zhaoxin inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I54V1P CVE: NA ---------------------------------------------------------------- If we plug in a LS/FS device on USB2 port of EHCI, it will latch a wakeup signal in EHCI internal. This is a bug of EHCI for Some project of ZhaoXin. If enable EHCI runtime suspend and no device attach. PM core will let EHCI go to D3 to save power. However, once EHCI go to D3, it will release wakeup signal that latched on device connect to port during S0. Which will generate a SCI interrupt and bring EHCI to D0. But without device connect, EHCI will go to D3 again. So, there is suspend-resume loop and generate SCI interrupt Continuously. In order to fix this issues, we need to clear the wakeup signal latched in EHCI when EHCI suspend function is called. Signed-off-by: LeoLiu-oc <LeoLiu-oc@zhaoxin.com> --- drivers/pci/pci-driver.c | 6 +++++- drivers/usb/host/ehci-hcd.c | 21 +++++++++++++++++++++ drivers/usb/host/ehci-pci.c | 4 ++++ drivers/usb/host/ehci.h | 1 + 4 files changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 45c3a78d6004..9329f4881d42 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -513,7 +513,11 @@ static int pci_restore_standard_config(struct pci_dev *pci_dev) } pci_restore_state(pci_dev); - pci_pme_restore(pci_dev); + if (!(pci_dev->vendor == PCI_VENDOR_ID_ZHAOXIN && + pci_dev->device == 0x3104 && + (pci_dev->revision & 0xf0) == 0x90 && + pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI)) + pci_pme_restore(pci_dev); return 0; } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 8608ac513fb7..0daa6d98f9b9 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1110,6 +1110,27 @@ int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup) return -EBUSY; } + /* Clear wakeup signal locked in S0 state when device plug in */ + if (ehci->zx_wakeup_clear == 1) { + u32 __iomem *reg = &ehci->regs->port_status[4]; + u32 t1 = ehci_readl(ehci, reg); + + t1 &= (u32)~0xf0000; + t1 |= PORT_TEST_FORCE; + ehci_writel(ehci, t1, reg); + t1 = ehci_readl(ehci, reg); + usleep_range(1000, 2000); + t1 &= (u32)~0xf0000; + ehci_writel(ehci, t1, reg); + usleep_range(1000, 2000); + t1 = ehci_readl(ehci, reg); + ehci_writel(ehci, t1 | PORT_CSC, reg); + udelay(500); + t1 = ehci_readl(ehci, &ehci->regs->status); + ehci_writel(ehci, t1 & STS_PCD, &ehci->regs->status); + ehci_readl(ehci, &ehci->regs->status); + } + return 0; } EXPORT_SYMBOL_GPL(ehci_suspend); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index baae879dbddd..357dc140e914 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -216,6 +216,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd) ehci_info(ehci, "applying MosChip frame-index workaround\n"); ehci->frame_index_bug = 1; break; + case PCI_VENDOR_ID_ZHAOXIN: + if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x90) + ehci->zx_wakeup_clear = 1; + break; } /* optional debug port, normally in the first BAR */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index c8e9a48e1d51..9625b6030757 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -218,6 +218,7 @@ struct ehci_hcd { /* one per controller */ unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ unsigned need_oc_pp_cycle:1; /* MPC834X port power */ unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ + unsigned zx_wakeup_clear:1; /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) -- 2.25.1