh_setting.pool); out_sched: diff --git a/wd_digest.c b/wd_digest.c index 008ab301..17b2923e 100644 --- a/wd_digest.c +++ b/wd_digest.c @@ -216,6 +216,7 @@ int wd_digest_init(struct wd_ctx_config *config, struct wd_sched *sched) out_init: free(priv); + wd_digest_setting.priv = NULL; out_priv: wd_uninit_async_request_pool(&wd_digest_setting.pool); out_sched: diff --git a/wd_ecc.c b/wd_ecc.c index 335e953b..af62b9a9 100644 --- a/wd_ecc.c +++ b/wd_ecc.c @@ -199,6 +199,7 @@ int wd_ecc_init(struct wd_ctx_config *config, struct wd_sched *sched) out_init: free(priv); + wd_ecc_setting.priv = NULL; out_priv: wd_uninit_async_request_pool(&wd_ecc_setting.pool); out_sched: diff --git a/wd_rsa.c b/wd_rsa.c index 44de4998..83714757 100644 --- a/wd_rsa.c +++ b/wd_rsa.c @@ -185,6 +185,7 @@ int wd_rsa_init(struct wd_ctx_config *config, struct wd_sched *sched) out_init: free(priv); + wd_rsa_setting.priv = NULL; out_priv: wd_uninit_async_request_pool(&wd_rsa_setting.pool); out_sched: -- 2.33.0

1 0

[PATCH] digest: simplify the process of represent BD state
by Kai Ye 08 Mar '22

08 Mar '22

The value of 'out_bytes' can descripe the BD state. So not need to use the marco variable. The BD state is non-zero value when the msg recived successfully. Otherwise the BD state is zero. Signed-off-by: Kai Ye <yekai13(a)huawei.com> --- wd_digest.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/wd_digest.c b/wd_digest.c index 0d79817..2a65540 100644 --- a/wd_digest.c +++ b/wd_digest.c @@ -21,7 +21,6 @@ #define POLL_SIZE 100000 #define POLL_TIME 1000 -#define STREAM_MODE_STATE 1 static int g_digest_mac_len[WD_DIGEST_TYPE_MAX] = { WD_DIGEST_SM3_LEN, WD_DIGEST_MD5_LEN, WD_DIGEST_SHA1_LEN, @@ -47,11 +46,8 @@ struct wd_digest_sess { unsigned char key[MAX_HMAC_KEY_SIZE]; __u32 key_bytes; void *sched_key; - /* - * Notify the BD state, 1 is final BD or middle BD, - * 0 is normal mode or first BD, one session only supports one stream. - */ - int state; + /* Notify the BD state */ + int state; /* Total of data for stream mode */ __u64 long_data_len; }; @@ -338,8 +334,8 @@ static int send_recv_sync(struct wd_ctx_internal *ctx, struct wd_digest_sess *ds goto out; } } - if (msg->has_next && msg->result == WD_SUCCESS) - dsess->state = STREAM_MODE_STATE; + if (msg->has_next) + dsess->state = msg->out_bytes; } while (ret < 0); out: -- 2.33.0

1 0

UADK周例会
by openEuler conference 04 Mar '22

04 Mar '22

您好！ sig-AccLib SIG 邀请您参加 2022-03-09 11:00 召开的ZOOM会议(自动录制) 会议主题：UADK周例会会议内容：每周三上午11点-12点，会议链接https://linaro-org.zoom.us/j/91879279131 1、社区计划 2、进展问题讨论 3、其他议题讨论会议链接：https://us06web.zoom.us/j/85336432385?pwd=Rm1TRlYrOWJKd3hiVXRRcFNpRjg1QT09 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler sig-AccLib SIG invites you to attend the ZOOM conference(auto recording) will be held at 2022-03-09 11:00, The subject of the conference is UADK周例会, Summary: 每周三上午11点-12点，会议链接https://linaro-org.zoom.us/j/91879279131 1、社区计划 2、进展问题讨论 3、其他议题讨论 You can join the meeting at https://us06web.zoom.us/j/85336432385?pwd=Rm1TRlYrOWJKd3hiVXRRcFNpRjg1QT09. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

subscribe
by shenyang (M) 24 Feb '22

24 Feb '22

subscribe

1 0