tree: https://gitee.com/openeuler/kernel.git OLK-6.6 head: 09d0a2e6b14e15a741ad6b479c7dced36608a9ff commit: 381994c39e251eeb2cecf06200ff200fdd5e06ff [2666/2666] usb: dwc3: core: Prevent phy suspend during init config: x86_64-buildonly-randconfig-2004-20250811 (https://download.01.org/0day-ci/archive/20250811/202508111054.kROi2W5N-lkp@i...) compiler: clang version 20.1.8 (https://github.com/llvm/llvm-project 87f0227cb60147a26a1eeb4fb06e3b505e9c7261) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250811/202508111054.kROi2W5N-lkp@i...) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202508111054.kROi2W5N-lkp@intel.com/ All warnings (new ones prefixed by >>): In file included from drivers/usb/dwc3/core.c:24: In file included from include/linux/dma-mapping.h:11: In file included from include/linux/scatterlist.h:8: In file included from include/linux/mm.h:2235: include/linux/vmstat.h:522:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion] 522 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_" | ~~~~~~~~~~~ ^ ~~~
drivers/usb/dwc3/core.c:1174:16: warning: variable 'hw_mode' set but not used [-Wunused-but-set-variable] 1174 | unsigned int hw_mode; | ^ 2 warnings generated.
vim +/hw_mode +1174 drivers/usb/dwc3/core.c 0a0e16cf4375dc Stanley Chang 2023-12-03 1165 941f918ecfa757 Felipe Balbi 2016-10-14 1166 /** 941f918ecfa757 Felipe Balbi 2016-10-14 1167 * dwc3_core_init - Low-level initialization of DWC3 Core 941f918ecfa757 Felipe Balbi 2016-10-14 1168 * @dwc: Pointer to our controller context structure 941f918ecfa757 Felipe Balbi 2016-10-14 1169 * 941f918ecfa757 Felipe Balbi 2016-10-14 1170 * Returns 0 on success otherwise negative errno. 941f918ecfa757 Felipe Balbi 2016-10-14 1171 */ 941f918ecfa757 Felipe Balbi 2016-10-14 1172 static int dwc3_core_init(struct dwc3 *dwc) 941f918ecfa757 Felipe Balbi 2016-10-14 1173 { 9ba3aca8fe8231 Thinh Nguyen 2019-08-09 @1174 unsigned int hw_mode; 941f918ecfa757 Felipe Balbi 2016-10-14 1175 u32 reg; 941f918ecfa757 Felipe Balbi 2016-10-14 1176 int ret; 941f918ecfa757 Felipe Balbi 2016-10-14 1177 9ba3aca8fe8231 Thinh Nguyen 2019-08-09 1178 hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); 9ba3aca8fe8231 Thinh Nguyen 2019-08-09 1179 941f918ecfa757 Felipe Balbi 2016-10-14 1180 /* 941f918ecfa757 Felipe Balbi 2016-10-14 1181 * Write Linux Version Code to our GUID register so it's easy to figure 941f918ecfa757 Felipe Balbi 2016-10-14 1182 * out which kernel version a bug was found. 941f918ecfa757 Felipe Balbi 2016-10-14 1183 */ 941f918ecfa757 Felipe Balbi 2016-10-14 1184 dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE); 941f918ecfa757 Felipe Balbi 2016-10-14 1185 98112041bcca16 Roger Quadros 2018-02-12 1186 ret = dwc3_phy_setup(dwc); 941f918ecfa757 Felipe Balbi 2016-10-14 1187 if (ret) d2f197822d5807 Johan Hovold 2023-04-04 1188 return ret; 941f918ecfa757 Felipe Balbi 2016-10-14 1189 98112041bcca16 Roger Quadros 2018-02-12 1190 if (!dwc->ulpi_ready) { 98112041bcca16 Roger Quadros 2018-02-12 1191 ret = dwc3_core_ulpi_init(dwc); 63130462c919ec Ferry Toth 2022-12-05 1192 if (ret) { 63130462c919ec Ferry Toth 2022-12-05 1193 if (ret == -ETIMEDOUT) { 63130462c919ec Ferry Toth 2022-12-05 1194 dwc3_core_soft_reset(dwc); 63130462c919ec Ferry Toth 2022-12-05 1195 ret = -EPROBE_DEFER; 63130462c919ec Ferry Toth 2022-12-05 1196 } d2f197822d5807 Johan Hovold 2023-04-04 1197 return ret; 63130462c919ec Ferry Toth 2022-12-05 1198 } 98112041bcca16 Roger Quadros 2018-02-12 1199 dwc->ulpi_ready = true; 98112041bcca16 Roger Quadros 2018-02-12 1200 } 4878a02898bab1 Sebastian Andrzej Siewior 2011-10-31 1201 98112041bcca16 Roger Quadros 2018-02-12 1202 if (!dwc->phys_ready) { 98112041bcca16 Roger Quadros 2018-02-12 1203 ret = dwc3_core_get_phy(dwc); f54edb539c1167 Felipe Balbi 2017-06-05 1204 if (ret) d2f197822d5807 Johan Hovold 2023-04-04 1205 goto err_exit_ulpi; 98112041bcca16 Roger Quadros 2018-02-12 1206 dwc->phys_ready = true; 98112041bcca16 Roger Quadros 2018-02-12 1207 } 98112041bcca16 Roger Quadros 2018-02-12 1208 1d72fab476567a Johan Hovold 2023-04-04 1209 ret = dwc3_phy_init(dwc); 1d72fab476567a Johan Hovold 2023-04-04 1210 if (ret) 1d72fab476567a Johan Hovold 2023-04-04 1211 goto err_exit_ulpi; 8cfac9a6744fcb Li Jun 2021-09-08 1212 98112041bcca16 Roger Quadros 2018-02-12 1213 ret = dwc3_core_soft_reset(dwc); 98112041bcca16 Roger Quadros 2018-02-12 1214 if (ret) 1d72fab476567a Johan Hovold 2023-04-04 1215 goto err_exit_phy; f54edb539c1167 Felipe Balbi 2017-06-05 1216 941f918ecfa757 Felipe Balbi 2016-10-14 1217 dwc3_core_setup_global_control(dwc); c499ff71ff2a28 Felipe Balbi 2016-05-16 1218 dwc3_core_num_eps(dwc); 0ffcaf3798bfd8 Felipe Balbi 2013-12-19 1219 3497b9a5c8c3d4 Li Jun 2022-06-07 1220 /* Set power down scale of suspend_clk */ 3497b9a5c8c3d4 Li Jun 2022-06-07 1221 dwc3_set_power_down_clk_scale(dwc); 3497b9a5c8c3d4 Li Jun 2022-06-07 1222 c499ff71ff2a28 Felipe Balbi 2016-05-16 1223 /* Adjust Frame Length */ c499ff71ff2a28 Felipe Balbi 2016-05-16 1224 dwc3_frame_length_adjustment(dwc); c499ff71ff2a28 Felipe Balbi 2016-05-16 1225 7bee3188388901 Balaji Prakash J 2021-08-31 1226 /* Adjust Reference Clock Period */ 7bee3188388901 Balaji Prakash J 2021-08-31 1227 dwc3_ref_clk_period(dwc); 7bee3188388901 Balaji Prakash J 2021-08-31 1228 d9612c2f0449e2 Pengbo Mu 2018-07-23 1229 dwc3_set_incr_burst_type(dwc); d9612c2f0449e2 Pengbo Mu 2018-07-23 1230 8018018d9c5647 Dan Carpenter 2023-05-04 1231 ret = dwc3_phy_power_on(dwc); 1d72fab476567a Johan Hovold 2023-04-04 1232 if (ret) 1d72fab476567a Johan Hovold 2023-04-04 1233 goto err_exit_phy; c499ff71ff2a28 Felipe Balbi 2016-05-16 1234 c499ff71ff2a28 Felipe Balbi 2016-05-16 1235 ret = dwc3_event_buffers_setup(dwc); c499ff71ff2a28 Felipe Balbi 2016-05-16 1236 if (ret) { c499ff71ff2a28 Felipe Balbi 2016-05-16 1237 dev_err(dwc->dev, "failed to setup event buffers\n"); 1d72fab476567a Johan Hovold 2023-04-04 1238 goto err_power_off_phy; c499ff71ff2a28 Felipe Balbi 2016-05-16 1239 } c499ff71ff2a28 Felipe Balbi 2016-05-16 1240 06281d460fc5d8 John Youn 2016-08-22 1241 /* 06281d460fc5d8 John Youn 2016-08-22 1242 * ENDXFER polling is available on version 3.10a and later of 06281d460fc5d8 John Youn 2016-08-22 1243 * the DWC_usb3 controller. It is NOT available in the 06281d460fc5d8 John Youn 2016-08-22 1244 * DWC_usb31 controller. 06281d460fc5d8 John Youn 2016-08-22 1245 */ 9af21dd6faeba5 Thinh Nguyen 2020-04-11 1246 if (DWC3_VER_IS_WITHIN(DWC3, 310A, ANY)) { 06281d460fc5d8 John Youn 2016-08-22 1247 reg = dwc3_readl(dwc->regs, DWC3_GUCTL2); 06281d460fc5d8 John Youn 2016-08-22 1248 reg |= DWC3_GUCTL2_RST_ACTBITLATER; 06281d460fc5d8 John Youn 2016-08-22 1249 dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); 06281d460fc5d8 John Youn 2016-08-22 1250 } 06281d460fc5d8 John Youn 2016-08-22 1251 63d7f9810a3810 Piyush Mehta 2022-09-20 1252 /* 63d7f9810a3810 Piyush Mehta 2022-09-20 1253 * When configured in HOST mode, after issuing U3/L2 exit controller 63d7f9810a3810 Piyush Mehta 2022-09-20 1254 * fails to send proper CRC checksum in CRC5 feild. Because of this 63d7f9810a3810 Piyush Mehta 2022-09-20 1255 * behaviour Transaction Error is generated, resulting in reset and 63d7f9810a3810 Piyush Mehta 2022-09-20 1256 * re-enumeration of usb device attached. All the termsel, xcvrsel, 63d7f9810a3810 Piyush Mehta 2022-09-20 1257 * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1 63d7f9810a3810 Piyush Mehta 2022-09-20 1258 * will correct this problem. This option is to support certain 63d7f9810a3810 Piyush Mehta 2022-09-20 1259 * legacy ULPI PHYs. 63d7f9810a3810 Piyush Mehta 2022-09-20 1260 */ 63d7f9810a3810 Piyush Mehta 2022-09-20 1261 if (dwc->resume_hs_terminations) { 63d7f9810a3810 Piyush Mehta 2022-09-20 1262 reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); 63d7f9810a3810 Piyush Mehta 2022-09-20 1263 reg |= DWC3_GUCTL1_RESUME_OPMODE_HS_HOST; 63d7f9810a3810 Piyush Mehta 2022-09-20 1264 dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); 63d7f9810a3810 Piyush Mehta 2022-09-20 1265 } 63d7f9810a3810 Piyush Mehta 2022-09-20 1266 9af21dd6faeba5 Thinh Nguyen 2020-04-11 1267 if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) { 65db7a0c981637 William Wu 2017-04-19 1268 reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); 65db7a0c981637 William Wu 2017-04-19 1269 0bb39ca1ad8758 John Youn 2016-10-12 1270 /* 65db7a0c981637 William Wu 2017-04-19 1271 * Enable hardware control of sending remote wakeup 65db7a0c981637 William Wu 2017-04-19 1272 * in HS when the device is in the L1 state. 0bb39ca1ad8758 John Youn 2016-10-12 1273 */ 9af21dd6faeba5 Thinh Nguyen 2020-04-11 1274 if (!DWC3_VER_IS_PRIOR(DWC3, 290A)) 0bb39ca1ad8758 John Youn 2016-10-12 1275 reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW; 65db7a0c981637 William Wu 2017-04-19 1276 843714bb37d9a3 Jack Pham 2021-08-12 1277 /* 843714bb37d9a3 Jack Pham 2021-08-12 1278 * Decouple USB 2.0 L1 & L2 events which will allow for 843714bb37d9a3 Jack Pham 2021-08-12 1279 * gadget driver to only receive U3/L2 suspend & wakeup 843714bb37d9a3 Jack Pham 2021-08-12 1280 * events and prevent the more frequent L1 LPM transitions 843714bb37d9a3 Jack Pham 2021-08-12 1281 * from interrupting the driver. 843714bb37d9a3 Jack Pham 2021-08-12 1282 */ 843714bb37d9a3 Jack Pham 2021-08-12 1283 if (!DWC3_VER_IS_PRIOR(DWC3, 300A)) 843714bb37d9a3 Jack Pham 2021-08-12 1284 reg |= DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT; 843714bb37d9a3 Jack Pham 2021-08-12 1285 65db7a0c981637 William Wu 2017-04-19 1286 if (dwc->dis_tx_ipgap_linecheck_quirk) 65db7a0c981637 William Wu 2017-04-19 1287 reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS; 65db7a0c981637 William Wu 2017-04-19 1288 7ba6b09fda5e0c Neil Armstrong 2020-02-21 1289 if (dwc->parkmode_disable_ss_quirk) 7ba6b09fda5e0c Neil Armstrong 2020-02-21 1290 reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS; 7ba6b09fda5e0c Neil Armstrong 2020-02-21 1291 d21a797a3eeb2b Stanley Chang 2023-04-19 1292 if (dwc->parkmode_disable_hs_quirk) d21a797a3eeb2b Stanley Chang 2023-04-19 1293 reg |= DWC3_GUCTL1_PARKMODE_DISABLE_HS; d21a797a3eeb2b Stanley Chang 2023-04-19 1294 62b20e6e0dde8d Bin Yang 2022-02-28 1295 if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) && 62b20e6e0dde8d Bin Yang 2022-02-28 1296 (dwc->maximum_speed == USB_SPEED_HIGH || 62b20e6e0dde8d Bin Yang 2022-02-28 1297 dwc->maximum_speed == USB_SPEED_FULL)) 62b20e6e0dde8d Bin Yang 2022-02-28 1298 reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK; 62b20e6e0dde8d Bin Yang 2022-02-28 1299 0bb39ca1ad8758 John Youn 2016-10-12 1300 dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); 0bb39ca1ad8758 John Youn 2016-10-12 1301 } 0bb39ca1ad8758 John Youn 2016-10-12 1302 0a0e16cf4375dc Stanley Chang 2023-12-03 1303 dwc3_config_threshold(dwc); 938a5ad1d3055c Thinh Nguyen 2018-03-16 1304 72246da40f3719 Felipe Balbi 2011-08-19 1305 return 0; 72246da40f3719 Felipe Balbi 2011-08-19 1306 1d72fab476567a Johan Hovold 2023-04-04 1307 err_power_off_phy: 1d72fab476567a Johan Hovold 2023-04-04 1308 dwc3_phy_power_off(dwc); 1d72fab476567a Johan Hovold 2023-04-04 1309 err_exit_phy: 1d72fab476567a Johan Hovold 2023-04-04 1310 dwc3_phy_exit(dwc); d2f197822d5807 Johan Hovold 2023-04-04 1311 err_exit_ulpi: 98112041bcca16 Roger Quadros 2018-02-12 1312 dwc3_ulpi_exit(dwc); 98112041bcca16 Roger Quadros 2018-02-12 1313 72246da40f3719 Felipe Balbi 2011-08-19 1314 return ret; 72246da40f3719 Felipe Balbi 2011-08-19 1315 } 72246da40f3719 Felipe Balbi 2011-08-19 1316 :::::: The code at line 1174 was first introduced by commit :::::: 9ba3aca8fe82318805709036bd50bee64570088b usb: dwc3: Disable phy suspend after power-on reset :::::: TO: Thinh Nguyen <Thinh.Nguyen@synopsys.com> :::::: CC: Felipe Balbi <felipe.balbi@linux.intel.com> -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki