Currently, x86, Riscv, Loongarch use the Generic Entry which makes maintainers' work easier and codes more elegant. arm64 has already successfully switched to the Generic IRQ Entry in commit b3cf07851b6c ("arm64: entry: Switch to generic IRQ entry"), it is time to completely convert arm64 to Generic Entry. The goal is to bring arm64 in line with other architectures that already use the generic entry infrastructure, reducing duplicated code and making it easier to share future changes in entry/exit paths, such as "Syscall User Dispatch". This patch set is rebased on v6.18-rc6. The performance benchmarks from perf bench basic syscall on real hardware are below: | Metric | W/O Generic Framework | With Generic Framework | Change | | ---------- | --------------------- | ---------------------- | ------ | | Total time | 2.813 [sec] | 2.930 [sec] | ↑4% | | usecs/op | 0.281349 | 0.293006 | ↑4% | | ops/sec | 3,554,299 | 3,412,894 | ↓4% | Compared to earlier with arch specific handling, the performance decreased by approximately 4%. It was tested ok with following test cases on QEMU virt platform: - Perf tests. - Different `dynamic preempt` mode switch. - Pseudo NMI tests. - Stress-ng CPU stress test. - Hackbench stress test. - MTE test case in Documentation/arch/arm64/memory-tagging-extension.rst and all test cases in tools/testing/selftests/arm64/mte/*. - "sud" selftest testcase. - get_syscall_info, peeksiginfo in tools/testing/selftests/ptrace. - Strace tests. The test QEMU configuration is as follows: qemu-system-aarch64 \ -M virt,gic-version=3,virtualization=on,mte=on \ cpu max,pauth-impdef=on \ kernel Image \ smp 8,sockets=1,cores=4,threads=2 \ m 512m \ nographic \ no-reboot \ device virtio-rng-pci \ append "root=/dev/vda rw console=ttyAMA0 kgdboc=ttyAMA0,115200 \ earlycon preempt=voluntary irqchip.gicv3_pseudo_nmi=1" \ drive if=none,file=images/rootfs.ext4,format=raw,id=hd0 \ device virtio-blk-device,drive=hd0 \ Changes in v8: - Rename "report_syscall_enter()" to "report_syscall_entry()". - Add ptrace_save_reg() to avoid duplication. - Remove unused _TIF_WORK_MASK in a standalone patch. - Align syscall_trace_enter() return value with the generic version. - Use "scno" instead of regs->syscallno in el0_svc_common(). - Move rseq_syscall() ahead in a standalone patch to clarify it clearly. - Rename "syscall_trace_exit()" to "syscall_exit_work()". - Keep the goto in el0_svc_common(). - No argument was passed to __secure_computing() and check -1 not -1L. - Remove "Add has_syscall_work() helper" patch. - Move "Add syscall_exit_to_user_mode_prepare() helper" patch later. - Add miss header for asm/entry-common.h. - Update the implementation of arch_syscall_is_vdso_sigreturn(). - Add "ARCH_SYSCALL_WORK_EXIT" to be defined as "SECCOMP | SYSCALL_EMU" to keep the behaviour unchanged. - Add more strace testcases test. - Add Reviewed-by. - Update the commit message. - Link to v7: https://lore.kernel.org/all/20251117133048.53182-1-ruanjinjie@huawei.com/ Chanegs in v7: - Support "Syscall User Dispatch" by implementing arch_syscall_is_vdso_sigreturn() as kemal suggested. - Add aarch64 support for "sud" selftest testcase, which tested ok with the patch series. - Fix the kernel test robot warning for arch_ptrace_report_syscall_entry() and arch_ptrace_report_syscall_exit() in asm/entry-common.h. - Add perf syscall performance test. - Link to v6: https://lore.kernel.org/all/20250916082611.2972008-1-ruanjinjie@huawei.com/ Changes in v6: - Rebased on v6.17-rc5-next as arm64 generic irq entry has merged. - Update the commit message. - Link to v5: https://lore.kernel.org/all/20241206101744.4161990-1-ruanjinjie@huawei.com/ Changes in v5: - Not change arm32 and keep inerrupts_enabled() macro for gicv3 driver. - Move irqentry_state definition into arch/arm64/kernel/entry-common.c. - Avoid removing the __enter_from_*() and __exit_to_*() wrappers. - Update "irqentry_state_t ret/irq_state" to "state" to keep it consistently. - Use generic irq entry header for PREEMPT_DYNAMIC after split the generic entry. - Also refactor the ARM64 syscall code. - Introduce arch_ptrace_report_syscall_entry/exit(), instead of arch_pre/post_report_syscall_entry/exit() to simplify code. - Make the syscall patches clear separation. - Update the commit message. - Link to v4: https://lore.kernel.org/all/20241025100700.3714552-1-ruanjinjie@huawei.com/ Changes in v4: - Rework/cleanup split into a few patches as Mark suggested. - Replace interrupts_enabled() macro with regs_irqs_disabled(), instead of left it here. - Remove rcu and lockdep state in pt_regs by using temporary irqentry_state_t as Mark suggested. - Remove some unnecessary intermediate functions to make it clear. - Rework preempt irq and PREEMPT_DYNAMIC code to make the switch more clear. - arch_prepare_*_entry/exit() -> arch_pre_*_entry/exit(). - Expand the arch functions comment. - Make arch functions closer to its caller. - Declare saved_reg in for block. - Remove arch_exit_to_kernel_mode_prepare(), arch_enter_from_kernel_mode(). - Adjust "Add few arch functions to use generic entry" patch to be the penultimate. - Update the commit message. - Add suggested-by. - Link to v3: https://lore.kernel.org/all/20240629085601.470241-1-ruanjinjie@huawei.com/ Changes in v3: - Test the MTE test cases. - Handle forget_syscall() in arch_post_report_syscall_entry() - Make the arch funcs not use __weak as Thomas suggested, so move the arch funcs to entry-common.h, and make arch_forget_syscall() folded in arch_post_report_syscall_entry() as suggested. - Move report_single_step() to thread_info.h for arm64 - Change __always_inline() to inline, add inline for the other arch funcs. - Remove unused signal.h for entry-common.h. - Add Suggested-by. - Update the commit message. Changes in v2: - Add tested-by. - Fix a bug that not call arch_post_report_syscall_entry() in syscall_trace_enter() if ptrace_report_syscall_entry() return not zero. - Refactor report_syscall(). - Add comment for arch_prepare_report_syscall_exit(). - Adjust entry-common.h header file inclusion to alphabetical order. - Update the commit message. Jinjie Ruan (11): arm64: Remove unused _TIF_WORK_MASK arm64/ptrace: Split report_syscall() arm64/ptrace: Refactor syscall_trace_enter/exit() arm64: ptrace: Move rseq_syscall() before audit_syscall_exit() arm64: syscall: Rework el0_svc_common() arm64/ptrace: Return early for ptrace_report_syscall_entry() error arm64/ptrace: Expand secure_computing() in place arm64/ptrace: Use syscall_get_arguments() heleper entry: Split syscall_exit_to_user_mode_work() for arch reuse entry: Add arch_ptrace_report_syscall_entry/exit() arm64: entry: Convert to generic entry kemal (1): selftests: sud_test: Support aarch64 arch/arm64/Kconfig | 2 +- arch/arm64/include/asm/entry-common.h | 76 ++++++++++++++++ arch/arm64/include/asm/syscall.h | 21 ++++- arch/arm64/include/asm/thread_info.h | 22 +---- arch/arm64/kernel/debug-monitors.c | 7 ++ arch/arm64/kernel/ptrace.c | 90 ------------------- arch/arm64/kernel/signal.c | 2 +- arch/arm64/kernel/syscall.c | 25 ++---- include/linux/entry-common.h | 35 +++++--- kernel/entry/syscall-common.c | 43 ++++++++- .../syscall_user_dispatch/sud_test.c | 4 + 11 files changed, 179 insertions(+), 148 deletions(-) -- 2.34.1