Currently, x86, Riscv, Loongarch use the Generic Entry which makes maintainers' work easier and codes more elegant. arm64 has already successfully switched to the Generic IRQ Entry in commit b3cf07851b6c ("arm64: entry: Switch to generic IRQ entry"), it is time to completely convert arm64 to Generic Entry. The goal is to bring arm64 in line with other architectures that already use the generic entry infrastructure, reducing duplicated code and making it easier to share future changes in entry/exit paths, such as "Syscall User Dispatch". This patch set is rebased on arm64 (for-next/entry). And the performance was measured on Kunpeng 920 using "perf bench basic syscall" with "arm64.nopauth selinux=0 audit=1". After switch to Generic Entry, the performance are below: | Metric | W/O Generic Framework | With Generic Framework | Change | | ---------- | --------------------- | ---------------------- | ------ | | Total time | 2.487 [sec] | 2.393[sec] | ↓3.8% | | usecs/op | 0.248780 | 0.239361 | ↓3.8% | | ops/sec | 4,019,620 | 4,177,789 | ↑3.9% | Compared to earlier with arch specific handling, the performance improved by approximately 3.9%. On the basis of optimizing syscall_get_arguments()[1], el0_svc_common() and syscall_exit_work(), the performance are below: | Metric | W/O Generic Entry | With Generic Entry opt| Change | | ---------- | ----------------- | ------------------ | ------ | | Total time | 2.487 [sec] | 2.264 [sec] | ↓9.0% | | usecs/op | 0.248780 | 0.226481 | ↓9.0% | | ops/sec | 4,019,620 | 4,415,383 | ↑9.8% | Therefore, after the optimization, ARM64 System Call performance improved by approximately 9%. It was tested ok with following test cases on kunpeng920 and QEMU virt platform: - Perf tests. - Different `dynamic preempt` mode switch. - Pseudo NMI tests. - Stress-ng CPU stress test. - Hackbench stress test. - MTE test case in Documentation/arch/arm64/memory-tagging-extension.rst and all test cases in tools/testing/selftests/arm64/mte/*. - "sud" selftest testcase. - get_set_sud, get_syscall_info, set_syscall_info, peeksiginfo in tools/testing/selftests/ptrace. - breakpoint_test_arm64 in selftests/breakpoints. - syscall-abi and ptrace in tools/testing/selftests/arm64/abi - fp-ptrace, sve-ptrace, za-ptrace in selftests/arm64/fp. - vdso_test_getrandom in tools/testing/selftests/vDSO - Strace tests. The test QEMU configuration is as follows: qemu-system-aarch64 \ -M virt,gic-version=3,virtualization=on,mte=on \ -cpu max,pauth-impdef=on \ -kernel Image \ -smp 8,sockets=1,cores=4,threads=2 \ -m 512m \ -nographic \ -no-reboot \ -device virtio-rng-pci \ -append "root=/dev/vda rw console=ttyAMA0 kgdboc=ttyAMA0,115200 \ earlycon preempt=voluntary irqchip.gicv3_pseudo_nmi=1" \ -drive if=none,file=images/rootfs.ext4,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0 \ [1]: https://kernel.googlesource.com/pub/scm/linux/kernel/git/akpm/mm/+/89bf683c9... Changes in v11: - Remove unused syscall in syscall_trace_enter(). - Update and provide a detailed explanation of the differences after moving rseq_syscall() before audit_syscall_exit(). - Rebased on arm64 (for-next/entry), and remove the first applied 3 patchs. - syscall_exit_to_user_mode_work() for arch reuse instead of adding new syscall_exit_to_user_mode_work_prepare() helper. - Link to v10: https://lore.kernel.org/all/20251222114737.1334364-1-ruanjinjie@huawei.com/ Changes in v10: - Rebased on v6.19-rc1, rename syscall_exit_to_user_mode_prepare() to syscall_exit_to_user_mode_work_prepare() to avoid conflict. - Also inline syscall_trace_enter(). - Support aarch64 for sud_benchmark. - Update and correct the commit message. - Add Reviewed-by. - Link to v9: https://lore.kernel.org/all/20251204082123.2792067-1-ruanjinjie@huawei.com/ Changes in v9: - Move "Return early for ptrace_report_syscall_entry() error" patch ahead to make it not introduce a regression. - Not check _TIF_SECCOMP/SYSCALL_EMU for syscall_exit_work() in a separate patch. - Do not report_syscall_exit() for PTRACE_SYSEMU_SINGLESTEP in a separate patch. - Add two performance patch to improve the arm64 performance. - Add Reviewed-by. - Link to v8: https://lore.kernel.org/all/20251126071446.3234218-1-ruanjinjie@huawei.com/ Changes in v8: - Rename "report_syscall_enter()" to "report_syscall_entry()". - Add ptrace_save_reg() to avoid duplication. - Remove unused _TIF_WORK_MASK in a standalone patch. - Align syscall_trace_enter() return value with the generic version. - Use "scno" instead of regs->syscallno in el0_svc_common(). - Move rseq_syscall() ahead in a standalone patch to clarify it clearly. - Rename "syscall_trace_exit()" to "syscall_exit_work()". - Keep the goto in el0_svc_common(). - No argument was passed to __secure_computing() and check -1 not -1L. - Remove "Add has_syscall_work() helper" patch. - Move "Add syscall_exit_to_user_mode_prepare() helper" patch later. - Add miss header for asm/entry-common.h. - Update the implementation of arch_syscall_is_vdso_sigreturn(). - Add "ARCH_SYSCALL_WORK_EXIT" to be defined as "SECCOMP | SYSCALL_EMU" to keep the behaviour unchanged. - Add more testcases test. - Add Reviewed-by. - Update the commit message. - Link to v7: https://lore.kernel.org/all/20251117133048.53182-1-ruanjinjie@huawei.com/ Chanegs in v7: - Support "Syscall User Dispatch" by implementing arch_syscall_is_vdso_sigreturn() as kemal suggested. - Add aarch64 support for "sud" selftest testcase, which tested ok with the patch series. - Fix the kernel test robot warning for arch_ptrace_report_syscall_entry() and arch_ptrace_report_syscall_exit() in asm/entry-common.h. - Add perf syscall performance test. - Link to v6: https://lore.kernel.org/all/20250916082611.2972008-1-ruanjinjie@huawei.com/ Changes in v6: - Rebased on v6.17-rc5-next as arm64 generic irq entry has merged. - Update the commit message. - Link to v5: https://lore.kernel.org/all/20241206101744.4161990-1-ruanjinjie@huawei.com/ Changes in v5: - Not change arm32 and keep inerrupts_enabled() macro for gicv3 driver. - Move irqentry_state definition into arch/arm64/kernel/entry-common.c. - Avoid removing the __enter_from_*() and __exit_to_*() wrappers. - Update "irqentry_state_t ret/irq_state" to "state" to keep it consistently. - Use generic irq entry header for PREEMPT_DYNAMIC after split the generic entry. - Also refactor the ARM64 syscall code. - Introduce arch_ptrace_report_syscall_entry/exit(), instead of arch_pre/post_report_syscall_entry/exit() to simplify code. - Make the syscall patches clear separation. - Update the commit message. - Link to v4: https://lore.kernel.org/all/20241025100700.3714552-1-ruanjinjie@huawei.com/ Changes in v4: - Rework/cleanup split into a few patches as Mark suggested. - Replace interrupts_enabled() macro with regs_irqs_disabled(), instead of left it here. - Remove rcu and lockdep state in pt_regs by using temporary irqentry_state_t as Mark suggested. - Remove some unnecessary intermediate functions to make it clear. - Rework preempt irq and PREEMPT_DYNAMIC code to make the switch more clear. - arch_prepare_*_entry/exit() -> arch_pre_*_entry/exit(). - Expand the arch functions comment. - Make arch functions closer to its caller. - Declare saved_reg in for block. - Remove arch_exit_to_kernel_mode_prepare(), arch_enter_from_kernel_mode(). - Adjust "Add few arch functions to use generic entry" patch to be the penultimate. - Update the commit message. - Add suggested-by. - Link to v3: https://lore.kernel.org/all/20240629085601.470241-1-ruanjinjie@huawei.com/ Changes in v3: - Test the MTE test cases. - Handle forget_syscall() in arch_post_report_syscall_entry() - Make the arch funcs not use __weak as Thomas suggested, so move the arch funcs to entry-common.h, and make arch_forget_syscall() folded in arch_post_report_syscall_entry() as suggested. - Move report_single_step() to thread_info.h for arm64 - Change __always_inline() to inline, add inline for the other arch funcs. - Remove unused signal.h for entry-common.h. - Add Suggested-by. - Update the commit message. Changes in v2: - Add tested-by. - Fix a bug that not call arch_post_report_syscall_entry() in syscall_trace_enter() if ptrace_report_syscall_entry() return not zero. - Refactor report_syscall(). - Add comment for arch_prepare_report_syscall_exit(). - Adjust entry-common.h header file inclusion to alphabetical order. - Update the commit message. Jinjie Ruan (13): entry: Remove unused syscall in syscall_trace_enter() arm64/ptrace: Refactor syscall_trace_enter/exit() arm64: ptrace: Move rseq_syscall() before audit_syscall_exit() arm64: syscall: Rework el0_svc_common() arm64/ptrace: Not check _TIF_SECCOMP/SYSCALL_EMU for syscall_exit_work() arm64/ptrace: Do not report_syscall_exit() for PTRACE_SYSEMU_SINGLESTEP arm64/ptrace: Expand secure_computing() in place arm64/ptrace: Use syscall_get_arguments() helper entry: Rework syscall_exit_to_user_mode_work() for arch reuse entry: Add arch_ptrace_report_syscall_entry/exit() arm64: entry: Convert to generic entry arm64: Inline el0_svc_common() entry: Inline syscall_exit_work() and syscall_trace_enter() kemal (1): selftests: sud_test: Support aarch64 arch/arm64/Kconfig | 2 +- arch/arm64/include/asm/entry-common.h | 76 +++++++++ arch/arm64/include/asm/syscall.h | 19 ++- arch/arm64/include/asm/thread_info.h | 16 +- arch/arm64/kernel/debug-monitors.c | 7 + arch/arm64/kernel/ptrace.c | 115 ------------- arch/arm64/kernel/signal.c | 2 +- arch/arm64/kernel/syscall.c | 29 +--- include/linux/entry-common.h | 158 ++++++++++++++++-- kernel/entry/common.h | 7 - kernel/entry/syscall-common.c | 96 +---------- kernel/entry/syscall_user_dispatch.c | 4 +- .../syscall_user_dispatch/sud_benchmark.c | 2 +- .../syscall_user_dispatch/sud_test.c | 4 + 14 files changed, 268 insertions(+), 269 deletions(-) delete mode 100644 kernel/entry/common.h -- 2.34.1
The 'syscall' argument in syscall_trace_enter() is immediately overwritten before any real use and serves only as a local variable, so drop the parameter. No functional change intended. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- include/linux/entry-common.h | 4 ++-- kernel/entry/syscall-common.c | 5 ++--- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/include/linux/entry-common.h b/include/linux/entry-common.h index 87efb38b7081..e4a8287af822 100644 --- a/include/linux/entry-common.h +++ b/include/linux/entry-common.h @@ -45,7 +45,7 @@ SYSCALL_WORK_SYSCALL_EXIT_TRAP | \ ARCH_SYSCALL_WORK_EXIT) -long syscall_trace_enter(struct pt_regs *regs, long syscall, unsigned long work); +long syscall_trace_enter(struct pt_regs *regs, unsigned long work); /** * syscall_enter_from_user_mode_work - Check and handle work before invoking @@ -75,7 +75,7 @@ static __always_inline long syscall_enter_from_user_mode_work(struct pt_regs *re unsigned long work = READ_ONCE(current_thread_info()->syscall_work); if (work & SYSCALL_WORK_ENTER) - syscall = syscall_trace_enter(regs, syscall, work); + syscall = syscall_trace_enter(regs, work); return syscall; } diff --git a/kernel/entry/syscall-common.c b/kernel/entry/syscall-common.c index 940a597ded40..e6237b536d8b 100644 --- a/kernel/entry/syscall-common.c +++ b/kernel/entry/syscall-common.c @@ -17,10 +17,9 @@ static inline void syscall_enter_audit(struct pt_regs *regs, long syscall) } } -long syscall_trace_enter(struct pt_regs *regs, long syscall, - unsigned long work) +long syscall_trace_enter(struct pt_regs *regs, unsigned long work) { - long ret = 0; + long syscall, ret = 0; /* * Handle Syscall User Dispatch. This must comes first, since -- 2.34.1
The generic syscall entry code has the following form, which use the input syscall work flag: | syscall_trace_enter(struct pt_regs *regs, unsigned long work) | | syscall_exit_work(struct pt_regs *regs, unsigned long work) In preparation for moving arm64 over to the generic entry code, refactor syscall_trace_enter/exit() to also pass thread flags, and get syscall number by syscall_get_nr() helper. No functional changes. Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/include/asm/syscall.h | 4 ++-- arch/arm64/kernel/ptrace.c | 26 +++++++++++++++++--------- arch/arm64/kernel/syscall.c | 5 +++-- 3 files changed, 22 insertions(+), 13 deletions(-) diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h index 5e4c7fc44f73..30b203ef156b 100644 --- a/arch/arm64/include/asm/syscall.h +++ b/arch/arm64/include/asm/syscall.h @@ -120,7 +120,7 @@ static inline int syscall_get_arch(struct task_struct *task) return AUDIT_ARCH_AARCH64; } -int syscall_trace_enter(struct pt_regs *regs); -void syscall_trace_exit(struct pt_regs *regs); +int syscall_trace_enter(struct pt_regs *regs, unsigned long flags); +void syscall_trace_exit(struct pt_regs *regs, unsigned long flags); #endif /* __ASM_SYSCALL_H */ diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index f333791ffba6..9f9aa3087c09 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -2407,9 +2407,9 @@ static void report_syscall_exit(struct pt_regs *regs) } } -int syscall_trace_enter(struct pt_regs *regs) +int syscall_trace_enter(struct pt_regs *regs, unsigned long flags) { - unsigned long flags = read_thread_flags(); + long syscall; int ret; if (flags & (_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE)) { @@ -2422,19 +2422,27 @@ int syscall_trace_enter(struct pt_regs *regs) if (secure_computing() == -1) return NO_SYSCALL; - if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) - trace_sys_enter(regs, regs->syscallno); + /* Either of the above might have changed the syscall number */ + syscall = syscall_get_nr(current, regs); - audit_syscall_entry(regs->syscallno, regs->orig_x0, regs->regs[1], + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) { + trace_sys_enter(regs, syscall); + + /* + * Probes or BPF hooks in the tracepoint may have changed the + * system call number as well. + */ + syscall = syscall_get_nr(current, regs); + } + + audit_syscall_entry(syscall, regs->orig_x0, regs->regs[1], regs->regs[2], regs->regs[3]); - return regs->syscallno; + return syscall; } -void syscall_trace_exit(struct pt_regs *regs) +void syscall_trace_exit(struct pt_regs *regs, unsigned long flags) { - unsigned long flags = read_thread_flags(); - audit_syscall_exit(regs); if (flags & _TIF_SYSCALL_TRACEPOINT) diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index c062badd1a56..e8fd0d60ab09 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -124,7 +124,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, */ if (scno == NO_SYSCALL) syscall_set_return_value(current, regs, -ENOSYS, 0); - scno = syscall_trace_enter(regs); + scno = syscall_trace_enter(regs, flags); if (scno == NO_SYSCALL) goto trace_exit; } @@ -143,7 +143,8 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, } trace_exit: - syscall_trace_exit(regs); + flags = read_thread_flags(); + syscall_trace_exit(regs, flags); } void do_el0_svc(struct pt_regs *regs) -- 2.34.1
commit a9f3a74a29af ("entry: Provide generic syscall exit function") introduce generic syscall exit function and call rseq_syscall() before audit_syscall_exit() and arch_syscall_exit_tracehook(). And commit b74406f37737 ("arm: Add syscall detection for restartable sequences") add rseq support for arm32, which also call rseq_syscall() before audit_syscall_exit() and tracehook_report_syscall(). However, commit 409d5db49867c ("arm64: rseq: Implement backend rseq calls and select HAVE_RSEQ") implement arm64 rseq and call rseq_syscall() after audit_syscall_exit() and tracehook_report_syscall(). So compared to the generic entry and arm32 code, arm64 calls rseq_syscall() a bit later. But as commit b74406f37737 ("arm: Add syscall detection for restartable sequences") said, syscalls are not allowed inside restartable sequences, so should call rseq_syscall() at the very beginning of system call exiting path for CONFIG_DEBUG_RSEQ=y kernel. This could help us to detect whether there is a syscall issued inside restartable sequences. As for the impact of raising SIGSEGV via rseq_syscall(), it makes no practical difference to signal delivery because signals are processed in arm64_exit_to_user_mode() at the very end. As for the "regs", rseq_syscall() only checks and update instruction_pointer(regs), ptrace can not modify the "pc" on syscall exit path but 'only changes the return value', so calling rseq_syscall() before or after ptrace_report_syscall_exit() makes no difference. And audit_syscall_exit() only checks the return value (x0 for arm64), so calling rseq_syscall() before or after audit syscall exit makes no difference. trace_sys_exit() only uses syscallno and the return value, so calling rseq_syscall() before or after trace_sys_exit() also makes no difference. In preparation for moving arm64 over to the generic entry code, move rseq_syscall() ahead before audit_syscall_exit(). No functional changes. Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/kernel/ptrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 9f9aa3087c09..785280c76317 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -2443,6 +2443,8 @@ int syscall_trace_enter(struct pt_regs *regs, unsigned long flags) void syscall_trace_exit(struct pt_regs *regs, unsigned long flags) { + rseq_syscall(regs); + audit_syscall_exit(regs); if (flags & _TIF_SYSCALL_TRACEPOINT) @@ -2450,8 +2452,6 @@ void syscall_trace_exit(struct pt_regs *regs, unsigned long flags) if (flags & (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP)) report_syscall_exit(regs); - - rseq_syscall(regs); } /* -- 2.34.1
The generic syscall syscall_exit_work() has the following content: | audit_syscall_exit(regs) | trace_sys_exit(regs, ...) | ptrace_report_syscall_exit(regs, step) The generic syscall syscall_exit_to_user_mode_work() has the following form: | unsigned long work = READ_ONCE(current_thread_info()->syscall_work) | rseq_syscall() | if (unlikely(work & SYSCALL_WORK_EXIT)) | syscall_exit_work(regs, work) In preparation for moving arm64 over to the generic entry code, rework el0_svc_common() as below: - Rename syscall_trace_exit() to syscall_exit_work(). - Add syscall_exit_to_user_mode_work() function to replace the combination of read_thread_flags() and syscall_exit_work(), also move the syscall exit check logic into it. Move has_syscall_work() helper into asm/syscall.h for reuse. - As currently rseq_syscall() is always called and itself is controlled by the CONFIG_DEBUG_RSEQ macro, so the CONFIG_DEBUG_RSEQ check is removed. Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/include/asm/syscall.h | 7 ++++++- arch/arm64/kernel/ptrace.c | 14 +++++++++++--- arch/arm64/kernel/syscall.c | 20 +------------------- 3 files changed, 18 insertions(+), 23 deletions(-) diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h index 30b203ef156b..c469d09a7964 100644 --- a/arch/arm64/include/asm/syscall.h +++ b/arch/arm64/include/asm/syscall.h @@ -120,7 +120,12 @@ static inline int syscall_get_arch(struct task_struct *task) return AUDIT_ARCH_AARCH64; } +static inline bool has_syscall_work(unsigned long flags) +{ + return unlikely(flags & _TIF_SYSCALL_WORK); +} + int syscall_trace_enter(struct pt_regs *regs, unsigned long flags); -void syscall_trace_exit(struct pt_regs *regs, unsigned long flags); +void syscall_exit_to_user_mode_work(struct pt_regs *regs); #endif /* __ASM_SYSCALL_H */ diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 785280c76317..bf8af5247db4 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -2441,10 +2441,8 @@ int syscall_trace_enter(struct pt_regs *regs, unsigned long flags) return syscall; } -void syscall_trace_exit(struct pt_regs *regs, unsigned long flags) +static void syscall_exit_work(struct pt_regs *regs, unsigned long flags) { - rseq_syscall(regs); - audit_syscall_exit(regs); if (flags & _TIF_SYSCALL_TRACEPOINT) @@ -2454,6 +2452,16 @@ void syscall_trace_exit(struct pt_regs *regs, unsigned long flags) report_syscall_exit(regs); } +void syscall_exit_to_user_mode_work(struct pt_regs *regs) +{ + unsigned long flags = read_thread_flags(); + + rseq_syscall(regs); + + if (has_syscall_work(flags) || flags & _TIF_SINGLESTEP) + syscall_exit_work(regs, flags); +} + /* * SPSR_ELx bits which are always architecturally RES0 per ARM DDI 0487D.a. * We permit userspace to set SSBS (AArch64 bit 12, AArch32 bit 23) which is diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index e8fd0d60ab09..66d4da641d97 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -65,11 +65,6 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno, choose_random_kstack_offset(get_random_u16()); } -static inline bool has_syscall_work(unsigned long flags) -{ - return unlikely(flags & _TIF_SYSCALL_WORK); -} - static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, const syscall_fn_t syscall_table[]) { @@ -130,21 +125,8 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, } invoke_syscall(regs, scno, sc_nr, syscall_table); - - /* - * The tracing status may have changed under our feet, so we have to - * check again. However, if we were tracing entry, then we always trace - * exit regardless, as the old entry assembly did. - */ - if (!has_syscall_work(flags) && !IS_ENABLED(CONFIG_DEBUG_RSEQ)) { - flags = read_thread_flags(); - if (!has_syscall_work(flags) && !(flags & _TIF_SINGLESTEP)) - return; - } - trace_exit: - flags = read_thread_flags(); - syscall_trace_exit(regs, flags); + syscall_exit_to_user_mode_work(regs); } void do_el0_svc(struct pt_regs *regs) -- 2.34.1
As syscall_exit_work() do not handle seccomp, so not check _TIF_SECCOMP for syscall_exit_work(). And as the man manual of PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP said, "For PTRACE_SYSEMU, continue and stop on entry to the next system call, which will not be executed. For PTRACE_SYSEMU_SINGLESTEP, do the same but also singlestep if not a system call.". So only the syscall entry need to be reported for SYSCALL_EMU, so not check _TIF_SYSCALL_EMU for syscall_exit_work(). After this, audit_syscall_exit() and report_syscall_exit() will no longer be called if only SECCOMP and/or SYSCALL_EMU is set. And remove has_syscall_work() by the way as currently it is only used in el0_svc_common(). This is another preparation for moving arm64 over to the generic entry code. Link：https://man7.org/linux/man-pages/man2/ptrace.2.html Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/include/asm/syscall.h | 5 ----- arch/arm64/include/asm/thread_info.h | 3 +++ arch/arm64/kernel/ptrace.c | 2 +- arch/arm64/kernel/syscall.c | 2 +- 4 files changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h index c469d09a7964..dea392c081ca 100644 --- a/arch/arm64/include/asm/syscall.h +++ b/arch/arm64/include/asm/syscall.h @@ -120,11 +120,6 @@ static inline int syscall_get_arch(struct task_struct *task) return AUDIT_ARCH_AARCH64; } -static inline bool has_syscall_work(unsigned long flags) -{ - return unlikely(flags & _TIF_SYSCALL_WORK); -} - int syscall_trace_enter(struct pt_regs *regs, unsigned long flags); void syscall_exit_to_user_mode_work(struct pt_regs *regs); diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index 24fcd6adaa33..ef1462b9b00b 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -110,6 +110,9 @@ void arch_setup_new_exec(void); _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \ _TIF_SYSCALL_EMU) +#define _TIF_SYSCALL_EXIT_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SYSCALL_TRACEPOINT) + #ifdef CONFIG_SHADOW_CALL_STACK #define INIT_SCS \ .scs_base = init_shadow_call_stack, \ diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index bf8af5247db4..ec30a23e7e93 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -2458,7 +2458,7 @@ void syscall_exit_to_user_mode_work(struct pt_regs *regs) rseq_syscall(regs); - if (has_syscall_work(flags) || flags & _TIF_SINGLESTEP) + if (unlikely(flags & _TIF_SYSCALL_EXIT_WORK) || flags & _TIF_SINGLESTEP) syscall_exit_work(regs, flags); } diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index 66d4da641d97..ec478fc37a9f 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -101,7 +101,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, return; } - if (has_syscall_work(flags)) { + if (unlikely(flags & _TIF_SYSCALL_WORK)) { /* * The de-facto standard way to skip a system call using ptrace * is to set the system call to -1 (NO_SYSCALL) and set x0 to a -- 2.34.1
The generic report_single_step() always returns false if SYSCALL_EMU is set, but arm64 only checks _TIF_SINGLESTEP and does not check _TIF_SYSCALL_EMU, which means that if both _TIF_SINGLESTEP and _TIF_SYSCALL_EMU are set, the generic entry will not report a single-step, whereas arm64 will do it. As the man manual of PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP said, "For PTRACE_SYSEMU, continue and stop on entry to the next system call, which will not be executed. For PTRACE_SYSEMU_SINGLESTEP, do the same but also singlestep if not a system call.". And as the generic entry report_single_step() comment said, If SYSCALL_EMU is set, then the only reason to report is when SINGLESTEP is set (i.e. PTRACE_SYSEMU_SINGLESTEP). Because this syscall instruction has been already reported in syscall_trace_enter(), there is no need to report the syscall again in syscall_exit_work(). In preparation for moving arm64 over to the generic entry code, - Add report_single_step() helper for arm64 to make it clear. - Do not report_syscall_exit() if both _TIF_SYSCALL_EMU and _TIF_SINGLESTEP set. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/kernel/ptrace.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index ec30a23e7e93..cc2bac9c95d6 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -2441,14 +2441,25 @@ int syscall_trace_enter(struct pt_regs *regs, unsigned long flags) return syscall; } +static inline bool report_single_step(unsigned long flags) +{ + if (flags & _TIF_SYSCALL_EMU) + return false; + + return flags & _TIF_SINGLESTEP; +} + static void syscall_exit_work(struct pt_regs *regs, unsigned long flags) { + bool step; + audit_syscall_exit(regs); if (flags & _TIF_SYSCALL_TRACEPOINT) trace_sys_exit(regs, syscall_get_return_value(current, regs)); - if (flags & (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP)) + step = report_single_step(flags); + if (step || flags & _TIF_SYSCALL_TRACE) report_syscall_exit(regs); } -- 2.34.1
The generic entry expand secure_computing() in place and call __secure_computing() directly. In order to switch to the generic entry for arm64, refactor secure_computing() for syscall_trace_enter(). No functional changes. Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/kernel/ptrace.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index cc2bac9c95d6..57ea0e4aaf82 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -2419,8 +2419,11 @@ int syscall_trace_enter(struct pt_regs *regs, unsigned long flags) } /* Do the secure computing after ptrace; failures should be fast. */ - if (secure_computing() == -1) - return NO_SYSCALL; + if (flags & _TIF_SECCOMP) { + ret = __secure_computing(); + if (ret == -1) + return NO_SYSCALL; + } /* Either of the above might have changed the syscall number */ syscall = syscall_get_nr(current, regs); @@ -2438,7 +2441,7 @@ int syscall_trace_enter(struct pt_regs *regs, unsigned long flags) audit_syscall_entry(syscall, regs->orig_x0, regs->regs[1], regs->regs[2], regs->regs[3]); - return syscall; + return ret ? : syscall; } static inline bool report_single_step(unsigned long flags) -- 2.34.1
The generic entry check audit context first and use syscall_get_arguments() helper. In order to switch to the generic entry for arm64, - Also use syscall_get_arguments() to get audit_syscall_entry()'s last four parameters. - Extract the syscall_enter_audit() helper to make it clear. - Check audit context first, which saves an unnecessary memcpy when current process's audit_context is NULL. Overall these changes make syscall_enter_audit() exactly equivalent to the generic one. No functional changes. Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/kernel/ptrace.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 57ea0e4aaf82..6e86aec8d607 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -2407,6 +2407,16 @@ static void report_syscall_exit(struct pt_regs *regs) } } +static inline void syscall_enter_audit(struct pt_regs *regs, long syscall) +{ + if (unlikely(audit_context())) { + unsigned long args[6]; + + syscall_get_arguments(current, regs, args); + audit_syscall_entry(syscall, args[0], args[1], args[2], args[3]); + } +} + int syscall_trace_enter(struct pt_regs *regs, unsigned long flags) { long syscall; @@ -2438,8 +2448,7 @@ int syscall_trace_enter(struct pt_regs *regs, unsigned long flags) syscall = syscall_get_nr(current, regs); } - audit_syscall_entry(syscall, regs->orig_x0, regs->regs[1], - regs->regs[2], regs->regs[3]); + syscall_enter_audit(regs, syscall); return ret ? : syscall; } -- 2.34.1
In the generic entry code, the beginning of syscall_exit_to_user_mode_work() can be reused on arm64 so it makes sense to rework it. In preparation for moving arm64 over to the generic entry code, as nothing calls syscall_exit_to_user_mode_work() except for syscall_exit_to_user_mode(), move local_irq_disable_exit_to_user() and syscall_exit_to_user_mode_prepare() out from syscall_exit_to_user_mode_work() to the only one caller. Also update the comment and no functional changes. Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- include/linux/entry-common.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/linux/entry-common.h b/include/linux/entry-common.h index e4a8287af822..c4fea642d931 100644 --- a/include/linux/entry-common.h +++ b/include/linux/entry-common.h @@ -125,14 +125,14 @@ void syscall_exit_work(struct pt_regs *regs, unsigned long work); * syscall_exit_to_user_mode_work - Handle work before returning to user mode * @regs: Pointer to currents pt_regs * - * Same as step 1 and 2 of syscall_exit_to_user_mode() but without calling + * Same as step 1 of syscall_exit_to_user_mode() but without calling + * local_irq_disable(), syscall_exit_to_user_mode_prepare() and * exit_to_user_mode() to perform the final transition to user mode. * - * Calling convention is the same as for syscall_exit_to_user_mode() and it - * returns with all work handled and interrupts disabled. The caller must - * invoke exit_to_user_mode() before actually switching to user mode to - * make the final state transitions. Interrupts must stay disabled between - * return from this function and the invocation of exit_to_user_mode(). + * Calling convention is the same as for syscall_exit_to_user_mode(). The + * caller must invoke local_irq_disable(), __exit_to_user_mode_prepare() and + * exit_to_user_mode() before actually switching to user mode to + * make the final state transitions. */ static __always_inline void syscall_exit_to_user_mode_work(struct pt_regs *regs) { @@ -155,8 +155,6 @@ static __always_inline void syscall_exit_to_user_mode_work(struct pt_regs *regs) */ if (unlikely(work & SYSCALL_WORK_EXIT)) syscall_exit_work(regs, work); - local_irq_disable_exit_to_user(); - syscall_exit_to_user_mode_prepare(regs); } /** @@ -192,6 +190,8 @@ static __always_inline void syscall_exit_to_user_mode(struct pt_regs *regs) { instrumentation_begin(); syscall_exit_to_user_mode_work(regs); + local_irq_disable_exit_to_user(); + syscall_exit_to_user_mode_prepare(regs); instrumentation_end(); exit_to_user_mode(); } -- 2.34.1
Differ from generic entry, due to historical reasons, ARM64 need to save/restore during syscall entry/exit because ARM64 use a scratch register (ip(r12) on AArch32, x7 on AArch64) to denote syscall entry/exit. In preparation for moving arm64 over to the generic entry code, add arch_ptrace_report_syscall_entry/exit() as the default ptrace_report_syscall_entry/exit() implementation. This allows arm64 to implement the architecture specific version. This allows arm64 to implement the architecture specific version. Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- include/linux/entry-common.h | 39 +++++++++++++++++++++++++++++++++++ kernel/entry/syscall-common.c | 4 ++-- 2 files changed, 41 insertions(+), 2 deletions(-) diff --git a/include/linux/entry-common.h b/include/linux/entry-common.h index c4fea642d931..48bdde74a3e1 100644 --- a/include/linux/entry-common.h +++ b/include/linux/entry-common.h @@ -45,6 +45,25 @@ SYSCALL_WORK_SYSCALL_EXIT_TRAP | \ ARCH_SYSCALL_WORK_EXIT) +/** + * arch_ptrace_report_syscall_entry - Architecture specific + * ptrace_report_syscall_entry(). + * + * Invoked from syscall_trace_enter() to wrap ptrace_report_syscall_entry(). + * Defaults to ptrace_report_syscall_entry. + * + * The main purpose is to support arch-specific ptrace_report_syscall_entry() + * implementation. + */ +static __always_inline int arch_ptrace_report_syscall_entry(struct pt_regs *regs); + +#ifndef arch_ptrace_report_syscall_entry +static __always_inline int arch_ptrace_report_syscall_entry(struct pt_regs *regs) +{ + return ptrace_report_syscall_entry(regs); +} +#endif + long syscall_trace_enter(struct pt_regs *regs, unsigned long work); /** @@ -112,6 +131,26 @@ static __always_inline long syscall_enter_from_user_mode(struct pt_regs *regs, l return ret; } +/** + * arch_ptrace_report_syscall_exit - Architecture specific + * ptrace_report_syscall_exit. + * + * Invoked from syscall_exit_work() to wrap ptrace_report_syscall_exit(). + * + * The main purpose is to support arch-specific ptrace_report_syscall_exit + * implementation. + */ +static __always_inline void arch_ptrace_report_syscall_exit(struct pt_regs *regs, + int step); + +#ifndef arch_ptrace_report_syscall_exit +static __always_inline void arch_ptrace_report_syscall_exit(struct pt_regs *regs, + int step) +{ + ptrace_report_syscall_exit(regs, step); +} +#endif + /** * syscall_exit_work - Handle work before returning to user mode * @regs: Pointer to current pt_regs diff --git a/kernel/entry/syscall-common.c b/kernel/entry/syscall-common.c index e6237b536d8b..bb5f61f5629d 100644 --- a/kernel/entry/syscall-common.c +++ b/kernel/entry/syscall-common.c @@ -33,7 +33,7 @@ long syscall_trace_enter(struct pt_regs *regs, unsigned long work) /* Handle ptrace */ if (work & (SYSCALL_WORK_SYSCALL_TRACE | SYSCALL_WORK_SYSCALL_EMU)) { - ret = ptrace_report_syscall_entry(regs); + ret = arch_ptrace_report_syscall_entry(regs); if (ret || (work & SYSCALL_WORK_SYSCALL_EMU)) return -1L; } @@ -99,5 +99,5 @@ void syscall_exit_work(struct pt_regs *regs, unsigned long work) step = report_single_step(work); if (step || work & SYSCALL_WORK_SYSCALL_TRACE) - ptrace_report_syscall_exit(regs, step); + arch_ptrace_report_syscall_exit(regs, step); } -- 2.34.1
Currently, x86, Riscv, Loongarch use the generic entry which makes maintainers' work easier and codes more elegant. arm64 has already switched to the generic IRQ entry, so completely convert arm64 to use the generic entry infrastructure from kernel/entry/*. The changes are below: - Remove TIF_SYSCALL_* flag. - Remove _TIF_SYSCALL_WORK/EXIT_WORK as they are equal with SYSCALL_WORK_ENTER/EXIT. - Implement arch_ptrace_report_syscall_entry/exit() with report_syscall_entry/exit() to do arm64-specific save/restore during syscall entry/exit. - Remove arm64 syscall_trace_enter() and related sub-functions including syscall_enter_audit(), by calling generic entry's functions with similar functionality. - Set/clear SYSCALL_EXIT_TRAP flag when enable/disable single_step, So _TIF_SINGLESTEP can be replaced with generic SYSCALL_EXIT_TRAP, _TIF_SYSCALL_EXIT_WORK and _TIF_SINGLESTEP can be replaced with generic SYSCALL_WORK_EXIT, arm64's report_single_step() can be replaced with generic version. - Remove arm64's syscall_exit_to_user_mode_work() and syscall_exit_work() etc. by using generic entry's similar same name functions. - Implement arch_syscall_is_vdso_sigreturn() to support "Syscall User Dispatch". Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Suggested-by: Kevin Brodsky <kevin.brodsky@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/Kconfig | 2 +- arch/arm64/include/asm/entry-common.h | 76 +++++++++++++ arch/arm64/include/asm/syscall.h | 19 +++- arch/arm64/include/asm/thread_info.h | 19 +--- arch/arm64/kernel/debug-monitors.c | 7 ++ arch/arm64/kernel/ptrace.c | 154 -------------------------- arch/arm64/kernel/signal.c | 2 +- arch/arm64/kernel/syscall.c | 6 +- 8 files changed, 107 insertions(+), 178 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 93173f0a09c7..f50b49ce8b65 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -153,9 +153,9 @@ config ARM64 select GENERIC_CPU_DEVICES select GENERIC_CPU_VULNERABILITIES select GENERIC_EARLY_IOREMAP + select GENERIC_ENTRY select GENERIC_IDLE_POLL_SETUP select GENERIC_IOREMAP - select GENERIC_IRQ_ENTRY select GENERIC_IRQ_IPI select GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD select GENERIC_IRQ_PROBE diff --git a/arch/arm64/include/asm/entry-common.h b/arch/arm64/include/asm/entry-common.h index cab8cd78f693..d8bf4bf342e8 100644 --- a/arch/arm64/include/asm/entry-common.h +++ b/arch/arm64/include/asm/entry-common.h @@ -3,14 +3,21 @@ #ifndef _ASM_ARM64_ENTRY_COMMON_H #define _ASM_ARM64_ENTRY_COMMON_H +#include <linux/ptrace.h> #include <linux/thread_info.h> +#include <asm/compat.h> #include <asm/cpufeature.h> #include <asm/daifflags.h> #include <asm/fpsimd.h> #include <asm/mte.h> #include <asm/stacktrace.h> +enum ptrace_syscall_dir { + PTRACE_SYSCALL_ENTER = 0, + PTRACE_SYSCALL_EXIT, +}; + #define ARCH_EXIT_TO_USER_MODE_WORK (_TIF_MTE_ASYNC_FAULT | _TIF_FOREIGN_FPSTATE) static __always_inline void arch_exit_to_user_mode_work(struct pt_regs *regs, @@ -54,4 +61,73 @@ static inline bool arch_irqentry_exit_need_resched(void) #define arch_irqentry_exit_need_resched arch_irqentry_exit_need_resched +static __always_inline unsigned long ptrace_save_reg(struct pt_regs *regs, + enum ptrace_syscall_dir dir, + int *regno) +{ + unsigned long saved_reg; + + /* + * We have some ABI weirdness here in the way that we handle syscall + * exit stops because we indicate whether or not the stop has been + * signalled from syscall entry or syscall exit by clobbering a general + * purpose register (ip/r12 for AArch32, x7 for AArch64) in the tracee + * and restoring its old value after the stop. This means that: + * + * - Any writes by the tracer to this register during the stop are + * ignored/discarded. + * + * - The actual value of the register is not available during the stop, + * so the tracer cannot save it and restore it later. + * + * - Syscall stops behave differently to seccomp and pseudo-step traps + * (the latter do not nobble any registers). + */ + *regno = (is_compat_task() ? 12 : 7); + saved_reg = regs->regs[*regno]; + regs->regs[*regno] = dir; + + return saved_reg; +} + +static __always_inline int arch_ptrace_report_syscall_entry(struct pt_regs *regs) +{ + unsigned long saved_reg; + int regno, ret; + + saved_reg = ptrace_save_reg(regs, PTRACE_SYSCALL_ENTER, ®no); + ret = ptrace_report_syscall_entry(regs); + if (ret) + forget_syscall(regs); + regs->regs[regno] = saved_reg; + + return ret; +} + +#define arch_ptrace_report_syscall_entry arch_ptrace_report_syscall_entry + +static __always_inline void arch_ptrace_report_syscall_exit(struct pt_regs *regs, + int step) +{ + unsigned long saved_reg; + int regno; + + saved_reg = ptrace_save_reg(regs, PTRACE_SYSCALL_EXIT, ®no); + if (!step) { + ptrace_report_syscall_exit(regs, 0); + regs->regs[regno] = saved_reg; + } else { + regs->regs[regno] = saved_reg; + + /* + * Signal a pseudo-step exception since we are stepping but + * tracer modifications to the registers may have rewound the + * state machine. + */ + ptrace_report_syscall_exit(regs, 1); + } +} + +#define arch_ptrace_report_syscall_exit arch_ptrace_report_syscall_exit + #endif /* _ASM_ARM64_ENTRY_COMMON_H */ diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h index dea392c081ca..240d45735cc5 100644 --- a/arch/arm64/include/asm/syscall.h +++ b/arch/arm64/include/asm/syscall.h @@ -9,6 +9,9 @@ #include <linux/compat.h> #include <linux/err.h> +#include <asm/compat.h> +#include <asm/vdso.h> + typedef long (*syscall_fn_t)(const struct pt_regs *regs); extern const syscall_fn_t sys_call_table[]; @@ -120,7 +123,19 @@ static inline int syscall_get_arch(struct task_struct *task) return AUDIT_ARCH_AARCH64; } -int syscall_trace_enter(struct pt_regs *regs, unsigned long flags); -void syscall_exit_to_user_mode_work(struct pt_regs *regs); +static inline bool arch_syscall_is_vdso_sigreturn(struct pt_regs *regs) +{ + unsigned long sigtramp; + +#ifdef CONFIG_COMPAT + if (is_compat_task()) { + unsigned long sigpage = (unsigned long)current->mm->context.sigpage; + + return regs->pc >= sigpage && regs->pc < (sigpage + PAGE_SIZE); + } +#endif + sigtramp = (unsigned long)VDSO_SYMBOL(current->mm->context.vdso, sigtramp); + return regs->pc == (sigtramp + 8); +} #endif /* __ASM_SYSCALL_H */ diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index ef1462b9b00b..90be0c590b86 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -43,6 +43,7 @@ struct thread_info { void *scs_sp; #endif u32 cpu; + unsigned long syscall_work; /* SYSCALL_WORK_ flags */ }; #define thread_saved_pc(tsk) \ @@ -65,11 +66,6 @@ void arch_setup_new_exec(void); #define TIF_UPROBE 5 /* uprobe breakpoint or singlestep */ #define TIF_MTE_ASYNC_FAULT 6 /* MTE Asynchronous Tag Check Fault */ #define TIF_NOTIFY_SIGNAL 7 /* signal notifications exist */ -#define TIF_SYSCALL_TRACE 8 /* syscall trace active */ -#define TIF_SYSCALL_AUDIT 9 /* syscall auditing */ -#define TIF_SYSCALL_TRACEPOINT 10 /* syscall tracepoint for ftrace */ -#define TIF_SECCOMP 11 /* syscall secure computing */ -#define TIF_SYSCALL_EMU 12 /* syscall emulation active */ #define TIF_PATCH_PENDING 13 /* pending live patching update */ #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 @@ -92,27 +88,14 @@ void arch_setup_new_exec(void); #define _TIF_NEED_RESCHED_LAZY (1 << TIF_NEED_RESCHED_LAZY) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_FOREIGN_FPSTATE (1 << TIF_FOREIGN_FPSTATE) -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) #define _TIF_PATCH_PENDING (1 << TIF_PATCH_PENDING) #define _TIF_UPROBE (1 << TIF_UPROBE) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_32BIT (1 << TIF_32BIT) #define _TIF_SVE (1 << TIF_SVE) #define _TIF_MTE_ASYNC_FAULT (1 << TIF_MTE_ASYNC_FAULT) #define _TIF_NOTIFY_SIGNAL (1 << TIF_NOTIFY_SIGNAL) #define _TIF_TSC_SIGSEGV (1 << TIF_TSC_SIGSEGV) -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \ - _TIF_SYSCALL_EMU) - -#define _TIF_SYSCALL_EXIT_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SYSCALL_TRACEPOINT) - #ifdef CONFIG_SHADOW_CALL_STACK #define INIT_SCS \ .scs_base = init_shadow_call_stack, \ diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 29307642f4c9..e67643a70405 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -385,11 +385,18 @@ void user_enable_single_step(struct task_struct *task) if (!test_and_set_ti_thread_flag(ti, TIF_SINGLESTEP)) set_regs_spsr_ss(task_pt_regs(task)); + + /* + * Ensure that a trap is triggered once stepping out of a system + * call prior to executing any user instruction. + */ + set_task_syscall_work(task, SYSCALL_EXIT_TRAP); } NOKPROBE_SYMBOL(user_enable_single_step); void user_disable_single_step(struct task_struct *task) { clear_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP); + clear_task_syscall_work(task, SYSCALL_EXIT_TRAP); } NOKPROBE_SYMBOL(user_disable_single_step); diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 6e86aec8d607..f575b30b2dc4 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -8,7 +8,6 @@ * Copyright (C) 2012 ARM Ltd. */ -#include <linux/audit.h> #include <linux/compat.h> #include <linux/kernel.h> #include <linux/sched/signal.h> @@ -18,7 +17,6 @@ #include <linux/smp.h> #include <linux/ptrace.h> #include <linux/user.h> -#include <linux/seccomp.h> #include <linux/security.h> #include <linux/init.h> #include <linux/signal.h> @@ -28,7 +26,6 @@ #include <linux/hw_breakpoint.h> #include <linux/regset.h> #include <linux/elf.h> -#include <linux/rseq.h> #include <asm/compat.h> #include <asm/cpufeature.h> @@ -38,13 +35,9 @@ #include <asm/mte.h> #include <asm/pointer_auth.h> #include <asm/stacktrace.h> -#include <asm/syscall.h> #include <asm/traps.h> #include <asm/system_misc.h> -#define CREATE_TRACE_POINTS -#include <trace/events/syscalls.h> - struct pt_regs_offset { const char *name; int offset; @@ -2338,153 +2331,6 @@ long arch_ptrace(struct task_struct *child, long request, return ptrace_request(child, request, addr, data); } -enum ptrace_syscall_dir { - PTRACE_SYSCALL_ENTER = 0, - PTRACE_SYSCALL_EXIT, -}; - -static __always_inline unsigned long ptrace_save_reg(struct pt_regs *regs, - enum ptrace_syscall_dir dir, - int *regno) -{ - unsigned long saved_reg; - - /* - * We have some ABI weirdness here in the way that we handle syscall - * exit stops because we indicate whether or not the stop has been - * signalled from syscall entry or syscall exit by clobbering a general - * purpose register (ip/r12 for AArch32, x7 for AArch64) in the tracee - * and restoring its old value after the stop. This means that: - * - * - Any writes by the tracer to this register during the stop are - * ignored/discarded. - * - * - The actual value of the register is not available during the stop, - * so the tracer cannot save it and restore it later. - * - * - Syscall stops behave differently to seccomp and pseudo-step traps - * (the latter do not nobble any registers). - */ - *regno = (is_compat_task() ? 12 : 7); - saved_reg = regs->regs[*regno]; - regs->regs[*regno] = dir; - - return saved_reg; -} - -static int report_syscall_entry(struct pt_regs *regs) -{ - unsigned long saved_reg; - int regno, ret; - - saved_reg = ptrace_save_reg(regs, PTRACE_SYSCALL_ENTER, ®no); - ret = ptrace_report_syscall_entry(regs); - if (ret) - forget_syscall(regs); - regs->regs[regno] = saved_reg; - - return ret; -} - -static void report_syscall_exit(struct pt_regs *regs) -{ - unsigned long saved_reg; - int regno; - - saved_reg = ptrace_save_reg(regs, PTRACE_SYSCALL_EXIT, ®no); - if (!test_thread_flag(TIF_SINGLESTEP)) { - ptrace_report_syscall_exit(regs, 0); - regs->regs[regno] = saved_reg; - } else { - regs->regs[regno] = saved_reg; - - /* - * Signal a pseudo-step exception since we are stepping but - * tracer modifications to the registers may have rewound the - * state machine. - */ - ptrace_report_syscall_exit(regs, 1); - } -} - -static inline void syscall_enter_audit(struct pt_regs *regs, long syscall) -{ - if (unlikely(audit_context())) { - unsigned long args[6]; - - syscall_get_arguments(current, regs, args); - audit_syscall_entry(syscall, args[0], args[1], args[2], args[3]); - } -} - -int syscall_trace_enter(struct pt_regs *regs, unsigned long flags) -{ - long syscall; - int ret; - - if (flags & (_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE)) { - ret = report_syscall_entry(regs); - if (ret || (flags & _TIF_SYSCALL_EMU)) - return NO_SYSCALL; - } - - /* Do the secure computing after ptrace; failures should be fast. */ - if (flags & _TIF_SECCOMP) { - ret = __secure_computing(); - if (ret == -1) - return NO_SYSCALL; - } - - /* Either of the above might have changed the syscall number */ - syscall = syscall_get_nr(current, regs); - - if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) { - trace_sys_enter(regs, syscall); - - /* - * Probes or BPF hooks in the tracepoint may have changed the - * system call number as well. - */ - syscall = syscall_get_nr(current, regs); - } - - syscall_enter_audit(regs, syscall); - - return ret ? : syscall; -} - -static inline bool report_single_step(unsigned long flags) -{ - if (flags & _TIF_SYSCALL_EMU) - return false; - - return flags & _TIF_SINGLESTEP; -} - -static void syscall_exit_work(struct pt_regs *regs, unsigned long flags) -{ - bool step; - - audit_syscall_exit(regs); - - if (flags & _TIF_SYSCALL_TRACEPOINT) - trace_sys_exit(regs, syscall_get_return_value(current, regs)); - - step = report_single_step(flags); - if (step || flags & _TIF_SYSCALL_TRACE) - report_syscall_exit(regs); -} - -void syscall_exit_to_user_mode_work(struct pt_regs *regs) -{ - unsigned long flags = read_thread_flags(); - - rseq_syscall(regs); - - if (unlikely(flags & _TIF_SYSCALL_EXIT_WORK) || flags & _TIF_SINGLESTEP) - syscall_exit_work(regs, flags); -} - /* * SPSR_ELx bits which are always architecturally RES0 per ARM DDI 0487D.a. * We permit userspace to set SSBS (AArch64 bit 12, AArch32 bit 23) which is diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index 1110eeb21f57..d3ec1892b3c7 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -8,8 +8,8 @@ #include <linux/cache.h> #include <linux/compat.h> +#include <linux/entry-common.h> #include <linux/errno.h> -#include <linux/irq-entry-common.h> #include <linux/kernel.h> #include <linux/signal.h> #include <linux/freezer.h> diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index ec478fc37a9f..77d00a5cf0e9 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -2,6 +2,7 @@ #include <linux/compiler.h> #include <linux/context_tracking.h> +#include <linux/entry-common.h> #include <linux/errno.h> #include <linux/nospec.h> #include <linux/ptrace.h> @@ -68,6 +69,7 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno, static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, const syscall_fn_t syscall_table[]) { + unsigned long work = READ_ONCE(current_thread_info()->syscall_work); unsigned long flags = read_thread_flags(); regs->orig_x0 = regs->regs[0]; @@ -101,7 +103,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, return; } - if (unlikely(flags & _TIF_SYSCALL_WORK)) { + if (unlikely(work & SYSCALL_WORK_ENTER)) { /* * The de-facto standard way to skip a system call using ptrace * is to set the system call to -1 (NO_SYSCALL) and set x0 to a @@ -119,7 +121,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, */ if (scno == NO_SYSCALL) syscall_set_return_value(current, regs, -ENOSYS, 0); - scno = syscall_trace_enter(regs, flags); + scno = syscall_trace_enter(regs, work); if (scno == NO_SYSCALL) goto trace_exit; } -- 2.34.1
After switch arm64 to Generic Entry, the compiler no longer inlines el0_svc_common() into do_el0_svc(). So inline el0_svc_common() and it has 1% performance uplift on perf bench basic syscall on kunpeng920 as below which is based on v6.19-rc1. | Metric | W/O this patch | With this patch | Change | | ---------- | -------------- | --------------- | --------- | | Total time | 2.195 [sec] | 2.171 [sec] | ↓1.1% | | usecs/op | 0.219575 | 0.217192 | ↓1.1% | | ops/sec | 4,554,260 | 4,604,225 | ↑1.1% | Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- arch/arm64/kernel/syscall.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index 77d00a5cf0e9..6fcd97c46716 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -66,8 +66,8 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno, choose_random_kstack_offset(get_random_u16()); } -static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, - const syscall_fn_t syscall_table[]) +static __always_inline void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr, + const syscall_fn_t syscall_table[]) { unsigned long work = READ_ONCE(current_thread_info()->syscall_work); unsigned long flags = read_thread_flags(); -- 2.34.1
After switch arm64 to Generic Entry, a new hotspot syscall_exit_work() appeared because syscall_exit_work() is not inlined, so inline syscall_exit_work(). Also inline syscall_trace_enter() to align with syscall_exit_work(). On v6.19-rc1 with audit on, inline both syscall_trace_enter() and syscall_exit_work() has 4% performance uplift on perf bench basic syscall on kunpeng920 as below: | Metric | W/O this patch | With this patch | Change | | ---------- | -------------- | --------------- | ------ | | Total time | 2.353 [sec] | 2.264 [sec] | ↓3.8% | | usecs/op | 0.235374 | 0.226472 | ↓3.8% | | ops/sec | 4,248,588 | 4,415,554 | ↑3.9% | Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- include/linux/entry-common.h | 101 ++++++++++++++++++++++++++- kernel/entry/common.h | 7 -- kernel/entry/syscall-common.c | 95 ++----------------------- kernel/entry/syscall_user_dispatch.c | 4 +- 4 files changed, 105 insertions(+), 102 deletions(-) delete mode 100644 kernel/entry/common.h diff --git a/include/linux/entry-common.h b/include/linux/entry-common.h index 48bdde74a3e1..c2d772c70b7c 100644 --- a/include/linux/entry-common.h +++ b/include/linux/entry-common.h @@ -2,6 +2,7 @@ #ifndef __LINUX_ENTRYCOMMON_H #define __LINUX_ENTRYCOMMON_H +#include <linux/audit.h> #include <linux/irq-entry-common.h> #include <linux/livepatch.h> #include <linux/ptrace.h> @@ -64,7 +65,63 @@ static __always_inline int arch_ptrace_report_syscall_entry(struct pt_regs *regs } #endif -long syscall_trace_enter(struct pt_regs *regs, unsigned long work); +static inline void syscall_enter_audit(struct pt_regs *regs, long syscall) +{ + if (unlikely(audit_context())) { + unsigned long args[6]; + + syscall_get_arguments(current, regs, args); + audit_syscall_entry(syscall, args[0], args[1], args[2], args[3]); + } +} + +void __trace_sys_enter(struct pt_regs *regs, long syscall); +bool syscall_user_dispatch(struct pt_regs *regs); + +static __always_inline long syscall_trace_enter(struct pt_regs *regs, unsigned long work) +{ + long syscall, ret = 0; + + /* + * Handle Syscall User Dispatch. This must comes first, since + * the ABI here can be something that doesn't make sense for + * other syscall_work features. + */ + if (work & SYSCALL_WORK_SYSCALL_USER_DISPATCH) { + if (syscall_user_dispatch(regs)) + return -1L; + } + + /* Handle ptrace */ + if (work & (SYSCALL_WORK_SYSCALL_TRACE | SYSCALL_WORK_SYSCALL_EMU)) { + ret = arch_ptrace_report_syscall_entry(regs); + if (ret || (work & SYSCALL_WORK_SYSCALL_EMU)) + return -1L; + } + + /* Do seccomp after ptrace, to catch any tracer changes. */ + if (work & SYSCALL_WORK_SECCOMP) { + ret = __secure_computing(); + if (ret == -1L) + return ret; + } + + /* Either of the above might have changed the syscall number */ + syscall = syscall_get_nr(current, regs); + + if (unlikely(work & SYSCALL_WORK_SYSCALL_TRACEPOINT)) { + __trace_sys_enter(regs, syscall); + /* + * Probes or BPF hooks in the tracepoint may have changed the + * system call number as well. + */ + syscall = syscall_get_nr(current, regs); + } + + syscall_enter_audit(regs, syscall); + + return ret ? : syscall; +} /** * syscall_enter_from_user_mode_work - Check and handle work before invoking @@ -131,6 +188,19 @@ static __always_inline long syscall_enter_from_user_mode(struct pt_regs *regs, l return ret; } +/* + * If SYSCALL_EMU is set, then the only reason to report is when + * SINGLESTEP is set (i.e. PTRACE_SYSEMU_SINGLESTEP). This syscall + * instruction has been already reported in syscall_enter_from_user_mode(). + */ +static __always_inline bool report_single_step(unsigned long work) +{ + if (work & SYSCALL_WORK_SYSCALL_EMU) + return false; + + return work & SYSCALL_WORK_SYSCALL_EXIT_TRAP; +} + /** * arch_ptrace_report_syscall_exit - Architecture specific * ptrace_report_syscall_exit. @@ -151,6 +221,8 @@ static __always_inline void arch_ptrace_report_syscall_exit(struct pt_regs *regs } #endif +void __trace_sys_exit(struct pt_regs *regs, long ret); + /** * syscall_exit_work - Handle work before returning to user mode * @regs: Pointer to current pt_regs @@ -158,7 +230,32 @@ static __always_inline void arch_ptrace_report_syscall_exit(struct pt_regs *regs * * Do one-time syscall specific work. */ -void syscall_exit_work(struct pt_regs *regs, unsigned long work); +static __always_inline void syscall_exit_work(struct pt_regs *regs, unsigned long work) +{ + bool step; + + /* + * If the syscall was rolled back due to syscall user dispatching, + * then the tracers below are not invoked for the same reason as + * the entry side was not invoked in syscall_trace_enter(): The ABI + * of these syscalls is unknown. + */ + if (work & SYSCALL_WORK_SYSCALL_USER_DISPATCH) { + if (unlikely(current->syscall_dispatch.on_dispatch)) { + current->syscall_dispatch.on_dispatch = false; + return; + } + } + + audit_syscall_exit(regs); + + if (work & SYSCALL_WORK_SYSCALL_TRACEPOINT) + __trace_sys_exit(regs, syscall_get_return_value(current, regs)); + + step = report_single_step(work); + if (step || work & SYSCALL_WORK_SYSCALL_TRACE) + arch_ptrace_report_syscall_exit(regs, step); +} /** * syscall_exit_to_user_mode_work - Handle work before returning to user mode diff --git a/kernel/entry/common.h b/kernel/entry/common.h deleted file mode 100644 index f6e6d02f07fe..000000000000 --- a/kernel/entry/common.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _COMMON_H -#define _COMMON_H - -bool syscall_user_dispatch(struct pt_regs *regs); - -#endif diff --git a/kernel/entry/syscall-common.c b/kernel/entry/syscall-common.c index bb5f61f5629d..10231d30405e 100644 --- a/kernel/entry/syscall-common.c +++ b/kernel/entry/syscall-common.c @@ -1,103 +1,16 @@ // SPDX-License-Identifier: GPL-2.0 -#include <linux/audit.h> #include <linux/entry-common.h> -#include "common.h" #define CREATE_TRACE_POINTS #include <trace/events/syscalls.h> -static inline void syscall_enter_audit(struct pt_regs *regs, long syscall) +void __trace_sys_enter(struct pt_regs *regs, long syscall) { - if (unlikely(audit_context())) { - unsigned long args[6]; - - syscall_get_arguments(current, regs, args); - audit_syscall_entry(syscall, args[0], args[1], args[2], args[3]); - } + trace_sys_enter(regs, syscall); } -long syscall_trace_enter(struct pt_regs *regs, unsigned long work) +void __trace_sys_exit(struct pt_regs *regs, long ret) { - long syscall, ret = 0; - - /* - * Handle Syscall User Dispatch. This must comes first, since - * the ABI here can be something that doesn't make sense for - * other syscall_work features. - */ - if (work & SYSCALL_WORK_SYSCALL_USER_DISPATCH) { - if (syscall_user_dispatch(regs)) - return -1L; - } - - /* Handle ptrace */ - if (work & (SYSCALL_WORK_SYSCALL_TRACE | SYSCALL_WORK_SYSCALL_EMU)) { - ret = arch_ptrace_report_syscall_entry(regs); - if (ret || (work & SYSCALL_WORK_SYSCALL_EMU)) - return -1L; - } - - /* Do seccomp after ptrace, to catch any tracer changes. */ - if (work & SYSCALL_WORK_SECCOMP) { - ret = __secure_computing(); - if (ret == -1L) - return ret; - } - - /* Either of the above might have changed the syscall number */ - syscall = syscall_get_nr(current, regs); - - if (unlikely(work & SYSCALL_WORK_SYSCALL_TRACEPOINT)) { - trace_sys_enter(regs, syscall); - /* - * Probes or BPF hooks in the tracepoint may have changed the - * system call number as well. - */ - syscall = syscall_get_nr(current, regs); - } - - syscall_enter_audit(regs, syscall); - - return ret ? : syscall; -} - -/* - * If SYSCALL_EMU is set, then the only reason to report is when - * SINGLESTEP is set (i.e. PTRACE_SYSEMU_SINGLESTEP). This syscall - * instruction has been already reported in syscall_enter_from_user_mode(). - */ -static inline bool report_single_step(unsigned long work) -{ - if (work & SYSCALL_WORK_SYSCALL_EMU) - return false; - - return work & SYSCALL_WORK_SYSCALL_EXIT_TRAP; -} - -void syscall_exit_work(struct pt_regs *regs, unsigned long work) -{ - bool step; - - /* - * If the syscall was rolled back due to syscall user dispatching, - * then the tracers below are not invoked for the same reason as - * the entry side was not invoked in syscall_trace_enter(): The ABI - * of these syscalls is unknown. - */ - if (work & SYSCALL_WORK_SYSCALL_USER_DISPATCH) { - if (unlikely(current->syscall_dispatch.on_dispatch)) { - current->syscall_dispatch.on_dispatch = false; - return; - } - } - - audit_syscall_exit(regs); - - if (work & SYSCALL_WORK_SYSCALL_TRACEPOINT) - trace_sys_exit(regs, syscall_get_return_value(current, regs)); - - step = report_single_step(work); - if (step || work & SYSCALL_WORK_SYSCALL_TRACE) - arch_ptrace_report_syscall_exit(regs, step); + trace_sys_exit(regs, ret); } diff --git a/kernel/entry/syscall_user_dispatch.c b/kernel/entry/syscall_user_dispatch.c index a9055eccb27e..d89dffcc2d64 100644 --- a/kernel/entry/syscall_user_dispatch.c +++ b/kernel/entry/syscall_user_dispatch.c @@ -2,6 +2,8 @@ /* * Copyright (C) 2020 Collabora Ltd. */ + +#include <linux/entry-common.h> #include <linux/sched.h> #include <linux/prctl.h> #include <linux/ptrace.h> @@ -15,8 +17,6 @@ #include <asm/syscall.h> -#include "common.h" - static void trigger_sigsys(struct pt_regs *regs) { struct kernel_siginfo info; -- 2.34.1
From: kemal <kmal@cock.li> Support aarch64 to test "Syscall User Dispatch" with sud_test selftest testcase. Signed-off-by: kemal <kmal@cock.li> --- tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c | 2 +- tools/testing/selftests/syscall_user_dispatch/sud_test.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c b/tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c index 073a03702ff5..6059abe75cb3 100644 --- a/tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c +++ b/tools/testing/selftests/syscall_user_dispatch/sud_benchmark.c @@ -41,7 +41,7 @@ * out of the box, but don't enable them until they support syscall user * dispatch. */ -#if defined(__x86_64__) || defined(__i386__) +#if defined(__x86_64__) || defined(__i386__) || defined(__aarch64__) #define TEST_BLOCKED_RETURN #endif diff --git a/tools/testing/selftests/syscall_user_dispatch/sud_test.c b/tools/testing/selftests/syscall_user_dispatch/sud_test.c index b855c6000287..3ffea2f4a66d 100644 --- a/tools/testing/selftests/syscall_user_dispatch/sud_test.c +++ b/tools/testing/selftests/syscall_user_dispatch/sud_test.c @@ -192,6 +192,10 @@ static void handle_sigsys(int sig, siginfo_t *info, void *ucontext) ((ucontext_t *)ucontext)->uc_mcontext.__gregs[REG_A0] = ((ucontext_t *)ucontext)->uc_mcontext.__gregs[REG_A7]; #endif +#ifdef __aarch64__ + ((ucontext_t *)ucontext)->uc_mcontext.regs[0] = (unsigned int) + ((ucontext_t *)ucontext)->uc_mcontext.regs[8]; +#endif } int setup_sigsys_handler(void) -- 2.34.1
participants (1)
-
Jinjie Ruan