[PATCH openEuler-5.10-LTS-SP1 001/263] KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs
From: Nicholas Piggin <npiggin@gmail.com> stable inclusion from stable-v5.10.145 commit 6bae47548188ae957578e6d92d4b8753dec435e4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 112665286d08c87e66d699e7cba43c1497ad165f ] Interrupts that occur in kernel mode expect that context tracking is set to kernel. Enabling local irqs before context tracking switches from guest to host means interrupts can come in and trigger warnings about wrong context, and possibly worse. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210130130852.2952424-3-npiggin@gmail.com Stable-dep-of: 235cee162459 ("KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/powerpc/kvm/book3s_hv.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 38b7a3491aac..d6c4e27f7ed9 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -3399,8 +3399,9 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) kvmppc_set_host_core(pcpu); + guest_exit_irqoff(); + local_irq_enable(); - guest_exit(); /* Let secondaries go back to the offline loop */ for (i = 0; i < controlled_threads; ++i) { @@ -4235,8 +4236,9 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit, kvmppc_set_host_core(pcpu); + guest_exit_irqoff(); + local_irq_enable(); - guest_exit(); cpumask_clear_cpu(pcpu, &kvm->arch.cpu_in_guest); -- 2.25.1
From: Laurent Vivier <lvivier@redhat.com> stable inclusion from stable-v5.10.145 commit 9230af9188a2cc8872fb98ea50907f3440a1786a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 235cee162459d96153d63651ce7ff51752528c96 ] Commit 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") moved guest_exit() into the interrupt protected area to avoid wrong context warning (or worse). The problem is that tick-based time accounting has not yet been updated at this point (because it depends on the timer interrupt firing), so the guest time gets incorrectly accounted to system time. To fix the problem, follow the x86 fix in commit 160457140187 ("Defer vtime accounting 'til after IRQ handling"), and allow host IRQs to run before accounting the guest exit time. In the case vtime accounting is enabled, this is not required because TB is used directly for accounting. Before this patch, with CONFIG_TICK_CPU_ACCOUNTING=y in the host and a guest running a kernel compile, the 'guest' fields of /proc/stat are stuck at zero. With the patch they can be observed increasing roughly as expected. Fixes: e233d54d4d97 ("KVM: booke: use __kvm_guest_exit") Fixes: 112665286d08 ("KVM: PPC: Book3S HV: Context tracking exit guest context before enabling irqs") Cc: stable@vger.kernel.org # 5.12+ Signed-off-by: Laurent Vivier <lvivier@redhat.com> [np: only required for tick accounting, add Book3E fix, tweak changelog] Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211027142150.3711582-1-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/powerpc/kvm/book3s_hv.c | 30 ++++++++++++++++++++++++++++-- arch/powerpc/kvm/booke.c | 16 +++++++++++++++- 2 files changed, 43 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index d6c4e27f7ed9..1d2593238995 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -3399,7 +3399,20 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) kvmppc_set_host_core(pcpu); - guest_exit_irqoff(); + context_tracking_guest_exit(); + if (!vtime_accounting_enabled_this_cpu()) { + local_irq_enable(); + /* + * Service IRQs here before vtime_account_guest_exit() so any + * ticks that occurred while running the guest are accounted to + * the guest. If vtime accounting is enabled, accounting uses + * TB rather than ticks, so it can be done without enabling + * interrupts here, which has the problem that it accounts + * interrupt processing overhead to the host. + */ + local_irq_disable(); + } + vtime_account_guest_exit(); local_irq_enable(); @@ -4236,7 +4249,20 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit, kvmppc_set_host_core(pcpu); - guest_exit_irqoff(); + context_tracking_guest_exit(); + if (!vtime_accounting_enabled_this_cpu()) { + local_irq_enable(); + /* + * Service IRQs here before vtime_account_guest_exit() so any + * ticks that occurred while running the guest are accounted to + * the guest. If vtime accounting is enabled, accounting uses + * TB rather than ticks, so it can be done without enabling + * interrupts here, which has the problem that it accounts + * interrupt processing overhead to the host. + */ + local_irq_disable(); + } + vtime_account_guest_exit(); local_irq_enable(); diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index b1abcb816439..75381beb7514 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -1016,7 +1016,21 @@ int kvmppc_handle_exit(struct kvm_vcpu *vcpu, unsigned int exit_nr) } trace_kvm_exit(exit_nr, vcpu); - guest_exit_irqoff(); + + context_tracking_guest_exit(); + if (!vtime_accounting_enabled_this_cpu()) { + local_irq_enable(); + /* + * Service IRQs here before vtime_account_guest_exit() so any + * ticks that occurred while running the guest are accounted to + * the guest. If vtime accounting is enabled, accounting uses + * TB rather than ticks, so it can be done without enabling + * interrupts here, which has the problem that it accounts + * interrupt processing overhead to the host. + */ + local_irq_disable(); + } + vtime_account_guest_exit(); local_irq_enable(); -- 2.25.1
From: Pali Rohár <pali@kernel.org> stable inclusion from stable-v5.10.145 commit 59819f0aafd089cfbf8c087895f8c541af67392e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 32262e2e429cdb31f9e957e997d53458762931b7 ] In most cases it is not possible to set exact baudrate value to hardware. So fix reporting real baudrate value which was set to hardware via c_ospeed termios field. It can be retrieved by ioctl(TCGETS2) from userspace. Real baudrate value is calculated from chosen hardware divisor and base clock. It is implemented in a new function serial8250_compute_baud_rate() which is inverse of serial8250_get_divisor() function. With this change is fixed also UART timeout value (it is updated via uart_update_timeout() function), which is calculated from the now fixed baudrate value too. Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210927093704.19768-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/serial/8250/8250_port.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 9d60418e4adb..eaf4eb33a78d 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2547,6 +2547,19 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, return serial8250_do_get_divisor(port, baud, frac); } +static unsigned int serial8250_compute_baud_rate(struct uart_port *port, + unsigned int quot) +{ + if ((port->flags & UPF_MAGIC_MULTIPLIER) && quot == 0x8001) + return port->uartclk / 4; + else if ((port->flags & UPF_MAGIC_MULTIPLIER) && quot == 0x8002) + return port->uartclk / 8; + else if (port->type == PORT_NPCM) + return DIV_ROUND_CLOSEST(port->uartclk - 2 * (quot + 2), 16 * (quot + 2)); + else + return DIV_ROUND_CLOSEST(port->uartclk, 16 * quot); +} + static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, tcflag_t c_cflag) { @@ -2688,11 +2701,14 @@ void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) baud = serial8250_get_baud_rate(port, termios, NULL); quot = serial8250_get_divisor(port, baud, &frac); + baud = serial8250_compute_baud_rate(port, quot); serial8250_rpm_get(up); spin_lock_irqsave(&port->lock, flags); uart_update_timeout(port, termios->c_cflag, baud); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); serial8250_set_divisor(port, baud, quot, frac); serial_port_out(port, UART_LCR, up->lcr); @@ -2726,6 +2742,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, baud = serial8250_get_baud_rate(port, termios, old); quot = serial8250_get_divisor(port, baud, &frac); + baud = serial8250_compute_baud_rate(port, quot); /* * Ok, we're now changing the port state. Do it with -- 2.25.1
From: Helge Deller <deller@gmx.de> stable inclusion from stable-v5.10.145 commit b00a56e64713cf3e8f5ca00a943140b294c5f24e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit b7795074a04669d0a023babf786d29bf67c68783 ] On parisc a spinlock is stored in the next page behind the pgd which protects against parallel accesses to the pgd. That's why one additional page (PGD_ALLOC_ORDER) is allocated for the pgd. Matthew Wilcox suggested that we instead should use a pointer in the struct page table for this spinlock and noted, that the comments for the PGD_ORDER and PMD_ORDER defines were wrong. Both suggestions are addressed with this patch. Instead of having an own spinlock to protect the pgd, we now switch to use the existing page_table_lock. Additionally, beside loading the pgd into cr25 in switch_mm_irqs_off(), the physical address of this lock is loaded into cr28 (tr4), so that we can avoid implementing a complicated lookup in assembly for this lock in the TLB fault handlers. The existing Hybrid L2/L3 page table scheme (where the pmd is adjacent to the pgd) has been dropped with this patch. Remove the locking in set_pte() and the huge-page pte functions too. They trigger a spinlock recursion on 32bit machines and seem unnecessary. Suggested-by: Matthew Wilcox <willy@infradead.org> Fixes: b37d1c1898b2 ("parisc: Use per-pagetable spinlock") Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Stable-dep-of: 38860b2c8bb1 ("parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/parisc/Kconfig | 10 +++ arch/parisc/include/asm/mmu_context.h | 7 ++ arch/parisc/include/asm/page.h | 2 +- arch/parisc/include/asm/pgalloc.h | 76 ++++------------- arch/parisc/include/asm/pgtable.h | 89 ++++---------------- arch/parisc/kernel/asm-offsets.c | 1 - arch/parisc/kernel/entry.S | 116 +++++++++++--------------- arch/parisc/mm/hugetlbpage.c | 13 --- arch/parisc/mm/init.c | 10 +-- 9 files changed, 110 insertions(+), 214 deletions(-) diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 2d89f79f460c..07a4d4badd69 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -315,6 +315,16 @@ config IRQSTACKS for handling hard and soft interrupts. This can help avoid overflowing the process kernel stacks. +config TLB_PTLOCK + bool "Use page table locks in TLB fault handler" + depends on SMP + default n + help + Select this option to enable page table locking in the TLB + fault handler. This ensures that page table entries are + updated consistently on SMP machines at the expense of some + loss in performance. + config HOTPLUG_CPU bool default y if SMP diff --git a/arch/parisc/include/asm/mmu_context.h b/arch/parisc/include/asm/mmu_context.h index cb5f2f730421..aba69ff79e8c 100644 --- a/arch/parisc/include/asm/mmu_context.h +++ b/arch/parisc/include/asm/mmu_context.h @@ -5,6 +5,7 @@ #include <linux/mm.h> #include <linux/sched.h> #include <linux/atomic.h> +#include <linux/spinlock.h> #include <asm-generic/mm_hooks.h> static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) @@ -52,6 +53,12 @@ static inline void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { if (prev != next) { +#ifdef CONFIG_TLB_PTLOCK + /* put physical address of page_table_lock in cr28 (tr4) + for TLB faults */ + spinlock_t *pgd_lock = &next->page_table_lock; + mtctl(__pa(__ldcw_align(&pgd_lock->rlock.raw_lock)), 28); +#endif mtctl(__pa(next->pgd), 25); load_context(next->context); } diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h index 8802ce651a3a..0561568f7b48 100644 --- a/arch/parisc/include/asm/page.h +++ b/arch/parisc/include/asm/page.h @@ -112,7 +112,7 @@ extern int npmem_ranges; #else #define BITS_PER_PTE_ENTRY 2 #define BITS_PER_PMD_ENTRY 2 -#define BITS_PER_PGD_ENTRY BITS_PER_PMD_ENTRY +#define BITS_PER_PGD_ENTRY 2 #endif #define PGD_ENTRY_SIZE (1UL << BITS_PER_PGD_ENTRY) #define PMD_ENTRY_SIZE (1UL << BITS_PER_PMD_ENTRY) diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h index a6482b2ce0ea..dda557085311 100644 --- a/arch/parisc/include/asm/pgalloc.h +++ b/arch/parisc/include/asm/pgalloc.h @@ -15,47 +15,23 @@ #define __HAVE_ARCH_PGD_FREE #include <asm-generic/pgalloc.h> -/* Allocate the top level pgd (page directory) - * - * Here (for 64 bit kernels) we implement a Hybrid L2/L3 scheme: we - * allocate the first pmd adjacent to the pgd. This means that we can - * subtract a constant offset to get to it. The pmd and pgd sizes are - * arranged so that a single pmd covers 4GB (giving a full 64-bit - * process access to 8TB) so our lookups are effectively L2 for the - * first 4GB of the kernel (i.e. for all ILP32 processes and all the - * kernel for machines with under 4GB of memory) */ +/* Allocate the top level pgd (page directory) */ static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - pgd_t *pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, - PGD_ALLOC_ORDER); - pgd_t *actual_pgd = pgd; + pgd_t *pgd; - if (likely(pgd != NULL)) { - memset(pgd, 0, PAGE_SIZE<<PGD_ALLOC_ORDER); -#if CONFIG_PGTABLE_LEVELS == 3 - actual_pgd += PTRS_PER_PGD; - /* Populate first pmd with allocated memory. We mark it - * with PxD_FLAG_ATTACHED as a signal to the system that this - * pmd entry may not be cleared. */ - set_pgd(actual_pgd, __pgd((PxD_FLAG_PRESENT | - PxD_FLAG_VALID | - PxD_FLAG_ATTACHED) - + (__u32)(__pa((unsigned long)pgd) >> PxD_VALUE_SHIFT))); - /* The first pmd entry also is marked with PxD_FLAG_ATTACHED as - * a signal that this pmd may not be freed */ - set_pgd(pgd, __pgd(PxD_FLAG_ATTACHED)); -#endif - } - spin_lock_init(pgd_spinlock(actual_pgd)); - return actual_pgd; + pgd = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER); + if (unlikely(pgd == NULL)) + return NULL; + + memset(pgd, 0, PAGE_SIZE << PGD_ORDER); + + return pgd; } static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) { -#if CONFIG_PGTABLE_LEVELS == 3 - pgd -= PTRS_PER_PGD; -#endif - free_pages((unsigned long)pgd, PGD_ALLOC_ORDER); + free_pages((unsigned long)pgd, PGD_ORDER); } #if CONFIG_PGTABLE_LEVELS == 3 @@ -70,41 +46,25 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) { - return (pmd_t *)__get_free_pages(GFP_PGTABLE_KERNEL, PMD_ORDER); + pmd_t *pmd; + + pmd = (pmd_t *)__get_free_pages(GFP_PGTABLE_KERNEL, PMD_ORDER); + if (likely(pmd)) + memset ((void *)pmd, 0, PAGE_SIZE << PMD_ORDER); + return pmd; } static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) { - if (pmd_flag(*pmd) & PxD_FLAG_ATTACHED) { - /* - * This is the permanent pmd attached to the pgd; - * cannot free it. - * Increment the counter to compensate for the decrement - * done by generic mm code. - */ - mm_inc_nr_pmds(mm); - return; - } free_pages((unsigned long)pmd, PMD_ORDER); } - #endif static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) { -#if CONFIG_PGTABLE_LEVELS == 3 - /* preserve the gateway marker if this is the beginning of - * the permanent pmd */ - if(pmd_flag(*pmd) & PxD_FLAG_ATTACHED) - set_pmd(pmd, __pmd((PxD_FLAG_PRESENT | - PxD_FLAG_VALID | - PxD_FLAG_ATTACHED) - + (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT))); - else -#endif - set_pmd(pmd, __pmd((PxD_FLAG_PRESENT | PxD_FLAG_VALID) - + (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT))); + set_pmd(pmd, __pmd((PxD_FLAG_PRESENT | PxD_FLAG_VALID) + + (__u32)(__pa((unsigned long)pte) >> PxD_VALUE_SHIFT))); } #define pmd_populate(mm, pmd, pte_page) \ diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h index 0b6307b12c4f..7218345a447f 100644 --- a/arch/parisc/include/asm/pgtable.h +++ b/arch/parisc/include/asm/pgtable.h @@ -23,8 +23,6 @@ #include <asm/processor.h> #include <asm/cache.h> -static inline spinlock_t *pgd_spinlock(pgd_t *); - /* * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel * memory. For the return value to be meaningful, ADDR must be >= @@ -42,12 +40,8 @@ static inline spinlock_t *pgd_spinlock(pgd_t *); /* This is for the serialization of PxTLB broadcasts. At least on the N class * systems, only one PxTLB inter processor broadcast can be active at any one - * time on the Merced bus. - - * PTE updates are protected by locks in the PMD. - */ + * time on the Merced bus. */ extern spinlock_t pa_tlb_flush_lock; -extern spinlock_t pa_swapper_pg_lock; #if defined(CONFIG_64BIT) && defined(CONFIG_SMP) extern int pa_serialize_tlb_flushes; #else @@ -86,18 +80,16 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr) * within a page table are directly modified. Thus, the following * hook is made available. */ -#define set_pte(pteptr, pteval) \ - do{ \ - *(pteptr) = (pteval); \ - } while(0) - -#define set_pte_at(mm, addr, ptep, pteval) \ - do { \ - unsigned long flags; \ - spin_lock_irqsave(pgd_spinlock((mm)->pgd), flags);\ - set_pte(ptep, pteval); \ - purge_tlb_entries(mm, addr); \ - spin_unlock_irqrestore(pgd_spinlock((mm)->pgd), flags);\ +#define set_pte(pteptr, pteval) \ + do { \ + *(pteptr) = (pteval); \ + barrier(); \ + } while(0) + +#define set_pte_at(mm, addr, pteptr, pteval) \ + do { \ + *(pteptr) = (pteval); \ + purge_tlb_entries(mm, addr); \ } while (0) #endif /* !__ASSEMBLY__ */ @@ -120,12 +112,10 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr) #define KERNEL_INITIAL_SIZE (1 << KERNEL_INITIAL_ORDER) #if CONFIG_PGTABLE_LEVELS == 3 -#define PGD_ORDER 1 /* Number of pages per pgd */ -#define PMD_ORDER 1 /* Number of pages per pmd */ -#define PGD_ALLOC_ORDER (2 + 1) /* first pgd contains pmd */ +#define PMD_ORDER 1 +#define PGD_ORDER 0 #else -#define PGD_ORDER 1 /* Number of pages per pgd */ -#define PGD_ALLOC_ORDER (PGD_ORDER + 1) +#define PGD_ORDER 1 #endif /* Definitions for 3rd level (we use PLD here for Page Lower directory @@ -240,11 +230,9 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr) * able to effectively address 40/42/44-bits of physical address space * depending on 4k/16k/64k PAGE_SIZE */ #define _PxD_PRESENT_BIT 31 -#define _PxD_ATTACHED_BIT 30 -#define _PxD_VALID_BIT 29 +#define _PxD_VALID_BIT 30 #define PxD_FLAG_PRESENT (1 << xlate_pabit(_PxD_PRESENT_BIT)) -#define PxD_FLAG_ATTACHED (1 << xlate_pabit(_PxD_ATTACHED_BIT)) #define PxD_FLAG_VALID (1 << xlate_pabit(_PxD_VALID_BIT)) #define PxD_FLAG_MASK (0xf) #define PxD_FLAG_SHIFT (4) @@ -326,23 +314,10 @@ extern unsigned long *empty_zero_page; #define pgd_flag(x) (pgd_val(x) & PxD_FLAG_MASK) #define pgd_address(x) ((unsigned long)(pgd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT) -#if CONFIG_PGTABLE_LEVELS == 3 -/* The first entry of the permanent pmd is not there if it contains - * the gateway marker */ -#define pmd_none(x) (!pmd_val(x) || pmd_flag(x) == PxD_FLAG_ATTACHED) -#else #define pmd_none(x) (!pmd_val(x)) -#endif #define pmd_bad(x) (!(pmd_flag(x) & PxD_FLAG_VALID)) #define pmd_present(x) (pmd_flag(x) & PxD_FLAG_PRESENT) static inline void pmd_clear(pmd_t *pmd) { -#if CONFIG_PGTABLE_LEVELS == 3 - if (pmd_flag(*pmd) & PxD_FLAG_ATTACHED) - /* This is the entry pointing to the permanent pmd - * attached to the pgd; cannot clear it */ - set_pmd(pmd, __pmd(PxD_FLAG_ATTACHED)); - else -#endif set_pmd(pmd, __pmd(0)); } @@ -358,12 +333,6 @@ static inline void pmd_clear(pmd_t *pmd) { #define pud_bad(x) (!(pud_flag(x) & PxD_FLAG_VALID)) #define pud_present(x) (pud_flag(x) & PxD_FLAG_PRESENT) static inline void pud_clear(pud_t *pud) { -#if CONFIG_PGTABLE_LEVELS == 3 - if(pud_flag(*pud) & PxD_FLAG_ATTACHED) - /* This is the permanent pmd attached to the pud; cannot - * free it */ - return; -#endif set_pud(pud, __pud(0)); } #endif @@ -456,32 +425,18 @@ extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *); #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -static inline spinlock_t *pgd_spinlock(pgd_t *pgd) -{ - if (unlikely(pgd == swapper_pg_dir)) - return &pa_swapper_pg_lock; - return (spinlock_t *)((char *)pgd + (PAGE_SIZE << (PGD_ALLOC_ORDER - 1))); -} - - static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { pte_t pte; - unsigned long flags; if (!pte_young(*ptep)) return 0; - spin_lock_irqsave(pgd_spinlock(vma->vm_mm->pgd), flags); pte = *ptep; if (!pte_young(pte)) { - spin_unlock_irqrestore(pgd_spinlock(vma->vm_mm->pgd), flags); return 0; } - set_pte(ptep, pte_mkold(pte)); - purge_tlb_entries(vma->vm_mm, addr); - spin_unlock_irqrestore(pgd_spinlock(vma->vm_mm->pgd), flags); + set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte)); return 1; } @@ -489,24 +444,16 @@ struct mm_struct; static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t old_pte; - unsigned long flags; - spin_lock_irqsave(pgd_spinlock(mm->pgd), flags); old_pte = *ptep; - set_pte(ptep, __pte(0)); - purge_tlb_entries(mm, addr); - spin_unlock_irqrestore(pgd_spinlock(mm->pgd), flags); + set_pte_at(mm, addr, ptep, __pte(0)); return old_pte; } static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - unsigned long flags; - spin_lock_irqsave(pgd_spinlock(mm->pgd), flags); - set_pte(ptep, pte_wrprotect(*ptep)); - purge_tlb_entries(mm, addr); - spin_unlock_irqrestore(pgd_spinlock(mm->pgd), flags); + set_pte_at(mm, addr, ptep, pte_wrprotect(*ptep)); } #define pte_same(A,B) (pte_val(A) == pte_val(B)) diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c index 305768a40773..cd2cc1b1648c 100644 --- a/arch/parisc/kernel/asm-offsets.c +++ b/arch/parisc/kernel/asm-offsets.c @@ -268,7 +268,6 @@ int main(void) DEFINE(ASM_BITS_PER_PGD, BITS_PER_PGD); DEFINE(ASM_BITS_PER_PMD, BITS_PER_PMD); DEFINE(ASM_BITS_PER_PTE, BITS_PER_PTE); - DEFINE(ASM_PGD_PMD_OFFSET, -(PAGE_SIZE << PGD_ORDER)); DEFINE(ASM_PMD_ENTRY, ((PAGE_OFFSET & PMD_MASK) >> PMD_SHIFT)); DEFINE(ASM_PGD_ENTRY, PAGE_OFFSET >> PGDIR_SHIFT); DEFINE(ASM_PGD_ENTRY_SIZE, PGD_ENTRY_SIZE); diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 3da39140babc..05bed27eef85 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -35,10 +35,9 @@ .level 2.0 #endif - .import pa_tlb_lock,data - .macro load_pa_tlb_lock reg - mfctl %cr25,\reg - addil L%(PAGE_SIZE << (PGD_ALLOC_ORDER - 1)),\reg + /* Get aligned page_table_lock address for this mm from cr28/tr4 */ + .macro get_ptl reg + mfctl %cr28,\reg .endm /* space_to_prot macro creates a prot id from a space id */ @@ -407,7 +406,9 @@ # endif #endif dep %r0,31,PAGE_SHIFT,\pmd /* clear offset */ +#if CONFIG_PGTABLE_LEVELS < 3 copy %r0,\pte +#endif ldw,s \index(\pmd),\pmd bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault dep %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */ @@ -417,38 +418,23 @@ shladd \index,BITS_PER_PTE_ENTRY,\pmd,\pmd /* pmd is now pte */ .endm - /* Look up PTE in a 3-Level scheme. - * - * Here we implement a Hybrid L2/L3 scheme: we allocate the - * first pmd adjacent to the pgd. This means that we can - * subtract a constant offset to get to it. The pmd and pgd - * sizes are arranged so that a single pmd covers 4GB (giving - * a full LP64 process access to 8TB) so our lookups are - * effectively L2 for the first 4GB of the kernel (i.e. for - * all ILP32 processes and all the kernel for machines with - * under 4GB of memory) */ + /* Look up PTE in a 3-Level scheme. */ .macro L3_ptep pgd,pte,index,va,fault -#if CONFIG_PGTABLE_LEVELS == 3 /* we might have a 2-Level scheme, e.g. with 16kb page size */ +#if CONFIG_PGTABLE_LEVELS == 3 + copy %r0,\pte extrd,u \va,63-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index - extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 ldw,s \index(\pgd),\pgd - extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 bb,>=,n \pgd,_PxD_PRESENT_BIT,\fault - extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 - shld \pgd,PxD_VALUE_SHIFT,\index - extrd,u,*= \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 - copy \index,\pgd - extrd,u,*<> \va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0 - ldo ASM_PGD_PMD_OFFSET(\pgd),\pgd + shld \pgd,PxD_VALUE_SHIFT,\pgd #endif L2_ptep \pgd,\pte,\index,\va,\fault .endm - /* Acquire pa_tlb_lock lock and check page is present. */ - .macro tlb_lock spc,ptp,pte,tmp,tmp1,fault -#ifdef CONFIG_SMP + /* Acquire page_table_lock and check page is present. */ + .macro ptl_lock spc,ptp,pte,tmp,tmp1,fault +#ifdef CONFIG_TLB_PTLOCK 98: cmpib,COND(=),n 0,\spc,2f - load_pa_tlb_lock \tmp + get_ptl \tmp 1: LDCW 0(\tmp),\tmp1 cmpib,COND(=) 0,\tmp1,1b nop @@ -463,26 +449,26 @@ 3: .endm - /* Release pa_tlb_lock lock without reloading lock address. + /* Release page_table_lock without reloading lock address. Note that the values in the register spc are limited to NR_SPACE_IDS (262144). Thus, the stw instruction always stores a nonzero value even when register spc is 64 bits. We use an ordered store to ensure all prior accesses are performed prior to releasing the lock. */ - .macro tlb_unlock0 spc,tmp -#ifdef CONFIG_SMP + .macro ptl_unlock0 spc,tmp +#ifdef CONFIG_TLB_PTLOCK 98: or,COND(=) %r0,\spc,%r0 stw,ma \spc,0(\tmp) 99: ALTERNATIVE(98b, 99b, ALT_COND_NO_SMP, INSN_NOP) #endif .endm - /* Release pa_tlb_lock lock. */ - .macro tlb_unlock1 spc,tmp -#ifdef CONFIG_SMP -98: load_pa_tlb_lock \tmp + /* Release page_table_lock. */ + .macro ptl_unlock1 spc,tmp +#ifdef CONFIG_TLB_PTLOCK +98: get_ptl \tmp + ptl_unlock0 \spc,\tmp 99: ALTERNATIVE(98b, 99b, ALT_COND_NO_SMP, INSN_NOP) - tlb_unlock0 \spc,\tmp #endif .endm @@ -1165,14 +1151,14 @@ dtlb_miss_20w: L3_ptep ptp,pte,t0,va,dtlb_check_alias_20w - tlb_lock spc,ptp,pte,t0,t1,dtlb_check_alias_20w + ptl_lock spc,ptp,pte,t0,t1,dtlb_check_alias_20w update_accessed ptp,pte,t0,t1 make_insert_tlb spc,pte,prot,t1 idtlbt pte,prot - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1191,14 +1177,14 @@ nadtlb_miss_20w: L3_ptep ptp,pte,t0,va,nadtlb_check_alias_20w - tlb_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_20w + ptl_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_20w update_accessed ptp,pte,t0,t1 make_insert_tlb spc,pte,prot,t1 idtlbt pte,prot - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1219,7 +1205,7 @@ dtlb_miss_11: L2_ptep ptp,pte,t0,va,dtlb_check_alias_11 - tlb_lock spc,ptp,pte,t0,t1,dtlb_check_alias_11 + ptl_lock spc,ptp,pte,t0,t1,dtlb_check_alias_11 update_accessed ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1232,7 +1218,7 @@ dtlb_miss_11: mtsp t1, %sr1 /* Restore sr1 */ - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1252,7 +1238,7 @@ nadtlb_miss_11: L2_ptep ptp,pte,t0,va,nadtlb_check_alias_11 - tlb_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_11 + ptl_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_11 update_accessed ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1265,7 +1251,7 @@ nadtlb_miss_11: mtsp t1, %sr1 /* Restore sr1 */ - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1285,7 +1271,7 @@ dtlb_miss_20: L2_ptep ptp,pte,t0,va,dtlb_check_alias_20 - tlb_lock spc,ptp,pte,t0,t1,dtlb_check_alias_20 + ptl_lock spc,ptp,pte,t0,t1,dtlb_check_alias_20 update_accessed ptp,pte,t0,t1 make_insert_tlb spc,pte,prot,t1 @@ -1294,7 +1280,7 @@ dtlb_miss_20: idtlbt pte,prot - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1313,7 +1299,7 @@ nadtlb_miss_20: L2_ptep ptp,pte,t0,va,nadtlb_check_alias_20 - tlb_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_20 + ptl_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_20 update_accessed ptp,pte,t0,t1 make_insert_tlb spc,pte,prot,t1 @@ -1322,7 +1308,7 @@ nadtlb_miss_20: idtlbt pte,prot - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1422,14 +1408,14 @@ itlb_miss_20w: L3_ptep ptp,pte,t0,va,itlb_fault - tlb_lock spc,ptp,pte,t0,t1,itlb_fault + ptl_lock spc,ptp,pte,t0,t1,itlb_fault update_accessed ptp,pte,t0,t1 make_insert_tlb spc,pte,prot,t1 iitlbt pte,prot - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1446,14 +1432,14 @@ naitlb_miss_20w: L3_ptep ptp,pte,t0,va,naitlb_check_alias_20w - tlb_lock spc,ptp,pte,t0,t1,naitlb_check_alias_20w + ptl_lock spc,ptp,pte,t0,t1,naitlb_check_alias_20w update_accessed ptp,pte,t0,t1 make_insert_tlb spc,pte,prot,t1 iitlbt pte,prot - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1474,7 +1460,7 @@ itlb_miss_11: L2_ptep ptp,pte,t0,va,itlb_fault - tlb_lock spc,ptp,pte,t0,t1,itlb_fault + ptl_lock spc,ptp,pte,t0,t1,itlb_fault update_accessed ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1487,7 +1473,7 @@ itlb_miss_11: mtsp t1, %sr1 /* Restore sr1 */ - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1498,7 +1484,7 @@ naitlb_miss_11: L2_ptep ptp,pte,t0,va,naitlb_check_alias_11 - tlb_lock spc,ptp,pte,t0,t1,naitlb_check_alias_11 + ptl_lock spc,ptp,pte,t0,t1,naitlb_check_alias_11 update_accessed ptp,pte,t0,t1 make_insert_tlb_11 spc,pte,prot @@ -1511,7 +1497,7 @@ naitlb_miss_11: mtsp t1, %sr1 /* Restore sr1 */ - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1532,7 +1518,7 @@ itlb_miss_20: L2_ptep ptp,pte,t0,va,itlb_fault - tlb_lock spc,ptp,pte,t0,t1,itlb_fault + ptl_lock spc,ptp,pte,t0,t1,itlb_fault update_accessed ptp,pte,t0,t1 make_insert_tlb spc,pte,prot,t1 @@ -1541,7 +1527,7 @@ itlb_miss_20: iitlbt pte,prot - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1552,7 +1538,7 @@ naitlb_miss_20: L2_ptep ptp,pte,t0,va,naitlb_check_alias_20 - tlb_lock spc,ptp,pte,t0,t1,naitlb_check_alias_20 + ptl_lock spc,ptp,pte,t0,t1,naitlb_check_alias_20 update_accessed ptp,pte,t0,t1 make_insert_tlb spc,pte,prot,t1 @@ -1561,7 +1547,7 @@ naitlb_miss_20: iitlbt pte,prot - tlb_unlock1 spc,t0 + ptl_unlock1 spc,t0 rfir nop @@ -1584,14 +1570,14 @@ dbit_trap_20w: L3_ptep ptp,pte,t0,va,dbit_fault - tlb_lock spc,ptp,pte,t0,t1,dbit_fault + ptl_lock spc,ptp,pte,t0,t1,dbit_fault update_dirty ptp,pte,t1 make_insert_tlb spc,pte,prot,t1 idtlbt pte,prot - tlb_unlock0 spc,t0 + ptl_unlock0 spc,t0 rfir nop #else @@ -1604,7 +1590,7 @@ dbit_trap_11: L2_ptep ptp,pte,t0,va,dbit_fault - tlb_lock spc,ptp,pte,t0,t1,dbit_fault + ptl_lock spc,ptp,pte,t0,t1,dbit_fault update_dirty ptp,pte,t1 make_insert_tlb_11 spc,pte,prot @@ -1617,7 +1603,7 @@ dbit_trap_11: mtsp t1, %sr1 /* Restore sr1 */ - tlb_unlock0 spc,t0 + ptl_unlock0 spc,t0 rfir nop @@ -1628,7 +1614,7 @@ dbit_trap_20: L2_ptep ptp,pte,t0,va,dbit_fault - tlb_lock spc,ptp,pte,t0,t1,dbit_fault + ptl_lock spc,ptp,pte,t0,t1,dbit_fault update_dirty ptp,pte,t1 make_insert_tlb spc,pte,prot,t1 @@ -1637,7 +1623,7 @@ dbit_trap_20: idtlbt pte,prot - tlb_unlock0 spc,t0 + ptl_unlock0 spc,t0 rfir nop #endif diff --git a/arch/parisc/mm/hugetlbpage.c b/arch/parisc/mm/hugetlbpage.c index d7ba014a7fbb..43652de5f139 100644 --- a/arch/parisc/mm/hugetlbpage.c +++ b/arch/parisc/mm/hugetlbpage.c @@ -142,24 +142,17 @@ static void __set_huge_pte_at(struct mm_struct *mm, unsigned long addr, void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t entry) { - unsigned long flags; - - spin_lock_irqsave(pgd_spinlock((mm)->pgd), flags); __set_huge_pte_at(mm, addr, ptep, entry); - spin_unlock_irqrestore(pgd_spinlock((mm)->pgd), flags); } pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - unsigned long flags; pte_t entry; - spin_lock_irqsave(pgd_spinlock((mm)->pgd), flags); entry = *ptep; __set_huge_pte_at(mm, addr, ptep, __pte(0)); - spin_unlock_irqrestore(pgd_spinlock((mm)->pgd), flags); return entry; } @@ -168,29 +161,23 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, void huge_ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - unsigned long flags; pte_t old_pte; - spin_lock_irqsave(pgd_spinlock((mm)->pgd), flags); old_pte = *ptep; __set_huge_pte_at(mm, addr, ptep, pte_wrprotect(old_pte)); - spin_unlock_irqrestore(pgd_spinlock((mm)->pgd), flags); } int huge_ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep, pte_t pte, int dirty) { - unsigned long flags; int changed; struct mm_struct *mm = vma->vm_mm; - spin_lock_irqsave(pgd_spinlock((mm)->pgd), flags); changed = !pte_same(*ptep, pte); if (changed) { __set_huge_pte_at(mm, addr, ptep, pte); } - spin_unlock_irqrestore(pgd_spinlock((mm)->pgd), flags); return changed; } diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 319afa00cdf7..6a083fc87a03 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -37,11 +37,6 @@ extern int data_start; extern void parisc_kernel_start(void); /* Kernel entry point in head.S */ #if CONFIG_PGTABLE_LEVELS == 3 -/* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout - * with the first pmd adjacent to the pgd and below it. gcc doesn't actually - * guarantee that global objects will be laid out in memory in the same order - * as the order of declaration, so put these in different sections and use - * the linker script to order them. */ pmd_t pmd0[PTRS_PER_PMD] __section(".data..vm0.pmd") __attribute__ ((aligned(PAGE_SIZE))); #endif @@ -558,6 +553,11 @@ void __init mem_init(void) BUILD_BUG_ON(PGD_ENTRY_SIZE != sizeof(pgd_t)); BUILD_BUG_ON(PAGE_SHIFT + BITS_PER_PTE + BITS_PER_PMD + BITS_PER_PGD > BITS_PER_LONG); +#if CONFIG_PGTABLE_LEVELS == 3 + BUILD_BUG_ON(PT_INITIAL > PTRS_PER_PMD); +#else + BUILD_BUG_ON(PT_INITIAL > PTRS_PER_PGD); +#endif high_memory = __va((max_pfn << PAGE_SHIFT)); set_max_mapnr(max_low_pfn); -- 2.25.1
From: John David Anglin <dave.anglin@bell.net> stable inclusion from stable-v5.10.145 commit 7bbdf49e2624a318b5e08f3a1acb0503ecd107d9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 38860b2c8bb1b92f61396eb06a63adff916fc31d ] For years, there have been random segmentation faults in userspace on SMP PA-RISC machines. It occurred to me that this might be a problem in set_pte_at(). MIPS and some other architectures do cache flushes when installing PTEs with the present bit set. Here I have adapted the code in update_mmu_cache() to flush the kernel mapping when the kernel flush is deferred, or when the kernel mapping may alias with the user mapping. This simplifies calls to update_mmu_cache(). I also changed the barrier in set_pte() from a compiler barrier to a full memory barrier. I know this change is not sufficient to fix the problem. It might not be needed. I have had a few days of operation with 5.14.16 to 5.15.1 and haven't seen any random segmentation faults on rp3440 or c8000 so far. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@kernel.org # 5.12+ Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/parisc/include/asm/pgtable.h | 10 ++++++++-- arch/parisc/kernel/cache.c | 4 ++-- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h index 7218345a447f..ade591927cbf 100644 --- a/arch/parisc/include/asm/pgtable.h +++ b/arch/parisc/include/asm/pgtable.h @@ -76,6 +76,8 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr) purge_tlb_end(flags); } +extern void __update_cache(pte_t pte); + /* Certain architectures need to do special things when PTEs * within a page table are directly modified. Thus, the following * hook is made available. @@ -83,11 +85,14 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr) #define set_pte(pteptr, pteval) \ do { \ *(pteptr) = (pteval); \ - barrier(); \ + mb(); \ } while(0) #define set_pte_at(mm, addr, pteptr, pteval) \ do { \ + if (pte_present(pteval) && \ + pte_user(pteval)) \ + __update_cache(pteval); \ *(pteptr) = (pteval); \ purge_tlb_entries(mm, addr); \ } while (0) @@ -305,6 +310,7 @@ extern unsigned long *empty_zero_page; #define pte_none(x) (pte_val(x) == 0) #define pte_present(x) (pte_val(x) & _PAGE_PRESENT) +#define pte_user(x) (pte_val(x) & _PAGE_USER) #define pte_clear(mm, addr, xp) set_pte_at(mm, addr, xp, __pte(0)) #define pmd_flag(x) (pmd_val(x) & PxD_FLAG_MASK) @@ -412,7 +418,7 @@ extern void paging_init (void); #define PG_dcache_dirty PG_arch_1 -extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *); +#define update_mmu_cache(vms,addr,ptep) __update_cache(*ptep) /* Encode and de-code a swap entry */ diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 86a1a63563fd..c81ab0cb8925 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -83,9 +83,9 @@ EXPORT_SYMBOL(flush_cache_all_local); #define pfn_va(pfn) __va(PFN_PHYS(pfn)) void -update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) +__update_cache(pte_t pte) { - unsigned long pfn = pte_pfn(*ptep); + unsigned long pfn = pte_pfn(pte); struct page *page; /* We don't have pte special. As a result, we can be called with -- 2.25.1
From: Anatolij Gustschin <agust@denx.de> stable inclusion from stable-v5.10.145 commit 4dbe84b9b66cfe604f11d25a377c6ed1347ab6b3 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit adec566b05288f2787a1f88dbaf77ed8b0c644fa ] memset() and memcpy() on an MMIO region like here results in a lockup at startup on mpc5200 platform (since this first happens during probing of the ATA and Ethernet drivers). Use memset_io() and memcpy_toio() instead. Fixes: 2f9ea1bde0d1 ("bestcomm: core bestcomm support for Freescale MPC5200") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by: Anatolij Gustschin <agust@denx.de> Link: https://lore.kernel.org/r/20211014094012.21286-1-agust@denx.de Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/dma/bestcomm/ata.c | 2 +- drivers/dma/bestcomm/bestcomm.c | 22 +++++++++++----------- drivers/dma/bestcomm/fec.c | 4 ++-- drivers/dma/bestcomm/gen_bd.c | 4 ++-- 4 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/dma/bestcomm/ata.c b/drivers/dma/bestcomm/ata.c index 2fd87f83cf90..e169f18da551 100644 --- a/drivers/dma/bestcomm/ata.c +++ b/drivers/dma/bestcomm/ata.c @@ -133,7 +133,7 @@ void bcom_ata_reset_bd(struct bcom_task *tsk) struct bcom_ata_var *var; /* Reset all BD */ - memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + memset_io(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); tsk->index = 0; tsk->outdex = 0; diff --git a/drivers/dma/bestcomm/bestcomm.c b/drivers/dma/bestcomm/bestcomm.c index d91cbbe7a48f..8c42e5ca00a9 100644 --- a/drivers/dma/bestcomm/bestcomm.c +++ b/drivers/dma/bestcomm/bestcomm.c @@ -95,7 +95,7 @@ bcom_task_alloc(int bd_count, int bd_size, int priv_size) tsk->bd = bcom_sram_alloc(bd_count * bd_size, 4, &tsk->bd_pa); if (!tsk->bd) goto error; - memset(tsk->bd, 0x00, bd_count * bd_size); + memset_io(tsk->bd, 0x00, bd_count * bd_size); tsk->num_bd = bd_count; tsk->bd_size = bd_size; @@ -186,16 +186,16 @@ bcom_load_image(int task, u32 *task_image) inc = bcom_task_inc(task); /* Clear & copy */ - memset(var, 0x00, BCOM_VAR_SIZE); - memset(inc, 0x00, BCOM_INC_SIZE); + memset_io(var, 0x00, BCOM_VAR_SIZE); + memset_io(inc, 0x00, BCOM_INC_SIZE); desc_src = (u32 *)(hdr + 1); var_src = desc_src + hdr->desc_size; inc_src = var_src + hdr->var_size; - memcpy(desc, desc_src, hdr->desc_size * sizeof(u32)); - memcpy(var + hdr->first_var, var_src, hdr->var_size * sizeof(u32)); - memcpy(inc, inc_src, hdr->inc_size * sizeof(u32)); + memcpy_toio(desc, desc_src, hdr->desc_size * sizeof(u32)); + memcpy_toio(var + hdr->first_var, var_src, hdr->var_size * sizeof(u32)); + memcpy_toio(inc, inc_src, hdr->inc_size * sizeof(u32)); return 0; } @@ -302,13 +302,13 @@ static int bcom_engine_init(void) return -ENOMEM; } - memset(bcom_eng->tdt, 0x00, tdt_size); - memset(bcom_eng->ctx, 0x00, ctx_size); - memset(bcom_eng->var, 0x00, var_size); - memset(bcom_eng->fdt, 0x00, fdt_size); + memset_io(bcom_eng->tdt, 0x00, tdt_size); + memset_io(bcom_eng->ctx, 0x00, ctx_size); + memset_io(bcom_eng->var, 0x00, var_size); + memset_io(bcom_eng->fdt, 0x00, fdt_size); /* Copy the FDT for the EU#3 */ - memcpy(&bcom_eng->fdt[48], fdt_ops, sizeof(fdt_ops)); + memcpy_toio(&bcom_eng->fdt[48], fdt_ops, sizeof(fdt_ops)); /* Initialize Task base structure */ for (task=0; task<BCOM_MAX_TASKS; task++) diff --git a/drivers/dma/bestcomm/fec.c b/drivers/dma/bestcomm/fec.c index 7f1fb1c999e4..d203618ac11f 100644 --- a/drivers/dma/bestcomm/fec.c +++ b/drivers/dma/bestcomm/fec.c @@ -140,7 +140,7 @@ bcom_fec_rx_reset(struct bcom_task *tsk) tsk->index = 0; tsk->outdex = 0; - memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + memset_io(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); /* Configure some stuff */ bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_RX_BD_PRAGMA); @@ -241,7 +241,7 @@ bcom_fec_tx_reset(struct bcom_task *tsk) tsk->index = 0; tsk->outdex = 0; - memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + memset_io(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); /* Configure some stuff */ bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_TX_BD_PRAGMA); diff --git a/drivers/dma/bestcomm/gen_bd.c b/drivers/dma/bestcomm/gen_bd.c index 906ddba6a6f5..8a24a5cbc263 100644 --- a/drivers/dma/bestcomm/gen_bd.c +++ b/drivers/dma/bestcomm/gen_bd.c @@ -142,7 +142,7 @@ bcom_gen_bd_rx_reset(struct bcom_task *tsk) tsk->index = 0; tsk->outdex = 0; - memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + memset_io(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); /* Configure some stuff */ bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_RX_BD_PRAGMA); @@ -226,7 +226,7 @@ bcom_gen_bd_tx_reset(struct bcom_task *tsk) tsk->index = 0; tsk->outdex = 0; - memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + memset_io(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); /* Configure some stuff */ bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_TX_BD_PRAGMA); -- 2.25.1
From: Nathan Lynch <nathanl@linux.ibm.com> stable inclusion from stable-v5.10.145 commit d5ee5a9e47f32626b6be3dec5710b342fca5c28b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2efd7f6eb9b7107e469837d8452e750d7d080a5d ] In pseries_devicetree_update(), with each call to ibm,update-nodes the partition firmware communicates the node to be deleted or updated by placing its phandle in the work buffer. Each of delete_dt_node(), update_dt_node(), and add_dt_node() have duplicate lookups using the phandle value and corresponding refcount management. Move the lookup and of_node_put() into pseries_devicetree_update(), and emit a warning on any failed lookups. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201207215200.1785968-29-nathanl@linux.ibm.com Stable-dep-of: 319fa1a52e43 ("powerpc/pseries/mobility: ignore ibm, platform-facilities updates") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/powerpc/platforms/pseries/mobility.c | 49 ++++++++--------------- 1 file changed, 17 insertions(+), 32 deletions(-) diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c index 2f73cb5bf12d..acf1664d1ad7 100644 --- a/arch/powerpc/platforms/pseries/mobility.c +++ b/arch/powerpc/platforms/pseries/mobility.c @@ -59,18 +59,10 @@ static int mobility_rtas_call(int token, char *buf, s32 scope) return rc; } -static int delete_dt_node(__be32 phandle) +static int delete_dt_node(struct device_node *dn) { - struct device_node *dn; - - dn = of_find_node_by_phandle(be32_to_cpu(phandle)); - if (!dn) - return -ENOENT; - pr_debug("removing node %pOFfp\n", dn); - dlpar_detach_node(dn); - of_node_put(dn); return 0; } @@ -135,10 +127,9 @@ static int update_dt_property(struct device_node *dn, struct property **prop, return 0; } -static int update_dt_node(__be32 phandle, s32 scope) +static int update_dt_node(struct device_node *dn, s32 scope) { struct update_props_workarea *upwa; - struct device_node *dn; struct property *prop = NULL; int i, rc, rtas_rc; char *prop_data; @@ -155,14 +146,8 @@ static int update_dt_node(__be32 phandle, s32 scope) if (!rtas_buf) return -ENOMEM; - dn = of_find_node_by_phandle(be32_to_cpu(phandle)); - if (!dn) { - kfree(rtas_buf); - return -ENOENT; - } - upwa = (struct update_props_workarea *)&rtas_buf[0]; - upwa->phandle = phandle; + upwa->phandle = cpu_to_be32(dn->phandle); do { rtas_rc = mobility_rtas_call(update_properties_token, rtas_buf, @@ -221,26 +206,18 @@ static int update_dt_node(__be32 phandle, s32 scope) cond_resched(); } while (rtas_rc == 1); - of_node_put(dn); kfree(rtas_buf); return 0; } -static int add_dt_node(__be32 parent_phandle, __be32 drc_index) +static int add_dt_node(struct device_node *parent_dn, __be32 drc_index) { struct device_node *dn; - struct device_node *parent_dn; int rc; - parent_dn = of_find_node_by_phandle(be32_to_cpu(parent_phandle)); - if (!parent_dn) - return -ENOENT; - dn = dlpar_configure_connector(drc_index, parent_dn); - if (!dn) { - of_node_put(parent_dn); + if (!dn) return -ENOENT; - } rc = dlpar_attach_node(dn, parent_dn); if (rc) @@ -248,7 +225,6 @@ static int add_dt_node(__be32 parent_phandle, __be32 drc_index) pr_debug("added node %pOFfp\n", dn); - of_node_put(parent_dn); return rc; } @@ -281,22 +257,31 @@ int pseries_devicetree_update(s32 scope) data++; for (i = 0; i < node_count; i++) { + struct device_node *np; __be32 phandle = *data++; __be32 drc_index; + np = of_find_node_by_phandle(be32_to_cpu(phandle)); + if (!np) { + pr_warn("Failed lookup: phandle 0x%x for action 0x%x\n", + be32_to_cpu(phandle), action); + continue; + } + switch (action) { case DELETE_DT_NODE: - delete_dt_node(phandle); + delete_dt_node(np); break; case UPDATE_DT_NODE: - update_dt_node(phandle, scope); + update_dt_node(np, scope); break; case ADD_DT_NODE: drc_index = *data++; - add_dt_node(phandle, drc_index); + add_dt_node(np, drc_index); break; } + of_node_put(np); cond_resched(); } } -- 2.25.1
From: Nathan Lynch <nathanl@linux.ibm.com> stable inclusion from stable-v5.10.145 commit cd226d8c1b4ae90f041c9ff12eaf93b994b1a149 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 319fa1a52e438a6e028329187783a25ad498c4e6 ] On VMs with NX encryption, compression, and/or RNG offload, these capabilities are described by nodes in the ibm,platform-facilities device tree hierarchy: $ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/ /sys/firmware/devicetree/base/ibm,platform-facilities/ ├── ibm,compression-v1 ├── ibm,random-v1 └── ibm,sym-encryption-v1 3 directories The acceleration functions that these nodes describe are not disrupted by live migration, not even temporarily. But the post-migration ibm,update-nodes sequence firmware always sends "delete" messages for this hierarchy, followed by an "add" directive to reconstruct it via ibm,configure-connector (log with debugging statements enabled in mobility.c): mobility: removing node /ibm,platform-facilities/ibm,random-v1:4294967285 mobility: removing node /ibm,platform-facilities/ibm,compression-v1:4294967284 mobility: removing node /ibm,platform-facilities/ibm,sym-encryption-v1:4294967283 mobility: removing node /ibm,platform-facilities:4294967286 ... mobility: added node /ibm,platform-facilities:4294967286 Note we receive a single "add" message for the entire hierarchy, and what we receive from the ibm,configure-connector sequence is the top-level platform-facilities node along with its three children. The debug message simply reports the parent node and not the whole subtree. Also, significantly, the nodes added are almost completely equivalent to the ones removed; even phandles are unchanged. ibm,shared-interrupt-pool in the leaf nodes is the only property I've observed to differ, and Linux does not use that. So in practice, the sum of update messages Linux receives for this hierarchy is equivalent to minor property updates. We succeed in removing the original hierarchy from the device tree. But the vio bus code is ignorant of this, and does not unbind or relinquish its references. The leaf nodes, still reachable through sysfs, of course still refer to the now-freed ibm,platform-facilities parent node, which makes use-after-free possible: refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 1706 at lib/refcount.c:25 refcount_warn_saturate+0x164/0x1f0 refcount_warn_saturate+0x160/0x1f0 (unreliable) kobject_get+0xf0/0x100 of_node_get+0x30/0x50 of_get_parent+0x50/0xb0 of_fwnode_get_parent+0x54/0x90 fwnode_count_parents+0x50/0x150 fwnode_full_name_string+0x30/0x110 device_node_string+0x49c/0x790 vsnprintf+0x1c0/0x4c0 sprintf+0x44/0x60 devspec_show+0x34/0x50 dev_attr_show+0x40/0xa0 sysfs_kf_seq_show+0xbc/0x200 kernfs_seq_show+0x44/0x60 seq_read_iter+0x2a4/0x740 kernfs_fop_read_iter+0x254/0x2e0 new_sync_read+0x120/0x190 vfs_read+0x1d0/0x240 Moreover, the "new" replacement subtree is not correctly added to the device tree, resulting in ibm,platform-facilities parent node without the appropriate leaf nodes, and broken symlinks in the sysfs device hierarchy: $ tree -d /sys/firmware/devicetree/base/ibm,platform-facilities/ /sys/firmware/devicetree/base/ibm,platform-facilities/ 0 directories $ cd /sys/devices/vio ; find . -xtype l -exec file {} + ./ibm,sym-encryption-v1/of_node: broken symbolic link to ../../../firmware/devicetree/base/ibm,platform-facilities/ibm,sym-encryption-v1 ./ibm,random-v1/of_node: broken symbolic link to ../../../firmware/devicetree/base/ibm,platform-facilities/ibm,random-v1 ./ibm,compression-v1/of_node: broken symbolic link to ../../../firmware/devicetree/base/ibm,platform-facilities/ibm,compression-v1 This is because add_dt_node() -> dlpar_attach_node() attaches only the parent node returned from configure-connector, ignoring any children. This should be corrected for the general case, but fixing that won't help with the stale OF node references, which is the more urgent problem. One way to address that would be to make the drivers respond to node removal notifications, so that node references can be dropped appropriately. But this would likely force the drivers to disrupt active clients for no useful purpose: equivalent nodes are immediately re-added. And recall that the acceleration capabilities described by the nodes remain available throughout the whole process. The solution I believe to be robust for this situation is to convert remove+add of a node with an unchanged phandle to an update of the node's properties in the Linux device tree structure. That would involve changing and adding a fair amount of code, and may take several iterations to land. Until that can be realized we have a confirmed use-after-free and the possibility of memory corruption. So add a limited workaround that discriminates on the node type, ignoring adds and removes. This should be amenable to backporting in the meantime. Fixes: 410bccf97881 ("powerpc/pseries: Partition migration in the kernel") Cc: stable@vger.kernel.org Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211020194703.2613093-1-nathanl@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/powerpc/platforms/pseries/mobility.c | 34 +++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c index acf1664d1ad7..f386a7bc3811 100644 --- a/arch/powerpc/platforms/pseries/mobility.c +++ b/arch/powerpc/platforms/pseries/mobility.c @@ -61,6 +61,27 @@ static int mobility_rtas_call(int token, char *buf, s32 scope) static int delete_dt_node(struct device_node *dn) { + struct device_node *pdn; + bool is_platfac; + + pdn = of_get_parent(dn); + is_platfac = of_node_is_type(dn, "ibm,platform-facilities") || + of_node_is_type(pdn, "ibm,platform-facilities"); + of_node_put(pdn); + + /* + * The drivers that bind to nodes in the platform-facilities + * hierarchy don't support node removal, and the removal directive + * from firmware is always followed by an add of an equivalent + * node. The capability (e.g. RNG, encryption, compression) + * represented by the node is never interrupted by the migration. + * So ignore changes to this part of the tree. + */ + if (is_platfac) { + pr_notice("ignoring remove operation for %pOFfp\n", dn); + return 0; + } + pr_debug("removing node %pOFfp\n", dn); dlpar_detach_node(dn); return 0; @@ -219,6 +240,19 @@ static int add_dt_node(struct device_node *parent_dn, __be32 drc_index) if (!dn) return -ENOENT; + /* + * Since delete_dt_node() ignores this node type, this is the + * necessary counterpart. We also know that a platform-facilities + * node returned from dlpar_configure_connector() has children + * attached, and dlpar_attach_node() only adds the parent, leaking + * the children. So ignore these on the add side for now. + */ + if (of_node_is_type(dn, "ibm,platform-facilities")) { + pr_notice("ignoring add operation for %pOF\n", dn); + dlpar_free_cc_nodes(dn); + return 0; + } + rc = dlpar_attach_node(dn, parent_dn); if (rc) dlpar_free_cc_nodes(dn); -- 2.25.1
From: Frank Li <Frank.Li@nxp.com> stable inclusion from stable-v5.10.145 commit 8faabaf112c925c808e95898da93072433ca1dc9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 387c2b6ba197c6df28e75359f7d892f7c8dec204 ] This issue was found at android12 MTP. 1. MTP submit many out urb request. 2. Cancel left requests (>20) when enough data get from host 3. Send ACK by IN endpoint. 4. MTP submit new out urb request. 5. 4's urb never complete. TRACE LOG: MtpServer-2157 [000] d..3 1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0 MtpServer-2157 [000] d..3 1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0 MtpServer-2157 [000] d..3 1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0 .... MtpServer-2157 [000] d..1 1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0 MtpServer-2157 [000] d..2 1293.630445: cdns3_wa1: WA1: ep1out set guard MtpServer-2157 [000] d..2 1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit MtpServer-2157 [000] d..2 1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0 MtpServer-2157 [000] d..2 1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414 .... irq/241-5b13000-2154 [000] d..1 1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0 irq/241-5b13000-2154 [000] d..1 1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0 irq/241-5b13000-2154 [000] d..1 1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184 Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong. The TRB link is below when irq happen. DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). Original code check LINK TRB, but DEQ just move one step. LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR). This patch skip all LINK TRB and sync DEQ to trb's start. LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START DMA(EP_TRADDR). Acked-by: Peter Chen <peter.chen@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jun Li <jun.li@nxp.com> Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/cdns3/gadget.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index a37ea946459c..c6fc14b169da 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -352,19 +352,6 @@ static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep) cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs); } -static void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req) -{ - struct cdns3_endpoint *priv_ep = priv_req->priv_ep; - int current_trb = priv_req->start_trb; - - while (current_trb != priv_req->end_trb) { - cdns3_ep_inc_deq(priv_ep); - current_trb = priv_ep->dequeue; - } - - cdns3_ep_inc_deq(priv_ep); -} - /** * cdns3_allow_enable_l1 - enable/disable permits to transition to L1. * @priv_dev: Extended gadget object @@ -1518,10 +1505,11 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev, trb = priv_ep->trb_pool + priv_ep->dequeue; - /* Request was dequeued and TRB was changed to TRB_LINK. */ - if (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) { + /* The TRB was changed as link TRB, and the request was handled at ep_dequeue */ + while (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) { trace_cdns3_complete_trb(priv_ep, trb); - cdns3_move_deq_to_next_trb(priv_req); + cdns3_ep_inc_deq(priv_ep); + trb = priv_ep->trb_pool + priv_ep->dequeue; } if (!request->stream_id) { -- 2.25.1
From: Alex Hung <alex.hung@canonical.com> stable inclusion from stable-v5.10.145 commit 4a6c6041e8d80e2ea464a969d90347a4c28e7a7e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 01e16cb67cce68afaeb9c7bed72299036dbb0bc1 ] Similar to other systems Surface Go 3 requires a DMI quirk to enable 5 button array for power and volume buttons. Buglink: https://github.com/linux-surface/linux-surface/issues/595 Cc: stable@vger.kernel.org Signed-off-by: Alex Hung <alex.hung@canonical.com> Link: https://lore.kernel.org/r/20211203212810.2666508-1-alex.hung@canonical.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/platform/x86/intel-hid.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index 8a0cd5bf0065..cebddefba2f4 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -93,6 +93,13 @@ static const struct dmi_system_id button_array_table[] = { DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Tablet Gen 2"), }, }, + { + .ident = "Microsoft Surface Go 3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), + }, + }, { } }; -- 2.25.1
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> stable inclusion from stable-v5.10.145 commit cae6172a9464779c8f9f79e12c16ed2cf4778072 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 04ec4e6250e5f58b525b08f3dca45c7d7427620e ] Martyn Welch reports that his CPU port is unable to link where it has been necessary to use one of the switch ports with an internal PHY for the CPU port. The reason behind this is the port control register is left forcing the link down, preventing traffic flow. This occurs because during initialisation, phylink expects the link to be down, and DSA forces the link down by synthesising a call to the DSA drivers phylink_mac_link_down() method, but we don't touch the forced-link state when we later reconfigure the port. Resolve this by also unforcing the link state when we are operating in PHY mode and the PPU is set to poll the PHY to retrieve link status information. Reported-by: Martyn Welch <martyn.welch@collabora.com> Tested-by: Martyn Welch <martyn.welch@collabora.com> Fixes: 3be98b2d5fbc ("net: dsa: Down cpu/dsa ports phylink will control") Cc: <stable@vger.kernel.org> # 5.7: 2b29cb9e3f7f: net: dsa: mv88e6xxx: fix "don't use PHY_DETECT on internal PHY's" Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1mvFhP-00F8Zb-Ul@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/dsa/mv88e6xxx/chip.c | 64 +++++++++++++++++--------------- 1 file changed, 34 insertions(+), 30 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 7b7a8a74405d..371b345635e6 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -666,44 +666,48 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, { struct mv88e6xxx_chip *chip = ds->priv; struct mv88e6xxx_port *p; - int err; + int err = 0; p = &chip->ports[port]; - /* FIXME: is this the correct test? If we're in fixed mode on an - * internal port, why should we process this any different from - * PHY mode? On the other hand, the port may be automedia between - * an internal PHY and the serdes... - */ - if ((mode == MLO_AN_PHY) && mv88e6xxx_phy_is_internal(ds, port)) - return; - mv88e6xxx_reg_lock(chip); - /* In inband mode, the link may come up at any time while the link - * is not forced down. Force the link down while we reconfigure the - * interface mode. - */ - if (mode == MLO_AN_INBAND && p->interface != state->interface && - chip->info->ops->port_set_link) - chip->info->ops->port_set_link(chip, port, LINK_FORCED_DOWN); - - err = mv88e6xxx_port_config_interface(chip, port, state->interface); - if (err && err != -EOPNOTSUPP) - goto err_unlock; - err = mv88e6xxx_serdes_pcs_config(chip, port, mode, state->interface, - state->advertising); - /* FIXME: we should restart negotiation if something changed - which - * is something we get if we convert to using phylinks PCS operations. - */ - if (err > 0) - err = 0; + if (mode != MLO_AN_PHY || !mv88e6xxx_phy_is_internal(ds, port)) { + /* In inband mode, the link may come up at any time while the + * link is not forced down. Force the link down while we + * reconfigure the interface mode. + */ + if (mode == MLO_AN_INBAND && + p->interface != state->interface && + chip->info->ops->port_set_link) + chip->info->ops->port_set_link(chip, port, + LINK_FORCED_DOWN); + + err = mv88e6xxx_port_config_interface(chip, port, + state->interface); + if (err && err != -EOPNOTSUPP) + goto err_unlock; + + err = mv88e6xxx_serdes_pcs_config(chip, port, mode, + state->interface, + state->advertising); + /* FIXME: we should restart negotiation if something changed - + * which is something we get if we convert to using phylinks + * PCS operations. + */ + if (err > 0) + err = 0; + } /* Undo the forced down state above after completing configuration - * irrespective of its state on entry, which allows the link to come up. + * irrespective of its state on entry, which allows the link to come + * up in the in-band case where there is no separate SERDES. Also + * ensure that the link can come up if the PPU is in use and we are + * in PHY mode (we treat the PPU as an effective in-band mechanism.) */ - if (mode == MLO_AN_INBAND && p->interface != state->interface && - chip->info->ops->port_set_link) + if (chip->info->ops->port_set_link && + ((mode == MLO_AN_INBAND && p->interface != state->interface) || + (mode == MLO_AN_PHY && mv88e6xxx_port_ppu_updates(chip, port)))) chip->info->ops->port_set_link(chip, port, LINK_UNFORCED); p->interface = state->interface; -- 2.25.1
From: Sergey Shtylyov <s.shtylyov@omp.ru> stable inclusion from stable-v5.10.145 commit ee4369260e77821602102dcc7d792de39a56365c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2f945a792f67815abca26fa8a5e863ccf3fa1181 ] Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") forgot to fix up the depth check in the loop body in unflatten_dt_nodes() which makes it possible to overflow the nps[] buffer... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 81aede5c2dc6..b54fe601370b 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -315,7 +315,7 @@ static int unflatten_dt_nodes(const void *blob, for (offset = 0; offset >= 0 && depth >= initial_depth; offset = fdt_next_node(blob, offset, &depth)) { - if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH)) + if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH - 1)) continue; if (!IS_ENABLED(CONFIG_OF_KOBJ) && -- 2.25.1
From: Michael Wu <michael@allwinnertech.com> stable inclusion from stable-v5.10.145 commit 2f16f5b582cd43898cfdae0d8a0570748f57f266 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 76648c867c6c03b8a468d9c9222025873ecc613d ] The name of A100 R_PIO driver should be sun50i-a100-r-pinctrl, not sun50iw10p1-r-pinctrl. Fixes: 473436e7647d6 ("pinctrl: sunxi: add support for the Allwinner A100 pin controller") Signed-off-by: Michael Wu <michael@allwinnertech.com> Acked-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220819024541.74191-1-michael@allwinnertech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c index 21054fcacd34..18088f6f44b2 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c @@ -98,7 +98,7 @@ MODULE_DEVICE_TABLE(of, a100_r_pinctrl_match); static struct platform_driver a100_r_pinctrl_driver = { .probe = a100_r_pinctrl_probe, .driver = { - .name = "sun50iw10p1-r-pinctrl", + .name = "sun50i-a100-r-pinctrl", .of_match_table = a100_r_pinctrl_match, }, }; -- 2.25.1
From: Trond Myklebust <trond.myklebust@hammerspace.com> stable inclusion from stable-v5.10.145 commit 4d065f83565858fd433e1abbda2fc0fda3ac4a87 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2a9d683b48c8a87e61a4215792d44c90bcbbb536 ] The NFSv4.0 protocol only supports open() by name. It cannot therefore be used with open_by_handle() and friends, nor can it be re-exported by knfsd. Reported-by: Chuck Lever III <chuck.lever@oracle.com> Fixes: 20fa19027286 ("nfs: add export operations") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/nfs/super.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 4034102010f0..b3fcc27b9564 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1029,22 +1029,31 @@ static void nfs_fill_super(struct super_block *sb, struct nfs_fs_context *ctx) if (ctx && ctx->bsize) sb->s_blocksize = nfs_block_size(ctx->bsize, &sb->s_blocksize_bits); - if (server->nfs_client->rpc_ops->version != 2) { - /* The VFS shouldn't apply the umask to mode bits. We will do - * so ourselves when necessary. + switch (server->nfs_client->rpc_ops->version) { + case 2: + sb->s_time_gran = 1000; + sb->s_time_min = 0; + sb->s_time_max = U32_MAX; + break; + case 3: + /* + * The VFS shouldn't apply the umask to mode bits. + * We will do so ourselves when necessary. */ sb->s_flags |= SB_POSIXACL; sb->s_time_gran = 1; - sb->s_export_op = &nfs_export_ops; - } else - sb->s_time_gran = 1000; - - if (server->nfs_client->rpc_ops->version != 4) { sb->s_time_min = 0; sb->s_time_max = U32_MAX; - } else { + sb->s_export_op = &nfs_export_ops; + break; + case 4: + sb->s_flags |= SB_POSIXACL; + sb->s_time_gran = 1; sb->s_time_min = S64_MIN; sb->s_time_max = S64_MAX; + if (server->caps & NFS_CAP_ATOMIC_OPEN_V1) + sb->s_export_op = &nfs_export_ops; + break; } sb->s_magic = NFS_SUPER_MAGIC; -- 2.25.1
From: Pali Rohár <pali@kernel.org> stable inclusion from stable-v5.10.145 commit 24196210b198e8e39296e277bb93b362aa207775 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ] Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio"). Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work: [ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8) [ 15.267168] lm90 0-004c: cannot request IRQ 49 [ 15.272708] lm90: probe of 0-004c failed with error -22 Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpio/gpio-mpc8xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index d60d5520707d..60c2533a39a5 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -169,6 +169,7 @@ static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type) switch (flow_type) { case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR, gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR) -- 2.25.1
From: Stuart Menefy <stuart.menefy@mathembedded.com> stable inclusion from stable-v5.10.145 commit 4d3d2e384b227cb2020d760cdddf8ab3a545b4a5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 6836829c8ea453c9e3e518e61539e35881c8ed5f ] VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum value is 0x100 not 0xff. This matches the vendor kernel. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220908155103.686904-1-stuart... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/meson/meson_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c index 35338ed18209..255c6b863f8d 100644 --- a/drivers/gpu/drm/meson/meson_plane.c +++ b/drivers/gpu/drm/meson/meson_plane.c @@ -163,7 +163,7 @@ static void meson_plane_atomic_update(struct drm_plane *plane, /* Enable OSD and BLK0, set max global alpha */ priv->viu.osd1_ctrl_stat = OSD_ENABLE | - (0xFF << OSD_GLOBAL_ALPHA_SHIFT) | + (0x100 << OSD_GLOBAL_ALPHA_SHIFT) | OSD_BLK0_ENABLE; priv->viu.osd1_ctrl_stat2 = readl(priv->io_base + -- 2.25.1
From: Stuart Menefy <stuart.menefy@mathembedded.com> stable inclusion from stable-v5.10.145 commit 1f24b0a7ca41433c8f8c49c2398fde1129454bfa category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 6463d3930ba5b6addcfc8f80a4543976a2fc7656 ] VPP_WRAP_OSD1_MATRIX_COEF22.Coeff22 is documented as being bits 0-12, not 16-28. Without this the output tends to have a pink hue, changing it results in better color accuracy. The vendor kernel doesn't use this register. However the code which sets VIU2_OSD1_MATRIX_COEF22 also uses bits 0-12. There is a slightly different style of registers for configuring some of the other matrices, which do use bits 16-28 for this coefficient, but those have names ending in MATRIX_COEF22_30, and this is not one of those. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220908155243.687143-1-stuart... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/meson/meson_viu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c index bb7e109534de..d4b907889a21 100644 --- a/drivers/gpu/drm/meson/meson_viu.c +++ b/drivers/gpu/drm/meson/meson_viu.c @@ -94,7 +94,7 @@ static void meson_viu_set_g12a_osd1_matrix(struct meson_drm *priv, priv->io_base + _REG(VPP_WRAP_OSD1_MATRIX_COEF11_12)); writel(((m[9] & 0x1fff) << 16) | (m[10] & 0x1fff), priv->io_base + _REG(VPP_WRAP_OSD1_MATRIX_COEF20_21)); - writel((m[11] & 0x1fff) << 16, + writel((m[11] & 0x1fff), priv->io_base + _REG(VPP_WRAP_OSD1_MATRIX_COEF22)); writel(((m[18] & 0xfff) << 16) | (m[19] & 0xfff), -- 2.25.1
From: Yang Yingliang <yangyingliang@huawei.com> stable inclusion from stable-v5.10.145 commit 65dd251c516d200456e5c92398966223adfa21b3 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 38238be4e881a5d0abbe4872b4cd6ed790be06c8 ] Add missing iounmap() before return from ccio_probe(), if ccio_init_resources() fails. Fixes: d46c742f827f ("parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/parisc/ccio-dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index ffd5000c23d3..be81b765858b 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1546,6 +1546,7 @@ static int __init ccio_probe(struct parisc_device *dev) } ccio_ioc_init(ioc); if (ccio_init_resources(ioc)) { + iounmap(ioc->ioc_regs); kfree(ioc); return -ENOMEM; } -- 2.25.1
From: Yipeng Zou <zouyipeng@huawei.com> stable inclusion from stable-v5.10.145 commit 6a27acda3d6a8b388ca87868b30e1fcb05e2c18f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 54c3931957f6a6194d5972eccc36d052964b2abe ] Currently, The arguments passing to lockdep_hardirqs_{on,off} was fixed in CALLER_ADDR0. The function trace_hardirqs_on_caller should have been intended to use caller_addr to represent the address that caller wants to be traced. For example, lockdep log in riscv showing the last {enabled,disabled} at __trace_hardirqs_{on,off} all the time(if called by): [ 57.853175] hardirqs last enabled at (2519): __trace_hardirqs_on+0xc/0x14 [ 57.853848] hardirqs last disabled at (2520): __trace_hardirqs_off+0xc/0x14 After use trace_hardirqs_xx_caller, we can get more effective information: [ 53.781428] hardirqs last enabled at (2595): restore_all+0xe/0x66 [ 53.782185] hardirqs last disabled at (2596): ret_from_exception+0xa/0x10 Link: https://lkml.kernel.org/r/20220901104515.135162-2-zouyipeng@huawei.com Cc: stable@vger.kernel.org Fixes: c3bc8fd637a96 ("tracing: Centralize preemptirq tracepoints and unify their usage") Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- kernel/trace/trace_preemptirq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace_preemptirq.c b/kernel/trace/trace_preemptirq.c index f4938040c228..3aa55b807560 100644 --- a/kernel/trace/trace_preemptirq.c +++ b/kernel/trace/trace_preemptirq.c @@ -94,15 +94,15 @@ __visible void trace_hardirqs_on_caller(unsigned long caller_addr) this_cpu_write(tracing_irq_cpu, 0); } - lockdep_hardirqs_on_prepare(CALLER_ADDR0); - lockdep_hardirqs_on(CALLER_ADDR0); + lockdep_hardirqs_on_prepare(caller_addr); + lockdep_hardirqs_on(caller_addr); } EXPORT_SYMBOL(trace_hardirqs_on_caller); NOKPROBE_SYMBOL(trace_hardirqs_on_caller); __visible void trace_hardirqs_off_caller(unsigned long caller_addr) { - lockdep_hardirqs_off(CALLER_ADDR0); + lockdep_hardirqs_off(caller_addr); if (!this_cpu_read(tracing_irq_cpu)) { this_cpu_write(tracing_irq_cpu, 1); -- 2.25.1
From: Thierry Reding <treding@nvidia.com> stable inclusion from stable-v5.10.145 commit a9398cb81cdc8464a308e7022d791d99dbf6480a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 40bfe7a86d84cf08ac6a8fe2f0c8bf7a43edd110 upstream. Since the stub version of of_dma_configure_id() was added in commit a081bd4af4ce ("of/device: Add input id to of_dma_configure()"), it has not matched the signature of the full function, leading to build failure reports when code using this function is built on !OF configurations. Fixes: a081bd4af4ce ("of/device: Add input id to of_dma_configure()") Cc: stable@vger.kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Link: https://lore.kernel.org/r/20220824153256.1437483-1-thierry.reding@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- include/linux/of_device.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/of_device.h b/include/linux/of_device.h index 07ca187fc5e4..fe339106e02c 100644 --- a/include/linux/of_device.h +++ b/include/linux/of_device.h @@ -113,8 +113,9 @@ static inline struct device_node *of_cpu_device_node_get(int cpu) } static inline int of_dma_configure_id(struct device *dev, - struct device_node *np, - bool force_dma) + struct device_node *np, + bool force_dma, + const u32 *id) { return 0; } -- 2.25.1
From: Ronnie Sahlberg <lsahlber@redhat.com> stable inclusion from stable-v5.10.145 commit f3fbd08e7ca36e4b43a257d55e99258f8b67b156 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 7500a99281dfed2d4a84771c933bcb9e17af279b upstream. Kernel bugzilla: 216301 When doing direct writes we need to also invalidate the mapping in case we have a cached copy of the affected page(s) in memory or else subsequent reads of the data might return the old/stale content before we wrote an update to the server. Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/cifs/file.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 6c06870f9018..fafb69d338c2 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3244,6 +3244,9 @@ static ssize_t __cifs_writev( ssize_t cifs_direct_writev(struct kiocb *iocb, struct iov_iter *from) { + struct file *file = iocb->ki_filp; + + cifs_revalidate_mapping(file->f_inode); return __cifs_writev(iocb, from, true); } -- 2.25.1
From: Stefan Metzmacher <metze@samba.org> stable inclusion from stable-v5.10.145 commit 331eba80cbd70bfd11c0608a3adadbaa6b05f869 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 17d3df38dc5f4cec9b0ac6eb79c1859b6e2693a4 upstream. This is ignored anyway by the tcp layer. Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/cifs/transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 503a0056b60f..383ae8744c33 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -209,8 +209,8 @@ smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, *sent = 0; - smb_msg->msg_name = (struct sockaddr *) &server->dstaddr; - smb_msg->msg_namelen = sizeof(struct sockaddr); + smb_msg->msg_name = NULL; + smb_msg->msg_namelen = 0; smb_msg->msg_control = NULL; smb_msg->msg_controllen = 0; if (server->noblocksnd) -- 2.25.1
From: Ben Hutchings <benh@debian.org> stable inclusion from stable-v5.10.145 commit f63ddf62d0c837ebc64dce3d3ce4e7f5ce94074d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 95363747a6f39e88a3052fcf6ce6237769495ce0 upstream. tools/include/uapi/asm/errno.h currently attempts to include non-existent arch-specific errno.h header for xtensa. Remove this case so that <asm-generic/errno.h> is used instead, and add the missing arch-specific header for parisc. References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=ia64&ver=5.8.3-1%7... Signed-off-by: Ben Hutchings <benh@debian.org> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Cc: <stable@vger.kernel.org> # 5.10+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Conflicts: tools/include/uapi/asm/errno.h Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> --- tools/include/uapi/asm/errno.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/include/uapi/asm/errno.h b/tools/include/uapi/asm/errno.h index 32e1e4668d88..c9d951704423 100644 --- a/tools/include/uapi/asm/errno.h +++ b/tools/include/uapi/asm/errno.h @@ -11,8 +11,8 @@ #include "../../../arch/mips/include/uapi/asm/errno.h" #elif defined(__sw_64__) #include "../../../arch/sw_64/include/uapi/asm/errno.h" -#elif defined(__xtensa__) -#include "../../../arch/xtensa/include/uapi/asm/errno.h" +#elif defined(__hppa__) +#include "../../../arch/parisc/include/uapi/asm/errno.h" #else #include <asm-generic/errno.h> #endif -- 2.25.1
From: Johan Hovold <johan@kernel.org> stable inclusion from stable-v5.10.145 commit 107c6b60582c99820916b19183b5c855e2d60434 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit d02b006b29de14968ba4afa998bede0d55469e29 upstream. This reverts commit 32262e2e429cdb31f9e957e997d53458762931b7. The commit in question claims to determine the inverse of serial8250_get_divisor() but failed to notice that some drivers override the default implementation using a get_divisor() callback. This means that the computed line-speed values can be completely wrong and results in regular TCSETS requests failing (the incorrect values would also be passed to any overridden set_divisor() callback). Similarly, it also failed to honour the old (deprecated) ASYNC_SPD_FLAGS and would break applications relying on those when re-encoding the actual line speed. There are also at least two quirks, UART_BUG_QUOT and an OMAP1510 workaround, which were happily ignored and that are now broken. Finally, even if the offending commit were to be implemented correctly, this is a new feature and not something which should be backported to stable. Cc: Pali Rohár <pali@kernel.org> Fixes: 32262e2e429c ("serial: 8250: Fix reporting real baudrate value in c_ospeed field") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211007133146.28949-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/serial/8250/8250_port.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index eaf4eb33a78d..9d60418e4adb 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2547,19 +2547,6 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, return serial8250_do_get_divisor(port, baud, frac); } -static unsigned int serial8250_compute_baud_rate(struct uart_port *port, - unsigned int quot) -{ - if ((port->flags & UPF_MAGIC_MULTIPLIER) && quot == 0x8001) - return port->uartclk / 4; - else if ((port->flags & UPF_MAGIC_MULTIPLIER) && quot == 0x8002) - return port->uartclk / 8; - else if (port->type == PORT_NPCM) - return DIV_ROUND_CLOSEST(port->uartclk - 2 * (quot + 2), 16 * (quot + 2)); - else - return DIV_ROUND_CLOSEST(port->uartclk, 16 * quot); -} - static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, tcflag_t c_cflag) { @@ -2701,14 +2688,11 @@ void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) baud = serial8250_get_baud_rate(port, termios, NULL); quot = serial8250_get_divisor(port, baud, &frac); - baud = serial8250_compute_baud_rate(port, quot); serial8250_rpm_get(up); spin_lock_irqsave(&port->lock, flags); uart_update_timeout(port, termios->c_cflag, baud); - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, baud, baud); serial8250_set_divisor(port, baud, quot, frac); serial_port_out(port, UART_LCR, up->lcr); @@ -2742,7 +2726,6 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, baud = serial8250_get_baud_rate(port, termios, old); quot = serial8250_get_divisor(port, baud, &frac); - baud = serial8250_compute_baud_rate(port, quot); /* * Ok, we're now changing the port state. Do it with -- 2.25.1
From: Takashi Iwai <tiwai@suse.de> stable inclusion from stable-v5.10.145 commit c2ef959e33b2234bb9fc02e8120390fbb9ea8f20 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 5628560e90395d3812800a8e44a01c32ffa429ec ] The semaphore of nau8824 wasn't properly unlocked at some error handling code paths, hence this may result in the unbalance (and potential lock-up). Fix them to handle the semaphore up properly. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/soc/codecs/nau8824.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index c8ccfa2fff84..a95fe3fff1db 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -1072,6 +1072,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, struct snd_soc_component *component = dai->component; struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component); unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div; + int err = -EINVAL; nau8824_sema_acquire(nau8824, HZ); @@ -1088,7 +1089,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_DAC_OVERSAMPLE_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_DAC_SRC_MASK, osr_dac_sel[osr].clk_src << NAU8824_CLK_DAC_SRC_SFT); @@ -1098,7 +1099,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_ADC_SYNC_DOWN_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_ADC_SRC_MASK, osr_adc_sel[osr].clk_src << NAU8824_CLK_ADC_SRC_SFT); @@ -1119,7 +1120,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, else if (bclk_fs <= 256) bclk_div = 0; else - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_2, NAU8824_I2S_LRC_DIV_MASK | NAU8824_I2S_BLK_DIV_MASK, @@ -1140,15 +1141,17 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, val_len |= NAU8824_I2S_DL_32; break; default: - return -EINVAL; + goto error; } regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DL_MASK, val_len); + err = 0; + error: nau8824_sema_release(nau8824); - return 0; + return err; } static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) @@ -1157,8 +1160,6 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component); unsigned int ctrl1_val = 0, ctrl2_val = 0; - nau8824_sema_acquire(nau8824, HZ); - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: ctrl2_val |= NAU8824_I2S_MS_MASTER; @@ -1200,6 +1201,8 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; } + nau8824_sema_acquire(nau8824, HZ); + regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DF_MASK | NAU8824_I2S_BP_MASK | NAU8824_I2S_PCMB_EN, ctrl1_val); -- 2.25.1
From: Xiaolei Wang <xiaolei.wang@windriver.com> stable inclusion from stable-v5.10.145 commit 891d5c46f282a8d0d9ab2b2059816fa636d69f85 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 78e1e867f44e6bdc72c0e6a2609a3407642fb30b ] The pfuze_chip::regulator_descs is an array of size PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators is the pointer to the real regulators of a specific device. The number of real regulator is supposed to be less than the PFUZE100_MAX_REGULATOR, so we should use the size of 'regulator_num * sizeof(struct pfuze_regulator)' in memcpy(). This fixes the out of bounds access bug reported by KASAN. Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://lore.kernel.org/r/20220825111922.1368055-1-xiaolei.wang@windriver.co... Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/regulator/pfuze100-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 0a19500d3725..44a8e500fb30 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -791,7 +791,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, ((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001")))); memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, - sizeof(pfuze_chip->regulator_descs)); + regulator_num * sizeof(struct pfuze_regulator)); ret = pfuze_parse_regulators_dt(pfuze_chip); if (ret) -- 2.25.1
From: David Howells <dhowells@redhat.com> stable inclusion from stable-v5.10.145 commit 35da670ed13ee161a9c943b839469fb3baf0e8fd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d3d863036d688313f8d566b87acd7d99daf82749 ] If the local processor work item for the rxrpc local endpoint gets requeued by an event (such as an incoming packet) between it getting scheduled for destruction and the UDP socket being closed, the rxrpc_local_destroyer() function can get run twice. The second time it can hang because it can end up waiting for cleanup events that will never happen. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/rxrpc/local_object.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/rxrpc/local_object.c b/net/rxrpc/local_object.c index 8c2881054266..ebbf1b03b62c 100644 --- a/net/rxrpc/local_object.c +++ b/net/rxrpc/local_object.c @@ -424,6 +424,9 @@ static void rxrpc_local_processor(struct work_struct *work) container_of(work, struct rxrpc_local, processor); bool again; + if (local->dead) + return; + trace_rxrpc_local(local->debug_id, rxrpc_local_processing, atomic_read(&local->usage), NULL); -- 2.25.1
From: David Howells <dhowells@redhat.com> stable inclusion from stable-v5.10.145 commit c505fee07b3dbe24054fc54f9d3f0a73003d27b5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 214a9dc7d852216e83acac7b75bc18f01ce184c2 ] Fix the calculation of the resend age to add a microsecond value as microseconds, not nanoseconds. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/rxrpc/call_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c index f8ecad2b730e..2a93e7b5fbd0 100644 --- a/net/rxrpc/call_event.c +++ b/net/rxrpc/call_event.c @@ -166,7 +166,7 @@ static void rxrpc_resend(struct rxrpc_call *call, unsigned long now_j) _enter("{%d,%d}", call->tx_hard_ack, call->tx_top); now = ktime_get_real(); - max_age = ktime_sub(now, jiffies_to_usecs(call->peer->rto_j)); + max_age = ktime_sub_us(now, jiffies_to_usecs(call->peer->rto_j)); spin_lock_bh(&call->lock); -- 2.25.1
From: Soenke Huster <soenke.huster@eknoes.de> stable inclusion from stable-v5.10.145 commit b95a5ef4c05453de9765eb83a35c482bc2cd9064 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8c0427842aaef161a38ac83b7e8d8fe050b4be04 ] An invalid packet with a length shorter than the specified length in the netlink header can lead to use-after-frees and slab-out-of-bounds in the processing of the netlink attributes, such as the following: BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010 Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12 Workqueue: events hwsim_virtio_rx_work Call Trace: <TASK> dump_stack_lvl+0x45/0x5d print_report.cold+0x5e/0x5e5 kasan_report+0xb1/0x1c0 __nla_validate_parse+0x1258/0x2010 __nla_parse+0x22/0x30 hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0 hwsim_virtio_rx_work+0x1b2/0x370 process_one_work+0x8df/0x1530 worker_thread+0x575/0x11a0 kthread+0x29d/0x340 ret_from_fork+0x22/0x30 </TASK> Discarding packets with an invalid length solves this. Therefore, skb->len must be set at reception. Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6 Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/wireless/mac80211_hwsim.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index fb331930be4f..188f907dcd13 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -4209,6 +4209,10 @@ static int hwsim_virtio_handle_cmd(struct sk_buff *skb) nlh = nlmsg_hdr(skb); gnlh = nlmsg_data(nlh); + + if (skb->len < nlh->nlmsg_len) + return -EINVAL; + err = genlmsg_parse(nlh, &hwsim_genl_family, tb, HWSIM_ATTR_MAX, hwsim_genl_policy, NULL); if (err) { @@ -4251,7 +4255,8 @@ static void hwsim_virtio_rx_work(struct work_struct *work) spin_unlock_irqrestore(&hwsim_virtio_lock, flags); skb->data = skb->head; - skb_set_tail_pointer(skb, len); + skb_reset_tail_pointer(skb); + skb_put(skb, len); hwsim_virtio_handle_cmd(skb); spin_lock_irqsave(&hwsim_virtio_lock, flags); -- 2.25.1
From: Takashi Iwai <tiwai@suse.de> stable inclusion from stable-v5.10.145 commit e41b97a27780072584909f461e6de9cb5e6769a3 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ] It seems that the beep playback doesn't work well on IDT codec devices when the codec auto-pm is enabled. Keep the power on while the beep switch is enabled. Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544 Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_sigmatel.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index c662431bf13a..e9d0b0a30b99 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -209,6 +209,7 @@ struct sigmatel_spec { /* beep widgets */ hda_nid_t anabeep_nid; + bool beep_power_on; /* SPDIF-out mux */ const char * const *spdif_labels; @@ -4447,6 +4448,26 @@ static int stac_suspend(struct hda_codec *codec) stac_shutup(codec); return 0; } + +static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid) +{ + struct sigmatel_spec *spec = codec->spec; + int ret = snd_hda_gen_check_power_status(codec, nid); + +#ifdef CONFIG_SND_HDA_INPUT_BEEP + if (nid == spec->gen.beep_nid && codec->beep) { + if (codec->beep->enabled != spec->beep_power_on) { + spec->beep_power_on = codec->beep->enabled; + if (spec->beep_power_on) + snd_hda_power_up_pm(codec); + else + snd_hda_power_down_pm(codec); + } + ret |= spec->beep_power_on; + } +#endif + return ret; +} #else #define stac_suspend NULL #endif /* CONFIG_PM */ @@ -4459,6 +4480,7 @@ static const struct hda_codec_ops stac_patch_ops = { .unsol_event = snd_hda_jack_unsol_event, #ifdef CONFIG_PM .suspend = stac_suspend, + .check_power_status = stac_check_power_status, #endif .reboot_notify = stac_shutup, }; -- 2.25.1
From: Mohan Kumar <mkumard@nvidia.com> stable inclusion from stable-v5.10.145 commit a36fd2d8d69cca7a961f06c97cf2331165e40822 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8d44e6044a0e885acdd01813768a0b27906d64fd ] AZA HW may send a burst read/write request crossing 4K memory boundary. The 4KB boundary is not guaranteed by Tegra HDA HW. Make SW change to include the flag AZX_DCAPS_4K_BDLE_BOUNDARY to align BDLE to 4K boundary. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Link: https://lore.kernel.org/r/20220905172420.3801-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/hda_tegra.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index 07787698b973..1e44e337986e 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -479,7 +479,8 @@ MODULE_DEVICE_TABLE(of, hda_tegra_match); static int hda_tegra_probe(struct platform_device *pdev) { const unsigned int driver_flags = AZX_DCAPS_CORBRP_SELF_CLEAR | - AZX_DCAPS_PM_RUNTIME; + AZX_DCAPS_PM_RUNTIME | + AZX_DCAPS_4K_BDLE_BOUNDARY; struct snd_card *card; struct azx *chip; struct hda_tegra *hda; -- 2.25.1
From: "jerry.meng" <jerry-meng@foxmail.com> stable inclusion from stable-v5.10.145 commit 517a0324db6e639f4f558249268fa23371ec9a8d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ] add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng <jerry-meng@foxmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.co... Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 48e8b94e4a7c..1502069f3a4e 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1024,6 +1024,7 @@ static const struct usb_device_id products[] = { {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)}, /* Quectel EG12/EM12 */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)}, /* Quectel EM160R-GL */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)}, /* Quectel RM500Q-GL */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0801)}, /* Quectel RM520N */ /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ -- 2.25.1
From: David Howells <dhowells@redhat.com> stable inclusion from stable-v5.10.145 commit 72602bc62013fa1a41dc931aeed34e78c63fd2e7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0066f1b0e27556381402db3ff31f85d2a2265858 ] When trying to get a file lock on an AFS file, the server may return UAEAGAIN to indicate that the lock is already held. This is currently translated by the default path to -EREMOTEIO. Translate it instead to -EAGAIN so that we know we can retry it. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey E Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@war... Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/afs/misc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/afs/misc.c b/fs/afs/misc.c index 1d1a8debe472..f1dc2162900a 100644 --- a/fs/afs/misc.c +++ b/fs/afs/misc.c @@ -69,6 +69,7 @@ int afs_abort_to_error(u32 abort_code) /* Unified AFS error table */ case UAEPERM: return -EPERM; case UAENOENT: return -ENOENT; + case UAEAGAIN: return -EAGAIN; case UAEACCES: return -EACCES; case UAEBUSY: return -EBUSY; case UAEEXIST: return -EEXIST; -- 2.25.1
From: Alexander Sverdlin <alexander.sverdlin@nokia.com> stable inclusion from stable-v5.10.145 commit 3e6d2eff56611d03b0933951b11db6146790af60 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ] For irq_domain_associate() to work the virq descriptor has to be pre-allocated in advance. Otherwise the following happens: WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8 error: virq128 is not allocated Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1 ... Call Trace: [<ffffffff801344c4>] show_stack+0x9c/0x130 [<ffffffff80769550>] dump_stack+0x90/0xd0 [<ffffffff801576d0>] __warn+0x118/0x130 [<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70 [<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8 [<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c [<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388 [<ffffffff80a452cc>] init_IRQ+0x4c/0xf4 [<ffffffff80a3cc00>] start_kernel+0x404/0x698 Use irq_alloc_desc_at() to avoid the above problem. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/mips/cavium-octeon/octeon-irq.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 6501a842c41a..191bcaf56513 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -127,6 +127,16 @@ static void octeon_irq_free_cd(struct irq_domain *d, unsigned int irq) static int octeon_irq_force_ciu_mapping(struct irq_domain *domain, int irq, int line, int bit) { + struct device_node *of_node; + int ret; + + of_node = irq_domain_get_of_node(domain); + if (!of_node) + return -EINVAL; + ret = irq_alloc_desc_at(irq, of_node_to_nid(of_node)); + if (ret < 0) + return ret; + return irq_domain_associate(domain, irq, line << 6 | bit); } -- 2.25.1
From: Youling Tang <tangyouling@loongson.cn> stable inclusion from stable-v5.10.145 commit 3fefe614ed802ab5bb383e32a0686333bd5e6fb7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c17a2538704f926ee4d167ba625e09b1040d8439 ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, we need to filter "L0" symbols in LoongArch architecture. $ cat System.map | grep L0 9000000000221540 t L0 The L0 symbol exists in System.map, but not in .tmp_System.map. When "cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms data" error message in link-vmlinux.sh script. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- scripts/mksysmap | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/mksysmap b/scripts/mksysmap index 9aa23d15862a..ad8bbc52267d 100755 --- a/scripts/mksysmap +++ b/scripts/mksysmap @@ -41,4 +41,4 @@ # so we just ignore them to let readprofile continue to work. # (At least sparc64 has __crc_ in the middle). -$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)' > $2 +$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)\|\( L0\)' > $2 -- 2.25.1
From: Takashi Iwai <tiwai@suse.de> stable inclusion from stable-v5.10.145 commit ca5539d421647d66c1d0076c4771a6a830074237 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 51bdc8bb82525cd70feb92279c8b7660ad7948dd upstream. The newly added stac_check_power_status() caused a compile warning when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it. Fixes: 414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index e9d0b0a30b99..b848e435b93f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4451,7 +4451,9 @@ static int stac_suspend(struct hda_codec *codec) static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid) { +#ifdef CONFIG_SND_HDA_INPUT_BEEP struct sigmatel_spec *spec = codec->spec; +#endif int ret = snd_hda_gen_check_power_status(codec, nid); #ifdef CONFIG_SND_HDA_INPUT_BEEP -- 2.25.1
From: Alex Deucher <alexander.deucher@amd.com> stable inclusion from stable-v5.10.146 commit 9f55f36f749a7608eeef57d7d72991a9bd557341 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e3163bc8ffdfdb405e10530b140135b2ee487f89 ] This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 5 +++++ drivers/gpu/drm/amd/amdgpu/soc15.c | 25 ------------------------- 2 files changed, 5 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c index 1f2e2460e121..a1a8e026b9fa 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c @@ -1475,6 +1475,11 @@ static int sdma_v4_0_start(struct amdgpu_device *adev) WREG32_SDMA(i, mmSDMA0_CNTL, temp); if (!amdgpu_sriov_vf(adev)) { + ring = &adev->sdma.instance[i].ring; + adev->nbio.funcs->sdma_doorbell_range(adev, i, + ring->use_doorbell, ring->doorbell_index, + adev->doorbell_index.sdma_doorbell_range); + /* unhalt engine */ temp = RREG32_SDMA(i, mmSDMA0_F32_CNTL); temp = REG_SET_FIELD(temp, SDMA0_F32_CNTL, HALT, 0); diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index 7212b9900e0a..abd649285a22 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -1332,25 +1332,6 @@ static int soc15_common_sw_fini(void *handle) return 0; } -static void soc15_doorbell_range_init(struct amdgpu_device *adev) -{ - int i; - struct amdgpu_ring *ring; - - /* sdma/ih doorbell range are programed by hypervisor */ - if (!amdgpu_sriov_vf(adev)) { - for (i = 0; i < adev->sdma.num_instances; i++) { - ring = &adev->sdma.instance[i].ring; - adev->nbio.funcs->sdma_doorbell_range(adev, i, - ring->use_doorbell, ring->doorbell_index, - adev->doorbell_index.sdma_doorbell_range); - } - - adev->nbio.funcs->ih_doorbell_range(adev, adev->irq.ih.use_doorbell, - adev->irq.ih.doorbell_index); - } -} - static int soc15_common_hw_init(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; @@ -1370,12 +1351,6 @@ static int soc15_common_hw_init(void *handle) /* enable the doorbell aperture */ soc15_enable_doorbell_aperture(adev, true); - /* HW doorbell routing policy: doorbell writing not - * in SDMA/IH/MM/ACV range will be routed to CP. So - * we need to init SDMA/IH/MM/ACV doorbell range prior - * to CP ip block init and ring test. - */ - soc15_doorbell_range_init(adev); return 0; } -- 2.25.1
From: Peng Ju Zhou <PengJu.Zhou@amd.com> stable inclusion from stable-v5.10.146 commit 87a4e51fb8d6de643851c376a8ee9239d94f303c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8b8a162da820d48bb94261ae4684f2c839ce148c ] unify host driver and guest driver indirect access control bits names Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com> Reviewed-by: Emily.Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 5 +++++ drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 8 ++++++++ 2 files changed, 13 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index f262c4e7a48a..a5f9f51cf583 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2047,6 +2047,11 @@ static int amdgpu_device_ip_early_init(struct amdgpu_device *adev) amdgpu_vf_error_put(adev, AMDGIM_ERROR_VF_ATOMBIOS_INIT_FAIL, 0, 0); return r; } + + /*get pf2vf msg info at it's earliest time*/ + if (amdgpu_sriov_vf(adev)) + amdgpu_virt_init_data_exchange(adev); + } } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c index e7678ba8fdcf..d17bd0140bf6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c @@ -615,6 +615,14 @@ void amdgpu_virt_init_data_exchange(struct amdgpu_device *adev) if (adev->virt.ras_init_done) amdgpu_virt_add_bad_page(adev, bp_block_offset, bp_block_size); } + } else if (adev->bios != NULL) { + adev->virt.fw_reserve.p_pf2vf = + (struct amd_sriov_msg_pf2vf_info_header *) + (adev->bios + (AMD_SRIOV_MSG_PF2VF_OFFSET_KB << 10)); + + amdgpu_virt_read_pf2vf_data(adev); + + return; } if (adev->virt.vf2pf_update_interval_ms != 0) { -- 2.25.1
From: Victor Skvortsov <victor.skvortsov@amd.com> stable inclusion from stable-v5.10.146 commit 9d18013dac863377c5a2acc27eebcbfb4450df5c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 892deb48269c65376f3eeb5b4c032ff2c2979bd7 ] We want to be able to call virt data exchange conditionally after gmc sw init to reserve bad pages as early as possible. Since this is a conditional call, we will need to call it again unconditionally later in the init sequence. Refactor the data exchange function so it can be called multiple times without re-initializing the work item. v2: Cleaned up the code. Kept the original call to init_exchange_data() inside early init to initialize the work item, afterwards call exchange_data() when needed. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed By: Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 6 +++- drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 36 ++++++++++++++-------- drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h | 1 + 3 files changed, 30 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index a5f9f51cf583..9ccc8c82353b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2181,6 +2181,10 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev) /* need to do gmc hw init early so we can allocate gpu mem */ if (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GMC) { + /* Try to reserve bad pages early */ + if (amdgpu_sriov_vf(adev)) + amdgpu_virt_exchange_data(adev); + r = amdgpu_device_vram_scratch_init(adev); if (r) { DRM_ERROR("amdgpu_vram_scratch_init failed %d\n", r); @@ -2212,7 +2216,7 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev) } if (amdgpu_sriov_vf(adev)) - amdgpu_virt_init_data_exchange(adev); + amdgpu_virt_exchange_data(adev); r = amdgpu_ib_pool_init(adev); if (r) { diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c index d17bd0140bf6..5217eadd7214 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c @@ -580,17 +580,35 @@ void amdgpu_virt_fini_data_exchange(struct amdgpu_device *adev) void amdgpu_virt_init_data_exchange(struct amdgpu_device *adev) { - uint64_t bp_block_offset = 0; - uint32_t bp_block_size = 0; - struct amd_sriov_msg_pf2vf_info *pf2vf_v2 = NULL; - adev->virt.fw_reserve.p_pf2vf = NULL; adev->virt.fw_reserve.p_vf2pf = NULL; adev->virt.vf2pf_update_interval_ms = 0; - if (adev->mman.fw_vram_usage_va != NULL) { + if (adev->bios != NULL) { adev->virt.vf2pf_update_interval_ms = 2000; + adev->virt.fw_reserve.p_pf2vf = + (struct amd_sriov_msg_pf2vf_info_header *) + (adev->bios + (AMD_SRIOV_MSG_PF2VF_OFFSET_KB << 10)); + + amdgpu_virt_read_pf2vf_data(adev); + } + + if (adev->virt.vf2pf_update_interval_ms != 0) { + INIT_DELAYED_WORK(&adev->virt.vf2pf_work, amdgpu_virt_update_vf2pf_work_item); + schedule_delayed_work(&(adev->virt.vf2pf_work), msecs_to_jiffies(adev->virt.vf2pf_update_interval_ms)); + } +} + + +void amdgpu_virt_exchange_data(struct amdgpu_device *adev) +{ + uint64_t bp_block_offset = 0; + uint32_t bp_block_size = 0; + struct amd_sriov_msg_pf2vf_info *pf2vf_v2 = NULL; + + if (adev->mman.fw_vram_usage_va != NULL) { + adev->virt.fw_reserve.p_pf2vf = (struct amd_sriov_msg_pf2vf_info_header *) (adev->mman.fw_vram_usage_va + (AMD_SRIOV_MSG_PF2VF_OFFSET_KB << 10)); @@ -621,16 +639,10 @@ void amdgpu_virt_init_data_exchange(struct amdgpu_device *adev) (adev->bios + (AMD_SRIOV_MSG_PF2VF_OFFSET_KB << 10)); amdgpu_virt_read_pf2vf_data(adev); - - return; - } - - if (adev->virt.vf2pf_update_interval_ms != 0) { - INIT_DELAYED_WORK(&adev->virt.vf2pf_work, amdgpu_virt_update_vf2pf_work_item); - schedule_delayed_work(&(adev->virt.vf2pf_work), adev->virt.vf2pf_update_interval_ms); } } + void amdgpu_detect_virtualization(struct amdgpu_device *adev) { uint32_t reg; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h index 8dd624c20f89..77b9d37bfa1b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.h @@ -271,6 +271,7 @@ int amdgpu_virt_alloc_mm_table(struct amdgpu_device *adev); void amdgpu_virt_free_mm_table(struct amdgpu_device *adev); void amdgpu_virt_release_ras_err_handler_data(struct amdgpu_device *adev); void amdgpu_virt_init_data_exchange(struct amdgpu_device *adev); +void amdgpu_virt_exchange_data(struct amdgpu_device *adev); void amdgpu_virt_fini_data_exchange(struct amdgpu_device *adev); void amdgpu_detect_virtualization(struct amdgpu_device *adev); -- 2.25.1
From: Alex Deucher <alexander.deucher@amd.com> stable inclusion from stable-v5.10.146 commit 7b0db849ea030a70b8fb9c9afec67c81f955482e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit a8671493d2074950553da3cf07d1be43185ef6c6 ] Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 9ccc8c82353b..f44ab44abd64 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2179,8 +2179,16 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev) } adev->ip_blocks[i].status.sw = true; - /* need to do gmc hw init early so we can allocate gpu mem */ - if (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GMC) { + if (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_COMMON) { + /* need to do common hw init early so everything is set up for gmc */ + r = adev->ip_blocks[i].version->funcs->hw_init((void *)adev); + if (r) { + DRM_ERROR("hw_init %d failed %d\n", i, r); + goto init_failed; + } + adev->ip_blocks[i].status.hw = true; + } else if (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GMC) { + /* need to do gmc hw init early so we can allocate gpu mem */ /* Try to reserve bad pages early */ if (amdgpu_sriov_vf(adev)) amdgpu_virt_exchange_data(adev); @@ -2762,8 +2770,8 @@ static int amdgpu_device_ip_reinit_early_sriov(struct amdgpu_device *adev) int i, r; static enum amd_ip_block_type ip_order[] = { - AMD_IP_BLOCK_TYPE_GMC, AMD_IP_BLOCK_TYPE_COMMON, + AMD_IP_BLOCK_TYPE_GMC, AMD_IP_BLOCK_TYPE_PSP, AMD_IP_BLOCK_TYPE_IH, }; -- 2.25.1
From: Azhar Shaikh <azhar.shaikh@intel.com> stable inclusion from stable-v5.10.146 commit c267bb83340e1831bfa30521deee6d82b09daaa4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit ca5ce82529104e96ccc5e1888979258e233e1644 ] Intel AlderLake(ADL) IOM has a different IOM port status offset than Intel TigerLake. Add a new ACPI ID for ADL and use the IOM port status offset as per the platform. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Link: https://lore.kernel.org/r/20210601035843.71150-1-azhar.shaikh@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 1b1b672cc1d4 ("usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM device") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/typec/mux/intel_pmc_mux.c | 28 ++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index acdef6fbb85e..ea1333ad4b2b 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -83,8 +83,6 @@ enum { /* * Input Output Manager (IOM) PORT STATUS */ -#define IOM_PORT_STATUS_OFFSET 0x560 - #define IOM_PORT_STATUS_ACTIVITY_TYPE_MASK GENMASK(9, 6) #define IOM_PORT_STATUS_ACTIVITY_TYPE_SHIFT 6 #define IOM_PORT_STATUS_ACTIVITY_TYPE_USB 0x03 @@ -144,6 +142,7 @@ struct pmc_usb { struct pmc_usb_port *port; struct acpi_device *iom_adev; void __iomem *iom_base; + u32 iom_port_status_offset; }; static void update_port_status(struct pmc_usb_port *port) @@ -153,7 +152,8 @@ static void update_port_status(struct pmc_usb_port *port) /* SoC expects the USB Type-C port numbers to start with 0 */ port_num = port->usb3_port - 1; - port->iom_status = readl(port->pmc->iom_base + IOM_PORT_STATUS_OFFSET + + port->iom_status = readl(port->pmc->iom_base + + port->pmc->iom_port_status_offset + port_num * sizeof(u32)); } @@ -546,14 +546,32 @@ static int is_memory(struct acpi_resource *res, void *data) return !acpi_dev_resource_memory(res, &r); } +/* IOM ACPI IDs and IOM_PORT_STATUS_OFFSET */ +static const struct acpi_device_id iom_acpi_ids[] = { + /* TigerLake */ + { "INTC1072", 0x560, }, + + /* AlderLake */ + { "INTC1079", 0x160, }, + {} +}; + static int pmc_usb_probe_iom(struct pmc_usb *pmc) { struct list_head resource_list; struct resource_entry *rentry; - struct acpi_device *adev; + static const struct acpi_device_id *dev_id; + struct acpi_device *adev = NULL; int ret; - adev = acpi_dev_get_first_match_dev("INTC1072", NULL, -1); + for (dev_id = &iom_acpi_ids[0]; dev_id->id[0]; dev_id++) { + if (acpi_dev_present(dev_id->id, NULL, -1)) { + pmc->iom_port_status_offset = (u32)dev_id->driver_data; + adev = acpi_dev_get_first_match_dev(dev_id->id, NULL, -1); + break; + } + } + if (!adev) return -ENODEV; -- 2.25.1
From: Utkarsh Patel <utkarsh.h.patel@intel.com> stable inclusion from stable-v5.10.146 commit 2a358ad19c3ef46cdc67f69ff4782c1c1fcfa7a7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1b1b672cc1d4fb3065dac79efb8901bd6244ef69 ] This adds the necessary ACPI ID for Intel Meteor Lake IOM devices. The callback function is_memory() is modified so that it also checks if the resource descriptor passed to it is a memory type "Address Space Resource Descriptor". On Intel Meteor Lake the ACPI memory resource is not described using the "32-bit Memory Range Descriptor" because the memory is outside of the 32-bit address space. The memory resource is described using the "Address Space Resource Descriptor" instead. Intel Meteor Lake is the first platform to describe the memory resource for this device with Address Space Resource Descriptor, but it most likely will not be the last. Therefore the change to the is_memory() callback function is made generic. Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com> Cc: stable@vger.kernel.org [ heikki: Rewrote the commit message. ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220816101629.69054-2-heikki.krogerus@linux.intel... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/typec/mux/intel_pmc_mux.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index ea1333ad4b2b..80daa70e288b 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -541,9 +541,11 @@ static int pmc_usb_register_port(struct pmc_usb *pmc, int index, static int is_memory(struct acpi_resource *res, void *data) { - struct resource r; + struct resource_win win = {}; + struct resource *r = &win.res; - return !acpi_dev_resource_memory(res, &r); + return !(acpi_dev_resource_memory(res, r) || + acpi_dev_resource_address_space(res, &win)); } /* IOM ACPI IDs and IOM_PORT_STATUS_OFFSET */ @@ -553,6 +555,9 @@ static const struct acpi_device_id iom_acpi_ids[] = { /* AlderLake */ { "INTC1079", 0x160, }, + + /* Meteor Lake */ + { "INTC107A", 0x160, }, {} }; -- 2.25.1
From: Wesley Cheng <wcheng@codeaurora.org> stable inclusion from stable-v5.10.146 commit b83692feb09c1817674839f5b0ad68e630f61e51 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8217f07a50236779880f13e87f99224cd9117f83 ] There is a race present where the DWC3 runtime resume runs in parallel to the UDC unbind sequence. This will eventually lead to a possible scenario where we are enabling the run/stop bit, without a valid composition defined. Thread#1 (handling UDC unbind): usb_gadget_remove_driver() -->usb_gadget_disconnect() -->dwc3_gadget_pullup(0) --> continue UDC unbind sequence -->Thread#2 is running in parallel here Thread#2 (handing next cable connect) __dwc3_set_mode() -->pm_runtime_get_sync() -->dwc3_gadget_resume() -->dwc->gadget_driver is NOT NULL yet -->dwc3_gadget_run_stop(1) --> _dwc3gadget_start() ... Fix this by tracking the pullup disable routine, and avoiding resuming of the DWC3 gadget. Once the UDC is re-binded, that will trigger the pullup enable routine, which would handle enabling the DWC3 gadget. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20210917021852.2037-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/gadget.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 79e1b82e5e05..1cb1601a6d98 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1010,6 +1010,7 @@ struct dwc3_scratchpad_array { * @tx_max_burst_prd: max periodic ESS transmit burst size * @hsphy_interface: "utmi" or "ulpi" * @connected: true when we're connected to a host, false otherwise + * @softconnect: true when gadget connect is called, false when disconnect runs * @delayed_status: true when gadget driver asks for delayed status * @ep0_bounced: true when we used bounce buffer * @ep0_expect_in: true when we expect a DATA IN transfer @@ -1218,6 +1219,7 @@ struct dwc3 { const char *hsphy_interface; unsigned connected:1; + unsigned softconnect:1; unsigned delayed_status:1; unsigned ep0_bounced:1; unsigned ep0_expect_in:1; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a2a10c05ef3f..85a0159f12ec 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2127,7 +2127,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) int ret; is_on = !!is_on; - + dwc->softconnect = is_on; /* * Per databook, when we want to stop the gadget, if a control transfer * is still in process, complete it and get the core into setup phase. @@ -4048,7 +4048,7 @@ int dwc3_gadget_resume(struct dwc3 *dwc) { int ret; - if (!dwc->gadget_driver) + if (!dwc->gadget_driver || !dwc->softconnect) return 0; ret = __dwc3_gadget_start(dwc); -- 2.25.1
From: Wesley Cheng <quic_wcheng@quicinc.com> stable inclusion from stable-v5.10.146 commit 6bd182beef5deaf5ceaa5d658f22e46cc3014912 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0066472de157439d58454f4a55786f1045ea5681 ] It is recommended by the Synopsis databook to issue a DCTL.CSftReset when reconnecting from a device-initiated disconnect routine. This resolves issues with enumeration during fast composition switching cases, which result in an unknown device on the host. Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220316011358.3057-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc3/core.c | 4 +--- drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/gadget.c | 11 +++++++++++ 3 files changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 5aae7504f78a..4a0eec176511 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -114,8 +114,6 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode) dwc->current_dr_role = mode; } -static int dwc3_core_soft_reset(struct dwc3 *dwc); - static void __dwc3_set_mode(struct work_struct *work) { struct dwc3 *dwc = work_to_dwc(work); @@ -265,7 +263,7 @@ u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type) * dwc3_core_soft_reset - Issues core soft reset and PHY reset * @dwc: pointer to our context structure */ -static int dwc3_core_soft_reset(struct dwc3 *dwc) +int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; int retries = 1000; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 1cb1601a6d98..cbebe541f7e8 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1458,6 +1458,8 @@ bool dwc3_has_imod(struct dwc3 *dwc); int dwc3_event_buffers_setup(struct dwc3 *dwc); void dwc3_event_buffers_cleanup(struct dwc3 *dwc); +int dwc3_core_soft_reset(struct dwc3 *dwc); + #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_host_init(struct dwc3 *dwc); void dwc3_host_exit(struct dwc3 *dwc); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 85a0159f12ec..e7ede868ffb3 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2200,6 +2200,17 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) dwc->ev_buf->length; } } else { + /* + * In the Synopsys DWC_usb31 1.90a programming guide section + * 4.1.9, it specifies that for a reconnect after a + * device-initiated disconnect requires a core soft reset + * (DCTL.CSftRst) before enabling the run/stop bit. + */ + spin_unlock_irqrestore(&dwc->lock, flags); + dwc3_core_soft_reset(dwc); + spin_lock_irqsave(&dwc->lock, flags); + + dwc3_event_buffers_setup(dwc); __dwc3_gadget_start(dwc); } -- 2.25.1
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com> stable inclusion from stable-v5.10.146 commit db27874477fd5772e1a87e292e807a834d49e9f6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 69e131d1ac4e52a59ec181ab4f8aa8c48cd8fb64 ] Don't do soft-disconnect if it's previously done. Likewise, don't do soft-connect if the device is currently connected and running. It would break normal operation. Currently the caller of pullup() (udc's sysfs soft_connect) only checks if it had initiated disconnect to prevent repeating soft-disconnect. It doesn't check for soft-connect. To be safe, let's keep the check here regardless whether the udc core is fixed. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/1c1345bd66c97a9d32f77d63aaadd04b7b037143.165059382... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc3/gadget.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index e7ede868ffb3..3820dff0387a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2127,6 +2127,10 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) int ret; is_on = !!is_on; + + if (dwc->pullups_connected == is_on) + return 0; + dwc->softconnect = is_on; /* * Per databook, when we want to stop the gadget, if a control transfer -- 2.25.1
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com> stable inclusion from stable-v5.10.146 commit ab046365c91c5444c3f0354665859726a3d5e378 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 861c010a2ee1bc4a66d23f0da4aa22e75d8eaa24 ] Move soft-disconnect sequence out of dwc3_gadget_pullup(). No functional change here. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/4c0f259b17d95acaaa931f90276683a48a32fe22.165059382... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc3/gadget.c | 65 ++++++++++++++++++++++----------------- 1 file changed, 36 insertions(+), 29 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 3820dff0387a..bd1050f75558 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2120,6 +2120,40 @@ static void dwc3_gadget_disable_irq(struct dwc3 *dwc); static void __dwc3_gadget_stop(struct dwc3 *dwc); static int __dwc3_gadget_start(struct dwc3 *dwc); +static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) +{ + u32 count; + + dwc->connected = false; + + /* + * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a + * Section 4.1.8 Table 4-7, it states that for a device-initiated + * disconnect, the SW needs to ensure that it sends "a DEPENDXFER + * command for any active transfers" before clearing the RunStop + * bit. + */ + dwc3_stop_active_transfers(dwc); + __dwc3_gadget_stop(dwc); + + /* + * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a + * Section 1.3.4, it mentions that for the DEVCTRLHLT bit, the + * "software needs to acknowledge the events that are generated + * (by writing to GEVNTCOUNTn) while it is waiting for this bit + * to be set to '1'." + */ + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); + count &= DWC3_GEVNTCOUNT_MASK; + if (count > 0) { + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count); + dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % + dwc->ev_buf->length; + } + + return dwc3_gadget_run_stop(dwc, false, false); +} + static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { struct dwc3 *dwc = gadget_to_dwc(g); @@ -2176,33 +2210,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) spin_lock_irqsave(&dwc->lock, flags); if (!is_on) { - u32 count; - - dwc->connected = false; - /* - * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a - * Section 4.1.8 Table 4-7, it states that for a device-initiated - * disconnect, the SW needs to ensure that it sends "a DEPENDXFER - * command for any active transfers" before clearing the RunStop - * bit. - */ - dwc3_stop_active_transfers(dwc); - __dwc3_gadget_stop(dwc); - - /* - * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a - * Section 1.3.4, it mentions that for the DEVCTRLHLT bit, the - * "software needs to acknowledge the events that are generated - * (by writing to GEVNTCOUNTn) while it is waiting for this bit - * to be set to '1'." - */ - count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); - count &= DWC3_GEVNTCOUNT_MASK; - if (count > 0) { - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count); - dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % - dwc->ev_buf->length; - } + ret = dwc3_gadget_soft_disconnect(dwc); } else { /* * In the Synopsys DWC_usb31 1.90a programming guide section @@ -2216,9 +2224,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) dwc3_event_buffers_setup(dwc); __dwc3_gadget_start(dwc); + ret = dwc3_gadget_run_stop(dwc, true, false); } - - ret = dwc3_gadget_run_stop(dwc, is_on, false); spin_unlock_irqrestore(&dwc->lock, flags); enable_irq(dwc->irq_gadget); -- 2.25.1
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com> stable inclusion from stable-v5.10.146 commit ff23c7277fb41fe13283b1b3edd997cbddd7a18c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8f8034f493b5eb1ad21ff392fd30c0cf9e71f73f ] If the GEVNTCOUNT indicates events in the event buffer, the driver needs to acknowledge them before the controller can halt. Simply let the interrupt handler acknowledges the remaining event generated by the controller while polling for DSTS.DEVCTLHLT. This avoids disabling irq and taking care of race condition between the interrupt handlers and pullup(). Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ea306ec93c41ccafbdb5d16404ff3b6eca299613.165059382... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc3/gadget.c | 35 ++++++++--------------------------- 1 file changed, 8 insertions(+), 27 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index bd1050f75558..818a70e56d89 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2122,8 +2122,9 @@ static int __dwc3_gadget_start(struct dwc3 *dwc); static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) { - u32 count; + unsigned long flags; + spin_lock_irqsave(&dwc->lock, flags); dwc->connected = false; /* @@ -2135,29 +2136,21 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) */ dwc3_stop_active_transfers(dwc); __dwc3_gadget_stop(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); /* - * In the Synopsys DesignWare Cores USB3 Databook Rev. 3.30a - * Section 1.3.4, it mentions that for the DEVCTRLHLT bit, the - * "software needs to acknowledge the events that are generated - * (by writing to GEVNTCOUNTn) while it is waiting for this bit - * to be set to '1'." + * Note: if the GEVNTCOUNT indicates events in the event buffer, the + * driver needs to acknowledge them before the controller can halt. + * Simply let the interrupt handler acknowledges and handle the + * remaining event generated by the controller while polling for + * DSTS.DEVCTLHLT. */ - count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0)); - count &= DWC3_GEVNTCOUNT_MASK; - if (count > 0) { - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count); - dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % - dwc->ev_buf->length; - } - return dwc3_gadget_run_stop(dwc, false, false); } static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { struct dwc3 *dwc = gadget_to_dwc(g); - unsigned long flags; int ret; is_on = !!is_on; @@ -2201,14 +2194,6 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) return 0; } - /* - * Synchronize and disable any further event handling while controller - * is being enabled/disabled. - */ - disable_irq(dwc->irq_gadget); - - spin_lock_irqsave(&dwc->lock, flags); - if (!is_on) { ret = dwc3_gadget_soft_disconnect(dwc); } else { @@ -2218,16 +2203,12 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) * device-initiated disconnect requires a core soft reset * (DCTL.CSftRst) before enabling the run/stop bit. */ - spin_unlock_irqrestore(&dwc->lock, flags); dwc3_core_soft_reset(dwc); - spin_lock_irqsave(&dwc->lock, flags); dwc3_event_buffers_setup(dwc); __dwc3_gadget_start(dwc); ret = dwc3_gadget_run_stop(dwc, true, false); } - spin_unlock_irqrestore(&dwc->lock, flags); - enable_irq(dwc->irq_gadget); pm_runtime_put(dwc->dev); -- 2.25.1
From: Wesley Cheng <quic_wcheng@quicinc.com> stable inclusion from stable-v5.10.146 commit 9c28189bb654a97efadbdb78c6ef67564b03eb3e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 040f2dbd2010c43f33ad27249e6dac48456f4d99 ] Relocate the pullups_connected check until after it is ensured that there are no runtime PM transitions. If another context triggered the DWC3 core's runtime resume, it may have already enabled the Run/Stop. Do not re-run the entire pullup sequence again, as it may issue a core soft reset while Run/Stop is already set. This patch depends on commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()") Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded") Cc: stable <stable@kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/dwc3/gadget.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 818a70e56d89..41ed2f6f8a8d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2155,9 +2155,6 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) is_on = !!is_on; - if (dwc->pullups_connected == is_on) - return 0; - dwc->softconnect = is_on; /* * Per databook, when we want to stop the gadget, if a control transfer @@ -2194,6 +2191,11 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) return 0; } + if (dwc->pullups_connected == is_on) { + pm_runtime_put(dwc->dev); + return 0; + } + if (!is_on) { ret = dwc3_gadget_soft_disconnect(dwc); } else { -- 2.25.1
From: Chunfeng Yun <chunfeng.yun@mediatek.com> stable inclusion from stable-v5.10.146 commit b1e11bc66cfd320a72e89d138102aa2cdb530a67 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 7c986fbc16ae6b2f914a3ebf06a3a4a8d9bb0b7c ] Tune the boundary for FS/LS ESIT due to CS: For ISOC out-ep, the controller starts transfer data after the first SS; for others, the data is already transferred before the last CS. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/49e5a269a47984f3126a70c3fb471b0c2874b8c2.161517062... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-mtk-sch.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 8950d1f10a7f..450fa22b7dc7 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -513,22 +513,35 @@ static void update_sch_tt(struct usb_device *udev, list_del(&sch_ep->tt_endpoint); } +static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep) +{ + u32 boundary = sch_ep->esit; + + if (sch_ep->sch_tt) { /* LS/FS with TT */ + /* tune for CS */ + if (sch_ep->ep_type != ISOC_OUT_EP) + boundary++; + else if (boundary > 1) /* normally esit >= 8 for FS/LS */ + boundary--; + } + + return boundary; +} + static int check_sch_bw(struct usb_device *udev, struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) { u32 offset; - u32 esit; u32 min_bw; u32 min_index; u32 worst_bw; u32 bw_boundary; + u32 esit_boundary; u32 min_num_budget; u32 min_cs_count; bool tt_offset_ok = false; int ret; - esit = sch_ep->esit; - /* * Search through all possible schedule microframes. * and find a microframe where its worst bandwidth is minimum. @@ -537,7 +550,8 @@ static int check_sch_bw(struct usb_device *udev, min_index = 0; min_cs_count = sch_ep->cs_count; min_num_budget = sch_ep->num_budget_microframes; - for (offset = 0; offset < esit; offset++) { + esit_boundary = get_esit_boundary(sch_ep); + for (offset = 0; offset < sch_ep->esit; offset++) { if (is_fs_or_ls(udev->speed)) { ret = check_sch_tt(udev, sch_ep, offset); if (ret) @@ -546,7 +560,7 @@ static int check_sch_bw(struct usb_device *udev, tt_offset_ok = true; } - if ((offset + sch_ep->num_budget_microframes) > sch_ep->esit) + if ((offset + sch_ep->num_budget_microframes) > esit_boundary) break; worst_bw = get_max_bw(sch_bw, sch_ep, offset); -- 2.25.1
From: Chunfeng Yun <chunfeng.yun@mediatek.com> stable inclusion from stable-v5.10.146 commit a2566a8dc5dac79718b3a1b685d9b27ca91c449b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1bf661daf6b084bc4d753f55b54f35dc98709685 ] In USB2 Spec: "11.18.5 TT Response Generation In general, there will be two (or more) complete-split transactions scheduled for a periodic endpoint. However, for interrupt endpoints, the maximum size of the full-/low-speed transaction guarantees that it can never require more than two complete-split transactions. Two complete-split transactions are only required when the transaction spans a microframe boundary." Due to the maxp is 64, and less then 188 (at most in one microframe), seems never span boundary, so use only one CS for FS/LS interrupt transfer, this will save some bandwidth. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/5b9ff09f53d23cf9e5c5437db4ffc18b798bf60c.161517062... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-mtk-sch.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 450fa22b7dc7..59ba25ca018d 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -408,13 +408,11 @@ static int check_sch_tt(struct usb_device *udev, { struct mu3h_sch_tt *tt = sch_ep->sch_tt; u32 extra_cs_count; - u32 fs_budget_start; u32 start_ss, last_ss; u32 start_cs, last_cs; int i; start_ss = offset % 8; - fs_budget_start = (start_ss + 1) % 8; if (sch_ep->ep_type == ISOC_OUT_EP) { last_ss = start_ss + sch_ep->cs_count - 1; @@ -450,16 +448,14 @@ static int check_sch_tt(struct usb_device *udev, if (sch_ep->ep_type == ISOC_IN_EP) extra_cs_count = (last_cs == 7) ? 1 : 2; else /* ep_type : INTR IN / INTR OUT */ - extra_cs_count = (fs_budget_start == 6) ? 1 : 2; + extra_cs_count = 1; cs_count += extra_cs_count; if (cs_count > 7) cs_count = 7; /* HW limit */ - for (i = 0; i < cs_count + 2; i++) { - if (test_bit(offset + i, tt->ss_bit_map)) - return -ERANGE; - } + if (test_bit(offset, tt->ss_bit_map)) + return -ERANGE; sch_ep->cs_count = cs_count; /* one for ss, the other for idle */ -- 2.25.1
From: Chunfeng Yun <chunfeng.yun@mediatek.com> stable inclusion from stable-v5.10.146 commit c2e7000b137bd5ab8979b409afa39c9e87ff4b51 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 4a56adf4fafbc41ceffce0c3f385f59d4fc3c16a ] It's clearer to use @sch_tt to check whether need do TT schedule, no function is changed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/324a76782ccaf857a8f01f67aee435e8ec7d0e28.161517062... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-mtk-sch.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 59ba25ca018d..b1da3cb077c9 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -548,7 +548,7 @@ static int check_sch_bw(struct usb_device *udev, min_num_budget = sch_ep->num_budget_microframes; esit_boundary = get_esit_boundary(sch_ep); for (offset = 0; offset < sch_ep->esit; offset++) { - if (is_fs_or_ls(udev->speed)) { + if (sch_ep->sch_tt) { ret = check_sch_tt(udev, sch_ep, offset); if (ret) continue; @@ -585,7 +585,7 @@ static int check_sch_bw(struct usb_device *udev, sch_ep->cs_count = min_cs_count; sch_ep->num_budget_microframes = min_num_budget; - if (is_fs_or_ls(udev->speed)) { + if (sch_ep->sch_tt) { /* all offset for tt is not ok*/ if (!tt_offset_ok) return -ERANGE; -- 2.25.1
From: Chunfeng Yun <chunfeng.yun@mediatek.com> stable inclusion from stable-v5.10.146 commit 402fa9214e128ee6fc5d7dd82c3b81a41264bbfb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 338af695fffb12a9407c376ce0cebce896c15050 ] Extract a function to load/unload bandwidth info, and remove a dummy check of TT offset. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/6fbc000756a4a4a7efbce651b785fee7561becb6.161517062... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-mtk-sch.c | 37 ++++++++++++++------------------- 1 file changed, 16 insertions(+), 21 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index b1da3cb077c9..9a9685f74940 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -375,7 +375,6 @@ static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, sch_ep->bw_budget_table[j]; } } - sch_ep->allocated = used; } static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) @@ -509,6 +508,19 @@ static void update_sch_tt(struct usb_device *udev, list_del(&sch_ep->tt_endpoint); } +static int load_ep_bw(struct usb_device *udev, struct mu3h_sch_bw_info *sch_bw, + struct mu3h_sch_ep_info *sch_ep, bool loaded) +{ + if (sch_ep->sch_tt) + update_sch_tt(udev, sch_ep, loaded); + + /* update bus bandwidth info */ + update_bus_bw(sch_bw, sch_ep, loaded); + sch_ep->allocated = loaded; + + return 0; +} + static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep) { u32 boundary = sch_ep->esit; @@ -535,7 +547,6 @@ static int check_sch_bw(struct usb_device *udev, u32 esit_boundary; u32 min_num_budget; u32 min_cs_count; - bool tt_offset_ok = false; int ret; /* @@ -552,8 +563,6 @@ static int check_sch_bw(struct usb_device *udev, ret = check_sch_tt(udev, sch_ep, offset); if (ret) continue; - else - tt_offset_ok = true; } if ((offset + sch_ep->num_budget_microframes) > esit_boundary) @@ -585,29 +594,15 @@ static int check_sch_bw(struct usb_device *udev, sch_ep->cs_count = min_cs_count; sch_ep->num_budget_microframes = min_num_budget; - if (sch_ep->sch_tt) { - /* all offset for tt is not ok*/ - if (!tt_offset_ok) - return -ERANGE; - - update_sch_tt(udev, sch_ep, 1); - } - - /* update bus bandwidth info */ - update_bus_bw(sch_bw, sch_ep, 1); - - return 0; + return load_ep_bw(udev, sch_bw, sch_ep, true); } static void destroy_sch_ep(struct usb_device *udev, struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) { /* only release ep bw check passed by check_sch_bw() */ - if (sch_ep->allocated) { - update_bus_bw(sch_bw, sch_ep, 0); - if (sch_ep->sch_tt) - update_sch_tt(udev, sch_ep, 0); - } + if (sch_ep->allocated) + load_ep_bw(udev, sch_bw, sch_ep, false); if (sch_ep->sch_tt) drop_tt(udev); -- 2.25.1
From: Chunfeng Yun <chunfeng.yun@mediatek.com> stable inclusion from stable-v5.10.146 commit b19f9f412216a128ae4d7d50970ab5bf0537afc3 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit ccda8c224c0701caac007311d06a2de9543a7590 ] This is used to provide more information about which case causes bandwidth schedule failure. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/9771f44093053b581e9c4be4b7fb68d9fcecad08.161517062... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-mtk-sch.c | 44 ++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 9 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 9a9685f74940..a6ec75bf2def 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -25,6 +25,13 @@ */ #define TT_MICROFRAMES_MAX 9 +/* schedule error type */ +#define ESCH_SS_Y6 1001 +#define ESCH_SS_OVERLAP 1002 +#define ESCH_CS_OVERFLOW 1003 +#define ESCH_BW_OVERFLOW 1004 +#define ESCH_FIXME 1005 + /* mtk scheduler bitmasks */ #define EP_BPKTS(p) ((p) & 0x7f) #define EP_BCSCOUNT(p) (((p) & 0x7) << 8) @@ -32,6 +39,24 @@ #define EP_BOFFSET(p) ((p) & 0x3fff) #define EP_BREPEAT(p) (((p) & 0x7fff) << 16) +static char *sch_error_string(int err_num) +{ + switch (err_num) { + case ESCH_SS_Y6: + return "Can't schedule Start-Split in Y6"; + case ESCH_SS_OVERLAP: + return "Can't find a suitable Start-Split location"; + case ESCH_CS_OVERFLOW: + return "The last Complete-Split is greater than 7"; + case ESCH_BW_OVERFLOW: + return "Bandwidth exceeds the maximum limit"; + case ESCH_FIXME: + return "FIXME, to be resolved"; + default: + return "Unknown"; + } +} + static int is_fs_or_ls(enum usb_device_speed speed) { return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW; @@ -395,7 +420,7 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) for (j = 0; j < sch_ep->cs_count; j++) { tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_cost_per_microframe; if (tmp > FS_PAYLOAD_MAX) - return -ERANGE; + return -ESCH_BW_OVERFLOW; } } @@ -421,11 +446,11 @@ static int check_sch_tt(struct usb_device *udev, * must never schedule Start-Split in Y6 */ if (!(start_ss == 7 || last_ss < 6)) - return -ERANGE; + return -ESCH_SS_Y6; for (i = 0; i < sch_ep->cs_count; i++) if (test_bit(offset + i, tt->ss_bit_map)) - return -ERANGE; + return -ESCH_SS_OVERLAP; } else { u32 cs_count = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); @@ -435,14 +460,14 @@ static int check_sch_tt(struct usb_device *udev, * must never schedule Start-Split in Y6 */ if (start_ss == 6) - return -ERANGE; + return -ESCH_SS_Y6; /* one uframe for ss + one uframe for idle */ start_cs = (start_ss + 2) % 8; last_cs = start_cs + cs_count - 1; if (last_cs > 7) - return -ERANGE; + return -ESCH_CS_OVERFLOW; if (sch_ep->ep_type == ISOC_IN_EP) extra_cs_count = (last_cs == 7) ? 1 : 2; @@ -454,7 +479,7 @@ static int check_sch_tt(struct usb_device *udev, cs_count = 7; /* HW limit */ if (test_bit(offset, tt->ss_bit_map)) - return -ERANGE; + return -ESCH_SS_OVERLAP; sch_ep->cs_count = cs_count; /* one for ss, the other for idle */ @@ -547,7 +572,7 @@ static int check_sch_bw(struct usb_device *udev, u32 esit_boundary; u32 min_num_budget; u32 min_cs_count; - int ret; + int ret = 0; /* * Search through all possible schedule microframes. @@ -588,7 +613,7 @@ static int check_sch_bw(struct usb_device *udev, /* check bandwidth */ if (min_bw > bw_boundary) - return -ERANGE; + return ret ? ret : -ESCH_BW_OVERFLOW; sch_ep->offset = min_index; sch_ep->cs_count = min_cs_count; @@ -765,7 +790,8 @@ int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) ret = check_sch_bw(udev, sch_bw, sch_ep); if (ret) { - xhci_err(xhci, "Not enough bandwidth!\n"); + xhci_err(xhci, "Not enough bandwidth! (%s)\n", + sch_error_string(-ret)); return -ENOSPC; } } -- 2.25.1
From: Chunfeng Yun <chunfeng.yun@mediatek.com> stable inclusion from stable-v5.10.146 commit 99f48a3a6eecb57a4378f414bee5aa1a81270f8c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d3997fce189fc4423169c51a81ba5ca01144d886 ] This patch is used to relax bandwidth schedule by allowing multiple Start-Split in the same microframe. Reviewed-and-Tested-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623995165-25759-1-git-send-email-chunfeng.yun@med... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-mtk-sch.c | 18 ------------------ drivers/usb/host/xhci-mtk.h | 2 -- 2 files changed, 20 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index a6ec75bf2def..f048af9c5335 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -430,11 +430,9 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) static int check_sch_tt(struct usb_device *udev, struct mu3h_sch_ep_info *sch_ep, u32 offset) { - struct mu3h_sch_tt *tt = sch_ep->sch_tt; u32 extra_cs_count; u32 start_ss, last_ss; u32 start_cs, last_cs; - int i; start_ss = offset % 8; @@ -448,10 +446,6 @@ static int check_sch_tt(struct usb_device *udev, if (!(start_ss == 7 || last_ss < 6)) return -ESCH_SS_Y6; - for (i = 0; i < sch_ep->cs_count; i++) - if (test_bit(offset + i, tt->ss_bit_map)) - return -ESCH_SS_OVERLAP; - } else { u32 cs_count = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); @@ -478,9 +472,6 @@ static int check_sch_tt(struct usb_device *udev, if (cs_count > 7) cs_count = 7; /* HW limit */ - if (test_bit(offset, tt->ss_bit_map)) - return -ESCH_SS_OVERLAP; - sch_ep->cs_count = cs_count; /* one for ss, the other for idle */ sch_ep->num_budget_microframes = cs_count + 2; @@ -502,11 +493,9 @@ static void update_sch_tt(struct usb_device *udev, struct mu3h_sch_tt *tt = sch_ep->sch_tt; u32 base, num_esit; int bw_updated; - int bits; int i, j; num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; - bits = (sch_ep->ep_type == ISOC_OUT_EP) ? sch_ep->cs_count : 1; if (used) bw_updated = sch_ep->bw_cost_per_microframe; @@ -516,13 +505,6 @@ static void update_sch_tt(struct usb_device *udev, for (i = 0; i < num_esit; i++) { base = sch_ep->offset + i * sch_ep->esit; - for (j = 0; j < bits; j++) { - if (used) - set_bit(base + j, tt->ss_bit_map); - else - clear_bit(base + j, tt->ss_bit_map); - } - for (j = 0; j < sch_ep->cs_count; j++) tt->fs_bus_bw[base + j] += bw_updated; } diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index 2fc0568ba054..3e2c607b5d64 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -20,14 +20,12 @@ #define XHCI_MTK_MAX_ESIT 64 /** - * @ss_bit_map: used to avoid start split microframes overlay * @fs_bus_bw: array to keep track of bandwidth already used for FS * @ep_list: Endpoints using this TT * @usb_tt: usb TT related * @tt_port: TT port number */ struct mu3h_sch_tt { - DECLARE_BITMAP(ss_bit_map, XHCI_MTK_MAX_ESIT); u32 fs_bus_bw[XHCI_MTK_MAX_ESIT]; struct list_head ep_list; struct usb_tt *usb_tt; -- 2.25.1
From: Ikjoon Jang <ikjn@chromium.org> stable inclusion from stable-v5.10.146 commit 7780b3dda212babc7b8988c9f8f82f5324e8f7cf category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 548011957d1d72e0b662300c8b32b81d593b796e ] Currently xhci-mtk needs software-managed bandwidth allocation for periodic endpoints, it allocates the microframe index for the first start-split packet for each endpoint. As this index allocation logic should avoid the conflicts with other full/low-speed periodic endpoints, it uses the worst case byte budgets on high-speed bus bandwidth For example, for an isochronos IN endpoint with 192 bytes budget, it will consume the whole 4 u-frames(188 * 4) while the actual full-speed bus budget should be just 192bytes. This patch changes the low/full-speed bandwidth allocation logic to use "approximate" best case budget for lower speed bandwidth management. For the same endpoint from the above example, the approximate best case budget is now reduced to (188 * 2) bytes. Without this patch, many usb audio headsets with 3 interfaces (audio input, audio output, and HID) cannot be configured on xhci-mtk. Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Link: https://lore.kernel.org/r/20210805133937.1.Ia8174b875bc926c12ce427a5a1415dea... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-mtk-sch.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index f048af9c5335..4a7b200674ea 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -408,16 +408,17 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) u32 num_esit, tmp; int base; int i, j; + u8 uframes = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; + + if (sch_ep->ep_type == INT_IN_EP || sch_ep->ep_type == ISOC_IN_EP) + offset++; + for (i = 0; i < num_esit; i++) { base = offset + i * sch_ep->esit; - /* - * Compared with hs bus, no matter what ep type, - * the hub will always delay one uframe to send data - */ - for (j = 0; j < sch_ep->cs_count; j++) { + for (j = 0; j < uframes; j++) { tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_cost_per_microframe; if (tmp > FS_PAYLOAD_MAX) return -ESCH_BW_OVERFLOW; @@ -494,6 +495,8 @@ static void update_sch_tt(struct usb_device *udev, u32 base, num_esit; int bw_updated; int i, j; + int offset = sch_ep->offset; + u8 uframes = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; @@ -502,10 +505,13 @@ static void update_sch_tt(struct usb_device *udev, else bw_updated = -sch_ep->bw_cost_per_microframe; + if (sch_ep->ep_type == INT_IN_EP || sch_ep->ep_type == ISOC_IN_EP) + offset++; + for (i = 0; i < num_esit; i++) { - base = sch_ep->offset + i * sch_ep->esit; + base = offset + i * sch_ep->esit; - for (j = 0; j < sch_ep->cs_count; j++) + for (j = 0; j < uframes; j++) tt->fs_bus_bw[base + j] += bw_updated; } -- 2.25.1
From: Adrian Hunter <adrian.hunter@intel.com> stable inclusion from stable-v5.10.146 commit b3f2adf4262135a8b71f329da82b5c60a51309c6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 63f1560930e4e1c4f6279b8ae715c9841fe1a6d3 ] If re-initialization results is a different signal voltage, because the voltage switch failed previously, but not this time (or vice versa), then sd3_bus_mode will be inconsistent with the card because the SD_SWITCH command is done only upon first initialization. Fix by always reading SD_SWITCH information during re-initialization, which also means it does not need to be re-read later for the 1.8V fixup workaround. Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added about 1% to 1.5% to the re-initialization time, so it's not particularly significant. Reported-by: Seunghui Lee <sh043.lee@samsung.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Seunghui Lee <sh043.lee@samsung.com> Tested-by: Seunghui Lee <sh043.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/mmc/core/sd.c | 42 ++++++++++++++++-------------------------- 1 file changed, 16 insertions(+), 26 deletions(-) diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 0b09cdaaeb6c..899768ed1688 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -932,15 +932,16 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, /* Erase init depends on CSD and SSR */ mmc_init_erase(card); - - /* - * Fetch switch information from card. - */ - err = mmc_read_switch(card); - if (err) - return err; } + /* + * Fetch switch information from card. Note, sd3_bus_mode can change if + * voltage switch outcome changes, so do this always. + */ + err = mmc_read_switch(card); + if (err) + return err; + /* * For SPI, enable CRC as appropriate. * This CRC enable is located AFTER the reading of the @@ -1089,26 +1090,15 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, if (!v18_fixup_failed && !mmc_host_is_spi(host) && mmc_host_uhs(host) && mmc_sd_card_using_v18(card) && host->ios.signal_voltage != MMC_SIGNAL_VOLTAGE_180) { - /* - * Re-read switch information in case it has changed since - * oldcard was initialized. - */ - if (oldcard) { - err = mmc_read_switch(card); - if (err) - goto free_card; - } - if (mmc_sd_card_using_v18(card)) { - if (mmc_host_set_uhs_voltage(host) || - mmc_sd_init_uhs_card(card)) { - v18_fixup_failed = true; - mmc_power_cycle(host, ocr); - if (!oldcard) - mmc_remove_card(card); - goto retry; - } - goto cont; + if (mmc_host_set_uhs_voltage(host) || + mmc_sd_init_uhs_card(card)) { + v18_fixup_failed = true; + mmc_power_cycle(host, ocr); + if (!oldcard) + mmc_remove_card(card); + goto retry; } + goto cont; } /* Initialization sequence for UHS-I cards */ -- 2.25.1
From: Lino Sanfilippo <LinoSanfilippo@gmx.de> stable inclusion from stable-v5.10.146 commit 730f78c51bdc148aa2bb477c34dfeec9bca68896 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 60efd0513916f195dd85bfbf21653f74f9ab019c ] In uart_set_rs485_config() the serial core already assigns the passed serial_rs485 struct to the uart port. So remove the assignment from the drivers rs485_config() function to avoid redundancy. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20220410104642.32195-10-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 692a8ebcfc24 ("tty: serial: atmel: Preserve previous USART mode if RS485 disabled") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/serial/atmel_serial.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 602065bfc9bb..e7526060926d 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -298,11 +298,9 @@ static int atmel_config_rs485(struct uart_port *port, /* Resetting serial mode to RS232 (0x0) */ mode &= ~ATMEL_US_USMODE; - port->rs485 = *rs485conf; - if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); - if (port->rs485.flags & SER_RS485_RX_DURING_TX) + if (rs485conf->flags & SER_RS485_RX_DURING_TX) atmel_port->tx_done_mask = ATMEL_US_TXRDY; else atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; -- 2.25.1
From: Sergiu Moga <sergiu.moga@microchip.com> stable inclusion from stable-v5.10.146 commit 345bdea212e341cc55e1105283a7787edcbca448 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 692a8ebcfc24f4a5bea0eb2967e450f584193da6 ] Whenever the atmel_rs485_config() driver method would be called, the USART mode is reset to normal mode before even checking if RS485 flag is set, thus resulting in losing the previous USART mode in the case where the checking fails. Some tools, such as `linux-serial-test`, lead to the driver calling this method when doing the setup of the serial port: after setting the port mode (Hardware Flow Control, Normal Mode, RS485 Mode, etc.), `linux-serial-test` tries to enable/disable RS485 depending on the commandline arguments that were passed. Example of how this issue could reveal itself: When doing a serial communication with Hardware Flow Control through `linux-serial-test`, the tool would lead to the driver roughly doing the following: - set the corresponding bit to 1 (ATMEL_US_USMODE_HWHS bit in the ATMEL_US_MR register) through the atmel_set_termios() to enable Hardware Flow Control - disable RS485 through the atmel_config_rs485() method Thus, when the latter is called, the mode will be reset and the previously set bit is unset, leaving USART in normal mode instead of the expected Hardware Flow Control mode. This fix ensures that this reset is only done if the checking for RS485 succeeds and that the previous mode is preserved otherwise. Fixes: e8faff7330a35 ("ARM: 6092/1: atmel_serial: support for RS485 communications") Cc: stable <stable@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Link: https://lore.kernel.org/r/20220824142902.502596-1-sergiu.moga@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/serial/atmel_serial.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index e7526060926d..b7872ad3e762 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -295,9 +295,6 @@ static int atmel_config_rs485(struct uart_port *port, mode = atmel_uart_readl(port, ATMEL_US_MR); - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); if (rs485conf->flags & SER_RS485_RX_DURING_TX) @@ -307,6 +304,7 @@ static int atmel_config_rs485(struct uart_port *port, atmel_uart_writel(port, ATMEL_US_TTGR, rs485conf->delay_rts_after_send); + mode &= ~ATMEL_US_USMODE; mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); -- 2.25.1
From: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> stable inclusion from stable-v5.10.150 commit b239a0993aa2d603c11bd94fa4a93670fb117d45 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58 ] The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers: 17ef:1018 upstream 17ef:1019 downstream Those two controllers both have problems with some USB3.0 devices, particularly self-powered ones. Typical error messages include: Timeout while waiting for setup device command device not accepting address X, error -62 unable to enumerate USB device By process of elimination the controllers themselves were identified as the cause of the problem. Through trial and error the issue was solved by using USB_QUIRK_RESET_RESUME for both chips. Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220824191320.17883-1-jflf_kernel@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f03ee889ecc7..03473e20e218 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -438,6 +438,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1532, 0x0116), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */ + { USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */ { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM }, -- 2.25.1
From: Piyush Mehta <piyush.mehta@amd.com> stable inclusion from stable-v5.10.146 commit f457bb21984b9e412a7bb56ea74482da621e6046 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b ] For ARM processor, unaligned access to device memory is not allowed. Method memcpy does not take care of alignment. USB detection failure with the unaligned address of memory access, with below kernel crash. To fix the unaligned address the kernel panic issue, replace memcpy with memcpy_toio method. Kernel crash: Unable to handle kernel paging request at virtual address ffff80000c05008a Mem abort info: ESR = 0x96000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000 [ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003, pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713 Internal error: Oops: 96000061 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x30/0x260 lr : __xudc_ep0_queue+0xf0/0x110 sp : ffff800008003d00 x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0 x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080 x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080 x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000 x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000 x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200 x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0 x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112 x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80 x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088 Call trace: __memcpy+0x30/0x260 xudc_ep0_queue+0x3c/0x60 usb_ep_queue+0x38/0x44 composite_ep0_queue.constprop.0+0x2c/0xc0 composite_setup+0x8d0/0x185c configfs_composite_setup+0x74/0xb0 xudc_irq+0x570/0xa40 __handle_irq_event_percpu+0x58/0x170 handle_irq_event+0x60/0x120 handle_fasteoi_irq+0xc0/0x220 handle_domain_irq+0x60/0x90 gic_handle_irq+0x74/0xa0 call_on_irq_stack+0x2c/0x60 do_interrupt_handler+0x54/0x60 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x78/0x7c arch_cpu_idle+0x18/0x2c do_idle+0xdc/0x15c cpu_startup_entry+0x28/0x60 rest_init+0xc8/0xe0 arch_call_rest_init+0x10/0x1c start_kernel+0x694/0x6d4 __primary_switched+0xa4/0xac Fixes: 1f7c51660034 ("usb: gadget: Add xilinx usb2 device support") Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20220824071253.1261096-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/gadget/udc/udc-xilinx.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index 096f56a09e6a..01133dc42340 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -496,11 +496,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, /* Get the Buffer address and copy the transmit data.*/ eprambase = (u32 __force *)(udc->addr + ep->rambase); if (ep->is_in) { - memcpy(eprambase, bufferptr, bytestosend); + memcpy_toio(eprambase, bufferptr, bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF0COUNT_OFFSET, bufferlen); } else { - memcpy(bufferptr, eprambase, bytestosend); + memcpy_toio(bufferptr, eprambase, bytestosend); } /* * Enable the buffer for transmission. @@ -514,11 +514,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, eprambase = (u32 __force *)(udc->addr + ep->rambase + ep->ep_usb.maxpacket); if (ep->is_in) { - memcpy(eprambase, bufferptr, bytestosend); + memcpy_toio(eprambase, bufferptr, bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF1COUNT_OFFSET, bufferlen); } else { - memcpy(bufferptr, eprambase, bytestosend); + memcpy_toio(bufferptr, eprambase, bytestosend); } /* * Enable the buffer for transmission. @@ -1020,7 +1020,7 @@ static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req) udc->addr); length = req->usb_req.actual = min_t(u32, length, EP0_MAX_PACKET); - memcpy(corebuf, req->usb_req.buf, length); + memcpy_toio(corebuf, req->usb_req.buf, length); udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); } else { @@ -1746,7 +1746,7 @@ static void xudc_handle_setup(struct xusb_udc *udc) /* Load up the chapter 9 command buffer.*/ ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET); - memcpy(&setup, ep0rambase, 8); + memcpy_toio(&setup, ep0rambase, 8); udc->setup = setup; udc->setup.wValue = cpu_to_le16(setup.wValue); @@ -1833,7 +1833,7 @@ static void xudc_ep0_out(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + bytes_to_rx; - memcpy(buffer, ep0rambase, bytes_to_rx); + memcpy_toio(buffer, ep0rambase, bytes_to_rx); if (req->usb_req.length == req->usb_req.actual) { /* Data transfer completed get ready for Status stage */ @@ -1909,7 +1909,7 @@ static void xudc_ep0_in(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + length; - memcpy(ep0rambase, buffer, length); + memcpy_toio(ep0rambase, buffer, length); } udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); -- 2.25.1
From: Pawel Laszczak <pawell@cadence.com> stable inclusion from stable-v5.10.146 commit 8fcb5f027b3967cba11f941c459f9834ea3a7a35 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d5dcc33677d7415c5f23b3c052f9e80cbab9ea4e ] The TRB_SMM flag indicates that DMA has completed the TD service with this TRB. Usually it’s a last TRB in TD. In case of ISOC transfer for bInterval > 1 each ISOC transfer contains more than one TD associated with usb request (one TD per ITP). In such case the TRB_SMM flag will be set in every TD and driver will recognize the end of transfer after processing the first TD with TRB_SMM. In result driver stops updating request->actual and returns incorrect actual length. To fix this issue driver additionally must check TRB_CHAIN which is not used for isochronous transfers. Fixes: 249f0a25e8be ("usb: cdns3: gadget: handle sg list use case at completion correctly") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062207.5824-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/cdns3/gadget.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index c6fc14b169da..d0d4de80680f 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -1531,7 +1531,8 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev, TRB_LEN(le32_to_cpu(trb->length)); if (priv_req->num_of_trb > 1 && - le32_to_cpu(trb->control) & TRB_SMM) + le32_to_cpu(trb->control) & TRB_SMM && + le32_to_cpu(trb->control) & TRB_CHAIN) transfer_end = true; cdns3_ep_inc_deq(priv_ep); -- 2.25.1
From: Pawel Laszczak <pawell@cadence.com> stable inclusion from stable-v5.10.146 commit 905e8be5284b09e69cb16a384f796c61a54c0bb1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit b46a6b09fa056042a302b181a1941f0056944603 ] ISO OUT endpoint is enabled during queuing first usb request in transfer ring and disabled when TRBERR is reported by controller. After TRBERR and before next transfer added to TR driver must again reenable endpoint but does not. To solve this issue during processing TRBERR event driver must set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062137.5766-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/cdns3/gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index d0d4de80680f..e3a8b6c71aa1 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -1692,6 +1692,7 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) ep_cfg &= ~EP_CFG_ENABLE; writel(ep_cfg, &priv_dev->regs->ep_cfg); priv_ep->flags &= ~EP_QUIRK_ISO_OUT_EN; + priv_ep->flags |= EP_UPDATE_EP_TRBADDR; } cdns3_transfer_completed(priv_dev, priv_ep); } else if (!(priv_ep->flags & EP_STALLED) && -- 2.25.1
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> stable inclusion from stable-v5.10.146 commit c4adbfa9cea72ab192c68043ebc0b8203d5ada27 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 58bfe7d8e31014d7ce246788df99c56e3cfe6c68 ] This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58. The quirk does not work properly, more work is needed to determine what should be done here. Reported-by: Oliver Neukum <oneukum@suse.com> Cc: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock") Link: https://lore.kernel.org/r/9a17ea86-079f-510d-e919-01bc53a6d09f@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/core/quirks.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 03473e20e218..f03ee889ecc7 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -438,10 +438,6 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1532, 0x0116), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, - /* Lenovo ThinkPad OneLink+ Dock twin hub controllers (VIA Labs VL812) */ - { USB_DEVICE(0x17ef, 0x1018), .driver_info = USB_QUIRK_RESET_RESUME }, - { USB_DEVICE(0x17ef, 0x1019), .driver_info = USB_QUIRK_RESET_RESUME }, - /* Lenovo USB-C to Ethernet Adapter RTL8153-04 */ { USB_DEVICE(0x17ef, 0x720c), .driver_info = USB_QUIRK_NO_LPM }, -- 2.25.1
From: Daniel Jordan <daniel.m.jordan@oracle.com> stable inclusion from stable-v5.10.146 commit 38cb9b868369c42a240de5b0da4bff226b1df953 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit be16c1fd99f41abebc0bf965d5d29cd18c9d271e ] vaddr_get_pfn() simply returns 0 on success. Have it report the number of pfns successfully gotten instead, whether from page pinning or follow_fault_pfn(), which will be used later when batching pinning. Change the last check in vfio_pin_pages_remote() for consistency with the other two. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Stable-dep-of: 873aefb376bb ("vfio/type1: Unpin zero pages") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/vfio/vfio_iommu_type1.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index 77503d59d973..62563e30a4b9 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -478,6 +478,10 @@ static int follow_fault_pfn(struct vm_area_struct *vma, struct mm_struct *mm, return ret; } +/* + * Returns the positive number of pfns successfully obtained or a negative + * error code. + */ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, int prot, unsigned long *pfn) { @@ -494,7 +498,6 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, page, NULL, NULL); if (ret == 1) { *pfn = page_to_pfn(page[0]); - ret = 0; goto done; } @@ -508,8 +511,12 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, if (ret == -EAGAIN) goto retry; - if (!ret && !is_invalid_reserved_pfn(*pfn)) - ret = -EFAULT; + if (!ret) { + if (is_invalid_reserved_pfn(*pfn)) + ret = 1; + else + ret = -EFAULT; + } } done: mmap_read_unlock(mm); @@ -535,7 +542,7 @@ static long vfio_pin_pages_remote(struct vfio_dma *dma, unsigned long vaddr, return -ENODEV; ret = vaddr_get_pfn(current->mm, vaddr, dma->prot, pfn_base); - if (ret) + if (ret < 0) return ret; pinned++; @@ -562,7 +569,7 @@ static long vfio_pin_pages_remote(struct vfio_dma *dma, unsigned long vaddr, for (vaddr += PAGE_SIZE, iova += PAGE_SIZE; pinned < npage; pinned++, vaddr += PAGE_SIZE, iova += PAGE_SIZE) { ret = vaddr_get_pfn(current->mm, vaddr, dma->prot, &pfn); - if (ret) + if (ret < 0) break; if (pfn != *pfn_base + pinned || @@ -588,7 +595,7 @@ static long vfio_pin_pages_remote(struct vfio_dma *dma, unsigned long vaddr, ret = vfio_lock_acct(dma, lock_acct, false); unpin_out: - if (ret) { + if (ret < 0) { if (!rsvd) { for (pfn = *pfn_base ; pinned ; pfn++, pinned--) put_pfn(pfn, dma->prot); @@ -632,7 +639,7 @@ static int vfio_pin_page_external(struct vfio_dma *dma, unsigned long vaddr, return -ENODEV; ret = vaddr_get_pfn(mm, vaddr, dma->prot, pfn_base); - if (!ret && do_accounting && !is_invalid_reserved_pfn(*pfn_base)) { + if (ret == 1 && do_accounting && !is_invalid_reserved_pfn(*pfn_base)) { ret = vfio_lock_acct(dma, 1, true); if (ret) { put_pfn(*pfn_base, dma->prot); -- 2.25.1
From: Daniel Jordan <daniel.m.jordan@oracle.com> stable inclusion from stable-v5.10.146 commit abb560abdf47f3091eb45d345b28397bb852ccc7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 4b6c33b3229678e38a6b0bbd4367d4b91366b523 ] Get ready to pin more pages at once with struct vfio_batch, which represents a batch of pinned pages. The struct has a fallback page pointer to avoid two unlikely scenarios: pointlessly allocating a page if disable_hugepages is enabled or failing the whole pinning operation if the kernel can't allocate memory. vaddr_get_pfn() becomes vaddr_get_pfns() to prepare for handling multiple pages, though for now only one page is stored in the pages array. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Stable-dep-of: 873aefb376bb ("vfio/type1: Unpin zero pages") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Conflicts: drivers/vfio/vfio_iommu_type1.c Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> --- drivers/vfio/vfio_iommu_type1.c | 71 +++++++++++++++++++++++++++------ 1 file changed, 58 insertions(+), 13 deletions(-) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index 62563e30a4b9..fb663e0f365c 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -111,6 +111,12 @@ struct vfio_sva_handle { struct list_head next; }; +struct vfio_batch { + struct page **pages; /* for pin_user_pages_remote */ + struct page *fallback_page; /* if pages alloc fails */ + int capacity; /* length of pages array */ +}; + struct vfio_group { struct iommu_group *iommu_group; struct list_head next; @@ -442,6 +448,31 @@ static int put_pfn(unsigned long pfn, int prot) return 0; } +#define VFIO_BATCH_MAX_CAPACITY (PAGE_SIZE / sizeof(struct page *)) + +static void vfio_batch_init(struct vfio_batch *batch) +{ + if (unlikely(disable_hugepages)) + goto fallback; + + batch->pages = (struct page **) __get_free_page(GFP_KERNEL); + if (!batch->pages) + goto fallback; + + batch->capacity = VFIO_BATCH_MAX_CAPACITY; + return; + +fallback: + batch->pages = &batch->fallback_page; + batch->capacity = 1; +} + +static void vfio_batch_fini(struct vfio_batch *batch) +{ + if (batch->capacity == VFIO_BATCH_MAX_CAPACITY) + free_page((unsigned long)batch->pages); +} + static int follow_fault_pfn(struct vm_area_struct *vma, struct mm_struct *mm, unsigned long vaddr, unsigned long *pfn, bool write_fault) @@ -482,10 +513,10 @@ static int follow_fault_pfn(struct vm_area_struct *vma, struct mm_struct *mm, * Returns the positive number of pfns successfully obtained or a negative * error code. */ -static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, - int prot, unsigned long *pfn) +static int vaddr_get_pfns(struct mm_struct *mm, unsigned long vaddr, + long npages, int prot, unsigned long *pfn, + struct page **pages) { - struct page *page[1]; struct vm_area_struct *vma; unsigned int flags = 0; int ret; @@ -494,10 +525,10 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, flags |= FOLL_WRITE; mmap_read_lock(mm); - ret = pin_user_pages_remote(mm, vaddr, 1, flags | FOLL_LONGTERM, - page, NULL, NULL); - if (ret == 1) { - *pfn = page_to_pfn(page[0]); + ret = pin_user_pages_remote(mm, vaddr, npages, flags | FOLL_LONGTERM, + pages, NULL, NULL); + if (ret > 0) { + *pfn = page_to_pfn(pages[0]); goto done; } @@ -530,7 +561,7 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, */ static long vfio_pin_pages_remote(struct vfio_dma *dma, unsigned long vaddr, long npage, unsigned long *pfn_base, - unsigned long limit) + unsigned long limit, struct vfio_batch *batch) { unsigned long pfn = 0; long ret, pinned = 0, lock_acct = 0; @@ -541,7 +572,8 @@ static long vfio_pin_pages_remote(struct vfio_dma *dma, unsigned long vaddr, if (!current->mm) return -ENODEV; - ret = vaddr_get_pfn(current->mm, vaddr, dma->prot, pfn_base); + ret = vaddr_get_pfns(current->mm, vaddr, 1, dma->prot, pfn_base, + batch->pages); if (ret < 0) return ret; @@ -568,7 +600,8 @@ static long vfio_pin_pages_remote(struct vfio_dma *dma, unsigned long vaddr, /* Lock all the consecutive pages from pfn_base */ for (vaddr += PAGE_SIZE, iova += PAGE_SIZE; pinned < npage; pinned++, vaddr += PAGE_SIZE, iova += PAGE_SIZE) { - ret = vaddr_get_pfn(current->mm, vaddr, dma->prot, &pfn); + ret = vaddr_get_pfns(current->mm, vaddr, 1, dma->prot, &pfn, + batch->pages); if (ret < 0) break; @@ -631,6 +664,7 @@ static long vfio_unpin_pages_remote(struct vfio_dma *dma, dma_addr_t iova, static int vfio_pin_page_external(struct vfio_dma *dma, unsigned long vaddr, unsigned long *pfn_base, bool do_accounting) { + struct page *pages[1]; struct mm_struct *mm; int ret; @@ -638,7 +672,7 @@ static int vfio_pin_page_external(struct vfio_dma *dma, unsigned long vaddr, if (!mm) return -ENODEV; - ret = vaddr_get_pfn(mm, vaddr, dma->prot, pfn_base); + ret = vaddr_get_pfns(mm, vaddr, 1, dma->prot, pfn_base, pages); if (ret == 1 && do_accounting && !is_invalid_reserved_pfn(*pfn_base)) { ret = vfio_lock_acct(dma, 1, true); if (ret) { @@ -1447,15 +1481,19 @@ static int vfio_pin_map_dma(struct vfio_iommu *iommu, struct vfio_dma *dma, { dma_addr_t iova = dma->iova; unsigned long vaddr = dma->vaddr; + struct vfio_batch batch; size_t size = map_size; long npage; unsigned long pfn, limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT; int ret = 0; + vfio_batch_init(&batch); + while (size) { /* Pin a contiguous chunk of memory */ npage = vfio_pin_pages_remote(dma, vaddr + dma->size, - size >> PAGE_SHIFT, &pfn, limit); + size >> PAGE_SHIFT, &pfn, limit, + &batch); if (npage <= 0) { WARN_ON(!npage); ret = (int)npage; @@ -1475,6 +1513,7 @@ static int vfio_pin_map_dma(struct vfio_iommu *iommu, struct vfio_dma *dma, dma->size += npage << PAGE_SHIFT; } + vfio_batch_fini(&batch); dma->iommu_mapped = true; if (ret) @@ -1638,6 +1677,7 @@ static int vfio_bus_type(struct device *dev, void *data) static int vfio_iommu_replay(struct vfio_iommu *iommu, struct vfio_domain *domain) { + struct vfio_batch batch; struct vfio_domain *d = NULL; struct rb_node *n; unsigned long limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT; @@ -1648,6 +1688,8 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu, d = list_first_entry(&iommu->domain_list, struct vfio_domain, next); + vfio_batch_init(&batch); + n = rb_first(&iommu->dma_list); for (; n; n = rb_next(n)) { @@ -1695,7 +1737,8 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu, npage = vfio_pin_pages_remote(dma, vaddr, n >> PAGE_SHIFT, - &pfn, limit); + &pfn, limit, + &batch); if (npage <= 0) { WARN_ON(!npage); ret = (int)npage; @@ -1728,6 +1771,7 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu, dma->iommu_mapped = true; } + vfio_batch_fini(&batch); return 0; unwind: @@ -1768,6 +1812,7 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu, } } + vfio_batch_fini(&batch); return ret; } -- 2.25.1
From: Alex Williamson <alex.williamson@redhat.com> stable inclusion from stable-v5.10.146 commit 578d644edc7d2c1ff53f7e4d0a25da473deb4a03 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 873aefb376bbc0ed1dd2381ea1d6ec88106fdbd4 ] There's currently a reference count leak on the zero page. We increment the reference via pin_user_pages_remote(), but the page is later handled as an invalid/reserved page, therefore it's not accounted against the user and not unpinned by our put_pfn(). Introducing special zero page handling in put_pfn() would resolve the leak, but without accounting of the zero page, a single user could still create enough mappings to generate a reference count overflow. The zero page is always resident, so for our purposes there's no reason to keep it pinned. Therefore, add a loop to walk pages returned from pin_user_pages_remote() and unpin any zero pages. Cc: stable@vger.kernel.org Reported-by: Luboslav Pivarc <lpivarc@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/166182871735.3518559.8884121293045337358.stgit@ome... Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/vfio/vfio_iommu_type1.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index fb663e0f365c..23b3f74f4c9e 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -528,6 +528,18 @@ static int vaddr_get_pfns(struct mm_struct *mm, unsigned long vaddr, ret = pin_user_pages_remote(mm, vaddr, npages, flags | FOLL_LONGTERM, pages, NULL, NULL); if (ret > 0) { + int i; + + /* + * The zero page is always resident, we don't need to pin it + * and it falls into our invalid/reserved test so we don't + * unpin in put_pfn(). Unpin all zero pages in the batch here. + */ + for (i = 0 ; i < ret; i++) { + if (unlikely(is_zero_pfn(page_to_pfn(pages[i])))) + unpin_user_page(pages[i]); + } + *pfn = page_to_pfn(pages[0]); goto done; } -- 2.25.1
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> stable inclusion from stable-v5.10.146 commit 561d86bd0e288ad236e4f208ce2ae418a6e0e431 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit fe0a2ac7c627b064c479ad0c3b25e531d342e048 ] This reverts commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b as it throws up a bunch of sparse warnings as reported by the kernel test robot. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/202209020044.CX2PfZzM-lkp@intel.com Fixes: 8cb339f1c1f0 ("usb: gadget: udc-xilinx: replace memcpy with memcpy_toio") Cc: stable@vger.kernel.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Piyush Mehta <piyush.mehta@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/gadget/udc/udc-xilinx.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index 01133dc42340..096f56a09e6a 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -496,11 +496,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, /* Get the Buffer address and copy the transmit data.*/ eprambase = (u32 __force *)(udc->addr + ep->rambase); if (ep->is_in) { - memcpy_toio(eprambase, bufferptr, bytestosend); + memcpy(eprambase, bufferptr, bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF0COUNT_OFFSET, bufferlen); } else { - memcpy_toio(bufferptr, eprambase, bytestosend); + memcpy(bufferptr, eprambase, bytestosend); } /* * Enable the buffer for transmission. @@ -514,11 +514,11 @@ static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req, eprambase = (u32 __force *)(udc->addr + ep->rambase + ep->ep_usb.maxpacket); if (ep->is_in) { - memcpy_toio(eprambase, bufferptr, bytestosend); + memcpy(eprambase, bufferptr, bytestosend); udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF1COUNT_OFFSET, bufferlen); } else { - memcpy_toio(bufferptr, eprambase, bytestosend); + memcpy(bufferptr, eprambase, bytestosend); } /* * Enable the buffer for transmission. @@ -1020,7 +1020,7 @@ static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req) udc->addr); length = req->usb_req.actual = min_t(u32, length, EP0_MAX_PACKET); - memcpy_toio(corebuf, req->usb_req.buf, length); + memcpy(corebuf, req->usb_req.buf, length); udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); } else { @@ -1746,7 +1746,7 @@ static void xudc_handle_setup(struct xusb_udc *udc) /* Load up the chapter 9 command buffer.*/ ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET); - memcpy_toio(&setup, ep0rambase, 8); + memcpy(&setup, ep0rambase, 8); udc->setup = setup; udc->setup.wValue = cpu_to_le16(setup.wValue); @@ -1833,7 +1833,7 @@ static void xudc_ep0_out(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + bytes_to_rx; - memcpy_toio(buffer, ep0rambase, bytes_to_rx); + memcpy(buffer, ep0rambase, bytes_to_rx); if (req->usb_req.length == req->usb_req.actual) { /* Data transfer completed get ready for Status stage */ @@ -1909,7 +1909,7 @@ static void xudc_ep0_in(struct xusb_udc *udc) (ep0->rambase << 2)); buffer = req->usb_req.buf + req->usb_req.actual; req->usb_req.actual = req->usb_req.actual + length; - memcpy_toio(ep0rambase, buffer, length); + memcpy(ep0rambase, buffer, length); } udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count); udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1); -- 2.25.1
From: Nathan Chancellor <nathan@kernel.org> stable inclusion from stable-v5.10.146 commit 050de2898039560060dc2edca3d032ef62132fc1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8cdd23c23c3d481a43b4aa03dcb5738812831115 ] Commit 97fed779f2a6 ("arm64: bti: Provide Kconfig for kernel mode BTI") disabled CONFIG_ARM64_BTI_KERNEL when CONFIG_GCOV_KERNEL was enabled and compiling with clang because of warnings that were seen with allmodconfig because LLVM was not emitting PAC/BTI instructions for compiler generated functions: | warning: some functions compiled with BTI and some compiled without BTI | warning: not setting BTI in feature flags This dependency was fine for avoiding the warnings with allmodconfig until commit 51c2ee6d121c ("Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTR"), which prevents CONFIG_GCOV_KERNEL from being enabled with clang 12.0.0 or older because those versions do not support the no_profile_instrument_function attribute. As a result, CONFIG_ARM64_BTI_KERNEL gets enabled with allmodconfig and there are more warnings like the ones above due to CONFIG_KASAN, which suffers from the same problem as CONFIG_GCOV_KERNEL. This was most likely not noticed at the time because allmodconfig + CONFIG_GCOV_KERNEL=n was not tested. defconfig + CONFIG_KASAN=y is enough to reproduce the same warnings as above. The root cause of the warnings was resolved in LLVM during the 12.0.0 release so rather than play whack-a-mole with the dependencies, just update CONFIG_ARM64_BTI_KERNEL to require clang 12.0.0, which will have all of the issues ironed out. Link: https://github.com/ClangBuiltLinux/linux/issues/1428 Link: https://github.com/ClangBuiltLinux/continuous-integration2/runs/3010034706?c... Link: https://github.com/ClangBuiltLinux/continuous-integration2/runs/3010035725?c... Link: https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc7... Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20210712214636.3134425-1-nathan@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Stable-dep-of: c0a454b9044f ("arm64/bti: Disable in kernel BTI when cross section thunks are broken") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm64/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index a0bba8e5426a..36e8cf00dbf9 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1785,7 +1785,8 @@ config ARM64_BTI_KERNEL depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697 depends on !CC_IS_GCC || GCC_VERSION >= 100100 - depends on !(CC_IS_CLANG && GCOV_KERNEL) + # https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc7... + depends on !CC_IS_CLANG || CLANG_VERSION >= 120000 depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS) help Build the kernel with Branch Target Identification annotations -- 2.25.1
From: Mark Brown <broonie@kernel.org> stable inclusion from stable-v5.10.146 commit 381f77b6a69a998a3c60ffea5c81965192ddc3d0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c0a454b9044fdc99486853aa424e5b3be2107078 ] GCC does not insert a `bti c` instruction at the beginning of a function when it believes that all callers reach the function through a direct branch[1]. Unfortunately the logic it uses to determine this is not sufficiently robust, for example not taking account of functions being placed in different sections which may be loaded separately, so we may still see thunks being generated to these functions. If that happens, the first instruction in the callee function will result in a Branch Target Exception due to the missing landing pad. While this has currently only been observed in the case of modules having their main code loaded sufficiently far from their init section to require thunks it could potentially happen for other cases so the safest thing is to disable BTI for the kernel when building with an affected toolchain. [1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671 Reported-by: D Scott Phillips <scott@os.amperecomputing.com> [Bits of the commit message are lifted from his report & workaround] Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220905142255.591990-1-broonie@kernel.org Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm64/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 36e8cf00dbf9..376931ab728a 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1785,6 +1785,8 @@ config ARM64_BTI_KERNEL depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697 depends on !CC_IS_GCC || GCC_VERSION >= 100100 + # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671 + depends on !CC_IS_GCC # https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc7... depends on !CC_IS_CLANG || CLANG_VERSION >= 120000 depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS) -- 2.25.1
From: Carl Yin(殷张成) <carl.yin@quectel.com> stable inclusion from stable-v5.10.146 commit 4d1d91a6343ee000c16778a8f28d9ad2b8116d39 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit f8f67eff6847f9b8d753fa029723bcc54296055a upstream. Add support for the following Quectel BG95 composition: 0x0203: Diag + GNSS + Modem + ECM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0203 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=71d3a21b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin <carl.yin@quectel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 211e03a20407..fdea22436200 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1138,6 +1138,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0203, 0xff), /* BG95-M3 */ + .driver_info = ZLP }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), -- 2.25.1
From: jerry meng <jerry-meng@foxmail.com> stable inclusion from stable-v5.10.146 commit a1926f11d9aa69ecca29cde7958d9a6dbdccc4aa category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit d640c4cb8f2f933c0ca896541f9de7fb1ae245f4 upstream. add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry meng <jerry-meng@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index fdea22436200..eea3dd18a044 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -256,6 +256,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_RM520N 0x0801 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 #define QUECTEL_PRODUCT_RM500K 0x7001 @@ -1161,6 +1162,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, -- 2.25.1
From: Mohan Kumar <mkumard@nvidia.com> stable inclusion from stable-v5.10.146 commit f109dd1607f83fbf7f28e59e7a1857a9ebccd9cc category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae upstream. Reduce the suspend time by setting depop delay to 10ms for tegra. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220913053641.23299-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index de710e6dd56b..e5e5ce70c626 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3839,6 +3839,7 @@ static int patch_tegra_hdmi(struct hda_codec *codec) if (err) return err; + codec->depop_delay = 10; codec->patch_ops.build_pcms = tegra_hdmi_build_pcms; spec = codec->spec; spec->chmap.ops.chmap_cea_alloc_validate_get_type = -- 2.25.1
From: Kai Vehmanen <kai.vehmanen@linux.intel.com> stable inclusion from stable-v5.10.146 commit c78bce842d476ddcbf18b2431178a72568ab726d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 4d40ceef4745536289012670103c59264e0fb3ec upstream. Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM capabilities as 0x3b56. In practise this allow use of HDMI/DP display audio via i915. BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/2751 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220912183716.2126312-1-kai.vehmanen@linux.intel.... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 6e69c76eddcb..3910a923e411 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2630,6 +2630,8 @@ static const struct pci_device_id azx_ids[] = { /* 5 Series/3400 */ { PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, + { PCI_DEVICE(0x8086, 0x3b57), + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Poulsbo */ { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE }, -- 2.25.1
From: huangwenhui <huangwenhuia@uniontech.com> stable inclusion from stable-v5.10.146 commit 62b0824c2c691fc55e8c8c6115f926a069bd579e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit cbcdf8c4d35cd74aee8581eb2f0453e0ecab7b05 upstream. Fixes headphone and headset microphone detection on Huawei WRT-WX9. Signed-off-by: huangwenhui <huangwenhuia@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220913054622.15979-1-huangwenhuia@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 78f4f684a3c7..4d744d283270 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9134,6 +9134,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), SND_PCI_QUIRK(0x1849, 0x1233, "ASRock NUC Box 1100", ALC233_FIXUP_NO_AUDIO_JACK), SND_PCI_QUIRK(0x19e5, 0x3204, "Huawei MACH-WX9", ALC256_FIXUP_HUAWEI_MACH_WX9_PINS), + SND_PCI_QUIRK(0x19e5, 0x320f, "Huawei WRT-WX9 ", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1b35, 0x1235, "CZC B20", ALC269_FIXUP_CZC_B20), SND_PCI_QUIRK(0x1b35, 0x1236, "CZC TMI", ALC269_FIXUP_CZC_TMI), SND_PCI_QUIRK(0x1b35, 0x1237, "CZC L101", ALC269_FIXUP_CZC_L101), -- 2.25.1
From: Callum Osmotherly <callum.osmotherly@gmail.com> stable inclusion from stable-v5.10.146 commit d4bad13828f0da2d2f8b521de580b8a2aa211ba4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit bdc9b7396f7d4d6533e70fd8d5472f505b5ef58f upstream. The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the previous Precision 5560. I replicated that patch onto this one, and can confirm that the audio is much better (the woofers are now working); I've tested it on my Dell Precision 5570. Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 4d744d283270..ecd310470aa8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8769,6 +8769,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0a9d, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0a9e, "Dell Latitude 5430", ALC269_FIXUP_DELL4_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0b19, "Dell XPS 15 9520", ALC289_FIXUP_DUAL_SPK), + SND_PCI_QUIRK(0x1028, 0x0b1a, "Dell Precision 5570", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), -- 2.25.1
From: Takashi Iwai <tiwai@suse.de> stable inclusion from stable-v5.10.146 commit 62ce31979fd525fb8046e4f18de0123cbb767be4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit b16c8f229a58eaddfc58aab447253464abd3c85e upstream. A few entries have been mistakenly inserted in wrong positions without considering the SSID ordering. Place them at right positions. Fixes: b7557267c233 ("ALSA: hda/realtek: Add quirk for ASUS GA402") Fixes: 94db9cc8f8fa ("ALSA: hda/realtek: Add quirk for ASUS GU603") Fixes: 739d0959fbed ("ALSA: hda: Add quirk for ASUS Flow x13") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220915154724.31634-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_realtek.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ecd310470aa8..1692480a6781 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8913,10 +8913,11 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK), SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A), + SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK), + SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x1740, "ASUS UX430UA", ALC295_FIXUP_ASUS_DACS), SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK), - SND_PCI_QUIRK(0x1043, 0x1662, "ASUS GV301QH", ALC294_FIXUP_ASUS_DUAL_SPK), SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS), SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1043, 0x18f1, "Asus FX505DT", ALC256_FIXUP_ASUS_HEADSET_MIC), @@ -8932,13 +8933,12 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), + SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), - SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), - SND_PCI_QUIRK(0x1043, 0x16b2, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS S101", ALC269_FIXUP_STEREO_DMIC), -- 2.25.1
From: "Luke D. Jones" <luke@ljones.dev> stable inclusion from stable-v5.10.146 commit 2f7cad4ecd0b93cd445b9eb364d446257aecddcd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit c611e659044168e7abcbae8ba1ea833521498fbb upstream. Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220915080921.35563-2-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_realtek.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1692480a6781..ae4fc7a34915 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6824,6 +6824,7 @@ enum { ALC294_FIXUP_ASUS_GU502_HP, ALC294_FIXUP_ASUS_GU502_PINS, ALC294_FIXUP_ASUS_GU502_VERBS, + ALC294_FIXUP_ASUS_G513_PINS, ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_GPIO_LED, @@ -8149,6 +8150,15 @@ static const struct hda_fixup alc269_fixups[] = { [ALC294_FIXUP_ASUS_GU502_HP] = { .type = HDA_FIXUP_FUNC, .v.func = alc294_fixup_gu502_hp, + }, + [ALC294_FIXUP_ASUS_G513_PINS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x03a11050 }, /* front HP mic */ + { 0x1a, 0x03a11c30 }, /* rear external mic */ + { 0x21, 0x03211420 }, /* front HP out */ + { } + }, }, [ALC294_FIXUP_ASUS_COEF_1B] = { .type = HDA_FIXUP_VERBS, @@ -8937,6 +8947,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), + SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), -- 2.25.1
From: "Luke D. Jones" <luke@ljones.dev> stable inclusion from stable-v5.10.146 commit 4cd84a9518e0ace5b758905684790018323584ee category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit bc2c23549ccd7105eb6ff0d4f0ac519285628673 upstream. Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220915080921.35563-3-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_realtek.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ae4fc7a34915..af4d2c691f76 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6825,6 +6825,7 @@ enum { ALC294_FIXUP_ASUS_GU502_PINS, ALC294_FIXUP_ASUS_GU502_VERBS, ALC294_FIXUP_ASUS_G513_PINS, + ALC285_FIXUP_ASUS_G533Z_PINS, ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_GPIO_LED, @@ -8160,6 +8161,15 @@ static const struct hda_fixup alc269_fixups[] = { { } }, }, + [ALC285_FIXUP_ASUS_G533Z_PINS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x14, 0x90170120 }, + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_G513_PINS, + }, [ALC294_FIXUP_ASUS_COEF_1B] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -8942,6 +8952,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), -- 2.25.1
From: "Luke D. Jones" <luke@ljones.dev> stable inclusion from stable-v5.10.146 commit 10c7e52d9585c7ceca8afd0d29c2c26ef238e889 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit ba1f818053b0668a1ce2fe86b840e81b592cc560 upstream. The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs as early models and the G14, this includes bass speakers which are by default mapped incorrectly to the 0x06 node. Add a quirk to use the same DAC pairs as the G14. Signed-off-by: Luke D. Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220915080921.35563-4-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index af4d2c691f76..10225c23b467 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8960,6 +8960,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), + SND_PCI_QUIRK(0x1043, 0x1c52, "ASUS Zephyrus G15 2022", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), -- 2.25.1
From: Callum Osmotherly <callum.osmotherly@gmail.com> stable inclusion from stable-v5.10.146 commit 213cdb2901e9a898a7f1657b749af798a599002b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 1885ff13d4c42910b37a0e3f7c2f182520f4eed1 upstream. Just as with the 5570 (and the other Dell laptops), this enables the two subwoofer speakers on the Dell Precision 5530 together with the main ones, significantly increasing the audio quality. I've tested this myself on a 5530 and can confirm it's working as expected. Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 10225c23b467..574fe798d512 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8774,6 +8774,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0871, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0872, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0873, "Dell Precision 3930", ALC255_FIXUP_DUMMY_LINEOUT_VERB), + SND_PCI_QUIRK(0x1028, 0x087d, "Dell Precision 5530", ALC289_FIXUP_DUAL_SPK), SND_PCI_QUIRK(0x1028, 0x08ad, "Dell WYSE AIO", ALC225_FIXUP_DELL_WYSE_AIO_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x08ae, "Dell WYSE NB", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0935, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), -- 2.25.1
From: Yi Liu <yi.l.liu@intel.com> stable inclusion from stable-v5.10.146 commit 0d99b180ce68a691d835c8292bc260379f1e20ba category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 154897807050c1161cb2660e502fc0470d46b986 upstream. Check 5-level paging capability for 57 bits address width instead of checking 1GB large page capability. Fixes: 53fc7ad6edf2 ("iommu/vt-d: Correctly calculate sagaw value of IOMMU") Cc: stable@vger.kernel.org Reported-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com> Link: https://lore.kernel.org/r/20220916071212.2223869-2-yi.l.liu@intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/iommu/intel/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index c92e7adfd958..671685e22c7b 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -569,7 +569,7 @@ static unsigned long __iommu_calculate_sagaw(struct intel_iommu *iommu) { unsigned long fl_sagaw, sl_sagaw; - fl_sagaw = BIT(2) | (cap_fl1gp_support(iommu->cap) ? BIT(3) : 0); + fl_sagaw = BIT(2) | (cap_5lp_support(iommu->cap) ? BIT(3) : 0); sl_sagaw = cap_sagaw(iommu->cap); /* Second level only. */ -- 2.25.1
From: Johan Hovold <johan@kernel.org> stable inclusion from stable-v5.10.146 commit c5ee36018d320c16713711e68e13dbef4a31ffee category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 763679f0eeff0185fc431498849bbc1c24460875 upstream. Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") tried to add an endpoint type sanity check for the single isochronous endpoint but instead broke the driver by checking the wrong descriptor or random data beyond the last endpoint descriptor. Make sure to check the right endpoint descriptor. Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") Cc: Oliver Neukum <oneukum@suse.com> Cc: stable@vger.kernel.org # 5.9 Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151027.27026-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/media/usb/b2c2/flexcop-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c index a2563c254080..2299d5cca8ff 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -512,7 +512,7 @@ static int flexcop_usb_init(struct flexcop_usb *fc_usb) if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1) return -ENODEV; - if (!usb_endpoint_is_isoc_in(&fc_usb->uintf->cur_altsetting->endpoint[1].desc)) + if (!usb_endpoint_is_isoc_in(&fc_usb->uintf->cur_altsetting->endpoint[0].desc)) return -ENODEV; switch (fc_usb->udev->speed) { -- 2.25.1
From: Ard Biesheuvel <ardb@kernel.org> stable inclusion from stable-v5.10.146 commit 3490ebe43505fb7b91e88a14019753a6c3f12d88 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 63bf28ceb3ebbe76048c3fb2987996ca1ae64f83 upstream. When booting the x86 kernel via EFI using the LoadImage/StartImage boot services [as opposed to the deprecated EFI handover protocol], the setup header is taken from the image directly, and given that EFI's LoadImage has no Linux/x86 specific knowledge regarding struct bootparams or struct setup_header, any absolute addresses in the setup header must originate from the file and not from a prior loading stage. Since we cannot generally predict where LoadImage() decides to load an image (*), such absolute addresses must be treated as suspect: even if a prior boot stage intended to make them point somewhere inside the [signed] image, there is no way to validate that, and if they point at an arbitrary location in memory, the setup_data nodes will not be covered by any signatures or TPM measurements either, and could be made to contain an arbitrary sequence of SETUP_xxx nodes, which could interfere quite badly with the early x86 boot sequence. (*) Note that, while LoadImage() does take a buffer/size tuple in addition to a device path, which can be used to provide the image contents directly, it will re-allocate such images, as the memory footprint of an image is generally larger than the PE/COFF file representation. Cc: <stable@vger.kernel.org> # v5.10+ Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/firmware/efi/libstub/x86-stub.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c index 3672539cb96e..5d0f1b1966fc 100644 --- a/drivers/firmware/efi/libstub/x86-stub.c +++ b/drivers/firmware/efi/libstub/x86-stub.c @@ -414,6 +414,13 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle, hdr->ramdisk_image = 0; hdr->ramdisk_size = 0; + /* + * Disregard any setup data that was provided by the bootloader: + * setup_data could be pointing anywhere, and we have no way of + * authenticating or validating the payload. + */ + hdr->setup_data = 0; + efi_stub_entry(handle, sys_table_arg, boot_params); /* not reached */ -- 2.25.1
From: Ard Biesheuvel <ardb@kernel.org> stable inclusion from stable-v5.10.146 commit 85f9a2d51e72f558c9bbf94cd1ae7c73f80034de category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 5f56a74cc0a6d9b9f8ba89cea29cd7c4774cb2b1 upstream. We currently check the MokSBState variable to decide whether we should treat UEFI secure boot as being disabled, even if the firmware thinks otherwise. This is used by shim to indicate that it is not checking signatures on boot images. In the kernel, we use this to relax lockdown policies. However, in cases where shim is not even being used, we don't want this variable to interfere with lockdown, given that the variable may be non-volatile and therefore persist across a reboot. This means setting it once will persistently disable lockdown checks on a given system. So switch to the mirrored version of this variable, called MokSBStateRT, which is supposed to be volatile, and this is something we can check. Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Peter Jones <pjones@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/firmware/efi/libstub/secureboot.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/firmware/efi/libstub/secureboot.c b/drivers/firmware/efi/libstub/secureboot.c index 5efc524b14be..a2be3a71bcf8 100644 --- a/drivers/firmware/efi/libstub/secureboot.c +++ b/drivers/firmware/efi/libstub/secureboot.c @@ -19,7 +19,7 @@ static const efi_char16_t efi_SetupMode_name[] = L"SetupMode"; /* SHIM variables */ static const efi_guid_t shim_guid = EFI_SHIM_LOCK_GUID; -static const efi_char16_t shim_MokSBState_name[] = L"MokSBState"; +static const efi_char16_t shim_MokSBState_name[] = L"MokSBStateRT"; /* * Determine whether we're in secure boot mode. @@ -53,8 +53,8 @@ enum efi_secureboot_mode efi_get_secureboot(void) /* * See if a user has put the shim into insecure mode. If so, and if the - * variable doesn't have the runtime attribute set, we might as well - * honor that. + * variable doesn't have the non-volatile attribute set, we might as + * well honor that. */ size = sizeof(moksbstate); status = get_efi_var(shim_MokSBState_name, &shim_guid, @@ -63,7 +63,7 @@ enum efi_secureboot_mode efi_get_secureboot(void) /* If it fails, we don't care why. Default to secure */ if (status != EFI_SUCCESS) goto secure_boot_enabled; - if (!(attr & EFI_VARIABLE_RUNTIME_ACCESS) && moksbstate == 1) + if (!(attr & EFI_VARIABLE_NON_VOLATILE) && moksbstate == 1) return efi_secureboot_mode_disabled; secure_boot_enabled: -- 2.25.1
From: Felix Fietkau <nbd@nbd.name> stable inclusion from stable-v5.10.146 commit bd5958ccfc451d3b61c7eb305fd53d9728791f79 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit c3a510e2b53785df31d882a773c4c0780b4c825f upstream. The code was accidentally shifting register values down by tid % 32 instead of (tid * field_size) % 32. Cc: stable@vger.kernel.org Fixes: a28bef561a5c ("mt76: mt7615: re-enable offloading of sequence number assignment") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220826182329.18155-1-nbd@nbd.name Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c index 1465a92ea3fc..b26617026e83 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c @@ -950,7 +950,7 @@ u32 mt7615_mac_get_sta_tid_sn(struct mt7615_dev *dev, int wcid, u8 tid) offset %= 32; val = mt76_rr(dev, addr); - val >>= (tid % 32); + val >>= offset; if (offset > 20) { addr += 4; -- 2.25.1
From: Bartosz Golaszewski <brgl@bgdev.pl> stable inclusion from stable-v5.10.146 commit bdea98b98f844bd8a983ca880893e509a8b4162f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit b7df41a6f79dfb18ba2203f8c5f0e9c0b9b57f68 upstream. We now remove the device's debugfs entries when unbinding the driver. This now causes a NULL-pointer dereference on module exit because the platform devices are unregistered *after* the global debugfs directory has been recursively removed. Fix it by unregistering the devices first. Fixes: 303e6da99429 ("gpio: mockup: remove gpio debugfs when remove device") Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpio/gpio-mockup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c index 780cba4e30d0..876027fdefc9 100644 --- a/drivers/gpio/gpio-mockup.c +++ b/drivers/gpio/gpio-mockup.c @@ -604,9 +604,9 @@ static int __init gpio_mockup_init(void) static void __exit gpio_mockup_exit(void) { + gpio_mockup_unregister_pdevs(); debugfs_remove_recursive(gpio_mockup_dbg_dir); platform_driver_unregister(&gpio_mockup_driver); - gpio_mockup_unregister_pdevs(); } module_init(gpio_mockup_init); -- 2.25.1
From: Meng Li <Meng.Li@windriver.com> stable inclusion from stable-v5.10.146 commit 657803b918e097e47d99d1489da83a603c36bcdd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 69bef19d6b9700e96285f4b4e28691cda3dcd0d1 upstream. When running gpio test on nxp-ls1028 platform with below command gpiomon --num-events=3 --rising-edge gpiochip1 25 There will be a warning trace as below: Call trace: free_irq+0x204/0x360 lineevent_free+0x64/0x70 gpio_ioctl+0x598/0x6a0 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x5c/0x130 ...... el0t_64_sync+0x1a0/0x1a4 The reason of this issue is that calling request_threaded_irq() function failed, and then lineevent_free() is invoked to release the resource. Since the lineevent_state::irq was already set, so the subsequent invocation of free_irq() would trigger the above warning call trace. To fix this issue, set the lineevent_state::irq after the IRQ register successfully. Fixes: 468242724143 ("gpiolib: cdev: refactor lineevent cleanup into lineevent_free") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Reviewed-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpio/gpiolib-cdev.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c index 2613881a66e6..381cfa26a4a1 100644 --- a/drivers/gpio/gpiolib-cdev.c +++ b/drivers/gpio/gpiolib-cdev.c @@ -1769,7 +1769,6 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) ret = -ENODEV; goto out_free_le; } - le->irq = irq; if (eflags & GPIOEVENT_REQUEST_RISING_EDGE) irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? @@ -1783,7 +1782,7 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) init_waitqueue_head(&le->wait); /* Request a thread to read the events */ - ret = request_threaded_irq(le->irq, + ret = request_threaded_irq(irq, lineevent_irq_handler, lineevent_irq_thread, irqflags, @@ -1792,6 +1791,8 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) if (ret) goto out_free_le; + le->irq = irq; + fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC); if (fd < 0) { ret = fd; -- 2.25.1
From: Al Viro <viro@zeniv.linux.org.uk> stable inclusion from stable-v5.10.146 commit 12fda27a412b62cf136dd2600bff11bc814ee86a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 762df359aa5849e010ef04c3ed79d57588ce17d9 upstream. riscv has an equivalent of arm bug fixed by 653d48b22166 ("arm: fix really nasty sigreturn bug"); if signal gets caught by an interrupt that hits when we have the right value in a0 (-513), *and* another signal gets delivered upon sigreturn() (e.g. included into the blocked mask for the first signal and posted while the handler had been running), the syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are in a syscall, after all) and a0 already restored to its original value (-513, which happens to be -ERESTARTNOINTR) and assume that we need to apply the usual syscall restart logics. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YxJEiSq%2FCGaL6Gm9@ZenIV/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/riscv/kernel/signal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/riscv/kernel/signal.c b/arch/riscv/kernel/signal.c index bc6841867b51..529c123cf0a4 100644 --- a/arch/riscv/kernel/signal.c +++ b/arch/riscv/kernel/signal.c @@ -121,6 +121,8 @@ SYSCALL_DEFINE0(rt_sigreturn) if (restore_altstack(&frame->uc.uc_stack)) goto badframe; + regs->cause = -1UL; + return regs->a0; badframe: -- 2.25.1
From: Marc Kleine-Budde <mkl@pengutronix.de> stable inclusion from stable-v5.10.146 commit fa57bb9b1ab5b970d70b0e9012af235ac15ae3db category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit a09721dd47c8468b3f2fdd73f40422699ffe26dd upstream. The following happened on an i.MX25 using flexcan with many packets on the bus: The rx-offload queue reached a length more than skb_queue_len_max. In can_rx_offload_offload_one() the drop variable was set to true which made the call to .mailbox_read() (here: flexcan_mailbox_read()) to _always_ return ERR_PTR(-ENOBUFS) and drop the rx'ed CAN frame. So can_rx_offload_offload_one() returned ERR_PTR(-ENOBUFS), too. can_rx_offload_irq_offload_fifo() looks as follows: | while (1) { | skb = can_rx_offload_offload_one(offload, 0); | if (IS_ERR(skb)) | continue; | if (!skb) | break; | ... | } The flexcan driver wrongly always returns ERR_PTR(-ENOBUFS) if drop is requested, even if there is no CAN frame pending. As the i.MX25 is a single core CPU, while the rx-offload processing is active, there is no thread to process packets from the offload queue. So the queue doesn't get any shorter and this results is a tight loop. Instead of always returning ERR_PTR(-ENOBUFS) if drop is requested, return NULL if no CAN frame is pending. Changes since v1: https://lore.kernel.org/all/20220810144536.389237-1-u.kleine-koenig@pengutro... - don't break in can_rx_offload_irq_offload_fifo() in case of an error, return NULL in flexcan_mailbox_read() in case of no pending CAN frame instead Fixes: 4e9c9484b085 ("can: rx-offload: Prepare for CAN FD support") Link: https://lore.kernel.org/all/20220811094254.1864367-1-mkl@pengutronix.de Cc: stable@vger.kernel.org # v5.5 Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Thorsten Scherer <t.scherer@eckelmann.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/can/flexcan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 7cbaac238ff6..429950241de3 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -954,11 +954,6 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload, u32 reg_ctrl, reg_id, reg_iflag1; int i; - if (unlikely(drop)) { - skb = ERR_PTR(-ENOBUFS); - goto mark_as_read; - } - mb = flexcan_get_mb(priv, n); if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) { @@ -987,6 +982,11 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload, reg_ctrl = priv->read(&mb->can_ctrl); } + if (unlikely(drop)) { + skb = ERR_PTR(-ENOBUFS); + goto mark_as_read; + } + if (reg_ctrl & FLEXCAN_MB_CNT_EDL) skb = alloc_canfd_skb(offload->dev, &cfd); else -- 2.25.1
From: Chao Yu <chao.yu@oppo.com> stable inclusion from stable-v5.10.146 commit 379ac7905ff3f0a6a4e507d3e9f710ec4fab9124 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 7e9c323c52b379d261a72dc7bd38120a761a93cd upstream. In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to out-of-memory, if it fails, return errno correctly rather than triggering panic via BUG_ON(); kernel BUG at mm/slub.c:5893! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: sysfs_slab_add+0x258/0x260 mm/slub.c:5973 __kmem_cache_create+0x60/0x118 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335 kmem_cache_create+0x1c/0x28 mm/slab_common.c:390 f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline] f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808 f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149 mount_bdev+0x1b8/0x210 fs/super.c:1400 f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512 legacy_get_tree+0x30/0x74 fs/fs_context.c:610 vfs_get_tree+0x40/0x140 fs/super.c:1530 do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040 path_mount+0x358/0x914 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __arm64_sys_mount+0x2f8/0x408 fs/namespace.c:3568 Cc: <stable@kernel.org> Fixes: 81819f0fc8285 ("SLUB core") Reported-by: syzbot+81684812ea68216e08c5@syzkaller.appspotmail.com Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Chao Yu <chao.yu@oppo.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- mm/slub.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index ad44734dbf72..ec1c3a376d36 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5622,7 +5622,8 @@ static char *create_unique_id(struct kmem_cache *s) char *name = kmalloc(ID_STR_LENGTH, GFP_KERNEL); char *p = name; - BUG_ON(!name); + if (!name) + return ERR_PTR(-ENOMEM); *p++ = ':'; /* @@ -5680,6 +5681,8 @@ static int sysfs_slab_add(struct kmem_cache *s) * for the symlinks. */ name = create_unique_id(s); + if (IS_ERR(name)) + return PTR_ERR(name); } s->kobj.kset = kset; -- 2.25.1
From: Mike Tipton <mdtipton@codeaurora.org> stable inclusion from stable-v5.10.146 commit 4e74179a164dcafc113e602413439ce1c332e7c6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit b95b668eaaa2574e8ee72f143c52075e9955177e upstream. We're only adding BCMs to the commit list in aggregate(), but there are cases where pre_aggregate() is called without subsequently calling aggregate(). In particular, in icc_sync_state() when a node with initial BW has zero requests. Since BCMs aren't added to the commit list in these cases, we don't actually send the zero BW request to HW. So the resources remain on unnecessarily. Add BCMs to the commit list in pre_aggregate() instead, which is always called even when there are no requests. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> [georgi: remove icc_sync_state for platforms with incomplete support] Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org> [dianders: dropped sm8350.c which isn't present in 5.10] Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/interconnect/qcom/icc-rpmh.c | 10 +++++----- drivers/interconnect/qcom/sm8150.c | 1 - drivers/interconnect/qcom/sm8250.c | 1 - 3 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c index f6fae64861ce..27cc5f03611c 100644 --- a/drivers/interconnect/qcom/icc-rpmh.c +++ b/drivers/interconnect/qcom/icc-rpmh.c @@ -20,13 +20,18 @@ void qcom_icc_pre_aggregate(struct icc_node *node) { size_t i; struct qcom_icc_node *qn; + struct qcom_icc_provider *qp; qn = node->data; + qp = to_qcom_provider(node->provider); for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { qn->sum_avg[i] = 0; qn->max_peak[i] = 0; } + + for (i = 0; i < qn->num_bcms; i++) + qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]); } EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate); @@ -44,10 +49,8 @@ int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, { size_t i; struct qcom_icc_node *qn; - struct qcom_icc_provider *qp; qn = node->data; - qp = to_qcom_provider(node->provider); if (!tag) tag = QCOM_ICC_TAG_ALWAYS; @@ -67,9 +70,6 @@ int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, *agg_avg += avg_bw; *agg_peak = max_t(u32, *agg_peak, peak_bw); - for (i = 0; i < qn->num_bcms; i++) - qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]); - return 0; } EXPORT_SYMBOL_GPL(qcom_icc_aggregate); diff --git a/drivers/interconnect/qcom/sm8150.c b/drivers/interconnect/qcom/sm8150.c index c76b2c7f9b10..b936196c229c 100644 --- a/drivers/interconnect/qcom/sm8150.c +++ b/drivers/interconnect/qcom/sm8150.c @@ -627,7 +627,6 @@ static struct platform_driver qnoc_driver = { .driver = { .name = "qnoc-sm8150", .of_match_table = qnoc_of_match, - .sync_state = icc_sync_state, }, }; module_platform_driver(qnoc_driver); diff --git a/drivers/interconnect/qcom/sm8250.c b/drivers/interconnect/qcom/sm8250.c index cc558fec74e3..40820043c8d3 100644 --- a/drivers/interconnect/qcom/sm8250.c +++ b/drivers/interconnect/qcom/sm8250.c @@ -643,7 +643,6 @@ static struct platform_driver qnoc_driver = { .driver = { .name = "qnoc-sm8250", .of_match_table = qnoc_of_match, - .sync_state = icc_sync_state, }, }; module_platform_driver(qnoc_driver); -- 2.25.1
From: Dave Chinner <dchinner@redhat.com> stable inclusion from stable-v5.10.146 commit a6bfdc157f853004c47e93357303f3626afaa872 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 9a5280b312e2e7898b6397b2ca3cfd03f67d7be1 upstream. [backport for 5.10.y] The O_TMPFILE creation implementation creates a specific order of operations for inode allocation/freeing and unlinked list modification. Currently both are serialised by the AGI, so the order doesn't strictly matter as long as the are both in the same transaction. However, if we want to move the unlinked list insertions largely out from under the AGI lock, then we have to be concerned about the order in which we do unlinked list modification operations. O_TMPFILE creation tells us this order is inode allocation/free, then unlinked list modification. Change xfs_ifree() to use this same ordering on unlinked list removal. This way we always guarantee that when we enter the iunlinked list removal code from this path, we already have the AGI locked and we don't have to worry about lock nesting AGI reads inside unlink list locks because it's already locked and attached to the transaction. We can do this safely as the inode freeing and unlinked list removal are done in the same transaction and hence are atomic operations with respect to log recovery. Reported-by: Frank Hofmann <fhofmann@cloudflare.com> Fixes: 298f7bec503f ("xfs: pin inode backing buffer to the inode log item") Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/xfs/xfs_inode.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index c9cf34a4fee8..2cf69cc5f2bf 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2726,14 +2726,13 @@ xfs_ifree_cluster( } /* - * This is called to return an inode to the inode free list. - * The inode should already be truncated to 0 length and have - * no pages associated with it. This routine also assumes that - * the inode is already a part of the transaction. + * This is called to return an inode to the inode free list. The inode should + * already be truncated to 0 length and have no pages associated with it. This + * routine also assumes that the inode is already a part of the transaction. * - * The on-disk copy of the inode will have been added to the list - * of unlinked inodes in the AGI. We need to remove the inode from - * that list atomically with respect to freeing it here. + * The on-disk copy of the inode will have been added to the list of unlinked + * inodes in the AGI. We need to remove the inode from that list atomically with + * respect to freeing it here. */ int xfs_ifree( @@ -2751,13 +2750,16 @@ xfs_ifree( ASSERT(ip->i_d.di_nblocks == 0); /* - * Pull the on-disk inode from the AGI unlinked list. + * Free the inode first so that we guarantee that the AGI lock is going + * to be taken before we remove the inode from the unlinked list. This + * makes the AGI lock -> unlinked list modification order the same as + * used in O_TMPFILE creation. */ - error = xfs_iunlink_remove(tp, ip); + error = xfs_difree(tp, ip->i_ino, &xic); if (error) return error; - error = xfs_difree(tp, ip->i_ino, &xic); + error = xfs_iunlink_remove(tp, ip); if (error) return error; -- 2.25.1
From: Dave Chinner <dchinner@redhat.com> stable inclusion from stable-v5.10.146 commit dce466286944389dd77b314e0d1eea6969d0e4d4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 1eb70f54c445fcbb25817841e774adb3d912f3e8 upstream. [backport for 5.10.y] xfs_repair catches fork size/format mismatches, but the in-kernel verifier doesn't, leading to null pointer failures when attempting to perform operations on the fork. This can occur in the xfs_dir_is_empty() where the in-memory fork format does not match the size and so the fork data pointer is accessed incorrectly. Note: this causes new failures in xfs/348 which is testing mode vs ftype mismatches. We now detect a regular file that has been changed to a directory or symlink mode as being corrupt because the data fork is for a symlink or directory should be in local form when there are only 3 bytes of data in the data fork. Hence the inode verify for the regular file now fires w/ -EFSCORRUPTED because the inode fork format does not match the format the corrupted mode says it should be in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/xfs/libxfs/xfs_inode_buf.c | 35 ++++++++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 9 deletions(-) diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c index 4d7410e49db4..37cf8909fada 100644 --- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -358,19 +358,36 @@ xfs_dinode_verify_fork( int whichfork) { uint32_t di_nextents = XFS_DFORK_NEXTENTS(dip, whichfork); + mode_t mode = be16_to_cpu(dip->di_mode); + uint32_t fork_size = XFS_DFORK_SIZE(dip, mp, whichfork); + uint32_t fork_format = XFS_DFORK_FORMAT(dip, whichfork); - switch (XFS_DFORK_FORMAT(dip, whichfork)) { + /* + * For fork types that can contain local data, check that the fork + * format matches the size of local data contained within the fork. + * + * For all types, check that when the size says the should be in extent + * or btree format, the inode isn't claiming it is in local format. + */ + if (whichfork == XFS_DATA_FORK) { + if (S_ISDIR(mode) || S_ISLNK(mode)) { + if (be64_to_cpu(dip->di_size) <= fork_size && + fork_format != XFS_DINODE_FMT_LOCAL) + return __this_address; + } + + if (be64_to_cpu(dip->di_size) > fork_size && + fork_format == XFS_DINODE_FMT_LOCAL) + return __this_address; + } + + switch (fork_format) { case XFS_DINODE_FMT_LOCAL: /* - * no local regular files yet + * No local regular files yet. */ - if (whichfork == XFS_DATA_FORK) { - if (S_ISREG(be16_to_cpu(dip->di_mode))) - return __this_address; - if (be64_to_cpu(dip->di_size) > - XFS_DFORK_SIZE(dip, mp, whichfork)) - return __this_address; - } + if (S_ISREG(mode) && whichfork == XFS_DATA_FORK) + return __this_address; if (di_nextents) return __this_address; break; -- 2.25.1
From: Brian Norris <briannorris@chromium.org> stable inclusion from stable-v5.10.146 commit 39f97714f3e2e76ba87e58ba141509902d61970b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e5467359a725de90b6b8d0dd865500f6373828ca ] The Gru-Bob board does not have a pull-up resistor on its WLAN_HOST_WAKE# pin, but Kevin does. The production/vendor kernel specified the pin configuration correctly as a pull-up, but this didn't get ported correctly to upstream. This means Bob's WLAN_HOST_WAKE# pin is floating, causing inconsistent wakeup behavior. Note that bt_host_wake_l has a similar dynamic, but apparently the upstream choice was to redundantly configure both internal and external pull-up on Kevin (see the "Kevin has an external pull up" comment in rk3399-gru.dtsi). This doesn't cause any functional problem, although it's perhaps wasteful. Fixes: 8559bbeeb849 ("arm64: dts: rockchip: add Google Bob") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220822164453.1.I75c57b48b0873766ec993bdfb7bc1e63... Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts | 5 +++++ arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 1 + 2 files changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index e6c1c94c8d69..07737b65d7a3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -87,3 +87,8 @@ h1_int_od_l: h1-int-od-l { }; }; }; + +&wlan_host_wake_l { + /* Kevin has an external pull up, but Bob does not. */ + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 1384dabbdf40..0d8458d55626 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -395,6 +395,7 @@ wifi_perst_l: wifi-perst-l { }; wlan_host_wake_l: wlan-host-wake-l { + /* Kevin has an external pull up, but Bob does not */ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; -- 2.25.1
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> stable inclusion from stable-v5.10.146 commit 3ca272b231d633f60bc1ca99b94b5d1302fc2b44 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit eeda05b5e92f51d9a09646ecb493f0a1e872a6ef ] Add callbacks for atomic_destroy_state, atomic_duplicate_state and atomic_reset to restore functionality of the DSI driver: this solves vblank timeouts when another bridge is present in the chain. Tested bridge chain: DSI <=> ANX7625 => aux-bus panel Fixes: 7f6335c6a258 ("drm/mediatek: Modify dsi funcs to atomic operations") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220721172727.146... Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/mediatek/mtk_dsi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index 7d37d2a01e3c..b8c1a3c1c517 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -791,10 +791,13 @@ static void mtk_dsi_bridge_atomic_post_disable(struct drm_bridge *bridge, static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = { .attach = mtk_dsi_bridge_attach, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, .atomic_disable = mtk_dsi_bridge_atomic_disable, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, .atomic_enable = mtk_dsi_bridge_atomic_enable, .atomic_pre_enable = mtk_dsi_bridge_atomic_pre_enable, .atomic_post_disable = mtk_dsi_bridge_atomic_post_disable, + .atomic_reset = drm_atomic_helper_bridge_reset, .mode_set = mtk_dsi_bridge_mode_set, }; -- 2.25.1
From: zain wang <wzz@rock-chips.com> stable inclusion from stable-v5.10.146 commit 1cc871fe6d3153e0a782a118061ba2f62c2f6850 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8123437cf46ea5a0f6ca5cb3c528d8b6db97b9c2 ] We've found the AUX channel to be less reliable with PCLK_EDP at a higher rate (typically 25 MHz). This is especially important on systems with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant use of AUX. According to Rockchip, using any rate other than 24 MHz can cause "problems between syncing the PHY an PCLK", which leads to all sorts of unreliabilities around register operations. Fixes: d67a38c5a623 ("arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20220830131212.v2.1.I98d30623f13b785ca77094d0c0fd4... Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 0d8458d55626..739937f70f8d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -237,6 +237,14 @@ &cdn_dp { &edp { status = "okay"; + /* + * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only + * set this here, because rk3399-gru.dtsi ensures we can generate this + * off GPLL=600MHz, whereas some other RK3399 boards may not. + */ + assigned-clocks = <&cru PCLK_EDP>; + assigned-clock-rates = <24000000>; + ports { edp_out: port@1 { reg = <1>; -- 2.25.1
From: Liang He <windhl@126.com> stable inclusion from stable-v5.10.146 commit aa11dae059a439af82bae541b134f8f53ac177b5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit f9fdb0b86f087c2b7f6c6168dd0985a3c1eda87e ] We should call of_node_put() for the reference returned by of_parse_phandle() in fail path or when it is not used anymore. Here we only need to move the of_node_put() before the check. Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users") Signed-off-by: Liang He <windhl@126.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220720073234.1255474-1-windhl@126.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/dma/ti/k3-udma-private.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/ti/k3-udma-private.c b/drivers/dma/ti/k3-udma-private.c index 8563a392f30b..dadab2feca08 100644 --- a/drivers/dma/ti/k3-udma-private.c +++ b/drivers/dma/ti/k3-udma-private.c @@ -31,14 +31,14 @@ struct udma_dev *of_xudma_dev_get(struct device_node *np, const char *property) } pdev = of_find_device_by_node(udma_node); + if (np != udma_node) + of_node_put(udma_node); + if (!pdev) { pr_debug("UDMA device not found\n"); return ERR_PTR(-EPROBE_DEFER); } - if (np != udma_node) - of_node_put(udma_node); - ud = platform_get_drvdata(pdev); if (!ud) { pr_debug("UDMA has not been probed\n"); -- 2.25.1
From: Fabio Estevam <festevam@denx.de> stable inclusion from stable-v5.10.146 commit 66f9470ffe42c30688984d9aed0a2d236b19cbc8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit a994b34b9abb9c08ee09e835b4027ff2147f9d94 ] The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 544110aaffc5..95bc7a5f61dd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -102,7 +102,6 @@ vcc3v3_sys: vcc3v3-sys { vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; -- 2.25.1
From: Igor Ryzhov <iryzhov@nfware.com> stable inclusion from stable-v5.10.146 commit 369ec4dab0972dd407d4ed9dae82f57a2a0fdf6e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 39aebedeaaa95757f5c1f2ddb5f43fdddbf478ca ] ct_sip_next_header and ct_sip_get_header return an absolute value of matchoff, not a shift from current dataoff. So dataoff should be assigned matchoff, not incremented by it. This issue can be seen in the scenario when there are multiple Contact headers and the first one is using a hostname and other headers use IP addresses. In this case, ct_sip_walk_headers will work as follows: The first ct_sip_get_header call to will find the first Contact header but will return -1 as the header uses a hostname. But matchoff will be changed to the offset of this header. After that, dataoff should be set to matchoff, so that the next ct_sip_get_header call find the next Contact header. But instead of assigning dataoff to matchoff, it is incremented by it, which is not correct, as matchoff is an absolute value of the offset. So on the next call to the ct_sip_get_header, dataoff will be incorrect, and the next Contact header may not be found at all. Fixes: 05e3ced297fe ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper") Signed-off-by: Igor Ryzhov <iryzhov@nfware.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/netfilter/nf_conntrack_sip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index b83dc9bf0a5d..78fd9122b70c 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -477,7 +477,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr, return ret; if (ret == 0) break; - dataoff += *matchoff; + dataoff = *matchoff; } *in_header = 0; } @@ -489,7 +489,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr, break; if (ret == 0) return ret; - dataoff += *matchoff; + dataoff = *matchoff; } if (in_header) -- 2.25.1
From: Brett Creeley <brett.creeley@intel.com> stable inclusion from stable-v5.10.146 commit 14446a1bc2a8c7d1ddcc893bd503a74ae288ec0b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ] The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/intel/iavf/iavf_txrx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.c b/drivers/net/ethernet/intel/iavf/iavf_txrx.c index e427b3a868e1..7c3c3a740700 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_txrx.c +++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.c @@ -114,8 +114,11 @@ u32 iavf_get_tx_pending(struct iavf_ring *ring, bool in_sw) { u32 head, tail; + /* underlying hardware might not allow access and/or always return + * 0 for the head/tail registers so just use the cached values + */ head = ring->next_to_clean; - tail = readl(ring->tail); + tail = ring->next_to_use; if (head != tail) return (head < tail) ? -- 2.25.1
From: zhang kai <zhangkaiheb@126.com> stable inclusion from stable-v5.10.146 commit e90001e1dd96cb98e53c6dab6d657df09d919e96 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1e60cebf82948cfdc9497ea4553bab125587593c ] using same source and destination ip/port for flow hash calculation within the two directions. Signed-off-by: zhang kai <zhangkaiheb@126.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 64ae13ed4784 ("net: core: fix flow symmetric hash") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/core/flow_dissector.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index 813c709c61cf..4cab52da8686 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -1484,7 +1484,7 @@ __be32 flow_get_u32_dst(const struct flow_keys *flow) } EXPORT_SYMBOL(flow_get_u32_dst); -/* Sort the source and destination IP (and the ports if the IP are the same), +/* Sort the source and destination IP and the ports, * to have consistent hash within the two directions */ static inline void __flow_hash_consistentify(struct flow_keys *keys) @@ -1495,11 +1495,11 @@ static inline void __flow_hash_consistentify(struct flow_keys *keys) case FLOW_DISSECTOR_KEY_IPV4_ADDRS: addr_diff = (__force u32)keys->addrs.v4addrs.dst - (__force u32)keys->addrs.v4addrs.src; - if ((addr_diff < 0) || - (addr_diff == 0 && - ((__force u16)keys->ports.dst < - (__force u16)keys->ports.src))) { + if (addr_diff < 0) swap(keys->addrs.v4addrs.src, keys->addrs.v4addrs.dst); + + if ((__force u16)keys->ports.dst < + (__force u16)keys->ports.src) { swap(keys->ports.src, keys->ports.dst); } break; @@ -1507,13 +1507,13 @@ static inline void __flow_hash_consistentify(struct flow_keys *keys) addr_diff = memcmp(&keys->addrs.v6addrs.dst, &keys->addrs.v6addrs.src, sizeof(keys->addrs.v6addrs.dst)); - if ((addr_diff < 0) || - (addr_diff == 0 && - ((__force u16)keys->ports.dst < - (__force u16)keys->ports.src))) { + if (addr_diff < 0) { for (i = 0; i < 4; i++) swap(keys->addrs.v6addrs.src.s6_addr32[i], keys->addrs.v6addrs.dst.s6_addr32[i]); + } + if ((__force u16)keys->ports.dst < + (__force u16)keys->ports.src) { swap(keys->ports.src, keys->ports.dst); } break; -- 2.25.1
From: Ludovic Cintrat <ludovic.cintrat@gatewatcher.com> stable inclusion from stable-v5.10.146 commit d298fc2eefd6bdc72bd6f07c653dac9be92305b9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 64ae13ed478428135cddc2f1113dff162d8112d4 ] __flow_hash_consistentify() wrongly swaps ipv4 addresses in few cases. This function is indirectly used by __skb_get_hash_symmetric(), which is used to fanout packets in AF_PACKET. Intrusion detection systems may be impacted by this issue. __flow_hash_consistentify() computes the addresses difference then swaps them if the difference is negative. In few cases src - dst and dst - src are both negative. The following snippet mimics __flow_hash_consistentify(): ``` #include <stdio.h> #include <stdint.h> int main(int argc, char** argv) { int diffs_d, diffd_s; uint32_t dst = 0xb225a8c0; /* 178.37.168.192 --> 192.168.37.178 */ uint32_t src = 0x3225a8c0; /* 50.37.168.192 --> 192.168.37.50 */ uint32_t dst2 = 0x3325a8c0; /* 51.37.168.192 --> 192.168.37.51 */ diffs_d = src - dst; diffd_s = dst - src; printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n", src, dst, diffs_d, diffs_d, diffd_s, diffd_s); diffs_d = src - dst2; diffd_s = dst2 - src; printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n", src, dst2, diffs_d, diffs_d, diffd_s, diffd_s); return 0; } ``` Results: src:3225a8c0 dst:b225a8c0, \ diff(s-d)=-2147483648(0x80000000) \ diff(d-s)=-2147483648(0x80000000) src:3225a8c0 dst:3325a8c0, \ diff(s-d)=-16777216(0xff000000) \ diff(d-s)=16777216(0x1000000) In the first case the addresses differences are always < 0, therefore __flow_hash_consistentify() always swaps, thus dst->src and src->dst packets have differents hashes. Fixes: c3f8324188fa8 ("net: Add full IPv6 addresses to flow_keys") Signed-off-by: Ludovic Cintrat <ludovic.cintrat@gatewatcher.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/core/flow_dissector.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index 4cab52da8686..7044a98d144d 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -1493,9 +1493,8 @@ static inline void __flow_hash_consistentify(struct flow_keys *keys) switch (keys->control.addr_type) { case FLOW_DISSECTOR_KEY_IPV4_ADDRS: - addr_diff = (__force u32)keys->addrs.v4addrs.dst - - (__force u32)keys->addrs.v4addrs.src; - if (addr_diff < 0) + if ((__force u32)keys->addrs.v4addrs.dst < + (__force u32)keys->addrs.v4addrs.src) swap(keys->addrs.v4addrs.src, keys->addrs.v4addrs.dst); if ((__force u16)keys->ports.dst < -- 2.25.1
From: Ioana Ciornei <ioana.ciornei@nxp.com> stable inclusion from stable-v5.10.146 commit 351f2d2c357f3470044c482bf30043c79c7bd174 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit ca2dccdeeb49a7e408112d681bf447984c845292 ] The Aquantia datasheet notes that after issuing a Processor-Intensive MDIO operation, like changing the low-power state of the device, the driver should wait for the operation to finish before issuing a new MDIO command. The new aqr107_wait_processor_intensive_op() function is added which can be used after these kind of MDIO operations. At the moment, we are only adding it at the end of the suspend/resume calls. The issue was identified on a board featuring the AQR113C PHY, on which commands like 'ip link (..) up / down' issued without any delays between them would render the link on the PHY to remain down. The issue was easy to reproduce with a one-liner: $ ip link set dev ethX down; ip link set dev ethX up; \ ip link set dev ethX down; ip link set dev ethX up; Fixes: ac9e81c230eb ("net: phy: aquantia: add suspend / resume callbacks for AQR107 family") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220906130451.1483448-1-ioana.ciornei@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/phy/aquantia_main.c | 53 ++++++++++++++++++++++++++++++--- 1 file changed, 49 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c index 75a62d1cc737..7045595f8d7d 100644 --- a/drivers/net/phy/aquantia_main.c +++ b/drivers/net/phy/aquantia_main.c @@ -89,6 +89,9 @@ #define VEND1_GLOBAL_FW_ID_MAJOR GENMASK(15, 8) #define VEND1_GLOBAL_FW_ID_MINOR GENMASK(7, 0) +#define VEND1_GLOBAL_GEN_STAT2 0xc831 +#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG BIT(15) + #define VEND1_GLOBAL_RSVD_STAT1 0xc885 #define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID GENMASK(7, 4) #define VEND1_GLOBAL_RSVD_STAT1_PROV_ID GENMASK(3, 0) @@ -123,6 +126,12 @@ #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2 BIT(1) #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 BIT(0) +/* Sleep and timeout for checking if the Processor-Intensive + * MDIO operation is finished + */ +#define AQR107_OP_IN_PROG_SLEEP 1000 +#define AQR107_OP_IN_PROG_TIMEOUT 100000 + struct aqr107_hw_stat { const char *name; int reg; @@ -569,16 +578,52 @@ static void aqr107_link_change_notify(struct phy_device *phydev) phydev_info(phydev, "Aquantia 1000Base-T2 mode active\n"); } +static int aqr107_wait_processor_intensive_op(struct phy_device *phydev) +{ + int val, err; + + /* The datasheet notes to wait at least 1ms after issuing a + * processor intensive operation before checking. + * We cannot use the 'sleep_before_read' parameter of read_poll_timeout + * because that just determines the maximum time slept, not the minimum. + */ + usleep_range(1000, 5000); + + err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, + VEND1_GLOBAL_GEN_STAT2, val, + !(val & VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG), + AQR107_OP_IN_PROG_SLEEP, + AQR107_OP_IN_PROG_TIMEOUT, false); + if (err) { + phydev_err(phydev, "timeout: processor-intensive MDIO operation\n"); + return err; + } + + return 0; +} + static int aqr107_suspend(struct phy_device *phydev) { - return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1, - MDIO_CTRL1_LPOWER); + int err; + + err = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1, + MDIO_CTRL1_LPOWER); + if (err) + return err; + + return aqr107_wait_processor_intensive_op(phydev); } static int aqr107_resume(struct phy_device *phydev) { - return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1, - MDIO_CTRL1_LPOWER); + int err; + + err = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1, + MDIO_CTRL1_LPOWER); + if (err) + return err; + + return aqr107_wait_processor_intensive_op(phydev); } static int aqr107_probe(struct phy_device *phydev) -- 2.25.1
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> stable inclusion from stable-v5.10.146 commit e7fafef9830c4a01e60f76e3860a9bef0262378d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d6adc251dd2fede6aaaf6c39f7e4ad799eda3758 ] According to the MPI specification, PCIe SGL buffers can not cross a 4 GB boundary. While allocating, if any buffer crosses the 4 GB boundary, then: - Release the already allocated memory pools; and - Reallocate them by changing the DMA coherent mask to 32-bit Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: e0e0747de0ea ("scsi: mpt3sas: Fix return value check of dma_get_required_mask()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 159 ++++++++++++++++++++-------- drivers/scsi/mpt3sas/mpt3sas_base.h | 1 + 2 files changed, 113 insertions(+), 47 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 58024699eeaf..ccff9e4f088d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2822,23 +2822,22 @@ static int _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) { struct sysinfo s; - int dma_mask; if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma || dma_get_required_mask(&pdev->dev) <= 32) - dma_mask = 32; + ioc->dma_mask = 32; /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) - dma_mask = 63; + ioc->dma_mask = 63; else - dma_mask = 64; + ioc->dma_mask = 64; - if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(dma_mask)) || - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(dma_mask))) + if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask)) || + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask))) return -ENODEV; - if (dma_mask > 32) { + if (ioc->dma_mask > 32) { ioc->base_add_sg_single = &_base_add_sg_single_64; ioc->sge_size = sizeof(Mpi2SGESimple64_t); } else { @@ -2848,7 +2847,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) si_meminfo(&s); ioc_info(ioc, "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n", - dma_mask, convert_to_kb(s.totalram)); + ioc->dma_mask, convert_to_kb(s.totalram)); return 0; } @@ -4902,10 +4901,10 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) dma_pool_free(ioc->pcie_sgl_dma_pool, ioc->pcie_sg_lookup[i].pcie_sgl, ioc->pcie_sg_lookup[i].pcie_sgl_dma); + ioc->pcie_sg_lookup[i].pcie_sgl = NULL; } dma_pool_destroy(ioc->pcie_sgl_dma_pool); } - if (ioc->config_page) { dexitprintk(ioc, ioc_info(ioc, "config_page(0x%p): free\n", @@ -4960,6 +4959,89 @@ mpt3sas_check_same_4gb_region(long reply_pool_start_address, u32 pool_sz) return 0; } +/** + * _base_reduce_hba_queue_depth- Retry with reduced queue depth + * @ioc: Adapter object + * + * Return: 0 for success, non-zero for failure. + **/ +static inline int +_base_reduce_hba_queue_depth(struct MPT3SAS_ADAPTER *ioc) +{ + int reduce_sz = 64; + + if ((ioc->hba_queue_depth - reduce_sz) > + (ioc->internal_depth + INTERNAL_SCSIIO_CMDS_COUNT)) { + ioc->hba_queue_depth -= reduce_sz; + return 0; + } else + return -ENOMEM; +} + +/** + * _base_allocate_pcie_sgl_pool - Allocating DMA'able memory + * for pcie sgl pools. + * @ioc: Adapter object + * @sz: DMA Pool size + * @ct: Chain tracker + * Return: 0 for success, non-zero for failure. + */ + +static int +_base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) +{ + int i = 0, j = 0; + struct chain_tracker *ct; + + ioc->pcie_sgl_dma_pool = + dma_pool_create("PCIe SGL pool", &ioc->pdev->dev, sz, + ioc->page_size, 0); + if (!ioc->pcie_sgl_dma_pool) { + ioc_err(ioc, "PCIe SGL pool: dma_pool_create failed\n"); + return -ENOMEM; + } + + ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz; + ioc->chains_per_prp_buffer = + min(ioc->chains_per_prp_buffer, ioc->chains_needed_per_io); + for (i = 0; i < ioc->scsiio_depth; i++) { + ioc->pcie_sg_lookup[i].pcie_sgl = + dma_pool_alloc(ioc->pcie_sgl_dma_pool, GFP_KERNEL, + &ioc->pcie_sg_lookup[i].pcie_sgl_dma); + if (!ioc->pcie_sg_lookup[i].pcie_sgl) { + ioc_err(ioc, "PCIe SGL pool: dma_pool_alloc failed\n"); + return -EAGAIN; + } + + if (!mpt3sas_check_same_4gb_region( + (long)ioc->pcie_sg_lookup[i].pcie_sgl, sz)) { + ioc_err(ioc, "PCIE SGLs are not in same 4G !! pcie sgl (0x%p) dma = (0x%llx)\n", + ioc->pcie_sg_lookup[i].pcie_sgl, + (unsigned long long) + ioc->pcie_sg_lookup[i].pcie_sgl_dma); + ioc->use_32bit_dma = true; + return -EAGAIN; + } + + for (j = 0; j < ioc->chains_per_prp_buffer; j++) { + ct = &ioc->chain_lookup[i].chains_per_smid[j]; + ct->chain_buffer = + ioc->pcie_sg_lookup[i].pcie_sgl + + (j * ioc->chain_segment_sz); + ct->chain_buffer_dma = + ioc->pcie_sg_lookup[i].pcie_sgl_dma + + (j * ioc->chain_segment_sz); + } + } + dinitprintk(ioc, ioc_info(ioc, + "PCIe sgl pool depth(%d), element_size(%d), pool_size(%d kB)\n", + ioc->scsiio_depth, sz, (sz * ioc->scsiio_depth)/1024)); + dinitprintk(ioc, ioc_info(ioc, + "Number of chains can fit in a PRP page(%d)\n", + ioc->chains_per_prp_buffer)); + return 0; +} + /** * base_alloc_rdpq_dma_pool - Allocating DMA'able memory * for reply queues. @@ -5058,7 +5140,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) unsigned short sg_tablesize; u16 sge_size; int i, j; - int ret = 0; + int ret = 0, rc = 0; struct chain_tracker *ct; dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); @@ -5357,6 +5439,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) * be required for NVMe PRP's, only each set of NVMe blocks will be * contiguous, so a new set is allocated for each possible I/O. */ + ioc->chains_per_prp_buffer = 0; if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) { nvme_blocks_needed = @@ -5371,43 +5454,11 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) goto out; } sz = nvme_blocks_needed * ioc->page_size; - ioc->pcie_sgl_dma_pool = - dma_pool_create("PCIe SGL pool", &ioc->pdev->dev, sz, 16, 0); - if (!ioc->pcie_sgl_dma_pool) { - ioc_info(ioc, "PCIe SGL pool: dma_pool_create failed\n"); - goto out; - } - - ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz; - ioc->chains_per_prp_buffer = min(ioc->chains_per_prp_buffer, - ioc->chains_needed_per_io); - - for (i = 0; i < ioc->scsiio_depth; i++) { - ioc->pcie_sg_lookup[i].pcie_sgl = dma_pool_alloc( - ioc->pcie_sgl_dma_pool, GFP_KERNEL, - &ioc->pcie_sg_lookup[i].pcie_sgl_dma); - if (!ioc->pcie_sg_lookup[i].pcie_sgl) { - ioc_info(ioc, "PCIe SGL pool: dma_pool_alloc failed\n"); - goto out; - } - for (j = 0; j < ioc->chains_per_prp_buffer; j++) { - ct = &ioc->chain_lookup[i].chains_per_smid[j]; - ct->chain_buffer = - ioc->pcie_sg_lookup[i].pcie_sgl + - (j * ioc->chain_segment_sz); - ct->chain_buffer_dma = - ioc->pcie_sg_lookup[i].pcie_sgl_dma + - (j * ioc->chain_segment_sz); - } - } - - dinitprintk(ioc, - ioc_info(ioc, "PCIe sgl pool depth(%d), element_size(%d), pool_size(%d kB)\n", - ioc->scsiio_depth, sz, - (sz * ioc->scsiio_depth) / 1024)); - dinitprintk(ioc, - ioc_info(ioc, "Number of chains can fit in a PRP page(%d)\n", - ioc->chains_per_prp_buffer)); + rc = _base_allocate_pcie_sgl_pool(ioc, sz); + if (rc == -ENOMEM) + return -ENOMEM; + else if (rc == -EAGAIN) + goto try_32bit_dma; total_sz += sz * ioc->scsiio_depth; } @@ -5577,6 +5628,19 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) ioc->shost->sg_tablesize); return 0; +try_32bit_dma: + _base_release_memory_pools(ioc); + if (ioc->use_32bit_dma && (ioc->dma_mask > 32)) { + /* Change dma coherent mask to 32 bit and reallocate */ + if (_base_config_dma_addressing(ioc, ioc->pdev) != 0) { + pr_err("Setting 32 bit coherent DMA mask Failed %s\n", + pci_name(ioc->pdev)); + return -ENODEV; + } + } else if (_base_reduce_hba_queue_depth(ioc) != 0) + return -ENOMEM; + goto retry_allocation; + out: return -ENOMEM; } @@ -7239,6 +7303,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->rdpq_array_enable_assigned = 0; ioc->use_32bit_dma = false; + ioc->dma_mask = 64; if (ioc->is_aero_ioc) ioc->base_readl = &_base_readl_aero; else diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 86774747fe25..0f5db94e0ccd 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1257,6 +1257,7 @@ struct MPT3SAS_ADAPTER { u16 thresh_hold; u8 high_iops_queues; u32 drv_support_bitmap; + u32 dma_mask; bool enable_sdev_max_qd; bool use_32bit_dma; -- 2.25.1
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> stable inclusion from stable-v5.10.146 commit 2b9aba0c5d58e141e32bb1bb4c7cd91d19f075b8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e0e0747de0ea3dd87cdbb0393311e17471a9baf1 ] Fix the incorrect return value check of dma_get_required_mask(). Due to this incorrect check, the driver was always setting the DMA mask to 63 bit. Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.co... Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index ccff9e4f088d..320dc1091cc7 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2825,7 +2825,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma || - dma_get_required_mask(&pdev->dev) <= 32) + dma_get_required_mask(&pdev->dev) <= DMA_BIT_MASK(32)) ioc->dma_mask = 32; /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) -- 2.25.1
From: Benjamin Poirier <bpoirier@nvidia.com> stable inclusion from stable-v5.10.146 commit dc209962c09397c88da6ec8d9147f16331fcb2b0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1d9a143ee3408349700f44a9197b7ae0e4faae5d ] There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 86247aba599e ("net: bonding: Unsync device addresses on ndo_stop") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/bonding/bond_3ad.c | 5 +++-- drivers/net/bonding/bond_main.c | 16 ++++------------ include/net/bond_3ad.h | 2 -- include/net/bonding.h | 3 +++ 4 files changed, 10 insertions(+), 16 deletions(-) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index e351dc638a5c..133c995f8177 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -86,8 +86,9 @@ static const u8 null_mac_addr[ETH_ALEN + 2] __long_aligned = { static u16 ad_ticks_per_sec; static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000; -static const u8 lacpdu_mcast_addr[ETH_ALEN + 2] __long_aligned = - MULTICAST_LACPDU_ADDR; +const u8 lacpdu_mcast_addr[ETH_ALEN + 2] __long_aligned = { + 0x01, 0x80, 0xC2, 0x00, 0x00, 0x02 +}; /* ================= main 802.3ad protocol functions ================== */ static int ad_lacpdu_send(struct port *port); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index dd6ab7f27dc9..f44bb064fb37 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -828,12 +828,8 @@ static void bond_hw_addr_flush(struct net_device *bond_dev, dev_uc_unsync(slave_dev, bond_dev); dev_mc_unsync(slave_dev, bond_dev); - if (BOND_MODE(bond) == BOND_MODE_8023AD) { - /* del lacpdu mc addr from mc list */ - u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; - - dev_mc_del(slave_dev, lacpdu_multicast); - } + if (BOND_MODE(bond) == BOND_MODE_8023AD) + dev_mc_del(slave_dev, lacpdu_mcast_addr); } /*--------------------------- Active slave change ---------------------------*/ @@ -2087,12 +2083,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, dev_uc_sync_multiple(slave_dev, bond_dev); netif_addr_unlock_bh(bond_dev); - if (BOND_MODE(bond) == BOND_MODE_8023AD) { - /* add lacpdu mc addr to mc list */ - u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; - - dev_mc_add(slave_dev, lacpdu_multicast); - } + if (BOND_MODE(bond) == BOND_MODE_8023AD) + dev_mc_add(slave_dev, lacpdu_mcast_addr); } bond->slave_cnt++; diff --git a/include/net/bond_3ad.h b/include/net/bond_3ad.h index 1a28f299a4c6..895eae18271f 100644 --- a/include/net/bond_3ad.h +++ b/include/net/bond_3ad.h @@ -15,8 +15,6 @@ #define PKT_TYPE_LACPDU cpu_to_be16(ETH_P_SLOW) #define AD_TIMER_INTERVAL 100 /*msec*/ -#define MULTICAST_LACPDU_ADDR {0x01, 0x80, 0xC2, 0x00, 0x00, 0x02} - #define AD_LACP_SLOW 0 #define AD_LACP_FAST 1 diff --git a/include/net/bonding.h b/include/net/bonding.h index 67d676059aa0..d9cc3f5602fb 100644 --- a/include/net/bonding.h +++ b/include/net/bonding.h @@ -763,6 +763,9 @@ extern struct rtnl_link_ops bond_link_ops; /* exported from bond_sysfs_slave.c */ extern const struct sysfs_ops slave_sysfs_ops; +/* exported from bond_3ad.c */ +extern const u8 lacpdu_mcast_addr[]; + static inline netdev_tx_t bond_tx_drop(struct net_device *dev, struct sk_buff *skb) { atomic_long_inc(&dev->tx_dropped); -- 2.25.1
From: Benjamin Poirier <bpoirier@nvidia.com> stable inclusion from stable-v5.10.146 commit e2b94a11223a8577657a66e5f8765ab8dabbdc54 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 86247aba599e5b07d7e828e6edaaebb0ef2b1158 ] Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former bond slaves after a bond has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls, via bond_hw_addr_flush(), at their expected location, bond_close(). Add dev_mc_add() call to bond_open() to match the above change. v3: * When adding or deleting a slave, only sync/unsync, add/del addresses if the bond is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/bonding/bond_main.c | 47 ++++++++++++++++++++++++--------- 1 file changed, 35 insertions(+), 12 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index f44bb064fb37..a0ae9c9bc297 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -849,7 +849,8 @@ static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active, if (bond->dev->flags & IFF_ALLMULTI) dev_set_allmulti(old_active->dev, -1); - bond_hw_addr_flush(bond->dev, old_active->dev); + if (bond->dev->flags & IFF_UP) + bond_hw_addr_flush(bond->dev, old_active->dev); } if (new_active) { @@ -860,10 +861,12 @@ static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active, if (bond->dev->flags & IFF_ALLMULTI) dev_set_allmulti(new_active->dev, 1); - netif_addr_lock_bh(bond->dev); - dev_uc_sync(new_active->dev, bond->dev); - dev_mc_sync(new_active->dev, bond->dev); - netif_addr_unlock_bh(bond->dev); + if (bond->dev->flags & IFF_UP) { + netif_addr_lock_bh(bond->dev); + dev_uc_sync(new_active->dev, bond->dev); + dev_mc_sync(new_active->dev, bond->dev); + netif_addr_unlock_bh(bond->dev); + } } } @@ -2078,13 +2081,15 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, } } - netif_addr_lock_bh(bond_dev); - dev_mc_sync_multiple(slave_dev, bond_dev); - dev_uc_sync_multiple(slave_dev, bond_dev); - netif_addr_unlock_bh(bond_dev); + if (bond_dev->flags & IFF_UP) { + netif_addr_lock_bh(bond_dev); + dev_mc_sync_multiple(slave_dev, bond_dev); + dev_uc_sync_multiple(slave_dev, bond_dev); + netif_addr_unlock_bh(bond_dev); - if (BOND_MODE(bond) == BOND_MODE_8023AD) - dev_mc_add(slave_dev, lacpdu_mcast_addr); + if (BOND_MODE(bond) == BOND_MODE_8023AD) + dev_mc_add(slave_dev, lacpdu_mcast_addr); + } } bond->slave_cnt++; @@ -2311,7 +2316,8 @@ static int __bond_release_one(struct net_device *bond_dev, if (old_flags & IFF_ALLMULTI) dev_set_allmulti(slave_dev, -1); - bond_hw_addr_flush(bond_dev, slave_dev); + if (old_flags & IFF_UP) + bond_hw_addr_flush(bond_dev, slave_dev); } slave_disable_netpoll(slave); @@ -3777,6 +3783,9 @@ static int bond_open(struct net_device *bond_dev) /* register to receive LACPDUs */ bond->recv_probe = bond_3ad_lacpdu_recv; bond_3ad_initiate_agg_selection(bond, 1); + + bond_for_each_slave(bond, slave, iter) + dev_mc_add(slave->dev, lacpdu_mcast_addr); } if (bond_mode_can_use_xmit_hash(bond)) @@ -3788,6 +3797,7 @@ static int bond_open(struct net_device *bond_dev) static int bond_close(struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); + struct slave *slave; bond_work_cancel_all(bond); bond->send_peer_notif = 0; @@ -3795,6 +3805,19 @@ static int bond_close(struct net_device *bond_dev) bond_alb_deinitialize(bond); bond->recv_probe = NULL; + if (bond_uses_primary(bond)) { + rcu_read_lock(); + slave = rcu_dereference(bond->curr_active_slave); + if (slave) + bond_hw_addr_flush(bond_dev, slave->dev); + rcu_read_unlock(); + } else { + struct list_head *iter; + + bond_for_each_slave(bond, slave, iter) + bond_hw_addr_flush(bond_dev, slave->dev); + } + return 0; } -- 2.25.1
From: Benjamin Poirier <bpoirier@nvidia.com> stable inclusion from stable-v5.10.146 commit 90fbcb26d666b31ce6d78fdac73358b2f116eb4e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ] Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/team/team.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 615f3776b4be..7117d559a32e 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1270,10 +1270,12 @@ static int team_port_add(struct team *team, struct net_device *port_dev, } } - netif_addr_lock_bh(dev); - dev_uc_sync_multiple(port_dev, dev); - dev_mc_sync_multiple(port_dev, dev); - netif_addr_unlock_bh(dev); + if (dev->flags & IFF_UP) { + netif_addr_lock_bh(dev); + dev_uc_sync_multiple(port_dev, dev); + dev_mc_sync_multiple(port_dev, dev); + netif_addr_unlock_bh(dev); + } port->index = -1; list_add_tail_rcu(&port->list, &team->port_list); @@ -1344,8 +1346,10 @@ static int team_port_del(struct team *team, struct net_device *port_dev) netdev_rx_handler_unregister(port_dev); team_port_disable_netpoll(port); vlan_vids_del_by_dev(port_dev, dev); - dev_uc_unsync(port_dev, dev); - dev_mc_unsync(port_dev, dev); + if (dev->flags & IFF_UP) { + dev_uc_unsync(port_dev, dev); + dev_mc_unsync(port_dev, dev); + } dev_close(port_dev); team_port_leave(team, port); @@ -1695,6 +1699,14 @@ static int team_open(struct net_device *dev) static int team_close(struct net_device *dev) { + struct team *team = netdev_priv(dev); + struct team_port *port; + + list_for_each_entry(port, &team->port_list, list) { + dev_uc_unsync(port->dev, dev); + dev_mc_unsync(port->dev, dev); + } + return 0; } -- 2.25.1
From: Heiko Schocher <hs@denx.de> stable inclusion from stable-v5.10.146 commit 1ac50c1ad40fe39141ea930e659b1fff2f4452fe category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit a7c48a0ab87ae52c087d663e83e56b8225ac4cce ] innolux_g121i1_l01 sets bpc to 6, so use the corresponding bus format: MEDIA_BUS_FMT_RGB666_1X7X3_SPWG. Fixes: 4ae13e486866 ("drm/panel: simple: Add more properties to Innolux G121I1-L01") Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220826165021.1592532-1-feste... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/panel/panel-simple.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index bf2c845ef3a2..b7b37082a9d7 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2201,7 +2201,7 @@ static const struct panel_desc innolux_g121i1_l01 = { .enable = 200, .disable = 20, }, - .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, .connector_type = DRM_MODE_CONNECTOR_LVDS, }; -- 2.25.1
From: Randy Dunlap <rdunlap@infradead.org> stable inclusion from stable-v5.10.146 commit a4121785a3a3d6ab78c0c48c42c5c1be785484a5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 502550123bee6a2ffa438409b5b9aad4d6db3a8c ] The lantiq WDT driver uses clk_get_io(), which is not exported, so export it to fix a build error: ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined! Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/mips/lantiq/clk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index 7a623684d9b5..2d5a0bcb0cec 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -50,6 +50,7 @@ struct clk *clk_get_io(void) { return &cpu_clk_generic[2]; } +EXPORT_SYMBOL_GPL(clk_get_io); struct clk *clk_get_ppe(void) { -- 2.25.1
From: Serge Semin <Sergey.Semin@baikalelectronics.ru> stable inclusion from stable-v5.10.146 commit 21b535fe5ecb10c872642013355433432bac88d6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e9f3f8f488005f6da3cfb66070706770ecaef747 ] commit 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") has changed the plat->interface field semantics from containing the PHY-mode to specifying the MAC-PCS interface mode. Due to that the loongson32 platform code will leave the phylink interface uninitialized with the PHY-mode intended by the means of the actual platform setup. The commit-author most likely has just missed the arch-specific code to fix. Let's mend the Loongson32 platform code then by assigning the PHY-mode to the phy_interface field of the STMMAC platform data. Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/mips/loongson32/common/platform.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c index 794c96c2a4cd..311dc1580bbd 100644 --- a/arch/mips/loongson32/common/platform.c +++ b/arch/mips/loongson32/common/platform.c @@ -98,7 +98,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) if (plat_dat->bus_id) { __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 | GMAC1_USE_UART0, LS1X_MUX_CTRL0); - switch (plat_dat->interface) { + switch (plat_dat->phy_interface) { case PHY_INTERFACE_MODE_RGMII: val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23); break; @@ -107,12 +107,12 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) break; default: pr_err("unsupported mii mode %d\n", - plat_dat->interface); + plat_dat->phy_interface); return -ENOTSUPP; } val &= ~GMAC1_SHUT; } else { - switch (plat_dat->interface) { + switch (plat_dat->phy_interface) { case PHY_INTERFACE_MODE_RGMII: val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01); break; @@ -121,7 +121,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) break; default: pr_err("unsupported mii mode %d\n", - plat_dat->interface); + plat_dat->phy_interface); return -ENOTSUPP; } val &= ~GMAC0_SHUT; @@ -131,7 +131,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) plat_dat = dev_get_platdata(&pdev->dev); val &= ~PHY_INTF_SELI; - if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) + if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII) val |= 0x4 << PHY_INTF_SELI_SHIFT; __raw_writel(val, LS1X_MUX_CTRL1); @@ -146,9 +146,9 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = { .bus_id = 0, .phy_addr = -1, #if defined(CONFIG_LOONGSON1_LS1B) - .interface = PHY_INTERFACE_MODE_MII, + .phy_interface = PHY_INTERFACE_MODE_MII, #elif defined(CONFIG_LOONGSON1_LS1C) - .interface = PHY_INTERFACE_MODE_RMII, + .phy_interface = PHY_INTERFACE_MODE_RMII, #endif .mdio_bus_data = &ls1x_mdio_bus_data, .dma_cfg = &ls1x_eth_dma_cfg, @@ -186,7 +186,7 @@ struct platform_device ls1x_eth0_pdev = { static struct plat_stmmacenet_data ls1x_eth1_pdata = { .bus_id = 1, .phy_addr = -1, - .interface = PHY_INTERFACE_MODE_MII, + .phy_interface = PHY_INTERFACE_MODE_MII, .mdio_bus_data = &ls1x_mdio_bus_data, .dma_cfg = &ls1x_eth_dma_cfg, .has_gmac = 1, -- 2.25.1
From: Norbert Zulinski <norbertx.zulinski@intel.com> stable inclusion from stable-v5.10.146 commit ccddb1db4b3c738310d0e37c2ffb9f4d27053809 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 66039eb9015eee4f7ff0c99b83c65c7ecb3c8190 ] Fix bad page state, free inappropriate page in handling dummy descriptor. iavf_build_skb now has to check not only if rx_buffer is NULL but also if size is zero, same thing in iavf_clean_rx_irq. Without this patch driver would free page that will be used by napi_build_skb. Fixes: a9f49e006030 ("iavf: Fix handling of dummy receive descriptors") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/intel/iavf/iavf_txrx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.c b/drivers/net/ethernet/intel/iavf/iavf_txrx.c index 7c3c3a740700..7ca3360ff1cb 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_txrx.c +++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.c @@ -1358,7 +1358,7 @@ static struct sk_buff *iavf_build_skb(struct iavf_ring *rx_ring, #endif struct sk_buff *skb; - if (!rx_buffer) + if (!rx_buffer || !size) return NULL; /* prefetch first cache line of first page */ va = page_address(rx_buffer->page) + rx_buffer->page_offset; @@ -1516,7 +1516,7 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget) /* exit if we failed to retrieve a buffer */ if (!skb) { rx_ring->rx_stats.alloc_buff_failed++; - if (rx_buffer) + if (rx_buffer && size) rx_buffer->pagecnt_bias++; break; } -- 2.25.1
From: Michal Jaron <michalx.jaron@intel.com> stable inclusion from stable-v5.10.146 commit 15e9724f6bb3cd50a902b53aaae5eb60a686cac3 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 399c98c4dc50b7eb7e9f24da7ffdda6f025676ef ] After setting port VLAN and MTU to 9000 on VF with ice driver there was an iavf error "PF returned error -5 (IAVF_ERR_PARAM) to our request 6". During queue configuration, VF's max packet size was set to IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN due to making some space for port VLAN as VF is not aware whether it's in a port VLAN. This mismatch in sizes caused ice to reject queue configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF to VF with GET_VF_RESOURCES msg but VF does not look at this. In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu received from pf with GET_VF_RESOURCES msg to make vf's max_frame_size dependent from pf. Add check if received max_mtu is not in eligible range then set it to IAVF_MAX_RXBUFFER. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c index ff479bf72144..5deee75bc436 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c +++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c @@ -241,11 +241,14 @@ int iavf_get_vf_config(struct iavf_adapter *adapter) void iavf_configure_queues(struct iavf_adapter *adapter) { struct virtchnl_vsi_queue_config_info *vqci; - struct virtchnl_queue_pair_info *vqpi; + int i, max_frame = adapter->vf_res->max_mtu; int pairs = adapter->num_active_queues; - int i, max_frame = IAVF_MAX_RXBUFFER; + struct virtchnl_queue_pair_info *vqpi; size_t len; + if (max_frame > IAVF_MAX_RXBUFFER || !max_frame) + max_frame = IAVF_MAX_RXBUFFER; + if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) { /* bail because we already have a command pending */ dev_err(&adapter->pdev->dev, "Cannot configure queues, command %d pending\n", -- 2.25.1
From: Michal Jaron <michalx.jaron@intel.com> stable inclusion from stable-v5.10.146 commit 65ee2bcc8990b0d0b2cf97eb89acebc0f1af0b05 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 372539def2824c43b6afe2403045b140f65c5acc ] Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- .../ethernet/intel/i40e/i40e_virtchnl_pf.c | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 1947c5a77550..ffff7de801af 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1985,6 +1985,25 @@ static void i40e_del_qch(struct i40e_vf *vf) } } +/** + * i40e_vc_get_max_frame_size + * @vf: pointer to the VF + * + * Max frame size is determined based on the current port's max frame size and + * whether a port VLAN is configured on this VF. The VF is not aware whether + * it's in a port VLAN so the PF needs to account for this in max frame size + * checks and sending the max frame size to the VF. + **/ +static u16 i40e_vc_get_max_frame_size(struct i40e_vf *vf) +{ + u16 max_frame_size = vf->pf->hw.phy.link_info.max_frame_size; + + if (vf->port_vlan_id) + max_frame_size -= VLAN_HLEN; + + return max_frame_size; +} + /** * i40e_vc_get_vf_resources_msg * @vf: pointer to the VF info @@ -2085,6 +2104,7 @@ static int i40e_vc_get_vf_resources_msg(struct i40e_vf *vf, u8 *msg) vfres->max_vectors = pf->hw.func_caps.num_msix_vectors_vf; vfres->rss_key_size = I40E_HKEY_ARRAY_SIZE; vfres->rss_lut_size = I40E_VF_HLUT_ARRAY_SIZE; + vfres->max_mtu = i40e_vc_get_max_frame_size(vf); if (vf->lan_vsi_idx) { vfres->vsi_res[0].vsi_id = vf->lan_vsi_id; -- 2.25.1
From: Michal Jaron <michalx.jaron@intel.com> stable inclusion from stable-v5.10.146 commit 2dbf487d6b381942665166be528fc06a61457206 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 198eb7e1b81d8ba676d0f4f120c092032ae69a8e ] While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000. Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/intel/i40e/i40e_main.c | 32 +++++++++++++++++---- 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 97009cbea779..c7f243ddbcf7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5733,6 +5733,26 @@ static int i40e_get_link_speed(struct i40e_vsi *vsi) } } +/** + * i40e_bw_bytes_to_mbits - Convert max_tx_rate from bytes to mbits + * @vsi: Pointer to vsi structure + * @max_tx_rate: max TX rate in bytes to be converted into Mbits + * + * Helper function to convert units before send to set BW limit + **/ +static u64 i40e_bw_bytes_to_mbits(struct i40e_vsi *vsi, u64 max_tx_rate) +{ + if (max_tx_rate < I40E_BW_MBPS_DIVISOR) { + dev_warn(&vsi->back->pdev->dev, + "Setting max tx rate to minimum usable value of 50Mbps.\n"); + max_tx_rate = I40E_BW_CREDIT_DIVISOR; + } else { + do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR); + } + + return max_tx_rate; +} + /** * i40e_set_bw_limit - setup BW limit for Tx traffic based on max_tx_rate * @vsi: VSI to be configured @@ -5755,10 +5775,10 @@ int i40e_set_bw_limit(struct i40e_vsi *vsi, u16 seid, u64 max_tx_rate) max_tx_rate, seid); return -EINVAL; } - if (max_tx_rate && max_tx_rate < 50) { + if (max_tx_rate && max_tx_rate < I40E_BW_CREDIT_DIVISOR) { dev_warn(&pf->pdev->dev, "Setting max tx rate to minimum usable value of 50Mbps.\n"); - max_tx_rate = 50; + max_tx_rate = I40E_BW_CREDIT_DIVISOR; } /* Tx rate credits are in values of 50Mbps, 0 is disabled */ @@ -7719,9 +7739,9 @@ static int i40e_setup_tc(struct net_device *netdev, void *type_data) if (pf->flags & I40E_FLAG_TC_MQPRIO) { if (vsi->mqprio_qopt.max_rate[0]) { - u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0]; + u64 max_tx_rate = i40e_bw_bytes_to_mbits(vsi, + vsi->mqprio_qopt.max_rate[0]); - do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR); ret = i40e_set_bw_limit(vsi, vsi->seid, max_tx_rate); if (!ret) { u64 credits = max_tx_rate; @@ -10366,10 +10386,10 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) } if (vsi->mqprio_qopt.max_rate[0]) { - u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0]; + u64 max_tx_rate = i40e_bw_bytes_to_mbits(vsi, + vsi->mqprio_qopt.max_rate[0]); u64 credits = 0; - do_div(max_tx_rate, I40E_BW_MBPS_DIVISOR); ret = i40e_set_bw_limit(vsi, vsi->seid, max_tx_rate); if (ret) goto end_unlock; -- 2.25.1
From: Íñigo Huguet <ihuguet@redhat.com> stable inclusion from stable-v5.10.146 commit b4afd3878f961d3517f27b3213730fceef77945c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit f232af4295653afa4ade3230462b3be15ad16419 ] In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but that's not correct if efx_sepparate_tx_channels is false. In that case, the offset is 0 because the tx queues are in the single existing channel at index 0, together with the rx queue. Without this fix, as soon as you try to send any traffic, it tries to get the tx queues from an uninitialized channel getting these errors: WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc] [...] RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc] [...] Call Trace: <IRQ> dev_hard_start_xmit+0xd7/0x230 sch_direct_xmit+0x9f/0x360 __dev_queue_xmit+0x890/0xa40 [...] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [...] RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc] [...] Call Trace: <IRQ> dev_hard_start_xmit+0xd7/0x230 sch_direct_xmit+0x9f/0x360 __dev_queue_xmit+0x890/0xa40 [...] Fixes: c308dfd1b43e ("sfc: fix wrong tx channel offset with efx_separate_tx_channels") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220914103648.16902-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/sfc/efx_channels.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/sfc/efx_channels.c b/drivers/net/ethernet/sfc/efx_channels.c index d0f1b2dc7dff..c49168ba7a4d 100644 --- a/drivers/net/ethernet/sfc/efx_channels.c +++ b/drivers/net/ethernet/sfc/efx_channels.c @@ -308,7 +308,7 @@ int efx_probe_interrupts(struct efx_nic *efx) efx->n_channels = 1 + (efx_separate_tx_channels ? 1 : 0); efx->n_rx_channels = 1; efx->n_tx_channels = 1; - efx->tx_channel_offset = 1; + efx->tx_channel_offset = efx_separate_tx_channels ? 1 : 0; efx->n_xdp_channels = 0; efx->xdp_channel_offset = efx->n_channels; efx->legacy_irq = efx->pci_dev->irq; -- 2.25.1
From: Íñigo Huguet <ihuguet@redhat.com> stable inclusion from stable-v5.10.146 commit b3b41d4d95d3822b2e459ecbc80d030ea6aec5e7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0a242eb2913a4aa3d6fbdb86559f27628e9466f3 ] Trying to get the channel from the tx_queue variable here is wrong because we can only be here if tx_queue is NULL, so we shouldn't dereference it. As the above comment in the code says, this is very unlikely to happen, but it's wrong anyway so let's fix it. I hit this issue because of a different bug that caused tx_queue to be NULL. If that happens, this is the error message that we get here: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [...] RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc] Fixes: 12804793b17c ("sfc: decouple TXQ type from label") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220914111135.21038-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/sfc/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c index 1665529a7271..fcc7de8ae2bf 100644 --- a/drivers/net/ethernet/sfc/tx.c +++ b/drivers/net/ethernet/sfc/tx.c @@ -545,7 +545,7 @@ netdev_tx_t efx_hard_start_xmit(struct sk_buff *skb, * previous packets out. */ if (!netdev_xmit_more()) - efx_tx_send_pending(tx_queue->channel); + efx_tx_send_pending(efx_get_tx_channel(efx, index)); return NETDEV_TX_OK; } -- 2.25.1
From: Javier Martinez Canillas <javierm@redhat.com> stable inclusion from stable-v5.10.146 commit bac7328fc0d7b30b80f85e8cc64e5c26044f48a7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit a0f25a6bb319aa05e04dcf51707c97c2881b4f47 ] The commit feeb07d0ca5a ("drm/hisilicon/hibmc: Make CONFIG_DRM_HISI_HIBMC depend on ARM64") made the driver Kconfig symbol to depend on ARM64 since it only supports that architecture and loading the module on others would lead to incorrect video modes being used. But it also prevented the driver to be built on other architectures which is useful to have compile test coverage when doing subsystem wide changes. Make the dependency instead to be (ARM64 || COMPILE_TEST), so the driver is buildable when the CONFIG_COMPILE_TEST option is enabled. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211216210936.3329977-1-javie... Stable-dep-of: d8a79c030549 ("drm/hisilicon: Add depends on MMU") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/hisilicon/hibmc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/hisilicon/hibmc/Kconfig b/drivers/gpu/drm/hisilicon/hibmc/Kconfig index 43943e980203..073adfe438dd 100644 --- a/drivers/gpu/drm/hisilicon/hibmc/Kconfig +++ b/drivers/gpu/drm/hisilicon/hibmc/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config DRM_HISI_HIBMC tristate "DRM Support for Hisilicon Hibmc" - depends on DRM && PCI && ARM64 + depends on DRM && PCI && (ARM64 || COMPILE_TEST) select DRM_KMS_HELPER select DRM_VRAM_HELPER select DRM_TTM -- 2.25.1
From: Randy Dunlap <rdunlap@infradead.org> stable inclusion from stable-v5.10.146 commit 9101e54c95cfad1008cff6fd5a6c3b4f18c6fb4a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d8a79c03054911c375a2252627a429c9bc4615b6 ] The Kconfig symbol depended on MMU but was dropped by the commit acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu") because it already had as a dependency ARM64 that already selects MMU. But later, commit a0f25a6bb319 ("drm/hisilicon/hibmc: Allow to be built if COMPILE_TEST is enabled") allowed the driver to be built for non-ARM64 when COMPILE_TEST is set but that could lead to unmet direct dependencies and linking errors. Prevent a kconfig warning when MMU is not enabled by making DRM_HISI_HIBMC depend on MMU. WARNING: unmet direct dependencies detected for DRM_TTM Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && MMU [=n] Selected by [m]: - DRM_TTM_HELPER [=m] && HAS_IOMEM [=y] && DRM [=m] - DRM_HISI_HIBMC [=m] && HAS_IOMEM [=y] && DRM [=m] && PCI [=y] && (ARM64 || COMPILE_TEST [=y]) Fixes: acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: John Stultz <jstultz@google.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220531025557.29593-1-rdunlap... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/hisilicon/hibmc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/hisilicon/hibmc/Kconfig b/drivers/gpu/drm/hisilicon/hibmc/Kconfig index 073adfe438dd..4e41c144a290 100644 --- a/drivers/gpu/drm/hisilicon/hibmc/Kconfig +++ b/drivers/gpu/drm/hisilicon/hibmc/Kconfig @@ -2,6 +2,7 @@ config DRM_HISI_HIBMC tristate "DRM Support for Hisilicon Hibmc" depends on DRM && PCI && (ARM64 || COMPILE_TEST) + depends on MMU select DRM_KMS_HELPER select DRM_VRAM_HELPER select DRM_TTM -- 2.25.1
From: Liang He <windhl@126.com> stable inclusion from stable-v5.10.146 commit d58815af89791b4514eae2083f6cf2df8cdf2798 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1c48709e6d9d353acaaac1d8e33474756b121d78 ] In of_mdiobus_register(), we should call of_node_put() for 'child' escaped out of for_each_available_child_of_node(). Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Co-developed-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/mdio/of_mdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c index ea0bf13e8ac3..5bae47f3da40 100644 --- a/drivers/net/mdio/of_mdio.c +++ b/drivers/net/mdio/of_mdio.c @@ -332,6 +332,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) return 0; unregister: + of_node_put(child); mdiobus_unregister(mdio); return rc; } -- 2.25.1
From: Alex Elder <elder@linaro.org> stable inclusion from stable-v5.10.146 commit c2cf0613d1ff43623f07c969357083aec4c15637 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d2fd2311de909a7f4e99b4bd11a19e6b671d6a6b ] Some build time checks in ipa_table_validate_build() assume that a DMA address is 64 bits wide. That is more restrictive than it has to be. A route or filter table is 64 bits wide no matter what the size of a DMA address is on the AP. The code actually uses a pointer to __le64 to access table entries, and a fixed constant IPA_TABLE_ENTRY_SIZE to describe the size of those entries. Loosen up two checks so they still verify some requirements, but such that they do not assume the size of a DMA address is 64 bits. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ipa/ipa_table.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/ipa/ipa_table.c b/drivers/net/ipa/ipa_table.c index 0747866d60ab..f26cb9d706da 100644 --- a/drivers/net/ipa/ipa_table.c +++ b/drivers/net/ipa/ipa_table.c @@ -126,13 +126,15 @@ static void ipa_table_validate_build(void) */ BUILD_BUG_ON(ARCH_DMA_MINALIGN % IPA_TABLE_ALIGN); - /* Filter and route tables contain DMA addresses that refer to - * filter or route rules. We use a fixed constant to represent - * the size of either type of table entry. Code in ipa_table_init() - * uses a pointer to __le64 to initialize table entriews. + /* Filter and route tables contain DMA addresses that refer + * to filter or route rules. But the size of a table entry + * is 64 bits regardless of what the size of an AP DMA address + * is. A fixed constant defines the size of an entry, and + * code in ipa_table_init() uses a pointer to __le64 to + * initialize tables. */ - BUILD_BUG_ON(IPA_TABLE_ENTRY_SIZE != sizeof(dma_addr_t)); - BUILD_BUG_ON(sizeof(dma_addr_t) != sizeof(__le64)); + BUILD_BUG_ON(sizeof(dma_addr_t) > IPA_TABLE_ENTRY_SIZE); + BUILD_BUG_ON(sizeof(__le64) != IPA_TABLE_ENTRY_SIZE); /* A "zero rule" is used to represent no filtering or no routing. * It is a 64-bit block of zeroed memory. Code in ipa_table_init() -- 2.25.1
From: Alex Elder <elder@linaro.org> stable inclusion from stable-v5.10.146 commit 3ae25aca3f892087737e6e25c8e0eb49eb8fe0fb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e5d4e96b44cf20330c970c3e30ea0a8c3a23feca ] We currently have a build-time check to ensure that the minimum DMA allocation alignment satisfies the constraint that IPA filter and route tables must point to rules that are 128-byte aligned. But what's really important is that the actual allocated DMA memory has that alignment, even if the minimum is smaller than that. Remove the BUILD_BUG_ON() call checking against minimim DMA alignment and instead verify at rutime that the allocated memory is properly aligned. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ipa/ipa_table.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/net/ipa/ipa_table.c b/drivers/net/ipa/ipa_table.c index f26cb9d706da..45e1d68b4694 100644 --- a/drivers/net/ipa/ipa_table.c +++ b/drivers/net/ipa/ipa_table.c @@ -118,14 +118,6 @@ /* Check things that can be validated at build time. */ static void ipa_table_validate_build(void) { - /* IPA hardware accesses memory 128 bytes at a time. Addresses - * referred to by entries in filter and route tables must be - * aligned on 128-byte byte boundaries. The only rule address - * ever use is the "zero rule", and it's aligned at the base - * of a coherent DMA allocation. - */ - BUILD_BUG_ON(ARCH_DMA_MINALIGN % IPA_TABLE_ALIGN); - /* Filter and route tables contain DMA addresses that refer * to filter or route rules. But the size of a table entry * is 64 bits regardless of what the size of an AP DMA address @@ -669,6 +661,18 @@ int ipa_table_init(struct ipa *ipa) if (!virt) return -ENOMEM; + /* We put the "zero rule" at the base of our table area. The IPA + * hardware requires rules to be aligned on a 128-byte boundary. + * Make sure the allocation satisfies this constraint. + */ + if (addr % IPA_TABLE_ALIGN) { + dev_err(dev, "table address %pad not %u-byte aligned\n", + &addr, IPA_TABLE_ALIGN); + dma_free_coherent(dev, size, virt, addr); + + return -ERANGE; + } + ipa->table_virt = virt; ipa->table_addr = addr; -- 2.25.1
From: Alex Elder <elder@linaro.org> stable inclusion from stable-v5.10.146 commit 48afea293a892e685b22d575393d5a4a662413b4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 437c78f976f5b39fc4b2a1c65903a229f55912dd ] It is possible for a 32 bit x86 build to use a 64 bit DMA address. There are two remaining spots where the IPA driver does a modulo operation to check alignment of a DMA address, and under certain conditions this can lead to a build error on i386 (at least). The alignment checks we're doing are for power-of-2 values, and this means the lower 32 bits of the DMA address can be used. This ensures both operands to the modulo operator are 32 bits wide. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ipa/gsi.c | 11 +++++++---- drivers/net/ipa/ipa_table.c | 9 ++++++--- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c index fe91b72eca36..e46d3622f9eb 100644 --- a/drivers/net/ipa/gsi.c +++ b/drivers/net/ipa/gsi.c @@ -1251,15 +1251,18 @@ static void gsi_evt_ring_rx_update(struct gsi_evt_ring *evt_ring, u32 index) /* Initialize a ring, including allocating DMA memory for its entries */ static int gsi_ring_alloc(struct gsi *gsi, struct gsi_ring *ring, u32 count) { - size_t size = count * GSI_RING_ELEMENT_SIZE; + u32 size = count * GSI_RING_ELEMENT_SIZE; struct device *dev = gsi->dev; dma_addr_t addr; - /* Hardware requires a 2^n ring size, with alignment equal to size */ + /* Hardware requires a 2^n ring size, with alignment equal to size. + * The size is a power of 2, so we can check alignment using just + * the bottom 32 bits for a DMA address of any size. + */ ring->virt = dma_alloc_coherent(dev, size, &addr, GFP_KERNEL); - if (ring->virt && addr % size) { + if (ring->virt && lower_32_bits(addr) % size) { dma_free_coherent(dev, size, ring->virt, addr); - dev_err(dev, "unable to alloc 0x%zx-aligned ring buffer\n", + dev_err(dev, "unable to alloc 0x%x-aligned ring buffer\n", size); return -EINVAL; /* Not a good error value, but distinct */ } else if (!ring->virt) { diff --git a/drivers/net/ipa/ipa_table.c b/drivers/net/ipa/ipa_table.c index 45e1d68b4694..4f15391aad5f 100644 --- a/drivers/net/ipa/ipa_table.c +++ b/drivers/net/ipa/ipa_table.c @@ -662,10 +662,13 @@ int ipa_table_init(struct ipa *ipa) return -ENOMEM; /* We put the "zero rule" at the base of our table area. The IPA - * hardware requires rules to be aligned on a 128-byte boundary. - * Make sure the allocation satisfies this constraint. + * hardware requires route and filter table rules to be aligned + * on a 128-byte boundary. As long as the alignment constraint + * is a power of 2, we can check alignment using just the bottom + * 32 bits for a DMA address of any size. */ - if (addr % IPA_TABLE_ALIGN) { + BUILD_BUG_ON(!is_power_of_2(IPA_TABLE_ALIGN)); + if (lower_32_bits(addr) % IPA_TABLE_ALIGN) { dev_err(dev, "table address %pad not %u-byte aligned\n", &addr, IPA_TABLE_ALIGN); dma_free_coherent(dev, size, virt, addr); -- 2.25.1
From: Alex Elder <elder@linaro.org> stable inclusion from stable-v5.10.146 commit 53b1715e283e91e0230ea217a612ee6790607b43 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 19aaf72c0c7a26ab7ffc655a6d84da6a379f899b ] A recent patch avoided doing 64-bit modulo operations by checking the alignment of some DMA allocations using only the lower 32 bits of the address. David Laight pointed out (after the fix was committed) that DMA allocations might already satisfy the alignment requirements. And he was right. Remove the alignment checks that occur after DMA allocation requests, and update comments to explain why the constraint is satisfied. The only place IPA_TABLE_ALIGN was used was to check the alignment; it is therefore no longer needed, so get rid of it. Add comments where GSI_RING_ELEMENT_SIZE and the tre_count and event_count channel data fields are defined to make explicit they are required to be powers of 2. Revise a comment in gsi_trans_pool_init_dma(), taking into account that dma_alloc_coherent() guarantees its result is aligned to a page size (or order thereof). Don't bother printing an error if a DMA allocation fails. Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ipa/gsi.c | 13 ++++--------- drivers/net/ipa/gsi_private.h | 2 +- drivers/net/ipa/gsi_trans.c | 9 ++++----- drivers/net/ipa/ipa_data.h | 4 ++-- drivers/net/ipa/ipa_table.c | 24 ++++++------------------ 5 files changed, 17 insertions(+), 35 deletions(-) diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c index e46d3622f9eb..64b12e462765 100644 --- a/drivers/net/ipa/gsi.c +++ b/drivers/net/ipa/gsi.c @@ -1256,18 +1256,13 @@ static int gsi_ring_alloc(struct gsi *gsi, struct gsi_ring *ring, u32 count) dma_addr_t addr; /* Hardware requires a 2^n ring size, with alignment equal to size. - * The size is a power of 2, so we can check alignment using just - * the bottom 32 bits for a DMA address of any size. + * The DMA address returned by dma_alloc_coherent() is guaranteed to + * be a power-of-2 number of pages, which satisfies the requirement. */ ring->virt = dma_alloc_coherent(dev, size, &addr, GFP_KERNEL); - if (ring->virt && lower_32_bits(addr) % size) { - dma_free_coherent(dev, size, ring->virt, addr); - dev_err(dev, "unable to alloc 0x%x-aligned ring buffer\n", - size); - return -EINVAL; /* Not a good error value, but distinct */ - } else if (!ring->virt) { + if (!ring->virt) return -ENOMEM; - } + ring->addr = addr; ring->count = count; diff --git a/drivers/net/ipa/gsi_private.h b/drivers/net/ipa/gsi_private.h index 1785c9d3344d..d58dce46e061 100644 --- a/drivers/net/ipa/gsi_private.h +++ b/drivers/net/ipa/gsi_private.h @@ -14,7 +14,7 @@ struct gsi_trans; struct gsi_ring; struct gsi_channel; -#define GSI_RING_ELEMENT_SIZE 16 /* bytes */ +#define GSI_RING_ELEMENT_SIZE 16 /* bytes; must be a power of 2 */ /* Return the entry that follows one provided in a transaction pool */ void *gsi_trans_pool_next(struct gsi_trans_pool *pool, void *element); diff --git a/drivers/net/ipa/gsi_trans.c b/drivers/net/ipa/gsi_trans.c index 6c3ed5b17b80..70c2b585f98d 100644 --- a/drivers/net/ipa/gsi_trans.c +++ b/drivers/net/ipa/gsi_trans.c @@ -153,11 +153,10 @@ int gsi_trans_pool_init_dma(struct device *dev, struct gsi_trans_pool *pool, size = __roundup_pow_of_two(size); total_size = (count + max_alloc - 1) * size; - /* The allocator will give us a power-of-2 number of pages. But we - * can't guarantee that, so request it. That way we won't waste any - * memory that would be available beyond the required space. - * - * Note that gsi_trans_pool_exit_dma() assumes the total allocated + /* The allocator will give us a power-of-2 number of pages + * sufficient to satisfy our request. Round up our requested + * size to avoid any unused space in the allocation. This way + * gsi_trans_pool_exit_dma() can assume the total allocated * size is exactly (count * size). */ total_size = get_order(total_size) << PAGE_SHIFT; diff --git a/drivers/net/ipa/ipa_data.h b/drivers/net/ipa/ipa_data.h index 7fc1058a5ca9..ba05e26c3c60 100644 --- a/drivers/net/ipa/ipa_data.h +++ b/drivers/net/ipa/ipa_data.h @@ -72,8 +72,8 @@ * that can be included in a single transaction. */ struct gsi_channel_data { - u16 tre_count; - u16 event_count; + u16 tre_count; /* must be a power of 2 */ + u16 event_count; /* must be a power of 2 */ u8 tlv_count; }; diff --git a/drivers/net/ipa/ipa_table.c b/drivers/net/ipa/ipa_table.c index 4f15391aad5f..087bcae29cc7 100644 --- a/drivers/net/ipa/ipa_table.c +++ b/drivers/net/ipa/ipa_table.c @@ -96,9 +96,6 @@ * ---------------------- */ -/* IPA hardware constrains filter and route tables alignment */ -#define IPA_TABLE_ALIGN 128 /* Minimum table alignment */ - /* Assignment of route table entries to the modem and AP */ #define IPA_ROUTE_MODEM_MIN 0 #define IPA_ROUTE_MODEM_COUNT 8 @@ -656,26 +653,17 @@ int ipa_table_init(struct ipa *ipa) ipa_table_validate_build(); + /* The IPA hardware requires route and filter table rules to be + * aligned on a 128-byte boundary. We put the "zero rule" at the + * base of the table area allocated here. The DMA address returned + * by dma_alloc_coherent() is guaranteed to be a power-of-2 number + * of pages, which satisfies the rule alignment requirement. + */ size = IPA_ZERO_RULE_SIZE + (1 + count) * IPA_TABLE_ENTRY_SIZE; virt = dma_alloc_coherent(dev, size, &addr, GFP_KERNEL); if (!virt) return -ENOMEM; - /* We put the "zero rule" at the base of our table area. The IPA - * hardware requires route and filter table rules to be aligned - * on a 128-byte boundary. As long as the alignment constraint - * is a power of 2, we can check alignment using just the bottom - * 32 bits for a DMA address of any size. - */ - BUILD_BUG_ON(!is_power_of_2(IPA_TABLE_ALIGN)); - if (lower_32_bits(addr) % IPA_TABLE_ALIGN) { - dev_err(dev, "table address %pad not %u-byte aligned\n", - &addr, IPA_TABLE_ALIGN); - dma_free_coherent(dev, size, virt, addr); - - return -ERANGE; - } - ipa->table_virt = virt; ipa->table_addr = addr; -- 2.25.1
From: Alex Elder <elder@linaro.org> stable inclusion from stable-v5.10.146 commit 8c1454d5493b8f7ae3f377e5146855223e70cf18 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 4ea29143ebe6c453f5fddc80ffe4ed046f44aa3a ] Entries in an IPA route or filter table are 64-bit little-endian addresses, each of which refers to a routing or filtering rule. The format of these table slots are fixed, but IPA_TABLE_ENTRY_SIZE is used to define their size. This symbol doesn't really add value, and I think it unnecessarily obscures what a table entry *is*. So get rid of IPA_TABLE_ENTRY_SIZE, and just use sizeof(__le64) in its place throughout the code. Update the comments in "ipa_table.c" to provide a little better explanation of these table slots. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ipa/ipa_cmd.c | 2 +- drivers/net/ipa/ipa_qmi.c | 10 +++---- drivers/net/ipa/ipa_table.c | 59 +++++++++++++++++++++---------------- drivers/net/ipa/ipa_table.h | 3 -- 4 files changed, 39 insertions(+), 35 deletions(-) diff --git a/drivers/net/ipa/ipa_cmd.c b/drivers/net/ipa/ipa_cmd.c index a47378b7d9b2..dc94ce035655 100644 --- a/drivers/net/ipa/ipa_cmd.c +++ b/drivers/net/ipa/ipa_cmd.c @@ -154,7 +154,7 @@ static void ipa_cmd_validate_build(void) * of entries, as and IPv4 and IPv6 route tables have the same number * of entries. */ -#define TABLE_SIZE (TABLE_COUNT_MAX * IPA_TABLE_ENTRY_SIZE) +#define TABLE_SIZE (TABLE_COUNT_MAX * sizeof(__le64)) #define TABLE_COUNT_MAX max_t(u32, IPA_ROUTE_COUNT_MAX, IPA_FILTER_COUNT_MAX) BUILD_BUG_ON(TABLE_SIZE > field_max(IP_FLTRT_FLAGS_HASH_SIZE_FMASK)); BUILD_BUG_ON(TABLE_SIZE > field_max(IP_FLTRT_FLAGS_NHASH_SIZE_FMASK)); diff --git a/drivers/net/ipa/ipa_qmi.c b/drivers/net/ipa/ipa_qmi.c index 1a87a49538c5..fea61657867e 100644 --- a/drivers/net/ipa/ipa_qmi.c +++ b/drivers/net/ipa/ipa_qmi.c @@ -308,12 +308,12 @@ init_modem_driver_req(struct ipa_qmi *ipa_qmi) mem = &ipa->mem[IPA_MEM_V4_ROUTE]; req.v4_route_tbl_info_valid = 1; req.v4_route_tbl_info.start = ipa->mem_offset + mem->offset; - req.v4_route_tbl_info.count = mem->size / IPA_TABLE_ENTRY_SIZE; + req.v4_route_tbl_info.count = mem->size / sizeof(__le64); mem = &ipa->mem[IPA_MEM_V6_ROUTE]; req.v6_route_tbl_info_valid = 1; req.v6_route_tbl_info.start = ipa->mem_offset + mem->offset; - req.v6_route_tbl_info.count = mem->size / IPA_TABLE_ENTRY_SIZE; + req.v6_route_tbl_info.count = mem->size / sizeof(__le64); mem = &ipa->mem[IPA_MEM_V4_FILTER]; req.v4_filter_tbl_start_valid = 1; @@ -352,8 +352,7 @@ init_modem_driver_req(struct ipa_qmi *ipa_qmi) req.v4_hash_route_tbl_info_valid = 1; req.v4_hash_route_tbl_info.start = ipa->mem_offset + mem->offset; - req.v4_hash_route_tbl_info.count = - mem->size / IPA_TABLE_ENTRY_SIZE; + req.v4_hash_route_tbl_info.count = mem->size / sizeof(__le64); } mem = &ipa->mem[IPA_MEM_V6_ROUTE_HASHED]; @@ -361,8 +360,7 @@ init_modem_driver_req(struct ipa_qmi *ipa_qmi) req.v6_hash_route_tbl_info_valid = 1; req.v6_hash_route_tbl_info.start = ipa->mem_offset + mem->offset; - req.v6_hash_route_tbl_info.count = - mem->size / IPA_TABLE_ENTRY_SIZE; + req.v6_hash_route_tbl_info.count = mem->size / sizeof(__le64); } mem = &ipa->mem[IPA_MEM_V4_FILTER_HASHED]; diff --git a/drivers/net/ipa/ipa_table.c b/drivers/net/ipa/ipa_table.c index 087bcae29cc7..bada98d7360c 100644 --- a/drivers/net/ipa/ipa_table.c +++ b/drivers/net/ipa/ipa_table.c @@ -27,28 +27,38 @@ /** * DOC: IPA Filter and Route Tables * - * The IPA has tables defined in its local shared memory that define filter - * and routing rules. Each entry in these tables contains a 64-bit DMA - * address that refers to DRAM (system memory) containing a rule definition. + * The IPA has tables defined in its local (IPA-resident) memory that define + * filter and routing rules. An entry in either of these tables is a little + * endian 64-bit "slot" that holds the address of a rule definition. (The + * size of these slots is 64 bits regardless of the host DMA address size.) + * + * Separate tables (both filter and route) used for IPv4 and IPv6. There + * are normally another set of "hashed" filter and route tables, which are + * used with a hash of message metadata. Hashed operation is not supported + * by all IPA hardware (IPA v4.2 doesn't support hashed tables). + * + * Rules can be in local memory or in DRAM (system memory). The offset of + * an object (such as a route or filter table) in IPA-resident memory must + * 128-byte aligned. An object in system memory (such as a route or filter + * rule) must be at an 8-byte aligned address. We currently only place + * route or filter rules in system memory. + * * A rule consists of a contiguous block of 32-bit values terminated with * 32 zero bits. A special "zero entry" rule consisting of 64 zero bits * represents "no filtering" or "no routing," and is the reset value for - * filter or route table rules. Separate tables (both filter and route) - * used for IPv4 and IPv6. Additionally, there can be hashed filter or - * route tables, which are used when a hash of message metadata matches. - * Hashed operation is not supported by all IPA hardware. + * filter or route table rules. * * Each filter rule is associated with an AP or modem TX endpoint, though - * not all TX endpoints support filtering. The first 64-bit entry in a + * not all TX endpoints support filtering. The first 64-bit slot in a * filter table is a bitmap indicating which endpoints have entries in * the table. The low-order bit (bit 0) in this bitmap represents a * special global filter, which applies to all traffic. This is not * used in the current code. Bit 1, if set, indicates that there is an - * entry (i.e. a DMA address referring to a rule) for endpoint 0 in the - * table. Bit 2, if set, indicates there is an entry for endpoint 1, - * and so on. Space is set aside in IPA local memory to hold as many - * filter table entries as might be required, but typically they are not - * all used. + * entry (i.e. slot containing a system address referring to a rule) for + * endpoint 0 in the table. Bit 3, if set, indicates there is an entry + * for endpoint 2, and so on. Space is set aside in IPA local memory to + * hold as many filter table entries as might be required, but typically + * they are not all used. * * The AP initializes all entries in a filter table to refer to a "zero" * entry. Once initialized the modem and AP update the entries for @@ -122,8 +132,7 @@ static void ipa_table_validate_build(void) * code in ipa_table_init() uses a pointer to __le64 to * initialize tables. */ - BUILD_BUG_ON(sizeof(dma_addr_t) > IPA_TABLE_ENTRY_SIZE); - BUILD_BUG_ON(sizeof(__le64) != IPA_TABLE_ENTRY_SIZE); + BUILD_BUG_ON(sizeof(dma_addr_t) > sizeof(__le64)); /* A "zero rule" is used to represent no filtering or no routing. * It is a 64-bit block of zeroed memory. Code in ipa_table_init() @@ -154,7 +163,7 @@ ipa_table_valid_one(struct ipa *ipa, bool route, bool ipv6, bool hashed) else mem = hashed ? &ipa->mem[IPA_MEM_V4_ROUTE_HASHED] : &ipa->mem[IPA_MEM_V4_ROUTE]; - size = IPA_ROUTE_COUNT_MAX * IPA_TABLE_ENTRY_SIZE; + size = IPA_ROUTE_COUNT_MAX * sizeof(__le64); } else { if (ipv6) mem = hashed ? &ipa->mem[IPA_MEM_V6_FILTER_HASHED] @@ -162,7 +171,7 @@ ipa_table_valid_one(struct ipa *ipa, bool route, bool ipv6, bool hashed) else mem = hashed ? &ipa->mem[IPA_MEM_V4_FILTER_HASHED] : &ipa->mem[IPA_MEM_V4_FILTER]; - size = (1 + IPA_FILTER_COUNT_MAX) * IPA_TABLE_ENTRY_SIZE; + size = (1 + IPA_FILTER_COUNT_MAX) * sizeof(__le64); } if (!ipa_cmd_table_valid(ipa, mem, route, ipv6, hashed)) @@ -261,8 +270,8 @@ static void ipa_table_reset_add(struct gsi_trans *trans, bool filter, if (filter) first++; /* skip over bitmap */ - offset = mem->offset + first * IPA_TABLE_ENTRY_SIZE; - size = count * IPA_TABLE_ENTRY_SIZE; + offset = mem->offset + first * sizeof(__le64); + size = count * sizeof(__le64); addr = ipa_table_addr(ipa, false, count); ipa_cmd_dma_shared_mem_add(trans, offset, size, addr, true); @@ -446,11 +455,11 @@ static void ipa_table_init_add(struct gsi_trans *trans, bool filter, count = 1 + hweight32(ipa->filter_map); hash_count = hash_mem->size ? count : 0; } else { - count = mem->size / IPA_TABLE_ENTRY_SIZE; - hash_count = hash_mem->size / IPA_TABLE_ENTRY_SIZE; + count = mem->size / sizeof(__le64); + hash_count = hash_mem->size / sizeof(__le64); } - size = count * IPA_TABLE_ENTRY_SIZE; - hash_size = hash_count * IPA_TABLE_ENTRY_SIZE; + size = count * sizeof(__le64); + hash_size = hash_count * sizeof(__le64); addr = ipa_table_addr(ipa, filter, count); hash_addr = ipa_table_addr(ipa, filter, hash_count); @@ -659,7 +668,7 @@ int ipa_table_init(struct ipa *ipa) * by dma_alloc_coherent() is guaranteed to be a power-of-2 number * of pages, which satisfies the rule alignment requirement. */ - size = IPA_ZERO_RULE_SIZE + (1 + count) * IPA_TABLE_ENTRY_SIZE; + size = IPA_ZERO_RULE_SIZE + (1 + count) * sizeof(__le64); virt = dma_alloc_coherent(dev, size, &addr, GFP_KERNEL); if (!virt) return -ENOMEM; @@ -691,7 +700,7 @@ void ipa_table_exit(struct ipa *ipa) struct device *dev = &ipa->pdev->dev; size_t size; - size = IPA_ZERO_RULE_SIZE + (1 + count) * IPA_TABLE_ENTRY_SIZE; + size = IPA_ZERO_RULE_SIZE + (1 + count) * sizeof(__le64); dma_free_coherent(dev, size, ipa->table_virt, ipa->table_addr); ipa->table_addr = 0; diff --git a/drivers/net/ipa/ipa_table.h b/drivers/net/ipa/ipa_table.h index 78038d14fcea..dc9ff21dbdfb 100644 --- a/drivers/net/ipa/ipa_table.h +++ b/drivers/net/ipa/ipa_table.h @@ -10,9 +10,6 @@ struct ipa; -/* The size of a filter or route table entry */ -#define IPA_TABLE_ENTRY_SIZE sizeof(__le64) /* Holds a physical address */ - /* The maximum number of filter table entries (IPv4, IPv6; hashed or not) */ #define IPA_FILTER_COUNT_MAX 14 -- 2.25.1
From: Alex Elder <elder@linaro.org> stable inclusion from stable-v5.10.146 commit ddd47f1cd67dfcaedaead3027053d5dc6e515815 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit cf412ec333250cb82bafe57169204e14a9f1c2ac ] IPA can route packets between IPA-connected entities. The AP and modem are currently the only such entities supported, and no routing is required to transfer packets between them. The number of entries in each routing table is fixed, and defined at initialization time. Some of these entries are designated for use by the modem, and the rest are available for the AP to use. The AP sends a QMI message to the modem which describes (among other things) information about routing table memory available for the modem to use. Currently the QMI initialization packet gives wrong information in its description of routing tables. What *should* be supplied is the maximum index that the modem can use for the routing table memory located at a given location. The current code instead supplies the total *number* of routing table entries. Furthermore, the modem is granted the entire table, not just the subset it's supposed to use. This patch fixes this. First, the ipa_mem_bounds structure is generalized so its "end" field can be interpreted either as a final byte offset, or a final array index. Second, the IPv4 and IPv6 (non-hashed and hashed) table information fields in the QMI ipa_init_modem_driver_req structure are changed to be ipa_mem_bounds rather than ipa_mem_array structures. Third, we set the "end" value for each routing table to be the last index, rather than setting the "count" to be the number of indices. Finally, instead of allowing the modem to use all of a routing table's memory, it is limited to just the portion meant to be used by the modem. In all versions of IPA currently supported, that is IPA_ROUTE_MODEM_COUNT (8) entries. Update a few comments for clarity. Fixes: 530f9216a9537 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220913204602.1803004-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ipa/ipa_qmi.c | 8 ++++---- drivers/net/ipa/ipa_qmi_msg.c | 8 ++++---- drivers/net/ipa/ipa_qmi_msg.h | 37 ++++++++++++++++++++--------------- drivers/net/ipa/ipa_table.c | 2 -- drivers/net/ipa/ipa_table.h | 3 +++ 5 files changed, 32 insertions(+), 26 deletions(-) diff --git a/drivers/net/ipa/ipa_qmi.c b/drivers/net/ipa/ipa_qmi.c index fea61657867e..880ec353f958 100644 --- a/drivers/net/ipa/ipa_qmi.c +++ b/drivers/net/ipa/ipa_qmi.c @@ -308,12 +308,12 @@ init_modem_driver_req(struct ipa_qmi *ipa_qmi) mem = &ipa->mem[IPA_MEM_V4_ROUTE]; req.v4_route_tbl_info_valid = 1; req.v4_route_tbl_info.start = ipa->mem_offset + mem->offset; - req.v4_route_tbl_info.count = mem->size / sizeof(__le64); + req.v4_route_tbl_info.end = IPA_ROUTE_MODEM_COUNT - 1; mem = &ipa->mem[IPA_MEM_V6_ROUTE]; req.v6_route_tbl_info_valid = 1; req.v6_route_tbl_info.start = ipa->mem_offset + mem->offset; - req.v6_route_tbl_info.count = mem->size / sizeof(__le64); + req.v6_route_tbl_info.end = IPA_ROUTE_MODEM_COUNT - 1; mem = &ipa->mem[IPA_MEM_V4_FILTER]; req.v4_filter_tbl_start_valid = 1; @@ -352,7 +352,7 @@ init_modem_driver_req(struct ipa_qmi *ipa_qmi) req.v4_hash_route_tbl_info_valid = 1; req.v4_hash_route_tbl_info.start = ipa->mem_offset + mem->offset; - req.v4_hash_route_tbl_info.count = mem->size / sizeof(__le64); + req.v4_hash_route_tbl_info.end = IPA_ROUTE_MODEM_COUNT - 1; } mem = &ipa->mem[IPA_MEM_V6_ROUTE_HASHED]; @@ -360,7 +360,7 @@ init_modem_driver_req(struct ipa_qmi *ipa_qmi) req.v6_hash_route_tbl_info_valid = 1; req.v6_hash_route_tbl_info.start = ipa->mem_offset + mem->offset; - req.v6_hash_route_tbl_info.count = mem->size / sizeof(__le64); + req.v6_hash_route_tbl_info.end = IPA_ROUTE_MODEM_COUNT - 1; } mem = &ipa->mem[IPA_MEM_V4_FILTER_HASHED]; diff --git a/drivers/net/ipa/ipa_qmi_msg.c b/drivers/net/ipa/ipa_qmi_msg.c index 73413371e3d3..ecf9f863c842 100644 --- a/drivers/net/ipa/ipa_qmi_msg.c +++ b/drivers/net/ipa/ipa_qmi_msg.c @@ -271,7 +271,7 @@ struct qmi_elem_info ipa_init_modem_driver_req_ei[] = { .tlv_type = 0x12, .offset = offsetof(struct ipa_init_modem_driver_req, v4_route_tbl_info), - .ei_array = ipa_mem_array_ei, + .ei_array = ipa_mem_bounds_ei, }, { .data_type = QMI_OPT_FLAG, @@ -292,7 +292,7 @@ struct qmi_elem_info ipa_init_modem_driver_req_ei[] = { .tlv_type = 0x13, .offset = offsetof(struct ipa_init_modem_driver_req, v6_route_tbl_info), - .ei_array = ipa_mem_array_ei, + .ei_array = ipa_mem_bounds_ei, }, { .data_type = QMI_OPT_FLAG, @@ -456,7 +456,7 @@ struct qmi_elem_info ipa_init_modem_driver_req_ei[] = { .tlv_type = 0x1b, .offset = offsetof(struct ipa_init_modem_driver_req, v4_hash_route_tbl_info), - .ei_array = ipa_mem_array_ei, + .ei_array = ipa_mem_bounds_ei, }, { .data_type = QMI_OPT_FLAG, @@ -477,7 +477,7 @@ struct qmi_elem_info ipa_init_modem_driver_req_ei[] = { .tlv_type = 0x1c, .offset = offsetof(struct ipa_init_modem_driver_req, v6_hash_route_tbl_info), - .ei_array = ipa_mem_array_ei, + .ei_array = ipa_mem_bounds_ei, }, { .data_type = QMI_OPT_FLAG, diff --git a/drivers/net/ipa/ipa_qmi_msg.h b/drivers/net/ipa/ipa_qmi_msg.h index cfac456cea0c..58de425bb8e6 100644 --- a/drivers/net/ipa/ipa_qmi_msg.h +++ b/drivers/net/ipa/ipa_qmi_msg.h @@ -82,9 +82,11 @@ enum ipa_platform_type { IPA_QMI_PLATFORM_TYPE_MSM_QNX_V01 = 5, /* QNX MSM */ }; -/* This defines the start and end offset of a range of memory. Both - * fields are offsets relative to the start of IPA shared memory. - * The end value is the last addressable byte *within* the range. +/* This defines the start and end offset of a range of memory. The start + * value is a byte offset relative to the start of IPA shared memory. The + * end value is the last addressable unit *within* the range. Typically + * the end value is in units of bytes, however it can also be a maximum + * array index value. */ struct ipa_mem_bounds { u32 start; @@ -125,18 +127,19 @@ struct ipa_init_modem_driver_req { u8 hdr_tbl_info_valid; struct ipa_mem_bounds hdr_tbl_info; - /* Routing table information. These define the location and size of - * non-hashable IPv4 and IPv6 filter tables. The start values are - * offsets relative to the start of IPA shared memory. + /* Routing table information. These define the location and maximum + * *index* (not byte) for the modem portion of non-hashable IPv4 and + * IPv6 routing tables. The start values are byte offsets relative + * to the start of IPA shared memory. */ u8 v4_route_tbl_info_valid; - struct ipa_mem_array v4_route_tbl_info; + struct ipa_mem_bounds v4_route_tbl_info; u8 v6_route_tbl_info_valid; - struct ipa_mem_array v6_route_tbl_info; + struct ipa_mem_bounds v6_route_tbl_info; /* Filter table information. These define the location of the * non-hashable IPv4 and IPv6 filter tables. The start values are - * offsets relative to the start of IPA shared memory. + * byte offsets relative to the start of IPA shared memory. */ u8 v4_filter_tbl_start_valid; u32 v4_filter_tbl_start; @@ -177,18 +180,20 @@ struct ipa_init_modem_driver_req { u8 zip_tbl_info_valid; struct ipa_mem_bounds zip_tbl_info; - /* Routing table information. These define the location and size - * of hashable IPv4 and IPv6 filter tables. The start values are - * offsets relative to the start of IPA shared memory. + /* Routing table information. These define the location and maximum + * *index* (not byte) for the modem portion of hashable IPv4 and IPv6 + * routing tables (if supported by hardware). The start values are + * byte offsets relative to the start of IPA shared memory. */ u8 v4_hash_route_tbl_info_valid; - struct ipa_mem_array v4_hash_route_tbl_info; + struct ipa_mem_bounds v4_hash_route_tbl_info; u8 v6_hash_route_tbl_info_valid; - struct ipa_mem_array v6_hash_route_tbl_info; + struct ipa_mem_bounds v6_hash_route_tbl_info; /* Filter table information. These define the location and size - * of hashable IPv4 and IPv6 filter tables. The start values are - * offsets relative to the start of IPA shared memory. + * of hashable IPv4 and IPv6 filter tables (if supported by hardware). + * The start values are byte offsets relative to the start of IPA + * shared memory. */ u8 v4_hash_filter_tbl_start_valid; u32 v4_hash_filter_tbl_start; diff --git a/drivers/net/ipa/ipa_table.c b/drivers/net/ipa/ipa_table.c index bada98d7360c..02c192837414 100644 --- a/drivers/net/ipa/ipa_table.c +++ b/drivers/net/ipa/ipa_table.c @@ -108,8 +108,6 @@ /* Assignment of route table entries to the modem and AP */ #define IPA_ROUTE_MODEM_MIN 0 -#define IPA_ROUTE_MODEM_COUNT 8 - #define IPA_ROUTE_AP_MIN IPA_ROUTE_MODEM_COUNT #define IPA_ROUTE_AP_COUNT \ (IPA_ROUTE_COUNT_MAX - IPA_ROUTE_MODEM_COUNT) diff --git a/drivers/net/ipa/ipa_table.h b/drivers/net/ipa/ipa_table.h index dc9ff21dbdfb..35e519cef25d 100644 --- a/drivers/net/ipa/ipa_table.h +++ b/drivers/net/ipa/ipa_table.h @@ -13,6 +13,9 @@ struct ipa; /* The maximum number of filter table entries (IPv4, IPv6; hashed or not) */ #define IPA_FILTER_COUNT_MAX 14 +/* The number of route table entries allotted to the modem */ +#define IPA_ROUTE_MODEM_COUNT 8 + /* The maximum number of route table entries (IPv4, IPv6; hashed or not) */ #define IPA_ROUTE_COUNT_MAX 15 -- 2.25.1
From: "Jason A. Donenfeld" <Jason@zx2c4.com> stable inclusion from stable-v5.10.146 commit b7b38595989457e06beabccc84438ed843686a82 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 684dec3cf45da2b0848298efae4adf3b2aeafeda ] A previous commit tried to make the ratelimiter timings test more reliable but in the process made it less reliable on other configurations. This is an impossible problem to solve without increasingly ridiculous heuristics. And it's not even a problem that actually needs to be solved in any comprehensive way, since this is only ever used during development. So just cordon this off with a DEBUG_ ifdef, just like we do for the trie's randomized tests, so it can be enabled while hacking on the code, and otherwise disabled in CI. In the process we also revert 151c8e499f47. Fixes: 151c8e499f47 ("wireguard: ratelimiter: use hrtimer in selftest") Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/wireguard/selftest/ratelimiter.c | 25 ++++++++------------ 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireguard/selftest/ratelimiter.c b/drivers/net/wireguard/selftest/ratelimiter.c index ba87d294604f..d4bb40a695ab 100644 --- a/drivers/net/wireguard/selftest/ratelimiter.c +++ b/drivers/net/wireguard/selftest/ratelimiter.c @@ -6,29 +6,28 @@ #ifdef DEBUG #include <linux/jiffies.h> -#include <linux/hrtimer.h> static const struct { bool result; - u64 nsec_to_sleep_before; + unsigned int msec_to_sleep_before; } expected_results[] __initconst = { [0 ... PACKETS_BURSTABLE - 1] = { true, 0 }, [PACKETS_BURSTABLE] = { false, 0 }, - [PACKETS_BURSTABLE + 1] = { true, NSEC_PER_SEC / PACKETS_PER_SECOND }, + [PACKETS_BURSTABLE + 1] = { true, MSEC_PER_SEC / PACKETS_PER_SECOND }, [PACKETS_BURSTABLE + 2] = { false, 0 }, - [PACKETS_BURSTABLE + 3] = { true, (NSEC_PER_SEC / PACKETS_PER_SECOND) * 2 }, + [PACKETS_BURSTABLE + 3] = { true, (MSEC_PER_SEC / PACKETS_PER_SECOND) * 2 }, [PACKETS_BURSTABLE + 4] = { true, 0 }, [PACKETS_BURSTABLE + 5] = { false, 0 } }; static __init unsigned int maximum_jiffies_at_index(int index) { - u64 total_nsecs = 2 * NSEC_PER_SEC / PACKETS_PER_SECOND / 3; + unsigned int total_msecs = 2 * MSEC_PER_SEC / PACKETS_PER_SECOND / 3; int i; for (i = 0; i <= index; ++i) - total_nsecs += expected_results[i].nsec_to_sleep_before; - return nsecs_to_jiffies(total_nsecs); + total_msecs += expected_results[i].msec_to_sleep_before; + return msecs_to_jiffies(total_msecs); } static __init int timings_test(struct sk_buff *skb4, struct iphdr *hdr4, @@ -43,12 +42,8 @@ static __init int timings_test(struct sk_buff *skb4, struct iphdr *hdr4, loop_start_time = jiffies; for (i = 0; i < ARRAY_SIZE(expected_results); ++i) { - if (expected_results[i].nsec_to_sleep_before) { - ktime_t timeout = ktime_add(ktime_add_ns(ktime_get_coarse_boottime(), TICK_NSEC * 4 / 3), - ns_to_ktime(expected_results[i].nsec_to_sleep_before)); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_hrtimeout_range_clock(&timeout, 0, HRTIMER_MODE_ABS, CLOCK_BOOTTIME); - } + if (expected_results[i].msec_to_sleep_before) + msleep(expected_results[i].msec_to_sleep_before); if (time_is_before_jiffies(loop_start_time + maximum_jiffies_at_index(i))) @@ -132,7 +127,7 @@ bool __init wg_ratelimiter_selftest(void) if (IS_ENABLED(CONFIG_KASAN) || IS_ENABLED(CONFIG_UBSAN)) return true; - BUILD_BUG_ON(NSEC_PER_SEC % PACKETS_PER_SECOND != 0); + BUILD_BUG_ON(MSEC_PER_SEC % PACKETS_PER_SECOND != 0); if (wg_ratelimiter_init()) goto out; @@ -172,7 +167,7 @@ bool __init wg_ratelimiter_selftest(void) ++test; #endif - for (trials = TRIALS_BEFORE_GIVING_UP;;) { + for (trials = TRIALS_BEFORE_GIVING_UP; IS_ENABLED(DEBUG_RATELIMITER_TIMINGS);) { int test_count = 0, ret; ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count); -- 2.25.1
From: "Jason A. Donenfeld" <Jason@zx2c4.com> stable inclusion from stable-v5.10.146 commit f0a057f49b8db5d9dd39769fecaae7a466825993 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 26c013108c12b94bc023bf19198a4300596c98b1 ] Doing a variable-sized memcpy is slower, and the compiler isn't smart enough to turn this into a constant-size assignment. Further, Kees' latest fortified memcpy will actually bark, because the destination pointer is type sockaddr, not explicitly sockaddr_in or sockaddr_in6, so it thinks there's an overflow: memcpy: detected field-spanning write (size 28) of single field "&endpoint.addr" at drivers/net/wireguard/netlink.c:446 (size 16) Fix this by just assigning by using explicit casts for each checked case. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reported-by: syzbot+a448cda4dba2dac50de5@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/wireguard/netlink.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireguard/netlink.c b/drivers/net/wireguard/netlink.c index d0f3b6d7f408..5c804bcabfe6 100644 --- a/drivers/net/wireguard/netlink.c +++ b/drivers/net/wireguard/netlink.c @@ -436,14 +436,13 @@ static int set_peer(struct wg_device *wg, struct nlattr **attrs) if (attrs[WGPEER_A_ENDPOINT]) { struct sockaddr *addr = nla_data(attrs[WGPEER_A_ENDPOINT]); size_t len = nla_len(attrs[WGPEER_A_ENDPOINT]); + struct endpoint endpoint = { { { 0 } } }; - if ((len == sizeof(struct sockaddr_in) && - addr->sa_family == AF_INET) || - (len == sizeof(struct sockaddr_in6) && - addr->sa_family == AF_INET6)) { - struct endpoint endpoint = { { { 0 } } }; - - memcpy(&endpoint.addr, addr, len); + if (len == sizeof(struct sockaddr_in) && addr->sa_family == AF_INET) { + endpoint.addr4 = *(struct sockaddr_in *)addr; + wg_socket_set_peer_endpoint(peer, &endpoint); + } else if (len == sizeof(struct sockaddr_in6) && addr->sa_family == AF_INET6) { + endpoint.addr6 = *(struct sockaddr_in6 *)addr; wg_socket_set_peer_endpoint(peer, &endpoint); } } -- 2.25.1
From: Vladimir Oltean <vladimir.oltean@nxp.com> stable inclusion from stable-v5.10.146 commit 8bd98cfbfcb031d1005ce9cc13a289908c045ef0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit fed38e64d9b99d65a36c0dbadc3d3f8ddd9ea030 ] The VF netdev driver shouldn't respond to changes in the NETIF_F_HW_TC flag; only PFs should. Moreover, TSN-specific code should go to enetc_qos.c, which should not be included in the VF driver. Fixes: 79e499829f3f ("net: enetc: add hw tc hw offload features for PSPF capability") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220916133209.3351399-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/freescale/enetc/enetc.c | 32 +------------------ drivers/net/ethernet/freescale/enetc/enetc.h | 9 ++++-- .../net/ethernet/freescale/enetc/enetc_pf.c | 11 ++++++- .../net/ethernet/freescale/enetc/enetc_qos.c | 23 +++++++++++++ .../net/ethernet/freescale/enetc/enetc_vf.c | 4 ++- 5 files changed, 44 insertions(+), 35 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 15aa3b3c0089..4af253825957 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -1671,29 +1671,6 @@ static int enetc_set_rss(struct net_device *ndev, int en) return 0; } -static int enetc_set_psfp(struct net_device *ndev, int en) -{ - struct enetc_ndev_priv *priv = netdev_priv(ndev); - int err; - - if (en) { - err = enetc_psfp_enable(priv); - if (err) - return err; - - priv->active_offloads |= ENETC_F_QCI; - return 0; - } - - err = enetc_psfp_disable(priv); - if (err) - return err; - - priv->active_offloads &= ~ENETC_F_QCI; - - return 0; -} - static void enetc_enable_rxvlan(struct net_device *ndev, bool en) { struct enetc_ndev_priv *priv = netdev_priv(ndev); @@ -1712,11 +1689,9 @@ static void enetc_enable_txvlan(struct net_device *ndev, bool en) enetc_bdr_enable_txvlan(&priv->si->hw, i, en); } -int enetc_set_features(struct net_device *ndev, - netdev_features_t features) +void enetc_set_features(struct net_device *ndev, netdev_features_t features) { netdev_features_t changed = ndev->features ^ features; - int err = 0; if (changed & NETIF_F_RXHASH) enetc_set_rss(ndev, !!(features & NETIF_F_RXHASH)); @@ -1728,11 +1703,6 @@ int enetc_set_features(struct net_device *ndev, if (changed & NETIF_F_HW_VLAN_CTAG_TX) enetc_enable_txvlan(ndev, !!(features & NETIF_F_HW_VLAN_CTAG_TX)); - - if (changed & NETIF_F_HW_TC) - err = enetc_set_psfp(ndev, !!(features & NETIF_F_HW_TC)); - - return err; } #ifdef CONFIG_FSL_ENETC_PTP_CLOCK diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h index 15d19cbd5a95..00386c5d3cde 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.h +++ b/drivers/net/ethernet/freescale/enetc/enetc.h @@ -301,8 +301,7 @@ void enetc_start(struct net_device *ndev); void enetc_stop(struct net_device *ndev); netdev_tx_t enetc_xmit(struct sk_buff *skb, struct net_device *ndev); struct net_device_stats *enetc_get_stats(struct net_device *ndev); -int enetc_set_features(struct net_device *ndev, - netdev_features_t features); +void enetc_set_features(struct net_device *ndev, netdev_features_t features); int enetc_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd); int enetc_setup_tc(struct net_device *ndev, enum tc_setup_type type, void *type_data); @@ -335,6 +334,7 @@ int enetc_setup_tc_block_cb(enum tc_setup_type type, void *type_data, int enetc_setup_tc_psfp(struct net_device *ndev, void *type_data); int enetc_psfp_init(struct enetc_ndev_priv *priv); int enetc_psfp_clean(struct enetc_ndev_priv *priv); +int enetc_set_psfp(struct net_device *ndev, bool en); static inline void enetc_get_max_cap(struct enetc_ndev_priv *priv) { @@ -410,4 +410,9 @@ static inline int enetc_psfp_disable(struct enetc_ndev_priv *priv) { return 0; } + +static inline int enetc_set_psfp(struct net_device *ndev, bool en) +{ + return 0; +} #endif diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 716b396bf094..6904e10dd46b 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -671,6 +671,13 @@ static int enetc_pf_set_features(struct net_device *ndev, { netdev_features_t changed = ndev->features ^ features; struct enetc_ndev_priv *priv = netdev_priv(ndev); + int err; + + if (changed & NETIF_F_HW_TC) { + err = enetc_set_psfp(ndev, !!(features & NETIF_F_HW_TC)); + if (err) + return err; + } if (changed & NETIF_F_HW_VLAN_CTAG_FILTER) { struct enetc_pf *pf = enetc_si_priv(priv->si); @@ -684,7 +691,9 @@ static int enetc_pf_set_features(struct net_device *ndev, if (changed & NETIF_F_LOOPBACK) enetc_set_loopback(ndev, !!(features & NETIF_F_LOOPBACK)); - return enetc_set_features(ndev, features); + enetc_set_features(ndev, features); + + return 0; } static const struct net_device_ops enetc_ndev_ops = { diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c index 9e6988fd3787..62efe1aebf86 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c @@ -1525,6 +1525,29 @@ int enetc_setup_tc_block_cb(enum tc_setup_type type, void *type_data, } } +int enetc_set_psfp(struct net_device *ndev, bool en) +{ + struct enetc_ndev_priv *priv = netdev_priv(ndev); + int err; + + if (en) { + err = enetc_psfp_enable(priv); + if (err) + return err; + + priv->active_offloads |= ENETC_F_QCI; + return 0; + } + + err = enetc_psfp_disable(priv); + if (err) + return err; + + priv->active_offloads &= ~ENETC_F_QCI; + + return 0; +} + int enetc_psfp_init(struct enetc_ndev_priv *priv) { if (epsfp.psfp_sfi_bitmap) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_vf.c b/drivers/net/ethernet/freescale/enetc/enetc_vf.c index 33c125735db7..5ce3e2593bdd 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_vf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_vf.c @@ -88,7 +88,9 @@ static int enetc_vf_set_mac_addr(struct net_device *ndev, void *addr) static int enetc_vf_set_features(struct net_device *ndev, netdev_features_t features) { - return enetc_set_features(ndev, features); + enetc_set_features(ndev, features); + + return 0; } /* Probing/ Init */ -- 2.25.1
From: Arnd Bergmann <arnd@arndb.de> stable inclusion from stable-v5.10.146 commit aa400ccadf5961154bc62d15b474eed8818d60bd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit b0e99d03778b2418aec20db99d97d19d25d198b6 ] Since dynamic registration of the gifconf() helper is only used for IPv4, and this can not be in a loadable module, this can be simplified noticeably by turning it into a direct function call as a preparation for cleaning up the compat handling. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 5641c751fe2f ("net: enetc: deny offload of tc-based TSN features on VF interfaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- include/linux/inetdevice.h | 9 ++++++++ include/linux/netdevice.h | 8 ------- net/core/dev_ioctl.c | 44 +++++++++----------------------------- net/ipv4/devinet.c | 4 +--- 4 files changed, 20 insertions(+), 45 deletions(-) diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index a44812b24687..288af7e8e289 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -182,6 +182,15 @@ static inline struct net_device *ip_dev_find(struct net *net, __be32 addr) int inet_addr_onlink(struct in_device *in_dev, __be32 a, __be32 b); int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *); +#ifdef CONFIG_INET +int inet_gifconf(struct net_device *dev, char __user *buf, int len, int size); +#else +static inline int inet_gifconf(struct net_device *dev, char __user *buf, + int len, int size) +{ + return 0; +} +#endif void devinet_init(void); struct in_device *inetdev_by_index(struct net *, int); __be32 inet_select_addr(const struct net_device *dev, __be32 dst, int scope); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 42b44b1ba116..d2d8bf9493d6 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3254,14 +3254,6 @@ static inline bool dev_has_header(const struct net_device *dev) return dev->header_ops && dev->header_ops->create; } -typedef int gifconf_func_t(struct net_device * dev, char __user * bufptr, - int len, int size); -int register_gifconf(unsigned int family, gifconf_func_t *gifconf); -static inline int unregister_gifconf(unsigned int family) -{ - return register_gifconf(family, NULL); -} - #ifdef CONFIG_NET_FLOW_LIMIT #define FLOW_LIMIT_HISTORY (1 << 7) /* must be ^2 and !overflow buckets */ struct sd_flow_limit { diff --git a/net/core/dev_ioctl.c b/net/core/dev_ioctl.c index 54fb18b4f55e..993420da2930 100644 --- a/net/core/dev_ioctl.c +++ b/net/core/dev_ioctl.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/kmod.h> #include <linux/netdevice.h> +#include <linux/inetdevice.h> #include <linux/etherdevice.h> #include <linux/rtnetlink.h> #include <linux/net_tstamp.h> @@ -25,26 +26,6 @@ static int dev_ifname(struct net *net, struct ifreq *ifr) return netdev_get_name(net, ifr->ifr_name, ifr->ifr_ifindex); } -static gifconf_func_t *gifconf_list[NPROTO]; - -/** - * register_gifconf - register a SIOCGIF handler - * @family: Address family - * @gifconf: Function handler - * - * Register protocol dependent address dumping routines. The handler - * that is passed must not be freed or reused until it has been replaced - * by another handler. - */ -int register_gifconf(unsigned int family, gifconf_func_t *gifconf) -{ - if (family >= NPROTO) - return -EINVAL; - gifconf_list[family] = gifconf; - return 0; -} -EXPORT_SYMBOL(register_gifconf); - /* * Perform a SIOCGIFCONF call. This structure will change * size eventually, and there is nothing I can do about it. @@ -57,7 +38,6 @@ int dev_ifconf(struct net *net, struct ifconf *ifc, int size) char __user *pos; int len; int total; - int i; /* * Fetch the caller's info block. @@ -72,19 +52,15 @@ int dev_ifconf(struct net *net, struct ifconf *ifc, int size) total = 0; for_each_netdev(net, dev) { - for (i = 0; i < NPROTO; i++) { - if (gifconf_list[i]) { - int done; - if (!pos) - done = gifconf_list[i](dev, NULL, 0, size); - else - done = gifconf_list[i](dev, pos + total, - len - total, size); - if (done < 0) - return -EFAULT; - total += done; - } - } + int done; + if (!pos) + done = inet_gifconf(dev, NULL, 0, size); + else + done = inet_gifconf(dev, pos + total, + len - total, size); + if (done < 0) + return -EFAULT; + total += done; } /* diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 8f1753875550..88b6120878cd 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1244,7 +1244,7 @@ int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr) return ret; } -static int inet_gifconf(struct net_device *dev, char __user *buf, int len, int size) +int inet_gifconf(struct net_device *dev, char __user *buf, int len, int size) { struct in_device *in_dev = __in_dev_get_rtnl(dev); const struct in_ifaddr *ifa; @@ -2766,8 +2766,6 @@ void __init devinet_init(void) INIT_HLIST_HEAD(&inet_addr_lst[i]); register_pernet_subsys(&devinet_ops); - - register_gifconf(PF_INET, inet_gifconf); register_netdevice_notifier(&ip_netdev_notifier); queue_delayed_work(system_power_efficient_wq, &check_lifetime_work, 0); -- 2.25.1
From: Vladimir Oltean <vladimir.oltean@nxp.com> stable inclusion from stable-v5.10.146 commit 586def6ebed195f3594a4884f7c5334d0e1ad1bb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit db46e3a88a09c5cf7e505664d01da7238cd56c92 ] In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on an invalid set of flags. As a result, it is possible to crash the kernel if user space forces an error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling of taprio_enable_offload(). This is because drivers do not expect the offload to be disabled when it was never enabled. The error that we force here is to attach taprio as a non-root qdisc, but instead as child of an mqprio root qdisc: $ tc qdisc add dev swp0 root handle 1: \ mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:1 \ taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Unable to handle kernel paging request at virtual address fffffffffffffff8 [fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Call trace: taprio_dump+0x27c/0x310 vsc9959_port_setup_tc+0x1f4/0x460 felix_port_setup_tc+0x24/0x3c dsa_slave_setup_tc+0x54/0x27c taprio_disable_offload.isra.0+0x58/0xe0 taprio_destroy+0x80/0x104 qdisc_create+0x240/0x470 tc_modify_qdisc+0x1fc/0x6b0 rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c Fix this by keeping track of the operations we made, and undo the offload only if we actually did it. I've added "bool offloaded" inside a 4 byte hole between "int clockid" and "atomic64_t picos_per_byte". Now the first cache line looks like below: $ pahole -C taprio_sched net/sched/sch_taprio.o struct taprio_sched { struct Qdisc * * qdiscs; /* 0 8 */ struct Qdisc * root; /* 8 8 */ u32 flags; /* 16 4 */ enum tk_offsets tk_offset; /* 20 4 */ int clockid; /* 24 4 */ bool offloaded; /* 28 1 */ /* XXX 3 bytes hole, try to pack */ atomic64_t picos_per_byte; /* 32 0 */ /* XXX 8 bytes hole, try to pack */ spinlock_t current_entry_lock; /* 40 0 */ /* XXX 8 bytes hole, try to pack */ struct sched_entry * current_entry; /* 48 8 */ struct sched_gate_list * oper_sched; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/sched/sch_taprio.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c index eca525791013..384316c11e98 100644 --- a/net/sched/sch_taprio.c +++ b/net/sched/sch_taprio.c @@ -65,6 +65,7 @@ struct taprio_sched { u32 flags; enum tk_offsets tk_offset; int clockid; + bool offloaded; atomic64_t picos_per_byte; /* Using picoseconds because for 10Gbps+ * speeds it's sub-nanoseconds per byte */ @@ -1267,6 +1268,8 @@ static int taprio_enable_offload(struct net_device *dev, goto done; } + q->offloaded = true; + done: taprio_offload_free(offload); @@ -1281,12 +1284,9 @@ static int taprio_disable_offload(struct net_device *dev, struct tc_taprio_qopt_offload *offload; int err; - if (!FULL_OFFLOAD_IS_ENABLED(q->flags)) + if (!q->offloaded) return 0; - if (!ops->ndo_setup_tc) - return -EOPNOTSUPP; - offload = taprio_offload_alloc(0); if (!offload) { NL_SET_ERR_MSG(extack, @@ -1302,6 +1302,8 @@ static int taprio_disable_offload(struct net_device *dev, goto out; } + q->offloaded = false; + out: taprio_offload_free(offload); -- 2.25.1
From: Vladimir Oltean <vladimir.oltean@nxp.com> stable inclusion from stable-v5.10.146 commit 1e7e55374d01d124ea5c8843bd2c4aa08b139220 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1461d212ab277d8bba1a753d33e9afe03d81f9d4 ] taprio can only operate as root qdisc, and to that end, there exists the following check in taprio_init(), just as in mqprio: if (sch->parent != TC_H_ROOT) return -EOPNOTSUPP; And indeed, when we try to attach taprio to an mqprio child, it fails as expected: $ tc qdisc add dev swp0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:2 taprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Error: sch_taprio: Can only be attached as root qdisc. (extack message added by me) But when we try to attach a taprio child to a taprio root qdisc, surprisingly it doesn't fail: $ tc qdisc replace dev swp0 root handle 1: taprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI $ tc qdisc replace dev swp0 parent 1:2 taprio num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI This is because tc_modify_qdisc() behaves differently when mqprio is root, vs when taprio is root. In the mqprio case, it finds the parent qdisc through p = qdisc_lookup(dev, TC_H_MAJ(clid)), and then the child qdisc through q = qdisc_leaf(p, clid). This leaf qdisc q has handle 0, so it is ignored according to the comment right below ("It may be default qdisc, ignore it"). As a result, tc_modify_qdisc() goes through the qdisc_create() code path, and this gives taprio_init() a chance to check for sch_parent != TC_H_ROOT and error out. Whereas in the taprio case, the returned q = qdisc_leaf(p, clid) is different. It is not the default qdisc created for each netdev queue (both taprio and mqprio call qdisc_create_dflt() and keep them in a private q->qdiscs[], or priv->qdiscs[], respectively). Instead, taprio makes qdisc_leaf() return the _root_ qdisc, aka itself. When taprio does that, tc_modify_qdisc() goes through the qdisc_change() code path, because the qdisc layer never finds out about the child qdisc of the root. And through the ->change() ops, taprio has no reason to check whether its parent is root or not, just through ->init(), which is not called. The problem is the taprio_leaf() implementation. Even though code wise, it does the exact same thing as mqprio_leaf() which it is copied from, it works with different input data. This is because mqprio does not attach itself (the root) to each device TX queue, but one of the default qdiscs from its private array. In fact, since commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), taprio does this too, but just for the full offload case. So if we tried to attach a taprio child to a fully offloaded taprio root qdisc, it would properly fail too; just not to a software root taprio. To fix the problem, stop looking at the Qdisc that's attached to the TX queue, and instead, always return the default qdiscs that we've allocated (and to which we privately enqueue and dequeue, in software scheduling mode). Since Qdisc_class_ops :: leaf is only called from tc_modify_qdisc(), the risk of unforeseen side effects introduced by this change is minimal. Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/sched/sch_taprio.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c index 384316c11e98..ab8835a72cee 100644 --- a/net/sched/sch_taprio.c +++ b/net/sched/sch_taprio.c @@ -1906,12 +1906,14 @@ static int taprio_dump(struct Qdisc *sch, struct sk_buff *skb) static struct Qdisc *taprio_leaf(struct Qdisc *sch, unsigned long cl) { - struct netdev_queue *dev_queue = taprio_queue_get(sch, cl); + struct taprio_sched *q = qdisc_priv(sch); + struct net_device *dev = qdisc_dev(sch); + unsigned int ntx = cl - 1; - if (!dev_queue) + if (ntx >= dev->num_tx_queues) return NULL; - return dev_queue->qdisc_sleeping; + return q->qdiscs[ntx]; } static unsigned long taprio_find(struct Qdisc *sch, u32 classid) -- 2.25.1
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> stable inclusion from stable-v5.10.146 commit 710e3f526bd23a0d33435dedc52c3144de284378 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 921ebde3c0d22c8cba74ce8eb3cc4626abff1ccd ] syzbot is reporting underflow of nft_counters_enabled counter at nf_tables_addchain() [1], for commit 43eb8949cfdffa76 ("netfilter: nf_tables: do not leave chain stats enabled on error") missed that nf_tables_chain_destroy() after nft_basechain_init() in the error path of nf_tables_addchain() decrements the counter because nft_basechain_init() makes nft_is_base_chain() return true by setting NFT_CHAIN_BASE flag. Increment the counter immediately after returning from nft_basechain_init(). Link: https://syzkaller.appspot.com/bug?extid=b5d82a651b71cd8a75ab [1] Reported-by: syzbot <syzbot+b5d82a651b71cd8a75ab@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+b5d82a651b71cd8a75ab@syzkaller.appspotmail.com> Fixes: 43eb8949cfdffa76 ("netfilter: nf_tables: do not leave chain stats enabled on error") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/netfilter/nf_tables_api.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index b8e7e1c5c08a..d65c47bcbfc9 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2001,7 +2001,6 @@ static int nf_tables_addchain(struct nft_ctx *ctx, u8 family, u8 genmask, u8 policy, u32 flags) { const struct nlattr * const *nla = ctx->nla; - struct nft_stats __percpu *stats = NULL; struct nft_table *table = ctx->table; struct nft_base_chain *basechain; struct net *net = ctx->net; @@ -2015,6 +2014,7 @@ static int nf_tables_addchain(struct nft_ctx *ctx, u8 family, u8 genmask, return -EOVERFLOW; if (nla[NFTA_CHAIN_HOOK]) { + struct nft_stats __percpu *stats = NULL; struct nft_chain_hook hook; if (flags & NFT_CHAIN_BINDING) @@ -2047,6 +2047,8 @@ static int nf_tables_addchain(struct nft_ctx *ctx, u8 family, u8 genmask, kfree(basechain); return err; } + if (stats) + static_branch_inc(&nft_counters_enabled); } else { if (flags & NFT_CHAIN_BASE) return -EINVAL; @@ -2121,9 +2123,6 @@ static int nf_tables_addchain(struct nft_ctx *ctx, u8 family, u8 genmask, goto err_unregister_hook; } - if (stats) - static_branch_inc(&nft_counters_enabled); - table->use++; return 0; -- 2.25.1
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> stable inclusion from stable-v5.10.146 commit b043a525a3f5520abb676a7cd8f6328fdf959e88 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 9a4d6dd554b86e65581ef6b6638a39ae079b17ac ] It seems to me that percpu memory for chain stats started leaking since commit 3bc158f8d0330f0a ("netfilter: nf_tables: map basechain priority to hardware priority") when nft_chain_offload_priority() returned an error. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 3bc158f8d0330f0a ("netfilter: nf_tables: map basechain priority to hardware priority") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/netfilter/nf_tables_api.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index d65c47bcbfc9..810995d712ac 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2045,6 +2045,7 @@ static int nf_tables_addchain(struct nft_ctx *ctx, u8 family, u8 genmask, if (err < 0) { nft_chain_release_hook(&hook); kfree(basechain); + free_percpu(stats); return err; } if (stats) -- 2.25.1
From: Florian Westphal <fw@strlen.de> stable inclusion from stable-v5.10.146 commit ebd97dbe3c55d68346b9c5fb00634a7f5b10bbee category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 62ce44c4fff947eebdf10bb582267e686e6835c9 ] The bug fix was incomplete, it "replaced" crash with a memory leak. The old code had an assignment to "ret" embedded into the conditional, restore this. Fixes: 7997eff82828 ("netfilter: ebtables: reject blobs that don't provide all entry points") Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/bridge/netfilter/ebtables.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 310740cc684a..06b80b584381 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -999,8 +999,10 @@ static int do_replace_finish(struct net *net, struct ebt_replace *repl, goto free_iterate; } - if (repl->valid_hooks != t->valid_hooks) + if (repl->valid_hooks != t->valid_hooks) { + ret = -EINVAL; goto free_unlock; + } if (repl->num_counters && repl->num_counters != t->private->nentries) { ret = -EINVAL; -- 2.25.1
From: Marc Kleine-Budde <mkl@pengutronix.de> stable inclusion from stable-v5.10.146 commit 78926cf7629126876b145fdb7b1a6d8d714369d8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 5440428b3da65408dba0241985acb7a05258b85e ] The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device has been started. On busy networks the CAN controller might receive CAN frame between and go into an error state before the dev->can.state is assigned. Assign dev->can.state before starting the controller to close the race window. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/can/usb/gs_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index 1bfc497da9ac..a879200eaab0 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -678,6 +678,7 @@ static int gs_can_open(struct net_device *netdev) flags |= GS_CAN_MODE_TRIPLE_SAMPLE; /* finally start device */ + dev->can.state = CAN_STATE_ERROR_ACTIVE; dm->mode = cpu_to_le32(GS_CAN_MODE_START); dm->flags = cpu_to_le32(flags); rc = usb_control_msg(interface_to_usbdev(dev->iface), @@ -694,13 +695,12 @@ static int gs_can_open(struct net_device *netdev) if (rc < 0) { netdev_err(netdev, "Couldn't start device (err=%d)\n", rc); kfree(dm); + dev->can.state = CAN_STATE_STOPPED; return rc; } kfree(dm); - dev->can.state = CAN_STATE_ERROR_ACTIVE; - parent->active_channels++; if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)) netif_start_queue(netdev); -- 2.25.1
From: Lieven Hey <lieven.hey@kdab.com> stable inclusion from stable-v5.10.146 commit 28d185095e51777b71887491a87a7ea3458abbfe category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit babd04386b1df8c364cdaa39ac0e54349502e1e5 ] The missing header makes it hard for programs like elfutils to open these files. Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols") Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Lieven Hey <lieven.hey@kdab.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Link: https://lore.kernel.org/r/20220915092910.711036-1-lieven.hey@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- tools/perf/util/genelf.c | 14 ++++++++++++++ tools/perf/util/genelf.h | 4 ++++ 2 files changed, 18 insertions(+) diff --git a/tools/perf/util/genelf.c b/tools/perf/util/genelf.c index 953338b9e887..02cd9f75e3d2 100644 --- a/tools/perf/util/genelf.c +++ b/tools/perf/util/genelf.c @@ -251,6 +251,7 @@ jit_write_elf(int fd, uint64_t load_addr, const char *sym, Elf_Data *d; Elf_Scn *scn; Elf_Ehdr *ehdr; + Elf_Phdr *phdr; Elf_Shdr *shdr; uint64_t eh_frame_base_offset; char *strsym = NULL; @@ -285,6 +286,19 @@ jit_write_elf(int fd, uint64_t load_addr, const char *sym, ehdr->e_version = EV_CURRENT; ehdr->e_shstrndx= unwinding ? 4 : 2; /* shdr index for section name */ + /* + * setup program header + */ + phdr = elf_newphdr(e, 1); + phdr[0].p_type = PT_LOAD; + phdr[0].p_offset = 0; + phdr[0].p_vaddr = 0; + phdr[0].p_paddr = 0; + phdr[0].p_filesz = csize; + phdr[0].p_memsz = csize; + phdr[0].p_flags = PF_X | PF_R; + phdr[0].p_align = 8; + /* * setup text section */ diff --git a/tools/perf/util/genelf.h b/tools/perf/util/genelf.h index d4137559be05..ac638945b4cb 100644 --- a/tools/perf/util/genelf.h +++ b/tools/perf/util/genelf.h @@ -50,8 +50,10 @@ int jit_add_debug_info(Elf *e, uint64_t code_addr, void *debug, int nr_debug_ent #if GEN_ELF_CLASS == ELFCLASS64 #define elf_newehdr elf64_newehdr +#define elf_newphdr elf64_newphdr #define elf_getshdr elf64_getshdr #define Elf_Ehdr Elf64_Ehdr +#define Elf_Phdr Elf64_Phdr #define Elf_Shdr Elf64_Shdr #define Elf_Sym Elf64_Sym #define ELF_ST_TYPE(a) ELF64_ST_TYPE(a) @@ -59,8 +61,10 @@ int jit_add_debug_info(Elf *e, uint64_t code_addr, void *debug, int nr_debug_ent #define ELF_ST_VIS(a) ELF64_ST_VISIBILITY(a) #else #define elf_newehdr elf32_newehdr +#define elf_newphdr elf32_newphdr #define elf_getshdr elf32_getshdr #define Elf_Ehdr Elf32_Ehdr +#define Elf_Phdr Elf32_Phdr #define Elf_Shdr Elf32_Shdr #define Elf_Sym Elf32_Sym #define ELF_ST_TYPE(a) ELF32_ST_TYPE(a) -- 2.25.1
From: Adrian Hunter <adrian.hunter@intel.com> stable inclusion from stable-v5.10.146 commit c9906216068842693f44aa55b8721a1b84c5fa82 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 5b427df27b94aec1312cace48a746782a0925c53 ] /proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy. However /proc/modules also might change due to reference counts changing even though that does not make any difference. Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway. Remove the comparison checking that /proc/modules is unchanged. Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache") Reported-by: Daniel Dao <dqminh@cloudflare.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Daniel Dao <dqminh@cloudflare.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- tools/perf/util/symbol-elf.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index d8d79a9ec775..3e423a920015 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -2002,8 +2002,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir, * unusual. One significant peculiarity is that the mapping (start -> pgoff) * is not the same for the kernel map and the modules map. That happens because * the data is copied adjacently whereas the original kcore has gaps. Finally, - * kallsyms and modules files are compared with their copies to check that - * modules have not been loaded or unloaded while the copies were taking place. + * kallsyms file is compared with its copy to check that modules have not been + * loaded or unloaded while the copies were taking place. * * Return: %0 on success, %-1 on failure. */ @@ -2066,9 +2066,6 @@ int kcore_copy(const char *from_dir, const char *to_dir) goto out_extract_close; } - if (kcore_copy__compare_file(from_dir, to_dir, "modules")) - goto out_extract_close; - if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms")) goto out_extract_close; -- 2.25.1
From: Nícolas F. R. A. Prado <nfraprado@collabora.com> stable inclusion from stable-v5.10.146 commit fd938b4ce0fb6a41e88711e87268dfafb2e6b18a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 90144dd8b0d137d9e78ef34b3c418e51a49299ad ] As the comment right before the mtk_dsi_stop() call advises, mtk_dsi_stop() should only be called after mtk_drm_crtc_atomic_disable(). That's because that function calls drm_crtc_wait_one_vblank(), which requires the vblank irq to be enabled. Previously mtk_dsi_stop(), being in mtk_dsi_poweroff() and guarded by a refcount, would only be called at the end of mtk_drm_crtc_atomic_disable(), through the call to mtk_crtc_ddp_hw_fini(). Commit cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs") moved the mtk_dsi_stop() call to mtk_output_dsi_disable(), causing it to be called before mtk_drm_crtc_atomic_disable(), and consequently generating vblank timeout warnings during suspend. Move the mtk_dsi_stop() call back to mtk_dsi_poweroff() so that we have a working vblank irq during mtk_drm_crtc_atomic_disable() and stop getting vblank timeout warnings. Fixes: cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Link: http://lists.infradead.org/pipermail/linux-mediatek/2022-August/046713.html Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/mediatek/mtk_dsi.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index b8c1a3c1c517..146c4d04f572 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -668,6 +668,16 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi) if (--dsi->refcount != 0) return; + /* + * mtk_dsi_stop() and mtk_dsi_start() is asymmetric, since + * mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), + * which needs irq for vblank, and mtk_dsi_stop() will disable irq. + * mtk_dsi_start() needs to be called in mtk_output_dsi_enable(), + * after dsi is fully set. + */ + mtk_dsi_stop(dsi); + + mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500); mtk_dsi_reset_engine(dsi); mtk_dsi_lane0_ulp_mode_enter(dsi); mtk_dsi_clk_ulp_mode_enter(dsi); @@ -718,17 +728,6 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi) if (!dsi->enabled) return; - /* - * mtk_dsi_stop() and mtk_dsi_start() is asymmetric, since - * mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), - * which needs irq for vblank, and mtk_dsi_stop() will disable irq. - * mtk_dsi_start() needs to be called in mtk_output_dsi_enable(), - * after dsi is fully set. - */ - mtk_dsi_stop(dsi); - - mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500); - dsi->enabled = false; } -- 2.25.1
From: Wen Gu <guwen@linux.alibaba.com> stable inclusion from stable-v5.10.146 commit d76151a8131e75e49ab65bc4ffa67dddc2ff6b3e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e738455b2c6dcdab03e45d97de36476f93f557d2 ] There might be a potential race between SMC-R buffer map and link group termination. smc_smcr_terminate_all() | smc_connect_rdma() -------------------------------------------------------------- | smc_conn_create() for links in smcibdev | schedule links down | | smc_buf_create() | \- smcr_buf_map_usable_links() | \- no usable links found, | (rmb->mr = NULL) | | smc_clc_send_confirm() | \- access conn->rmb_desc->mr[]->rkey | (panic) During reboot and IB device module remove, all links will be set down and no usable links remain in link groups. In such situation smcr_buf_map_usable_links() should return an error and stop the CLC flow accessing to uninitialized mr. Fixes: b9247544c1bc ("net/smc: convert static link ID instances to support multiple links") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alib... Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/smc/smc_core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c index ef2fd28999ba..bf485a2017a4 100644 --- a/net/smc/smc_core.c +++ b/net/smc/smc_core.c @@ -1584,7 +1584,7 @@ static struct smc_buf_desc *smcr_new_buf_create(struct smc_link_group *lgr, static int smcr_buf_map_usable_links(struct smc_link_group *lgr, struct smc_buf_desc *buf_desc, bool is_rmb) { - int i, rc = 0; + int i, rc = 0, cnt = 0; /* protect against parallel link reconfiguration */ mutex_lock(&lgr->llc_conf_mutex); @@ -1597,9 +1597,12 @@ static int smcr_buf_map_usable_links(struct smc_link_group *lgr, rc = -ENOMEM; goto out; } + cnt++; } out: mutex_unlock(&lgr->llc_conf_mutex); + if (!rc && !cnt) + rc = -EINVAL; return rc; } -- 2.25.1
From: Sean Anderson <seanga2@gmail.com> stable inclusion from stable-v5.10.146 commit 75ca7f44dab65b50c14e4838fc955fbcb6b87122 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 878e2405710aacfeeb19364c300f38b7a9abfe8f ] There is a separate receive path for small packets (under 256 bytes). Instead of allocating a new dma-capable skb to be used for the next packet, this path allocates a skb and copies the data into it (reusing the existing sbk for the next packet). There are two bytes of junk data at the beginning of every packet. I believe these are inserted in order to allow aligned DMA and IP headers. We skip over them using skb_reserve. Before copying over the data, we must use a barrier to ensure we see the whole packet. The current code only synchronizes len bytes, starting from the beginning of the packet, including the junk bytes. However, this leaves off the final two bytes in the packet. Synchronize the whole packet. To reproduce this problem, ping a HME with a payload size between 17 and 214 $ ping -s 17 <hme_address> which will complain rather loudly about the data mismatch. Small packets (below 60 bytes on the wire) do not have this issue. I suspect this is related to the padding added to increase the minimum packet size. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/sun/sunhme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index 69fc47089e62..940db4ec5714 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -2063,9 +2063,9 @@ static void happy_meal_rx(struct happy_meal *hp, struct net_device *dev) skb_reserve(copy_skb, 2); skb_put(copy_skb, len); - dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE); + dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE); skb_copy_from_linear_data(skb, copy_skb->data, len); - dma_sync_single_for_device(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE); + dma_sync_single_for_device(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE); /* Reuse original ring buffer. */ hme_write_rxd(hp, this, (RXFLAG_OWN|((RX_BUF_ALLOC_SIZE-RX_OFFSET)<<16)), -- 2.25.1
From: Hangyu Hua <hbh25y@gmail.com> stable inclusion from stable-v5.10.146 commit 8844c750eeb03452e2b3319c27a526f447b82596 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c2e1cfefcac35e0eea229e148c8284088ce437b5 ] tfilter_put need to be called to put the refount got by tp->ops->get to avoid possible refcount leak when chain->tmplt_ops != NULL and chain->tmplt_ops != tp->ops. Fixes: 7d5509fa0d3d ("net: sched: extend proto ops with 'put' callback") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Link: https://lore.kernel.org/r/20220921092734.31700-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/sched/cls_api.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index b8ffb7e4f696..c410a736301b 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -2124,6 +2124,7 @@ static int tc_new_tfilter(struct sk_buff *skb, struct nlmsghdr *n, } if (chain->tmplt_ops && chain->tmplt_ops != tp->ops) { + tfilter_put(tp, fh); NL_SET_ERR_MSG(extack, "Chain template is set to a different filter kind"); err = -EINVAL; goto errout; -- 2.25.1
From: Hangbin Liu <liuhangbin@gmail.com> stable inclusion from stable-v5.10.146 commit 4bc4b6419e652905f71b12c70783954513d9d7f4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 83e4b196838d90799a8879e5054a3beecf9ed256 ] RHEL/Fedora RPM build checks are stricter, and complain when executable files don't have a shebang line, e.g. *** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit Fix it by adding shebang line. Fixes: 6cf0291f9517 ("selftests: forwarding: Add a RED test for SW datapath") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20220922024453.437757-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- tools/testing/selftests/net/forwarding/sch_red.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/forwarding/sch_red.sh b/tools/testing/selftests/net/forwarding/sch_red.sh index e714bae473fb..81f31179ac88 100755 --- a/tools/testing/selftests/net/forwarding/sch_red.sh +++ b/tools/testing/selftests/net/forwarding/sch_red.sh @@ -1,3 +1,4 @@ +#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # This test sends one stream of traffic from H1 through a TBF shaper, to a RED -- 2.25.1
From: Jingwen Chen <Jingwen.Chen2@amd.com> stable inclusion from stable-v5.10.146 commit fda04a0bab7fdc3ac17508f00584580f858ade76 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 9a458402fb69bda886aa6cbe067311b6e3d9c52a upstream. [Why] This fixes 892deb48269c ("drm/amdgpu: Separate vf2pf work item init from virt data exchange"). we should read pf2vf data based at mman.fw_vram_usage_va after gmc sw_init. commit 892deb48269c breaks this logic. [How] calling amdgpu_virt_exchange_data in amdgpu_virt_init_data_exchange to set the right base in the right sequence. v2: call amdgpu_virt_init_data_exchange after gmc sw_init to make data exchange workqueue run v3: clean up the code logic v4: add some comment and make the code more readable Fixes: 892deb48269c ("drm/amdgpu: Separate vf2pf work item init from virt data exchange") Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: Horace Chen <horace.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c | 20 +++++++------------- 2 files changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index f44ab44abd64..881045e600af 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2224,7 +2224,7 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev) } if (amdgpu_sriov_vf(adev)) - amdgpu_virt_exchange_data(adev); + amdgpu_virt_init_data_exchange(adev); r = amdgpu_ib_pool_init(adev); if (r) { diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c index 5217eadd7214..16bfb36c27e4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c @@ -584,20 +584,20 @@ void amdgpu_virt_init_data_exchange(struct amdgpu_device *adev) adev->virt.fw_reserve.p_vf2pf = NULL; adev->virt.vf2pf_update_interval_ms = 0; - if (adev->bios != NULL) { - adev->virt.vf2pf_update_interval_ms = 2000; + if (adev->mman.fw_vram_usage_va != NULL) { + /* go through this logic in ip_init and reset to init workqueue*/ + amdgpu_virt_exchange_data(adev); + INIT_DELAYED_WORK(&adev->virt.vf2pf_work, amdgpu_virt_update_vf2pf_work_item); + schedule_delayed_work(&(adev->virt.vf2pf_work), msecs_to_jiffies(adev->virt.vf2pf_update_interval_ms)); + } else if (adev->bios != NULL) { + /* got through this logic in early init stage to get necessary flags, e.g. rlcg_acc related*/ adev->virt.fw_reserve.p_pf2vf = (struct amd_sriov_msg_pf2vf_info_header *) (adev->bios + (AMD_SRIOV_MSG_PF2VF_OFFSET_KB << 10)); amdgpu_virt_read_pf2vf_data(adev); } - - if (adev->virt.vf2pf_update_interval_ms != 0) { - INIT_DELAYED_WORK(&adev->virt.vf2pf_work, amdgpu_virt_update_vf2pf_work_item); - schedule_delayed_work(&(adev->virt.vf2pf_work), msecs_to_jiffies(adev->virt.vf2pf_update_interval_ms)); - } } @@ -633,12 +633,6 @@ void amdgpu_virt_exchange_data(struct amdgpu_device *adev) if (adev->virt.ras_init_done) amdgpu_virt_add_bad_page(adev, bp_block_offset, bp_block_size); } - } else if (adev->bios != NULL) { - adev->virt.fw_reserve.p_pf2vf = - (struct amd_sriov_msg_pf2vf_info_header *) - (adev->bios + (AMD_SRIOV_MSG_PF2VF_OFFSET_KB << 10)); - - amdgpu_virt_read_pf2vf_data(adev); } } -- 2.25.1
From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> stable inclusion from stable-v5.10.146 commit 7f11386733abcc420ef1f11111bf32c6aeb80815 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit e77cab77f2cb3a1ca2ba8df4af45bb35617ac16d upstream. A very common pattern in the drivers is to advance xmit tail index and do bookkeeping of Tx'ed characters. Create uart_xmit_advance() to handle it. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220901143934.8850-2-ilpo.jarvinen@linux.intel.co... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- include/linux/serial_core.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 9c1292ea47fd..59a8caf3230a 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -300,6 +300,23 @@ struct uart_state { /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 +/** + * uart_xmit_advance - Advance xmit buffer and account Tx'ed chars + * @up: uart_port structure describing the port + * @chars: number of characters sent + * + * This function advances the tail of circular xmit buffer by the number of + * @chars transmitted and handles accounting of transmitted bytes (into + * @up's icount.tx). + */ +static inline void uart_xmit_advance(struct uart_port *up, unsigned int chars) +{ + struct circ_buf *xmit = &up->state->xmit; + + xmit->tail = (xmit->tail + chars) & (UART_XMIT_SIZE - 1); + up->icount.tx += chars; +} + struct module; struct tty_driver; -- 2.25.1
From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> stable inclusion from stable-v5.10.146 commit e1993864a935cb2e0472f23a72f9cc7212f316ec category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 754f68044c7dd6c52534ba3e0f664830285c4b15 upstream. DMA complete & stop paths did not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.co... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/serial/serial-tegra.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index c2be22c3b7d1..cda71802b698 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -520,7 +520,7 @@ static void tegra_uart_tx_dma_complete(void *args) count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); spin_lock_irqsave(&tup->uport.lock, flags); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(&tup->uport, count); tup->tx_in_progress = 0; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&tup->uport); @@ -608,7 +608,6 @@ static unsigned int tegra_uart_tx_empty(struct uart_port *u) static void tegra_uart_stop_tx(struct uart_port *u) { struct tegra_uart_port *tup = to_tegra_uport(u); - struct circ_buf *xmit = &tup->uport.state->xmit; struct dma_tx_state state; unsigned int count; @@ -619,7 +618,7 @@ static void tegra_uart_stop_tx(struct uart_port *u) dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(&tup->uport, count); tup->tx_in_progress = 0; } -- 2.25.1
From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> stable inclusion from stable-v5.10.146 commit fb189aa1be09a755683545cb451f764f4e636b38 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 1d10cd4da593bc0196a239dcc54dac24b6b0a74e upstream. Tx'ing does not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: 2d908b38d409 ("serial: Add Tegra Combined UART driver") Cc: <stable@vger.kernel.org> # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220901143934.8850-4-ilpo.jarvinen@linux.intel.co... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/tty/serial/tegra-tcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c index aaf8748a6147..31ae705aa38b 100644 --- a/drivers/tty/serial/tegra-tcu.c +++ b/drivers/tty/serial/tegra-tcu.c @@ -101,7 +101,7 @@ static void tegra_tcu_uart_start_tx(struct uart_port *port) break; tegra_tcu_write(tcu, &xmit->buf[xmit->tail], count); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(port, count); } uart_write_wakeup(port); -- 2.25.1
From: Stefan Haberland <sth@linux.ibm.com> stable inclusion from stable-v5.10.146 commit f5fcc9d6d71d9ff7fdbdd4b89074e6e24fffc20b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit db7ba07108a48c0f95b74fabbfd5d63e924f992d upstream. Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup pointer being NULL. The pavgroup pointer is checked on the entrance of the function but without the lcu->lock being held. Therefore there is a race window between dasd_alias_get_start_dev() and _lcu_update() which sets pavgroup to NULL with the lcu->lock held. Fix by checking the pavgroup pointer with lcu->lock held. Cc: <stable@vger.kernel.org> # 2.6.25+ Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/s390/block/dasd_alias.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index dc78a523a69f..b6b938aa6615 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -675,12 +675,12 @@ int dasd_alias_remove_device(struct dasd_device *device) struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) { struct dasd_eckd_private *alias_priv, *private = base_device->private; - struct alias_pav_group *group = private->pavgroup; struct alias_lcu *lcu = private->lcu; struct dasd_device *alias_device; + struct alias_pav_group *group; unsigned long flags; - if (!group || !lcu) + if (!lcu) return NULL; if (lcu->pav == NO_PAV || lcu->flags & (NEED_UAC_UPDATE | UPDATE_PENDING)) @@ -697,6 +697,11 @@ struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) } spin_lock_irqsave(&lcu->lock, flags); + group = private->pavgroup; + if (!group) { + spin_unlock_irqrestore(&lcu->lock, flags); + return NULL; + } alias_device = group->next; if (!alias_device) { if (list_empty(&group->aliaslist)) { -- 2.25.1
From: Chunfeng Yun <chunfeng.yun@mediatek.com> stable inclusion from stable-v5.10.146 commit f31ea57c1183415b7069853a8a57ec9288dc4aef category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit de5107f473190538a65aac7edea85209cd5c1a8f upstream. Bus bandwidth array access is based on esit, increase one will cause out-of-bounds issue; for example, when esit is XHCI_MTK_MAX_ESIT, will overstep boundary. Fixes: 7c986fbc16ae ("usb: xhci-mtk: get the microframe boundary for ESIT") Cc: <stable@vger.kernel.org> Reported-by: Stan Lu <stan.lu@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1629189389-18779-5-git-send-email-chunfeng.yun@med... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/host/xhci-mtk-sch.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 4a7b200674ea..86c4bc9df3b8 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -539,10 +539,12 @@ static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep) u32 boundary = sch_ep->esit; if (sch_ep->sch_tt) { /* LS/FS with TT */ - /* tune for CS */ - if (sch_ep->ep_type != ISOC_OUT_EP) - boundary++; - else if (boundary > 1) /* normally esit >= 8 for FS/LS */ + /* + * tune for CS, normally esit >= 8 for FS/LS, + * not add one for other types to avoid access array + * out of boundary + */ + if (sch_ep->ep_type == ISOC_OUT_EP && boundary > 1) boundary--; } -- 2.25.1
From: Daniel Jordan <daniel.m.jordan@oracle.com> stable inclusion from stable-v5.10.146 commit 8c6fd05cf8874e683dfb2749926363faeb3324e0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 4ab4fcfce5b540227d80eb32f1db45ab615f7c92 upstream. vaddr_get_pfns() now returns the positive number of pfns successfully gotten instead of zero. vfio_pin_page_external() might return 1 to vfio_iommu_type1_pin_pages(), which will treat it as an error, if vaddr_get_pfns() is successful but vfio_pin_page_external() doesn't reach vfio_lock_acct(). Fix it up in vfio_pin_page_external(). Found by inspection. Fixes: be16c1fd99f4 ("vfio/type1: Change success value of vaddr_get_pfn()") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Message-Id: <20210308172452.38864-1-daniel.m.jordan@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/vfio/vfio_iommu_type1.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index 23b3f74f4c9e..b39515935ea4 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -685,7 +685,12 @@ static int vfio_pin_page_external(struct vfio_dma *dma, unsigned long vaddr, return -ENODEV; ret = vaddr_get_pfns(mm, vaddr, 1, dma->prot, pfn_base, pages); - if (ret == 1 && do_accounting && !is_invalid_reserved_pfn(*pfn_base)) { + if (ret != 1) + goto out; + + ret = 0; + + if (do_accounting && !is_invalid_reserved_pfn(*pfn_base)) { ret = vfio_lock_acct(dma, 1, true); if (ret) { put_pfn(*pfn_base, dma->prot); @@ -697,6 +702,7 @@ static int vfio_pin_page_external(struct vfio_dma *dma, unsigned long vaddr, } } +out: mmput(mm); return ret; } -- 2.25.1
From: Luben Tuikov <luben.tuikov@amd.com> stable inclusion from stable-v5.10.146 commit 09867977fcc258caab84031445345bdf3c2e0531 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 084e2640e51626f413f85663e3ba7e32d4272477 ] Use positive logic to check for RAS support. Rename the function to actually indicate what it is testing for. Essentially, make the function a predicate with the correct name. Cc: Stanley Yang <Stanley.Yang@amd.com> Cc: Alexander Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Stable-dep-of: 6c2049066355 ("drm/amdgpu: Don't enable LTR if not supported") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c index eb22a190c242..3638f0e12a2b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c @@ -1979,15 +1979,12 @@ int amdgpu_ras_request_reset_on_boot(struct amdgpu_device *adev, return 0; } -static int amdgpu_ras_check_asic_type(struct amdgpu_device *adev) +static bool amdgpu_ras_asic_supported(struct amdgpu_device *adev) { - if (adev->asic_type != CHIP_VEGA10 && - adev->asic_type != CHIP_VEGA20 && - adev->asic_type != CHIP_ARCTURUS && - adev->asic_type != CHIP_SIENNA_CICHLID) - return 1; - else - return 0; + return adev->asic_type == CHIP_VEGA10 || + adev->asic_type == CHIP_VEGA20 || + adev->asic_type == CHIP_ARCTURUS || + adev->asic_type == CHIP_SIENNA_CICHLID; } /* @@ -2006,7 +2003,7 @@ static void amdgpu_ras_check_supported(struct amdgpu_device *adev, *supported = 0; if (amdgpu_sriov_vf(adev) || !adev->is_atom_fw || - amdgpu_ras_check_asic_type(adev)) + !amdgpu_ras_asic_supported(adev)) return; if (amdgpu_atomfirmware_mem_ecc_supported(adev)) { -- 2.25.1
From: David Howells <dhowells@redhat.com> stable inclusion from stable-v5.10.146 commit 877231b0e67845c351b3ef4b5b5943c1e77b8ee9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit cf0604a686b11175d8beae60281c4ccc95aaa5c2 ] The iterator, ITER_DISCARD, that can only be used in READ mode and just discards any data copied to it, was added to allow a network filesystem to discard any unwanted data sent by a server. Convert cifs_discard_from_socket() to use this. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Stable-dep-of: bedc8f76b353 ("cifs: always initialize struct msghdr smb_msg completely") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/cifs/cifsproto.h | 2 ++ fs/cifs/cifssmb.c | 6 +++--- fs/cifs/connect.c | 17 +++++++++++++++++ 3 files changed, 22 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 24c6f36177ba..a6ca4eda9a5a 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -230,6 +230,8 @@ extern unsigned int setup_special_user_owner_ACE(struct cifs_ace *pace); extern void dequeue_mid(struct mid_q_entry *mid, bool malformed); extern int cifs_read_from_socket(struct TCP_Server_Info *server, char *buf, unsigned int to_read); +extern ssize_t cifs_discard_from_socket(struct TCP_Server_Info *server, + size_t to_read); extern int cifs_read_page_from_socket(struct TCP_Server_Info *server, struct page *page, unsigned int page_offset, diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 0496934feecb..c279527aae92 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1451,9 +1451,9 @@ cifs_discard_remaining_data(struct TCP_Server_Info *server) while (remaining > 0) { int length; - length = cifs_read_from_socket(server, server->bigbuf, - min_t(unsigned int, remaining, - CIFSMaxBufSize + MAX_HEADER_SIZE(server))); + length = cifs_discard_from_socket(server, + min_t(size_t, remaining, + CIFSMaxBufSize + MAX_HEADER_SIZE(server))); if (length < 0) return length; server->total_read += length; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0a2eced46e35..ef9d3b763589 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -755,6 +755,23 @@ cifs_read_from_socket(struct TCP_Server_Info *server, char *buf, return cifs_readv_from_socket(server, &smb_msg); } +ssize_t +cifs_discard_from_socket(struct TCP_Server_Info *server, size_t to_read) +{ + struct msghdr smb_msg; + + /* + * iov_iter_discard already sets smb_msg.type and count and iov_offset + * and cifs_readv_from_socket sets msg_control and msg_controllen + * so little to initialize in struct msghdr + */ + smb_msg.msg_name = NULL; + smb_msg.msg_namelen = 0; + iov_iter_discard(&smb_msg.msg_iter, READ, to_read); + + return cifs_readv_from_socket(server, &smb_msg); +} + int cifs_read_page_from_socket(struct TCP_Server_Info *server, struct page *page, unsigned int page_offset, unsigned int to_read) -- 2.25.1
From: Stefan Metzmacher <metze@samba.org> stable inclusion from stable-v5.10.146 commit 2a2e503a62e5c3efdad7749bb13c64e09e8c377d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit bedc8f76b3539ac4f952114b316bcc2251e808ce ] So far we were just lucky because the uninitialized members of struct msghdr are not used by default on a SOCK_STREAM tcp socket. But as new things like msg_ubuf and sg_from_iter where added recently, we should play on the safe side and avoid potention problems in future. Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/cifs/connect.c | 11 +++-------- fs/cifs/transport.c | 6 +----- 2 files changed, 4 insertions(+), 13 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index ef9d3b763589..b91a6e47f37d 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -695,9 +695,6 @@ cifs_readv_from_socket(struct TCP_Server_Info *server, struct msghdr *smb_msg) int length = 0; int total_read; - smb_msg->msg_control = NULL; - smb_msg->msg_controllen = 0; - for (total_read = 0; msg_data_left(smb_msg); total_read += length) { try_to_freeze(); @@ -748,7 +745,7 @@ int cifs_read_from_socket(struct TCP_Server_Info *server, char *buf, unsigned int to_read) { - struct msghdr smb_msg; + struct msghdr smb_msg = {}; struct kvec iov = {.iov_base = buf, .iov_len = to_read}; iov_iter_kvec(&smb_msg.msg_iter, READ, &iov, 1, to_read); @@ -758,15 +755,13 @@ cifs_read_from_socket(struct TCP_Server_Info *server, char *buf, ssize_t cifs_discard_from_socket(struct TCP_Server_Info *server, size_t to_read) { - struct msghdr smb_msg; + struct msghdr smb_msg = {}; /* * iov_iter_discard already sets smb_msg.type and count and iov_offset * and cifs_readv_from_socket sets msg_control and msg_controllen * so little to initialize in struct msghdr */ - smb_msg.msg_name = NULL; - smb_msg.msg_namelen = 0; iov_iter_discard(&smb_msg.msg_iter, READ, to_read); return cifs_readv_from_socket(server, &smb_msg); @@ -776,7 +771,7 @@ int cifs_read_page_from_socket(struct TCP_Server_Info *server, struct page *page, unsigned int page_offset, unsigned int to_read) { - struct msghdr smb_msg; + struct msghdr smb_msg = {}; struct bio_vec bv = { .bv_page = page, .bv_len = to_read, .bv_offset = page_offset}; iov_iter_bvec(&smb_msg.msg_iter, READ, &bv, 1, to_read); diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 383ae8744c33..b137006f0fd2 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -209,10 +209,6 @@ smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, *sent = 0; - smb_msg->msg_name = NULL; - smb_msg->msg_namelen = 0; - smb_msg->msg_control = NULL; - smb_msg->msg_controllen = 0; if (server->noblocksnd) smb_msg->msg_flags = MSG_DONTWAIT + MSG_NOSIGNAL; else @@ -324,7 +320,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst, sigset_t mask, oldmask; size_t total_len = 0, sent, size; struct socket *ssocket = server->ssocket; - struct msghdr smb_msg; + struct msghdr smb_msg = {}; __be32 rfc1002_marker; if (cifs_rdma_enabled(server)) { -- 2.25.1
From: Vitaly Kuznetsov <vkuznets@redhat.com> stable inclusion from stable-v5.10.146 commit ec2bf249bdff8d5eb56cba5665a685b602d045fb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ] Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g. $ cat /proc/iomem ... f8000000-fffbffff : PCI Bus 0000:00 f8000000-fbffffff : 0000:00:08.0 f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe ... fe0000000-fffffffff : PCI Bus 0000:00 fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe fe0000000-fe07fffff : 2ba2:00:02.0 fe0000000-fe07fffff : mlx4_core the interesting part is the 'f8000000' region as it is actually the VM's framebuffer: $ lspci -v ... 0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] ... hv_vmbus: registering driver hyperv_drm hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff] hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active? Note: "Cannot request framebuffer" is not a fatal error in hyperv_setup_gen1() as the code assumes there's some other framebuffer device there but we actually have some other PCI device (mlx4 in this case) config space there! The problem appears to be that vmbus_allocate_mmio() can use dedicated framebuffer region to serve any MMIO request from any device. The semantics one might assume of a parameter named "fb_overlap_ok" aren't implemented because !fb_overlap_ok essentially has no effect. The existing semantics are really "prefer_fb_overlap". This patch implements the expected and needed semantics, which is to not allocate from the frame buffer space when !fb_overlap_ok. Note, Gen2 VMs are usually unaffected by the issue because framebuffer region is already taken by EFI fb (in case kernel supports it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers load after it. Devices can be brought up in any sequence so let's resolve the issue by always ignoring 'fb_mmio' region for non-FB requests, even if the region is unclaimed. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/hv/vmbus_drv.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 5d820037e291..514279dac7cb 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -2251,7 +2251,7 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, bool fb_overlap_ok) { struct resource *iter, *shadow; - resource_size_t range_min, range_max, start; + resource_size_t range_min, range_max, start, end; const char *dev_n = dev_name(&device_obj->device); int retval; @@ -2286,6 +2286,14 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, range_max = iter->end; start = (range_min + align - 1) & ~(align - 1); for (; start + size - 1 <= range_max; start += align) { + end = start + size - 1; + + /* Skip the whole fb_mmio region if not fb_overlap_ok */ + if (!fb_overlap_ok && fb_mmio && + (((start >= fb_mmio->start) && (start <= fb_mmio->end)) || + ((end >= fb_mmio->start) && (end <= fb_mmio->end)))) + continue; + shadow = __request_region(iter, start, size, NULL, IORESOURCE_BUSY); if (!shadow) -- 2.25.1
From: Hans de Goede <hdegoede@redhat.com> stable inclusion from stable-v5.10.146 commit c5812807e416618477d1bb0049727ce8bb8292fd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 63e37a79f7bd939314997e29c2f5a9f0ef184281 ] gma_crtc_page_flip() was holding the event_lock spinlock while calling crtc_funcs->mode_set_base() which takes ww_mutex. The only reason to hold event_lock is to clear gma_crtc->page_flip_event on mode_set_base() errors. Instead unlock it after setting gma_crtc->page_flip_event and on errors re-take the lock and clear gma_crtc->page_flip_event it it is still set. This fixes the following WARN/stacktrace: [ 512.122953] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:870 [ 512.123004] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1253, name: gnome-shell [ 512.123031] preempt_count: 1, expected: 0 [ 512.123048] RCU nest depth: 0, expected: 0 [ 512.123066] INFO: lockdep is turned off. [ 512.123080] irq event stamp: 0 [ 512.123094] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 512.123134] hardirqs last disabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0 [ 512.123176] softirqs last enabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0 [ 512.123207] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 512.123233] Preemption disabled at: [ 512.123241] [<0000000000000000>] 0x0 [ 512.123275] CPU: 3 PID: 1253 Comm: gnome-shell Tainted: G W 5.19.0+ #1 [ 512.123304] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013 [ 512.123323] Call Trace: [ 512.123346] <TASK> [ 512.123370] dump_stack_lvl+0x5b/0x77 [ 512.123412] __might_resched.cold+0xff/0x13a [ 512.123458] ww_mutex_lock+0x1e/0xa0 [ 512.123495] psb_gem_pin+0x2c/0x150 [gma500_gfx] [ 512.123601] gma_pipe_set_base+0x76/0x240 [gma500_gfx] [ 512.123708] gma_crtc_page_flip+0x95/0x130 [gma500_gfx] [ 512.123808] drm_mode_page_flip_ioctl+0x57d/0x5d0 [ 512.123897] ? drm_mode_cursor2_ioctl+0x10/0x10 [ 512.123936] drm_ioctl_kernel+0xa1/0x150 [ 512.123984] drm_ioctl+0x21f/0x420 [ 512.124025] ? drm_mode_cursor2_ioctl+0x10/0x10 [ 512.124070] ? rcu_read_lock_bh_held+0xb/0x60 [ 512.124104] ? lock_release+0x1ef/0x2d0 [ 512.124161] __x64_sys_ioctl+0x8d/0xd0 [ 512.124203] do_syscall_64+0x58/0x80 [ 512.124239] ? do_syscall_64+0x67/0x80 [ 512.124267] ? trace_hardirqs_on_prepare+0x55/0xe0 [ 512.124300] ? do_syscall_64+0x67/0x80 [ 512.124340] ? rcu_read_lock_sched_held+0x10/0x80 [ 512.124377] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 512.124411] RIP: 0033:0x7fcc4a70740f [ 512.124442] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 [ 512.124470] RSP: 002b:00007ffda73f5390 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 512.124503] RAX: ffffffffffffffda RBX: 000055cc9e474500 RCX: 00007fcc4a70740f [ 512.124524] RDX: 00007ffda73f5420 RSI: 00000000c01864b0 RDI: 0000000000000009 [ 512.124544] RBP: 00007ffda73f5420 R08: 000055cc9c0b0cb0 R09: 0000000000000034 [ 512.124564] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c01864b0 [ 512.124584] R13: 0000000000000009 R14: 000055cc9df484d0 R15: 000055cc9af5d0c0 [ 512.124647] </TASK> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-2-hdegoe... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/gma500/gma_display.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/gma500/gma_display.c b/drivers/gpu/drm/gma500/gma_display.c index 3df6d6e850f5..70148ae16f14 100644 --- a/drivers/gpu/drm/gma500/gma_display.c +++ b/drivers/gpu/drm/gma500/gma_display.c @@ -529,15 +529,18 @@ int gma_crtc_page_flip(struct drm_crtc *crtc, WARN_ON(drm_crtc_vblank_get(crtc) != 0); gma_crtc->page_flip_event = event; + spin_unlock_irqrestore(&dev->event_lock, flags); /* Call this locked if we want an event at vblank interrupt. */ ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); if (ret) { - gma_crtc->page_flip_event = NULL; - drm_crtc_vblank_put(crtc); + spin_lock_irqsave(&dev->event_lock, flags); + if (gma_crtc->page_flip_event) { + gma_crtc->page_flip_event = NULL; + drm_crtc_vblank_put(crtc); + } + spin_unlock_irqrestore(&dev->event_lock, flags); } - - spin_unlock_irqrestore(&dev->event_lock, flags); } else { ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); } -- 2.25.1
From: Hamza Mahfooz <hamza.mahfooz@amd.com> stable inclusion from stable-v5.10.146 commit 867b2b2b6802fb3995a0065fc39e0e7e20d8004d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 66f99628eb24409cb8feb5061f78283c8b65f820 ] Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs struct. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 7cc7af2a6822..947f50e402ba 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -35,6 +35,7 @@ #include <linux/pci.h> #include <linux/pm_runtime.h> #include <drm/drm_crtc_helper.h> +#include <drm/drm_damage_helper.h> #include <drm/drm_edid.h> #include <drm/drm_gem_framebuffer_helper.h> #include <drm/drm_fb_helper.h> @@ -498,6 +499,7 @@ bool amdgpu_display_ddc_probe(struct amdgpu_connector *amdgpu_connector, static const struct drm_framebuffer_funcs amdgpu_fb_funcs = { .destroy = drm_gem_fb_destroy, .create_handle = drm_gem_fb_create_handle, + .dirty = drm_atomic_helper_dirtyfb, }; uint32_t amdgpu_display_supported_domains(struct amdgpu_device *adev, -- 2.25.1
From: Yao Wang1 <Yao.Wang1@amd.com> stable inclusion from stable-v5.10.146 commit 3ae1dede22e380788dfa284e099a9b5c51951acd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 3601d620f22e37740cf73f8278eabf9f2aa19eb7 ] [Why] For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value. [How] Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Yao Wang1 <Yao.Wang1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/display/modules/color/color_gamma.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c index 09bc2c249e1a..3c4390d71a82 100644 --- a/drivers/gpu/drm/amd/display/modules/color/color_gamma.c +++ b/drivers/gpu/drm/amd/display/modules/color/color_gamma.c @@ -1524,6 +1524,7 @@ static void interpolate_user_regamma(uint32_t hw_points_num, struct fixed31_32 lut2; struct fixed31_32 delta_lut; struct fixed31_32 delta_index; + const struct fixed31_32 one = dc_fixpt_from_int(1); i = 0; /* fixed_pt library has problems handling too small values */ @@ -1552,6 +1553,9 @@ static void interpolate_user_regamma(uint32_t hw_points_num, } else hw_x = coordinates_x[i].x; + if (dc_fixpt_le(one, hw_x)) + hw_x = one; + norm_x = dc_fixpt_mul(norm_factor, hw_x); index = dc_fixpt_floor(norm_x); if (index < 0 || index > 255) -- 2.25.1
From: Nathan Chancellor <nathan@kernel.org> stable inclusion from stable-v5.10.146 commit 58101a9cfc5f0a862637f8418bf935ec86031ba5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 41012d715d5d7b9751ae84b8fb255e404ac9c5d0 ] This function consumes a lot of stack space and it blows up the size of dml30_ModeSupportAndSystemConfigurationFull() with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Commit a0f7e7f759cf ("drm/amd/display: fix i386 frame size warning") aimed to address this for i386 but it did not help x86_64. To reduce the amount of stack space that dml30_ModeSupportAndSystemConfigurationFull() uses, mark UseMinimumDCFCLK() as noinline, using the _for_stack variant for documentation. While this will increase the total amount of stack usage between the two functions (1632 and 1304 bytes respectively), it will make sure both stay below the limit of 2048 bytes for these files. The aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage so it should not be reverted in favor of this change. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com> Tested-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c index 2663f1b31842..e427f4ffa080 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c @@ -6653,8 +6653,7 @@ static double CalculateUrgentLatency( return ret; } - -static void UseMinimumDCFCLK( +static noinline_for_stack void UseMinimumDCFCLK( struct display_mode_lib *mode_lib, int MaxInterDCNTileRepeaters, int MaxPrefetchMode, -- 2.25.1
From: Nathan Huckleberry <nhuck@google.com> stable inclusion from stable-v5.10.146 commit 4dfc96d8d730e8846a1b8a7c90e7059bae5426b6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit b0b9408f132623dc88e78adb5282f74e4b64bb57 ] The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of cdn_dp_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220913205555.155149-1-nhuck@... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/rockchip/cdn-dp-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c index dec54c70e008..857c47c69ef1 100644 --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c @@ -276,8 +276,9 @@ static int cdn_dp_connector_get_modes(struct drm_connector *connector) return ret; } -static int cdn_dp_connector_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) +static enum drm_mode_status +cdn_dp_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) { struct cdn_dp_device *dp = connector_to_dp(connector); struct drm_display_info *display_info = &dp->connector.display_info; -- 2.25.1
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> stable inclusion from stable-v5.10.146 commit 90f1c0025be0ed341c5ba27aed58233de32c7d0a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c0feea594e058223973db94c1c32a830c9807c86 ] Like Hillf Danton mentioned syzbot should have been able to catch cancel_work_sync() in work context by checking lockdep_map in __flush_work() for both flush and cancel. in [1], being unable to report an obvious deadlock scenario shown below is broken. From locking dependency perspective, sync version of cancel request should behave as if flush request, for it waits for completion of work if that work has already started execution. ---------- #include <linux/module.h> #include <linux/sched.h> static DEFINE_MUTEX(mutex); static void work_fn(struct work_struct *work) { schedule_timeout_uninterruptible(HZ / 5); mutex_lock(&mutex); mutex_unlock(&mutex); } static DECLARE_WORK(work, work_fn); static int __init test_init(void) { schedule_work(&work); schedule_timeout_uninterruptible(HZ / 10); mutex_lock(&mutex); cancel_work_sync(&work); mutex_unlock(&mutex); return -EINVAL; } module_init(test_init); MODULE_LICENSE("GPL"); ---------- The check this patch restores was added by commit 0976dfc1d0cd80a4 ("workqueue: Catch more locking problems with flush_work()"). Then, lockdep's crossrelease feature was added by commit b09be676e0ff25bd ("locking/lockdep: Implement the 'crossrelease' feature"). As a result, this check was once removed by commit fd1a5b04dfb899f8 ("workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes"). But lockdep's crossrelease feature was removed by commit e966eaeeb623f099 ("locking/lockdep: Remove the cross-release locking checks"). At this point, this check should have been restored. Then, commit d6e89786bed977f3 ("workqueue: skip lockdep wq dependency in cancel_work_sync()") introduced a boolean flag in order to distinguish flush_work() and cancel_work_sync(), for checking "struct workqueue_struct" dependency when called from cancel_work_sync() was causing false positives. Then, commit 87915adc3f0acdf0 ("workqueue: re-add lockdep dependencies for flushing") tried to restore "struct work_struct" dependency check, but by error checked this boolean flag. Like an example shown above indicates, "struct work_struct" dependency needs to be checked for both flush_work() and cancel_work_sync(). Link: https://lkml.kernel.org/r/20220504044800.4966-1-hdanton@sina.com [1] Reported-by: Hillf Danton <hdanton@sina.com> Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com> Fixes: 87915adc3f0acdf0 ("workqueue: re-add lockdep dependencies for flushing") Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- kernel/workqueue.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index a27605c17f07..9db32d9739f5 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -3048,10 +3048,8 @@ static bool __flush_work(struct work_struct *work, bool from_cancel) if (WARN_ON(!work->func)) return false; - if (!from_cancel) { - lock_map_acquire(&work->lockdep_map); - lock_map_release(&work->lockdep_map); - } + lock_map_acquire(&work->lockdep_map); + lock_map_release(&work->lockdep_map); if (start_flush_work(work, &barr, from_cancel)) { wait_for_completion(&barr.done); -- 2.25.1
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> stable inclusion from stable-v5.10.146 commit 2f58c47c36d3f13c2c7368f9fd12636a22e1101a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 085aacaa73163f4b8a89dec24ecb32cfacd34017 ] pm_runtime_get_sync() returning 1 also means the device is powered. So resetting the chip registers in .remove() is possible and should be done. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: d98bdd3a5b50 ("i2c: imx: Make sure to unregister adapter on remove()") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/i2c/busses/i2c-imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index d3719df1c40d..be4ad516293b 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1289,7 +1289,7 @@ static int i2c_imx_remove(struct platform_device *pdev) if (i2c_imx->dma) i2c_imx_dma_free(i2c_imx); - if (ret == 0) { + if (ret >= 0) { /* setup chip registers to defaults */ imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR); imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR); -- 2.25.1
From: Asmaa Mnebhi <asmaa@nvidia.com> stable inclusion from stable-v5.10.146 commit 4f6db1f9219e8b122da64342b7daaf12eb8e8de2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2a5be6d1340c0fefcee8a6489cff7fd88a0d5b85 ] Correct the base address used during io write. This bug had no impact over the overall functionality of the read and write transactions. MLXBF_I2C_CAUSE_OR_CLEAR=0x18 so writing to (smbus->io + 0x18) instead of (mst_cause->ioi + 0x18) actually writes to the sc_low_timeout register which just sets the timeout value before a read/write aborts. Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC) Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/i2c/busses/i2c-mlxbf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c index ab261d762dea..042c83b90734 100644 --- a/drivers/i2c/busses/i2c-mlxbf.c +++ b/drivers/i2c/busses/i2c-mlxbf.c @@ -675,7 +675,7 @@ static int mlxbf_i2c_smbus_enable(struct mlxbf_i2c_priv *priv, u8 slave, /* Clear status bits. */ writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_STATUS); /* Set the cause data. */ - writel(~0x0, priv->smbus->io + MLXBF_I2C_CAUSE_OR_CLEAR); + writel(~0x0, priv->mst_cause->io + MLXBF_I2C_CAUSE_OR_CLEAR); /* Zero PEC byte. */ writel(0x0, priv->smbus->io + MLXBF_I2C_SMBUS_MASTER_PEC); /* Zero byte count. */ -- 2.25.1
From: Asmaa Mnebhi <asmaa@nvidia.com> stable inclusion from stable-v5.10.146 commit 48ee0a864d1af02eea98fc825cc230d61517a71e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit de24aceb07d426b6f1c59f33889d6a964770547b ] memcpy() is called in a loop while 'operation->length' upper bound is not checked and 'data_idx' also increments. Fixes: b5b5b32081cd206b ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/i2c/busses/i2c-mlxbf.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c index 042c83b90734..d78fb24d5588 100644 --- a/drivers/i2c/busses/i2c-mlxbf.c +++ b/drivers/i2c/busses/i2c-mlxbf.c @@ -744,6 +744,9 @@ mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv, if (flags & MLXBF_I2C_F_WRITE) { write_en = 1; write_len += operation->length; + if (data_idx + operation->length > + MLXBF_I2C_MASTER_DATA_DESC_SIZE) + return -ENOBUFS; memcpy(data_desc + data_idx, operation->buffer, operation->length); data_idx += operation->length; -- 2.25.1
From: Asmaa Mnebhi <asmaa@nvidia.com> stable inclusion from stable-v5.10.146 commit 0fa11239c4d332e9b1db5b23e297bf19419bb7cc category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 37f071ec327b04c83d47637c5e5c2199b39899ca ] The i2c-mlxbf.c driver is currently broken because there is a bug in the calculation of the frequency. core_f, core_r and core_od are components read from hardware registers and are used to compute the frequency used to compute different timing parameters. The shifting mechanism used to get core_f, core_r and core_od is wrong. Use FIELD_GET to mask and shift the bitfields properly. Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC) Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/i2c/busses/i2c-mlxbf.c | 63 +++++++++++++--------------------- 1 file changed, 23 insertions(+), 40 deletions(-) diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c index d78fb24d5588..bea82a787b4f 100644 --- a/drivers/i2c/busses/i2c-mlxbf.c +++ b/drivers/i2c/busses/i2c-mlxbf.c @@ -6,6 +6,7 @@ */ #include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/interrupt.h> @@ -63,13 +64,14 @@ */ #define MLXBF_I2C_TYU_PLL_OUT_FREQ (400 * 1000 * 1000) /* Reference clock for Bluefield - 156 MHz. */ -#define MLXBF_I2C_PLL_IN_FREQ (156 * 1000 * 1000) +#define MLXBF_I2C_PLL_IN_FREQ 156250000ULL /* Constant used to determine the PLL frequency. */ -#define MLNXBF_I2C_COREPLL_CONST 16384 +#define MLNXBF_I2C_COREPLL_CONST 16384ULL + +#define MLXBF_I2C_FREQUENCY_1GHZ 1000000000ULL /* PLL registers. */ -#define MLXBF_I2C_CORE_PLL_REG0 0x0 #define MLXBF_I2C_CORE_PLL_REG1 0x4 #define MLXBF_I2C_CORE_PLL_REG2 0x8 @@ -187,22 +189,15 @@ enum { #define MLXBF_I2C_COREPLL_FREQ MLXBF_I2C_TYU_PLL_OUT_FREQ /* Core PLL TYU configuration. */ -#define MLXBF_I2C_COREPLL_CORE_F_TYU_MASK GENMASK(12, 0) -#define MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK GENMASK(3, 0) -#define MLXBF_I2C_COREPLL_CORE_R_TYU_MASK GENMASK(5, 0) - -#define MLXBF_I2C_COREPLL_CORE_F_TYU_SHIFT 3 -#define MLXBF_I2C_COREPLL_CORE_OD_TYU_SHIFT 16 -#define MLXBF_I2C_COREPLL_CORE_R_TYU_SHIFT 20 +#define MLXBF_I2C_COREPLL_CORE_F_TYU_MASK GENMASK(15, 3) +#define MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK GENMASK(19, 16) +#define MLXBF_I2C_COREPLL_CORE_R_TYU_MASK GENMASK(25, 20) /* Core PLL YU configuration. */ #define MLXBF_I2C_COREPLL_CORE_F_YU_MASK GENMASK(25, 0) #define MLXBF_I2C_COREPLL_CORE_OD_YU_MASK GENMASK(3, 0) -#define MLXBF_I2C_COREPLL_CORE_R_YU_MASK GENMASK(5, 0) +#define MLXBF_I2C_COREPLL_CORE_R_YU_MASK GENMASK(31, 26) -#define MLXBF_I2C_COREPLL_CORE_F_YU_SHIFT 0 -#define MLXBF_I2C_COREPLL_CORE_OD_YU_SHIFT 1 -#define MLXBF_I2C_COREPLL_CORE_R_YU_SHIFT 26 /* Core PLL frequency. */ static u64 mlxbf_i2c_corepll_frequency; @@ -485,8 +480,6 @@ static struct mutex mlxbf_i2c_bus_lock; #define MLXBF_I2C_MASK_8 GENMASK(7, 0) #define MLXBF_I2C_MASK_16 GENMASK(15, 0) -#define MLXBF_I2C_FREQUENCY_1GHZ 1000000000 - /* * Function to poll a set of bits at a specific address; it checks whether * the bits are equal to zero when eq_zero is set to 'true', and not equal @@ -1416,24 +1409,19 @@ static int mlxbf_i2c_init_master(struct platform_device *pdev, return 0; } -static u64 mlxbf_calculate_freq_from_tyu(struct mlxbf_i2c_resource *corepll_res) +static u64 mlxbf_i2c_calculate_freq_from_tyu(struct mlxbf_i2c_resource *corepll_res) { - u64 core_frequency, pad_frequency; + u64 core_frequency; u8 core_od, core_r; u32 corepll_val; u16 core_f; - pad_frequency = MLXBF_I2C_PLL_IN_FREQ; - corepll_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG1); /* Get Core PLL configuration bits. */ - core_f = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_F_TYU_SHIFT) & - MLXBF_I2C_COREPLL_CORE_F_TYU_MASK; - core_od = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_OD_TYU_SHIFT) & - MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK; - core_r = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_R_TYU_SHIFT) & - MLXBF_I2C_COREPLL_CORE_R_TYU_MASK; + core_f = FIELD_GET(MLXBF_I2C_COREPLL_CORE_F_TYU_MASK, corepll_val); + core_od = FIELD_GET(MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK, corepll_val); + core_r = FIELD_GET(MLXBF_I2C_COREPLL_CORE_R_TYU_MASK, corepll_val); /* * Compute PLL output frequency as follow: @@ -1445,31 +1433,26 @@ static u64 mlxbf_calculate_freq_from_tyu(struct mlxbf_i2c_resource *corepll_res) * Where PLL_OUT_FREQ and PLL_IN_FREQ refer to CoreFrequency * and PadFrequency, respectively. */ - core_frequency = pad_frequency * (++core_f); + core_frequency = MLXBF_I2C_PLL_IN_FREQ * (++core_f); core_frequency /= (++core_r) * (++core_od); return core_frequency; } -static u64 mlxbf_calculate_freq_from_yu(struct mlxbf_i2c_resource *corepll_res) +static u64 mlxbf_i2c_calculate_freq_from_yu(struct mlxbf_i2c_resource *corepll_res) { u32 corepll_reg1_val, corepll_reg2_val; - u64 corepll_frequency, pad_frequency; + u64 corepll_frequency; u8 core_od, core_r; u32 core_f; - pad_frequency = MLXBF_I2C_PLL_IN_FREQ; - corepll_reg1_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG1); corepll_reg2_val = readl(corepll_res->io + MLXBF_I2C_CORE_PLL_REG2); /* Get Core PLL configuration bits */ - core_f = rol32(corepll_reg1_val, MLXBF_I2C_COREPLL_CORE_F_YU_SHIFT) & - MLXBF_I2C_COREPLL_CORE_F_YU_MASK; - core_r = rol32(corepll_reg1_val, MLXBF_I2C_COREPLL_CORE_R_YU_SHIFT) & - MLXBF_I2C_COREPLL_CORE_R_YU_MASK; - core_od = rol32(corepll_reg2_val, MLXBF_I2C_COREPLL_CORE_OD_YU_SHIFT) & - MLXBF_I2C_COREPLL_CORE_OD_YU_MASK; + core_f = FIELD_GET(MLXBF_I2C_COREPLL_CORE_F_YU_MASK, corepll_reg1_val); + core_r = FIELD_GET(MLXBF_I2C_COREPLL_CORE_R_YU_MASK, corepll_reg1_val); + core_od = FIELD_GET(MLXBF_I2C_COREPLL_CORE_OD_YU_MASK, corepll_reg2_val); /* * Compute PLL output frequency as follow: @@ -1481,7 +1464,7 @@ static u64 mlxbf_calculate_freq_from_yu(struct mlxbf_i2c_resource *corepll_res) * Where PLL_OUT_FREQ and PLL_IN_FREQ refer to CoreFrequency * and PadFrequency, respectively. */ - corepll_frequency = (pad_frequency * core_f) / MLNXBF_I2C_COREPLL_CONST; + corepll_frequency = (MLXBF_I2C_PLL_IN_FREQ * core_f) / MLNXBF_I2C_COREPLL_CONST; corepll_frequency /= (++core_r) * (++core_od); return corepll_frequency; @@ -2189,14 +2172,14 @@ static struct mlxbf_i2c_chip_info mlxbf_i2c_chip[] = { [1] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_1], [2] = &mlxbf_i2c_gpio_res[MLXBF_I2C_CHIP_TYPE_1] }, - .calculate_freq = mlxbf_calculate_freq_from_tyu + .calculate_freq = mlxbf_i2c_calculate_freq_from_tyu }, [MLXBF_I2C_CHIP_TYPE_2] = { .type = MLXBF_I2C_CHIP_TYPE_2, .shared_res = { [0] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_2] }, - .calculate_freq = mlxbf_calculate_freq_from_yu + .calculate_freq = mlxbf_i2c_calculate_freq_from_yu } }; -- 2.25.1
From: Dan Williams <dan.j.williams@intel.com> stable inclusion from stable-v5.10.146 commit 25117265152ebc6d4f89b1a8ea6e336ea1e19a35 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 67feaba413ec68daf4124e9870878899b4ed9a0e upstream. The "hmem" platform-devices that are created to represent the platform-advertised "Soft Reserved" memory ranges end up inserting a resource that causes the iomem_resource tree to look like this: 340000000-43fffffff : hmem.0 340000000-43fffffff : Soft Reserved 340000000-43fffffff : dax0.0 This is because insert_resource() reparents ranges when they completely intersect an existing range. This matters because code that uses region_intersects() to scan for a given IORES_DESC will only check that top-level 'hmem.0' resource and not the 'Soft Reserved' descendant. So, to support EINJ (via einj_error_inject()) to inject errors into memory hosted by a dax-device, be sure to describe the memory as IORES_DESC_SOFT_RESERVED. This is a follow-on to: commit b13a3e5fd40b ("ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP") ...that fixed EINJ support for "Soft Reserved" ranges in the first instance. Fixes: 262b45ae3ab4 ("x86/efi: EFI soft reservation to E820 enumeration") Reported-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com> Tested-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com> Cc: <stable@vger.kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Omar Avelar <omar.avelar@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mark Gross <markgross@kernel.org> Link: https://lore.kernel.org/r/166397075670.389916.7435722208896316387.stgit@dwil... Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/dax/hmem/device.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dax/hmem/device.c b/drivers/dax/hmem/device.c index cb6401c9e9a4..acf31cc1dbcc 100644 --- a/drivers/dax/hmem/device.c +++ b/drivers/dax/hmem/device.c @@ -15,6 +15,7 @@ void hmem_register_device(int target_nid, struct resource *r) .start = r->start, .end = r->end, .flags = IORESOURCE_MEM, + .desc = IORES_DESC_SOFT_RESERVED, }; struct platform_device *pdev; struct memregion_info info; -- 2.25.1
From: Theodore Ts'o <tytso@mit.edu> stable inclusion from stable-v5.10.146 commit a968542d7e2471f3c75ed9380110049354e1de44 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 80fa46d6b9e7b1527bfd2197d75431fd9c382161 upstream. This patch avoids threads live-locking for hours when a large number threads are competing over the last few free extents as they blocks getting added and removed from preallocation pools. From our bug reporter: A reliable way for triggering this has multiple writers continuously write() to files when the filesystem is full, while small amounts of space are freed (e.g. by truncating a large file -1MiB at a time). In the local filesystem, this can be done by simply not checking the return code of write (0) and/or the error (ENOSPACE) that is set. Over NFS with an async mount, even clients with proper error checking will behave this way since the linux NFS client implementation will not propagate the server errors [the write syscalls immediately return success] until the file handle is closed. This leads to a situation where NFS clients send a continuous stream of WRITE rpcs which result in ERRNOSPACE -- but since the client isn't seeing this, the stream of writes continues at maximum network speed. When some space does appear, multiple writers will all attempt to claim it for their current write. For NFS, we may see dozens to hundreds of threads that do this. The real-world scenario of this is database backup tooling (in particular, github.com/mdkent/percona-xtrabackup) which may write large files (>1TiB) to NFS for safe keeping. Some temporary files are written, rewound, and read back -- all before closing the file handle (the temp file is actually unlinked, to trigger automatic deletion on close/crash.) An application like this operating on an async NFS mount will not see an error code until TiB have been written/read. The lockup was observed when running this database backup on large filesystems (64 TiB in this case) with a high number of block groups and no free space. Fragmentation is generally not a factor in this filesystem (~thousands of large files, mostly contiguous except for the parts written while the filesystem is at capacity.) Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/ext4/mballoc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 19108d6bb566..fd8464aadf00 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4974,6 +4974,7 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle, ext4_fsblk_t block = 0; unsigned int inquota = 0; unsigned int reserv_clstrs = 0; + int retries = 0; u64 seq; might_sleep(); @@ -5076,7 +5077,8 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle, ar->len = ac->ac_b_ex.fe_len; } } else { - if (ext4_mb_discard_preallocations_should_retry(sb, ac, &seq)) + if (++retries < 3 && + ext4_mb_discard_preallocations_should_retry(sb, ac, &seq)) goto repeat; /* * If block allocation fails then the pa allocated above -- 2.25.1
From: Jan Kara <jack@suse.cz> stable inclusion from stable-v5.10.146 commit c18383218c3102f8f9ba56fd9abed86ac80a69c3 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 613c5a85898d1cd44e68f28d65eccf64a8ace9cf upstream. Currently the Orlov inode allocator searches for free inodes for a directory only in flex block groups with at most inodes_per_group/16 more directory inodes than average per flex block group. However with growing size of flex block group this becomes unnecessarily strict. Scale allowed difference from average directory count per flex block group with flex block group size as we do with other metrics. Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Cc: stable@kernel.org Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/ Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/ext4/ialloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 875af329c43e..c53c9b132204 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -508,7 +508,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent, goto fallback; } - max_dirs = ndirs / ngroups + inodes_per_group / 16; + max_dirs = ndirs / ngroups + inodes_per_group*flex_size / 16; min_inodes = avefreei - inodes_per_group*flex_size / 4; if (min_inodes < 1) min_inodes = 1; -- 2.25.1
From: Mika Westerberg <mika.westerberg@linux.intel.com> stable inclusion from stable-v5.10.147 commit 53e6282dde62be35ed311a41bbdf2372aedc8430 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit db0746e3399ee87ee5f957880811da16faa89fb8 ] Maple Ridge is first discrete USB4 host controller from Intel. It comes with firmware based connection manager and the flows are similar as used in Intel Titan Ridge. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Stable-dep-of: 14c7d9052837 ("thunderbolt: Add support for Intel Maple Ridge single port controller") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/thunderbolt/icm.c | 11 +++++++++++ drivers/thunderbolt/nhi.h | 1 + 2 files changed, 12 insertions(+) diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c index 82c46b200c34..fa24ea8cae75 100644 --- a/drivers/thunderbolt/icm.c +++ b/drivers/thunderbolt/icm.c @@ -2300,6 +2300,17 @@ struct tb *icm_probe(struct tb_nhi *nhi) icm->rtd3_veto = icm_icl_rtd3_veto; tb->cm_ops = &icm_icl_ops; break; + + case PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_4C_NHI: + icm->is_supported = icm_tgl_is_supported; + icm->get_mode = icm_ar_get_mode; + icm->driver_ready = icm_tr_driver_ready; + icm->device_connected = icm_tr_device_connected; + icm->device_disconnected = icm_tr_device_disconnected; + icm->xdomain_connected = icm_tr_xdomain_connected; + icm->xdomain_disconnected = icm_tr_xdomain_disconnected; + tb->cm_ops = &icm_tr_ops; + break; } if (!icm->is_supported || !icm->is_supported(tb)) { diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h index 4e0861d75072..69770beca792 100644 --- a/drivers/thunderbolt/nhi.h +++ b/drivers/thunderbolt/nhi.h @@ -55,6 +55,7 @@ extern const struct tb_nhi_ops icl_nhi_ops; * need for the PCI quirk anymore as we will use ICM also on Apple * hardware. */ +#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_4C_NHI 0x1137 #define PCI_DEVICE_ID_INTEL_WIN_RIDGE_2C_NHI 0x157d #define PCI_DEVICE_ID_INTEL_WIN_RIDGE_2C_BRIDGE 0x157e #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_NHI 0x15bf -- 2.25.1
From: Gil Fine <gil.fine@intel.com> stable inclusion from stable-v5.10.147 commit b2ad53fbc0e16771f393cb14ca0aeb25101eae60 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 14c7d905283744809e6b82efae2f490660a11cda ] Add support for Maple Ridge discrete USB4 host controller from Intel which has a single USB4 port (versus the already supported dual port Maple Ridge USB4 host controller). Cc: stable@vger.kernel.org Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/thunderbolt/icm.c | 1 + drivers/thunderbolt/nhi.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c index fa24ea8cae75..b2fb3397310e 100644 --- a/drivers/thunderbolt/icm.c +++ b/drivers/thunderbolt/icm.c @@ -2301,6 +2301,7 @@ struct tb *icm_probe(struct tb_nhi *nhi) tb->cm_ops = &icm_icl_ops; break; + case PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_2C_NHI: case PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_4C_NHI: icm->is_supported = icm_tgl_is_supported; icm->get_mode = icm_ar_get_mode; diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h index 69770beca792..7ad6d3f0583b 100644 --- a/drivers/thunderbolt/nhi.h +++ b/drivers/thunderbolt/nhi.h @@ -55,6 +55,7 @@ extern const struct tb_nhi_ops icl_nhi_ops; * need for the PCI quirk anymore as we will use ICM also on Apple * hardware. */ +#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_2C_NHI 0x1134 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_4C_NHI 0x1137 #define PCI_DEVICE_ID_INTEL_WIN_RIDGE_2C_NHI 0x157d #define PCI_DEVICE_ID_INTEL_WIN_RIDGE_2C_BRIDGE 0x157e -- 2.25.1
From: Dmitry Osipenko <digetx@gmail.com> stable inclusion from stable-v5.10.147 commit ded9e8964d0020bad431d8f1a7cc9a776a9ff5dc category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 3a465f027a33cbd2af74f882ad41729583195e8f ] Use clk_bulk helpers to make code cleaner. Note that this patch changed the order in which clocks are enabled to make code look nicer, but this doesn't matter in terms of hardware. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210120003154.26749-2-digetx@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Stable-dep-of: f89e409402e2 ("ALSA: hda: Fix Nvidia dp infoframe") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/hda_tegra.c | 68 ++++++--------------------------------- 1 file changed, 9 insertions(+), 59 deletions(-) diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index 1e44e337986e..957a7a9aaab0 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -70,9 +70,8 @@ struct hda_tegra { struct azx chip; struct device *dev; - struct clk *hda_clk; - struct clk *hda2codec_2x_clk; - struct clk *hda2hdmi_clk; + struct clk_bulk_data clocks[3]; + unsigned int nclocks; void __iomem *regs; struct work_struct probe_work; }; @@ -113,36 +112,6 @@ static void hda_tegra_init(struct hda_tegra *hda) writel(v, hda->regs + HDA_IPFS_INTR_MASK); } -static int hda_tegra_enable_clocks(struct hda_tegra *data) -{ - int rc; - - rc = clk_prepare_enable(data->hda_clk); - if (rc) - return rc; - rc = clk_prepare_enable(data->hda2codec_2x_clk); - if (rc) - goto disable_hda; - rc = clk_prepare_enable(data->hda2hdmi_clk); - if (rc) - goto disable_codec_2x; - - return 0; - -disable_codec_2x: - clk_disable_unprepare(data->hda2codec_2x_clk); -disable_hda: - clk_disable_unprepare(data->hda_clk); - return rc; -} - -static void hda_tegra_disable_clocks(struct hda_tegra *data) -{ - clk_disable_unprepare(data->hda2hdmi_clk); - clk_disable_unprepare(data->hda2codec_2x_clk); - clk_disable_unprepare(data->hda_clk); -} - /* * power management */ @@ -186,7 +155,7 @@ static int __maybe_unused hda_tegra_runtime_suspend(struct device *dev) azx_stop_chip(chip); azx_enter_link_reset(chip); } - hda_tegra_disable_clocks(hda); + clk_bulk_disable_unprepare(hda->nclocks, hda->clocks); return 0; } @@ -198,7 +167,7 @@ static int __maybe_unused hda_tegra_runtime_resume(struct device *dev) struct hda_tegra *hda = container_of(chip, struct hda_tegra, chip); int rc; - rc = hda_tegra_enable_clocks(hda); + rc = clk_bulk_prepare_enable(hda->nclocks, hda->clocks); if (rc != 0) return rc; if (chip && chip->running) { @@ -268,29 +237,6 @@ static int hda_tegra_init_chip(struct azx *chip, struct platform_device *pdev) return 0; } -static int hda_tegra_init_clk(struct hda_tegra *hda) -{ - struct device *dev = hda->dev; - - hda->hda_clk = devm_clk_get(dev, "hda"); - if (IS_ERR(hda->hda_clk)) { - dev_err(dev, "failed to get hda clock\n"); - return PTR_ERR(hda->hda_clk); - } - hda->hda2codec_2x_clk = devm_clk_get(dev, "hda2codec_2x"); - if (IS_ERR(hda->hda2codec_2x_clk)) { - dev_err(dev, "failed to get hda2codec_2x clock\n"); - return PTR_ERR(hda->hda2codec_2x_clk); - } - hda->hda2hdmi_clk = devm_clk_get(dev, "hda2hdmi"); - if (IS_ERR(hda->hda2hdmi_clk)) { - dev_err(dev, "failed to get hda2hdmi clock\n"); - return PTR_ERR(hda->hda2hdmi_clk); - } - - return 0; -} - static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev) { struct hda_tegra *hda = container_of(chip, struct hda_tegra, chip); @@ -499,7 +445,11 @@ static int hda_tegra_probe(struct platform_device *pdev) return err; } - err = hda_tegra_init_clk(hda); + hda->clocks[hda->nclocks++].id = "hda"; + hda->clocks[hda->nclocks++].id = "hda2hdmi"; + hda->clocks[hda->nclocks++].id = "hda2codec_2x"; + + err = devm_clk_bulk_get(&pdev->dev, hda->nclocks, hda->clocks); if (err < 0) goto out_free; -- 2.25.1
From: Dmitry Osipenko <digetx@gmail.com> stable inclusion from stable-v5.10.147 commit c1256c531d6733bda3397e7428bcef2a9ad9dd1a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 87f0e46e7559beb6f1d1ff99f8f48b1b9d86db52 ] Reset hardware on RPM-resume in order to bring it into a predictable state. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210120003154.26749-3-digetx@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Stable-dep-of: f89e409402e2 ("ALSA: hda: Fix Nvidia dp infoframe") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/hda_tegra.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c index 957a7a9aaab0..17b06f7b69ee 100644 --- a/sound/pci/hda/hda_tegra.c +++ b/sound/pci/hda/hda_tegra.c @@ -17,6 +17,7 @@ #include <linux/moduleparam.h> #include <linux/mutex.h> #include <linux/of_device.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/time.h> #include <linux/string.h> @@ -70,6 +71,7 @@ struct hda_tegra { struct azx chip; struct device *dev; + struct reset_control *reset; struct clk_bulk_data clocks[3]; unsigned int nclocks; void __iomem *regs; @@ -167,6 +169,12 @@ static int __maybe_unused hda_tegra_runtime_resume(struct device *dev) struct hda_tegra *hda = container_of(chip, struct hda_tegra, chip); int rc; + if (!chip->running) { + rc = reset_control_assert(hda->reset); + if (rc) + return rc; + } + rc = clk_bulk_prepare_enable(hda->nclocks, hda->clocks); if (rc != 0) return rc; @@ -176,6 +184,12 @@ static int __maybe_unused hda_tegra_runtime_resume(struct device *dev) /* disable controller wake up event*/ azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) & ~STATESTS_INT_MASK); + } else { + usleep_range(10, 100); + + rc = reset_control_deassert(hda->reset); + if (rc) + return rc; } return 0; @@ -445,6 +459,12 @@ static int hda_tegra_probe(struct platform_device *pdev) return err; } + hda->reset = devm_reset_control_array_get_exclusive(&pdev->dev); + if (IS_ERR(hda->reset)) { + err = PTR_ERR(hda->reset); + goto out_free; + } + hda->clocks[hda->nclocks++].id = "hda"; hda->clocks[hda->nclocks++].id = "hda2hdmi"; hda->clocks[hda->nclocks++].id = "hda2codec_2x"; -- 2.25.1
From: Hui Wang <hui.wang@canonical.com> stable inclusion from stable-v5.10.147 commit 24070d32c6ecec3a008553ca56e6a03ffa2aee89 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 13046370c4d143b629adc1a51659a8a6497fbbe6 ] If the platform set the dyn_pcm_assign to true, it will call hdmi_find_pcm_slot() to find a pcm slot when hdmi/dp monitor is connected and need to create a pcm. So far only intel_hsw_common_init() and patch_nvhdmi() set the dyn_pcm_assign to true, here we let tgl platforms assign the pcm slot dynamically first, if the driver runs for a period of time and there is no regression reported, we could set no_fixed_assgin to true in the intel_hsw_common_init(), and then set it to true in the patch_nvhdmi(). This change comes from the discussion between Takashi and Kai Vehmanen. Please refer to: https://github.com/alsa-project/alsa-lib/pull/118 Suggested-and-reviewed-by: Takashi Iwai <tiwai@suse.de> Suggested-and-reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20210301111202.2684-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Stable-dep-of: f89e409402e2 ("ALSA: hda: Fix Nvidia dp infoframe") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_hdmi.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index e5e5ce70c626..658fdf6915f1 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -157,6 +157,7 @@ struct hdmi_spec { bool dyn_pin_out; bool dyn_pcm_assign; + bool dyn_pcm_no_legacy; bool intel_hsw_fixup; /* apply Intel platform-specific fixups */ /* * Non-generic VIA/NVIDIA specific @@ -1348,6 +1349,12 @@ static int hdmi_find_pcm_slot(struct hdmi_spec *spec, { int i; + /* on the new machines, try to assign the pcm slot dynamically, + * not use the preferred fixed map (legacy way) anymore. + */ + if (spec->dyn_pcm_no_legacy) + goto last_try; + /* * generic_hdmi_build_pcms() may allocate extra PCMs on some * platforms (with maximum of 'num_nids + dev_num - 1') @@ -1377,6 +1384,7 @@ static int hdmi_find_pcm_slot(struct hdmi_spec *spec, return i; } + last_try: /* the last try; check the empty slots in pins */ for (i = 0; i < spec->num_nids; i++) { if (!test_bit(i, &spec->pcm_bitmap)) @@ -3010,8 +3018,16 @@ static int patch_i915_tgl_hdmi(struct hda_codec *codec) * the index indicate the port number. */ static const int map[] = {0x4, 0x6, 0x8, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf}; + int ret; - return intel_hsw_common_init(codec, 0x02, map, ARRAY_SIZE(map)); + ret = intel_hsw_common_init(codec, 0x02, map, ARRAY_SIZE(map)); + if (!ret) { + struct hdmi_spec *spec = codec->spec; + + spec->dyn_pcm_no_legacy = true; + } + + return ret; } /* Intel Baytrail and Braswell; with eld notifier */ -- 2.25.1
From: Mohan Kumar <mkumard@nvidia.com> stable inclusion from stable-v5.10.147 commit 29d849c3de5775185bddfce7fd7c57b7c37c2e7d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit f89e409402e2aeb3bc3aa44d2b7a597959e4e6af ] Nvidia HDA HW expects infoframe data bytes order same for both HDMI and DP i.e infoframe data starts from 5th bytes offset. As dp infoframe structure has 4th byte as valid infoframe data, use hdmi infoframe structure for nvidia dp infoframe to match HW behvaior. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220913065818.13015-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_hdmi.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 658fdf6915f1..ccb10a2dfd56 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -158,6 +158,8 @@ struct hdmi_spec { bool dyn_pin_out; bool dyn_pcm_assign; bool dyn_pcm_no_legacy; + bool nv_dp_workaround; /* workaround DP audio infoframe for Nvidia */ + bool intel_hsw_fixup; /* apply Intel platform-specific fixups */ /* * Non-generic VIA/NVIDIA specific @@ -667,15 +669,24 @@ static void hdmi_pin_setup_infoframe(struct hda_codec *codec, int ca, int active_channels, int conn_type) { + struct hdmi_spec *spec = codec->spec; union audio_infoframe ai; memset(&ai, 0, sizeof(ai)); - if (conn_type == 0) { /* HDMI */ + if ((conn_type == 0) || /* HDMI */ + /* Nvidia DisplayPort: Nvidia HW expects same layout as HDMI */ + (conn_type == 1 && spec->nv_dp_workaround)) { struct hdmi_audio_infoframe *hdmi_ai = &ai.hdmi; - hdmi_ai->type = 0x84; - hdmi_ai->ver = 0x01; - hdmi_ai->len = 0x0a; + if (conn_type == 0) { /* HDMI */ + hdmi_ai->type = 0x84; + hdmi_ai->ver = 0x01; + hdmi_ai->len = 0x0a; + } else {/* Nvidia DP */ + hdmi_ai->type = 0x84; + hdmi_ai->ver = 0x1b; + hdmi_ai->len = 0x11 << 2; + } hdmi_ai->CC02_CT47 = active_channels - 1; hdmi_ai->CA = ca; hdmi_checksum_audio_infoframe(hdmi_ai); @@ -3526,6 +3537,7 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec) spec->pcm_playback.rates = SUPPORTED_RATES; spec->pcm_playback.maxbps = SUPPORTED_MAXBPS; spec->pcm_playback.formats = SUPPORTED_FORMATS; + spec->nv_dp_workaround = true; return 0; } @@ -3665,6 +3677,7 @@ static int patch_nvhdmi(struct hda_codec *codec) spec->chmap.ops.chmap_cea_alloc_validate_get_type = nvhdmi_chmap_cea_alloc_validate_get_type; spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate; + spec->nv_dp_workaround = true; codec->link_down_at_suspend = 1; @@ -3688,6 +3701,7 @@ static int patch_nvhdmi_legacy(struct hda_codec *codec) spec->chmap.ops.chmap_cea_alloc_validate_get_type = nvhdmi_chmap_cea_alloc_validate_get_type; spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate; + spec->nv_dp_workaround = true; codec->link_down_at_suspend = 1; @@ -3861,6 +3875,7 @@ static int patch_tegra_hdmi(struct hda_codec *codec) spec->chmap.ops.chmap_cea_alloc_validate_get_type = nvhdmi_chmap_cea_alloc_validate_get_type; spec->chmap.ops.chmap_validate = nvhdmi_chmap_validate; + spec->nv_dp_workaround = true; return 0; } -- 2.25.1
From: Filipe Manana <fdmanana@suse.com> stable inclusion from stable-v5.10.147 commit 6ac5b52e3f352f9cb270c89e6e1d4dadb564ddb8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit a362bb864b8db4861977d00bd2c3222503ccc34b ] Often when running generic/562 from fstests we can hang during unmount, resulting in a trace like this: Sep 07 11:52:00 debian9 unknown: run fstests generic/562 at 2022-09-07 11:52:00 Sep 07 11:55:32 debian9 kernel: INFO: task umount:49438 blocked for more than 120 seconds. Sep 07 11:55:32 debian9 kernel: Not tainted 6.0.0-rc2-btrfs-next-122 #1 Sep 07 11:55:32 debian9 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Sep 07 11:55:32 debian9 kernel: task:umount state:D stack: 0 pid:49438 ppid: 25683 flags:0x00004000 Sep 07 11:55:32 debian9 kernel: Call Trace: Sep 07 11:55:32 debian9 kernel: <TASK> Sep 07 11:55:32 debian9 kernel: __schedule+0x3c8/0xec0 Sep 07 11:55:32 debian9 kernel: ? rcu_read_lock_sched_held+0x12/0x70 Sep 07 11:55:32 debian9 kernel: schedule+0x5d/0xf0 Sep 07 11:55:32 debian9 kernel: schedule_timeout+0xf1/0x130 Sep 07 11:55:32 debian9 kernel: ? lock_release+0x224/0x4a0 Sep 07 11:55:32 debian9 kernel: ? lock_acquired+0x1a0/0x420 Sep 07 11:55:32 debian9 kernel: ? trace_hardirqs_on+0x2c/0xd0 Sep 07 11:55:32 debian9 kernel: __wait_for_common+0xac/0x200 Sep 07 11:55:32 debian9 kernel: ? usleep_range_state+0xb0/0xb0 Sep 07 11:55:32 debian9 kernel: __flush_work+0x26d/0x530 Sep 07 11:55:32 debian9 kernel: ? flush_workqueue_prep_pwqs+0x140/0x140 Sep 07 11:55:32 debian9 kernel: ? trace_clock_local+0xc/0x30 Sep 07 11:55:32 debian9 kernel: __cancel_work_timer+0x11f/0x1b0 Sep 07 11:55:32 debian9 kernel: ? close_ctree+0x12b/0x5b3 [btrfs] Sep 07 11:55:32 debian9 kernel: ? __trace_bputs+0x10b/0x170 Sep 07 11:55:32 debian9 kernel: close_ctree+0x152/0x5b3 [btrfs] Sep 07 11:55:32 debian9 kernel: ? evict_inodes+0x166/0x1c0 Sep 07 11:55:32 debian9 kernel: generic_shutdown_super+0x71/0x120 Sep 07 11:55:32 debian9 kernel: kill_anon_super+0x14/0x30 Sep 07 11:55:32 debian9 kernel: btrfs_kill_super+0x12/0x20 [btrfs] Sep 07 11:55:32 debian9 kernel: deactivate_locked_super+0x2e/0xa0 Sep 07 11:55:32 debian9 kernel: cleanup_mnt+0x100/0x160 Sep 07 11:55:32 debian9 kernel: task_work_run+0x59/0xa0 Sep 07 11:55:32 debian9 kernel: exit_to_user_mode_prepare+0x1a6/0x1b0 Sep 07 11:55:32 debian9 kernel: syscall_exit_to_user_mode+0x16/0x40 Sep 07 11:55:32 debian9 kernel: do_syscall_64+0x48/0x90 Sep 07 11:55:32 debian9 kernel: entry_SYSCALL_64_after_hwframe+0x63/0xcd Sep 07 11:55:32 debian9 kernel: RIP: 0033:0x7fcde59a57a7 Sep 07 11:55:32 debian9 kernel: RSP: 002b:00007ffe914217c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 Sep 07 11:55:32 debian9 kernel: RAX: 0000000000000000 RBX: 00007fcde5ae8264 RCX: 00007fcde59a57a7 Sep 07 11:55:32 debian9 kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000055b57556cdd0 Sep 07 11:55:32 debian9 kernel: RBP: 000055b57556cba0 R08: 0000000000000000 R09: 00007ffe91420570 Sep 07 11:55:32 debian9 kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 Sep 07 11:55:32 debian9 kernel: R13: 000055b57556cdd0 R14: 000055b57556ccb8 R15: 0000000000000000 Sep 07 11:55:32 debian9 kernel: </TASK> What happens is the following: 1) The cleaner kthread tries to start a transaction to delete an unused block group, but the metadata reservation can not be satisfied right away, so a reservation ticket is created and it starts the async metadata reclaim task (fs_info->async_reclaim_work); 2) Writeback for all the filler inodes with an i_size of 2K starts (generic/562 creates a lot of 2K files with the goal of filling metadata space). We try to create an inline extent for them, but we fail when trying to insert the inline extent with -ENOSPC (at cow_file_range_inline()) - since this is not critical, we fallback to non-inline mode (back to cow_file_range()), reserve extents, create extent maps and create the ordered extents; 3) An unmount starts, enters close_ctree(); 4) The async reclaim task is flushing stuff, entering the flush states one by one, until it reaches RUN_DELAYED_IPUTS. There it runs all current delayed iputs. After running the delayed iputs and before calling btrfs_wait_on_delayed_iputs(), one or more ordered extents complete, and btrfs_add_delayed_iput() is called for each one through btrfs_finish_ordered_io() -> btrfs_put_ordered_extent(). This results in bumping fs_info->nr_delayed_iputs from 0 to some positive value. So the async reclaim task blocks at btrfs_wait_on_delayed_iputs() waiting for fs_info->nr_delayed_iputs to become 0; 5) The current transaction is committed by the transaction kthread, we then start unpinning extents and end up calling btrfs_try_granting_tickets() through unpin_extent_range(), since we released some space. This results in satisfying the ticket created by the cleaner kthread at step 1, waking up the cleaner kthread; 6) At close_ctree() we ask the cleaner kthread to park; 7) The cleaner kthread starts the transaction, deletes the unused block group, and then calls kthread_should_park(), which returns true, so it parks. And at this point we have the delayed iputs added by the completion of the ordered extents still pending; 8) Then later at close_ctree(), when we call: cancel_work_sync(&fs_info->async_reclaim_work); We hang forever, since the cleaner was parked and no one else can run delayed iputs after that, while the reclaim task is waiting for the remaining delayed iputs to be completed. Fix this by waiting for all ordered extents to complete and running the delayed iputs before attempting to stop the async reclaim tasks. Note that we can not wait for ordered extents with btrfs_wait_ordered_roots() (or other similar functions) because that waits for the BTRFS_ORDERED_COMPLETE flag to be set on an ordered extent, but the delayed iput is added after that, when doing the final btrfs_put_ordered_extent(). So instead wait for the work queues used for executing ordered extent completion to be empty, which works because we do the final put on an ordered extent at btrfs_finish_ordered_io() (while we are in the unmount context). Fixes: d6fd0ae25c6495 ("Btrfs: fix missing delayed iputs on unmount") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/btrfs/disk-io.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 2c7e50980a70..f2abd8bfd4a0 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -4105,6 +4105,31 @@ void __cold close_ctree(struct btrfs_fs_info *fs_info) /* clear out the rbtree of defraggable inodes */ btrfs_cleanup_defrag_inodes(fs_info); + /* + * After we parked the cleaner kthread, ordered extents may have + * completed and created new delayed iputs. If one of the async reclaim + * tasks is running and in the RUN_DELAYED_IPUTS flush state, then we + * can hang forever trying to stop it, because if a delayed iput is + * added after it ran btrfs_run_delayed_iputs() and before it called + * btrfs_wait_on_delayed_iputs(), it will hang forever since there is + * no one else to run iputs. + * + * So wait for all ongoing ordered extents to complete and then run + * delayed iputs. This works because once we reach this point no one + * can either create new ordered extents nor create delayed iputs + * through some other means. + * + * Also note that btrfs_wait_ordered_roots() is not safe here, because + * it waits for BTRFS_ORDERED_COMPLETE to be set on an ordered extent, + * but the delayed iput for the respective inode is made only when doing + * the final btrfs_put_ordered_extent() (which must happen at + * btrfs_finish_ordered_io() when we are unmounting). + */ + btrfs_flush_workqueue(fs_info->endio_write_workers); + /* Ordered extents for free space inodes. */ + btrfs_flush_workqueue(fs_info->endio_freespace_worker); + btrfs_run_delayed_iputs(fs_info); + cancel_work_sync(&fs_info->async_reclaim_work); cancel_work_sync(&fs_info->async_data_reclaim_work); -- 2.25.1
From: Hongling Zeng <zenghongling@kylinos.cn> stable inclusion from stable-v5.10.147 commit 1e4b856fc0bba4cebea5a7ab3ed2de52bcaf91cb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit a625a4b8806cc1e928b7dd2cca1fee709c9de56e upstream. The UAS mode of Hiksemi is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kyl... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 23ab3b048d9b..c967b3b62dce 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -52,6 +52,13 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME), +/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */ +UNUSUAL_DEV(0x090c, 0x2000, 0x0000, 0x9999, + "Hiksemi", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI * commands in UAS mode. Observed with the 1.28 firmware; are there others? -- 2.25.1
From: Hongling Zeng <zenghongling@kylinos.cn> stable inclusion from stable-v5.10.147 commit 5f91ceea6c146ea78c25a45fefa0b361410b1f99 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit e00b488e813f0f1ad9f778e771b7cd2fe2877023 upstream. The UAS mode of Hiksemi USB_HDD is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kyl... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index c967b3b62dce..e5960b29f902 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -83,6 +83,13 @@ UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_REPORT_LUNS), +/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */ +UNUSUAL_DEV(0x0bda, 0x9210, 0x0000, 0x9999, + "Hiksemi", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */ UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999, "Initio Corporation", -- 2.25.1
From: Hongling Zeng <zenghongling@kylinos.cn> stable inclusion from stable-v5.10.147 commit e5ee7b77ac9b1fe459eba7a389b80b1feb527334 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 0fb9703a3eade0bb84c635705d9c795345e55053 upstream. The UAS mode of Thinkplus(0x17ef, 0x3899) is reported to influence performance and trigger kernel panic on several platforms with the following error message: [ 39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000 1b000000 05038000 [ 720.545894][13] Workqueue: usb_hub_wq hub_event [ 720.550971][13] ffff88026c143c38 0000000000016300 ffff8802755bb900 ffff880 26cb80000 [ 720.559673][13] ffff88026c144000 ffff88026ca88100 0000000000000000 ffff880 26cb80000 [ 720.568374][13] ffff88026cb80000 ffff88026c143c50 ffffffff8186ae25 ffff880 26ca880f8 [ 720.577076][13] Call Trace: [ 720.580201][13] [<ffffffff8186ae25>] schedule+0x35/0x80 [ 720.586137][13] [<ffffffff8186b0ce>] schedule_preempt_disabled+0xe/0x10 [ 720.593623][13] [<ffffffff8186cb94>] __mutex_lock_slowpath+0x164/0x1e0 [ 720.601012][13] [<ffffffff8186cc3f>] mutex_lock+0x2f/0x40 [ 720.607141][13] [<ffffffff8162b8e9>] usb_disconnect+0x59/0x290 Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663902249837086.19.seg@mailgw Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index e5960b29f902..251778d14e2d 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -132,6 +132,13 @@ UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */ +UNUSUAL_DEV(0x17ef, 0x3899, 0x0000, 0x9999, + "Thinkplus", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: Hans de Goede <hdegoede@redhat.com> */ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, "VIA", -- 2.25.1
From: Heikki Krogerus <heikki.krogerus@linux.intel.com> stable inclusion from stable-v5.10.147 commit efdff533946284ed013f8e062be66e57463304bf category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 415ba26cb73f7d22a892043301b91b57ae54db02 upstream. Sink only devices do not have any source capabilities, so the driver should not warn about that. Also DRP (Dual Role Power) capable devices, such as USB Type-C docking stations, do not return any source capabilities unless they are plugged to a power supply themselves. Fixes: 1f4642b72be7 ("usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220922145924.80667-1-heikki.krogerus@linux.intel... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/typec/ucsi/ucsi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index 0c16e9980736..4cd5c291cdf3 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -515,8 +515,6 @@ static int ucsi_get_pdos(struct ucsi_connector *con, int is_partner, num_pdos * sizeof(u32)); if (ret < 0) dev_err(ucsi->dev, "UCSI_GET_PDOS failed (%d)\n", ret); - if (ret == 0 && offset == 0) - dev_warn(ucsi->dev, "UCSI_GET_PDOS returned 0 bytes\n"); return ret; } -- 2.25.1
From: Mario Limonciello <mario.limonciello@amd.com> stable inclusion from stable-v5.10.147 commit 0695e590de3c0ccec993430458728e748c27eb30 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 31f87f705b3c1635345d8e8a493697099b43e508 upstream. If any software has interacted with the USB4 registers before the Linux USB4 CM runs, it may have modified the plug events delay. It has been observed that if this value too large, it's possible that hotplugged devices will negotiate a fallback mode instead in Linux. To prevent this, explicitly align the plug events delay with the USB4 spec value of 10ms. Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/thunderbolt/switch.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index c4b157c29af7..65f99d744654 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -2046,6 +2046,7 @@ int tb_switch_configure(struct tb_switch *sw) * additional capabilities. */ sw->config.cmuv = USB4_VERSION_1_0; + sw->config.plug_events_delay = 0xa; /* Enumerate the switch */ ret = tb_sw_write(sw, (u32 *)&sw->config + 1, TB_CFG_SWITCH, -- 2.25.1
From: Frank Wunderlich <frank-w@public-files.de> stable inclusion from stable-v5.10.147 commit 8cf377baf0c32eca34bd8bda4798f1e934fe199f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 797666cd5af041ffb66642fff62f7389f08566a2 upstream. Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Cc: stable@vger.kernel.org Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220926150740.6684-3-linux@fw-web.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 1502069f3a4e..a1c9233e264d 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1332,6 +1332,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81b3, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */ {QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */ {QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */ + {QMI_FIXED_INTF(0x413c, 0x81c2, 8)}, /* Dell Wireless 5811e */ {QMI_FIXED_INTF(0x413c, 0x81cc, 8)}, /* Dell Wireless 5816e */ {QMI_FIXED_INTF(0x413c, 0x81d7, 0)}, /* Dell Wireless 5821e */ {QMI_FIXED_INTF(0x413c, 0x81d7, 1)}, /* Dell Wireless 5821e preproduction config */ -- 2.25.1
From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> stable inclusion from stable-v5.10.147 commit 6c5742372b2d5d36de129439e26eda05aab54652 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit e62563db857f81d75c5726a35bc0180bed6d1540 upstream. Both i.MX6 and i.MX8 reference manuals list 0xBF8 as SNVS_HPVIDR1 (chapters 57.9 and 6.4.5 respectively). Without this, trying to read the revision number results in 0 on all revisions, causing the i.MX6 quirk to apply on all platforms, which in turn causes the driver to synthesise power button release events instead of passing the real one as they happen even on platforms like i.MX8 where that's not wanted. Fixes: 1a26c920717a ("Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q") Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/4599101.ElGaqSPkdT@pliszka Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/input/keyboard/snvs_pwrkey.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c index 65286762b02a..ad8660be0127 100644 --- a/drivers/input/keyboard/snvs_pwrkey.c +++ b/drivers/input/keyboard/snvs_pwrkey.c @@ -20,7 +20,7 @@ #include <linux/mfd/syscon.h> #include <linux/regmap.h> -#define SNVS_HPVIDR1_REG 0xF8 +#define SNVS_HPVIDR1_REG 0xBF8 #define SNVS_LPSR_REG 0x4C /* LP Status Register */ #define SNVS_LPCR_REG 0x38 /* LP Control Register */ #define SNVS_HPSR_REG 0x14 -- 2.25.1
From: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> stable inclusion from stable-v5.10.147 commit dab144c5dd075cfeba3c8ad1e975b30bfd22f0c9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 6726d552a6912e88cf63fe2bda87b2efa0efc7d0 upstream. Access to registers is guarded by ingenic_tcu_{enable,disable}_regs() so the stop bit can be cleared before accessing a timer channel, but those functions did not clear the stop bit on SoCs with a global TCU clock gate. Testing on the X1000 has revealed that the stop bits must be cleared _and_ the global TCU clock must be ungated to access timer registers. This appears to be the norm on Ingenic SoCs, and is specified in the documentation for the X1000 and numerous JZ47xx SoCs. If the stop bit isn't cleared, register writes don't take effect and the system can be left in a broken state, eg. the watchdog timer may not run. The bug probably went unnoticed because stop bits are zeroed when the SoC is reset, and the kernel does not set them unless a timer gets disabled at runtime. However, it is possible that a bootloader or a previous kernel (if using kexec) leaves the stop bits set and we should not rely on them being cleared. Fixing this is easy: have ingenic_tcu_{enable,disable}_regs() always clear the stop bit, regardless of the presence of a global TCU gate. Reviewed-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Paul Cercueil <paul@crapouillou.net> Fixes: 4f89e4b8f121 ("clk: ingenic: Add driver for the TCU clocks") Cc: stable@vger.kernel.org Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220617122254.738900-1-aidanmacdonald.0x0@gmail.c... Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/ingenic/tcu.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c index 9382dc3aa27e..1999c114f465 100644 --- a/drivers/clk/ingenic/tcu.c +++ b/drivers/clk/ingenic/tcu.c @@ -100,15 +100,11 @@ static bool ingenic_tcu_enable_regs(struct clk_hw *hw) bool enabled = false; /* - * If the SoC has no global TCU clock, we must ungate the channel's - * clock to be able to access its registers. - * If we have a TCU clock, it will be enabled automatically as it has - * been attached to the regmap. + * According to the programming manual, a timer channel's registers can + * only be accessed when the channel's stop bit is clear. */ - if (!tcu->clk) { - enabled = !!ingenic_tcu_is_enabled(hw); - regmap_write(tcu->map, TCU_REG_TSCR, BIT(info->gate_bit)); - } + enabled = !!ingenic_tcu_is_enabled(hw); + regmap_write(tcu->map, TCU_REG_TSCR, BIT(info->gate_bit)); return enabled; } @@ -119,8 +115,7 @@ static void ingenic_tcu_disable_regs(struct clk_hw *hw) const struct ingenic_tcu_clk_info *info = tcu_clk->info; struct ingenic_tcu *tcu = tcu_clk->tcu; - if (!tcu->clk) - regmap_write(tcu->map, TCU_REG_TSSR, BIT(info->gate_bit)); + regmap_write(tcu->map, TCU_REG_TSSR, BIT(info->gate_bit)); } static u8 ingenic_tcu_get_parent(struct clk_hw *hw) -- 2.25.1
From: Linus Walleij <linus.walleij@linaro.org> stable inclusion from stable-v5.10.147 commit 1d71422bd4837a6a880a32bc03299ed04caaff83 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 4952aa696a9f221c5e34e5961e02fca41ef67ad6 upstream. The DT parser is dependent on the PCI device being tagged as device_type = "pci" in order to parse memory ranges properly. Fix this up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220919092608.813511-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm/boot/dts/integratorap.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 67d1f9b24a52..8600c0548525 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -153,6 +153,7 @@ pic: pic@14000000 { pci: pciv3@62000000 { compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; -- 2.25.1
From: ChenXiaoSong <chenxiaosong2@huawei.com> stable inclusion from stable-v5.10.147 commit a48daecd0994d9d5dc512302412880fe0f5613f4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 1b513f613731e2afc05550e8070d79fac80c661e upstream. Syzkaller reported BUG_ON as follows: ------------[ cut here ]------------ kernel BUG at fs/ntfs/dir.c:86! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 758 Comm: a.out Not tainted 5.19.0-next-20220808 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:ntfs_lookup_inode_by_name+0xd11/0x2d10 Code: ff e9 b9 01 00 00 e8 1e fe d6 fe 48 8b 7d 98 49 8d 5d 07 e8 91 85 29 ff 48 c7 45 98 00 00 00 00 e9 5a fb ff ff e8 ff fd d6 fe <0f> 0b e8 f8 fd d6 fe 0f 0b e8 f1 fd d6 fe 48 8b b5 50 ff ff ff 4c RSP: 0018:ffff888079607978 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000008000 RCX: 0000000000000000 RDX: ffff88807cf10000 RSI: ffffffff82a4a081 RDI: 0000000000000003 RBP: ffff888079607a70 R08: 0000000000000001 R09: ffff88807a6d01d7 R10: ffffed100f4da03a R11: 0000000000000000 R12: ffff88800f0fb110 R13: ffff88800f0ee000 R14: ffff88800f0fb000 R15: 0000000000000001 FS: 00007f33b63c7540(0000) GS:ffff888108580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f33b635c090 CR3: 000000000f39e005 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> load_system_files+0x1f7f/0x3620 ntfs_fill_super+0xa01/0x1be0 mount_bdev+0x36a/0x440 ntfs_mount+0x3a/0x50 legacy_get_tree+0xfb/0x210 vfs_get_tree+0x8f/0x2f0 do_new_mount+0x30a/0x760 path_mount+0x4de/0x1880 __x64_sys_mount+0x2b3/0x340 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f33b62ff9ea Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd0c471aa8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f33b62ff9ea RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffd0c471be0 RBP: 00007ffd0c471c60 R08: 00007ffd0c471ae0 R09: 00007ffd0c471c24 R10: 0000000000000000 R11: 0000000000000202 R12: 000055bac5afc160 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fix this by adding sanity check on extended system files' directory inode to ensure that it is directory, just like ntfs_extend_init() when mounting ntfs3. Link: https://lkml.kernel.org/r/20220809064730.2316892-1-chenxiaosong2@huawei.com Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/ntfs/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c index 0d7e948cb29c..7f69422d5191 100644 --- a/fs/ntfs/super.c +++ b/fs/ntfs/super.c @@ -2092,7 +2092,8 @@ static bool load_system_files(ntfs_volume *vol) // TODO: Initialize security. /* Get the extended system files' directory inode. */ vol->extend_ino = ntfs_iget(sb, FILE_Extend); - if (IS_ERR(vol->extend_ino) || is_bad_inode(vol->extend_ino)) { + if (IS_ERR(vol->extend_ino) || is_bad_inode(vol->extend_ino) || + !S_ISDIR(vol->extend_ino->i_mode)) { if (!IS_ERR(vol->extend_ino)) iput(vol->extend_ino); ntfs_error(sb, "Failed to load $Extend."); -- 2.25.1
From: Alexander Couzens <lynxis@fe80.eu> stable inclusion from stable-v5.10.147 commit e72a435fa30cd96a917ce2be112a4ea0a536aeca category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 42bc4fafe359ed6b73602b7a2dba0dd99588f8ce upstream. Move the PLL init of the switch out of the pad configuration of the port 6 (usally cpu port). Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for outbound traffic on port 5 or port 6. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Cc: stable@vger.kernel.org Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/dsa/mt7530.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 265620a81f9f..70155e996f7d 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -502,14 +502,19 @@ static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) static int mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) { - struct mt7530_priv *priv = ds->priv; + return 0; +} + +static void +mt7531_pll_setup(struct mt7530_priv *priv) +{ u32 top_sig; u32 hwstrap; u32 xtal; u32 val; if (mt7531_dual_sgmii_supported(priv)) - return 0; + return; val = mt7530_read(priv, MT7531_CREV); top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); @@ -588,8 +593,6 @@ mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) val |= EN_COREPLL; mt7530_write(priv, MT7531_PLLGP_EN, val); usleep_range(25, 35); - - return 0; } static void @@ -1731,6 +1734,8 @@ mt7531_setup(struct dsa_switch *ds) SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); + mt7531_pll_setup(priv); + if (mt7531_dual_sgmii_supported(priv)) { priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; @@ -2281,8 +2286,6 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port) case 6: interface = PHY_INTERFACE_MODE_2500BASEX; - mt7531_pad_setup(ds, interface); - priv->p6_interface = interface; break; default: -- 2.25.1
From: Niklas Cassel <niklas.cassel@wdc.com> stable inclusion from stable-v5.10.147 commit 02d55a837e1ae2d59955dbe8dbc9b6ff8d5cf7c9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit ea08aec7e77bfd6599489ec430f9f859ab84575a upstream. Commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") added an explicit entry for AMD Green Sardine AHCI controller using the board_ahci_mobile configuration (this configuration has later been renamed to board_ahci_low_power). The board_ahci_low_power configuration enables support for low power modes. This explicit entry takes precedence over the generic AHCI controller entry, which does not enable support for low power modes. Therefore, when commit 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") was backported to stable kernels, it make some Pioneer optical drives, which was working perfectly fine before the commit was backported, stop working. The real problem is that the Pioneer optical drives do not handle low power modes correctly. If these optical drives would have been tested on another AHCI controller using the board_ahci_low_power configuration, this issue would have been detected earlier. Unfortunately, the board_ahci_low_power configuration is only used in less than 15% of the total AHCI controller entries, so many devices have never been tested with an AHCI controller with low power modes. Fixes: 1527f69204fe ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile") Cc: stable@vger.kernel.org Reported-by: Jaap Berkhout <j.j.berkhout@staalenberk.nl> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/ata/libata-core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2402fa4d8aa5..d13474c6d181 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3936,6 +3936,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, + /* These specific Pioneer models have LPM issues */ + { "PIONEER BD-RW BDR-207M", NULL, ATA_HORKAGE_NOLPM }, + { "PIONEER BD-RW BDR-205", NULL, ATA_HORKAGE_NOLPM }, + /* Crucial BX100 SSD 500GB has broken LPM support */ { "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM }, -- 2.25.1
From: Sergei Antonov <saproj@gmail.com> stable inclusion from stable-v5.10.147 commit 36b10cde0c440ccd57ad3c99f6279f38f35705a5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 35ca91d1338ae158f6dcc0de5d1e86197924ffda upstream. According to the datasheet [1] at page 377, 4-bit bus width is turned on by bit 2 of the Bus Width Register. Thus the current bitmask is wrong: define BUS_WIDTH_4 BIT(1) BIT(1) does not work but BIT(2) works. This has been verified on real MOXA hardware with FTSDC010 controller revision 1_6_0. The corrected value of BUS_WIDTH_4 mask collides with: define BUS_WIDTH_8 BIT(2). Additionally, 8-bit bus width mode isn't supported according to the datasheet, so let's remove the corresponding code. [1] https://bitbucket.org/Kasreyn/mkrom-uc7112lx/src/master/documents/FIC8120_DS... Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220907205753.1577434-1-saproj@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/mmc/host/moxart-mmc.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c index ea67a7ef2390..c16300b92139 100644 --- a/drivers/mmc/host/moxart-mmc.c +++ b/drivers/mmc/host/moxart-mmc.c @@ -111,8 +111,8 @@ #define CLK_DIV_MASK 0x7f /* REG_BUS_WIDTH */ -#define BUS_WIDTH_8 BIT(2) -#define BUS_WIDTH_4 BIT(1) +#define BUS_WIDTH_4_SUPPORT BIT(3) +#define BUS_WIDTH_4 BIT(2) #define BUS_WIDTH_1 BIT(0) #define MMC_VDD_360 23 @@ -527,9 +527,6 @@ static void moxart_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_BUS_WIDTH_4: writel(BUS_WIDTH_4, host->base + REG_BUS_WIDTH); break; - case MMC_BUS_WIDTH_8: - writel(BUS_WIDTH_8, host->base + REG_BUS_WIDTH); - break; default: writel(BUS_WIDTH_1, host->base + REG_BUS_WIDTH); break; @@ -654,16 +651,8 @@ static int moxart_probe(struct platform_device *pdev) dmaengine_slave_config(host->dma_chan_rx, &cfg); } - switch ((readl(host->base + REG_BUS_WIDTH) >> 3) & 3) { - case 1: + if (readl(host->base + REG_BUS_WIDTH) & BUS_WIDTH_4_SUPPORT) mmc->caps |= MMC_CAP_4_BIT_DATA; - break; - case 2: - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; - break; - default: - break; - } writel(0, host->base + REG_INTERRUPT_MASK); -- 2.25.1
From: Wenchao Chen <wenchao.chen@unisoc.com> stable inclusion from stable-v5.10.147 commit 9b751b4dc350a5ba836fb33518da1daac5b4a205 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit e7afa79a3b35a27a046a2139f8b20bd6b98155c2 upstream. The block device uses multiple queues to access emmc. There will be up to 3 requests in the hsq of the host. The current code will check whether there is a request doing recovery before entering the queue, but it will not check whether there is a request when the lock is issued. The request is in recovery mode. If there is a request in recovery, then a read and write request is initiated at this time, and the conflict between the request and the recovery request will cause the data to be trampled. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Fixes: 511ce378e16f ("mmc: Add MMC host software queue support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220916090506.10662-1-wenchao.chen666@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/mmc/host/mmc_hsq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/mmc_hsq.c b/drivers/mmc/host/mmc_hsq.c index a5e05ed0fda3..9d35453e7371 100644 --- a/drivers/mmc/host/mmc_hsq.c +++ b/drivers/mmc/host/mmc_hsq.c @@ -34,7 +34,7 @@ static void mmc_hsq_pump_requests(struct mmc_hsq *hsq) spin_lock_irqsave(&hsq->lock, flags); /* Make sure we are not already running a request now */ - if (hsq->mrq) { + if (hsq->mrq || hsq->recovery_halt) { spin_unlock_irqrestore(&hsq->lock, flags); return; } -- 2.25.1
From: Mel Gorman <mgorman@techsingularity.net> stable inclusion from stable-v5.10.147 commit 466a26af2d105666a427e4892b2be67cfcc55f4f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 3d36424b3b5850bd92f3e89b953a430d7cfc88ef upstream. Patrick Daly reported the following problem; NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - before offline operation [0] - ZONE_MOVABLE [1] - ZONE_NORMAL [2] - NULL For a GFP_KERNEL allocation, alloc_pages_slowpath() will save the offset of ZONE_NORMAL in ac->preferred_zoneref. If a concurrent memory_offline operation removes the last page from ZONE_MOVABLE, build_all_zonelists() & build_zonerefs_node() will update node_zonelists as shown below. Only populated zones are added. NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - after offline operation [0] - ZONE_NORMAL [1] - NULL [2] - NULL The race is simple -- page allocation could be in progress when a memory hot-remove operation triggers a zonelist rebuild that removes zones. The allocation request will still have a valid ac->preferred_zoneref that is now pointing to NULL and triggers an OOM kill. This problem probably always existed but may be slightly easier to trigger due to 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator") which distinguishes between zones that are completely unpopulated versus zones that have valid pages not managed by the buddy allocator (e.g. reserved, memblock, ballooning etc). Memory hotplug had multiple stages with timing considerations around managed/present page updates, the zonelist rebuild and the zone span updates. As David Hildenbrand puts it memory offlining adjusts managed+present pages of the zone essentially in one go. If after the adjustments, the zone is no longer populated (present==0), we rebuild the zone lists. Once that's done, we try shrinking the zone (start+spanned pages) -- which results in zone_start_pfn == 0 if there are no more pages. That happens *after* rebuilding the zonelists via remove_pfn_range_from_zone(). The only requirement to fix the race is that a page allocation request identifies when a zonelist rebuild has happened since the allocation request started and no page has yet been allocated. Use a seqlock_t to track zonelist updates with a lockless read-side of the zonelist and protecting the rebuild and update of the counter with a spinlock. [akpm@linux-foundation.org: make zonelist_update_seq static] Link: https://lkml.kernel.org/r/20220824110900.vh674ltxmzb3proq@techsingularity.ne... Fixes: 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Patrick Daly <quic_pdaly@quicinc.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- mm/page_alloc.c | 53 +++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 43 insertions(+), 10 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index e1d690370270..9c6ceec21acd 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4383,6 +4383,30 @@ void fs_reclaim_release(gfp_t gfp_mask) EXPORT_SYMBOL_GPL(fs_reclaim_release); #endif +/* + * Zonelists may change due to hotplug during allocation. Detect when zonelists + * have been rebuilt so allocation retries. Reader side does not lock and + * retries the allocation if zonelist changes. Writer side is protected by the + * embedded spin_lock. + */ +static DEFINE_SEQLOCK(zonelist_update_seq); + +static unsigned int zonelist_iter_begin(void) +{ + if (IS_ENABLED(CONFIG_MEMORY_HOTREMOVE)) + return read_seqbegin(&zonelist_update_seq); + + return 0; +} + +static unsigned int check_retry_zonelist(unsigned int seq) +{ + if (IS_ENABLED(CONFIG_MEMORY_HOTREMOVE)) + return read_seqretry(&zonelist_update_seq, seq); + + return seq; +} + /* Perform direct synchronous page reclaim */ static unsigned long __perform_reclaim(gfp_t gfp_mask, unsigned int order, @@ -4736,6 +4760,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, int compaction_retries; int no_progress_loops; unsigned int cpuset_mems_cookie; + unsigned int zonelist_iter_cookie; int reserve_flags; /* @@ -4746,11 +4771,12 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, (__GFP_ATOMIC|__GFP_DIRECT_RECLAIM))) gfp_mask &= ~__GFP_ATOMIC; -retry_cpuset: +restart: compaction_retries = 0; no_progress_loops = 0; compact_priority = DEF_COMPACT_PRIORITY; cpuset_mems_cookie = read_mems_allowed_begin(); + zonelist_iter_cookie = zonelist_iter_begin(); /* * The fast path uses conservative alloc_flags to succeed only until @@ -4913,9 +4939,13 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, goto retry; - /* Deal with possible cpuset update races before we start OOM killing */ - if (check_retry_cpuset(cpuset_mems_cookie, ac)) - goto retry_cpuset; + /* + * Deal with possible cpuset update races or zonelist updates to avoid + * a unnecessary OOM kill. + */ + if (check_retry_cpuset(cpuset_mems_cookie, ac) || + check_retry_zonelist(zonelist_iter_cookie)) + goto restart; /* Reclaim has failed us, start killing things */ page = __alloc_pages_may_oom(gfp_mask, order, ac, &did_some_progress); @@ -4935,9 +4965,13 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, } nopage: - /* Deal with possible cpuset update races before we fail */ - if (check_retry_cpuset(cpuset_mems_cookie, ac)) - goto retry_cpuset; + /* + * Deal with possible cpuset update races or zonelist updates to avoid + * a unnecessary OOM kill. + */ + if (check_retry_cpuset(cpuset_mems_cookie, ac) || + check_retry_zonelist(zonelist_iter_cookie)) + goto restart; /* * Make sure that __GFP_NOFAIL request doesn't leak out and make sure @@ -6345,9 +6379,8 @@ static void __build_all_zonelists(void *data) int nid; int __maybe_unused cpu; pg_data_t *self = data; - static DEFINE_SPINLOCK(lock); - spin_lock(&lock); + write_seqlock(&zonelist_update_seq); #ifdef CONFIG_NUMA memset(node_load, 0, sizeof(node_load)); @@ -6380,7 +6413,7 @@ static void __build_all_zonelists(void *data) #endif } - spin_unlock(&lock); + write_sequnlock(&zonelist_update_seq); } static noinline void __init -- 2.25.1
From: Maurizio Lombardi <mlombard@redhat.com> stable inclusion from stable-v5.10.147 commit a54fc536911371bd5863afdcb2418ab948484b75 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit dac22531bbd4af2426c4e29e05594415ccfa365d upstream. A number of drivers call page_frag_alloc() with a fragment's size > PAGE_SIZE. In low memory conditions, __page_frag_cache_refill() may fail the order 3 cache allocation and fall back to order 0; In this case, the cache will be smaller than the fragment, causing memory corruptions. Prevent this from happening by checking if the newly allocated cache is large enough for the fragment; if not, the allocation will fail and page_frag_alloc() will return NULL. Link: https://lkml.kernel.org/r/20220715125013.247085-1-mlombard@redhat.com Fixes: b63ae8ca096d ("mm/net: Rename and move page fragment handling from net/ to mm/") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Cc: Chen Lin <chen45464546@163.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- mm/page_alloc.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 9c6ceec21acd..992f35f566c8 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5567,6 +5567,18 @@ void *page_frag_alloc(struct page_frag_cache *nc, /* reset page count bias and offset to start of new frag */ nc->pagecnt_bias = PAGE_FRAG_CACHE_MAX_SIZE + 1; offset = size - fragsz; + if (unlikely(offset < 0)) { + /* + * The caller is trying to allocate a fragment + * with fragsz > PAGE_SIZE but the cache isn't big + * enough to satisfy the request, this may + * happen in low memory conditions. + * We don't release the cache page because + * it could make memory pressure worse + * so we simply return NULL here. + */ + return NULL; + } } nc->pagecnt_bias--; -- 2.25.1
From: Alistair Popple <apopple@nvidia.com> stable inclusion from stable-v5.10.147 commit 1002d5fef406c8dc685679aedb16938ad57d968c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 60bae73708963de4a17231077285bd9ff2f41c44 upstream. When clearing a PTE the TLB should be flushed whilst still holding the PTL to avoid a potential race with madvise/munmap/etc. For example consider the following sequence: CPU0 CPU1 ---- ---- migrate_vma_collect_pmd() pte_unmap_unlock() madvise(MADV_DONTNEED) -> zap_pte_range() pte_offset_map_lock() [ PTE not present, TLB not flushed ] pte_unmap_unlock() [ page is still accessible via stale TLB ] flush_tlb_range() In this case the page may still be accessed via the stale TLB entry after madvise returns. Fix this by flushing the TLB while holding the PTL. Fixes: 8c3328f1f36a ("mm/migrate: migrate_vma() unmap page from vma while collecting pages") Link: https://lkml.kernel.org/r/9f801e9d8d830408f2ca27821f606e09aa856899.166207852... Signed-off-by: Alistair Popple <apopple@nvidia.com> Reported-by: Nadav Amit <nadav.amit@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: huang ying <huang.ying.caritas@gmail.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- mm/migrate.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/migrate.c b/mm/migrate.c index b3c47cc9b622..6d4eb4d04ba1 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -2471,13 +2471,14 @@ static int migrate_vma_collect_pmd(pmd_t *pmdp, migrate->dst[migrate->npages] = 0; migrate->src[migrate->npages++] = mpfn; } - arch_leave_lazy_mmu_mode(); - pte_unmap_unlock(ptep - 1, ptl); /* Only flush the TLB if we actually modified any entries */ if (unmapped) flush_tlb_range(walk->vma, start, end); + arch_leave_lazy_mmu_mode(); + pte_unmap_unlock(ptep - 1, ptl); + return 0; } -- 2.25.1
From: Minchan Kim <minchan@kernel.org> stable inclusion from stable-v5.10.147 commit be2cd261ca510be5cb51b198c602c516207dd32b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 58d426a7ba92870d489686dfdb9d06b66815a2ab upstream. MADV_PAGEOUT tries to isolate non-LRU pages and gets a warning from isolate_lru_page below. Fix it by checking PageLRU in advance. ------------[ cut here ]------------ trying to isolate tail page WARNING: CPU: 0 PID: 6175 at mm/folio-compat.c:158 isolate_lru_page+0x130/0x140 Modules linked in: CPU: 0 PID: 6175 Comm: syz-executor.0 Not tainted 5.18.12 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:isolate_lru_page+0x130/0x140 Link: https://lore.kernel.org/linux-mm/485f8c33.2471b.182d5726afb.Coremail.hantian... Link: https://lkml.kernel.org/r/20220908151204.762596-1-minchan@kernel.org Fixes: 1a4e58cce84e ("mm: introduce MADV_PAGEOUT") Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: 韩天ç` <hantianshuo@iie.ac.cn> Suggested-by: Yang Shi <shy828301@gmail.com> Acked-by: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- mm/madvise.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/mm/madvise.c b/mm/madvise.c index 1af2e4377bbc..0a1d6f9d75ea 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -443,8 +443,11 @@ static int madvise_cold_or_pageout_pte_range(pmd_t *pmd, continue; } - /* Do not interfere with other mappings of this page */ - if (page_mapcount(page) != 1) + /* + * Do not interfere with other mappings of this page and + * non-LRU page. + */ + if (!PageLRU(page) || page_mapcount(page) != 1) continue; VM_BUG_ON_PAGE(PageTransCompound(page), page); -- 2.25.1
From: Hangyu Hua <hbh25y@gmail.com> stable inclusion from stable-v5.10.147 commit ac828e2416911b27e78663c32a8c168a40549103 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 37238699073e7e93f05517e529661151173cd458 upstream. vb2_core_qbuf and vb2_core_querybuf don't check the range of b->index controlled by the user. Fix this by adding range checking code before using them. Fixes: 57868acc369a ("media: videobuf2: Add new uAPI for DVB streaming I/O") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/media/dvb-core/dvb_vb2.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/media/dvb-core/dvb_vb2.c b/drivers/media/dvb-core/dvb_vb2.c index 6974f1731529..1331f2c2237e 100644 --- a/drivers/media/dvb-core/dvb_vb2.c +++ b/drivers/media/dvb-core/dvb_vb2.c @@ -358,6 +358,12 @@ int dvb_vb2_reqbufs(struct dvb_vb2_ctx *ctx, struct dmx_requestbuffers *req) int dvb_vb2_querybuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b) { + struct vb2_queue *q = &ctx->vb_q; + + if (b->index >= q->num_buffers) { + dprintk(1, "[%s] buffer index out of range\n", ctx->name); + return -EINVAL; + } vb2_core_querybuf(&ctx->vb_q, b->index, b); dprintk(3, "[%s] index=%d\n", ctx->name, b->index); return 0; @@ -382,8 +388,13 @@ int dvb_vb2_expbuf(struct dvb_vb2_ctx *ctx, struct dmx_exportbuffer *exp) int dvb_vb2_qbuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b) { + struct vb2_queue *q = &ctx->vb_q; int ret; + if (b->index >= q->num_buffers) { + dprintk(1, "[%s] buffer index out of range\n", ctx->name); + return -EINVAL; + } ret = vb2_core_qbuf(&ctx->vb_q, b->index, b, NULL); if (ret) { dprintk(1, "[%s] index=%d errno=%d\n", ctx->name, -- 2.25.1
From: Nicolas Dufresne <nicolas.dufresne@collabora.com> stable inclusion from stable-v5.10.147 commit 6f478fe8c3fbdfd82249bad762b0ffa7a551389f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 3a99c4474112f49a5459933d8758614002ca0ddc upstream. Quite often, the HW get stuck in error condition if a stream error was detected. As documented, the HW should stop immediately and self reset. There is likely a problem or a miss-understanding of the self reset mechanism, as unless we make a long pause, the next command will then report an error even if there is no error in it. Disabling error detection fixes the issue, and let the decoder continue after an error. This patch is safe for backport into older kernels. Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/staging/media/rkvdec/rkvdec-h264.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c index 7013f7ce3678..ddccd97a359f 100644 --- a/drivers/staging/media/rkvdec/rkvdec-h264.c +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c @@ -1124,8 +1124,8 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx) schedule_delayed_work(&rkvdec->watchdog_work, msecs_to_jiffies(2000)); - writel(0xffffffff, rkvdec->regs + RKVDEC_REG_STRMD_ERR_EN); - writel(0xffffffff, rkvdec->regs + RKVDEC_REG_H264_ERR_E); + writel(0, rkvdec->regs + RKVDEC_REG_STRMD_ERR_EN); + writel(0, rkvdec->regs + RKVDEC_REG_H264_ERR_E); writel(1, rkvdec->regs + RKVDEC_REG_PREF_LUMA_CACHE_COMMAND); writel(1, rkvdec->regs + RKVDEC_REG_PREF_CHR_CACHE_COMMAND); -- 2.25.1
From: Tianyu Lan <Tianyu.Lan@microsoft.com> stable inclusion from stable-v5.10.147 commit 625899cd06e1b4a12b374b09354404e52457da6a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 82806744fd7dde603b64c151eeddaa4ee62193fd upstream. swiotlb_find_slots() skips slots according to io tlb aligned mask calculated from min aligned mask and original physical address offset. This affects max mapping size. The mapping size can't achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is non-zero. This will cause system boot up failure in Hyper-V Isolation VM where swiotlb force is enabled. Scsi layer use return value of dma_max_mapping_size() to set max segment size and it finally calls swiotlb_max_mapping_size(). Hyper-V storage driver sets min align mask to 4k - 1. Scsi layer may pass 256k length of request buffer with 0~4k offset and Hyper-V storage driver can't get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't find 256k length bounce buffer with offset. Make swiotlb_max_mapping _size() take min align mask into account. Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- kernel/dma/swiotlb.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 4a9831d01f0e..d897d161366a 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -734,7 +734,18 @@ dma_addr_t swiotlb_map(struct device *dev, phys_addr_t paddr, size_t size, size_t swiotlb_max_mapping_size(struct device *dev) { - return ((size_t)IO_TLB_SIZE) * IO_TLB_SEGSIZE; + int min_align_mask = dma_get_min_align_mask(dev); + int min_align = 0; + + /* + * swiotlb_find_slots() skips slots according to + * min align mask. This affects max mapping size. + * Take it into acount here. + */ + if (min_align_mask) + min_align = roundup(min_align_mask, IO_TLB_SIZE); + + return ((size_t)IO_TLB_SIZE) * IO_TLB_SEGSIZE - min_align; } bool is_swiotlb_active(void) -- 2.25.1
From: YuTong Chang <mtwget@gmail.com> stable inclusion from stable-v5.10.147 commit 8934aea1a46c7f41e713613cbc865c135838ab54 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2eb502f496f7764027b7958d4e74356fed918059 ] According to technical manual(table 11-24), the DMA of MMCHS0 should be direct mapped. Fixes: b5e509066074 ("ARM: DTS: am33xx: Use the new DT bindings for the eDMA3") Signed-off-by: YuTong Chang <mtwget@gmail.com> Message-Id: <20220620124146.5330-1-mtwget@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm/boot/dts/am33xx-l4.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 29fafb67cfaa..0d36e9dd14a4 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1352,8 +1352,7 @@ SYSC_OMAP2_SOFTRESET | mmc1: mmc@0 { compatible = "ti,am335-sdhci"; ti,needs-special-reset; - dmas = <&edma_xbar 24 0 0 - &edma_xbar 25 0 0>; + dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; interrupts = <64>; reg = <0x0 0x1000>; -- 2.25.1
From: Richard Zhu <hongxing.zhu@nxp.com> stable inclusion from stable-v5.10.147 commit a658f0bc72cb4e9189ced0713da5b6f536f6941b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 051d9eb403887bb11852b7a4f744728a6a4b1b58 ] On i.MX7/iMX8MM/iMX8MQ, the initialized default value of PERST bit(BIT3) of SRC_PCIEPHY_RCR is 1b'1. But i.MX8MP has one inversed default value 1b'0 of PERST bit. And the PERST bit should be kept 1b'1 after power and clocks are stable. So fix the i.MX8MP PCIe PHY PERST support here. Fixes: e08672c03981 ("reset: imx7: Add support for i.MX8MP SoC") Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Richard Leitner <richard.leitner@skidata.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/1661845564-11373-5-git-send-email-hongxing.zhu@nxp... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/reset/reset-imx7.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c index 185a333df66c..d2408725eb2c 100644 --- a/drivers/reset/reset-imx7.c +++ b/drivers/reset/reset-imx7.c @@ -329,6 +329,7 @@ static int imx8mp_reset_set(struct reset_controller_dev *rcdev, break; case IMX8MP_RESET_PCIE_CTRL_APPS_EN: + case IMX8MP_RESET_PCIEPHY_PERST: value = assert ? 0 : bit; break; } -- 2.25.1
From: Samuel Holland <samuel@sholland.org> stable inclusion from stable-v5.10.147 commit 3e0405c69bc9e3717f247c1849a31545098997c1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit fd362baad2e659ef0fb5652f023a606b248f1781 ] sunxi_sram_claim() checks the sram_desc->claimed flag before updating the register, with the intent that only one device can claim a region. However, this was ineffective because the flag was never set. Fixes: 4af34b572a85 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220815041248.53268-4-samuel@sholland.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/soc/sunxi/sunxi_sram.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c index d4c7bd59429e..5d1305483542 100644 --- a/drivers/soc/sunxi/sunxi_sram.c +++ b/drivers/soc/sunxi/sunxi_sram.c @@ -254,6 +254,7 @@ int sunxi_sram_claim(struct device *dev) writel(val | ((device << sram_data->offset) & mask), base + sram_data->reg); + sram_desc->claimed = true; spin_unlock(&sram_lock); return 0; -- 2.25.1
From: Samuel Holland <samuel@sholland.org> stable inclusion from stable-v5.10.147 commit 0fdc3ab9b4386b73b47e55d06f4b6c3888da7246 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 90e10a1fcd9b24b4ba8c0d35136127473dcd829e ] This driver exports a regmap tied to the platform device (as opposed to a syscon, which exports a regmap tied to the OF node). Because of this, the driver can never be unbound, as that would destroy the regmap. Use builtin_platform_driver_probe() to enforce this limitation. Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64") Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220815041248.53268-5-samuel@sholland.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/soc/sunxi/sunxi_sram.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c index 5d1305483542..ccf42086f6ca 100644 --- a/drivers/soc/sunxi/sunxi_sram.c +++ b/drivers/soc/sunxi/sunxi_sram.c @@ -319,7 +319,7 @@ static struct regmap_config sunxi_sram_emac_clock_regmap = { .writeable_reg = sunxi_sram_regmap_accessible_reg, }; -static int sunxi_sram_probe(struct platform_device *pdev) +static int __init sunxi_sram_probe(struct platform_device *pdev) { struct resource *res; struct dentry *d; @@ -397,9 +397,8 @@ static struct platform_driver sunxi_sram_driver = { .name = "sunxi-sram", .of_match_table = sunxi_sram_dt_match, }, - .probe = sunxi_sram_probe, }; -module_platform_driver(sunxi_sram_driver); +builtin_platform_driver_probe(sunxi_sram_driver, sunxi_sram_probe); MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); MODULE_DESCRIPTION("Allwinner sunXi SRAM Controller Driver"); -- 2.25.1
From: Cai Huoqing <caihuoqing@baidu.com> stable inclusion from stable-v5.10.147 commit 50fbc81f80d2d7eefca6992190b07a1285fdcf95 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1f3753a5f042fea6539986f9caf2552877527d8a ] Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210908071716.772-1-caihuoqing@baidu.com Stable-dep-of: 49fad91a7b89 ("soc: sunxi: sram: Fix probe function ordering issues") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/soc/sunxi/sunxi_sram.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c index ccf42086f6ca..ba05727b2614 100644 --- a/drivers/soc/sunxi/sunxi_sram.c +++ b/drivers/soc/sunxi/sunxi_sram.c @@ -321,7 +321,6 @@ static struct regmap_config sunxi_sram_emac_clock_regmap = { static int __init sunxi_sram_probe(struct platform_device *pdev) { - struct resource *res; struct dentry *d; struct regmap *emac_clock; const struct sunxi_sramc_variant *variant; @@ -332,8 +331,7 @@ static int __init sunxi_sram_probe(struct platform_device *pdev) if (!variant) return -EINVAL; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(&pdev->dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); -- 2.25.1
From: Samuel Holland <samuel@sholland.org> stable inclusion from stable-v5.10.147 commit 4e2ede7cb9b5d4950d8e837d50a480250752f2d1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 49fad91a7b8941979c3e9a35f9894ac45bc5d3d6 ] Errors from debugfs are intended to be non-fatal, and should not prevent the driver from probing. Since debugfs file creation is treated as infallible, move it below the parts of the probe function that can fail. This prevents an error elsewhere in the probe function from causing the file to leak. Do the same for the call to of_platform_populate(). Finally, checkpatch suggests an octal literal for the file permissions. Fixes: 4af34b572a85 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64") Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220815041248.53268-6-samuel@sholland.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/soc/sunxi/sunxi_sram.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c index ba05727b2614..ef1620ea4bdb 100644 --- a/drivers/soc/sunxi/sunxi_sram.c +++ b/drivers/soc/sunxi/sunxi_sram.c @@ -321,9 +321,9 @@ static struct regmap_config sunxi_sram_emac_clock_regmap = { static int __init sunxi_sram_probe(struct platform_device *pdev) { - struct dentry *d; struct regmap *emac_clock; const struct sunxi_sramc_variant *variant; + struct device *dev = &pdev->dev; sram_dev = &pdev->dev; @@ -335,13 +335,6 @@ static int __init sunxi_sram_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); - of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); - - d = debugfs_create_file("sram", S_IRUGO, NULL, NULL, - &sunxi_sram_fops); - if (!d) - return -ENOMEM; - if (variant->has_emac_clock) { emac_clock = devm_regmap_init_mmio(&pdev->dev, base, &sunxi_sram_emac_clock_regmap); @@ -350,6 +343,10 @@ static int __init sunxi_sram_probe(struct platform_device *pdev) return PTR_ERR(emac_clock); } + of_platform_populate(dev->of_node, NULL, NULL, dev); + + debugfs_create_file("sram", 0444, NULL, NULL, &sunxi_sram_fops); + return 0; } -- 2.25.1
From: Samuel Holland <samuel@sholland.org> stable inclusion from stable-v5.10.147 commit 8884a192f95e6f845d11d039b1bc0ca0c368737f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e3c95edb1bd8b9c2cb0caa6ae382fc8080f6a0ed ] The labels were backward with respect to the register values. The SRAM is mapped to the CPU when the register value is 1. Fixes: 5e4fb6429761 ("drivers: soc: sunxi: add support for A64 and its SRAM C") Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220815041248.53268-7-samuel@sholland.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/soc/sunxi/sunxi_sram.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c index ef1620ea4bdb..443e38e9f30a 100644 --- a/drivers/soc/sunxi/sunxi_sram.c +++ b/drivers/soc/sunxi/sunxi_sram.c @@ -78,8 +78,8 @@ static struct sunxi_sram_desc sun4i_a10_sram_d = { static struct sunxi_sram_desc sun50i_a64_sram_c = { .data = SUNXI_SRAM_DATA("C", 0x4, 24, 1, - SUNXI_SRAM_MAP(0, 1, "cpu"), - SUNXI_SRAM_MAP(1, 0, "de2")), + SUNXI_SRAM_MAP(1, 0, "cpu"), + SUNXI_SRAM_MAP(0, 1, "de2")), }; static const struct of_device_id sunxi_sram_dt_ids[] = { -- 2.25.1
From: Martin Povišer <povik+lin@cutebit.org> stable inclusion from stable-v5.10.147 commit 359e73edd3be51d192923a90f2f2d44dd6a7c131 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 0a0342ede303fc420f3a388e1ae82da3ae8ff6bd ] On probe of the ASoC component, the device is reset but the regcache is retained. This means the regcache gets out of sync if the codec is rebound to a sound card for a second time. Fix it by reinitializing the regcache to defaults after the device is reset. Fixes: b0bcbe615756 ("ASoC: tas2770: Fix calling reset in probe") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220919173453.84292-1-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/soc/codecs/tas2770.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c index 024ec68e8d35..171bbcc919d5 100644 --- a/sound/soc/codecs/tas2770.c +++ b/sound/soc/codecs/tas2770.c @@ -495,6 +495,8 @@ static struct snd_soc_dai_driver tas2770_dai_driver[] = { }, }; +static const struct regmap_config tas2770_i2c_regmap; + static int tas2770_codec_probe(struct snd_soc_component *component) { struct tas2770_priv *tas2770 = @@ -508,6 +510,7 @@ static int tas2770_codec_probe(struct snd_soc_component *component) } tas2770_reset(tas2770); + regmap_reinit_cache(tas2770->regmap, &tas2770_i2c_regmap); return 0; } -- 2.25.1
From: Brian Norris <briannorris@chromium.org> stable inclusion from stable-v5.10.147 commit 330b77578168ae6b83fe783d797a86b139cdc4f4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit cc62d98bd56d45de4531844ca23913a15136c05b ] This reverts commit 211f276ed3d96e964d2d1106a198c7f4a4b3f4c0. For quite some time, core DRM helpers already ensure that any relevant connectors/CRTCs/etc. are disabled, as well as their associated components (e.g., bridges) when suspending the system. Thus, analogix_dp_bridge_{enable,disable}() already get called, which in turn call drm_panel_{prepare,unprepare}(). This makes these drm_panel_*() calls redundant. Besides redundancy, there are a few problems with this handling: (1) drm_panel_{prepare,unprepare}() are *not* reference-counted APIs and are not in general designed to be handled by multiple callers -- although some panel drivers have a coarse 'prepared' flag that mitigates some damage, at least. So at a minimum this is redundant and confusing, but in some cases, this could be actively harmful. (2) The error-handling is a bit non-standard. We ignored errors in suspend(), but handled errors in resume(). And recently, people noticed that the clk handling is unbalanced in error paths, and getting *that* right is not actually trivial, given the current way errors are mostly ignored. (3) In the particular way analogix_dp_{suspend,resume}() get used (e.g., in rockchip_dp_*(), as a late/early callback), we don't necessarily have a proper PM relationship between the DP/bridge device and the panel device. So while the DP bridge gets resumed, the panel's parent device (e.g., platform_device) may still be suspended, and so any prepare() calls may fail. So remove the superfluous, possibly-harmful suspend()/resume() handling of panel state. Fixes: 211f276ed3d9 ("drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time") Link: https://lore.kernel.org/all/Yv2CPBD3Picg%2FgVe@google.com/ Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220822180729.1.I8ac5abe3a4c1... Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index a7bcb429c02b..e8baa07450b7 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -1865,12 +1865,6 @@ EXPORT_SYMBOL_GPL(analogix_dp_remove); int analogix_dp_suspend(struct analogix_dp_device *dp) { clk_disable_unprepare(dp->clock); - - if (dp->plat_data->panel) { - if (drm_panel_unprepare(dp->plat_data->panel)) - DRM_ERROR("failed to turnoff the panel\n"); - } - return 0; } EXPORT_SYMBOL_GPL(analogix_dp_suspend); @@ -1885,13 +1879,6 @@ int analogix_dp_resume(struct analogix_dp_device *dp) return ret; } - if (dp->plat_data->panel) { - if (drm_panel_prepare(dp->plat_data->panel)) { - DRM_ERROR("failed to setup the panel\n"); - return -EBUSY; - } - } - return 0; } EXPORT_SYMBOL_GPL(analogix_dp_resume); -- 2.25.1
From: Yang Yingliang <yangyingliang@huawei.com> stable inclusion from stable-v5.10.147 commit 57959392f7f00db2c2b82be8e3624810b7e0c59f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit a54dc27bd25f20ee3ea2009584b3166d25178243 ] devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER), add a minus sign to fix it. Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/input/touchscreen/melfas_mip4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/melfas_mip4.c b/drivers/input/touchscreen/melfas_mip4.c index f67efdd040b2..43fcc8c84e2f 100644 --- a/drivers/input/touchscreen/melfas_mip4.c +++ b/drivers/input/touchscreen/melfas_mip4.c @@ -1453,7 +1453,7 @@ static int mip4_probe(struct i2c_client *client, const struct i2c_device_id *id) "ce", GPIOD_OUT_LOW); if (IS_ERR(ts->gpio_ce)) { error = PTR_ERR(ts->gpio_ce); - if (error != EPROBE_DEFER) + if (error != -EPROBE_DEFER) dev_err(&client->dev, "Failed to get gpio: %d\n", error); return error; -- 2.25.1
From: Peilin Ye <peilin.ye@bytedance.com> stable inclusion from stable-v5.10.147 commit fa065e60811a689601924e8ade4a81a90468e204 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit a43206156263fbaf1f2b7f96257441f331e91bb7 ] Currently usbnet_disconnect() unanchors and frees all deferred URBs using usb_scuttle_anchored_urbs(), which does not free urb->context, causing a memory leak as reported by syzbot. Use a usb_get_from_anchor() while loop instead, similar to what we did in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in play_deferred"). Also free urb->sg. Reported-and-tested-by: syzbot+dcd3e13cf4472f2e0ba1@syzkaller.appspotmail.com Fixes: 69ee472f2706 ("usbnet & cdc-ether: Autosuspend for online devices") Fixes: 638c5115a794 ("USBNET: support DMA SG") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/20220923042551.2745-1-yepeilin.cs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/usb/usbnet.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 1239fd57514b..43d70348343b 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1567,6 +1567,7 @@ void usbnet_disconnect (struct usb_interface *intf) struct usbnet *dev; struct usb_device *xdev; struct net_device *net; + struct urb *urb; dev = usb_get_intfdata(intf); usb_set_intfdata(intf, NULL); @@ -1583,7 +1584,11 @@ void usbnet_disconnect (struct usb_interface *intf) net = dev->net; unregister_netdev (net); - usb_scuttle_anchored_urbs(&dev->deferred); + while ((urb = usb_get_from_anchor(&dev->deferred))) { + dev_kfree_skb(urb->context); + kfree(urb->sg); + usb_free_urb(urb); + } if (dev->driver_info->unbind) dev->driver_info->unbind (dev, intf); -- 2.25.1
From: Hangyu Hua <hbh25y@gmail.com> stable inclusion from stable-v5.10.147 commit fde656dbc3720f1991631eb678087c6af7a4461b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 6e23ec0ba92d426c77a73a9ccab16346e5e0ef49 ] nf_ct_put need to be called to put the refcount got by tcf_ct_fill_params to avoid possible refcount leak when tcf_ct_flow_table_get fails. Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220923020046.8021-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/sched/act_ct.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c index 825b3e9b55f7..f7e88d7466c3 100644 --- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -1293,7 +1293,7 @@ static int tcf_ct_init(struct net *net, struct nlattr *nla, err = tcf_ct_flow_table_get(params); if (err) - goto cleanup; + goto cleanup_params; spin_lock_bh(&c->tcf_lock); goto_ch = tcf_action_set_ctrlact(*a, parm->action, goto_ch); @@ -1308,6 +1308,9 @@ static int tcf_ct_init(struct net *net, struct nlattr *nla, return res; +cleanup_params: + if (params->tmpl) + nf_ct_put(params->tmpl); cleanup: if (goto_ch) tcf_chain_put_by_act(goto_ch); -- 2.25.1
From: Rafael Mendonca <rafaelmendsr@gmail.com> stable inclusion from stable-v5.10.147 commit 2c248c4681620e76d42ef16a14050e26bd07702d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c635ebe8d911a93bd849a9419b01a58783de76f1 ] The label passed to the QDESC_GET for the ETHOFLD TXQ, RXQ, and FLQ, is the 'out' one, which skips the 'out_unlock' label, and thus doesn't unlock the 'uld_mutex' before returning. Additionally, since commit 5148e5950c67 ("cxgb4: add EOTID tracking and software context dump"), the access to these ETHOFLD hardware queues should be protected by the 'mqprio_mutex' instead. Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Fixes: 5148e5950c67 ("cxgb4: add EOTID tracking and software context dump") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Reviewed-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Link: https://lore.kernel.org/r/20220922175109.764898-1-rafaelmendsr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- .../net/ethernet/chelsio/cxgb4/cudbg_lib.c | 28 +++++++++++++------ 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c index c5b0e725b238..2169351b6afc 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c @@ -14,6 +14,7 @@ #include "cudbg_entity.h" #include "cudbg_lib.h" #include "cudbg_zlib.h" +#include "cxgb4_tc_mqprio.h" static const u32 t6_tp_pio_array[][IREG_NUM_ELEM] = { {0x7e40, 0x7e44, 0x020, 28}, /* t6_tp_pio_regs_20_to_3b */ @@ -3476,7 +3477,7 @@ int cudbg_collect_qdesc(struct cudbg_init *pdbg_init, for (i = 0; i < utxq->ntxq; i++) QDESC_GET_TXQ(&utxq->uldtxq[i].q, cudbg_uld_txq_to_qtype(j), - out_unlock); + out_unlock_uld); } } @@ -3493,7 +3494,7 @@ int cudbg_collect_qdesc(struct cudbg_init *pdbg_init, for (i = 0; i < urxq->nrxq; i++) QDESC_GET_RXQ(&urxq->uldrxq[i].rspq, cudbg_uld_rxq_to_qtype(j), - out_unlock); + out_unlock_uld); } /* ULD FLQ */ @@ -3505,7 +3506,7 @@ int cudbg_collect_qdesc(struct cudbg_init *pdbg_init, for (i = 0; i < urxq->nrxq; i++) QDESC_GET_FLQ(&urxq->uldrxq[i].fl, cudbg_uld_flq_to_qtype(j), - out_unlock); + out_unlock_uld); } /* ULD CIQ */ @@ -3518,29 +3519,34 @@ int cudbg_collect_qdesc(struct cudbg_init *pdbg_init, for (i = 0; i < urxq->nciq; i++) QDESC_GET_RXQ(&urxq->uldrxq[base + i].rspq, cudbg_uld_ciq_to_qtype(j), - out_unlock); + out_unlock_uld); } } + mutex_unlock(&uld_mutex); + + if (!padap->tc_mqprio) + goto out; + mutex_lock(&padap->tc_mqprio->mqprio_mutex); /* ETHOFLD TXQ */ if (s->eohw_txq) for (i = 0; i < s->eoqsets; i++) QDESC_GET_TXQ(&s->eohw_txq[i].q, - CUDBG_QTYPE_ETHOFLD_TXQ, out); + CUDBG_QTYPE_ETHOFLD_TXQ, out_unlock_mqprio); /* ETHOFLD RXQ and FLQ */ if (s->eohw_rxq) { for (i = 0; i < s->eoqsets; i++) QDESC_GET_RXQ(&s->eohw_rxq[i].rspq, - CUDBG_QTYPE_ETHOFLD_RXQ, out); + CUDBG_QTYPE_ETHOFLD_RXQ, out_unlock_mqprio); for (i = 0; i < s->eoqsets; i++) QDESC_GET_FLQ(&s->eohw_rxq[i].fl, - CUDBG_QTYPE_ETHOFLD_FLQ, out); + CUDBG_QTYPE_ETHOFLD_FLQ, out_unlock_mqprio); } -out_unlock: - mutex_unlock(&uld_mutex); +out_unlock_mqprio: + mutex_unlock(&padap->tc_mqprio->mqprio_mutex); out: qdesc_info->qdesc_entry_size = sizeof(*qdesc_entry); @@ -3578,6 +3584,10 @@ int cudbg_collect_qdesc(struct cudbg_init *pdbg_init, #undef QDESC_GET return rc; + +out_unlock_uld: + mutex_unlock(&uld_mutex); + goto out; } int cudbg_collect_flash(struct cudbg_init *pdbg_init, -- 2.25.1
From: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> stable inclusion from stable-v5.10.147 commit 469dc5fd9a58e8111a9163083a87a940bb2ee20d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit f1c772d581843e3a14bbd62ef7e40b56fc307f27 ] Add a new line in functions nvme_pr_preempt(), nvme_pr_clear(), and nvme_pr_release() after variable declaration which follows the rest of the code in the nvme/host/core.c. No functional change(s) in this patch. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Stable-dep-of: c292a337d0e4 ("nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/nvme/host/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index bc8452ffb776..0b5555c05709 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2248,18 +2248,21 @@ static int nvme_pr_preempt(struct block_device *bdev, u64 old, u64 new, enum pr_type type, bool abort) { u32 cdw10 = nvme_pr_type(type) << 8 | (abort ? 2 : 1); + return nvme_pr_command(bdev, cdw10, old, new, nvme_cmd_resv_acquire); } static int nvme_pr_clear(struct block_device *bdev, u64 key) { u32 cdw10 = 1 | (key ? 1 << 3 : 0); + return nvme_pr_command(bdev, cdw10, key, 0, nvme_cmd_resv_register); } static int nvme_pr_release(struct block_device *bdev, u64 key, enum pr_type type) { u32 cdw10 = nvme_pr_type(type) << 8 | (key ? 1 << 3 : 0); + return nvme_pr_command(bdev, cdw10, key, 0, nvme_cmd_resv_release); } -- 2.25.1
From: Michael Kelley <mikelley@microsoft.com> stable inclusion from stable-v5.10.147 commit 743a6e53cf1c19786144d4268f7e445403fb86f1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit c292a337d0e45a292c301e3cd51c35aa0ae91e95 ] The IOC_PR_CLEAR and IOC_PR_RELEASE ioctls are non-functional on NVMe devices because the nvme_pr_clear() and nvme_pr_release() functions set the IEKEY field incorrectly. The IEKEY field should be set only when the key is zero (i.e, not specified). The current code does it backwards. Furthermore, the NVMe spec describes the persistent reservation "clear" function as an option on the reservation release command. The current implementation of nvme_pr_clear() erroneously uses the reservation register command. Fix these errors. Note that NVMe version 1.3 and later specify that setting the IEKEY field will return an error of Invalid Field in Command. The fix will set IEKEY when the key is zero, which is appropriate as these ioctls consider a zero key to be "unspecified", and the intention of the spec change is to require a valid key. Tested on a version 1.4 PCI NVMe device in an Azure VM. Fixes: 1673f1f08c88 ("nvme: move block_device_operations and ns/ctrl freeing to common code") Fixes: 1d277a637a71 ("NVMe: Add persistent reservation ops") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/nvme/host/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 0b5555c05709..d7548410197c 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2254,14 +2254,14 @@ static int nvme_pr_preempt(struct block_device *bdev, u64 old, u64 new, static int nvme_pr_clear(struct block_device *bdev, u64 key) { - u32 cdw10 = 1 | (key ? 1 << 3 : 0); + u32 cdw10 = 1 | (key ? 0 : 1 << 3); - return nvme_pr_command(bdev, cdw10, key, 0, nvme_cmd_resv_register); + return nvme_pr_command(bdev, cdw10, key, 0, nvme_cmd_resv_release); } static int nvme_pr_release(struct block_device *bdev, u64 key, enum pr_type type) { - u32 cdw10 = nvme_pr_type(type) << 8 | (key ? 1 << 3 : 0); + u32 cdw10 = nvme_pr_type(type) << 8 | (key ? 0 : 1 << 3); return nvme_pr_command(bdev, cdw10, key, 0, nvme_cmd_resv_release); } -- 2.25.1
From: Junxiao Chang <junxiao.chang@intel.com> stable inclusion from stable-v5.10.147 commit 84cab3531ff77583ef7e76cff025e76e2a748f3f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 49725ffc15fc4e9fae68c55b691fd25168cbe5c1 ] This commit fixes DMA engine reset timeout issue in suspend/resume with ADLink I-Pi SMARC Plus board which dmesg shows: ... [ 54.678271] PM: suspend exit [ 54.754066] intel-eth-pci 0000:00:1d.2 enp0s29f2: PHY [stmmac-3:01] driver [Maxlinear Ethernet GPY215B] (irq=POLL) [ 54.755808] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-0 ... [ 54.780482] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-7 [ 55.784098] intel-eth-pci 0000:00:1d.2: Failed to reset the dma [ 55.784111] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_hw_setup: DMA engine initialization failed [ 55.784115] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_open: Hw setup failed ... The issue is related with serdes which impacts clock. There is serdes in ADLink I-Pi SMARC board ethernet controller. Please refer to commit b9663b7ca6ff78 ("net: stmmac: Enable SERDES power up/down sequence") for detial. When issue is reproduced, DMA engine clock is not ready because serdes is not powered up. To reproduce DMA engine reset timeout issue with hardware which has serdes in GBE controller, install Ubuntu. In Ubuntu GUI, click "Power Off/Log Out" -> "Suspend" menu, it disables network interface, then goes to sleep mode. When it wakes up, it enables network interface again. Stmmac driver is called in this way: 1. stmmac_release: Stop network interface. In this function, it disables DMA engine and network interface; 2. stmmac_suspend: It is called in kernel suspend flow. But because network interface has been disabled(netif_running(ndev) is false), it does nothing and returns directly; 3. System goes into S3 or S0ix state. Some time later, system is waken up by keyboard or mouse; 4. stmmac_resume: It does nothing because network interface has been disabled; 5. stmmac_open: It is called to enable network interace again. DMA engine is initialized in this API, but serdes is not power on so there will be DMA engine reset timeout issue. Similarly, serdes powerdown should be added in stmmac_release. Network interface might be disabled by cmd "ifconfig eth0 down", DMA engine, phy and mac have been disabled in ndo_stop callback, serdes should be powered down as well. It doesn't make sense that serdes is on while other components have been turned off. If ethernet interface is in enabled state(netif_running(ndev) is true) before suspend/resume, the issue couldn't be reproduced because serdes could be powered up in stmmac_resume. Because serdes_powerup is added in stmmac_open, it doesn't need to be called in probe function. Fixes: b9663b7ca6ff78 ("net: stmmac: Enable SERDES power up/down sequence") Signed-off-by: Junxiao Chang <junxiao.chang@intel.com> Reviewed-by: Voon Weifeng <weifeng.voon@intel.com> Tested-by: Jimmy JS Chen <jimmyjs.chen@adlinktech.com> Tested-by: Looi, Hong Aun <hong.aun.looi@intel.com> Link: https://lore.kernel.org/r/20220923050448.1220250-1-junxiao.chang@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 23 +++++++++++-------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 8cbc3774ce43..f28d82213a1f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2907,6 +2907,15 @@ static int stmmac_open(struct net_device *dev) goto init_error; } + if (priv->plat->serdes_powerup) { + ret = priv->plat->serdes_powerup(dev, priv->plat->bsp_priv); + if (ret < 0) { + netdev_err(priv->dev, "%s: Serdes powerup failed\n", + __func__); + goto init_error; + } + } + ret = stmmac_hw_setup(dev, true); if (ret < 0) { netdev_err(priv->dev, "%s: Hw setup failed\n", __func__); @@ -3022,6 +3031,10 @@ static int stmmac_release(struct net_device *dev) /* Disable the MAC Rx/Tx */ stmmac_mac_set(priv, priv->ioaddr, false); + /* Powerdown Serdes if there is */ + if (priv->plat->serdes_powerdown) + priv->plat->serdes_powerdown(dev, priv->plat->bsp_priv); + netif_carrier_off(dev); stmmac_release_ptp(priv); @@ -5178,14 +5191,6 @@ int stmmac_dvr_probe(struct device *device, goto error_netdev_register; } - if (priv->plat->serdes_powerup) { - ret = priv->plat->serdes_powerup(ndev, - priv->plat->bsp_priv); - - if (ret < 0) - goto error_serdes_powerup; - } - #ifdef CONFIG_DEBUG_FS stmmac_init_fs(ndev); #endif @@ -5197,8 +5202,6 @@ int stmmac_dvr_probe(struct device *device, return ret; -error_serdes_powerup: - unregister_netdev(ndev); error_netdev_register: phylink_destroy(priv->phylink); error_phy_setup: -- 2.25.1
From: Wang Yufen <wangyufen@huawei.com> stable inclusion from stable-v5.10.147 commit 83db457b41a821b39e0e7988341a9341b5848f08 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit bc7a319844891746135dc1f34ab9df78d636a3ac ] The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So if bind success or errno != EADDRINUSE, testcase should be failed. Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test") Signed-off-by: Wang Yufen <wangyufen@huawei.com> Link: https://lore.kernel.org/r/1663916557-10730-1-git-send-email-wangyufen@huawei... Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- tools/testing/selftests/net/reuseport_bpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/reuseport_bpf.c b/tools/testing/selftests/net/reuseport_bpf.c index b5277106df1f..b0cc082fbb84 100644 --- a/tools/testing/selftests/net/reuseport_bpf.c +++ b/tools/testing/selftests/net/reuseport_bpf.c @@ -330,7 +330,7 @@ static void test_extra_filter(const struct test_params p) if (bind(fd1, addr, sockaddr_size())) error(1, errno, "failed to bind recv socket 1"); - if (!bind(fd2, addr, sockaddr_size()) && errno != EADDRINUSE) + if (!bind(fd2, addr, sockaddr_size()) || errno != EADDRINUSE) error(1, errno, "bind socket 2 should fail with EADDRINUSE"); free(addr); -- 2.25.1
From: Han Xu <han.xu@nxp.com> stable inclusion from stable-v5.10.147 commit cf41711aa4a7000fead6c9e8c088e4fd4fc02316 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit b1ff1bfe81e763420afd5f3f25f0b3cbfd97055c ] There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag should not be used. For instance, the default parent clock for QSPI is pll2_bus, which is also the parent clock for quite a few modules, such as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system hang due to pll2_bus rate changed. Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API") Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com Tested-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/imx/clk-imx6sx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c index fc1bd23d4583..598f3cf4eba4 100644 --- a/drivers/clk/imx/clk-imx6sx.c +++ b/drivers/clk/imx/clk-imx6sx.c @@ -280,13 +280,13 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) hws[IMX6SX_CLK_SSI3_SEL] = imx_clk_hw_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); hws[IMX6SX_CLK_SSI2_SEL] = imx_clk_hw_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); hws[IMX6SX_CLK_SSI1_SEL] = imx_clk_hw_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - hws[IMX6SX_CLK_QSPI1_SEL] = imx_clk_hw_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT); + hws[IMX6SX_CLK_QSPI1_SEL] = imx_clk_hw_mux("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels)); hws[IMX6SX_CLK_PERCLK_SEL] = imx_clk_hw_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); hws[IMX6SX_CLK_VID_SEL] = imx_clk_hw_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels)); hws[IMX6SX_CLK_ESAI_SEL] = imx_clk_hw_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); hws[IMX6SX_CLK_CAN_SEL] = imx_clk_hw_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels)); hws[IMX6SX_CLK_UART_SEL] = imx_clk_hw_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); - hws[IMX6SX_CLK_QSPI2_SEL] = imx_clk_hw_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT); + hws[IMX6SX_CLK_QSPI2_SEL] = imx_clk_hw_mux("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels)); hws[IMX6SX_CLK_SPDIF_SEL] = imx_clk_hw_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); hws[IMX6SX_CLK_AUDIO_SEL] = imx_clk_hw_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); hws[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_hw_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels)); -- 2.25.1
From: Florian Fainelli <f.fainelli@gmail.com> stable inclusion from stable-v5.10.147 commit a8e6cde5062fb2aff81f86cc0770591714bee545 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 1b24a132eba7a1c19475ba2510ec1c00af3ff914 ] After commit 31fd9b79dc58 ("ARM: dts: BCM5301X: update CRU block description") a warning from clk-iproc-pll.c was generated due to a duplicate PLL name as well as the console stopped working. Upon closer inspection it became clear that iproc_pll_clk_setup() used the Device Tree node unit name as an unique identifier as well as a parent name to parent all clocks under the PLL. BCM5301X was the first platform on which that got noticed because of the DT node unit name renaming but the same assumptions hold true for any user of the iproc_pll_clk_setup() function. The first 'clock-output-names' property is always guaranteed to be unique as well as providing the actual desired PLL clock name, so we utilize that to register the PLL and as a parent name of all children clock. Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20220905161504.1526-1-f.fainelli@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/bcm/clk-iproc-pll.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c index 274441e2ddb2..8f0619f362e3 100644 --- a/drivers/clk/bcm/clk-iproc-pll.c +++ b/drivers/clk/bcm/clk-iproc-pll.c @@ -736,6 +736,7 @@ void iproc_pll_clk_setup(struct device_node *node, const char *parent_name; struct iproc_clk *iclk_array; struct clk_hw_onecell_data *clk_data; + const char *clk_name; if (WARN_ON(!pll_ctrl) || WARN_ON(!clk_ctrl)) return; @@ -783,7 +784,12 @@ void iproc_pll_clk_setup(struct device_node *node, iclk = &iclk_array[0]; iclk->pll = pll; - init.name = node->name; + ret = of_property_read_string_index(node, "clock-output-names", + 0, &clk_name); + if (WARN_ON(ret)) + goto err_pll_register; + + init.name = clk_name; init.ops = &iproc_pll_ops; init.flags = 0; parent_name = of_clk_get_parent_name(node, 0); @@ -803,13 +809,11 @@ void iproc_pll_clk_setup(struct device_node *node, goto err_pll_register; clk_data->hws[0] = &iclk->hw; + parent_name = clk_name; /* now initialize and register all leaf clocks */ for (i = 1; i < num_clks; i++) { - const char *clk_name; - memset(&init, 0, sizeof(init)); - parent_name = node->name; ret = of_property_read_string_index(node, "clock-output-names", i, &clk_name); -- 2.25.1
From: Jim Mattson <jmattson@google.com> stable inclusion from stable-v5.10.147 commit 374d4c307534c5fdd56aa7f1eb2cba67160ac9a2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit aae2e72229cdb21f90df2dbe4244c977e5d3265b ] The only thing reported by CPUID.9 is the value of IA32_PLATFORM_DCA_CAP[31:0] in EAX. This MSR doesn't even exist in the guest, since CPUID.1:ECX.DCA[bit 18] is clear in the guest. Clear CPUID.9 in KVM_GET_SUPPORTED_CPUID. Fixes: 24c82e576b78 ("KVM: Sanitize cpuid") Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20220922231854.249383-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/x86/kvm/cpuid.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index b05e63667e48..7693071588c7 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -730,8 +730,6 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function) entry->edx = 0; } break; - case 9: - break; case 0xa: { /* Architectural Performance Monitoring */ struct x86_pmu_capability cap; union cpuid10_eax eax; -- 2.25.1
From: Nadav Amit <namit@vmware.com> stable inclusion from stable-v5.10.147 commit b12d0489e4021220b3341a95a6be37c5ff14729e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit efd608fa7403ba106412b437f873929e2c862e28 upstream. I encountered some occasional crashes of poke_int3_handler() when kprobes are set, while accessing desc->vec. The text poke mechanism claims to have an RCU-like behavior, but it does not appear that there is any quiescent state to ensure that nobody holds reference to desc. As a result, the following race appears to be possible, which can lead to memory corruption. CPU0 CPU1 ---- ---- text_poke_bp_batch() -> smp_store_release(&bp_desc, &desc) [ notice that desc is on the stack ] poke_int3_handler() [ int3 might be kprobe's so sync events are do not help ] -> try_get_desc(descp=&bp_desc) desc = __READ_ONCE(bp_desc) if (!desc) [false, success] WRITE_ONCE(bp_desc, NULL); atomic_dec_and_test(&desc.refs) [ success, desc space on the stack is being reused and might have non-zero value. ] arch_atomic_inc_not_zero(&desc->refs) [ might succeed since desc points to stack memory that was freed and might be reused. ] Fix this issue with small backportable patch. Instead of trying to make RCU-like behavior for bp_desc, just eliminate the unnecessary level of indirection of bp_desc, and hold the whole descriptor as a global. Anyhow, there is only a single descriptor at any given moment. Fixes: 1f676247f36a4 ("x86/alternatives: Implement a better poke_int3_handler() completion scheme") Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@kernel.org Link: https://lkml.kernel.org/r/20220920224743.3089-1-namit@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/x86/kernel/alternative.c | 45 ++++++++++++++++++----------------- 1 file changed, 23 insertions(+), 22 deletions(-) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 9d3c0d70a555..82e9fd11b364 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -1330,22 +1330,23 @@ struct bp_patching_desc { atomic_t refs; }; -static struct bp_patching_desc *bp_desc; +static struct bp_patching_desc bp_desc; static __always_inline -struct bp_patching_desc *try_get_desc(struct bp_patching_desc **descp) +struct bp_patching_desc *try_get_desc(void) { - /* rcu_dereference */ - struct bp_patching_desc *desc = __READ_ONCE(*descp); + struct bp_patching_desc *desc = &bp_desc; - if (!desc || !arch_atomic_inc_not_zero(&desc->refs)) + if (!arch_atomic_inc_not_zero(&desc->refs)) return NULL; return desc; } -static __always_inline void put_desc(struct bp_patching_desc *desc) +static __always_inline void put_desc(void) { + struct bp_patching_desc *desc = &bp_desc; + smp_mb__before_atomic(); arch_atomic_dec(&desc->refs); } @@ -1378,15 +1379,15 @@ noinstr int poke_int3_handler(struct pt_regs *regs) /* * Having observed our INT3 instruction, we now must observe - * bp_desc: + * bp_desc with non-zero refcount: * - * bp_desc = desc INT3 + * bp_desc.refs = 1 INT3 * WMB RMB - * write INT3 if (desc) + * write INT3 if (bp_desc.refs != 0) */ smp_rmb(); - desc = try_get_desc(&bp_desc); + desc = try_get_desc(); if (!desc) return 0; @@ -1440,7 +1441,7 @@ noinstr int poke_int3_handler(struct pt_regs *regs) ret = 1; out_put: - put_desc(desc); + put_desc(); return ret; } @@ -1471,18 +1472,20 @@ static int tp_vec_nr; */ static void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries) { - struct bp_patching_desc desc = { - .vec = tp, - .nr_entries = nr_entries, - .refs = ATOMIC_INIT(1), - }; unsigned char int3 = INT3_INSN_OPCODE; unsigned int i; int do_sync; lockdep_assert_held(&text_mutex); - smp_store_release(&bp_desc, &desc); /* rcu_assign_pointer */ + bp_desc.vec = tp; + bp_desc.nr_entries = nr_entries; + + /* + * Corresponds to the implicit memory barrier in try_get_desc() to + * ensure reading a non-zero refcount provides up to date bp_desc data. + */ + atomic_set_release(&bp_desc.refs, 1); /* * Corresponding read barrier in int3 notifier for making sure the @@ -1570,12 +1573,10 @@ static void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries text_poke_sync(); /* - * Remove and synchronize_rcu(), except we have a very primitive - * refcount based completion. + * Remove and wait for refs to be zero. */ - WRITE_ONCE(bp_desc, NULL); /* RCU_INIT_POINTER */ - if (!atomic_dec_and_test(&desc.refs)) - atomic_cond_read_acquire(&desc.refs, !VAL); + if (!atomic_dec_and_test(&bp_desc.refs)) + atomic_cond_read_acquire(&bp_desc.refs, !VAL); } static void text_poke_loc_init(struct text_poke_loc *tp, void *addr, -- 2.25.1
From: Kai Vehmanen <kai.vehmanen@linux.intel.com> stable inclusion from stable-v5.10.147 commit 98f722cc2438d16b8949fdce712feb1fbf9699e8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0W8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit c74193787b2f683751a67603fb5f15c7584f355f upstream. With commit 13046370c4d1 ("ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically"), old behaviour to consider the HDA pin number, when choosing PCM to assign, was dropped. Build on this change and limit the number of PCMs created to number of converters (= maximum number of concurrent display/receivers) when "mst_no_extra_pcms" and "dyn_pcm_no_legacy" quirks are both set. Fix the check in hdmi_find_pcm_slot() to ensure only spec->pcm_used entries are considered in the search. Elsewhere in the driver spec->pcm_used is already checked properly. Doing this avoids following warning at SOF driver probe for multiple machine drivers: [ 112.425297] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 4 [ 112.425298] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 5 [ 112.425299] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 6 Fixes: 13046370c4d1 ("ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically") BugLink: https://github.com/thesofproject/linux/issues/2573 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20220414150516.3638283-1-kai.vehmanen@linux.intel.... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_hdmi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index ccb10a2dfd56..7ca4c5a37b57 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1397,7 +1397,7 @@ static int hdmi_find_pcm_slot(struct hdmi_spec *spec, last_try: /* the last try; check the empty slots in pins */ - for (i = 0; i < spec->num_nids; i++) { + for (i = 0; i < spec->pcm_used; i++) { if (!test_bit(i, &spec->pcm_bitmap)) return i; } @@ -2273,7 +2273,9 @@ static int generic_hdmi_build_pcms(struct hda_codec *codec) * dev_num is the device entry number in a pin */ - if (codec->mst_no_extra_pcms) + if (spec->dyn_pcm_no_legacy && codec->mst_no_extra_pcms) + pcm_num = spec->num_cvts; + else if (codec->mst_no_extra_pcms) pcm_num = spec->num_nids; else pcm_num = spec->num_nids + spec->dev_num - 1; -- 2.25.1
From: Ryusuke Konishi <konishi.ryusuke@gmail.com> stable inclusion from stable-v5.10.148 commit 8a18fdc5ae8e6d7ac33c6ee0a2e5f9f1414ef412 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 723ac751208f6d6540191689cfbf6c77135a7a1b upstream. If creation or finalization of a checkpoint fails due to anomalies in the checkpoint metadata on disk, a kernel warning is generated. This patch replaces the WARN_ONs by nilfs_error, so that a kernel, booted with panic_on_warn, does not panic. A nilfs_error is appropriate here to handle the abnormal filesystem condition. This also replaces the detected error codes with an I/O error so that neither of the internal error codes is returned to callers. Link: https://lkml.kernel.org/r/20220929123330.19658-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+fbb3e0b24e8dae5a16ee@syzkaller.appspotmail.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/nilfs2/segment.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index 977e0271bd4c..545f764d70b1 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -880,9 +880,11 @@ static int nilfs_segctor_create_checkpoint(struct nilfs_sc_info *sci) nilfs_mdt_mark_dirty(nilfs->ns_cpfile); nilfs_cpfile_put_checkpoint( nilfs->ns_cpfile, nilfs->ns_cno, bh_cp); - } else - WARN_ON(err == -EINVAL || err == -ENOENT); - + } else if (err == -EINVAL || err == -ENOENT) { + nilfs_error(sci->sc_super, + "checkpoint creation failed due to metadata corruption."); + err = -EIO; + } return err; } @@ -896,7 +898,11 @@ static int nilfs_segctor_fill_in_checkpoint(struct nilfs_sc_info *sci) err = nilfs_cpfile_get_checkpoint(nilfs->ns_cpfile, nilfs->ns_cno, 0, &raw_cp, &bh_cp); if (unlikely(err)) { - WARN_ON(err == -EINVAL || err == -ENOENT); + if (err == -EINVAL || err == -ENOENT) { + nilfs_error(sci->sc_super, + "checkpoint finalization failed due to metadata corruption."); + err = -EIO; + } goto failed_ibh; } raw_cp->cp_snapshot_list.ssl_next = 0; -- 2.25.1
From: Hu Weiwen <sehuww@mail.scut.edu.cn> stable inclusion from stable-v5.10.148 commit b23b0cd57e2cebd40ea1ae2a96b5ede67392dab2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 7cb9994754f8a36ae9e5ec4597c5c4c2d6c03832 upstream. Clear O_TRUNC from the flags sent in the MDS create request. `atomic_open' is called before permission check. We should not do any modification to the file here. The caller will do the truncation afterward. Fixes: 124e68e74099 ("ceph: file operations") Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> [Xiubo: fixed a trivial conflict for 5.10 backport] Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/ceph/file.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 93d986856f1c..943655e36a79 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -703,6 +703,12 @@ int ceph_atomic_open(struct inode *dir, struct dentry *dentry, if (dentry->d_name.len > NAME_MAX) return -ENAMETOOLONG; + /* + * Do not truncate the file, since atomic_open is called before the + * permission check. The caller will do the truncation afterward. + */ + flags &= ~O_TRUNC; + if (flags & O_CREAT) { if (ceph_quota_is_max_files_exceeded(dir)) return -EDQUOT; @@ -769,9 +775,7 @@ int ceph_atomic_open(struct inode *dir, struct dentry *dentry, } set_bit(CEPH_MDS_R_PARENT_LOCKED, &req->r_req_flags); - err = ceph_mdsc_do_request(mdsc, - (flags & (O_CREAT|O_TRUNC)) ? dir : NULL, - req); + err = ceph_mdsc_do_request(mdsc, (flags & O_CREAT) ? dir : NULL, req); err = ceph_handle_snapdir(req, dentry, err); if (err) goto out_req; -- 2.25.1
From: Sami Tolvanen <samitolvanen@google.com> stable inclusion from stable-v5.10.148 commit c7f4af575b1d870ad4ac3838226f7fc454ce8de1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 2120635108b35ecad9c59c8b44f6cbdf4f98214e upstream. We enable -Wcast-function-type globally in the kernel to warn about mismatching types in function pointer casts. Compilers currently warn only about ABI incompability with this flag, but Clang 16 will enable a stricter version of the check by default that checks for an exact type match. This will be very noisy in the kernel, so disable -Wcast-function-type-strict without W=1 until the new warnings have been addressed. Cc: stable@vger.kernel.org Link: https://reviews.llvm.org/D134831 Link: https://github.com/ClangBuiltLinux/linux/issues/1724 Suggested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220930203310.4010564-1-samitolvanen@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- scripts/Makefile.extrawarn | 1 + 1 file changed, 1 insertion(+) diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn index 23d3967786b9..fe327a4532dd 100644 --- a/scripts/Makefile.extrawarn +++ b/scripts/Makefile.extrawarn @@ -52,6 +52,7 @@ KBUILD_CFLAGS += -Wno-format-zero-length KBUILD_CFLAGS += $(call cc-disable-warning, pointer-to-enum-cast) KBUILD_CFLAGS += -Wno-tautological-constant-out-of-range-compare KBUILD_CFLAGS += $(call cc-disable-warning, unaligned-access) +KBUILD_CFLAGS += $(call cc-disable-warning, cast-function-type-strict) endif endif -- 2.25.1
From: Shuah Khan <skhan@linuxfoundation.org> stable inclusion from stable-v5.10.148 commit fb380f548c44ba7ccecb95d411235e61197c3508 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 8bfdfa0d6b929ede7b6189e0e546ceb6a124d05d upstream. Update mediator information in the CoC interpretation document. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220901212319.56644-1-skhan@linuxfoundation.org Cc: stable@vger.kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- Documentation/process/code-of-conduct-interpretation.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/process/code-of-conduct-interpretation.rst b/Documentation/process/code-of-conduct-interpretation.rst index e899f14a4ba2..4f8a06b00f60 100644 --- a/Documentation/process/code-of-conduct-interpretation.rst +++ b/Documentation/process/code-of-conduct-interpretation.rst @@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're uncertain how to handle situations that come up. It will not be considered a violation report unless you want it to be. If you are uncertain about approaching the TAB or any other maintainers, please -reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>. +reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>. In the end, "be kind to each other" is really what the end goal is for everybody. We know everyone is human and we all fail at times, but the -- 2.25.1
From: Alexey Dobriyan <adobriyan@gmail.com> stable inclusion from stable-v5.10.148 commit beffc38dc6b208dd32957299e4f83a2f5731d0f9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 128dbd78bd673f9edbc4413072b23efb6657feb0 upstream. strdup() prototype doesn't live in stdlib.h . Add limits.h for PATH_MAX definition as well. This fixes the build on Android. Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/YRukaQbrgDWhiwGr@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- tools/perf/util/get_current_dir_name.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/get_current_dir_name.c b/tools/perf/util/get_current_dir_name.c index b205d929245f..e68935e9ac8c 100644 --- a/tools/perf/util/get_current_dir_name.c +++ b/tools/perf/util/get_current_dir_name.c @@ -3,8 +3,9 @@ // #ifndef HAVE_GET_CURRENT_DIR_NAME #include "get_current_dir_name.h" +#include <limits.h> +#include <string.h> #include <unistd.h> -#include <stdlib.h> /* Android's 'bionic' library, for one, doesn't have this */ -- 2.25.1
From: Jalal Mostafa <jalal.a.mostapha@gmail.com> stable inclusion from stable-v5.10.148 commit 132590d776e26491fa85af727f7980ac24563337 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 60240bc26114543fcbfcd8a28466e67e77b20388 upstream. The flag for need_wakeup is not set for xsks with `XDP_SHARED_UMEM` flag and of different queue ids and/or devices. They should inherit the flag from the first socket buffer pool since no flags can be specified once `XDP_SHARED_UMEM` is specified. Fixes: b5aea28dca134 ("xsk: Add shared umem support between queue ids") Signed-off-by: Jalal Mostafa <jalal.a.mostapha@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20220921135701.10199-1-jalal.a.mostapha@gmail.co... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- include/net/xsk_buff_pool.h | 2 +- net/xdp/xsk.c | 4 ++-- net/xdp/xsk_buff_pool.c | 5 +++-- 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/net/xsk_buff_pool.h b/include/net/xsk_buff_pool.h index 33bf0a584f7c..de62641de6f6 100644 --- a/include/net/xsk_buff_pool.h +++ b/include/net/xsk_buff_pool.h @@ -89,7 +89,7 @@ struct xsk_buff_pool *xp_create_and_assign_umem(struct xdp_sock *xs, struct xdp_umem *umem); int xp_assign_dev(struct xsk_buff_pool *pool, struct net_device *dev, u16 queue_id, u16 flags); -int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_umem *umem, +int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_sock *umem_xs, struct net_device *dev, u16 queue_id); void xp_destroy(struct xsk_buff_pool *pool); void xp_release(struct xdp_buff_xsk *xskb); diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index ca4716b92774..691841dc6d33 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -742,8 +742,8 @@ static int xsk_bind(struct socket *sock, struct sockaddr *addr, int addr_len) goto out_unlock; } - err = xp_assign_dev_shared(xs->pool, umem_xs->umem, - dev, qid); + err = xp_assign_dev_shared(xs->pool, umem_xs, dev, + qid); if (err) { xp_destroy(xs->pool); xs->pool = NULL; diff --git a/net/xdp/xsk_buff_pool.c b/net/xdp/xsk_buff_pool.c index e63a285a9856..c347e52f58df 100644 --- a/net/xdp/xsk_buff_pool.c +++ b/net/xdp/xsk_buff_pool.c @@ -198,17 +198,18 @@ int xp_assign_dev(struct xsk_buff_pool *pool, struct net_device *dev, return __xp_assign_dev(pool, dev, queue_id, flags); } -int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_umem *umem, +int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_sock *umem_xs, struct net_device *dev, u16 queue_id) { u16 flags; + struct xdp_umem *umem = umem_xs->umem; /* One fill and completion ring required for each queue id. */ if (!pool->fq || !pool->cq) return -EINVAL; flags = umem->zc ? XDP_ZEROCOPY : XDP_COPY; - if (pool->uses_need_wakeup) + if (umem_xs->pool->uses_need_wakeup) flags |= XDP_USE_NEED_WAKEUP; return __xp_assign_dev(pool, dev, queue_id, flags); -- 2.25.1
From: Yang Shi <shy828301@gmail.com> stable inclusion from stable-v5.10.148 commit 377c60dd32d3289788bdb3d8840382f79d42139b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 70cbc3cc78a997d8247b50389d37c4e1736019da upstream. Since general RCU GUP fast was introduced in commit 2667f50e8b81 ("mm: introduce a general RCU get_user_pages_fast()"), a TLB flush is no longer sufficient to handle concurrent GUP-fast in all cases, it only handles traditional IPI-based GUP-fast correctly. On architectures that send an IPI broadcast on TLB flush, it works as expected. But on the architectures that do not use IPI to broadcast TLB flush, it may have the below race: CPU A CPU B THP collapse fast GUP gup_pmd_range() <-- see valid pmd gup_pte_range() <-- work on pte pmdp_collapse_flush() <-- clear pmd and flush __collapse_huge_page_isolate() check page pinned <-- before GUP bump refcount pin the page check PTE <-- no change __collapse_huge_page_copy() copy data to huge page ptep_clear() install huge pmd for the huge page return the stale page discard the stale page The race can be fixed by checking whether PMD is changed or not after taking the page pin in fast GUP, just like what it does for PTE. If the PMD is changed it means there may be parallel THP collapse, so GUP should back off. Also update the stale comment about serializing against fast GUP in khugepaged. Link: https://lkml.kernel.org/r/20220907180144.555485-1-shy828301@gmail.com Fixes: 2667f50e8b81 ("mm: introduce a general RCU get_user_pages_fast()") Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Signed-off-by: Yang Shi <shy828301@gmail.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- mm/gup.c | 34 ++++++++++++++++++++++++++++------ mm/khugepaged.c | 10 ++++++---- 2 files changed, 34 insertions(+), 10 deletions(-) diff --git a/mm/gup.c b/mm/gup.c index 606b4a61e6ba..f773ea191c2e 100644 --- a/mm/gup.c +++ b/mm/gup.c @@ -2231,8 +2231,28 @@ static void __maybe_unused undo_dev_pagemap(int *nr, int nr_start, } #ifdef CONFIG_ARCH_HAS_PTE_SPECIAL -static int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end, - unsigned int flags, struct page **pages, int *nr) +/* + * Fast-gup relies on pte change detection to avoid concurrent pgtable + * operations. + * + * To pin the page, fast-gup needs to do below in order: + * (1) pin the page (by prefetching pte), then (2) check pte not changed. + * + * For the rest of pgtable operations where pgtable updates can be racy + * with fast-gup, we need to do (1) clear pte, then (2) check whether page + * is pinned. + * + * Above will work for all pte-level operations, including THP split. + * + * For THP collapse, it's a bit more complicated because fast-gup may be + * walking a pgtable page that is being freed (pte is still valid but pmd + * can be cleared already). To avoid race in such condition, we need to + * also check pmd here to make sure pmd doesn't change (corresponds to + * pmdp_collapse_flush() in the THP collapse code path). + */ +static int gup_pte_range(pmd_t pmd, pmd_t *pmdp, unsigned long addr, + unsigned long end, unsigned int flags, + struct page **pages, int *nr) { struct dev_pagemap *pgmap = NULL; int nr_start = *nr, ret = 0; @@ -2272,7 +2292,8 @@ static int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end, if (!head) goto pte_unmap; - if (unlikely(pte_val(pte) != pte_val(*ptep))) { + if (unlikely(pmd_val(pmd) != pmd_val(*pmdp)) || + unlikely(pte_val(pte) != pte_val(*ptep))) { put_compound_head(head, 1, flags); goto pte_unmap; } @@ -2317,8 +2338,9 @@ static int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end, * get_user_pages_fast_only implementation that can pin pages. Thus it's still * useful to have gup_huge_pmd even if we can't operate on ptes. */ -static int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end, - unsigned int flags, struct page **pages, int *nr) +static int gup_pte_range(pmd_t pmd, pmd_t *pmdp, unsigned long addr, + unsigned long end, unsigned int flags, + struct page **pages, int *nr) { return 0; } @@ -2627,7 +2649,7 @@ static int gup_pmd_range(pud_t *pudp, pud_t pud, unsigned long addr, unsigned lo if (!gup_huge_pd(__hugepd(pmd_val(pmd)), addr, PMD_SHIFT, next, flags, pages, nr)) return 0; - } else if (!gup_pte_range(pmd, addr, next, flags, pages, nr)) + } else if (!gup_pte_range(pmd, pmdp, addr, next, flags, pages, nr)) return 0; } while (pmdp++, addr = next, addr != end); diff --git a/mm/khugepaged.c b/mm/khugepaged.c index aaef16aa8945..dde44ff560e4 100644 --- a/mm/khugepaged.c +++ b/mm/khugepaged.c @@ -1150,10 +1150,12 @@ static void collapse_huge_page(struct mm_struct *mm, pmd_ptl = pmd_lock(mm, pmd); /* probably unnecessary */ /* - * After this gup_fast can't run anymore. This also removes - * any huge TLB entry from the CPU so we won't allow - * huge and small TLB entries for the same virtual address - * to avoid the risk of CPU bugs in that area. + * This removes any huge TLB entry from the CPU so we won't allow + * huge and small TLB entries for the same virtual address to + * avoid the risk of CPU bugs in that area. + * + * Parallel fast GUP is fine since fast GUP will back off when + * it detects PMD is changed. */ _pmd = pmdp_collapse_flush(vma, address, pmd); spin_unlock(pmd_ptl); -- 2.25.1
From: Yang Shi <shy828301@gmail.com> stable inclusion from stable-v5.10.148 commit acf05d61d39b3d0cae74cd5707cfb743975d247e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit bedf03416913d88c796288f9dca109a53608c745 upstream. The IPI broadcast is used to serialize against fast-GUP, but fast-GUP will move to use RCU instead of disabling local interrupts in fast-GUP. Using an IPI is the old-styled way of serializing against fast-GUP although it still works as expected now. And fast-GUP now fixed the potential race with THP collapse by checking whether PMD is changed or not. So IPI broadcast in radix pmd collapse flush is not necessary anymore. But it is still needed for hash TLB. Link: https://lkml.kernel.org/r/20220907180144.555485-2-shy828301@gmail.com Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Yang Shi <shy828301@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/powerpc/mm/book3s64/radix_pgtable.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c index 10fd67f79e0b..1b11081ac9d5 100644 --- a/arch/powerpc/mm/book3s64/radix_pgtable.c +++ b/arch/powerpc/mm/book3s64/radix_pgtable.c @@ -997,15 +997,6 @@ pmd_t radix__pmdp_collapse_flush(struct vm_area_struct *vma, unsigned long addre pmd = *pmdp; pmd_clear(pmdp); - /* - * pmdp collapse_flush need to ensure that there are no parallel gup - * walk after this call. This is needed so that we can have stable - * page ref count when collapsing a page. We don't allow a collapse page - * if we have gup taken on the page. We can ensure that by sending IPI - * because gup walk happens with IRQ disabled. - */ - serialize_against_pte_lookup(vma->vm_mm); - radix__flush_tlb_collapsed_pmd(vma->vm_mm, address); return pmd; -- 2.25.1
From: Nick Desaulniers <ndesaulniers@google.com> stable inclusion from stable-v5.10.148 commit 6df7c6d141ec3643901f67d2537203cf073d358f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit b83a908498d68fafca931e1276e145b339cac5fb upstream. Clang 14 will add support for __attribute__((__error__(""))) and __attribute__((__warning__(""))). To make use of these in __compiletime_error and __compiletime_warning (as used by BUILD_BUG and friends) for newer clang and detect/fallback for older versions of clang, move these to compiler_attributes.h and guard them with __has_attribute preprocessor guards. Link: https://reviews.llvm.org/D106030 Link: https://bugs.llvm.org/show_bug.cgi?id=16428 Link: https://github.com/ClangBuiltLinux/linux/issues/1173 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> [Reworded, landed in Clang 14] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- include/linux/compiler-gcc.h | 3 --- include/linux/compiler_attributes.h | 24 ++++++++++++++++++++++++ include/linux/compiler_types.h | 6 ------ 3 files changed, 24 insertions(+), 9 deletions(-) diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 4cf524ccab43..ae2de4e1cd6f 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -54,9 +54,6 @@ #define __compiletime_object_size(obj) __builtin_object_size(obj, 0) -#define __compiletime_warning(message) __attribute__((__warning__(message))) -#define __compiletime_error(message) __attribute__((__error__(message))) - #if defined(LATENT_ENTROPY_PLUGIN) && !defined(__CHECKER__) #define __latent_entropy __attribute__((latent_entropy)) #endif diff --git a/include/linux/compiler_attributes.h b/include/linux/compiler_attributes.h index b2a3f4f641a7..08eb06301791 100644 --- a/include/linux/compiler_attributes.h +++ b/include/linux/compiler_attributes.h @@ -30,6 +30,7 @@ # define __GCC4_has_attribute___assume_aligned__ (__GNUC_MINOR__ >= 9) # define __GCC4_has_attribute___copy__ 0 # define __GCC4_has_attribute___designated_init__ 0 +# define __GCC4_has_attribute___error__ 1 # define __GCC4_has_attribute___externally_visible__ 1 # define __GCC4_has_attribute___no_caller_saved_registers__ 0 # define __GCC4_has_attribute___noclone__ 1 @@ -37,6 +38,7 @@ # define __GCC4_has_attribute___no_sanitize_address__ (__GNUC_MINOR__ >= 8) # define __GCC4_has_attribute___no_sanitize_undefined__ (__GNUC_MINOR__ >= 9) # define __GCC4_has_attribute___fallthrough__ 0 +# define __GCC4_has_attribute___warning__ 1 #endif /* @@ -136,6 +138,17 @@ # define __designated_init #endif +/* + * Optional: only supported since clang >= 14.0 + * + * gcc: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-err... + */ +#if __has_attribute(__error__) +# define __compiletime_error(msg) __attribute__((__error__(msg))) +#else +# define __compiletime_error(msg) +#endif + /* * Optional: not supported by clang * @@ -272,6 +285,17 @@ */ #define __used __attribute__((__used__)) +/* + * Optional: only supported since clang >= 14.0 + * + * gcc: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-war... + */ +#if __has_attribute(__warning__) +# define __compiletime_warning(msg) __attribute__((__warning__(msg))) +#else +# define __compiletime_warning(msg) +#endif + /* * gcc: https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html#index-wea... * gcc: https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html#index-wea... diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 273609a314c7..84d0900a9562 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -289,12 +289,6 @@ struct ftrace_likely_data { #ifndef __compiletime_object_size # define __compiletime_object_size(obj) -1 #endif -#ifndef __compiletime_warning -# define __compiletime_warning(message) -#endif -#ifndef __compiletime_error -# define __compiletime_error(message) -#endif #ifdef __OPTIMIZE__ # define __compiletime_assert(condition, msg, prefix, suffix) \ -- 2.25.1
From: Cristian Marussi <cristian.marussi@arm.com> stable inclusion from stable-v5.10.148 commit 64e240934c311ddfdbd3ce38276a2d7e9fdf17d7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit dea796fcab0a219830831c070b8dc367d7e0f708 ] Currently, when removing the SCMI PM driver not all the resources registered with genpd subsystem are properly de-registered. As a side effect of this after a driver unload/load cycle you get a splat with a few warnings like this: | debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present! | debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present! | debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present! | debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present! | debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present! | debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present! Add a proper scmi_pm_domain_remove callback to the driver in order to take care of all the needed cleanups not handled by devres framework. Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/firmware/arm_scmi/scmi_pm_domain.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c index a4e4aa9a3542..af74e521f89f 100644 --- a/drivers/firmware/arm_scmi/scmi_pm_domain.c +++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c @@ -106,9 +106,28 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev) scmi_pd_data->domains = domains; scmi_pd_data->num_domains = num_domains; + dev_set_drvdata(dev, scmi_pd_data); + return of_genpd_add_provider_onecell(np, scmi_pd_data); } +static void scmi_pm_domain_remove(struct scmi_device *sdev) +{ + int i; + struct genpd_onecell_data *scmi_pd_data; + struct device *dev = &sdev->dev; + struct device_node *np = dev->of_node; + + of_genpd_del_provider(np); + + scmi_pd_data = dev_get_drvdata(dev); + for (i = 0; i < scmi_pd_data->num_domains; i++) { + if (!scmi_pd_data->domains[i]) + continue; + pm_genpd_remove(scmi_pd_data->domains[i]); + } +} + static const struct scmi_device_id scmi_id_table[] = { { SCMI_PROTOCOL_POWER, "genpd" }, { }, @@ -118,6 +137,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table); static struct scmi_driver scmi_power_domain_driver = { .name = "scmi-power-domain", .probe = scmi_pm_domain_probe, + .remove = scmi_pm_domain_remove, .id_table = scmi_id_table, }; module_scmi_driver(scmi_power_domain_driver); -- 2.25.1
From: Swati Agarwal <swati.agarwal@xilinx.com> stable inclusion from stable-v5.10.148 commit 789e590cb8c4021de0c1ec0fcdae7e4615e4f3e7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 91df7751eb890e970afc08f50b8f0fa5ea39e03d ] Add missing cleanup in devm_platform_ioremap_resource(). When probe fails remove dma channel resources and disable clocks in accordance with the order of resources allocated . Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com> Link: https://lore.kernel.org/r/20220817061125.4720-2-swati.agarwal@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/dma/xilinx/xilinx_dma.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index cab4719e4cf9..36801126312e 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -3020,9 +3020,10 @@ static int xilinx_dma_probe(struct platform_device *pdev) /* Request and map I/O memory */ xdev->regs = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(xdev->regs)) - return PTR_ERR(xdev->regs); - + if (IS_ERR(xdev->regs)) { + err = PTR_ERR(xdev->regs); + goto disable_clks; + } /* Retrieve the DMA engine properties from the device tree */ xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0); xdev->s2mm_chan_id = xdev->dma_config->max_channels / 2; @@ -3115,7 +3116,7 @@ static int xilinx_dma_probe(struct platform_device *pdev) for_each_child_of_node(node, child) { err = xilinx_dma_child_probe(xdev, child); if (err < 0) - goto disable_clks; + goto error; } if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) { @@ -3150,12 +3151,12 @@ static int xilinx_dma_probe(struct platform_device *pdev) return 0; -disable_clks: - xdma_disable_allclks(xdev); error: for (i = 0; i < xdev->dma_config->max_channels; i++) if (xdev->chan[i]) xilinx_dma_chan_remove(xdev->chan[i]); +disable_clks: + xdma_disable_allclks(xdev); return err; } -- 2.25.1
From: Swati Agarwal <swati.agarwal@xilinx.com> stable inclusion from stable-v5.10.148 commit e0ca2998dfba40bcc504ca6a4f55d2599a38ae4a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 462bce790e6a7e68620a4ce260cc38f7ed0255d5 ] Free the allocated resources for missing xlnx,num-fstores property. Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com> Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/dma/xilinx/xilinx_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index 36801126312e..b91378fb891c 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -3051,7 +3051,7 @@ static int xilinx_dma_probe(struct platform_device *pdev) if (err < 0) { dev_err(xdev->dev, "missing xlnx,num-fstores property\n"); - return err; + goto disable_clks; } err = of_property_read_u32(node, "xlnx,flush-fsync", -- 2.25.1
From: Swati Agarwal <swati.agarwal@xilinx.com> stable inclusion from stable-v5.10.148 commit dae0b77cb8b2d3c61819de7bde620c58cb48f9c2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 8f2b6bc79c32f0fa60df000ae387a790ec80eae9 ] The driver does not handle the failure case while calling dma_set_mask_and_coherent API. In case of failure, capture the return value of API and then report an error. Addresses-coverity: Unchecked return value (CHECKED_RETURN) Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/dma/xilinx/xilinx_dma.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index b91378fb891c..e76adc31ab66 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -3071,7 +3071,11 @@ static int xilinx_dma_probe(struct platform_device *pdev) xdev->ext_addr = false; /* Set the dma mask bits */ - dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width)); + err = dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width)); + if (err < 0) { + dev_err(xdev->dev, "DMA mask error %d\n", err); + goto disable_clks; + } /* Initialize the DMA engine */ xdev->common.dev = &pdev->dev; -- 2.25.1
From: Sergei Antonov <saproj@gmail.com> stable inclusion from stable-v5.10.148 commit 29461bbe2d7f79c691476dd69156bc5951ee1aeb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 02181e68275d28cab3c3f755852770367f1bc229 ] Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc". But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt contain compatible = "moxa,moxart-sdhci". Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver. Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different controller from FTSDC010. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Jonas Jensen <jonas.jensen@gmail.com> Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt | 4 ++-- arch/arm/boot/dts/moxart-uc7112lx.dts | 2 +- arch/arm/boot/dts/moxart.dtsi | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt index 8a9f3559335b..7e14e26676ec 100644 --- a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt +++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt @@ -34,8 +34,8 @@ Example: Use specific request line passing from dma For example, MMC request line is 5 - sdhci: sdhci@98e00000 { - compatible = "moxa,moxart-sdhci"; + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; reg = <0x98e00000 0x5C>; interrupts = <5 0>; clocks = <&clk_apb>; diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts index eb5291b0ee3a..e07b807b4cec 100644 --- a/arch/arm/boot/dts/moxart-uc7112lx.dts +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -79,7 +79,7 @@ &clk_pll { clocks = <&ref12>; }; -&sdhci { +&mmc { status = "okay"; }; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi index f5f070a87482..764832ddfa78 100644 --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -93,8 +93,8 @@ watchdog: watchdog@98500000 { clock-names = "PCLK"; }; - sdhci: sdhci@98e00000 { - compatible = "moxa,moxart-sdhci"; + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; reg = <0x98e00000 0x5C>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_apb>; -- 2.25.1
From: Letu Ren <fantasquex@gmail.com> stable inclusion from stable-v5.10.148 commit 034b30c311461a661de6da14c417e246179bb130 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ] In __qedf_probe(), if qedf->cdev is NULL which means qed_ops->common->probe() failed, then the program will goto label err1, and scsi_host_put() will free lport->host pointer. Because the memory qedf points to is allocated by libfc_host_alloc(), it will be freed by scsi_host_put(). However, the if statement below label err0 only checks whether qedf is NULL but doesn't check whether the memory has been freed. So a UAF bug can occur. There are two ways to reach the statements below err0. The first one is described as before, "qedf" should be set to NULL. The second one is goto "err0" directly. In the latter scenario qedf hasn't been changed and it has the initial value NULL. As a result the if statement is not reachable in any situation. The KASAN logs are as follows: [ 2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] [ 2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 2.312969] Call Trace: [ 2.312969] dump_stack_lvl+0x59/0x7b [ 2.312969] print_address_description+0x7c/0x3b0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] __kasan_report+0x160/0x1c0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] kasan_report+0x4b/0x70 [ 2.312969] ? kobject_put+0x25d/0x290 [ 2.312969] kasan_check_range+0x2ca/0x310 [ 2.312969] __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] ? selinux_kernfs_init_security+0xdc/0x5f0 [ 2.312969] ? trace_rpm_return_int_rcuidle+0x18/0x120 [ 2.312969] ? rpm_resume+0xa5c/0x16e0 [ 2.312969] ? qedf_get_generic_tlv_data+0x160/0x160 [ 2.312969] local_pci_probe+0x13c/0x1f0 [ 2.312969] pci_device_probe+0x37e/0x6c0 Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com Reported-by: Zheyu Ma <zheyuma97@gmail.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Co-developed-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Wende Tan <twd2.me@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/scsi/qedf/qedf_main.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index e64457f53da8..de5b6453827c 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3671,11 +3671,6 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) err1: scsi_host_put(lport->host); err0: - if (qedf) { - QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe done.\n"); - - clear_bit(QEDF_PROBING, &qedf->flags); - } return rc; } -- 2.25.1
From: Haimin Zhang <tcs.kernel@gmail.com> stable inclusion from stable-v5.10.148 commit c1337f8ea8619404b08a5dec837df5643a3fd5c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 94160108a70c8af17fa1484a37e05181c0e094af ] There is uninit value bug in dgram_sendmsg function in net/ieee802154/socket.c when the length of valid data pointed by the msg->msg_name isn't verified. We introducing a helper function ieee802154_sockaddr_check_size to check namelen. First we check there is addr_type in ieee802154_addr_sa. Then, we check namelen according to addr_type. Also fixed in raw_bind, dgram_bind, dgram_connect. Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- include/net/ieee802154_netdev.h | 37 +++++++++++++++++++++++++++++ net/ieee802154/socket.c | 42 ++++++++++++++++++--------------- 2 files changed, 60 insertions(+), 19 deletions(-) diff --git a/include/net/ieee802154_netdev.h b/include/net/ieee802154_netdev.h index d0d188c3294b..a8994f307fc3 100644 --- a/include/net/ieee802154_netdev.h +++ b/include/net/ieee802154_netdev.h @@ -15,6 +15,22 @@ #ifndef IEEE802154_NETDEVICE_H #define IEEE802154_NETDEVICE_H +#define IEEE802154_REQUIRED_SIZE(struct_type, member) \ + (offsetof(typeof(struct_type), member) + \ + sizeof(((typeof(struct_type) *)(NULL))->member)) + +#define IEEE802154_ADDR_OFFSET \ + offsetof(typeof(struct sockaddr_ieee802154), addr) + +#define IEEE802154_MIN_NAMELEN (IEEE802154_ADDR_OFFSET + \ + IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, addr_type)) + +#define IEEE802154_NAMELEN_SHORT (IEEE802154_ADDR_OFFSET + \ + IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, short_addr)) + +#define IEEE802154_NAMELEN_LONG (IEEE802154_ADDR_OFFSET + \ + IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, hwaddr)) + #include <net/af_ieee802154.h> #include <linux/netdevice.h> #include <linux/skbuff.h> @@ -165,6 +181,27 @@ static inline void ieee802154_devaddr_to_raw(void *raw, __le64 addr) memcpy(raw, &temp, IEEE802154_ADDR_LEN); } +static inline int +ieee802154_sockaddr_check_size(struct sockaddr_ieee802154 *daddr, int len) +{ + struct ieee802154_addr_sa *sa; + + sa = &daddr->addr; + if (len < IEEE802154_MIN_NAMELEN) + return -EINVAL; + switch (sa->addr_type) { + case IEEE802154_ADDR_SHORT: + if (len < IEEE802154_NAMELEN_SHORT) + return -EINVAL; + break; + case IEEE802154_ADDR_LONG: + if (len < IEEE802154_NAMELEN_LONG) + return -EINVAL; + break; + } + return 0; +} + static inline void ieee802154_addr_from_sa(struct ieee802154_addr *a, const struct ieee802154_addr_sa *sa) { diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c index c25f7617770c..7edec210780a 100644 --- a/net/ieee802154/socket.c +++ b/net/ieee802154/socket.c @@ -201,8 +201,9 @@ static int raw_bind(struct sock *sk, struct sockaddr *_uaddr, int len) int err = 0; struct net_device *dev = NULL; - if (len < sizeof(*uaddr)) - return -EINVAL; + err = ieee802154_sockaddr_check_size(uaddr, len); + if (err < 0) + return err; uaddr = (struct sockaddr_ieee802154 *)_uaddr; if (uaddr->family != AF_IEEE802154) @@ -494,7 +495,8 @@ static int dgram_bind(struct sock *sk, struct sockaddr *uaddr, int len) ro->bound = 0; - if (len < sizeof(*addr)) + err = ieee802154_sockaddr_check_size(addr, len); + if (err < 0) goto out; if (addr->family != AF_IEEE802154) @@ -565,8 +567,9 @@ static int dgram_connect(struct sock *sk, struct sockaddr *uaddr, struct dgram_sock *ro = dgram_sk(sk); int err = 0; - if (len < sizeof(*addr)) - return -EINVAL; + err = ieee802154_sockaddr_check_size(addr, len); + if (err < 0) + return err; if (addr->family != AF_IEEE802154) return -EINVAL; @@ -605,6 +608,7 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size) struct ieee802154_mac_cb *cb; struct dgram_sock *ro = dgram_sk(sk); struct ieee802154_addr dst_addr; + DECLARE_SOCKADDR(struct sockaddr_ieee802154*, daddr, msg->msg_name); int hlen, tlen; int err; @@ -613,10 +617,20 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size) return -EOPNOTSUPP; } - if (!ro->connected && !msg->msg_name) - return -EDESTADDRREQ; - else if (ro->connected && msg->msg_name) - return -EISCONN; + if (msg->msg_name) { + if (ro->connected) + return -EISCONN; + if (msg->msg_namelen < IEEE802154_MIN_NAMELEN) + return -EINVAL; + err = ieee802154_sockaddr_check_size(daddr, msg->msg_namelen); + if (err < 0) + return err; + ieee802154_addr_from_sa(&dst_addr, &daddr->addr); + } else { + if (!ro->connected) + return -EDESTADDRREQ; + dst_addr = ro->dst_addr; + } if (!ro->bound) dev = dev_getfirstbyhwtype(sock_net(sk), ARPHRD_IEEE802154); @@ -652,16 +666,6 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size) cb = mac_cb_init(skb); cb->type = IEEE802154_FC_TYPE_DATA; cb->ackreq = ro->want_ack; - - if (msg->msg_name) { - DECLARE_SOCKADDR(struct sockaddr_ieee802154*, - daddr, msg->msg_name); - - ieee802154_addr_from_sa(&dst_addr, &daddr->addr); - } else { - dst_addr = ro->dst_addr; - } - cb->secen = ro->secen; cb->secen_override = ro->secen_override; cb->seclevel = ro->seclevel; -- 2.25.1
From: Jaroslav Kysela <perex@perex.cz> stable inclusion from stable-v5.10.148 commit 6d7a47e84913a962e88a44a53ac162e6f729c692 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 5f80d6bd2b01de4cafac3302f58456bf860322fc ] When the user space pcm stream uses the silent stream converter, it is no longer allocated for the silent stream. Clear the appropriate flag in the hdmi_pcm_open() function. The silent stream setup may be applied in hdmi_pcm_close() (and the error path - open fcn) again. If the flag is not cleared, the reuse conditions for the silent stream converter in hdmi_choose_cvt() may improperly share this converter. Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 7ca4c5a37b57..a5f3bca4e7a3 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1269,6 +1269,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, set_bit(pcm_idx, &spec->pcm_in_use); per_pin = get_pin(spec, pin_idx); per_pin->cvt_nid = per_cvt->cvt_nid; + per_pin->silent_stream = false; hinfo->nid = per_cvt->cvt_nid; /* flip stripe flag for the assigned stream if supported */ -- 2.25.1
From: Lukas Straub <lukasstraub2@web.de> stable inclusion from stable-v5.10.148 commit 6d4deaba063d3dc6c41ccd86f076fefdd8b34f81 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 61670b4d270c71219def1fbc9441debc2ac2e6e9 ] Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9 "um: Cleanup syscall_handler_t definition/cast, fix warning", remove the cast to to fix the compiler warning. Signed-off-by: Lukas Straub <lukasstraub2@web.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/x86/um/shared/sysdep/syscalls_32.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/um/shared/sysdep/syscalls_32.h b/arch/x86/um/shared/sysdep/syscalls_32.h index 68fd2cf526fd..f6e9f84397e7 100644 --- a/arch/x86/um/shared/sysdep/syscalls_32.h +++ b/arch/x86/um/shared/sysdep/syscalls_32.h @@ -6,10 +6,9 @@ #include <asm/unistd.h> #include <sysdep/ptrace.h> -typedef long syscall_handler_t(struct pt_regs); +typedef long syscall_handler_t(struct syscall_args); extern syscall_handler_t *sys_call_table[]; #define EXECUTE_SYSCALL(syscall, regs) \ - ((long (*)(struct syscall_args)) \ - (*sys_call_table[syscall]))(SYSCALL_ARGS(®s->regs)) + ((*sys_call_table[syscall]))(SYSCALL_ARGS(®s->regs)) -- 2.25.1
From: Lukas Straub <lukasstraub2@web.de> stable inclusion from stable-v5.10.148 commit aeb8315593a6441bc21061a292cb149d5a64700e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d27fff3499671dc23a08efd01cdb8b3764a391c4 ] arch.tls_array is statically allocated so checking for NULL doesn't make sense. This causes the compiler warning below. Remove the checks to silence these warnings. ../arch/x86/um/tls_32.c: In function 'get_free_idx': ../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress] 68 | if (!t->arch.tls_array) | ^ In file included from ../arch/x86/um/asm/processor.h:10, from ../include/linux/rcupdate.h:30, from ../include/linux/rculist.h:11, from ../include/linux/pid.h:5, from ../include/linux/sched.h:14, from ../arch/x86/um/tls_32.c:7: ../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here 22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; | ^~~~~~~~~ ../arch/x86/um/tls_32.c: In function 'get_tls_entry': ../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress] 243 | if (!t->arch.tls_array) | ^ ../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here 22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; | ^~~~~~~~~ Signed-off-by: Lukas Straub <lukasstraub2@web.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/x86/um/tls_32.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/x86/um/tls_32.c b/arch/x86/um/tls_32.c index ac8eee093f9c..66162eafd8e8 100644 --- a/arch/x86/um/tls_32.c +++ b/arch/x86/um/tls_32.c @@ -65,9 +65,6 @@ static int get_free_idx(struct task_struct* task) struct thread_struct *t = &task->thread; int idx; - if (!t->arch.tls_array) - return GDT_ENTRY_TLS_MIN; - for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++) if (!t->arch.tls_array[idx].present) return idx + GDT_ENTRY_TLS_MIN; @@ -240,9 +237,6 @@ static int get_tls_entry(struct task_struct *task, struct user_desc *info, { struct thread_struct *t = &task->thread; - if (!t->arch.tls_array) - goto clear; - if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX) return -EINVAL; -- 2.25.1
From: David Gow <davidgow@google.com> stable inclusion from stable-v5.10.148 commit 3287f0d7271052921b1436062c371ba4341dadd5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit bd71558d585ac61cfd799db7f25e78dca404dd7a ] Since binutils 2.39, ld will print a warning if any stack section is executable, which is the default for stack sections on files without a .note.GNU-stack section. This was fixed for x86 in commit ffcf9c5700e4 ("x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments"), but remained broken for UML, resulting in several warnings: /usr/bin/ld: warning: arch/x86/um/vdso/vdso.o: missing .note.GNU-stack section implies executable stack /usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker /usr/bin/ld: warning: .tmp_vmlinux.kallsyms1 has a LOAD segment with RWX permissions /usr/bin/ld: warning: .tmp_vmlinux.kallsyms1.o: missing .note.GNU-stack section implies executable stack /usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker /usr/bin/ld: warning: .tmp_vmlinux.kallsyms2 has a LOAD segment with RWX permissions /usr/bin/ld: warning: .tmp_vmlinux.kallsyms2.o: missing .note.GNU-stack section implies executable stack /usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker /usr/bin/ld: warning: vmlinux has a LOAD segment with RWX permissions Link both the VDSO and vmlinux with -z noexecstack, fixing the warnings about .note.GNU-stack sections. In addition, pass --no-warn-rwx-segments to dodge the remaining warnings about LOAD segments with RWX permissions in the kallsyms objects. (Note that this flag is apparently not available on lld, so hide it behind a test for BFD, which is what the x86 patch does.) Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a... Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Lukas Straub <lukasstraub2@web.de> Tested-by: Lukas Straub <lukasstraub2@web.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/um/Makefile | 8 ++++++++ arch/x86/um/vdso/Makefile | 2 +- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/um/Makefile b/arch/um/Makefile index 1cea46ff9bb7..775615141339 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -131,10 +131,18 @@ export LDS_ELF_FORMAT := $(ELF_FORMAT) # The wrappers will select whether using "malloc" or the kernel allocator. LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc +# Avoid binutils 2.39+ warnings by marking the stack non-executable and +# ignorning warnings for the kallsyms sections. +LDFLAGS_EXECSTACK = -z noexecstack +ifeq ($(CONFIG_LD_IS_BFD),y) +LDFLAGS_EXECSTACK += $(call ld-option,--no-warn-rwx-segments) +endif + LD_FLAGS_CMDLINE = $(foreach opt,$(KBUILD_LDFLAGS),-Wl,$(opt)) # Used by link-vmlinux.sh which has special support for um link export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE) +export LDFLAGS_vmlinux := $(LDFLAGS_EXECSTACK) # When cleaning we don't include .config, so we don't include # TT or skas makefiles and don't clean skas_ptregs.h. diff --git a/arch/x86/um/vdso/Makefile b/arch/x86/um/vdso/Makefile index 5943387e3f35..5ca366e15c76 100644 --- a/arch/x86/um/vdso/Makefile +++ b/arch/x86/um/vdso/Makefile @@ -62,7 +62,7 @@ quiet_cmd_vdso = VDSO $@ -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \ sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@' -VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv +VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv -z noexecstack GCOV_PROFILE := n # -- 2.25.1
From: Jianglei Nie <niejianglei2021@163.com> stable inclusion from stable-v5.10.148 commit 73e1b27b58a6f5aa5a4955795a57d1613e58a61d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 65e5d27df61283e5390f04b09dc79cd832f95607 ] If aq_nic_stop() fails, aq_ndev_close() returns err without calling aq_nic_deinit() to release the relevant memory and resource, which will lead to a memory leak. We can fix it by deleting the if condition judgment and goto statement to call aq_nic_deinit() directly after aq_nic_stop() to fix the memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/ethernet/aquantia/atlantic/aq_main.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c index 4af0cd9530de..ff245f75fa3d 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c @@ -89,11 +89,8 @@ static int aq_ndev_close(struct net_device *ndev) int err = 0; err = aq_nic_stop(aq_nic); - if (err < 0) - goto err_exit; aq_nic_deinit(aq_nic, true); -err_exit: return err; } -- 2.25.1
From: Hugo Hu <hugo.hu@amd.com> stable inclusion from stable-v5.10.148 commit a6fe179ba03f621fb308b8c9542aa77b83796542 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 52bb21499cf54fa65b56d97cd0d68579c90207dd ] [Why] The desktop plane and full-screen game plane may have different gamut remap coefficients, if switching between desktop and full-screen game without updating the gamut remap will cause incorrect color. [How] Update gamut remap if planes change. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Hugo Hu <hugo.hu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c index 3d778760a3b5..8f66eef0c683 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c @@ -1481,6 +1481,7 @@ static void dcn20_update_dchubp_dpp( /* Any updates are handled in dc interface, just need * to apply existing for plane enable / opp change */ if (pipe_ctx->update_flags.bits.enable || pipe_ctx->update_flags.bits.opp_changed + || pipe_ctx->update_flags.bits.plane_changed || pipe_ctx->stream->update_flags.bits.gamut_remap || pipe_ctx->stream->update_flags.bits.out_csc) { #if defined(CONFIG_DRM_AMD_DC_DCN3_0) -- 2.25.1
From: zhikzhai <zhikai.zhai@amd.com> stable inclusion from stable-v5.10.148 commit 4f32f266b108fd7e6eb4f42bd7c87bad393e30cd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 65fbfb02c2734cacffec5e3f492e1b4f1dabcf98 ] [why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: zhikzhai <zhikai.zhai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 3ac6c7b65a45..e33fe0207b9e 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -2047,7 +2047,8 @@ static void dce110_setup_audio_dto( continue; if (pipe_ctx->stream->signal != SIGNAL_TYPE_HDMI_TYPE_A) continue; - if (pipe_ctx->stream_res.audio != NULL) { + if (pipe_ctx->stream_res.audio != NULL && + pipe_ctx->stream_res.audio->enabled == false) { struct audio_output audio_output; build_audio_output(context, pipe_ctx, &audio_output); @@ -2075,7 +2076,8 @@ static void dce110_setup_audio_dto( if (!dc_is_dp_signal(pipe_ctx->stream->signal)) continue; - if (pipe_ctx->stream_res.audio != NULL) { + if (pipe_ctx->stream_res.audio != NULL && + pipe_ctx->stream_res.audio->enabled == false) { struct audio_output audio_output; build_audio_output(context, pipe_ctx, &audio_output); -- 2.25.1
From: ChanWoo Lee <cw9316.lee@samsung.com> stable inclusion from stable-v5.10.148 commit 0684658366527f206b0812305d94087e40404dca category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e427266460826bea21b70f9b2bb29decfb2c2620 ] SD_ROCR_S18A is already defined and is used to check the rocr value, so let's replace with already defined values for readability. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220706004840.24812-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Stable-dep-of: e9233917a7e5 ("mmc: core: Terminate infinite loop in SD-UHS voltage switch") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/mmc/core/sd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 899768ed1688..e2c34aa390f1 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -853,7 +853,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr) * the CCS bit is set as well. We deliberately deviate from the spec in * regards to this, which allows UHS-I to be supported for SDSC cards. */ - if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) { + if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) { err = mmc_set_uhs_voltage(host, pocr); if (err == -EAGAIN) { retries--; -- 2.25.1
From: Brian Norris <briannorris@chromium.org> stable inclusion from stable-v5.10.148 commit 3ba555d8e12fd9b3b3784fd9baf9ed4e6a584d72 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit e9233917a7e53980664efbc565888163c0a33c3f ] This loop intends to retry a max of 10 times, with some implicit termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the termination condition depends on the value reported by the SD card (*rocr), which may or may not correctly reflect what we asked it to do. Needless to say, it's not wise to rely on the card doing what we expect; we should at least terminate the loop regardless. So, check both the input and output values, so we ensure we will terminate regardless of the SD card behavior. Note that SDIO learned a similar retry loop in commit 0797e5f1453b ("mmc: core: Fixup signal voltage switch"), but that used the 'ocr' result, and so the current pre-terminating condition looks like: rocr & ocr & R4_18V_PRESENT (i.e., it doesn't have the same bug.) This addresses a number of crash reports seen on ChromeOS that look like the following: ... // lots of repeated: ... <4>[13142.846061] mmc1: Skipping voltage switch <4>[13143.406087] mmc1: Skipping voltage switch <4>[13143.964724] mmc1: Skipping voltage switch <4>[13144.526089] mmc1: Skipping voltage switch <4>[13145.086088] mmc1: Skipping voltage switch <4>[13145.645941] mmc1: Skipping voltage switch <3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds. ... Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/mmc/core/sd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index e2c34aa390f1..868b121ce4f3 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -853,7 +853,8 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr) * the CCS bit is set as well. We deliberately deviate from the spec in * regards to this, which allows UHS-I to be supported for SDSC cards. */ - if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) { + if (!mmc_host_is_spi(host) && (ocr & SD_OCR_S18R) && + rocr && (*rocr & SD_ROCR_S18A)) { err = mmc_set_uhs_voltage(host, pocr); if (err == -EAGAIN) { retries--; -- 2.25.1
From: Johan Hovold <johan@kernel.org> stable inclusion from stable-v5.10.148 commit 3451df3a514cb97c6295f6c788511a6a62140709 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 7bd7ad3c310cd6766f170927381eea0aa6f46c69 upstream. The 300 bps rate of SIO devices has been mapped to 9600 bps since 2003... Let's fix the regression. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/ftdi_sio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5480bacba39f..3bfa395c3112 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1320,8 +1320,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, case 38400: div_value = ftdi_sio_b38400; break; case 57600: div_value = ftdi_sio_b57600; break; case 115200: div_value = ftdi_sio_b115200; break; - } /* baud */ - if (div_value == 0) { + default: dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n", __func__, baud); div_value = ftdi_sio_b9600; -- 2.25.1
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> stable inclusion from stable-v5.10.148 commit 0a49bfa8f82f036b648f955f3cd4238a76617142 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 766279a8f85df32345dbda03b102ca1ee3d5ddea upstream. The use of strncpy() is considered deprecated for NUL-terminated strings[1]. Replace strncpy() with strscpy_pad(), to keep existing pad-behavior of strncpy, similarly to commit 08de420a8014 ("rpmsg: glink: Replace strncpy() with strscpy_pad()"). This fixes W=1 warning: In function ‘qcom_glink_rx_close’, inlined from ‘qcom_glink_work’ at ../drivers/rpmsg/qcom_glink_native.c:1638:4: drivers/rpmsg/qcom_glink_native.c:1549:17: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation] 1549 | strncpy(chinfo.name, channel->name, sizeof(chinfo.name)); [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nu... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220519073330.7187-1-krzysztof.kozlowski@linaro.o... Signed-off-by: Andrew Chernyakov <acherniakov@astralinux.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/rpmsg/qcom_glink_native.c | 2 +- drivers/rpmsg/qcom_smd.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c index 4840886532ff..7cbed0310c09 100644 --- a/drivers/rpmsg/qcom_glink_native.c +++ b/drivers/rpmsg/qcom_glink_native.c @@ -1472,7 +1472,7 @@ static void qcom_glink_rx_close(struct qcom_glink *glink, unsigned int rcid) cancel_work_sync(&channel->intent_work); if (channel->rpdev) { - strncpy(chinfo.name, channel->name, sizeof(chinfo.name)); + strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name)); chinfo.src = RPMSG_ADDR_ANY; chinfo.dst = RPMSG_ADDR_ANY; diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c index 0b1e853d8c91..b5167ef93abf 100644 --- a/drivers/rpmsg/qcom_smd.c +++ b/drivers/rpmsg/qcom_smd.c @@ -1073,7 +1073,7 @@ static int qcom_smd_create_device(struct qcom_smd_channel *channel) /* Assign public information to the rpmsg_device */ rpdev = &qsdev->rpdev; - strncpy(rpdev->id.name, channel->name, RPMSG_NAME_SIZE); + strscpy_pad(rpdev->id.name, channel->name, RPMSG_NAME_SIZE); rpdev->src = RPMSG_ADDR_ANY; rpdev->dst = RPMSG_ADDR_ANY; @@ -1304,7 +1304,7 @@ static void qcom_channel_state_worker(struct work_struct *work) spin_unlock_irqrestore(&edge->channels_lock, flags); - strncpy(chinfo.name, channel->name, sizeof(chinfo.name)); + strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name)); chinfo.src = RPMSG_ADDR_ANY; chinfo.dst = RPMSG_ADDR_ANY; rpmsg_unregister_device(&edge->dev, &chinfo); -- 2.25.1
From: Sasha Levin <sashal@kernel.org> stable inclusion from stable-v5.10.148 commit c04b67c54472107d1b0df1463d2088533dfd7d8b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- This reverts commit 67c830a6de835a36b4e19fe4d968dbaf8dc4e9c6. Which was upstream commit 255584b138343d4a28c6d25bd82d04b09460d672. Reported as causing boot failures. Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/ti/clk-44xx.c | 210 +++++++++++++++++++------------------- drivers/clk/ti/clk-54xx.c | 160 ++++++++++++++--------------- drivers/clk/ti/clkctrl.c | 4 + 3 files changed, 189 insertions(+), 185 deletions(-) diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c index cbf9922d93d4..a38c92153979 100644 --- a/drivers/clk/ti/clk-44xx.c +++ b/drivers/clk/ti/clk-44xx.c @@ -56,7 +56,7 @@ static const struct omap_clkctrl_bit_data omap4_aess_bit_data[] __initconst = { }; static const char * const omap4_func_dmic_abe_gfclk_parents[] __initconst = { - "abe-clkctrl:0018:26", + "abe_cm:clk:0018:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -76,7 +76,7 @@ static const struct omap_clkctrl_bit_data omap4_dmic_bit_data[] __initconst = { }; static const char * const omap4_func_mcasp_abe_gfclk_parents[] __initconst = { - "abe-clkctrl:0020:26", + "abe_cm:clk:0020:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -89,7 +89,7 @@ static const struct omap_clkctrl_bit_data omap4_mcasp_bit_data[] __initconst = { }; static const char * const omap4_func_mcbsp1_gfclk_parents[] __initconst = { - "abe-clkctrl:0028:26", + "abe_cm:clk:0028:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -102,7 +102,7 @@ static const struct omap_clkctrl_bit_data omap4_mcbsp1_bit_data[] __initconst = }; static const char * const omap4_func_mcbsp2_gfclk_parents[] __initconst = { - "abe-clkctrl:0030:26", + "abe_cm:clk:0030:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -115,7 +115,7 @@ static const struct omap_clkctrl_bit_data omap4_mcbsp2_bit_data[] __initconst = }; static const char * const omap4_func_mcbsp3_gfclk_parents[] __initconst = { - "abe-clkctrl:0038:26", + "abe_cm:clk:0038:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -183,18 +183,18 @@ static const struct omap_clkctrl_bit_data omap4_timer8_bit_data[] __initconst = static const struct omap_clkctrl_reg_data omap4_abe_clkctrl_regs[] __initconst = { { OMAP4_L4_ABE_CLKCTRL, NULL, 0, "ocp_abe_iclk" }, - { OMAP4_AESS_CLKCTRL, omap4_aess_bit_data, CLKF_SW_SUP, "abe-clkctrl:0008:24" }, + { OMAP4_AESS_CLKCTRL, omap4_aess_bit_data, CLKF_SW_SUP, "abe_cm:clk:0008:24" }, { OMAP4_MCPDM_CLKCTRL, NULL, CLKF_SW_SUP, "pad_clks_ck" }, - { OMAP4_DMIC_CLKCTRL, omap4_dmic_bit_data, CLKF_SW_SUP, "abe-clkctrl:0018:24" }, - { OMAP4_MCASP_CLKCTRL, omap4_mcasp_bit_data, CLKF_SW_SUP, "abe-clkctrl:0020:24" }, - { OMAP4_MCBSP1_CLKCTRL, omap4_mcbsp1_bit_data, CLKF_SW_SUP, "abe-clkctrl:0028:24" }, - { OMAP4_MCBSP2_CLKCTRL, omap4_mcbsp2_bit_data, CLKF_SW_SUP, "abe-clkctrl:0030:24" }, - { OMAP4_MCBSP3_CLKCTRL, omap4_mcbsp3_bit_data, CLKF_SW_SUP, "abe-clkctrl:0038:24" }, - { OMAP4_SLIMBUS1_CLKCTRL, omap4_slimbus1_bit_data, CLKF_SW_SUP, "abe-clkctrl:0040:8" }, - { OMAP4_TIMER5_CLKCTRL, omap4_timer5_bit_data, CLKF_SW_SUP, "abe-clkctrl:0048:24" }, - { OMAP4_TIMER6_CLKCTRL, omap4_timer6_bit_data, CLKF_SW_SUP, "abe-clkctrl:0050:24" }, - { OMAP4_TIMER7_CLKCTRL, omap4_timer7_bit_data, CLKF_SW_SUP, "abe-clkctrl:0058:24" }, - { OMAP4_TIMER8_CLKCTRL, omap4_timer8_bit_data, CLKF_SW_SUP, "abe-clkctrl:0060:24" }, + { OMAP4_DMIC_CLKCTRL, omap4_dmic_bit_data, CLKF_SW_SUP, "abe_cm:clk:0018:24" }, + { OMAP4_MCASP_CLKCTRL, omap4_mcasp_bit_data, CLKF_SW_SUP, "abe_cm:clk:0020:24" }, + { OMAP4_MCBSP1_CLKCTRL, omap4_mcbsp1_bit_data, CLKF_SW_SUP, "abe_cm:clk:0028:24" }, + { OMAP4_MCBSP2_CLKCTRL, omap4_mcbsp2_bit_data, CLKF_SW_SUP, "abe_cm:clk:0030:24" }, + { OMAP4_MCBSP3_CLKCTRL, omap4_mcbsp3_bit_data, CLKF_SW_SUP, "abe_cm:clk:0038:24" }, + { OMAP4_SLIMBUS1_CLKCTRL, omap4_slimbus1_bit_data, CLKF_SW_SUP, "abe_cm:clk:0040:8" }, + { OMAP4_TIMER5_CLKCTRL, omap4_timer5_bit_data, CLKF_SW_SUP, "abe_cm:clk:0048:24" }, + { OMAP4_TIMER6_CLKCTRL, omap4_timer6_bit_data, CLKF_SW_SUP, "abe_cm:clk:0050:24" }, + { OMAP4_TIMER7_CLKCTRL, omap4_timer7_bit_data, CLKF_SW_SUP, "abe_cm:clk:0058:24" }, + { OMAP4_TIMER8_CLKCTRL, omap4_timer8_bit_data, CLKF_SW_SUP, "abe_cm:clk:0060:24" }, { OMAP4_WD_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { 0 }, }; @@ -287,7 +287,7 @@ static const struct omap_clkctrl_bit_data omap4_fdif_bit_data[] __initconst = { static const struct omap_clkctrl_reg_data omap4_iss_clkctrl_regs[] __initconst = { { OMAP4_ISS_CLKCTRL, omap4_iss_bit_data, CLKF_SW_SUP, "ducati_clk_mux_ck" }, - { OMAP4_FDIF_CLKCTRL, omap4_fdif_bit_data, CLKF_SW_SUP, "iss-clkctrl:0008:24" }, + { OMAP4_FDIF_CLKCTRL, omap4_fdif_bit_data, CLKF_SW_SUP, "iss_cm:clk:0008:24" }, { 0 }, }; @@ -320,7 +320,7 @@ static const struct omap_clkctrl_bit_data omap4_dss_core_bit_data[] __initconst }; static const struct omap_clkctrl_reg_data omap4_l3_dss_clkctrl_regs[] __initconst = { - { OMAP4_DSS_CORE_CLKCTRL, omap4_dss_core_bit_data, CLKF_SW_SUP, "l3-dss-clkctrl:0000:8" }, + { OMAP4_DSS_CORE_CLKCTRL, omap4_dss_core_bit_data, CLKF_SW_SUP, "l3_dss_cm:clk:0000:8" }, { 0 }, }; @@ -336,7 +336,7 @@ static const struct omap_clkctrl_bit_data omap4_gpu_bit_data[] __initconst = { }; static const struct omap_clkctrl_reg_data omap4_l3_gfx_clkctrl_regs[] __initconst = { - { OMAP4_GPU_CLKCTRL, omap4_gpu_bit_data, CLKF_SW_SUP, "l3-gfx-clkctrl:0000:24" }, + { OMAP4_GPU_CLKCTRL, omap4_gpu_bit_data, CLKF_SW_SUP, "l3_gfx_cm:clk:0000:24" }, { 0 }, }; @@ -372,12 +372,12 @@ static const struct omap_clkctrl_bit_data omap4_hsi_bit_data[] __initconst = { }; static const char * const omap4_usb_host_hs_utmi_p1_clk_parents[] __initconst = { - "l3-init-clkctrl:0038:24", + "l3_init_cm:clk:0038:24", NULL, }; static const char * const omap4_usb_host_hs_utmi_p2_clk_parents[] __initconst = { - "l3-init-clkctrl:0038:25", + "l3_init_cm:clk:0038:25", NULL, }; @@ -418,7 +418,7 @@ static const struct omap_clkctrl_bit_data omap4_usb_host_hs_bit_data[] __initcon }; static const char * const omap4_usb_otg_hs_xclk_parents[] __initconst = { - "l3-init-clkctrl:0040:24", + "l3_init_cm:clk:0040:24", NULL, }; @@ -452,14 +452,14 @@ static const struct omap_clkctrl_bit_data omap4_ocp2scp_usb_phy_bit_data[] __ini }; static const struct omap_clkctrl_reg_data omap4_l3_init_clkctrl_regs[] __initconst = { - { OMAP4_MMC1_CLKCTRL, omap4_mmc1_bit_data, CLKF_SW_SUP, "l3-init-clkctrl:0008:24" }, - { OMAP4_MMC2_CLKCTRL, omap4_mmc2_bit_data, CLKF_SW_SUP, "l3-init-clkctrl:0010:24" }, - { OMAP4_HSI_CLKCTRL, omap4_hsi_bit_data, CLKF_HW_SUP, "l3-init-clkctrl:0018:24" }, + { OMAP4_MMC1_CLKCTRL, omap4_mmc1_bit_data, CLKF_SW_SUP, "l3_init_cm:clk:0008:24" }, + { OMAP4_MMC2_CLKCTRL, omap4_mmc2_bit_data, CLKF_SW_SUP, "l3_init_cm:clk:0010:24" }, + { OMAP4_HSI_CLKCTRL, omap4_hsi_bit_data, CLKF_HW_SUP, "l3_init_cm:clk:0018:24" }, { OMAP4_USB_HOST_HS_CLKCTRL, omap4_usb_host_hs_bit_data, CLKF_SW_SUP, "init_60m_fclk" }, { OMAP4_USB_OTG_HS_CLKCTRL, omap4_usb_otg_hs_bit_data, CLKF_HW_SUP, "l3_div_ck" }, { OMAP4_USB_TLL_HS_CLKCTRL, omap4_usb_tll_hs_bit_data, CLKF_HW_SUP, "l4_div_ck" }, { OMAP4_USB_HOST_FS_CLKCTRL, NULL, CLKF_SW_SUP, "func_48mc_fclk" }, - { OMAP4_OCP2SCP_USB_PHY_CLKCTRL, omap4_ocp2scp_usb_phy_bit_data, CLKF_HW_SUP, "l3-init-clkctrl:00c0:8" }, + { OMAP4_OCP2SCP_USB_PHY_CLKCTRL, omap4_ocp2scp_usb_phy_bit_data, CLKF_HW_SUP, "l3_init_cm:clk:00c0:8" }, { 0 }, }; @@ -530,7 +530,7 @@ static const struct omap_clkctrl_bit_data omap4_gpio6_bit_data[] __initconst = { }; static const char * const omap4_per_mcbsp4_gfclk_parents[] __initconst = { - "l4-per-clkctrl:00c0:26", + "l4_per_cm:clk:00c0:26", "pad_clks_ck", NULL, }; @@ -570,12 +570,12 @@ static const struct omap_clkctrl_bit_data omap4_slimbus2_bit_data[] __initconst }; static const struct omap_clkctrl_reg_data omap4_l4_per_clkctrl_regs[] __initconst = { - { OMAP4_TIMER10_CLKCTRL, omap4_timer10_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0008:24" }, - { OMAP4_TIMER11_CLKCTRL, omap4_timer11_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0010:24" }, - { OMAP4_TIMER2_CLKCTRL, omap4_timer2_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0018:24" }, - { OMAP4_TIMER3_CLKCTRL, omap4_timer3_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0020:24" }, - { OMAP4_TIMER4_CLKCTRL, omap4_timer4_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0028:24" }, - { OMAP4_TIMER9_CLKCTRL, omap4_timer9_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0030:24" }, + { OMAP4_TIMER10_CLKCTRL, omap4_timer10_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0008:24" }, + { OMAP4_TIMER11_CLKCTRL, omap4_timer11_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0010:24" }, + { OMAP4_TIMER2_CLKCTRL, omap4_timer2_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0018:24" }, + { OMAP4_TIMER3_CLKCTRL, omap4_timer3_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0020:24" }, + { OMAP4_TIMER4_CLKCTRL, omap4_timer4_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0028:24" }, + { OMAP4_TIMER9_CLKCTRL, omap4_timer9_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0030:24" }, { OMAP4_ELM_CLKCTRL, NULL, 0, "l4_div_ck" }, { OMAP4_GPIO2_CLKCTRL, omap4_gpio2_bit_data, CLKF_HW_SUP, "l4_div_ck" }, { OMAP4_GPIO3_CLKCTRL, omap4_gpio3_bit_data, CLKF_HW_SUP, "l4_div_ck" }, @@ -588,14 +588,14 @@ static const struct omap_clkctrl_reg_data omap4_l4_per_clkctrl_regs[] __initcons { OMAP4_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" }, { OMAP4_I2C4_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" }, { OMAP4_L4_PER_CLKCTRL, NULL, 0, "l4_div_ck" }, - { OMAP4_MCBSP4_CLKCTRL, omap4_mcbsp4_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:00c0:24" }, + { OMAP4_MCBSP4_CLKCTRL, omap4_mcbsp4_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:00c0:24" }, { OMAP4_MCSPI1_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MCSPI2_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MCSPI3_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MCSPI4_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MMC4_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, - { OMAP4_SLIMBUS2_CLKCTRL, omap4_slimbus2_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0118:8" }, + { OMAP4_SLIMBUS2_CLKCTRL, omap4_slimbus2_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0118:8" }, { OMAP4_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, @@ -630,7 +630,7 @@ static const struct omap_clkctrl_reg_data omap4_l4_wkup_clkctrl_regs[] __initcon { OMAP4_L4_WKUP_CLKCTRL, NULL, 0, "l4_wkup_clk_mux_ck" }, { OMAP4_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { OMAP4_GPIO1_CLKCTRL, omap4_gpio1_bit_data, CLKF_HW_SUP, "l4_wkup_clk_mux_ck" }, - { OMAP4_TIMER1_CLKCTRL, omap4_timer1_bit_data, CLKF_SW_SUP, "l4-wkup-clkctrl:0020:24" }, + { OMAP4_TIMER1_CLKCTRL, omap4_timer1_bit_data, CLKF_SW_SUP, "l4_wkup_cm:clk:0020:24" }, { OMAP4_COUNTER_32K_CLKCTRL, NULL, 0, "sys_32k_ck" }, { OMAP4_KBD_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { 0 }, @@ -644,7 +644,7 @@ static const char * const omap4_pmd_stm_clock_mux_ck_parents[] __initconst = { }; static const char * const omap4_trace_clk_div_div_ck_parents[] __initconst = { - "emu-sys-clkctrl:0000:22", + "emu_sys_cm:clk:0000:22", NULL, }; @@ -662,7 +662,7 @@ static const struct omap_clkctrl_div_data omap4_trace_clk_div_div_ck_data __init }; static const char * const omap4_stm_clk_div_ck_parents[] __initconst = { - "emu-sys-clkctrl:0000:20", + "emu_sys_cm:clk:0000:20", NULL, }; @@ -716,73 +716,73 @@ static struct ti_dt_clk omap44xx_clks[] = { * hwmod support. Once hwmod is removed, these can be removed * also. */ - DT_CLK(NULL, "aess_fclk", "abe-clkctrl:0008:24"), - DT_CLK(NULL, "cm2_dm10_mux", "l4-per-clkctrl:0008:24"), - DT_CLK(NULL, "cm2_dm11_mux", "l4-per-clkctrl:0010:24"), - DT_CLK(NULL, "cm2_dm2_mux", "l4-per-clkctrl:0018:24"), - DT_CLK(NULL, "cm2_dm3_mux", "l4-per-clkctrl:0020:24"), - DT_CLK(NULL, "cm2_dm4_mux", "l4-per-clkctrl:0028:24"), - DT_CLK(NULL, "cm2_dm9_mux", "l4-per-clkctrl:0030:24"), - DT_CLK(NULL, "dmic_sync_mux_ck", "abe-clkctrl:0018:26"), - DT_CLK(NULL, "dmt1_clk_mux", "l4-wkup-clkctrl:0020:24"), - DT_CLK(NULL, "dss_48mhz_clk", "l3-dss-clkctrl:0000:9"), - DT_CLK(NULL, "dss_dss_clk", "l3-dss-clkctrl:0000:8"), - DT_CLK(NULL, "dss_sys_clk", "l3-dss-clkctrl:0000:10"), - DT_CLK(NULL, "dss_tv_clk", "l3-dss-clkctrl:0000:11"), - DT_CLK(NULL, "fdif_fck", "iss-clkctrl:0008:24"), - DT_CLK(NULL, "func_dmic_abe_gfclk", "abe-clkctrl:0018:24"), - DT_CLK(NULL, "func_mcasp_abe_gfclk", "abe-clkctrl:0020:24"), - DT_CLK(NULL, "func_mcbsp1_gfclk", "abe-clkctrl:0028:24"), - DT_CLK(NULL, "func_mcbsp2_gfclk", "abe-clkctrl:0030:24"), - DT_CLK(NULL, "func_mcbsp3_gfclk", "abe-clkctrl:0038:24"), - DT_CLK(NULL, "gpio1_dbclk", "l4-wkup-clkctrl:0018:8"), - DT_CLK(NULL, "gpio2_dbclk", "l4-per-clkctrl:0040:8"), - DT_CLK(NULL, "gpio3_dbclk", "l4-per-clkctrl:0048:8"), - DT_CLK(NULL, "gpio4_dbclk", "l4-per-clkctrl:0050:8"), - DT_CLK(NULL, "gpio5_dbclk", "l4-per-clkctrl:0058:8"), - DT_CLK(NULL, "gpio6_dbclk", "l4-per-clkctrl:0060:8"), - DT_CLK(NULL, "hsi_fck", "l3-init-clkctrl:0018:24"), - DT_CLK(NULL, "hsmmc1_fclk", "l3-init-clkctrl:0008:24"), - DT_CLK(NULL, "hsmmc2_fclk", "l3-init-clkctrl:0010:24"), - DT_CLK(NULL, "iss_ctrlclk", "iss-clkctrl:0000:8"), - DT_CLK(NULL, "mcasp_sync_mux_ck", "abe-clkctrl:0020:26"), - DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe-clkctrl:0028:26"), - DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe-clkctrl:0030:26"), - DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe-clkctrl:0038:26"), - DT_CLK(NULL, "mcbsp4_sync_mux_ck", "l4-per-clkctrl:00c0:26"), - DT_CLK(NULL, "ocp2scp_usb_phy_phy_48m", "l3-init-clkctrl:00c0:8"), - DT_CLK(NULL, "otg_60m_gfclk", "l3-init-clkctrl:0040:24"), - DT_CLK(NULL, "per_mcbsp4_gfclk", "l4-per-clkctrl:00c0:24"), - DT_CLK(NULL, "pmd_stm_clock_mux_ck", "emu-sys-clkctrl:0000:20"), - DT_CLK(NULL, "pmd_trace_clk_mux_ck", "emu-sys-clkctrl:0000:22"), - DT_CLK(NULL, "sgx_clk_mux", "l3-gfx-clkctrl:0000:24"), - DT_CLK(NULL, "slimbus1_fclk_0", "abe-clkctrl:0040:8"), - DT_CLK(NULL, "slimbus1_fclk_1", "abe-clkctrl:0040:9"), - DT_CLK(NULL, "slimbus1_fclk_2", "abe-clkctrl:0040:10"), - DT_CLK(NULL, "slimbus1_slimbus_clk", "abe-clkctrl:0040:11"), - DT_CLK(NULL, "slimbus2_fclk_0", "l4-per-clkctrl:0118:8"), - DT_CLK(NULL, "slimbus2_fclk_1", "l4-per-clkctrl:0118:9"), - DT_CLK(NULL, "slimbus2_slimbus_clk", "l4-per-clkctrl:0118:10"), - DT_CLK(NULL, "stm_clk_div_ck", "emu-sys-clkctrl:0000:27"), - DT_CLK(NULL, "timer5_sync_mux", "abe-clkctrl:0048:24"), - DT_CLK(NULL, "timer6_sync_mux", "abe-clkctrl:0050:24"), - DT_CLK(NULL, "timer7_sync_mux", "abe-clkctrl:0058:24"), - DT_CLK(NULL, "timer8_sync_mux", "abe-clkctrl:0060:24"), - DT_CLK(NULL, "trace_clk_div_div_ck", "emu-sys-clkctrl:0000:24"), - DT_CLK(NULL, "usb_host_hs_func48mclk", "l3-init-clkctrl:0038:15"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "l3-init-clkctrl:0038:13"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "l3-init-clkctrl:0038:14"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "l3-init-clkctrl:0038:11"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "l3-init-clkctrl:0038:12"), - DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "l3-init-clkctrl:0038:8"), - DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "l3-init-clkctrl:0038:9"), - DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "l3_init-clkctrl:0038:10"), - DT_CLK(NULL, "usb_otg_hs_xclk", "l3-init-clkctrl:0040:8"), - DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "l3-init-clkctrl:0048:8"), - DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "l3-init-clkctrl:0048:9"), - DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "l3-init-clkctrl:0048:10"), - DT_CLK(NULL, "utmi_p1_gfclk", "l3-init-clkctrl:0038:24"), - DT_CLK(NULL, "utmi_p2_gfclk", "l3-init-clkctrl:0038:25"), + DT_CLK(NULL, "aess_fclk", "abe_cm:0008:24"), + DT_CLK(NULL, "cm2_dm10_mux", "l4_per_cm:0008:24"), + DT_CLK(NULL, "cm2_dm11_mux", "l4_per_cm:0010:24"), + DT_CLK(NULL, "cm2_dm2_mux", "l4_per_cm:0018:24"), + DT_CLK(NULL, "cm2_dm3_mux", "l4_per_cm:0020:24"), + DT_CLK(NULL, "cm2_dm4_mux", "l4_per_cm:0028:24"), + DT_CLK(NULL, "cm2_dm9_mux", "l4_per_cm:0030:24"), + DT_CLK(NULL, "dmic_sync_mux_ck", "abe_cm:0018:26"), + DT_CLK(NULL, "dmt1_clk_mux", "l4_wkup_cm:0020:24"), + DT_CLK(NULL, "dss_48mhz_clk", "l3_dss_cm:0000:9"), + DT_CLK(NULL, "dss_dss_clk", "l3_dss_cm:0000:8"), + DT_CLK(NULL, "dss_sys_clk", "l3_dss_cm:0000:10"), + DT_CLK(NULL, "dss_tv_clk", "l3_dss_cm:0000:11"), + DT_CLK(NULL, "fdif_fck", "iss_cm:0008:24"), + DT_CLK(NULL, "func_dmic_abe_gfclk", "abe_cm:0018:24"), + DT_CLK(NULL, "func_mcasp_abe_gfclk", "abe_cm:0020:24"), + DT_CLK(NULL, "func_mcbsp1_gfclk", "abe_cm:0028:24"), + DT_CLK(NULL, "func_mcbsp2_gfclk", "abe_cm:0030:24"), + DT_CLK(NULL, "func_mcbsp3_gfclk", "abe_cm:0038:24"), + DT_CLK(NULL, "gpio1_dbclk", "l4_wkup_cm:0018:8"), + DT_CLK(NULL, "gpio2_dbclk", "l4_per_cm:0040:8"), + DT_CLK(NULL, "gpio3_dbclk", "l4_per_cm:0048:8"), + DT_CLK(NULL, "gpio4_dbclk", "l4_per_cm:0050:8"), + DT_CLK(NULL, "gpio5_dbclk", "l4_per_cm:0058:8"), + DT_CLK(NULL, "gpio6_dbclk", "l4_per_cm:0060:8"), + DT_CLK(NULL, "hsi_fck", "l3_init_cm:0018:24"), + DT_CLK(NULL, "hsmmc1_fclk", "l3_init_cm:0008:24"), + DT_CLK(NULL, "hsmmc2_fclk", "l3_init_cm:0010:24"), + DT_CLK(NULL, "iss_ctrlclk", "iss_cm:0000:8"), + DT_CLK(NULL, "mcasp_sync_mux_ck", "abe_cm:0020:26"), + DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe_cm:0028:26"), + DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe_cm:0030:26"), + DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe_cm:0038:26"), + DT_CLK(NULL, "mcbsp4_sync_mux_ck", "l4_per_cm:00c0:26"), + DT_CLK(NULL, "ocp2scp_usb_phy_phy_48m", "l3_init_cm:00c0:8"), + DT_CLK(NULL, "otg_60m_gfclk", "l3_init_cm:0040:24"), + DT_CLK(NULL, "per_mcbsp4_gfclk", "l4_per_cm:00c0:24"), + DT_CLK(NULL, "pmd_stm_clock_mux_ck", "emu_sys_cm:0000:20"), + DT_CLK(NULL, "pmd_trace_clk_mux_ck", "emu_sys_cm:0000:22"), + DT_CLK(NULL, "sgx_clk_mux", "l3_gfx_cm:0000:24"), + DT_CLK(NULL, "slimbus1_fclk_0", "abe_cm:0040:8"), + DT_CLK(NULL, "slimbus1_fclk_1", "abe_cm:0040:9"), + DT_CLK(NULL, "slimbus1_fclk_2", "abe_cm:0040:10"), + DT_CLK(NULL, "slimbus1_slimbus_clk", "abe_cm:0040:11"), + DT_CLK(NULL, "slimbus2_fclk_0", "l4_per_cm:0118:8"), + DT_CLK(NULL, "slimbus2_fclk_1", "l4_per_cm:0118:9"), + DT_CLK(NULL, "slimbus2_slimbus_clk", "l4_per_cm:0118:10"), + DT_CLK(NULL, "stm_clk_div_ck", "emu_sys_cm:0000:27"), + DT_CLK(NULL, "timer5_sync_mux", "abe_cm:0048:24"), + DT_CLK(NULL, "timer6_sync_mux", "abe_cm:0050:24"), + DT_CLK(NULL, "timer7_sync_mux", "abe_cm:0058:24"), + DT_CLK(NULL, "timer8_sync_mux", "abe_cm:0060:24"), + DT_CLK(NULL, "trace_clk_div_div_ck", "emu_sys_cm:0000:24"), + DT_CLK(NULL, "usb_host_hs_func48mclk", "l3_init_cm:0038:15"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "l3_init_cm:0038:13"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "l3_init_cm:0038:14"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "l3_init_cm:0038:11"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "l3_init_cm:0038:12"), + DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "l3_init_cm:0038:8"), + DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "l3_init_cm:0038:9"), + DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "l3_init_cm:0038:10"), + DT_CLK(NULL, "usb_otg_hs_xclk", "l3_init_cm:0040:8"), + DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "l3_init_cm:0048:8"), + DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "l3_init_cm:0048:9"), + DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "l3_init_cm:0048:10"), + DT_CLK(NULL, "utmi_p1_gfclk", "l3_init_cm:0038:24"), + DT_CLK(NULL, "utmi_p2_gfclk", "l3_init_cm:0038:25"), { .node_name = NULL }, }; diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index 04a5408085ac..8694bc9f5fc7 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -50,7 +50,7 @@ static const struct omap_clkctrl_bit_data omap5_aess_bit_data[] __initconst = { }; static const char * const omap5_dmic_gfclk_parents[] __initconst = { - "abe-clkctrl:0018:26", + "abe_cm:clk:0018:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -70,7 +70,7 @@ static const struct omap_clkctrl_bit_data omap5_dmic_bit_data[] __initconst = { }; static const char * const omap5_mcbsp1_gfclk_parents[] __initconst = { - "abe-clkctrl:0028:26", + "abe_cm:clk:0028:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -83,7 +83,7 @@ static const struct omap_clkctrl_bit_data omap5_mcbsp1_bit_data[] __initconst = }; static const char * const omap5_mcbsp2_gfclk_parents[] __initconst = { - "abe-clkctrl:0030:26", + "abe_cm:clk:0030:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -96,7 +96,7 @@ static const struct omap_clkctrl_bit_data omap5_mcbsp2_bit_data[] __initconst = }; static const char * const omap5_mcbsp3_gfclk_parents[] __initconst = { - "abe-clkctrl:0038:26", + "abe_cm:clk:0038:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -136,16 +136,16 @@ static const struct omap_clkctrl_bit_data omap5_timer8_bit_data[] __initconst = static const struct omap_clkctrl_reg_data omap5_abe_clkctrl_regs[] __initconst = { { OMAP5_L4_ABE_CLKCTRL, NULL, 0, "abe_iclk" }, - { OMAP5_AESS_CLKCTRL, omap5_aess_bit_data, CLKF_SW_SUP, "abe-clkctrl:0008:24" }, + { OMAP5_AESS_CLKCTRL, omap5_aess_bit_data, CLKF_SW_SUP, "abe_cm:clk:0008:24" }, { OMAP5_MCPDM_CLKCTRL, NULL, CLKF_SW_SUP, "pad_clks_ck" }, - { OMAP5_DMIC_CLKCTRL, omap5_dmic_bit_data, CLKF_SW_SUP, "abe-clkctrl:0018:24" }, - { OMAP5_MCBSP1_CLKCTRL, omap5_mcbsp1_bit_data, CLKF_SW_SUP, "abe-clkctrl:0028:24" }, - { OMAP5_MCBSP2_CLKCTRL, omap5_mcbsp2_bit_data, CLKF_SW_SUP, "abe-clkctrl:0030:24" }, - { OMAP5_MCBSP3_CLKCTRL, omap5_mcbsp3_bit_data, CLKF_SW_SUP, "abe-clkctrl:0038:24" }, - { OMAP5_TIMER5_CLKCTRL, omap5_timer5_bit_data, CLKF_SW_SUP, "abe-clkctrl:0048:24" }, - { OMAP5_TIMER6_CLKCTRL, omap5_timer6_bit_data, CLKF_SW_SUP, "abe-clkctrl:0050:24" }, - { OMAP5_TIMER7_CLKCTRL, omap5_timer7_bit_data, CLKF_SW_SUP, "abe-clkctrl:0058:24" }, - { OMAP5_TIMER8_CLKCTRL, omap5_timer8_bit_data, CLKF_SW_SUP, "abe-clkctrl:0060:24" }, + { OMAP5_DMIC_CLKCTRL, omap5_dmic_bit_data, CLKF_SW_SUP, "abe_cm:clk:0018:24" }, + { OMAP5_MCBSP1_CLKCTRL, omap5_mcbsp1_bit_data, CLKF_SW_SUP, "abe_cm:clk:0028:24" }, + { OMAP5_MCBSP2_CLKCTRL, omap5_mcbsp2_bit_data, CLKF_SW_SUP, "abe_cm:clk:0030:24" }, + { OMAP5_MCBSP3_CLKCTRL, omap5_mcbsp3_bit_data, CLKF_SW_SUP, "abe_cm:clk:0038:24" }, + { OMAP5_TIMER5_CLKCTRL, omap5_timer5_bit_data, CLKF_SW_SUP, "abe_cm:clk:0048:24" }, + { OMAP5_TIMER6_CLKCTRL, omap5_timer6_bit_data, CLKF_SW_SUP, "abe_cm:clk:0050:24" }, + { OMAP5_TIMER7_CLKCTRL, omap5_timer7_bit_data, CLKF_SW_SUP, "abe_cm:clk:0058:24" }, + { OMAP5_TIMER8_CLKCTRL, omap5_timer8_bit_data, CLKF_SW_SUP, "abe_cm:clk:0060:24" }, { 0 }, }; @@ -266,12 +266,12 @@ static const struct omap_clkctrl_bit_data omap5_gpio8_bit_data[] __initconst = { }; static const struct omap_clkctrl_reg_data omap5_l4per_clkctrl_regs[] __initconst = { - { OMAP5_TIMER10_CLKCTRL, omap5_timer10_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0008:24" }, - { OMAP5_TIMER11_CLKCTRL, omap5_timer11_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0010:24" }, - { OMAP5_TIMER2_CLKCTRL, omap5_timer2_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0018:24" }, - { OMAP5_TIMER3_CLKCTRL, omap5_timer3_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0020:24" }, - { OMAP5_TIMER4_CLKCTRL, omap5_timer4_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0028:24" }, - { OMAP5_TIMER9_CLKCTRL, omap5_timer9_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0030:24" }, + { OMAP5_TIMER10_CLKCTRL, omap5_timer10_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0008:24" }, + { OMAP5_TIMER11_CLKCTRL, omap5_timer11_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0010:24" }, + { OMAP5_TIMER2_CLKCTRL, omap5_timer2_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0018:24" }, + { OMAP5_TIMER3_CLKCTRL, omap5_timer3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0020:24" }, + { OMAP5_TIMER4_CLKCTRL, omap5_timer4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0028:24" }, + { OMAP5_TIMER9_CLKCTRL, omap5_timer9_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0030:24" }, { OMAP5_GPIO2_CLKCTRL, omap5_gpio2_bit_data, CLKF_HW_SUP, "l4_root_clk_div" }, { OMAP5_GPIO3_CLKCTRL, omap5_gpio3_bit_data, CLKF_HW_SUP, "l4_root_clk_div" }, { OMAP5_GPIO4_CLKCTRL, omap5_gpio4_bit_data, CLKF_HW_SUP, "l4_root_clk_div" }, @@ -343,7 +343,7 @@ static const struct omap_clkctrl_bit_data omap5_dss_core_bit_data[] __initconst }; static const struct omap_clkctrl_reg_data omap5_dss_clkctrl_regs[] __initconst = { - { OMAP5_DSS_CORE_CLKCTRL, omap5_dss_core_bit_data, CLKF_SW_SUP, "dss-clkctrl:0000:8" }, + { OMAP5_DSS_CORE_CLKCTRL, omap5_dss_core_bit_data, CLKF_SW_SUP, "dss_cm:clk:0000:8" }, { 0 }, }; @@ -376,7 +376,7 @@ static const struct omap_clkctrl_bit_data omap5_gpu_core_bit_data[] __initconst }; static const struct omap_clkctrl_reg_data omap5_gpu_clkctrl_regs[] __initconst = { - { OMAP5_GPU_CLKCTRL, omap5_gpu_core_bit_data, CLKF_SW_SUP, "gpu-clkctrl:0000:24" }, + { OMAP5_GPU_CLKCTRL, omap5_gpu_core_bit_data, CLKF_SW_SUP, "gpu_cm:clk:0000:24" }, { 0 }, }; @@ -387,7 +387,7 @@ static const char * const omap5_mmc1_fclk_mux_parents[] __initconst = { }; static const char * const omap5_mmc1_fclk_parents[] __initconst = { - "l3init-clkctrl:0008:24", + "l3init_cm:clk:0008:24", NULL, }; @@ -403,7 +403,7 @@ static const struct omap_clkctrl_bit_data omap5_mmc1_bit_data[] __initconst = { }; static const char * const omap5_mmc2_fclk_parents[] __initconst = { - "l3init-clkctrl:0010:24", + "l3init_cm:clk:0010:24", NULL, }; @@ -428,12 +428,12 @@ static const char * const omap5_usb_host_hs_hsic480m_p3_clk_parents[] __initcons }; static const char * const omap5_usb_host_hs_utmi_p1_clk_parents[] __initconst = { - "l3init-clkctrl:0038:24", + "l3init_cm:clk:0038:24", NULL, }; static const char * const omap5_usb_host_hs_utmi_p2_clk_parents[] __initconst = { - "l3init-clkctrl:0038:25", + "l3init_cm:clk:0038:25", NULL, }; @@ -492,8 +492,8 @@ static const struct omap_clkctrl_bit_data omap5_usb_otg_ss_bit_data[] __initcons }; static const struct omap_clkctrl_reg_data omap5_l3init_clkctrl_regs[] __initconst = { - { OMAP5_MMC1_CLKCTRL, omap5_mmc1_bit_data, CLKF_SW_SUP, "l3init-clkctrl:0008:25" }, - { OMAP5_MMC2_CLKCTRL, omap5_mmc2_bit_data, CLKF_SW_SUP, "l3init-clkctrl:0010:25" }, + { OMAP5_MMC1_CLKCTRL, omap5_mmc1_bit_data, CLKF_SW_SUP, "l3init_cm:clk:0008:25" }, + { OMAP5_MMC2_CLKCTRL, omap5_mmc2_bit_data, CLKF_SW_SUP, "l3init_cm:clk:0010:25" }, { OMAP5_USB_HOST_HS_CLKCTRL, omap5_usb_host_hs_bit_data, CLKF_SW_SUP, "l3init_60m_fclk" }, { OMAP5_USB_TLL_HS_CLKCTRL, omap5_usb_tll_hs_bit_data, CLKF_HW_SUP, "l4_root_clk_div" }, { OMAP5_SATA_CLKCTRL, omap5_sata_bit_data, CLKF_SW_SUP, "func_48m_fclk" }, @@ -517,7 +517,7 @@ static const struct omap_clkctrl_reg_data omap5_wkupaon_clkctrl_regs[] __initcon { OMAP5_L4_WKUP_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" }, { OMAP5_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { OMAP5_GPIO1_CLKCTRL, omap5_gpio1_bit_data, CLKF_HW_SUP, "wkupaon_iclk_mux" }, - { OMAP5_TIMER1_CLKCTRL, omap5_timer1_bit_data, CLKF_SW_SUP, "wkupaon-clkctrl:0020:24" }, + { OMAP5_TIMER1_CLKCTRL, omap5_timer1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0020:24" }, { OMAP5_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" }, { OMAP5_KBD_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { 0 }, @@ -547,58 +547,58 @@ const struct omap_clkctrl_data omap5_clkctrl_data[] __initconst = { static struct ti_dt_clk omap54xx_clks[] = { DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"), DT_CLK(NULL, "sys_clkin_ck", "sys_clkin"), - DT_CLK(NULL, "dmic_gfclk", "abe-clkctrl:0018:24"), - DT_CLK(NULL, "dmic_sync_mux_ck", "abe-clkctrl:0018:26"), - DT_CLK(NULL, "dss_32khz_clk", "dss-clkctrl:0000:11"), - DT_CLK(NULL, "dss_48mhz_clk", "dss-clkctrl:0000:9"), - DT_CLK(NULL, "dss_dss_clk", "dss-clkctrl:0000:8"), - DT_CLK(NULL, "dss_sys_clk", "dss-clkctrl:0000:10"), - DT_CLK(NULL, "gpio1_dbclk", "wkupaon-clkctrl:0018:8"), - DT_CLK(NULL, "gpio2_dbclk", "l4per-clkctrl:0040:8"), - DT_CLK(NULL, "gpio3_dbclk", "l4per-clkctrl:0048:8"), - DT_CLK(NULL, "gpio4_dbclk", "l4per-clkctrl:0050:8"), - DT_CLK(NULL, "gpio5_dbclk", "l4per-clkctrl:0058:8"), - DT_CLK(NULL, "gpio6_dbclk", "l4per-clkctrl:0060:8"), - DT_CLK(NULL, "gpio7_dbclk", "l4per-clkctrl:00f0:8"), - DT_CLK(NULL, "gpio8_dbclk", "l4per-clkctrl:00f8:8"), - DT_CLK(NULL, "mcbsp1_gfclk", "abe-clkctrl:0028:24"), - DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe-clkctrl:0028:26"), - DT_CLK(NULL, "mcbsp2_gfclk", "abe-clkctrl:0030:24"), - DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe-clkctrl:0030:26"), - DT_CLK(NULL, "mcbsp3_gfclk", "abe-clkctrl:0038:24"), - DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe-clkctrl:0038:26"), - DT_CLK(NULL, "mmc1_32khz_clk", "l3init-clkctrl:0008:8"), - DT_CLK(NULL, "mmc1_fclk", "l3init-clkctrl:0008:25"), - DT_CLK(NULL, "mmc1_fclk_mux", "l3init-clkctrl:0008:24"), - DT_CLK(NULL, "mmc2_fclk", "l3init-clkctrl:0010:25"), - DT_CLK(NULL, "mmc2_fclk_mux", "l3init-clkctrl:0010:24"), - DT_CLK(NULL, "sata_ref_clk", "l3init-clkctrl:0068:8"), - DT_CLK(NULL, "timer10_gfclk_mux", "l4per-clkctrl:0008:24"), - DT_CLK(NULL, "timer11_gfclk_mux", "l4per-clkctrl:0010:24"), - DT_CLK(NULL, "timer1_gfclk_mux", "wkupaon-clkctrl:0020:24"), - DT_CLK(NULL, "timer2_gfclk_mux", "l4per-clkctrl:0018:24"), - DT_CLK(NULL, "timer3_gfclk_mux", "l4per-clkctrl:0020:24"), - DT_CLK(NULL, "timer4_gfclk_mux", "l4per-clkctrl:0028:24"), - DT_CLK(NULL, "timer5_gfclk_mux", "abe-clkctrl:0048:24"), - DT_CLK(NULL, "timer6_gfclk_mux", "abe-clkctrl:0050:24"), - DT_CLK(NULL, "timer7_gfclk_mux", "abe-clkctrl:0058:24"), - DT_CLK(NULL, "timer8_gfclk_mux", "abe-clkctrl:0060:24"), - DT_CLK(NULL, "timer9_gfclk_mux", "l4per-clkctrl:0030:24"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "l3init-clkctrl:0038:13"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "l3init-clkctrl:0038:14"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p3_clk", "l3init-clkctrl:0038:7"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "l3init-clkctrl:0038:11"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "l3init-clkctrl:0038:12"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p3_clk", "l3init-clkctrl:0038:6"), - DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "l3init-clkctrl:0038:8"), - DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "l3init-clkctrl:0038:9"), - DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "l3init-clkctrl:0038:10"), - DT_CLK(NULL, "usb_otg_ss_refclk960m", "l3init-clkctrl:00d0:8"), - DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "l3init-clkctrl:0048:8"), - DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "l3init-clkctrl:0048:9"), - DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "l3init-clkctrl:0048:10"), - DT_CLK(NULL, "utmi_p1_gfclk", "l3init-clkctrl:0038:24"), - DT_CLK(NULL, "utmi_p2_gfclk", "l3init-clkctrl:0038:25"), + DT_CLK(NULL, "dmic_gfclk", "abe_cm:0018:24"), + DT_CLK(NULL, "dmic_sync_mux_ck", "abe_cm:0018:26"), + DT_CLK(NULL, "dss_32khz_clk", "dss_cm:0000:11"), + DT_CLK(NULL, "dss_48mhz_clk", "dss_cm:0000:9"), + DT_CLK(NULL, "dss_dss_clk", "dss_cm:0000:8"), + DT_CLK(NULL, "dss_sys_clk", "dss_cm:0000:10"), + DT_CLK(NULL, "gpio1_dbclk", "wkupaon_cm:0018:8"), + DT_CLK(NULL, "gpio2_dbclk", "l4per_cm:0040:8"), + DT_CLK(NULL, "gpio3_dbclk", "l4per_cm:0048:8"), + DT_CLK(NULL, "gpio4_dbclk", "l4per_cm:0050:8"), + DT_CLK(NULL, "gpio5_dbclk", "l4per_cm:0058:8"), + DT_CLK(NULL, "gpio6_dbclk", "l4per_cm:0060:8"), + DT_CLK(NULL, "gpio7_dbclk", "l4per_cm:00f0:8"), + DT_CLK(NULL, "gpio8_dbclk", "l4per_cm:00f8:8"), + DT_CLK(NULL, "mcbsp1_gfclk", "abe_cm:0028:24"), + DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe_cm:0028:26"), + DT_CLK(NULL, "mcbsp2_gfclk", "abe_cm:0030:24"), + DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe_cm:0030:26"), + DT_CLK(NULL, "mcbsp3_gfclk", "abe_cm:0038:24"), + DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe_cm:0038:26"), + DT_CLK(NULL, "mmc1_32khz_clk", "l3init_cm:0008:8"), + DT_CLK(NULL, "mmc1_fclk", "l3init_cm:0008:25"), + DT_CLK(NULL, "mmc1_fclk_mux", "l3init_cm:0008:24"), + DT_CLK(NULL, "mmc2_fclk", "l3init_cm:0010:25"), + DT_CLK(NULL, "mmc2_fclk_mux", "l3init_cm:0010:24"), + DT_CLK(NULL, "sata_ref_clk", "l3init_cm:0068:8"), + DT_CLK(NULL, "timer10_gfclk_mux", "l4per_cm:0008:24"), + DT_CLK(NULL, "timer11_gfclk_mux", "l4per_cm:0010:24"), + DT_CLK(NULL, "timer1_gfclk_mux", "wkupaon_cm:0020:24"), + DT_CLK(NULL, "timer2_gfclk_mux", "l4per_cm:0018:24"), + DT_CLK(NULL, "timer3_gfclk_mux", "l4per_cm:0020:24"), + DT_CLK(NULL, "timer4_gfclk_mux", "l4per_cm:0028:24"), + DT_CLK(NULL, "timer5_gfclk_mux", "abe_cm:0048:24"), + DT_CLK(NULL, "timer6_gfclk_mux", "abe_cm:0050:24"), + DT_CLK(NULL, "timer7_gfclk_mux", "abe_cm:0058:24"), + DT_CLK(NULL, "timer8_gfclk_mux", "abe_cm:0060:24"), + DT_CLK(NULL, "timer9_gfclk_mux", "l4per_cm:0030:24"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "l3init_cm:0038:13"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "l3init_cm:0038:14"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p3_clk", "l3init_cm:0038:7"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "l3init_cm:0038:11"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "l3init_cm:0038:12"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p3_clk", "l3init_cm:0038:6"), + DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "l3init_cm:0038:8"), + DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "l3init_cm:0038:9"), + DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "l3init_cm:0038:10"), + DT_CLK(NULL, "usb_otg_ss_refclk960m", "l3init_cm:00d0:8"), + DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "l3init_cm:0048:8"), + DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "l3init_cm:0048:9"), + DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "l3init_cm:0048:10"), + DT_CLK(NULL, "utmi_p1_gfclk", "l3init_cm:0038:24"), + DT_CLK(NULL, "utmi_p2_gfclk", "l3init_cm:0038:25"), { .node_name = NULL }, }; diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c index 08a85c559f79..864c484bde1b 100644 --- a/drivers/clk/ti/clkctrl.c +++ b/drivers/clk/ti/clkctrl.c @@ -511,6 +511,10 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node) char *c; u16 soc_mask = 0; + if (!(ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) && + of_node_name_eq(node, "clk")) + ti_clk_features.flags |= TI_CLK_CLKCTRL_COMPAT; + addrp = of_get_address(node, 0, NULL, NULL); addr = (u32)of_translate_address(node, addrp); -- 2.25.1
From: "Jason A. Donenfeld" <Jason@zx2c4.com> stable inclusion from stable-v5.10.148 commit fc87c413f272797cba689b826862a402d5154b96 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit cd4f24ae9404fd31fc461066e57889be3b68641b upstream. Prior to 5.6, when /dev/random was opened with O_NONBLOCK, it would return -EAGAIN if there was no entropy. When the pools were unified in 5.6, this was lost. The post 5.6 behavior of blocking until the pool is initialized, and ignoring O_NONBLOCK in the process, went unnoticed, with no reports about the regression received for two and a half years. However, eventually this indeed did break somebody's userspace. So we restore the old behavior, by returning -EAGAIN if the pool is not initialized. Unlike the old /dev/random, this can only occur during early boot, after which it never blocks again. In order to make this O_NONBLOCK behavior consistent with other expectations, also respect users reading with preadv2(RWF_NOWAIT) and similar. Fixes: 30c08efec888 ("random: make /dev/random be almost like /dev/urandom") Reported-by: Guozihua <guozihua@huawei.com> Reported-by: Zhongguohua <zhongguohua1@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Andrew Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/char/mem.c | 4 ++-- drivers/char/random.c | 5 +++++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 94c2b556cf97..7d483c332348 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -981,8 +981,8 @@ static const struct memdev { #endif [5] = { "zero", 0666, &zero_fops, 0 }, [7] = { "full", 0666, &full_fops, 0 }, - [8] = { "random", 0666, &random_fops, 0 }, - [9] = { "urandom", 0666, &urandom_fops, 0 }, + [8] = { "random", 0666, &random_fops, FMODE_NOWAIT }, + [9] = { "urandom", 0666, &urandom_fops, FMODE_NOWAIT }, #ifdef CONFIG_PRINTK [11] = { "kmsg", 0644, &kmsg_fops, 0 }, #endif diff --git a/drivers/char/random.c b/drivers/char/random.c index d4f0bf1eb6b4..e807be073d73 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1299,6 +1299,11 @@ static ssize_t random_read_iter(struct kiocb *kiocb, struct iov_iter *iter) { int ret; + if (!crng_ready() && + ((kiocb->ki_flags & (IOCB_NOWAIT | IOCB_NOIO)) || + (kiocb->ki_filp->f_flags & O_NONBLOCK))) + return -EAGAIN; + ret = wait_for_random_bytes(); if (ret != 0) return ret; -- 2.25.1
From: "Jason A. Donenfeld" <Jason@zx2c4.com> stable inclusion from stable-v5.10.148 commit 011399a3f926bcc8175610cbcb8981d512b11a17 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit e78a802a7b4febf53f2a92842f494b01062d85a8 upstream. Since the most that's mixed into the pool is sizeof(long)*2, don't credit more than that many bytes of entropy. Fixes: e3e33fc2ea7f ("random: do not use input pool from hard IRQs") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/char/random.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index e807be073d73..a9cacf9a8cbb 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -981,7 +981,7 @@ static void mix_interrupt_randomness(struct work_struct *work) local_irq_enable(); mix_pool_bytes(pool, sizeof(pool)); - credit_init_bits(max(1u, (count & U16_MAX) / 64)); + credit_init_bits(clamp_t(unsigned int, (count & U16_MAX) / 64, 1, sizeof(pool) * 8)); memzero_explicit(pool, sizeof(pool)); } -- 2.25.1
From: Takashi Iwai <tiwai@suse.de> stable inclusion from stable-v5.10.148 commit 2fd1caa0c64bca03ea60f50283d6808af77ad7d2 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 56e696c0f0c71b77fff921fc94b58a02f0445b2c upstream. Hans reported that his Sony VAIO VPX11S1E showed the broken sound behavior at the start of the stream for a couple of seconds, and it turned out that the position_fix=1 option fixes the issue. It implies that the position reporting is inaccurate, and very likely hitting on all Poulsbo devices. The patch applies the workaround for Poulsbo generically to switch to LPIB mode instead of the default position buffer. Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3e8697e1-87c6-7a7b-d2e8-b21f1d2f181b@redhat.com Link: https://lore.kernel.org/r/20221001142124.7241-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- sound/pci/hda/hda_intel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 3910a923e411..46744e4be751 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2634,7 +2634,8 @@ static const struct pci_device_id azx_ids[] = { .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Poulsbo */ { PCI_DEVICE(0x8086, 0x811b), - .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE }, + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE | + AZX_DCAPS_POSFIX_LPIB }, /* Oaktrail */ { PCI_DEVICE(0x8086, 0x080a), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE }, -- 2.25.1
From: Orlando Chamberlain <redecorating@protonmail.com> stable inclusion from stable-v5.10.148 commit 438994b8cd6a39937388ddff827961cf8109bf02 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit bab715bdaa9ebf28d99a6d1efb2704a30125e96d upstream. It turns out Apple doesn't capitalise the "mini" in "Macmini" in DMI, which is inconsistent with other model line names. Correct the capitalisation of Macmini in the quirk for skipping loading platform certs on T2 Macs. Currently users get: ------------[ cut here ]------------ [Firmware Bug]: Page fault caused by firmware at PA: 0xffffa30640054000 WARNING: CPU: 1 PID: 8 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x55/0xe0 Modules linked in: CPU: 1 PID: 8 Comm: kworker/u12:0 Not tainted 5.18.14-arch1-2-t2 #1 4535eb3fc40fd08edab32a509fbf4c9bc52d111e Hardware name: Apple Inc. Macmini8,1/Mac-7BA5B2DFE22DDD8C, BIOS 1731.120.10.0.0 (iBridge: 19.16.15071.0.0,0) 04/24/2022 Workqueue: efi_rts_wq efi_call_rts ... ---[ end trace 0000000000000000 ]--- efi: Froze efi_rts_wq and disabled EFI Runtime Services integrity: Couldn't get size: 0x8000000000000015 integrity: MODSIGN: Couldn't get UEFI db list efi: EFI Runtime Services are disabled! integrity: Couldn't get size: 0x8000000000000015 integrity: Couldn't get UEFI dbx list Fixes: 155ca952c7ca ("efi: Do not import certificates from UEFI Secure Boot for T2 Macs") Cc: stable@vger.kernel.org Cc: Aditya Garg <gargaditya08@live.com> Tested-by: Samuel Jiang <chyishian.jiang@gmail.com> Signed-off-by: Orlando Chamberlain <redecorating@protonmail.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- security/integrity/platform_certs/load_uefi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/integrity/platform_certs/load_uefi.c b/security/integrity/platform_certs/load_uefi.c index 555d2dfc0ff7..185c609c6e38 100644 --- a/security/integrity/platform_certs/load_uefi.c +++ b/security/integrity/platform_certs/load_uefi.c @@ -30,7 +30,7 @@ static const struct dmi_system_id uefi_skip_cert[] = { { UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacBookAir8,1") }, { UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacBookAir8,2") }, { UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacBookAir9,1") }, - { UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacMini8,1") }, + { UEFI_QUIRK_SKIP_CERT("Apple Inc.", "Macmini8,1") }, { UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacPro7,1") }, { UEFI_QUIRK_SKIP_CERT("Apple Inc.", "iMac20,1") }, { UEFI_QUIRK_SKIP_CERT("Apple Inc.", "iMac20,2") }, -- 2.25.1
From: Frank Wunderlich <frank-w@public-files.de> stable inclusion from stable-v5.10.148 commit 638f84a718d99c68ce5a46d24283beecf5d48b7a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit eee48781ea199e32c1d0c4732641c494833788ca upstream. Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/usb/serial/qcserial.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 586ef5551e76..b1e844bf31f8 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -177,6 +177,7 @@ static const struct usb_device_id id_table[] = { {DEVICE_SWI(0x413c, 0x81b3)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */ {DEVICE_SWI(0x413c, 0x81b5)}, /* Dell Wireless 5811e QDL */ {DEVICE_SWI(0x413c, 0x81b6)}, /* Dell Wireless 5811e QDL */ + {DEVICE_SWI(0x413c, 0x81c2)}, /* Dell Wireless 5811e */ {DEVICE_SWI(0x413c, 0x81cb)}, /* Dell Wireless 5816e QDL */ {DEVICE_SWI(0x413c, 0x81cc)}, /* Dell Wireless 5816e */ {DEVICE_SWI(0x413c, 0x81cf)}, /* Dell Wireless 5819 */ -- 2.25.1
From: "Jason A. Donenfeld" <Jason@zx2c4.com> stable inclusion from stable-v5.10.148 commit c1a4423fd30f6ff4289be19786c9e76b5ac104a6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 9ee0507e896b45af6d65408c77815800bce30008 upstream. In order to avoid reading and dirtying two cache lines on every IRQ, move the work_struct to the bottom of the fast_pool struct. add_ interrupt_randomness() always touches .pool and .count, which are currently split, because .mix pushes everything down. Instead, move .mix to the bottom, so that .pool and .count are always in the first cache line, since .mix is only accessed when the pool is full. Fixes: 58340f8e952b ("random: defer fast pool mixing to worker") Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/char/random.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index a9cacf9a8cbb..bd51114bfda8 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -895,10 +895,10 @@ void __cold add_bootloader_randomness(const void *buf, size_t len) EXPORT_SYMBOL_GPL(add_bootloader_randomness); struct fast_pool { - struct work_struct mix; unsigned long pool[4]; unsigned long last; unsigned int count; + struct work_struct mix; }; static DEFINE_PER_CPU(struct fast_pool, irq_randomness) = { -- 2.25.1
From: "Jason A. Donenfeld" <Jason@zx2c4.com> stable inclusion from stable-v5.10.148 commit b0c37581be9ad4c8b249850e4f1ca1900a5a4e1e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 748bc4dd9e663f23448d8ad7e58c011a67ea1eca upstream. Previously, the fast pool was dumped into the main pool periodically in the fast pool's hard IRQ handler. This worked fine and there weren't problems with it, until RT came around. Since RT converts spinlocks into sleeping locks, problems cropped up. Rather than switching to raw spinlocks, the RT developers preferred we make the transformation from originally doing: do_some_stuff() spin_lock() do_some_other_stuff() spin_unlock() to doing: do_some_stuff() queue_work_on(some_other_stuff_worker) This is an ordinary pattern done all over the kernel. However, Sherry noticed a 10% performance regression in qperf TCP over a 40gbps InfiniBand card. Quoting her message:
MT27500 Family [ConnectX-3] cards: Infiniband device 'mlx4_0' port 1 status: default gid: fe80:0000:0000:0000:0010:e000:0178:9eb1 base lid: 0x6 sm lid: 0x1 state: 4: ACTIVE phys state: 5: LinkUp rate: 40 Gb/sec (4X QDR) link_layer: InfiniBand
Cards are configured with IP addresses on private subnet for IPoIB performance testing. Regression identified in this bug is in TCP latency in this stack as reported by qperf tcp_lat metric:
We have one system listen as a qperf server: [root@yourQperfServer ~]# qperf
Have the other system connect to qperf server as a client (in this case, it’s X7 server with Mellanox card): [root@yourQperfClient ~]# numactl -m0 -N0 qperf 20.20.20.101 -v -uu -ub --time 60 --wait_server 20 -oo msg_size:4K:1024K:*2 tcp_lat
Rather than incur the scheduling latency from queue_work_on, we can instead switch to running on the next timer tick, on the same core. This also batches things a bit more -- once per jiffy -- which is okay now that mix_interrupt_randomness() can credit multiple bits at once. Reported-by: Sherry Yang <sherry.yang@oracle.com> Tested-by: Paul Webb <paul.x.webb@oracle.com> Cc: Sherry Yang <sherry.yang@oracle.com> Cc: Phillip Goerl <phillip.goerl@oracle.com> Cc: Jack Vogel <jack.vogel@oracle.com> Cc: Nicky Veitch <nicky.veitch@oracle.com> Cc: Colm Harrington <colm.harrington@oracle.com> Cc: Ramanan Govindarajan <ramanan.govindarajan@oracle.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Tejun Heo <tj@kernel.org> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: stable@vger.kernel.org Fixes: 58340f8e952b ("random: defer fast pool mixing to worker") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/char/random.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index bd51114bfda8..6aa1c013a2b7 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -898,17 +898,20 @@ struct fast_pool { unsigned long pool[4]; unsigned long last; unsigned int count; - struct work_struct mix; + struct timer_list mix; }; +static void mix_interrupt_randomness(struct timer_list *work); + static DEFINE_PER_CPU(struct fast_pool, irq_randomness) = { #ifdef CONFIG_64BIT #define FASTMIX_PERM SIPHASH_PERMUTATION - .pool = { SIPHASH_CONST_0, SIPHASH_CONST_1, SIPHASH_CONST_2, SIPHASH_CONST_3 } + .pool = { SIPHASH_CONST_0, SIPHASH_CONST_1, SIPHASH_CONST_2, SIPHASH_CONST_3 }, #else #define FASTMIX_PERM HSIPHASH_PERMUTATION - .pool = { HSIPHASH_CONST_0, HSIPHASH_CONST_1, HSIPHASH_CONST_2, HSIPHASH_CONST_3 } + .pool = { HSIPHASH_CONST_0, HSIPHASH_CONST_1, HSIPHASH_CONST_2, HSIPHASH_CONST_3 }, #endif + .mix = __TIMER_INITIALIZER(mix_interrupt_randomness, 0) }; /* @@ -950,7 +953,7 @@ int __cold random_online_cpu(unsigned int cpu) } #endif -static void mix_interrupt_randomness(struct work_struct *work) +static void mix_interrupt_randomness(struct timer_list *work) { struct fast_pool *fast_pool = container_of(work, struct fast_pool, mix); /* @@ -1004,10 +1007,11 @@ void add_interrupt_randomness(int irq) if (new_count < 1024 && !time_is_before_jiffies(fast_pool->last + HZ)) return; - if (unlikely(!fast_pool->mix.func)) - INIT_WORK(&fast_pool->mix, mix_interrupt_randomness); fast_pool->count |= MIX_INFLIGHT; - queue_work_on(raw_smp_processor_id(), system_highpri_wq, &fast_pool->mix); + if (!timer_pending(&fast_pool->mix)) { + fast_pool->mix.expires = jiffies; + add_timer_on(&fast_pool->mix, raw_smp_processor_id()); + } } EXPORT_SYMBOL_GPL(add_interrupt_randomness); -- 2.25.1
From: Johannes Berg <johannes.berg@intel.com> stable inclusion from stable-v5.10.148 commit e7aa7fd10eba32835de3dfa7f1691a90043faa73 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 8f033d2becc24aa6bfd2a5c104407963560caabc upstream. Per spec, the maximum value for the MaxBSSID ('n') indicator is 8, and the minimum is 1 since a multiple BSSID set with just one BSSID doesn't make sense (the # of BSSIDs is limited by 2^n). Limit this in the parsing in both cfg80211 and mac80211, rejecting any elements with an invalid value. This fixes potentially bad shifts in the processing of these inside the cfg80211_gen_new_bssid() function later. I found this during the investigation of CVE-2022-41674 fixed by the previous patch. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Fixes: 78ac51f81532 ("mac80211: support multi-bssid") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/mac80211/util.c | 2 ++ net/wireless/scan.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index c2eae5270ee5..764a6655f513 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1409,6 +1409,8 @@ static size_t ieee802_11_find_bssid_profile(const u8 *start, size_t len, for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, start, len) { if (elem->datalen < 2) continue; + if (elem->data[0] < 1 || elem->data[0] > 8) + continue; for_each_element(sub, elem->data + 1, elem->datalen - 1) { u8 new_bssid[ETH_ALEN]; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 1c883c2856f5..b5e6870faaeb 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -2103,6 +2103,8 @@ static void cfg80211_parse_mbssid_data(struct wiphy *wiphy, for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, ie, ielen) { if (elem->datalen < 4) continue; + if (elem->data[0] < 1 || (int)elem->data[0] > 8) + continue; for_each_element(sub, elem->data + 1, elem->datalen - 1) { u8 profile_len; -- 2.25.1
From: Johannes Berg <johannes.berg@intel.com> stable inclusion from stable-v5.10.148 commit 6144c97f96f5cc3ede984b224fdf8dde658cfcad category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 567e14e39e8f8c6997a1378bc3be615afca86063 upstream. When iterating the elements here, ensure the length byte is present before checking it to see if the entire element will fit into the buffer. Longer term, we should rewrite this code using the type-safe element iteration macros that check all of this. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/wireless/scan.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index b5e6870faaeb..d1e338b85a82 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -298,7 +298,8 @@ static size_t cfg80211_gen_new_ie(const u8 *ie, size_t ielen, tmp_old = cfg80211_find_ie(WLAN_EID_SSID, ie, ielen); tmp_old = (tmp_old) ? tmp_old + tmp_old[1] + 2 : ie; - while (tmp_old + tmp_old[1] + 2 - ie <= ielen) { + while (tmp_old + 2 - ie <= ielen && + tmp_old + tmp_old[1] + 2 - ie <= ielen) { if (tmp_old[0] == 0) { tmp_old++; continue; @@ -358,7 +359,8 @@ static size_t cfg80211_gen_new_ie(const u8 *ie, size_t ielen, * copied to new ie, skip ssid, capability, bssid-index ie */ tmp_new = sub_copy; - while (tmp_new + tmp_new[1] + 2 - sub_copy <= subie_len) { + while (tmp_new + 2 - sub_copy <= subie_len && + tmp_new + tmp_new[1] + 2 - sub_copy <= subie_len) { if (!(tmp_new[0] == WLAN_EID_NON_TX_BSSID_CAP || tmp_new[0] == WLAN_EID_SSID)) { memcpy(pos, tmp_new, tmp_new[1] + 2); -- 2.25.1
From: Johannes Berg <johannes.berg@intel.com> stable inclusion from stable-v5.10.148 commit 3539e75abe3c9e5acc0b40b06773bc5aac0e358e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 1833b6f46d7e2830251a063935ab464256defe22 upstream. If the tool on the other side (e.g. wmediumd) gets confused about the rate, we hit a warning in mac80211. Silence that by effectively duplicating the check here and dropping the frame silently (in mac80211 it's dropped with the warning). Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/net/wireless/mac80211_hwsim.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 188f907dcd13..16411fdaee0a 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -3675,6 +3675,8 @@ static int hwsim_cloned_frame_received_nl(struct sk_buff *skb_2, rx_status.band = channel->band; rx_status.rate_idx = nla_get_u32(info->attrs[HWSIM_ATTR_RX_RATE]); + if (rx_status.rate_idx >= data2->hw->wiphy->bands[rx_status.band]->n_bitrates) + goto out; rx_status.signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]); hdr = (void *)skb->data; -- 2.25.1
From: Johannes Berg <johannes.berg@intel.com> stable inclusion from stable-v5.10.148 commit b2b9386667e613d449f38d37517e67b667063283 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit c90b93b5b782891ebfda49d4e5da36632fefd5d1 upstream. When updating beacon elements in a non-transmitted BSS, also update the hidden sub-entries to the same beacon elements, so that a future update through other paths won't trigger a WARN_ON(). The warning is triggered because the beacon elements in the hidden BSSes that are children of the BSS should always be the same as in the parent. Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/wireless/scan.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index d1e338b85a82..22d169923261 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1602,6 +1602,23 @@ struct cfg80211_non_tx_bss { u8 bssid_index; }; +static void cfg80211_update_hidden_bsses(struct cfg80211_internal_bss *known, + const struct cfg80211_bss_ies *new_ies, + const struct cfg80211_bss_ies *old_ies) +{ + struct cfg80211_internal_bss *bss; + + /* Assign beacon IEs to all sub entries */ + list_for_each_entry(bss, &known->hidden_list, hidden_list) { + const struct cfg80211_bss_ies *ies; + + ies = rcu_access_pointer(bss->pub.beacon_ies); + WARN_ON(ies != old_ies); + + rcu_assign_pointer(bss->pub.beacon_ies, new_ies); + } +} + static bool cfg80211_update_known_bss(struct cfg80211_registered_device *rdev, struct cfg80211_internal_bss *known, @@ -1625,7 +1642,6 @@ cfg80211_update_known_bss(struct cfg80211_registered_device *rdev, kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); } else if (rcu_access_pointer(new->pub.beacon_ies)) { const struct cfg80211_bss_ies *old; - struct cfg80211_internal_bss *bss; if (known->pub.hidden_beacon_bss && !list_empty(&known->hidden_list)) { @@ -1653,16 +1669,7 @@ cfg80211_update_known_bss(struct cfg80211_registered_device *rdev, if (old == rcu_access_pointer(known->pub.ies)) rcu_assign_pointer(known->pub.ies, new->pub.beacon_ies); - /* Assign beacon IEs to all sub entries */ - list_for_each_entry(bss, &known->hidden_list, hidden_list) { - const struct cfg80211_bss_ies *ies; - - ies = rcu_access_pointer(bss->pub.beacon_ies); - WARN_ON(ies != old); - - rcu_assign_pointer(bss->pub.beacon_ies, - new->pub.beacon_ies); - } + cfg80211_update_hidden_bsses(known, new->pub.beacon_ies, old); if (old) kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); @@ -2309,6 +2316,8 @@ cfg80211_update_notlisted_nontrans(struct wiphy *wiphy, } else { old = rcu_access_pointer(nontrans_bss->beacon_ies); rcu_assign_pointer(nontrans_bss->beacon_ies, new_ies); + cfg80211_update_hidden_bsses(bss_from_pub(nontrans_bss), + new_ies, old); rcu_assign_pointer(nontrans_bss->ies, new_ies); if (old) kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); -- 2.25.1
From: Pavel Rojtberg <rojtberg@gmail.com> stable inclusion from stable-v5.10.148 commit 19dba9c3b5a3f4a648d4fb5a24f821e201f573e5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit b382c5e37344883dc97525d05f1f6b788f549985 upstream. This is based on multiple commits at https://github.com/paroj/xpad Cc: stable@vger.kernel.org Signed-off-by: Jasper Poppe <jgpoppe@gmail.com> Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz> Signed-off-by: Ruineka <ruinairas1992@gmail.com> Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com> Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/input/joystick/xpad.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index ba101afcfc27..588915658c59 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -112,6 +112,8 @@ static const struct xpad_device { u8 xtype; } xpad_device[] = { { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, + { 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 }, + { 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 }, { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, @@ -242,6 +244,7 @@ static const struct xpad_device { { 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE }, { 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, + { 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX }, { 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX }, { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX }, @@ -258,6 +261,7 @@ static const struct xpad_device { { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 }, { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 }, + { 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE }, @@ -322,6 +326,7 @@ static const struct xpad_device { { 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 }, + { 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE }, @@ -331,6 +336,14 @@ static const struct xpad_device { { 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, + { 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 }, + { 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE }, + { 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 }, + { 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 }, + { 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 }, + { 0x31e3, 0x1220, "Wooting Two HE", 0, XTYPE_XBOX360 }, + { 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 }, + { 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 }, { 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 }, { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX }, { 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX }, @@ -416,6 +429,7 @@ static const signed short xpad_abs_triggers[] = { static const struct usb_device_id xpad_table[] = { { USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */ XPAD_XBOX360_VENDOR(0x0079), /* GPD Win 2 Controller */ + XPAD_XBOX360_VENDOR(0x03eb), /* Wooting Keyboards (Legacy) */ XPAD_XBOX360_VENDOR(0x044f), /* Thrustmaster X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */ XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft X-Box One controllers */ @@ -426,6 +440,7 @@ static const struct usb_device_id xpad_table[] = { { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */ XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */ XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz GamePad */ + XPAD_XBOX360_VENDOR(0x0c12), /* Zeroplus X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */ XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f X-Box One controllers */ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */ @@ -446,8 +461,12 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOXONE_VENDOR(0x20d6), /* PowerA Controllers */ XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */ XPAD_XBOXONE_VENDOR(0x24c6), /* PowerA Controllers */ + XPAD_XBOX360_VENDOR(0x2563), /* OneXPlayer Gamepad */ + XPAD_XBOX360_VENDOR(0x260d), /* Dareu H101 */ + XPAD_XBOXONE_VENDOR(0x2dc8), /* 8BitDo Pro 2 Wired Controller for Xbox */ XPAD_XBOXONE_VENDOR(0x2e24), /* Hyperkin Duke X-Box One pad */ XPAD_XBOX360_VENDOR(0x2f24), /* GameSir Controllers */ + XPAD_XBOX360_VENDOR(0x31e3), /* Wooting Keyboards */ XPAD_XBOX360_VENDOR(0x3285), /* Nacon GC-100 */ { } }; -- 2.25.1
From: Cameron Gutman <aicommander@gmail.com> stable inclusion from stable-v5.10.148 commit 9c13b1a044c96315a87f3b5bd6d8d2cd1796bce8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit a17b9841152e7f4621619902b347e2cc39c32996 upstream. Suspending and resuming the system can sometimes cause the out URB to get hung after a reset_resume. This causes LED setting and force feedback to break on resume. To avoid this, just drop the reset_resume callback so the USB core rebinds xpad to the wireless pads on resume if a reset happened. A nice side effect of this change is the LED ring on wireless controllers is now set correctly on system resume. Cc: stable@vger.kernel.org Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/input/joystick/xpad.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 588915658c59..70dedc0f7827 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1983,7 +1983,6 @@ static struct usb_driver xpad_driver = { .disconnect = xpad_disconnect, .suspend = xpad_suspend, .resume = xpad_resume, - .reset_resume = xpad_resume, .id_table = xpad_table, }; -- 2.25.1
From: Shunsuke Mie <mie@igel.co.jp> stable inclusion from stable-v5.10.148 commit 40a29e58f6394963829bb1a26ff3bc9ef6c3aae5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 3e42deaac06567c7e86d287c305ccda24db4ae3d upstream. Each transfer test functions have same parameter checking code. This patch unites those to an introduced function. Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220907020100.122588-1-mie@igel.co.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/misc/pci_endpoint_test.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index d3844730eaca..16c640a656a8 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -331,6 +331,17 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test, return false; } +static int pci_endpoint_test_validate_xfer_params(struct device *dev, + struct pci_endpoint_test_xfer_param *param, size_t alignment) +{ + if (param->size > SIZE_MAX - alignment) { + dev_dbg(dev, "Maximum transfer data size exceeded\n"); + return -EINVAL; + } + + return 0; +} + static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, unsigned long arg) { @@ -362,9 +373,11 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, return false; } + err = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); + if (err) + return false; + size = param.size; - if (size > SIZE_MAX - alignment) - goto err; use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA); if (use_dma) @@ -496,9 +509,11 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, return false; } + err = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); + if (err) + return false; + size = param.size; - if (size > SIZE_MAX - alignment) - goto err; use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA); if (use_dma) @@ -594,9 +609,11 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, return false; } + err = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); + if (err) + return false; + size = param.size; - if (size > SIZE_MAX - alignment) - goto err; use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA); if (use_dma) -- 2.25.1
From: Shunsuke Mie <mie@igel.co.jp> stable inclusion from stable-v5.10.148 commit 0df206bdc6204b758585bbe159a55e23e7917b13 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 8e30538eca016de8e252bef174beadecd64239f0 upstream. The dma_map_single() doesn't permit zero length mapping. It causes a follow panic. A panic was reported on arm64: [ 60.137988] ------------[ cut here ]------------ [ 60.142630] kernel BUG at kernel/dma/swiotlb.c:624! [ 60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l 2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl [ 60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237 [ 60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT) [ 60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590 [ 60.213149] lr : swiotlb_map+0x88/0x1f0 [ 60.216982] sp : ffff80000a883bc0 [ 60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000 [ 60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0 [ 60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000 [ 60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000 [ 60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180 [ 60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000 [ 60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000 [ 60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001 [ 60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010 [ 60.291658] Call trace: [ 60.294100] swiotlb_tbl_map_single+0x2c0/0x590 [ 60.298629] swiotlb_map+0x88/0x1f0 [ 60.302115] dma_map_page_attrs+0x188/0x230 [ 60.306299] pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test] [ 60.312660] __arm64_sys_ioctl+0xa8/0xf0 [ 60.316583] invoke_syscall+0x44/0x108 [ 60.320334] el0_svc_common.constprop.0+0xcc/0xf0 [ 60.325038] do_el0_svc+0x2c/0xb8 [ 60.328351] el0_svc+0x2c/0x88 [ 60.331406] el0t_64_sync_handler+0xb8/0xc0 [ 60.335587] el0t_64_sync+0x18c/0x190 [ 60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000) [ 60.345344] ---[ end trace 0000000000000000 ]--- To fix it, this patch adds a checking the payload length if it is zero. Fixes: 343dc693f7b7 ("misc: pci_endpoint_test: Prevent some integer overflows") Cc: stable <stable@kernel.org> Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Link: https://lore.kernel.org/r/20220907020100.122588-2-mie@igel.co.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/misc/pci_endpoint_test.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 16c640a656a8..48eec5fe7397 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -334,6 +334,11 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test, static int pci_endpoint_test_validate_xfer_params(struct device *dev, struct pci_endpoint_test_xfer_param *param, size_t alignment) { + if (!param->size) { + dev_dbg(dev, "Data size is zero\n"); + return -EINVAL; + } + if (param->size > SIZE_MAX - alignment) { dev_dbg(dev, "Maximum transfer data size exceeded\n"); return -EINVAL; -- 2.25.1
From: Sasha Levin <sashal@kernel.org> stable inclusion from stable-v5.10.149 commit a07708a843558658de1cdff63ae653e6dcb8c81a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WY Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- This reverts commit fd0a6e99b61e6c08fa5cf585d54fd956f70c73a6. Which was upstream commit 97ef77c52b789ec1411d360ed99dca1efe4b2c81. The commit is missing dependencies and breaks NFS tests, remove it for now. Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/splice.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index 6610e55c0e2a..866d5c2367b2 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -806,15 +806,17 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, { struct pipe_inode_info *pipe; long ret, bytes; + umode_t i_mode; size_t len; int i, flags, more; /* - * We require the input to be seekable, as we don't want to randomly - * drop data for eg socket -> socket splicing. Use the piped splicing - * for that! + * We require the input being a regular file, as we don't want to + * randomly drop data for eg socket -> socket splicing. Use the + * piped splicing for that! */ - if (unlikely(!(in->f_mode & FMODE_LSEEK))) + i_mode = file_inode(in)->i_mode; + if (unlikely(!S_ISREG(i_mode) && !S_ISBLK(i_mode))) return -EINVAL; /* -- 2.25.1
From: Johannes Berg <johannes.berg@intel.com> stable inclusion from stable-v5.10.149 commit 66dacdbc2e830e1187bf0f1171ca257d816ab7e3 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WY Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- There's no need to parse all elements etc. just to find the authentication challenge - use cfg80211_find_elem() instead. This also allows us to remove WLAN_EID_CHALLENGE handling from the element parsing entirely. Link: https://lore.kernel.org/r/20210920154009.45f9b3a15722.Ice3159ffad03a007d6154... Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/mac80211/ieee80211_i.h | 2 -- net/mac80211/mlme.c | 11 ++++++----- net/mac80211/util.c | 4 ---- 3 files changed, 6 insertions(+), 11 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index f68170a68d71..63499db5c63d 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1485,7 +1485,6 @@ struct ieee802_11_elems { const u8 *supp_rates; const u8 *ds_params; const struct ieee80211_tim_ie *tim; - const u8 *challenge; const u8 *rsn; const u8 *rsnx; const u8 *erp_info; @@ -1538,7 +1537,6 @@ struct ieee802_11_elems { u8 ssid_len; u8 supp_rates_len; u8 tim_len; - u8 challenge_len; u8 rsn_len; u8 rsnx_len; u8 ext_supp_rates_len; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 29e4d4961c37..b08c2470cd2c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2899,14 +2899,14 @@ static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; + const struct element *challenge; u8 *pos; - struct ieee802_11_elems elems; u32 tx_flags = 0; pos = mgmt->u.auth.variable; - ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems, - mgmt->bssid, auth_data->bss->bssid); - if (!elems.challenge) + challenge = cfg80211_find_elem(WLAN_EID_CHALLENGE, pos, + len - (pos - (u8 *)mgmt)); + if (!challenge) return; auth_data->expected_transaction = 4; drv_mgd_prepare_tx(sdata->local, sdata, 0); @@ -2914,7 +2914,8 @@ static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | IEEE80211_TX_INTFL_MLME_CONN_TX; ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0, - elems.challenge - 2, elems.challenge_len + 2, + (void *)challenge, + challenge->datalen + sizeof(*challenge), auth_data->bss->bssid, auth_data->bss->bssid, auth_data->key, auth_data->key_len, auth_data->key_idx, tx_flags); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 764a6655f513..7fa6efa8b83c 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1124,10 +1124,6 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, } else elem_parse_failed = true; break; - case WLAN_EID_CHALLENGE: - elems->challenge = pos; - elems->challenge_len = elen; - break; case WLAN_EID_VENDOR_SPECIFIC: if (elen >= 4 && pos[0] == 0x00 && pos[1] == 0x50 && pos[2] == 0xf2) { -- 2.25.1
From: Johannes Berg <johannes.berg@intel.com> stable inclusion from stable-v5.10.149 commit 353b5c8d4bea712774ccc631782ed8cc3630528a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0WY Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- This is simply not valid and simplifies the next commit. I'll make a separate patch for this in the current main tree as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com> --- net/mac80211/mlme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index b08c2470cd2c..c52b8eb7fb8a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3300,7 +3300,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, } capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, elems, - mgmt->bssid, assoc_data->bss->bssid); + mgmt->bssid, NULL); if (elems->aid_resp) aid = le16_to_cpu(elems->aid_resp->aid); @@ -3709,7 +3709,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, return; ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems, - mgmt->bssid, assoc_data->bss->bssid); + mgmt->bssid, NULL); if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && elems.timeout_int && -- 2.25.1
participants (1)
-
Jialin Zhang