From: Marco Felsch <m.felsch@pengutronix.de> commit 636b45b8efa91db05553840b6c0120d6fa6b94fa upstream. The current set minimum voltage of 730000µV seems to be wrong. I don't know the document which specifies that but the imx6qdl datasheets says that the minimum voltage should be 0.925V for VDD_ARM (LDO bypassed, lowest opp) and 1.15V for VDD_SOC (LDO bypassed, lowest opp). Fixes: ddec5d1c0047 ("ARM: dts: imx6: Add initial support for phyCORE-i.MX 6 SOM") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 881cea0..31fa37d 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -107,14 +107,14 @@ regulators { vdd_arm: buck1 { regulator-name = "vdd_arm"; - regulator-min-microvolt = <730000>; + regulator-min-microvolt = <925000>; regulator-max-microvolt = <1380000>; regulator-always-on; }; vdd_soc: buck2 { regulator-name = "vdd_soc"; - regulator-min-microvolt = <730000>; + regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1380000>; regulator-always-on; }; -- 1.8.3