[PATCH OLK-6.6 0/3] CVE-2025-37784
Fixing CVE-2025-37784. Meghana Malladi (3): net: ti: icss-iep: Add pwidth configuration for perout signal net: ti: icss-iep: Add phase offset configuration for perout signal net: ti: icss-iep: Fix possible NULL pointer dereference for perout request drivers/net/ethernet/ti/icssg/icss_iep.c | 154 +++++++++++++++-------- 1 file changed, 102 insertions(+), 52 deletions(-) -- 2.25.1
反馈： 您发送到kernel@openeuler.org的补丁/补丁集，已成功转换为PR！ PR链接地址： https://gitee.com/openeuler/kernel/pulls/16897 邮件列表地址：https://mailweb.openeuler.org/archives/list/kernel@openeuler.org/message/GZ6... FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/16897 Mailing list address: https://mailweb.openeuler.org/archives/list/kernel@openeuler.org/message/GZ6...
From: Meghana Malladi <m-malladi@ti.com> stable inclusion from stable-v6.6.88 commit d64a7166fd124db099c7ca51d1594a16c6492df3 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC5BNI CVE: CVE-2025-37784 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e5b456a14215e3c0e84844c2926861b972e03632 ] icss_iep_perout_enable_hw() is a common function for generating both pps and perout signals. When enabling pps, the application needs to only pass enable/disable argument, whereas for perout it supports different flags to configure the signal. But icss_iep_perout_enable_hw() function is missing to hook the configuration params passed by the app, causing perout to behave same a pps (except being able to configure the period). As duty cycle is also one feature which can configured for perout, incorporate this in the function to get the expected signal. Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250304105753.1552159-2-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 7349c9e99793 ("net: ti: icss-iep: Fix possible NULL pointer dereference for perout request") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com> --- drivers/net/ethernet/ti/icssg/icss_iep.c | 47 ++++++++++++++++++++++-- 1 file changed, 44 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.c b/drivers/net/ethernet/ti/icssg/icss_iep.c index 3f9a030471fe..923ac58c9de5 100644 --- a/drivers/net/ethernet/ti/icssg/icss_iep.c +++ b/drivers/net/ethernet/ti/icssg/icss_iep.c @@ -476,9 +476,16 @@ static void icss_iep_update_to_next_boundary(struct icss_iep *iep, u64 start_ns) static int icss_iep_perout_enable_hw(struct icss_iep *iep, struct ptp_perout_request *req, int on) { + struct timespec64 ts; + u64 ns_width; int ret; u64 cmp; + /* Calculate width of the signal for PPS/PEROUT handling */ + ts.tv_sec = req->on.sec; + ts.tv_nsec = req->on.nsec; + ns_width = timespec64_to_ns(&ts); + if (iep->ops && iep->ops->perout_enable) { ret = iep->ops->perout_enable(iep->clockops_data, req, on, &cmp); if (ret) @@ -489,8 +496,9 @@ static int icss_iep_perout_enable_hw(struct icss_iep *iep, regmap_write(iep->map, ICSS_IEP_CMP1_REG0, lower_32_bits(cmp)); if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) regmap_write(iep->map, ICSS_IEP_CMP1_REG1, upper_32_bits(cmp)); - /* Configure SYNC, 1ms pulse width */ - regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, 1000000); + /* Configure SYNC, based on req on width */ + regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, + div_u64(ns_width, iep->def_inc)); regmap_write(iep->map, ICSS_IEP_SYNC0_PERIOD_REG, 0); regmap_write(iep->map, ICSS_IEP_SYNC_START_REG, 0); regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, 0); /* one-shot mode */ @@ -517,6 +525,8 @@ static int icss_iep_perout_enable_hw(struct icss_iep *iep, + req->period.nsec; icss_iep_update_to_next_boundary(iep, start_ns); + regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, + div_u64(ns_width, iep->def_inc)); /* Enable Sync in single shot mode */ regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, IEP_SYNC_CTRL_SYNC_N_EN(0) | IEP_SYNC_CTRL_SYNC_EN); @@ -544,7 +554,36 @@ static int icss_iep_perout_enable_hw(struct icss_iep *iep, static int icss_iep_perout_enable(struct icss_iep *iep, struct ptp_perout_request *req, int on) { - return -EOPNOTSUPP; + int ret = 0; + + /* Reject requests with unsupported flags */ + if (req->flags & ~PTP_PEROUT_DUTY_CYCLE) + return -EOPNOTSUPP; + + mutex_lock(&iep->ptp_clk_mutex); + + if (iep->pps_enabled) { + ret = -EBUSY; + goto exit; + } + + if (iep->perout_enabled == !!on) + goto exit; + + /* Set default "on" time (1ms) for the signal if not passed by the app */ + if (!(req->flags & PTP_PEROUT_DUTY_CYCLE)) { + req->on.sec = 0; + req->on.nsec = NSEC_PER_MSEC; + } + + ret = icss_iep_perout_enable_hw(iep, req, on); + if (!ret) + iep->perout_enabled = !!on; + +exit: + mutex_unlock(&iep->ptp_clk_mutex); + + return ret; } static int icss_iep_pps_enable(struct icss_iep *iep, int on) @@ -572,6 +611,8 @@ static int icss_iep_pps_enable(struct icss_iep *iep, int on) rq.perout.period.nsec = 0; rq.perout.start.sec = ts.tv_sec + 2; rq.perout.start.nsec = 0; + rq.perout.on.sec = 0; + rq.perout.on.nsec = NSEC_PER_MSEC; ret = icss_iep_perout_enable_hw(iep, &rq.perout, on); } else { ret = icss_iep_perout_enable_hw(iep, &rq.perout, on); -- 2.25.1
From: Meghana Malladi <m-malladi@ti.com> stable inclusion from stable-v6.6.88 commit 8b9808b1f64e201eb2416d1794ad5157bc2db660 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC5BNI CVE: CVE-2025-37784 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 220cb1be647a7ca4e60241405c66f8f612c9b046 ] icss_iep_perout_enable_hw() is a common function for generating both pps and perout signals. When enabling pps, the application needs to only pass enable/disable argument, whereas for perout it supports different flags to configure the signal. In case the app passes a valid phase offset value, the signal should start toggling after that phase offset, else start immediately or as soon as possible. ICSS_IEP_SYNC_START_REG register take number of clock cycles to wait before starting the signal after activation time. Set appropriate value to this register to support phase offset. Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250304105753.1552159-3-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 7349c9e99793 ("net: ti: icss-iep: Fix possible NULL pointer dereference for perout request") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com> --- drivers/net/ethernet/ti/icssg/icss_iep.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.c b/drivers/net/ethernet/ti/icssg/icss_iep.c index 923ac58c9de5..6006276ecce6 100644 --- a/drivers/net/ethernet/ti/icssg/icss_iep.c +++ b/drivers/net/ethernet/ti/icssg/icss_iep.c @@ -477,6 +477,7 @@ static int icss_iep_perout_enable_hw(struct icss_iep *iep, struct ptp_perout_request *req, int on) { struct timespec64 ts; + u64 ns_start; u64 ns_width; int ret; u64 cmp; @@ -486,6 +487,14 @@ static int icss_iep_perout_enable_hw(struct icss_iep *iep, ts.tv_nsec = req->on.nsec; ns_width = timespec64_to_ns(&ts); + if (req->flags & PTP_PEROUT_PHASE) { + ts.tv_sec = req->phase.sec; + ts.tv_nsec = req->phase.nsec; + ns_start = timespec64_to_ns(&ts); + } else { + ns_start = 0; + } + if (iep->ops && iep->ops->perout_enable) { ret = iep->ops->perout_enable(iep->clockops_data, req, on, &cmp); if (ret) @@ -500,7 +509,8 @@ static int icss_iep_perout_enable_hw(struct icss_iep *iep, regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, div_u64(ns_width, iep->def_inc)); regmap_write(iep->map, ICSS_IEP_SYNC0_PERIOD_REG, 0); - regmap_write(iep->map, ICSS_IEP_SYNC_START_REG, 0); + regmap_write(iep->map, ICSS_IEP_SYNC_START_REG, + div_u64(ns_start, iep->def_inc)); regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, 0); /* one-shot mode */ /* Enable CMP 1 */ regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, @@ -527,6 +537,8 @@ static int icss_iep_perout_enable_hw(struct icss_iep *iep, regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, div_u64(ns_width, iep->def_inc)); + regmap_write(iep->map, ICSS_IEP_SYNC_START_REG, + div_u64(ns_start, iep->def_inc)); /* Enable Sync in single shot mode */ regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, IEP_SYNC_CTRL_SYNC_N_EN(0) | IEP_SYNC_CTRL_SYNC_EN); @@ -557,7 +569,8 @@ static int icss_iep_perout_enable(struct icss_iep *iep, int ret = 0; /* Reject requests with unsupported flags */ - if (req->flags & ~PTP_PEROUT_DUTY_CYCLE) + if (req->flags & ~(PTP_PEROUT_DUTY_CYCLE | + PTP_PEROUT_PHASE)) return -EOPNOTSUPP; mutex_lock(&iep->ptp_clk_mutex); @@ -607,6 +620,7 @@ static int icss_iep_pps_enable(struct icss_iep *iep, int on) if (on) { ns = icss_iep_gettime(iep, NULL); ts = ns_to_timespec64(ns); + rq.perout.flags = 0; rq.perout.period.sec = 1; rq.perout.period.nsec = 0; rq.perout.start.sec = ts.tv_sec + 2; -- 2.25.1
From: Meghana Malladi <m-malladi@ti.com> stable inclusion from stable-v6.6.88 commit 7891619d21f07a88e0275d6d43db74035aa74f69 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC5BNI CVE: CVE-2025-37784 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 7349c9e9979333abfce42da5f9025598083b59c9 ] The ICSS IEP driver tracks perout and pps enable state with flags. Currently when disabling pps and perout signals during icss_iep_exit(), results in NULL pointer dereference for perout. To fix the null pointer dereference issue, the icss_iep_perout_enable_hw function can be modified to directly clear the IEP CMP registers when disabling PPS or PEROUT, without referencing the ptp_perout_request structure, as its contents are irrelevant in this case. Fixes: 9b115361248d ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mou... Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com> --- drivers/net/ethernet/ti/icssg/icss_iep.c | 121 +++++++++++------------ 1 file changed, 58 insertions(+), 63 deletions(-) diff --git a/drivers/net/ethernet/ti/icssg/icss_iep.c b/drivers/net/ethernet/ti/icssg/icss_iep.c index 6006276ecce6..f3315c651515 100644 --- a/drivers/net/ethernet/ti/icssg/icss_iep.c +++ b/drivers/net/ethernet/ti/icssg/icss_iep.c @@ -482,6 +482,22 @@ static int icss_iep_perout_enable_hw(struct icss_iep *iep, int ret; u64 cmp; + if (!on) { + /* Disable CMP 1 */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_CMP_EN(1), 0); + + /* clear CMP regs */ + regmap_write(iep->map, ICSS_IEP_CMP1_REG0, 0); + if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) + regmap_write(iep->map, ICSS_IEP_CMP1_REG1, 0); + + /* Disable sync */ + regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, 0); + + return 0; + } + /* Calculate width of the signal for PPS/PEROUT handling */ ts.tv_sec = req->on.sec; ts.tv_nsec = req->on.nsec; @@ -500,64 +516,39 @@ static int icss_iep_perout_enable_hw(struct icss_iep *iep, if (ret) return ret; - if (on) { - /* Configure CMP */ - regmap_write(iep->map, ICSS_IEP_CMP1_REG0, lower_32_bits(cmp)); - if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) - regmap_write(iep->map, ICSS_IEP_CMP1_REG1, upper_32_bits(cmp)); - /* Configure SYNC, based on req on width */ - regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, - div_u64(ns_width, iep->def_inc)); - regmap_write(iep->map, ICSS_IEP_SYNC0_PERIOD_REG, 0); - regmap_write(iep->map, ICSS_IEP_SYNC_START_REG, - div_u64(ns_start, iep->def_inc)); - regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, 0); /* one-shot mode */ - /* Enable CMP 1 */ - regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, - IEP_CMP_CFG_CMP_EN(1), IEP_CMP_CFG_CMP_EN(1)); - } else { - /* Disable CMP 1 */ - regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, - IEP_CMP_CFG_CMP_EN(1), 0); - - /* clear regs */ - regmap_write(iep->map, ICSS_IEP_CMP1_REG0, 0); - if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) - regmap_write(iep->map, ICSS_IEP_CMP1_REG1, 0); - } + /* Configure CMP */ + regmap_write(iep->map, ICSS_IEP_CMP1_REG0, lower_32_bits(cmp)); + if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) + regmap_write(iep->map, ICSS_IEP_CMP1_REG1, upper_32_bits(cmp)); + /* Configure SYNC, based on req on width */ + regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, + div_u64(ns_width, iep->def_inc)); + regmap_write(iep->map, ICSS_IEP_SYNC0_PERIOD_REG, 0); + regmap_write(iep->map, ICSS_IEP_SYNC_START_REG, + div_u64(ns_start, iep->def_inc)); + regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, 0); /* one-shot mode */ + /* Enable CMP 1 */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_CMP_EN(1), IEP_CMP_CFG_CMP_EN(1)); } else { - if (on) { - u64 start_ns; - - iep->period = ((u64)req->period.sec * NSEC_PER_SEC) + - req->period.nsec; - start_ns = ((u64)req->period.sec * NSEC_PER_SEC) - + req->period.nsec; - icss_iep_update_to_next_boundary(iep, start_ns); - - regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, - div_u64(ns_width, iep->def_inc)); - regmap_write(iep->map, ICSS_IEP_SYNC_START_REG, - div_u64(ns_start, iep->def_inc)); - /* Enable Sync in single shot mode */ - regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, - IEP_SYNC_CTRL_SYNC_N_EN(0) | IEP_SYNC_CTRL_SYNC_EN); - /* Enable CMP 1 */ - regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, - IEP_CMP_CFG_CMP_EN(1), IEP_CMP_CFG_CMP_EN(1)); - } else { - /* Disable CMP 1 */ - regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, - IEP_CMP_CFG_CMP_EN(1), 0); - - /* clear CMP regs */ - regmap_write(iep->map, ICSS_IEP_CMP1_REG0, 0); - if (iep->plat_data->flags & ICSS_IEP_64BIT_COUNTER_SUPPORT) - regmap_write(iep->map, ICSS_IEP_CMP1_REG1, 0); - - /* Disable sync */ - regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, 0); - } + u64 start_ns; + + iep->period = ((u64)req->period.sec * NSEC_PER_SEC) + + req->period.nsec; + start_ns = ((u64)req->period.sec * NSEC_PER_SEC) + + req->period.nsec; + icss_iep_update_to_next_boundary(iep, start_ns); + + regmap_write(iep->map, ICSS_IEP_SYNC_PWIDTH_REG, + div_u64(ns_width, iep->def_inc)); + regmap_write(iep->map, ICSS_IEP_SYNC_START_REG, + div_u64(ns_start, iep->def_inc)); + /* Enable Sync in single shot mode */ + regmap_write(iep->map, ICSS_IEP_SYNC_CTRL_REG, + IEP_SYNC_CTRL_SYNC_N_EN(0) | IEP_SYNC_CTRL_SYNC_EN); + /* Enable CMP 1 */ + regmap_update_bits(iep->map, ICSS_IEP_CMP_CFG_REG, + IEP_CMP_CFG_CMP_EN(1), IEP_CMP_CFG_CMP_EN(1)); } return 0; @@ -568,11 +559,21 @@ static int icss_iep_perout_enable(struct icss_iep *iep, { int ret = 0; + if (!on) + goto disable; + /* Reject requests with unsupported flags */ if (req->flags & ~(PTP_PEROUT_DUTY_CYCLE | PTP_PEROUT_PHASE)) return -EOPNOTSUPP; + /* Set default "on" time (1ms) for the signal if not passed by the app */ + if (!(req->flags & PTP_PEROUT_DUTY_CYCLE)) { + req->on.sec = 0; + req->on.nsec = NSEC_PER_MSEC; + } + +disable: mutex_lock(&iep->ptp_clk_mutex); if (iep->pps_enabled) { @@ -583,12 +584,6 @@ static int icss_iep_perout_enable(struct icss_iep *iep, if (iep->perout_enabled == !!on) goto exit; - /* Set default "on" time (1ms) for the signal if not passed by the app */ - if (!(req->flags & PTP_PEROUT_DUTY_CYCLE)) { - req->on.sec = 0; - req->on.nsec = NSEC_PER_MSEC; - } - ret = icss_iep_perout_enable_hw(iep, req, on); if (!ret) iep->perout_enabled = !!on; -- 2.25.1
participants (2)
-
GONG Ruiqi -
patchwork bot