- Acc - mailweb.openeuler.org

UADK周例会
by openEuler conference 11 Oct '22

11 Oct '22

您好！ sig-AccLib SIG 邀请您参加 2022-10-12 11:00 召开的Zoom会议会议主题：UADK周例会会议内容： zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.uadk版本节奏 2.交叉编译改进 3.自由讨论会议链接：https://us06web.zoom.us/j/85494335620?pwd=Mm81N2xRWC9DbytUdFhpTW9mR2N1UT09 会议纪要：https://etherpad.openeuler.org/p/sig-AccLib-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler sig-AccLib SIG invites you to attend the Zoom conference will be held at 2022-10-12 11:00, The subject of the conference is UADK周例会, Summary: zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.uadk版本节奏 2.交叉编译改进 3.自由讨论 You can join the meeting at https://us06web.zoom.us/j/85494335620?pwd=Mm81N2xRWC9DbytUdFhpTW9mR2N1UT09. Add topics at https://etherpad.openeuler.org/p/sig-AccLib-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

82694713254
by a5d22 11 Oct '22

11 Oct '22

1 0

[PATCH] drv/qm: fix spelling mistake
by Weili Qian 09 Oct '22

09 Oct '22

There is a spelling mistakes in branch name, fix it. Signed-off-by: Weili Qian <qianweili(a)huawei.com> --- drv/hisi_qm_udrv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drv/hisi_qm_udrv.c b/drv/hisi_qm_udrv.c index 2497f49..a15bcc6 100644 --- a/drv/hisi_qm_udrv.c +++ b/drv/hisi_qm_udrv.c @@ -352,12 +352,12 @@ static int hisi_qm_setup_info(struct hisi_qp *qp, struct hisi_qm_priv *config) ret = pthread_spin_init(&q_info->sd_lock, PTHREAD_PROCESS_SHARED); if (ret) { WD_DEV_ERR(qp->h_ctx, "failed to init qinfo sd_lock!\n"); - goto err_destory_lock; + goto err_destroy_lock; } return 0; -err_destory_lock: +err_destroy_lock: pthread_spin_destroy(&q_info->rv_lock); err_out: hisi_qm_unset_region(qp->h_ctx, q_info); -- 2.33.0

1 0

[PATCH] uadk: v1: gets queue configuration from acc driver
by Weili Qian 09 Oct '22

09 Oct '22

Get the queue depth and submission queue element size from kernel acc driver. Signed-off-by: Weili Qian <qianweili(a)huawei.com> --- v1/drv/hisi_qm_udrv.c | 73 ++++++++++++++++++++++++++++++++----------- v1/drv/hisi_qm_udrv.h | 12 ++++++- 2 files changed, 65 insertions(+), 20 deletions(-) diff --git a/v1/drv/hisi_qm_udrv.c b/v1/drv/hisi_qm_udrv.c index 54aa016..bf950da 100644 --- a/v1/drv/hisi_qm_udrv.c +++ b/v1/drv/hisi_qm_udrv.c @@ -453,15 +453,56 @@ static int qm_set_db_info(struct q_info *qinfo) return 0; } -static int qm_set_queue_info(struct wd_queue *q) +static int qm_init_queue_info(struct wd_queue *q) { struct wcrypto_paras *priv = &q->capa.priv; struct q_info *qinfo = q->qinfo; struct qm_queue_info *info = qinfo->priv; + struct hisi_qp_info qp_info; struct hisi_qp_ctx qp_ctx; + int ret; + + info->sq_tail_index = 0; + info->cq_head_index = 0; + info->cqc_phase = 1; + info->used = 0; + info->is_poll = priv->is_poll; + qp_ctx.qc_type = priv->direction; + qp_ctx.id = 0; + ret = ioctl(qinfo->fd, WD_UACCE_CMD_QM_SET_QP_CTX, &qp_ctx); + if (ret < 0) { + WD_ERR("failed to set qp type!\n"); + return ret; + } + info->sqn = qp_ctx.id; + + ret = ioctl(qinfo->fd, WD_UACCE_CMD_QM_SET_QP_INFO, &qp_info); + if (ret < 0) { + WD_ERR("failed to get qp info, use default value!\n"); + + /* The default value of sqe_size has been set in qm_set_queue_alg_info. */ + info->sq_depth = QM_Q_DEPTH; + info->cq_depth = QM_Q_DEPTH; + } else { + info->sq_depth = qp_info.sq_depth; + info->cq_depth = qp_info.cq_depth; + info->sqe_size = qp_info.sqe_size; + } + + return 0; +} + +static int qm_set_queue_info(struct wd_queue *q) +{ + struct q_info *qinfo = q->qinfo; + struct qm_queue_info *info = qinfo->priv; size_t psize; int ret; + ret = qm_init_queue_info(q); + if (ret) + return ret; + ret = qm_set_queue_regions(q); if (ret) return -EINVAL; @@ -471,11 +512,11 @@ static int qm_set_queue_info(struct wd_queue *q) goto err_with_regions; } info->cq_base = (void *)((uintptr_t)info->sq_base + - info->sqe_size * QM_Q_DEPTH); + info->sqe_size * info->sq_depth); /* Protect the virtual address of CQ to avoid being over written */ psize = qinfo->qfrs_offset[WD_UACCE_QFRT_DUS] - - info->sqe_size * QM_Q_DEPTH; + info->sqe_size * info->sq_depth; ret = mprotect(info->cq_base, psize, PROT_READ); if (ret) { WD_ERR("cqe mprotect set err!\n"); @@ -491,19 +532,11 @@ static int qm_set_queue_info(struct wd_queue *q) if (ret) goto err_with_regions; - info->sq_tail_index = 0; - info->cq_head_index = 0; - info->cqc_phase = 1; - info->used = 0; - info->is_poll = priv->is_poll; - qp_ctx.qc_type = priv->direction; - qp_ctx.id = 0; - ret = ioctl(qinfo->fd, WD_UACCE_CMD_QM_SET_QP_CTX, &qp_ctx); - if (ret < 0) { - WD_ERR("hisi qm set qc_type fail, use default!\n"); + info->req_cache = calloc(info->sq_depth, sizeof(void *)); + if (!info->req_cache) { + ret = -WD_ENOMEM; goto err_with_regions; } - info->sqn = qp_ctx.id; return 0; @@ -545,8 +578,10 @@ err_with_priv: void qm_uninit_queue(struct wd_queue *q) { struct q_info *qinfo = q->qinfo; + struct qm_queue_info *info = qinfo->priv; qm_unset_queue_regions(q); + free(info->req_cache); free(qinfo->priv); qinfo->priv = NULL; } @@ -570,7 +605,7 @@ int qm_send(struct wd_queue *q, void **req, __u32 num) wd_spinlock(&info->sd_lock); if (unlikely(__atomic_load_n(&info->used, __ATOMIC_RELAXED) > - QM_Q_DEPTH - num - 1)) { + info->sq_depth - num - 1)) { wd_unspinlock(&info->sd_lock); WD_ERR("queue is full!\n"); return -WD_EBUSY; @@ -585,7 +620,7 @@ int qm_send(struct wd_queue *q, void **req, __u32 num) return -WD_EINVAL; } - if (info->sq_tail_index == QM_Q_DEPTH - 1) + if (info->sq_tail_index == info->sq_depth - 1) info->sq_tail_index = 0; else info->sq_tail_index++; @@ -615,7 +650,7 @@ void qm_rx_from_cache(struct qm_queue_info *info, void **resp, __u32 num) resp[i] = info->req_cache[idx]; info->req_cache[idx] = NULL; - if (idx == QM_Q_DEPTH - 1) { + if (idx == info->cq_depth - 1) { info->cqc_phase = !(info->cqc_phase); idx = 0; } else { @@ -666,7 +701,7 @@ int qm_recv(struct wd_queue *q, void **resp, __u32 num) mb(); /* make sure the data is all in memory before read */ sq_head = CQE_SQ_HEAD_INDEX(cqe); - if (unlikely(sq_head >= QM_Q_DEPTH)) { + if (unlikely(sq_head >= info->sq_depth)) { wd_unspinlock(&info->rc_lock); WD_ERR("CQE_SQ_HEAD_INDEX(%u) error\n", sq_head); return -WD_EIO; @@ -686,7 +721,7 @@ int qm_recv(struct wd_queue *q, void **resp, __u32 num) resp[i] = info->req_cache[info->cq_head_index]; info->req_cache[info->cq_head_index] = NULL; - if (info->cq_head_index == QM_Q_DEPTH - 1) { + if (info->cq_head_index == info->cq_depth - 1) { info->cqc_phase = !(info->cqc_phase); info->cq_head_index = 0; } else { diff --git a/v1/drv/hisi_qm_udrv.h b/v1/drv/hisi_qm_udrv.h index 0d40d86..cc1aa33 100644 --- a/v1/drv/hisi_qm_udrv.h +++ b/v1/drv/hisi_qm_udrv.h @@ -125,6 +125,13 @@ struct hisi_qp_ctx { __u16 qc_type; }; +struct hisi_qp_info { + __u32 sqe_size; + __u16 sq_depth; + __u16 cq_depth; + __u64 reserved; +}; + struct qm_queue_info; typedef int (*qm_sqe_fill)(void *msg, @@ -147,13 +154,15 @@ struct qm_queue_info { void *ds_rx_base; __u16 sq_tail_index; __u16 cq_head_index; + __u16 sq_depth; + __u16 cq_depth; __u16 sqn; __u16 resv; bool is_poll; int cqc_phase; int used; int sqe_size; - void *req_cache[QM_Q_DEPTH]; + void **req_cache; qm_sqe_fill sqe_fill[WCRYPTO_MAX_ALG]; qm_sqe_parse sqe_parse[WCRYPTO_MAX_ALG]; hisi_qm_sqe_fill_priv sqe_fill_priv; @@ -192,5 +201,6 @@ void qm_rx_from_cache(struct qm_queue_info *info, void **resp, __u32 num); #define HISI_QM_API_VER3_BASE "hisi_qm_v3" #define WD_UACCE_CMD_QM_SET_QP_CTX _IOWR('H', 10, struct hisi_qp_ctx) +#define WD_UACCE_CMD_QM_SET_QP_INFO _IOWR('H', 11, struct hisi_qp_info) #endif -- 2.33.0

1 0

[PATCH] drv/qm: gets queue info from acc driver
by Weili Qian 09 Oct '22

09 Oct '22

Get the queue depth and submission queue element size from kernel acc driver. Signed-off-by: Weili Qian <qianweili(a)huawei.com> --- drv/hisi_qm_udrv.c | 40 ++++++++++++++++++++++++++++++---------- include/hisi_qm_udrv.h | 2 ++ 2 files changed, 32 insertions(+), 10 deletions(-) diff --git a/drv/hisi_qm_udrv.c b/drv/hisi_qm_udrv.c index 93f2eb7..2497f49 100644 --- a/drv/hisi_qm_udrv.c +++ b/drv/hisi_qm_udrv.c @@ -25,6 +25,7 @@ #define VERSION_ID_SHIFT 9 #define UACCE_CMD_QM_SET_QP_CTX _IOWR('H', 10, struct hisi_qp_ctx) +#define UACCE_CMD_QM_SET_QP_INFO _IOWR('H', 11, struct hisi_qp_info) #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) /* the max sge num in one sgl */ @@ -62,6 +63,13 @@ struct hisi_qp_ctx { __u16 qc_type; }; +struct hisi_qp_info { + __u32 sqe_size; + __u16 sq_depth; + __u16 cq_depth; + __u64 reserved; +}; + struct hisi_sge { uintptr_t buff; void *page_ctrl; @@ -151,11 +159,11 @@ static void hisi_qm_fill_sqe(const void *sqe, struct hisi_qm_queue_info *info, void *sq_base = info->sq_base; int idx; - if (tail + num < QM_Q_DEPTH) { + if (tail + num < info->sq_depth) { memcpy((void *)((uintptr_t)sq_base + tail * sqe_size), sqe, sqe_size * num); } else { - idx = QM_Q_DEPTH - tail; + idx = info->sq_depth - tail; memcpy((void *)((uintptr_t)sq_base + tail * sqe_size), sqe, sqe_size * idx); memcpy(sq_base, (void *)((uintptr_t)sqe + sqe_size * idx), @@ -243,6 +251,7 @@ static int hisi_qm_setup_db(handle_t h_ctx, struct hisi_qm_queue_info *q_info) static int his_qm_set_qp_ctx(handle_t h_ctx, struct hisi_qm_priv *config, struct hisi_qm_queue_info *q_info) { + struct hisi_qp_info qp_cfg; struct hisi_qp_ctx qp_ctx; int ret; @@ -251,12 +260,24 @@ static int his_qm_set_qp_ctx(handle_t h_ctx, struct hisi_qm_priv *config, q_info->qc_type = qp_ctx.qc_type; ret = wd_ctx_set_io_cmd(h_ctx, UACCE_CMD_QM_SET_QP_CTX, &qp_ctx); if (ret < 0) { - WD_DEV_ERR(h_ctx, "failed to set qc_type, use default value!\n"); + WD_DEV_ERR(h_ctx, "failed to set qc_type!\n"); return ret; } - q_info->sqn = qp_ctx.id; + ret = wd_ctx_set_io_cmd(h_ctx, UACCE_CMD_QM_SET_QP_INFO, &qp_cfg); + if (ret < 0) { + WD_DEV_ERR(h_ctx, "set qp info failed, use default value!\n"); + + q_info->sq_depth = QM_Q_DEPTH; + q_info->cq_depth = QM_Q_DEPTH; + q_info->sqe_size = config->sqe_size; + } else { + q_info->sq_depth = qp_cfg.sq_depth; + q_info->cq_depth = qp_cfg.cq_depth; + q_info->sqe_size = qp_cfg.sqe_size; + } + return 0; } @@ -315,9 +336,8 @@ static int hisi_qm_setup_info(struct hisi_qp *qp, struct hisi_qm_priv *config) q_info->qp_mode = config->qp_mode; q_info->epoll_en = config->epoll_en; q_info->idx = config->idx; - q_info->sqe_size = config->sqe_size; q_info->cqc_phase = 1; - q_info->cq_base = q_info->sq_base + config->sqe_size * QM_Q_DEPTH; + q_info->cq_base = q_info->sq_base + (__u64)config->sqe_size * q_info->sq_depth; /* The last 32 bits of DUS show device or qp statuses */ q_info->ds_tx_base = q_info->sq_base + q_info->region_size[UACCE_QFRT_DUS] - sizeof(uint32_t); @@ -356,7 +376,7 @@ static void hisi_qm_clear_info(struct hisi_qp *qp) static int get_free_num(struct hisi_qm_queue_info *q_info) { /* The device should reserve one buffer. */ - return (QM_Q_DEPTH - 1) - + return (q_info->sq_depth - 1) - __atomic_load_n(&q_info->used_num, __ATOMIC_RELAXED); } @@ -463,7 +483,7 @@ int hisi_qm_send(handle_t h_qp, const void *req, __u16 expect, __u16 *count) tail = q_info->sq_tail_index; hisi_qm_fill_sqe(req, q_info, tail, send_num); - tail = (tail + send_num) % QM_Q_DEPTH; + tail = (tail + send_num) % q_info->sq_depth; q_info->db(q_info, QM_DBELL_CMD_SQ, tail, 0); q_info->sq_tail_index = tail; @@ -488,7 +508,7 @@ static int hisi_qm_recv_single(struct hisi_qm_queue_info *q_info, void *resp) if (q_info->cqc_phase == CQE_PHASE(cqe)) { j = CQE_SQ_HEAD_INDEX(cqe); - if (unlikely(j >= QM_Q_DEPTH)) { + if (unlikely(j >= q_info->sq_depth)) { pthread_spin_unlock(&q_info->rv_lock); WD_DEV_ERR(qp->h_ctx, "CQE_SQ_HEAD_INDEX(%u) error!\n", j); return -WD_EIO; @@ -500,7 +520,7 @@ static int hisi_qm_recv_single(struct hisi_qm_queue_info *q_info, void *resp) return -WD_EAGAIN; } - if (i == QM_Q_DEPTH - 1) { + if (i == q_info->cq_depth - 1) { q_info->cqc_phase = !(q_info->cqc_phase); i = 0; } else { diff --git a/include/hisi_qm_udrv.h b/include/hisi_qm_udrv.h index 22dedf3..dda320d 100644 --- a/include/hisi_qm_udrv.h +++ b/include/hisi_qm_udrv.h @@ -68,6 +68,8 @@ struct hisi_qm_queue_info { __u8 qp_mode; __u16 sq_tail_index; __u16 cq_head_index; + __u16 sq_depth; + __u16 cq_depth; __u16 sqn; __u16 qc_type; __u16 used_num; -- 2.33.0

1 0

[PATCH v3 0/6] uadk - add wd_comp_init2
by Yang Shen 29 Sep '22

29 Sep '22

The current uadk initialization process is: 1.Call wd_request_ctx() to request ctxs from devices. 2.Call wd_sched_rr_alloc() to create a sched(or some other scheduler alloc function if exits). 3.Initialize the sched. 4.Call wd_<alg>_init() with ctx_config and sched. Logic is reasonable. But in practice, the step of `wd_ request_ Ctx() ` and `wd_ sched_ rr_alloc() ` are very tedious. This makes it difficult for users to use the interface. One of the main reasons for this is that uadk has made a lot of configurations in the scheduler in order to provide users with better performance. Based on this consideration, the current uadk requires the user to arrange the division of hardware resources according to the device topology during initialization. Therefore, as a high-level interface, this scheme can provide customized scheme configuration for users with deep needs. All algorithm initialization interfaces have the same input parameters and behavioral logic. The pre-processing of the wd_<alg>_init is actually the configuration of `struct wd_ctx_config` and `struct wd_sched`. Therefore, the next thing to be done is to use limited and easy-to-use input parameters to describe users' requirements on the two input parameters, ensuring that the functions of the new interface init2 are the same as those of init. For ease of description, v1 is used to refer to the existing interface, and v2 is used to refer to the layer of encapsulation. At present, at least 4 parameters are required to meet the user configuration requirements with the V1 interface function remains unchanged. @device_list: The available uacce device list. Users can get it by wd_get_accel_list(). @numa_bitmask: The bitmask provided by libnuma. Users can use this parameter to control requesting ctxs devices in the bind NUMA scenario. @ctx_nums: The requested ctx number for each numa node. Due to users may have different requirements for different types of ctx numbers, needs a two-dimensional array as input. @sched_type: Scheduling type the user wants to use. What's more, some users want uadk to provide the default value about input parameters for some performance insensitive scenes. C code has no way to. Changelog: v2->v3: - update the wd_comp_init2 parameters. v1->v2: - Update the desdescription about wd_<alg>_init in wd_design.md. Yang Shen (6): uadk - support algorithms initialization reentry protect uadk/doc - update wd_alg_init support reentrancy uadk - support return error number as pointer uadk - mv some function to header file uadk/comp - add wd_comp_init2 uadk/docs - support a simple interface for initialization Makefile.am | 4 +- docs/wd_alg_init2.md | 176 ++++++++++++++++++++++++++++ docs/wd_design.md | 5 +- include/wd.h | 54 ++++++++- include/wd_alg_common.h | 24 ++++ include/wd_comp.h | 27 +++++ include/wd_util.h | 57 +++++++++ wd.c | 97 +++++++++++++--- wd_aead.c | 33 ++++-- wd_cipher.c | 35 ++++-- wd_comp.c | 248 ++++++++++++++++++++++++++++++++++++++-- wd_dh.c | 34 ++++-- wd_digest.c | 33 ++++-- wd_ecc.c | 33 ++++-- wd_rsa.c | 33 ++++-- wd_util.c | 83 +++++++++++++- 16 files changed, 870 insertions(+), 106 deletions(-) create mode 100644 docs/wd_alg_init2.md -- 2.24.0

3 9

[PATCH v2 0/5] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 29 Sep '22

29 Sep '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit Update with v1: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (5): test/crypto: add cryptodev_uadk_autotest crypto/uadk: introduce uadk crypto driver crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms doc: Update doc for UADK crypto PMD MAINTAINERS | 6 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 54 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 77 ++ drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 36 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1161 +++++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 10 files changed, 1347 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.36.1

2 10

[PATCH v3 0/5] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 29 Sep '22

29 Sep '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patch. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes. Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update in v1, compared with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: add cryptodev_uadk_autotest MAINTAINERS | 6 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 74 ++ drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 36 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1158 +++++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 10 files changed, 1342 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.36.1

1 6

UADK双周例会
by openEuler conference 27 Sep '22

27 Sep '22

您好！ sig-AccLib SIG 邀请您参加 2022-09-28 11:00 召开的Zoom会议会议主题：UADK双周例会会议内容： zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.进展讨论。2.自由讨论。会议链接：https://us06web.zoom.us/j/87676024901?pwd=RzR2ajlKK3Y5M2lIb2hDVTQySmhyQT09 会议纪要：https://etherpad.openeuler.org/p/sig-AccLib-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler sig-AccLib SIG invites you to attend the Zoom conference will be held at 2022-09-28 11:00, The subject of the conference is UADK双周例会, Summary: zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.进展讨论。2.自由讨论。 You can join the meeting at https://us06web.zoom.us/j/87676024901?pwd=RzR2ajlKK3Y5M2lIb2hDVTQySmhyQT09. Add topics at https://etherpad.openeuler.org/p/sig-AccLib-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

acc账户通知
by system 20 Sep '22

20 Sep '22

1 0