From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> stable inclusion from stable-v6.7-rc1 commit b6f9774719e5601b32f47021b40fee446b356490 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR -------------------------------- Provide a new method, mac_get_caps() to get the MAC capabilities for the specified interface mode. This is for MACs which have special requirements, such as not supporting half-duplex in certain interface modes, and will replace the validate() method. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qsPk5-009wiX-G5@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ming Wang <wangming01@loongson.cn> --- Documentation/networking/sfp-phylink.rst | 7 +++++++ drivers/net/phy/phylink.c | 14 +++++++++++--- include/linux/phylink.h | 15 +++++++++++++++ 3 files changed, 33 insertions(+), 3 deletions(-) diff --git a/Documentation/networking/sfp-phylink.rst b/Documentation/networking/sfp-phylink.rst index 55b65f607a64..b069d34d7f5c 100644 --- a/Documentation/networking/sfp-phylink.rst +++ b/Documentation/networking/sfp-phylink.rst @@ -200,6 +200,13 @@ this documentation. when the in-band link state changes - otherwise the link will never come up. + The :c:func:`mac_get_caps` method is optional, and if provided should + return the phylink MAC capabilities that are supported for the passed + ``interface`` mode. In general, there is no need to implement this method. + Phylink will use these capabilities in combination with permissible + capabilities for ``interface`` to determine the allowable ethtool link + modes. + The :c:func:`validate` method should mask the supplied supported mask, and ``state->advertising`` with the supported ethtool link modes. These are the new ethtool link modes, so bitmask operations must be diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index b5f012619e42..00e6a5723230 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -657,6 +657,7 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl, unsigned long *supported, struct phylink_link_state *state) { + unsigned long capabilities; struct phylink_pcs *pcs; int ret; @@ -696,10 +697,17 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl, } /* Then validate the link parameters with the MAC */ - if (pl->mac_ops->validate) + if (pl->mac_ops->validate) { pl->mac_ops->validate(pl->config, supported, state); - else - phylink_generic_validate(pl->config, supported, state); + } else { + if (pl->mac_ops->mac_get_caps) + capabilities = pl->mac_ops->mac_get_caps(pl->config, + state->interface); + else + capabilities = pl->config->mac_capabilities; + + phylink_validate_mask_caps(supported, state, capabilities); + } return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; } diff --git a/include/linux/phylink.h b/include/linux/phylink.h index 2b886ea654bb..0798198a09ef 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -228,6 +228,7 @@ void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed); /** * struct phylink_mac_ops - MAC operations structure. * @validate: Validate and update the link configuration. + * @mac_get_caps: Get MAC capabilities for interface mode. * @mac_select_pcs: Select a PCS for the interface mode. * @mac_prepare: prepare for a major reconfiguration of the interface. * @mac_config: configure the MAC for the selected mode and state. @@ -241,6 +242,8 @@ struct phylink_mac_ops { void (*validate)(struct phylink_config *config, unsigned long *supported, struct phylink_link_state *state); + unsigned long (*mac_get_caps)(struct phylink_config *config, + phy_interface_t interface); struct phylink_pcs *(*mac_select_pcs)(struct phylink_config *config, phy_interface_t interface); int (*mac_prepare)(struct phylink_config *config, unsigned int mode, @@ -292,6 +295,18 @@ struct phylink_mac_ops { */ void validate(struct phylink_config *config, unsigned long *supported, struct phylink_link_state *state); +/** + * mac_get_caps: Get MAC capabilities for interface mode. + * @config: a pointer to a &struct phylink_config. + * @interface: PHY interface mode. + * + * Optional method. When not provided, config->mac_capabilities will be used. + * When implemented, this returns the MAC capabilities for the specified + * interface mode where there is some special handling required by the MAC + * driver (e.g. not supporting half-duplex in certain interface modes.) + */ +unsigned long mac_get_caps(struct phylink_config *config, + phy_interface_t interface); /** * mac_select_pcs: Select a PCS for the interface mode. * @config: a pointer to a &struct phylink_config. -- 2.33.0

From: Serge Semin <fancer.lancer@gmail.com> linux-next inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I9RPAR Reference: https://lore.kernel.org/all/cover.1714046812.git.siyanteng@loongson.cn -------------------------------- After a set of recent fixes the stmmac_phy_setup() and stmmac_reinit_queues() methods have turned to having some duplicated code. Let's get rid from the duplication by moving the MAC-capabilities initialization to the PHYLINK MAC-capabilities getter. The getter is called during each network device interface open/close cycle. So the MAC-capabilities will be initialized in generic device open procedure and in case of the Tx/Rx queues re-initialization as the original code semantics implies. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Romain Gantois <romain.gantois@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Ming Wang <wangming01@loongson.cn> --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 36 +++++++++---------- 1 file changed, 17 insertions(+), 19 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 3dd8f2c8564b..99c39d14ad5b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -936,6 +936,22 @@ static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex) priv->pause, tx_cnt); } +static unsigned long stmmac_mac_get_caps(struct phylink_config *config, + phy_interface_t interface) +{ + struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); + + /* Refresh the MAC-specific capabilities */ + stmmac_mac_update_caps(priv); + + config->mac_capabilities = priv->hw->link.caps; + + if (priv->plat->max_speed) + phylink_limit_mac_speed(config, priv->plat->max_speed); + + return config->mac_capabilities; +} + static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config, phy_interface_t interface) { @@ -1105,6 +1121,7 @@ static void stmmac_mac_link_up(struct phylink_config *config, } static const struct phylink_mac_ops stmmac_phylink_mac_ops = { + .mac_get_caps = stmmac_mac_get_caps, .mac_select_pcs = stmmac_mac_select_pcs, .mac_config = stmmac_mac_config, .mac_link_down = stmmac_mac_link_down, @@ -1204,7 +1221,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) int mode = priv->plat->phy_interface; struct fwnode_handle *fwnode; struct phylink *phylink; - int max_speed; priv->phylink_config.dev = &priv->dev->dev; priv->phylink_config.type = PHYLINK_NETDEV; @@ -1225,15 +1241,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) xpcs_get_interfaces(priv->hw->xpcs, priv->phylink_config.supported_interfaces); - /* Refresh the MAC-specific capabilities */ - stmmac_mac_update_caps(priv); - - priv->phylink_config.mac_capabilities = priv->hw->link.caps; - - max_speed = priv->plat->max_speed; - if (max_speed) - phylink_limit_mac_speed(&priv->phylink_config, max_speed); - fwnode = priv->plat->port_node; if (!fwnode) fwnode = dev_fwnode(priv->device); @@ -7180,7 +7187,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) { struct stmmac_priv *priv = netdev_priv(dev); int ret = 0, i; - int max_speed; if (netif_running(dev)) stmmac_release(dev); @@ -7194,14 +7200,6 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) priv->rss.table[i] = ethtool_rxfh_indir_default(i, rx_cnt); - stmmac_mac_update_caps(priv); - - priv->phylink_config.mac_capabilities = priv->hw->link.caps; - - max_speed = priv->plat->max_speed; - if (max_speed) - phylink_limit_mac_speed(&priv->phylink_config, max_speed); - stmmac_napi_add(dev); if (netif_running(dev)) -- 2.33.0