From: Rikard Falkeborn <rikard.falkeborn@gmail.com> [ Upstream commit ee25d9742dabed3fd18158b518f846abeb70f319 ] round_down() can only round to powers of 2. If round_down() is asked to round to something that is not a power of 2, incorrect results are produced. The incorrect results can be both too large and too small. Instead, use rounddown() which can round to any number. Fixes: 6a721db180a2 ("clk: sunxi: Add A31 clocks support") Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/clk/sunxi/clk-sunxi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 19ad33c97d6d..1a802972e9a9 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -98,7 +98,7 @@ static void sun6i_a31_get_pll1_factors(struct factors_request *req) * Round down the frequency to the closest multiple of either * 6 or 16 */ - u32 round_freq_6 = round_down(freq_mhz, 6); + u32 round_freq_6 = rounddown(freq_mhz, 6); u32 round_freq_16 = round_down(freq_mhz, 16); if (round_freq_6 > round_freq_16) -- 2.25.1

From: Adam Honse <calcprogrammer1@gmail.com> [ Upstream commit f27237c174fd9653033330e4e532cd9d153ce824 ] The AMD X370 and other AM4 chipsets (A/B/X 3/4/5 parts) and Threadripper equivalents have a secondary SMBus controller at I/O port address 0x0B20. This bus is used by several manufacturers to control motherboard RGB lighting via embedded controllers. I have been using this bus in my OpenRGB project to control the Aura RGB on many motherboards and ASRock also uses this bus for their Polychrome RGB controller. I am not aware of any CZ-compatible platforms which do not have the second SMBus channel. All of AMD's AM4- and Threadripper- series chipsets that OpenRGB users have tested appear to have this secondary bus. I also noticed this secondary bus is present on older AMD platforms including my FM1 home server. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202587 Signed-off-by: Adam Honse <calcprogrammer1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/i2c/busses/i2c-piix4.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 279bbacf1d45..ca3a30802185 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -965,7 +965,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) } if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) { + (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS || + dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)) { retval = piix4_setup_sb800(dev, id, 1); } -- 2.25.1

From: Alex Elder <elder@linaro.org> [ Upstream commit 6442df49400b466431979e7634849a464a5f1861 ] If ida_simple_get() returns an error when called in rproc_alloc(), put_device() is called to clean things up. By this time the rproc device type has been assigned, with rproc_type_release() as the release function. The first thing rproc_type_release() does is call: idr_destroy(&rproc->notifyids); But at the time the ida_simple_get() call is made, the notifyids field in the remoteproc structure has not been initialized. I'm not actually sure this case causes an observable problem, but it's incorrect. Fix this by initializing the notifyids field before calling ida_simple_get() in rproc_alloc(). Fixes: b5ab5e24e960 ("remoteproc: maintain a generic child device for each rproc") Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suman Anna <s-anna@ti.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200415204858.2448-2-mathieu.poirier@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/remoteproc/remoteproc_core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index d5ff272fde34..e48069db1703 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -1598,6 +1598,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, rproc->dev.type = &rproc_type; rproc->dev.class = &rproc_class; rproc->dev.driver_data = rproc; + idr_init(&rproc->notifyids); /* Assign a unique device index and name */ rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL); @@ -1622,8 +1623,6 @@ struct rproc *rproc_alloc(struct device *dev, const char *name, mutex_init(&rproc->lock); - idr_init(&rproc->notifyids); - INIT_LIST_HEAD(&rproc->carveouts); INIT_LIST_HEAD(&rproc->mappings); INIT_LIST_HEAD(&rproc->traces); -- 2.25.1

From: Jon Hunter <jonathanh@nvidia.com> [ Upstream commit d8207c155a7c6015eb7f43739baa7dfb1fa638af ] If probing the LP885x backlight fails after the regulators have been enabled, then the following warning is seen when releasing the regulators ... WARNING: CPU: 1 PID: 289 at drivers/regulator/core.c:2051 _regulator_put.part.28+0x158/0x160 Modules linked in: tegra_xudc lp855x_bl(+) host1x pwm_tegra ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 1 PID: 289 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200224 #1 Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) ... Call trace: _regulator_put.part.28+0x158/0x160 regulator_put+0x34/0x50 devm_regulator_release+0x10/0x18 release_nodes+0x12c/0x230 devres_release_all+0x34/0x50 really_probe+0x1c0/0x370 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x78 __driver_attach+0xb0/0xf0 bus_for_each_dev+0x68/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x160/0x1f0 driver_register+0x60/0x110 i2c_register_driver+0x40/0x80 lp855x_driver_init+0x20/0x1000 [lp855x_bl] do_one_initcall+0x58/0x1a0 do_init_module+0x54/0x1d0 load_module+0x1d80/0x21c8 __do_sys_finit_module+0xe8/0x100 __arm64_sys_finit_module+0x18/0x20 el0_svc_common.constprop.3+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xf4/0x1b0 el0_sync+0x140/0x180 Fix this by ensuring that the regulators are disabled, if enabled, on probe failure. Finally, ensure that the vddio regulator is disabled in the driver remove handler. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/video/backlight/lp855x_bl.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c index 73612485ed07..bd43d8cff389 100644 --- a/drivers/video/backlight/lp855x_bl.c +++ b/drivers/video/backlight/lp855x_bl.c @@ -460,7 +460,7 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) ret = regulator_enable(lp->enable); if (ret < 0) { dev_err(lp->dev, "failed to enable vddio: %d\n", ret); - return ret; + goto disable_supply; } /* @@ -475,24 +475,34 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) ret = lp855x_configure(lp); if (ret) { dev_err(lp->dev, "device config err: %d", ret); - return ret; + goto disable_vddio; } ret = lp855x_backlight_register(lp); if (ret) { dev_err(lp->dev, "failed to register backlight. err: %d\n", ret); - return ret; + goto disable_vddio; } ret = sysfs_create_group(&lp->dev->kobj, &lp855x_attr_group); if (ret) { dev_err(lp->dev, "failed to register sysfs. err: %d\n", ret); - return ret; + goto disable_vddio; } backlight_update_status(lp->bl); + return 0; + +disable_vddio: + if (lp->enable) + regulator_disable(lp->enable); +disable_supply: + if (lp->supply) + regulator_disable(lp->supply); + + return ret; } static int lp855x_remove(struct i2c_client *cl) @@ -501,6 +511,8 @@ static int lp855x_remove(struct i2c_client *cl) lp->bl->props.brightness = 0; backlight_update_status(lp->bl); + if (lp->enable) + regulator_disable(lp->enable); if (lp->supply) regulator_disable(lp->supply); sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group); -- 2.25.1

From: Linus Walleij <linus.walleij@linaro.org> [ Upstream commit d2854bbe5f5c4b4bec8061caf4f2e603d8819446 ] The CMA and DMA_CMA Kconfig options need to be selected by the Integrator in order to produce boot console on some Integrator systems. The REGULATOR and REGULATOR_FIXED_VOLTAGE need to be selected in order to boot the system from an external MMC card when using MMCI/PL181 from the device tree probe path. Select these things directly from the Kconfig so we are sure to be able to bring the systems up with console from any device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/arm/mach-integrator/Kconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index cefe44f6889b..ba124f8704fa 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -3,6 +3,8 @@ menuconfig ARCH_INTEGRATOR depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA select COMMON_CLK_VERSATILE + select CMA + select DMA_CMA select HAVE_TCM select ICST select MFD_SYSCON @@ -34,14 +36,13 @@ config INTEGRATOR_IMPD1 select ARM_VIC select GPIO_PL061 select GPIOLIB + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help The IM-PD1 is an add-on logic module for the Integrator which allows ARM(R) Ltd PrimeCells to be developed and evaluated. The IM-PD1 can be found on the Integrator/PP2 platform. - To compile this driver as a module, choose M here: the - module will be called impd1. - config INTEGRATOR_CM7TDMI bool "Integrator/CM7TDMI core module" depends on ARCH_INTEGRATOR_AP -- 2.25.1

From: Kai-Heng Feng <kai.heng.feng@canonical.com> [ Upstream commit dbd13179780555ecd3c992dea1222ca31920e892 ] Currently mute LED and micmute LED share the same GPIO polarity. So split the polarity for mute and micmute, in case they have different polarities. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200430083255.5093-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- sound/pci/hda/patch_realtek.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b4f802013f74..623ebe2e7db4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -94,6 +94,7 @@ struct alc_spec { /* mute LED for HP laptops, see alc269_fixup_mic_mute_hook() */ int mute_led_polarity; + int micmute_led_polarity; hda_nid_t mute_led_nid; hda_nid_t cap_mute_led_nid; @@ -3862,11 +3863,9 @@ static void alc269_fixup_hp_mute_led_mic3(struct hda_codec *codec, /* update LED status via GPIO */ static void alc_update_gpio_led(struct hda_codec *codec, unsigned int mask, - bool enabled) + int polarity, bool enabled) { - struct alc_spec *spec = codec->spec; - - if (spec->mute_led_polarity) + if (polarity) enabled = !enabled; alc_update_gpio_data(codec, mask, !enabled); /* muted -> LED on */ } @@ -3877,7 +3876,8 @@ static void alc_fixup_gpio_mute_hook(void *private_data, int enabled) struct hda_codec *codec = private_data; struct alc_spec *spec = codec->spec; - alc_update_gpio_led(codec, spec->gpio_mute_led_mask, enabled); + alc_update_gpio_led(codec, spec->gpio_mute_led_mask, + spec->mute_led_polarity, enabled); } /* turn on/off mic-mute LED via GPIO per capture hook */ @@ -3886,6 +3886,7 @@ static void alc_gpio_micmute_update(struct hda_codec *codec) struct alc_spec *spec = codec->spec; alc_update_gpio_led(codec, spec->gpio_mic_led_mask, + spec->micmute_led_polarity, spec->gen.micmute_led.led_value); } @@ -5476,7 +5477,8 @@ static void alc280_hp_gpio4_automute_hook(struct hda_codec *codec, snd_hda_gen_hp_automute(codec, jack); /* mute_led_polarity is set to 0, so we pass inverted value here */ - alc_update_gpio_led(codec, 0x10, !spec->gen.hp_jack_present); + alc_update_gpio_led(codec, 0x10, spec->mute_led_polarity, + !spec->gen.hp_jack_present); } /* Manage GPIOs for HP EliteBook Folio 9480m. -- 2.25.1

From: Ard Biesheuvel <ardb@kernel.org> [ Upstream commit d09ddd8190fbdc07696bf34b548ae15aa1816714 ] When resizing a BAR, pci_reassign_bridge_resources() is invoked to bring the bridge windows of parent bridges in line with the new BAR assignment. This assumes the device whose BAR is being resized lives on a subordinate bus, but this is not necessarily the case. A device may live on the root bus, in which case dev->bus->self is NULL, and passing a NULL pci_dev pointer to pci_reassign_bridge_resources() will cause it to crash. So let's make the call to pci_reassign_bridge_resources() conditional on whether dev->bus->self is non-NULL in the first place. Fixes: 8bb705e3e79d84e7 ("PCI: Add pci_resize_resource() for resizing BARs") Link: https://lore.kernel.org/r/20200421162256.26887-1-ardb@kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/pci/setup-res.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index d8ca40a97693..d21fa04fa44d 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -439,10 +439,11 @@ int pci_resize_resource(struct pci_dev *dev, int resno, int size) res->end = res->start + pci_rebar_size_to_bytes(size) - 1; /* Check if the new config works by trying to assign everything. */ - ret = pci_reassign_bridge_resources(dev->bus->self, res->flags); - if (ret) - goto error_resize; - + if (dev->bus->self) { + ret = pci_reassign_bridge_resources(dev->bus->self, res->flags); + if (ret) + goto error_resize; + } return 0; error_resize: -- 2.25.1

From: Andreas Klinger <ak@it-klinger.de> [ Upstream commit dee2dabc0e4115b80945fe2c91603e634f4b4686 ] Limit the output of humidity compensation to the range between 0 and 100 percent. Depending on the calibration parameters of the individual sensor it happens, that a humidity above 100 percent or below 0 percent is calculated, which don't make sense in terms of relative humidity. Add a clamp to the compensation formula as described in the datasheet of the sensor in chapter 4.2.3. Although this clamp is documented, it was never in the driver of the kernel. It depends on the circumstances (calibration parameters, temperature, humidity) if one can see a value above 100 percent without the clamp. The writer of this patch was working with this type of sensor without noting this error. So it seems to be a rare event when this bug occures. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/iio/pressure/bmp280-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index d47922a1d0f3..074f6f865008 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -261,6 +261,8 @@ static u32 bmp280_compensate_humidity(struct bmp280_data *data, + (s32)2097152) * calib->H2 + 8192) >> 14); var -= ((((var >> 15) * (var >> 15)) >> 7) * (s32)calib->H1) >> 4; + var = clamp_val(var, 0, 419430400); + return var >> 12; }; -- 2.25.1

From: Russell King <rmk+kernel@armlinux.org.uk> [ Upstream commit e81c979f4e071d516aa27cf5a0c3939da00dc1ca ] If we timeout during a message transfer, the control register may contain bits that cause an action to be set. Read-modify-writing the register leaving these bits set may trigger the hardware to attempt one of these actions unintentionally. Always clear these bits when cleaning up after a message or after a timeout. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/i2c/busses/i2c-pxa.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index fbf91d383b40..7248ba6763e4 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -709,11 +709,9 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) { u32 icr; - /* - * Clear the STOP and ACK flags - */ + /* Clear the START, STOP, ACK, TB and MA flags */ icr = readl(_ICR(i2c)); - icr &= ~(ICR_STOP | ICR_ACKNAK); + icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA); writel(icr, _ICR(i2c)); } -- 2.25.1

From: Oliver Neukum <oneukum@suse.com> [ Upstream commit 296a193b06120aa6ae7cf5c0d7b5e5b55968026e ] syzkaller reported an URB that should have been killed to be active. We do not understand it, but this should fix the issue if it is real. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200507085806.5793-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/usb/class/usblp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 4a80103675d5..419804c9c974 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -468,7 +468,8 @@ static int usblp_release(struct inode *inode, struct file *file) usb_autopm_put_interface(usblp->intf); if (!usblp->present) /* finish cleanup from disconnect */ - usblp_cleanup(usblp); + usblp_cleanup(usblp); /* any URBs must be dead */ + mutex_unlock(&usblp_mutex); return 0; } @@ -1375,9 +1376,11 @@ static void usblp_disconnect(struct usb_interface *intf) usblp_unlink_urbs(usblp); mutex_unlock(&usblp->mut); + usb_poison_anchored_urbs(&usblp->urbs); if (!usblp->used) usblp_cleanup(usblp); + mutex_unlock(&usblp_mutex); } -- 2.25.1

From: Martin Wilck <mwilck@suse.com> [ Upstream commit 2361ae595352dec015d14292f1b539242d8446d6 ] SCSI LUN passthrough code such as qemu's "scsi-block" device model pass every IO to the host via SG_IO ioctls. Currently, dm-multipath calls choose_pgpath() only in the block IO code path, not in the ioctl code path (unless current_pgpath is NULL). This has the effect that no path switching and thus no load balancing is done for SCSI-passthrough IO, unless the active path fails. Fix this by using the same logic in multipath_prepare_ioctl() as in multipath_clone_and_map(). Note: The allegedly best path selection algorithm, service-time, still wouldn't work perfectly, because the io size of the current request is always set to 0. Changing that for the IO passthrough case would require the ioctl cmd and arg to be passed to dm's prepare_ioctl() method. Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/md/dm-mpath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 207ca0ad0b59..c1ad84f3414c 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1868,7 +1868,7 @@ static int multipath_prepare_ioctl(struct dm_target *ti, int r; current_pgpath = READ_ONCE(m->current_pgpath); - if (!current_pgpath) + if (!current_pgpath || !test_bit(MPATHF_QUEUE_IO, &m->flags)) current_pgpath = choose_pgpath(m, 0); if (current_pgpath) { -- 2.25.1

From: Emmanuel Nicolet <emmanuel.nicolet@gmail.com> [ Upstream commit 720bc316690bd27dea9d71510b50f0cd698ffc32 ] Since commit dcebd755926b ("block: use bio_for_each_bvec() to compute multi-page bvec count"), the kernel will bug_on on the PS3 because bio_split() is called with sectors == 0: kernel BUG at block/bio.c:1853! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash PREEMPT SMP NR_CPUS=8 NUMA PS3 Modules linked in: firewire_sbp2 rtc_ps3(+) soundcore ps3_gelic(+) \ ps3rom(+) firewire_core ps3vram(+) usb_common crc_itu_t CPU: 0 PID: 97 Comm: blkid Not tainted 5.3.0-rc4 #1 NIP: c00000000027d0d0 LR: c00000000027d0b0 CTR: 0000000000000000 REGS: c00000000135ae90 TRAP: 0700 Not tainted (5.3.0-rc4) MSR: 8000000000028032 <SF,EE,IR,DR,RI> CR: 44008240 XER: 20000000 IRQMASK: 0 GPR00: c000000000289368 c00000000135b120 c00000000084a500 c000000004ff8300 GPR04: 0000000000000c00 c000000004c905e0 c000000004c905e0 000000000000ffff GPR08: 0000000000000000 0000000000000001 0000000000000000 000000000000ffff GPR12: 0000000000000000 c0000000008ef000 000000000000003e 0000000000080001 GPR16: 0000000000000100 000000000000ffff 0000000000000000 0000000000000004 GPR20: c00000000062fd7e 0000000000000001 000000000000ffff 0000000000000080 GPR24: c000000000781788 c00000000135b350 0000000000000080 c000000004c905e0 GPR28: c00000000135b348 c000000004ff8300 0000000000000000 c000000004c90000 NIP [c00000000027d0d0] .bio_split+0x28/0xac LR [c00000000027d0b0] .bio_split+0x8/0xac Call Trace: [c00000000135b120] [c00000000027d130] .bio_split+0x88/0xac (unreliable) [c00000000135b1b0] [c000000000289368] .__blk_queue_split+0x11c/0x53c [c00000000135b2d0] [c00000000028f614] .blk_mq_make_request+0x80/0x7d4 [c00000000135b3d0] [c000000000283a8c] .generic_make_request+0x118/0x294 [c00000000135b4b0] [c000000000283d34] .submit_bio+0x12c/0x174 [c00000000135b580] [c000000000205a44] .mpage_bio_submit+0x3c/0x4c [c00000000135b600] [c000000000206184] .mpage_readpages+0xa4/0x184 [c00000000135b750] [c0000000001ff8fc] .blkdev_readpages+0x24/0x38 [c00000000135b7c0] [c0000000001589f0] .read_pages+0x6c/0x1a8 [c00000000135b8b0] [c000000000158c74] .__do_page_cache_readahead+0x118/0x184 [c00000000135b9b0] [c0000000001591a8] .force_page_cache_readahead+0xe4/0xe8 [c00000000135ba50] [c00000000014fc24] .generic_file_read_iter+0x1d8/0x830 [c00000000135bb50] [c0000000001ffadc] .blkdev_read_iter+0x40/0x5c [c00000000135bbc0] [c0000000001b9e00] .new_sync_read+0x144/0x1a0 [c00000000135bcd0] [c0000000001bc454] .vfs_read+0xa0/0x124 [c00000000135bd70] [c0000000001bc7a4] .ksys_read+0x70/0xd8 [c00000000135be20] [c00000000000a524] system_call+0x5c/0x70 Instruction dump: 7fe3fb78 482e30dc 7c0802a6 482e3085 7c9e2378 f821ff71 7ca42b78 7d3e00d0 7c7d1b78 79290fe0 7cc53378 69290001 <0b090000> 81230028 7bca0020 7929ba62 [ end trace 313fec760f30aa1f ]--- The problem originates from setting the segment boundary of the request queue to -1UL. This makes get_max_segment_size() return zero when offset is zero, whatever the max segment size. The test with BLK_SEG_BOUNDARY_MASK fails and 'mask - (mask & offset) + 1' overflows to zero in the return statement. Not setting the segment boundary and using the default value (BLK_SEG_BOUNDARY_MASK) fixes the problem. Signed-off-by: Emmanuel Nicolet <emmanuel.nicolet@gmail.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/060a416c43138f45105c0540eff1a45539f7e2fc.158904925... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/block/ps3disk.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index afe1508d82c6..bd1c66f5631a 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -466,7 +466,6 @@ static int ps3disk_probe(struct ps3_system_bus_device *_dev) queue->queuedata = dev; blk_queue_max_hw_sectors(queue, dev->bounce_size >> 9); - blk_queue_segment_boundary(queue, -1UL); blk_queue_dma_alignment(queue, dev->blk_size-1); blk_queue_logical_block_size(queue, dev->blk_size); -- 2.25.1

From: Aharon Landau <aharonl@mellanox.com> [ Upstream commit 819f7427bafd494ef7ca4942ec6322db20722d7b ] Missing INIT2INIT entry in the list of modify commands caused DEVX applications to be unable to modify_qp for this transition state. Add the MLX5_CMD_OP_INIT2INIT_QP opcode to the list of allowed DEVX opcodes. Fixes: e662e14d801b ("IB/mlx5: Add DEVX support for modify and query commands") Link: https://lore.kernel.org/r/20200513095550.211345-1-leon@kernel.org Signed-off-by: Aharon Landau <aharonl@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/infiniband/hw/mlx5/devx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c index 02f36ab72ad4..4c90a007e09d 100644 --- a/drivers/infiniband/hw/mlx5/devx.c +++ b/drivers/infiniband/hw/mlx5/devx.c @@ -328,6 +328,7 @@ static bool devx_is_obj_modify_cmd(const void *in) case MLX5_CMD_OP_SET_L2_TABLE_ENTRY: case MLX5_CMD_OP_RST2INIT_QP: case MLX5_CMD_OP_INIT2RTR_QP: + case MLX5_CMD_OP_INIT2INIT_QP: case MLX5_CMD_OP_RTR2RTS_QP: case MLX5_CMD_OP_RTS2RTS_QP: case MLX5_CMD_OP_SQERR2RTS_QP: -- 2.25.1

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [ Upstream commit 494a94e38dcf62543a32a4424d646ff80b4b28bd ] Add missed acpi_gpiochip_free_interrupts() call when unregistering ports. While at it, drop extra check to call acpi_gpiochip_request_interrupts(). There is no need to have an additional check to call acpi_gpiochip_request_interrupts(). Even without any interrupts available the registered ACPI Event handlers can be useful for debugging purposes. Fixes: e6cb3486f5a1 ("gpio: dwapb: add gpio-signaled acpi event support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200519131233.59032-1-andriy.shevchenko@linux.int... Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/gpio/gpio-dwapb.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index 044888fd96a1..68db0033d158 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -535,26 +535,33 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio, dwapb_configure_irqs(gpio, port, pp); err = gpiochip_add_data(&port->gc, port); - if (err) + if (err) { dev_err(gpio->dev, "failed to register gpiochip for port%d\n", port->idx); - else - port->is_registered = true; + return err; + } /* Add GPIO-signaled ACPI event support */ - if (pp->has_irq) - acpi_gpiochip_request_interrupts(&port->gc); + acpi_gpiochip_request_interrupts(&port->gc); - return err; + port->is_registered = true; + + return 0; } static void dwapb_gpio_unregister(struct dwapb_gpio *gpio) { unsigned int m; - for (m = 0; m < gpio->nr_ports; ++m) - if (gpio->ports[m].is_registered) - gpiochip_remove(&gpio->ports[m].gc); + for (m = 0; m < gpio->nr_ports; ++m) { + struct dwapb_gpio_port *port = &gpio->ports[m]; + + if (!port->is_registered) + continue; + + acpi_gpiochip_free_interrupts(&port->gc); + gpiochip_remove(&port->gc); + } } static struct dwapb_platform_data * -- 2.25.1

From: Xiyu Yang <xiyuyang19@fudan.edu.cn> [ Upstream commit 7217e6e694da3aae6d17db8a7f7460c8d4817ebf ] In order to create or activate a new node, lpfc_els_unsol_buffer() invokes lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), all of them will return a reference of the specified lpfc_nodelist object to "ndlp" with increased refcnt. When lpfc_els_unsol_buffer() returns, local variable "ndlp" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of lpfc_els_unsol_buffer(). When "ndlp" in DEV_LOSS, the function forgets to decrease the refcnt increased by lpfc_nlp_init() or lpfc_enable_node() or lpfc_nlp_get(), causing a refcnt leak. Fix this issue by calling lpfc_nlp_put() when "ndlp" in DEV_LOSS. Link: https://lore.kernel.org/r/1590416184-52592-1-git-send-email-xiyuyang19@fudan... Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/scsi/lpfc/lpfc_els.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 7398350b08b4..9032793c405e 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -7949,6 +7949,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, spin_lock_irq(shost->host_lock); if (ndlp->nlp_flag & NLP_IN_DEV_LOSS) { spin_unlock_irq(shost->host_lock); + if (newnode) + lpfc_nlp_put(ndlp); goto dropit; } spin_unlock_irq(shost->host_lock); -- 2.25.1

From: Kajol Jain <kjain@linux.ibm.com> [ Upstream commit b4ac18eead28611ff470d0f47a35c4e0ac080d9c ] Commit 2b206ee6b0df ("powerpc/perf/hv-24x7: Display change in counter values")' added to print _change_ in the counter value rather then raw value for 24x7 counters. Incase of transactions, the event count is set to 0 at the beginning of the transaction. It also sets the event's prev_count to the raw value at the time of initialization. Because of setting event count to 0, we are seeing some weird behaviour, whenever we run multiple 24x7 events at a time. For example: command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/, hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}" -C 0 -I 1000 sleep 100 1.000121704 120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 1.000121704 5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 2.000357733 8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 2.000357733 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 4.000641884 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ Getting these large values in case we do -I. As we are setting event_count to 0, for interval case, overall event_count is not coming in incremental order. As we may can get new delta lesser then previous count. Because of which when we print intervals, we are getting negative value which create these large values. This patch removes part where we set event_count to 0 in function 'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count to the raw value at the time of initialization to print change value. With this patch In power9 platform command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/, hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}" -C 0 -I 1000 sleep 100 1.000117685 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 1.000117685 1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 2.000349331 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 2.000349331 2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 3.000495900 131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 3.000495900 4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 4.000645920 204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ 4.000645920 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/ 4.284169997 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/ Suggested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200525104308.9814-2-kjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/powerpc/perf/hv-24x7.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c index 72238eedc360..2bb798918483 100644 --- a/arch/powerpc/perf/hv-24x7.c +++ b/arch/powerpc/perf/hv-24x7.c @@ -1413,16 +1413,6 @@ static void h_24x7_event_read(struct perf_event *event) h24x7hw = &get_cpu_var(hv_24x7_hw); h24x7hw->events[i] = event; put_cpu_var(h24x7hw); - /* - * Clear the event count so we can compute the _change_ - * in the 24x7 raw counter value at the end of the txn. - * - * Note that we could alternatively read the 24x7 value - * now and save its value in event->hw.prev_count. But - * that would require issuing a hcall, which would then - * defeat the purpose of using the txn interface. - */ - local64_set(&event->count, 0); } put_cpu_var(hv_24x7_reqb); -- 2.25.1

From: Jon Derrick <jonathan.derrick@intel.com> [ Upstream commit 3e5095eebe015d5a4d566aa5e03c8621add5f0a7 ] Versions of VMD with the Host Physical Address shadow register use this register to calculate the bus address offset needed to do guest passthrough of the domain. This register shadows the Host Physical Address registers including the resource type bits. After calculating the offset, the extra resource type bits lead to the VMD resources being over-provisioned at the front and under-provisioned at the back. Example: pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit] Expected: pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit] If other devices are mapped in the over-provisioned front, it could lead to resource conflict issues with VMD or those devices. Link: https://lore.kernel.org/r/20200528030240.16024-3-jonathan.derrick@intel.com Fixes: a1a30170138c9 ("PCI: vmd: Fix shadow offsets to reflect spec changes") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/pci/controller/vmd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index b52885020c85..c3ac7f094a39 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -617,9 +617,11 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) if (!membar2) return -ENOMEM; offset[0] = vmd->dev->resource[VMD_MEMBAR1].start - - readq(membar2 + MB2_SHADOW_OFFSET); + (readq(membar2 + MB2_SHADOW_OFFSET) & + PCI_BASE_ADDRESS_MEM_MASK); offset[1] = vmd->dev->resource[VMD_MEMBAR2].start - - readq(membar2 + MB2_SHADOW_OFFSET + 8); + (readq(membar2 + MB2_SHADOW_OFFSET + 8) & + PCI_BASE_ADDRESS_MEM_MASK); pci_iounmap(vmd->dev, membar2); } } -- 2.25.1

From: Navid Emamdoost <navid.emamdoost@gmail.com> [ Upstream commit ca162ce98110b98e7d97b7157328d34dcfdd40a9 ] Even in failed case of pm_runtime_get_sync(), the usage_count is incremented. In order to keep the usage_count with correct value call appropriate pm_runtime_put(). Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/pwm/pwm-img.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c index 815f5333bb8f..da72b2866e88 100644 --- a/drivers/pwm/pwm-img.c +++ b/drivers/pwm/pwm-img.c @@ -132,8 +132,10 @@ static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, duty = DIV_ROUND_UP(timebase * duty_ns, period_ns); ret = pm_runtime_get_sync(chip->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_autosuspend(chip->dev); return ret; + } val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm)); @@ -334,8 +336,10 @@ static int img_pwm_remove(struct platform_device *pdev) int ret; ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(&pdev->dev); return ret; + } for (i = 0; i < pwm_chip->chip.npwm; i++) { val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG); -- 2.25.1

From: Logan Gunthorpe <logang@deltatee.com> [ Upstream commit ca93c45755da98302c93abdd788fc09113baf9e0 ] This commit fixes pingpong support for existing drivers that do not implement ntb_default_port_number() and ntb_default_peer_port_number(). This is required for hardware (like the crosslink topology of switchtec) which cannot assign reasonable port numbers to each port due to its perfect symmetry. Instead of picking the doorbell to use based on the the index of the peer, we use the peer's port number. This is a bit clearer and easier to understand. Fixes: c7aeb0afdcc2 ("NTB: ntb_pp: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/ntb/test/ntb_pingpong.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/ntb/test/ntb_pingpong.c b/drivers/ntb/test/ntb_pingpong.c index 65865e460ab8..18d00eec7b02 100644 --- a/drivers/ntb/test/ntb_pingpong.c +++ b/drivers/ntb/test/ntb_pingpong.c @@ -121,15 +121,14 @@ static int pp_find_next_peer(struct pp_ctx *pp) link = ntb_link_is_up(pp->ntb, NULL, NULL); /* Find next available peer */ - if (link & pp->nmask) { + if (link & pp->nmask) pidx = __ffs64(link & pp->nmask); - out_db = BIT_ULL(pidx + 1); - } else if (link & pp->pmask) { + else if (link & pp->pmask) pidx = __ffs64(link & pp->pmask); - out_db = BIT_ULL(pidx); - } else { + else return -ENODEV; - } + + out_db = BIT_ULL(ntb_peer_port_number(pp->ntb, pidx)); spin_lock(&pp->lock); pp->out_pidx = pidx; @@ -303,7 +302,7 @@ static void pp_init_flds(struct pp_ctx *pp) break; } - pp->in_db = BIT_ULL(pidx); + pp->in_db = BIT_ULL(lport); pp->pmask = GENMASK_ULL(pidx, 0) >> 1; pp->nmask = GENMASK_ULL(pcnt - 1, pidx); @@ -435,4 +434,3 @@ static void __exit pp_exit(void) debugfs_remove_recursive(pp_dbgfs_topdir); } module_exit(pp_exit); - -- 2.25.1

From: ashimida <ashimida@linux.alibaba.com> [ Upstream commit 72d24accf02add25e08733f0ecc93cf10fcbd88c ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, but all the symbols with the second letter 'L' in the kernel were filtered out, not just the symbols starting with 'dot + L'. For example: ashimida@ubuntu:~/linux$ cat System.map |grep ' .L' ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L' ffff0000088028e0 t bLength_show ...... ffff0000092e0408 b PLLP_OUTC_lock ffff0000092e0410 b PLLP_OUTA_lock The original intent should be to filter out all local symbols starting with '.L', so the dot should be escaped. Fixes: 00902e984732 ("mksysmap: Add h8300 local symbol pattern") Signed-off-by: ashimida <ashimida@linux.alibaba.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- scripts/mksysmap | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/mksysmap b/scripts/mksysmap index a35acc0d0b82..9aa23d15862a 100755 --- a/scripts/mksysmap +++ b/scripts/mksysmap @@ -41,4 +41,4 @@ # so we just ignore them to let readprofile continue to work. # (At least sparc64 has __crc_ in the middle). -$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( .L\)' > $2 +$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)' > $2 -- 2.25.1

From: Simon Arlott <simon@octiron.net> [ Upstream commit 6555781b3fdec5e94e6914511496144241df7dee ] If the cdrom fails to be registered then the device minor should be deallocated. Link: https://lore.kernel.org/r/072dac4b-8402-4de8-36bd-47e7588969cd@0882a8b5-c6c3... Signed-off-by: Simon Arlott <simon@octiron.net> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/scsi/sr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index d0389b20574d..5be3d6b7991b 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -748,7 +748,7 @@ static int sr_probe(struct device *dev) cd->cdi.disk = disk; if (register_cdrom(&cd->cdi)) - goto fail_put; + goto fail_minor; /* * Initialize block layer runtime PM stuffs before the @@ -766,6 +766,10 @@ static int sr_probe(struct device *dev) return 0; +fail_minor: + spin_lock(&sr_index_lock); + clear_bit(minor, sr_index_bits); + spin_unlock(&sr_index_lock); fail_put: put_disk(disk); fail_free: -- 2.25.1

From: John Johansen <john.johansen@canonical.com> [ Upstream commit 3ed4aaa94fc07db3cd0c91be95e3e1b9782a2710 ] The subset test is not taking into account the unconfined exception which will cause profile transitions in the stacked confinement case to fail when no_new_privs is applied. This fixes a regression introduced in the fix for https://bugs.launchpad.net/bugs/1839037 BugLink: https://bugs.launchpad.net/bugs/1844186 Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- security/apparmor/domain.c | 9 +++++---- security/apparmor/include/label.h | 1 + security/apparmor/label.c | 33 +++++++++++++++++++++++++++++++ 3 files changed, 39 insertions(+), 4 deletions(-) diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c index b9d5b3459705..13b33490e079 100644 --- a/security/apparmor/domain.c +++ b/security/apparmor/domain.c @@ -939,7 +939,8 @@ int apparmor_bprm_set_creds(struct linux_binprm *bprm) * aways results in a further reduction of permissions. */ if ((bprm->unsafe & LSM_UNSAFE_NO_NEW_PRIVS) && - !unconfined(label) && !aa_label_is_subset(new, ctx->nnp)) { + !unconfined(label) && + !aa_label_is_unconfined_subset(new, ctx->nnp)) { error = -EPERM; info = "no new privs"; goto audit; @@ -1217,7 +1218,7 @@ int aa_change_hat(const char *hats[], int count, u64 token, int flags) * reduce restrictions. */ if (task_no_new_privs(current) && !unconfined(label) && - !aa_label_is_subset(new, ctx->nnp)) { + !aa_label_is_unconfined_subset(new, ctx->nnp)) { /* not an apparmor denial per se, so don't log it */ AA_DEBUG("no_new_privs - change_hat denied"); error = -EPERM; @@ -1238,7 +1239,7 @@ int aa_change_hat(const char *hats[], int count, u64 token, int flags) * reduce restrictions. */ if (task_no_new_privs(current) && !unconfined(label) && - !aa_label_is_subset(previous, ctx->nnp)) { + !aa_label_is_unconfined_subset(previous, ctx->nnp)) { /* not an apparmor denial per se, so don't log it */ AA_DEBUG("no_new_privs - change_hat denied"); error = -EPERM; @@ -1433,7 +1434,7 @@ int aa_change_profile(const char *fqname, int flags) * reduce restrictions. */ if (task_no_new_privs(current) && !unconfined(label) && - !aa_label_is_subset(new, ctx->nnp)) { + !aa_label_is_unconfined_subset(new, ctx->nnp)) { /* not an apparmor denial per se, so don't log it */ AA_DEBUG("no_new_privs - change_hat denied"); error = -EPERM; diff --git a/security/apparmor/include/label.h b/security/apparmor/include/label.h index 7ce5fe73ae7f..cecbd3f5429c 100644 --- a/security/apparmor/include/label.h +++ b/security/apparmor/include/label.h @@ -285,6 +285,7 @@ bool aa_label_init(struct aa_label *label, int size, gfp_t gfp); struct aa_label *aa_label_alloc(int size, struct aa_proxy *proxy, gfp_t gfp); bool aa_label_is_subset(struct aa_label *set, struct aa_label *sub); +bool aa_label_is_unconfined_subset(struct aa_label *set, struct aa_label *sub); struct aa_profile *__aa_label_next_not_in_set(struct label_it *I, struct aa_label *set, struct aa_label *sub); diff --git a/security/apparmor/label.c b/security/apparmor/label.c index 6e7aa2ef8ee0..6727e6fb69df 100644 --- a/security/apparmor/label.c +++ b/security/apparmor/label.c @@ -554,6 +554,39 @@ bool aa_label_is_subset(struct aa_label *set, struct aa_label *sub) return __aa_label_next_not_in_set(&i, set, sub) == NULL; } +/** + * aa_label_is_unconfined_subset - test if @sub is a subset of @set + * @set: label to test against + * @sub: label to test if is subset of @set + * + * This checks for subset but taking into account unconfined. IF + * @sub contains an unconfined profile that does not have a matching + * unconfined in @set then this will not cause the test to fail. + * Conversely we don't care about an unconfined in @set that is not in + * @sub + * + * Returns: true if @sub is special_subset of @set + * else false + */ +bool aa_label_is_unconfined_subset(struct aa_label *set, struct aa_label *sub) +{ + struct label_it i = { }; + struct aa_profile *p; + + AA_BUG(!set); + AA_BUG(!sub); + + if (sub == set) + return true; + + do { + p = __aa_label_next_not_in_set(&i, set, sub); + if (p && !profile_unconfined(p)) + break; + } while (p); + + return p == NULL; +} /** -- 2.25.1

From: Chen Zhou <chenzhou10@huawei.com> [ Upstream commit 9bb086e5ba9495ac150fbbcc5c8c2bccc06261dd ] In gb_lights_light_config(), 'light->name' is allocated by kstrndup(). It returns NULL when fails, add check for it. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Link: https://lore.kernel.org/r/20200401030017.100274-1-chenzhou10@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/staging/greybus/light.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/greybus/light.c b/drivers/staging/greybus/light.c index 40680eaf3974..db06cd544af5 100644 --- a/drivers/staging/greybus/light.c +++ b/drivers/staging/greybus/light.c @@ -1028,7 +1028,8 @@ static int gb_lights_light_config(struct gb_lights *glights, u8 id) light->channels_count = conf.channel_count; light->name = kstrndup(conf.name, NAMES_MAX, GFP_KERNEL); - + if (!light->name) + return -ENOMEM; light->channels = kcalloc(light->channels_count, sizeof(struct gb_channel), GFP_KERNEL); if (!light->channels) -- 2.25.1

From: Nilesh Javali <njavali@marvell.com> [ Upstream commit 927527aea0e2a9c1d336c7d33f77f1911481d008 ] For an unreachable target, offload_work is not initialized and the endpoint state is set to OFLDCONN_NONE. This results in a WARN_ON due to the check of the work function field being set to zero. ------------[ cut here ]------------ WARNING: CPU: 24 PID: 18587 at ../kernel/workqueue.c:3037 __flush_work+0x1c1/0x1d0 : Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 02/01/2020 RIP: 0010:__flush_work+0x1c1/0x1d0 Code: ba 6d 00 03 80 c9 f0 eb b6 48 c7 c7 20 ee 6c a4 e8 52 d3 04 00 0f 0b 31 c0 e9 d1 fe ff ff 48 c7 c7 20 ee 6c a4 e8 3d d3 04 00 <0f> 0b 31 c0 e9 bc fe ff ff e8 11 f3 f 00 31 f6 RSP: 0018:ffffac5a8cd47a80 EFLAGS: 00010282 RAX: 0000000000000024 RBX: ffff98d68c1fcaf0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff98ce9fd99898 RDI: ffff98ce9fd99898 RBP: ffff98d68c1fcbc0 R08: 00000000000006fa R09: 0000000000000001 R10: ffffac5a8cd47b50 R11: 0000000000000001 R12: 0000000000000000 R13: 000000000000489b R14: ffff98d68c1fc800 R15: ffff98d692132c00 FS: 00007f65f7f62280(0000) GS:ffff98ce9fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd2435e880 CR3: 0000000809334003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? class_create_release+0x40/0x40 ? klist_put+0x2c/0x80 qedi_ep_disconnect+0xdd/0x400 [qedi] iscsi_if_ep_disconnect.isra.20+0x59/0x70 [scsi_transport_iscsi] iscsi_if_rx+0x129b/0x1670 [scsi_transport_iscsi] ? __netlink_lookup+0xe7/0x160 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x30f/0x430 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1e2/0x240 ? copy_msghdr_from_user+0xd9/0x160 ___sys_sendmsg+0x88/0xd0 ? ___sys_recvmsg+0xa2/0xe0 ? hrtimer_try_to_cancel+0x25/0x100 ? do_nanosleep+0x9c/0x170 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f65f6f16107 Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 aa d2 2b 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 8 0 00 00 00 00 53 48 89 f3 48 RSP: 002b:00007ffd24367ca8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a7aeaaf110 RCX: 00007f65f6f16107 RDX: 0000000000000000 RSI: 00007ffd24367cc0 RDI: 0000000000000003 RBP: 0000000000000070 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000075c R11: 0000000000000246 R12: 00007ffd24367cc0 R13: 000055a7ae560008 R14: 00007ffd24367db0 R15: 0000000000000000 ---[ end trace 54f499c05d41f8bb ]--- Only flush if the connection endpoint state if different from OFLDCONN_NONE. [mkp: clarified commit desc] Link: https://lore.kernel.org/r/20200408064332.19377-5-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/scsi/qedi/qedi_iscsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c index d59473d1679f..751941a3ed30 100644 --- a/drivers/scsi/qedi/qedi_iscsi.c +++ b/drivers/scsi/qedi/qedi_iscsi.c @@ -1000,7 +1000,8 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep) if (qedi_ep->state == EP_STATE_OFLDCONN_START) goto ep_exit_recover; - flush_work(&qedi_ep->offload_work); + if (qedi_ep->state != EP_STATE_OFLDCONN_NONE) + flush_work(&qedi_ep->offload_work); if (qedi_ep->conn) { qedi_conn = qedi_ep->conn; -- 2.25.1

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [ Upstream commit c58220cba2e03618659fa7d5dfae31f5ad4ae9d0 ] The commit 3d2613c4289f ("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver") introduced a use of the platform driver but missed to add the following line to it: MODULE_ALIAS("platform:gpio-dwapb"); Add this to get driver loaded automatically if platform device is registered. Fixes: 3d2613c4289f ("GPIO: gpio-dwapb: Enable platform driver binding to MFD driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200415141534.31240-2-andriy.shevchenko@linux.int... Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/gpio/gpio-dwapb.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index 68db0033d158..2a56efced798 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -51,7 +51,9 @@ #define GPIO_EXT_PORTC 0x58 #define GPIO_EXT_PORTD 0x5c +#define DWAPB_DRIVER_NAME "gpio-dwapb" #define DWAPB_MAX_PORTS 4 + #define GPIO_EXT_PORT_STRIDE 0x04 /* register stride 32 bits */ #define GPIO_SWPORT_DR_STRIDE 0x0c /* register stride 3*32 bits */ #define GPIO_SWPORT_DDR_STRIDE 0x0c /* register stride 3*32 bits */ @@ -400,7 +402,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio, return; err = irq_alloc_domain_generic_chips(gpio->domain, ngpio, 2, - "gpio-dwapb", handle_level_irq, + DWAPB_DRIVER_NAME, handle_level_irq, IRQ_NOREQUEST, 0, IRQ_GC_INIT_NESTED_LOCK); if (err) { @@ -457,7 +459,7 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio, */ err = devm_request_irq(gpio->dev, pp->irq[0], dwapb_irq_handler_mfd, - IRQF_SHARED, "gpio-dwapb-mfd", gpio); + IRQF_SHARED, DWAPB_DRIVER_NAME, gpio); if (err) { dev_err(gpio->dev, "error requesting IRQ\n"); irq_domain_remove(gpio->domain); @@ -849,7 +851,7 @@ static SIMPLE_DEV_PM_OPS(dwapb_gpio_pm_ops, dwapb_gpio_suspend, static struct platform_driver dwapb_gpio_driver = { .driver = { - .name = "gpio-dwapb", + .name = DWAPB_DRIVER_NAME, .pm = &dwapb_gpio_pm_ops, .of_match_table = of_match_ptr(dwapb_of_match), .acpi_match_table = ACPI_PTR(dwapb_acpi_match), @@ -863,3 +865,4 @@ module_platform_driver(dwapb_gpio_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jamie Iles"); MODULE_DESCRIPTION("Synopsys DesignWare APB GPIO driver"); +MODULE_ALIAS("platform:" DWAPB_DRIVER_NAME); -- 2.25.1

From: Jason Yan <yanaijie@huawei.com> [ Upstream commit 4b4e8e93eccc2abc4209fe226ec89e7fbe9f3c61 ] The rza1l_swio_entries referred to the wrong array rza1h_swio_pins, which was intended to be rza1l_swio_pins. So let's fix it. This is detected by the following gcc warning: drivers/pinctrl/pinctrl-rza1.c:401:35: warning: ‘rza1l_swio_pins’ defined but not used [-Wunused-const-variable=] static const struct rza1_swio_pin rza1l_swio_pins[] = { ^~~~~~~~~~~~~~~ Fixes: 039bc58e73b77723 ("pinctrl: rza1: Add support for RZ/A1L") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200417111604.19143-1-yanaijie@huawei.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/pinctrl/pinctrl-rza1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c index f76edf664539..021c19eaf12d 100644 --- a/drivers/pinctrl/pinctrl-rza1.c +++ b/drivers/pinctrl/pinctrl-rza1.c @@ -421,7 +421,7 @@ static const struct rza1_bidir_entry rza1l_bidir_entries[RZA1_NPORTS] = { }; static const struct rza1_swio_entry rza1l_swio_entries[] = { - [0] = { ARRAY_SIZE(rza1h_swio_pins), rza1h_swio_pins }, + [0] = { ARRAY_SIZE(rza1l_swio_pins), rza1l_swio_pins }, }; /* RZ/A1L (r7s72102x) pinmux flags table */ -- 2.25.1

From: Xiyu Yang <xiyuyang19@fudan.edu.cn> [ Upstream commit 57a66838e1494cd881b7f4e110ec685736e8e3ca ] gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference of the specified gasket_sysfs_mapping object to "mapping" with increased refcnt. When gasket_sysfs_put_attr() returns, local variable "mapping" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one path of gasket_sysfs_put_attr(). When mapping attribute is unknown, the function forgets to decrease the refcnt increased by get_mapping(), causing a refcnt leak. Fix this issue by calling put_mapping() when put attribute fails due to unknown attribute. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/1587618895-13660-1-git-send-email-xiyuyang19@fudan... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/staging/gasket/gasket_sysfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/gasket/gasket_sysfs.c b/drivers/staging/gasket/gasket_sysfs.c index fc45f0d13e87..9c982f1c0881 100644 --- a/drivers/staging/gasket/gasket_sysfs.c +++ b/drivers/staging/gasket/gasket_sysfs.c @@ -343,6 +343,7 @@ void gasket_sysfs_put_attr(struct device *device, dev_err(device, "Unable to put unknown attribute: %s\n", attr->attr.attr.name); + put_mapping(mapping); } EXPORT_SYMBOL(gasket_sysfs_put_attr); -- 2.25.1

From: Alexander Tsoy <alexander@tsoy.me> [ Upstream commit f0bd62b64016508938df9babe47f65c2c727d25c ] For computation of the the next frame size current value of fs/fps and accumulated fractional parts of fs/fps are used, where values are stored in Q16.16 format. This is quite natural for computing frame size for asynchronous endpoints driven by explicit feedback, since in this case fs/fps is a value provided by the feedback endpoint and it's already in the Q format. If an error is accumulated over time, the device can adjust fs/fps value to prevent buffer overruns/underruns. But for synchronous endpoints the accuracy provided by these computations is not enough. Due to accumulated error the driver periodically produces frames with incorrect size (+/- 1 audio sample). This patch fixes this issue by implementing a different algorithm for frame size computation. It is based on accumulating of the remainders from division fs/fps and it doesn't accumulate errors over time. This new method is enabled for synchronous and adaptive playback endpoints. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20200424022449.14972-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- sound/usb/card.h | 4 ++++ sound/usb/endpoint.c | 43 ++++++++++++++++++++++++++++++++++++++----- sound/usb/endpoint.h | 1 + sound/usb/pcm.c | 2 ++ 4 files changed, 45 insertions(+), 5 deletions(-) diff --git a/sound/usb/card.h b/sound/usb/card.h index 7f11655bde50..36198ddb4754 100644 --- a/sound/usb/card.h +++ b/sound/usb/card.h @@ -83,6 +83,10 @@ struct snd_usb_endpoint { dma_addr_t sync_dma; /* DMA address of syncbuf */ unsigned int pipe; /* the data i/o pipe */ + unsigned int framesize[2]; /* small/large frame sizes in samples */ + unsigned int sample_rem; /* remainder from division fs/fps */ + unsigned int sample_accum; /* sample accumulator */ + unsigned int fps; /* frames per second */ unsigned int freqn; /* nominal sampling rate in fs/fps in Q16.16 format */ unsigned int freqm; /* momentary sampling rate in fs/fps in Q16.16 format */ int freqshift; /* how much to shift the feedback value to get Q16.16 */ diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index aeb74cc6ceff..36e255d88937 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -137,12 +137,12 @@ int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep) /* * For streaming based on information derived from sync endpoints, - * prepare_outbound_urb_sizes() will call next_packet_size() to + * prepare_outbound_urb_sizes() will call slave_next_packet_size() to * determine the number of samples to be sent in the next packet. * - * For implicit feedback, next_packet_size() is unused. + * For implicit feedback, slave_next_packet_size() is unused. */ -int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) +int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep) { unsigned long flags; int ret; @@ -159,6 +159,29 @@ int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) return ret; } +/* + * For adaptive and synchronous endpoints, prepare_outbound_urb_sizes() + * will call next_packet_size() to determine the number of samples to be + * sent in the next packet. + */ +int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep) +{ + int ret; + + if (ep->fill_max) + return ep->maxframesize; + + ep->sample_accum += ep->sample_rem; + if (ep->sample_accum >= ep->fps) { + ep->sample_accum -= ep->fps; + ret = ep->framesize[1]; + } else { + ret = ep->framesize[0]; + } + + return ret; +} + static void retire_outbound_urb(struct snd_usb_endpoint *ep, struct snd_urb_ctx *urb_ctx) { @@ -203,6 +226,8 @@ static void prepare_silent_urb(struct snd_usb_endpoint *ep, if (ctx->packet_size[i]) counts = ctx->packet_size[i]; + else if (ep->sync_master) + counts = snd_usb_endpoint_slave_next_packet_size(ep); else counts = snd_usb_endpoint_next_packet_size(ep); @@ -887,10 +912,17 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep, ep->maxpacksize = fmt->maxpacksize; ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX); - if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) + if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) { ep->freqn = get_usb_full_speed_rate(rate); - else + ep->fps = 1000; + } else { ep->freqn = get_usb_high_speed_rate(rate); + ep->fps = 8000; + } + + ep->sample_rem = rate % ep->fps; + ep->framesize[0] = rate / ep->fps; + ep->framesize[1] = (rate + (ep->fps - 1)) / ep->fps; /* calculate the frequency in 16.16 format */ ep->freqm = ep->freqn; @@ -949,6 +981,7 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) ep->active_mask = 0; ep->unlink_mask = 0; ep->phase = 0; + ep->sample_accum = 0; snd_usb_endpoint_start_quirk(ep); diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h index 63a39d4fa8d8..d23fa0a8c11b 100644 --- a/sound/usb/endpoint.h +++ b/sound/usb/endpoint.h @@ -28,6 +28,7 @@ void snd_usb_endpoint_release(struct snd_usb_endpoint *ep); void snd_usb_endpoint_free(struct snd_usb_endpoint *ep); int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep); +int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep); int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep); void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep, diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 8b91be394407..42ae774f6db7 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1558,6 +1558,8 @@ static void prepare_playback_urb(struct snd_usb_substream *subs, for (i = 0; i < ctx->packets; i++) { if (ctx->packet_size[i]) counts = ctx->packet_size[i]; + else if (ep->sync_master) + counts = snd_usb_endpoint_slave_next_packet_size(ep); else counts = snd_usb_endpoint_next_packet_size(ep); -- 2.25.1

From: Julian Wiedmann <jwi@linux.ibm.com> [ Upstream commit 75e82bec6b2622c6f455b7a543fb5476a5d0eed7 ] qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq(). If the subsequent qdio_establish_thinint() fails, we miss to put the DSCI again. Thus the DSCI isn't available for re-use. Given enough of such errors, we could end up with having only the shared DSCI available. Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with such an error internally. Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/s390/cio/qdio.h | 1 - drivers/s390/cio/qdio_setup.c | 1 - drivers/s390/cio/qdio_thinint.c | 14 ++++++++------ 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h index a6f7c2986b94..ed60b8d4efe6 100644 --- a/drivers/s390/cio/qdio.h +++ b/drivers/s390/cio/qdio.h @@ -377,7 +377,6 @@ static inline int multicast_outbound(struct qdio_q *q) extern u64 last_ai_time; /* prototypes for thin interrupt */ -void qdio_setup_thinint(struct qdio_irq *irq_ptr); int qdio_establish_thinint(struct qdio_irq *irq_ptr); void qdio_shutdown_thinint(struct qdio_irq *irq_ptr); void tiqdio_add_input_queues(struct qdio_irq *irq_ptr); diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index d040c4920ee7..b8955e20f246 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -480,7 +480,6 @@ int qdio_setup_irq(struct qdio_initialize *init_data) setup_queues(irq_ptr, init_data); setup_qib(irq_ptr, init_data); - qdio_setup_thinint(irq_ptr); set_impl_params(irq_ptr, init_data->qib_param_field_format, init_data->qib_param_field, init_data->input_slib_elements, diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c index 6628e0c9e70e..e6b22a58150a 100644 --- a/drivers/s390/cio/qdio_thinint.c +++ b/drivers/s390/cio/qdio_thinint.c @@ -267,17 +267,19 @@ int __init tiqdio_register_thinints(void) int qdio_establish_thinint(struct qdio_irq *irq_ptr) { + int rc; + if (!is_thinint_irq(irq_ptr)) return 0; - return set_subchannel_ind(irq_ptr, 0); -} -void qdio_setup_thinint(struct qdio_irq *irq_ptr) -{ - if (!is_thinint_irq(irq_ptr)) - return; irq_ptr->dsci = get_indicator(); DBF_HEX(&irq_ptr->dsci, sizeof(void *)); + + rc = set_subchannel_ind(irq_ptr, 0); + if (rc) + put_indicator(irq_ptr->dsci); + + return rc; } void qdio_shutdown_thinint(struct qdio_irq *irq_ptr) -- 2.25.1

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> [ Upstream commit b58c663059b484f7ff547d076a34cf6d7a302e56 ] Get drvdata directly from parent instead of ngd dev, as ngd dev can probe defer and previously set drvdata will become null. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200417093618.7929-1-srinivas.kandagatla@linaro.o... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/slimbus/qcom-ngd-ctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index 9221ba7b7863..f40ac8dcb081 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -1350,7 +1350,6 @@ static int of_qcom_slim_ngd_register(struct device *parent, ngd->pdev->driver_override = QCOM_SLIM_NGD_DRV_NAME; ngd->pdev->dev.of_node = node; ctrl->ngd = ngd; - platform_set_drvdata(ngd->pdev, ctrl); platform_device_add(ngd->pdev); ngd->base = ctrl->base + ngd->id * data->offset + @@ -1365,12 +1364,13 @@ static int of_qcom_slim_ngd_register(struct device *parent, static int qcom_slim_ngd_probe(struct platform_device *pdev) { - struct qcom_slim_ngd_ctrl *ctrl = platform_get_drvdata(pdev); struct device *dev = &pdev->dev; + struct qcom_slim_ngd_ctrl *ctrl = dev_get_drvdata(dev->parent); int ret; ctrl->ctrl.dev = dev; + platform_set_drvdata(pdev, ctrl); pm_runtime_use_autosuspend(dev); pm_runtime_set_autosuspend_delay(dev, QCOM_SLIM_NGD_AUTOSUSPEND); pm_runtime_set_suspended(dev); -- 2.25.1

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com> [ Upstream commit 8d99087c2db863c5fa3a4a1f3cb82b3a493705ca ] If dwc3 fails to issue START_TRANSFER/UPDATE_TRANSFER command, then we should properly end an active transfer and give back all the started requests. However if it's for an isoc endpoint, the failure maybe due to bus-expiry status. In this case, don't give back the requests and wait for the next retry. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/usb/dwc3/gadget.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 8e66954dfcd4..2f5f4ca5c0d0 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1217,6 +1217,8 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) } } +static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep); + static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; @@ -1253,14 +1255,20 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); if (ret < 0) { - /* - * FIXME we need to iterate over the list of requests - * here and stop, unmap, free and del each of the linked - * requests instead of what we do now. - */ - if (req->trb) - memset(req->trb, 0, sizeof(struct dwc3_trb)); - dwc3_gadget_del_and_unmap_request(dep, req, ret); + struct dwc3_request *tmp; + + if (ret == -EAGAIN) + return ret; + + dwc3_stop_active_transfer(dep, true, true); + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(req); + + /* If ep isn't started, then there's no end transfer pending */ + if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + return ret; } -- 2.25.1

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> [ Upstream commit bca718988b9008d0d5f504e2d318178fc84958c1 ] If we fails somewhere in 'v3_pci_probe()', we need to free 'host'. Use the managed version of 'pci_alloc_host_bridge()' to do that easily. The use of managed resources is already widely used in this driver. Link: https://lore.kernel.org/r/20200418081637.1585-1-christophe.jaillet@wanadoo.f... Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/pci/controller/pci-v3-semi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c index d219404bad92..9a86bb7448ac 100644 --- a/drivers/pci/controller/pci-v3-semi.c +++ b/drivers/pci/controller/pci-v3-semi.c @@ -743,7 +743,7 @@ static int v3_pci_probe(struct platform_device *pdev) int ret; LIST_HEAD(res); - host = pci_alloc_host_bridge(sizeof(*v3)); + host = devm_pci_alloc_host_bridge(dev, sizeof(*v3)); if (!host) return -ENOMEM; -- 2.25.1

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> [ Upstream commit 388bcc6ecc609fca1b4920de7dc3806c98ec535e ] If platform bus driver registration is failed then, accessing platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock) in __platform_driver_probe() without verifying the return value __platform_driver_register() can lead to NULL pointer exception. So check the return value before attempting the spin lock. One such example is below: For a custom usecase, I have intentionally failed the platform bus registration and I expected all the platform device/driver registrations to fail gracefully. But I came across this panic issue. [ 1.331067] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 1.331118] #PF: supervisor write access in kernel mode [ 1.331163] #PF: error_code(0x0002) - not-present page [ 1.331208] PGD 0 P4D 0 [ 1.331233] Oops: 0002 [#1] PREEMPT SMP [ 1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-00049-g670d35fb0144 #165 [ 1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30 [ 1.331588] RSP: 0000:ffffc9000001be70 EFLAGS: 00010246 [ 1.331632] RAX: 0000000000000000 RBX: 00000000000000c8 RCX: 0000000000000001 [ 1.331696] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000000 [ 1.331754] RBP: 00000000ffffffed R08: 0000000000000501 R09: 0000000000000001 [ 1.331817] R10: ffff88817abcc520 R11: 0000000000000670 R12: 00000000ffffffed [ 1.331881] R13: ffffffff82dbc268 R14: ffffffff832f070a R15: 0000000000000000 [ 1.331945] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 1.332008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.332062] CR2: 00000000000000c8 CR3: 000000000681e001 CR4: 00000000003606e0 [ 1.332126] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.332189] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.332252] Call Trace: [ 1.332281] __platform_driver_probe+0x92/0xee [ 1.332323] ? rtc_dev_init+0x2b/0x2b [ 1.332358] cmos_init+0x37/0x67 [ 1.332396] do_one_initcall+0x7d/0x168 [ 1.332428] kernel_init_freeable+0x16c/0x1c9 [ 1.332473] ? rest_init+0xc0/0xc0 [ 1.332508] kernel_init+0x5/0x100 [ 1.332543] ret_from_fork+0x1f/0x30 [ 1.332579] CR2: 00000000000000c8 [ 1.332616] ---[ end trace 3bd87f12e9010b87 ]--- [ 1.333549] note: swapper/0[1] exited with preempt_count 1 [ 1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 1.333736] Kernel Offset: disabled Note, this can only be triggered if a driver errors out from this call, which should never happen. If it does, the driver needs to be fixed. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20200408214003.3356-1-sathyanarayanan.kuppuswamy@l... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/base/platform.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index d1f901b58f75..349c2754eed7 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -700,6 +700,8 @@ int __init_or_module __platform_driver_probe(struct platform_driver *drv, /* temporary section violation during probe() */ drv->probe = probe; retval = code = __platform_driver_register(drv, module); + if (retval) + return retval; /* * Fixup that section violation, being paranoid about code scanning -- 2.25.1

From: Kai-Heng Feng <kai.heng.feng@canonical.com> [ Upstream commit 66ff14e59e8a30690755b08bc3042359703fb07a ] 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") added the ability for Linux to enable ASPM, but for some undocumented reason, it didn't enable ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge. Remove this exclusion so we can enable ASPM on these links. The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001 PCIe-to-PCI Bridge. Enabling ASPM on the link leading to it allows the Intel SoC to enter deeper Package C-states, which is a significant power savings. [bhelgaas: commit log] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571 Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/pci/pcie/aspm.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index fc004dfec980..e9c4d3c21a3a 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -633,16 +633,6 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) /* Setup initial capable state. Will be updated later */ link->aspm_capable = link->aspm_support; - /* - * If the downstream component has pci bridge function, don't - * do ASPM for now. - */ - list_for_each_entry(child, &linkbus->devices, bus_list) { - if (pci_pcie_type(child) == PCI_EXP_TYPE_PCI_BRIDGE) { - link->aspm_disable = ASPM_STATE_ALL; - break; - } - } /* Get and check endpoint acceptable latencies */ list_for_each_entry(child, &linkbus->devices, bus_list) { -- 2.25.1

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> [ Upstream commit 934ed3847a4ebc75b655659c4d2349ba4337941c ] In the probe function, in case of error, resources allocated in 'lp8788_setup_adc_channel()' must be released. This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function and to axe the 'lp8788_release_adc_channel()' function which is now useless. Fixes: 98a276649358 ("power_supply: Add new lp8788 charger driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/power/supply/lp8788-charger.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/drivers/power/supply/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c index 0f3432795f3c..b8f7dac7ac3f 100644 --- a/drivers/power/supply/lp8788-charger.c +++ b/drivers/power/supply/lp8788-charger.c @@ -600,27 +600,14 @@ static void lp8788_setup_adc_channel(struct device *dev, return; /* ADC channel for battery voltage */ - chan = iio_channel_get(dev, pdata->adc_vbatt); + chan = devm_iio_channel_get(dev, pdata->adc_vbatt); pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan; /* ADC channel for battery temperature */ - chan = iio_channel_get(dev, pdata->adc_batt_temp); + chan = devm_iio_channel_get(dev, pdata->adc_batt_temp); pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan; } -static void lp8788_release_adc_channel(struct lp8788_charger *pchg) -{ - int i; - - for (i = 0; i < LP8788_NUM_CHG_ADC; i++) { - if (!pchg->chan[i]) - continue; - - iio_channel_release(pchg->chan[i]); - pchg->chan[i] = NULL; - } -} - static ssize_t lp8788_show_charger_status(struct device *dev, struct device_attribute *attr, char *buf) { @@ -747,7 +734,6 @@ static int lp8788_charger_remove(struct platform_device *pdev) lp8788_irq_unregister(pdev, pchg); sysfs_remove_group(&pdev->dev.kobj, &lp8788_attr_group); lp8788_psy_unregister(pchg); - lp8788_release_adc_channel(pchg); return 0; } -- 2.25.1

From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> [ Upstream commit cbbfdb2a2416c9f0cde913cf09670097ac281282 ] Fix following warning from Smatch static analyser: drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->hpr_lookup' double freed drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->internal_lookup' double freed Link: https://lore.kernel.org/r/20200508110738.30732-1-suganath-prabu.subramani@br... Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 2c556c7fcf0d..9fbe20e38ad0 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4284,7 +4284,9 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) } kfree(ioc->hpr_lookup); + ioc->hpr_lookup = NULL; kfree(ioc->internal_lookup); + ioc->internal_lookup = NULL; if (ioc->chain_lookup) { for (i = 0; i < ioc->scsiio_depth; i++) { for (j = ioc->chains_per_prp_buffer; -- 2.25.1

From: Arnd Bergmann <arnd@arndb.de> [ Upstream commit fe204591cc9480347af7d2d6029b24a62e449486 ] Building a kernel with clang sometimes fails with an objtool error in dlm: fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc The problem is that BUG() never returns and the compiler knows that anything after it is unreachable, however the panic still emits some code that does not get fully eliminated. Having both BUG() and panic() is really pointless as the BUG() kills the current process and the subsequent panic() never hits. In most cases, we probably don't really want either and should replace the DLM_ASSERT() statements with WARN_ON(), as has been done for some of them. Remove the BUG() here so the user at least sees the panic message and we can reliably build randconfig kernels. Fixes: e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM") Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: clang-built-linux@googlegroups.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- fs/dlm/dlm_internal.h | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/dlm/dlm_internal.h b/fs/dlm/dlm_internal.h index 748e8d59e611..cb287df13a7a 100644 --- a/fs/dlm/dlm_internal.h +++ b/fs/dlm/dlm_internal.h @@ -99,7 +99,6 @@ do { \ __LINE__, __FILE__, #x, jiffies); \ {do} \ printk("\n"); \ - BUG(); \ panic("DLM: Record message above and reboot.\n"); \ } \ } -- 2.25.1

From: Rob Herring <robh@kernel.org> [ Upstream commit 1b54ae8327a4d630111c8d88ba7906483ec6010b ] If device_register() has an error, we should bail out of pci_register_host_bridge() rather than continuing on. Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface") Link: https://lore.kernel.org/r/20200513223859.11295-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/pci/probe.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 9d9eb66a7e1e..43d48e77ab16 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -870,9 +870,10 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge) goto free; err = device_register(&bridge->dev); - if (err) + if (err) { put_device(&bridge->dev); - + goto free; + } bus->bridge = get_device(&bridge->dev); device_enable_async_suspend(bus->bridge); pci_set_bus_of_node(bus); -- 2.25.1

From: Gregory CLEMENT <gregory.clement@bootlin.com> [ Upstream commit 84d6f81c1fb58b56eba81ff0a36cf31946064b40 ] For at least some modems like the TELIT LE910, skipping SOF makes transfers blocking indefinitely after a short amount of data transferred. Given the small improvement provided by skipping the SOF (just one byte on about 100 bytes), it seems better to completely remove this "feature" than make it optional. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20200512115323.1447922-3-gregory.clement@bootlin.c... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/tty/n_gsm.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 86b7e20ffd7f..8d8229dd2796 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -669,7 +669,6 @@ static void gsm_data_kick(struct gsm_mux *gsm) { struct gsm_msg *msg, *nmsg; int len; - int skip_sof = 0; list_for_each_entry_safe(msg, nmsg, &gsm->tx_list, list) { if (gsm->constipated && msg->addr) @@ -691,15 +690,10 @@ static void gsm_data_kick(struct gsm_mux *gsm) print_hex_dump_bytes("gsm_data_kick: ", DUMP_PREFIX_OFFSET, gsm->txframe, len); - - if (gsm->output(gsm, gsm->txframe + skip_sof, - len - skip_sof) < 0) + if (gsm->output(gsm, gsm->txframe, len) < 0) break; /* FIXME: Can eliminate one SOF in many more cases */ gsm->tx_bytes -= msg->len; - /* For a burst of frames skip the extra SOF within the - burst */ - skip_sof = 1; list_del(&msg->list); kfree(msg); -- 2.25.1

From: Cristian Klein <cristian.klein@elastisys.com> [ Upstream commit fb68ada81e65d593b51544fa43c284322107a742 ] The Trust Panora Graphic Tablet has two interfaces. Interface zero reports pen movement, pen pressure and pen buttons. Interface one reports tablet buttons and tablet scroll. Both use the mouse protocol. Without these quirks, libinput gets confused about what device it talks to. For completeness, here is the usbhid-dump: ``` $ sudo usbhid-dump -d 145f:0212 003:013:001:DESCRIPTOR 1588949402.559961 05 0D 09 01 A1 01 85 07 A1 02 09 00 75 08 95 07 81 02 C0 C0 09 0E A1 01 85 05 09 23 A1 02 09 52 09 53 25 0A 75 08 95 02 B1 02 C0 C0 05 0C 09 36 A1 00 85 06 05 09 19 01 29 20 15 00 25 01 95 20 75 01 81 02 C0 003:013:000:DESCRIPTOR 1588949402.563942 05 01 09 02 A1 01 85 08 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 09 38 09 00 15 81 25 7F 75 08 95 04 81 06 C0 C0 05 01 09 02 A1 01 85 09 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 26 FF 7F 95 02 75 10 81 02 05 0D 09 30 26 FF 03 95 01 75 10 81 02 C0 C0 05 01 09 00 A1 01 85 04 A1 00 26 FF 00 09 00 75 08 95 07 B1 02 C0 C0 ``` Signed-off-by: Cristian Klein <cristian.klein@elastisys.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index c1fed1aaecdf..f8026c71e2e4 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -1121,6 +1121,9 @@ #define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8882 0x8882 #define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8883 0x8883 +#define USB_VENDOR_ID_TRUST 0x145f +#define USB_DEVICE_ID_TRUST_PANORA_TABLET 0x0212 + #define USB_VENDOR_ID_TURBOX 0x062a #define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201 #define USB_DEVICE_ID_ASUS_MD_5110 0x5110 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index e5beee3e8582..f4bab7004aff 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -168,6 +168,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8882), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN_8883), HID_QUIRK_NOGET }, + { HID_USB_DEVICE(USB_VENDOR_ID_TRUST, USB_DEVICE_ID_TRUST_PANORA_TABLET), HID_QUIRK_MULTI_INPUT | HID_QUIRK_HIDINPUT_FORCE }, { HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60), HID_QUIRK_MULTI_INPUT }, -- 2.25.1

From: Nicholas Piggin <npiggin@gmail.com> [ Upstream commit deb70f7a35a22dffa55b2c3aac71bc6fb0f486ce ] This was discovered developing qemu fwnmi sreset support. This off-by-one bug means the last 16 bytes of the rtas area can not be used for a 16 byte save area. It's not a serious bug, and QEMU implementation has to retain a workaround for old kernels, but it's good to tighten it. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/powerpc/platforms/pseries/ras.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 851ce326874a..e81a285f3a6c 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -328,10 +328,11 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id) /* * Some versions of FWNMI place the buffer inside the 4kB page starting at * 0x7000. Other versions place it inside the rtas buffer. We check both. + * Minimum size of the buffer is 16 bytes. */ #define VALID_FWNMI_BUFFER(A) \ - ((((A) >= 0x7000) && ((A) < 0x7ff0)) || \ - (((A) >= rtas.base) && ((A) < (rtas.base + rtas.size - 16)))) + ((((A) >= 0x7000) && ((A) <= 0x8000 - 16)) || \ + (((A) >= rtas.base) && ((A) <= (rtas.base + rtas.size - 16)))) static inline struct rtas_error_log *fwnmi_get_errlog(void) { -- 2.25.1

From: Alex Williamson <alex.williamson@redhat.com> [ Upstream commit bc138db1b96264b9c1779cf18d5a3b186aa90066 ] The PCI Code and ID Assignment Specification changed capability ID 0 from reserved to a NULL capability in the v1.1 revision. The NULL capability is defined to include only the 16-bit capability header, ie. only the ID and next pointer. Unfortunately vfio-pci creates a map of config space, where ID 0 is used to reserve the standard type 0 header. Finding an actual capability with this ID therefore results in a bogus range marked in that map and conflicts with subsequent capabilities. As this seems to be a dummy capability anyway and we already support dropping capabilities, let's hide this one rather than delving into the potentially subtle dependencies within our map. Seen on an NVIDIA Tesla T4. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/vfio/pci/vfio_pci_config.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c index cc0a82f46870..4fe71fbce194 100644 --- a/drivers/vfio/pci/vfio_pci_config.c +++ b/drivers/vfio/pci/vfio_pci_config.c @@ -1488,7 +1488,12 @@ static int vfio_cap_init(struct vfio_pci_device *vdev) if (ret) return ret; - if (cap <= PCI_CAP_ID_MAX) { + /* + * ID 0 is a NULL capability, conflicting with our fake + * PCI_CAP_ID_BASIC. As it has no content, consider it + * hidden for now. + */ + if (cap && cap <= PCI_CAP_ID_MAX) { len = pci_cap_length[cap]; if (len == 0xFF) { /* Variable length */ len = vfio_cap_len(vdev, cap, pos); -- 2.25.1

From: Roy Spliet <nouveau@spliet.org> [ Upstream commit e4337877c5d578722c0716f131fb774522013cf5 ] When allocation for mdp5_kms fails, calling mdp5_destroy() leads to undefined behaviour, likely a nullptr exception or use-after-free troubles. Signed-off-by: Roy Spliet <nouveau@spliet.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c index bddd625ab91b..25691b7cece1 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c @@ -1021,7 +1021,8 @@ static int mdp5_init(struct platform_device *pdev, struct drm_device *dev) return 0; fail: - mdp5_destroy(pdev); + if (mdp5_kms) + mdp5_destroy(pdev); return ret; } -- 2.25.1

From: Tang Bin <tangbin@cmss.chinamobile.com> [ Upstream commit d49292025f79693d3348f8e2029a8b4703be0f0a ] The function ehci_mxc_drv_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it. Fixes: 7e8d5cd93fac ("USB: Add EHCI support for MX27 and MX31 based boards") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200513132647.5456-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/usb/host/ehci-mxc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index c9f91e6c72b6..7f65c86047dd 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -50,6 +50,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) } irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; hcd = usb_create_hcd(&ehci_mxc_hc_driver, dev, dev_name(dev)); if (!hcd) -- 2.25.1

From: Souptick Joarder <jrdr.linux@gmail.com> [ Upstream commit c9d7e3da1f3c4cf5dddfc5d7ce4d76d013aba1cc ] Corrected error handling goto sequnece. Level put_pages should be called when pinned pages >= 0 && pinned != npages. Level free_pages should be called when pinned pages < 0. Fixes: fa8dda1edef9 ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support") Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Wu Hao <hao.wu@intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/1589825991-3545-1-git-send-email-jrdr.linux@gmail.... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/fpga/dfl-afu-dma-region.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/fpga/dfl-afu-dma-region.c b/drivers/fpga/dfl-afu-dma-region.c index 53f277cf1f16..6273d00881d9 100644 --- a/drivers/fpga/dfl-afu-dma-region.c +++ b/drivers/fpga/dfl-afu-dma-region.c @@ -108,10 +108,10 @@ static int afu_dma_pin_pages(struct dfl_feature_platform_data *pdata, region->pages); if (pinned < 0) { ret = pinned; - goto put_pages; + goto free_pages; } else if (pinned != npages) { ret = -EFAULT; - goto free_pages; + goto put_pages; } dev_dbg(dev, "%d pages pinned\n", pinned); -- 2.25.1

From: Bodo Stroesser <bstroesser@ts.fujitsu.com> [ Upstream commit 61fb2482216679b9e1e797440c148bb143a5040a ] When tcmu queues a new command - no matter whether in command ring or in qfull_queue - a cmd_id from IDR udev->commands is assigned to the command. If userspace sends a wrong command completion containing the cmd_id of a command on the qfull_queue, tcmu_handle_completions() finds the command in the IDR and calls tcmu_handle_completion() for it. This might do some nasty things because commands in qfull_queue do not have a valid dbi list. To fix this bug, we no longer add queued commands to the idr. Instead the cmd_id is assign when a command is written to the command ring. Due to this change I had to adapt the source code at several places where up to now an idr_for_each had been done. [mkp: fix checkpatch warnings] Link: https://lore.kernel.org/r/20200518164833.12775-1-bstroesser@ts.fujitsu.com Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/target/target_core_user.c | 154 ++++++++++++++---------------- 1 file changed, 71 insertions(+), 83 deletions(-) diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index eff1e36ca03c..ac523f247a9c 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -893,41 +893,24 @@ static inline size_t tcmu_cmd_get_cmd_size(struct tcmu_cmd *tcmu_cmd, return command_size; } -static int tcmu_setup_cmd_timer(struct tcmu_cmd *tcmu_cmd, unsigned int tmo, - struct timer_list *timer) +static void tcmu_setup_cmd_timer(struct tcmu_cmd *tcmu_cmd, unsigned int tmo, + struct timer_list *timer) { - struct tcmu_dev *udev = tcmu_cmd->tcmu_dev; - int cmd_id; - - if (tcmu_cmd->cmd_id) - goto setup_timer; - - cmd_id = idr_alloc(&udev->commands, tcmu_cmd, 1, USHRT_MAX, GFP_NOWAIT); - if (cmd_id < 0) { - pr_err("tcmu: Could not allocate cmd id.\n"); - return cmd_id; - } - tcmu_cmd->cmd_id = cmd_id; - - pr_debug("allocated cmd %u for dev %s tmo %lu\n", tcmu_cmd->cmd_id, - udev->name, tmo / MSEC_PER_SEC); - -setup_timer: if (!tmo) - return 0; + return; tcmu_cmd->deadline = round_jiffies_up(jiffies + msecs_to_jiffies(tmo)); if (!timer_pending(timer)) mod_timer(timer, tcmu_cmd->deadline); - return 0; + pr_debug("Timeout set up for cmd %p, dev = %s, tmo = %lu\n", tcmu_cmd, + tcmu_cmd->tcmu_dev->name, tmo / MSEC_PER_SEC); } static int add_to_qfull_queue(struct tcmu_cmd *tcmu_cmd) { struct tcmu_dev *udev = tcmu_cmd->tcmu_dev; unsigned int tmo; - int ret; /* * For backwards compat if qfull_time_out is not set use @@ -942,13 +925,11 @@ static int add_to_qfull_queue(struct tcmu_cmd *tcmu_cmd) else tmo = TCMU_TIME_OUT; - ret = tcmu_setup_cmd_timer(tcmu_cmd, tmo, &udev->qfull_timer); - if (ret) - return ret; + tcmu_setup_cmd_timer(tcmu_cmd, tmo, &udev->qfull_timer); list_add_tail(&tcmu_cmd->queue_entry, &udev->qfull_queue); - pr_debug("adding cmd %u on dev %s to ring space wait queue\n", - tcmu_cmd->cmd_id, udev->name); + pr_debug("adding cmd %p on dev %s to ring space wait queue\n", + tcmu_cmd, udev->name); return 0; } @@ -970,7 +951,7 @@ static int queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, sense_reason_t *scsi_err) struct tcmu_mailbox *mb; struct tcmu_cmd_entry *entry; struct iovec *iov; - int iov_cnt, ret; + int iov_cnt, cmd_id; uint32_t cmd_head; uint64_t cdb_off; bool copy_to_data_area; @@ -1071,14 +1052,21 @@ static int queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, sense_reason_t *scsi_err) } entry->req.iov_bidi_cnt = iov_cnt; - ret = tcmu_setup_cmd_timer(tcmu_cmd, udev->cmd_time_out, - &udev->cmd_timer); - if (ret) { - tcmu_cmd_free_data(tcmu_cmd, tcmu_cmd->dbi_cnt); + cmd_id = idr_alloc(&udev->commands, tcmu_cmd, 1, USHRT_MAX, GFP_NOWAIT); + if (cmd_id < 0) { + pr_err("tcmu: Could not allocate cmd id.\n"); + tcmu_cmd_free_data(tcmu_cmd, tcmu_cmd->dbi_cnt); *scsi_err = TCM_OUT_OF_RESOURCES; return -1; } + tcmu_cmd->cmd_id = cmd_id; + + pr_debug("allocated cmd id %u for cmd %p dev %s\n", tcmu_cmd->cmd_id, + tcmu_cmd, udev->name); + + tcmu_setup_cmd_timer(tcmu_cmd, udev->cmd_time_out, &udev->cmd_timer); + entry->hdr.cmd_id = tcmu_cmd->cmd_id; /* @@ -1290,50 +1278,39 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev) return handled; } -static int tcmu_check_expired_cmd(int id, void *p, void *data) +static void tcmu_check_expired_ring_cmd(struct tcmu_cmd *cmd) { - struct tcmu_cmd *cmd = p; - struct tcmu_dev *udev = cmd->tcmu_dev; - u8 scsi_status; struct se_cmd *se_cmd; - bool is_running; - - if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)) - return 0; if (!time_after(jiffies, cmd->deadline)) - return 0; + return; - is_running = test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags); + set_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags); + list_del_init(&cmd->queue_entry); se_cmd = cmd->se_cmd; + cmd->se_cmd = NULL; - if (is_running) { - /* - * If cmd_time_out is disabled but qfull is set deadline - * will only reflect the qfull timeout. Ignore it. - */ - if (!udev->cmd_time_out) - return 0; + pr_debug("Timing out inflight cmd %u on dev %s.\n", + cmd->cmd_id, cmd->tcmu_dev->name); - set_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags); - /* - * target_complete_cmd will translate this to LUN COMM FAILURE - */ - scsi_status = SAM_STAT_CHECK_CONDITION; - list_del_init(&cmd->queue_entry); - cmd->se_cmd = NULL; - } else { - list_del_init(&cmd->queue_entry); - idr_remove(&udev->commands, id); - tcmu_free_cmd(cmd); - scsi_status = SAM_STAT_TASK_SET_FULL; - } + target_complete_cmd(se_cmd, SAM_STAT_CHECK_CONDITION); +} - pr_debug("Timing out cmd %u on dev %s that is %s.\n", - id, udev->name, is_running ? "inflight" : "queued"); +static void tcmu_check_expired_queue_cmd(struct tcmu_cmd *cmd) +{ + struct se_cmd *se_cmd; - target_complete_cmd(se_cmd, scsi_status); - return 0; + if (!time_after(jiffies, cmd->deadline)) + return; + + list_del_init(&cmd->queue_entry); + se_cmd = cmd->se_cmd; + tcmu_free_cmd(cmd); + + pr_debug("Timing out queued cmd %p on dev %s.\n", + cmd, cmd->tcmu_dev->name); + + target_complete_cmd(se_cmd, SAM_STAT_TASK_SET_FULL); } static void tcmu_device_timedout(struct tcmu_dev *udev) @@ -1418,16 +1395,15 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name) return &udev->se_dev; } -static bool run_qfull_queue(struct tcmu_dev *udev, bool fail) +static void run_qfull_queue(struct tcmu_dev *udev, bool fail) { struct tcmu_cmd *tcmu_cmd, *tmp_cmd; LIST_HEAD(cmds); - bool drained = true; sense_reason_t scsi_ret; int ret; if (list_empty(&udev->qfull_queue)) - return true; + return; pr_debug("running %s's cmdr queue forcefail %d\n", udev->name, fail); @@ -1436,11 +1412,10 @@ static bool run_qfull_queue(struct tcmu_dev *udev, bool fail) list_for_each_entry_safe(tcmu_cmd, tmp_cmd, &cmds, queue_entry) { list_del_init(&tcmu_cmd->queue_entry); - pr_debug("removing cmd %u on dev %s from queue\n", - tcmu_cmd->cmd_id, udev->name); + pr_debug("removing cmd %p on dev %s from queue\n", + tcmu_cmd, udev->name); if (fail) { - idr_remove(&udev->commands, tcmu_cmd->cmd_id); /* * We were not able to even start the command, so * fail with busy to allow a retry in case runner @@ -1455,10 +1430,8 @@ static bool run_qfull_queue(struct tcmu_dev *udev, bool fail) ret = queue_cmd_ring(tcmu_cmd, &scsi_ret); if (ret < 0) { - pr_debug("cmd %u on dev %s failed with %u\n", - tcmu_cmd->cmd_id, udev->name, scsi_ret); - - idr_remove(&udev->commands, tcmu_cmd->cmd_id); + pr_debug("cmd %p on dev %s failed with %u\n", + tcmu_cmd, udev->name, scsi_ret); /* * Ignore scsi_ret for now. target_complete_cmd * drops it. @@ -1473,13 +1446,11 @@ static bool run_qfull_queue(struct tcmu_dev *udev, bool fail) * the queue */ list_splice_tail(&cmds, &udev->qfull_queue); - drained = false; break; } } tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer); - return drained; } static int tcmu_irqcontrol(struct uio_info *info, s32 irq_on) @@ -1663,6 +1634,8 @@ static void tcmu_dev_kref_release(struct kref *kref) if (tcmu_check_and_free_pending_cmd(cmd) != 0) all_expired = false; } + if (!list_empty(&udev->qfull_queue)) + all_expired = false; idr_destroy(&udev->commands); WARN_ON(!all_expired); @@ -2031,9 +2004,6 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level) mutex_lock(&udev->cmdr_lock); idr_for_each_entry(&udev->commands, cmd, i) { - if (!test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags)) - continue; - pr_debug("removing cmd %u on dev %s from ring (is expired %d)\n", cmd->cmd_id, udev->name, test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)); @@ -2071,6 +2041,8 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level) del_timer(&udev->cmd_timer); + run_qfull_queue(udev, false); + mutex_unlock(&udev->cmdr_lock); } @@ -2692,6 +2664,7 @@ static void find_free_blocks(void) static void check_timedout_devices(void) { struct tcmu_dev *udev, *tmp_dev; + struct tcmu_cmd *cmd, *tmp_cmd; LIST_HEAD(devs); spin_lock_bh(&timed_out_udevs_lock); @@ -2702,9 +2675,24 @@ static void check_timedout_devices(void) spin_unlock_bh(&timed_out_udevs_lock); mutex_lock(&udev->cmdr_lock); - idr_for_each(&udev->commands, tcmu_check_expired_cmd, NULL); - tcmu_set_next_deadline(&udev->inflight_queue, &udev->cmd_timer); + /* + * If cmd_time_out is disabled but qfull is set deadline + * will only reflect the qfull timeout. Ignore it. + */ + if (udev->cmd_time_out) { + list_for_each_entry_safe(cmd, tmp_cmd, + &udev->inflight_queue, + queue_entry) { + tcmu_check_expired_ring_cmd(cmd); + } + tcmu_set_next_deadline(&udev->inflight_queue, + &udev->cmd_timer); + } + list_for_each_entry_safe(cmd, tmp_cmd, &udev->qfull_queue, + queue_entry) { + tcmu_check_expired_queue_cmd(cmd); + } tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer); mutex_unlock(&udev->cmdr_lock); -- 2.25.1

From: Qian Cai <cai@lca.pw> [ Upstream commit c2e929b18cea6cbf71364f22d742d9aad7f4677a ] Booting a power9 server with hash MMU could trigger an undefined behaviour because pud_offset(p4d, 0) will do, 0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10) Fix it by converting pud_index() and friends to static inline functions. UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15 shift exponent 34 is too large for 32-bit type 'int' CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-20200303+ #13 Call Trace: dump_stack+0xf4/0x164 (unreliable) ubsan_epilogue+0x18/0x78 __ubsan_handle_shift_out_of_bounds+0x160/0x21c walk_pagetables+0x2cc/0x700 walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282 (inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311 ptdump_check_wx+0x8c/0xf0 mark_rodata_ro+0x48/0x80 kernel_init+0x74/0x194 ret_from_kernel_thread+0x5c/0x74 Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200306044852.3236-1-cai@lca.pw Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/powerpc/include/asm/book3s/64/pgtable.h | 23 ++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h index 2aea6efc2e63..008eb63fa851 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -985,10 +985,25 @@ extern struct page *pgd_page(pgd_t pgd); #define pud_page_vaddr(pud) __va(pud_val(pud) & ~PUD_MASKED_BITS) #define pgd_page_vaddr(pgd) __va(pgd_val(pgd) & ~PGD_MASKED_BITS) -#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & (PTRS_PER_PGD - 1)) -#define pud_index(address) (((address) >> (PUD_SHIFT)) & (PTRS_PER_PUD - 1)) -#define pmd_index(address) (((address) >> (PMD_SHIFT)) & (PTRS_PER_PMD - 1)) -#define pte_index(address) (((address) >> (PAGE_SHIFT)) & (PTRS_PER_PTE - 1)) +static inline unsigned long pgd_index(unsigned long address) +{ + return (address >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1); +} + +static inline unsigned long pud_index(unsigned long address) +{ + return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1); +} + +static inline unsigned long pmd_index(unsigned long address) +{ + return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); +} + +static inline unsigned long pte_index(unsigned long address) +{ + return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1); +} /* * Find an entry in a page-table-directory. We combine the address region -- 2.25.1

From: Bjorn Helgaas <bhelgaas@google.com> [ Upstream commit 7b38fd9760f51cc83d80eed2cfbde8b5ead9e93a ] Except for Endpoints, we enable PTM at enumeration-time. Previously we did not account for the fact that Switch Downstream Ports are not permitted to have a PTM capability; their PTM behavior is controlled by the Upstream Port (PCIe r5.0, sec 7.9.16). Since Downstream Ports don't have a PTM capability, we did not mark them as "ptm_enabled", which meant that pci_enable_ptm() on an Endpoint failed because there was no PTM path to it. Mark Downstream Ports as "ptm_enabled" if their Upstream Port has PTM enabled. Fixes: eec097d43100 ("PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints") Reported-by: Aditya Paluri <Venkata.AdityaPaluri@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/pci/pcie/ptm.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/pci/pcie/ptm.c b/drivers/pci/pcie/ptm.c index 9361f3aa26ab..357a454cafa0 100644 --- a/drivers/pci/pcie/ptm.c +++ b/drivers/pci/pcie/ptm.c @@ -39,10 +39,6 @@ void pci_ptm_init(struct pci_dev *dev) if (!pci_is_pcie(dev)) return; - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM); - if (!pos) - return; - /* * Enable PTM only on interior devices (root ports, switch ports, * etc.) on the assumption that it causes no link traffic until an @@ -52,6 +48,23 @@ void pci_ptm_init(struct pci_dev *dev) pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END)) return; + /* + * Switch Downstream Ports are not permitted to have a PTM + * capability; their PTM behavior is controlled by the Upstream + * Port (PCIe r5.0, sec 7.9.16). + */ + ups = pci_upstream_bridge(dev); + if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM && + ups && ups->ptm_enabled) { + dev->ptm_granularity = ups->ptm_granularity; + dev->ptm_enabled = 1; + return; + } + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_PTM); + if (!pos) + return; + pci_read_config_dword(dev, pos + PCI_PTM_CAP, &cap); local_clock = (cap & PCI_PTM_GRANULARITY_MASK) >> 8; @@ -61,7 +74,6 @@ void pci_ptm_init(struct pci_dev *dev) * the spec recommendation (PCIe r3.1, sec 7.32.3), select the * furthest upstream Time Source as the PTM Root. */ - ups = pci_upstream_bridge(dev); if (ups && ups->ptm_enabled) { ctrl = PCI_PTM_CTRL_ENABLE; if (ups->ptm_granularity == 0) -- 2.25.1

From: Maor Gottlieb <maorg@mellanox.com> [ Upstream commit 63a3345c2d42a9b29e1ce2d3a4043689b3995cea ] The allocated ports structure in never freed. The free function should be called by release_cma_ports_group, but the group is never released since we don't remove its default group. Remove default groups when device group is deleted. Fixes: 045959db65c6 ("IB/cma: Add configfs for rdma_cm") Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/infiniband/core/cma_configfs.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/infiniband/core/cma_configfs.c b/drivers/infiniband/core/cma_configfs.c index eee38b40be99..ce183d054785 100644 --- a/drivers/infiniband/core/cma_configfs.c +++ b/drivers/infiniband/core/cma_configfs.c @@ -319,8 +319,21 @@ static struct config_group *make_cma_dev(struct config_group *group, return ERR_PTR(err); } +static void drop_cma_dev(struct config_group *cgroup, struct config_item *item) +{ + struct config_group *group = + container_of(item, struct config_group, cg_item); + struct cma_dev_group *cma_dev_group = + container_of(group, struct cma_dev_group, device_group); + + configfs_remove_default_groups(&cma_dev_group->ports_group); + configfs_remove_default_groups(&cma_dev_group->device_group); + config_item_put(item); +} + static struct configfs_group_operations cma_subsys_group_ops = { .make_group = make_cma_dev, + .drop_item = drop_cma_dev, }; static const struct config_item_type cma_subsys_type = { -- 2.25.1

From: Fabrice Gasnier <fabrice.gasnier@st.com> [ Upstream commit 8c935deacebb8fac8f41378701eb79d12f3c2e2d ] When the remote wakeup interrupt is triggered, lx_state is resumed from L2 to L0 state. But when the gadget resume is called, lx_state is still L2. This prevents the resume callback to queue any request. Any attempt to queue a request from resume callback will result in: - "submit request only in active state" debug message to be issued - dwc2_hsotg_ep_queue() returns -EAGAIN Call the gadget resume routine after the core is in L0 state. Fixes: f81f46e1f530 ("usb: dwc2: implement hibernation during bus suspend/resume") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/usb/dwc2/core_intr.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 19ae2595f1c3..b23ce535c12e 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -421,10 +421,13 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) if (ret && (ret != -ENOTSUPP)) dev_err(hsotg->dev, "exit power_down failed\n"); + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; call_gadget(hsotg, resume); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; } - /* Change to L0 state */ - hsotg->lx_state = DWC2_L0; } else { if (hsotg->params.power_down) return; -- 2.25.1

From: Colin Ian King <colin.king@canonical.com> [ Upstream commit eafa80041645cd7604c4357b1a0cd4a3c81f2227 ] Currently pointer ep is being dereferenced before it is null checked leading to a null pointer dereference issue. Fix this by only assigning pointer udc once ep is known to be not null. Also remove a debug message that requires a valid udc which may not be possible at that point. Addresses-Coverity: ("Dereference before null check") Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/usb/gadget/udc/lpc32xx_udc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index 21921db068f6..cf56819f16e4 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -1602,17 +1602,17 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); - struct lpc32xx_udc *udc = ep->udc; + struct lpc32xx_udc *udc; u16 maxpacket; u32 tmp; unsigned long flags; /* Verify EP data */ if ((!_ep) || (!ep) || (!desc) || - (desc->bDescriptorType != USB_DT_ENDPOINT)) { - dev_dbg(udc->dev, "bad ep or descriptor\n"); + (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; - } + + udc = ep->udc; maxpacket = usb_endpoint_maxp(desc); if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) { dev_dbg(udc->dev, "bad ep descriptor's packet size\n"); @@ -1860,7 +1860,7 @@ static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) { struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); - struct lpc32xx_udc *udc = ep->udc; + struct lpc32xx_udc *udc; unsigned long flags; if ((!ep) || (ep->hwep_num <= 1)) @@ -1870,6 +1870,7 @@ static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) if (ep->is_in) return -EAGAIN; + udc = ep->udc; spin_lock_irqsave(&udc->lock, flags); if (value == 1) { -- 2.25.1

From: Pawel Laszczak <pawell@cadence.com> [ Upstream commit 5d363120aa548ba52d58907a295eee25f8207ed2 ] This patch adds new config_ep_by_speed_and_alt function which extends the config_ep_by_speed about alt parameter. This additional parameter allows to find proper usb_ss_ep_comp_descriptor. Problem has appeared during testing f_tcm (BOT/UAS) driver function. f_tcm function for SS use array of headers for both BOT/UAS alternate setting: static struct usb_descriptor_header *uasp_ss_function_desc[] = { (struct usb_descriptor_header *) &bot_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &bot_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bi_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bo_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_status_desc, (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_comp_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, NULL, }; The first 5 descriptors are associated with BOT alternate setting, and others are associated with UAS. During handling UAS alternate setting f_tcm driver invokes config_ep_by_speed and this function sets incorrect companion endpoint descriptor in usb_ep object. Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this case set ep->comp_desc to uasp_ss_bi_desc. This is due to the fact that it searches endpoint based on endpoint address: for_each_ep_desc(speed_desc, d_spd) { chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; if (chosen_desc->bEndpoitAddress == _ep->address) goto ep_found; } And in result it uses the descriptor from BOT alternate setting instead UAS. Finally, it causes that controller driver during enabling endpoints detect that just enabled endpoint for bot. Signed-off-by: Jayshri Pawar <jpawar@cadence.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/usb/gadget/composite.c | 78 ++++++++++++++++++++++++++-------- include/linux/usb/composite.h | 3 ++ 2 files changed, 64 insertions(+), 17 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f3436913fd3f..40b3ed93596a 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -96,40 +96,43 @@ function_descriptors(struct usb_function *f, } /** - * next_ep_desc() - advance to the next EP descriptor + * next_desc() - advance to the next desc_type descriptor * @t: currect pointer within descriptor array + * @desc_type: descriptor type * - * Return: next EP descriptor or NULL + * Return: next desc_type descriptor or NULL * - * Iterate over @t until either EP descriptor found or + * Iterate over @t until either desc_type descriptor found or * NULL (that indicates end of list) encountered */ static struct usb_descriptor_header** -next_ep_desc(struct usb_descriptor_header **t) +next_desc(struct usb_descriptor_header **t, u8 desc_type) { for (; *t; t++) { - if ((*t)->bDescriptorType == USB_DT_ENDPOINT) + if ((*t)->bDescriptorType == desc_type) return t; } return NULL; } /* - * for_each_ep_desc()- iterate over endpoint descriptors in the - * descriptors list - * @start: pointer within descriptor array. - * @ep_desc: endpoint descriptor to use as the loop cursor + * for_each_desc() - iterate over desc_type descriptors in the + * descriptors list + * @start: pointer within descriptor array. + * @iter_desc: desc_type descriptor to use as the loop cursor + * @desc_type: wanted descriptr type */ -#define for_each_ep_desc(start, ep_desc) \ - for (ep_desc = next_ep_desc(start); \ - ep_desc; ep_desc = next_ep_desc(ep_desc+1)) +#define for_each_desc(start, iter_desc, desc_type) \ + for (iter_desc = next_desc(start, desc_type); \ + iter_desc; iter_desc = next_desc(iter_desc + 1, desc_type)) /** - * config_ep_by_speed() - configures the given endpoint + * config_ep_by_speed_and_alt() - configures the given endpoint * according to gadget speed. * @g: pointer to the gadget * @f: usb function * @_ep: the endpoint to configure + * @alt: alternate setting number * * Return: error code, 0 on success * @@ -142,11 +145,13 @@ next_ep_desc(struct usb_descriptor_header **t) * Note: the supplied function should hold all the descriptors * for supported speeds */ -int config_ep_by_speed(struct usb_gadget *g, - struct usb_function *f, - struct usb_ep *_ep) +int config_ep_by_speed_and_alt(struct usb_gadget *g, + struct usb_function *f, + struct usb_ep *_ep, + u8 alt) { struct usb_endpoint_descriptor *chosen_desc = NULL; + struct usb_interface_descriptor *int_desc = NULL; struct usb_descriptor_header **speed_desc = NULL; struct usb_ss_ep_comp_descriptor *comp_desc = NULL; @@ -182,8 +187,21 @@ int config_ep_by_speed(struct usb_gadget *g, default: speed_desc = f->fs_descriptors; } + + /* find correct alternate setting descriptor */ + for_each_desc(speed_desc, d_spd, USB_DT_INTERFACE) { + int_desc = (struct usb_interface_descriptor *)*d_spd; + + if (int_desc->bAlternateSetting == alt) { + speed_desc = d_spd; + goto intf_found; + } + } + return -EIO; + +intf_found: /* find descriptors */ - for_each_ep_desc(speed_desc, d_spd) { + for_each_desc(speed_desc, d_spd, USB_DT_ENDPOINT) { chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; if (chosen_desc->bEndpointAddress == _ep->address) goto ep_found; @@ -237,6 +255,32 @@ int config_ep_by_speed(struct usb_gadget *g, } return 0; } +EXPORT_SYMBOL_GPL(config_ep_by_speed_and_alt); + +/** + * config_ep_by_speed() - configures the given endpoint + * according to gadget speed. + * @g: pointer to the gadget + * @f: usb function + * @_ep: the endpoint to configure + * + * Return: error code, 0 on success + * + * This function chooses the right descriptors for a given + * endpoint according to gadget speed and saves it in the + * endpoint desc field. If the endpoint already has a descriptor + * assigned to it - overwrites it with currently corresponding + * descriptor. The endpoint maxpacket field is updated according + * to the chosen descriptor. + * Note: the supplied function should hold all the descriptors + * for supported speeds + */ +int config_ep_by_speed(struct usb_gadget *g, + struct usb_function *f, + struct usb_ep *_ep) +{ + return config_ep_by_speed_and_alt(g, f, _ep, 0); +} EXPORT_SYMBOL_GPL(config_ep_by_speed); /** diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 8675e145ea8b..2040696d75b6 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -249,6 +249,9 @@ int usb_function_activate(struct usb_function *); int usb_interface_id(struct usb_configuration *, struct usb_function *); +int config_ep_by_speed_and_alt(struct usb_gadget *g, struct usb_function *f, + struct usb_ep *_ep, u8 alt); + int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, struct usb_ep *_ep); -- 2.25.1

From: Borislav Petkov <bp@suse.de> [ Upstream commit de308d1815c9e8fe602a958c5c76142ff6501d75 ] The commit c84cb3735fd5 ("x86/apic: Move TSC deadline timer debug printk") removed the message which said that the deadline timer was enabled. It added a pr_debug() message which is issued when deadline timer validation succeeds. Well, issued only when CONFIG_DYNAMIC_DEBUG is enabled - otherwise pr_debug() calls get optimized away if DEBUG is not defined in the compilation unit. Therefore, make the above message pr_info() so that it is visible in dmesg. Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200525104218.27018-1-bp@alien8.de Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/x86/kernel/apic/apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 10101fcdaa3f..56417e7ab600 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2080,7 +2080,7 @@ void __init init_apic_mappings(void) unsigned int new_apicid; if (apic_validate_deadline_timer()) - pr_debug("TSC deadline timer available\n"); + pr_info("TSC deadline timer available\n"); if (x2apic_mode) { boot_cpu_physical_apicid = read_apic_id(); -- 2.25.1

From: Dan Carpenter <dan.carpenter@oracle.com> [ Upstream commit 9d7464b18892332e35ff37f0b024429a1a9835e6 ] The pr_debug() dereferences "cmd" after we already freed it by calling tcmu_free_cmd(cmd). The debug printk needs to be done earlier. Link: https://lore.kernel.org/r/20200523101129.GB98132@mwanda Fixes: 61fb24822166 ("scsi: target: tcmu: Userspace must not complete queued commands") Reviewed-by: Mike Christie <mchristi@redhat.com> Reviewed-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/target/target_core_user.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index ac523f247a9c..8da89925a874 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -1303,13 +1303,13 @@ static void tcmu_check_expired_queue_cmd(struct tcmu_cmd *cmd) if (!time_after(jiffies, cmd->deadline)) return; + pr_debug("Timing out queued cmd %p on dev %s.\n", + cmd, cmd->tcmu_dev->name); + list_del_init(&cmd->queue_entry); se_cmd = cmd->se_cmd; tcmu_free_cmd(cmd); - pr_debug("Timing out queued cmd %p on dev %s.\n", - cmd, cmd->tcmu_dev->name); - target_complete_cmd(se_cmd, SAM_STAT_TASK_SET_FULL); } -- 2.25.1

From: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> [ Upstream commit 3be60b564de49875e47974c37fabced893cd0931 ] ufs_qcom_dump_dbg_regs() uses usleep_range, a sleeping function, but can be called from atomic context in the following flow: ufshcd_intr -> ufshcd_sl_intr -> ufshcd_check_errors -> ufshcd_print_host_regs -> ufshcd_vops_dbg_register_dump -> ufs_qcom_dump_dbg_regs This causes a boot crash on the Lenovo Miix 630 when the interrupt is handled on the idle thread. Fix the issue by switching to udelay(). Link: https://lore.kernel.org/r/20200525204125.46171-1-jeffrey.l.hugo@gmail.com Fixes: 9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers") Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/scsi/ufs/ufs-qcom.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index 75ee5906b966..21e3ff590ec9 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -1635,11 +1635,11 @@ static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba) /* sleep a bit intermittently as we are dumping too much data */ ufs_qcom_print_hw_debug_reg_all(hba, NULL, ufs_qcom_dump_regs_wrapper); - usleep_range(1000, 1100); + udelay(1000); ufs_qcom_testbus_read(hba); - usleep_range(1000, 1100); + udelay(1000); ufs_qcom_print_unipro_testbus(hba); - usleep_range(1000, 1100); + udelay(1000); } /** -- 2.25.1

From: Chunyan Zhang <chunyan.zhang@unisoc.com> [ Upstream commit c2f30986d418f26abefc2eec90ebf06716c970d2 ] The function _sprd_pll_recalc_rate() defines return value to unsigned long, but it would return a negative value when malloc fail, changing to return its parent_rate makes more sense, since if the callback .recalc_rate() is not set, the framework returns the parent_rate as well. Fixes: 3e37b005580b ("clk: sprd: add adjustable pll support") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lkml.kernel.org/r/20200519030036.1785-2-zhang.lyra@gmail.com Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/clk/sprd/pll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sprd/pll.c b/drivers/clk/sprd/pll.c index 640270f51aa5..eb8862752c2b 100644 --- a/drivers/clk/sprd/pll.c +++ b/drivers/clk/sprd/pll.c @@ -105,7 +105,7 @@ static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll, cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL); if (!cfg) - return -ENOMEM; + return parent_rate; for (i = 0; i < regs_num; i++) cfg[i] = sprd_pll_read(pll, i); -- 2.25.1

From: Olga Kornievskaia <olga.kornievskaia@gmail.com> [ Upstream commit 1c709b766e73e54d64b1dde1b7cfbcf25bcb15b9 ] Fixes: 02a95dee8cf0 ("NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index eec3b4f10317..33fe436fe19e 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -7615,7 +7615,7 @@ nfs4_bind_one_conn_to_session_done(struct rpc_task *task, void *calldata) } static const struct rpc_call_ops nfs4_bind_one_conn_to_session_ops = { - .rpc_call_done = &nfs4_bind_one_conn_to_session_done, + .rpc_call_done = nfs4_bind_one_conn_to_session_done, }; /* -- 2.25.1

From: huhai <huhai@tj.kylinos.cn> [ Upstream commit bcec081ecc940fc38730b29c743bbee661164161 ] Signed-off-by: huhai <huhai@tj.kylinos.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200521072648.1254699-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/powerpc/platforms/4xx/pci.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/4xx/pci.c index 5aca523551ae..2f237027fdcc 100644 --- a/arch/powerpc/platforms/4xx/pci.c +++ b/arch/powerpc/platforms/4xx/pci.c @@ -1242,7 +1242,7 @@ static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port) if (mbase == NULL) { printk(KERN_ERR "%pOF: Can't map internal config space !", port->node); - goto done; + return; } while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA) @@ -1252,9 +1252,7 @@ static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port) } if (attempt) port->link = 1; -done: iounmap(mbase); - } static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = { -- 2.25.1

From: Xiyu Yang <xiyuyang19@fudan.edu.cn> [ Upstream commit 36124fb19f1ae68a500cd76a76d40c6e81bee346 ] fsl_asrc_dma_hw_params() invokes dma_request_channel() or fsl_asrc_get_dma_channel(), which returns a reference of the specified dma_chan object to "pair->dma_chan[dir]" with increased refcnt. The reference counting issue happens in one exception handling path of fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End, the function forgets to decrease the refcnt increased by dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt leak. Fix this issue by calling dma_release_channel() when config DMA channel failed. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan... Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- sound/soc/fsl/fsl_asrc_dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c index 1033ac6631b0..b9ac448989ed 100644 --- a/sound/soc/fsl/fsl_asrc_dma.c +++ b/sound/soc/fsl/fsl_asrc_dma.c @@ -241,6 +241,7 @@ static int fsl_asrc_dma_hw_params(struct snd_pcm_substream *substream, ret = dmaengine_slave_config(pair->dma_chan[dir], &config_be); if (ret) { dev_err(dev, "failed to config DMA channel for Back-End\n"); + dma_release_channel(pair->dma_chan[dir]); return ret; } -- 2.25.1

From: David Howells <dhowells@redhat.com> [ Upstream commit 32f71aa497cfb23d37149c2ef16ad71fce2e45e2 ] The user ID value isn't actually much use - and leaks a kernel pointer or a userspace value - so replace it with the call debug ID, which appears in trace points. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- net/rxrpc/proc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/rxrpc/proc.c b/net/rxrpc/proc.c index 9805e3b85c36..81a765dd8c9b 100644 --- a/net/rxrpc/proc.c +++ b/net/rxrpc/proc.c @@ -72,7 +72,7 @@ static int rxrpc_call_seq_show(struct seq_file *seq, void *v) "Proto Local " " Remote " " SvID ConnID CallID End Use State Abort " - " UserID TxSeq TW RxSeq RW RxSerial RxTimo\n"); + " DebugId TxSeq TW RxSeq RW RxSerial RxTimo\n"); return 0; } @@ -104,7 +104,7 @@ static int rxrpc_call_seq_show(struct seq_file *seq, void *v) rx_hard_ack = READ_ONCE(call->rx_hard_ack); seq_printf(seq, "UDP %-47.47s %-47.47s %4x %08x %08x %s %3u" - " %-8.8s %08x %lx %08x %02x %08x %02x %08x %06lx\n", + " %-8.8s %08x %08x %08x %02x %08x %02x %08x %06lx\n", lbuff, rbuff, call->service_id, @@ -114,7 +114,7 @@ static int rxrpc_call_seq_show(struct seq_file *seq, void *v) atomic_read(&call->usage), rxrpc_call_states[call->state], call->abort_code, - call->user_call_ID, + call->debug_id, tx_hard_ack, READ_ONCE(call->tx_top) - tx_hard_ack, rx_hard_ack, READ_ONCE(call->rx_top) - rx_hard_ack, call->rx_serial, -- 2.25.1

From: Bob Peterson <rpeterso@redhat.com> [ Upstream commit ea22eee4e6027d8927099de344f7fff43c507ef9 ] Before this patch, a simple typo accidentally added \n to the jid= string for lock_nolock mounts. This made it impossible to mount a gfs2 file system with a journal other than journal0. Thus: mount -tgfs2 -o hostdata="jid=1" <device> <mount pt> Resulted in: mount: wrong fs type, bad option, bad superblock on <device> In most cases this is not a problem. However, for debugging and testing purposes we sometimes want to test the integrity of other journals. This patch removes the unnecessary \n and thus allows lock_nolock users to specify an alternate journal. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- fs/gfs2/ops_fstype.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index b041cb8ae383..ed77b10bdfb5 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -903,7 +903,7 @@ static int init_per_node(struct gfs2_sbd *sdp, int undo) } static const match_table_t nolock_tokens = { - { Opt_jid, "jid=%d\n", }, + { Opt_jid, "jid=%d", }, { Opt_err, NULL }, }; -- 2.25.1

From: Can Guo <cang@codeaurora.org> [ Upstream commit be32acff43800c87dc5c707f5d47cc607b76b653 ] Urgent bkops level is used to compare against actual bkops status read from UFS device. Urgent bkops level is set during initialization and might be updated in exception event handler during runtime. But it should not be updated to the actual bkops status every time when auto bkops is toggled. Otherwise, if urgent bkops level is updated to 0, auto bkops shall always be kept enabled. Link: https://lore.kernel.org/r/1590632686-17866-1-git-send-email-cang@codeaurora.... Fixes: 24366c2afbb0 ("scsi: ufs: Recheck bkops level if bkops is disabled") Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/scsi/ufs/ufshcd.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 803d67b3a166..bd21c9cdf818 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -5122,7 +5122,6 @@ static int ufshcd_bkops_ctrl(struct ufs_hba *hba, err = ufshcd_enable_auto_bkops(hba); else err = ufshcd_disable_auto_bkops(hba); - hba->urgent_bkops_lvl = curr_status; out: return err; } -- 2.25.1

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> [ Upstream commit 11d8da5cabf7c6c3263ba2cd9c00260395867048 ] 'pinctrl_unregister()' should not be called to undo 'devm_pinctrl_register_and_init()', it is already handled by the framework. This simplifies the error handling paths of the probe function. The 'imx_free_resources()' can be removed as well. Fixes: a51c158bf0f7 ("pinctrl: imx: use radix trees for groups and functions") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20200530204955.588962-1-christophe.jaillet@wanadoo... Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/pinctrl/freescale/pinctrl-imx.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index b04edc22dad7..90d414dd792c 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -662,16 +662,6 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev, return 0; } -/* - * imx_free_resources() - free memory used by this driver - * @info: info driver instance - */ -static void imx_free_resources(struct imx_pinctrl *ipctl) -{ - if (ipctl->pctl) - pinctrl_unregister(ipctl->pctl); -} - int imx_pinctrl_probe(struct platform_device *pdev, const struct imx_pinctrl_soc_info *info) { @@ -762,21 +752,16 @@ int imx_pinctrl_probe(struct platform_device *pdev, &ipctl->pctl); if (ret) { dev_err(&pdev->dev, "could not register IMX pinctrl driver\n"); - goto free; + return ret; } ret = imx_pinctrl_probe_dt(pdev, ipctl); if (ret) { dev_err(&pdev->dev, "fail to probe dt properties\n"); - goto free; + return ret; } dev_info(&pdev->dev, "initialized IMX pinctrl driver\n"); return pinctrl_enable(ipctl->pctl); - -free: - imx_free_resources(ipctl); - - return ret; } -- 2.25.1

From: Jiri Benc <jbenc@redhat.com> [ Upstream commit 9d149045b3c0e44c049cdbce8a64e19415290017 ] If the geneve interface is in collect_md (external) mode, it can't send any packets submitted directly to its net interface, as such packets won't have metadata attached. This is expected. However, the kernel itself sends some packets to the interface, most notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong, as tunnel metadata can be specified in routing table (although technically, that has never worked for IPv6, but hopefully will be fixed eventually) and then the interface must correctly participate in IPv6 housekeeping. The problem is that any such attempt increases the tx_error counter. Just bringing up a geneve interface with IPv6 enabled is enough to see a number of tx_errors. That causes confusion among users, prompting them to find a network error where there is none. Change the counter used to tx_dropped. That better conveys the meaning (there's nothing wrong going on, just some packets are getting dropped) and hopefully will make admins panic less. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/net/geneve.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 36444de701cd..817c290b78cd 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -911,9 +911,10 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev) if (geneve->collect_md) { info = skb_tunnel_info(skb); if (unlikely(!info || !(info->mode & IP_TUNNEL_INFO_TX))) { - err = -EINVAL; netdev_dbg(dev, "no tunnel metadata\n"); - goto tx_error; + dev_kfree_skb(skb); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; } } else { info = &geneve->info; @@ -930,7 +931,7 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev) if (likely(!err)) return NETDEV_TX_OK; -tx_error: + dev_kfree_skb(skb); if (err == -ELOOP) -- 2.25.1

From: Arnd Bergmann <arnd@arndb.de> [ Upstream commit bd93f003b7462ae39a43c531abca37fe7073b866 ] Clang normally does not warn about certain issues in inline functions when it only happens in an eliminated code path. However if something else goes wrong, it does tend to complain about the definition of hweight_long() on 32-bit targets: include/linux/bitops.h:75:41: error: shift count >= width of type [-Werror,-Wshift-count-overflow] return sizeof(w) == 4 ? hweight32(w) : hweight64(w); ^~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:29:49: note: expanded from macro 'hweight64' define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w)) ^~~~~~~~~~~~~~~~~~~~ include/asm-generic/bitops/const_hweight.h:21:76: note: expanded from macro '__const_hweight64' define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32)) ^ ~~ include/asm-generic/bitops/const_hweight.h:20:49: note: expanded from macro '__const_hweight32' define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16)) ^ include/asm-generic/bitops/const_hweight.h:19:72: note: expanded from macro '__const_hweight16' define __const_hweight16(w) (__const_hweight8(w) + __const_hweight8((w) >> 8 )) ^ include/asm-generic/bitops/const_hweight.h:12:9: note: expanded from macro '__const_hweight8' (!!((w) & (1ULL << 2))) + \ Adding an explicit cast to __u64 avoids that warning and makes it easier to read other output. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lkml.kernel.org/r/20200505135513.65265-1-arnd@arndb.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- include/linux/bitops.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/bitops.h b/include/linux/bitops.h index 553df929de6c..8f3dbe84baf2 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -50,7 +50,7 @@ static inline int get_bitmask_order(unsigned int count) static __always_inline unsigned long hweight_long(unsigned long w) { - return sizeof(w) == 4 ? hweight32(w) : hweight64(w); + return sizeof(w) == 4 ? hweight32(w) : hweight64((__u64)w); } /** -- 2.25.1

From: Ram Pai <linuxram@us.ibm.com> [ Upstream commit 6e373263ce07eeaa6410843179535fbdf561fc31 ] alloc_random_pkey() was allocating the same pkey every time. Not all pkeys were geting tested. This fixes it. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/0162f55816d4e783a0d6e49e554d0ab9a3c9a23b.1585646528... Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- tools/testing/selftests/x86/protection_keys.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/x86/protection_keys.c b/tools/testing/selftests/x86/protection_keys.c index 5d546dcdbc80..b8778960da10 100644 --- a/tools/testing/selftests/x86/protection_keys.c +++ b/tools/testing/selftests/x86/protection_keys.c @@ -24,6 +24,7 @@ #define _GNU_SOURCE #include <errno.h> #include <linux/futex.h> +#include <time.h> #include <sys/time.h> #include <sys/syscall.h> #include <string.h> @@ -612,10 +613,10 @@ int alloc_random_pkey(void) int nr_alloced = 0; int random_index; memset(alloced_pkeys, 0, sizeof(alloced_pkeys)); + srand((unsigned int)time(NULL)); /* allocate every possible key and make a note of which ones we got */ max_nr_pkey_allocs = NR_PKEYS; - max_nr_pkey_allocs = 1; for (i = 0; i < max_nr_pkey_allocs; i++) { int new_pkey = alloc_pkey(); if (new_pkey < 0) -- 2.25.1

From: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> [ Upstream commit 71df3fd82e7cccec7b749a8607a4662d9f7febdd ] In function get_pdu_len() replace variable type from __u64 to __be64. This fixes sparse warning. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- kernel/trace/blktrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 89656b6bc600..8ab102ba25b4 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1270,7 +1270,7 @@ static inline __u16 t_error(const struct trace_entry *ent) static __u64 get_pdu_int(const struct trace_entry *ent, bool has_cg) { - const __u64 *val = pdu_start(ent, has_cg); + const __be64 *val = pdu_start(ent, has_cg); return be64_to_cpu(*val); } -- 2.25.1

From: Bob Peterson <rpeterso@redhat.com> [ Upstream commit 83d060ca8d90fa1e3feac227f995c013100862d3 ] Before this patch, transactions could be merged into the system transaction by function gfs2_merge_trans(), but the transaction ail lists were never merged. Because the ail flushing mechanism can run separately, bd elements can be attached to the transaction's buffer list during the transaction (trans_add_meta, etc) but quickly moved to its ail lists. Later, in function gfs2_trans_end, the transaction can be freed (by gfs2_trans_end) while it still has bd elements queued to its ail lists, which can cause it to either lose track of the bd elements altogether (memory leak) or worse, reference the bd elements after the parent transaction has been freed. Although I've not seen any serious consequences, the problem becomes apparent with the previous patch's addition of: gfs2_assert_warn(sdp, list_empty(&tr->tr_ail1_list)); to function gfs2_trans_free(). This patch adds logic into gfs2_merge_trans() to move the merged transaction's ail lists to the sdp transaction. This prevents the use-after-free. To do this properly, we need to hold the ail lock, so we pass sdp into the function instead of the transaction itself. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- fs/gfs2/log.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index d3f0612e3347..06752db213d2 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -877,8 +877,10 @@ void gfs2_log_flush(struct gfs2_sbd *sdp, struct gfs2_glock *gl, u32 flags) * @new: New transaction to be merged */ -static void gfs2_merge_trans(struct gfs2_trans *old, struct gfs2_trans *new) +static void gfs2_merge_trans(struct gfs2_sbd *sdp, struct gfs2_trans *new) { + struct gfs2_trans *old = sdp->sd_log_tr; + WARN_ON_ONCE(!test_bit(TR_ATTACHED, &old->tr_flags)); old->tr_num_buf_new += new->tr_num_buf_new; @@ -890,6 +892,11 @@ static void gfs2_merge_trans(struct gfs2_trans *old, struct gfs2_trans *new) list_splice_tail_init(&new->tr_databuf, &old->tr_databuf); list_splice_tail_init(&new->tr_buf, &old->tr_buf); + + spin_lock(&sdp->sd_ail_lock); + list_splice_tail_init(&new->tr_ail1_list, &old->tr_ail1_list); + list_splice_tail_init(&new->tr_ail2_list, &old->tr_ail2_list); + spin_unlock(&sdp->sd_ail_lock); } static void log_refund(struct gfs2_sbd *sdp, struct gfs2_trans *tr) @@ -901,7 +908,7 @@ static void log_refund(struct gfs2_sbd *sdp, struct gfs2_trans *tr) gfs2_log_lock(sdp); if (sdp->sd_log_tr) { - gfs2_merge_trans(sdp->sd_log_tr, tr); + gfs2_merge_trans(sdp, tr); } else if (tr->tr_num_buf_new || tr->tr_num_databuf_new) { gfs2_assert_withdraw(sdp, test_bit(TR_ALLOCED, &tr->tr_flags)); sdp->sd_log_tr = tr; -- 2.25.1

From: Sanjay R Mehta <sanju.mehta@amd.com> [ Upstream commit 433efe720674efd9fdbcef78be75793393cf05db ] Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/ntb/test/ntb_tool.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c index d592c0ffbd19..025747c1568e 100644 --- a/drivers/ntb/test/ntb_tool.c +++ b/drivers/ntb/test/ntb_tool.c @@ -590,7 +590,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx, inmw->size = min_t(resource_size_t, req_size, size); inmw->size = round_up(inmw->size, addr_align); inmw->size = round_up(inmw->size, size_align); - inmw->mm_base = dma_alloc_coherent(&tc->ntb->dev, inmw->size, + inmw->mm_base = dma_alloc_coherent(&tc->ntb->pdev->dev, inmw->size, &inmw->dma_base, GFP_KERNEL); if (!inmw->mm_base) return -ENOMEM; @@ -612,7 +612,7 @@ static int tool_setup_mw(struct tool_ctx *tc, int pidx, int widx, return 0; err_free_dma: - dma_free_coherent(&tc->ntb->dev, inmw->size, inmw->mm_base, + dma_free_coherent(&tc->ntb->pdev->dev, inmw->size, inmw->mm_base, inmw->dma_base); inmw->mm_base = NULL; inmw->dma_base = 0; @@ -629,7 +629,7 @@ static void tool_free_mw(struct tool_ctx *tc, int pidx, int widx) if (inmw->mm_base != NULL) { ntb_mw_clear_trans(tc->ntb, pidx, widx); - dma_free_coherent(&tc->ntb->dev, inmw->size, + dma_free_coherent(&tc->ntb->pdev->dev, inmw->size, inmw->mm_base, inmw->dma_base); } -- 2.25.1

From: Logan Gunthorpe <logang@deltatee.com> [ Upstream commit 40da7d9a93c8941737ef4a1208d32c13ce017fe1 ] Commit 417cf39cfea9 ("NTB: Set dma mask and dma coherent mask to NTB devices") started using the NTB device for DMA allocations which was turns out was wrong. If the IOMMU is enabled, such alloctanions will always fail with messages such as: DMAR: Allocating domain for 0000:02:00.1 failed This is because the IOMMU has not setup the device for such use. Change the tools back to using the PCI device for allocations seeing it doesn't make sense to add an IOMMU group for the non-physical NTB device. Also remove the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/ntb/ntb.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ntb/ntb.c b/drivers/ntb/ntb.c index c9a0912b175f..f8f75a504a58 100644 --- a/drivers/ntb/ntb.c +++ b/drivers/ntb/ntb.c @@ -311,4 +311,3 @@ static void __exit ntb_driver_exit(void) bus_unregister(&ntb_bus); } module_exit(ntb_driver_exit); - -- 2.25.1

From: Logan Gunthorpe <logang@deltatee.com> [ Upstream commit b54369a248c2e033bfcf5d6917e08cf9d73d54a6 ] Legacy drivers do not have port numbers (but is reliably only two ports) and was broken by the recent commit that added mult-port support to ntb_perf. This is especially important to support the cross link topology which is perfectly symmetric and cannot assign unique port numbers easily. Hardware that returns zero for both the local port and the peer should just always use gidx=0 for the only peer. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/ntb/test/ntb_perf.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index 28d288ff3bae..62a9a1d44f9f 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -1418,6 +1418,16 @@ static int perf_init_peers(struct perf_ctx *perf) if (perf->gidx == -1) perf->gidx = pidx; + /* + * Hardware with only two ports may not have unique port + * numbers. In this case, the gidxs should all be zero. + */ + if (perf->pcnt == 1 && ntb_port_number(perf->ntb) == 0 && + ntb_peer_port_number(perf->ntb, 0) == 0) { + perf->gidx = 0; + perf->peers[0].gidx = 0; + } + for (pidx = 0; pidx < perf->pcnt; pidx++) { ret = perf_setup_peer_mw(&perf->peers[pidx]); if (ret) -- 2.25.1

From: Logan Gunthorpe <logang@deltatee.com> [ Upstream commit 2130c0ba69d69bb21f5c52787f2587db00d13d8a ] When remote files are counted in get_files_count, without using SSH, the code returns 0 because there is a colon prepended to $LOC. $VPATH should have been used instead of $LOC. Fixes: 06bd0407d06c ("NTB: ntb_test: Update ntb_tool Scratchpad tests") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Allen Hubbe <allenbh@gmail.com> Tested-by: Alexander Fomichev <fomichev.ru@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- tools/testing/selftests/ntb/ntb_test.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh index 08cbfbbc7029..17ca36403d04 100755 --- a/tools/testing/selftests/ntb/ntb_test.sh +++ b/tools/testing/selftests/ntb/ntb_test.sh @@ -250,7 +250,7 @@ function get_files_count() split_remote $LOC if [[ "$REMOTE" == "" ]]; then - echo $(ls -1 "$LOC"/${NAME}* 2>/dev/null | wc -l) + echo $(ls -1 "$VPATH"/${NAME}* 2>/dev/null | wc -l) else echo $(ssh "$REMOTE" "ls -1 \"$VPATH\"/${NAME}* | \ wc -l" 2> /dev/null) -- 2.25.1

From: tannerlove <tannerlove@google.com> [ Upstream commit 8027bc0307ce59759b90679fa5d8b22949586d20 ] If user passed an interface option longer than 15 characters, then device.ifr_name and hwtstamp.ifr_name became non-null-terminated strings. The compiler warned about this: timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \ destination size [-Wstringop-truncation] 353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name)); Fixes: cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- .../selftests/networking/timestamping/timestamping.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/networking/timestamping/timestamping.c b/tools/testing/selftests/networking/timestamping/timestamping.c index 5cdfd743447b..900ed4b47899 100644 --- a/tools/testing/selftests/networking/timestamping/timestamping.c +++ b/tools/testing/selftests/networking/timestamping/timestamping.c @@ -332,10 +332,16 @@ int main(int argc, char **argv) int val; socklen_t len; struct timeval next; + size_t if_len; if (argc < 2) usage(0); interface = argv[1]; + if_len = strlen(interface); + if (if_len >= IFNAMSIZ) { + printf("interface name exceeds IFNAMSIZ\n"); + exit(1); + } for (i = 2; i < argc; i++) { if (!strcasecmp(argv[i], "SO_TIMESTAMP")) @@ -369,12 +375,12 @@ int main(int argc, char **argv) bail("socket"); memset(&device, 0, sizeof(device)); - strncpy(device.ifr_name, interface, sizeof(device.ifr_name)); + memcpy(device.ifr_name, interface, if_len + 1); if (ioctl(sock, SIOCGIFADDR, &device) < 0) bail("getting interface IP address"); memset(&hwtstamp, 0, sizeof(hwtstamp)); - strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name)); + memcpy(hwtstamp.ifr_name, interface, if_len + 1); hwtstamp.ifr_data = (void *)&hwconfig; memset(&hwconfig, 0, sizeof(hwconfig)); hwconfig.tx_type = -- 2.25.1

From: Bard Liao <yung-chuan.liao@linux.intel.com> [ Upstream commit 607fa205a7e4dfad28b8a67ab1c985756ddbccb0 ] Additional checks for valid DAIs expose a corner case, where existing BE dailinks get modified, e.g. HDMI links are tagged with dpcm_capture=1 even if the DAIs are for playback. This patch makes those changes conditional and flags configuration issues when a BE dailink is has no_pcm=0 but dpcm_playback or dpcm_capture=1 (which makes no sense). As discussed on the alsa-devel mailing list, there are redundant flags for dpcm_playback, dpcm_capture, playback_only, capture_only. This will have to be cleaned-up in a future update. For now only correct and flag problematic configurations. Fixes: 218fe9b7ec7f3 ("ASoC: soc-core: Set dpcm_playback / dpcm_capture") Suggested-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200608194415.4663-3-pierre-louis.bossart@linux.i... Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- sound/soc/soc-core.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index e45dfcb62b6a..595fe20bbc6d 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1920,9 +1920,25 @@ static void soc_check_tplg_fes(struct snd_soc_card *card) dai_link->platform_name = component->name; /* convert non BE into BE */ - dai_link->no_pcm = 1; - dai_link->dpcm_playback = 1; - dai_link->dpcm_capture = 1; + if (!dai_link->no_pcm) { + dai_link->no_pcm = 1; + + if (dai_link->dpcm_playback) + dev_warn(card->dev, + "invalid configuration, dailink %s has flags no_pcm=0 and dpcm_playback=1\n", + dai_link->name); + if (dai_link->dpcm_capture) + dev_warn(card->dev, + "invalid configuration, dailink %s has flags no_pcm=0 and dpcm_capture=1\n", + dai_link->name); + + /* convert normal link into DPCM one */ + if (!(dai_link->dpcm_playback || + dai_link->dpcm_capture)) { + dai_link->dpcm_playback = !dai_link->capture_only; + dai_link->dpcm_capture = !dai_link->playback_only; + } + } /* override any BE fixups */ dai_link->be_hw_params_fixup = -- 2.25.1

From: Hans de Goede <hdegoede@redhat.com> [ Upstream commit 79d4f823a06796656289f97b922493da5690e46c ] The Asus T101HA uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like the Asus T100HA. Note unlike the T100HA its jack-detect is not inverted. Add a DMI quirk with the correct settings for this model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200608204634.93407-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- sound/soc/codecs/rt5645.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 7e3b47eeea04..9185bd7c5a6d 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3656,6 +3656,12 @@ static const struct rt5645_platform_data asus_t100ha_platform_data = { .inv_jd1_1 = true, }; +static const struct rt5645_platform_data asus_t101ha_platform_data = { + .dmic1_data_pin = RT5645_DMIC_DATA_IN2N, + .dmic2_data_pin = RT5645_DMIC2_DISABLE, + .jd_mode = 3, +}; + static const struct rt5645_platform_data lenovo_ideapad_miix_310_pdata = { .jd_mode = 3, .in2_diff = true, @@ -3733,6 +3739,14 @@ static const struct dmi_system_id dmi_platform_data[] = { }, .driver_data = (void *)&asus_t100ha_platform_data, }, + { + .ident = "ASUS T101HA", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "T101HA"), + }, + .driver_data = (void *)&asus_t101ha_platform_data, + }, { .ident = "MINIX Z83-4", .matches = { -- 2.25.1

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> [ Upstream commit 42c76c9848e13dbe0538d7ae0147a269dfa859cb ] 'ret' is known to be 0 at this point. Explicitly return -ENOMEM if one of the 'ecardm_iomap()' calls fail. Link: https://lore.kernel.org/r/20200530081622.577888-1-christophe.jaillet@wanadoo... Fixes: e95a1b656a98 ("[ARM] rpc: acornscsi: update to new style ecard driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/scsi/arm/acornscsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index 421fe869a11e..ef9d907f2df5 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -2914,8 +2914,10 @@ static int acornscsi_probe(struct expansion_card *ec, const struct ecard_id *id) ashost->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); ashost->fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); - if (!ashost->base || !ashost->fast) + if (!ashost->base || !ashost->fast) { + ret = -ENOMEM; goto out_put; + } host->irq = ec->irq; ashost->host = host; -- 2.25.1

From: YiFei Zhu <zhuyifei1999@gmail.com> [ Upstream commit 0f5d82f187e1beda3fe7295dfc500af266a5bd80 ] Added a check in the switch case on start_header that checks for the existence of the header, and in the case that MAC is not set and the caller requests for MAC, -EFAULT. If the caller requests for NET then MAC's existence is completely ignored. There is no function to check NET header's existence and as far as cgroup_skb/egress is concerned it should always be set. Removed for ptr >= the start of header, considering offset is bounded unsigned and should always be true. len <= end - mac is redundant to ptr + len <= end. Fixes: 3eee1f75f2b9 ("bpf: fix bpf_skb_load_bytes_relative pkt length check") Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/76bb820ddb6a95f59a772ecbd8c8a336f646b362.1591812... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- net/core/filter.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index 4d6c5a53e42a..1027ea5e12da 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1730,25 +1730,27 @@ BPF_CALL_5(bpf_skb_load_bytes_relative, const struct sk_buff *, skb, u32, offset, void *, to, u32, len, u32, start_header) { u8 *end = skb_tail_pointer(skb); - u8 *net = skb_network_header(skb); - u8 *mac = skb_mac_header(skb); - u8 *ptr; + u8 *start, *ptr; - if (unlikely(offset > 0xffff || len > (end - mac))) + if (unlikely(offset > 0xffff)) goto err_clear; switch (start_header) { case BPF_HDR_START_MAC: - ptr = mac + offset; + if (unlikely(!skb_mac_header_was_set(skb))) + goto err_clear; + start = skb_mac_header(skb); break; case BPF_HDR_START_NET: - ptr = net + offset; + start = skb_network_header(skb); break; default: goto err_clear; } - if (likely(ptr >= mac && ptr + len <= end)) { + ptr = start + offset; + + if (likely(ptr + len <= end)) { memcpy(to, ptr, len); return 0; } -- 2.25.1

From: Qais Yousef <qais.yousef@arm.com> [ Upstream commit 79112cc3c29f4a8c73a21428fbcbcb0afb005e3e ] Follow suit of ohci-platform.c and perform pm_runtime_set_active() on resume. ohci-platform.c had a warning reported due to the missing pm_runtime_set_active() [1]. [1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cam... Signed-off-by: Qais Yousef <qais.yousef@arm.com> CC: Tony Prisk <linux@prisktech.co.nz> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Mathias Nyman <mathias.nyman@intel.com> CC: Oliver Neukum <oneukum@suse.de> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-2-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/usb/host/xhci-plat.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index adc437ca83b8..65972c186c64 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -408,7 +408,15 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) if (ret) return ret; - return xhci_resume(xhci, 0); + ret = xhci_resume(xhci, 0); + if (ret) + return ret; + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; } static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) -- 2.25.1

From: Qais Yousef <qais.yousef@arm.com> [ Upstream commit 16bdc04cc98ab0c74392ceef2475ecc5e73fcf49 ] Follow suit of ohci-platform.c and perform pm_runtime_set_active() on resume. ohci-platform.c had a warning reported due to the missing pm_runtime_set_active() [1]. [1] https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cam... Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Qais Yousef <qais.yousef@arm.com> CC: Tony Prisk <linux@prisktech.co.nz> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Mathias Nyman <mathias.nyman@intel.com> CC: Oliver Neukum <oneukum@suse.de> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-3-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/usb/host/ehci-platform.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 8a45362155c5..cbc45941a699 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -457,6 +457,10 @@ static int ehci_platform_resume(struct device *dev) ehci_resume(hcd, priv->reset_on_resume); + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + if (priv->quirk_poll) quirk_poll_init(priv); -- 2.25.1

From: David Howells <dhowells@redhat.com> [ Upstream commit bb413489288e4e457353bac513fddb6330d245ca ] The mtime on an inode needs to be updated when a write is made into an mmap'ed section. There are three ways in which this could be done: update it when page_mkwrite is called, update it when a page is changed from dirty to writeback or leave it to the server and fix the mtime up from the reply to the StoreData RPC. Found with the generic/215 xfstest. Fixes: 1cf7a1518aef ("afs: Implement shared-writeable mmap") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- fs/afs/write.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/afs/write.c b/fs/afs/write.c index e00461a6de9a..53f329f61cc3 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -792,6 +792,7 @@ vm_fault_t afs_page_mkwrite(struct vm_fault *vmf) vmf->page->index, priv); SetPagePrivate(vmf->page); set_page_private(vmf->page, priv); + file_update_time(file); sb_end_pagefault(inode->i_sb); return VM_FAULT_LOCKED; -- 2.25.1

From: Will Deacon <will@kernel.org> [ Upstream commit 24ebec25fb270100e252b19c288e21bd7d8cc7f7 ] Unprivileged memory accesses generated by the so-called "translated" instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire unexpectedly if kernel debugging is enabled. In such cases, the hw_breakpoint logic will invoke the user overflow handler which will typically raise a SIGTRAP back to the current task. This is futile when returning back to the kernel because (a) the signal won't have been delivered and (b) userspace can't handle the thing anyway. Avoid invoking the user overflow handler for watchpoints triggered by kernel uaccess routines, and instead single-step over the faulting instruction as we would if no overflow handler had been installed. (Fixes tag identifies the introduction of unprivileged memory accesses, which exposed this latent bug in the hw_breakpoint code) Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Fixes: 57f4959bad0a ("arm64: kernel: Add support for User Access Override") Reported-by: Luis Machado <luis.machado@linaro.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/arm64/kernel/hw_breakpoint.c | 44 ++++++++++++++++++------------- 1 file changed, 26 insertions(+), 18 deletions(-) diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c index 7c0611f5d2ce..9f105fe58595 100644 --- a/arch/arm64/kernel/hw_breakpoint.c +++ b/arch/arm64/kernel/hw_breakpoint.c @@ -737,6 +737,27 @@ static u64 get_distance_from_watchpoint(unsigned long addr, u64 val, return 0; } +static int watchpoint_report(struct perf_event *wp, unsigned long addr, + struct pt_regs *regs) +{ + int step = is_default_overflow_handler(wp); + struct arch_hw_breakpoint *info = counter_arch_bp(wp); + + info->trigger = addr; + + /* + * If we triggered a user watchpoint from a uaccess routine, then + * handle the stepping ourselves since userspace really can't help + * us with this. + */ + if (!user_mode(regs) && info->ctrl.privilege == AARCH64_BREAKPOINT_EL0) + step = 1; + else + perf_bp_event(wp, regs); + + return step; +} + static int watchpoint_handler(unsigned long addr, unsigned int esr, struct pt_regs *regs) { @@ -746,7 +767,6 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr, u64 val; struct perf_event *wp, **slots; struct debug_info *debug_info; - struct arch_hw_breakpoint *info; struct arch_hw_breakpoint_ctrl ctrl; slots = this_cpu_ptr(wp_on_reg); @@ -784,25 +804,13 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr, if (dist != 0) continue; - info = counter_arch_bp(wp); - info->trigger = addr; - perf_bp_event(wp, regs); - - /* Do we need to handle the stepping? */ - if (is_default_overflow_handler(wp)) - step = 1; + step = watchpoint_report(wp, addr, regs); } - if (min_dist > 0 && min_dist != -1) { - /* No exact match found. */ - wp = slots[closest_match]; - info = counter_arch_bp(wp); - info->trigger = addr; - perf_bp_event(wp, regs); - /* Do we need to handle the stepping? */ - if (is_default_overflow_handler(wp)) - step = 1; - } + /* No exact match found? */ + if (min_dist > 0 && min_dist != -1) + step = watchpoint_report(slots[closest_match], addr, regs); + rcu_read_unlock(); if (!step) -- 2.25.1

From: Wolfram Sang <wsa+renesas@sang-engineering.com> [ Upstream commit f78d4032de60f50fd4afaa0fb68ea03b985f820a ] module_put() balances try_module_get(), not request_module(). Fix the error path to match that. Fixes: 2066facca4c7 ("drm/kms: slave encoder interface.") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/gpu/drm/drm_encoder_slave.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_encoder_slave.c b/drivers/gpu/drm/drm_encoder_slave.c index cf804389f5ec..d50a7884e69e 100644 --- a/drivers/gpu/drm/drm_encoder_slave.c +++ b/drivers/gpu/drm/drm_encoder_slave.c @@ -84,7 +84,7 @@ int drm_i2c_encoder_init(struct drm_device *dev, err = encoder_drv->encoder_init(client, dev, encoder); if (err) - goto fail_unregister; + goto fail_module_put; if (info->platform_data) encoder->slave_funcs->set_config(&encoder->base, @@ -92,9 +92,10 @@ int drm_i2c_encoder_init(struct drm_device *dev, return 0; +fail_module_put: + module_put(module); fail_unregister: i2c_unregister_device(client); - module_put(module); fail: return err; } -- 2.25.1

From: Huacai Chen <chenhc@lemote.com> commit 80e5f89da3ab949fbbf1cae01dfaea29f5483a75 upstream. The command ring and cursor ring use different notify port addresses definition: QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR. However, in qxl_device_init() we use QXL_IO_NOTIFY_CMD to create both command ring and cursor ring. This doesn't cause any problems now, because QEMU's behaviors on QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR are the same. However, QEMU's behavior may be change in future, so let's fix it. P.S.: In the X.org QXL driver, the notify port address of cursor ring is correct. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: <stable@vger.kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/1585635488-17507-1-git-send-ema... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/gpu/drm/qxl/qxl_kms.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c index 771250aed78d..2412d317d992 100644 --- a/drivers/gpu/drm/qxl/qxl_kms.c +++ b/drivers/gpu/drm/qxl/qxl_kms.c @@ -181,7 +181,7 @@ int qxl_device_init(struct qxl_device *qdev, &(qdev->ram_header->cursor_ring_hdr), sizeof(struct qxl_command), QXL_CURSOR_RING_SIZE, - qdev->io_base + QXL_IO_NOTIFY_CMD, + qdev->io_base + QXL_IO_NOTIFY_CURSOR, false, &qdev->cursor_event); -- 2.25.1

From: Tom Rix <trix@redhat.com> commit 65de50969a77509452ae590e9449b70a22b923bb upstream. Clang's static analysis tool reports these double free memory errors. security/selinux/ss/services.c:2987:4: warning: Attempt to free released memory [unix.Malloc] kfree(bnames[i]); ^~~~~~~~~~~~~~~~ security/selinux/ss/services.c:2990:2: warning: Attempt to free released memory [unix.Malloc] kfree(bvalues); ^~~~~~~~~~~~~~ So improve the security_get_bools error handling by freeing these variables and setting their return pointers to NULL and the return len to 0 Cc: stable@vger.kernel.org Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- security/selinux/ss/services.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index f3def298a90e..a9f2bc8443bd 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -2857,8 +2857,12 @@ int security_get_bools(struct selinux_state *state, if (*names) { for (i = 0; i < *len; i++) kfree((*names)[i]); + kfree(*names); } kfree(*values); + *len = 0; + *names = NULL; + *values = NULL; goto out; } -- 2.25.1

From: Theodore Ts'o <tytso@mit.edu> [ Upstream commit 829b37b8cddb1db75c1b7905505b90e593b15db1 ] Trying to change dax mount options when remounting could allow mount options to be enabled for a small amount of time, and then the mount option change would be reverted. In the case of "mount -o remount,dax", this can cause a race where files would temporarily treated as DAX --- and then not. Cc: stable@kernel.org Reported-by: syzbot+bca9799bf129256190da@syzkaller.appspotmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- fs/ext4/super.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 0a950b060ace..4fdd17055dc5 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2038,6 +2038,16 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token, #endif } else if (token == Opt_dax) { #ifdef CONFIG_FS_DAX + if (is_remount && test_opt(sb, DAX)) { + ext4_msg(sb, KERN_ERR, "can't mount with " + "both data=journal and dax"); + return -1; + } + if (is_remount && !(sbi->s_mount_opt & EXT4_MOUNT_DAX)) { + ext4_msg(sb, KERN_ERR, "can't change " + "dax mount option while remounting"); + return -1; + } ext4_msg(sb, KERN_WARNING, "DAX enabled. Warning: EXPERIMENTAL, use at your own risk"); sbi->s_mount_opt |= m->mount_opt; @@ -5323,12 +5333,6 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) err = -EINVAL; goto restore_opts; } - if (test_opt(sb, DAX)) { - ext4_msg(sb, KERN_ERR, "can't mount with " - "both data=journal and dax"); - err = -EINVAL; - goto restore_opts; - } } else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA) { if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) { ext4_msg(sb, KERN_ERR, "can't mount with " @@ -5344,12 +5348,6 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) goto restore_opts; } - if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT4_MOUNT_DAX) { - ext4_msg(sb, KERN_WARNING, "warning: refusing change of " - "dax flag with busy inodes while remounting"); - sbi->s_mount_opt ^= EXT4_MOUNT_DAX; - } - if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED) ext4_abort(sb, "Abort forced by user"); -- 2.25.1

From: Ard Biesheuvel <ardb@kernel.org> commit bc310baf2ba381c648983c7f4748327f17324562 upstream. The final build stage of the x86 kernel captures some symbol addresses from the decompressor binary and copies them into zoffset.h. It uses sed with a regular expression that matches the address, symbol type and symbol name, and mangles the captured addresses and the names of symbols of interest into #define directives that are added to zoffset.h The symbol type is indicated by a single letter, which we match strictly: only letters in the set 'ABCDGRSTVW' are matched, even though the actual symbol type is relevant and therefore ignored. Commit bc7c9d620 ("efi/libstub/x86: Force 'hidden' visibility for extern declarations") made a change to the way external symbol references are classified, resulting in 'startup_32' now being emitted as a hidden symbol. This prevents the use of GOT entries to refer to this symbol via its absolute address, which recent toolchains (including Clang based ones) already avoid by default, making this change a no-op in the majority of cases. However, as it turns out, the LLVM linker classifies such hidden symbols as symbols with static linkage in fully linked ELF binaries, causing tools such as NM to output a lowercase 't' rather than an upper case 'T' for the type of such symbols. Since our sed expression only matches upper case letters for the symbol type, the line describing startup_32 is disregarded, resulting in a build error like the following arch/x86/boot/header.S:568:18: error: symbol 'ZO_startup_32' can not be undefined in a subtraction expression init_size: .long (0x00000000008fd000 - ZO_startup_32 + (((0x0000000001f6361c + ((0x0000000001f6361c >> 8) + 65536) - 0x00000000008c32e5) + 4095) & ~4095)) # kernel initialization size Given that we are only interested in the value of the symbol, let's match any character in the set 'a-zA-Z' instead. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/x86/boot/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index e2839b5c246c..6539c50fb9aa 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -87,7 +87,7 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE SETUP_OBJS = $(addprefix $(obj)/,$(setup-y)) -sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|_ehead\|_text\|z_.*\)$$/\#define ZO_\2 0x\1/p' +sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [a-zA-Z] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|_ehead\|_text\|z_.*\)$$/\#define ZO_\2 0x\1/p' quiet_cmd_zoffset = ZOFFSET $@ cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@ -- 2.25.1

From: Boris Brezillon <boris.brezillon@bootlin.com> [ Upstream commit 00ad378f304a091ab2e2df5f944892a6ed558610 ] Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- Documentation/driver-api/mtdnand.rst | 2 +- drivers/mtd/nand/raw/ams-delta.c | 2 +- drivers/mtd/nand/raw/atmel/nand-controller.c | 2 +- drivers/mtd/nand/raw/au1550nd.c | 2 +- .../mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c | 2 +- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 2 +- drivers/mtd/nand/raw/cafe_nand.c | 2 +- drivers/mtd/nand/raw/cmx270_nand.c | 2 +- drivers/mtd/nand/raw/cs553x_nand.c | 2 +- drivers/mtd/nand/raw/davinci_nand.c | 2 +- drivers/mtd/nand/raw/denali.c | 2 +- drivers/mtd/nand/raw/diskonchip.c | 2 +- drivers/mtd/nand/raw/docg4.c | 2 +- drivers/mtd/nand/raw/fsl_elbc_nand.c | 2 +- drivers/mtd/nand/raw/fsl_ifc_nand.c | 2 +- drivers/mtd/nand/raw/fsl_upm.c | 2 +- drivers/mtd/nand/raw/fsmc_nand.c | 2 +- drivers/mtd/nand/raw/gpio.c | 2 +- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +- drivers/mtd/nand/raw/hisi504_nand.c | 2 +- drivers/mtd/nand/raw/jz4740_nand.c | 2 +- drivers/mtd/nand/raw/jz4780_nand.c | 2 +- drivers/mtd/nand/raw/lpc32xx_mlc.c | 2 +- drivers/mtd/nand/raw/lpc32xx_slc.c | 2 +- drivers/mtd/nand/raw/marvell_nand.c | 2 +- drivers/mtd/nand/raw/mpc5121_nfc.c | 2 +- drivers/mtd/nand/raw/mtk_nand.c | 2 +- drivers/mtd/nand/raw/mxc_nand.c | 2 +- drivers/mtd/nand/raw/nand_base.c | 21 +++++++++---------- drivers/mtd/nand/raw/nandsim.c | 2 +- drivers/mtd/nand/raw/ndfc.c | 2 +- drivers/mtd/nand/raw/nuc900_nand.c | 2 +- drivers/mtd/nand/raw/omap2.c | 2 +- drivers/mtd/nand/raw/orion_nand.c | 2 +- drivers/mtd/nand/raw/oxnas_nand.c | 2 +- drivers/mtd/nand/raw/pasemi_nand.c | 2 +- drivers/mtd/nand/raw/plat_nand.c | 2 +- drivers/mtd/nand/raw/qcom_nandc.c | 2 +- drivers/mtd/nand/raw/s3c2410.c | 2 +- drivers/mtd/nand/raw/sh_flctl.c | 2 +- drivers/mtd/nand/raw/sharpsl.c | 2 +- drivers/mtd/nand/raw/sm_common.c | 2 +- drivers/mtd/nand/raw/socrates_nand.c | 2 +- drivers/mtd/nand/raw/sunxi_nand.c | 2 +- drivers/mtd/nand/raw/tango_nand.c | 2 +- drivers/mtd/nand/raw/tegra_nand.c | 2 +- drivers/mtd/nand/raw/tmio_nand.c | 2 +- drivers/mtd/nand/raw/txx9ndfmc.c | 2 +- drivers/mtd/nand/raw/vf610_nfc.c | 2 +- drivers/mtd/nand/raw/xway_nand.c | 2 +- drivers/staging/mt29f_spinand/mt29f_spinand.c | 2 +- include/linux/mtd/rawnand.h | 7 ++++--- 52 files changed, 64 insertions(+), 64 deletions(-) diff --git a/Documentation/driver-api/mtdnand.rst b/Documentation/driver-api/mtdnand.rst index c55a6034c397..1ab6f35b6410 100644 --- a/Documentation/driver-api/mtdnand.rst +++ b/Documentation/driver-api/mtdnand.rst @@ -246,7 +246,7 @@ necessary information about the device. this->eccmode = NAND_ECC_SOFT; /* Scan to find existence of the device */ - if (nand_scan (board_mtd, 1)) { + if (nand_scan (this, 1)) { err = -ENXIO; goto out_ior; } diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c index 37a3cc21c7bc..24ba7296ec08 100644 --- a/drivers/mtd/nand/raw/ams-delta.c +++ b/drivers/mtd/nand/raw/ams-delta.c @@ -235,7 +235,7 @@ static int ams_delta_init(struct platform_device *pdev) goto out_gpio; /* Scan to find existence of the device */ - err = nand_scan(ams_delta_mtd, 1); + err = nand_scan(this, 1); if (err) goto out_mtd; diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index ea022712edee..ee1c401f131f 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -1694,7 +1694,7 @@ atmel_nand_controller_add_nand(struct atmel_nand_controller *nc, nc->caps->ops->nand_init(nc, nand); - ret = nand_scan(mtd, nand->numcs); + ret = nand_scan(chip, nand->numcs); if (ret) { dev_err(nc->dev, "NAND scan failed: %d\n", ret); return ret; diff --git a/drivers/mtd/nand/raw/au1550nd.c b/drivers/mtd/nand/raw/au1550nd.c index 35f5c84cd331..afc1e812e80d 100644 --- a/drivers/mtd/nand/raw/au1550nd.c +++ b/drivers/mtd/nand/raw/au1550nd.c @@ -466,7 +466,7 @@ static int au1550nd_probe(struct platform_device *pdev) this->write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf; this->read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf; - ret = nand_scan(mtd, 1); + ret = nand_scan(this, 1); if (ret) { dev_err(&pdev->dev, "NAND scan failed with %d\n", ret); goto out3; diff --git a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c index 60874de430eb..9b62bc2d25a0 100644 --- a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c +++ b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c @@ -423,7 +423,7 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n) (w4 << 24 | w3 << 18 | w2 << 12 | w1 << 6 | w0)); /* Scan NAND */ - err = nand_scan(nand_to_mtd(&b47n->nand_chip), 1); + err = nand_scan(&b47n->nand_chip, 1); if (err) { pr_err("Could not scan NAND flash: %d\n", err); goto exit; diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index 8002a2a390e5..edf7447a0cd5 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -2304,7 +2304,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn) nand_writereg(ctrl, cfg_offs, nand_readreg(ctrl, cfg_offs) & ~CFG_BUS_WIDTH); - ret = nand_scan(mtd, 1); + ret = nand_scan(chip, 1); if (ret) return ret; diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c index 1dbe43adcfe7..e497b95d624e 100644 --- a/drivers/mtd/nand/raw/cafe_nand.c +++ b/drivers/mtd/nand/raw/cafe_nand.c @@ -783,7 +783,7 @@ static int cafe_nand_probe(struct pci_dev *pdev, /* Scan to find existence of the device */ cafe->nand.dummy_controller.ops = &cafe_nand_controller_ops; - err = nand_scan(mtd, 2); + err = nand_scan(&cafe->nand, 2); if (err) goto out_irq; diff --git a/drivers/mtd/nand/raw/cmx270_nand.c b/drivers/mtd/nand/raw/cmx270_nand.c index b66e254b6802..e92c0f113eb3 100644 --- a/drivers/mtd/nand/raw/cmx270_nand.c +++ b/drivers/mtd/nand/raw/cmx270_nand.c @@ -193,7 +193,7 @@ static int __init cmx270_init(void) this->write_buf = cmx270_write_buf; /* Scan to find existence of the device */ - ret = nand_scan(cmx270_nand_mtd, 1); + ret = nand_scan(this, 1); if (ret) { pr_notice("No NAND device\n"); goto err_scan; diff --git a/drivers/mtd/nand/raw/cs553x_nand.c b/drivers/mtd/nand/raw/cs553x_nand.c index beafad62e7d5..4065bcd12e64 100644 --- a/drivers/mtd/nand/raw/cs553x_nand.c +++ b/drivers/mtd/nand/raw/cs553x_nand.c @@ -241,7 +241,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) } /* Scan to find existence of the device */ - err = nand_scan(new_mtd, 1); + err = nand_scan(this, 1); if (err) goto out_free; diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c index 40145e206a6b..1021624195f7 100644 --- a/drivers/mtd/nand/raw/davinci_nand.c +++ b/drivers/mtd/nand/raw/davinci_nand.c @@ -807,7 +807,7 @@ static int nand_davinci_probe(struct platform_device *pdev) /* Scan to find existence of the device(s) */ info->chip.dummy_controller.ops = &davinci_nand_controller_ops; - ret = nand_scan(mtd, pdata->mask_chipsel ? 2 : 1); + ret = nand_scan(&info->chip, pdata->mask_chipsel ? 2 : 1); if (ret < 0) { dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); return ret; diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index 2242e999a76b..d16581b117ce 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -1384,7 +1384,7 @@ int denali_init(struct denali_nand_info *denali) chip->setup_data_interface = denali_setup_data_interface; chip->dummy_controller.ops = &denali_controller_ops; - ret = nand_scan(mtd, denali->max_banks); + ret = nand_scan(chip, denali->max_banks); if (ret) goto disable_irq; diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c index 3c46188dd6d2..9159748a2ef0 100644 --- a/drivers/mtd/nand/raw/diskonchip.c +++ b/drivers/mtd/nand/raw/diskonchip.c @@ -1620,7 +1620,7 @@ static int __init doc_probe(unsigned long physadr) else numchips = doc2001_init(mtd); - if ((ret = nand_scan(mtd, numchips)) || (ret = doc->late_init(mtd))) { + if ((ret = nand_scan(nand, numchips)) || (ret = doc->late_init(mtd))) { /* DBB note: i believe nand_release is necessary here, as buffers may have been allocated in nand_base. Check with Thomas. FIX ME! */ diff --git a/drivers/mtd/nand/raw/docg4.c b/drivers/mtd/nand/raw/docg4.c index 427fcbc1b71c..69f60755f38a 100644 --- a/drivers/mtd/nand/raw/docg4.c +++ b/drivers/mtd/nand/raw/docg4.c @@ -1391,7 +1391,7 @@ static int __init probe_docg4(struct platform_device *pdev) * ->attach_chip callback. */ nand->dummy_controller.ops = &docg4_controller_ops; - retval = nand_scan(mtd, 0); + retval = nand_scan(nand, 0); if (retval) goto free_nand; diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c index 55f449b711fd..541343d142e0 100644 --- a/drivers/mtd/nand/raw/fsl_elbc_nand.c +++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c @@ -915,7 +915,7 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev) goto err; priv->chip.controller->ops = &fsl_elbc_controller_ops; - ret = nand_scan(mtd, 1); + ret = nand_scan(&priv->chip, 1); if (ret) goto err; diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c index 7e7729df7827..ad010c72df78 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_nand.c +++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c @@ -1079,7 +1079,7 @@ static int fsl_ifc_nand_probe(struct platform_device *dev) goto err; priv->chip.controller->ops = &fsl_ifc_controller_ops; - ret = nand_scan(mtd, 1); + ret = nand_scan(&priv->chip, 1); if (ret) goto err; diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c index a88e2cf66e0f..b45c9940f9c0 100644 --- a/drivers/mtd/nand/raw/fsl_upm.c +++ b/drivers/mtd/nand/raw/fsl_upm.c @@ -191,7 +191,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun, goto err; } - ret = nand_scan(mtd, fun->mchip_count); + ret = nand_scan(&fun->chip, fun->mchip_count); if (ret) goto err; diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index f418236fa020..9991e3b8e237 100644 --- a/drivers/mtd/nand/raw/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c @@ -1125,7 +1125,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) * Scan to find existence of the device */ nand->dummy_controller.ops = &fsmc_nand_controller_ops; - ret = nand_scan(mtd, 1); + ret = nand_scan(nand, 1); if (ret) goto release_dma_write_chan; diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c index 2780af26d9ab..983d3be48019 100644 --- a/drivers/mtd/nand/raw/gpio.c +++ b/drivers/mtd/nand/raw/gpio.c @@ -289,7 +289,7 @@ static int gpio_nand_probe(struct platform_device *pdev) if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp)) gpiod_direction_output(gpiomtd->nwp, 1); - ret = nand_scan(mtd, 1); + ret = nand_scan(chip, 1); if (ret) goto err_wp; diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index 1c1ebbc82824..7af207bc3ab5 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -1934,7 +1934,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this) goto err_out; chip->dummy_controller.ops = &gpmi_nand_controller_ops; - ret = nand_scan(mtd, GPMI_IS_MX6(this) ? 2 : 1); + ret = nand_scan(chip, GPMI_IS_MX6(this) ? 2 : 1); if (ret) goto err_out; diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c index 950dc7789296..76885dbf9c1b 100644 --- a/drivers/mtd/nand/raw/hisi504_nand.c +++ b/drivers/mtd/nand/raw/hisi504_nand.c @@ -811,7 +811,7 @@ static int hisi_nfc_probe(struct platform_device *pdev) } chip->dummy_controller.ops = &hisi_nfc_controller_ops; - ret = nand_scan(mtd, max_chips); + ret = nand_scan(chip, max_chips); if (ret) return ret; diff --git a/drivers/mtd/nand/raw/jz4740_nand.c b/drivers/mtd/nand/raw/jz4740_nand.c index a7515452bc59..75bb26645c82 100644 --- a/drivers/mtd/nand/raw/jz4740_nand.c +++ b/drivers/mtd/nand/raw/jz4740_nand.c @@ -331,7 +331,7 @@ static int jz_nand_detect_bank(struct platform_device *pdev, if (chipnr == 0) { /* Detect first chip. */ - ret = nand_scan(mtd, 1); + ret = nand_scan(chip, 1); if (ret) goto notfound_id; diff --git a/drivers/mtd/nand/raw/jz4780_nand.c b/drivers/mtd/nand/raw/jz4780_nand.c index db4fa60bd52a..2122a7f3c484 100644 --- a/drivers/mtd/nand/raw/jz4780_nand.c +++ b/drivers/mtd/nand/raw/jz4780_nand.c @@ -286,7 +286,7 @@ static int jz4780_nand_init_chip(struct platform_device *pdev, nand_set_flash_node(chip, np); chip->controller->ops = &jz4780_nand_controller_ops; - ret = nand_scan(mtd, 1); + ret = nand_scan(chip, 1); if (ret) return ret; diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c index e82abada130a..453a83b82d73 100644 --- a/drivers/mtd/nand/raw/lpc32xx_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c @@ -802,7 +802,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) * SMALL block or LARGE block. */ nand_chip->dummy_controller.ops = &lpc32xx_nand_controller_ops; - res = nand_scan(mtd, 1); + res = nand_scan(nand_chip, 1); if (res) goto free_irq; diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c index a4e8b7e75135..ad6eff0591d2 100644 --- a/drivers/mtd/nand/raw/lpc32xx_slc.c +++ b/drivers/mtd/nand/raw/lpc32xx_slc.c @@ -925,7 +925,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev) /* Find NAND device */ chip->dummy_controller.ops = &lpc32xx_nand_controller_ops; - res = nand_scan(mtd, 1); + res = nand_scan(chip, 1); if (res) goto release_dma; diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index 7a84a8f05b46..e0e21a7fc8e7 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -2551,7 +2551,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc, chip->options |= NAND_BUSWIDTH_AUTO; - ret = nand_scan(mtd, marvell_nand->nsels); + ret = nand_scan(chip, marvell_nand->nsels); if (ret) { dev_err(dev, "could not scan the nand chip\n"); return ret; diff --git a/drivers/mtd/nand/raw/mpc5121_nfc.c b/drivers/mtd/nand/raw/mpc5121_nfc.c index 6d1740d54e0d..bc99064c8ca9 100644 --- a/drivers/mtd/nand/raw/mpc5121_nfc.c +++ b/drivers/mtd/nand/raw/mpc5121_nfc.c @@ -778,7 +778,7 @@ static int mpc5121_nfc_probe(struct platform_device *op) } /* Detect NAND chips */ - retval = nand_scan(mtd, be32_to_cpup(chips_no)); + retval = nand_scan(chip, be32_to_cpup(chips_no)); if (retval) { dev_err(dev, "NAND Flash not found !\n"); goto error; diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c index ab5a8778c4b2..6cc2845a5ff2 100644 --- a/drivers/mtd/nand/raw/mtk_nand.c +++ b/drivers/mtd/nand/raw/mtk_nand.c @@ -1382,7 +1382,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc, mtk_nfc_hw_init(nfc); - ret = nand_scan(mtd, nsels); + ret = nand_scan(nand, nsels); if (ret) return ret; diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c index 4c9214dea424..72bdd2767a4c 100644 --- a/drivers/mtd/nand/raw/mxc_nand.c +++ b/drivers/mtd/nand/raw/mxc_nand.c @@ -1900,7 +1900,7 @@ static int mxcnd_probe(struct platform_device *pdev) /* Scan the NAND device */ this->dummy_controller.ops = &mxcnd_controller_ops; - err = nand_scan(mtd, is_imx25_nfc(host) ? 4 : 1); + err = nand_scan(this, is_imx25_nfc(host) ? 4 : 1); if (err) goto escan; diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index d527e448ce19..2800520dd44d 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -5953,7 +5953,7 @@ static int nand_dt_init(struct nand_chip *chip) /** * nand_scan_ident - Scan for the NAND device - * @mtd: MTD device structure + * @chip: NAND chip object * @maxchips: number of chips to scan for * @table: alternative NAND ID table * @@ -5965,11 +5965,11 @@ static int nand_dt_init(struct nand_chip *chip) * prevented dynamic allocations during this phase which was unconvenient and * as been banned for the benefit of the ->init_ecc()/cleanup_ecc() hooks. */ -static int nand_scan_ident(struct mtd_info *mtd, int maxchips, +static int nand_scan_ident(struct nand_chip *chip, int maxchips, struct nand_flash_dev *table) { + struct mtd_info *mtd = nand_to_mtd(chip); int i, nand_maf_id, nand_dev_id; - struct nand_chip *chip = mtd_to_nand(mtd); int ret; /* Enforce the right timings for reset/detection */ @@ -6423,15 +6423,15 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd) /** * nand_scan_tail - Scan for the NAND device - * @mtd: MTD device structure + * @chip: NAND chip object * * This is the second phase of the normal nand_scan() function. It fills out * all the uninitialized function pointers with the defaults and scans for a * bad block table if appropriate. */ -static int nand_scan_tail(struct mtd_info *mtd) +static int nand_scan_tail(struct nand_chip *chip) { - struct nand_chip *chip = mtd_to_nand(mtd); + struct mtd_info *mtd = nand_to_mtd(chip); struct nand_ecc_ctrl *ecc = &chip->ecc; int ret, i; @@ -6770,7 +6770,7 @@ static void nand_detach(struct nand_chip *chip) /** * nand_scan_with_ids - [NAND Interface] Scan for the NAND device - * @mtd: MTD device structure + * @chip: NAND chip object * @maxchips: number of chips to scan for. @nand_scan_ident() will not be run if * this parameter is zero (useful for specific drivers that must * handle this part of the process themselves, e.g docg4). @@ -6780,14 +6780,13 @@ static void nand_detach(struct nand_chip *chip) * The flash ID is read and the mtd/chip structures are filled with the * appropriate values. */ -int nand_scan_with_ids(struct mtd_info *mtd, int maxchips, +int nand_scan_with_ids(struct nand_chip *chip, int maxchips, struct nand_flash_dev *ids) { - struct nand_chip *chip = mtd_to_nand(mtd); int ret; if (maxchips) { - ret = nand_scan_ident(mtd, maxchips, ids); + ret = nand_scan_ident(chip, maxchips, ids); if (ret) return ret; } @@ -6796,7 +6795,7 @@ int nand_scan_with_ids(struct mtd_info *mtd, int maxchips, if (ret) goto cleanup_ident; - ret = nand_scan_tail(mtd); + ret = nand_scan_tail(chip); if (ret) goto detach_chip; diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c index 71ac034aee9c..7a461ea8abf9 100644 --- a/drivers/mtd/nand/raw/nandsim.c +++ b/drivers/mtd/nand/raw/nandsim.c @@ -2319,7 +2319,7 @@ static int __init ns_init_module(void) goto error; chip->dummy_controller.ops = &ns_controller_ops; - retval = nand_scan(nsmtd, 1); + retval = nand_scan(chip, 1); if (retval) { NS_ERR("Could not scan NAND Simulator device\n"); goto error; diff --git a/drivers/mtd/nand/raw/ndfc.c b/drivers/mtd/nand/raw/ndfc.c index 540fa1a0ea24..cfe31c78482a 100644 --- a/drivers/mtd/nand/raw/ndfc.c +++ b/drivers/mtd/nand/raw/ndfc.c @@ -181,7 +181,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc, goto err; } - ret = nand_scan(mtd, 1); + ret = nand_scan(chip, 1); if (ret) goto err; diff --git a/drivers/mtd/nand/raw/nuc900_nand.c b/drivers/mtd/nand/raw/nuc900_nand.c index af5b32c9a791..41ed993b9523 100644 --- a/drivers/mtd/nand/raw/nuc900_nand.c +++ b/drivers/mtd/nand/raw/nuc900_nand.c @@ -270,7 +270,7 @@ static int nuc900_nand_probe(struct platform_device *pdev) nuc900_nand_enable(nuc900_nand); - if (nand_scan(mtd, 1)) + if (nand_scan(chip, 1)) return -ENXIO; mtd_device_register(mtd, partitions, ARRAY_SIZE(partitions)); diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c index b1683d7a7e04..49fc60a790ea 100644 --- a/drivers/mtd/nand/raw/omap2.c +++ b/drivers/mtd/nand/raw/omap2.c @@ -2254,7 +2254,7 @@ static int omap_nand_probe(struct platform_device *pdev) /* scan NAND device connected to chip controller */ nand_chip->options |= info->devsize & NAND_BUSWIDTH_16; - err = nand_scan(mtd, 1); + err = nand_scan(nand_chip, 1); if (err) goto return_error; diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c index 52d435285a3f..256a6b018bdc 100644 --- a/drivers/mtd/nand/raw/orion_nand.c +++ b/drivers/mtd/nand/raw/orion_nand.c @@ -174,7 +174,7 @@ static int __init orion_nand_probe(struct platform_device *pdev) return ret; } - ret = nand_scan(mtd, 1); + ret = nand_scan(nc, 1); if (ret) goto no_dev; diff --git a/drivers/mtd/nand/raw/oxnas_nand.c b/drivers/mtd/nand/raw/oxnas_nand.c index 01b00bb69c1e..9aeb024c2a0e 100644 --- a/drivers/mtd/nand/raw/oxnas_nand.c +++ b/drivers/mtd/nand/raw/oxnas_nand.c @@ -142,7 +142,7 @@ static int oxnas_nand_probe(struct platform_device *pdev) chip->chip_delay = 30; /* Scan to find existence of the device */ - err = nand_scan(mtd, 1); + err = nand_scan(chip, 1); if (err) goto err_clk_unprepare; diff --git a/drivers/mtd/nand/raw/pasemi_nand.c b/drivers/mtd/nand/raw/pasemi_nand.c index d69e5bae541e..8979ff248a31 100644 --- a/drivers/mtd/nand/raw/pasemi_nand.c +++ b/drivers/mtd/nand/raw/pasemi_nand.c @@ -156,7 +156,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev) chip->bbt_options = NAND_BBT_USE_FLASH; /* Scan to find existence of the device */ - err = nand_scan(pasemi_nand_mtd, 1); + err = nand_scan(chip, 1); if (err) goto out_lpc; diff --git a/drivers/mtd/nand/raw/plat_nand.c b/drivers/mtd/nand/raw/plat_nand.c index 222626df4b96..deefe2136282 100644 --- a/drivers/mtd/nand/raw/plat_nand.c +++ b/drivers/mtd/nand/raw/plat_nand.c @@ -84,7 +84,7 @@ static int plat_nand_probe(struct platform_device *pdev) } /* Scan to find existence of the device */ - err = nand_scan(mtd, pdata->chip.nr_chips); + err = nand_scan(&data->chip, pdata->chip.nr_chips); if (err) goto out; diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index 07d8750313fd..87dc21df1c98 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -2834,7 +2834,7 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, /* set up initial status value */ host->status = NAND_STATUS_READY | NAND_STATUS_WP; - ret = nand_scan(mtd, 1); + ret = nand_scan(chip, 1); if (ret) return ret; diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c index c21e8892394a..7f30d801d642 100644 --- a/drivers/mtd/nand/raw/s3c2410.c +++ b/drivers/mtd/nand/raw/s3c2410.c @@ -1170,7 +1170,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) mtd->dev.parent = &pdev->dev; s3c2410_nand_init_chip(info, nmtd, sets); - err = nand_scan(mtd, sets ? sets->nr_chips : 1); + err = nand_scan(&nmtd->chip, sets ? sets->nr_chips : 1); if (err) goto exit_error; diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c index 1e7273263c4b..1675ff254b7a 100644 --- a/drivers/mtd/nand/raw/sh_flctl.c +++ b/drivers/mtd/nand/raw/sh_flctl.c @@ -1203,7 +1203,7 @@ static int flctl_probe(struct platform_device *pdev) flctl_setup_dma(flctl); nand->dummy_controller.ops = &flctl_nand_controller_ops; - ret = nand_scan(flctl_mtd, 1); + ret = nand_scan(nand, 1); if (ret) goto err_chip; diff --git a/drivers/mtd/nand/raw/sharpsl.c b/drivers/mtd/nand/raw/sharpsl.c index fc171b17a39b..4afacb0dcf00 100644 --- a/drivers/mtd/nand/raw/sharpsl.c +++ b/drivers/mtd/nand/raw/sharpsl.c @@ -171,7 +171,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev) this->ecc.correct = nand_correct_data; /* Scan to find existence of the device */ - err = nand_scan(mtd, 1); + err = nand_scan(this, 1); if (err) goto err_scan; diff --git a/drivers/mtd/nand/raw/sm_common.c b/drivers/mtd/nand/raw/sm_common.c index 73aafe8c3ef3..02ac6e9b2d16 100644 --- a/drivers/mtd/nand/raw/sm_common.c +++ b/drivers/mtd/nand/raw/sm_common.c @@ -195,7 +195,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia) /* Scan for card properties */ chip->dummy_controller.ops = &sm_controller_ops; flash_ids = smartmedia ? nand_smartmedia_flash_ids : nand_xd_flash_ids; - ret = nand_scan_with_ids(mtd, 1, flash_ids); + ret = nand_scan_with_ids(chip, 1, flash_ids); if (ret) return ret; diff --git a/drivers/mtd/nand/raw/socrates_nand.c b/drivers/mtd/nand/raw/socrates_nand.c index 9824a9923583..976b6f30d67f 100644 --- a/drivers/mtd/nand/raw/socrates_nand.c +++ b/drivers/mtd/nand/raw/socrates_nand.c @@ -185,7 +185,7 @@ static int socrates_nand_probe(struct platform_device *ofdev) dev_set_drvdata(&ofdev->dev, host); - res = nand_scan(mtd, 1); + res = nand_scan(nand_chip, 1); if (res) goto out; diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c index 5b5f4d25a3e1..bd9084f1964b 100644 --- a/drivers/mtd/nand/raw/sunxi_nand.c +++ b/drivers/mtd/nand/raw/sunxi_nand.c @@ -1940,7 +1940,7 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc, mtd = nand_to_mtd(nand); mtd->dev.parent = dev; - ret = nand_scan(mtd, nsels); + ret = nand_scan(nand, nsels); if (ret) return ret; diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c index 72698691727d..45beb87aec93 100644 --- a/drivers/mtd/nand/raw/tango_nand.c +++ b/drivers/mtd/nand/raw/tango_nand.c @@ -588,7 +588,7 @@ static int chip_init(struct device *dev, struct device_node *np) mtd_set_ooblayout(mtd, &tango_nand_ooblayout_ops); mtd->dev.parent = dev; - err = nand_scan(mtd, 1); + err = nand_scan(chip, 1); if (err) return err; diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c index 79da1efc88d1..5dcee20e2a8c 100644 --- a/drivers/mtd/nand/raw/tegra_nand.c +++ b/drivers/mtd/nand/raw/tegra_nand.c @@ -1119,7 +1119,7 @@ static int tegra_nand_chips_init(struct device *dev, chip->select_chip = tegra_nand_select_chip; chip->setup_data_interface = tegra_nand_setup_data_interface; - ret = nand_scan(mtd, 1); + ret = nand_scan(chip, 1); if (ret) return ret; diff --git a/drivers/mtd/nand/raw/tmio_nand.c b/drivers/mtd/nand/raw/tmio_nand.c index dcaa924502de..6df499a239ae 100644 --- a/drivers/mtd/nand/raw/tmio_nand.c +++ b/drivers/mtd/nand/raw/tmio_nand.c @@ -436,7 +436,7 @@ static int tmio_probe(struct platform_device *dev) nand_chip->waitfunc = tmio_nand_wait; /* Scan to find existence of the device */ - retval = nand_scan(mtd, 1); + retval = nand_scan(nand_chip, 1); if (retval) goto err_irq; diff --git a/drivers/mtd/nand/raw/txx9ndfmc.c b/drivers/mtd/nand/raw/txx9ndfmc.c index 4d61a14fcb65..169e8bcee61e 100644 --- a/drivers/mtd/nand/raw/txx9ndfmc.c +++ b/drivers/mtd/nand/raw/txx9ndfmc.c @@ -359,7 +359,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) if (plat->wide_mask & (1 << i)) chip->options |= NAND_BUSWIDTH_16; - if (nand_scan(mtd, 1)) { + if (nand_scan(chip, 1)) { kfree(txx9_priv->mtdname); kfree(txx9_priv); continue; diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c index 6f6dcbf9095b..3b486f4ce868 100644 --- a/drivers/mtd/nand/raw/vf610_nfc.c +++ b/drivers/mtd/nand/raw/vf610_nfc.c @@ -892,7 +892,7 @@ static int vf610_nfc_probe(struct platform_device *pdev) /* Scan the NAND chip */ chip->dummy_controller.ops = &vf610_nfc_controller_ops; - err = nand_scan(mtd, 1); + err = nand_scan(chip, 1); if (err) goto err_disable_clk; diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c index 9926b4e3d69d..e670d3b5a646 100644 --- a/drivers/mtd/nand/raw/xway_nand.c +++ b/drivers/mtd/nand/raw/xway_nand.c @@ -205,7 +205,7 @@ static int xway_nand_probe(struct platform_device *pdev) | cs_flag, EBU_NAND_CON); /* Scan to find existence of the device */ - err = nand_scan(mtd, 1); + err = nand_scan(&data->chip, 1); if (err) return err; diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c index 448478451c4c..b50788b2d1d9 100644 --- a/drivers/staging/mt29f_spinand/mt29f_spinand.c +++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c @@ -934,7 +934,7 @@ static int spinand_probe(struct spi_device *spi_nand) mtd_set_ooblayout(mtd, &spinand_oob_64_ops); #endif - if (nand_scan(mtd, 1)) + if (nand_scan(chip, 1)) return -ENXIO; return mtd_device_register(mtd, NULL, 0); diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index efb2345359bb..890cd7488aca 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -24,15 +24,16 @@ #include <linux/of.h> #include <linux/types.h> +struct nand_chip; struct nand_flash_dev; /* Scan and identify a NAND device */ -int nand_scan_with_ids(struct mtd_info *mtd, int max_chips, +int nand_scan_with_ids(struct nand_chip *chip, int max_chips, struct nand_flash_dev *ids); -static inline int nand_scan(struct mtd_info *mtd, int max_chips) +static inline int nand_scan(struct nand_chip *chip, int max_chips) { - return nand_scan_with_ids(mtd, max_chips, NULL); + return nand_scan_with_ids(chip, max_chips, NULL); } /* Internal helper for board drivers which need to override command function */ -- 2.25.1

From: Miquel Raynal <miquel.raynal@bootlin.com> [ Upstream commit c5be12e45940f1aa1b5dfa04db5d15ad24f7c896 ] Not sure nand_cleanup() is the right function to call here but in any case it is not nand_release(). Indeed, even a comment says that calling nand_release() is a bit of a hack as there is no MTD device to unregister. So switch to nand_cleanup() for now and drop this comment. There is no Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if it did not intruce any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-13-miquel.raynal@bootl... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/mtd/nand/raw/diskonchip.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c index 43d1e08133ce..ac3792b6fb33 100644 --- a/drivers/mtd/nand/raw/diskonchip.c +++ b/drivers/mtd/nand/raw/diskonchip.c @@ -1621,13 +1621,10 @@ static int __init doc_probe(unsigned long physadr) numchips = doc2001_init(mtd); if ((ret = nand_scan(nand, numchips)) || (ret = doc->late_init(mtd))) { - /* DBB note: i believe nand_release is necessary here, as + /* DBB note: i believe nand_cleanup is necessary here, as buffers may have been allocated in nand_base. Check with Thomas. FIX ME! */ - /* nand_release will call mtd_device_unregister, but we - haven't yet added it. This is handled without incident by - mtd_device_unregister, as far as I can tell. */ - nand_release(nand); + nand_cleanup(nand); goto fail; } -- 2.25.1

From: Miquel Raynal <miquel.raynal@bootlin.com> [ Upstream commit 34531be5e804a8e1abf314a6c3a19fe342e4a154 ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-61-miquel.raynal@bootl... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/mtd/nand/raw/xway_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c index 1adb41acebfc..bfa43fdc3c54 100644 --- a/drivers/mtd/nand/raw/xway_nand.c +++ b/drivers/mtd/nand/raw/xway_nand.c @@ -211,7 +211,7 @@ static int xway_nand_probe(struct platform_device *pdev) err = mtd_device_register(mtd, NULL, 0); if (err) - nand_release(&data->chip); + nand_cleanup(&data->chip); return err; } -- 2.25.1

From: Nishka Dasgupta <nishkadg.linux@gmail.com> [ Upstream commit c436f68beeb20f2f92937677db1d9069b0dd2a3d ] Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put under a new goto to put the node at a loop exit. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/mtd/nand/raw/oxnas_nand.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/raw/oxnas_nand.c b/drivers/mtd/nand/raw/oxnas_nand.c index 5bc180536320..7509bcd96135 100644 --- a/drivers/mtd/nand/raw/oxnas_nand.c +++ b/drivers/mtd/nand/raw/oxnas_nand.c @@ -123,7 +123,7 @@ static int oxnas_nand_probe(struct platform_device *pdev) GFP_KERNEL); if (!chip) { err = -ENOMEM; - goto err_clk_unprepare; + goto err_release_child; } chip->controller = &oxnas->base; @@ -144,12 +144,12 @@ static int oxnas_nand_probe(struct platform_device *pdev) /* Scan to find existence of the device */ err = nand_scan(chip, 1); if (err) - goto err_clk_unprepare; + goto err_release_child; err = mtd_device_register(mtd, NULL, 0); if (err) { nand_release(chip); - goto err_clk_unprepare; + goto err_release_child; } oxnas->chips[nchips] = chip; @@ -166,6 +166,8 @@ static int oxnas_nand_probe(struct platform_device *pdev) return 0; +err_release_child: + of_node_put(nand_np); err_clk_unprepare: clk_disable_unprepare(oxnas->clk); return err; -- 2.25.1

From: Miquel Raynal <miquel.raynal@bootlin.com> [ Upstream commit 9c6c2e5cc77119ce0dacb4f9feedb73ce0354421 ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-51-miquel.raynal@bootl... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/mtd/nand/raw/socrates_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/socrates_nand.c b/drivers/mtd/nand/raw/socrates_nand.c index 74fdb8402dbd..274b3521a1dc 100644 --- a/drivers/mtd/nand/raw/socrates_nand.c +++ b/drivers/mtd/nand/raw/socrates_nand.c @@ -193,7 +193,7 @@ static int socrates_nand_probe(struct platform_device *ofdev) if (!res) return res; - nand_release(nand_chip); + nand_cleanup(nand_chip); out: iounmap(host->io_base); -- 2.25.1

From: Miquel Raynal <miquel.raynal@bootlin.com> [ Upstream commit 8a82bbcadec877f5f938c54026278dfc1f05a332 ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-28-miquel.raynal@bootl... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/mtd/nand/raw/mtk_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c index 9c2ae8e87347..bb40022e109f 100644 --- a/drivers/mtd/nand/raw/mtk_nand.c +++ b/drivers/mtd/nand/raw/mtk_nand.c @@ -1389,7 +1389,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc, ret = mtd_device_register(mtd, NULL, 0); if (ret) { dev_err(dev, "mtd parse partition error\n"); - nand_release(nand); + nand_cleanup(nand); return ret; } -- 2.25.1

From: "Dmitry V. Levin" <ldv@altlinux.org> commit b3583fca5fb654af2cfc1c08259abb9728272538 upstream. If both the tracer and the tracee are compat processes, and gprs[2] is assigned a value by __poke_user_compat, then the higher 32 bits of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and syscall_get_error() always returns 0. Fix the implementation by sign-extending the value for compat processes the same way as x86 implementation does. The bug was exposed to user space by commit 201766a20e30f ("ptrace: add PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite. This change fixes strace syscall tampering on s390. Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org Fixes: 753c4dd6a2fa2 ("[S390] ptrace changes") Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: stable@vger.kernel.org # v2.6.28+ Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/s390/include/asm/syscall.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h index 96f9a9151fde..2becba8008c4 100644 --- a/arch/s390/include/asm/syscall.h +++ b/arch/s390/include/asm/syscall.h @@ -38,7 +38,17 @@ static inline void syscall_rollback(struct task_struct *task, static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { - return IS_ERR_VALUE(regs->gprs[2]) ? regs->gprs[2] : 0; + unsigned long error = regs->gprs[2]; +#ifdef CONFIG_COMPAT + if (test_tsk_thread_flag(task, TIF_31BIT)) { + /* + * Sign-extend the value so (int)-EFOO becomes (long)-EFOO + * and will match correctly in comparisons. + */ + error = (long)(int)error; + } +#endif + return IS_ERR_VALUE(error) ? error : 0; } static inline long syscall_get_return_value(struct task_struct *task, -- 2.25.1

From: Imre Deak <imre.deak@intel.com> commit a3005c2edf7e8c3478880db1ca84028a2b6819bb upstream. Atm, hotplug interrupts on TypeC ports are left enabled after detecting an interrupt storm, fix this. Reported-by: Kunal Joshi <kunal1.joshi@intel.com> References: https://gitlab.freedesktop.org/drm/intel/-/issues/351 Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/1964 Cc: Kunal Joshi <kunal1.joshi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200612121731.19596-1-imre.de... (cherry picked from commit 587a87b9d7e94927edcdea018565bc1939381eb1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/gpu/drm/i915/i915_irq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 29877969310d..b7c398232136 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -3821,6 +3821,7 @@ static void gen11_hpd_irq_setup(struct drm_i915_private *dev_priv) val = I915_READ(GEN11_DE_HPD_IMR); val &= ~hotplug_irqs; + val |= ~enabled_irqs & hotplug_irqs; I915_WRITE(GEN11_DE_HPD_IMR, val); POSTING_READ(GEN11_DE_HPD_IMR); -- 2.25.1

From: Eric Biggers <ebiggers@google.com> commit 77251e41f89a813b4090f5199442f217bbf11297 upstream. When a crypto template needs to be instantiated, CRYPTO_MSG_ALG_REQUEST is sent to crypto_chain. cryptomgr_schedule_probe() handles this by starting a thread to instantiate the template, then waiting for this thread to complete via crypto_larval::completion. This can deadlock because instantiating the template may require loading modules, and this (apparently depending on userspace) may need to wait for the crc-t10dif module (lib/crc-t10dif.c) to be loaded. But crc-t10dif's module_init function uses crypto_register_notifier() and therefore takes crypto_chain.rwsem for write. That can't proceed until the notifier callback has finished, as it holds this semaphore for read. Fix this by removing the wait on crypto_larval::completion from within cryptomgr_schedule_probe(). It's actually unnecessary because crypto_alg_mod_lookup() calls crypto_larval_wait() itself after sending CRYPTO_MSG_ALG_REQUEST. This only actually became a problem in v4.20 due to commit b76377543b73 ("crc-t10dif: Pick better transform if one becomes available"), but the unnecessary wait was much older. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207159 Reported-by: Mike Gerow <gerow@google.com> Fixes: 398710379f51 ("crypto: algapi - Move larval completion into algboss") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: Kai Lüke <kai@kinvolk.io> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- crypto/algboss.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/crypto/algboss.c b/crypto/algboss.c index 5e6df2a087fa..445da4a0618f 100644 --- a/crypto/algboss.c +++ b/crypto/algboss.c @@ -193,8 +193,6 @@ static int cryptomgr_schedule_probe(struct crypto_larval *larval) if (IS_ERR(thread)) goto err_put_larval; - wait_for_completion_interruptible(&larval->completion); - return NOTIFY_STOP; err_put_larval: -- 2.25.1

From: Chen Yu <yu.c.chen@intel.com> commit 6bf6be1127f7e6d4bf39f84d56854e944d045d74 upstream. Currently the system will be woken up via WOL(Wake On LAN) even if the device wakeup ability has been disabled via sysfs: cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup disabled The system should not be woken up if the user has explicitly disabled the wake up ability for this device. This patch clears the WOL ability of this network device if the user has disabled the wake up ability in sysfs. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver") Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/net/ethernet/intel/e1000e/netdev.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 2a06e489f48c..7583f893ef6e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6308,11 +6308,17 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 ctrl, ctrl_ext, rctl, status; - /* Runtime suspend should only enable wakeup for link changes */ - u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; + u32 ctrl, ctrl_ext, rctl, status, wufc; int retval = 0; + /* Runtime suspend should only enable wakeup for link changes */ + if (runtime) + wufc = E1000_WUFC_LNKC; + else if (device_may_wakeup(&pdev->dev)) + wufc = adapter->wol; + else + wufc = 0; + status = er32(STATUS); if (status & E1000_STATUS_LU) wufc &= ~E1000_WUFC_LNKC; @@ -6369,7 +6375,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) if (adapter->hw.phy.type == e1000_phy_igp_3) { e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); } else if (hw->mac.type >= e1000_pch_lpt) { - if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC))) + if (wufc && !(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC))) /* ULP does not support wake from unicast, multicast * or broadcast. */ -- 2.25.1

From: Jiri Olsa <jolsa@redhat.com> [ Upstream commit 9b38cc704e844e41d9cf74e647bff1d249512cb3 ] Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave. My test was also able to trigger lockdep output: ============================================ WARNING: possible recursive locking detected 5.6.0-rc6+ #6 Not tainted -------------------------------------------- sched-messaging/2767 is trying to acquire lock: ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0 but task is already holding lock: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(kretprobe_table_locks[i].lock)); lock(&(kretprobe_table_locks[i].lock)); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by sched-messaging/2767: #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 stack backtrace: CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6 Call Trace: dump_stack+0x96/0xe0 __lock_acquire.cold.57+0x173/0x2b7 ? native_queued_spin_lock_slowpath+0x42b/0x9e0 ? lockdep_hardirqs_on+0x590/0x590 ? __lock_acquire+0xf63/0x4030 lock_acquire+0x15a/0x3d0 ? kretprobe_hash_lock+0x52/0xa0 _raw_spin_lock_irqsave+0x36/0x70 ? kretprobe_hash_lock+0x52/0xa0 kretprobe_hash_lock+0x52/0xa0 trampoline_handler+0xf8/0x940 ? kprobe_fault_handler+0x380/0x380 ? find_held_lock+0x3a/0x1c0 kretprobe_trampoline+0x25/0x50 ? lock_acquired+0x392/0xbc0 ? _raw_spin_lock_irqsave+0x50/0x70 ? __get_valid_kprobe+0x1f0/0x1f0 ? _raw_spin_unlock_irqrestore+0x3b/0x40 ? finish_task_switch+0x4b9/0x6d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 The code within the kretprobe handler checks for probe reentrancy, so we won't trigger any _raw_spin_lock_irqsave probe in there. The problem is in outside kprobe_flush_task, where we call: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave where _raw_spin_lock_irqsave triggers the kretprobe and installs kretprobe_trampoline handler on _raw_spin_lock_irqsave return. The kretprobe_trampoline handler is then executed with already locked kretprobe_table_locks, and first thing it does is to lock kretprobe_table_locks ;-) the whole lockup path like: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed ---> kretprobe_table_locks locked kretprobe_trampoline trampoline_handler kretprobe_hash_lock(current, &head, &flags); <--- deadlock Adding kprobe_busy_begin/end helpers that mark code with fake probe installed to prevent triggering of another kprobe within this code. Using these helpers in kprobe_flush_task, so the probe recursion protection check is hit and the probe is never set to prevent above lockup. Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnot... Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by: "Ziqian SUN (Zamir)" <zsun@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/x86/kernel/kprobes/core.c | 16 +++------------- include/linux/kprobes.h | 4 ++++ kernel/kprobes.c | 24 ++++++++++++++++++++++++ 3 files changed, 31 insertions(+), 13 deletions(-) diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c index e86fc3f4c725..2bb9a4c862b1 100644 --- a/arch/x86/kernel/kprobes/core.c +++ b/arch/x86/kernel/kprobes/core.c @@ -765,16 +765,11 @@ asm( NOKPROBE_SYMBOL(kretprobe_trampoline); STACK_FRAME_NON_STANDARD(kretprobe_trampoline); -static struct kprobe kretprobe_kprobe = { - .addr = (void *)kretprobe_trampoline, -}; - /* * Called from kretprobe_trampoline */ static __used void *trampoline_handler(struct pt_regs *regs) { - struct kprobe_ctlblk *kcb; struct kretprobe_instance *ri = NULL; struct hlist_head *head, empty_rp; struct hlist_node *tmp; @@ -784,16 +779,12 @@ static __used void *trampoline_handler(struct pt_regs *regs) void *frame_pointer; bool skipped = false; - preempt_disable(); - /* * Set a dummy kprobe for avoiding kretprobe recursion. * Since kretprobe never run in kprobe handler, kprobe must not * be running at this point. */ - kcb = get_kprobe_ctlblk(); - __this_cpu_write(current_kprobe, &kretprobe_kprobe); - kcb->kprobe_status = KPROBE_HIT_ACTIVE; + kprobe_busy_begin(); INIT_HLIST_HEAD(&empty_rp); kretprobe_hash_lock(current, &head, &flags); @@ -872,7 +863,7 @@ static __used void *trampoline_handler(struct pt_regs *regs) __this_cpu_write(current_kprobe, &ri->rp->kp); ri->ret_addr = correct_ret_addr; ri->rp->handler(ri, regs); - __this_cpu_write(current_kprobe, &kretprobe_kprobe); + __this_cpu_write(current_kprobe, &kprobe_busy); } recycle_rp_inst(ri, &empty_rp); @@ -888,8 +879,7 @@ static __used void *trampoline_handler(struct pt_regs *regs) kretprobe_hash_unlock(current, &flags); - __this_cpu_write(current_kprobe, NULL); - preempt_enable(); + kprobe_busy_end(); hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) { hlist_del(&ri->hlist); diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index 9adb92ad24d3..9f22652d69bb 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -363,6 +363,10 @@ static inline struct kprobe_ctlblk *get_kprobe_ctlblk(void) return this_cpu_ptr(&kprobe_ctlblk); } +extern struct kprobe kprobe_busy; +void kprobe_busy_begin(void); +void kprobe_busy_end(void); + kprobe_opcode_t *kprobe_lookup_name(const char *name, unsigned int offset); int register_kprobe(struct kprobe *p); void unregister_kprobe(struct kprobe *p); diff --git a/kernel/kprobes.c b/kernel/kprobes.c index f1d1e04f6f08..755269366a21 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1227,6 +1227,26 @@ __releases(hlist_lock) } NOKPROBE_SYMBOL(kretprobe_table_unlock); +struct kprobe kprobe_busy = { + .addr = (void *) get_kprobe, +}; + +void kprobe_busy_begin(void) +{ + struct kprobe_ctlblk *kcb; + + preempt_disable(); + __this_cpu_write(current_kprobe, &kprobe_busy); + kcb = get_kprobe_ctlblk(); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; +} + +void kprobe_busy_end(void) +{ + __this_cpu_write(current_kprobe, NULL); + preempt_enable(); +} + /* * This function is called from finish_task_switch when task tk becomes dead, * so that we can recycle any function-return probe instances associated @@ -1244,6 +1264,8 @@ void kprobe_flush_task(struct task_struct *tk) /* Early boot. kretprobe_table_locks not yet initialized. */ return; + kprobe_busy_begin(); + INIT_HLIST_HEAD(&empty_rp); hash = hash_ptr(tk, KPROBE_HASH_BITS); head = &kretprobe_inst_table[hash]; @@ -1257,6 +1279,8 @@ void kprobe_flush_task(struct task_struct *tk) hlist_del(&ri->hlist); kfree(ri); } + + kprobe_busy_end(); } NOKPROBE_SYMBOL(kprobe_flush_task); -- 2.25.1

From: "Ahmed S. Darwish" <a.darwish@linutronix.de> [ Upstream commit 11d6011c2cf29f7c8181ebde6c8bc0c4d83adcd7 ] Sequence counters write paths are critical sections that must never be preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed. Commit 5dbe7c178d3f ("net: fix kernel deadlock with interface rename and netdev name retrieval.") handled a deadlock, observed with CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was infinitely spinning: it got scheduled after the seqcount write side blocked inside its own critical section. To fix that deadlock, among other issues, the commit added a cond_resched() inside the read side section. While this will get the non-preemptible kernel eventually unstuck, the seqcount reader is fully exhausting its slice just spinning -- until TIF_NEED_RESCHED is set. The fix is also still broken: if the seqcount reader belongs to a real-time scheduling policy, it can spin forever and the kernel will livelock. Disabling preemption over the seqcount write side critical section will not work: inside it are a number of GFP_KERNEL allocations and mutex locking through the drivers/base/ :: device_rename() call chain.

From all the above, replace the seqcount with a rwsem.

Fixes: 5dbe7c178d3f (net: fix kernel deadlock with interface rename and netdev name retrieval.) Fixes: 30e6c9fa93cf (net: devnet_rename_seq should be a seqcount) Fixes: c91f6df2db49 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name) Cc: <stable@vger.kernel.org> Reported-by: kbuild test robot <lkp@intel.com> [ v1 missing up_read() on error exit ] Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [ v1 missing up_read() on error exit ] Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- net/core/dev.c | 40 ++++++++++++++++++---------------------- 1 file changed, 18 insertions(+), 22 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 8db77e09387b..1618d5a676c4 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -83,6 +83,7 @@ #include <linux/sched.h> #include <linux/sched/mm.h> #include <linux/mutex.h> +#include <linux/rwsem.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/socket.h> @@ -195,7 +196,7 @@ static DEFINE_SPINLOCK(napi_hash_lock); static unsigned int napi_gen_id = NR_CPUS; static DEFINE_READ_MOSTLY_HASHTABLE(napi_hash, 8); -static seqcount_t devnet_rename_seq; +static DECLARE_RWSEM(devnet_rename_sem); static inline void dev_base_seq_inc(struct net *net) { @@ -899,33 +900,28 @@ EXPORT_SYMBOL(dev_get_by_napi_id); * @net: network namespace * @name: a pointer to the buffer where the name will be stored. * @ifindex: the ifindex of the interface to get the name from. - * - * The use of raw_seqcount_begin() and cond_resched() before - * retrying is required as we want to give the writers a chance - * to complete when CONFIG_PREEMPTION is not set. */ int netdev_get_name(struct net *net, char *name, int ifindex) { struct net_device *dev; - unsigned int seq; + int ret; -retry: - seq = raw_seqcount_begin(&devnet_rename_seq); + down_read(&devnet_rename_sem); rcu_read_lock(); + dev = dev_get_by_index_rcu(net, ifindex); if (!dev) { - rcu_read_unlock(); - return -ENODEV; + ret = -ENODEV; + goto out; } strcpy(name, dev->name); - rcu_read_unlock(); - if (read_seqcount_retry(&devnet_rename_seq, seq)) { - cond_resched(); - goto retry; - } - return 0; + ret = 0; +out: + rcu_read_unlock(); + up_read(&devnet_rename_sem); + return ret; } /** @@ -1198,10 +1194,10 @@ int dev_change_name(struct net_device *dev, const char *newname) likely(!(dev->priv_flags & IFF_LIVE_RENAME_OK))) return -EBUSY; - write_seqcount_begin(&devnet_rename_seq); + down_write(&devnet_rename_sem); if (strncmp(newname, dev->name, IFNAMSIZ) == 0) { - write_seqcount_end(&devnet_rename_seq); + up_write(&devnet_rename_sem); return 0; } @@ -1209,7 +1205,7 @@ int dev_change_name(struct net_device *dev, const char *newname) err = dev_get_valid_name(net, dev, newname); if (err < 0) { - write_seqcount_end(&devnet_rename_seq); + up_write(&devnet_rename_sem); return err; } @@ -1224,11 +1220,11 @@ int dev_change_name(struct net_device *dev, const char *newname) if (ret) { memcpy(dev->name, oldname, IFNAMSIZ); dev->name_assign_type = old_assign_type; - write_seqcount_end(&devnet_rename_seq); + up_write(&devnet_rename_sem); return ret; } - write_seqcount_end(&devnet_rename_seq); + up_write(&devnet_rename_sem); netdev_adjacent_rename_links(dev, oldname); @@ -1249,7 +1245,7 @@ int dev_change_name(struct net_device *dev, const char *newname) /* err >= 0 after dev_alloc_name() or stores the first errno */ if (err >= 0) { err = ret; - write_seqcount_begin(&devnet_rename_seq); + down_write(&devnet_rename_sem); memcpy(dev->name, oldname, IFNAMSIZ); memcpy(oldname, newname, IFNAMSIZ); dev->name_assign_type = old_assign_type; -- 2.25.1

From: NeilBrown <neilb@suse.de> [ Upstream commit 33f2c35a54dfd75ad0e7e86918dcbe4de799a56c ] Due to a bug introduced in Linux 3.14 we cannot determine the correctly layout for a multi-zone RAID0 array - there are two possibilities. It is possible to tell the kernel which to chose using a module parameter, but this can be clumsy to use. It would be best if the choice were recorded in the metadata. So add a feature flag for this purpose. If it is set, then the 'layout' field of the superblock is used to determine which layout to use. If this flag is not set, then mddev->layout gets set to -1, which causes the module parameter to be required. Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Conflicts: drivers/md/md.c [yyl: adjust context] Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/md/md.c | 13 +++++++++++++ drivers/md/raid0.c | 3 +++ include/uapi/linux/raid/md_p.h | 2 ++ 3 files changed, 18 insertions(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index 26698e375e9f..2d97062d9c0b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1195,6 +1195,8 @@ static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev) mddev->new_layout = mddev->layout; mddev->new_chunk_sectors = mddev->chunk_sectors; } + if (mddev->level == 0) + mddev->layout = -1; if (sb->state & (1<<MD_SB_CLEAN)) mddev->recovery_cp = MaxSector; @@ -1612,6 +1614,10 @@ static int super_1_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor_ rdev->ppl.sector = rdev->sb_start + rdev->ppl.offset; } + if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RAID0_LAYOUT) && + sb->level != 0) + return -EINVAL; + /* not spare disk, or LEVEL_MULTIPATH */ if (sb->level == cpu_to_le32(LEVEL_MULTIPATH) || (rdev->desc_nr >= 0 && @@ -1733,6 +1739,10 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev) mddev->new_chunk_sectors = mddev->chunk_sectors; } + if (mddev->level == 0 && + !(le32_to_cpu(sb->feature_map) & MD_FEATURE_RAID0_LAYOUT)) + mddev->layout = -1; + if (le32_to_cpu(sb->feature_map) & MD_FEATURE_JOURNAL) set_bit(MD_HAS_JOURNAL, &mddev->flags); @@ -6819,6 +6829,9 @@ static int set_array_info(struct mddev *mddev, mdu_array_info_t *info) mddev->external = 0; mddev->layout = info->layout; + if (mddev->level == 0) + /* Cannot trust RAID0 layout info here */ + mddev->layout = -1; mddev->chunk_sectors = info->chunk_size >> 9; if (mddev->persistent) { diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index efa9df2336da..0272102b207e 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -152,6 +152,9 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) if (conf->nr_strip_zones == 1) { conf->layout = RAID0_ORIG_LAYOUT; + } else if (mddev->layout == RAID0_ORIG_LAYOUT || + mddev->layout == RAID0_ALT_MULTIZONE_LAYOUT) { + conf->layout = mddev->layout; } else if (default_layout == RAID0_ORIG_LAYOUT || default_layout == RAID0_ALT_MULTIZONE_LAYOUT) { conf->layout = default_layout; diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h index b0d15c73f6d7..1f2d8c81f0e0 100644 --- a/include/uapi/linux/raid/md_p.h +++ b/include/uapi/linux/raid/md_p.h @@ -329,6 +329,7 @@ struct mdp_superblock_1 { #define MD_FEATURE_JOURNAL 512 /* support write cache */ #define MD_FEATURE_PPL 1024 /* support PPL */ #define MD_FEATURE_MULTIPLE_PPLS 2048 /* support for multiple PPLs */ +#define MD_FEATURE_RAID0_LAYOUT 4096 /* layout is meaningful for RAID0 */ #define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ |MD_FEATURE_RECOVERY_OFFSET \ |MD_FEATURE_RESHAPE_ACTIVE \ @@ -341,6 +342,7 @@ struct mdp_superblock_1 { |MD_FEATURE_JOURNAL \ |MD_FEATURE_PPL \ |MD_FEATURE_MULTIPLE_PPLS \ + |MD_FEATURE_RAID0_LAYOUT \ ) struct r5l_payload_header { -- 2.25.1

From: Kai Huang <kai.huang@linux.intel.com> [ Upstream commit f3ecb59dd49f1742b97df6ba071aaa3d031154ac ] Intel MKTME repurposes several high bits of physical address as 'keyID' for memory encryption thus effectively reduces platform's maximum physical address bits. Exactly how many bits are reduced is configured by BIOS. To honor such HW behavior, the repurposed bits are reduced from cpuinfo_x86->x86_phys_bits when MKTME is detected in CPU detection. Similarly, AMD SME/SEV also reduces physical address bits for memory encryption, and cpuinfo->x86_phys_bits is reduced too when SME/SEV is detected, so for both MKTME and SME/SEV, boot_cpu_data.x86_phys_bits doesn't hold physical address bits reported by CPUID anymore. Currently KVM treats bits from boot_cpu_data.x86_phys_bits to 51 as reserved bits, but it's not true anymore for MKTME, since MKTME treats those reduced bits as 'keyID', but not reserved bits. Therefore boot_cpu_data.x86_phys_bits cannot be used to calculate reserved bits anymore, although we can still use it for AMD SME/SEV since SME/SEV treats the reduced bits differently -- they are treated as reserved bits, the same as other reserved bits in page table entity [1]. Fix by introducing a new 'shadow_phys_bits' variable in KVM x86 MMU code to store the effective physical bits w/o reserved bits -- for MKTME, it equals to physical address reported by CPUID, and for SME/SEV, it is boot_cpu_data.x86_phys_bits. Note that for the physical address bits reported to guest should remain unchanged -- KVM should report physical address reported by CPUID to guest, but not boot_cpu_data.x86_phys_bits. Because for Intel MKTME, there's no harm if guest sets up 'keyID' bits in guest page table (since MKTME only works at physical address level), and KVM doesn't even expose MKTME to guest. Arguably, for AMD SME/SEV, guest is aware of SEV thus it should adjust boot_cpu_data.x86_phys_bits when it detects SEV, therefore KVM should still reports physcial address reported by CPUID to guest. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Kai Huang <kai.huang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/x86/kvm/mmu.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 80fc5bd4a32a..ea744cc0d3fc 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -281,6 +281,11 @@ static const u64 shadow_nonpresent_or_rsvd_mask_len = 5; */ static u64 __read_mostly shadow_nonpresent_or_rsvd_lower_gfn_mask; +/* + * The number of non-reserved physical address bits irrespective of features + * that repurpose legal bits, e.g. MKTME. + */ +static u8 __read_mostly shadow_phys_bits; static void mmu_spte_set(u64 *sptep, u64 spte); static bool is_executable_pte(u64 spte); @@ -464,6 +469,21 @@ void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask, } EXPORT_SYMBOL_GPL(kvm_mmu_set_mask_ptes); +static u8 kvm_get_shadow_phys_bits(void) +{ + /* + * boot_cpu_data.x86_phys_bits is reduced when MKTME is detected + * in CPU detection code, but MKTME treats those reduced bits as + * 'keyID' thus they are not reserved bits. Therefore for MKTME + * we should still return physical address bits reported by CPUID. + */ + if (!boot_cpu_has(X86_FEATURE_TME) || + WARN_ON_ONCE(boot_cpu_data.extended_cpuid_level < 0x80000008)) + return boot_cpu_data.x86_phys_bits; + + return cpuid_eax(0x80000008) & 0xff; +} + static void kvm_mmu_reset_all_pte_masks(void) { u8 low_phys_bits; @@ -477,6 +497,8 @@ static void kvm_mmu_reset_all_pte_masks(void) shadow_present_mask = 0; shadow_acc_track_mask = 0; + shadow_phys_bits = kvm_get_shadow_phys_bits(); + /* * If the CPU has 46 or less physical address bits, then set an * appropriate mask to guard against L1TF attacks. Otherwise, it is @@ -4544,7 +4566,7 @@ reset_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context) */ shadow_zero_check = &context->shadow_zero_check; __reset_rsvds_bits_mask(vcpu, shadow_zero_check, - boot_cpu_data.x86_phys_bits, + shadow_phys_bits, context->shadow_root_level, uses_nx, guest_cpuid_has(vcpu, X86_FEATURE_GBPAGES), is_pse(vcpu), true); @@ -4581,13 +4603,13 @@ reset_tdp_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, if (boot_cpu_is_amd()) __reset_rsvds_bits_mask(vcpu, shadow_zero_check, - boot_cpu_data.x86_phys_bits, + shadow_phys_bits, context->shadow_root_level, false, boot_cpu_has(X86_FEATURE_GBPAGES), true, true); else __reset_rsvds_bits_mask_ept(shadow_zero_check, - boot_cpu_data.x86_phys_bits, + shadow_phys_bits, false); if (!shadow_me_mask) @@ -4608,7 +4630,7 @@ reset_ept_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context, bool execonly) { __reset_rsvds_bits_mask_ept(&context->shadow_zero_check, - boot_cpu_data.x86_phys_bits, execonly); + shadow_phys_bits, execonly); } #define BYTE_MASK(access) \ @@ -6053,7 +6075,6 @@ static int set_nx_huge_pages(const char *val, const struct kernel_param *kp) static void kvm_set_mmio_spte_mask(void) { u64 mask; - int maxphyaddr = boot_cpu_data.x86_phys_bits; /* * Set the reserved bits and the present bit of an paging-structure @@ -6073,7 +6094,7 @@ static void kvm_set_mmio_spte_mask(void) * If reserved bit is not supported, clear the present bit to disable * mmio page fault. */ - if (maxphyaddr == 52) + if (shadow_phys_bits == 52) mask &= ~1ull; kvm_mmu_set_mmio_spte_mask(mask, mask); -- 2.25.1

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Merge 204 patches from 4.19.130 stable branch (208 total) beside 4 already merged patches: 5d2195b7b6c1 serial: amba-pl011: Make sure we initialize the port.lock spinlock b0873334bc7f ext4: stop overwrite the errcode in ext4_setup_super 2ee8f6e72269 bcache: fix potential deadlock problem in btree_gc_coalesce 49289b1fa5a6 block: Fix use-after-free in blkdev_get() Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index e6066502e9cc..6443cbd51f70 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 PATCHLEVEL = 19 -SUBLEVEL = 129 +SUBLEVEL = 130 EXTRAVERSION = NAME = "People's Front" -- 2.25.1