From: Sieng-Piaw Liew <liew.s.piaw@gmail.com> mainline inclusion from mainline-v6.7-rc1 commit 86565682e9053e5deb128193ea9e88531bbae9cf category: bugfix bugzilla: 190056, https://gitee.com/src-openeuler/kernel/issues/I9REDN CVE: CVE-2023-52834 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540. Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com> Link: https://lore.kernel.org/r/20230912010711.12036-1-liew.s.piaw@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Conflicts: drivers/net/ethernet/atheros/atl1c/atl1c.h drivers/net/ethernet/atheros/atl1c/atl1c_main.c [commit 8042824a3c0b and 057f4af2b171 support multiple rx queues for atk1c driver, which lead to context conflicts. commit a9d6df642dc8 use napi_alloc_skb() to optimize performance in NAPI context, which not merged] Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> --- drivers/net/ethernet/atheros/atl1c/atl1c.h | 1 - .../net/ethernet/atheros/atl1c/atl1c_main.c | 52 +++++-------------- 2 files changed, 12 insertions(+), 41 deletions(-) diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c.h b/drivers/net/ethernet/atheros/atl1c/atl1c.h index a0562a90fb6d..c1792071f41f 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c.h +++ b/drivers/net/ethernet/atheros/atl1c/atl1c.h @@ -508,7 +508,6 @@ struct atl1c_adapter { struct napi_struct napi; struct page *rx_page; unsigned int rx_page_offset; - unsigned int rx_frag_size; struct atl1c_hw hw; struct atl1c_hw_stats hw_stats; struct mii_if_info mii; /* MII interface info */ diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 2c5af0d7666a..8859a26cf3e0 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -464,15 +464,10 @@ static int atl1c_set_mac_addr(struct net_device *netdev, void *p) static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter, struct net_device *dev) { - unsigned int head_size; int mtu = dev->mtu; adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ? roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE; - - head_size = SKB_DATA_ALIGN(adapter->rx_buffer_len + NET_SKB_PAD) + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); - adapter->rx_frag_size = roundup_pow_of_two(head_size); } static netdev_features_t atl1c_fix_features(struct net_device *netdev, @@ -944,10 +939,6 @@ static void atl1c_free_ring_resources(struct atl1c_adapter *adapter) kfree(adapter->tpd_ring[0].buffer_info); adapter->tpd_ring[0].buffer_info = NULL; } - if (adapter->rx_page) { - put_page(adapter->rx_page); - adapter->rx_page = NULL; - } } /** @@ -1650,36 +1641,6 @@ static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter, skb_checksum_none_assert(skb); } -static struct sk_buff *atl1c_alloc_skb(struct atl1c_adapter *adapter) -{ - struct sk_buff *skb; - struct page *page; - - if (adapter->rx_frag_size > PAGE_SIZE) - return netdev_alloc_skb(adapter->netdev, - adapter->rx_buffer_len); - - page = adapter->rx_page; - if (!page) { - adapter->rx_page = page = alloc_page(GFP_ATOMIC); - if (unlikely(!page)) - return NULL; - adapter->rx_page_offset = 0; - } - - skb = build_skb(page_address(page) + adapter->rx_page_offset, - adapter->rx_frag_size); - if (likely(skb)) { - skb_reserve(skb, NET_SKB_PAD); - adapter->rx_page_offset += adapter->rx_frag_size; - if (adapter->rx_page_offset >= PAGE_SIZE) - adapter->rx_page = NULL; - else - get_page(page); - } - return skb; -} - static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter) { struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring; @@ -1701,13 +1662,24 @@ static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter) while (next_info->flags & ATL1C_BUFFER_FREE) { rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use); - skb = atl1c_alloc_skb(adapter); + /* When DMA RX address is set to something like + * 0x....fc0, it will be very likely to cause DMA + * RFD overflow issue. + * + * To work around it, we apply rx skb with 64 bytes + * longer space, and offset the address whenever + * 0x....fc0 is detected. + */ + skb = netdev_alloc_skb(adapter->netdev, adapter->rx_buffer_len + 64); if (unlikely(!skb)) { if (netif_msg_rx_err(adapter)) dev_warn(&pdev->dev, "alloc rx buffer failed\n"); break; } + if (((unsigned long)skb->data & 0xfff) == 0xfc0) + skb_reserve(skb, 64); + /* * Make buffer alignment 2 beyond a 16 byte boundary * this will result in a 16 byte aligned IP header after -- 2.25.1