From: Barry Song <v-songbaohua@oppo.com> maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7U78A CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?... ------------------------------------------- This patch does some preparation works to extend batched TLB flush to arm64. Including: - Extend set_tlb_ubc_flush_pending() and arch_tlbbatch_add_mm() to accept an additional argument for address, architectures like arm64 may need this for tlbi. - Rename arch_tlbbatch_add_mm() to arch_tlbbatch_add_pending() to match its current function since we don't need to handle mm on architectures like arm64 and add_mm is not proper, add_pending will make sense to both as on x86 we're pending the TLB flush operations while on arm64 we're pending the synchronize operations. This intends no functional changes on x86. Link: https://lkml.kernel.org/r/20230717131004.12662-3-yangyicong@huawei.com Tested-by: Yicong Yang <yangyicong@hisilicon.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Tested-by: Punit Agrawal <punit.agrawal@bytedance.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Barry Song <baohua@kernel.org> Cc: Darren Hart <darren@os.amperecomputing.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: lipeifeng <lipeifeng@oppo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Conflicts: mm/rmap.c Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com> --- arch/x86/include/asm/tlbflush.h | 5 +++-- include/linux/mm_types_task.h | 4 ++-- mm/rmap.c | 10 ++++++---- 3 files changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index c1d8df34c6c6..1404f43a5986 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -262,8 +262,9 @@ static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) return atomic64_inc_return(&mm->context.tlb_gen); } -static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch, - struct mm_struct *mm) +static inline void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch, + struct mm_struct *mm, + unsigned long uaddr) { inc_mm_tlb_gen(mm); cpumask_or(&batch->cpumask, &batch->cpumask, mm_cpumask(mm)); diff --git a/include/linux/mm_types_task.h b/include/linux/mm_types_task.h index c1bc6731125c..78bbded3b13f 100644 --- a/include/linux/mm_types_task.h +++ b/include/linux/mm_types_task.h @@ -77,8 +77,8 @@ struct tlbflush_unmap_batch { #ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH /* * The arch code makes the following promise: generic code can modify a - * PTE, then call arch_tlbbatch_add_mm() (which internally provides all - * needed barriers), then call arch_tlbbatch_flush(), and the entries + * PTE, then call arch_tlbbatch_add_pending() (which internally provides + * all needed barriers), then call arch_tlbbatch_flush(), and the entries * will be flushed on all CPUs by the time that arch_tlbbatch_flush() * returns. */ diff --git a/mm/rmap.c b/mm/rmap.c index d4803e04b00d..38eafa951fe0 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -623,11 +623,12 @@ void try_to_unmap_flush_dirty(void) try_to_unmap_flush(); } -static void set_tlb_ubc_flush_pending(struct mm_struct *mm, bool writable) +static void set_tlb_ubc_flush_pending(struct mm_struct *mm, bool writable, + unsigned long uaddr) { struct tlbflush_unmap_batch *tlb_ubc = ¤t->tlb_ubc; - arch_tlbbatch_add_mm(&tlb_ubc->arch, mm); + arch_tlbbatch_add_pending(&tlb_ubc->arch, mm, uaddr); tlb_ubc->flush_required = true; /* @@ -687,7 +688,8 @@ void flush_tlb_batched_pending(struct mm_struct *mm) } } #else -static void set_tlb_ubc_flush_pending(struct mm_struct *mm, bool writable) +static void set_tlb_ubc_flush_pending(struct mm_struct *mm, bool writable, + unsigned long uaddr) { } @@ -1566,7 +1568,7 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma, */ pteval = ptep_get_and_clear(mm, address, pvmw.pte); - set_tlb_ubc_flush_pending(mm, pte_dirty(pteval)); + set_tlb_ubc_flush_pending(mm, pte_dirty(pteval), address); } else { pteval = ptep_clear_flush(vma, address, pvmw.pte); } -- 2.25.1

From: Barry Song <v-songbaohua@oppo.com> maillist inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7U78A CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?... ------------------------------------------- On x86, batched and deferred tlb shootdown has lead to 90% performance increase on tlb shootdown. on arm64, HW can do tlb shootdown without software IPI. But sync tlbi is still quite expensive. Even running a simplest program which requires swapout can prove this is true, #include <sys/types.h> #include <unistd.h> #include <sys/mman.h> #include <string.h> int main() { #define SIZE (1 * 1024 * 1024) volatile unsigned char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0); memset(p, 0x88, SIZE); for (int k = 0; k < 10000; k++) { /* swap in */ for (int i = 0; i < SIZE; i += 4096) { (void)p[i]; } /* swap out */ madvise(p, SIZE, MADV_PAGEOUT); } } Perf result on snapdragon 888 with 8 cores by using zRAM as the swap block device. ~ # perf record taskset -c 4 ./a.out [ perf record: Woken up 10 times to write data ] [ perf record: Captured and wrote 2.297 MB perf.data (60084 samples) ] ~ # perf report # To display the perf.data header info, please use --header/--header-only options. # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 60K of event 'cycles' # Event count (approx.): 35706225414 # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 21.07% a.out [kernel.kallsyms] [k] _raw_spin_unlock_irq 8.23% a.out [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 6.67% a.out [kernel.kallsyms] [k] filemap_map_pages 6.16% a.out [kernel.kallsyms] [k] __zram_bvec_write 5.36% a.out [kernel.kallsyms] [k] ptep_clear_flush 3.71% a.out [kernel.kallsyms] [k] _raw_spin_lock 3.49% a.out [kernel.kallsyms] [k] memset64 1.63% a.out [kernel.kallsyms] [k] clear_page 1.42% a.out [kernel.kallsyms] [k] _raw_spin_unlock 1.26% a.out [kernel.kallsyms] [k] mod_zone_state.llvm.8525150236079521930 1.23% a.out [kernel.kallsyms] [k] xas_load 1.15% a.out [kernel.kallsyms] [k] zram_slot_lock ptep_clear_flush() takes 5.36% CPU in the micro-benchmark swapping in/out a page mapped by only one process. If the page is mapped by multiple processes, typically, like more than 100 on a phone, the overhead would be much higher as we have to run tlb flush 100 times for one single page. Plus, tlb flush overhead will increase with the number of CPU cores due to the bad scalability of tlb shootdown in HW, so those ARM64 servers should expect much higher overhead. Further perf annonate shows 95% cpu time of ptep_clear_flush is actually used by the final dsb() to wait for the completion of tlb flush. This provides us a very good chance to leverage the existing batched tlb in kernel. The minimum modification is that we only send async tlbi in the first stage and we send dsb while we have to sync in the second stage. With the above simplest micro benchmark, collapsed time to finish the program decreases around 5%. Typical collapsed time w/o patch: ~ # time taskset -c 4 ./a.out 0.21user 14.34system 0:14.69elapsed w/ patch: ~ # time taskset -c 4 ./a.out 0.22user 13.45system 0:13.80elapsed Also tested with benchmark in the commit on Kunpeng920 arm64 server and observed an improvement around 12.5% with command `time ./swap_bench`. w/o w/ real 0m13.460s 0m11.771s user 0m0.248s 0m0.279s sys 0m12.039s 0m11.458s Originally it's noticed a 16.99% overhead of ptep_clear_flush() which has been eliminated by this patch: [root@localhost yang]# perf record -- ./swap_bench && perf report [...] 16.99% swap_bench [kernel.kallsyms] [k] ptep_clear_flush It is tested on 4,8,128 CPU platforms and shows to be beneficial on large systems but may not have improvement on small systems like on a 4 CPU platform. Also this patch improve the performance of page migration. Using pmbench and tries to migrate the pages of pmbench between node 0 and node 1 for 100 times for 1G memory, this patch decrease the time used around 20% (prev 18.338318910 sec after 13.981866350 sec) and saved the time used by ptep_clear_flush(). Link: https://lkml.kernel.org/r/20230717131004.12662-5-yangyicong@huawei.com Tested-by: Yicong Yang <yangyicong@hisilicon.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Tested-by: Punit Agrawal <punit.agrawal@bytedance.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Barry Song <baohua@kernel.org> Cc: Darren Hart <darren@os.amperecomputing.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: lipeifeng <lipeifeng@oppo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com> --- .../features/vm/TLB/arch-support.txt | 2 +- arch/arm64/Kconfig | 1 + arch/arm64/include/asm/tlbbatch.h | 12 +++++ arch/arm64/include/asm/tlbflush.h | 44 +++++++++++++++++-- 4 files changed, 55 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/include/asm/tlbbatch.h diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index 30f75a79ce01..1ccf586c7810 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -9,7 +9,7 @@ | alpha: | TODO | | arc: | TODO | | arm: | TODO | - | arm64: | TODO | + | arm64: | ok | | c6x: | .. | | csky: | TODO | | h8300: | .. | diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 16620146c49a..139d98a7a12d 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -78,6 +78,7 @@ config ARM64 select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG) select ARCH_SUPPORTS_NUMA_BALANCING + select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT select ARCH_WANT_DEFAULT_BPF_JIT select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT diff --git a/arch/arm64/include/asm/tlbbatch.h b/arch/arm64/include/asm/tlbbatch.h new file mode 100644 index 000000000000..fedb0b87b8db --- /dev/null +++ b/arch/arm64/include/asm/tlbbatch.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ARCH_ARM64_TLBBATCH_H +#define _ARCH_ARM64_TLBBATCH_H + +struct arch_tlbflush_unmap_batch { + /* + * For arm64, HW can do tlb shootdown, so we don't + * need to record cpumask for sending IPI + */ +}; + +#endif /* _ARCH_ARM64_TLBBATCH_H */ diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index 36f02892e1df..4c28c6c4acba 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -254,17 +254,23 @@ static inline void flush_tlb_mm(struct mm_struct *mm) dsb(ish); } -static inline void flush_tlb_page_nosync(struct vm_area_struct *vma, - unsigned long uaddr) +static inline void __flush_tlb_page_nosync(struct mm_struct *mm, + unsigned long uaddr) { unsigned long addr; dsb(ishst); - addr = __TLBI_VADDR(uaddr, ASID(vma->vm_mm)); + addr = __TLBI_VADDR(uaddr, ASID(mm)); __tlbi(vale1is, addr); __tlbi_user(vale1is, addr); } +static inline void flush_tlb_page_nosync(struct vm_area_struct *vma, + unsigned long uaddr) +{ + return __flush_tlb_page_nosync(vma->vm_mm, uaddr); +} + static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { @@ -272,6 +278,38 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, dsb(ish); } +static inline bool arch_tlbbatch_should_defer(struct mm_struct *mm) +{ +#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI + /* + * TLB flush deferral is not required on systems which are affected by + * ARM64_WORKAROUND_REPEAT_TLBI, as __tlbi()/__tlbi_user() implementation + * will have two consecutive TLBI instructions with a dsb(ish) in between + * defeating the purpose (i.e save overall 'dsb ish' cost). + */ + if (unlikely(cpus_have_const_cap(ARM64_WORKAROUND_REPEAT_TLBI))) + return false; +#endif + return true; +} + +static inline void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch, + struct mm_struct *mm, + unsigned long uaddr) +{ + __flush_tlb_page_nosync(mm, uaddr); +} + +static inline void arch_flush_tlb_batched_pending(struct mm_struct *mm) +{ + dsb(ish); +} + +static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch) +{ + dsb(ish); +} + /* * This is meant to avoid soft lock-ups on large TLB flushing ranges and not * necessarily a performance improvement. -- 2.25.1