[PATCH OLK-6.6 0/3] Some patches of Net are incorporated into olk-6.6 as follows:
From: Xinghai Cen <cenxinghai@h-partners.com> Some patches of Net are incorporated into olk-6.6 as follows: Jian Shen (2): net: hns3: don't auto enable misc vector net: hns3: initialize reset_timer before hclgevf_misc_irq_init() Jie Wang (1): net: hns3: fix kernel crash when 1588 is sent on HIP08 devices .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 11 +++++++---- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c | 3 +++ .../net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 2 +- 3 files changed, 11 insertions(+), 5 deletions(-) -- 2.33.0
From: Jian Shen <shenjian15@huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAP2LZ ---------------------------------------------------------------------- Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq. Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Xinghai Cen <cenxinghai@h-partners.com> --- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 52b7abc0e23c..96f2e7b7b8ad 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -6,6 +6,7 @@ #include <linux/etherdevice.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/netdevice.h> @@ -3828,6 +3829,7 @@ static int hclge_misc_irq_init(struct hclge_dev *hdev) /* this would be explicitly freed in the end */ snprintf(hdev->misc_vector.name, HNAE3_INT_NAME_LEN, "%s-misc-%s", HCLGE_NAME, pci_name(hdev->pdev)); + irq_set_status_flags(hdev->misc_vector.vector_irq, IRQ_NOAUTOEN); ret = request_irq(hdev->misc_vector.vector_irq, hclge_misc_irq_handle, 0, hdev->misc_vector.name, hdev); if (ret) { @@ -12585,9 +12587,6 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) hclge_init_rxd_adv_layout(hdev); - /* Enable MISC vector(vector0) */ - hclge_enable_vector(&hdev->misc_vector, true); - ret = hclge_init_wol(hdev); if (ret) dev_warn(&pdev->dev, @@ -12600,6 +12599,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev) hclge_state_init(hdev); hdev->last_reset_time = jiffies; + /* Enable MISC vector(vector0) */ + enable_irq(hdev->misc_vector.vector_irq); + hclge_enable_vector(&hdev->misc_vector, true); + dev_info(&hdev->pdev->dev, "%s driver initialization finished.\n", HCLGE_DRIVER_NAME); @@ -13007,7 +13010,7 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev) /* Disable MISC vector(vector0) */ hclge_enable_vector(&hdev->misc_vector, false); - synchronize_irq(hdev->misc_vector.vector_irq); + disable_irq(hdev->misc_vector.vector_irq); /* Disable all hw interrupts */ hclge_config_mac_tnl_int(hdev, false); -- 2.33.0
From: Jian Shen <shenjian15@huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAP2LZ ---------------------------------------------------------------------- Currently the misc irq is initialized before reset_timer setup. But it will access the reset_timer in the irq handler. So initialize the reset_timer earlier. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Xinghai Cen <cenxinghai@h-partners.com> --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 19176959f647..fc4b92891e6b 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2359,6 +2359,7 @@ static void hclgevf_state_init(struct hclgevf_dev *hdev) clear_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state); INIT_DELAYED_WORK(&hdev->service_task, hclgevf_service_task); + timer_setup(&hdev->reset_timer, hclgevf_reset_timer, 0); mutex_init(&hdev->mbx_resp.mbx_mutex); sema_init(&hdev->reset_sem, 1); @@ -3063,7 +3064,6 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev) HCLGEVF_DRIVER_NAME); hclgevf_task_schedule(hdev, round_jiffies_relative(HZ)); - timer_setup(&hdev->reset_timer, hclgevf_reset_timer, 0); return 0; -- 2.33.0
From: Jie Wang <wangjie125@huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAP2LZ ---------------------------------------------------------------------- Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Xinghai Cen <cenxinghai@h-partners.com> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c index 507d7ce26d83..0ddf102c76f7 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c @@ -58,6 +58,9 @@ bool hclge_ptp_set_tx_info(struct hnae3_handle *handle, struct sk_buff *skb) struct hclge_dev *hdev = vport->back; struct hclge_ptp *ptp = hdev->ptp; + if (!ptp) + return false; + if (!test_bit(HCLGE_PTP_FLAG_TX_EN, &ptp->flags) || test_and_set_bit(HCLGE_STATE_PTP_TX_HANDLING, &hdev->state)) { ptp->tx_skipped++; -- 2.33.0
反馈： 您发送到kernel@openeuler.org的补丁/补丁集，已成功转换为PR！ PR链接地址： https://gitee.com/openeuler/kernel/pulls/11448 邮件列表地址：https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/K... FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/11448 Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/K...
participants (2)
-
Jijie Shao -
patchwork bot