[PATCH openEuler-5.10-LTS-SP1 01/87] NFSD: Fix verifier returned in stable WRITEs
From: Chuck Lever <chuck.lever@oracle.com> stable inclusion from stable-v5.10.143 commit d3d885507b52b28f54770a42d650251876d433a3 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit f11ad7aa653130b71e2e89bed207f387718216d5 upstream. RFC 8881 explains the purpose of the write verifier this way:
The final portion of the result is the field writeverf. This field is the write verifier and is a cookie that the client can use to determine whether a server has changed instance state (e.g., server restart) between a call to WRITE and a subsequent call to either WRITE or COMMIT.
But then it says:
This cookie MUST be unchanged during a single instance of the NFSv4.1 server and MUST be unique between instances of the NFSv4.1 server. If the cookie changes, then the client MUST assume that any data written with an UNSTABLE4 value for committed and an old writeverf in the reply has been lost and will need to be recovered.
RFC 1813 has similar language for NFSv3. NFSv2 does not have a write verifier since it doesn't implement the COMMIT procedure. Since commit 19e0663ff9bc ("nfsd: Ensure sampling of the write verifier is atomic with the write"), the Linux NFS server has returned a boot-time-based verifier for UNSTABLE WRITEs, but a zero verifier for FILE_SYNC and DATA_SYNC WRITEs. FILE_SYNC and DATA_SYNC WRITEs are not followed up with a COMMIT, so there's no need for clients to compare verifiers for stable writes. However, by returning a different verifier for stable and unstable writes, the above commit puts the Linux NFS server a step farther out of compliance with the first MUST above. At least one NFS client (FreeBSD) noticed the difference, making this a potential regression. [Removed down_write to fix the conflict in the cherry-pick. The down_write functionality was no longer needed there. Upstream commit 555dbf1a9aac6d3150c8b52fa35f768a692f4eeb titled nfsd: Replace use of rwsem with errseq_t removed those and replace it with new functionality that was more scalable. This commit is already backported onto 5.10 and so removing down_write ensures consistency with that change. Tested by compiling and booting successfully. - kochera] Reported-by: Rick Macklem <rmacklem@uoguelph.ca> Link: https://lore.kernel.org/linux-nfs/YQXPR0101MB096857EEACF04A6DF1FC6D9BDD749@Y... Fixes: 19e0663ff9bc ("nfsd: Ensure sampling of the write verifier is atomic with the write") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Michael Kochera <kochera@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/nfsd/vfs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index c852bb5ff212..a4ae1fcd2ab1 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1014,6 +1014,10 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct nfsd_file *nf, iov_iter_kvec(&iter, WRITE, vec, vlen, *cnt); since = READ_ONCE(file->f_wb_err); if (flags & RWF_SYNC) { + if (verf) + nfsd_copy_boot_verifier(verf, + net_generic(SVC_NET(rqstp), + nfsd_net_id)); host_err = vfs_iter_write(file, &iter, &pos, flags); if (host_err < 0) nfsd_reset_boot_verifier(net_generic(SVC_NET(rqstp), -- 2.25.1
From: SeongJae Park <sj@kernel.org> stable inclusion from stable-v5.10.143 commit 186cb020bd3ab1248b5651e11de0d1abc696c65a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit fe8f65b018effbf473f53af3538d0c1878b8b329 upstream. Xen blkfront advertises its support of the persistent grants feature when it first setting up and when resuming in 'talk_to_blkback()'. Then, blkback reads the advertised value when it connects with blkfront and decides if it will use the persistent grants feature or not, and advertises its decision to blkfront. Blkfront reads the blkback's decision and it also makes the decision for the use of the feature. Commit 402c43ea6b34 ("xen-blkfront: Apply 'feature_persistent' parameter when connect"), however, made the blkfront's read of the parameter for disabling the advertisement, namely 'feature_persistent', to be done when it negotiate, not when advertise. Therefore blkfront advertises without reading the parameter. As the field for caching the parameter value is zero-initialized, it always advertises as the feature is disabled, so that the persistent grants feature becomes always disabled. This commit fixes the issue by making the blkfront does parmeter caching just before the advertisement. Fixes: 402c43ea6b34 ("xen-blkfront: Apply 'feature_persistent' parameter when connect") Cc: <stable@vger.kernel.org> # 5.10.x Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: SeongJae Park <sj@kernel.org> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220831165824.94815-4-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/block/xen-blkfront.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 9d5460f6e0ff..6f33d62331b1 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1852,6 +1852,12 @@ static void free_info(struct blkfront_info *info) kfree(info); } +/* Enable the persistent grants feature. */ +static bool feature_persistent = true; +module_param(feature_persistent, bool, 0644); +MODULE_PARM_DESC(feature_persistent, + "Enables the persistent grants feature"); + /* Common code used when first setting up, and when resuming. */ static int talk_to_blkback(struct xenbus_device *dev, struct blkfront_info *info) @@ -1943,6 +1949,7 @@ static int talk_to_blkback(struct xenbus_device *dev, message = "writing protocol"; goto abort_transaction; } + info->feature_persistent_parm = feature_persistent; err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u", info->feature_persistent_parm); if (err) @@ -2019,12 +2026,6 @@ static int negotiate_mq(struct blkfront_info *info) return 0; } -/* Enable the persistent grants feature. */ -static bool feature_persistent = true; -module_param(feature_persistent, bool, 0644); -MODULE_PARM_DESC(feature_persistent, - "Enables the persistent grants feature"); - /** * Entry point to this code when a new device is created. Allocate the basic * structures and the ring buffer for communication with the backend, and @@ -2394,7 +2395,6 @@ static void blkfront_gather_backend_features(struct blkfront_info *info) if (xenbus_read_unsigned(info->xbdev->otherend, "feature-discard", 0)) blkfront_setup_discard(info); - info->feature_persistent_parm = feature_persistent; if (info->feature_persistent_parm) info->feature_persistent = !!xenbus_read_unsigned(info->xbdev->otherend, -- 2.25.1
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> stable inclusion from stable-v5.10.143 commit fb6cadd2a30fcfd5ec0b3b0207f32ea0630e64b5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 4bb1a53be85fcb1e24c14860e326a00cdd362c28 upstream. syzbot is reporting use of uninitialized spinlock at gsmld_write() [1], for commit 32dd59f ("tty: n_gsm: fix race condition in gsmld_write()") allows accessing gsm->tx_lock before gsm_activate_mux() initializes it. Since object initialization should be done right after allocation in order to avoid accessing uninitialized memory, move initialization of timer/work/waitqueue/spinlock from gsmld_open()/gsm_activate_mux() to gsm_alloc_mux(). Link: https://syzkaller.appspot.com/bug?extid=cf155def4e717db68a12 [1] Fixes: 32dd59f ("tty: n_gsm: fix race condition in gsmld_write()") Reported-by: syzbot <syzbot+cf155def4e717db68a12@syzkaller.appspotmail.com> Tested-by: syzbot <syzbot+cf155def4e717db68a12@syzkaller.appspotmail.com> Cc: stable <stable@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/2110618e-57f0-c1ce-b2ad-b6cacef3f60e@I-love.SAKURA... Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/n_gsm.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index cb5ed4155a8d..c2212f52a603 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2200,11 +2200,6 @@ static int gsm_activate_mux(struct gsm_mux *gsm) { struct gsm_dlci *dlci; - timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0); - init_waitqueue_head(&gsm->event); - spin_lock_init(&gsm->control_lock); - spin_lock_init(&gsm->tx_lock); - if (gsm->encoding == 0) gsm->receive = gsm0_receive; else @@ -2306,6 +2301,10 @@ static struct gsm_mux *gsm_alloc_mux(void) mutex_init(&gsm->mutex); kref_init(&gsm->ref); INIT_LIST_HEAD(&gsm->tx_list); + timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0); + init_waitqueue_head(&gsm->event); + spin_lock_init(&gsm->control_lock); + spin_lock_init(&gsm->tx_lock); gsm->t1 = T1; gsm->t2 = T2; -- 2.25.1
From: Fedor Pchelkin <pchelkin@ispras.ru> stable inclusion from stable-v5.10.143 commit eb75efdec8dd0f01ac85c88feafa6e63b34a2521 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 902e02ea9385373ce4b142576eef41c642703955 upstream. Syzkaller reports the following problem: BUG: sleeping function called from invalid context at kernel/printk/printk.c:2347 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1105, name: syz-executor423 3 locks held by syz-executor423/1105: #0: ffff8881468b9098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x22/0x90 drivers/tty/tty_ldisc.c:266 #1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: tty_write_lock drivers/tty/tty_io.c:952 [inline] #1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: do_tty_write drivers/tty/tty_io.c:975 [inline] #1: ffff8881468b9130 (&tty->atomic_write_lock){+.+.}-{3:3}, at: file_tty_write.constprop.0+0x2a8/0x8e0 drivers/tty/tty_io.c:1118 #2: ffff88801b06c398 (&gsm->tx_lock){....}-{2:2}, at: gsmld_write+0x5e/0x150 drivers/tty/n_gsm.c:2717 irq event stamp: 3482 hardirqs last enabled at (3481): [<ffffffff81d13343>] __get_reqs_available+0x143/0x2f0 fs/aio.c:946 hardirqs last disabled at (3482): [<ffffffff87d39722>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (3482): [<ffffffff87d39722>] _raw_spin_lock_irqsave+0x52/0x60 kernel/locking/spinlock.c:159 softirqs last enabled at (3408): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20 softirqs last disabled at (3401): [<ffffffff87e01002>] asm_call_irq_on_stack+0x12/0x20 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 2 PID: 1105 Comm: syz-executor423 Not tainted 5.10.137-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:118 ___might_sleep.cold+0x1e8/0x22e kernel/sched/core.c:7304 console_lock+0x19/0x80 kernel/printk/printk.c:2347 do_con_write+0x113/0x1de0 drivers/tty/vt/vt.c:2909 con_write+0x22/0xc0 drivers/tty/vt/vt.c:3296 gsmld_write+0xd0/0x150 drivers/tty/n_gsm.c:2720 do_tty_write drivers/tty/tty_io.c:1028 [inline] file_tty_write.constprop.0+0x502/0x8e0 drivers/tty/tty_io.c:1118 call_write_iter include/linux/fs.h:1903 [inline] aio_write+0x355/0x7b0 fs/aio.c:1580 __io_submit_one fs/aio.c:1952 [inline] io_submit_one+0xf45/0x1a90 fs/aio.c:1999 __do_sys_io_submit fs/aio.c:2058 [inline] __se_sys_io_submit fs/aio.c:2028 [inline] __x64_sys_io_submit+0x18c/0x2f0 fs/aio.c:2028 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6 The problem happens in the following control flow: gsmld_write(...) spin_lock_irqsave(&gsm->tx_lock, flags) // taken a spinlock on TX data con_write(...) do_con_write(...) console_lock() might_sleep() // -> bug As far as console_lock() might sleep it should not be called with spinlock held. The patch replaces tx_lock spinlock with mutex in order to avoid the problem. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 32dd59f ("tty: n_gsm: fix race condition in gsmld_write()") Cc: stable <stable@kernel.org> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/20220829131640.69254-3-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/n_gsm.c | 39 ++++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 21 deletions(-) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index c2212f52a603..c91a3004931f 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -235,7 +235,7 @@ struct gsm_mux { int old_c_iflag; /* termios c_iflag value before attach */ bool constipated; /* Asked by remote to shut up */ - spinlock_t tx_lock; + struct mutex tx_mutex; unsigned int tx_bytes; /* TX data outstanding */ #define TX_THRESH_HI 8192 #define TX_THRESH_LO 2048 @@ -820,15 +820,14 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) * * Add data to the transmit queue and try and get stuff moving * out of the mux tty if not already doing so. Take the - * the gsm tx lock and dlci lock. + * the gsm tx mutex and dlci lock. */ static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) { - unsigned long flags; - spin_lock_irqsave(&dlci->gsm->tx_lock, flags); + mutex_lock(&dlci->gsm->tx_mutex); __gsm_data_queue(dlci, msg); - spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); + mutex_unlock(&dlci->gsm->tx_mutex); } /** @@ -840,7 +839,7 @@ static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg) * is data. Keep to the MRU of the mux. This path handles the usual tty * interface which is a byte stream with optional modem data. * - * Caller must hold the tx_lock of the mux. + * Caller must hold the tx_mutex of the mux. */ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) @@ -903,7 +902,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci) * is data. Keep to the MRU of the mux. This path handles framed data * queued as skbuffs to the DLCI. * - * Caller must hold the tx_lock of the mux. + * Caller must hold the tx_mutex of the mux. */ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, @@ -919,7 +918,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, if (dlci->adaption == 4) overhead = 1; - /* dlci->skb is locked by tx_lock */ + /* dlci->skb is locked by tx_mutex */ if (dlci->skb == NULL) { dlci->skb = skb_dequeue_tail(&dlci->skb_list); if (dlci->skb == NULL) @@ -1019,13 +1018,12 @@ static void gsm_dlci_data_sweep(struct gsm_mux *gsm) static void gsm_dlci_data_kick(struct gsm_dlci *dlci) { - unsigned long flags; int sweep; if (dlci->constipated) return; - spin_lock_irqsave(&dlci->gsm->tx_lock, flags); + mutex_lock(&dlci->gsm->tx_mutex); /* If we have nothing running then we need to fire up */ sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO); if (dlci->gsm->tx_bytes == 0) { @@ -1036,7 +1034,7 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci) } if (sweep) gsm_dlci_data_sweep(dlci->gsm); - spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags); + mutex_unlock(&dlci->gsm->tx_mutex); } /* @@ -1258,7 +1256,6 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, const u8 *data, int clen) { u8 buf[1]; - unsigned long flags; switch (command) { case CMD_CLD: { @@ -1280,9 +1277,9 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, gsm->constipated = false; gsm_control_reply(gsm, CMD_FCON, NULL, 0); /* Kick the link in case it is idling */ - spin_lock_irqsave(&gsm->tx_lock, flags); + mutex_lock(&gsm->tx_mutex); gsm_data_kick(gsm, NULL); - spin_unlock_irqrestore(&gsm->tx_lock, flags); + mutex_unlock(&gsm->tx_mutex); break; case CMD_FCOFF: /* Modem wants us to STFU */ @@ -2228,6 +2225,7 @@ static void gsm_free_mux(struct gsm_mux *gsm) break; } } + mutex_destroy(&gsm->tx_mutex); mutex_destroy(&gsm->mutex); kfree(gsm->txframe); kfree(gsm->buf); @@ -2299,12 +2297,12 @@ static struct gsm_mux *gsm_alloc_mux(void) } spin_lock_init(&gsm->lock); mutex_init(&gsm->mutex); + mutex_init(&gsm->tx_mutex); kref_init(&gsm->ref); INIT_LIST_HEAD(&gsm->tx_list); timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0); init_waitqueue_head(&gsm->event); spin_lock_init(&gsm->control_lock); - spin_lock_init(&gsm->tx_lock); gsm->t1 = T1; gsm->t2 = T2; @@ -2329,6 +2327,7 @@ static struct gsm_mux *gsm_alloc_mux(void) } spin_unlock(&gsm_mux_lock); if (i == MAX_MUX) { + mutex_destroy(&gsm->tx_mutex); mutex_destroy(&gsm->mutex); kfree(gsm->txframe); kfree(gsm->buf); @@ -2653,16 +2652,15 @@ static int gsmld_open(struct tty_struct *tty) static void gsmld_write_wakeup(struct tty_struct *tty) { struct gsm_mux *gsm = tty->disc_data; - unsigned long flags; /* Queue poll */ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); - spin_lock_irqsave(&gsm->tx_lock, flags); + mutex_lock(&gsm->tx_mutex); gsm_data_kick(gsm, NULL); if (gsm->tx_bytes < TX_THRESH_LO) { gsm_dlci_data_sweep(gsm); } - spin_unlock_irqrestore(&gsm->tx_lock, flags); + mutex_unlock(&gsm->tx_mutex); } /** @@ -2705,7 +2703,6 @@ static ssize_t gsmld_write(struct tty_struct *tty, struct file *file, const unsigned char *buf, size_t nr) { struct gsm_mux *gsm = tty->disc_data; - unsigned long flags; int space; int ret; @@ -2713,13 +2710,13 @@ static ssize_t gsmld_write(struct tty_struct *tty, struct file *file, return -ENODEV; ret = -ENOBUFS; - spin_lock_irqsave(&gsm->tx_lock, flags); + mutex_lock(&gsm->tx_mutex); space = tty_write_room(tty); if (space >= nr) ret = tty->ops->write(tty, buf, nr); else set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); - spin_unlock_irqrestore(&gsm->tx_lock, flags); + mutex_unlock(&gsm->tx_mutex); return ret; } -- 2.25.1
From: Ard Biesheuvel <ardb@kernel.org> stable inclusion from stable-v5.10.143 commit 94f0f30b2d9dcc3ac920029b518bff99f5b66f79 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 1a3887924a7e6edd331be76da7bf4c1e8eab4b1e upstream. The EFI stub is a wrapper around the core kernel that makes it look like a EFI compatible PE/COFF application to the EFI firmware. EFI applications run on top of the EFI runtime, which is heavily based on so-called protocols, which are struct types consisting [mostly] of function pointer members that are instantiated and recorded in a protocol database. These structs look like the ideal randomization candidates to the randstruct plugin (as they only carry function pointers), but of course, these protocols are contracts between the firmware that exposes them, and the EFI applications (including our stubbed kernel) that invoke them. This means that struct randomization for EFI protocols is not a great idea, and given that the stub shares very little data with the core kernel that is represented as a randomizable struct, we're better off just disabling it completely here. Cc: <stable@vger.kernel.org> # v4.14+ Reported-by: Daniel Marth <daniel.marth@inso.tuwien.ac.at> Tested-by: Daniel Marth <daniel.marth@inso.tuwien.ac.at> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/firmware/efi/libstub/Makefile | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile index 6d4add16e9a3..770d5807c744 100644 --- a/drivers/firmware/efi/libstub/Makefile +++ b/drivers/firmware/efi/libstub/Makefile @@ -39,6 +39,13 @@ KBUILD_CFLAGS := $(cflags-y) -Os -DDISABLE_BRANCH_PROFILING \ $(call cc-option,-fno-addrsig) \ -D__DISABLE_EXPORTS +# +# struct randomization only makes sense for Linux internal types, which the EFI +# stub code never touches, so let's turn off struct randomization for the stub +# altogether +# +KBUILD_CFLAGS := $(filter-out $(RANDSTRUCT_CFLAGS), $(KBUILD_CFLAGS)) + # remove SCS flags from all objects in this directory KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS)) -- 2.25.1
From: Stanislaw Gruszka <stf_xl@wp.pl> stable inclusion from stable-v5.10.143 commit 2946d2ae5ace3ad77f9d1710a1eeb279070b3caf category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 6d0ef7241553f3553a0a2764c69b07892705924c upstream. This reverts commit a8eb8e6f7159c7c20c0ddac428bde3d110890aa7 as it can cause invalid link quality command sent to the firmware and address the off-by-one issue by fixing condition of while loop. Cc: stable@vger.kernel.org Fixes: a8eb8e6f7159 ("wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()") Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220815073737.GA999388@wp.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/wireless/intel/iwlegacy/4965-rs.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/wireless/intel/iwlegacy/4965-rs.c b/drivers/net/wireless/intel/iwlegacy/4965-rs.c index 532e3b91777d..150805aec407 100644 --- a/drivers/net/wireless/intel/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/intel/iwlegacy/4965-rs.c @@ -2403,7 +2403,7 @@ il4965_rs_fill_link_cmd(struct il_priv *il, struct il_lq_sta *lq_sta, /* Repeat initial/next rate. * For legacy IL_NUMBER_TRY == 1, this loop will not execute. * For HT IL_HT_NUMBER_TRY == 3, this executes twice. */ - while (repeat_rate > 0) { + while (repeat_rate > 0 && idx < (LINK_QUAL_MAX_RETRY_NUM - 1)) { if (is_legacy(tbl_type.lq_type)) { if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) ant_toggle_cnt++; @@ -2422,8 +2422,6 @@ il4965_rs_fill_link_cmd(struct il_priv *il, struct il_lq_sta *lq_sta, cpu_to_le32(new_rate); repeat_rate--; idx++; - if (idx >= LINK_QUAL_MAX_RETRY_NUM) - goto out; } il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, @@ -2468,7 +2466,6 @@ il4965_rs_fill_link_cmd(struct il_priv *il, struct il_lq_sta *lq_sta, repeat_rate--; } -out: lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF; lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; -- 2.25.1
From: Yee Lee <yee.lee@mediatek.com> stable inclusion from stable-v5.10.143 commit a14f1799ce373b435a2a6253747dedc23ea35abc category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- This reverts commit 23c2d497de21f25898fbea70aeb292ab8acc8c94. Commit 23c2d497de21 ("mm: kmemleak: take a full lowmem check in kmemleak_*_phys()") brought false leak alarms on some archs like arm64 that does not init pfn boundary in early booting. The final solution lands on linux-6.0: commit 0c24e061196c ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA"). Revert this commit before linux-6.0. The original issue of invalid PA can be mitigated by additional check in devicetree. The false alarm report is as following: Kmemleak output: (Qemu/arm64) unreferenced object 0xffff0000c0170a00 (size 128): comm "swapper/0", pid 1, jiffies 4294892404 (age 126.208s) hex dump (first 32 bytes): 62 61 73 65 00 00 00 00 00 00 00 00 00 00 00 00 base............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] __kmalloc_track_caller+0x1b0/0x2e4 [<(____ptrval____)>] kstrdup_const+0x8c/0xc4 [<(____ptrval____)>] kvasprintf_const+0xbc/0xec [<(____ptrval____)>] kobject_set_name_vargs+0x58/0xe4 [<(____ptrval____)>] kobject_add+0x84/0x100 [<(____ptrval____)>] __of_attach_node_sysfs+0x78/0xec [<(____ptrval____)>] of_core_init+0x68/0x104 [<(____ptrval____)>] driver_init+0x28/0x48 [<(____ptrval____)>] do_basic_setup+0x14/0x28 [<(____ptrval____)>] kernel_init_freeable+0x110/0x178 [<(____ptrval____)>] kernel_init+0x20/0x1a0 [<(____ptrval____)>] ret_from_fork+0x10/0x20 This pacth is also applicable to linux-5.17.y/linux-5.18.y/linux-5.19.y Cc: <stable@vger.kernel.org> Signed-off-by: Yee Lee <yee.lee@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- mm/kmemleak.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 118be6533374..90eb82299149 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1124,7 +1124,7 @@ EXPORT_SYMBOL(kmemleak_no_scan); void __ref kmemleak_alloc_phys(phys_addr_t phys, size_t size, int min_count, gfp_t gfp) { - if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn) + if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn) kmemleak_alloc(__va(phys), size, min_count, gfp); } EXPORT_SYMBOL(kmemleak_alloc_phys); @@ -1138,7 +1138,7 @@ EXPORT_SYMBOL(kmemleak_alloc_phys); */ void __ref kmemleak_free_part_phys(phys_addr_t phys, size_t size) { - if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn) + if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn) kmemleak_free_part(__va(phys), size); } EXPORT_SYMBOL(kmemleak_free_part_phys); @@ -1150,7 +1150,7 @@ EXPORT_SYMBOL(kmemleak_free_part_phys); */ void __ref kmemleak_not_leak_phys(phys_addr_t phys) { - if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn) + if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn) kmemleak_not_leak(__va(phys)); } EXPORT_SYMBOL(kmemleak_not_leak_phys); @@ -1162,7 +1162,7 @@ EXPORT_SYMBOL(kmemleak_not_leak_phys); */ void __ref kmemleak_ignore_phys(phys_addr_t phys) { - if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn) + if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn) kmemleak_ignore(__va(phys)); } EXPORT_SYMBOL(kmemleak_ignore_phys); -- 2.25.1
From: Tony Battersby <tonyb@cybernetics.com> stable inclusion from stable-v5.10.143 commit 004e26ef056c5df46f42d15610473c6dc08920e2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 53661ded2460b414644532de6b99bd87f71987e9 ] This partially reverts commit d2b292c3f6fd ("scsi: qla2xxx: Enable ATIO interrupt handshake for ISP27XX") For some workloads where the host sends a batch of commands and then pauses, ATIO interrupt coalesce can cause some incoming ATIO entries to be ignored for extended periods of time, resulting in slow performance, timeouts, and aborted commands. Disable interrupt coalesce and re-enable the dedicated ATIO MSI-X interrupt. Link: https://lore.kernel.org/r/97dcf365-89ff-014d-a3e5-1404c6af511c@cybernetics.c... Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/scsi/qla2xxx/qla_target.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index ba823e8eb902..ecb30c2738b8 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -6817,14 +6817,8 @@ qlt_24xx_config_rings(struct scsi_qla_host *vha) if (ha->flags.msix_enabled) { if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) { - if (IS_QLA2071(ha)) { - /* 4 ports Baker: Enable Interrupt Handshake */ - icb->msix_atio = 0; - icb->firmware_options_2 |= cpu_to_le32(BIT_26); - } else { - icb->msix_atio = cpu_to_le16(msix->entry); - icb->firmware_options_2 &= cpu_to_le32(~BIT_26); - } + icb->msix_atio = cpu_to_le16(msix->entry); + icb->firmware_options_2 &= cpu_to_le32(~BIT_26); ql_dbg(ql_dbg_init, vha, 0xf072, "Registering ICB vector 0x%x for atio que.\n", msix->entry); -- 2.25.1
From: Guixin Liu <kanie@linux.alibaba.com> stable inclusion from stable-v5.10.143 commit a175aed83eb4bfcc9697e29c8c14c5379886e955 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8c499e49240bd93628368c3588975cfb94169b8b ] When allocating log_to_span fails, kfree(instance->ctrl_context) is called twice. Remove redundant call. Link: https://lore.kernel.org/r/1659424729-46502-1-git-send-email-kanie@linux.alib... Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 1cfa2c9db4f2..39d11c7055b1 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -5209,7 +5209,6 @@ megasas_alloc_fusion_context(struct megasas_instance *instance) if (!fusion->log_to_span) { dev_err(&instance->pdev->dev, "Failed from %s %d\n", __func__, __LINE__); - kfree(instance->ctrl_context); return -ENOMEM; } } -- 2.25.1
From: Jeffy Chen <jeffy.chen@rock-chips.com> stable inclusion from stable-v5.10.143 commit 67bf86ff81fe6e222e4f434251de4b45239444b4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit ea2aa97ca37a9044ade001aef71dbc06318e8d44 ] Currently we are assuming a one to one mapping between dmabuf and GEM handle when releasing GEM handles. But that is not always true, since we would create extra handles for the GEM obj in cases like gem_open() and getfb{,2}(). A similar issue was reported at: https://lore.kernel.org/all/20211105083308.392156-1-jay.xu@rock-chips.com/ Another problem is that the imported dmabuf might not always have gem_obj->dma_buf set, which would cause leaks in drm_gem_remove_prime_handles(). Let's fix these for now by using handle to find the exact map to remove. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220819072834.17888-1-jeffy.c... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/drm_gem.c | 17 +---------------- drivers/gpu/drm/drm_internal.h | 4 ++-- drivers/gpu/drm/drm_prime.c | 20 ++++++++++++-------- 3 files changed, 15 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 5979af230eda..8b30e8d83fbc 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -166,21 +166,6 @@ void drm_gem_private_object_init(struct drm_device *dev, } EXPORT_SYMBOL(drm_gem_private_object_init); -static void -drm_gem_remove_prime_handles(struct drm_gem_object *obj, struct drm_file *filp) -{ - /* - * Note: obj->dma_buf can't disappear as long as we still hold a - * handle reference in obj->handle_count. - */ - mutex_lock(&filp->prime.lock); - if (obj->dma_buf) { - drm_prime_remove_buf_handle_locked(&filp->prime, - obj->dma_buf); - } - mutex_unlock(&filp->prime.lock); -} - /** * drm_gem_object_handle_free - release resources bound to userspace handles * @obj: GEM object to clean up. @@ -254,7 +239,7 @@ drm_gem_object_release_handle(int id, void *ptr, void *data) else if (dev->driver->gem_close_object) dev->driver->gem_close_object(obj, file_priv); - drm_gem_remove_prime_handles(obj, file_priv); + drm_prime_remove_buf_handle(&file_priv->prime, id); drm_vma_node_revoke(&obj->vma_node, file_priv); drm_gem_object_handle_put_unlocked(obj); diff --git a/drivers/gpu/drm/drm_internal.h b/drivers/gpu/drm/drm_internal.h index b65865c630b0..f80e0f28087d 100644 --- a/drivers/gpu/drm/drm_internal.h +++ b/drivers/gpu/drm/drm_internal.h @@ -86,8 +86,8 @@ int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, void drm_prime_init_file_private(struct drm_prime_file_private *prime_fpriv); void drm_prime_destroy_file_private(struct drm_prime_file_private *prime_fpriv); -void drm_prime_remove_buf_handle_locked(struct drm_prime_file_private *prime_fpriv, - struct dma_buf *dma_buf); +void drm_prime_remove_buf_handle(struct drm_prime_file_private *prime_fpriv, + uint32_t handle); /* drm_drv.c */ struct drm_minor *drm_minor_acquire(unsigned int minor_id); diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 9f955f2010c2..825499ea3ff5 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -187,29 +187,33 @@ static int drm_prime_lookup_buf_handle(struct drm_prime_file_private *prime_fpri return -ENOENT; } -void drm_prime_remove_buf_handle_locked(struct drm_prime_file_private *prime_fpriv, - struct dma_buf *dma_buf) +void drm_prime_remove_buf_handle(struct drm_prime_file_private *prime_fpriv, + uint32_t handle) { struct rb_node *rb; - rb = prime_fpriv->dmabufs.rb_node; + mutex_lock(&prime_fpriv->lock); + + rb = prime_fpriv->handles.rb_node; while (rb) { struct drm_prime_member *member; - member = rb_entry(rb, struct drm_prime_member, dmabuf_rb); - if (member->dma_buf == dma_buf) { + member = rb_entry(rb, struct drm_prime_member, handle_rb); + if (member->handle == handle) { rb_erase(&member->handle_rb, &prime_fpriv->handles); rb_erase(&member->dmabuf_rb, &prime_fpriv->dmabufs); - dma_buf_put(dma_buf); + dma_buf_put(member->dma_buf); kfree(member); - return; - } else if (member->dma_buf < dma_buf) { + break; + } else if (member->handle < handle) { rb = rb->rb_right; } else { rb = rb->rb_left; } } + + mutex_unlock(&prime_fpriv->lock); } void drm_prime_init_file_private(struct drm_prime_file_private *prime_fpriv) -- 2.25.1
From: YiPeng Chai <YiPeng.Chai@amd.com> stable inclusion from stable-v5.10.143 commit c19656cd951a822c0b0f23c91fde08cf313a52ed category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 9d705d7741ae70764f3d6d87e67fad3b5c30ffd0 ] V1: The amdgpu_xgmi_remove_device function will send unload command to psp through psp ring to terminate xgmi, but psp ring has been destroyed in psp_hw_fini. V2: 1. Change the commit title. 2. Restore amdgpu_xgmi_remove_device to its original calling location. Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 3 +++ drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c index 2f47f81a74a5..ae84d3b582aa 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c @@ -2146,6 +2146,9 @@ static int psp_hw_fini(void *handle) psp_rap_terminate(psp); psp_dtm_terminate(psp); psp_hdcp_terminate(psp); + + if (adev->gmc.xgmi.num_physical_nodes > 1) + psp_xgmi_terminate(psp); } psp_asd_unload(psp); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c index 042c85fc528b..def0b7092438 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c @@ -622,7 +622,7 @@ int amdgpu_xgmi_remove_device(struct amdgpu_device *adev) amdgpu_put_xgmi_hive(hive); } - return psp_xgmi_terminate(&adev->psp); + return 0; } int amdgpu_xgmi_ras_late_init(struct amdgpu_device *adev) -- 2.25.1
From: Candice Li <candice.li@amd.com> stable inclusion from stable-v5.10.143 commit 04102568671ee08d9de6a3e70db34cbd5eaa8228 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c351938350ab9b5e978dede2c321da43de7eb70c ] No need to set up rb when no gfx rings. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index c8d1245bfc2b..8ba58b52fa96 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -2574,7 +2574,8 @@ static void gfx_v9_0_constants_init(struct amdgpu_device *adev) gfx_v9_0_tiling_mode_table_init(adev); - gfx_v9_0_setup_rb(adev); + if (adev->gfx.num_gfx_rings) + gfx_v9_0_setup_rb(adev); gfx_v9_0_get_cu_info(adev, &adev->gfx.cu_info); adev->gfx.config.db_debug2 = RREG32_SOC15(GC, 0, mmDB_DEBUG2); -- 2.25.1
From: Zhenneng Li <lizhenneng@kylinos.cn> stable inclusion from stable-v5.10.143 commit 826b46fd5974113515abe9e4fc8178009a8ce18c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit f461950fdc374a3ada5a63c669d997de4600dffe ] Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
Configuration and Message requests are the only TLPs accepted by a Function in the D3hot state. All other received Requests must be handled as Unsupported Requests, and all received Completions may optionally be handled as Unexpected Completions. This issue will happen in following logs: Unable to handle kernel paging request at virtual address 00008800e0008010 CPU 0 kworker/0:3(131): Oops 0 pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W pc is at si_gpu_check_soft_reset+0x3c/0x240 ra is at si_dma_is_lockup+0x34/0xd0 v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000 t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258 t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000 s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018 s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000 s6 = fff00007ef07bd98 a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008 a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338 t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800 t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000 gp = ffffffff81d89690 sp = 00000000aa814126 Disabling lock debugging due to kernel taint Trace: [<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0 [<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290 [<ffffffff80977010>] process_one_work+0x280/0x550 [<ffffffff80977350>] worker_thread+0x70/0x7c0 [<ffffffff80977410>] worker_thread+0x130/0x7c0 [<ffffffff80982040>] kthread+0x200/0x210 [<ffffffff809772e0>] worker_thread+0x0/0x7c0 [<ffffffff80981f8c>] kthread+0x14c/0x210 [<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20 [<ffffffff80981e40>] kthread+0x0/0x210 Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101 <88210000> 4821ed21 So force lockup work queue flush to fix this problem.
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/radeon/radeon_device.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 266e3cbbd09b..8287410f471f 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1623,6 +1623,9 @@ int radeon_suspend_kms(struct drm_device *dev, bool suspend, if (r) { /* delay GPU reset to resume */ radeon_fence_driver_force_completion(rdev, i); + } else { + /* finish executing delayed work */ + flush_delayed_work(&rdev->fence_drv[i].lockup_work); } } -- 2.25.1
From: Li Qiong <liqiong@nfschina.com> stable inclusion from stable-v5.10.143 commit 44739b5aae3a0a8be4c45635617c70d74e3a5687 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d46c742f827fa2326ab1f4faa1cccadb56912341 ] As the possible failure of the kmalloc(), it should be better to fix this error path, check and return '-ENOMEM' error code. Signed-off-by: Li Qiong <liqiong@nfschina.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/parisc/ccio-dma.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index b916fab9b161..ffd5000c23d3 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1380,15 +1380,17 @@ ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr) } } -static void __init ccio_init_resources(struct ioc *ioc) +static int __init ccio_init_resources(struct ioc *ioc) { struct resource *res = ioc->mmio_region; char *name = kmalloc(14, GFP_KERNEL); - + if (unlikely(!name)) + return -ENOMEM; snprintf(name, 14, "GSC Bus [%d/]", ioc->hw_path); ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low); ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv); + return 0; } static int new_ioc_area(struct resource *res, unsigned long size, @@ -1543,7 +1545,10 @@ static int __init ccio_probe(struct parisc_device *dev) return -ENOMEM; } ccio_ioc_init(ioc); - ccio_init_resources(ioc); + if (ccio_init_resources(ioc)) { + kfree(ioc); + return -ENOMEM; + } hppa_dma_ops = &ccio_ops; hba = kzalloc(sizeof(*hba), GFP_KERNEL); -- 2.25.1
From: Helge Deller <deller@gmx.de> stable inclusion from stable-v5.10.143 commit 96d206d0a14ea89bdd896f5d8ed2f29c4f0fee6e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 591d2108f3abc4db9f9073cae37cf3591fd250d6 ] If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x machine is detected. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/parisc/kernel/head.S | 43 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index aa93d775c34d..598d0938449d 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -22,7 +22,7 @@ #include <linux/init.h> #include <linux/pgtable.h> - .level PA_ASM_LEVEL + .level 1.1 __INITDATA ENTRY(boot_args) @@ -69,6 +69,47 @@ $bss_loop: stw,ma %arg2,4(%r1) stw,ma %arg3,4(%r1) +#if !defined(CONFIG_64BIT) && defined(CONFIG_PA20) + /* This 32-bit kernel was compiled for PA2.0 CPUs. Check current CPU + * and halt kernel if we detect a PA1.x CPU. */ + ldi 32,%r10 + mtctl %r10,%cr11 + .level 2.0 + mfctl,w %cr11,%r10 + .level 1.1 + comib,<>,n 0,%r10,$cpu_ok + + load32 PA(msg1),%arg0 + ldi msg1_end-msg1,%arg1 +$iodc_panic: + copy %arg0, %r10 + copy %arg1, %r11 + load32 PA(init_stack),%sp +#define MEM_CONS 0x3A0 + ldw MEM_CONS+32(%r0),%arg0 // HPA + ldi ENTRY_IO_COUT,%arg1 + ldw MEM_CONS+36(%r0),%arg2 // SPA + ldw MEM_CONS+8(%r0),%arg3 // layers + load32 PA(__bss_start),%r1 + stw %r1,-52(%sp) // arg4 + stw %r0,-56(%sp) // arg5 + stw %r10,-60(%sp) // arg6 = ptr to text + stw %r11,-64(%sp) // arg7 = len + stw %r0,-68(%sp) // arg8 + load32 PA(.iodc_panic_ret), %rp + ldw MEM_CONS+40(%r0),%r1 // ENTRY_IODC + bv,n (%r1) +.iodc_panic_ret: + b . /* wait endless with ... */ + or %r10,%r10,%r10 /* qemu idle sleep */ +msg1: .ascii "Can't boot kernel which was built for PA8x00 CPUs on this machine.\r\n" +msg1_end: + +$cpu_ok: +#endif + + .level PA_ASM_LEVEL + /* Initialize startup VM. Just map first 16/32 MB of memory */ load32 PA(swapper_pg_dir),%r4 mtctl %r4,%cr24 /* Initialize kernel root pointer */ -- 2.25.1
From: Sudeep Holla <sudeep.holla@arm.com> stable inclusion from stable-v5.10.143 commit 43b9af72751a98cb9c074b170fc244714aeb59d5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e75d18cecbb3805895d8ed64da4f78575ec96043 ] Though acpi_find_last_cache_level() always returned signed value and the document states it will return any errors caused by lack of a PPTT table, it never returned negative values before. Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage") however changed it by returning -ENOENT if no PPTT was found. The value returned from acpi_find_last_cache_level() is then assigned to unsigned fw_level. It will result in the number of cache leaves calculated incorrectly as a huge value which will then cause the following warning from __alloc_pages as the order would be great than MAX_ORDER because of incorrect and huge cache leaves value. | WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314 | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73 | pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __alloc_pages+0x74/0x314 | lr : alloc_pages+0xe8/0x318 | Call trace: | __alloc_pages+0x74/0x314 | alloc_pages+0xe8/0x318 | kmalloc_order_trace+0x68/0x1dc | __kmalloc+0x240/0x338 | detect_cache_attributes+0xe0/0x56c | update_siblings_masks+0x38/0x284 | store_cpu_topology+0x78/0x84 | smp_prepare_cpus+0x48/0x134 | kernel_init_freeable+0xc4/0x14c | kernel_init+0x2c/0x1b4 | ret_from_fork+0x10/0x20 Fix the same by changing fw_level to be signed integer and return the error from init_cache_level() early in case of error. Reported-and-Tested-by: Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm64/kernel/cacheinfo.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c index 587543c6c51c..97c42be71338 100644 --- a/arch/arm64/kernel/cacheinfo.c +++ b/arch/arm64/kernel/cacheinfo.c @@ -45,7 +45,8 @@ static void ci_leaf_init(struct cacheinfo *this_leaf, int init_cache_level(unsigned int cpu) { - unsigned int ctype, level, leaves, fw_level; + unsigned int ctype, level, leaves; + int fw_level; struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) { @@ -63,6 +64,9 @@ int init_cache_level(unsigned int cpu) else fw_level = acpi_find_last_cache_level(cpu); + if (fw_level < 0) + return fw_level; + if (level < fw_level) { /* * some external caches not specified in CLIDR_EL1 -- 2.25.1
From: lily <floridsleeves@gmail.com> stable inclusion from stable-v5.10.143 commit 9d040a629e7e7965c70e3ff16e1a8180470b8746 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c624c58e08b15105662b9ab9be23d14a6b945a49 ] skb_copy_bits() could fail, which requires a check on the return value. Signed-off-by: Li Zhong <floridsleeves@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/core/skbuff.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 7f0b5e3a5f78..1172b75e86e1 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4063,9 +4063,8 @@ struct sk_buff *skb_segment(struct sk_buff *head_skb, SKB_GSO_CB(nskb)->csum_start = skb_headroom(nskb) + doffset; } else { - skb_copy_bits(head_skb, offset, - skb_put(nskb, len), - len); + if (skb_copy_bits(head_skb, offset, skb_put(nskb, len), len)) + goto err; } continue; } -- 2.25.1
From: Yang Yingliang <yangyingliang@huawei.com> stable inclusion from stable-v5.10.143 commit 2078e326b64e9a5ccb67ccc9ebab9b70a2637613 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 07c55c9803dea748d17a054000cbf1913ce06399 ] Add missing pci_disable_device() in error path in chipsfb_pci_init(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/video/fbdev/chipsfb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c index 393894af26f8..2b00a9d554fc 100644 --- a/drivers/video/fbdev/chipsfb.c +++ b/drivers/video/fbdev/chipsfb.c @@ -430,6 +430,7 @@ static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent) err_release_fb: framebuffer_release(p); err_disable: + pci_disable_device(dp); err_out: return rc; } -- 2.25.1
From: Qu Huang <jinsdb@126.com> stable inclusion from stable-v5.10.143 commit dfb27648eea5a5729b544198c1867887fe9420c6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit b8983d42524f10ac6bf35bbce6a7cc8e45f61e04 ] The mmVM_L2_CNTL3 register is not assigned an initial value Signed-off-by: Qu Huang <jinsdb@126.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c index f84701c562bf..97441f373531 100644 --- a/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c @@ -178,6 +178,7 @@ static void mmhub_v1_0_init_cache_regs(struct amdgpu_device *adev) tmp = REG_SET_FIELD(tmp, VM_L2_CNTL2, INVALIDATE_L2_CACHE, 1); WREG32_SOC15(MMHUB, 0, mmVM_L2_CNTL2, tmp); + tmp = mmVM_L2_CNTL3_DEFAULT; if (adev->gmc.translate_further) { tmp = REG_SET_FIELD(tmp, VM_L2_CNTL3, BANK_SELECT, 12); tmp = REG_SET_FIELD(tmp, VM_L2_CNTL3, -- 2.25.1
From: Tasos Sahanidis <tasos@tasossah.com> stable inclusion from stable-v5.10.143 commit 39a90720f3abe96625d1224e7a7463410875de4c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit d29f59051d3a07b81281b2df2b8c9dfe4716067f upstream. The voice allocator sometimes begins allocating from near the end of the array and then wraps around, however snd_emu10k1_pcm_channel_alloc() accesses the newly allocated voices as if it never wrapped around. This results in out of bounds access if the first voice has a high enough index so that first_voice + requested_voice_count > NUM_G (64). The more voices are requested, the more likely it is for this to occur. This was initially discovered using PipeWire, however it can be reproduced by calling aplay multiple times with 16 channels: aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40 index 65 is out of range for type 'snd_emu10k1_voice [64]' CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7 Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x3f __ubsan_handle_out_of_bounds.cold+0x44/0x49 snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1] snd_pcm_hw_params+0x29f/0x600 [snd_pcm] snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm] ? exit_to_user_mode_prepare+0x35/0x170 ? do_syscall_64+0x69/0x90 ? syscall_exit_to_user_mode+0x26/0x50 ? do_syscall_64+0x69/0x90 ? exit_to_user_mode_prepare+0x35/0x170 snd_pcm_ioctl+0x27/0x40 [snd_pcm] __x64_sys_ioctl+0x95/0xd0 do_syscall_64+0x5c/0x90 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/emu10k1/emupcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/emu10k1/emupcm.c b/sound/pci/emu10k1/emupcm.c index b2ddabb99438..8d2c101d66a2 100644 --- a/sound/pci/emu10k1/emupcm.c +++ b/sound/pci/emu10k1/emupcm.c @@ -123,7 +123,7 @@ static int snd_emu10k1_pcm_channel_alloc(struct snd_emu10k1_pcm * epcm, int voic epcm->voices[0]->epcm = epcm; if (voices > 1) { for (i = 1; i < voices; i++) { - epcm->voices[i] = &epcm->emu->voices[epcm->voices[0]->number + i]; + epcm->voices[i] = &epcm->emu->voices[(epcm->voices[0]->number + i) % NUM_G]; epcm->voices[i]->epcm = epcm; } } -- 2.25.1
From: Pattara Teerapong <pteerapong@chromium.org> stable inclusion from stable-v5.10.143 commit ab730d3c44918f5cb9b2abc1e463cd0b80bfaa94 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 3e48940abee88b8dbbeeaf8a07e7b2b6be1271b3 upstream. In loopback_jiffies_timer_pos_update(), we are getting jiffies twice. First time for playback, second time for capture. Jiffies can be updated between these two calls and if the capture jiffies is larger, extra zeros will be filled in the capture buffer. Change to get jiffies once and use it for both playback and capture. Signed-off-by: Pattara Teerapong <pteerapong@chromium.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220901144036.4049060-1-pteerapong@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/drivers/aloop.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 2c5f7e905ab8..fb45a32d99cd 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -606,17 +606,18 @@ static unsigned int loopback_jiffies_timer_pos_update cable->streams[SNDRV_PCM_STREAM_PLAYBACK]; struct loopback_pcm *dpcm_capt = cable->streams[SNDRV_PCM_STREAM_CAPTURE]; - unsigned long delta_play = 0, delta_capt = 0; + unsigned long delta_play = 0, delta_capt = 0, cur_jiffies; unsigned int running, count1, count2; + cur_jiffies = jiffies; running = cable->running ^ cable->pause; if (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) { - delta_play = jiffies - dpcm_play->last_jiffies; + delta_play = cur_jiffies - dpcm_play->last_jiffies; dpcm_play->last_jiffies += delta_play; } if (running & (1 << SNDRV_PCM_STREAM_CAPTURE)) { - delta_capt = jiffies - dpcm_capt->last_jiffies; + delta_capt = cur_jiffies - dpcm_capt->last_jiffies; dpcm_capt->last_jiffies += delta_capt; } -- 2.25.1
From: Dongxiang Ke <kdx.glider@gmail.com> stable inclusion from stable-v5.10.143 commit 6123bec8480d23369e2ee0b2208611619f269faf category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit e53f47f6c1a56d2af728909f1cb894da6b43d9bf upstream. There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces. Signed-off-by: Dongxiang Ke <kdx.glider@gmail.com> Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/usb/stream.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/stream.c b/sound/usb/stream.c index 2f6d39c2ba7c..7711184a0d0b 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -1106,7 +1106,7 @@ static int __snd_usb_parse_audio_interface(struct snd_usb_audio *chip, * Dallas DS4201 workaround: It presents 5 altsettings, but the last * one misses syncpipe, and does not produce any sound. */ - if (chip->usb_id == USB_ID(0x04fa, 0x4201)) + if (chip->usb_id == USB_ID(0x04fa, 0x4201) && num >= 4) num = 4; for (i = 0; i < num; i++) { -- 2.25.1
From: "Christian A. Ehrhardt" <lk@c--e.de> stable inclusion from stable-v5.10.143 commit ab60010225cebf792c9927d20ffeefcf3d3d1c73 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 1efda38d6f9ba26ac88b359c6277f1172db03f1e upstream. The system call gate area counts as kernel text but trying to install a kprobe in this area fails with an Oops later on. To fix this explicitly disallow the gate area for kprobes. Found by syzkaller with the following reproducer: perf_event_open$cgroup(&(0x7f00000001c0)={0x6, 0x80, 0x0, 0x0, 0x0, 0x0, 0x80ffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext={0x0, 0xffffffffff600000}}, 0xffffffffffffffff, 0x0, 0xffffffffffffffff, 0x0) Sample report: BUG: unable to handle page fault for address: fffffbfff3ac6000 PGD 6dfcb067 P4D 6dfcb067 PUD 6df8f067 PMD 6de4d067 PTE 0 Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 21978 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b-dirty #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline] RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline] RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134 Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89 RSP: 0018:ffffc900088bf860 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000 RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8 RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000 FS: 00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> insn_get_prefixes arch/x86/lib/insn.c:131 [inline] insn_get_opcode arch/x86/lib/insn.c:272 [inline] insn_get_modrm+0x64a/0x7b0 arch/x86/lib/insn.c:343 insn_get_sib+0x29a/0x330 arch/x86/lib/insn.c:421 insn_get_displacement+0x350/0x6b0 arch/x86/lib/insn.c:464 insn_get_immediate arch/x86/lib/insn.c:632 [inline] insn_get_length arch/x86/lib/insn.c:707 [inline] insn_decode+0x43a/0x490 arch/x86/lib/insn.c:747 can_probe+0xfc/0x1d0 arch/x86/kernel/kprobes/core.c:282 arch_prepare_kprobe+0x79/0x1c0 arch/x86/kernel/kprobes/core.c:739 prepare_kprobe kernel/kprobes.c:1160 [inline] register_kprobe kernel/kprobes.c:1641 [inline] register_kprobe+0xb6e/0x1690 kernel/kprobes.c:1603 __register_trace_kprobe kernel/trace/trace_kprobe.c:509 [inline] __register_trace_kprobe+0x26a/0x2d0 kernel/trace/trace_kprobe.c:477 create_local_trace_kprobe+0x1f7/0x350 kernel/trace/trace_kprobe.c:1833 perf_kprobe_init+0x18c/0x280 kernel/trace/trace_event_perf.c:271 perf_kprobe_event_init+0xf8/0x1c0 kernel/events/core.c:9888 perf_try_init_event+0x12d/0x570 kernel/events/core.c:11261 perf_init_event kernel/events/core.c:11325 [inline] perf_event_alloc.part.0+0xf7f/0x36a0 kernel/events/core.c:11619 perf_event_alloc kernel/events/core.c:12059 [inline] __do_sys_perf_event_open+0x4a8/0x2a00 kernel/events/core.c:12157 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f63ef7efaed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f63eef63028 EFLAGS: 00000246 ORIG_RAX: 000000000000012a RAX: ffffffffffffffda RBX: 00007f63ef90ff80 RCX: 00007f63ef7efaed RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 00000000200001c0 RBP: 00007f63ef86019c R08: 0000000000000000 R09: 0000000000000000 R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000002 R14: 00007f63ef90ff80 R15: 00007f63eef43000 </TASK> Modules linked in: CR2: fffffbfff3ac6000 ---[ end trace 0000000000000000 ]--- RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline] RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline] RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134 Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89 RSP: 0018:ffffc900088bf860 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000 RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8 RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000 FS: 00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0 PKRU: 55555554 ================================================================== Link: https://lkml.kernel.org/r/20220907200917.654103-1-lk@c--e.de cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- kernel/kprobes.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 0990b9a5e47c..6d5f26b8f6ce 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -1642,6 +1642,7 @@ static int check_kprobe_address_safe(struct kprobe *p, /* Ensure it is not in reserved area nor out of text */ if (!(core_kernel_text((unsigned long) p->addr) || is_module_text_address((unsigned long) p->addr)) || + in_gate_area_no_mm((unsigned long) p->addr) || within_kprobe_blacklist((unsigned long) p->addr) || jump_label_text_reserved(p->addr, p->addr) || static_call_text_reserved(p->addr, p->addr) || -- 2.25.1
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> stable inclusion from stable-v5.10.143 commit 68f22c80c18186f3dba9b2b60bd05488987ae7ce category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit dec9b2f1e0455a151a7293c367da22ab973f713e upstream. There is a very common pattern of using debugfs_remove(debufs_lookup(..)) which results in a dentry leak of the dentry that was looked up. Instead of having to open-code the correct pattern of calling dput() on the dentry, create debugfs_lookup_and_remove() to handle this pattern automatically and properly without any memory leaks. Cc: stable <stable@kernel.org> Reported-by: Kuyo Chang <kuyo.chang@mediatek.com> Tested-by: Kuyo Chang <kuyo.chang@mediatek.com> Link: https://lore.kernel.org/r/YxIaQ8cSinDR881k@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/debugfs/inode.c | 22 ++++++++++++++++++++++ include/linux/debugfs.h | 6 ++++++ 2 files changed, 28 insertions(+) diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index c48d5b844aaa..8e0ef58954b9 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -733,6 +733,28 @@ void debugfs_remove(struct dentry *dentry) } EXPORT_SYMBOL_GPL(debugfs_remove); +/** + * debugfs_lookup_and_remove - lookup a directory or file and recursively remove it + * @name: a pointer to a string containing the name of the item to look up. + * @parent: a pointer to the parent dentry of the item. + * + * This is the equlivant of doing something like + * debugfs_remove(debugfs_lookup(..)) but with the proper reference counting + * handled for the directory being looked up. + */ +void debugfs_lookup_and_remove(const char *name, struct dentry *parent) +{ + struct dentry *dentry; + + dentry = debugfs_lookup(name, parent); + if (!dentry) + return; + + debugfs_remove(dentry); + dput(dentry); +} +EXPORT_SYMBOL_GPL(debugfs_lookup_and_remove); + /** * debugfs_rename - rename a file/directory in the debugfs filesystem * @old_dir: a pointer to the parent dentry for the renamed object. This diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index d6c4cc9ecc77..2357109a8901 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -91,6 +91,8 @@ struct dentry *debugfs_create_automount(const char *name, void debugfs_remove(struct dentry *dentry); #define debugfs_remove_recursive debugfs_remove +void debugfs_lookup_and_remove(const char *name, struct dentry *parent); + const struct file_operations *debugfs_real_fops(const struct file *filp); int debugfs_file_get(struct dentry *dentry); @@ -220,6 +222,10 @@ static inline void debugfs_remove(struct dentry *dentry) static inline void debugfs_remove_recursive(struct dentry *dentry) { } +static inline void debugfs_lookup_and_remove(const char *name, + struct dentry *parent) +{ } + const struct file_operations *debugfs_real_fops(const struct file *filp); static inline int debugfs_file_get(struct dentry *dentry) -- 2.25.1
From: Bart Van Assche <bvanassche@acm.org> stable inclusion from stable-v5.10.143 commit be01f1c988757b95f11f090a9f491365670a522b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 6a02a61e81c231cc5c680c5dbf8665275147ac52 upstream. Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30 Cc: stable@vger.kernel.org Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/nvme/target/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index 9a8fa2e582d5..bc88ff2912f5 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -730,6 +730,8 @@ static void nvmet_set_error(struct nvmet_req *req, u16 status) static void __nvmet_req_complete(struct nvmet_req *req, u16 status) { + struct nvmet_ns *ns = req->ns; + if (!req->sq->sqhd_disabled) nvmet_update_sq_head(req); req->cqe->sq_id = cpu_to_le16(req->sq->qid); @@ -740,9 +742,9 @@ static void __nvmet_req_complete(struct nvmet_req *req, u16 status) trace_nvmet_req_complete(req); - if (req->ns) - nvmet_put_namespace(req->ns); req->ops->queue_response(req); + if (ns) + nvmet_put_namespace(ns); } void nvmet_req_complete(struct nvmet_req *req, u16 status) -- 2.25.1
From: Ville Syrjälä <ville.syrjala@linux.intel.com> stable inclusion from stable-v5.10.143 commit de572edecc2965b924a3f75b2f09017a3ea07ca9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 672d6ca758651f0ec12cd0d59787067a5bde1c96 upstream. A lot of modern laptops use the Parade PS8461E MUX for eDP switching. The MUX can operate in jitter cleaning mode or redriver mode, the first one resulting in higher link quality. The jitter cleaning mode needs to know the link rate used and the MUX achieves this by snooping the LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES DPCD accesses. When the MUX is powered down (seems this can happen whenever the display is turned off) it loses track of the snooped link rates so when we do the LINK_RATE_SELECT write it no longer knowns which link rate we're selecting, and thus it falls back to the lower quality redriver mode. This results in unstable high link rates (eg. usually 8.1Gbps link rate no longer works correctly). In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES from the sink at the start of every link training. Unfortunately we don't have a way to detect the presence of the MUX. It looks like the set of laptops equipped with this MUX is fairly large and contains devices from multiple manufacturers. It may also still be growing with new models. So a quirk doesn't seem like a very easily maintainable option, thus we shall attempt to do this unconditionally on all machines that use LINK_RATE_SELECT. Hopefully this extra DPCD read doesn't cause issues for any unaffected machine. If that turns out to be the case we'll need to convert this into a quirk in the future. Cc: stable@vger.kernel.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.s... Tested-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 25899c590cb5ba9b9f284c6ca8e7e9086793d641) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- .../drm/i915/display/intel_dp_link_training.c | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c index f2c8b56be9ea..261a5e97a0b4 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c @@ -163,6 +163,28 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp) intel_dp_compute_rate(intel_dp, intel_dp->link_rate, &link_bw, &rate_select); + /* + * WaEdpLinkRateDataReload + * + * Parade PS8461E MUX (used on varius TGL+ laptops) needs + * to snoop the link rates reported by the sink when we + * use LINK_RATE_SET in order to operate in jitter cleaning + * mode (as opposed to redriver mode). Unfortunately it + * loses track of the snooped link rates when powered down, + * so we need to make it re-snoop often. Without this high + * link rates are not stable. + */ + if (!link_bw) { + struct intel_connector *connector = intel_dp->attached_connector; + __le16 sink_rates[DP_MAX_SUPPORTED_RATES]; + + drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] Reloading eDP link rates\n", + connector->base.base.id, connector->base.name); + + drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES, + sink_rates, sizeof(sink_rates)); + } + if (link_bw) drm_dbg_kms(&i915->drm, "Using LINK_BW_SET value %02x\n", link_bw); -- 2.25.1
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> stable inclusion from stable-v5.10.143 commit ea10a652ad2ae2cf3eced6f632a5c98f26727057 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 991df3dd5144f2e6b1c38b8d20ed3d4d21e20b34 upstream. Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 6742cbbf7002..2a58674275d4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3501,6 +3501,7 @@ static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc) fw_event = list_first_entry(&ioc->fw_event_list, struct fw_event_work, list); list_del_init(&fw_event->list); + fw_event_work_put(fw_event); } spin_unlock_irqrestore(&ioc->fw_event_lock, flags); @@ -3559,7 +3560,6 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc) if (cancel_work_sync(&fw_event->work)) fw_event_work_put(fw_event); - fw_event_work_put(fw_event); } ioc->fw_events_cleanup = 0; } -- 2.25.1
From: Yang Yingliang <yangyingliang@huawei.com> stable inclusion from stable-v5.10.143 commit a5620d3e0cf93d58d1a98a8f1e5fb8f140d07da8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit da6d507f5ff328f346b3c50e19e19993027b8ffd upstream. Add the missing destroy_workqueue() before return from lpfc_sli4_driver_resource_setup() in the error path. Link: https://lore.kernel.org/r/20220823044237.285643-1-yangyingliang@huawei.com Fixes: 3cee98db2610 ("scsi: lpfc: Fix crash on driver unload in wq free") Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/scsi/lpfc/lpfc_init.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 134e4ee5dc48..17200b453cbb 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -6670,7 +6670,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) /* Allocate device driver memory */ rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ); if (rc) - return -ENOMEM; + goto out_destroy_workqueue; /* IF Type 2 ports get initialized now. */ if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >= @@ -7076,6 +7076,9 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) lpfc_destroy_bootstrap_mbox(phba); out_free_mem: lpfc_mem_free(phba); +out_destroy_workqueue: + destroy_workqueue(phba->wq); + phba->wq = NULL; return rc; } -- 2.25.1
From: Enzo Matsumiya <ematsumiya@suse.de> stable inclusion from stable-v5.10.143 commit 98127f140bc4db0d19e6e32ed44ed09008a27df0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 400d0ad63b190895e29f43bc75b1260111d3fd34 ] SMB2_ioctl() is always called with is_fsctl = true, so doesn't make any sense to have it at all. Thus, always set SMB2_0_IOCTL_IS_FSCTL flag on the request. Also, as per MS-SMB2 3.3.5.15 "Receiving an SMB2 IOCTL Request", servers must fail the request if the request flags is zero anyway. Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Reviewed-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/cifs/smb2file.c | 1 - fs/cifs/smb2ops.c | 35 +++++++++++++---------------------- fs/cifs/smb2pdu.c | 20 +++++++++----------- fs/cifs/smb2proto.h | 4 ++-- 4 files changed, 24 insertions(+), 36 deletions(-) diff --git a/fs/cifs/smb2file.c b/fs/cifs/smb2file.c index 2fa3ba354cc9..001c26daacba 100644 --- a/fs/cifs/smb2file.c +++ b/fs/cifs/smb2file.c @@ -74,7 +74,6 @@ smb2_open_file(const unsigned int xid, struct cifs_open_parms *oparms, nr_ioctl_req.Reserved = 0; rc = SMB2_ioctl(xid, oparms->tcon, fid->persistent_fid, fid->volatile_fid, FSCTL_LMR_REQUEST_RESILIENCY, - true /* is_fsctl */, (char *)&nr_ioctl_req, sizeof(nr_ioctl_req), CIFSMaxBufSize, NULL, NULL /* no return info */); if (rc == -EOPNOTSUPP) { diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index b6d72e3c5eba..0a20ae96fe24 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -587,7 +587,7 @@ SMB3_request_interfaces(const unsigned int xid, struct cifs_tcon *tcon) struct cifs_ses *ses = tcon->ses; rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID, - FSCTL_QUERY_NETWORK_INTERFACE_INFO, true /* is_fsctl */, + FSCTL_QUERY_NETWORK_INTERFACE_INFO, NULL /* no data input */, 0 /* no data input */, CIFSMaxBufSize, (char **)&out_buf, &ret_data_len); if (rc == -EOPNOTSUPP) { @@ -1470,9 +1470,8 @@ SMB2_request_res_key(const unsigned int xid, struct cifs_tcon *tcon, struct resume_key_req *res_key; rc = SMB2_ioctl(xid, tcon, persistent_fid, volatile_fid, - FSCTL_SRV_REQUEST_RESUME_KEY, true /* is_fsctl */, - NULL, 0 /* no input */, CIFSMaxBufSize, - (char **)&res_key, &ret_data_len); + FSCTL_SRV_REQUEST_RESUME_KEY, NULL, 0 /* no input */, + CIFSMaxBufSize, (char **)&res_key, &ret_data_len); if (rc) { cifs_tcon_dbg(VFS, "refcpy ioctl error %d getting resume key\n", rc); @@ -1611,7 +1610,7 @@ smb2_ioctl_query_info(const unsigned int xid, rqst[1].rq_nvec = SMB2_IOCTL_IOV_SIZE; rc = SMB2_ioctl_init(tcon, server, &rqst[1], COMPOUND_FID, COMPOUND_FID, - qi.info_type, true, buffer, qi.output_buffer_length, + qi.info_type, buffer, qi.output_buffer_length, CIFSMaxBufSize - MAX_SMB2_CREATE_RESPONSE_SIZE - MAX_SMB2_CLOSE_RESPONSE_SIZE); free_req1_func = SMB2_ioctl_free; @@ -1787,9 +1786,8 @@ smb2_copychunk_range(const unsigned int xid, retbuf = NULL; rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid, trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE, - true /* is_fsctl */, (char *)pcchunk, - sizeof(struct copychunk_ioctl), CIFSMaxBufSize, - (char **)&retbuf, &ret_data_len); + (char *)pcchunk, sizeof(struct copychunk_ioctl), + CIFSMaxBufSize, (char **)&retbuf, &ret_data_len); if (rc == 0) { if (ret_data_len != sizeof(struct copychunk_ioctl_rsp)) { @@ -1949,7 +1947,6 @@ static bool smb2_set_sparse(const unsigned int xid, struct cifs_tcon *tcon, rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid, cfile->fid.volatile_fid, FSCTL_SET_SPARSE, - true /* is_fctl */, &setsparse, 1, CIFSMaxBufSize, NULL, NULL); if (rc) { tcon->broken_sparse_sup = true; @@ -2032,7 +2029,6 @@ smb2_duplicate_extents(const unsigned int xid, rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid, trgtfile->fid.volatile_fid, FSCTL_DUPLICATE_EXTENTS_TO_FILE, - true /* is_fsctl */, (char *)&dup_ext_buf, sizeof(struct duplicate_extents_to_file), CIFSMaxBufSize, NULL, @@ -2067,7 +2063,6 @@ smb3_set_integrity(const unsigned int xid, struct cifs_tcon *tcon, return SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid, cfile->fid.volatile_fid, FSCTL_SET_INTEGRITY_INFORMATION, - true /* is_fsctl */, (char *)&integr_info, sizeof(struct fsctl_set_integrity_information_req), CIFSMaxBufSize, NULL, @@ -2120,7 +2115,6 @@ smb3_enum_snapshots(const unsigned int xid, struct cifs_tcon *tcon, rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid, cfile->fid.volatile_fid, FSCTL_SRV_ENUMERATE_SNAPSHOTS, - true /* is_fsctl */, NULL, 0 /* no input data */, max_response_size, (char **)&retbuf, &ret_data_len); @@ -2762,7 +2756,6 @@ smb2_get_dfs_refer(const unsigned int xid, struct cifs_ses *ses, do { rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID, FSCTL_DFS_GET_REFERRALS, - true /* is_fsctl */, (char *)dfs_req, dfs_req_size, CIFSMaxBufSize, (char **)&dfs_rsp, &dfs_rsp_size); } while (rc == -EAGAIN); @@ -2964,8 +2957,7 @@ smb2_query_symlink(const unsigned int xid, struct cifs_tcon *tcon, rc = SMB2_ioctl_init(tcon, server, &rqst[1], fid.persistent_fid, - fid.volatile_fid, FSCTL_GET_REPARSE_POINT, - true /* is_fctl */, NULL, 0, + fid.volatile_fid, FSCTL_GET_REPARSE_POINT, NULL, 0, CIFSMaxBufSize - MAX_SMB2_CREATE_RESPONSE_SIZE - MAX_SMB2_CLOSE_RESPONSE_SIZE); @@ -3145,8 +3137,7 @@ smb2_query_reparse_tag(const unsigned int xid, struct cifs_tcon *tcon, rc = SMB2_ioctl_init(tcon, server, &rqst[1], COMPOUND_FID, - COMPOUND_FID, FSCTL_GET_REPARSE_POINT, - true /* is_fctl */, NULL, 0, + COMPOUND_FID, FSCTL_GET_REPARSE_POINT, NULL, 0, CIFSMaxBufSize - MAX_SMB2_CREATE_RESPONSE_SIZE - MAX_SMB2_CLOSE_RESPONSE_SIZE); @@ -3409,7 +3400,7 @@ static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon, fsctl_buf.BeyondFinalZero = cpu_to_le64(offset + len); rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid, - cfile->fid.volatile_fid, FSCTL_SET_ZERO_DATA, true, + cfile->fid.volatile_fid, FSCTL_SET_ZERO_DATA, (char *)&fsctl_buf, sizeof(struct file_zero_data_information), 0, NULL, NULL); @@ -3471,7 +3462,7 @@ static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon, rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid, cfile->fid.volatile_fid, FSCTL_SET_ZERO_DATA, - true /* is_fctl */, (char *)&fsctl_buf, + (char *)&fsctl_buf, sizeof(struct file_zero_data_information), CIFSMaxBufSize, NULL, NULL); free_xid(xid); @@ -3530,7 +3521,7 @@ static int smb3_simple_fallocate_range(unsigned int xid, in_data.length = cpu_to_le64(len); rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid, cfile->fid.volatile_fid, - FSCTL_QUERY_ALLOCATED_RANGES, true, + FSCTL_QUERY_ALLOCATED_RANGES, (char *)&in_data, sizeof(in_data), 1024 * sizeof(struct file_allocated_range_buffer), (char **)&out_data, &out_data_len); @@ -3771,7 +3762,7 @@ static loff_t smb3_llseek(struct file *file, struct cifs_tcon *tcon, loff_t offs rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid, cfile->fid.volatile_fid, - FSCTL_QUERY_ALLOCATED_RANGES, true, + FSCTL_QUERY_ALLOCATED_RANGES, (char *)&in_data, sizeof(in_data), sizeof(struct file_allocated_range_buffer), (char **)&out_data, &out_data_len); @@ -3831,7 +3822,7 @@ static int smb3_fiemap(struct cifs_tcon *tcon, rc = SMB2_ioctl(xid, tcon, cfile->fid.persistent_fid, cfile->fid.volatile_fid, - FSCTL_QUERY_ALLOCATED_RANGES, true, + FSCTL_QUERY_ALLOCATED_RANGES, (char *)&in_data, sizeof(in_data), 1024 * sizeof(struct file_allocated_range_buffer), (char **)&out_data, &out_data_len); diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 24dd711fa9b9..7ee8abd1f79b 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1081,7 +1081,7 @@ int smb3_validate_negotiate(const unsigned int xid, struct cifs_tcon *tcon) } rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID, - FSCTL_VALIDATE_NEGOTIATE_INFO, true /* is_fsctl */, + FSCTL_VALIDATE_NEGOTIATE_INFO, (char *)pneg_inbuf, inbuflen, CIFSMaxBufSize, (char **)&pneg_rsp, &rsplen); if (rc == -EOPNOTSUPP) { @@ -2922,7 +2922,7 @@ int SMB2_ioctl_init(struct cifs_tcon *tcon, struct TCP_Server_Info *server, struct smb_rqst *rqst, u64 persistent_fid, u64 volatile_fid, u32 opcode, - bool is_fsctl, char *in_data, u32 indatalen, + char *in_data, u32 indatalen, __u32 max_response_size) { struct smb2_ioctl_req *req; @@ -2997,10 +2997,8 @@ SMB2_ioctl_init(struct cifs_tcon *tcon, struct TCP_Server_Info *server, req->sync_hdr.CreditCharge = cpu_to_le16(DIV_ROUND_UP(max(indatalen, max_response_size), SMB2_MAX_BUFFER_SIZE)); - if (is_fsctl) - req->Flags = cpu_to_le32(SMB2_0_IOCTL_IS_FSCTL); - else - req->Flags = 0; + /* always an FSCTL (for now) */ + req->Flags = cpu_to_le32(SMB2_0_IOCTL_IS_FSCTL); /* validate negotiate request must be signed - see MS-SMB2 3.2.5.5 */ if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO) @@ -3027,9 +3025,9 @@ SMB2_ioctl_free(struct smb_rqst *rqst) */ int SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, - u64 volatile_fid, u32 opcode, bool is_fsctl, - char *in_data, u32 indatalen, u32 max_out_data_len, - char **out_data, u32 *plen /* returned data len */) + u64 volatile_fid, u32 opcode, char *in_data, u32 indatalen, + u32 max_out_data_len, char **out_data, + u32 *plen /* returned data len */) { struct smb_rqst rqst; struct smb2_ioctl_rsp *rsp = NULL; @@ -3071,7 +3069,7 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, rc = SMB2_ioctl_init(tcon, server, &rqst, persistent_fid, volatile_fid, opcode, - is_fsctl, in_data, indatalen, max_out_data_len); + in_data, indatalen, max_out_data_len); if (rc) goto ioctl_exit; @@ -3153,7 +3151,7 @@ SMB2_set_compression(const unsigned int xid, struct cifs_tcon *tcon, cpu_to_le16(COMPRESSION_FORMAT_DEFAULT); rc = SMB2_ioctl(xid, tcon, persistent_fid, volatile_fid, - FSCTL_SET_COMPRESSION, true /* is_fsctl */, + FSCTL_SET_COMPRESSION, (char *)&fsctl_input /* data input */, 2 /* in data len */, CIFSMaxBufSize /* max out data */, &ret_data /* out data */, NULL); diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h index 4eb0ca84355a..ed2b4fb012a4 100644 --- a/fs/cifs/smb2proto.h +++ b/fs/cifs/smb2proto.h @@ -155,13 +155,13 @@ extern int SMB2_open_init(struct cifs_tcon *tcon, extern void SMB2_open_free(struct smb_rqst *rqst); extern int SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid, u32 opcode, - bool is_fsctl, char *in_data, u32 indatalen, u32 maxoutlen, + char *in_data, u32 indatalen, u32 maxoutlen, char **out_data, u32 *plen /* returned data len */); extern int SMB2_ioctl_init(struct cifs_tcon *tcon, struct TCP_Server_Info *server, struct smb_rqst *rqst, u64 persistent_fid, u64 volatile_fid, u32 opcode, - bool is_fsctl, char *in_data, u32 indatalen, + char *in_data, u32 indatalen, __u32 max_response_size); extern void SMB2_ioctl_free(struct smb_rqst *rqst); extern int SMB2_change_notify(const unsigned int xid, struct cifs_tcon *tcon, -- 2.25.1
From: David Howells <dhowells@redhat.com> stable inclusion from stable-v5.10.143 commit 015c2ec053f3a3f0f24c6cba165edb8a9506400d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit ba0803050d610d5072666be727bca5e03e55b242 ] smb3 fallocate punch hole was not grabbing the inode or filemap_invalidate locks so could have race with pagemap reinstantiating the page. Cc: stable@vger.kernel.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/cifs/smb2ops.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 0a20ae96fe24..11efd5289ec4 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -3430,7 +3430,7 @@ static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon, static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon, loff_t offset, loff_t len) { - struct inode *inode; + struct inode *inode = file_inode(file); struct cifsFileInfo *cfile = file->private_data; struct file_zero_data_information fsctl_buf; long rc; @@ -3439,14 +3439,12 @@ static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon, xid = get_xid(); - inode = d_inode(cfile->dentry); - + inode_lock(inode); /* Need to make file sparse, if not already, before freeing range. */ /* Consider adding equivalent for compressed since it could also work */ if (!smb2_set_sparse(xid, tcon, cfile, inode, set_sparse)) { rc = -EOPNOTSUPP; - free_xid(xid); - return rc; + goto out; } /* @@ -3465,6 +3463,8 @@ static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon, (char *)&fsctl_buf, sizeof(struct file_zero_data_information), CIFSMaxBufSize, NULL, NULL); +out: + inode_unlock(inode); free_xid(xid); return rc; } -- 2.25.1
From: Marco Felsch <m.felsch@pengutronix.de> stable inclusion from stable-v5.10.143 commit bb4bee3eca783107101f5f3f55bbb35f14e6be39 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 204f67d86f55dd4fa757ed04757d7273f71a169c ] The regulator node 'regulator-3p3v-s0' was dupplicated. Remove it to clean the DTS. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 92f9977d1482..e9a4115124eb 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -51,16 +51,6 @@ reg_3p3v_s0: regulator-3p3v-s0 { vin-supply = <®_3p3v_s5>; }; - reg_3p3v_s0: regulator-3p3v-s0 { - compatible = "regulator-fixed"; - regulator-name = "V_3V3_S0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_3p3v_s5>; - }; - reg_3p3v_s5: regulator-3p3v-s5 { compatible = "regulator-fixed"; regulator-name = "V_3V3_S5"; -- 2.25.1
From: Andrew Halaney <ahalaney@redhat.com> stable inclusion from stable-v5.10.143 commit 75c961d01199d8f6d88cb81809f6f5bcbdf19409 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c32f1ebfd26bece77141257864ed7b4720da1557 ] If regulator_enable() fails, enable_count is incremented still. A consumer, assuming no matching regulator_disable() is necessary on failure, will then get this error message upon regulator_put() since enable_count is non-zero: [ 1.277418] WARNING: CPU: 3 PID: 1 at drivers/regulator/core.c:2304 _regulator_put.part.0+0x168/0x170 The consumer could try to fix this in their driver by cleaning up on error from regulator_enable() (i.e. call regulator_disable()), but that results in the following since regulator_enable() failed and didn't increment user_count: [ 1.258112] unbalanced disables for vreg_l17c [ 1.262606] WARNING: CPU: 4 PID: 1 at drivers/regulator/core.c:2899 _regulator_disable+0xd4/0x190 Fix this by decrementing enable_count upon failure to enable. With this in place, just the reason for failure to enable is printed as expected and developers can focus on the root cause of their issue instead of thinking their usage of the regulator consumer api is incorrect. For example, in my case: [ 1.240426] vreg_l17c: invalid input voltage found Fixes: 5451781dadf8 ("regulator: core: Only count load for enabled consumers") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/r/20220819194336.382740-1-ahalaney@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/regulator/core.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 2c5b23aabdad..007ce4af47ff 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2598,13 +2598,18 @@ static int _regulator_do_enable(struct regulator_dev *rdev) */ static int _regulator_handle_consumer_enable(struct regulator *regulator) { + int ret; struct regulator_dev *rdev = regulator->rdev; lockdep_assert_held_once(&rdev->mutex.base); regulator->enable_count++; - if (regulator->uA_load && regulator->enable_count == 1) - return drms_uA_update(rdev); + if (regulator->uA_load && regulator->enable_count == 1) { + ret = drms_uA_update(rdev); + if (ret) + regulator->enable_count--; + return ret; + } return 0; } -- 2.25.1
From: Jens Wiklander <jens.wiklander@linaro.org> stable inclusion from stable-v5.10.143 commit 465eecd2b3a40c488eca5f183add705cd827921e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit eccd7439709810127563e7e3e49b8b44c7b2791d ] Include <linux/uaccess.h> to avoid the warning: drivers/tee/tee_shm.c: In function 'tee_shm_register':
drivers/tee/tee_shm.c:242:14: error: implicit declaration of function 'access_ok' [-Werror=implicit-function-declaration] 242 | if (!access_ok((void __user *)addr, length)) | ^~~~~~~~~ cc1: some warnings being treated as errors
Fixes: 573ae4f13f63 ("tee: add overflow check in register_shm_helper()") Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tee/tee_shm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c index 499fccba3d74..6fb4400333fb 100644 --- a/drivers/tee/tee_shm.c +++ b/drivers/tee/tee_shm.c @@ -9,6 +9,7 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/tee_drv.h> +#include <linux/uaccess.h> #include <linux/uio.h> #include "tee_private.h" -- 2.25.1
From: Michael Guralnik <michaelgur@nvidia.com> stable inclusion from stable-v5.10.143 commit e9ea271c2e43af02c9d9c876519c078b09beeb5c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 27cfde795a96aef1e859a5480489944b95421e46 ] Fix the order of source and destination addresses when resolving the route between server and client to validate use of correct net device. The reverse order we had so far didn't actually validate the net device as the server would try to resolve the route to itself, thus always getting the server's net device. The issue was discovered when running cm applications on a single host between 2 interfaces with same subnet and source based routing rules. When resolving the reverse route the source based route rules were ignored. Fixes: f887f2ac87c2 ("IB/cma: Validate routing of incoming requests") Link: https://lore.kernel.org/r/1c1ec2277a131d277ebcceec987fd338d35b775f.166125187... Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/infiniband/core/cma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 3c40aa50cd60..b5fa19a033c0 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1722,8 +1722,8 @@ cma_ib_id_from_event(struct ib_cm_id *cm_id, } if (!validate_net_dev(*net_dev, - (struct sockaddr *)&req->listen_addr_storage, - (struct sockaddr *)&req->src_addr_storage)) { + (struct sockaddr *)&req->src_addr_storage, + (struct sockaddr *)&req->listen_addr_storage)) { id_priv = ERR_PTR(-EHOSTUNREACH); goto err; } -- 2.25.1
From: Liang He <windhl@126.com> stable inclusion from stable-v5.10.143 commit 6dc0251638a4a1a998506dbd4627f8317e907558 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1085f5080647f0c9f357c270a537869191f7f2a1 ] In brcmstb_pm_probe(), there are two kinds of leak bugs: (1) we need to add of_node_put() when for_each__matching_node() breaks (2) we need to add iounmap() for each iomap in fail path Fixes: 0b741b8234c8 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220707015620.306468-1-windhl@126.com Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/soc/bcm/brcmstb/pm/pm-arm.c | 50 ++++++++++++++++++++++------- 1 file changed, 39 insertions(+), 11 deletions(-) diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c index c6ec7d95bcfc..722fd54e537c 100644 --- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c +++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c @@ -681,13 +681,14 @@ static int brcmstb_pm_probe(struct platform_device *pdev) const struct of_device_id *of_id = NULL; struct device_node *dn; void __iomem *base; - int ret, i; + int ret, i, s; /* AON ctrl registers */ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL); if (IS_ERR(base)) { pr_err("error mapping AON_CTRL\n"); - return PTR_ERR(base); + ret = PTR_ERR(base); + goto aon_err; } ctrl.aon_ctrl_base = base; @@ -697,8 +698,10 @@ static int brcmstb_pm_probe(struct platform_device *pdev) /* Assume standard offset */ ctrl.aon_sram = ctrl.aon_ctrl_base + AON_CTRL_SYSTEM_DATA_RAM_OFS; + s = 0; } else { ctrl.aon_sram = base; + s = 1; } writel_relaxed(0, ctrl.aon_sram + AON_REG_PANIC); @@ -708,7 +711,8 @@ static int brcmstb_pm_probe(struct platform_device *pdev) (const void **)&ddr_phy_data); if (IS_ERR(base)) { pr_err("error mapping DDR PHY\n"); - return PTR_ERR(base); + ret = PTR_ERR(base); + goto ddr_phy_err; } ctrl.support_warm_boot = ddr_phy_data->supports_warm_boot; ctrl.pll_status_offset = ddr_phy_data->pll_status_offset; @@ -728,17 +732,20 @@ static int brcmstb_pm_probe(struct platform_device *pdev) for_each_matching_node(dn, ddr_shimphy_dt_ids) { i = ctrl.num_memc; if (i >= MAX_NUM_MEMC) { + of_node_put(dn); pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC); break; } base = of_io_request_and_map(dn, 0, dn->full_name); if (IS_ERR(base)) { + of_node_put(dn); if (!ctrl.support_warm_boot) break; pr_err("error mapping DDR SHIMPHY %d\n", i); - return PTR_ERR(base); + ret = PTR_ERR(base); + goto ddr_shimphy_err; } ctrl.memcs[i].ddr_shimphy_base = base; ctrl.num_memc++; @@ -749,14 +756,18 @@ static int brcmstb_pm_probe(struct platform_device *pdev) for_each_matching_node(dn, brcmstb_memc_of_match) { base = of_iomap(dn, 0); if (!base) { + of_node_put(dn); pr_err("error mapping DDR Sequencer %d\n", i); - return -ENOMEM; + ret = -ENOMEM; + goto brcmstb_memc_err; } of_id = of_match_node(brcmstb_memc_of_match, dn); if (!of_id) { iounmap(base); - return -EINVAL; + of_node_put(dn); + ret = -EINVAL; + goto brcmstb_memc_err; } ddr_seq_data = of_id->data; @@ -776,21 +787,24 @@ static int brcmstb_pm_probe(struct platform_device *pdev) dn = of_find_matching_node(NULL, sram_dt_ids); if (!dn) { pr_err("SRAM not found\n"); - return -EINVAL; + ret = -EINVAL; + goto brcmstb_memc_err; } ret = brcmstb_init_sram(dn); of_node_put(dn); if (ret) { pr_err("error setting up SRAM for PM\n"); - return ret; + goto brcmstb_memc_err; } ctrl.pdev = pdev; ctrl.s3_params = kmalloc(sizeof(*ctrl.s3_params), GFP_KERNEL); - if (!ctrl.s3_params) - return -ENOMEM; + if (!ctrl.s3_params) { + ret = -ENOMEM; + goto s3_params_err; + } ctrl.s3_params_pa = dma_map_single(&pdev->dev, ctrl.s3_params, sizeof(*ctrl.s3_params), DMA_TO_DEVICE); @@ -810,7 +824,21 @@ static int brcmstb_pm_probe(struct platform_device *pdev) out: kfree(ctrl.s3_params); - +s3_params_err: + iounmap(ctrl.boot_sram); +brcmstb_memc_err: + for (i--; i >= 0; i--) + iounmap(ctrl.memcs[i].ddr_ctrl); +ddr_shimphy_err: + for (i = 0; i < ctrl.num_memc; i++) + iounmap(ctrl.memcs[i].ddr_shimphy_base); + + iounmap(ctrl.memcs[0].ddr_phy_base); +ddr_phy_err: + iounmap(ctrl.aon_ctrl_base); + if (s) + iounmap(ctrl.aon_sram); +aon_err: pr_warn("PM: initialization failed with code %d\n", ret); return ret; -- 2.25.1
From: Wenpeng Liang <liangwenpeng@huawei.com> stable inclusion from stable-v5.10.143 commit e198c0857032ceac643f2c58a114cf1ded672b28 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0c8b5d6268d92d141bfd64d21c870d295a84dee1 ] The value of qp->rq.wqe_shift of HIP08 is always determined by the number of sge. So delete the wrong branch. Fixes: cfc85f3e4b7f ("RDMA/hns: Add profile support for hip08 driver") Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC") Link: https://lore.kernel.org/r/20220829105021.1427804-3-liangwenpeng@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/infiniband/hw/hns/hns_roce_qp.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c index de70c8637333..def237557a49 100644 --- a/drivers/infiniband/hw/hns/hns_roce_qp.c +++ b/drivers/infiniband/hw/hns/hns_roce_qp.c @@ -462,11 +462,8 @@ static int set_rq_size(struct hns_roce_dev *hr_dev, struct ib_qp_cap *cap, hr_qp->rq.max_gs = roundup_pow_of_two(max(1U, cap->max_recv_sge) + hr_qp->rq.rsv_sge); - if (hr_dev->caps.max_rq_sg <= HNS_ROCE_SGE_IN_WQE) - hr_qp->rq.wqe_shift = ilog2(hr_dev->caps.max_rq_desc_sz); - else - hr_qp->rq.wqe_shift = ilog2(hr_dev->caps.max_rq_desc_sz * - hr_qp->rq.max_gs); + hr_qp->rq.wqe_shift = ilog2(hr_dev->caps.max_rq_desc_sz * + hr_qp->rq.max_gs); hr_qp->rq.wqe_cnt = cnt; -- 2.25.1
From: Claudiu Beznea <claudiu.beznea@microchip.com> stable inclusion from stable-v5.10.143 commit 6bbef2694a06cd17c364dcbee30483b2e4a2ce90 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit addf7efec23af2b67547800aa232d551945e7de2 ] Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-5-claudiu.beznea@microchip.... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index a06700e53e4c..7f16d62bb1a1 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -62,8 +62,8 @@ mcp16502@5b { regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -81,8 +81,8 @@ regulator-state-mem { vddio_ddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -104,8 +104,8 @@ regulator-state-mem { vdd_core: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -146,8 +146,8 @@ regulator-state-mem { LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { @@ -161,8 +161,8 @@ regulator-state-mem { LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { -- 2.25.1
From: Claudiu Beznea <claudiu.beznea@microchip.com> stable inclusion from stable-v5.10.143 commit 360dd120eb1105f7df0be2d67105b4ad310e82a0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 7737d93666eea282febf95e5fa3b3fde1f2549f3 ] Min and max output ranges of regulators need to satisfy board requirements not PMIC requirements. Thus adjust device tree to cope with this. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-6-claudiu.beznea@microchip.... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm/boot/dts/at91-sama5d2_icp.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 634411d13b4a..9fbcd107d1af 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -195,8 +195,8 @@ mcp16502@5b { regulators { vdd_io_reg: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -214,8 +214,8 @@ regulator-state-mem { VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -233,8 +233,8 @@ regulator-state-mem { VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -271,8 +271,8 @@ regulator-state-mem { LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; regulator-always-on; regulator-state-standby { @@ -286,8 +286,8 @@ regulator-state-mem { LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { -- 2.25.1
From: Claudiu Beznea <claudiu.beznea@microchip.com> stable inclusion from stable-v5.10.143 commit 0796953300f56c46e7b3af1443d51b470800de9c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 617a0d9fe6867bf5b3b7272629cd780c27c877d9 ] ldo2 is not used by any consumer on sama5d27_wlsom1 board, thus don't keep it enabled all the time. Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-8-claudiu.beznea@microchip.... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 7f16d62bb1a1..9c8b3eb49ea3 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -163,7 +163,6 @@ LDO2 { regulator-name = "LDO2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - regulator-always-on; regulator-state-standby { regulator-on-in-suspend; -- 2.25.1
From: Claudiu Beznea <claudiu.beznea@microchip.com> stable inclusion from stable-v5.10.143 commit 7d29f2bdd1675cf6f0e180b9209fbff6f5b53514 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 3d074b750d2b4c91962f10ea1df1c289ce0d3ce8 ] VDD_OTHER is not connected to any on board consumer thus it is not needed to keep it enabled all the time. Fixes: 68a95ef72cef ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-9-claudiu.beznea@microchip.... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm/boot/dts/at91-sama5d2_icp.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 9fbcd107d1af..00b9e88ff545 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -256,7 +256,6 @@ VDD_OTHER { regulator-max-microvolt = <1850000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; - regulator-always-on; regulator-state-standby { regulator-on-in-suspend; -- 2.25.1
From: Harsh Modi <harshmodi@google.com> stable inclusion from stable-v5.10.143 commit 908180f633d04a58864a11554fd71fc5b9466585 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d047283a7034140ea5da759a494fd2274affdd46 ] The IPv6 path already drops dst in the daddr changed case, but the IPv4 path does not. This change makes the two code paths consistent. Further, it is possible that there is already a metadata_dst allocated from ingress that might already be attached to skbuff->dst while following the bridge path. If it is not released before setting a new metadata_dst, it will be leaked. This is similar to what is done in bpf_set_tunnel_key() or ip6_route_input(). It is important to note that the memory being leaked is not the dst being set in the bridge code, but rather memory allocated from some other code path that is not being freed correctly before the skb dst is overwritten. An example of the leakage fixed by this commit found using kmemleak: unreferenced object 0xffff888010112b00 (size 256): comm "softirq", pid 0, jiffies 4294762496 (age 32.012s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 80 16 f1 83 ff ff ff ff ................ e1 4e f6 82 ff ff ff ff 00 00 00 00 00 00 00 00 .N.............. backtrace: [<00000000d79567ea>] metadata_dst_alloc+0x1b/0xe0 [<00000000be113e13>] udp_tun_rx_dst+0x174/0x1f0 [<00000000a36848f4>] geneve_udp_encap_recv+0x350/0x7b0 [<00000000d4afb476>] udp_queue_rcv_one_skb+0x380/0x560 [<00000000ac064aea>] udp_unicast_rcv_skb+0x75/0x90 [<000000009a8ee8c5>] ip_protocol_deliver_rcu+0xd8/0x230 [<00000000ef4980bb>] ip_local_deliver_finish+0x7a/0xa0 [<00000000d7533c8c>] __netif_receive_skb_one_core+0x89/0xa0 [<00000000a879497d>] process_backlog+0x93/0x190 [<00000000e41ade9f>] __napi_poll+0x28/0x170 [<00000000b4c0906b>] net_rx_action+0x14f/0x2a0 [<00000000b20dd5d4>] __do_softirq+0xf4/0x305 [<000000003a7d7e15>] __irq_exit_rcu+0xc3/0x140 [<00000000968d39a2>] sysvec_apic_timer_interrupt+0x9e/0xc0 [<000000009e920794>] asm_sysvec_apic_timer_interrupt+0x16/0x20 [<000000008942add0>] native_safe_halt+0x13/0x20 Florian Westphal says: "Original code was likely fine because nothing ever did set a skb->dst entry earlier than bridge in those days." Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Harsh Modi <harshmodi@google.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/bridge/br_netfilter_hooks.c | 2 ++ net/bridge/br_netfilter_ipv6.c | 1 + 2 files changed, 3 insertions(+) diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c index 10a2c7bca719..a718204c4bfd 100644 --- a/net/bridge/br_netfilter_hooks.c +++ b/net/bridge/br_netfilter_hooks.c @@ -384,6 +384,7 @@ static int br_nf_pre_routing_finish(struct net *net, struct sock *sk, struct sk_ /* - Bridged-and-DNAT'ed traffic doesn't * require ip_forwarding. */ if (rt->dst.dev == dev) { + skb_dst_drop(skb); skb_dst_set(skb, &rt->dst); goto bridged_dnat; } @@ -413,6 +414,7 @@ static int br_nf_pre_routing_finish(struct net *net, struct sock *sk, struct sk_ kfree_skb(skb); return 0; } + skb_dst_drop(skb); skb_dst_set_noref(skb, &rt->dst); } diff --git a/net/bridge/br_netfilter_ipv6.c b/net/bridge/br_netfilter_ipv6.c index e4e0c836c3f5..6b07f30675bb 100644 --- a/net/bridge/br_netfilter_ipv6.c +++ b/net/bridge/br_netfilter_ipv6.c @@ -197,6 +197,7 @@ static int br_nf_pre_routing_finish_ipv6(struct net *net, struct sock *sk, struc kfree_skb(skb); return 0; } + skb_dst_drop(skb); skb_dst_set_noref(skb, &rt->dst); } -- 2.25.1
From: Pablo Neira Ayuso <pablo@netfilter.org> stable inclusion from stable-v5.10.143 commit 910891a2a44cdc49efcc4fe7459c1085ba00d0f4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 77972a36ecc4db7fc7c68f0e80714263c5f03f65 ] splice back the hook list so nft_chain_release_hook() has a chance to release the hooks. BUG: memory leak unreferenced object 0xffff88810180b100 (size 96): comm "syz-executor133", pid 3619, jiffies 4294945714 (age 12.690s) hex dump (first 32 bytes): 28 64 23 02 81 88 ff ff 28 64 23 02 81 88 ff ff (d#.....(d#..... 90 a8 aa 83 ff ff ff ff 00 00 b5 0f 81 88 ff ff ................ backtrace: [<ffffffff83a8c59b>] kmalloc include/linux/slab.h:600 [inline] [<ffffffff83a8c59b>] nft_netdev_hook_alloc+0x3b/0xc0 net/netfilter/nf_tables_api.c:1901 [<ffffffff83a9239a>] nft_chain_parse_netdev net/netfilter/nf_tables_api.c:1998 [inline] [<ffffffff83a9239a>] nft_chain_parse_hook+0x33a/0x530 net/netfilter/nf_tables_api.c:2073 [<ffffffff83a9b14b>] nf_tables_addchain.constprop.0+0x10b/0x950 net/netfilter/nf_tables_api.c:2218 [<ffffffff83a9c41b>] nf_tables_newchain+0xa8b/0xc60 net/netfilter/nf_tables_api.c:2593 [<ffffffff83a3d6a6>] nfnetlink_rcv_batch+0xa46/0xd20 net/netfilter/nfnetlink.c:517 [<ffffffff83a3db79>] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:638 [inline] [<ffffffff83a3db79>] nfnetlink_rcv+0x1f9/0x220 net/netfilter/nfnetlink.c:656 [<ffffffff83a13b17>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff83a13b17>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff83a13fd6>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff83865ab6>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff83865ab6>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8386601c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2482 [<ffffffff8386a918>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536 [<ffffffff8386aaa8>] __sys_sendmsg+0x88/0x100 net/socket.c:2565 [<ffffffff845e5955>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e5955>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: d54725cd11a5 ("netfilter: nf_tables: support for multiple devices per netdev hook") Reported-by: syzbot+5fcdbfab6d6744c57418@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/netfilter/nf_tables_api.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 1b039476e4d6..b8e7e1c5c08a 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1971,8 +1971,10 @@ static int nft_basechain_init(struct nft_base_chain *basechain, u8 family, chain->flags |= NFT_CHAIN_BASE | flags; basechain->policy = NF_ACCEPT; if (chain->flags & NFT_CHAIN_HW_OFFLOAD && - !nft_chain_offload_support(basechain)) + !nft_chain_offload_support(basechain)) { + list_splice_init(&basechain->hook_list, &hook->list); return -EOPNOTSUPP; + } flow_block_init(&basechain->flow_block); -- 2.25.1
From: Takashi Iwai <tiwai@suse.de> stable inclusion from stable-v5.10.143 commit 1d29a63585b3344137ceeaf19f5a3bfd222f7c9e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 7e1afce5866e02b45bf88c27dd7de1b9dfade1cc ] The info message that was added in the commit a4aad5636c72 ("ALSA: usb-audio: Inform devices that need delayed registration") is actually useful to know the need for the delayed registration. However, it turned out that this doesn't catch the all cases; namely, this warned only when a PCM stream is attached onto the existing PCM instance, but it doesn't count for a newly created PCM instance. This made confusion as if there were no further delayed registration. This patch moves the check to the code path for either adding a stream or creating a PCM instance. Also, make it simpler by checking the card->registered flag instead of querying each snd_device state. Fixes: a4aad5636c72 ("ALSA: usb-audio: Inform devices that need delayed registration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082 Link: https://lore.kernel.org/r/20220831125901.4660-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/usb/stream.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/usb/stream.c b/sound/usb/stream.c index 7711184a0d0b..c4f4585f9b85 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -496,6 +496,10 @@ static int __snd_usb_add_audio_stream(struct snd_usb_audio *chip, return 0; } } + + if (chip->card->registered) + chip->need_delayed_register = true; + /* look for an empty stream */ list_for_each_entry(as, &chip->pcm_list, list) { if (as->fmt_type != fp->fmt_type) @@ -503,9 +507,6 @@ static int __snd_usb_add_audio_stream(struct snd_usb_audio *chip, subs = &as->substream[stream]; if (subs->ep_num) continue; - if (snd_device_get_state(chip->card, as->pcm) != - SNDRV_DEV_BUILD) - chip->need_delayed_register = true; err = snd_pcm_new_stream(as->pcm, stream, 1); if (err < 0) return err; -- 2.25.1
From: Takashi Iwai <tiwai@suse.de> stable inclusion from stable-v5.10.143 commit 6ccbb74801bbcba94697743adbc917352aef2a9d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2027f114686e0f3f1f39971964dfc618637c88c2 ] When the delayed registration is specified via either delayed_register option or the quirk, we delay the invocation of snd_card_register() until the given interface. But if a wrong value has been set there and there are more interfaces over the given interface number, snd_card_register() call would be missing for those interfaces. This patch catches up those missing calls by fixing the comparison of the interface number. Now the call is skipped only if the processed interface is less than the given interface, instead of the exact match. Fixes: b70038ef4fea ("ALSA: usb-audio: Add delayed_register option") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082 Link: https://lore.kernel.org/r/20220831125901.4660-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/usb/card.c | 2 +- sound/usb/quirks.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index a3e06a71cf35..6b172db58a31 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -667,7 +667,7 @@ static bool check_delayed_register_option(struct snd_usb_audio *chip, int iface) if (delayed_register[i] && sscanf(delayed_register[i], "%x:%x", &id, &inum) == 2 && id == chip->usb_id) - return inum != iface; + return iface < inum; } return false; diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 6333a2ecb848..41f5d8242478 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1911,7 +1911,7 @@ bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface) for (q = registration_quirks; q->usb_id; q++) if (chip->usb_id == q->usb_id) - return iface != q->interface; + return iface < q->interface; /* Register as normal */ return false; -- 2.25.1
From: David Howells <dhowells@redhat.com> stable inclusion from stable-v5.10.143 commit fbbd5d05ea63cabff8c521e645dfcc8f4f7f78be category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0d40f728e28393a8817d1fcae923dfa3409e488c ] rxkad_verify_packet_2() has a small stack-allocated sglist of 4 elements, but if that isn't sufficient for the number of fragments in the socket buffer, we try to allocate an sglist large enough to hold all the fragments. However, for large packets with a lot of fragments, this isn't sufficient and we need at least one additional fragment. The problem manifests as skb_to_sgvec() returning -EMSGSIZE and this then getting returned by userspace. Most of the time, this isn't a problem as rxrpc sets a limit of 5692, big enough for 4 jumbo subpackets to be glued together; occasionally, however, the server will ignore the reported limit and give a packet that's a lot bigger - say 19852 bytes with ->nr_frags being 7. skb_to_sgvec() then tries to return a "zeroth" fragment that seems to occur before the fragments counted by ->nr_frags and we hit the end of the sglist too early. Note that __skb_to_sgvec() also has an skb_walk_frags() loop that is recursive up to 24 deep. I'm not sure if I need to take account of that too - or if there's an easy way of counting those frags too. Fix this by counting an extra frag and allocating a larger sglist based on that. Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/rxrpc/rxkad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c index f114dc2af5cf..5345e8eefd33 100644 --- a/net/rxrpc/rxkad.c +++ b/net/rxrpc/rxkad.c @@ -451,7 +451,7 @@ static int rxkad_verify_packet_2(struct rxrpc_call *call, struct sk_buff *skb, * directly into the target buffer. */ sg = _sg; - nsg = skb_shinfo(skb)->nr_frags; + nsg = skb_shinfo(skb)->nr_frags + 1; if (nsg <= 4) { nsg = 4; } else { -- 2.25.1
From: David Howells <dhowells@redhat.com> stable inclusion from stable-v5.10.143 commit 63677a09238a0891521132f59d14668e3722e73f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 7903192c4b4a82d792cb0dc5e2779a2efe60d45b ] rxrpc and kafs between them try to use the receive timestamp on the first data packet (ie. the one with sequence number 1) as a base from which to calculate the time at which callback promise and lock expiration occurs. However, we don't know how long it took for the server to send us the reply from it having completed the basic part of the operation - it might then, for instance, have to send a bunch of a callback breaks, depending on the particular operation. Fix this by using the time at which the operation is issued on the client as a base instead. That should never be longer than the server's idea of the expiry time. Fixes: 781070551c26 ("afs: Fix calculation of callback expiry time") Fixes: 2070a3e44962 ("rxrpc: Allow the reply time to be obtained on a client call") Suggested-by: Jeffrey E Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/afs/flock.c | 2 +- fs/afs/fsclient.c | 2 +- fs/afs/internal.h | 3 +-- fs/afs/rxrpc.c | 7 +------ fs/afs/yfsclient.c | 3 +-- 5 files changed, 5 insertions(+), 12 deletions(-) diff --git a/fs/afs/flock.c b/fs/afs/flock.c index cb3054c7843e..466ad609f205 100644 --- a/fs/afs/flock.c +++ b/fs/afs/flock.c @@ -76,7 +76,7 @@ void afs_lock_op_done(struct afs_call *call) if (call->error == 0) { spin_lock(&vnode->lock); trace_afs_flock_ev(vnode, NULL, afs_flock_timestamp, 0); - vnode->locked_at = call->reply_time; + vnode->locked_at = call->issue_time; afs_schedule_lock_extension(vnode); spin_unlock(&vnode->lock); } diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c index 1d95ed9dd86e..0048a32cb040 100644 --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -130,7 +130,7 @@ static void xdr_decode_AFSFetchStatus(const __be32 **_bp, static time64_t xdr_decode_expiry(struct afs_call *call, u32 expiry) { - return ktime_divns(call->reply_time, NSEC_PER_SEC) + expiry; + return ktime_divns(call->issue_time, NSEC_PER_SEC) + expiry; } static void xdr_decode_AFSCallBack(const __be32 **_bp, diff --git a/fs/afs/internal.h b/fs/afs/internal.h index dc08a3d9b3a8..637cbe549397 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -135,7 +135,6 @@ struct afs_call { bool need_attention; /* T if RxRPC poked us */ bool async; /* T if asynchronous */ bool upgrade; /* T to request service upgrade */ - bool have_reply_time; /* T if have got reply_time */ bool intr; /* T if interruptible */ bool unmarshalling_error; /* T if an unmarshalling error occurred */ u16 service_id; /* Actual service ID (after upgrade) */ @@ -149,7 +148,7 @@ struct afs_call { } __attribute__((packed)); __be64 tmp64; }; - ktime_t reply_time; /* Time of first reply packet */ + ktime_t issue_time; /* Time of issue of operation */ }; struct afs_call_type { diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c index efe0fb3ad8bd..535d28b44bca 100644 --- a/fs/afs/rxrpc.c +++ b/fs/afs/rxrpc.c @@ -429,6 +429,7 @@ void afs_make_call(struct afs_addr_cursor *ac, struct afs_call *call, gfp_t gfp) if (call->max_lifespan) rxrpc_kernel_set_max_life(call->net->socket, rxcall, call->max_lifespan); + call->issue_time = ktime_get_real(); /* send the request */ iov[0].iov_base = call->request; @@ -533,12 +534,6 @@ static void afs_deliver_to_call(struct afs_call *call) return; } - if (!call->have_reply_time && - rxrpc_kernel_get_reply_time(call->net->socket, - call->rxcall, - &call->reply_time)) - call->have_reply_time = true; - ret = call->type->deliver(call); state = READ_ONCE(call->state); if (ret == 0 && call->unmarshalling_error) diff --git a/fs/afs/yfsclient.c b/fs/afs/yfsclient.c index bd787e71a657..5b2ef5ffd716 100644 --- a/fs/afs/yfsclient.c +++ b/fs/afs/yfsclient.c @@ -239,8 +239,7 @@ static void xdr_decode_YFSCallBack(const __be32 **_bp, struct afs_callback *cb = &scb->callback; ktime_t cb_expiry; - cb_expiry = call->reply_time; - cb_expiry = ktime_add(cb_expiry, xdr_to_u64(x->expiration_time) * 100); + cb_expiry = ktime_add(call->issue_time, xdr_to_u64(x->expiration_time) * 100); cb->expires_at = ktime_divns(cb_expiry, NSEC_PER_SEC); scb->have_cb = true; *_bp += xdr_size(x); -- 2.25.1
From: Dan Carpenter <dan.carpenter@oracle.com> stable inclusion from stable-v5.10.143 commit 22922da7373c38c91dd36de993589b81a4129178 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e2b224abd9bf45dcb55750479fc35970725a430b ] There is a shift wrapping bug in this code so anything thing above 31 will return false. Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/tipc/monitor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tipc/monitor.c b/net/tipc/monitor.c index a37190da5a50..1d90f39129ca 100644 --- a/net/tipc/monitor.c +++ b/net/tipc/monitor.c @@ -130,7 +130,7 @@ static void map_set(u64 *up_map, int i, unsigned int v) static int map_get(u64 up_map, int i) { - return (up_map & (1 << i)) >> i; + return (up_map & (1ULL << i)) >> i; } static struct tipc_peer *peer_prev(struct tipc_peer *peer) -- 2.25.1
From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> stable inclusion from stable-v5.10.143 commit 9d11d06e50bb88dc2464d75a015c8448eaa5e460 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 59ac325557b6c14f1f793b90d3946bc145ffa085 ] pf->avail_txqs was allocated using bitmap_zalloc, bitmap_free should be used to free this memory. Fixes: 78b5713ac1241 ("ice: Alloc queue management bitmaps and arrays dynamically") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/intel/ice/ice_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 810f2bdb9164..f193709c8efc 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -3404,7 +3404,7 @@ static int ice_init_pf(struct ice_pf *pf) pf->avail_rxqs = bitmap_zalloc(pf->max_pf_rxqs, GFP_KERNEL); if (!pf->avail_rxqs) { - devm_kfree(ice_pf_to_dev(pf), pf->avail_txqs); + bitmap_free(pf->avail_txqs); pf->avail_txqs = NULL; return -ENOMEM; } -- 2.25.1
From: Ivan Vecera <ivecera@redhat.com> stable inclusion from stable-v5.10.143 commit 342d77769a6cceb3df7720a1e18baa4339eee3fc category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit fb8396aeda5872369a8ed6d2301e2c86e303c520 ] The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. Fixes: 0ef2d5afb12d ("i40e: KISS the client interface") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/intel/i40e/i40e_client.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_client.c b/drivers/net/ethernet/intel/i40e/i40e_client.c index 32f3facbed1a..b3cb5d103326 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_client.c +++ b/drivers/net/ethernet/intel/i40e/i40e_client.c @@ -178,6 +178,10 @@ void i40e_notify_client_of_netdev_close(struct i40e_vsi *vsi, bool reset) "Cannot locate client instance close routine\n"); return; } + if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) { + dev_dbg(&pf->pdev->dev, "Client is not open, abort close\n"); + return; + } cdev->client->ops->close(&cdev->lan_info, cdev->client, reset); clear_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state); i40e_client_release_qvlist(&cdev->lan_info); @@ -374,7 +378,6 @@ void i40e_client_subtask(struct i40e_pf *pf) /* Remove failed client instance */ clear_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state); - i40e_client_del_instance(pf); return; } } -- 2.25.1
From: Paul Durrant <pdurrant@amazon.com> stable inclusion from stable-v5.10.143 commit 0f1e7977e1f21f5ccd634ef00575ba10d8efc8a0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c55f34b6aec2a8cb47eadaffea773e83bf85de91 ] Removing 'hotplug-status' in backend_disconnected() means that it will be removed even in the case that the frontend unilaterally disconnects (which it is free to do at any time). The consequence of this is that, when the frontend attempts to re-connect, the backend gets stuck in 'InitWait' rather than moving straight to 'Connected' (which it can do because the hotplug script has already run). Instead, the 'hotplug-status' mode should be removed in netback_remove() i.e. when the vif really is going away. Fixes: 0f4558ae9187 ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"") Signed-off-by: Paul Durrant <pdurrant@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/xen-netback/xenbus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index ca261e0fc9c9..9ee9ce0493fe 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -256,7 +256,6 @@ static void backend_disconnect(struct backend_info *be) unsigned int queue_index; xen_unregister_watchers(vif); - xenbus_rm(XBT_NIL, be->dev->nodename, "hotplug-status"); #ifdef CONFIG_DEBUG_FS xenvif_debugfs_delif(vif); #endif /* CONFIG_DEBUG_FS */ @@ -984,6 +983,7 @@ static int netback_remove(struct xenbus_device *dev) struct backend_info *be = dev_get_drvdata(&dev->dev); unregister_hotplug_status_watch(be); + xenbus_rm(XBT_NIL, dev->nodename, "hotplug-status"); if (be->vif) { kobject_uevent(&dev->dev.kobj, KOBJ_OFFLINE); backend_disconnect(be); -- 2.25.1
From: Linus Walleij <linus.walleij@linaro.org> stable inclusion from stable-v5.10.143 commit 047e66867eb6ffc4dcbf145b13f9943990f1ca88 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0d1b756acf60da5004c1e20ca4462f0c257bf6e1 ] Functions that work on a pointer to virtual memory such as virt_to_pfn() and users of that function such as virt_to_page() are supposed to pass a pointer to virtual memory, ideally a (void *) or other pointer. However since many architectures implement virt_to_pfn() as a macro, this function becomes polymorphic and accepts both a (unsigned long) and a (void *). If we instead implement a proper virt_to_pfn(void *addr) function the following happens (occurred on arch/arm): drivers/infiniband/sw/siw/siw_qp_tx.c:32:23: warning: incompatible integer to pointer conversion passing 'dma_addr_t' (aka 'unsigned int') to parameter of type 'const void *' [-Wint-conversion] drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: warning: passing argument 1 of 'virt_to_pfn' makes pointer from integer without a cast [-Wint-conversion] drivers/infiniband/sw/siw/siw_qp_tx.c:538:36: warning: incompatible integer to pointer conversion passing 'unsigned long long' to parameter of type 'const void *' [-Wint-conversion] Fix this with an explicit cast. In one case where the SIW SGE uses an unaligned u64 we need a double cast modifying the virtual address (va) to a platform-specific uintptr_t before casting to a (void *). Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Cc: linux-rdma@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220902215918.603761-1-linus.walleij@linaro.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/infiniband/sw/siw/siw_qp_tx.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/sw/siw/siw_qp_tx.c b/drivers/infiniband/sw/siw/siw_qp_tx.c index 7989c4043db4..3c3ae5ef2942 100644 --- a/drivers/infiniband/sw/siw/siw_qp_tx.c +++ b/drivers/infiniband/sw/siw/siw_qp_tx.c @@ -29,7 +29,7 @@ static struct page *siw_get_pblpage(struct siw_mem *mem, u64 addr, int *idx) dma_addr_t paddr = siw_pbl_get_buffer(pbl, offset, NULL, idx); if (paddr) - return virt_to_page(paddr); + return virt_to_page((void *)paddr); return NULL; } @@ -523,13 +523,23 @@ static int siw_tx_hdt(struct siw_iwarp_tx *c_tx, struct socket *s) kunmap(p); } } else { - u64 va = sge->laddr + sge_off; + /* + * Cast to an uintptr_t to preserve all 64 bits + * in sge->laddr. + */ + uintptr_t va = (uintptr_t)(sge->laddr + sge_off); - page_array[seg] = virt_to_page(va & PAGE_MASK); + /* + * virt_to_page() takes a (void *) pointer + * so cast to a (void *) meaning it will be 64 + * bits on a 64 bit platform and 32 bits on a + * 32 bit platform. + */ + page_array[seg] = virt_to_page((void *)(va & PAGE_MASK)); if (do_crc) crypto_shash_update( c_tx->mpa_crc_hd, - (void *)(uintptr_t)va, + (void *)va, plen); } -- 2.25.1
From: David Lebrun <dlebrun@google.com> stable inclusion from stable-v5.10.143 commit 076f2479fc5a15c4a970ca3b5e57d42ba09a31fa category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 84a53580c5d2138c7361c7c3eea5b31827e63b35 ] The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <wmliang.tw@gmail.com> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853dc1c9c1 ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/ipv6/seg6.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c index bff6bc75cfb7..45e3f1b552e0 100644 --- a/net/ipv6/seg6.c +++ b/net/ipv6/seg6.c @@ -135,6 +135,11 @@ static int seg6_genl_sethmac(struct sk_buff *skb, struct genl_info *info) goto out_unlock; } + if (slen > nla_len(info->attrs[SEG6_ATTR_SECRET])) { + err = -EINVAL; + goto out_unlock; + } + if (hinfo) { err = seg6_hmac_info_del(net, hmackeyid); if (err) -- 2.25.1
From: Yishai Hadas <yishaih@nvidia.com> stable inclusion from stable-v5.10.143 commit e8de6cb5755eae7b793d8c00c8696c8667d44a7f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 85eaeb5058f0f04dffb124c97c86b4f18db0b833 ] Fix a nested dead lock as part of ODP flow by using mmput_async(). From the below call trace [1] can see that calling mmput() once we have the umem_odp->umem_mutex locked as required by ib_umem_odp_map_dma_and_lock() might trigger in the same task the exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which may dead lock when trying to lock the same mutex. Moving to use mmput_async() will solve the problem as the above exit_mmap() flow will be called in other task and will be executed once the lock will be available. [1] [64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid: 2 flags:0x00004000 [64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] [64843.077719] Call Trace: [64843.077722] <TASK> [64843.077724] __schedule+0x23d/0x590 [64843.077729] schedule+0x4e/0xb0 [64843.077735] schedule_preempt_disabled+0xe/0x10 [64843.077740] __mutex_lock.constprop.0+0x263/0x490 [64843.077747] __mutex_lock_slowpath+0x13/0x20 [64843.077752] mutex_lock+0x34/0x40 [64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib] [64843.077808] __mmu_notifier_release+0x1a4/0x200 [64843.077816] exit_mmap+0x1bc/0x200 [64843.077822] ? walk_page_range+0x9c/0x120 [64843.077828] ? __cond_resched+0x1a/0x50 [64843.077833] ? mutex_lock+0x13/0x40 [64843.077839] ? uprobe_clear_state+0xac/0x120 [64843.077860] mmput+0x5f/0x140 [64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core] [64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib] [64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib] [64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560 [mlx5_ib] [64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib] [64843.078051] process_one_work+0x22b/0x3d0 [64843.078059] worker_thread+0x53/0x410 [64843.078065] ? process_one_work+0x3d0/0x3d0 [64843.078073] kthread+0x12a/0x150 [64843.078079] ? set_kthread_struct+0x50/0x50 [64843.078085] ret_from_fork+0x22/0x30 [64843.078093] </TASK> Fixes: 36f30e486dce ("IB/core: Improve ODP to use hmm_range_fault()") Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/74d93541ea533ef7daec6f126deb1072500aeb16.166125184... Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/infiniband/core/umem_odp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/umem_odp.c b/drivers/infiniband/core/umem_odp.c index 323f6cf00682..af4af4789ef2 100644 --- a/drivers/infiniband/core/umem_odp.c +++ b/drivers/infiniband/core/umem_odp.c @@ -466,7 +466,7 @@ int ib_umem_odp_map_dma_and_lock(struct ib_umem_odp *umem_odp, u64 user_virt, mutex_unlock(&umem_odp->umem_mutex); out_put_mm: - mmput(owning_mm); + mmput_async(owning_mm); out_put_task: if (owning_process) put_task_struct(owning_process); -- 2.25.1
From: Chris Mi <cmi@nvidia.com> stable inclusion from stable-v5.10.143 commit a00b1b10e0a60474c2a60ef84f4d4736f7051535 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 74b30b3ad5cec95d2647e796d10137438a098bc1 ] When accessing Ports Performance Counters Register (PPCNT), local port must be one if it is Function-Per-Port HCA that HCA_CAP.num_ports is 1. The offending patch can change the local port to other values when accessing PPCNT after enabling switchdev mode. The following syndrome will be printed: # cat /sys/class/infiniband/rdmap4s0f0/ports/2/counters/* # dmesg mlx5_core 0000:04:00.0: mlx5_cmd_check:756:(pid 12450): ACCESS_REG(0x805) op_mod(0x1) failed, status bad parameter(0x3), syndrome (0x1e5585) Fix it by setting local port to one for Function-Per-Port HCA. Fixes: 210b1f78076f ("IB/mlx5: When not in dual port RoCE mode, use provided port as native") Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Chris Mi <cmi@nvidia.com> Link: https://lore.kernel.org/r/6c5086c295c76211169e58dbd610fb0402360bab.166176345... Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/infiniband/hw/mlx5/mad.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c index 9bb9bb058932..cca7a4a6bd82 100644 --- a/drivers/infiniband/hw/mlx5/mad.c +++ b/drivers/infiniband/hw/mlx5/mad.c @@ -166,6 +166,12 @@ static int process_pma_cmd(struct mlx5_ib_dev *dev, u8 port_num, mdev = dev->mdev; mdev_port_num = 1; } + if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1) { + /* set local port to one for Function-Per-Port HCA. */ + mdev = dev->mdev; + mdev_port_num = 1; + } + /* Declaring support of extended counters */ if (in_mad->mad_hdr.attr_id == IB_PMA_CLASS_PORT_INFO) { struct ib_class_port_info cpi = {}; -- 2.25.1
From: Sagi Grimberg <sagi@grimberg.me> stable inclusion from stable-v5.10.143 commit 5914fa32ef1b7766fea933f9eed94ac5c00aa7ff category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 160f3549a907a50e51a8518678ba2dcf2541abea ] We should also bail from the io_work loop when we set rd_enabled to true, so we don't attempt to read data from the socket when the TCP stream is already out-of-sync or corrupted. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/nvme/host/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 8d640c248343..d5fdb3c60183 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -1196,7 +1196,7 @@ static void nvme_tcp_io_work(struct work_struct *w) else if (unlikely(result < 0)) return; - if (!pending) + if (!pending || !queue->rd_enabled) return; } while (!time_after(jiffies, deadline)); /* quota is exhausted */ -- 2.25.1
From: Sagi Grimberg <sagi@grimberg.me> stable inclusion from stable-v5.10.143 commit 6a2a344844625f3b6ffc704098c4eea5f926711b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 3770a42bb8ceb856877699257a43c0585a5d2996 ] When we queue requests, we strive to batch as much as possible and also signal the network stack that more data is about to be sent over a socket with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued as well as queue->more_requests that is derived from the block layer last-in-batch indication. We set more_request=true when we flush the request directly from .queue_rq submission context (in nvme_tcp_send_all), however this is wrongly assuming that no other requests may be queued during the execution of nvme_tcp_send_all. Due to this, a race condition may happen where: 1. request X is queued as !last-in-batch 2. request X submission context calls nvme_tcp_send_all directly 3. nvme_tcp_send_all is preempted and schedules to a different cpu 4. request Y is queued as last-in-batch 5. nvme_tcp_send_all context sends request X+Y, however signals for both MSG_SENDPAGE_NOTLAST because queue->more_requests=true. ==> none of the requests is pushed down to the wire as the network stack is waiting for more data, both requests timeout. To fix this, we eliminate queue->more_requests and only rely on the queue req_list and send_list to be not-empty. Fixes: 122e5b9f3d37 ("nvme-tcp: optimize network stack with setting msg flags according to batch size") Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/nvme/host/tcp.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index d5fdb3c60183..e11d0523dd45 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -118,7 +118,6 @@ struct nvme_tcp_queue { struct mutex send_mutex; struct llist_head req_list; struct list_head send_list; - bool more_requests; /* recv state */ void *pdu; @@ -314,7 +313,7 @@ static inline void nvme_tcp_send_all(struct nvme_tcp_queue *queue) static inline bool nvme_tcp_queue_more(struct nvme_tcp_queue *queue) { return !list_empty(&queue->send_list) || - !llist_empty(&queue->req_list) || queue->more_requests; + !llist_empty(&queue->req_list); } static inline void nvme_tcp_queue_request(struct nvme_tcp_request *req, @@ -333,9 +332,7 @@ static inline void nvme_tcp_queue_request(struct nvme_tcp_request *req, */ if (queue->io_cpu == raw_smp_processor_id() && sync && empty && mutex_trylock(&queue->send_mutex)) { - queue->more_requests = !last; nvme_tcp_send_all(queue); - queue->more_requests = false; mutex_unlock(&queue->send_mutex); } -- 2.25.1
From: Neal Cardwell <ncardwell@google.com> stable inclusion from stable-v5.10.143 commit d47475d4e5027a8701a2f4463f991a3cfc1a186a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 686dc2db2a0fdc1d34b424ec2c0a735becd8d62b ] Fix a bug reported and analyzed by Nagaraj Arankal, where the handling of a spurious non-SACK RTO could cause a connection to fail to clear retrans_stamp, causing a later RTO to very prematurely time out the connection with ETIMEDOUT. Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent report: (*1) Send one data packet on a non-SACK connection (*2) Because no ACK packet is received, the packet is retransmitted and we enter CA_Loss; but this retransmission is spurious. (*3) The ACK for the original data is received. The transmitted packet is acknowledged. The TCP timestamp is before the retrans_stamp, so tcp_may_undo() returns true, and tcp_try_undo_loss() returns true without changing state to Open (because tcp_is_sack() is false), and tcp_process_loss() returns without calling tcp_try_undo_recovery(). Normally after undoing a CA_Loss episode, tcp_fastretrans_alert() would see that the connection has returned to CA_Open and fall through and call tcp_try_to_open(), which would set retrans_stamp to 0. However, for non-SACK connections we hold the connection in CA_Loss, so do not fall through to call tcp_try_to_open() and do not set retrans_stamp to 0. So retrans_stamp is (erroneously) still non-zero. At this point the first "retransmission event" has passed and been recovered from. Any future retransmission is a completely new "event". However, retrans_stamp is erroneously still set. (And we are still in CA_Loss, which is correct.) (*4) After 16 minutes (to correspond with tcp_retries2=15), a new data packet is sent. Note: No data is transmitted between (*3) and (*4) and we disabled keep alives. The socket's timeout SHOULD be calculated from this point in time, but instead it's calculated from the prior "event" 16 minutes ago (step (*2)). (*5) Because no ACK packet is received, the packet is retransmitted. (*6) At the time of the 2nd retransmission, the socket returns ETIMEDOUT, prematurely, because retrans_stamp is (erroneously) too far in the past (set at the time of (*2)). This commit fixes this bug by ensuring that we reuse in tcp_try_undo_loss() the same careful logic for non-SACK connections that we have in tcp_try_undo_recovery(). To avoid duplicating logic, we factor out that logic into a new tcp_is_non_sack_preventing_reopen() helper and call that helper from both undo functions. Fixes: da34ac7626b5 ("tcp: only undo on partial ACKs in CA_Loss") Reported-by: Nagaraj Arankal <nagaraj.p.arankal@hpe.com> Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB... Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220903121023.866900-1-ncardwell.kernel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/ipv4/tcp_input.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 4d1ceca815a8..f95a18b73677 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2496,6 +2496,21 @@ static inline bool tcp_may_undo(const struct tcp_sock *tp) return tp->undo_marker && (!tp->undo_retrans || tcp_packet_delayed(tp)); } +static bool tcp_is_non_sack_preventing_reopen(struct sock *sk) +{ + struct tcp_sock *tp = tcp_sk(sk); + + if (tp->snd_una == tp->high_seq && tcp_is_reno(tp)) { + /* Hold old state until something *above* high_seq + * is ACKed. For Reno it is MUST to prevent false + * fast retransmits (RFC2582). SACK TCP is safe. */ + if (!tcp_any_retrans_done(sk)) + tp->retrans_stamp = 0; + return true; + } + return false; +} + /* People celebrate: "We love our President!" */ static bool tcp_try_undo_recovery(struct sock *sk) { @@ -2518,14 +2533,8 @@ static bool tcp_try_undo_recovery(struct sock *sk) } else if (tp->rack.reo_wnd_persist) { tp->rack.reo_wnd_persist--; } - if (tp->snd_una == tp->high_seq && tcp_is_reno(tp)) { - /* Hold old state until something *above* high_seq - * is ACKed. For Reno it is MUST to prevent false - * fast retransmits (RFC2582). SACK TCP is safe. */ - if (!tcp_any_retrans_done(sk)) - tp->retrans_stamp = 0; + if (tcp_is_non_sack_preventing_reopen(sk)) return true; - } tcp_set_ca_state(sk, TCP_CA_Open); tp->is_sack_reneg = 0; return false; @@ -2561,6 +2570,8 @@ static bool tcp_try_undo_loss(struct sock *sk, bool frto_undo) NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPSPURIOUSRTOS); inet_csk(sk)->icsk_retransmits = 0; + if (tcp_is_non_sack_preventing_reopen(sk)) + return true; if (frto_undo || tcp_is_sack(tp)) { tcp_set_ca_state(sk, TCP_CA_Open); tp->is_sack_reneg = 0; -- 2.25.1
From: Claudiu Beznea <claudiu.beznea@microchip.com> stable inclusion from stable-v5.10.143 commit 9dacdc1d47eda4b0f511b5e5f1a554bc21a0af62 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 403fcb5118a0f4091001a537e76923031fb45eaf upstream. Remove references to struct mchp_i2s_caps as they are not used. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220727090814.2446111-3-claudiu.beznea@microchip.... Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/soc/atmel/mchp-spdiftx.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/sound/soc/atmel/mchp-spdiftx.c b/sound/soc/atmel/mchp-spdiftx.c index 3bd350afb743..2a1f25eeed39 100644 --- a/sound/soc/atmel/mchp-spdiftx.c +++ b/sound/soc/atmel/mchp-spdiftx.c @@ -196,7 +196,6 @@ struct mchp_spdiftx_dev { struct clk *pclk; struct clk *gclk; unsigned int fmt; - const struct mchp_i2s_caps *caps; int gclk_enabled:1; }; @@ -766,8 +765,6 @@ static const struct of_device_id mchp_spdiftx_dt_ids[] = { MODULE_DEVICE_TABLE(of, mchp_spdiftx_dt_ids); static int mchp_spdiftx_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; - const struct of_device_id *match; struct mchp_spdiftx_dev *dev; struct resource *mem; struct regmap *regmap; @@ -781,11 +778,6 @@ static int mchp_spdiftx_probe(struct platform_device *pdev) if (!dev) return -ENOMEM; - /* Get hardware capabilities. */ - match = of_match_node(mchp_spdiftx_dt_ids, np); - if (match) - dev->caps = match->data; - /* Map I/O registers. */ base = devm_platform_get_and_ioremap_resource(pdev, 0, &mem); if (IS_ERR(base)) -- 2.25.1
From: Nathan Chancellor <nathan@kernel.org> stable inclusion from stable-v5.10.143 commit a9453be390b6238645b6d372a6bab756899b7675 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 5c5c2baad2b55cc0a4b190266889959642298f79 upstream. A recent change in clang strengthened its -Wbitfield-constant-conversion to warn when 1 is assigned to a 1-bit signed integer bitfield, as it can only be 0 or -1, not 1: sound/soc/atmel/mchp-spdiftx.c:505:20: error: implicit truncation from 'int' to bit-field changes value from 1 to -1 [-Werror,-Wbitfield-constant-conversion] dev->gclk_enabled = 1; ^ ~ 1 error generated. The actual value of the field is never checked, just that it is not zero, so there is not a real bug here. However, it is simple enough to silence the warning by making the bitfield unsigned, which matches the mchp-spdifrx driver. Fixes: 06ca24e98e6b ("ASoC: mchp-spdiftx: add driver for S/PDIF TX Controller") Link: https://github.com/ClangBuiltLinux/linux/issues/1686 Link: https://github.com/llvm/llvm-project/commit/82afc9b169a67e8b8a1862fb9c41a2cd... Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220810010809.2024482-1-nathan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/soc/atmel/mchp-spdiftx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/atmel/mchp-spdiftx.c b/sound/soc/atmel/mchp-spdiftx.c index 2a1f25eeed39..0d2e3fa21519 100644 --- a/sound/soc/atmel/mchp-spdiftx.c +++ b/sound/soc/atmel/mchp-spdiftx.c @@ -196,7 +196,7 @@ struct mchp_spdiftx_dev { struct clk *pclk; struct clk *gclk; unsigned int fmt; - int gclk_enabled:1; + unsigned int gclk_enabled:1; }; static inline int mchp_spdiftx_is_running(struct mchp_spdiftx_dev *dev) -- 2.25.1
From: Yang Ling <gnaygnil@gmail.com> stable inclusion from stable-v5.10.143 commit 586f8c8330b72b316cb9a83695ef1f1e62ac6fec category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 35508d2424097f9b6a1a17aac94f702767035616 ] The RTCCTRL reg of LS1C is obselete. Writing this reg will cause system hang. Fixes: 60219c563c9b6 ("MIPS: Add RTC support for Loongson1C board") Signed-off-by: Yang Ling <gnaygnil@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Acked-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/mips/loongson32/ls1c/board.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c index e9de6da0ce51..9dcfe9de55b0 100644 --- a/arch/mips/loongson32/ls1c/board.c +++ b/arch/mips/loongson32/ls1c/board.c @@ -15,7 +15,6 @@ static struct platform_device *ls1c_platform_devices[] __initdata = { static int __init ls1c_platform_init(void) { ls1x_serial_set_uartclk(&ls1x_uart_pdev); - ls1x_rtc_set_extclk(&ls1x_rtc_pdev); return platform_add_devices(ls1c_platform_devices, ARRAY_SIZE(ls1c_platform_devices)); -- 2.25.1
From: Chao Gao <chao.gao@intel.com> stable inclusion from stable-v5.10.143 commit 1a2742552372585e3c865ce6837624f320985ef6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 3f0461613ebcdc8c4073e235053d06d5aa58750f ] The second operand passed to slot_addr() is declared as int or unsigned int in all call sites. The left-shift to get the offset of a slot can overflow if swiotlb size is larger than 4G. Convert the macro to an inline function and declare the second argument as phys_addr_t to avoid the potential overflow. Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single") Signed-off-by: Chao Gao <chao.gao@intel.com> Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- kernel/dma/swiotlb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 274587a57717..4a9831d01f0e 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -452,7 +452,10 @@ static void swiotlb_bounce(phys_addr_t orig_addr, phys_addr_t tlb_addr, } } -#define slot_addr(start, idx) ((start) + ((idx) << IO_TLB_SHIFT)) +static inline phys_addr_t slot_addr(phys_addr_t start, phys_addr_t idx) +{ + return start + (idx << IO_TLB_SHIFT); +} /* * Return the offset into a iotlb slot required to keep the device happy. -- 2.25.1
From: John Sperbeck <jsperbeck@google.com> stable inclusion from stable-v5.10.143 commit 5e17967c7ea2c6b167d370a759b16cab54583ac1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 94a568ce32038d8ff9257004bb4632e60eb43a49 ] We started using a 64 bit completion value. Unfortunately, we only stored the low 32-bits, so a very large completion value would never be matched in iommu_completion_wait(). Fixes: c69d89aff393 ("iommu/amd: Use 4K page for completion wait write-back semaphore") Signed-off-by: John Sperbeck <jsperbeck@google.com> Link: https://lore.kernel.org/r/20220801192229.3358786-1-jsperbeck@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/iommu/amd/iommu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c index 200cf5da5e0a..f216a86d9c81 100644 --- a/drivers/iommu/amd/iommu.c +++ b/drivers/iommu/amd/iommu.c @@ -923,7 +923,8 @@ static void build_completion_wait(struct iommu_cmd *cmd, memset(cmd, 0, sizeof(*cmd)); cmd->data[0] = lower_32_bits(paddr) | CMD_COMPL_WAIT_STORE_MASK; cmd->data[1] = upper_32_bits(paddr); - cmd->data[2] = data; + cmd->data[2] = lower_32_bits(data); + cmd->data[3] = upper_32_bits(data); CMD_SET_TYPE(cmd, CMD_COMPL_WAIT); } -- 2.25.1
From: Eliav Farber <farbere@amazon.com> stable inclusion from stable-v5.10.143 commit 13521c94b9b1a6d37ecb8a0c19879f871093c5f5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 81114fc3d27bf5b06b2137d2fd2b63da656a8b90 ] Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set to 0, and no voltage channel infos are allocated. The reason num is set to 0 when "intel,vm-map" is missing is to set the entire pvt->vm_idx[] with incremental channel numbers, but it didn't take into consideration that same num is used later in devm_kcalloc(). If "intel,vm-map" does exist there is no need to set the unspecified channels with incremental numbers, because the unspecified channels can't be accessed in pvt_read_in() which is the only other place besides the probe functions that uses pvt->vm_idx[]. This change fixes the bug by moving the incremental channel numbers setting to be done only if "intel,vm-map" property is defined (starting loop from 0), and removing 'num = 0'. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-3-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/hwmon/mr75203.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c index 046523d47c29..81ccb4c6fa5c 100644 --- a/drivers/hwmon/mr75203.c +++ b/drivers/hwmon/mr75203.c @@ -594,7 +594,12 @@ static int mr75203_probe(struct platform_device *pdev) ret = device_property_read_u8_array(dev, "intel,vm-map", pvt->vm_idx, vm_num); if (ret) { - num = 0; + /* + * Incase intel,vm-map property is not defined, we + * assume incremental channel numbers. + */ + for (i = 0; i < vm_num; i++) + pvt->vm_idx[i] = i; } else { for (i = 0; i < vm_num; i++) if (pvt->vm_idx[i] >= vm_num || @@ -604,13 +609,6 @@ static int mr75203_probe(struct platform_device *pdev) } } - /* - * Incase intel,vm-map property is not defined, we assume - * incremental channel numbers. - */ - for (i = num; i < vm_num; i++) - pvt->vm_idx[i] = i; - in_config = devm_kcalloc(dev, num + 1, sizeof(*in_config), GFP_KERNEL); if (!in_config) -- 2.25.1
From: Eliav Farber <farbere@amazon.com> stable inclusion from stable-v5.10.143 commit 8e8dc8fc53a8bc428a009438ff0608cf0ac079d1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit bb9195bd6664d94d71647631593e09f705ff5edd ] This issue is relevant when "intel,vm-map" is set in device-tree, and defines a lower number of VMs than actually supported. This change is needed for all places that use pvt->v_num or vm_num later on in the code. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-4-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/hwmon/mr75203.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c index 81ccb4c6fa5c..62df0c9498f3 100644 --- a/drivers/hwmon/mr75203.c +++ b/drivers/hwmon/mr75203.c @@ -605,6 +605,8 @@ static int mr75203_probe(struct platform_device *pdev) if (pvt->vm_idx[i] >= vm_num || pvt->vm_idx[i] == 0xff) { num = i; + pvt->v_num = i; + vm_num = i; break; } } -- 2.25.1
From: Eliav Farber <farbere@amazon.com> stable inclusion from stable-v5.10.143 commit 19841592aea64b0c44cea9eea37a65e0b0bfc03e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 227a3a2fc31d8e4bb9c88d4804e19530af245b1b ] According to Moortec Embedded Voltage Monitor (MEVM) series 3 data sheet, the minimum input signal is -100mv and maximum input signal is +1000mv. The equation used to convert the digital word to voltage uses mixed types (*val signed and n unsigned), and on 64 bit machines also has different size, since sizeof(u32) = 4 and sizeof(long) = 8. So when measuring a negative input, n will be small enough, such that PVT_N_CONST * n < PVT_R_CONST, and the result of (PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive 32 bit number. Then when storing the result in *val it will be the same value just in 64 bit (instead of it representing a negative number which will what happen when sizeof(long) = 4). When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1 dividing the number by 1024 should result of in 0, but because ">> 10" is used, and the sign bit is used to fill the vacated bit positions, it results in -1 (0xf...fffff) which is wrong. This change fixes the sign problem and supports negative values by casting n to long and replacing the shift right with div operation. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-5-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/hwmon/mr75203.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c index 62df0c9498f3..8211d463495d 100644 --- a/drivers/hwmon/mr75203.c +++ b/drivers/hwmon/mr75203.c @@ -201,8 +201,18 @@ static int pvt_read_in(struct device *dev, u32 attr, int channel, long *val) return ret; n &= SAMPLE_DATA_MSK; - /* Convert the N bitstream count into voltage */ - *val = (PVT_N_CONST * n - PVT_R_CONST) >> PVT_CONV_BITS; + /* + * Convert the N bitstream count into voltage. + * To support negative voltage calculation for 64bit machines + * n must be cast to long, since n and *val differ both in + * signedness and in size. + * Division is used instead of right shift, because for signed + * numbers, the sign bit is used to fill the vacated bit + * positions, and if the number is negative, 1 is used. + * BIT(x) may not be used instead of (1 << x) because it's + * unsigned. + */ + *val = (PVT_N_CONST * (long)n - PVT_R_CONST) / (1 << PVT_CONV_BITS); return 0; default: -- 2.25.1
From: Eliav Farber <farbere@amazon.com> stable inclusion from stable-v5.10.143 commit c9da73ae78cbed0ff3da955dc2cc637d8b72b63b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 91a9e063cdcfca8fe642b078d6fae4ce49187975 ] Fix voltage allocation and reading to support all channels in all VMs. Prior to this change allocation and reading were done only for the first channel in each VM. This change counts the total number of channels for allocation, and takes into account the channel offset when reading the sample data register. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-6-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/hwmon/mr75203.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c index 8211d463495d..87a14713e124 100644 --- a/drivers/hwmon/mr75203.c +++ b/drivers/hwmon/mr75203.c @@ -68,8 +68,9 @@ /* VM Individual Macro Register */ #define VM_COM_REG_SIZE 0x200 -#define VM_SDIF_DONE(n) (VM_COM_REG_SIZE + 0x34 + 0x200 * (n)) -#define VM_SDIF_DATA(n) (VM_COM_REG_SIZE + 0x40 + 0x200 * (n)) +#define VM_SDIF_DONE(vm) (VM_COM_REG_SIZE + 0x34 + 0x200 * (vm)) +#define VM_SDIF_DATA(vm, ch) \ + (VM_COM_REG_SIZE + 0x40 + 0x200 * (vm) + 0x4 * (ch)) /* SDA Slave Register */ #define IP_CTRL 0x00 @@ -115,6 +116,7 @@ struct pvt_device { u32 t_num; u32 p_num; u32 v_num; + u32 c_num; u32 ip_freq; u8 *vm_idx; }; @@ -178,14 +180,15 @@ static int pvt_read_in(struct device *dev, u32 attr, int channel, long *val) { struct pvt_device *pvt = dev_get_drvdata(dev); struct regmap *v_map = pvt->v_map; + u8 vm_idx, ch_idx; u32 n, stat; - u8 vm_idx; int ret; - if (channel >= pvt->v_num) + if (channel >= pvt->v_num * pvt->c_num) return -EINVAL; - vm_idx = pvt->vm_idx[channel]; + vm_idx = pvt->vm_idx[channel / pvt->c_num]; + ch_idx = channel % pvt->c_num; switch (attr) { case hwmon_in_input: @@ -196,7 +199,7 @@ static int pvt_read_in(struct device *dev, u32 attr, int channel, long *val) if (ret) return ret; - ret = regmap_read(v_map, VM_SDIF_DATA(vm_idx), &n); + ret = regmap_read(v_map, VM_SDIF_DATA(vm_idx, ch_idx), &n); if(ret < 0) return ret; @@ -509,8 +512,8 @@ static int pvt_reset_control_deassert(struct device *dev, struct pvt_device *pvt static int mr75203_probe(struct platform_device *pdev) { + u32 ts_num, vm_num, pd_num, ch_num, val, index, i; const struct hwmon_channel_info **pvt_info; - u32 ts_num, vm_num, pd_num, val, index, i; struct device *dev = &pdev->dev; u32 *temp_config, *in_config; struct device *hwmon_dev; @@ -551,9 +554,11 @@ static int mr75203_probe(struct platform_device *pdev) ts_num = (val & TS_NUM_MSK) >> TS_NUM_SFT; pd_num = (val & PD_NUM_MSK) >> PD_NUM_SFT; vm_num = (val & VM_NUM_MSK) >> VM_NUM_SFT; + ch_num = (val & CH_NUM_MSK) >> CH_NUM_SFT; pvt->t_num = ts_num; pvt->p_num = pd_num; pvt->v_num = vm_num; + pvt->c_num = ch_num; val = 0; if (ts_num) val++; @@ -590,7 +595,7 @@ static int mr75203_probe(struct platform_device *pdev) } if (vm_num) { - u32 num = vm_num; + u32 total_ch; ret = pvt_get_regmap(pdev, "vm", pvt); if (ret) @@ -614,20 +619,20 @@ static int mr75203_probe(struct platform_device *pdev) for (i = 0; i < vm_num; i++) if (pvt->vm_idx[i] >= vm_num || pvt->vm_idx[i] == 0xff) { - num = i; pvt->v_num = i; vm_num = i; break; } } - in_config = devm_kcalloc(dev, num + 1, + total_ch = ch_num * vm_num; + in_config = devm_kcalloc(dev, total_ch + 1, sizeof(*in_config), GFP_KERNEL); if (!in_config) return -ENOMEM; - memset32(in_config, HWMON_I_INPUT, num); - in_config[num] = 0; + memset32(in_config, HWMON_I_INPUT, total_ch); + in_config[total_ch] = 0; pvt_in.config = in_config; pvt_info[index++] = &pvt_in; -- 2.25.1
From: Eliav Farber <farbere@amazon.com> stable inclusion from stable-v5.10.143 commit 202341395ce3af1eb08469ae53bc1d591cb7f1bb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0U6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e43212e0f55dc2d6b15d6c174cc0a64b25fab5e7 ] Configure ip-polling register to enable polling for all voltage monitor channels. This enables reading the voltage values for all inputs other than just input 0. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-7-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/hwmon/mr75203.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c index 87a14713e124..41e3d3b54baf 100644 --- a/drivers/hwmon/mr75203.c +++ b/drivers/hwmon/mr75203.c @@ -398,6 +398,19 @@ static int pvt_init(struct pvt_device *pvt) if (ret) return ret; + val = (BIT(pvt->c_num) - 1) | VM_CH_INIT | + IP_POLL << SDIF_ADDR_SFT | SDIF_WRN_W | SDIF_PROG; + ret = regmap_write(v_map, SDIF_W, val); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(v_map, SDIF_STAT, + val, !(val & SDIF_BUSY), + PVT_POLL_DELAY_US, + PVT_POLL_TIMEOUT_US); + if (ret) + return ret; + val = CFG1_VOL_MEAS_MODE | CFG1_PARALLEL_OUT | CFG1_14_BIT | IP_CFG << SDIF_ADDR_SFT | SDIF_WRN_W | SDIF_PROG; -- 2.25.1
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> stable inclusion from stable-v5.10.144 commit a381cac2ab080944893b096570dd4b324be87e26 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit ba9fe460dc2cfe90dc115b22af14dd3f13cffa0f ] The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Stable-dep-of: af7d78c95701 ("ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm/boot/dts/imx28-evk.dts | 2 +- arch/arm/boot/dts/imx28-m28evk.dts | 2 +- arch/arm/boot/dts/imx28-sps1.dts | 2 +- arch/arm/boot/dts/imx6dl-rex-basic.dts | 2 +- arch/arm/boot/dts/imx6q-ba16.dtsi | 2 +- arch/arm/boot/dts/imx6q-bx50v3.dtsi | 2 +- arch/arm/boot/dts/imx6q-cm-fx6.dts | 2 +- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- arch/arm/boot/dts/imx6q-dms-ba16.dts | 2 +- arch/arm/boot/dts/imx6q-gw5400-a.dts | 2 +- arch/arm/boot/dts/imx6q-marsboard.dts | 2 +- arch/arm/boot/dts/imx6q-rex-pro.dts | 2 +- arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +- arch/arm/boot/dts/imx6sl-evk.dts | 2 +- arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 2 +- arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ++-- arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++-- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 +- arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi | 2 +- arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi | 2 +- arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi | 2 +- arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi | 2 +- 32 files changed, 34 insertions(+), 34 deletions(-) diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 7e2b0f198dfa..1053b7c584d8 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -129,7 +129,7 @@ ssp2: spi@80014000 { pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf016b", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index f3bddc5ada4b..13acdc7916b9 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -33,7 +33,7 @@ ssp2: spi@80014000 { pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 43be7a6a769b..90928db0df70 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -51,7 +51,7 @@ ssp2: spi@80014000 { pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "everspin,mr25h256", "mr25h256"; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index 0f1616bfa9a8..b72f8ea1e6f6 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -19,7 +19,7 @@ memory@10000000 { }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index e4578ed3371e..133991ca8c63 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -139,7 +139,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: n25q032@0 { + flash: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 2a98cc657595..66be04299cbf 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -160,7 +160,7 @@ &ecspi5 { pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25"; spi-max-frequency = <10000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index bfb530f29d9d..1ad41c944b4b 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -260,7 +260,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index fa2307d8ce86..4dee1b22d5c1 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -102,7 +102,7 @@ &ecspi5 { cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts index 48fb47e715f6..137db38f0d27 100644 --- a/arch/arm/boot/dts/imx6q-dms-ba16.dts +++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts @@ -47,7 +47,7 @@ &ecspi5 { pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25256B", "atmel,at25"; spi-max-frequency = <20000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 4cde45d5c90c..e894faba571f 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -137,7 +137,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index 05ee28388229..cc1801002394 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -100,7 +100,7 @@ &ecspi1 { cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index 1767e1a3cd53..271f4b2d9b9f 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -19,7 +19,7 @@ memory@10000000 { }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf032b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index e21f6ac864e5..baa197c90060 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -96,7 +96,7 @@ &ecspi4 { pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index ead7ba27e105..ff8cb47fb9fd 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -131,7 +131,7 @@ &ecspi4 { pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 648f5fcb72e6..2c1d6f28e695 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -35,7 +35,7 @@ &ecspi3 { pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf040b", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index e9a4115124eb..02ab8a59df23 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -248,7 +248,7 @@ &ecspi4 { status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ - smarc_flash: spi-flash@0 { + smarc_flash: flash@0 { compatible = "winbond,w25q16dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index d526f01a2c52..b7e74d859a96 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -179,7 +179,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index a0917823c244..a88323ac6c69 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -321,7 +321,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 92d09a3ebe0e..ee7e2371f94b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -252,7 +252,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 1243677b5f97..5adeb7aed220 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -237,7 +237,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index afe477f32984..17535bf12516 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -272,7 +272,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; status = "disabled"; /* pin conflict with WEIM NOR */ - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index fdc3aa9d544d..0aa1a0a28de0 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -313,7 +313,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index f824c9abd11a..758c62fb9cac 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -194,7 +194,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 25f6f2fb1555..f16c830f1e91 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -137,7 +137,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 66af78e83b70..a2c79bcf9a11 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -107,7 +107,7 @@ &ecspi1 { pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index dce5dcf96c25..7dda42553f4b 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -123,7 +123,7 @@ &qspi2 { pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: s25fl128s@0 { + flash0: flash@0 { reg = <0>; #address-cells = <1>; #size-cells = <1>; @@ -133,7 +133,7 @@ flash0: s25fl128s@0 { spi-tx-bus-width = <4>; }; - flash1: s25fl128s@2 { + flash1: flash@2 { reg = <2>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 5a63ca615722..1b808563a536 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -108,7 +108,7 @@ &qspi2 { pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; @@ -118,7 +118,7 @@ flash0: n25q256a@0 { reg = <0>; }; - flash1: n25q256a@2 { + flash1: flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 64c2d1e9f7fc..71d3c7e05e08 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -239,7 +239,7 @@ &qspi { pinctrl-0 = <&pinctrl_qspi>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi index 47d3ce5d255f..acd936540d89 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi @@ -19,7 +19,7 @@ memory@80000000 { }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi index a095a7654ac6..29ed38dce580 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi @@ -18,7 +18,7 @@ memory@80000000 { }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi index 2a449a3c1ae2..09a83dbdf651 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -19,7 +19,7 @@ &ecspi2 { pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi index b7e984284e1a..d000606c0704 100644 --- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi @@ -18,7 +18,7 @@ memory@80000000 { }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; -- 2.25.1
From: Marco Felsch <m.felsch@pengutronix.de> stable inclusion from stable-v5.10.144 commit 5ce1b0a0c27cd38ee908e5ac581ead717943632b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit af7d78c957017f8b3a0986769f6f18e57f9362ea ] Drop the "winbond,w25q16dw" compatible since it causes to set the MODALIAS to w25q16dw which is not specified within spi-nor id table. Fix this by use the common "jedec,spi-nor" compatible. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 02ab8a59df23..37d94aa45a8b 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -249,7 +249,7 @@ &ecspi4 { /* default boot source: workaround #1 for errata ERR006282 */ smarc_flash: flash@0 { - compatible = "winbond,w25q16dw", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; -- 2.25.1
From: Lu Baolu <baolu.lu@linux.intel.com> stable inclusion from stable-v5.10.144 commit 0a81ddfc20cce49606c1aadc8c6171cb1d4fe273 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 53fc7ad6edf210b497230ce74b61b322a202470c ] The Intel IOMMU driver possibly selects between the first-level and the second-level translation tables for DMA address translation. However, the levels of page-table walks for the 4KB base page size are calculated from the SAGAW field of the capability register, which is only valid for the second-level page table. This causes the IOMMU driver to stop working if the hardware (or the emulated IOMMU) advertises only first-level translation capability and reports the SAGAW field as 0. This solves the above problem by considering both the first level and the second level when calculating the supported page table levels. Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level") Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220817023558.3253263-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/iommu/intel/iommu.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 27b3f4dade33..c92e7adfd958 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -560,14 +560,36 @@ static inline int domain_pfn_supported(struct dmar_domain *domain, return !(addr_width < BITS_PER_LONG && pfn >> addr_width); } +/* + * Calculate the Supported Adjusted Guest Address Widths of an IOMMU. + * Refer to 11.4.2 of the VT-d spec for the encoding of each bit of + * the returned SAGAW. + */ +static unsigned long __iommu_calculate_sagaw(struct intel_iommu *iommu) +{ + unsigned long fl_sagaw, sl_sagaw; + + fl_sagaw = BIT(2) | (cap_fl1gp_support(iommu->cap) ? BIT(3) : 0); + sl_sagaw = cap_sagaw(iommu->cap); + + /* Second level only. */ + if (!sm_supported(iommu) || !ecap_flts(iommu->ecap)) + return sl_sagaw; + + /* First level only. */ + if (!ecap_slts(iommu->ecap)) + return fl_sagaw; + + return fl_sagaw & sl_sagaw; +} + static int __iommu_calculate_agaw(struct intel_iommu *iommu, int max_gaw) { unsigned long sagaw; int agaw = -1; - sagaw = cap_sagaw(iommu->cap); - for (agaw = width_to_agaw(max_gaw); - agaw >= 0; agaw--) { + sagaw = __iommu_calculate_sagaw(iommu); + for (agaw = width_to_agaw(max_gaw); agaw >= 0; agaw--) { if (test_bit(agaw, &sagaw)) break; } -- 2.25.1
From: Brian Norris <briannorris@chromium.org> stable inclusion from stable-v5.10.144 commit 218b71e32f9ab343755deb64e4fdf51544dd12fd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 47311db8e8f33011d90dee76b39c8886120cdda4 ] Users may have explicitly configured their tracefs permissions; we shouldn't overwrite those just because a second mount appeared. Only clobber if the options were provided at mount time. Note: the previous behavior was especially surprising in the presence of automounted /sys/kernel/debug/tracing/. Existing behavior: ## Pre-existing status: tracefs is 0755. # stat -c '%A' /sys/kernel/tracing/ drwxr-xr-x ## (Re)trigger the automount. # umount /sys/kernel/debug/tracing # stat -c '%A' /sys/kernel/debug/tracing/. drwx------ ## Unexpected: the automount changed mode for other mount instances. # stat -c '%A' /sys/kernel/tracing/ drwx------ New behavior (after this change): ## Pre-existing status: tracefs is 0755. # stat -c '%A' /sys/kernel/tracing/ drwxr-xr-x ## (Re)trigger the automount. # umount /sys/kernel/debug/tracing # stat -c '%A' /sys/kernel/debug/tracing/. drwxr-xr-x ## Expected: the automount does not change other mount instances. # stat -c '%A' /sys/kernel/tracing/ drwxr-xr-x Link: https://lkml.kernel.org/r/20220826174353.2.Iab6e5ea57963d6deca5311b27fb72267... Cc: stable@vger.kernel.org Fixes: 4282d60689d4f ("tracefs: Add new tracefs file system") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/tracefs/inode.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c index 8b7315c22f0d..4b7057136852 100644 --- a/fs/tracefs/inode.c +++ b/fs/tracefs/inode.c @@ -139,6 +139,8 @@ struct tracefs_mount_opts { kuid_t uid; kgid_t gid; umode_t mode; + /* Opt_* bitfield. */ + unsigned int opts; }; enum { @@ -239,6 +241,7 @@ static int tracefs_parse_options(char *data, struct tracefs_mount_opts *opts) kgid_t gid; char *p; + opts->opts = 0; opts->mode = TRACEFS_DEFAULT_MODE; while ((p = strsep(&data, ",")) != NULL) { @@ -273,24 +276,36 @@ static int tracefs_parse_options(char *data, struct tracefs_mount_opts *opts) * but traditionally tracefs has ignored all mount options */ } + + opts->opts |= BIT(token); } return 0; } -static int tracefs_apply_options(struct super_block *sb) +static int tracefs_apply_options(struct super_block *sb, bool remount) { struct tracefs_fs_info *fsi = sb->s_fs_info; struct inode *inode = sb->s_root->d_inode; struct tracefs_mount_opts *opts = &fsi->mount_opts; - inode->i_mode &= ~S_IALLUGO; - inode->i_mode |= opts->mode; + /* + * On remount, only reset mode/uid/gid if they were provided as mount + * options. + */ + + if (!remount || opts->opts & BIT(Opt_mode)) { + inode->i_mode &= ~S_IALLUGO; + inode->i_mode |= opts->mode; + } - inode->i_uid = opts->uid; + if (!remount || opts->opts & BIT(Opt_uid)) + inode->i_uid = opts->uid; - /* Set all the group ids to the mount option */ - set_gid(sb->s_root, opts->gid); + if (!remount || opts->opts & BIT(Opt_gid)) { + /* Set all the group ids to the mount option */ + set_gid(sb->s_root, opts->gid); + } return 0; } @@ -305,7 +320,7 @@ static int tracefs_remount(struct super_block *sb, int *flags, char *data) if (err) goto fail; - tracefs_apply_options(sb); + tracefs_apply_options(sb, true); fail: return err; @@ -357,7 +372,7 @@ static int trace_fill_super(struct super_block *sb, void *data, int silent) sb->s_op = &tracefs_super_operations; - tracefs_apply_options(sb); + tracefs_apply_options(sb, false); return 0; -- 2.25.1
From: Ondrej Jirman <megi@xff.cz> stable inclusion from stable-v5.10.144 commit fac2c299efc69afc10cd231a5e52f1a7bd788fa5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 425fe4709c76e35f93f4c0e50240f0b61b2a2e54 ] This controller is used by PinePhone and PinePhone Pro. Support for the PinePhone Pro will be added in a later patch set. Signed-off-by: Ondrej Jirman <megi@xff.cz> Signed-off-by: Jarrah Gosbell <kernel@undef.tools> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220809091200.290492-1-kernel@undef.tools Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/input/touchscreen/goodix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 5fc789f717c8..1c03cbbab133 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -154,6 +154,7 @@ static const struct goodix_chip_data gt9x_chip_data = { static const struct goodix_chip_id goodix_chip_ids[] = { { .id = "1151", .data = >1x_chip_data }, + { .id = "1158", .data = >1x_chip_data }, { .id = "5663", .data = >1x_chip_data }, { .id = "5688", .data = >1x_chip_data }, { .id = "917S", .data = >1x_chip_data }, -- 2.25.1
From: Rob Clark <robdclark@chromium.org> stable inclusion from stable-v5.10.144 commit cff2b3a50c69c0c72593f87190c88d0235df6503 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 174974d8463b77c2b4065e98513adb204e64de7d ] If the previous thing cat'ing $debugfs/rd left the FIFO full, then subsequent open could deadlock in rd_write() (because open is blocked, not giving a chance for read() to consume any data in the FIFO). Also it is generally a good idea to clear out old data from the FIFO. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/496706/ Link: https://lore.kernel.org/r/20220807160901.2353471-2-robdclark@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/msm/msm_rd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c index fea30e7aa9e8..084b6ae2a476 100644 --- a/drivers/gpu/drm/msm/msm_rd.c +++ b/drivers/gpu/drm/msm/msm_rd.c @@ -191,6 +191,9 @@ static int rd_open(struct inode *inode, struct file *file) file->private_data = rd; rd->open = true; + /* Reset fifo to clear any previously unread data: */ + rd->fifo.head = rd->fifo.tail = 0; + /* the parsing tools need to know gpu-id to know which * register database to load. */ -- 2.25.1
From: Jason Wang <wangborong@cdjrlc.com> stable inclusion from stable-v5.10.144 commit ef033e619e4d219b627adb7f1138530300a0d5c6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 94553f8a218540d676efbf3f7827ed493d1057cf ] The double `like' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/hid/intel-ish-hid/ishtp-hid.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/intel-ish-hid/ishtp-hid.h b/drivers/hid/intel-ish-hid/ishtp-hid.h index 5ffd0da3cf1f..65af0ebef79f 100644 --- a/drivers/hid/intel-ish-hid/ishtp-hid.h +++ b/drivers/hid/intel-ish-hid/ishtp-hid.h @@ -110,7 +110,7 @@ struct report_list { * @multi_packet_cnt: Count of fragmented packet count * * This structure is used to store completion flags and per client data like - * like report description, number of HID devices etc. + * report description, number of HID devices etc. */ struct ishtp_cl_data { /* completion flags */ -- 2.25.1
From: Even Xu <even.xu@intel.com> stable inclusion from stable-v5.10.144 commit 704d1f2ac6dce37e8ae305edc3d9813d32a92e9d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e1fa076706209cc447d7a2abd0843a18277e5ef7 ] There is a timing issue captured during ishtp client sending stress tests. It was observed during stress tests that ISH firmware is getting out of ordered messages. This is a rare scenario as the current set of ISH client drivers don't send much data to firmware. But this may not be the case going forward. When message size is bigger than IPC MTU, ishtp splits the message into fragments and uses serialized async method to send message fragments. The call stack: ishtp_cl_send_msg_ipc->ipc_tx_callback(first fregment)-> ishtp_send_msg(with callback)->write_ipc_to_queue-> write_ipc_from_queue->callback->ipc_tx_callback(next fregment)...... When an ipc write complete interrupt is received, driver also calls write_ipc_from_queue->ipc_tx_callback in ISR to start sending of next fragment. Through ipc_tx_callback uses spin_lock to protect message splitting, as the serialized sending method will call back to ipc_tx_callback again, so it doesn't put sending under spin_lock, it causes driver cannot guarantee all fragments be sent in order. Considering this scenario: ipc_tx_callback just finished a fragment splitting, and not call ishtp_send_msg yet, there is a write complete interrupt happens, then ISR->write_ipc_from_queue ->ipc_tx_callback->ishtp_send_msg->write_ipc_to_queue...... Because ISR has higher exec priority than normal thread, this causes the new fragment be sent out before previous fragment. This disordered message causes invalid message to firmware. The solution is, to send fragments synchronously: Use ishtp_write_message writing fragments into tx queue directly one by one, instead of ishtp_send_msg only writing one fragment with completion callback. As no completion callback be used, so change ipc_tx_callback to ipc_tx_send. Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/hid/intel-ish-hid/ishtp/client.c | 68 ++++++++++++++---------- 1 file changed, 39 insertions(+), 29 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ishtp/client.c b/drivers/hid/intel-ish-hid/ishtp/client.c index 1cc157126fce..c0d69303e3b0 100644 --- a/drivers/hid/intel-ish-hid/ishtp/client.c +++ b/drivers/hid/intel-ish-hid/ishtp/client.c @@ -626,13 +626,14 @@ static void ishtp_cl_read_complete(struct ishtp_cl_rb *rb) } /** - * ipc_tx_callback() - IPC tx callback function + * ipc_tx_send() - IPC tx send function * @prm: Pointer to client device instance * - * Send message over IPC either first time or on callback on previous message - * completion + * Send message over IPC. Message will be split into fragments + * if message size is bigger than IPC FIFO size, and all + * fragments will be sent one by one. */ -static void ipc_tx_callback(void *prm) +static void ipc_tx_send(void *prm) { struct ishtp_cl *cl = prm; struct ishtp_cl_tx_ring *cl_msg; @@ -677,32 +678,41 @@ static void ipc_tx_callback(void *prm) list); rem = cl_msg->send_buf.size - cl->tx_offs; - ishtp_hdr.host_addr = cl->host_client_id; - ishtp_hdr.fw_addr = cl->fw_client_id; - ishtp_hdr.reserved = 0; - pmsg = cl_msg->send_buf.data + cl->tx_offs; + while (rem > 0) { + ishtp_hdr.host_addr = cl->host_client_id; + ishtp_hdr.fw_addr = cl->fw_client_id; + ishtp_hdr.reserved = 0; + pmsg = cl_msg->send_buf.data + cl->tx_offs; + + if (rem <= dev->mtu) { + /* Last fragment or only one packet */ + ishtp_hdr.length = rem; + ishtp_hdr.msg_complete = 1; + /* Submit to IPC queue with no callback */ + ishtp_write_message(dev, &ishtp_hdr, pmsg); + cl->tx_offs = 0; + cl->sending = 0; - if (rem <= dev->mtu) { - ishtp_hdr.length = rem; - ishtp_hdr.msg_complete = 1; - cl->sending = 0; - list_del_init(&cl_msg->list); /* Must be before write */ - spin_unlock_irqrestore(&cl->tx_list_spinlock, tx_flags); - /* Submit to IPC queue with no callback */ - ishtp_write_message(dev, &ishtp_hdr, pmsg); - spin_lock_irqsave(&cl->tx_free_list_spinlock, tx_free_flags); - list_add_tail(&cl_msg->list, &cl->tx_free_list.list); - ++cl->tx_ring_free_size; - spin_unlock_irqrestore(&cl->tx_free_list_spinlock, - tx_free_flags); - } else { - /* Send IPC fragment */ - spin_unlock_irqrestore(&cl->tx_list_spinlock, tx_flags); - cl->tx_offs += dev->mtu; - ishtp_hdr.length = dev->mtu; - ishtp_hdr.msg_complete = 0; - ishtp_send_msg(dev, &ishtp_hdr, pmsg, ipc_tx_callback, cl); + break; + } else { + /* Send ipc fragment */ + ishtp_hdr.length = dev->mtu; + ishtp_hdr.msg_complete = 0; + /* All fregments submitted to IPC queue with no callback */ + ishtp_write_message(dev, &ishtp_hdr, pmsg); + cl->tx_offs += dev->mtu; + rem = cl_msg->send_buf.size - cl->tx_offs; + } } + + list_del_init(&cl_msg->list); + spin_unlock_irqrestore(&cl->tx_list_spinlock, tx_flags); + + spin_lock_irqsave(&cl->tx_free_list_spinlock, tx_free_flags); + list_add_tail(&cl_msg->list, &cl->tx_free_list.list); + ++cl->tx_ring_free_size; + spin_unlock_irqrestore(&cl->tx_free_list_spinlock, + tx_free_flags); } /** @@ -720,7 +730,7 @@ static void ishtp_cl_send_msg_ipc(struct ishtp_device *dev, return; cl->tx_offs = 0; - ipc_tx_callback(cl); + ipc_tx_send(cl); ++cl->send_msg_cnt_ipc; } -- 2.25.1
From: Kai-Heng Feng <kai.heng.feng@canonical.com> stable inclusion from stable-v5.10.144 commit 1b8b5384e83a0ae0bcbcca7c8bbfcbed1bd97406 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2ca1c94ce0b65a2ce7512b718f3d8a0fe6224bca ] Commit d60cd06331a3 ("PM: ACPI: reboot: Use S5 for reboot") caused a reboot hang on one Dell servers so the commit was reverted. Someone managed to collect the AER log and it's caused by MSI: [ 148.762067] ACPI: Preparing to enter system sleep state S5 [ 148.794638] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5 [ 148.803731] {1}[Hardware Error]: event severity: recoverable [ 148.810191] {1}[Hardware Error]: Error 0, type: fatal [ 148.816088] {1}[Hardware Error]: section_type: PCIe error [ 148.822391] {1}[Hardware Error]: port_type: 0, PCIe end point [ 148.829026] {1}[Hardware Error]: version: 3.0 [ 148.834266] {1}[Hardware Error]: command: 0x0006, status: 0x0010 [ 148.841140] {1}[Hardware Error]: device_id: 0000:04:00.0 [ 148.847309] {1}[Hardware Error]: slot: 0 [ 148.852077] {1}[Hardware Error]: secondary_bus: 0x00 [ 148.857876] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f [ 148.865145] {1}[Hardware Error]: class_code: 020000 [ 148.870845] {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00010000 [ 148.879842] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030 [ 148.886575] {1}[Hardware Error]: TLP Header: 40000001 0000030f 90028090 00000000 [ 148.894823] tg3 0000:04:00.0: AER: aer_status: 0x00100000, aer_mask: 0x00010000 [ 148.902795] tg3 0000:04:00.0: AER: [20] UnsupReq (First) [ 148.910234] tg3 0000:04:00.0: AER: aer_layer=Transaction Layer, aer_agent=Requester ID [ 148.918806] tg3 0000:04:00.0: AER: aer_uncor_severity: 0x000ef030 [ 148.925558] tg3 0000:04:00.0: AER: TLP Header: 40000001 0000030f 90028090 00000000 The MSI is probably raised by incoming packets, so power down the device and disable bus mastering to stop the traffic, as user confirmed this approach works. In addition to that, be extra safe and cancel reset task if it's running. Cc: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/all/b8db79e6857c41dab4ef08bdf826ea7c47e3bafc.1615947... BugLink: https://bugs.launchpad.net/bugs/1917471 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220826002530.1153296-1-kai.heng.feng@canonical.c... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/broadcom/tg3.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 1d93333f552a..9eb716acac04 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -18158,16 +18158,20 @@ static void tg3_shutdown(struct pci_dev *pdev) struct net_device *dev = pci_get_drvdata(pdev); struct tg3 *tp = netdev_priv(dev); + tg3_reset_task_cancel(tp); + rtnl_lock(); + netif_device_detach(dev); if (netif_running(dev)) dev_close(dev); - if (system_state == SYSTEM_POWER_OFF) - tg3_power_down(tp); + tg3_power_down(tp); rtnl_unlock(); + + pci_disable_device(pdev); } /** -- 2.25.1
From: Wei Yongjun <weiyongjun1@huawei.com> stable inclusion from stable-v5.10.144 commit 3815e66c2183f3430490e450ba16779cf5214ec6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 303e6da99429510b1e4edf833afe90ac8542e747 ] GPIO mockup debugfs is created in gpio_mockup_probe() but forgot to remove when remove device. This patch add a devm managed callback for removing them. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpio/gpio-mockup.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c index 67ed4f238d43..780cba4e30d0 100644 --- a/drivers/gpio/gpio-mockup.c +++ b/drivers/gpio/gpio-mockup.c @@ -375,6 +375,13 @@ static void gpio_mockup_debugfs_setup(struct device *dev, } } +static void gpio_mockup_debugfs_cleanup(void *data) +{ + struct gpio_mockup_chip *chip = data; + + debugfs_remove_recursive(chip->dbg_dir); +} + static void gpio_mockup_dispose_mappings(void *data) { struct gpio_mockup_chip *chip = data; @@ -457,7 +464,7 @@ static int gpio_mockup_probe(struct platform_device *pdev) gpio_mockup_debugfs_setup(dev, chip); - return 0; + return devm_add_action_or_reset(dev, gpio_mockup_debugfs_cleanup, chip); } static struct platform_driver gpio_mockup_driver = { -- 2.25.1
From: Li Qiong <liqiong@nfschina.com> stable inclusion from stable-v5.10.144 commit de2aa495230bee743ebdabfe02a376ce24713886 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit ffd7bdddaab193c38416fd5dd416d065517d266e ] The rc code is 0 at the error path "status & CC2520_STATUS_TX_UNDERFLOW". Assign rc code with '-EINVAL' at this error path to fix it. Signed-off-by: Li Qiong <liqiong@nfschina.com> Link: https://lore.kernel.org/r/20220829071259.18330-1-liqiong@nfschina.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ieee802154/cc2520.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c index 89c046b204e0..4517517215f2 100644 --- a/drivers/net/ieee802154/cc2520.c +++ b/drivers/net/ieee802154/cc2520.c @@ -504,6 +504,7 @@ cc2520_tx(struct ieee802154_hw *hw, struct sk_buff *skb) goto err_tx; if (status & CC2520_STATUS_TX_UNDERFLOW) { + rc = -EINVAL; dev_err(&priv->spi->dev, "cc2520 tx underflow exception\n"); goto err_tx; } -- 2.25.1
From: Greg Tulli <greg.iforce@gmail.com> stable inclusion from stable-v5.10.144 commit 1cae6f8e17657c06e55f9c80dcc739b5dc959f68 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 9c9c71168f7979f3798b61c65b4530fbfbcf19d1 ] Add a new iforce_device entry to support the Boeder Force Feedback Wheel device. Signed-off-by: Greg Tulli <greg.iforce@gmail.com> Link: https://lore.kernel.org/r/3256420-c8ac-31b-8499-3c488a9880fd@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- Documentation/input/joydev/joystick.rst | 1 + drivers/input/joystick/iforce/iforce-main.c | 1 + 2 files changed, 2 insertions(+) diff --git a/Documentation/input/joydev/joystick.rst b/Documentation/input/joydev/joystick.rst index 9746fd76cc58..f38c330c028e 100644 --- a/Documentation/input/joydev/joystick.rst +++ b/Documentation/input/joydev/joystick.rst @@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes: * AVB Mag Turbo Force * AVB Top Shot Pegasus * AVB Top Shot Force Feedback Racing Wheel +* Boeder Force Feedback Wheel * Logitech WingMan Force * Logitech WingMan Force Wheel * Guillemot Race Leader Force Feedback diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index b2a68bc9f0b4..b86de1312512 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -50,6 +50,7 @@ static struct iforce_device iforce_device[] = { { 0x046d, 0xc291, "Logitech WingMan Formula Force", btn_wheel, abs_wheel, ff_iforce }, { 0x05ef, 0x020a, "AVB Top Shot Pegasus", btn_joystick_avb, abs_avb_pegasus, ff_iforce }, { 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_wheel, abs_wheel, ff_iforce }, + { 0x05ef, 0x8886, "Boeder Force Feedback Wheel", btn_wheel, abs_wheel, ff_iforce }, { 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //? { 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //? { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, -- 2.25.1
From: Maurizio Lombardi <mlombard@redhat.com> stable inclusion from stable-v5.10.144 commit c598e2704c3b315078c07d97cec02573bfe1fa7e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 478814a5584197fa1fb18377653626e3416e7cd6 ] TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing so we can ignore them and avoid printing the "unhandled state" warning message. [ 1298.852386] nvmet_tcp: queue 2 unhandled state 5 [ 1298.879112] nvmet_tcp: queue 7 unhandled state 5 [ 1298.884253] nvmet_tcp: queue 8 unhandled state 5 [ 1298.889475] nvmet_tcp: queue 9 unhandled state 5 v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore the fin_wait2 and last_ack states. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/nvme/target/tcp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index d030d5e69dc5..e3e35b9bd684 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -1471,6 +1471,9 @@ static void nvmet_tcp_state_change(struct sock *sk) goto done; switch (sk->sk_state) { + case TCP_FIN_WAIT2: + case TCP_LAST_ACK: + break; case TCP_FIN_WAIT1: case TCP_CLOSE_WAIT: case TCP_CLOSE: -- 2.25.1
From: Chengming Gui <Jack.Gui@amd.com> stable inclusion from stable-v5.10.144 commit 187908079d94673b01fbd63d7251bfab4341e7cb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 39c84b8e929dbd4f63be7e04bf1a2bcd92b44177 ] Restrict the ucode loading check to avoid frontdoor loading error. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c index ae84d3b582aa..8a2abcfd5a88 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c @@ -1921,7 +1921,7 @@ static int psp_load_smu_fw(struct psp_context *psp) static bool fw_load_skip_check(struct psp_context *psp, struct amdgpu_firmware_info *ucode) { - if (!ucode->fw) + if (!ucode->fw || !ucode->ucode_size) return true; if (ucode->ucode_id == AMDGPU_UCODE_ID_SMC && -- 2.25.1
From: Yu Zhe <yuzhe@nfschina.com> stable inclusion from stable-v5.10.144 commit fc2c14c2cde931d2fb8fc24a2c5dc3c22504eb19 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 6bb0d64c100091e131cd16710b62fda3319cd0af ] The platform_get_irq() returns negative error codes. It can't actually return zero. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Link: https://lore.kernel.org/r/20220825011844.8536-1-yuzhe@nfschina.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/perf/arm_pmu_platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/perf/arm_pmu_platform.c b/drivers/perf/arm_pmu_platform.c index ef9676418c9f..2e1f3680d846 100644 --- a/drivers/perf/arm_pmu_platform.c +++ b/drivers/perf/arm_pmu_platform.c @@ -117,7 +117,7 @@ static int pmu_parse_irqs(struct arm_pmu *pmu) if (num_irqs == 1) { int irq = platform_get_irq(pdev, 0); - if (irq && irq_is_percpu_devid(irq)) + if ((irq > 0) && irq_is_percpu_devid(irq)) return pmu_parse_percpu_irq(pmu, irq); } -- 2.25.1
From: Hans de Goede <hdegoede@redhat.com> stable inclusion from stable-v5.10.144 commit 5ce017619c30ced0701dde095c87350ef39a09e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c3b82d26bc85f5fc2fef5ec8cce17c89633a55a8 ] 2 keymap fixes for the Acer Aspire One AOD270 and the same hardware rebranded as Packard Bell Dot SC: 1. The F2 key is marked with a big '?' symbol on the Packard Bell Dot SC, this sends WMID_HOTKEY_EVENTs with a scancode of 0x27 add a mapping for this. 2. Scancode 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate input event with the "Video Bus" input device events. But on these devices the "Video Bus" does not send events for this key. Map 0x61 to KEY_UNKNOWN instead of using KE_IGNORE so that udev/hwdb can override it on these devs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220829163544.5288-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/platform/x86/acer-wmi.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 80983f9dfcd5..8e696262215f 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -93,6 +93,7 @@ static const struct key_entry acer_wmi_keymap[] __initconst = { {KE_KEY, 0x22, {KEY_PROG2} }, /* Arcade */ {KE_KEY, 0x23, {KEY_PROG3} }, /* P_Key */ {KE_KEY, 0x24, {KEY_PROG4} }, /* Social networking_Key */ + {KE_KEY, 0x27, {KEY_HELP} }, {KE_KEY, 0x29, {KEY_PROG3} }, /* P_Key for TM8372 */ {KE_IGNORE, 0x41, {KEY_MUTE} }, {KE_IGNORE, 0x42, {KEY_PREVIOUSSONG} }, @@ -106,7 +107,13 @@ static const struct key_entry acer_wmi_keymap[] __initconst = { {KE_IGNORE, 0x48, {KEY_VOLUMEUP} }, {KE_IGNORE, 0x49, {KEY_VOLUMEDOWN} }, {KE_IGNORE, 0x4a, {KEY_VOLUMEDOWN} }, - {KE_IGNORE, 0x61, {KEY_SWITCHVIDEOMODE} }, + /* + * 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate input event + * with the "Video Bus" input device events. But sometimes it is not + * a dup. Map it to KEY_UNKNOWN instead of using KE_IGNORE so that + * udev/hwdb can override it on systems where it is not a dup. + */ + {KE_KEY, 0x61, {KEY_UNKNOWN} }, {KE_IGNORE, 0x62, {KEY_BRIGHTNESSUP} }, {KE_IGNORE, 0x63, {KEY_BRIGHTNESSDOWN} }, {KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} }, /* Display Switch */ -- 2.25.1
From: Hu Xiaoying <huxiaoying@kylinos.cn> stable inclusion from stable-v5.10.144 commit dd3aa77d5d72f4c660ae803f515f310251089e94 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c61feaee68b9735be06f162bc046c7f1959efb0c ] USB external storage device(0x0b05:1932), use gnome-disk-utility tools to test usb write < 30MB/s. if does not to load module of uas for this device, can increase the write speed from 20MB/s to >40MB/s. Suggested-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hu Xiaoying <huxiaoying@kylinos.cn> Link: https://lore.kernel.org/r/20220901045737.3438046-1-huxiaoying@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 4051c8cd0cd8..23ab3b048d9b 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -62,6 +62,13 @@ UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_UAS), +/* Reported-by: Tom Hu <huxiaoying@kylinos.cn> */ +UNUSUAL_DEV(0x0b05, 0x1932, 0x0000, 0x9999, + "ASUS", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: David Webb <djw@noc.ac.uk> */ UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, "Seagate", -- 2.25.1
From: Jann Horn <jannh@google.com> stable inclusion from stable-v5.10.144 commit 891f03f688de8418f44b32b88f6b4faed5b2aa81 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- This is a stable-specific patch. I botched the stable-specific rewrite of commit b67fbebd4cf98 ("mmu_gather: Force tlb-flush VM_PFNMAP vmas"): As Hugh pointed out, unmap_region() actually operates on a list of VMAs, and the variable "vma" merely points to the first VMA in that list. So if we want to check whether any of the VMAs we're operating on is PFNMAP or MIXEDMAP, we have to iterate through the list and check each VMA. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- mm/mmap.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/mm/mmap.c b/mm/mmap.c index b7a5a135f20d..94c24b6efe99 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2963,6 +2963,7 @@ static void unmap_region(struct mm_struct *mm, { struct vm_area_struct *next = vma_next(mm, prev); struct mmu_gather tlb; + struct vm_area_struct *cur_vma; lru_add_drain(); tlb_gather_mmu(&tlb, mm, start, end); @@ -2977,8 +2978,12 @@ static void unmap_region(struct mm_struct *mm, * concurrent flush in this region has to be coming through the rmap, * and we synchronize against that using the rmap lock. */ - if ((vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) != 0) - tlb_flush_mmu(&tlb); + for (cur_vma = vma; cur_vma; cur_vma = cur_vma->vm_next) { + if ((cur_vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) != 0) { + tlb_flush_mmu(&tlb); + break; + } + } free_pgtables(&tlb, vma, prev ? prev->vm_end : FIRST_USER_ADDRESS, next ? next->vm_start : USER_PGTABLES_CEILING); -- 2.25.1
From: Mathew McBride <matt@traverse.com.au> stable inclusion from stable-v5.10.144 commit c7f4c203d18ca29c437c405b2b1a8de5c2cac5d7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 9a472613f5bccf1b36837423495ae592a9c5182f upstream. The soc/fsl/dpio driver will perform a soc_device_match() to determine the optimal cache settings for a given CPU core. If FSL_GUTS is not enabled, this search will fail and the driver will not configure cache stashing for the given DPIO, and a string of "unknown SoC" messages will appear: fsl_mc_dpio dpio.7: unknown SoC version fsl_mc_dpio dpio.6: unknown SoC version fsl_mc_dpio dpio.5: unknown SoC version Fixes: 51da14e96e9b ("soc: fsl: dpio: configure cache stashing destination") Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220901052149.23873-2-matt@traverse.com.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/soc/fsl/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig index 4df32bc4c7a6..c5d46152d468 100644 --- a/drivers/soc/fsl/Kconfig +++ b/drivers/soc/fsl/Kconfig @@ -24,6 +24,7 @@ config FSL_MC_DPIO tristate "QorIQ DPAA2 DPIO driver" depends on FSL_MC_BUS select SOC_BUS + select FSL_GUTS help Driver for the DPAA2 DPIO object. A DPIO provides queue and buffer management facilities for software to interact with -- 2.25.1
From: Jarrah Gosbell <kernel@undef.tools> stable inclusion from stable-v5.10.144 commit 744f98f71dc6424324272bc66d982a43f72fe009 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0V7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 80b9ebd3e478cd41526cbf84f80c3e0eb885d1d3 upstream. Add compatible string for GT1158 missing from the previous patch. Fixes: 425fe4709c76 ("Input: goodix - add support for GT1158") Signed-off-by: Jarrah Gosbell <kernel@undef.tools> Link: https://lore.kernel.org/r/20220813043821.9981-1-kernel@undef.tools Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/input/touchscreen/goodix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 1c03cbbab133..b23abde5d7db 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -1386,6 +1386,7 @@ MODULE_DEVICE_TABLE(acpi, goodix_acpi_match); #ifdef CONFIG_OF static const struct of_device_id goodix_of_match[] = { { .compatible = "goodix,gt1151" }, + { .compatible = "goodix,gt1158" }, { .compatible = "goodix,gt5663" }, { .compatible = "goodix,gt5688" }, { .compatible = "goodix,gt911" }, -- 2.25.1
participants (1)
-
Jialin Zhang