Currently, x86, Riscv, Loongarch use the generic entry which makes maintainers' work easier and codes more elegant. arm64 has already switched to the generic IRQ entry, so completely convert arm64 to use the generic entry infrastructure from kernel/entry/*. The changes are below: - Remove TIF_SYSCALL_* flag. - Remove _TIF_SYSCALL_WORK and has_syscall_work(), as _TIF_SYSCALL_WORK is equal with SYSCALL_WORK_ENTER. - Implement arch_ptrace_report_syscall_entry/exit() with report_syscall_entry/exit() to do arm64-specific save/restore during syscall entry/exit. - Add "ARCH_SYSCALL_WORK_EXIT" to be defined as "_TIF_SECCOMP | _TIF_SYSCALL_EMU" to keep the arm64 behaviour unchanged. - Remove arm64 syscall_trace_enter(), syscall_exit_to_user_mode_prepare(), and related sub-functions including syscall_exit_work() and syscall_enter_audit(), by calling generic entry's functions with similar functionality. - Implement arch_syscall_is_vdso_sigreturn() to support "Syscall User Dispatch". Suggested-by: Kevin Brodsky <kevin.brodsky@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/Kconfig | 2 +- arch/arm64/include/asm/entry-common.h | 76 +++++++++++++ arch/arm64/include/asm/syscall.h | 19 +++- arch/arm64/include/asm/thread_info.h | 19 +--- arch/arm64/kernel/debug-monitors.c | 7 ++ arch/arm64/kernel/ptrace.c | 153 -------------------------- arch/arm64/kernel/signal.c | 2 +- arch/arm64/kernel/syscall.c | 6 +- 8 files changed, 107 insertions(+), 177 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 6663ffd23f25..1463ff15d67a 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -152,9 +152,9 @@ config ARM64 select GENERIC_CPU_DEVICES select GENERIC_CPU_VULNERABILITIES select GENERIC_EARLY_IOREMAP + select GENERIC_ENTRY select GENERIC_IDLE_POLL_SETUP select GENERIC_IOREMAP - select GENERIC_IRQ_ENTRY select GENERIC_IRQ_IPI select GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD select GENERIC_IRQ_PROBE diff --git a/arch/arm64/include/asm/entry-common.h b/arch/arm64/include/asm/entry-common.h index cab8cd78f693..d8bf4bf342e8 100644 --- a/arch/arm64/include/asm/entry-common.h +++ b/arch/arm64/include/asm/entry-common.h @@ -3,14 +3,21 @@ #ifndef _ASM_ARM64_ENTRY_COMMON_H #define _ASM_ARM64_ENTRY_COMMON_H +#include <linux/ptrace.h> #include <linux/thread_info.h> +#include <asm/compat.h> #include <asm/cpufeature.h> #include <asm/daifflags.h> #include <asm/fpsimd.h> #include <asm/mte.h> #include <asm/stacktrace.h> +enum ptrace_syscall_dir { + PTRACE_SYSCALL_ENTER = 0, + PTRACE_SYSCALL_EXIT, +}; + #define ARCH_EXIT_TO_USER_MODE_WORK (_TIF_MTE_ASYNC_FAULT | _TIF_FOREIGN_FPSTATE) static __always_inline void arch_exit_to_user_mode_work(struct pt_regs *regs, @@ -54,4 +61,73 @@ static inline bool arch_irqentry_exit_need_resched(void) #define arch_irqentry_exit_need_resched arch_irqentry_exit_need_resched +static __always_inline unsigned long ptrace_save_reg(struct pt_regs *regs, + enum ptrace_syscall_dir dir, + int *regno) +{ + unsigned long saved_reg; + + /* + * We have some ABI weirdness here in the way that we handle syscall + * exit stops because we indicate whether or not the stop has been + * signalled from syscall entry or syscall exit by clobbering a general + * purpose register (ip/r12 for AArch32, x7 for AArch64) in the tracee + * and restoring its old value after the stop. This means that: + * + * - Any writes by the tracer to this register during the stop are + * ignored/discarded. + * + * - The actual value of the register is not available during the stop, + * so the tracer cannot save it and restore it later. + * + * - Syscall stops behave differently to seccomp and pseudo-step traps + * (the latter do not nobble any registers). + */ + *regno = (is_compat_task() ? 12 : 7); + saved_reg = regs->regs[*regno]; + regs->regs[*regno] = dir; + + return saved_reg; +} + +static __always_inline int arch_ptrace_report_syscall_entry(struct pt_regs *regs) +{ + unsigned long saved_reg; + int regno, ret; + + saved_reg = ptrace_save_reg(regs, PTRACE_SYSCALL_ENTER, ®no); + ret = ptrace_report_syscall_entry(regs); + if (ret) + forget_syscall(regs); + regs->regs[regno] = saved_reg; + + return ret; +} + +#define arch_ptrace_report_syscall_entry arch_ptrace_report_syscall_entry + +static __always_inline void arch_ptrace_report_syscall_exit(struct pt_regs *regs, + int step) +{ + unsigned long saved_reg; + int regno; + + saved_reg = ptrace_save_reg(regs, PTRACE_SYSCALL_EXIT, ®no); + if (!step) { + ptrace_report_syscall_exit(regs, 0); + regs->regs[regno] = saved_reg; + } else { + regs->regs[regno] = saved_reg; + + /* + * Signal a pseudo-step exception since we are stepping but + * tracer modifications to the registers may have rewound the + * state machine. + */ + ptrace_report_syscall_exit(regs, 1); + } +} + +#define arch_ptrace_report_syscall_exit arch_ptrace_report_syscall_exit + #endif /* _ASM_ARM64_ENTRY_COMMON_H */ diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h index 9f2aa9c57560..240d45735cc5 100644 --- a/arch/arm64/include/asm/syscall.h +++ b/arch/arm64/include/asm/syscall.h @@ -9,6 +9,9 @@ #include <linux/compat.h> #include <linux/err.h> +#include <asm/compat.h> +#include <asm/vdso.h> + typedef long (*syscall_fn_t)(const struct pt_regs *regs); extern const syscall_fn_t sys_call_table[]; @@ -120,7 +123,19 @@ static inline int syscall_get_arch(struct task_struct *task) return AUDIT_ARCH_AARCH64; } -int syscall_trace_enter(struct pt_regs *regs, long syscall, unsigned long flags); -void syscall_exit_to_user_mode_prepare(struct pt_regs *regs); +static inline bool arch_syscall_is_vdso_sigreturn(struct pt_regs *regs) +{ + unsigned long sigtramp; + +#ifdef CONFIG_COMPAT + if (is_compat_task()) { + unsigned long sigpage = (unsigned long)current->mm->context.sigpage; + + return regs->pc >= sigpage && regs->pc < (sigpage + PAGE_SIZE); + } +#endif + sigtramp = (unsigned long)VDSO_SYMBOL(current->mm->context.vdso, sigtramp); + return regs->pc == (sigtramp + 8); +} #endif /* __ASM_SYSCALL_H */ diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index 8d308ef64612..0c083be23018 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -43,6 +43,7 @@ struct thread_info { void *scs_sp; #endif u32 cpu; + unsigned long syscall_work; /* SYSCALL_WORK_ flags */ }; #define thread_saved_pc(tsk) \ @@ -65,11 +66,6 @@ void arch_setup_new_exec(void); #define TIF_UPROBE 5 /* uprobe breakpoint or singlestep */ #define TIF_MTE_ASYNC_FAULT 6 /* MTE Asynchronous Tag Check Fault */ #define TIF_NOTIFY_SIGNAL 7 /* signal notifications exist */ -#define TIF_SYSCALL_TRACE 8 /* syscall trace active */ -#define TIF_SYSCALL_AUDIT 9 /* syscall auditing */ -#define TIF_SYSCALL_TRACEPOINT 10 /* syscall tracepoint for ftrace */ -#define TIF_SECCOMP 11 /* syscall secure computing */ -#define TIF_SYSCALL_EMU 12 /* syscall emulation active */ #define TIF_PATCH_PENDING 13 /* pending live patching update */ #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 @@ -92,27 +88,14 @@ void arch_setup_new_exec(void); #define _TIF_NEED_RESCHED_LAZY (1 << TIF_NEED_RESCHED_LAZY) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_FOREIGN_FPSTATE (1 << TIF_FOREIGN_FPSTATE) -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) #define _TIF_PATCH_PENDING (1 << TIF_PATCH_PENDING) #define _TIF_UPROBE (1 << TIF_UPROBE) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_32BIT (1 << TIF_32BIT) #define _TIF_SVE (1 << TIF_SVE) #define _TIF_MTE_ASYNC_FAULT (1 << TIF_MTE_ASYNC_FAULT) #define _TIF_NOTIFY_SIGNAL (1 << TIF_NOTIFY_SIGNAL) #define _TIF_TSC_SIGSEGV (1 << TIF_TSC_SIGSEGV) -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \ - _TIF_SYSCALL_EMU) - -#define _TIF_SYSCALL_EXIT_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SYSCALL_TRACEPOINT) - #ifdef CONFIG_SHADOW_CALL_STACK #define INIT_SCS \ .scs_base = init_shadow_call_stack, \ diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 29307642f4c9..e67643a70405 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -385,11 +385,18 @@ void user_enable_single_step(struct task_struct *task) if (!test_and_set_ti_thread_flag(ti, TIF_SINGLESTEP)) set_regs_spsr_ss(task_pt_regs(task)); + + /* + * Ensure that a trap is triggered once stepping out of a system + * call prior to executing any user instruction. + */ + set_task_syscall_work(task, SYSCALL_EXIT_TRAP); } NOKPROBE_SYMBOL(user_enable_single_step); void user_disable_single_step(struct task_struct *task) { clear_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP); + clear_task_syscall_work(task, SYSCALL_EXIT_TRAP); } NOKPROBE_SYMBOL(user_disable_single_step); diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 36e7ba3f38a5..cfbb6e409fcf 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -8,7 +8,6 @@ * Copyright (C) 2012 ARM Ltd. */ -#include <linux/audit.h> #include <linux/compat.h> #include <linux/kernel.h> #include <linux/sched/signal.h> @@ -18,7 +17,6 @@ #include <linux/smp.h> #include <linux/ptrace.h> #include <linux/user.h> -#include <linux/seccomp.h> #include <linux/security.h> #include <linux/init.h> #include <linux/signal.h> @@ -28,7 +26,6 @@ #include <linux/hw_breakpoint.h> #include <linux/regset.h> #include <linux/elf.h> -#include <linux/rseq.h> #include <asm/compat.h> #include <asm/cpufeature.h> @@ -38,13 +35,9 @@ #include <asm/mte.h> #include <asm/pointer_auth.h> #include <asm/stacktrace.h> -#include <asm/syscall.h> #include <asm/traps.h> #include <asm/system_misc.h> -#define CREATE_TRACE_POINTS -#include <trace/events/syscalls.h> - struct pt_regs_offset { const char *name; int offset; @@ -2312,152 +2305,6 @@ long arch_ptrace(struct task_struct *child, long request, return ptrace_request(child, request, addr, data); } -enum ptrace_syscall_dir { - PTRACE_SYSCALL_ENTER = 0, - PTRACE_SYSCALL_EXIT, -}; - -static __always_inline unsigned long ptrace_save_reg(struct pt_regs *regs, - enum ptrace_syscall_dir dir, - int *regno) -{ - unsigned long saved_reg; - - /* - * We have some ABI weirdness here in the way that we handle syscall - * exit stops because we indicate whether or not the stop has been - * signalled from syscall entry or syscall exit by clobbering a general - * purpose register (ip/r12 for AArch32, x7 for AArch64) in the tracee - * and restoring its old value after the stop. This means that: - * - * - Any writes by the tracer to this register during the stop are - * ignored/discarded. - * - * - The actual value of the register is not available during the stop, - * so the tracer cannot save it and restore it later. - * - * - Syscall stops behave differently to seccomp and pseudo-step traps - * (the latter do not nobble any registers). - */ - *regno = (is_compat_task() ? 12 : 7); - saved_reg = regs->regs[*regno]; - regs->regs[*regno] = dir; - - return saved_reg; -} - -static int report_syscall_entry(struct pt_regs *regs) -{ - unsigned long saved_reg; - int regno, ret; - - saved_reg = ptrace_save_reg(regs, PTRACE_SYSCALL_ENTER, ®no); - ret = ptrace_report_syscall_entry(regs); - if (ret) - forget_syscall(regs); - regs->regs[regno] = saved_reg; - - return ret; -} - -static void report_syscall_exit(struct pt_regs *regs) -{ - unsigned long saved_reg; - int regno; - - saved_reg = ptrace_save_reg(regs, PTRACE_SYSCALL_EXIT, ®no); - if (!test_thread_flag(TIF_SINGLESTEP)) { - ptrace_report_syscall_exit(regs, 0); - regs->regs[regno] = saved_reg; - } else { - regs->regs[regno] = saved_reg; - - /* - * Signal a pseudo-step exception since we are stepping but - * tracer modifications to the registers may have rewound the - * state machine. - */ - ptrace_report_syscall_exit(regs, 1); - } -} - -static inline void syscall_enter_audit(struct pt_regs *regs, long syscall) -{ - if (unlikely(audit_context())) { - unsigned long args[6]; - - syscall_get_arguments(current, regs, args); - audit_syscall_entry(syscall, args[0], args[1], args[2], args[3]); - } -} - -int syscall_trace_enter(struct pt_regs *regs, long syscall, unsigned long flags) -{ - int ret; - - if (flags & (_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE)) { - ret = report_syscall_entry(regs); - if (ret || (flags & _TIF_SYSCALL_EMU)) - return NO_SYSCALL; - } - - /* Do the secure computing after ptrace; failures should be fast. */ - if (flags & _TIF_SECCOMP) { - ret = __secure_computing(); - if (ret == -1) - return NO_SYSCALL; - } - - /* Either of the above might have changed the syscall number */ - syscall = syscall_get_nr(current, regs); - - if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) { - trace_sys_enter(regs, syscall); - - /* - * Probes or BPF hooks in the tracepoint may have changed the - * system call number as well. - */ - syscall = syscall_get_nr(current, regs); - } - - syscall_enter_audit(regs, syscall); - - return ret ? : syscall; -} - -static inline bool report_single_step(unsigned long flags) -{ - if (flags & _TIF_SYSCALL_EMU) - return false; - - return flags & _TIF_SINGLESTEP; -} - -static void syscall_exit_work(struct pt_regs *regs, unsigned long flags) -{ - bool step; - - audit_syscall_exit(regs); - - if (flags & _TIF_SYSCALL_TRACEPOINT) - trace_sys_exit(regs, syscall_get_return_value(current, regs)); - - step = report_single_step(flags); - if (step || flags & _TIF_SYSCALL_TRACE) - report_syscall_exit(regs); -} - -void syscall_exit_to_user_mode_prepare(struct pt_regs *regs) -{ - unsigned long flags = read_thread_flags(); - - rseq_syscall(regs); - - if (unlikely(flags & _TIF_SYSCALL_EXIT_WORK) || flags & _TIF_SINGLESTEP) - syscall_exit_work(regs, flags); -} - /* * SPSR_ELx bits which are always architecturally RES0 per ARM DDI 0487D.a. * We permit userspace to set SSBS (AArch64 bit 12, AArch32 bit 23) which is diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 1110eeb21f57..d3ec1892b3c7 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -8,8 +8,8 @@ #include <linux/cache.h> #include <linux/compat.h> +#include <linux/entry-common.h> #include <linux/errno.h> -#include <linux/irq-entry-common.h> #include <linux/kernel.h> #include <linux/signal.h> #include <linux/freezer.h> diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index 881fd261e8cb..47e193a1cfff 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -2,6 +2,7 @@ #include <linux/compiler.h> #include <linux/context_tracking.h> +#include <linux/entry-common.h> #include <linux/errno.h> #include <linux/nospec.h> #include <linux/ptrace.h> @@ -68,6 +69,7 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno, static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, const syscall_fn_t syscall_table[]) { + unsigned long work = READ_ONCE(current_thread_info()->syscall_work); unsigned long flags = read_thread_flags(); regs->orig_x0 = regs->regs[0]; @@ -101,7 +103,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, return; } - if (unlikely(flags & _TIF_SYSCALL_WORK)) { + if (unlikely(work & SYSCALL_WORK_ENTER)) { /* * The de-facto standard way to skip a system call using ptrace * is to set the system call to -1 (NO_SYSCALL) and set x0 to a @@ -119,7 +121,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, */ if (scno == NO_SYSCALL) syscall_set_return_value(current, regs, -ENOSYS, 0); - scno = syscall_trace_enter(regs, scno, flags); + scno = syscall_trace_enter(regs, scno, work); if (scno == NO_SYSCALL) goto trace_exit; } -- 2.34.1