[PATCH OLK-5.10 0/3] cppc_cpufreq: use policy->cpu in cppc_set_perf()
Ionela Voinescu (2): cppc_cpufreq: clean up cpu, cpu_num and cpunum variable use cppc_cpufreq: use policy->cpu as driver of frequency setting Zeng Heng (1): cppc_cpufreq: get cpunum from fb_ctrs instead of smp_processor_id() drivers/cpufreq/cppc_cpufreq.c | 166 +++++++++++++++++---------------- 1 file changed, 85 insertions(+), 81 deletions(-) -- 2.25.1
hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8ELKA ---------------------------------------- In cppc_cpufreq_get_rate(), when the platform doesn't have AMU and call cppc_get_perf_ctrs_sample() directly, it needs target cpunum argument but not get local cpu by smp_processor_id(). Here introduce the struct fb_ctr_pair which includes the target cpunum, and acts as the parameter of cppc_get_perf_ctrs_sample(). Fixes: 904d9dcde3e6 ("cpufreq: CPPC: keep target core awake when reading its cpufreq rate") Signed-off-by: Zeng Heng <zengheng4@huawei.com> --- drivers/cpufreq/cppc_cpufreq.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index f7f3632dcf31..225c5260d2cb 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -57,6 +57,12 @@ static struct cppc_workaround_oem_info wa_info[] = { } }; +struct fb_ctr_pair { + u32 cpu; + struct cppc_perf_fb_ctrs fb_ctrs_t0; + struct cppc_perf_fb_ctrs fb_ctrs_t1; +}; + /* Callback function used to retrieve the max frequency from DMI */ static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private) { @@ -352,35 +358,37 @@ static int cppc_get_rate_from_fbctrs(struct cppc_cpudata *cpu, static int cppc_get_perf_ctrs_sample(void *val) { - int cpunum = smp_processor_id(); - struct cppc_perf_fb_ctrs *fb_ctrs = val; + struct fb_ctr_pair *fb_ctrs = val; + int cpu = fb_ctrs->cpu; int ret; - ret = cppc_get_perf_ctrs(cpunum, fb_ctrs); + ret = cppc_get_perf_ctrs(cpu, &fb_ctrs->fb_ctrs_t0); if (ret) return ret; udelay(2); /* 2usec delay between sampling */ - return cppc_get_perf_ctrs(cpunum, fb_ctrs + 1); + return cppc_get_perf_ctrs(cpu, &fb_ctrs->fb_ctrs_t1); } static unsigned int cppc_cpufreq_get_rate(unsigned int cpunum) { - struct cppc_perf_fb_ctrs fb_ctrs[2] = {0}; + struct fb_ctr_pair fb_ctrs = { .cpu = cpunum, }; struct cppc_cpudata *cpu = all_cpu_data[cpunum]; int ret; if (cpu_has_amu_feat(cpunum)) ret = smp_call_on_cpu(cpunum, cppc_get_perf_ctrs_sample, - fb_ctrs, false); + &fb_ctrs, false); else - ret = cppc_get_perf_ctrs_sample(fb_ctrs); + ret = cppc_get_perf_ctrs_sample(&fb_ctrs); if (ret) return ret; - return cppc_get_rate_from_fbctrs(cpu, fb_ctrs[0], fb_ctrs[1]); + return cppc_get_rate_from_fbctrs(cpu, + fb_ctrs.fb_ctrs_t0, + fb_ctrs.fb_ctrs_t1); } static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state) -- 2.25.1
From: Ionela Voinescu <ionela.voinescu@arm.com> mainline inclusion from mainline-v5.11-rc1 commit 48ad8dc94032ab43f0655190d9687f6d65b98f7f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TPP6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- In order to maintain the typical naming convention in the cpufreq framework: - replace the use of "cpu" variable name for cppc_cpudata pointers with "cpu_data" - replace variable names "cpu_num" and "cpunum" with "cpu" - make cpu variables unsigned int Where pertinent, also move the initialisation of cpu_data variable to its declaration and make consistent use of the local "cpu" variable. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Zeng Heng <zengheng4@huawei.com> --- drivers/cpufreq/cppc_cpufreq.c | 145 ++++++++++++++++----------------- 1 file changed, 70 insertions(+), 75 deletions(-) diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index 225c5260d2cb..5f74833b3fb1 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -102,11 +102,11 @@ static u64 cppc_get_dmi_max_khz(void) * and extrapolate the rest * For perf/freq > Nominal, we use the ratio perf:freq at Nominal for conversion */ -static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu, +static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data, unsigned int perf) { static u64 max_khz; - struct cppc_perf_caps *caps = &cpu->perf_caps; + struct cppc_perf_caps *caps = &cpu_data->perf_caps; u64 mul, div; if (caps->lowest_freq && caps->nominal_freq) { @@ -126,11 +126,11 @@ static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu, return (u64)perf * mul / div; } -static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu, +static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data, unsigned int freq) { static u64 max_khz; - struct cppc_perf_caps *caps = &cpu->perf_caps; + struct cppc_perf_caps *caps = &cpu_data->perf_caps; u64 mul, div; if (caps->lowest_freq && caps->nominal_freq) { @@ -155,29 +155,27 @@ static int cppc_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - struct cppc_cpudata *cpu; + struct cppc_cpudata *cpu_data = all_cpu_data[policy->cpu]; struct cpufreq_freqs freqs; u32 desired_perf; int ret = 0; - cpu = all_cpu_data[policy->cpu]; - - desired_perf = cppc_cpufreq_khz_to_perf(cpu, target_freq); + desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq); /* Return if it is exactly the same perf */ - if (desired_perf == cpu->perf_ctrls.desired_perf) + if (desired_perf == cpu_data->perf_ctrls.desired_perf) return ret; - cpu->perf_ctrls.desired_perf = desired_perf; + cpu_data->perf_ctrls.desired_perf = desired_perf; freqs.old = policy->cur; freqs.new = target_freq; cpufreq_freq_transition_begin(policy, &freqs); - ret = cppc_set_perf(cpu->cpu, &cpu->perf_ctrls); + ret = cppc_set_perf(cpu_data->cpu, &cpu_data->perf_ctrls); cpufreq_freq_transition_end(policy, &freqs, ret != 0); if (ret) pr_debug("Failed to set target on CPU:%d. ret:%d\n", - cpu->cpu, ret); + cpu_data->cpu, ret); return ret; } @@ -190,16 +188,16 @@ static int cppc_verify_policy(struct cpufreq_policy_data *policy) static void cppc_cpufreq_stop_cpu(struct cpufreq_policy *policy) { - int cpu_num = policy->cpu; - struct cppc_cpudata *cpu = all_cpu_data[cpu_num]; + struct cppc_cpudata *cpu_data = all_cpu_data[policy->cpu]; + unsigned int cpu = policy->cpu; int ret; - cpu->perf_ctrls.desired_perf = cpu->perf_caps.lowest_perf; + cpu_data->perf_ctrls.desired_perf = cpu_data->perf_caps.lowest_perf; - ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls); + ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); if (ret) pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n", - cpu->perf_caps.lowest_perf, cpu_num, ret); + cpu_data->perf_caps.lowest_perf, cpu, ret); } /* @@ -211,7 +209,7 @@ static void cppc_cpufreq_stop_cpu(struct cpufreq_policy *policy) #ifdef CONFIG_ARM64 #include <asm/cputype.h> -static unsigned int cppc_cpufreq_get_transition_delay_us(int cpu) +static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu) { unsigned long implementor = read_cpuid_implementor(); unsigned long part_num = read_cpuid_part_number(); @@ -239,7 +237,7 @@ static unsigned int cppc_cpufreq_get_transition_delay_us(int cpu) #else -static unsigned int cppc_cpufreq_get_transition_delay_us(int cpu) +static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu) { return cppc_get_transition_latency(cpu) / NSEC_PER_USEC; } @@ -247,54 +245,52 @@ static unsigned int cppc_cpufreq_get_transition_delay_us(int cpu) static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy) { - struct cppc_cpudata *cpu; - unsigned int cpu_num = policy->cpu; + struct cppc_cpudata *cpu_data = all_cpu_data[policy->cpu]; + unsigned int cpu = policy->cpu; int ret = 0; - cpu = all_cpu_data[policy->cpu]; - - cpu->cpu = cpu_num; - ret = cppc_get_perf_caps(policy->cpu, &cpu->perf_caps); + cpu_data->cpu = cpu; + ret = cppc_get_perf_caps(policy->cpu, &cpu_data->perf_caps); if (ret) { pr_debug("Err reading CPU%d perf capabilities. ret:%d\n", - cpu_num, ret); + cpu, ret); return ret; } /* Convert the lowest and nominal freq from MHz to KHz */ - cpu->perf_caps.lowest_freq *= 1000; - cpu->perf_caps.nominal_freq *= 1000; + cpu_data->perf_caps.lowest_freq *= 1000; + cpu_data->perf_caps.nominal_freq *= 1000; /* * Set min to lowest nonlinear perf to avoid any efficiency penalty (see * Section 8.4.7.1.1.5 of ACPI 6.1 spec) */ - policy->min = cppc_cpufreq_perf_to_khz(cpu, cpu->perf_caps.lowest_nonlinear_perf); - policy->max = cppc_cpufreq_perf_to_khz(cpu, cpu->perf_caps.nominal_perf); + policy->min = cppc_cpufreq_perf_to_khz(cpu_data, cpu_data->perf_caps.lowest_nonlinear_perf); + policy->max = cppc_cpufreq_perf_to_khz(cpu_data, cpu_data->perf_caps.nominal_perf); /* * Set cpuinfo.min_freq to Lowest to make the full range of performance * available if userspace wants to use any perf between lowest & lowest * nonlinear perf */ - policy->cpuinfo.min_freq = cppc_cpufreq_perf_to_khz(cpu, cpu->perf_caps.lowest_perf); - policy->cpuinfo.max_freq = cppc_cpufreq_perf_to_khz(cpu, cpu->perf_caps.nominal_perf); + policy->cpuinfo.min_freq = cppc_cpufreq_perf_to_khz(cpu_data, cpu_data->perf_caps.lowest_perf); + policy->cpuinfo.max_freq = cppc_cpufreq_perf_to_khz(cpu_data, cpu_data->perf_caps.nominal_perf); - policy->transition_delay_us = cppc_cpufreq_get_transition_delay_us(cpu_num); - policy->shared_type = cpu->shared_type; + policy->transition_delay_us = cppc_cpufreq_get_transition_delay_us(cpu); + policy->shared_type = cpu_data->shared_type; if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { int i; - cpumask_copy(policy->cpus, cpu->shared_cpu_map); + cpumask_copy(policy->cpus, cpu_data->shared_cpu_map); for_each_cpu(i, policy->cpus) { - if (unlikely(i == policy->cpu)) + if (unlikely(i == cpu)) continue; - memcpy(&all_cpu_data[i]->perf_caps, &cpu->perf_caps, - sizeof(cpu->perf_caps)); + memcpy(&all_cpu_data[i]->perf_caps, &cpu_data->perf_caps, + sizeof(cpu_data->perf_caps)); } } else if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL) { /* Support only SW_ANY for now. */ @@ -302,24 +298,24 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy) return -EFAULT; } - cpu->cur_policy = policy; + cpu_data->cur_policy = policy; /* * If 'highest_perf' is greater than 'nominal_perf', we assume CPU Boost * is supported. */ - if (cpu->perf_caps.highest_perf > cpu->perf_caps.nominal_perf) + if (cpu_data->perf_caps.highest_perf > cpu_data->perf_caps.nominal_perf) boost_supported = true; /* Set policy->cur to max now. The governors will adjust later. */ - policy->cur = cppc_cpufreq_perf_to_khz(cpu, - cpu->perf_caps.highest_perf); - cpu->perf_ctrls.desired_perf = cpu->perf_caps.highest_perf; + policy->cur = cppc_cpufreq_perf_to_khz(cpu_data, + cpu_data->perf_caps.highest_perf); + cpu_data->perf_ctrls.desired_perf = cpu_data->perf_caps.highest_perf; - ret = cppc_set_perf(cpu_num, &cpu->perf_ctrls); + ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); if (ret) pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n", - cpu->perf_caps.highest_perf, cpu_num, ret); + cpu_data->perf_caps.highest_perf, cpu, ret); return ret; } @@ -332,7 +328,7 @@ static inline u64 get_delta(u64 t1, u64 t0) return (u32)t1 - (u32)t0; } -static int cppc_get_rate_from_fbctrs(struct cppc_cpudata *cpu, +static int cppc_get_rate_from_fbctrs(struct cppc_cpudata *cpu_data, struct cppc_perf_fb_ctrs fb_ctrs_t0, struct cppc_perf_fb_ctrs fb_ctrs_t1) { @@ -351,9 +347,9 @@ static int cppc_get_rate_from_fbctrs(struct cppc_cpudata *cpu, delivered_perf = (reference_perf * delta_delivered) / delta_reference; else - delivered_perf = cpu->perf_ctrls.desired_perf; + delivered_perf = cpu_data->perf_ctrls.desired_perf; - return cppc_cpufreq_perf_to_khz(cpu, delivered_perf); + return cppc_cpufreq_perf_to_khz(cpu_data, delivered_perf); } static int cppc_get_perf_ctrs_sample(void *val) @@ -371,14 +367,14 @@ static int cppc_get_perf_ctrs_sample(void *val) return cppc_get_perf_ctrs(cpu, &fb_ctrs->fb_ctrs_t1); } -static unsigned int cppc_cpufreq_get_rate(unsigned int cpunum) +static unsigned int cppc_cpufreq_get_rate(unsigned int cpu) { - struct fb_ctr_pair fb_ctrs = { .cpu = cpunum, }; - struct cppc_cpudata *cpu = all_cpu_data[cpunum]; + struct fb_ctr_pair fb_ctrs = { .cpu = cpu, }; + struct cppc_cpudata *cpu_data = all_cpu_data[cpu]; int ret; - if (cpu_has_amu_feat(cpunum)) - ret = smp_call_on_cpu(cpunum, cppc_get_perf_ctrs_sample, + if (cpu_has_amu_feat(cpu)) + ret = smp_call_on_cpu(cpu, cppc_get_perf_ctrs_sample, &fb_ctrs, false); else ret = cppc_get_perf_ctrs_sample(&fb_ctrs); @@ -386,14 +382,14 @@ static unsigned int cppc_cpufreq_get_rate(unsigned int cpunum) if (ret) return ret; - return cppc_get_rate_from_fbctrs(cpu, + return cppc_get_rate_from_fbctrs(cpu_data, fb_ctrs.fb_ctrs_t0, fb_ctrs.fb_ctrs_t1); } static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state) { - struct cppc_cpudata *cpudata; + struct cppc_cpudata *cpu_data = all_cpu_data[policy->cpu]; int ret; if (!boost_supported) { @@ -401,13 +397,12 @@ static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state) return -EINVAL; } - cpudata = all_cpu_data[policy->cpu]; if (state) - policy->max = cppc_cpufreq_perf_to_khz(cpudata, - cpudata->perf_caps.highest_perf); + policy->max = cppc_cpufreq_perf_to_khz(cpu_data, + cpu_data->perf_caps.highest_perf); else - policy->max = cppc_cpufreq_perf_to_khz(cpudata, - cpudata->perf_caps.nominal_perf); + policy->max = cppc_cpufreq_perf_to_khz(cpu_data, + cpu_data->perf_caps.nominal_perf); policy->cpuinfo.max_freq = policy->max; ret = freq_qos_update_request(policy->max_freq_req, policy->max); @@ -434,17 +429,17 @@ static struct cpufreq_driver cppc_cpufreq_driver = { * platform specific mechanism. We reuse the desired performance register to * store the real performance calculated by the platform. */ -static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpunum) +static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu) { - struct cppc_cpudata *cpudata = all_cpu_data[cpunum]; + struct cppc_cpudata *cpu_data = all_cpu_data[cpu]; u64 desired_perf; int ret; - ret = cppc_get_desired_perf(cpunum, &desired_perf); + ret = cppc_get_desired_perf(cpu, &desired_perf); if (ret < 0) return -EIO; - return cppc_cpufreq_perf_to_khz(cpudata, desired_perf); + return cppc_cpufreq_perf_to_khz(cpu_data, desired_perf); } static void cppc_check_hisi_workaround(void) @@ -473,7 +468,7 @@ static void cppc_check_hisi_workaround(void) static int __init cppc_cpufreq_init(void) { int i, ret = 0; - struct cppc_cpudata *cpu; + struct cppc_cpudata *cpu_data; if (acpi_disabled) return -ENODEV; @@ -488,8 +483,8 @@ static int __init cppc_cpufreq_init(void) if (!all_cpu_data[i]) goto out; - cpu = all_cpu_data[i]; - if (!zalloc_cpumask_var(&cpu->shared_cpu_map, GFP_KERNEL)) + cpu_data = all_cpu_data[i]; + if (!zalloc_cpumask_var(&cpu_data->shared_cpu_map, GFP_KERNEL)) goto out; } @@ -509,11 +504,11 @@ static int __init cppc_cpufreq_init(void) out: for_each_possible_cpu(i) { - cpu = all_cpu_data[i]; - if (!cpu) + cpu_data = all_cpu_data[i]; + if (!cpu_data) break; - free_cpumask_var(cpu->shared_cpu_map); - kfree(cpu); + free_cpumask_var(cpu_data->shared_cpu_map); + kfree(cpu_data); } kfree(all_cpu_data); @@ -522,15 +517,15 @@ static int __init cppc_cpufreq_init(void) static void __exit cppc_cpufreq_exit(void) { - struct cppc_cpudata *cpu; + struct cppc_cpudata *cpu_data; int i; cpufreq_unregister_driver(&cppc_cpufreq_driver); for_each_possible_cpu(i) { - cpu = all_cpu_data[i]; - free_cpumask_var(cpu->shared_cpu_map); - kfree(cpu); + cpu_data = all_cpu_data[i]; + free_cpumask_var(cpu_data->shared_cpu_map); + kfree(cpu_data); } kfree(all_cpu_data); -- 2.25.1
From: Ionela Voinescu <ionela.voinescu@arm.com> mainline inclusion from mainline-v5.11-rc1 commit d2641a5c3d5ecaa1078225e493c7fed821715a04 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TPP6 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- Considering only the currently supported coordination types (ANY, HW, NONE), this change only makes a difference for the ANY type, when policy->cpu is hotplugged out. In that case the new policy->cpu will be different from ((struct cppc_cpudata *)policy->driver_data)->cpu. While in this case the controls of *ANY* CPU could be used to drive frequency changes, it's more consistent to use policy->cpu as the leading CPU, as used in all other cppc_cpufreq functions. Additionally, the debug prints in cppc_set_perf() would no longer create confusion when referring to a CPU that is hotplugged out. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Zeng Heng <zengheng4@huawei.com> --- drivers/cpufreq/cppc_cpufreq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index 5f74833b3fb1..018a0a074b17 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -156,6 +156,7 @@ static int cppc_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int relation) { struct cppc_cpudata *cpu_data = all_cpu_data[policy->cpu]; + unsigned int cpu = policy->cpu; struct cpufreq_freqs freqs; u32 desired_perf; int ret = 0; @@ -170,12 +171,12 @@ static int cppc_cpufreq_set_target(struct cpufreq_policy *policy, freqs.new = target_freq; cpufreq_freq_transition_begin(policy, &freqs); - ret = cppc_set_perf(cpu_data->cpu, &cpu_data->perf_ctrls); + ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); cpufreq_freq_transition_end(policy, &freqs, ret != 0); if (ret) pr_debug("Failed to set target on CPU:%d. ret:%d\n", - cpu_data->cpu, ret); + cpu, ret); return ret; } -- 2.25.1
反馈： 您发送到kernel@openeuler.org的补丁/补丁集，已成功转换为PR！ PR链接地址： https://gitee.com/openeuler/kernel/pulls/3793 邮件列表地址：https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/M... FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/3793 Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/M...
participants (2)
-
patchwork bot -
Zeng Heng