[PATCH kernel-4.19 1/4] nbd: Fix NULL pointer in flush_workqueue
From: Sun Ke <sunke32@huawei.com> mainline inclusion from mainline-v5.13-rc2 commit 79ebe9110fa458d58f1fceb078e2068d7ad37390 category: bugfix bugzilla: 27457 CVE: NA ----------------------------------------------- Open /dev/nbdX first, the config_refs will be 1 and the pointers in nbd_device are still null. Disconnect /dev/nbdX, then reference a null recv_workq. The protection by config_refs in nbd_genl_disconnect is useless. [ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 656.368943] #PF: supervisor write access in kernel mode [ 656.369844] #PF: error_code(0x0002) - not-present page [ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0 [ 656.371693] Oops: 0002 [#1] SMP [ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1 [ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 656.375904] RIP: 0010:mutex_lock+0x29/0x60 [ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d [ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246 [ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020 [ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318 [ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40 [ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00 [ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 [ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0 [ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 656.384927] Call Trace: [ 656.385111] flush_workqueue+0x92/0x6c0 [ 656.385395] nbd_disconnect_and_put+0x81/0xd0 [ 656.385716] nbd_genl_disconnect+0x125/0x2a0 [ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0 [ 656.386422] genl_rcv_msg+0xfc/0x2b0 [ 656.386685] ? nbd_ioctl+0x490/0x490 [ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0 [ 656.387354] netlink_rcv_skb+0x62/0x180 [ 656.387638] genl_rcv+0x34/0x60 [ 656.387874] netlink_unicast+0x26d/0x590 [ 656.388162] netlink_sendmsg+0x398/0x6c0 [ 656.388451] ? netlink_rcv_skb+0x180/0x180 [ 656.388750] ____sys_sendmsg+0x1da/0x320 [ 656.389038] ? ____sys_recvmsg+0x130/0x220 [ 656.389334] ___sys_sendmsg+0x8e/0xf0 [ 656.389605] ? ___sys_recvmsg+0xa2/0xf0 [ 656.389889] ? handle_mm_fault+0x1671/0x21d0 [ 656.390201] __sys_sendmsg+0x6d/0xe0 [ 656.390464] __x64_sys_sendmsg+0x23/0x30 [ 656.390751] do_syscall_64+0x45/0x70 [ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put(). Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Sun Ke <sunke32@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20210512114331.1233964-2-sunke32@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/block/nbd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 533ee803c79aa..55552f719b25b 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1960,7 +1960,8 @@ static void nbd_disconnect_and_put(struct nbd_device *nbd) * config ref and try to destroy the workqueue from inside the work * queue. */ - flush_workqueue(nbd->recv_workq); + if (nbd->recv_workq) + flush_workqueue(nbd->recv_workq); if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, &nbd->config->runtime_flags)) nbd_config_put(nbd); -- 2.25.1
From: David Jeffery <djeffery@redhat.com> mainline inclusion from mainline-5.12-rc5 commit a958937ff166fc60d1c3a721036f6ff41bfa2821 category: bugfix bugzilla: 51373 CVE: NA ------------------------------------------------- When a stacked block device inserts a request into another block device using blk_insert_cloned_request, the request's nr_phys_segments field gets recalculated by a call to blk_recalc_rq_segments in blk_cloned_rq_check_limits. But blk_recalc_rq_segments does not know how to handle multi-segment discards. For disk types which can handle multi-segment discards like nvme, this results in discard requests which claim a single segment when it should report several, triggering a warning in nvme and causing nvme to fail the discard from the invalid state. WARNING: CPU: 5 PID: 191 at drivers/nvme/host/core.c:700 nvme_setup_discard+0x170/0x1e0 [nvme_core] ... nvme_setup_cmd+0x217/0x270 [nvme_core] nvme_loop_queue_rq+0x51/0x1b0 [nvme_loop] __blk_mq_try_issue_directly+0xe7/0x1b0 blk_mq_request_issue_directly+0x41/0x70 ? blk_account_io_start+0x40/0x50 dm_mq_queue_rq+0x200/0x3e0 blk_mq_dispatch_rq_list+0x10a/0x7d0 ? __sbitmap_queue_get+0x25/0x90 ? elv_rb_del+0x1f/0x30 ? deadline_remove_request+0x55/0xb0 ? dd_dispatch_request+0x181/0x210 __blk_mq_do_dispatch_sched+0x144/0x290 ? bio_attempt_discard_merge+0x134/0x1f0 __blk_mq_sched_dispatch_requests+0x129/0x180 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x47/0xe0 __blk_mq_delay_run_hw_queue+0x15b/0x170 blk_mq_sched_insert_requests+0x68/0xe0 blk_mq_flush_plug_list+0xf0/0x170 blk_finish_plug+0x36/0x50 xlog_cil_committed+0x19f/0x290 [xfs] xlog_cil_process_committed+0x57/0x80 [xfs] xlog_state_do_callback+0x1e0/0x2a0 [xfs] xlog_ioend_work+0x2f/0x80 [xfs] process_one_work+0x1b6/0x350 worker_thread+0x53/0x3e0 ? process_one_work+0x350/0x350 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 This patch fixes blk_recalc_rq_segments to be aware of devices which can have multi-segment discards. It calculates the correct discard segment count by counting the number of bio as each discard bio is considered its own segment. Fixes: 1e739730c5b9 ("block: optionally merge discontiguous discard bios into a single request") Signed-off-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Link: https://lore.kernel.org/r/20210211143807.GA115624@redhat Signed-off-by: Jens Axboe <axboe@kernel.dk> Conflicts: block/blk-merge.c Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- block/blk-merge.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/block/blk-merge.c b/block/blk-merge.c index d24a6c9398ed8..b19fc258d089f 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -235,7 +235,8 @@ static unsigned int __blk_recalc_rq_segments(struct request_queue *q, { struct bio_vec bv, bvprv = { NULL }; int cluster, prev = 0; - unsigned int seg_size, nr_phys_segs; + unsigned int nr_phys_segs = 0; + unsigned int seg_size; struct bio *fbio, *bbio; struct bvec_iter iter; @@ -245,6 +246,12 @@ static unsigned int __blk_recalc_rq_segments(struct request_queue *q, switch (bio_op(bio)) { case REQ_OP_DISCARD: case REQ_OP_SECURE_ERASE: + if (queue_max_discard_segments(q) > 1) { + for_each_bio(bio) + nr_phys_segs++; + return nr_phys_segs; + } + return 1; case REQ_OP_WRITE_ZEROES: return 0; case REQ_OP_WRITE_SAME: @@ -254,7 +261,6 @@ static unsigned int __blk_recalc_rq_segments(struct request_queue *q, fbio = bio; cluster = blk_queue_cluster(q); seg_size = 0; - nr_phys_segs = 0; for_each_bio(bio) { bio_for_each_segment(bv, bio, iter) { /* -- 2.25.1
From: Keith Busch <keith.busch@intel.com> mainline inclusion from mainline-5.1 commit 415df90b437f2b026ed37af2f812e41fc06c7f90 category: bugfix bugzilla: NA CVE: NA ------------------------------------------------- A write or flush IO passthrough command is expected to change the logical block content, so don't warn on these as no additional handling is necessary. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Reviewed-by: Weifeng Su <suweifeng1@huawei.com> Reviewed-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/nvme/host/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index aedbe52545fcd..b6ec73c77c18f 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1280,7 +1280,7 @@ static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns, if (ns) { if (ctrl->effects) effects = le32_to_cpu(ctrl->effects->iocs[opcode]); - if (effects & ~NVME_CMD_EFFECTS_CSUPP) + if (effects & ~(NVME_CMD_EFFECTS_CSUPP | NVME_CMD_EFFECTS_LBCC)) dev_warn(ctrl->device, "IO command:%02x has unhandled effects:%08x\n", opcode, effects); -- 2.25.1
From: Longfang Liu <liulongfang@huawei.com> mainline inclusion from mainline-5.13 commit 26b75952ca0b category: bugfix bugzilla: NA CVE: NA ------------------------------------------------- Kunpeng920's EHCI controller does not have SBRN register. Reading the SBRN register when the controller driver is initialized will get 0. When rebooting the EHCI driver, ehci_shutdown() will be called. if the sbrn flag is 0, ehci_shutdown() will return directly. The sbrn flag being 0 will cause the EHCI interrupt signal to not be turned off after reboot. this interrupt that is not closed will cause an exception to the device sharing the interrupt. Therefore, the EHCI controller of Kunpeng920 needs to skip the read operation of the SBRN register. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Link: https://lore.kernel.org/r/1617958081-17999-1-git-send-email-liulongfang@huaw... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Reviewed-by: Weifeng Su <suweifeng1@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/usb/host/ehci-pci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index fcfad5c298a9f..56e6fd0f04829 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -298,6 +298,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd) if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST) ; /* ConneXT has no sbrn register */ + else if (pdev->vendor == PCI_VENDOR_ID_HUAWEI + && pdev->device == 0xa239) + ; /* HUAWEI Kunpeng920 USB EHCI has no sbrn register */ else pci_read_config_byte(pdev, 0x60, &ehci->sbrn); -- 2.25.1
participants (1)
-
Yang Yingliang