[PATCH openEuler-23.09 00/13] LoongArch: fix some pci problems
Hongchen Zhang (13): LoongArch: fix ls2k500 bmc not work when installing iso LS7A2000 : Add quirk for OHCI device rev 0x02 PCI: Check if entry->offset already exist for mem resource PCI: Check if the pci controller can use both CFG0 and CFG1 mode to access configuration space PCI: PM: Fix pcie mrrs restoring pci: fix kabi error caused by pm_suspend_target_state LoongArch: Fixed some pcie card not scanning properly pci/quirks: ls7a2000: fix pm transition of devices under pcie port LS7A2000: PCIE: Fixup GPU card error pci: fix X server auto probe fail when both ast and etnaviv drm present LoongArch: pci root bridige set acpi companion only when not acpi_disabled. LoongArch: Fix secondary bridge routing errors pci: irq: Add early_param pci_irq_limit to limit pci irq numbers arch/loongarch/pci/acpi.c | 23 ++-- drivers/gpu/drm/loongson/loongson_module.c | 15 +++ drivers/irqchip/irq-loongson-pch-pic.c | 6 +- drivers/pci/controller/pci-loongson.c | 147 ++++++++++++++++++++- drivers/pci/msi/msi.c | 25 ++++ drivers/pci/pci.c | 20 ++- 6 files changed, 217 insertions(+), 19 deletions(-) -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I76XQZ -------------------------------- Signed-off-by: Chong Qiao <qiaochong@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/gpu/drm/loongson/loongson_module.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/loongson/loongson_module.c b/drivers/gpu/drm/loongson/loongson_module.c index d2a51bd395f6..37b7d97c4e70 100644 --- a/drivers/gpu/drm/loongson/loongson_module.c +++ b/drivers/gpu/drm/loongson/loongson_module.c @@ -19,6 +19,21 @@ module_param_named(vblank, loongson_vblank, int, 0400); static int __init loongson_module_init(void) { + struct pci_dev *pdev = NULL; + + while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, pdev))) { + /* + * Multiple video card workaround + * + * This integrated video card will always be selected as + * default boot device by vgaarb subsystem. + */ + if (pdev->vendor != PCI_VENDOR_ID_LOONGSON || pdev->device == 0x1a05) { + pr_info("Discrete graphic card detected, abort\n"); + return 0; + } + } + if (!loongson_modeset || video_firmware_drivers_only()) return -ENODEV; -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I82GAS -------------------------------- Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/pci/controller/pci-loongson.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index fe0f732f6e43..3c43b348d13d 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -32,6 +32,7 @@ #define DEV_LS7A_CONF 0x7a10 #define DEV_LS7A_GNET 0x7a13 #define DEV_LS7A_EHCI 0x7a14 +#define DEV_LS7A_OHCI 0x7a24 #define DEV_LS7A_DC2 0x7a36 #define DEV_LS7A_HDMI 0x7a37 @@ -127,6 +128,13 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_HDMI, loongson_pci_pin_quirk); +static void loongson_ohci_quirk(struct pci_dev *dev) +{ + if (dev->revision == 0x2) + dev->resource[0].start += 0x1000; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_OHCI, loongson_ohci_quirk); + static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) { struct pci_config_window *cfg; -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6BWFP -------------------------------- Fix patch "LoongArch: Add PCI controller support" Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- arch/loongarch/pci/acpi.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/loongarch/pci/acpi.c b/arch/loongarch/pci/acpi.c index 4d36179fdef0..a0d282938cf1 100644 --- a/arch/loongarch/pci/acpi.c +++ b/arch/loongarch/pci/acpi.c @@ -213,9 +213,11 @@ static int acpi_prepare_root_resources(struct acpi_pci_root_info *ci) if (status > 0) { resource_list_for_each_entry_safe(entry, tmp, &ci->resources) { if (entry->res->flags & IORESOURCE_MEM) { - entry->offset = ci->root->mcfg_addr & GENMASK_ULL(63, 40); - entry->res->start |= entry->offset; - entry->res->end |= entry->offset; + if (!entry->offset) { + entry->offset = ci->root->mcfg_addr & GENMASK_ULL(63, 40); + entry->res->start |= entry->offset; + entry->res->end |= entry->offset; + } } } return status; -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6BWFP -------------------------------- Fix patch "PCI: loongson: Use generic 8/16/32-bit config ops on LS2K/LS7A" Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/pci/controller/pci-loongson.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 3c43b348d13d..d8aac17acdb6 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -280,6 +280,7 @@ static int loongson_pci_probe(struct platform_device *pdev) struct device_node *node = dev->of_node; struct pci_host_bridge *bridge; struct resource *regs; + unsigned int num = 0; if (!node) return -ENODEV; @@ -304,7 +305,9 @@ static int loongson_pci_probe(struct platform_device *pdev) } if (priv->data->flags & FLAG_CFG1) { - regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (priv->cfg0_base) + num = 1; + regs = platform_get_resource(pdev, IORESOURCE_MEM, num); if (!regs) dev_info(dev, "missing mem resource for cfg1\n"); else { -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6BWFP -------------------------------- Don't limit mmrs during resume, so that saved value can be restored. Fix patch "PCI: loongson: Improve the MRRS quirk for LS7A" Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/pci/pci.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5ede93222bc1..f187181cccb6 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -32,6 +32,7 @@ #include <asm/dma.h> #include <linux/aer.h> #include <linux/bitfield.h> +#include <linux/suspend.h> #include "pci.h" DEFINE_MUTEX(pci_slot_mutex); @@ -165,6 +166,11 @@ static bool pci_bridge_d3_disable; /* Force bridge_d3 for all PCIe ports */ static bool pci_bridge_d3_force; +#ifndef CONFIG_PM_SLEEP +suspend_state_t pm_suspend_target_state; +#define pm_suspend_target_state (PM_SUSPEND_ON) +#endif + static int __init pcie_port_pm_setup(char *str) { if (!strcmp(str, "off")) @@ -6041,7 +6047,8 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) v = (ffs(rq) - 8) << 12; - if (bridge->no_inc_mrrs) { + if (pm_suspend_target_state == PM_SUSPEND_ON && + bridge->no_inc_mrrs) { int max_mrrs = pcie_get_readrq(dev); if (rq > max_mrrs) { -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6BWFP -------------------------------- fix kabi error caused by pm_suspend_target_state,used only by loongson devices. Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/pci/pci.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f187181cccb6..24715791cd69 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -32,7 +32,9 @@ #include <asm/dma.h> #include <linux/aer.h> #include <linux/bitfield.h> +#ifdef CONFIG_MACH_LOONGSON64 #include <linux/suspend.h> +#endif #include "pci.h" DEFINE_MUTEX(pci_slot_mutex); @@ -166,11 +168,15 @@ static bool pci_bridge_d3_disable; /* Force bridge_d3 for all PCIe ports */ static bool pci_bridge_d3_force; +#ifdef CONFIG_MACH_LOONGSON64 + #ifndef CONFIG_PM_SLEEP suspend_state_t pm_suspend_target_state; #define pm_suspend_target_state (PM_SUSPEND_ON) #endif +#endif + static int __init pcie_port_pm_setup(char *str) { if (!strcmp(str, "off")) @@ -6028,8 +6034,9 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) { u16 v; int ret; +#ifdef CONFIG_MACH_LOONGSON64 struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus); - +#endif if (rq < 128 || rq > 4096 || !is_power_of_2(rq)) return -EINVAL; @@ -6047,6 +6054,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) v = (ffs(rq) - 8) << 12; +#ifdef CONFIG_MACH_LOONGSON64 if (pm_suspend_target_state == PM_SUSPEND_ON && bridge->no_inc_mrrs) { int max_mrrs = pcie_get_readrq(dev); @@ -6056,6 +6064,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) return -EINVAL; } } +#endif ret = pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_READRQ, v); -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6BWFP -------------------------------- Fix some pcie card not scanning properly when bus number is inconsistent during firmware and kernel scan phases. Signed-off-by: liuyun <liuyun@loongson.cn> Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/pci/controller/pci-loongson.c | 34 +++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index d8aac17acdb6..cfc4633f2b86 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -214,6 +214,36 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, return NULL; } +static int pci_loongson_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + void __iomem *addr; + + addr = bus->ops->map_bus(bus, devfn, where); + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (size == 1) + *val = readb(addr); + else if (size == 2) + *val = readw(addr); + else + *val = readl(addr); + /* + * fix some pcie card not scanning properly when bus number is + * inconsistent during firmware and kernel scan phases. + */ + if (*val == 0x0 && where == PCI_VENDOR_ID) { + writel(*val, addr); + *val = readl(addr); + } + + + return PCIBIOS_SUCCESSFUL; +} + #ifdef CONFIG_OF static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) @@ -237,7 +267,7 @@ static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) /* LS2K/LS7A accept 8/16/32-bit PCI config operations */ static struct pci_ops loongson_pci_ops = { .map_bus = pci_loongson_map_bus, - .read = pci_generic_config_read, + .read = pci_loongson_config_read, .write = pci_generic_config_write, }; @@ -364,7 +394,7 @@ const struct pci_ecam_ops loongson_pci_ecam_ops = { .init = loongson_pci_ecam_init, .pci_ops = { .map_bus = pci_loongson_map_bus, - .read = pci_generic_config_read, + .read = pci_loongson_config_read, .write = pci_generic_config_write, } }; -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6BWFP -------------------------------- Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/pci/controller/pci-loongson.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index cfc4633f2b86..5b74c397cee7 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -81,6 +81,20 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_LPC, system_bus_quirk); +static void loongson_d3_quirk(struct pci_dev *pdev) +{ + pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; + pdev->no_d1d2 = 1; +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT3, loongson_d3_quirk); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT4, loongson_d3_quirk); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT5, loongson_d3_quirk); +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_PCIE_PORT6, loongson_d3_quirk); + static void loongson_mrrs_quirk(struct pci_dev *pdev) { /* -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6BWFP -------------------------------- Add window to solve GPU access error Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/pci/controller/pci-loongson.c | 38 +++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 5b74c397cee7..5df013b86f03 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -149,6 +149,44 @@ static void loongson_ohci_quirk(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_OHCI, loongson_ohci_quirk); +static void loongson_display_quirk(struct pci_dev *dev) +{ + u32 val; + u64 mask, size; + u64 max_size = 0; + int i, num; + struct pci_bus *bus = dev->bus; + + if (!dev->bus->number) { + if (!(dev->vendor == PCI_VENDOR_ID_LOONGSON && dev->device == 0x7a25)) + return; + } else { + while (!pci_is_root_bus(bus->parent)) + bus = bus->parent; + + /* ensure slot is 7a2000 */ + if (bus->self->vendor != PCI_VENDOR_ID_LOONGSON || bus->self->device < 0x7a39) + return; + } + max_size = 0; + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (dev->resource[i].flags & IORESOURCE_MEM) { + size = dev->resource[i].end - dev->resource[i].start; + if (size > max_size) { + max_size = size; + num = i; + } + } + } + mask = ~(dev->resource[num].end - dev->resource[num].start); + val = (dev->resource[num].start >> (24 - 16)) | ((mask >> 24) & 0xffff); + writel(val, (volatile void *)0x80000efdfb000174UL); + writel(0x80000000, (volatile void *)0x80000efdfb000170UL); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, 0x7a25, loongson_display_quirk); +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, + PCI_BASE_CLASS_DISPLAY, 16, loongson_display_quirk); + static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) { struct pci_config_window *cfg; -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6BWFP -------------------------------- According to PCI-to-PCI bridge spec, bit 3 of Bridge Control Register is VGA Enable bit which modifies the response by the bridge to VGA compatible addresses. The Bridge Control register provides extensions to the Command register that are specific to a bridge. The Bridge Control register provides many of the same controls for the secondary interface that are provided by the Command register for the primary interface. There are some bits that affect the operation of both interfaces of the bridge. If the VGA Enable bit is set, the bridge will positively decode and forward the following accesses on the primary interface to the secondary interface (and, conversely, block the forwarding of these addresses from the secondary to primary interface) Forwarding of these accesses is qualified by the I/O Enable and Memory Enable bits in the Command register.) The default state of this bit after reset must be 0. Bit 3 of Bridge Control Register is VGA Enable bit which modifies the response by the bridge to VGA compatible addresses. when 0: do not forward VGA compatible memory and I/O addresses from the primary to secondary interface (addresses defined below) unless they are enabled for forwarding by the defined I/O when 1: forward VGA compatible memory and I/O addresses (addresses defined below) from the primary interface to the secondary interface (if the I/O Enable and Memory Enable bits are set) independent of the I/O and memory address ranges and independent of the ISA Enable bit * memory accesses in the range 000A 0000h to 000B FFFFh * I/O addresses in the first 64 KB of the I/O address space (AD[31:16] are 0000h) where AD[9:: 0] are in the ranges 3B0h to 3BBh and 3C0h to 3DFh (inclusive of ISA address aliases - AD[15::10] are not decoded) If the VGA Enable bit is set, forwarding of these accesses is independent of the I/O address range and memory address ranges defined by the I/O Base and Limit registers, the Memory Base and Limit registers, and the Prefetchable Memory Base and Limit registers of the bridge. Forwarding of these accesses is also independent of the settings of the ISA Enable bit (in the Bridge Control register) or VGA Palette Snoop bits (in the Command register). The AST2500 hardward we are using do not set the VGA Enable bit on its bridge control reg, this cause vgaarb subsystem don't think the VGA card behind this pridge as a valid boot vga device which made X server choose wrong video card to use when multiple video card present in the system. Its seems more vgaarb's fault than the ast2500 bmc itself. even through bit 3 of Bridge Control Register is 0, it should still allow to forward the accesses when the addresses is in the range of IO/MEM Base and Limit registers. Nevertheless, in order to support loongson CPU product line, we provide a workaround to this bug for the Sugon L620-G30 and Sugon L820-G30 server. see similar bug: https://patchwork.kernel.org/project/linux-pci/patch/20170619023528.11532-1-... Signed-off-by: suijingfeng <suijingfeng@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/pci/controller/pci-loongson.c | 48 +++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 5df013b86f03..57a2241bfe92 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -11,6 +11,7 @@ #include <linux/pci_ids.h> #include <linux/pci-acpi.h> #include <linux/pci-ecam.h> +#include <linux/vgaarb.h> #include "../pci.h" @@ -187,6 +188,53 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, 0x7a25, loongson_display_quirk); DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY, 16, loongson_display_quirk); +static void pci_fixup_aspeed(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + struct pci_dev *vdevp = NULL; + u16 config; + + bus = pdev->bus; + bridge = bus->self; + + /* Is VGA routed to us? */ + if (bridge && (pci_is_bridge(bridge))) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &config); + + /* Yes, this bridge is PCI bridge-to-bridge spec compliant, + * just return! + */ + if (config & PCI_BRIDGE_CTL_VGA) + return; + + dev_warn(&pdev->dev, "VGA bridge control is not enabled\n"); + } + + /* Just return if the system already have a default device */ + if (vga_default_device()) + return; + + /* No default vga device */ + while ((vdevp = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, vdevp))) { + if (vdevp->vendor != 0x1a03) { + /* Have other vga devcie in the system, do nothing */ + dev_info(&pdev->dev, + "Another boot vga device: 0x%x:0x%x\n", + vdevp->vendor, vdevp->device); + return; + } + } + + vga_set_default_device(pdev); + + dev_info(&pdev->dev, + "Boot vga device set as 0x%x:0x%x\n", + pdev->vendor, pdev->device); +} +DECLARE_PCI_FIXUP_CLASS_FINAL(0x1a03, 0x2000, + PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_aspeed); + static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) { struct pci_config_window *cfg; -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6BWFP -------------------------------- Fix patch "LoongArch: Add PCI controller support" Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- arch/loongarch/pci/acpi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/loongarch/pci/acpi.c b/arch/loongarch/pci/acpi.c index a0d282938cf1..0670a2ed4349 100644 --- a/arch/loongarch/pci/acpi.c +++ b/arch/loongarch/pci/acpi.c @@ -26,16 +26,17 @@ void pcibios_add_bus(struct pci_bus *bus) int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) { - struct acpi_device *adev = NULL; - struct device *bus_dev = &bridge->bus->dev; - struct pci_config_window *cfg = bridge->bus->sysdata; - if (!acpi_disabled) - adev = to_acpi_device(cfg->parent); + if (!acpi_disabled) { + struct acpi_device *adev = NULL; + struct device *bus_dev = &bridge->bus->dev; + struct pci_config_window *cfg = bridge->bus->sysdata; - ACPI_COMPANION_SET(&bridge->dev, adev); - set_dev_node(bus_dev, pa_to_nid(cfg->res.start)); + adev = to_acpi_device(cfg->parent); + ACPI_COMPANION_SET(&bridge->dev, adev); + set_dev_node(bus_dev, pa_to_nid(cfg->res.start)); + } return 0; } -- 2.33.0
LoongArch inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7362E -------------------------------- Signed-off-by: liuyun <liuyun@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/irqchip/irq-loongson-pch-pic.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c index 01de22bb4f0c..f5b46ef7cbce 100644 --- a/drivers/irqchip/irq-loongson-pch-pic.c +++ b/drivers/irqchip/irq-loongson-pch-pic.c @@ -406,14 +406,12 @@ static int __init acpi_cascade_irqdomain_init(void) int __init pch_pic_acpi_init(struct irq_domain *parent, struct acpi_madt_bio_pic *acpi_pchpic) { - int ret, vec_base; + int ret; struct fwnode_handle *domain_handle; if (find_pch_pic(acpi_pchpic->gsi_base) >= 0) return 0; - vec_base = acpi_pchpic->gsi_base - GSI_MIN_PCH_IRQ; - domain_handle = irq_domain_alloc_fwnode(&acpi_pchpic->address); if (!domain_handle) { pr_err("Unable to allocate domain handle\n"); @@ -421,7 +419,7 @@ int __init pch_pic_acpi_init(struct irq_domain *parent, } ret = pch_pic_init(acpi_pchpic->address, acpi_pchpic->size, - vec_base, parent, domain_handle, acpi_pchpic->gsi_base); + 0, parent, domain_handle, acpi_pchpic->gsi_base); if (ret < 0) { irq_domain_free_fwnode(domain_handle); -- 2.33.0
LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7AHL9 -------------------------------- Signed-off-by: Juxin Gao <gaojuxin@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> --- drivers/pci/msi/msi.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/pci/msi/msi.c b/drivers/pci/msi/msi.c index ef1d8857a51b..8298d02a667b 100644 --- a/drivers/pci/msi/msi.c +++ b/drivers/pci/msi/msi.c @@ -402,12 +402,32 @@ static int msi_capability_init(struct pci_dev *dev, int nvec, return ret; } +#ifdef CONFIG_LOONGARCH +static unsigned int pci_irq_numbers = 32; + +static int __init pci_irq_limit(char *str) +{ + get_option(&str, &pci_irq_numbers); + + if (pci_irq_numbers == 0) + pci_irq_numbers = 32; + return 0; +} + +early_param("pci_irq_limit", pci_irq_limit); +#endif + int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec, struct irq_affinity *affd) { int nvec; int rc; +#ifdef CONFIG_LOONGARCH + if (maxvec > 32) + maxvec = pci_irq_numbers; +#endif + if (!pci_msi_supported(dev, minvec) || dev->current_state != PCI_D0) return -EINVAL; @@ -778,6 +798,11 @@ int __pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, int { int hwsize, rc, nvec = maxvec; +#ifdef CONFIG_LOONGARCH + if (maxvec > 32) + nvec = pci_irq_numbers; +#endif + if (maxvec < minvec) return -ERANGE; -- 2.33.0
反馈： 您发送到kernel@openeuler.org的补丁/补丁集，已成功转换为PR！ PR链接地址： https://gitee.com/openeuler/kernel/pulls/2315 邮件列表地址：https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/H... FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/2315 Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/H...
participants (2)
-
Hongchen Zhang -
patchwork bot