tree: https://gitee.com/openeuler/kernel.git openEuler-1.0-LTS head: 5bc2c7cbdcbc5c8e5bbe65d3542ec2fccbc61492 commit: 206f9c11a8c8b0197da5a26859d96d2ed65f5757 [18554/21614] net: ngbe: Add Netswift Giga NIC driver config: x86_64-randconfig-011-20240203 (https://download.01.org/0day-ci/archive/20240203/202402030729.W96TozyN-lkp@i...) compiler: gcc-11 (Debian 11.3.0-12) 11.3.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240203/202402030729.W96TozyN-lkp@i...) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202402030729.W96TozyN-lkp@intel.com/ All warnings (new ones prefixed by >>): In file included from include/linux/sctp.h:57, from drivers/net/ethernet/netswift/ngbe/ngbe.h:28, from drivers/net/ethernet/netswift/ngbe/ngbe_main.c:38: include/uapi/linux/sctp.h:390:1: warning: alignment 4 of 'struct sctp_paddr_change' is less than 8 [-Wpacked-not-aligned] 390 | } __attribute__((packed, aligned(4))); | ^ include/uapi/linux/sctp.h:719:1: warning: alignment 4 of 'struct sctp_setpeerprim' is less than 8 [-Wpacked-not-aligned] 719 | } __attribute__((packed, aligned(4))); | ^ include/uapi/linux/sctp.h:718:33: warning: 'sspp_addr' offset 4 in 'struct sctp_setpeerprim' isn't aligned to 8 [-Wpacked-not-aligned] 718 | struct sockaddr_storage sspp_addr; | ^~~~~~~~~ include/uapi/linux/sctp.h:732:1: warning: alignment 4 of 'struct sctp_prim' is less than 8 [-Wpacked-not-aligned] 732 | } __attribute__((packed, aligned(4))); | ^ include/uapi/linux/sctp.h:731:33: warning: 'ssp_addr' offset 4 in 'struct sctp_prim' isn't aligned to 8 [-Wpacked-not-aligned] 731 | struct sockaddr_storage ssp_addr; | ^~~~~~~~ include/uapi/linux/sctp.h:783:1: warning: alignment 4 of 'struct sctp_paddrparams' is less than 8 [-Wpacked-not-aligned] 783 | } __attribute__((packed, aligned(4))); | ^ include/uapi/linux/sctp.h:775:33: warning: 'spp_address' offset 4 in 'struct sctp_paddrparams' isn't aligned to 8 [-Wpacked-not-aligned] 775 | struct sockaddr_storage spp_address; | ^~~~~~~~~~~ include/uapi/linux/sctp.h:896:1: warning: alignment 4 of 'struct sctp_paddrinfo' is less than 8 [-Wpacked-not-aligned] 896 | } __attribute__((packed, aligned(4))); | ^ include/uapi/linux/sctp.h:890:33: warning: 'spinfo_address' offset 4 in 'struct sctp_paddrinfo' isn't aligned to 8 [-Wpacked-not-aligned] 890 | struct sockaddr_storage spinfo_address; | ^~~~~~~~~~~~~~ In file included from drivers/net/ethernet/netswift/ngbe/ngbe_main.c:38: drivers/net/ethernet/netswift/ngbe/ngbe.h: In function 'ngbe_misc_isb': drivers/net/ethernet/netswift/ngbe/ngbe.h:764:13: warning: variable 'cur_diff' set but not used [-Wunused-but-set-variable] 764 | u32 cur_diff = 0; | ^~~~~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c: At top level: drivers/net/ethernet/netswift/ngbe/ngbe_main.c:170:6: warning: no previous prototype for 'ngbe_service_event_schedule' [-Wmissing-prototypes] 170 | void ngbe_service_event_schedule(struct ngbe_adapter *adapter) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c: In function 'ngbe_tx_timeout': drivers/net/ethernet/netswift/ngbe/ngbe_main.c:433:14: warning: variable 'real_tx_hang' set but not used [-Wunused-but-set-variable] 433 | bool real_tx_hang = false; | ^~~~~~~~~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c: In function 'ngbe_addr_list_itr':

...

drivers/net/ethernet/netswift/ngbe/ngbe_main.c:2718:30: warning: unused variable 'adapter' [-Wunused-variable] 2718 | struct ngbe_adapter *adapter = hw->back; | ^~~~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c: At top level: drivers/net/ethernet/netswift/ngbe/ngbe_main.c:3223:6: warning: no previous prototype for 'ngbe_configure_isb' [-Wmissing-prototypes] 3223 | void ngbe_configure_isb(struct ngbe_adapter *adapter) | ^~~~~~~~~~~~~~~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c:3233:6: warning: no previous prototype for 'ngbe_configure_port' [-Wmissing-prototypes] 3233 | void ngbe_configure_port(struct ngbe_adapter *adapter) | ^~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c:3592:6: warning: no previous prototype for 'ngbe_disable_device' [-Wmissing-prototypes] 3592 | void ngbe_disable_device(struct ngbe_adapter *adapter) | ^~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c:3693:5: warning: no previous prototype for 'ngbe_init_shared_code' [-Wmissing-prototypes] 3693 | s32 ngbe_init_shared_code(struct ngbe_hw *hw) | ^~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c:5810:5: warning: no previous prototype for 'ngbe_skb_pad_nonzero' [-Wmissing-prototypes] 5810 | int ngbe_skb_pad_nonzero(struct sk_buff *skb, int pad) | ^~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c: In function 'ngbe_mii_ioctl': drivers/net/ethernet/netswift/ngbe/ngbe_main.c:6010:20: warning: variable 'devad' set but not used [-Wunused-but-set-variable] 6010 | int prtad, devad, ret = 0; | ^~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c:6010:13: warning: variable 'prtad' set but not used [-Wunused-but-set-variable] 6010 | int prtad, devad, ret = 0; | ^~~~~ drivers/net/ethernet/netswift/ngbe/ngbe_main.c:257: warning: Function parameter or member 'quiet' not described in 'ngbe_read_reg' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:1644: warning: Function parameter or member 'queues' not described in 'ngbe_irq_enable' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:1644: warning: Function parameter or member 'flush' not described in 'ngbe_irq_enable' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:2035: warning: Function parameter or member 'adapter' not described in 'ngbe_configure_msi_and_legacy' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:2449: warning: Function parameter or member 'adapter' not described in 'ngbe_configure_bridge_mode' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:2913: warning: Function parameter or member 'pool' not described in 'ngbe_write_uc_addr_list' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:3722: warning: cannot understand function prototype: 'const u32 def_rss_key[10] = ' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:4583: warning: Function parameter or member 'adapter' not described in 'ngbe_check_hang_subtask' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:4648: warning: Function parameter or member 'adapter' not described in 'ngbe_watchdog_update_link_status' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:4744: warning: Function parameter or member 'adapter' not described in 'ngbe_watchdog_link_is_up' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:4789: warning: Function parameter or member 'adapter' not described in 'ngbe_watchdog_link_is_down' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:4856: warning: Function parameter or member 'adapter' not described in 'ngbe_watchdog_flush_tx' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:4928: warning: Function parameter or member 'adapter' not described in 'ngbe_watchdog_subtask' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:4957: warning: Function parameter or member 't' not described in 'ngbe_service_timer' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:4957: warning: Excess function parameter 'data' description in 'ngbe_service_timer' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:6043: warning: Function parameter or member 'dev' not described in 'ngbe_setup_tc' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:6043: warning: Excess function parameter 'netdev' description in 'ngbe_setup_tc' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:6297: warning: Excess function parameter 'device_id' description in 'ngbe_wol_supported' drivers/net/ethernet/netswift/ngbe/ngbe_main.c:6297: warning: Excess function parameter 'subdev_id' description in 'ngbe_wol_supported'

vim +/adapter +2718 drivers/net/ethernet/netswift/ngbe/ngbe_main.c 2712 2713 static u8 *ngbe_addr_list_itr(struct ngbe_hw *hw, 2714 u8 **mc_addr_ptr, u32 *vmdq) 2715 { 2716 struct netdev_hw_addr *mc_ptr; 2717 u8 *addr = *mc_addr_ptr;

2718 struct ngbe_adapter *adapter = hw->back; 2719 2720 /* VMDQ_P implicitely uses the adapter struct when CONFIG_PCI_IOV is 2721 * defined, so we have to wrap the pointer above correctly to prevent 2722 * a warning. 2723 */ 2724 *vmdq = VMDQ_P(0); 2725 2726 mc_ptr = container_of(addr, struct netdev_hw_addr, addr[0]); 2727 if (mc_ptr->list.next) { 2728 struct netdev_hw_addr *ha; 2729 2730 ha = list_entry(mc_ptr->list.next, struct netdev_hw_addr, list); 2731 *mc_addr_ptr = ha->addr; 2732 } else 2733 *mc_addr_ptr = NULL; 2734 2735 return addr; 2736 } 2737

-- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki