From: Yicong Yang <yangyicong@hisilicon.com> driver inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IC0GTV ---------------------------------------------------------------------- Currently each type of uncore PMU driver uses almost the same routine and the same firmware interface (or properties) to retrieve the topology information, then reset the unused IDs to -1. Extract the common parts to the framework in hisi_uncore_pmu_init_topology(). Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> --- drivers/perf/hisilicon/hisi_uncore_cpa_pmu.c | 10 +++---- drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 10 +++---- drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 10 +++---- drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 8 ++--- drivers/perf/hisilicon/hisi_uncore_pa_pmu.c | 11 +++---- drivers/perf/hisilicon/hisi_uncore_pmu.c | 30 +++++++++++++++++++ drivers/perf/hisilicon/hisi_uncore_pmu.h | 1 + drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c | 11 +++---- drivers/perf/hisilicon/hisi_uncore_uc_pmu.c | 12 ++++---- 9 files changed, 60 insertions(+), 43 deletions(-) diff --git a/drivers/perf/hisilicon/hisi_uncore_cpa_pmu.c b/drivers/perf/hisilicon/hisi_uncore_cpa_pmu.c index 982df850b912..749470242782 100644 --- a/drivers/perf/hisilicon/hisi_uncore_cpa_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_cpa_pmu.c @@ -180,20 +180,18 @@ MODULE_DEVICE_TABLE(acpi, hisi_cpa_pmu_acpi_match); static int hisi_cpa_pmu_init_data(struct platform_device *pdev, struct hisi_pmu *cpa_pmu) { - if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id", - &cpa_pmu->topo.sicl_id)) { + hisi_uncore_pmu_init_topology(cpa_pmu, &pdev->dev); + + if (cpa_pmu->topo.sicl_id < 0) { dev_err(&pdev->dev, "Can not read sicl-id\n"); return -EINVAL; } - if (device_property_read_u32(&pdev->dev, "hisilicon,idx-id", - &cpa_pmu->topo.index_id)) { + if (cpa_pmu->topo.index_id < 0) { dev_err(&pdev->dev, "Cannot read idx-id\n"); return -EINVAL; } - cpa_pmu->topo.ccl_id = -1; - cpa_pmu->topo.sccl_id = -1; cpa_pmu->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(cpa_pmu->base)) return PTR_ERR(cpa_pmu->base); diff --git a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c index d2b657254d5f..d951623da06d 100644 --- a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c @@ -274,6 +274,8 @@ static void hisi_ddrc_pmu_clear_int_status(struct hisi_pmu *ddrc_pmu, static int hisi_ddrc_pmu_init_data(struct platform_device *pdev, struct hisi_pmu *ddrc_pmu) { + hisi_uncore_pmu_init_topology(ddrc_pmu, &pdev->dev); + /* * Use the SCCL_ID and DDRC channel ID to identify the * DDRC PMU, while SCCL_ID is in MPIDR[aff2]. @@ -284,13 +286,10 @@ static int hisi_ddrc_pmu_init_data(struct platform_device *pdev, return -EINVAL; } - if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id", - &ddrc_pmu->topo.sccl_id)) { + if (ddrc_pmu->topo.sccl_id < 0) { dev_err(&pdev->dev, "Can not read ddrc sccl-id!\n"); return -EINVAL; } - /* DDRC PMUs only share the same SCCL */ - ddrc_pmu->topo.ccl_id = -1; ddrc_pmu->dev_info = device_get_match_data(&pdev->dev); if (!ddrc_pmu->dev_info) @@ -304,8 +303,7 @@ static int hisi_ddrc_pmu_init_data(struct platform_device *pdev, ddrc_pmu->identifier = readl(ddrc_pmu->base + DDRC_VERSION); if (ddrc_pmu->identifier >= HISI_PMU_V2) { - if (device_property_read_u32(&pdev->dev, "hisilicon,sub-id", - &ddrc_pmu->topo.sub_id)) { + if (ddrc_pmu->topo.sub_id < 0) { dev_err(&pdev->dev, "Can not read sub-id!\n"); return -EINVAL; } diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c index c4283da17f05..238fb51c4a15 100644 --- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c @@ -295,12 +295,13 @@ static int hisi_hha_pmu_init_data(struct platform_device *pdev, unsigned long long id; acpi_status status; + hisi_uncore_pmu_init_topology(hha_pmu, &pdev->dev); + /* * Use SCCL_ID and UID to identify the HHA PMU, while * SCCL_ID is in MPIDR[aff2]. */ - if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id", - &hha_pmu->topo.sccl_id)) { + if (hha_pmu->topo.sccl_id < 0) { dev_err(&pdev->dev, "Can not read hha sccl-id!\n"); return -EINVAL; } @@ -309,8 +310,7 @@ static int hisi_hha_pmu_init_data(struct platform_device *pdev, * Early versions of BIOS support _UID by mistake, so we support * both "hisilicon, idx-id" as preference, if available. */ - if (device_property_read_u32(&pdev->dev, "hisilicon,idx-id", - &hha_pmu->topo.index_id)) { + if (hha_pmu->topo.index_id < 0) { status = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), "_UID", NULL, &id); if (ACPI_FAILURE(status)) { @@ -320,8 +320,6 @@ static int hisi_hha_pmu_init_data(struct platform_device *pdev, hha_pmu->topo.index_id = id; } - /* HHA PMUs only share the same SCCL */ - hha_pmu->topo.ccl_id = -1; hha_pmu->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hha_pmu->base)) { diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index 1c0783a643f7..16f78222e88e 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -355,18 +355,18 @@ MODULE_DEVICE_TABLE(acpi, hisi_l3c_pmu_acpi_match); static int hisi_l3c_pmu_init_data(struct platform_device *pdev, struct hisi_pmu *l3c_pmu) { + hisi_uncore_pmu_init_topology(l3c_pmu, &pdev->dev); + /* * Use the SCCL_ID and CCL_ID to identify the L3C PMU, while * SCCL_ID is in MPIDR[aff2] and CCL_ID is in MPIDR[aff1]. */ - if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id", - &l3c_pmu->topo.sccl_id)) { + if (l3c_pmu->topo.sccl_id < 0) { dev_err(&pdev->dev, "Can not read l3c sccl-id!\n"); return -EINVAL; } - if (device_property_read_u32(&pdev->dev, "hisilicon,ccl-id", - &l3c_pmu->topo.ccl_id)) { + if (l3c_pmu->topo.ccl_id < 0) { dev_err(&pdev->dev, "Can not read l3c ccl-id!\n"); return -EINVAL; } diff --git a/drivers/perf/hisilicon/hisi_uncore_pa_pmu.c b/drivers/perf/hisilicon/hisi_uncore_pa_pmu.c index 57535defff71..ea1b12da32ec 100644 --- a/drivers/perf/hisilicon/hisi_uncore_pa_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_pa_pmu.c @@ -269,25 +269,22 @@ static void hisi_pa_pmu_clear_int_status(struct hisi_pmu *pa_pmu, int idx) static int hisi_pa_pmu_init_data(struct platform_device *pdev, struct hisi_pmu *pa_pmu) { + hisi_uncore_pmu_init_topology(pa_pmu, &pdev->dev); + /* * As PA PMU is in a SICL, use the SICL_ID and the index ID * to identify the PA PMU. */ - if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id", - &pa_pmu->topo.sicl_id)) { + if (pa_pmu->topo.sicl_id < 0) { dev_err(&pdev->dev, "Cannot read sicl-id!\n"); return -EINVAL; } - if (device_property_read_u32(&pdev->dev, "hisilicon,idx-id", - &pa_pmu->topo.index_id)) { + if (pa_pmu->topo.index_id < 0) { dev_err(&pdev->dev, "Cannot read idx-id!\n"); return -EINVAL; } - pa_pmu->topo.ccl_id = -1; - pa_pmu->topo.sccl_id = -1; - pa_pmu->dev_info = device_get_match_data(&pdev->dev); if (!pa_pmu->dev_info) return -ENODEV; diff --git a/drivers/perf/hisilicon/hisi_uncore_pmu.c b/drivers/perf/hisilicon/hisi_uncore_pmu.c index 709c79a0f8ff..0d70b75770aa 100644 --- a/drivers/perf/hisilicon/hisi_uncore_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_pmu.c @@ -14,6 +14,7 @@ #include <linux/err.h> #include <linux/errno.h> #include <linux/interrupt.h> +#include <linux/property.h> #include <asm/cputype.h> #include <asm/local64.h> @@ -543,6 +544,35 @@ int hisi_uncore_pmu_offline_cpu(unsigned int cpu, struct hlist_node *node) } EXPORT_SYMBOL_NS_GPL(hisi_uncore_pmu_offline_cpu, "HISI_PMU"); +/* + * Retrieve the topology information from the firmware for the hisi_pmu device. + * The topology ID will be -1 if we cannot initialize it, it may either due to + * the PMU doesn't locate on this certain topology or the firmware needs to be + * fixed. + */ +void hisi_uncore_pmu_init_topology(struct hisi_pmu *hisi_pmu, struct device *dev) +{ + struct hisi_pmu_topology *topo = &hisi_pmu->topo; + + topo->sccl_id = -1; + topo->ccl_id = -1; + topo->index_id = -1; + topo->sub_id = -1; + + if (device_property_read_u32(dev, "hisilicon,scl-id", &topo->sccl_id)) + dev_dbg(dev, "no scl-id present\n"); + + if (device_property_read_u32(dev, "hisilicon,ccl-id", &topo->ccl_id)) + dev_dbg(dev, "no ccl-id present\n"); + + if (device_property_read_u32(dev, "hisilicon,idx-id", &topo->index_id)) + dev_dbg(dev, "no idx-id present\n"); + + if (device_property_read_u32(dev, "hisilicon,sub-id", &topo->sub_id)) + dev_dbg(dev, "no sub-id present\n"); +} +EXPORT_SYMBOL_NS_GPL(hisi_uncore_pmu_init_topology, "HISI_PMU"); + void hisi_pmu_init(struct hisi_pmu *hisi_pmu, struct module *module) { struct pmu *pmu = &hisi_pmu->pmu; diff --git a/drivers/perf/hisilicon/hisi_uncore_pmu.h b/drivers/perf/hisilicon/hisi_uncore_pmu.h index 4bb33118a165..99370ca84ce0 100644 --- a/drivers/perf/hisilicon/hisi_uncore_pmu.h +++ b/drivers/perf/hisilicon/hisi_uncore_pmu.h @@ -162,6 +162,7 @@ ssize_t hisi_uncore_pmu_identifier_attr_show(struct device *dev, char *page); int hisi_uncore_pmu_init_irq(struct hisi_pmu *hisi_pmu, struct platform_device *pdev); +void hisi_uncore_pmu_init_topology(struct hisi_pmu *hisi_pmu, struct device *dev); void hisi_pmu_init(struct hisi_pmu *hisi_pmu, struct module *module); #endif /* __HISI_UNCORE_PMU_H__ */ diff --git a/drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c index dd1614014448..ffebb188a821 100644 --- a/drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c @@ -288,25 +288,22 @@ MODULE_DEVICE_TABLE(acpi, hisi_sllc_pmu_acpi_match); static int hisi_sllc_pmu_init_data(struct platform_device *pdev, struct hisi_pmu *sllc_pmu) { + hisi_uncore_pmu_init_topology(sllc_pmu, &pdev->dev); + /* * Use the SCCL_ID and the index ID to identify the SLLC PMU, * while SCCL_ID is from MPIDR_EL1 by CPU. */ - if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id", - &sllc_pmu->topo.sccl_id)) { + if (sllc_pmu->topo.sccl_id < 0) { dev_err(&pdev->dev, "Cannot read sccl-id!\n"); return -EINVAL; } - if (device_property_read_u32(&pdev->dev, "hisilicon,idx-id", - &sllc_pmu->topo.index_id)) { + if (sllc_pmu->topo.index_id < 0) { dev_err(&pdev->dev, "Cannot read idx-id!\n"); return -EINVAL; } - /* SLLC PMUs only share the same SCCL */ - sllc_pmu->topo.ccl_id = -1; - sllc_pmu->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(sllc_pmu->base)) { dev_err(&pdev->dev, "ioremap failed for sllc_pmu resource.\n"); diff --git a/drivers/perf/hisilicon/hisi_uncore_uc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_uc_pmu.c index bc51d45c8ef9..ba35c9476340 100644 --- a/drivers/perf/hisilicon/hisi_uncore_uc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_uc_pmu.c @@ -11,7 +11,6 @@ #include <linux/irq.h> #include <linux/list.h> #include <linux/mod_devicetable.h> -#include <linux/property.h> #include "hisi_uncore_pmu.h" @@ -366,25 +365,24 @@ static void hisi_uc_pmu_clear_int_status(struct hisi_pmu *uc_pmu, int idx) static int hisi_uc_pmu_init_data(struct platform_device *pdev, struct hisi_pmu *uc_pmu) { + hisi_uncore_pmu_init_topology(uc_pmu, &pdev->dev); + /* * Use SCCL (Super CPU Cluster) ID and CCL (CPU Cluster) ID to * identify the topology information of UC PMU devices in the chip. * They have some CCLs per SCCL and then 4 UC PMU per CCL. */ - if (device_property_read_u32(&pdev->dev, "hisilicon,scl-id", - &uc_pmu->topo.sccl_id)) { + if (uc_pmu->topo.sccl_id < 0) { dev_err(&pdev->dev, "Can not read uc sccl-id!\n"); return -EINVAL; } - if (device_property_read_u32(&pdev->dev, "hisilicon,ccl-id", - &uc_pmu->topo.ccl_id)) { + if (uc_pmu->topo.ccl_id < 0) { dev_err(&pdev->dev, "Can not read uc ccl-id!\n"); return -EINVAL; } - if (device_property_read_u32(&pdev->dev, "hisilicon,sub-id", - &uc_pmu->topo.sub_id)) { + if (uc_pmu->topo.sub_id < 0) { dev_err(&pdev->dev, "Can not read sub-id!\n"); return -EINVAL; } -- 2.33.0