[PATCH OLK-6.6] scsi: qla2xxx: Fix bsg_done() causing double free
From: Anil Gurumurthy <agurumurthy@marvell.com> stable inclusion from stable-v6.6.126 commit 74e7458537cd9349cf019862e51491f670871707 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13846 CVE: CVE-2025-71238 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=t... -------------------------------- commit c2c68225b1456f4d0d393b5a8778d51bb0d5b1d0 upstream. Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] <TASK> [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_copy_buffer+0xc8/0x110 [5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx] [5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx] Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done(). Cc: stable@vger.kernel.org Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com> Link: https://patch.msgid.link/20251210101604.431868-12-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Long Li <leo.lilong@huawei.com> --- drivers/scsi/qla2xxx/qla_bsg.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 10431a67d202..f43969ed87bf 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -1546,8 +1546,9 @@ qla2x00_update_optrom(struct bsg_job *bsg_job) ha->optrom_buffer = NULL; ha->optrom_state = QLA_SWAITING; mutex_unlock(&ha->optrom_mutex); - bsg_job_done(bsg_job, bsg_reply->result, - bsg_reply->reply_payload_rcv_len); + if (!rval) + bsg_job_done(bsg_job, bsg_reply->result, + bsg_reply->reply_payload_rcv_len); return rval; } @@ -2612,8 +2613,9 @@ qla2x00_manage_host_stats(struct bsg_job *bsg_job) sizeof(struct ql_vnd_mng_host_stats_resp)); bsg_reply->result = DID_OK; - bsg_job_done(bsg_job, bsg_reply->result, - bsg_reply->reply_payload_rcv_len); + if (!ret) + bsg_job_done(bsg_job, bsg_reply->result, + bsg_reply->reply_payload_rcv_len); return ret; } @@ -2702,8 +2704,9 @@ qla2x00_get_host_stats(struct bsg_job *bsg_job) bsg_job->reply_payload.sg_cnt, data, response_len); bsg_reply->result = DID_OK; - bsg_job_done(bsg_job, bsg_reply->result, - bsg_reply->reply_payload_rcv_len); + if (!ret) + bsg_job_done(bsg_job, bsg_reply->result, + bsg_reply->reply_payload_rcv_len); kfree(data); host_stat_out: @@ -2802,8 +2805,9 @@ qla2x00_get_tgt_stats(struct bsg_job *bsg_job) bsg_job->reply_payload.sg_cnt, data, response_len); bsg_reply->result = DID_OK; - bsg_job_done(bsg_job, bsg_reply->result, - bsg_reply->reply_payload_rcv_len); + if (!ret) + bsg_job_done(bsg_job, bsg_reply->result, + bsg_reply->reply_payload_rcv_len); tgt_stat_out: kfree(data); @@ -2864,8 +2868,9 @@ qla2x00_manage_host_port(struct bsg_job *bsg_job) bsg_job->reply_payload.sg_cnt, &rsp_data, sizeof(struct ql_vnd_mng_host_port_resp)); bsg_reply->result = DID_OK; - bsg_job_done(bsg_job, bsg_reply->result, - bsg_reply->reply_payload_rcv_len); + if (!ret) + bsg_job_done(bsg_job, bsg_reply->result, + bsg_reply->reply_payload_rcv_len); return ret; } @@ -3240,7 +3245,8 @@ int qla2x00_mailbox_passthru(struct bsg_job *bsg_job) bsg_job->reply_len = sizeof(*bsg_job->reply); bsg_reply->result = DID_OK << 16; - bsg_job_done(bsg_job, bsg_reply->result, bsg_reply->reply_payload_rcv_len); + if (!ret) + bsg_job_done(bsg_job, bsg_reply->result, bsg_reply->reply_payload_rcv_len); kfree(req_data); -- 2.39.2
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,已成功转换为PR! PR链接地址: https://atomgit.com/openeuler/kernel/merge_requests/21073 邮件列表地址:https://mailweb.openeuler.org/archives/list/kernel@openeuler.org/message/N5A... FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://atomgit.com/openeuler/kernel/merge_requests/21073 Mailing list address: https://mailweb.openeuler.org/archives/list/kernel@openeuler.org/message/N5A...
participants (2)
-
Long Li -
patchwork bot