From: Björn Töpel <bjorn@rivosinc.com> mainline inclusion from mainline-v6.12-rc4 commit 7941b83bceb374c7e81061e0ebb45cd45f3e3517 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/ID7HLY Reference: https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commi... -------------------------------- The sched_ext selftests is missing proper cross-compilation support, a proper target entry, and out-of-tree build support. When building the kselftest suite, e.g.: make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \ TARGETS=sched_ext SKIP_TARGETS="" O=/output/foo \ -C tools/testing/selftests install or: make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \ O=/output/foo -C tools/testing/selftests install The expectation is that the sched_ext is included, cross-built, the correct toolchain is picked up, and placed into /output/foo. In contrast to the BPF selftests, the sched_ext suite does not use bpftool at test run-time, so it is sufficient to build bpftool for the build host only. Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext selftest. Also, remove some variables that were unused by the Makefile. Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: David Vernet <void@manifault.com> Tested-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org> Conflicts: tools/testing/selftests/Makefile [Only pick the part modified by this mainline commit, and ignore the conflict part caused by higher version.] Signed-off-by: Zicheng Qu <quzicheng@huawei.com> Signed-off-by: cheliequan <cheliequan@inspur.com> Signed-off-by: Luo Gengkun <luogengkun2@huawei.com> --- tools/testing/selftests/Makefile | 9 +-- tools/testing/selftests/sched_ext/Makefile | 71 ++++++++++------------ 2 files changed, 37 insertions(+), 43 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 59f4103e0ca5..3d99d549d7aa 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -74,6 +74,7 @@ TARGETS += riscv TARGETS += rlimits TARGETS += rseq TARGETS += rtc +TARGETS += sched_ext TARGETS += seccomp TARGETS += sgx TARGETS += sigaltstack @@ -107,10 +108,10 @@ TARGETS += zram TARGETS_HOTPLUG = cpu-hotplug TARGETS_HOTPLUG += memory-hotplug -# User can optionally provide a TARGETS skiplist. By default we skip -# BPF since it has cutting edge build time dependencies which require -# more effort to install. -SKIP_TARGETS ?= bpf +# User can optionally provide a TARGETS skiplist. By default we skip +# targets using BPF since it has cutting edge build time dependencies +# which require more effort to install. +SKIP_TARGETS ?= bpf sched_ext ifneq ($(SKIP_TARGETS),) TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS)) override TARGETS := $(TMP) diff --git a/tools/testing/selftests/sched_ext/Makefile b/tools/testing/selftests/sched_ext/Makefile index 0754a2c110a1..06ae9c107049 100644 --- a/tools/testing/selftests/sched_ext/Makefile +++ b/tools/testing/selftests/sched_ext/Makefile @@ -3,23 +3,12 @@ include ../../../build/Build.include include ../../../scripts/Makefile.arch include ../../../scripts/Makefile.include -include ../lib.mk -ifneq ($(LLVM),) -ifneq ($(filter %/,$(LLVM)),) -LLVM_PREFIX := $(LLVM) -else ifneq ($(filter -%,$(LLVM)),) -LLVM_SUFFIX := $(LLVM) -endif - -CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) $(CLANG_FLAGS) -fintegrated-as -else -CC := gcc -endif # LLVM +TEST_GEN_PROGS := runner -ifneq ($(CROSS_COMPILE),) -$(error CROSS_COMPILE not supported for scx selftests) -endif # CROSS_COMPILE +# override lib.mk's default rules +OVERRIDE_TARGETS := 1 +include ../lib.mk CURDIR := $(abspath .) REPOROOT := $(abspath ../../../..) @@ -34,18 +23,23 @@ GENHDR := $(GENDIR)/autoconf.h SCXTOOLSDIR := $(TOOLSDIR)/sched_ext SCXTOOLSINCDIR := $(TOOLSDIR)/sched_ext/include -OUTPUT_DIR := $(CURDIR)/build +OUTPUT_DIR := $(OUTPUT)/build OBJ_DIR := $(OUTPUT_DIR)/obj INCLUDE_DIR := $(OUTPUT_DIR)/include BPFOBJ_DIR := $(OBJ_DIR)/libbpf SCXOBJ_DIR := $(OBJ_DIR)/sched_ext BPFOBJ := $(BPFOBJ_DIR)/libbpf.a LIBBPF_OUTPUT := $(OBJ_DIR)/libbpf/libbpf.a -DEFAULT_BPFTOOL := $(OUTPUT_DIR)/sbin/bpftool -HOST_BUILD_DIR := $(OBJ_DIR) -HOST_OUTPUT_DIR := $(OUTPUT_DIR) -VMLINUX_BTF_PATHS ?= ../../../../vmlinux \ +DEFAULT_BPFTOOL := $(OUTPUT_DIR)/host/sbin/bpftool +HOST_OBJ_DIR := $(OBJ_DIR)/host/bpftool +HOST_LIBBPF_OUTPUT := $(OBJ_DIR)/host/libbpf/ +HOST_LIBBPF_DESTDIR := $(OUTPUT_DIR)/host/ +HOST_DESTDIR := $(OUTPUT_DIR)/host/ + +VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \ + $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \ + ../../../../vmlinux \ /sys/kernel/btf/vmlinux \ /boot/vmlinux-$(shell uname -r) VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS)))) @@ -80,17 +74,23 @@ IS_LITTLE_ENDIAN = $(shell $(CC) -dM -E - </dev/null | \ # Use '-idirafter': Don't interfere with include mechanics except where the # build would have failed anyways. define get_sys_includes -$(shell $(1) -v -E - </dev/null 2>&1 \ +$(shell $(1) $(2) -v -E - </dev/null 2>&1 \ | sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \ -$(shell $(1) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') +$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') endef +ifneq ($(CROSS_COMPILE),) +CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%)) +endif + +CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH)) + BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \ $(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian) \ -I$(CURDIR)/include -I$(CURDIR)/include/bpf-compat \ -I$(INCLUDE_DIR) -I$(APIDIR) -I$(SCXTOOLSINCDIR) \ -I$(REPOROOT)/include \ - $(call get_sys_includes,$(CLANG)) \ + $(CLANG_SYS_INCLUDES) \ -Wall -Wno-compare-distinct-pointer-types \ -Wno-incompatible-function-pointer-types \ -O2 -mcpu=v3 @@ -98,7 +98,7 @@ BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \ # sort removes libbpf duplicates when not cross-building MAKE_DIRS := $(sort $(OBJ_DIR)/libbpf $(OBJ_DIR)/libbpf \ $(OBJ_DIR)/bpftool $(OBJ_DIR)/resolve_btfids \ - $(INCLUDE_DIR) $(SCXOBJ_DIR)) + $(HOST_OBJ_DIR) $(INCLUDE_DIR) $(SCXOBJ_DIR)) $(MAKE_DIRS): $(call msg,MKDIR,,$@) @@ -108,18 +108,19 @@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ $(APIDIR)/linux/bpf.h \ | $(OBJ_DIR)/libbpf $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(OBJ_DIR)/libbpf/ \ + ARCH=$(ARCH) CC="$(CC)" CROSS_COMPILE=$(CROSS_COMPILE) \ EXTRA_CFLAGS='-g -O0 -fPIC' \ DESTDIR=$(OUTPUT_DIR) prefix= all install_headers $(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \ - $(LIBBPF_OUTPUT) | $(OBJ_DIR)/bpftool + $(LIBBPF_OUTPUT) | $(HOST_OBJ_DIR) $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \ ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) \ EXTRA_CFLAGS='-g -O0' \ - OUTPUT=$(OBJ_DIR)/bpftool/ \ - LIBBPF_OUTPUT=$(OBJ_DIR)/libbpf/ \ - LIBBPF_DESTDIR=$(OUTPUT_DIR)/ \ - prefix= DESTDIR=$(OUTPUT_DIR)/ install-bin + OUTPUT=$(HOST_OBJ_DIR)/ \ + LIBBPF_OUTPUT=$(HOST_LIBBPF_OUTPUT) \ + LIBBPF_DESTDIR=$(HOST_LIBBPF_DESTDIR) \ + prefix= DESTDIR=$(HOST_DESTDIR) install-bin $(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) | $(INCLUDE_DIR) ifeq ($(VMLINUX_H),) @@ -150,9 +151,7 @@ $(INCLUDE_DIR)/%.bpf.skel.h: $(SCXOBJ_DIR)/%.bpf.o $(INCLUDE_DIR)/vmlinux.h $(BP override define CLEAN rm -rf $(OUTPUT_DIR) - rm -f *.o *.bpf.o *.bpf.skel.h *.bpf.subskel.h rm -f $(TEST_GEN_PROGS) - rm -f runner endef # Every testcase takes all of the BPF progs are dependencies by default. This @@ -196,21 +195,15 @@ $(SCXOBJ_DIR)/runner.o: runner.c | $(SCXOBJ_DIR) # function doesn't support using implicit rules otherwise. $(testcase-targets): $(SCXOBJ_DIR)/%.o: %.c $(SCXOBJ_DIR)/runner.o $(all_test_bpfprogs) | $(SCXOBJ_DIR) $(eval test=$(patsubst %.o,%.c,$(notdir $@))) - $(CC) $(CFLAGS) -c $< -o $@ $(SCXOBJ_DIR)/runner.o + $(CC) $(CFLAGS) -c $< -o $@ $(SCXOBJ_DIR)/util.o: util.c | $(SCXOBJ_DIR) $(CC) $(CFLAGS) -c $< -o $@ -runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets) +$(OUTPUT)/runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets) @echo "$(testcase-targets)" $(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS) -TEST_GEN_PROGS := runner - -all: runner - -.PHONY: all clean help - .DEFAULT_GOAL := all .DELETE_ON_ERROR: -- 2.34.1