[PATCH openEuler-5.10-LTS-SP1 01/74] drm/msm/dsi: fix the inconsistent indenting
From: sunliming <sunliming@kylinos.cn> stable inclusion from stable-v5.10.142 commit 631fbefd877721d15c4f525cc71e851e0e588c8e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2f25a1fb4ec516c5ad67afd754334b491b9f09a5 ] Fix the inconsistent indenting in function msm_dsi_dphy_timing_calc_v3(). Fix the following smatch warnings: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:350 msm_dsi_dphy_timing_calc_v3() warn: inconsistent indenting Fixes: f1fa7ff44056 ("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: sunliming <sunliming@kylinos.cn> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/494662/ Link: https://lore.kernel.org/r/20220719015622.646718-1-sunliming@kylinos.cn Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index e07986ab52c2..2e0be85ec394 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -345,7 +345,7 @@ int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing, } else { timing->shared_timings.clk_pre = linear_inter(tmax, tmin, pcnt2, 0, false); - timing->shared_timings.clk_pre_inc_by_2 = 0; + timing->shared_timings.clk_pre_inc_by_2 = 0; } timing->ta_go = 3; -- 2.25.1
From: Kuogee Hsieh <quic_khsieh@quicinc.com> stable inclusion from stable-v5.10.142 commit 1487e8fc16f7fbd605b78c9c5ca1493b7ddfe761 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 032d57960176ac01cc5adff5bcc5eb51317f8781 ] Data Symbols scrambled is required for tps4 at link training 2. Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to work. RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter measurement with minimal equipment for embedded applications purpose and is not required to be set during normal operation. Current implementation always have RECOVERED_CLOCK_OUT_EN bit set which cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent tps4 from working. This patch delete setting RECOVERED_CLOCK_OUT_EN to fix SCRAMBLING_DISABLE be wrongly set at tps4. Changes in v2: -- fix Fixes tag Changes in v3: -- revise commit text Changes in v4: -- fix commit text newline Changes in v5: -- fix commit text line over 75 chars Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/497194/ Link: https://lore.kernel.org/r/1660258670-4200-1-git-send-email-quic_khsieh@quici... Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/msm/dp/dp_ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c index b9ca844ce2ad..9fac55c24214 100644 --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c @@ -1205,7 +1205,7 @@ static int dp_ctrl_link_train_2(struct dp_ctrl_private *ctrl, if (ret) return ret; - dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN); + dp_ctrl_train_pattern_set(ctrl, pattern); for (tries = 0; tries <= maximum_retries; tries++) { drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd); -- 2.25.1
From: Douglas Anderson <dianders@chromium.org> stable inclusion from stable-v5.10.142 commit 43e523a4070ec34623e7f8526cf6d977618bc0fa category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1e00d6ac8a3422765bae37aeac2002dfd3c0bda6 ] 3 regulators are listed but the number 2 is specified. Fix it. Fixes: 3a3ff88a0fc1 ("drm/msm/dsi: Add 8x96 info in dsi_cfg") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496318/ Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c8... Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/msm/dsi/dsi_cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c index d255bea87ca4..6c93c215ed79 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c @@ -117,7 +117,7 @@ static const char * const dsi_8996_bus_clk_names[] = { static const struct msm_dsi_config msm8996_dsi_cfg = { .io_offset = DSI_6G_REG_SHIFT, .reg_cfg = { - .num = 2, + .num = 3, .regs = { {"vdda", 18160, 1 }, /* 1.25 V */ {"vcca", 17000, 32 }, /* 0.925 V */ -- 2.25.1
From: Douglas Anderson <dianders@chromium.org> stable inclusion from stable-v5.10.142 commit f040abf62e62dce285f68c216fc86d34ff7ed5fd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit a1653a75987749ba6dba94fa2e62f0f36b387d1a ] 1 regulator is listed but the number 2 is specified. This presumably means we try to get a regulator with no name. Fix it. Fixes: 462f7017a691 ("drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496323/ Link: https://lore.kernel.org/r/20220804073608.v4.2.I94b3c3e412b7c208061349f05659e... Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/msm/dsi/dsi_cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c index 6c93c215ed79..73f066ef6f40 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c @@ -156,7 +156,7 @@ static const char * const dsi_sdm660_bus_clk_names[] = { static const struct msm_dsi_config sdm660_dsi_cfg = { .io_offset = DSI_6G_REG_SHIFT, .reg_cfg = { - .num = 2, + .num = 1, .regs = { {"vdda", 12560, 4 }, /* 1.2 V */ }, -- 2.25.1
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com> stable inclusion from stable-v5.10.142 commit b69e05b1e830526f81b75aa87f99d467556d845d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ] On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI specification (see Table 4.13 "PM1 Control Registers Fixed Hardware Feature Control Bits" for the details). Fix the mask and other related definitions accordingly. Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.int... Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/platform/x86/pmc_atom.c | 2 +- include/linux/platform_data/x86/pmc_atom.h | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c index a9d2a4b98e57..4b0739f95f8b 100644 --- a/drivers/platform/x86/pmc_atom.c +++ b/drivers/platform/x86/pmc_atom.c @@ -244,7 +244,7 @@ static void pmc_power_off(void) pm1_cnt_port = acpi_base_addr + PM1_CNT; pm1_cnt_value = inl(pm1_cnt_port); - pm1_cnt_value &= SLEEP_TYPE_MASK; + pm1_cnt_value &= ~SLEEP_TYPE_MASK; pm1_cnt_value |= SLEEP_TYPE_S5; pm1_cnt_value |= SLEEP_ENABLE; diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h index 022bcea9edec..99a9b09dc839 100644 --- a/include/linux/platform_data/x86/pmc_atom.h +++ b/include/linux/platform_data/x86/pmc_atom.h @@ -7,6 +7,8 @@ #ifndef PMC_ATOM_H #define PMC_ATOM_H +#include <linux/bits.h> + /* ValleyView Power Control Unit PCI Device ID */ #define PCI_DEVICE_ID_VLV_PMC 0x0F1C /* CherryTrail Power Control Unit PCI Device ID */ @@ -139,9 +141,9 @@ #define ACPI_MMIO_REG_LEN 0x100 #define PM1_CNT 0x4 -#define SLEEP_TYPE_MASK 0xFFFFECFF +#define SLEEP_TYPE_MASK GENMASK(12, 10) #define SLEEP_TYPE_S5 0x1C00 -#define SLEEP_ENABLE 0x2000 +#define SLEEP_ENABLE BIT(13) extern int pmc_atom_read(int offset, u32 *value); extern int pmc_atom_write(int offset, u32 value); -- 2.25.1
From: Marcus Folkesson <marcus.folkesson@gmail.com> stable inclusion from stable-v5.10.142 commit e6aeb8be85716d63589414a862bf233483c3e6fe category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8f89e33bf040bbef66386c426198622180233178 ] The device supports negative values as well. Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911") Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220722130726.7627-2-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/iio/adc/mcp3911.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c index e573da5397bb..81eeb0084211 100644 --- a/drivers/iio/adc/mcp3911.c +++ b/drivers/iio/adc/mcp3911.c @@ -111,6 +111,8 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev, if (ret) goto out; + *val = sign_extend32(*val, 23); + ret = IIO_VAL_INT; break; -- 2.25.1
From: Lin Ma <linma@zju.edu.cn> stable inclusion from stable-v5.10.142 commit 23a29932715ca43bceb2eae1bdb770995afe7271 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit afe7116f6d3b888778ed6d95e3cf724767b9aedf ] There is a possible race condition (use-after-free) like below (FREE) | (USE) adf7242_remove | adf7242_channel cancel_delayed_work_sync | destroy_workqueue (1) | adf7242_cmd_rx | mod_delayed_work (2) | The root cause for this race is that the upper layer (ieee802154) is unaware of this detaching event and the function adf7242_channel can be called without any checks. To fix this, we can add a flag write at the beginning of adf7242_remove and add flag check in adf7242_channel. Or we can just defer the destructive operation like other commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") which let the ieee802154_unregister_hw() to handle the synchronization. This patch takes the second option. Fixes: 58e9683d1475 ("net: ieee802154: adf7242: Fix OCL calibration runs") Signed-off-by: Lin Ma <linma@zju.edu.cn> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20220808034224.12642-1-linma@zju.edu.cn Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ieee802154/adf7242.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c index 7db9cbd0f5de..07adbeec1978 100644 --- a/drivers/net/ieee802154/adf7242.c +++ b/drivers/net/ieee802154/adf7242.c @@ -1310,10 +1310,11 @@ static int adf7242_remove(struct spi_device *spi) debugfs_remove_recursive(lp->debugfs_root); + ieee802154_unregister_hw(lp->hw); + cancel_delayed_work_sync(&lp->work); destroy_workqueue(lp->wqueue); - ieee802154_unregister_hw(lp->hw); mutex_destroy(&lp->bmux); ieee802154_free_hw(lp->hw); -- 2.25.1
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> stable inclusion from stable-v5.10.142 commit 9276eb98cd087674257451c99e47f9c1ae678fc9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 6376ab02374822e1e8758a848ee736a182786a2e ] The module and function information can be added with 'modprobe foo dyndbg=+pmf' Suggested-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220616220559.136160-1-pierre-louis.bossart@linux... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/hda/intel-nhlt.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/sound/hda/intel-nhlt.c b/sound/hda/intel-nhlt.c index e2237239d922..5e04fedaec49 100644 --- a/sound/hda/intel-nhlt.c +++ b/sound/hda/intel-nhlt.c @@ -55,8 +55,8 @@ int intel_nhlt_get_dmic_geo(struct device *dev, struct nhlt_acpi_table *nhlt) /* find max number of channels based on format_configuration */ if (fmt_configs->fmt_count) { - dev_dbg(dev, "%s: found %d format definitions\n", - __func__, fmt_configs->fmt_count); + dev_dbg(dev, "found %d format definitions\n", + fmt_configs->fmt_count); for (i = 0; i < fmt_configs->fmt_count; i++) { struct wav_fmt_ext *fmt_ext; @@ -66,9 +66,9 @@ int intel_nhlt_get_dmic_geo(struct device *dev, struct nhlt_acpi_table *nhlt) if (fmt_ext->fmt.channels > max_ch) max_ch = fmt_ext->fmt.channels; } - dev_dbg(dev, "%s: max channels found %d\n", __func__, max_ch); + dev_dbg(dev, "max channels found %d\n", max_ch); } else { - dev_dbg(dev, "%s: No format information found\n", __func__); + dev_dbg(dev, "No format information found\n"); } if (cfg->device_config.config_type != NHLT_CONFIG_TYPE_MIC_ARRAY) { @@ -95,17 +95,16 @@ int intel_nhlt_get_dmic_geo(struct device *dev, struct nhlt_acpi_table *nhlt) } if (dmic_geo > 0) { - dev_dbg(dev, "%s: Array with %d dmics\n", __func__, dmic_geo); + dev_dbg(dev, "Array with %d dmics\n", dmic_geo); } if (max_ch > dmic_geo) { - dev_dbg(dev, "%s: max channels %d exceed dmic number %d\n", - __func__, max_ch, dmic_geo); + dev_dbg(dev, "max channels %d exceed dmic number %d\n", + max_ch, dmic_geo); } } } - dev_dbg(dev, "%s: dmic number %d max_ch %d\n", - __func__, dmic_geo, max_ch); + dev_dbg(dev, "dmic number %d max_ch %d\n", dmic_geo, max_ch); return dmic_geo; } -- 2.25.1
From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> stable inclusion from stable-v5.10.142 commit ddcb56e84130fac7d73f7473afc673f14a339cf2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2e6481a3f3ee6234ce577454e1d88aca55f51d47 ] The struct nhlt_format's fmt_config is a flexible array, it must not be used as normal array. When moving to the next nhlt_fmt_cfg we need to take into account the data behind the ->config.caps (indicated by ->config.size). Fixes: a864e8f159b13 ("ALSA: hda: intel-nhlt: verify config type") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com> Link: https://lore.kernel.org/r/20220823122405.18464-1-peter.ujfalusi@linux.intel.... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/hda/intel-nhlt.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/hda/intel-nhlt.c b/sound/hda/intel-nhlt.c index 5e04fedaec49..8714891f50b0 100644 --- a/sound/hda/intel-nhlt.c +++ b/sound/hda/intel-nhlt.c @@ -55,16 +55,22 @@ int intel_nhlt_get_dmic_geo(struct device *dev, struct nhlt_acpi_table *nhlt) /* find max number of channels based on format_configuration */ if (fmt_configs->fmt_count) { + struct nhlt_fmt_cfg *fmt_cfg = fmt_configs->fmt_config; + dev_dbg(dev, "found %d format definitions\n", fmt_configs->fmt_count); for (i = 0; i < fmt_configs->fmt_count; i++) { struct wav_fmt_ext *fmt_ext; - fmt_ext = &fmt_configs->fmt_config[i].fmt_ext; + fmt_ext = &fmt_cfg->fmt_ext; if (fmt_ext->fmt.channels > max_ch) max_ch = fmt_ext->fmt.channels; + + /* Move to the next nhlt_fmt_cfg */ + fmt_cfg = (struct nhlt_fmt_cfg *)(fmt_cfg->config.caps + + fmt_cfg->config.size); } dev_dbg(dev, "max channels found %d\n", max_ch); } else { -- 2.25.1
From: Dan Carpenter <dan.carpenter@oracle.com> stable inclusion from stable-v5.10.142 commit 6855efbaf54a9bff0871f0acedc6c63186ae6c58 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d776763f48084926b5d9e25507a3ddb7c9243d5e ] The return type is supposed to be ssize_t, which is signed long, but "r" was declared as unsigned int. This means that on 64 bit systems we return positive values instead of negative error codes. Fixes: 80a3511d70e8 ("cfg80211: add debugfs HT40 allow map") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/wireless/debugfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c index 76b845f68ac8..d80b06d66959 100644 --- a/net/wireless/debugfs.c +++ b/net/wireless/debugfs.c @@ -65,9 +65,10 @@ static ssize_t ht40allow_map_read(struct file *file, { struct wiphy *wiphy = file->private_data; char *buf; - unsigned int offset = 0, buf_size = PAGE_SIZE, i, r; + unsigned int offset = 0, buf_size = PAGE_SIZE, i; enum nl80211_band band; struct ieee80211_supported_band *sband; + ssize_t r; buf = kzalloc(buf_size, GFP_KERNEL); if (!buf) -- 2.25.1
From: Mathias Nyman <mathias.nyman@linux.intel.com> stable inclusion from stable-v5.10.142 commit c0cb63ee2e22df6440889d63875a025b678c7686 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8531aa1659f7278d4f2ec7408cc000eaa8d85217 ] This reverts commit 83810f84ecf11dfc5a9414a8b762c3501b328185. Turning off port power in shutdown did cause issues such as a laptop not proprly powering off, and some specific usb devies failing to enumerate the subsequent boot after a warm reset. So revert this. Fixes: 83810f84ecf1 ("xhci: turn off port power in shutdown") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci.c | 15 ++------------- drivers/usb/host/xhci.h | 2 -- 3 files changed, 3 insertions(+), 16 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 94adae8b19f0..1eb3b5deb940 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -566,7 +566,7 @@ struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd) * It will release and re-aquire the lock while calling ACPI * method. */ -void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, +static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, bool on, unsigned long *flags) __must_hold(&xhci->lock) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1c32b40b4316..8beb17c67d73 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -775,8 +775,6 @@ static void xhci_stop(struct usb_hcd *hcd) void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - unsigned long flags; - int i; if (xhci->quirks & XHCI_SPURIOUS_REBOOT) usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev)); @@ -792,21 +790,12 @@ void xhci_shutdown(struct usb_hcd *hcd) del_timer_sync(&xhci->shared_hcd->rh_timer); } - spin_lock_irqsave(&xhci->lock, flags); + spin_lock_irq(&xhci->lock); xhci_halt(xhci); - - /* Power off USB2 ports*/ - for (i = 0; i < xhci->usb2_rhub.num_ports; i++) - xhci_set_port_power(xhci, xhci->main_hcd, i, false, &flags); - - /* Power off USB3 ports*/ - for (i = 0; i < xhci->usb3_rhub.num_ports; i++) - xhci_set_port_power(xhci, xhci->shared_hcd, i, false, &flags); - /* Workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) xhci_reset(xhci, XHCI_RESET_SHORT_USEC); - spin_unlock_irqrestore(&xhci->lock, flags); + spin_unlock_irq(&xhci->lock); xhci_cleanup_msix(xhci); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index d8310788bc62..3380f17ebea2 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2164,8 +2164,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1); struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd); -void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, - bool on, unsigned long *flags); void xhci_hc_died(struct xhci_hcd *xhci); -- 2.25.1
From: Zhengchao Shao <shaozhengchao@huawei.com> stable inclusion from stable-v5.10.142 commit 699d82e9a6db29d509a71f1f2f4316231e6232e6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit b05972f01e7d30419987a1f221b5593668fd6448 ] The issue is the same to commit c2999f7fb05b ("net: sched: multiq: don't call qdisc_put() while holding tree lock"). Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Fixes: c266f64dbfa2 ("net: sched: protect block state with mutex") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220826013930.340121-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/sched/sch_tbf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index 78e79029dc63..6eb17004a9e4 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -342,6 +342,7 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt, struct nlattr *tb[TCA_TBF_MAX + 1]; struct tc_tbf_qopt *qopt; struct Qdisc *child = NULL; + struct Qdisc *old = NULL; struct psched_ratecfg rate; struct psched_ratecfg peak; u64 max_size; @@ -433,7 +434,7 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt, sch_tree_lock(sch); if (child) { qdisc_tree_flush_backlog(q->qdisc); - qdisc_put(q->qdisc); + old = q->qdisc; q->qdisc = child; } q->limit = qopt->limit; @@ -453,6 +454,7 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt, memcpy(&q->peak, &peak, sizeof(struct psched_ratecfg)); sch_tree_unlock(sch); + qdisc_put(old); err = 0; tbf_offload_change(sch); -- 2.25.1
From: Wang Hai <wanghai38@huawei.com> stable inclusion from stable-v5.10.142 commit 44dfa645895a56f65461249deb5b81cd16560e2a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ] In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails to attach qdisc because there is no memory in attach_one_default_qdisc(). Then dev->qdisc will be noop_qdisc by default. But the other queues may be able to successfully attach to default qdisc. In this case, the fallback to noqueue process will be triggered. If the original attached qdisc is not released and a new one is directly attached, this will cause netdevice reference leaks. The following is the bug log: veth0: default qdisc (fq_codel) fail, fallback to noqueue unregister_netdevice: waiting for veth0 to become free. Usage count = 32 leaked reference. qdisc_alloc+0x12e/0x210 qdisc_create_dflt+0x62/0x140 attach_one_default_qdisc.constprop.41+0x44/0x70 dev_activate+0x128/0x290 __dev_open+0x12a/0x190 __dev_change_flags+0x1a2/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x332/0x1150 __rtnl_newlink+0x52f/0x8e0 rtnl_newlink+0x43/0x70 rtnetlink_rcv_msg+0x140/0x3b0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1bb/0x290 netlink_sendmsg+0x37c/0x4e0 sock_sendmsg+0x5f/0x70 ____sys_sendmsg+0x208/0x280 Fix this bug by clearing any non-noop qdiscs that may have been assigned before trying to re-attach. Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail") Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/sched/sch_generic.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 68f1e89430b3..ecdd9e83f2f4 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -1057,6 +1057,21 @@ struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue, } EXPORT_SYMBOL(dev_graft_qdisc); +static void shutdown_scheduler_queue(struct net_device *dev, + struct netdev_queue *dev_queue, + void *_qdisc_default) +{ + struct Qdisc *qdisc = dev_queue->qdisc_sleeping; + struct Qdisc *qdisc_default = _qdisc_default; + + if (qdisc) { + rcu_assign_pointer(dev_queue->qdisc, qdisc_default); + dev_queue->qdisc_sleeping = qdisc_default; + + qdisc_put(qdisc); + } +} + static void attach_one_default_qdisc(struct net_device *dev, struct netdev_queue *dev_queue, void *_unused) @@ -1104,6 +1119,7 @@ static void attach_default_qdiscs(struct net_device *dev) if (qdisc == &noop_qdisc) { netdev_warn(dev, "default qdisc (%s) fail, fallback to %s\n", default_qdisc_ops->id, noqueue_qdisc_ops.id); + netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc); dev->priv_flags |= IFF_NO_QUEUE; netdev_for_each_tx_queue(dev, attach_one_default_qdisc, NULL); qdisc = txq->qdisc_sleeping; @@ -1357,21 +1373,6 @@ void dev_init_scheduler(struct net_device *dev) timer_setup(&dev->watchdog_timer, dev_watchdog, 0); } -static void shutdown_scheduler_queue(struct net_device *dev, - struct netdev_queue *dev_queue, - void *_qdisc_default) -{ - struct Qdisc *qdisc = dev_queue->qdisc_sleeping; - struct Qdisc *qdisc_default = _qdisc_default; - - if (qdisc) { - rcu_assign_pointer(dev_queue->qdisc, qdisc_default); - dev_queue->qdisc_sleeping = qdisc_default; - - qdisc_put(qdisc); - } -} - void dev_shutdown(struct net_device *dev) { netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc); -- 2.25.1
From: Duoming Zhou <duoming@zju.edu.cn> stable inclusion from stable-v5.10.142 commit 406d554844cccfd981845c068e0590acf6f643fa category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c0955bf957be4bead01fae1d791476260da7325d ] The function neigh_timer_handler() is a timer handler that runs in an atomic context. When used by rocker, neigh_timer_handler() calls "kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in atomic context bug will happen. One of the processes is shown below: ofdpa_fib4_add() ... neigh_add_timer() (wait a timer) neigh_timer_handler() neigh_release() neigh_destroy() rocker_port_neigh_destroy() rocker_world_port_neigh_destroy() ofdpa_port_neigh_destroy() ofdpa_port_ipv4_neigh() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: 00fc0c51e35b ("rocker: Change world_ops API and implementation to be switchdev independant") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/rocker/rocker_ofdpa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/rocker/rocker_ofdpa.c b/drivers/net/ethernet/rocker/rocker_ofdpa.c index 815766620979..e4d919de7e3f 100644 --- a/drivers/net/ethernet/rocker/rocker_ofdpa.c +++ b/drivers/net/ethernet/rocker/rocker_ofdpa.c @@ -1273,7 +1273,7 @@ static int ofdpa_port_ipv4_neigh(struct ofdpa_port *ofdpa_port, bool removing; int err = 0; - entry = kzalloc(sizeof(*entry), GFP_KERNEL); + entry = kzalloc(sizeof(*entry), GFP_ATOMIC); if (!entry) return -ENOMEM; -- 2.25.1
From: Cong Wang <cong.wang@bytedance.com> stable inclusion from stable-v5.10.142 commit 1b6666964ca1de93a7bf06e122bcf3616dbd33a9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8fc29ff3910f3af08a7c40a75d436b5720efe2bf ] strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away. Reported-and-tested-by: syzbot+9fc084a4348493ef65d2@syzkaller.appspotmail.com Reported-by: syzbot+e696806ef96cdd2d87cd@syzkaller.appspotmail.com Fixes: e5571240236c ("kcm: Check if sk_user_data already set in kcm_attach") Fixes: dff8baa26117 ("kcm: Call strp_stop before strp_done in kcm_attach") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20220827181314.193710-1-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/kcm/kcmsock.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c index 977f2de89dce..178f6a72d365 100644 --- a/net/kcm/kcmsock.c +++ b/net/kcm/kcmsock.c @@ -1411,12 +1411,6 @@ static int kcm_attach(struct socket *sock, struct socket *csock, psock->sk = csk; psock->bpf_prog = prog; - err = strp_init(&psock->strp, csk, &cb); - if (err) { - kmem_cache_free(kcm_psockp, psock); - goto out; - } - write_lock_bh(&csk->sk_callback_lock); /* Check if sk_user_data is aready by KCM or someone else. @@ -1424,13 +1418,18 @@ static int kcm_attach(struct socket *sock, struct socket *csock, */ if (csk->sk_user_data) { write_unlock_bh(&csk->sk_callback_lock); - strp_stop(&psock->strp); - strp_done(&psock->strp); kmem_cache_free(kcm_psockp, psock); err = -EALREADY; goto out; } + err = strp_init(&psock->strp, csk, &cb); + if (err) { + write_unlock_bh(&csk->sk_callback_lock); + kmem_cache_free(kcm_psockp, psock); + goto out; + } + psock->save_data_ready = csk->sk_data_ready; psock->save_write_space = csk->sk_write_space; psock->save_state_change = csk->sk_state_change; -- 2.25.1
From: Toke Høiland-Jørgensen <toke@toke.dk> stable inclusion from stable-v5.10.142 commit 870b6a15619c48cf1fcd5dd8c97d87b069501bbb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 90fabae8a2c225c4e4936723c38857887edde5cc ] When the GSO splitting feature of sch_cake is enabled, GSO superpackets will be broken up and the resulting segments enqueued in place of the original skb. In this case, CAKE calls consume_skb() on the original skb, but still returns NET_XMIT_SUCCESS. This can confuse parent qdiscs into assuming the original skb still exists, when it really has been freed. Fix this by adding the __NET_XMIT_STOLEN flag to the return value in this case. Fixes: 0c850344d388 ("sch_cake: Conditionally split GSO segments") Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231 Link: https://lore.kernel.org/r/20220831092103.442868-1-toke@toke.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/sched/sch_cake.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index c580139fcede..4e380534dbc9 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -1713,6 +1713,7 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch, } idx--; flow = &b->flows[idx]; + ret = NET_XMIT_SUCCESS; /* ensure shaper state isn't stale */ if (!b->tin_backlog) { @@ -1771,6 +1772,7 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch, qdisc_tree_reduce_backlog(sch, 1-numsegs, len-slen); consume_skb(skb); + ret |= __NET_XMIT_STOLEN; } else { /* not splitting */ cobalt_set_enqueue_time(skb, now); @@ -1904,7 +1906,7 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch, } b->drop_overlimit += dropped; } - return NET_XMIT_SUCCESS; + return ret; } static struct sk_buff *cake_dequeue_one(struct Qdisc *sch) -- 2.25.1
From: Eric Dumazet <edumazet@google.com> stable inclusion from stable-v5.10.142 commit f3d1554d0f67b7d0620b97032842735b3fdcdffe category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8c70521238b7863c2af607e20bcba20f974c969b ] challenge_timestamp can be read an written by concurrent threads. This was expected, but we need to annotate the race to avoid potential issues. Following patch moves challenge_timestamp and challenge_count to per-netns storage to provide better isolation. Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/ipv4/tcp_input.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index c62327b2714b..4d1ceca815a8 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3599,11 +3599,11 @@ static void tcp_send_challenge_ack(struct sock *sk, const struct sk_buff *skb) /* Then check host-wide RFC 5961 rate limit. */ now = jiffies / HZ; - if (now != challenge_timestamp) { + if (now != READ_ONCE(challenge_timestamp)) { u32 ack_limit = READ_ONCE(net->ipv4.sysctl_tcp_challenge_ack_limit); u32 half = (ack_limit + 1) >> 1; - challenge_timestamp = now; + WRITE_ONCE(challenge_timestamp, now); WRITE_ONCE(challenge_count, half + prandom_u32_max(ack_limit)); } count = READ_ONCE(challenge_count); -- 2.25.1
From: Jakub Kicinski <kuba@kernel.org> stable inclusion from stable-v5.10.142 commit d73b89c3b3f751681d927bac8cf7c2e7b93c8d84 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0b4f688d53fdc2a731b9d9cdf0c96255bc024ea6 ] This reverts commit 90fabae8a2c225c4e4936723c38857887edde5cc. Patch was applied hastily, revert and let the v2 be reviewed. Fixes: 90fabae8a2c2 ("sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb") Link: https://lore.kernel.org/all/87wnao2ha3.fsf@toke.dk/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/sched/sch_cake.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c index 4e380534dbc9..c580139fcede 100644 --- a/net/sched/sch_cake.c +++ b/net/sched/sch_cake.c @@ -1713,7 +1713,6 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch, } idx--; flow = &b->flows[idx]; - ret = NET_XMIT_SUCCESS; /* ensure shaper state isn't stale */ if (!b->tin_backlog) { @@ -1772,7 +1771,6 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch, qdisc_tree_reduce_backlog(sch, 1-numsegs, len-slen); consume_skb(skb); - ret |= __NET_XMIT_STOLEN; } else { /* not splitting */ cobalt_set_enqueue_time(skb, now); @@ -1906,7 +1904,7 @@ static s32 cake_enqueue(struct sk_buff *skb, struct Qdisc *sch, } b->drop_overlimit += dropped; } - return ret; + return NET_XMIT_SUCCESS; } static struct sk_buff *cake_dequeue_one(struct Qdisc *sch) -- 2.25.1
From: Yacan Liu <liuyacan@corp.netease.com> stable inclusion from stable-v5.10.142 commit e416fe7f16c19f223adccd2ca50d2113e57f23e1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit a8424a9b4522a3ab9f32175ad6d848739079071f ] For passive connections, the refcount increment has been done in smc_clcsock_accept()-->smc_sock_alloc(). Fixes: 3b2dec2603d5 ("net/smc: restructure client and server code in af_smc") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Link: https://lore.kernel.org/r/20220830152314.838736-1-liuyacan@corp.netease.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/smc/af_smc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 5d7710dd9514..41cbc7c89c9d 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1325,7 +1325,6 @@ static void smc_listen_out_connected(struct smc_sock *new_smc) { struct sock *newsmcsk = &new_smc->sk; - sk_refcnt_debug_inc(newsmcsk); if (newsmcsk->sk_state == SMC_INIT) newsmcsk->sk_state = SMC_ACTIVE; -- 2.25.1
From: Shenwei Wang <shenwei.wang@nxp.com> stable inclusion from stable-v5.10.142 commit 6ccd69141b9facbd6c23f53fef268c09344365b6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 846651eca073e2e02e37490a4a52752415d84781 upstream. The setting of RS485 RTS polarity is inverse in the current driver. When the property of 'rs485-rts-active-low' is enabled in the dts node, the RTS signal should be LOW during sending. Otherwise, if there is no such a property, the RTS should be HIGH during sending. Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485") Cc: stable <stable@kernel.org> Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/serial/fsl_lpuart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 52a603a6f9b8..9070741153e3 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1376,9 +1376,9 @@ static int lpuart32_config_rs485(struct uart_port *port, * Note: UART is assumed to be active high. */ if (rs485->flags & SER_RS485_RTS_ON_SEND) - modem &= ~UARTMODEM_TXRTSPOL; - else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) modem |= UARTMODEM_TXRTSPOL; + else if (rs485->flags & SER_RS485_RTS_AFTER_SEND) + modem &= ~UARTMODEM_TXRTSPOL; } /* Store the new configuration */ -- 2.25.1
From: Masahiro Yamada <masahiroy@kernel.org> stable inclusion from stable-v5.10.142 commit 7fd8d33adbba124c7032121b082031384f91d3eb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit c7acee3d2f128a38b68fb7af85dbbd91bfd0b4ad upstream. Christophe Leroy reported that commit 7b4537199a4a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") broke mpc85xx_defconfig + CONFIG_RELOCATABLE=y. LD vmlinux SYSMAP System.map SORTTAB vmlinux CHKREL vmlinux WARNING: 451 bad relocations c0b312a9 R_PPC_UADDR32 .head.text-0x3ff9ed54 c0b312ad R_PPC_UADDR32 .head.text-0x3ffac224 c0b312b1 R_PPC_UADDR32 .head.text-0x3ffb09f4 c0b312b5 R_PPC_UADDR32 .head.text-0x3fe184dc c0b312b9 R_PPC_UADDR32 .head.text-0x3fe183a8 ... The compiler emits a bunch of R_PPC_UADDR32, which is not supported by arch/powerpc/kernel/reloc_32.S. The reason is there exists an unaligned symbol. $ powerpc-linux-gnu-nm -n vmlinux ... c0b31258 d spe_aligninfo c0b31298 d __func__.0 c0b312a9 D sys_call_table c0b319b8 d __func__.0 Commit 7b4537199a4a is not the root cause. Even before that, I can reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y + CONFIG_MODVERSIONS=n. It is just that nobody noticed because when CONFIG_MODVERSIONS is enabled, a __crc_* symbol inserted before sys_call_table was hiding the unalignment issue. Adding alignment to the syscall table for ppc32 fixes the issue. Cc: stable@vger.kernel.org Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Trim change log discussion, add Cc stable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/lkml/38605f6a-a568-f884-f06f-ea4da5b214f0@csgroup.eu... Link: https://lore.kernel.org/r/20220820165129.1147589-1-masahiroy@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/powerpc/kernel/systbl.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S index d34276f3c495..b0a3063ab1b1 100644 --- a/arch/powerpc/kernel/systbl.S +++ b/arch/powerpc/kernel/systbl.S @@ -18,6 +18,7 @@ .p2align 3 #define __SYSCALL(nr, entry) .8byte entry #else + .p2align 2 #define __SYSCALL(nr, entry) .long entry #endif -- 2.25.1
From: Helge Deller <deller@gmx.de> stable inclusion from stable-v5.10.142 commit 989201bb8c00b222235aff04e6200230d29dc7bb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream. When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called. Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Tested-by: Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/vt/vt.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index a4d005fa2569..0252c0562dbc 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -4671,9 +4671,11 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op) console_lock(); if (vc->vc_mode != KD_TEXT) rc = -EINVAL; - else if (vc->vc_sw->con_font_set) + else if (vc->vc_sw->con_font_set) { + if (vc_is_sel(vc)) + clear_selection(); rc = vc->vc_sw->con_font_set(vc, &font, op->flags); - else + } else rc = -ENOSYS; console_unlock(); kfree(font.data); @@ -4700,9 +4702,11 @@ static int con_font_default(struct vc_data *vc, struct console_font_op *op) console_unlock(); return -EINVAL; } - if (vc->vc_sw->con_font_default) + if (vc->vc_sw->con_font_default) { + if (vc_is_sel(vc)) + clear_selection(); rc = vc->vc_sw->con_font_default(vc, &font, s); - else + } else rc = -ENOSYS; console_unlock(); if (!rc) { -- 2.25.1
From: Sherry Sun <sherry.sun@nxp.com> stable inclusion from stable-v5.10.142 commit b202400c9c9ef1643d6861e78fcd33eb95bff245 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit d5a2e0834364377a5d5a2fff1890a0b3f0bafd1f upstream. When the user initializes the uart port, and waits for the transmit engine to complete in lpuart32_set_termios(), if the UART TX fifo has dirty data and the UARTMODIR enable the flow control, the TX fifo may never be empty. So here we should disable the flow control first to make sure the transmit engin can complete. Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/serial/fsl_lpuart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 9070741153e3..a2c4eab0b470 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2138,6 +2138,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, uart_update_timeout(port, termios->c_cflag, baud); /* wait transmit engin complete */ + lpuart32_write(&sport->port, 0, UARTMODIR); lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC); /* disable transmit and receive */ -- 2.25.1
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> stable inclusion from stable-v5.10.142 commit b271090eea3899399e2adcf79c9c95367d472b03 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 98e01215708b6d416345465c09dce2bd4868c67a upstream. syzbot is reporting hung task at __input_unregister_device() [1], for iforce_close() waiting at wait_event_interruptible() with dev->mutex held is blocking input_disconnect_device() from __input_unregister_device(). It seems that the cause is simply that commit c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device") forgot to call wake_up() after clear_bit(). Fix this problem by introducing a helper that calls clear_bit() followed by wake_up_all(). Reported-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com> Fixes: c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device") Tested-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Co-developed-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/887021c3-4f13-40ce-c8b9-aa6e09faa3a7@I-love.SAKURA... Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/input/joystick/iforce/iforce-serio.c | 6 +++--- drivers/input/joystick/iforce/iforce-usb.c | 8 ++++---- drivers/input/joystick/iforce/iforce.h | 6 ++++++ 3 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/input/joystick/iforce/iforce-serio.c b/drivers/input/joystick/iforce/iforce-serio.c index f95a81b9fac7..2380546d7978 100644 --- a/drivers/input/joystick/iforce/iforce-serio.c +++ b/drivers/input/joystick/iforce/iforce-serio.c @@ -39,7 +39,7 @@ static void iforce_serio_xmit(struct iforce *iforce) again: if (iforce->xmit.head == iforce->xmit.tail) { - clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); + iforce_clear_xmit_and_wake(iforce); spin_unlock_irqrestore(&iforce->xmit_lock, flags); return; } @@ -64,7 +64,7 @@ static void iforce_serio_xmit(struct iforce *iforce) if (test_and_clear_bit(IFORCE_XMIT_AGAIN, iforce->xmit_flags)) goto again; - clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); + iforce_clear_xmit_and_wake(iforce); spin_unlock_irqrestore(&iforce->xmit_lock, flags); } @@ -169,7 +169,7 @@ static irqreturn_t iforce_serio_irq(struct serio *serio, iforce_serio->cmd_response_len = iforce_serio->len; /* Signal that command is done */ - wake_up(&iforce->wait); + wake_up_all(&iforce->wait); } else if (likely(iforce->type)) { iforce_process_packet(iforce, iforce_serio->id, iforce_serio->data_in, diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index ea58805c480f..cba92bd590a8 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -30,7 +30,7 @@ static void __iforce_usb_xmit(struct iforce *iforce) spin_lock_irqsave(&iforce->xmit_lock, flags); if (iforce->xmit.head == iforce->xmit.tail) { - clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); + iforce_clear_xmit_and_wake(iforce); spin_unlock_irqrestore(&iforce->xmit_lock, flags); return; } @@ -58,9 +58,9 @@ static void __iforce_usb_xmit(struct iforce *iforce) XMIT_INC(iforce->xmit.tail, n); if ( (n=usb_submit_urb(iforce_usb->out, GFP_ATOMIC)) ) { - clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); dev_warn(&iforce_usb->intf->dev, "usb_submit_urb failed %d\n", n); + iforce_clear_xmit_and_wake(iforce); } /* The IFORCE_XMIT_RUNNING bit is not cleared here. That's intended. @@ -175,15 +175,15 @@ static void iforce_usb_out(struct urb *urb) struct iforce *iforce = &iforce_usb->iforce; if (urb->status) { - clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); dev_dbg(&iforce_usb->intf->dev, "urb->status %d, exiting\n", urb->status); + iforce_clear_xmit_and_wake(iforce); return; } __iforce_usb_xmit(iforce); - wake_up(&iforce->wait); + wake_up_all(&iforce->wait); } static int iforce_usb_probe(struct usb_interface *intf, diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index 6aa761ebbdf7..9ccb9107ccbe 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -119,6 +119,12 @@ static inline int iforce_get_id_packet(struct iforce *iforce, u8 id, response_data, response_len); } +static inline void iforce_clear_xmit_and_wake(struct iforce *iforce) +{ + clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); + wake_up_all(&iforce->wait); +} + /* Public functions */ /* iforce-main.c */ int iforce_init_device(struct device *parent, u16 bustype, -- 2.25.1
From: Matti Vaittinen <mazziesaccount@gmail.com> stable inclusion from stable-v5.10.142 commit 89aa443437c69475d3ce7d4d56d4a56d14cde115 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 22b4277641c6823ec03d5b1cd82628e5e53e75b7 upstream. The ad7292 tries to add an devm_action for disabling a regulator at device detach using devm_add_action_or_reset(). The devm_add_action_or_reset() does call the release function should adding action fail. The driver inspects the value returned by devm_add_action_or_reset() and manually calls regulator_disable() if adding the action has failed. This leads to double disable and messes the enable count for regulator. Do not manually call disable if devm_add_action_or_reset() fails. Fixes: 506d2e317a0a ("iio: adc: Add driver support for AD7292") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Tested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/Yv9O+9sxU7gAv3vM@fedora Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/iio/adc/ad7292.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/iio/adc/ad7292.c b/drivers/iio/adc/ad7292.c index ab204e9199e9..3e6ece05854d 100644 --- a/drivers/iio/adc/ad7292.c +++ b/drivers/iio/adc/ad7292.c @@ -289,10 +289,8 @@ static int ad7292_probe(struct spi_device *spi) ret = devm_add_action_or_reset(&spi->dev, ad7292_regulator_disable, st); - if (ret) { - regulator_disable(st->reg); + if (ret) return ret; - } ret = regulator_get_voltage(st->reg); if (ret < 0) -- 2.25.1
From: Marcus Folkesson <marcus.folkesson@gmail.com> stable inclusion from stable-v5.10.142 commit 30fd0e23e373ba9edb4cc5bcc85bead94bfd4e22 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 9e2238e3ae40d371a1130226e0e740aa1601efa6 upstream. The ADC conversion is actually not rail-to-rail but with a factor 1.5. Make use of this factor when calculating actual voltage. Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911") Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220722130726.7627-4-marcus.folkesson@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/iio/adc/mcp3911.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c index 81eeb0084211..65278270a75c 100644 --- a/drivers/iio/adc/mcp3911.c +++ b/drivers/iio/adc/mcp3911.c @@ -38,8 +38,8 @@ #define MCP3911_CHANNEL(x) (MCP3911_REG_CHANNEL0 + x * 3) #define MCP3911_OFFCAL(x) (MCP3911_REG_OFFCAL_CH0 + x * 6) -/* Internal voltage reference in uV */ -#define MCP3911_INT_VREF_UV 1200000 +/* Internal voltage reference in mV */ +#define MCP3911_INT_VREF_MV 1200 #define MCP3911_REG_READ(reg, id) ((((reg) << 1) | ((id) << 5) | (1 << 0)) & 0xff) #define MCP3911_REG_WRITE(reg, id) ((((reg) << 1) | ((id) << 5) | (0 << 0)) & 0xff) @@ -137,11 +137,18 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev, *val = ret / 1000; } else { - *val = MCP3911_INT_VREF_UV; + *val = MCP3911_INT_VREF_MV; } - *val2 = 24; - ret = IIO_VAL_FRACTIONAL_LOG2; + /* + * For 24bit Conversion + * Raw = ((Voltage)/(Vref) * 2^23 * Gain * 1.5 + * Voltage = Raw * (Vref)/(2^23 * Gain * 1.5) + */ + + /* val2 = (2^23 * 1.5) */ + *val2 = 12582912; + ret = IIO_VAL_FRACTIONAL; break; } -- 2.25.1
From: Johan Hovold <johan+linaro@kernel.org> stable inclusion from stable-v5.10.142 commit c99bc901d5eb9fbdd7bd39f625e170ce97390336 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 9baa1415d9abdd1e08362ea2dcfadfacee8690b5 upstream. Add the missing sanity check on the probed-session count to avoid corrupting memory beyond the fixed-size slab-allocated session array when there are more than FASTRPC_MAX_SESSIONS sessions defined in the devicetree. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable@vger.kernel.org # 5.1 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220829080531.29681-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/misc/fastrpc.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c index 65f24b6150aa..cb19132971b5 100644 --- a/drivers/misc/fastrpc.c +++ b/drivers/misc/fastrpc.c @@ -1548,6 +1548,11 @@ static int fastrpc_cb_probe(struct platform_device *pdev) of_property_read_u32(dev->of_node, "qcom,nsessions", &sessions); spin_lock_irqsave(&cctx->lock, flags); + if (cctx->sesscount >= FASTRPC_MAX_SESSIONS) { + dev_err(&pdev->dev, "too many sessions\n"); + spin_unlock_irqrestore(&cctx->lock, flags); + return -ENOSPC; + } sess = &cctx->session[cctx->sesscount]; sess->used = false; sess->valid = true; -- 2.25.1
From: Johan Hovold <johan+linaro@kernel.org> stable inclusion from stable-v5.10.142 commit 5cf2a57c7a01a0d7bdecf875a63682f542891b1b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit d245f43aab2b61195d8ebb64cef7b5a08c590ab4 upstream. The probe session-duplication overflow check incremented the session count also when there were no more available sessions so that memory beyond the fixed-size slab-allocated session array could be corrupted in fastrpc_session_alloc() on open(). Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable@vger.kernel.org # 5.1 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220829080531.29681-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/misc/fastrpc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c index cb19132971b5..2c3142b4b5dd 100644 --- a/drivers/misc/fastrpc.c +++ b/drivers/misc/fastrpc.c @@ -1553,7 +1553,7 @@ static int fastrpc_cb_probe(struct platform_device *pdev) spin_unlock_irqrestore(&cctx->lock, flags); return -ENOSPC; } - sess = &cctx->session[cctx->sesscount]; + sess = &cctx->session[cctx->sesscount++]; sess->used = false; sess->valid = true; sess->dev = dev; @@ -1566,13 +1566,12 @@ static int fastrpc_cb_probe(struct platform_device *pdev) struct fastrpc_session_ctx *dup_sess; for (i = 1; i < sessions; i++) { - if (cctx->sesscount++ >= FASTRPC_MAX_SESSIONS) + if (cctx->sesscount >= FASTRPC_MAX_SESSIONS) break; - dup_sess = &cctx->session[cctx->sesscount]; + dup_sess = &cctx->session[cctx->sesscount++]; memcpy(dup_sess, sess, sizeof(*dup_sess)); } } - cctx->sesscount++; spin_unlock_irqrestore(&cctx->lock, flags); rc = dma_set_mask(dev, DMA_BIT_MASK(32)); if (rc) { -- 2.25.1
From: Niek Nooijens <niek.nooijens@omron.com> stable inclusion from stable-v5.10.142 commit 08fa8cb6df881dcbf0d5d3f445641d7da9f2d0b1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 001047ea241a9646010b2744451dfbc7289542f3 upstream. works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by: Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8f980fc6efc1..5480bacba39f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1045,6 +1045,8 @@ static const struct usb_device_id id_table_combined[] = { /* IDS GmbH devices */ { USB_DEVICE(IDS_VID, IDS_SI31A_PID) }, { USB_DEVICE(IDS_VID, IDS_CM31A_PID) }, + /* Omron devices */ + { USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) }, /* U-Blox devices */ { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) }, { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 4e92c165c86b..31c8ccabbbb7 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -661,6 +661,12 @@ #define INFINEON_TRIBOARD_TC1798_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ #define INFINEON_TRIBOARD_TC2X7_PID 0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */ +/* + * Omron corporation (https://www.omron.com) + */ + #define OMRON_VID 0x0590 + #define OMRON_CS1W_CIF31_PID 0x00b2 + /* * Acton Research Corp. */ -- 2.25.1
From: Colin Ian King <colin.i.king@gmail.com> stable inclusion from stable-v5.10.142 commit 5f1aee7f05d81963a295c55e7a63157ba1dd277f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 233f56745be446b289edac2ba8184c09365c005e ] There is a spelling mistake in a gvt_vgpu_err error message. Fix it. Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220315202449.2952845-1-colin.... Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/i915/gvt/handlers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 0b1ea29dcffa..606e6c315fe2 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -660,7 +660,7 @@ static int update_fdi_rx_iir_status(struct intel_vgpu *vgpu, else if (FDI_RX_IMR_TO_PIPE(offset) != INVALID_INDEX) index = FDI_RX_IMR_TO_PIPE(offset); else { - gvt_vgpu_err("Unsupport registers %x\n", offset); + gvt_vgpu_err("Unsupported registers %x\n", offset); return -EINVAL; } -- 2.25.1
From: Chen-Yu Tsai <wenst@chromium.org> stable inclusion from stable-v5.10.142 commit c0f0ed9ef9b625ca0584d54c55b3f8117cfabf47 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 35b0fac808b95eea1212f8860baf6ad25b88b087 ] In the previous commits that added CLK_OPS_PARENT_ENABLE, support for this flag was only added to rate change operations (rate setting and reparent) and disabling unused subtree. It was not added to the clock gate related operations. Any hardware driver that needs it for these operations will either see bogus results, or worse, hang. This has been seen on MT8192 and MT8195, where the imp_ii2_* clk drivers set this, but dumping debugfs clk_summary would cause it to hang. Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)") Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220822081424.1310926-2-wenst@chromium.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/clk.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 2e56cc0a3bce..4f20d5318183 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -203,6 +203,9 @@ static bool clk_core_rate_is_protected(struct clk_core *core) return core->protect_count; } +static int clk_core_prepare_enable(struct clk_core *core); +static void clk_core_disable_unprepare(struct clk_core *core); + static bool clk_core_is_prepared(struct clk_core *core) { bool ret = false; @@ -215,7 +218,11 @@ static bool clk_core_is_prepared(struct clk_core *core) return core->prepare_count; if (!clk_pm_runtime_get(core)) { + if (core->flags & CLK_OPS_PARENT_ENABLE) + clk_core_prepare_enable(core->parent); ret = core->ops->is_prepared(core->hw); + if (core->flags & CLK_OPS_PARENT_ENABLE) + clk_core_disable_unprepare(core->parent); clk_pm_runtime_put(core); } @@ -251,7 +258,13 @@ static bool clk_core_is_enabled(struct clk_core *core) } } + if (core->flags & CLK_OPS_PARENT_ENABLE) + clk_core_prepare_enable(core->parent); + ret = core->ops->is_enabled(core->hw); + + if (core->flags & CLK_OPS_PARENT_ENABLE) + clk_core_disable_unprepare(core->parent); done: if (core->rpm_enabled) pm_runtime_put(core->dev); @@ -818,6 +831,9 @@ int clk_rate_exclusive_get(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_rate_exclusive_get); +static int clk_core_enable_lock(struct clk_core *core); +static void clk_core_disable_lock(struct clk_core *core); + static void clk_core_unprepare(struct clk_core *core) { lockdep_assert_held(&prepare_lock); @@ -841,6 +857,9 @@ static void clk_core_unprepare(struct clk_core *core) WARN(core->enable_count > 0, "Unpreparing enabled %s\n", core->name); + if (core->flags & CLK_OPS_PARENT_ENABLE) + clk_core_enable_lock(core->parent); + trace_clk_unprepare(core); if (core->ops->unprepare) @@ -849,6 +868,9 @@ static void clk_core_unprepare(struct clk_core *core) clk_pm_runtime_put(core); trace_clk_unprepare_complete(core); + + if (core->flags & CLK_OPS_PARENT_ENABLE) + clk_core_disable_lock(core->parent); clk_core_unprepare(core->parent); } @@ -897,6 +919,9 @@ static int clk_core_prepare(struct clk_core *core) if (ret) goto runtime_put; + if (core->flags & CLK_OPS_PARENT_ENABLE) + clk_core_enable_lock(core->parent); + trace_clk_prepare(core); if (core->ops->prepare) @@ -904,6 +929,9 @@ static int clk_core_prepare(struct clk_core *core) trace_clk_prepare_complete(core); + if (core->flags & CLK_OPS_PARENT_ENABLE) + clk_core_disable_lock(core->parent); + if (ret) goto unprepare; } -- 2.25.1
From: Stephen Boyd <sboyd@kernel.org> stable inclusion from stable-v5.10.142 commit 4ff599df312fd84c3240b38a7cab026c99fe8d4b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit abb5f3f4b1f5f0ad50eb067a00051d3587dec9fb ] This reverts commit 35b0fac808b95eea1212f8860baf6ad25b88b087. Alexander reports that it causes boot failures on i.MX8M Plus based boards (specifically imx8mp-tqma8mpql-mba8mpxl.dts). Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Chen-Yu Tsai <wenst@chromium.org> Fixes: 35b0fac808b9 ("clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops") Link: https://lore.kernel.org/r/12115951.O9o76ZdvQC@steina-w Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220831175326.2523912-1-sboyd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/clk.c | 28 ---------------------------- 1 file changed, 28 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 4f20d5318183..2e56cc0a3bce 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -203,9 +203,6 @@ static bool clk_core_rate_is_protected(struct clk_core *core) return core->protect_count; } -static int clk_core_prepare_enable(struct clk_core *core); -static void clk_core_disable_unprepare(struct clk_core *core); - static bool clk_core_is_prepared(struct clk_core *core) { bool ret = false; @@ -218,11 +215,7 @@ static bool clk_core_is_prepared(struct clk_core *core) return core->prepare_count; if (!clk_pm_runtime_get(core)) { - if (core->flags & CLK_OPS_PARENT_ENABLE) - clk_core_prepare_enable(core->parent); ret = core->ops->is_prepared(core->hw); - if (core->flags & CLK_OPS_PARENT_ENABLE) - clk_core_disable_unprepare(core->parent); clk_pm_runtime_put(core); } @@ -258,13 +251,7 @@ static bool clk_core_is_enabled(struct clk_core *core) } } - if (core->flags & CLK_OPS_PARENT_ENABLE) - clk_core_prepare_enable(core->parent); - ret = core->ops->is_enabled(core->hw); - - if (core->flags & CLK_OPS_PARENT_ENABLE) - clk_core_disable_unprepare(core->parent); done: if (core->rpm_enabled) pm_runtime_put(core->dev); @@ -831,9 +818,6 @@ int clk_rate_exclusive_get(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_rate_exclusive_get); -static int clk_core_enable_lock(struct clk_core *core); -static void clk_core_disable_lock(struct clk_core *core); - static void clk_core_unprepare(struct clk_core *core) { lockdep_assert_held(&prepare_lock); @@ -857,9 +841,6 @@ static void clk_core_unprepare(struct clk_core *core) WARN(core->enable_count > 0, "Unpreparing enabled %s\n", core->name); - if (core->flags & CLK_OPS_PARENT_ENABLE) - clk_core_enable_lock(core->parent); - trace_clk_unprepare(core); if (core->ops->unprepare) @@ -868,9 +849,6 @@ static void clk_core_unprepare(struct clk_core *core) clk_pm_runtime_put(core); trace_clk_unprepare_complete(core); - - if (core->flags & CLK_OPS_PARENT_ENABLE) - clk_core_disable_lock(core->parent); clk_core_unprepare(core->parent); } @@ -919,9 +897,6 @@ static int clk_core_prepare(struct clk_core *core) if (ret) goto runtime_put; - if (core->flags & CLK_OPS_PARENT_ENABLE) - clk_core_enable_lock(core->parent); - trace_clk_prepare(core); if (core->ops->prepare) @@ -929,9 +904,6 @@ static int clk_core_prepare(struct clk_core *core) trace_clk_prepare_complete(core); - if (core->flags & CLK_OPS_PARENT_ENABLE) - clk_core_disable_lock(core->parent); - if (ret) goto unprepare; } -- 2.25.1
From: Chen-Yu Tsai <wenst@chromium.org> stable inclusion from stable-v5.10.142 commit e2945f936cc422715a1e03673f59734231f433f2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 4b592061f7b3971c70e8b72fc42aaead47c24701 ] In the original commit 9a34b45397e5 ("clk: Add support for runtime PM"), the commit message mentioned that pm_runtime_put_sync() would be done at the end of clk_core_unprepare(). This mirrors the operations in clk_core_prepare() in the opposite order. However, the actual code that was added wasn't in the order the commit message described. Move clk_pm_runtime_put() to the end of clk_core_unprepare() so that it is in the correct order. Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220822081424.1310926-3-wenst@chromium.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/clk.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 2e56cc0a3bce..b355d3d40f63 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -846,10 +846,9 @@ static void clk_core_unprepare(struct clk_core *core) if (core->ops->unprepare) core->ops->unprepare(core->hw); - clk_pm_runtime_put(core); - trace_clk_unprepare_complete(core); clk_core_unprepare(core->parent); + clk_pm_runtime_put(core); } static void clk_core_unprepare_lock(struct clk_core *core) -- 2.25.1
From: Peter Robinson <pbrobinson@gmail.com> stable inclusion from stable-v5.10.142 commit e32982115d48081f33f94d20a620613a34bd08ed category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ] Add the module alias so the rk805-pwrkey driver will autoload when built as a module. Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/input/misc/rk805-pwrkey.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/misc/rk805-pwrkey.c b/drivers/input/misc/rk805-pwrkey.c index 3fb64dbda1a2..76873aa005b4 100644 --- a/drivers/input/misc/rk805-pwrkey.c +++ b/drivers/input/misc/rk805-pwrkey.c @@ -98,6 +98,7 @@ static struct platform_driver rk805_pwrkey_driver = { }; module_platform_driver(rk805_pwrkey_driver); +MODULE_ALIAS("platform:rk805-pwrkey"); MODULE_AUTHOR("Joseph Chen <chenjh@rock-chips.com>"); MODULE_DESCRIPTION("RK805 PMIC Power Key driver"); MODULE_LICENSE("GPL"); -- 2.25.1
From: Stefan Wahren <stefan.wahren@i2se.com> stable inclusion from stable-v5.10.142 commit 00d8bc0c16edfaaf117aad0c6358ec549015413c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 35f73cca1cecda0c1f8bb7d8be4ce5cd2d46ae8c ] The function raspberrypi_fw_get_rate (e.g. used for the recalc_rate hook) can fail to get the clock rate from the firmware. In this case we cannot return a signed error value, which would be casted to unsigned long. Fix this by returning 0 instead. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220625083643.4012-1-stefan.wahren@i2se.com Fixes: 4e85e535e6cc ("clk: bcm283x: add driver interfacing with Raspberry Pi's firmware") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/bcm/clk-raspberrypi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index f89b9cfc4309..2c12bd5ac138 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -139,7 +139,7 @@ static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw, ret = raspberrypi_clock_property(rpi->firmware, data, RPI_FIRMWARE_GET_CLOCK_RATE, &val); if (ret) - return ret; + return 0; return val; } -- 2.25.1
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> stable inclusion from stable-v5.10.142 commit 8c90a3e0d38272c0c7efaf43dc235e75c9a3bc77 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit b7fa6242f3e035308a76284560e4f918dad9b017 ] We should have 'n', then 'size', not the opposite. This is harmless because the 2 values are just multiplied, but having the correct order silence a (unpublished yet) smatch warning. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/49d726d11964ca0e3757bdb5659e3b3eaa1572b5.165308164... Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/bcm/clk-raspberrypi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index 2c12bd5ac138..ff87305cbe9d 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -252,7 +252,7 @@ static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi, int ret; clks = devm_kcalloc(rpi->dev, - sizeof(*clks), RPI_FIRMWARE_NUM_CLK_ID, + RPI_FIRMWARE_NUM_CLK_ID, sizeof(*clks), GFP_KERNEL); if (!clks) return -ENOMEM; -- 2.25.1
From: Stefan Wahren <stefan.wahren@i2se.com> stable inclusion from stable-v5.10.142 commit fcae47b2d23c81603b01f56cf8db63ed64599d34 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit bc163555603e4ae9c817675ad80d618a4cdbfa2d ] The while loop in raspberrypi_discover_clocks() relies on the assumption that the id of the last clock element is zero. Because this data comes from the Videocore firmware and it doesn't guarantuee such a behavior this could lead to out-of-bounds access. So fix this by providing a sentinel element. Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks") Link: https://github.com/raspberrypi/firmware/issues/1688 Suggested-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220713154953.3336-2-stefan.wahren@i2se.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/bcm/clk-raspberrypi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index ff87305cbe9d..27ae08c4952e 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -251,8 +251,13 @@ static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi, struct rpi_firmware_get_clocks_response *clks; int ret; + /* + * The firmware doesn't guarantee that the last element of + * RPI_FIRMWARE_GET_CLOCKS is zeroed. So allocate an additional + * zero element as sentinel. + */ clks = devm_kcalloc(rpi->dev, - RPI_FIRMWARE_NUM_CLK_ID, sizeof(*clks), + RPI_FIRMWARE_NUM_CLK_ID + 1, sizeof(*clks), GFP_KERNEL); if (!clks) return -ENOMEM; -- 2.25.1
From: Stefan Wahren <stefan.wahren@i2se.com> stable inclusion from stable-v5.10.142 commit a971343557ffb573411cb227f5b305b62c90da41 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 13b5cf8d6a0d4a5d289e1ed046cadc63b416db85 ] Some log messages lacks the final newline. So add them. Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220713154953.3336-3-stefan.wahren@i2se.com Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ivan T. Ivanov <iivanov@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/bcm/clk-raspberrypi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index 27ae08c4952e..969227e2df21 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -156,7 +156,7 @@ static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate, ret = raspberrypi_clock_property(rpi->firmware, data, RPI_FIRMWARE_SET_CLOCK_RATE, &_rate); if (ret) - dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d", + dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d\n", clk_hw_get_name(hw), ret); return ret; @@ -208,7 +208,7 @@ static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi, RPI_FIRMWARE_GET_MIN_CLOCK_RATE, &min_rate); if (ret) { - dev_err(rpi->dev, "Failed to get clock %d min freq: %d", + dev_err(rpi->dev, "Failed to get clock %d min freq: %d\n", id, ret); return ERR_PTR(ret); } -- 2.25.1
From: Armin Wolf <W_Armin@gmx.de> stable inclusion from stable-v5.10.142 commit 517dba798793e69b510779c3cde7224a65f3ed1d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit f233d2be38dbbb22299192292983037f01ab363c ] The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end trace 8ded4c918658445b ]--- Fix this by checking the cooling state and return an error if it exceeds the maximum cooling state. Tested on a Raspberry Pi 3. Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/hwmon/gpio-fan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c index 3ea4021f267c..d96e435cc42b 100644 --- a/drivers/hwmon/gpio-fan.c +++ b/drivers/hwmon/gpio-fan.c @@ -391,6 +391,9 @@ static int gpio_fan_set_cur_state(struct thermal_cooling_device *cdev, if (!fan_data) return -EINVAL; + if (state >= fan_data->num_speed) + return -EINVAL; + set_fan_speed(fan_data, state); return 0; } -- 2.25.1
From: Haibo Chen <haibo.chen@nxp.com> stable inclusion from stable-v5.10.142 commit 7efcbac55aadd83d616361746d8bb1aabc7ffcdb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 518e26f11af2fe4f5bebf9a0351595d508c7077f ] The regcache sync will set the cache_bypass = true, at that time, when there is regmap write operation, it will bypass the regmap cache, then the regcache sync will write back the value from cache to register, which is not as our expectation. Though regmap already use its internal lock to avoid such issue, but this driver force disable the regmap internal lock in its regmap config: disable_locking = true To avoid this issue, use the driver's own lock to do the protect in system PM. Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpio/gpio-pca953x.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 957be5f69406..3ad1a9e432c8 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -1162,7 +1162,9 @@ static int pca953x_suspend(struct device *dev) { struct pca953x_chip *chip = dev_get_drvdata(dev); + mutex_lock(&chip->i2c_lock); regcache_cache_only(chip->regmap, true); + mutex_unlock(&chip->i2c_lock); if (atomic_read(&chip->wakeup_path)) device_set_wakeup_path(dev); @@ -1185,13 +1187,17 @@ static int pca953x_resume(struct device *dev) } } + mutex_lock(&chip->i2c_lock); regcache_cache_only(chip->regmap, false); regcache_mark_dirty(chip->regmap); ret = pca953x_regcache_sync(dev); - if (ret) + if (ret) { + mutex_unlock(&chip->i2c_lock); return ret; + } ret = regcache_sync(chip->regmap); + mutex_unlock(&chip->i2c_lock); if (ret) { dev_err(dev, "Failed to restore register map: %d\n", ret); return ret; -- 2.25.1
From: Jim Mattson <jmattson@google.com> stable inclusion from stable-v5.10.142 commit eb0c614c426c5837808b924b0525c23b1d1ab164 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0204750bd4c6ccc2fb7417618477f10373b33f56 ] KVM should not claim to virtualize unknown IA32_ARCH_CAPABILITIES bits. When kvm_get_arch_capabilities() was originally written, there were only a few bits defined in this MSR, and KVM could virtualize all of them. However, over the years, several bits have been defined that KVM cannot just blindly pass through to the guest without additional work (such as virtualizing an MSR promised by the IA32_ARCH_CAPABILITES feature bit). Define a mask of supported IA32_ARCH_CAPABILITIES bits, and mask off any other bits that are set in the hardware MSR. Cc: Paolo Bonzini <pbonzini@redhat.com> Fixes: 5b76a3cff011 ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20220830174947.2182144-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/x86/kvm/x86.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index bdc7b9c1f82a..52605740b1da 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1435,12 +1435,32 @@ static const u32 msr_based_features_all[] = { static u32 msr_based_features[ARRAY_SIZE(msr_based_features_all)]; static unsigned int num_msr_based_features; +/* + * Some IA32_ARCH_CAPABILITIES bits have dependencies on MSRs that KVM + * does not yet virtualize. These include: + * 10 - MISC_PACKAGE_CTRLS + * 11 - ENERGY_FILTERING_CTL + * 12 - DOITM + * 18 - FB_CLEAR_CTRL + * 21 - XAPIC_DISABLE_STATUS + * 23 - OVERCLOCKING_STATUS + */ + +#define KVM_SUPPORTED_ARCH_CAP \ + (ARCH_CAP_RDCL_NO | ARCH_CAP_IBRS_ALL | ARCH_CAP_RSBA | \ + ARCH_CAP_SKIP_VMENTRY_L1DFLUSH | ARCH_CAP_SSB_NO | ARCH_CAP_MDS_NO | \ + ARCH_CAP_PSCHANGE_MC_NO | ARCH_CAP_TSX_CTRL_MSR | ARCH_CAP_TAA_NO | \ + ARCH_CAP_SBDR_SSDP_NO | ARCH_CAP_FBSDP_NO | ARCH_CAP_PSDP_NO | \ + ARCH_CAP_FB_CLEAR | ARCH_CAP_RRSBA | ARCH_CAP_PBRSB_NO) + static u64 kvm_get_arch_capabilities(void) { u64 data = 0; - if (boot_cpu_has(X86_FEATURE_ARCH_CAPABILITIES)) + if (boot_cpu_has(X86_FEATURE_ARCH_CAPABILITIES)) { rdmsrl(MSR_IA32_ARCH_CAPABILITIES, data); + data &= KVM_SUPPORTED_ARCH_CAP; + } /* * If nx_huge_pages is enabled, KVM's shadow paging will ensure that @@ -1488,9 +1508,6 @@ static u64 kvm_get_arch_capabilities(void) */ } - /* Guests don't need to know "Fill buffer clear control" exists */ - data &= ~ARCH_CAP_FB_CLEAR_CTRL; - return data; } -- 2.25.1
From: Dan Carpenter <dan.carpenter@oracle.com> stable inclusion from stable-v5.10.142 commit 5d0d46e6255aa87bbca0e6831648dcecd2a7ebfd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e9ea0b30ada008f4e65933f449db6894832cb242 ] The change from kcalloc() to kvmalloc() means that arg->nr_pages might now be large enough that the "args->nr_pages << PAGE_SHIFT" can result in an integer overflow. Fixes: b3f7931f5c61 ("xen/gntdev: switch from kcalloc() to kvcalloc()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/YxDROJqu/RPvR0bi@kili Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/xen/grant-table.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 5c83d41766c8..0a2d24d6ac6f 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -981,6 +981,9 @@ int gnttab_dma_alloc_pages(struct gnttab_dma_alloc_args *args) size_t size; int i, ret; + if (args->nr_pages < 0 || args->nr_pages > (INT_MAX >> PAGE_SHIFT)) + return -ENOMEM; + size = args->nr_pages << PAGE_SHIFT; if (args->coherent) args->vaddr = dma_alloc_coherent(args->dev, size, -- 2.25.1
From: Steven Price <steven.price@arm.com> stable inclusion from stable-v5.10.142 commit 47a73e5e6ba42e42db2d1400478b2e132e25ceb4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8782fb61cc848364e1e1599d76d3c9dd58a1cc06 ] The mmap lock protects the page walker from changes to the page tables during the walk. However a read lock is insufficient to protect those areas which don't have a VMA as munmap() detaches the VMAs before downgrading to a read lock and actually tearing down PTEs/page tables. For users of walk_page_range() the solution is to simply call pte_hole() immediately without checking the actual page tables when a VMA is not present. We now never call __walk_page_range() without a valid vma. For walk_page_range_novma() the locking requirements are tightened to require the mmap write lock to be taken, and then walking the pgd directly with 'no_vma' set. This in turn means that all page walkers either have a valid vma, or it's that special 'novma' case for page table debugging. As a result, all the odd '(!walk->vma && !walk->no_vma)' tests can be removed. Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/riscv/mm/pageattr.c | 4 ++-- mm/pagewalk.c | 21 ++++++++++++--------- mm/ptdump.c | 4 ++-- 3 files changed, 16 insertions(+), 13 deletions(-) diff --git a/arch/riscv/mm/pageattr.c b/arch/riscv/mm/pageattr.c index 19fecb362d81..09f6be19ba7b 100644 --- a/arch/riscv/mm/pageattr.c +++ b/arch/riscv/mm/pageattr.c @@ -118,10 +118,10 @@ static int __set_memory(unsigned long addr, int numpages, pgprot_t set_mask, if (!numpages) return 0; - mmap_read_lock(&init_mm); + mmap_write_lock(&init_mm); ret = walk_page_range_novma(&init_mm, start, end, &pageattr_ops, NULL, &masks); - mmap_read_unlock(&init_mm); + mmap_write_unlock(&init_mm); flush_tlb_kernel_range(start, end); diff --git a/mm/pagewalk.c b/mm/pagewalk.c index a17fbd56b968..6a4212cf00ba 100644 --- a/mm/pagewalk.c +++ b/mm/pagewalk.c @@ -71,7 +71,7 @@ static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end, do { again: next = pmd_addr_end(addr, end); - if (pmd_none(*pmd) || (!walk->vma && !walk->no_vma)) { + if (pmd_none(*pmd)) { if (ops->pte_hole) err = ops->pte_hole(addr, next, depth, walk); if (err) @@ -129,7 +129,7 @@ static int walk_pud_range(p4d_t *p4d, unsigned long addr, unsigned long end, do { again: next = pud_addr_end(addr, end); - if (pud_none(*pud) || (!walk->vma && !walk->no_vma)) { + if (pud_none(*pud)) { if (ops->pte_hole) err = ops->pte_hole(addr, next, depth, walk); if (err) @@ -318,19 +318,19 @@ static int __walk_page_range(unsigned long start, unsigned long end, struct vm_area_struct *vma = walk->vma; const struct mm_walk_ops *ops = walk->ops; - if (vma && ops->pre_vma) { + if (ops->pre_vma) { err = ops->pre_vma(start, end, walk); if (err) return err; } - if (vma && is_vm_hugetlb_page(vma)) { + if (is_vm_hugetlb_page(vma)) { if (ops->hugetlb_entry) err = walk_hugetlb_range(start, end, walk); } else err = walk_pgd_range(start, end, walk); - if (vma && ops->post_vma) + if (ops->post_vma) ops->post_vma(walk); return err; @@ -402,9 +402,13 @@ int walk_page_range(struct mm_struct *mm, unsigned long start, if (!vma) { /* after the last vma */ walk.vma = NULL; next = end; + if (ops->pte_hole) + err = ops->pte_hole(start, next, -1, &walk); } else if (start < vma->vm_start) { /* outside vma */ walk.vma = NULL; next = min(end, vma->vm_start); + if (ops->pte_hole) + err = ops->pte_hole(start, next, -1, &walk); } else { /* inside vma */ walk.vma = vma; next = min(end, vma->vm_end); @@ -422,9 +426,8 @@ int walk_page_range(struct mm_struct *mm, unsigned long start, } if (err < 0) break; - } - if (walk.vma || walk.ops->pte_hole) err = __walk_page_range(start, next, &walk); + } if (err) break; } while (start = next, start < end); @@ -453,9 +456,9 @@ int walk_page_range_novma(struct mm_struct *mm, unsigned long start, if (start >= end || !walk.mm) return -EINVAL; - mmap_assert_locked(walk.mm); + mmap_assert_write_locked(walk.mm); - return __walk_page_range(start, end, &walk); + return walk_pgd_range(start, end, &walk); } int walk_page_vma(struct vm_area_struct *vma, const struct mm_walk_ops *ops, diff --git a/mm/ptdump.c b/mm/ptdump.c index 43661863096b..5508036858b5 100644 --- a/mm/ptdump.c +++ b/mm/ptdump.c @@ -149,13 +149,13 @@ void ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm, pgd_t *pgd) { const struct ptdump_range *range = st->range; - mmap_read_lock(mm); + mmap_write_lock(mm); while (range->start != range->end) { walk_page_range_novma(mm, range->start, range->end, &ptdump_ops, pgd, st); range++; } - mmap_read_unlock(mm); + mmap_write_unlock(mm); /* Flush out the last page */ st->note_page(st, 0, -1, 0); -- 2.25.1
From: SeongJae Park <sj@kernel.org> stable inclusion from stable-v5.10.142 commit aa45c507037a617409fef8566d0e71ee6aa91935 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 06ba5d2e943e97bb66e75c152e87f1d2c7027a67 upstream. The advertisement of the persistent grants feature (writing 'feature-persistent' to xenbus) should mean not the decision for using the feature but only the availability of the feature. However, commit aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") made a field of blkback, which was a place for saving only the negotiation result, to be used for yet another purpose: caching of the 'feature_persistent' parameter value. As a result, the advertisement, which should follow only the parameter value, becomes inconsistent. This commit fixes the misuse of the semantic by making blkback saves the parameter value in a separate place and advertises the support based on only the saved value. Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Suggested-by: Juergen Gross <jgross@suse.com> Signed-off-by: SeongJae Park <sj@kernel.org> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220831165824.94815-2-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/block/xen-blkback/common.h | 3 +++ drivers/block/xen-blkback/xenbus.c | 6 ++++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 040829e2d016..5eff34767b77 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -226,6 +226,9 @@ struct xen_vbd { sector_t size; unsigned int flush_support:1; unsigned int discard_secure:1; + /* Connect-time cached feature_persistent parameter value */ + unsigned int feature_gnt_persistent_parm:1; + /* Persistent grants feature negotiation result */ unsigned int feature_gnt_persistent:1; unsigned int overflow_max_grants:1; }; diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 44782b15b9fd..ddea36295931 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -911,7 +911,7 @@ static void connect(struct backend_info *be) xen_blkbk_barrier(xbt, be, be->blkif->vbd.flush_support); err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u", - be->blkif->vbd.feature_gnt_persistent); + be->blkif->vbd.feature_gnt_persistent_parm); if (err) { xenbus_dev_fatal(dev, err, "writing %s/feature-persistent", dev->nodename); @@ -1089,7 +1089,9 @@ static int connect_ring(struct backend_info *be) return -ENOSYS; } - blkif->vbd.feature_gnt_persistent = feature_persistent && + blkif->vbd.feature_gnt_persistent_parm = feature_persistent; + blkif->vbd.feature_gnt_persistent = + blkif->vbd.feature_gnt_persistent_parm && xenbus_read_unsigned(dev->otherend, "feature-persistent", 0); blkif->vbd.overflow_max_grants = 0; -- 2.25.1
From: SeongJae Park <sj@kernel.org> stable inclusion from stable-v5.10.142 commit f210912d1aa91e7c16f9dab7b2a43f1134db23da category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 9f5e0fe5d05f7e8de7f39b2b10089834eb0ff787 upstream. The advertisement of the persistent grants feature (writing 'feature-persistent' to xenbus) should mean not the decision for using the feature but only the availability of the feature. However, commit 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants") made a field of blkfront, which was a place for saving only the negotiation result, to be used for yet another purpose: caching of the 'feature_persistent' parameter value. As a result, the advertisement, which should follow only the parameter value, becomes inconsistent. This commit fixes the misuse of the semantic by making blkfront saves the parameter value in a separate place and advertises the support based on only the saved value. Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Suggested-by: Juergen Gross <jgross@suse.com> Signed-off-by: SeongJae Park <sj@kernel.org> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220831165824.94815-3-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/block/xen-blkfront.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 03e079a6f072..9d5460f6e0ff 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -211,6 +211,9 @@ struct blkfront_info unsigned int feature_fua:1; unsigned int feature_discard:1; unsigned int feature_secdiscard:1; + /* Connect-time cached feature_persistent parameter */ + unsigned int feature_persistent_parm:1; + /* Persistent grants feature negotiation result */ unsigned int feature_persistent:1; unsigned int bounce:1; unsigned int discard_granularity; @@ -1941,7 +1944,7 @@ static int talk_to_blkback(struct xenbus_device *dev, goto abort_transaction; } err = xenbus_printf(xbt, dev->nodename, "feature-persistent", "%u", - info->feature_persistent); + info->feature_persistent_parm); if (err) dev_warn(&dev->dev, "writing persistent grants feature to xenbus"); @@ -2391,7 +2394,8 @@ static void blkfront_gather_backend_features(struct blkfront_info *info) if (xenbus_read_unsigned(info->xbdev->otherend, "feature-discard", 0)) blkfront_setup_discard(info); - if (feature_persistent) + info->feature_persistent_parm = feature_persistent; + if (info->feature_persistent_parm) info->feature_persistent = !!xenbus_read_unsigned(info->xbdev->otherend, "feature-persistent", 0); -- 2.25.1
From: Mika Westerberg <mika.westerberg@linux.intel.com> stable inclusion from stable-v5.10.142 commit 07fb6b10b64a409aa6fd69b01e32bb278adc52c2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit eb100b8fa8e8b59eb3e5fc7a5fd4a1e3c5950f64 upstream. The received notification packet is held in pkg->buffer and not in pkg itself. Fix this by using the correct buffer. Fixes: 81a54b5e1986 ("thunderbolt: Let the connection manager handle all notifications") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/thunderbolt/ctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c index 9894b8f63064..772acb190f50 100644 --- a/drivers/thunderbolt/ctl.c +++ b/drivers/thunderbolt/ctl.c @@ -396,7 +396,7 @@ static void tb_ctl_rx_submit(struct ctl_pkg *pkg) static int tb_async_error(const struct ctl_pkg *pkg) { - const struct cfg_error_pkg *error = (const struct cfg_error_pkg *)pkg; + const struct cfg_error_pkg *error = pkg->buffer; if (pkg->frame.eof != TB_CFG_PKG_ERROR) return false; -- 2.25.1
From: Mathias Nyman <mathias.nyman@linux.intel.com> stable inclusion from stable-v5.10.142 commit 5a603f4c127377dde986fe86670972e94312ae51 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream. After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-hub.c | 11 +++++++++++ drivers/usb/host/xhci.c | 4 +++- drivers/usb/host/xhci.h | 2 +- 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 1eb3b5deb940..7bb306741807 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1561,6 +1561,17 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) status = bus_state->resuming_ports; + /* + * SS devices are only visible to roothub after link training completes. + * Keep polling roothubs for a grace period after xHC start + */ + if (xhci->run_graceperiod) { + if (time_before(jiffies, xhci->run_graceperiod)) + status = 1; + else + xhci->run_graceperiod = 0; + } + mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC; /* For each port, did anything change? If so, set that bit in buf. */ diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8beb17c67d73..e390f64d0f04 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -149,9 +149,11 @@ int xhci_start(struct xhci_hcd *xhci) xhci_err(xhci, "Host took too long to start, " "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); - if (!ret) + if (!ret) { /* clear state flags. Including dying, halted or removing */ xhci->xhc_state = 0; + xhci->run_graceperiod = jiffies + msecs_to_jiffies(500); + } return ret; } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3380f17ebea2..02772b274224 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1816,7 +1816,7 @@ struct xhci_hcd { /* Host controller watchdog timer structures */ unsigned int xhc_state; - + unsigned long run_graceperiod; u32 command; struct s3_save s3; /* Host controller is dying - not responding to commands. "I'm not dead yet!" -- 2.25.1
From: Johan Hovold <johan@kernel.org> stable inclusion from stable-v5.10.142 commit e547c07c2848349d5cba21d22411dd049980401d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit ceb4038472a4803e7046ed488b03d11551991514 upstream. Add the device id for Decagon Devices USB Cable Adapter. Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-16615... Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 067b206bd252..6b5ba6180c30 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -134,6 +134,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ + { USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ -- 2.25.1
From: Yan Xinyu <sdlyyxy@bupt.edu.cn> stable inclusion from stable-v5.10.142 commit efcc3e1e6a5a093a2fa99fa3ab8e3df6285e982d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream. Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 76a5f20a8b74..bd296c8a230f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -577,6 +577,10 @@ static void option_instat_callback(struct urb *urb); #define WETELECOM_PRODUCT_6802 0x6802 #define WETELECOM_PRODUCT_WMD300 0x6803 +/* OPPO products */ +#define OPPO_VENDOR_ID 0x22d9 +#define OPPO_PRODUCT_R11 0x276c + /* Device flags */ @@ -2160,6 +2164,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ + { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- 2.25.1
From: Yonglin Tan <yonglin.tan@outlook.com> stable inclusion from stable-v5.10.142 commit 7f1f1767151789871547b5d4e9f0fec2fd2a313d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit f766f3abe6dbc9bf8b56a5d53c87e5a17942c154 upstream. Add usb product id entry for the Quectel EM060K module. "MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EM060K-GL S: SerialNumber=89fb57db C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com> [ johan: mention QDSS port and sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bd296c8a230f..9b15e7b9b3bc 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -257,6 +257,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM05G 0x030a +#define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 @@ -1147,6 +1148,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) }, { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff), .driver_info = RSVD(6) | ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, -- 2.25.1
From: Slark Xiao <slark_xiao@163.com> stable inclusion from stable-v5.10.142 commit 89b01a88ef7dd936e658d696979217c04ba8d71f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 8ffe20d08f2c95d702c453020d03a4c568a988f0 upstream. We added PIDs for MV32-WA/WB MBIM mode before, now we need to add support for RmNet mode. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> [ johan: sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9b15e7b9b3bc..f55040f28055 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -443,6 +443,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_MV31_2_RMNET 0x00b9 #define CINTERION_PRODUCT_MV32_WA 0x00f1 #define CINTERION_PRODUCT_MV32_WB 0x00f2 +#define CINTERION_PRODUCT_MV32_WA_RMNET 0x00f3 +#define CINTERION_PRODUCT_MV32_WB_RMNET 0x00f4 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -2006,8 +2008,12 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0)}, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff), .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA_RMNET, 0xff), + .driver_info = RSVD(0) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff), .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB_RMNET, 0xff), + .driver_info = RSVD(0) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100), .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120), -- 2.25.1
From: Pablo Sun <pablo.sun@mediatek.com> stable inclusion from stable-v5.10.142 commit 95791d51f7af57a4e08119157758db332e650f8e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit c1e5c2f0cb8a22ec2e14af92afc7006491bebabb upstream. Fix incorrect pin assignment values when connecting to a monitor with Type-C receptacle instead of a plug. According to specification, an UFP_D receptacle's pin assignment should came from the UFP_D pin assignments field (bit 23:16), while an UFP_D plug's assignments are described in the DFP_D pin assignments (bit 15:8) during Mode Discovery. For example the LG 27 UL850-W is a monitor with Type-C receptacle. The monitor responds to MODE DISCOVERY command with following DisplayPort Capability flag: dp->alt->vdo=0x140045 The existing logic only take cares of UPF_D plug case, and would take the bit 15:8 for this 0x140045 case. This results in an non-existing pin assignment 0x0 in dp_altmode_configure. To fix this problem a new set of macros are introduced to take plug/receptacle differences into consideration. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Co-developed-by: Pablo Sun <pablo.sun@mediatek.com> Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Guillaume Ranquet <granquet@baylibre.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/typec/altmodes/displayport.c | 4 ++-- include/linux/usb/typec_dp.h | 5 +++++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index e62e5e3da01e..5e293ccf0e90 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -88,8 +88,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con) case DP_STATUS_CON_UFP_D: case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */ conf |= DP_CONF_UFP_U_AS_UFP_D; - pin_assign = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo) & - DP_CAP_UFP_D_PIN_ASSIGN(dp->port->vdo); + pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) & + DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo); break; default: break; diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h index fc4c7edb2e8a..296909ea04f2 100644 --- a/include/linux/usb/typec_dp.h +++ b/include/linux/usb/typec_dp.h @@ -73,6 +73,11 @@ enum { #define DP_CAP_USB BIT(7) #define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8) #define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(23, 16)) >> 16) +/* Get pin assignment taking plug & receptacle into consideration */ +#define DP_CAP_PIN_ASSIGN_UFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ + DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_)) +#define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ + DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_)) /* DisplayPort Status Update VDO bits */ #define DP_STATUS_CONNECTION(_status_) ((_status_) & 3) -- 2.25.1
From: Heiner Kallweit <hkallweit1@gmail.com> stable inclusion from stable-v5.10.142 commit d608c131df9954e420f5ad373e734a2fedbf2479 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit f9b995b49a07bd0d43b0e490f59be84415c745ae upstream. Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before phy_init") the driver complains. In my case (Amlogic SoC) the warning is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init So change the order of the two calls. The same change has to be done to the order of phy_exit() and phy_power_off(). Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") Cc: stable@vger.kernel.org Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc2/platform.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 49d333f02af4..8851db646ef5 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -154,9 +154,9 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) } else if (hsotg->plat && hsotg->plat->phy_init) { ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); } else { - ret = phy_power_on(hsotg->phy); + ret = phy_init(hsotg->phy); if (ret == 0) - ret = phy_init(hsotg->phy); + ret = phy_power_on(hsotg->phy); } return ret; @@ -188,9 +188,9 @@ static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) } else if (hsotg->plat && hsotg->plat->phy_exit) { ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); } else { - ret = phy_exit(hsotg->phy); + ret = phy_power_off(hsotg->phy); if (ret == 0) - ret = phy_power_off(hsotg->phy); + ret = phy_exit(hsotg->phy); } if (ret) return ret; -- 2.25.1
From: Thierry GUIBERT <thierry.guibert@croix-rouge.fr> stable inclusion from stable-v5.10.142 commit 5f0d11796aa5347a82e6187f293493ad0cc18705 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit a10bc71729b236fe36de0d8e4d35c959fd8dec3a upstream. Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver enabling the AT serial port. The Vendor Id is 0x0C26 The Product ID is 0x0020 Output of lsusb : Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0c26 Prolific Technology Inc. idProduct 0x0020 bcdDevice 0.00 iManufacturer 1 ICOM Inc. iProduct 2 ICOM Radio iSerial 3 *obfuscated* bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0030 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 7950d5b3af42..070b838c7da9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1830,6 +1830,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */ .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */ }, + { USB_DEVICE(0x0c26, 0x0020), /* Icom ICF3400 Serie */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, { USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, -- 2.25.1
From: Witold Lipieta <witold.lipieta@thaumatec.com> stable inclusion from stable-v5.10.142 commit b9097c5e107dfa6f9d16dace9be8ccadce70ddbe category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 2aa48857ad52236a9564c71183d6cc8893becd41 upstream. This is USB mass storage primary boot loader for code download on NXP PN7462AU. Without the quirk it is impossible to write whole memory at once as device restarts during the write due to bogus residue values reported. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Witold Lipieta <witold.lipieta@thaumatec.com> Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.c... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1a05e3dcfec8..4993227ab293 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2294,6 +2294,13 @@ UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), +/* Reported by Witold Lipieta <witold.lipieta@thaumatec.com> */ +UNUSUAL_DEV( 0x1fc9, 0x0117, 0x0100, 0x0100, + "NXP Semiconductors", + "PN7462AU", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Supplied with some Castlewood ORB removable drives */ UNUSUAL_DEV( 0x2027, 0xa001, 0x0000, 0x9999, "Double-H Technology", -- 2.25.1
From: Gerald Schaefer <gerald.schaefer@linux.ibm.com> stable inclusion from stable-v5.10.142 commit 0361d50e86c0a87feefa3d723deea9e4d5317341 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 7c8d42fdf1a84b1a0dd60d6528309c8ec127e87c upstream. The alignment check in prepare_hugepage_range() is wrong for 2 GB hugepages, it only checks for 1 MB hugepage alignment. This can result in kernel crash in __unmap_hugepage_range() at the BUG_ON(start & ~huge_page_mask(h)) alignment check, for mappings created with MAP_FIXED at unaligned address. Fix this by correctly handling multiple hugepage sizes, similar to the generic version of prepare_hugepage_range(). Fixes: d08de8e2d867 ("s390/mm: add support for 2GB hugepages") Cc: <stable@vger.kernel.org> # 4.8+ Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/s390/include/asm/hugetlb.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h index 60f9241e5e4a..d3642fb634bd 100644 --- a/arch/s390/include/asm/hugetlb.h +++ b/arch/s390/include/asm/hugetlb.h @@ -28,9 +28,11 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, static inline int prepare_hugepage_range(struct file *file, unsigned long addr, unsigned long len) { - if (len & ~HPAGE_MASK) + struct hstate *h = hstate_file(file); + + if (len & ~huge_page_mask(h)) return -EINVAL; - if (addr & ~HPAGE_MASK) + if (addr & ~huge_page_mask(h)) return -EINVAL; return 0; } -- 2.25.1
From: Josh Poimboeuf <jpoimboe@kernel.org> stable inclusion from stable-v5.10.142 commit b0d4993c4baa6207d5716500650a7b7c13808ba9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit c9305b6c1f52060377c72aebe3a701389e9f3172 upstream. Add proper alignment for .nospec_call_table and .nospec_return_table in vmlinux. [hca@linux.ibm.com]: The problem with the missing alignment of the nospec tables exist since a long time, however only since commit e6ed91fd0768 ("s390/alternatives: remove padding generation code") and with CONFIG_RELOCATABLE=n the kernel may also crash at boot time. The above named commit reduced the size of struct alt_instr by one byte, so its new size is 11 bytes. Therefore depending on the number of cpu alternatives the size of the __alt_instructions array maybe odd, which again also causes that the addresses of the nospec tables will be odd. If the address of __nospec_call_start is odd and the kernel is compiled With CONFIG_RELOCATABLE=n the compiler may generate code that loads the address of __nospec_call_start with a 'larl' instruction. This will generate incorrect code since the 'larl' instruction only works with even addresses. In result the members of the nospec tables will be accessed with an off-by-one offset, which subsequently may lead to addressing exceptions within __nospec_revert(). Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches") Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/8719bf1ce4a72ebdeb575200290094e9ce047bcc.166155733... Cc: <stable@vger.kernel.org> # 4.16 Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/s390/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 177ccfbda40a..9505bdb0aa54 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -122,6 +122,7 @@ SECTIONS /* * Table with the patch locations to undo expolines */ + . = ALIGN(4); .nospec_call_table : { __nospec_call_start = . ; *(.s390_indirect*) -- 2.25.1
From: Krishna Kurapati <quic_kriskura@quicinc.com> stable inclusion from stable-v5.10.142 commit 6202637fdef0745a20b68675c4b08e08aa0a6297 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 9d4dc16ec71bd6368548e9743223e449b4377fc7 upstream. During cdrom emulation, the response to read_toc command must contain the cdrom address as the number of sectors (2048 byte sized blocks) represented either as an absolute value (when MSF bit is '0') or in terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of cdrom, the fsg_lun_open call sets the sector size to 2048 bytes. When MAC OS sends a read_toc request with MSF set to '1', the store_cdrom_address assumes that the address being provided is the LUN size represented in 512 byte sized blocks instead of 2048. It tries to modify the address further to convert it to 2048 byte sized blocks and store it in MSF format. This results in data transfer failures as the cdrom address being provided in the read_toc response is incorrect. Fixes: 3f565a363cee ("usb: gadget: storage: adapt logic block size to bound block devices") Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/1661570110-19127-1-git-send-email-quic_kriskura@qu... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/gadget/function/storage_common.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c index f7e6c42558eb..021984921f91 100644 --- a/drivers/usb/gadget/function/storage_common.c +++ b/drivers/usb/gadget/function/storage_common.c @@ -294,8 +294,10 @@ EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub); void store_cdrom_address(u8 *dest, int msf, u32 addr) { if (msf) { - /* Convert to Minutes-Seconds-Frames */ - addr >>= 2; /* Convert to 2048-byte frames */ + /* + * Convert to Minutes-Seconds-Frames. + * Sector size is already set to 2048 bytes. + */ addr += 2*75; /* Lead-in occupies 2 seconds */ dest[3] = addr % 75; /* Frames */ addr /= 75; -- 2.25.1
From: "Isaac J. Manjarres" <isaacmanjarres@google.com> stable inclusion from stable-v5.10.142 commit 742e222dd556bc77940b14e48b2e9832bd9c74d2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 25e9fbf0fd38868a429feabc38abebfc6dbf6542 upstream. Both __device_attach_driver() and __driver_attach() check the return code of the bus_type.match() function to see if the device needs to be added to the deferred probe list. After adding the device to the list, the logic attempts to bind the device to the driver anyway, as if the device had matched with the driver, which is not correct. If __device_attach_driver() detects that the device in question is not ready to match with a driver on the bus, then it doesn't make sense for the device to attempt to bind with the current driver or continue attempting to match with any of the other drivers on the bus. So, update the logic in __device_attach_driver() to reflect this. If __driver_attach() detects that a driver tried to match with a device that is not ready to match yet, then the driver should not attempt to bind with the device. However, the driver can still attempt to match and bind with other devices on the bus, as drivers can be bound to multiple devices. So, update the logic in __driver_attach() to reflect this. Fixes: 656b8035b0ee ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()") Cc: stable@vger.kernel.org Cc: Saravana Kannan <saravanak@google.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Link: https://lore.kernel.org/r/20220817184026.3468620-1-isaacmanjarres@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/base/dd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 96181a3bb267..5dee895e41ed 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -837,6 +837,11 @@ static int __device_attach_driver(struct device_driver *drv, void *_data) } else if (ret == -EPROBE_DEFER) { dev_dbg(dev, "Device match requests probe deferral\n"); driver_deferred_probe_add(dev); + /* + * Device can't match with a driver right now, so don't attempt + * to match or bind with other drivers on the bus. + */ + return ret; } else if (ret < 0) { dev_dbg(dev, "Bus failed to match device: %d\n", ret); return ret; @@ -1076,6 +1081,11 @@ static int __driver_attach(struct device *dev, void *data) } else if (ret == -EPROBE_DEFER) { dev_dbg(dev, "Device match requests probe deferral\n"); driver_deferred_probe_add(dev); + /* + * Driver could not match with device, but may match with + * another device on the bus. + */ + return 0; } else if (ret < 0) { dev_dbg(dev, "Bus failed to match device: %d\n", ret); return ret; -- 2.25.1
From: Siddh Raman Pant <code@siddh.me> stable inclusion from stable-v5.10.142 commit dd649b49219a0388cc10fc40e4c2ea681566a780 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 15bc8966b6d3a5b9bfe4c9facfa02f2b69b1e5f0 upstream. When we are not connected to a channel, sending channel "switch" announcement doesn't make any sense. The BSS list is empty in that case. This causes the for loop in cfg80211_get_bss() to be bypassed, so the function returns NULL (check line 1424 of net/wireless/scan.c), causing the WARN_ON() in ieee80211_ibss_csa_beacon() to get triggered (check line 500 of net/mac80211/ibss.c), which was consequently reported on the syzkaller dashboard. Thus, check if we have an existing connection before generating the CSA beacon in ieee80211_ibss_finish_csa(). Cc: stable@vger.kernel.org Fixes: cd7760e62c2a ("mac80211: add support for CSA in IBSS mode") Link: https://syzkaller.appspot.com/bug?id=05603ef4ae8926761b678d2939a3b2ad28ab9ca... Reported-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com Signed-off-by: Siddh Raman Pant <code@siddh.me> Tested-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20220814151512.9985-1-code@siddh.me Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/mac80211/ibss.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index a7ac53a2f00d..78ae58ec397a 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -541,6 +541,10 @@ int ieee80211_ibss_finish_csa(struct ieee80211_sub_if_data *sdata) sdata_assert_lock(sdata); + /* When not connected/joined, sending CSA doesn't make sense. */ + if (ifibss->state != IEEE80211_IBSS_MLME_JOINED) + return -ENOLINK; + /* update cfg80211 bss information with the new channel */ if (!is_zero_ether_addr(ifibss->bssid)) { cbss = cfg80211_get_bss(sdata->local->hw.wiphy, -- 2.25.1
From: Siddh Raman Pant <code@siddh.me> stable inclusion from stable-v5.10.142 commit 4abc8c07a065ecf771827bde3c63fbbe4aa0c08b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 60deb9f10eec5c6a20252ed36238b55d8b614a2c upstream. ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done(). Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Siddh Raman Pant <code@siddh.me> Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/mac80211/scan.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index edd84f367880..b241ff8c015a 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -463,16 +463,19 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) scan_req = rcu_dereference_protected(local->scan_req, lockdep_is_held(&local->mtx)); - if (scan_req != local->int_scan_req) { - local->scan_info.aborted = aborted; - cfg80211_scan_done(scan_req, &local->scan_info); - } RCU_INIT_POINTER(local->scan_req, NULL); RCU_INIT_POINTER(local->scan_sdata, NULL); local->scanning = 0; local->scan_chandef.chan = NULL; + synchronize_rcu(); + + if (scan_req != local->int_scan_req) { + local->scan_info.aborted = aborted; + cfg80211_scan_done(scan_req, &local->scan_info); + } + /* Set power back to normal operating levels. */ ieee80211_hw_config(local, 0); -- 2.25.1
From: Nicolas Dichtel <nicolas.dichtel@6wind.com> stable inclusion from stable-v5.10.142 commit 685f4e56717edb02d35fa2ae65b2fa40c8ed12e4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit eb55dc09b5dd040232d5de32812cc83001a23da6 upstream. __mkroute_input() uses fib_validate_source() to trigger an icmp redirect. My understanding is that fib_validate_source() is used to know if the src address and the gateway address are on the same link. For that, fib_validate_source() returns 1 (same link) or 0 (not the same network). __mkroute_input() is the only user of these positive values, all other callers only look if the returned value is negative. Since the below patch, fib_validate_source() didn't return anymore 1 when both addresses are on the same network, because the route lookup returns RT_SCOPE_LINK instead of RT_SCOPE_HOST. But this is, in fact, right. Let's adapat the test to return 1 again when both addresses are on the same link. CC: stable@vger.kernel.org Fixes: 747c14307214 ("ip: fix dflt addr selection for connected nexthop") Reported-by: kernel test robot <yujie.liu@intel.com> Reported-by: Heng Qi <hengqi@linux.alibaba.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220829100121.3821-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/ipv4/fib_frontend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 0df4594b49c7..af8a4255cf1b 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -389,7 +389,7 @@ static int __fib_validate_source(struct sk_buff *skb, __be32 src, __be32 dst, dev_match = dev_match || (res.type == RTN_LOCAL && dev == net->loopback_dev); if (dev_match) { - ret = FIB_RES_NHC(res)->nhc_scope >= RT_SCOPE_HOST; + ret = FIB_RES_NHC(res)->nhc_scope >= RT_SCOPE_LINK; return ret; } if (no_addr) @@ -401,7 +401,7 @@ static int __fib_validate_source(struct sk_buff *skb, __be32 src, __be32 dst, ret = 0; if (fib_lookup(net, &fl4, &res, FIB_LOOKUP_IGNORE_LINKSTATE) == 0) { if (res.type == RTN_UNICAST) - ret = FIB_RES_NHC(res)->nhc_scope >= RT_SCOPE_HOST; + ret = FIB_RES_NHC(res)->nhc_scope >= RT_SCOPE_LINK; } return ret; -- 2.25.1
From: Miquel Raynal <miquel.raynal@bootlin.com> stable inclusion from stable-v5.10.142 commit ab9f890377d12076dc9a227f68e752ac8fd7aa51 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit f0da47118c7e93cdbbc6fb403dd729a5f2c90ee3 upstream. Upon reception, a packet must be categorized, either it's destination is the host, or it is another host. A packet with no destination addressing fields may be valid in two situations: - the packet has no source field: only ACKs are built like that, we consider the host as the destination. - the packet has a valid source field: it is directed to the PAN coordinator, as for know we don't have this information we consider we are not the PAN coordinator. There was likely a copy/paste error made during a previous cleanup because the if clause is now containing exactly the same condition as in the switch case, which can never be true. In the past the destination address was used in the switch and the source address was used in the if, which matches what the spec says. Cc: stable@vger.kernel.org Fixes: ae531b9475f6 ("ieee802154: use ieee802154_addr instead of *_sa variants") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/mac802154/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac802154/rx.c b/net/mac802154/rx.c index b8ce84618a55..c439125ef2b9 100644 --- a/net/mac802154/rx.c +++ b/net/mac802154/rx.c @@ -44,7 +44,7 @@ ieee802154_subif_frame(struct ieee802154_sub_if_data *sdata, switch (mac_cb(skb)->dest.mode) { case IEEE802154_ADDR_NONE: - if (mac_cb(skb)->dest.mode != IEEE802154_ADDR_NONE) + if (hdr->source.mode != IEEE802154_ADDR_NONE) /* FIXME: check if we are PAN coordinator */ skb->pkt_type = PACKET_OTHERHOST; else -- 2.25.1
From: Kacper Michajłow <kasper93@gmail.com> stable inclusion from stable-v5.10.142 commit 7565c1503074c3c06d5435da9ac87700b78b0379 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit a2d57ebec1e15f0ac256eb8397e82b07adfaaacc upstream. Magic initialization sequence was extracted from Windows driver and cleaned up manually. Fixes internal speakers output. Link: https://bugzilla.kernel.org/show_bug.cgi?id=207423 Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1851518 Signed-off-by: Kacper Michajłow <kasper93@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220827203328.30363-1-kasper93@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_realtek.c | 63 +++++++++++++++++++++++++++++++---- 1 file changed, 56 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6e679c86b6fa..78f4f684a3c7 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4628,6 +4628,48 @@ static void alc236_fixup_hp_mute_led_micmute_vref(struct hda_codec *codec, alc236_fixup_hp_micmute_led_vref(codec, fix, action); } +static inline void alc298_samsung_write_coef_pack(struct hda_codec *codec, + const unsigned short coefs[2]) +{ + alc_write_coef_idx(codec, 0x23, coefs[0]); + alc_write_coef_idx(codec, 0x25, coefs[1]); + alc_write_coef_idx(codec, 0x26, 0xb011); +} + +struct alc298_samsung_amp_desc { + unsigned char nid; + unsigned short init_seq[2][2]; +}; + +static void alc298_fixup_samsung_amp(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + int i, j; + static const unsigned short init_seq[][2] = { + { 0x19, 0x00 }, { 0x20, 0xc0 }, { 0x22, 0x44 }, { 0x23, 0x08 }, + { 0x24, 0x85 }, { 0x25, 0x41 }, { 0x35, 0x40 }, { 0x36, 0x01 }, + { 0x38, 0x81 }, { 0x3a, 0x03 }, { 0x3b, 0x81 }, { 0x40, 0x3e }, + { 0x41, 0x07 }, { 0x400, 0x1 } + }; + static const struct alc298_samsung_amp_desc amps[] = { + { 0x3a, { { 0x18, 0x1 }, { 0x26, 0x0 } } }, + { 0x39, { { 0x18, 0x2 }, { 0x26, 0x1 } } } + }; + + if (action != HDA_FIXUP_ACT_INIT) + return; + + for (i = 0; i < ARRAY_SIZE(amps); i++) { + alc_write_coef_idx(codec, 0x22, amps[i].nid); + + for (j = 0; j < ARRAY_SIZE(amps[i].init_seq); j++) + alc298_samsung_write_coef_pack(codec, amps[i].init_seq[j]); + + for (j = 0; j < ARRAY_SIZE(init_seq); j++) + alc298_samsung_write_coef_pack(codec, init_seq[j]); + } +} + #if IS_REACHABLE(CONFIG_INPUT) static void gpio2_mic_hotkey_event(struct hda_codec *codec, struct hda_jack_callback *event) @@ -6787,6 +6829,7 @@ enum { ALC236_FIXUP_HP_GPIO_LED, ALC236_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF, + ALC298_FIXUP_SAMSUNG_AMP, ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, ALC295_FIXUP_ASUS_MIC_NO_PRESENCE, @@ -8140,6 +8183,12 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc236_fixup_hp_mute_led_micmute_vref, }, + [ALC298_FIXUP_SAMSUNG_AMP] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc298_fixup_samsung_amp, + .chained = true, + .chain_id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET + }, [ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -8914,13 +8963,13 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x10ec, 0x1254, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK), SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-SZ6", ALC269_FIXUP_HEADSET_MODE), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC), - SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), - SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), - SND_PCI_QUIRK(0x144d, 0xc189, "Samsung Galaxy Flex Book (NT950QCG-X716)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), - SND_PCI_QUIRK(0x144d, 0xc18a, "Samsung Galaxy Book Ion (NP930XCJ-K01US)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), + SND_PCI_QUIRK(0x144d, 0xc169, "Samsung Notebook 9 Pen (NP930SBE-K01US)", ALC298_FIXUP_SAMSUNG_AMP), + SND_PCI_QUIRK(0x144d, 0xc176, "Samsung Notebook 9 Pro (NP930MBE-K04US)", ALC298_FIXUP_SAMSUNG_AMP), + SND_PCI_QUIRK(0x144d, 0xc189, "Samsung Galaxy Flex Book (NT950QCG-X716)", ALC298_FIXUP_SAMSUNG_AMP), + SND_PCI_QUIRK(0x144d, 0xc18a, "Samsung Galaxy Book Ion (NP930XCJ-K01US)", ALC298_FIXUP_SAMSUNG_AMP), SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8), - SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), - SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), + SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_AMP), + SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_AMP), SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC), @@ -9280,7 +9329,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC299_FIXUP_PREDATOR_SPK, .name = "predator-spk"}, {.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"}, {.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"}, - {.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"}, + {.id = ALC298_FIXUP_SAMSUNG_AMP, .name = "alc298-samsung-amp"}, {.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256-samsung-headphone"}, {.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"}, {.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"}, -- 2.25.1
From: Takashi Iwai <tiwai@suse.de> stable inclusion from stable-v5.10.142 commit f19a209f6156f1477a9980332c3b08896d62413f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 22dec134dbfa825b963f8a1807ad19b943e46a56 upstream. ALSA OSS sequencer refers to a global variable max_midi_devs at creating a new port, storing it to its own field. Meanwhile this variable may be changed by other sequencer events at snd_seq_oss_midi_check_exit_port() in parallel, which may cause a data race. OTOH, this data race itself is almost harmless, as the access to the MIDI device is done via get_mdev() and it's protected with a refcount, hence its presence is guaranteed. Though, it's sill better to address the data-race from the code sanity POV, and this patch adds the proper spinlock for the protection. Reported-by: Abhishek Shah <abhishek.shah@columbia.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAEHB2493pZRXs863w58QWnUTtv3HHfg85aYhLn5HJHCwxqtHQ... Link: https://lore.kernel.org/r/20220823072717.1706-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/core/seq/oss/seq_oss_midi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/core/seq/oss/seq_oss_midi.c b/sound/core/seq/oss/seq_oss_midi.c index 2ddfe2226651..f73ee0798aea 100644 --- a/sound/core/seq/oss/seq_oss_midi.c +++ b/sound/core/seq/oss/seq_oss_midi.c @@ -267,7 +267,9 @@ snd_seq_oss_midi_clear_all(void) void snd_seq_oss_midi_setup(struct seq_oss_devinfo *dp) { + spin_lock_irq(®ister_lock); dp->max_mididev = max_midi_devs; + spin_unlock_irq(®ister_lock); } /* -- 2.25.1
From: Takashi Iwai <tiwai@suse.de> stable inclusion from stable-v5.10.142 commit 1079d095725a66c3c45274cb62ebf1f29759c780 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 3e7e04b747adea36f349715d9f0998eeebf15d72 upstream. It's been reported that there is a possible data-race accessing to the global card_requested[] array at ALSA sequencer core, which is used for determining whether to call request_module() for the card or not. This data race itself is almost harmless, as it might end up with one extra request_module() call for the already loaded module at most. But it's still better to fix. This patch addresses the possible data race of card_requested[] and client_requested[] arrays by replacing them with bitmask. It's an atomic operation and can work without locks. Reported-by: Abhishek Shah <abhishek.shah@columbia.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAEHB24_ay6YzARpA1zgCsE7=H9CSJJzux618E=Ka4h0YdKn=q... Link: https://lore.kernel.org/r/20220823072717.1706-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/core/seq/seq_clientmgr.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c index cc93157fa950..0363670a56e7 100644 --- a/sound/core/seq/seq_clientmgr.c +++ b/sound/core/seq/seq_clientmgr.c @@ -121,13 +121,13 @@ struct snd_seq_client *snd_seq_client_use_ptr(int clientid) spin_unlock_irqrestore(&clients_lock, flags); #ifdef CONFIG_MODULES if (!in_interrupt()) { - static char client_requested[SNDRV_SEQ_GLOBAL_CLIENTS]; - static char card_requested[SNDRV_CARDS]; + static DECLARE_BITMAP(client_requested, SNDRV_SEQ_GLOBAL_CLIENTS); + static DECLARE_BITMAP(card_requested, SNDRV_CARDS); + if (clientid < SNDRV_SEQ_GLOBAL_CLIENTS) { int idx; - if (!client_requested[clientid]) { - client_requested[clientid] = 1; + if (!test_and_set_bit(clientid, client_requested)) { for (idx = 0; idx < 15; idx++) { if (seq_client_load[idx] < 0) break; @@ -142,10 +142,8 @@ struct snd_seq_client *snd_seq_client_use_ptr(int clientid) int card = (clientid - SNDRV_SEQ_GLOBAL_CLIENTS) / SNDRV_SEQ_CLIENTS_PER_CARD; if (card < snd_ecards_limit) { - if (! card_requested[card]) { - card_requested[card] = 1; + if (!test_and_set_bit(card, card_requested)) snd_request_card(card); - } snd_seq_device_load_drivers(); } } -- 2.25.1
From: Diego Santa Cruz <Diego.SantaCruz@spinetix.com> stable inclusion from stable-v5.10.142 commit 3c63a22d02433fcafa4cf25a927129c58d319e67 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 919bef7a106ade2bda73681bbc2f3678198f44fc upstream. The quirk added in upstream commit 90c3e2198777 ("drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.") is also required on the ECS Liva Q2. Note: Would be nicer to figure out the extra delay required for the retimer without quirks, however don't know how to check for that. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1326 Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220616124137.3184371-1-jani.... (cherry picked from commit 08e9505fa8f9aa00072a47b6f234d89b6b27a89c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/i915/display/intel_quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/display/intel_quirks.c b/drivers/gpu/drm/i915/display/intel_quirks.c index 46beb155d835..8eb1842f14ce 100644 --- a/drivers/gpu/drm/i915/display/intel_quirks.c +++ b/drivers/gpu/drm/i915/display/intel_quirks.c @@ -156,6 +156,9 @@ static struct intel_quirk intel_quirks[] = { /* ASRock ITX*/ { 0x3185, 0x1849, 0x2212, quirk_increase_ddi_disabled_time }, { 0x3184, 0x1849, 0x2212, quirk_increase_ddi_disabled_time }, + /* ECS Liva Q2 */ + { 0x3185, 0x1019, 0xa94d, quirk_increase_ddi_disabled_time }, + { 0x3184, 0x1019, 0xa94d, quirk_increase_ddi_disabled_time }, }; void intel_init_quirks(struct drm_i915_private *i915) -- 2.25.1
From: Anand Jain <anand.jain@oracle.com> stable inclusion from stable-v5.10.142 commit 7f73a9dea00954976999acac5fe9d4932d6e1cd0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 770c79fb65506fc7c16459855c3839429f46cb32 upstream. Identifying and removing the stale device from the fs_uuids list is done by btrfs_free_stale_devices(). btrfs_free_stale_devices() in turn depends on device_path_matched() to check if the device appears in more than one btrfs_device structure. The matching of the device happens by its path, the device path. However, when device mapper is in use, the dm device paths are nothing but a link to the actual block device, which leads to the device_path_matched() failing to match. Fix this by matching the dev_t as provided by lookup_bdev() instead of plain string compare of the device paths. Reported-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/btrfs/volumes.c | 44 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 37 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 2fdf178aa76f..d4d89e0738ff 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -540,15 +540,47 @@ btrfs_get_bdev_and_sb(const char *device_path, fmode_t flags, void *holder, return ret; } -static bool device_path_matched(const char *path, struct btrfs_device *device) +/* + * Check if the device in the path matches the device in the given struct device. + * + * Returns: + * true If it is the same device. + * false If it is not the same device or on error. + */ +static bool device_matched(const struct btrfs_device *device, const char *path) { - int found; + char *device_name; + struct block_device *bdev_old; + struct block_device *bdev_new; + + /* + * If we are looking for a device with the matching dev_t, then skip + * device without a name (a missing device). + */ + if (!device->name) + return false; + + device_name = kzalloc(BTRFS_PATH_NAME_MAX, GFP_KERNEL); + if (!device_name) + return false; rcu_read_lock(); - found = strcmp(rcu_str_deref(device->name), path); + scnprintf(device_name, BTRFS_PATH_NAME_MAX, "%s", rcu_str_deref(device->name)); rcu_read_unlock(); - return found == 0; + bdev_old = lookup_bdev(device_name); + kfree(device_name); + if (IS_ERR(bdev_old)) + return false; + + bdev_new = lookup_bdev(path); + if (IS_ERR(bdev_new)) + return false; + + if (bdev_old == bdev_new) + return true; + + return false; } /* @@ -581,9 +613,7 @@ static int btrfs_free_stale_devices(const char *path, &fs_devices->devices, dev_list) { if (skip_device && skip_device == device) continue; - if (path && !device->name) - continue; - if (path && !device_path_matched(path, device)) + if (path && !device_matched(device, path)) continue; if (fs_devices->opened) { /* for an already deleted device return 0 */ -- 2.25.1
From: Adrian Hunter <adrian.hunter@intel.com> stable inclusion from stable-v5.10.142 commit cb27189360222112bb3b03c5dec1bda47f38f307 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 15c56208c79c340686869c31595c209d1431c5e8 upstream. When introduced, upon success, the 1.8V fixup workaround in mmc_sd_init_card() would branch to practically the end of the function, to a label named "done". Unfortunately, perhaps due to the label name, over time new code has been added that really should have come after "done" not before it. Let's fix the problem by moving the label to the correct place and rename it "cont". Fixes: 045d705dc1fb ("mmc: core: Enable the MMC host software queue for the SD card") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Seunghui Lee <sh043.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220815073321.63382-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [Backport to 5.10] Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/mmc/core/sd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index bac343a8d569..0b09cdaaeb6c 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -1107,7 +1107,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, mmc_remove_card(card); goto retry; } - goto done; + goto cont; } } @@ -1143,7 +1143,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, mmc_set_bus_width(host, MMC_BUS_WIDTH_4); } } - +cont: if (host->cqe_ops && !host->cqe_enabled) { err = host->cqe_ops->cqe_enable(host, card); if (!err) { @@ -1161,7 +1161,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, err = -EINVAL; goto free_card; } -done: + host->card = card; return 0; -- 2.25.1
From: Johan Hovold <johan+linaro@kernel.org> stable inclusion from stable-v5.10.142 commit 8984ca41de168a14df8af8d09e6688e03252dcb6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit d2ac7bef95c9ead307801ccb6cb6dfbeb14247bf upstream. Generic PHYs must be powered-off before they can be tore down. Similarly, suspending legacy PHYs after having powered them off makes no sense. Fix the dwc3_core_exit() (e.g. called during suspend) and open-coded dwc3_probe() error-path sequences that got this wrong. Note that this makes dwc3_core_exit() match the dwc3_core_init() error path with respect to powering off the PHYs. Fixes: 03c1fd622f72 ("usb: dwc3: core: add phy cleanup for probe error handling") Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths") Cc: stable@vger.kernel.org # 4.8 Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ johan: adjust context to 5.15 ] Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc3/core.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 572cf34459aa..5aae7504f78a 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -728,15 +728,16 @@ static void dwc3_core_exit(struct dwc3 *dwc) { dwc3_event_buffers_cleanup(dwc); + usb_phy_set_suspend(dwc->usb2_phy, 1); + usb_phy_set_suspend(dwc->usb3_phy, 1); + phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); + usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); phy_exit(dwc->usb2_generic_phy); phy_exit(dwc->usb3_generic_phy); - usb_phy_set_suspend(dwc->usb2_phy, 1); - usb_phy_set_suspend(dwc->usb3_phy, 1); - phy_power_off(dwc->usb2_generic_phy); - phy_power_off(dwc->usb3_generic_phy); clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks); reset_control_assert(dwc->reset); } @@ -1606,16 +1607,16 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_debugfs_exit(dwc); dwc3_event_buffers_cleanup(dwc); - usb_phy_shutdown(dwc->usb2_phy); - usb_phy_shutdown(dwc->usb3_phy); - phy_exit(dwc->usb2_generic_phy); - phy_exit(dwc->usb3_generic_phy); - usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); phy_power_off(dwc->usb2_generic_phy); phy_power_off(dwc->usb3_generic_phy); + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); + dwc3_ulpi_exit(dwc); err4: -- 2.25.1
From: Johan Hovold <johan+linaro@kernel.org> stable inclusion from stable-v5.10.142 commit 451fa90150f2f7b5376919f17f88bf9c0deff2ee category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit a872ab303d5ddd4c965f9cd868677781a33ce35a upstream. The Qualcomm dwc3 runtime-PM implementation checks the xhci platform-device pointer in the wakeup-interrupt handler to determine whether the controller is in host mode and if so triggers a resume. After a role switch in OTG mode the xhci platform-device would have been freed and the next wakeup from runtime suspend would access the freed memory. Note that role switching is executed from a freezable workqueue, which guarantees that the pointer is stable during suspend. Also note that runtime PM has been broken since commit 2664deb09306 ("usb: dwc3: qcom: Honor wakeup enabled/disabled state"), which incidentally also prevents this issue from being triggered. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-5-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ johan: adjust context for 5.15 ] Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc3/dwc3-qcom.c | 14 +++++++++++++- drivers/usb/dwc3/host.c | 1 + 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 915fa4197d77..ca3a35fd8f74 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -296,6 +296,14 @@ static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom) icc_put(qcom->icc_path_apps); } +/* Only usable in contexts where the role can not change. */ +static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom) +{ + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + + return dwc->xhci; +} + static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) { if (qcom->hs_phy_irq) { @@ -411,7 +419,11 @@ static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data) if (qcom->pm_suspended) return IRQ_HANDLED; - if (dwc->xhci) + /* + * This is safe as role switching is done from a freezable workqueue + * and the wakeup interrupts are disabled as part of resume. + */ + if (dwc3_qcom_is_host(qcom)) pm_runtime_resume(&dwc->xhci->dev); return IRQ_HANDLED; diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index e195176580de..b06ab85f8187 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -130,4 +130,5 @@ int dwc3_host_init(struct dwc3 *dwc) void dwc3_host_exit(struct dwc3 *dwc) { platform_device_unregister(dwc->xhci); + dwc->xhci = NULL; } -- 2.25.1
From: Johan Hovold <johan+linaro@kernel.org> stable inclusion from stable-v5.10.142 commit 06a84bda0a0876dc0ba358e47ff51e5e658ed374 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 6000b8d900cd5f52fbcd0776d0cc396e88c8c2ea upstream. The dwc3 driver manages its PHYs itself so the USB core PHY management needs to be disabled. Use the struct xhci_plat_priv hack added by commits 46034a999c07 ("usb: host: xhci-plat: add platform data support") and f768e718911e ("usb: host: xhci-plat: add priv quirk for skip PHY initialization") to propagate the setting for now. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Fixes: 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Tested-by: Matthias Kaehlcke <mka@chromium.org> Cc: stable <stable@kernel.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220825131836.19769-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ johan: adjust context to 5.15 ] Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc3/host.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index b06ab85f8187..86bc2bec9038 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -10,8 +10,13 @@ #include <linux/acpi.h> #include <linux/platform_device.h> +#include "../host/xhci-plat.h" #include "core.h" +static const struct xhci_plat_priv dwc3_xhci_plat_priv = { + .quirks = XHCI_SKIP_PHY_INIT, +}; + static int dwc3_host_get_irq(struct dwc3 *dwc) { struct platform_device *dwc3_pdev = to_platform_device(dwc->dev); @@ -87,6 +92,11 @@ int dwc3_host_init(struct dwc3 *dwc) goto err; } + ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv, + sizeof(dwc3_xhci_plat_priv)); + if (ret) + goto err; + memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props)); if (dwc->usb3_lpm_capable) -- 2.25.1
From: Johan Hovold <johan@kernel.org> stable inclusion from stable-v5.10.142 commit 2a4c619a87ddf558082a1dd6f2b0cad3bd4623f5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 8e83622ae7ca481c76c8fd9579877f6abae64ca2 upstream. Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost. Note that updating LCR using the INIT command has no effect on these devices either. Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org> [ johan: adjust context to 5.15 ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/ch341.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index a2a38fc76ca5..3d05e22d25ae 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -97,7 +97,10 @@ struct ch341_private { u8 mcr; u8 msr; u8 lcr; + unsigned long quirks; + u8 version; + unsigned long break_end; }; @@ -271,6 +274,9 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev, * (stop bits, parity and word length). Version 0x30 and above use * CH341_REG_LCR only and CH341_REG_LCR2 is always set to zero. */ + if (priv->version < 0x30) + return 0; + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, CH341_REG_LCR2 << 8 | CH341_REG_LCR, lcr); if (r) @@ -323,7 +329,9 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size); if (r < 0) goto out; - dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]); + + priv->version = buffer[0]; + dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version); r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0); if (r < 0) -- 2.25.1
From: Johan Hovold <johan@kernel.org> stable inclusion from stable-v5.10.142 commit 2058aab4e3060ae239e3f2edd1d7aa66762c49c5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6CSFH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 41ca302a697b64a3dab4676e01d0d11bb184737d upstream. At least one older CH341 appears to have the RX timer enable bit inverted so that setting it disables the RX timer and prevents the FIFO from emptying until it is full. Only set the RX timer enable bit for devices with version newer than 0x27 (even though this probably affects all pre-0x30 devices). Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/ch341.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 3d05e22d25ae..97a250e75ab7 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -259,8 +259,12 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev, /* * CH341A buffers data until a full endpoint-size packet (32 bytes) * has been received unless bit 7 is set. + * + * At least one device with version 0x27 appears to have this bit + * inverted. */ - val |= BIT(7); + if (priv->version > 0x27) + val |= BIT(7); r = ch341_control_out(dev, CH341_REQ_WRITE_REG, CH341_REG_DIVISOR << 8 | CH341_REG_PRESCALER, -- 2.25.1
participants (1)
-
Jialin Zhang