[PATCH openEuler-1.0-LTS 1/2] netrom: Fix use-after-free caused by accept on already connected socket
From: Hyunwoo Kim <v4bel@theori.io> stable inclusion from stable-v4.19.273 commit 2c1984d101978e979783bdb2376eb6eca9f8f627 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I70OFF CVE: CVE-2023-32269 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 611792920925fb088ddccbe2783c7f92fdfb6b64 ] If you call listen() and accept() on an already connect()ed AF_NETROM socket, accept() can successfully connect. This is because when the peer socket sends data to sendmsg, the skb with its own sk stored in the connected socket's sk->sk_receive_queue is connected, and nr_accept() dequeues the skb waiting in the sk->sk_receive_queue. As a result, nr_accept() allocates and returns a sock with the sk of the parent AF_NETROM socket. And here use-after-free can happen through complex race conditions: ``` cpu0 cpu1 1. socket_2 = socket(AF_NETROM) . . listen(socket_2) accepted_socket = accept(socket_2) 2. socket_1 = socket(AF_NETROM) nr_create() // sk refcount : 1 connect(socket_1) 3. write(accepted_socket) nr_sendmsg() nr_output() nr_kick() nr_send_iframe() nr_transmit_buffer() nr_route_frame() nr_loopback_queue() nr_loopback_timer() nr_rx_frame() nr_process_rx_frame(sk, skb); // sk : socket_1's sk nr_state3_machine() nr_queue_rx_frame() sock_queue_rcv_skb() sock_queue_rcv_skb_reason() __sock_queue_rcv_skb() __skb_queue_tail(list, skb); // list : socket_1's sk->sk_receive_queue 4. listen(socket_1) nr_listen() uaf_socket = accept(socket_1) nr_accept() skb_dequeue(&sk->sk_receive_queue); 5. close(accepted_socket) nr_release() nr_write_internal(sk, NR_DISCREQ) nr_transmit_buffer() // NR_DISCREQ nr_route_frame() nr_loopback_queue() nr_loopback_timer() nr_rx_frame() // sk : socket_1's sk nr_process_rx_frame() // NR_STATE_3 nr_state3_machine() // NR_DISCREQ nr_disconnect() nr_sk(sk)->state = NR_STATE_0; 6. close(socket_1) // sk refcount : 3 nr_release() // NR_STATE_0 sock_put(sk); // sk refcount : 0 sk_free(sk); close(uaf_socket) nr_release() sock_hold(sk); // UAF ``` KASAN report by syzbot: ``` BUG: KASAN: use-after-free in nr_release+0x66/0x460 net/netrom/af_netrom.c:520 Write of size 4 at addr ffff8880235d8080 by task syz-executor564/5128 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:306 [inline] print_report+0x15e/0x461 mm/kasan/report.c:417 kasan_report+0xbf/0x1f0 mm/kasan/report.c:517 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x141/0x190 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:102 [inline] atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:116 [inline] __refcount_add include/linux/refcount.h:193 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] sock_hold include/net/sock.h:775 [inline] nr_release+0x66/0x460 net/netrom/af_netrom.c:520 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x1c/0x20 net/socket.c:1365 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xaa8/0x2950 kernel/exit.c:867 do_group_exit+0xd4/0x2a0 kernel/exit.c:1012 get_signal+0x21c3/0x2450 kernel/signal.c:2859 arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f6c19e3c9b9 Code: Unable to access opcode bytes at 0x7f6c19e3c98f. RSP: 002b:00007fffd4ba2ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: 0000000000000116 RBX: 0000000000000003 RCX: 00007f6c19e3c9b9 RDX: 0000000000000318 RSI: 00000000200bd000 RDI: 0000000000000006 RBP: 0000000000000003 R08: 000000000000000d R09: 000000000000000d R10: 0000000000000000 R11: 0000000000000246 R12: 000055555566a2c0 R13: 0000000000000011 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5128: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] ____kasan_kmalloc mm/kasan/common.c:330 [inline] __kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slab_common.c:968 [inline] __kmalloc+0x5a/0xd0 mm/slab_common.c:981 kmalloc include/linux/slab.h:584 [inline] sk_prot_alloc+0x140/0x290 net/core/sock.c:2038 sk_alloc+0x3a/0x7a0 net/core/sock.c:2091 nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433 __sock_create+0x359/0x790 net/socket.c:1515 sock_create net/socket.c:1566 [inline] __sys_socket_create net/socket.c:1603 [inline] __sys_socket_create net/socket.c:1588 [inline] __sys_socket+0x133/0x250 net/socket.c:1636 __do_sys_socket net/socket.c:1649 [inline] __se_sys_socket net/socket.c:1647 [inline] __x64_sys_socket+0x73/0xb0 net/socket.c:1647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 5128: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:177 [inline] __cache_free mm/slab.c:3394 [inline] __do_kmem_cache_free mm/slab.c:3580 [inline] __kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587 sk_prot_free net/core/sock.c:2074 [inline] __sk_destruct+0x5df/0x750 net/core/sock.c:2166 sk_destruct net/core/sock.c:2181 [inline] __sk_free+0x175/0x460 net/core/sock.c:2192 sk_free+0x7c/0xa0 net/core/sock.c:2203 sock_put include/net/sock.h:1991 [inline] nr_release+0x39e/0x460 net/netrom/af_netrom.c:554 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x1c/0x20 net/socket.c:1365 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xaa8/0x2950 kernel/exit.c:867 do_group_exit+0xd4/0x2a0 kernel/exit.c:1012 get_signal+0x21c3/0x2450 kernel/signal.c:2859 arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd ``` To fix this issue, nr_listen() returns -EINVAL for sockets that successfully nr_connect(). Reported-by: syzbot+caa188bdfc1eeafeb418@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> --- net/netrom/af_netrom.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 43910e50752c..a5d819fa7c89 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -403,6 +403,11 @@ static int nr_listen(struct socket *sock, int backlog) struct sock *sk = sock->sk; lock_sock(sk); + if (sock->state != SS_UNCONNECTED) { + release_sock(sk); + return -EINVAL; + } + if (sk->sk_state != TCP_LISTEN) { memset(&nr_sk(sk)->user_addr, 0, AX25_ADDR_LEN); sk->sk_max_ack_backlog = backlog; -- 2.25.1
From: Ruihan Li <lrh2000@pku.edu.cn> mainline inclusion from mainline-v6.4-rc1 commit 25c150ac103a4ebeed0319994c742a90634ddf18 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6WHKQ CVE: CVE-2023-2002 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id... ---------------------------------------- Previously, capability was checked using capable(), which verified that the caller of the ioctl system call had the required capability. In addition, the result of the check would be stored in the HCI_SOCK_TRUSTED flag, making it persistent for the socket. However, malicious programs can abuse this approach by deliberately sharing an HCI socket with a privileged task. The HCI socket will be marked as trusted when the privileged task occasionally makes an ioctl call. This problem can be solved by using sk_capable() to check capability, which ensures that not only the current task but also the socket opener has the specified capability, thus reducing the risk of privilege escalation through the previously identified vulnerability. Cc: stable@vger.kernel.org Fixes: f81f5b2db869 ("Bluetooth: Send control open and close messages for HCI raw sockets") Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2@huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> --- net/bluetooth/hci_sock.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 45c12639bdc1..6aa37f8ea74a 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -990,7 +990,14 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, if (hci_sock_gen_cookie(sk)) { struct sk_buff *skb; - if (capable(CAP_NET_ADMIN)) + /* Perform careful checks before setting the HCI_SOCK_TRUSTED + * flag. Make sure that not only the current task but also + * the socket opener has the required capability, since + * privileged programs can be tricked into making ioctl calls + * on HCI sockets, and the socket should not be marked as + * trusted simply because the ioctl caller is privileged. + */ + if (sk_capable(sk, CAP_NET_ADMIN)) hci_sock_set_flag(sk, HCI_SOCK_TRUSTED); /* Send event to monitor */ -- 2.25.1
participants (1)
-
Yongqiang Liu