From: Suren Baghdasaryan <surenb@google.com> mainline inclusion from mainline-v6.15-rc1 commit 7f8ceea0c58039dcea3d31b8d5da58aa5f6e12bf category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/15458 CVE: CVE-2026-46181 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- For speculative lookups where a successful inc_not_zero() pins the object, but where we still need to double check if the object acquired is indeed the one we set out to acquire (identity check), needs this validation to happen *after* the increment. Similarly, when a new object is initialized and its memory might have been previously occupied by another object, all stores to initialize the object should happen *before* refcount initialization. Notably SLAB_TYPESAFE_BY_RCU is one such an example when this ordering is required for reference counting. Add refcount_{add|inc}_not_zero_acquire() to guarantee the proper ordering between acquiring a reference count on an object and performing the identity check for that object. Add refcount_set_release() to guarantee proper ordering between stores initializing object attributes and the store initializing the refcount. refcount_set_release() should be done after all other object attributes are initialized. Once refcount_set_release() is called, the object should be considered visible to other tasks even if it was not yet added into an object collection normally used to discover it. This is because other tasks might have discovered the object previously occupying the same memory and after memory reuse they can succeed in taking refcount for the new object and start using it. Object reuse example to consider: consumer: obj = lookup(collection, key); if (!refcount_inc_not_zero_acquire(&obj->ref)) return; if (READ_ONCE(obj->key) != key) { /* identity check */ put_ref(obj); return; } use(obj->value); producer: remove(collection, obj->key); if (!refcount_dec_and_test(&obj->ref)) return; obj->key = KEY_INVALID; free(obj); obj = malloc(); /* obj is reused */ obj->key = new_key; obj->value = new_value; refcount_set_release(obj->ref, 1); add(collection, new_key, obj); refcount_{add|inc}_not_zero_acquire() is required to prevent the following reordering when refcount_inc_not_zero() is used instead: consumer: obj = lookup(collection, key); if (READ_ONCE(obj->key) != key) { /* reordered identity check */ put_ref(obj); return; } producer: remove(collection, obj->key); if (!refcount_dec_and_test(&obj->ref)) return; obj->key = KEY_INVALID; free(obj); obj = malloc(); /* obj is reused */ obj->key = new_key; obj->value = new_value; refcount_set_release(obj->ref, 1); add(collection, new_key, obj); if (!refcount_inc_not_zero(&obj->ref)) return; use(obj->value); /* USING WRONG OBJECT */ refcount_set_release() is required to prevent the following reordering when refcount_set() is used instead: consumer: obj = lookup(collection, key); producer: remove(collection, obj->key); if (!refcount_dec_and_test(&obj->ref)) return; obj->key = KEY_INVALID; free(obj); obj = malloc(); /* obj is reused */ obj->key = new_key; /* new_key == old_key */ refcount_set(obj->ref, 1); if (!refcount_inc_not_zero_acquire(&obj->ref)) return; if (READ_ONCE(obj->key) != key) { /* pass since new_key == old_key */ put_ref(obj); return; } use(obj->value); /* USING STALE obj->value */ obj->value = new_value; /* reordered store */ add(collection, key, obj); [surenb@google.com: fix title underlines in refcount-vs-atomic.rst] Link: https://lkml.kernel.org/r/20250217161645.3137927-1-surenb@google.com Link: https://lkml.kernel.org/r/20250213224655.1680278-11-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> [slab] Tested-by: Shivank Garg <shivankg@amd.com> Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Sourav Panda <souravpanda@google.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Conflicts: Documentation/RCU/whatisRCU.rst Documentation/core-api/refcount-vs-atomic.rst include/linux/refcount.h include/linux/slab.h [Only context conflicts] Signed-off-by: Cai Xinchen <caixinchen1@huawei.com> Signed-off-by: Cai Xinchen <caixinchen1@huawei.com> --- Documentation/core-api/refcount-vs-atomic.rst | 37 +++++- include/linux/refcount.h | 106 ++++++++++++++++++ include/linux/slab.h | 9 ++ 3 files changed, 146 insertions(+), 6 deletions(-) diff --git a/Documentation/core-api/refcount-vs-atomic.rst b/Documentation/core-api/refcount-vs-atomic.rst index 79a009ce11df..94e628c1eb49 100644 --- a/Documentation/core-api/refcount-vs-atomic.rst +++ b/Documentation/core-api/refcount-vs-atomic.rst @@ -86,7 +86,19 @@ Memory ordering guarantee changes: * none (both fully unordered) -case 2) - increment-based ops that return no value +case 2) - non-"Read/Modify/Write" (RMW) ops with release ordering +----------------------------------------------------------------- + +Function changes: + + * atomic_set_release() --> refcount_set_release() + +Memory ordering guarantee changes: + + * none (both provide RELEASE ordering) + + +case 3) - increment-based ops that return no value -------------------------------------------------- Function changes: @@ -98,7 +110,7 @@ Memory ordering guarantee changes: * none (both fully unordered) -case 3) - decrement-based RMW ops that return no value +case 4) - decrement-based RMW ops that return no value ------------------------------------------------------ Function changes: @@ -110,7 +122,7 @@ Memory ordering guarantee changes: * fully unordered --> RELEASE ordering -case 4) - increment-based RMW ops that return a value +case 5) - increment-based RMW ops that return a value ----------------------------------------------------- Function changes: @@ -126,7 +138,20 @@ Memory ordering guarantees changes: result of obtaining pointer to the object! -case 5) - generic dec/sub decrement-based RMW ops that return a value +case 6) - increment-based RMW ops with acquire ordering that return a value +--------------------------------------------------------------------------- + +Function changes: + + * atomic_inc_not_zero() --> refcount_inc_not_zero_acquire() + * no atomic counterpart --> refcount_add_not_zero_acquire() + +Memory ordering guarantees changes: + + * fully ordered --> ACQUIRE ordering on success + + +case 7) - generic dec/sub decrement-based RMW ops that return a value --------------------------------------------------------------------- Function changes: @@ -139,7 +164,7 @@ Memory ordering guarantees changes: * fully ordered --> RELEASE ordering + ACQUIRE ordering on success -case 6) other decrement-based RMW ops that return a value +case 8) other decrement-based RMW ops that return a value --------------------------------------------------------- Function changes: @@ -154,7 +179,7 @@ Memory ordering guarantees changes: .. note:: atomic_add_unless() only provides full order on success. -case 7) - lock-based RMW +case 9) - lock-based RMW ------------------------ Function changes: diff --git a/include/linux/refcount.h b/include/linux/refcount.h index 497990c69b0b..22faffb7c17e 100644 --- a/include/linux/refcount.h +++ b/include/linux/refcount.h @@ -87,6 +87,15 @@ * The decrements dec_and_test() and sub_and_test() also provide acquire * ordering on success. * + * refcount_{add|inc}_not_zero_acquire() and refcount_set_release() provide + * acquire and release ordering for cases when the memory occupied by the + * object might be reused to store another object. This is important for the + * cases where secondary validation is required to detect such reuse, e.g. + * SLAB_TYPESAFE_BY_RCU. The secondary validation checks have to happen after + * the refcount is taken, hence acquire order is necessary. Similarly, when the + * object is initialized, all stores to its attributes should be visible before + * the refcount is set, otherwise a stale attribute value might be used by + * another task which succeeds in taking a refcount to the new object. */ #ifndef _LINUX_REFCOUNT_H @@ -136,6 +145,31 @@ static inline void refcount_set(refcount_t *r, int n) atomic_set(&r->refs, n); } +/** + * refcount_set_release - set a refcount's value with release ordering + * @r: the refcount + * @n: value to which the refcount will be set + * + * This function should be used when memory occupied by the object might be + * reused to store another object -- consider SLAB_TYPESAFE_BY_RCU. + * + * Provides release memory ordering which will order previous memory operations + * against this store. This ensures all updates to this object are visible + * once the refcount is set and stale values from the object previously + * occupying this memory are overwritten with new ones. + * + * This function should be called only after new object is fully initialized. + * After this call the object should be considered visible to other tasks even + * if it was not yet added into an object collection normally used to discover + * it. This is because other tasks might have discovered the object previously + * occupying the same memory and after memory reuse they can succeed in taking + * refcount to the new object and start using it. + */ +static inline void refcount_set_release(refcount_t *r, int n) +{ + atomic_set_release(&r->refs, n); +} + /** * refcount_read - get a refcount's value * @r: the refcount @@ -188,6 +222,52 @@ static inline __must_check bool refcount_add_not_zero(int i, refcount_t *r) return __refcount_add_not_zero(i, r, NULL); } +static inline __must_check +bool __refcount_add_not_zero_acquire(int i, refcount_t *r, int *oldp) +{ + int old = refcount_read(r); + + do { + if (!old) + break; + } while (!atomic_try_cmpxchg_acquire(&r->refs, &old, old + i)); + + if (oldp) + *oldp = old; + + if (unlikely(old < 0 || old + i < 0)) + refcount_warn_saturate(r, REFCOUNT_ADD_NOT_ZERO_OVF); + + return old; +} + +/** + * refcount_add_not_zero_acquire - add a value to a refcount with acquire ordering unless it is 0 + * + * @i: the value to add to the refcount + * @r: the refcount + * + * Will saturate at REFCOUNT_SATURATED and WARN. + * + * This function should be used when memory occupied by the object might be + * reused to store another object -- consider SLAB_TYPESAFE_BY_RCU. + * + * Provides acquire memory ordering on success, it is assumed the caller has + * guaranteed the object memory to be stable (RCU, etc.). It does provide a + * control dependency and thereby orders future stores. See the comment on top. + * + * Use of this function is not recommended for the normal reference counting + * use case in which references are taken and released one at a time. In these + * cases, refcount_inc_not_zero_acquire() should instead be used to increment a + * reference count. + * + * Return: false if the passed refcount is 0, true otherwise + */ +static inline __must_check bool refcount_add_not_zero_acquire(int i, refcount_t *r) +{ + return __refcount_add_not_zero_acquire(i, r, NULL); +} + static inline void __refcount_add(int i, refcount_t *r, int *oldp) { int old = atomic_fetch_add_relaxed(i, &r->refs); @@ -245,6 +325,32 @@ static inline __must_check bool refcount_inc_not_zero(refcount_t *r) return __refcount_inc_not_zero(r, NULL); } +static inline __must_check bool __refcount_inc_not_zero_acquire(refcount_t *r, int *oldp) +{ + return __refcount_add_not_zero_acquire(1, r, oldp); +} + +/** + * refcount_inc_not_zero_acquire - increment a refcount with acquire ordering unless it is 0 + * @r: the refcount to increment + * + * Similar to refcount_inc_not_zero(), but provides acquire memory ordering on + * success. + * + * This function should be used when memory occupied by the object might be + * reused to store another object -- consider SLAB_TYPESAFE_BY_RCU. + * + * Provides acquire memory ordering on success, it is assumed the caller has + * guaranteed the object memory to be stable (RCU, etc.). It does provide a + * control dependency and thereby orders future stores. See the comment on top. + * + * Return: true if the increment was successful, false otherwise + */ +static inline __must_check bool refcount_inc_not_zero_acquire(refcount_t *r) +{ + return __refcount_inc_not_zero_acquire(r, NULL); +} + static inline void __refcount_inc(refcount_t *r, int *oldp) { __refcount_add(1, r, oldp); diff --git a/include/linux/slab.h b/include/linux/slab.h index d78d8fbd8c16..d49470dbe43c 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -75,6 +75,15 @@ * rcu_read_lock before reading the address, then rcu_read_unlock after * taking the spinlock within the structure expected at that address. * + * Note that object identity check has to be done *after* acquiring a + * reference, therefore user has to ensure proper ordering for loads. + * Similarly, when initializing objects allocated with SLAB_TYPESAFE_BY_RCU, + * the newly allocated object has to be fully initialized *before* its + * refcount gets initialized and proper ordering for stores is required. + * refcount_{add|inc}_not_zero_acquire() and refcount_set_release() are + * designed with the proper fences required for reference counting objects + * allocated with SLAB_TYPESAFE_BY_RCU. + * * Note that SLAB_TYPESAFE_BY_RCU was originally named SLAB_DESTROY_BY_RCU. */ /* Defer freeing slabs to RCU */ -- 2.18.0.huawei.25