[PATCH OLK-6.6 0/2] config: Update openeuler_defconfig base on current
while building arm64 & x86 kernel, ci robot complains new kconfig were introduced, but the corresponding openeuler_defconfig is not updated. Run 'make update_oedefconfig' to fix it. Zheng Zengkai (2): config: arm64: Update openeuler_defconfig base on current source code config: x86: Update openeuler_defconfig base on current source code arch/arm64/configs/openeuler_defconfig | 21 +++++++++++++++++++++ arch/x86/configs/openeuler_defconfig | 19 +++++++++++++++++++ 2 files changed, 40 insertions(+) -- 2.20.1
反馈： 您发送到kernel@openeuler.org的补丁/补丁集，已成功转换为PR！ PR链接地址： https://gitee.com/openeuler/kernel/pulls/4410 邮件列表地址：https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/P... FeedBack: The patch(es) which you have sent to kernel@openeuler.org mailing list has been converted to a pull request successfully! Pull request link: https://gitee.com/openeuler/kernel/pulls/4410 Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/P...
hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I90KHC CVE: NA --------------------------- while building arm64 kernel, ci robot complains: [WARNING] aarch64 checkdefconfig fail: CONFIG_HISILICON_ERRATUM_1980005=n CONFIG_ARM64_MPAM=n CONFIG_ACPI_APEI_GHES_NOTIFY_ALL_RAS_ERR=n CONFIG_MODULE_SIG_SM3=n CONFIG_PCP_BATCH_SCALE_MAX=5 CONFIG_ASCEND_FEATURES=n CONFIG_ASCEND_OOM=n CONFIG_PAGE_CACHE_LIMIT=n CONFIG_CLEAR_FREELIST_PAGE=n CONFIG_NETACC_BPF=y CONFIG_NETACC_TERRACE=y CONFIG_SATA_ZHAOXIN=n CONFIG_IPVLAN_L2E=n CONFIG_FB_LS2K500=n CONFIG_ARM_SMMU_V3_PM=n CONFIG_HISI_HBMDEV=n CONFIG_HISI_HBMCACHE=n CONFIG_UNICODE_NORMALIZATION_SELFTEST=n CONFIG_SECURITY_BOOT_INIT=n CONFIG_OPTIMIZE_INLINING=n The configs listed above are introduced but the openeuler_defconfig for aarch64 is not updated, you can configure and run 'make update_oedefconfig' to update it. so just run 'make update_oedefconfig' to stop the complaint. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm64/configs/openeuler_defconfig | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 9099591488c0..2ddea5999010 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -427,6 +427,7 @@ CONFIG_CAVIUM_TX2_ERRATUM_219=y CONFIG_FUJITSU_ERRATUM_010001=y CONFIG_HISILICON_ERRATUM_161600802=y CONFIG_HISILICON_ERRATUM_162100125=y +# CONFIG_HISILICON_ERRATUM_1980005 is not set CONFIG_HISILICON_ERRATUM_162100602=y CONFIG_QCOM_FALKOR_ERRATUM_1003=y CONFIG_QCOM_FALKOR_ERRATUM_1009=y @@ -519,6 +520,7 @@ CONFIG_ARM64_PTR_AUTH_KERNEL=y # ARMv8.4 architectural features # CONFIG_ARM64_AMU_EXTN=y +# CONFIG_ARM64_MPAM is not set CONFIG_ARM64_TLB_RANGE=y # end of ARMv8.4 architectural features @@ -690,6 +692,7 @@ CONFIG_ACPI_HMAT=y CONFIG_HAVE_ACPI_APEI=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y +# CONFIG_ACPI_APEI_GHES_NOTIFY_ALL_RAS_ERR is not set CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_SEA=y CONFIG_ACPI_APEI_MEMORY_FAILURE=y @@ -871,6 +874,7 @@ CONFIG_MODULE_SIG_ALL=y CONFIG_MODULE_SIG_SHA256=y # CONFIG_MODULE_SIG_SHA384 is not set # CONFIG_MODULE_SIG_SHA512 is not set +# CONFIG_MODULE_SIG_SM3 is not set CONFIG_MODULE_SIG_HASH="sha256" CONFIG_MODULE_COMPRESS_NONE=y # CONFIG_MODULE_COMPRESS_GZIP is not set @@ -1101,6 +1105,7 @@ CONFIG_DEVICE_MIGRATION=y CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y CONFIG_ARCH_ENABLE_THP_MIGRATION=y CONFIG_CONTIG_ALLOC=y +CONFIG_PCP_BATCH_SCALE_MAX=5 CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y @@ -1154,6 +1159,10 @@ CONFIG_LRU_GEN=y CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y CONFIG_PER_VMA_LOCK=y CONFIG_LOCK_MM_AND_FIND_VMA=y +# CONFIG_ASCEND_FEATURES is not set +# CONFIG_ASCEND_OOM is not set +# CONFIG_PAGE_CACHE_LIMIT is not set +# CONFIG_CLEAR_FREELIST_PAGE is not set CONFIG_MEMORY_RELIABLE=y CONFIG_DYNAMIC_POOL=y CONFIG_ETMEM_SCAN=m @@ -1907,6 +1916,8 @@ CONFIG_PAGE_POOL=y # CONFIG_PAGE_POOL_STATS is not set CONFIG_FAILOVER=m CONFIG_ETHTOOL_NETLINK=y +CONFIG_NETACC_BPF=y +CONFIG_NETACC_TERRACE=y # # Device Drivers @@ -2592,6 +2603,7 @@ CONFIG_ATA_PIIX=m # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_ZHAOXIN is not set # # PATA SFF controllers with BMDMA @@ -2735,6 +2747,7 @@ CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m CONFIG_NET_TEAM_MODE_LOADBALANCE=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m +# CONFIG_IPVLAN_L2E is not set CONFIG_IPVLAN_L3S=y CONFIG_IPVLAN=m CONFIG_IPVTAP=m @@ -5445,6 +5458,7 @@ CONFIG_FB_EFI=y CONFIG_FB_SIMPLE=y CONFIG_FB_SSD1307=m # CONFIG_FB_SM712 is not set +# CONFIG_FB_LS2K500 is not set CONFIG_FB_CORE=y CONFIG_FB_NOTIFY=y # CONFIG_FIRMWARE_EDID is not set @@ -6502,6 +6516,7 @@ CONFIG_ARM_SMMU_QCOM=y # CONFIG_ARM_SMMU_QCOM_DEBUG is not set CONFIG_ARM_SMMU_V3=y CONFIG_ARM_SMMU_V3_SVA=y +# CONFIG_ARM_SMMU_V3_PM is not set # CONFIG_QCOM_IOMMU is not set # CONFIG_VIRTIO_IOMMU is not set CONFIG_SMMU_BYPASS_DEV=y @@ -6552,6 +6567,8 @@ CONFIG_SMMU_BYPASS_DEV=y # # Hisilicon SoC drivers # +# CONFIG_HISI_HBMDEV is not set +# CONFIG_HISI_HBMCACHE is not set CONFIG_KUNPENG_HCCS=m # end of Hisilicon SoC drivers @@ -7145,6 +7162,7 @@ CONFIG_NLS_UTF8=m CONFIG_NLS_UCS2_UTILS=m # CONFIG_DLM is not set CONFIG_UNICODE=y +# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set CONFIG_IO_WQ=y # end of File systems @@ -7262,6 +7280,8 @@ CONFIG_LIST_HARDENED=y CONFIG_RANDSTRUCT_NONE=y # end of Kernel hardening options + +# CONFIG_SECURITY_BOOT_INIT is not set # end of Security options CONFIG_XOR_BLOCKS=m @@ -7769,6 +7789,7 @@ CONFIG_FRAME_WARN=2048 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set # CONFIG_HEADERS_INSTALL is not set +# CONFIG_OPTIMIZE_INLINING is not set CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_SECTION_MISMATCH_WARN_ONLY=y # CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set -- 2.20.1
hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I90KKS CVE: NA --------------------------- while building x86 kernel, ci robot complains: [WARNING] x86_64 checkdefconfig fail CONFIG_MICROCODE_LATE_FORCE_MINREV=n CONFIG_MODULE_SIG_SM3=n CONFIG_PCP_BATCH_SCALE_MAX=5 CONFIG_ASCEND_OOM=n CONFIG_PAGE_CACHE_LIMIT=n CONFIG_NETACC_BPF=y CONFIG_NETACC_TERRACE=y CONFIG_IPVLAN_L2E=n CONFIG_FB_LS2K500=n CONFIG_CPU_INSPECT=n CONFIG_UNICODE_NORMALIZATION_SELFTEST=n CONFIG_SECURITY_BOOT_INIT=n CONFIG_OPTIMIZE_INLINING=n The configs listed above are introduced but the openeuler_defconfig for x86_64 is not updated, you can configure and run 'make update_oedefconfig' to update it. so just run 'make update_oedefconfig' to stop the complaint. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/x86/configs/openeuler_defconfig | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index b0facd251eca..77f0c7ae79c1 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -442,6 +442,7 @@ CONFIG_X86_VSYSCALL_EMULATION=y CONFIG_X86_IOPL_IOPERM=y CONFIG_MICROCODE=y CONFIG_MICROCODE_LATE_LOADING=y +# CONFIG_MICROCODE_LATE_FORCE_MINREV is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_X86_5LEVEL=y @@ -934,6 +935,7 @@ CONFIG_MODULE_SIG_ALL=y CONFIG_MODULE_SIG_SHA256=y # CONFIG_MODULE_SIG_SHA384 is not set # CONFIG_MODULE_SIG_SHA512 is not set +# CONFIG_MODULE_SIG_SM3 is not set CONFIG_MODULE_SIG_HASH="sha256" CONFIG_MODULE_COMPRESS_NONE=y # CONFIG_MODULE_COMPRESS_GZIP is not set @@ -1112,6 +1114,7 @@ CONFIG_DEVICE_MIGRATION=y CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y CONFIG_ARCH_ENABLE_THP_MIGRATION=y CONFIG_CONTIG_ALLOC=y +CONFIG_PCP_BATCH_SCALE_MAX=5 CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y @@ -1168,6 +1171,8 @@ CONFIG_LRU_GEN=y CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y CONFIG_PER_VMA_LOCK=y CONFIG_LOCK_MM_AND_FIND_VMA=y +# CONFIG_ASCEND_OOM is not set +# CONFIG_PAGE_CACHE_LIMIT is not set CONFIG_DYNAMIC_POOL=y CONFIG_ETMEM_SCAN=m CONFIG_ETMEM_SWAP=m @@ -1966,6 +1971,8 @@ CONFIG_PAGE_POOL=y # CONFIG_PAGE_POOL_STATS is not set CONFIG_FAILOVER=m CONFIG_ETHTOOL_NETLINK=y +CONFIG_NETACC_BPF=y +CONFIG_NETACC_TERRACE=y # # Device Drivers @@ -2761,6 +2768,7 @@ CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m CONFIG_NET_TEAM_MODE_LOADBALANCE=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m +# CONFIG_IPVLAN_L2E is not set CONFIG_IPVLAN_L3S=y CONFIG_IPVLAN=m CONFIG_IPVTAP=m @@ -5657,6 +5665,7 @@ CONFIG_FB_HYPERV=m # CONFIG_FB_SIMPLE is not set # CONFIG_FB_SSD1307 is not set # CONFIG_FB_SM712 is not set +# CONFIG_FB_LS2K500 is not set CONFIG_FB_CORE=y CONFIG_FB_NOTIFY=y # CONFIG_FIRMWARE_EDID is not set @@ -8006,6 +8015,12 @@ CONFIG_INTEL_TH_PTI=m # CONFIG_MOST is not set # CONFIG_PECI is not set # CONFIG_HTE is not set + +# +# CPU Inspect +# +# CONFIG_CPU_INSPECT is not set +# end of CPU Inspect # end of Device Drivers # @@ -8337,6 +8352,7 @@ CONFIG_NLS_UCS2_UTILS=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y CONFIG_UNICODE=y +# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set CONFIG_IO_WQ=y # end of File systems @@ -8455,6 +8471,8 @@ CONFIG_LIST_HARDENED=y CONFIG_RANDSTRUCT_NONE=y # end of Kernel hardening options + +# CONFIG_SECURITY_BOOT_INIT is not set # end of Security options CONFIG_XOR_BLOCKS=m @@ -8938,6 +8956,7 @@ CONFIG_FRAME_WARN=2048 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set # CONFIG_HEADERS_INSTALL is not set +# CONFIG_OPTIMIZE_INLINING is not set CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_SECTION_MISMATCH_WARN_ONLY=y CONFIG_OBJTOOL=y -- 2.20.1
participants (2)
-
patchwork bot -
Zheng Zengkai