From: Vladimir Oltean <vladimir.oltean@nxp.com> mainline inclusion from mainline-v5.17-rc4 commit bd488afc3b39e045ba71aab472233f2a78726e7b category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IADFY0 CVE: CVE-2022-48814 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Seville VSC9959 switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the seville switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The seville driver has a code structure that could accommodate both the mdiobus_unregister and mdiobus_free calls, but it has an external dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls devm_mdiobus_alloc_size() on its behalf. So rather than restructuring that, and exporting yet one more symbol mscc_miim_teardown(), let's work with devres and replace of_mdiobus_register with the devres variant. When we use all-devres, we can ensure that devres doesn't free a still-registered bus (it either runs both callbacks, or none). Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Conflicts: drivers/net/dsa/ocelot/seville_vsc9953.c [The conflict occurs because the commit 5186c4a05b97("net: dsa: ocelot: seville: utilize of_mdiobus_register") is not merged] Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> --- drivers/net/dsa/ocelot/seville_vsc9953.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c index 7026523f886c..81875e96096b 100644 --- a/drivers/net/dsa/ocelot/seville_vsc9953.c +++ b/drivers/net/dsa/ocelot/seville_vsc9953.c @@ -1092,7 +1092,7 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot) snprintf(bus->id, MII_BUS_ID_SIZE, "%s-imdio", dev_name(dev)); /* Needed in order to initialize the bus mutex lock */ - rc = mdiobus_register(bus); + rc = devm_mdiobus_register(dev, bus); if (rc < 0) { dev_err(dev, "failed to register MDIO bus\n"); return rc; @@ -1144,7 +1144,8 @@ static void vsc9953_mdio_bus_free(struct ocelot *ocelot) mdio_device_free(pcs->mdio); lynx_pcs_destroy(pcs); } - mdiobus_unregister(felix->imdio); + + /* mdiobus_unregister and mdiobus_free handled by devres */ } static void vsc9953_xmit_template_populate(struct ocelot *ocelot, int port) -- 2.34.1