Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. This patch adds the basic framework. [1] https://github.com/Linaro/uadk Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> --- MAINTAINERS | 6 ++ doc/guides/cryptodevs/features/uadk.ini | 33 +++++++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 53 ++++++++++ drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 36 +++++++ drivers/crypto/uadk/uadk_crypto_pmd.c | 122 ++++++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 8 files changed, 255 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map diff --git a/MAINTAINERS b/MAINTAINERS index 5472fccf61..ed00b9afd1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1064,6 +1064,12 @@ M: Kai Ji <kai.ji@intel.com> F: drivers/crypto/scheduler/ F: doc/guides/cryptodevs/scheduler.rst +HiSilicon UADK crypto +M: Zhangfei Gao <zhangfei.gao@linaro.org> +F: drivers/crypto/uadk/ +F: doc/guides/cryptodevs/uadk.rst +F: doc/guides/cryptodevs/features/uadk.ini + Intel QuickAssist M: Kai Ji <kai.ji@intel.com> F: drivers/crypto/qat/ diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini new file mode 100644 index 0000000000..df5ad40e3d --- /dev/null +++ b/doc/guides/cryptodevs/features/uadk.ini @@ -0,0 +1,33 @@ +; +; Supported features of the 'uadk' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +HW Accelerated = Y + +; +; Supported crypto algorithms of the 'uadk' crypto driver. +; +[Cipher] + +; +; Supported authentication algorithms of the 'uadk' crypto driver. +; +[Auth] + +; +; Supported AEAD algorithms of the 'uadk' crypto driver. +; +[AEAD] + +; +; Supported Asymmetric algorithms of the 'uadk' crypto driver. +; +[Asymmetric] + +; +; Supported Operating systems of the 'uadk' crypto driver. +; +[OS] +Linux = Y diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst index 39cca6dbde..cb4ce227e9 100644 --- a/doc/guides/cryptodevs/index.rst +++ b/doc/guides/cryptodevs/index.rst @@ -30,5 +30,6 @@ Crypto Device Drivers scheduler snow3g qat + uadk virtio zuc diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst new file mode 100644 index 0000000000..a170224cac --- /dev/null +++ b/doc/guides/cryptodevs/uadk.rst @@ -0,0 +1,53 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved. + Copyright 2022-2023 Linaro ltd. + +UADK Crypto Poll Mode Driver +======================================================= + +UADK crypto PMD provides poll mode driver +All cryptographic operations are using UADK crypto API. +Hardware accelerators using UADK are supposed to be supported. + + +Features +-------- + +UADK crypto PMD has support for: + + +Test steps +----------- + + .. code-block:: console + + 1. Build + cd dpdk + mkdir build + meson build (--reconfigure) + cd build + ninja + sudo ninja install + + 2. Prepare + echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages + echo 1024 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages + echo 1024 > /sys/devices/system/node/node2/hugepages/hugepages-2048kB/nr_hugepages + echo 1024 > /sys/devices/system/node/node3/hugepages/hugepages-2048kB/nr_hugepages + mkdir -p /mnt/huge_2mb + mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB + + 3. Run test app + +Dependency +------------ + +UADK crypto PMD relies on UADK library [1] + +UADK is a framework for user applications to access hardware accelerators. +UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share +the same page table between IOMMU and MMU. +As a result, user application can directly use virtual address for device dma, +which enhances the performance as well as easy usability. + +[1] https://github.com/Linaro/uadk diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build index 147b8cf633..ee5377deff 100644 --- a/drivers/crypto/meson.build +++ b/drivers/crypto/meson.build @@ -18,6 +18,7 @@ drivers = [ 'octeontx', 'openssl', 'scheduler', + 'uadk', 'virtio', ] diff --git a/drivers/crypto/uadk/meson.build b/drivers/crypto/uadk/meson.build new file mode 100644 index 0000000000..dda6c6b257 --- /dev/null +++ b/drivers/crypto/uadk/meson.build @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved. +# Copyright 2022-2023 Linaro ltd. + +if not is_linux + build = false + reason = 'only supported on Linux' + subdir_done() +endif + +if arch_subdir != 'arm' or not dpdk_conf.get('RTE_ARCH_64') + build = false + reason = 'only supported on aarch64' + subdir_done() +endif + +sources = files( + 'uadk_crypto_pmd.c', +) + +deps += 'bus_vdev' +dep = cc.find_library('libwd_crypto', required: false) +if not dep.found() + build = false + reason = 'missing dependency, "libwd_crypto"' +else + ext_deps += dep +endif + +dep = cc.find_library('libwd', required: false) +if not dep.found() + build = false + reason = 'missing dependency, "libwd"' +else + ext_deps += dep +endif diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c new file mode 100644 index 0000000000..ec9bb174c7 --- /dev/null +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright 2022-2023 Huawei Technologies Co.,Ltd. All rights reserved. + * Copyright 2022-2023 Linaro ltd. + */ + +#include <bus_vdev_driver.h> +#include <cryptodev_pmd.h> +#include <rte_bus_vdev.h> +#include <rte_comp.h> +#include <stdlib.h> +#include <uadk/wd_cipher.h> +#include <uadk/wd_digest.h> +#include <uadk/wd_sched.h> + +enum uadk_crypto_version { + UADK_CRYPTO_V2, + UADK_CRYPTO_V3, +}; + +struct uadk_crypto_priv { + enum uadk_crypto_version version; +} __rte_cache_aligned; + +static uint8_t uadk_cryptodev_driver_id; + +RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO); + +#define UADK_LOG(level, fmt, ...) \ + rte_log(RTE_LOG_ ## level, uadk_crypto_logtype, \ + "%s() line %u: " fmt "\n", __func__, __LINE__, \ + ## __VA_ARGS__) + +static struct rte_cryptodev_ops uadk_crypto_pmd_ops = { + .dev_configure = NULL, + .dev_start = NULL, + .dev_stop = NULL, + .dev_close = NULL, + .stats_get = NULL, + .stats_reset = NULL, + .dev_infos_get = NULL, + .queue_pair_setup = NULL, + .queue_pair_release = NULL, + .sym_session_get_size = NULL, + .sym_session_configure = NULL, + .sym_session_clear = NULL, +}; + +static int +uadk_cryptodev_probe(struct rte_vdev_device *vdev) +{ + struct rte_cryptodev_pmd_init_params init_params = { + .name = "", + .private_data_size = sizeof(struct uadk_crypto_priv), + .max_nb_queue_pairs = + RTE_CRYPTODEV_PMD_DEFAULT_MAX_NB_QUEUE_PAIRS, + }; + enum uadk_crypto_version version = UADK_CRYPTO_V2; + struct uadk_crypto_priv *priv; + struct rte_cryptodev *dev; + struct uacce_dev *udev; + const char *name; + + udev = wd_get_accel_dev("cipher"); + if (!udev) + return -ENODEV; + + if (!strcmp(udev->api, "hisi_qm_v2")) + version = UADK_CRYPTO_V2; + + free(udev); + + name = rte_vdev_device_name(vdev); + if (name == NULL) + return -EINVAL; + + dev = rte_cryptodev_pmd_create(name, &vdev->device, &init_params); + if (dev == NULL) { + UADK_LOG(ERR, "driver %s: create failed", init_params.name); + return -ENODEV; + } + + dev->dev_ops = &uadk_crypto_pmd_ops; + dev->driver_id = uadk_cryptodev_driver_id; + dev->dequeue_burst = NULL; + dev->enqueue_burst = NULL; + dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED; + priv = dev->data->dev_private; + priv->version = version; + + rte_cryptodev_pmd_probing_finish(dev); + + return 0; +} + +static int +uadk_cryptodev_remove(struct rte_vdev_device *vdev) +{ + struct rte_cryptodev *cryptodev; + const char *name; + + name = rte_vdev_device_name(vdev); + if (name == NULL) + return -EINVAL; + + cryptodev = rte_cryptodev_pmd_get_named_dev(name); + if (cryptodev == NULL) + return -ENODEV; + + return rte_cryptodev_pmd_destroy(cryptodev); +} + +static struct rte_vdev_driver uadk_crypto_pmd = { + .probe = uadk_cryptodev_probe, + .remove = uadk_cryptodev_remove, +}; + +static struct cryptodev_driver uadk_crypto_drv; + +#define UADK_CRYPTO_DRIVER_NAME crypto_uadk +RTE_PMD_REGISTER_VDEV(UADK_CRYPTO_DRIVER_NAME, uadk_crypto_pmd); +RTE_PMD_REGISTER_CRYPTO_DRIVER(uadk_crypto_drv, uadk_crypto_pmd.driver, + uadk_cryptodev_driver_id); diff --git a/drivers/crypto/uadk/version.map b/drivers/crypto/uadk/version.map new file mode 100644 index 0000000000..c2e0723b4c --- /dev/null +++ b/drivers/crypto/uadk/version.map @@ -0,0 +1,3 @@ +DPDK_22 { + local: *; +}; -- 2.36.1

This commit adds the enqueue and dequeue operations. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> --- drivers/crypto/uadk/uadk_crypto_pmd.c | 53 ++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c index 1d1a4b2897..051d6726b0 100644 --- a/drivers/crypto/uadk/uadk_crypto_pmd.c +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c @@ -240,6 +240,55 @@ static struct rte_cryptodev_ops uadk_crypto_pmd_ops = { .sym_session_clear = NULL, }; +static uint16_t +uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops, + uint16_t nb_ops) +{ + struct uadk_qp *qp = queue_pair; + struct rte_crypto_op *op; + uint16_t enqd = 0; + int i, ret; + + for (i = 0; i < nb_ops; i++) { + op = ops[i]; + op->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED; + + if (op->status == RTE_CRYPTO_OP_STATUS_NOT_PROCESSED) + op->status = RTE_CRYPTO_OP_STATUS_SUCCESS; + + if (op->status != RTE_CRYPTO_OP_STATUS_ERROR) { + ret = rte_ring_enqueue(qp->processed_pkts, (void *)op); + if (ret < 0) + goto enqueue_err; + qp->qp_stats.enqueued_count++; + enqd++; + } else { + /* increment count if failed to enqueue op */ + qp->qp_stats.enqueue_err_count++; + } + } + + return enqd; + +enqueue_err: + qp->qp_stats.enqueue_err_count++; + return enqd; +} + +static uint16_t +uadk_crypto_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops, + uint16_t nb_ops) +{ + struct uadk_qp *qp = queue_pair; + unsigned int nb_dequeued; + + nb_dequeued = rte_ring_dequeue_burst(qp->processed_pkts, + (void **)ops, nb_ops, NULL); + qp->qp_stats.dequeued_count += nb_dequeued; + + return nb_dequeued; +} + static int uadk_cryptodev_probe(struct rte_vdev_device *vdev) { @@ -276,8 +325,8 @@ uadk_cryptodev_probe(struct rte_vdev_device *vdev) dev->dev_ops = &uadk_crypto_pmd_ops; dev->driver_id = uadk_cryptodev_driver_id; - dev->dequeue_burst = NULL; - dev->enqueue_burst = NULL; + dev->dequeue_burst = uadk_crypto_dequeue_burst; + dev->enqueue_burst = uadk_crypto_enqueue_burst; dev->feature_flags = RTE_CRYPTODEV_FF_HW_ACCELERATED; priv = dev->data->dev_private; priv->version = version; -- 2.36.1

Hash algorithms: * ``RTE_CRYPTO_AUTH_MD5`` * ``RTE_CRYPTO_AUTH_MD5_HMAC`` * ``RTE_CRYPTO_AUTH_SHA1`` * ``RTE_CRYPTO_AUTH_SHA1_HMAC`` * ``RTE_CRYPTO_AUTH_SHA224`` * ``RTE_CRYPTO_AUTH_SHA224_HMAC`` * ``RTE_CRYPTO_AUTH_SHA256`` * ``RTE_CRYPTO_AUTH_SHA256_HMAC`` * ``RTE_CRYPTO_AUTH_SHA384`` * ``RTE_CRYPTO_AUTH_SHA384_HMAC`` * ``RTE_CRYPTO_AUTH_SHA512`` * ``RTE_CRYPTO_AUTH_SHA512_HMAC`` Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> --- doc/guides/cryptodevs/features/uadk.ini | 12 + doc/guides/cryptodevs/uadk.rst | 15 + drivers/crypto/uadk/uadk_crypto_pmd.c | 459 ++++++++++++++++++++++++ 3 files changed, 486 insertions(+) diff --git a/doc/guides/cryptodevs/features/uadk.ini b/doc/guides/cryptodevs/features/uadk.ini index 005e08ac8d..2e8a37a2b3 100644 --- a/doc/guides/cryptodevs/features/uadk.ini +++ b/doc/guides/cryptodevs/features/uadk.ini @@ -25,6 +25,18 @@ DES CBC = Y ; Supported authentication algorithms of the 'uadk' crypto driver. ; [Auth] +MD5 = Y +MD5 HMAC = Y +SHA1 = Y +SHA1 HMAC = Y +SHA224 = Y +SHA224 HMAC = Y +SHA256 = Y +SHA256 HMAC = Y +SHA384 = Y +SHA384 HMAC = Y +SHA512 = Y +SHA512 HMAC = Y ; ; Supported AEAD algorithms of the 'uadk' crypto driver. diff --git a/doc/guides/cryptodevs/uadk.rst b/doc/guides/cryptodevs/uadk.rst index 054f5103cc..23ed70e82b 100644 --- a/doc/guides/cryptodevs/uadk.rst +++ b/doc/guides/cryptodevs/uadk.rst @@ -22,6 +22,21 @@ Cipher algorithms: * ``RTE_CRYPTO_CIPHER_AES_XTS`` * ``RTE_CRYPTO_CIPHER_DES_CBC`` +Hash algorithms: + +* ``RTE_CRYPTO_AUTH_MD5`` +* ``RTE_CRYPTO_AUTH_MD5_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA1`` +* ``RTE_CRYPTO_AUTH_SHA1_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA224`` +* ``RTE_CRYPTO_AUTH_SHA224_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA256`` +* ``RTE_CRYPTO_AUTH_SHA256_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA384`` +* ``RTE_CRYPTO_AUTH_SHA384_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA512`` +* ``RTE_CRYPTO_AUTH_SHA512_HMAC`` + Test steps ----------- diff --git a/drivers/crypto/uadk/uadk_crypto_pmd.c b/drivers/crypto/uadk/uadk_crypto_pmd.c index 8e2e3b7877..a166efa36c 100644 --- a/drivers/crypto/uadk/uadk_crypto_pmd.c +++ b/drivers/crypto/uadk/uadk_crypto_pmd.c @@ -33,11 +33,15 @@ struct uadk_qp { enum uadk_chain_order { UADK_CHAIN_ONLY_CIPHER, + UADK_CHAIN_ONLY_AUTH, + UADK_CHAIN_CIPHER_AUTH, + UADK_CHAIN_AUTH_CIPHER, UADK_CHAIN_NOT_SUPPORTED }; struct uadk_crypto_session { handle_t handle_cipher; + handle_t handle_digest; enum uadk_chain_order chain_order; /* IV parameters */ @@ -51,6 +55,13 @@ struct uadk_crypto_session { enum rte_crypto_cipher_operation direction; struct wd_cipher_req req; } cipher; + + /* Authentication Parameters */ + struct { + struct wd_digest_req req; + enum rte_crypto_auth_operation operation; + uint16_t digest_length; + } auth; } __rte_cache_aligned; enum uadk_crypto_version { @@ -60,6 +71,7 @@ enum uadk_crypto_version { struct uadk_crypto_priv { bool env_cipher_init; + bool env_auth_init; enum uadk_crypto_version version; } __rte_cache_aligned; @@ -73,6 +85,252 @@ RTE_LOG_REGISTER_DEFAULT(uadk_crypto_logtype, INFO); ## __VA_ARGS__) static const struct rte_cryptodev_capabilities uadk_crypto_v2_capabilities[] = { + { /* MD5 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_MD5_HMAC, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 16, + .max = 16, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* MD5 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_MD5, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 16, + .max = 16, + .increment = 0 + }, + }, } + }, } + }, + { /* SHA1 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA1_HMAC, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 20, + .max = 20, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA1 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA1, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 20, + .max = 20, + .increment = 0 + }, + }, } + }, } + }, + { /* SHA224 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA224_HMAC, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 28, + .max = 28, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA224 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA224, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 28, + .max = 28, + .increment = 0 + }, + }, } + }, } + }, + { /* SHA256 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA256_HMAC, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 32, + .max = 32, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA256 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA256, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 32, + .max = 32, + .increment = 0 + }, + }, } + }, } + }, + { /* SHA384 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA384_HMAC, + .block_size = 128, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 48, + .max = 48, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA384 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA384, + .block_size = 64, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 48, + .max = 48, + .increment = 0 + }, + }, } + }, } + }, + { /* SHA512 HMAC */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA512_HMAC, + .block_size = 128, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 64, + .max = 64, + .increment = 0 + }, + .iv_size = { 0 } + }, } + }, } + }, + { /* SHA512 */ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, + {.sym = { + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, + {.auth = { + .algo = RTE_CRYPTO_AUTH_SHA512, + .block_size = 128, + .key_size = { + .min = 0, + .max = 0, + .increment = 0 + }, + .digest_size = { + .min = 64, + .max = 64, + .increment = 0 + }, + }, } + }, } + }, { /* AES ECB */ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, {.sym = { @@ -189,6 +447,11 @@ uadk_crypto_pmd_close(struct rte_cryptodev *dev) priv->env_cipher_init = false; } + if (priv->env_auth_init) { + wd_digest_env_uninit(); + priv->env_auth_init = false; + } + return 0; } @@ -347,9 +610,19 @@ uadk_get_chain_order(const struct rte_crypto_sym_xform *xform) enum uadk_chain_order res = UADK_CHAIN_NOT_SUPPORTED; if (xform != NULL) { + if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) { + if (xform->next == NULL) + res = UADK_CHAIN_ONLY_AUTH; + else if (xform->next->type == + RTE_CRYPTO_SYM_XFORM_CIPHER) + res = UADK_CHAIN_AUTH_CIPHER; + } + if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) { if (xform->next == NULL) res = UADK_CHAIN_ONLY_CIPHER; + else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) + res = UADK_CHAIN_CIPHER_AUTH; } } @@ -436,12 +709,119 @@ uadk_set_session_cipher_parameters(struct rte_cryptodev *dev, return ret; } +/* Set session auth parameters */ +static int +uadk_set_session_auth_parameters(struct rte_cryptodev *dev, + struct uadk_crypto_session *sess, + struct rte_crypto_sym_xform *xform) +{ + struct uadk_crypto_priv *priv = dev->data->dev_private; + struct wd_digest_sess_setup setup = {0}; + struct sched_params params = {0}; + int ret; + + if (!priv->env_auth_init) { + ret = wd_digest_env_init(NULL); + if (ret < 0) + return -EINVAL; + priv->env_auth_init = true; + } + + sess->auth.operation = xform->auth.op; + sess->auth.digest_length = xform->auth.digest_length; + + switch (xform->auth.algo) { + case RTE_CRYPTO_AUTH_MD5: + case RTE_CRYPTO_AUTH_MD5_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_MD5) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_MD5; + sess->auth.req.out_buf_bytes = 16; + sess->auth.req.out_bytes = 16; + break; + case RTE_CRYPTO_AUTH_SHA1: + case RTE_CRYPTO_AUTH_SHA1_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA1) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA1; + sess->auth.req.out_buf_bytes = 20; + sess->auth.req.out_bytes = 20; + break; + case RTE_CRYPTO_AUTH_SHA224: + case RTE_CRYPTO_AUTH_SHA224_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA224) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA224; + sess->auth.req.out_buf_bytes = 28; + sess->auth.req.out_bytes = 28; + break; + case RTE_CRYPTO_AUTH_SHA256: + case RTE_CRYPTO_AUTH_SHA256_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA256) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA256; + sess->auth.req.out_buf_bytes = 32; + sess->auth.req.out_bytes = 32; + break; + case RTE_CRYPTO_AUTH_SHA384: + case RTE_CRYPTO_AUTH_SHA384_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA384) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA384; + sess->auth.req.out_buf_bytes = 48; + sess->auth.req.out_bytes = 48; + break; + case RTE_CRYPTO_AUTH_SHA512: + case RTE_CRYPTO_AUTH_SHA512_HMAC: + setup.mode = (xform->auth.algo == RTE_CRYPTO_AUTH_SHA512) ? + WD_DIGEST_NORMAL : WD_DIGEST_HMAC; + setup.alg = WD_DIGEST_SHA512; + sess->auth.req.out_buf_bytes = 64; + sess->auth.req.out_bytes = 64; + break; + default: + ret = -ENOTSUP; + goto env_uninit; + } + + params.numa_id = -1; /* choose nearby numa node */ + setup.sched_param = ¶ms; + sess->handle_digest = wd_digest_alloc_sess(&setup); + if (!sess->handle_digest) { + UADK_LOG(ERR, "uadk failed to alloc session!\n"); + ret = -EINVAL; + goto env_uninit; + } + + /* if mode is HMAC, should set key */ + if (setup.mode == WD_DIGEST_HMAC) { + ret = wd_digest_set_key(sess->handle_digest, + xform->auth.key.data, + xform->auth.key.length); + if (ret) { + UADK_LOG(ERR, "uadk failed to alloc session!\n"); + wd_digest_free_sess(sess->handle_digest); + sess->handle_digest = 0; + ret = -EINVAL; + goto env_uninit; + } + } + + return 0; + +env_uninit: + wd_digest_env_uninit(); + priv->env_auth_init = false; + return ret; +} + static int uadk_crypto_sym_session_configure(struct rte_cryptodev *dev, struct rte_crypto_sym_xform *xform, struct rte_cryptodev_sym_session *session) { struct rte_crypto_sym_xform *cipher_xform = NULL; + struct rte_crypto_sym_xform *auth_xform = NULL; struct uadk_crypto_session *sess = CRYPTODEV_GET_SYM_SESS_PRIV(session); int ret; @@ -455,6 +835,17 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev, case UADK_CHAIN_ONLY_CIPHER: cipher_xform = xform; break; + case UADK_CHAIN_ONLY_AUTH: + auth_xform = xform; + break; + case UADK_CHAIN_CIPHER_AUTH: + cipher_xform = xform; + auth_xform = xform->next; + break; + case UADK_CHAIN_AUTH_CIPHER: + auth_xform = xform; + cipher_xform = xform->next; + break; default: return -ENOTSUP; } @@ -468,6 +859,15 @@ uadk_crypto_sym_session_configure(struct rte_cryptodev *dev, } } + if (auth_xform) { + ret = uadk_set_session_auth_parameters(dev, sess, auth_xform); + if (ret != 0) { + UADK_LOG(ERR, + "Invalid/unsupported auth parameters"); + return ret; + } + } + return 0; } @@ -486,6 +886,11 @@ uadk_crypto_sym_session_clear(struct rte_cryptodev *dev __rte_unused, wd_cipher_free_sess(sess->handle_cipher); sess->handle_cipher = 0; } + + if (sess->handle_digest) { + wd_digest_free_sess(sess->handle_digest); + sess->handle_digest = 0; + } } static struct rte_cryptodev_ops uadk_crypto_pmd_ops = { @@ -539,6 +944,49 @@ uadk_process_cipher_op(struct rte_crypto_op *op, op->status = RTE_COMP_OP_STATUS_ERROR; } +static void +uadk_process_auth_op(struct uadk_qp *qp, struct rte_crypto_op *op, + struct uadk_crypto_session *sess, + struct rte_mbuf *msrc, struct rte_mbuf *mdst) +{ + uint32_t srclen = op->sym->auth.data.length; + uint32_t off = op->sym->auth.data.offset; + uint8_t *dst = qp->temp_digest; + int ret; + + if (!sess) { + op->status = RTE_COMP_OP_STATUS_INVALID_ARGS; + return; + } + + sess->auth.req.in = rte_pktmbuf_mtod_offset(msrc, uint8_t *, off); + sess->auth.req.in_bytes = srclen; + sess->auth.req.out = dst; + + do { + ret = wd_do_digest_sync(sess->handle_digest, &sess->auth.req); + } while (ret == -WD_EBUSY); + + if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) { + if (memcmp(dst, op->sym->auth.digest.data, + sess->auth.digest_length) != 0) { + op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED; + } + } else { + uint8_t *auth_dst; + + auth_dst = op->sym->auth.digest.data; + if (auth_dst == NULL) + auth_dst = rte_pktmbuf_mtod_offset(mdst, uint8_t *, + op->sym->auth.data.offset + + op->sym->auth.data.length); + memcpy(auth_dst, dst, sess->auth.digest_length); + } + + if (ret) + op->status = RTE_COMP_OP_STATUS_ERROR; +} + static uint16_t uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops, uint16_t nb_ops) @@ -566,6 +1014,17 @@ uadk_crypto_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops, case UADK_CHAIN_ONLY_CIPHER: uadk_process_cipher_op(op, sess, msrc, mdst); break; + case UADK_CHAIN_ONLY_AUTH: + uadk_process_auth_op(qp, op, sess, msrc, mdst); + break; + case UADK_CHAIN_CIPHER_AUTH: + uadk_process_cipher_op(op, sess, msrc, mdst); + uadk_process_auth_op(qp, op, sess, mdst, mdst); + break; + case UADK_CHAIN_AUTH_CIPHER: + uadk_process_auth_op(qp, op, sess, msrc, mdst); + uadk_process_cipher_op(op, sess, msrc, mdst); + break; default: op->status = RTE_CRYPTO_OP_STATUS_ERROR; break; -- 2.36.1