From: Bitao Hu <yaoma@linux.alibaba.com> mainline inclusion from mainline-v6.10-rc1 commit d7037381d00286aa4beb631c401da761ee564c94 category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8335 Reference: https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commi... -------------------------------- The following softlockup is caused by interrupt storm, but it cannot be identified from the call tree. Because the call tree is just a snapshot and doesn't fully capture the behavior of the CPU during the soft lockup. watchdog: BUG: soft lockup - CPU#28 stuck for 23s! [fio:83921] ... Call trace: __do_softirq+0xa0/0x37c __irq_exit_rcu+0x108/0x140 irq_exit+0x14/0x20 __handle_domain_irq+0x84/0xe0 gic_handle_irq+0x80/0x108 el0_irq_naked+0x50/0x58 Therefore, it is necessary to report CPU utilization during the softlockup_threshold period (report once every sample_period, for a total of 5 reportings), like this: watchdog: BUG: soft lockup - CPU#28 stuck for 23s! [fio:83921] CPU#28 Utilization every 4s during lockup: #1: 0% system, 0% softirq, 100% hardirq, 0% idle #2: 0% system, 0% softirq, 100% hardirq, 0% idle #3: 0% system, 0% softirq, 100% hardirq, 0% idle #4: 0% system, 0% softirq, 100% hardirq, 0% idle #5: 0% system, 0% softirq, 100% hardirq, 0% idle ... This is helpful in determining whether an interrupt storm has occurred or in identifying the cause of the softlockup. The criteria for determination are as follows: a. If the hardirq utilization is high, then interrupt storm should be considered and the root cause cannot be determined from the call tree. b. If the softirq utilization is high, then the call might not necessarily point at the root cause. c. If the system utilization is high, then analyzing the root cause from the call tree is possible in most cases. The mechanism requires a considerable amount of global storage space when configured for the maximum number of CPUs. Therefore, adding a SOFTLOCKUP_DETECTOR_INTR_STORM Kconfig knob that defaults to "yes" if the max number of CPUs is <= 128. Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Liu Song <liusong@linux.alibaba.com> Link: https://lore.kernel.org/r/20240411074134.30922-5-yaoma@linux.alibaba.com Conflicts: kernel/watchdog.c [Only pick the part modified by this mainline commit, and ignore the conflict part caused by higher version.] Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Signed-off-by: cheliequan <cheliequan@inspur.com> Signed-off-by: Luo Gengkun <luogengkun2@huawei.com> --- kernel/watchdog.c | 99 ++++++++++++++++++++++++++++++++++++++++++++++- lib/Kconfig.debug | 14 +++++++ 2 files changed, 112 insertions(+), 1 deletion(-) diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 6313fe17bca7..8ee313d6939e 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -17,6 +17,8 @@ #include <linux/nmi.h> #include <linux/init.h> #include <linux/kprobes.h> +#include <linux/kernel_stat.h> +#include <linux/math64.h> #include <linux/module.h> #include <linux/sysctl.h> #include <linux/tick.h> @@ -36,6 +38,8 @@ static DEFINE_MUTEX(watchdog_mutex); # define WATCHDOG_HARDLOCKUP_DEFAULT 0 #endif +#define NUM_SAMPLE_PERIODS 5 + unsigned long __read_mostly watchdog_enabled; int __read_mostly watchdog_user_enabled = 1; static int __read_mostly watchdog_hardlockup_user_enabled = WATCHDOG_HARDLOCKUP_DEFAULT; @@ -317,6 +321,96 @@ __setup("watchdog_thresh=", watchdog_thresh_setup); static void __lockup_detector_cleanup(void); +#ifdef CONFIG_SOFTLOCKUP_DETECTOR_INTR_STORM +enum stats_per_group { + STATS_SYSTEM, + STATS_SOFTIRQ, + STATS_HARDIRQ, + STATS_IDLE, + NUM_STATS_PER_GROUP, +}; + +static const enum cpu_usage_stat tracked_stats[NUM_STATS_PER_GROUP] = { + CPUTIME_SYSTEM, + CPUTIME_SOFTIRQ, + CPUTIME_IRQ, + CPUTIME_IDLE, +}; + +static DEFINE_PER_CPU(u16, cpustat_old[NUM_STATS_PER_GROUP]); +static DEFINE_PER_CPU(u8, cpustat_util[NUM_SAMPLE_PERIODS][NUM_STATS_PER_GROUP]); +static DEFINE_PER_CPU(u8, cpustat_tail); + +/* + * We don't need nanosecond resolution. A granularity of 16ms is + * sufficient for our precision, allowing us to use u16 to store + * cpustats, which will roll over roughly every ~1000 seconds. + * 2^24 ~= 16 * 10^6 + */ +static u16 get_16bit_precision(u64 data_ns) +{ + return data_ns >> 24LL; /* 2^24ns ~= 16.8ms */ +} + +static void update_cpustat(void) +{ + int i; + u8 util; + u16 old_stat, new_stat; + struct kernel_cpustat kcpustat; + u64 *cpustat = kcpustat.cpustat; + u8 tail = __this_cpu_read(cpustat_tail); + u16 sample_period_16 = get_16bit_precision(sample_period); + + kcpustat_cpu_fetch(&kcpustat, smp_processor_id()); + + for (i = 0; i < NUM_STATS_PER_GROUP; i++) { + old_stat = __this_cpu_read(cpustat_old[i]); + new_stat = get_16bit_precision(cpustat[tracked_stats[i]]); + util = DIV_ROUND_UP(100 * (new_stat - old_stat), sample_period_16); + __this_cpu_write(cpustat_util[tail][i], util); + __this_cpu_write(cpustat_old[i], new_stat); + } + + __this_cpu_write(cpustat_tail, (tail + 1) % NUM_SAMPLE_PERIODS); +} + +static void print_cpustat(void) +{ + int i, group; + u8 tail = __this_cpu_read(cpustat_tail); + u64 sample_period_second = sample_period; + + do_div(sample_period_second, NSEC_PER_SEC); + + /* + * Outputting the "watchdog" prefix on every line is redundant and not + * concise, and the original alarm information is sufficient for + * positioning in logs, hence here printk() is used instead of pr_crit(). + */ + printk(KERN_CRIT "CPU#%d Utilization every %llus during lockup:\n", + smp_processor_id(), sample_period_second); + + for (i = 0; i < NUM_SAMPLE_PERIODS; i++) { + group = (tail + i) % NUM_SAMPLE_PERIODS; + printk(KERN_CRIT "\t#%d: %3u%% system,\t%3u%% softirq,\t" + "%3u%% hardirq,\t%3u%% idle\n", i + 1, + __this_cpu_read(cpustat_util[group][STATS_SYSTEM]), + __this_cpu_read(cpustat_util[group][STATS_SOFTIRQ]), + __this_cpu_read(cpustat_util[group][STATS_HARDIRQ]), + __this_cpu_read(cpustat_util[group][STATS_IDLE])); + } +} + +static void report_cpu_status(void) +{ + print_cpustat(); +} +#else +static inline void update_cpustat(void) { } +static inline void report_cpu_status(void) { } +#endif + /* * Hard-lockup warnings should be triggered after just a few seconds. Soft- * lockups can have false positives under extreme conditions. So we generally @@ -348,7 +442,7 @@ static void set_sample_period(void) * and hard thresholds) to increment before the * hardlockup detector generates a warning */ - sample_period = get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5); + sample_period = get_softlockup_thresh() * ((u64)NSEC_PER_SEC / NUM_SAMPLE_PERIODS); watchdog_update_hrtimer_threshold(sample_period); } @@ -487,6 +581,8 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer) */ period_ts = READ_ONCE(*this_cpu_ptr(&watchdog_report_ts)); + update_cpustat(); + /* Reset the interval when touched by known problematic code. */ if (period_ts == SOFTLOCKUP_DELAY_REPORT) { if (unlikely(__this_cpu_read(softlockup_touch_sync))) { @@ -521,6 +617,7 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer) pr_emerg("BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n", smp_processor_id(), duration, current->comm, task_pid_nr(current)); + report_cpu_status(); print_modules(); print_irqtrace_events(current); if (regs) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 0dc5e7d6579e..68f4317e59f1 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1037,6 +1037,20 @@ config SOFTLOCKUP_DETECTOR chance to run. The current stack trace is displayed upon detection and the system will stay locked up. +config SOFTLOCKUP_DETECTOR_INTR_STORM + bool "Detect Interrupt Storm in Soft Lockups" + depends on SOFTLOCKUP_DETECTOR && IRQ_TIME_ACCOUNTING + select GENERIC_IRQ_STAT_SNAPSHOT + default y if NR_CPUS <= 128 + help + Say Y here to enable the kernel to detect interrupt storm + during "soft lockups". + + "soft lockups" can be caused by a variety of reasons. If one is + caused by an interrupt storm, then the storming interrupts will not + be on the callstack. To detect this case, it is necessary to report + the CPU stats and the interrupt counts during the "soft lockups". + config BOOTPARAM_SOFTLOCKUP_PANIC bool "Panic (Reboot) On Soft Lockups" depends on SOFTLOCKUP_DETECTOR -- 2.34.1