From: Eli Billauer <eli.billauer@gmail.com> stable inclusion from stable-v6.6.48 commit 5cff754692ad45d5086b75fef8cc3a99c30a1005 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAQOJN CVE: CVE-2024-45011 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 2374bf7558de915edc6ec8cb10ec3291dfab9594 upstream. Ensure, as the driver probes the device, that all endpoints that the driver may attempt to access exist and are of the correct type. All XillyUSB devices must have a Bulk IN and Bulk OUT endpoint at address 1. This is verified in xillyusb_setup_base_eps(). On top of that, a XillyUSB device may have additional Bulk OUT endpoints. The information about these endpoints' addresses is deduced from a data structure (the IDT) that the driver fetches from the device while probing it. These endpoints are checked in setup_channels(). A XillyUSB device never has more than one IN endpoint, as all data towards the host is multiplexed in this single Bulk IN endpoint. This is why setup_channels() only checks OUT endpoints. Reported-by: syzbot+eac39cba052f2e750dbe@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Closes: https://lore.kernel.org/all/0000000000001d44a6061f7a54ee@google.com/T/ Fixes: a53d1202aef1 ("char: xillybus: Add driver for XillyUSB (Xillybus variant for USB)"). Signed-off-by: Eli Billauer <eli.billauer@gmail.com> Link: https://lore.kernel.org/r/20240816070200.50695-2-eli.billauer@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> --- drivers/char/xillybus/xillyusb.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/char/xillybus/xillyusb.c b/drivers/char/xillybus/xillyusb.c index 5a5afa14ca8c..613c366a2df6 100644 --- a/drivers/char/xillybus/xillyusb.c +++ b/drivers/char/xillybus/xillyusb.c @@ -1906,6 +1906,13 @@ static const struct file_operations xillyusb_fops = { static int xillyusb_setup_base_eps(struct xillyusb_dev *xdev) { + struct usb_device *udev = xdev->udev; + + /* Verify that device has the two fundamental bulk in/out endpoints */ + if (usb_pipe_type_check(udev, usb_sndbulkpipe(udev, MSG_EP_NUM)) || + usb_pipe_type_check(udev, usb_rcvbulkpipe(udev, IN_EP_NUM))) + return -ENODEV; + xdev->msg_ep = endpoint_alloc(xdev, MSG_EP_NUM | USB_DIR_OUT, bulk_out_work, 1, 2); if (!xdev->msg_ep) @@ -1935,14 +1942,15 @@ static int setup_channels(struct xillyusb_dev *xdev, __le16 *chandesc, int num_channels) { - struct xillyusb_channel *chan; + struct usb_device *udev = xdev->udev; + struct xillyusb_channel *chan, *new_channels; int i; chan = kcalloc(num_channels, sizeof(*chan), GFP_KERNEL); if (!chan) return -ENOMEM; - xdev->channels = chan; + new_channels = chan; for (i = 0; i < num_channels; i++, chan++) { unsigned int in_desc = le16_to_cpu(*chandesc++); @@ -1971,6 +1979,15 @@ static int setup_channels(struct xillyusb_dev *xdev, */ if ((out_desc & 0x80) && i < 14) { /* Entry is valid */ + if (usb_pipe_type_check(udev, + usb_sndbulkpipe(udev, i + 2))) { + dev_err(xdev->dev, + "Missing BULK OUT endpoint %d\n", + i + 2); + kfree(new_channels); + return -ENODEV; + } + chan->writable = 1; chan->out_synchronous = !!(out_desc & 0x40); chan->out_seekable = !!(out_desc & 0x20); @@ -1980,6 +1997,7 @@ static int setup_channels(struct xillyusb_dev *xdev, } } + xdev->channels = new_channels; return 0; } -- 2.34.1