From: Dominique Martinet <asmadeus@codewreck.org> commit 436e980e2ed526832de822cbf13c317a458b78e1 upstream. depmod is not guaranteed to be in /sbin, just let make look for it in the path like all the other invoked programs Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index b2c939f289c2..b933b9f7517f 100644 --- a/Makefile +++ b/Makefile @@ -400,7 +400,7 @@ YACC = bison AWK = awk GENKSYMS = scripts/genksyms/genksyms INSTALLKERNEL := installkernel -DEPMOD = /sbin/depmod +DEPMOD = depmod PERL = perl PYTHON = python PYTHON2 = python2 -- 2.25.1

From: Bean Huo <beanhuo@micron.com> [ Upstream commit 1fa0570002e3f66db9b58c32c60de4183b857a19 ] Change dev_err() print message from "dme-reset" to "dme_enable" in function ufshcd_dme_enable(). Link: https://lore.kernel.org/r/20201207190137.6858-3-huobean@gmail.com Acked-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/scsi/ufs/ufshcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 61b1eae42ea8..40f478c4d118 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -3583,7 +3583,7 @@ static int ufshcd_dme_enable(struct ufs_hba *hba) ret = ufshcd_send_uic_cmd(hba, &uic_cmd); if (ret) dev_err(hba->dev, - "dme-reset: error code %d\n", ret); + "dme-enable: error code %d\n", ret); return ret; } -- 2.25.1

From: Bart Van Assche <bvanassche@acm.org> [ Upstream commit 96d86e6a80a3ab9aff81d12f9f1f2a0da2917d38 ] RQF_PREEMPT is used for two different purposes in the legacy IDE code: 1. To mark power management requests. 2. To mark requests that should preempt another request. An (old) explanation of that feature is as follows: "The IDE driver in the Linux kernel normally uses a series of busywait delays during its initialization. When the driver executes these busywaits, the kernel does nothing for the duration of the wait. The time spent in these waits could be used for other initialization activities, if they could be run concurrently with these waits. More specifically, busywait-style delays such as udelay() in module init functions inhibit kernel preemption because the Big Kernel Lock is held, while yielding APIs such as schedule_timeout() allow preemption. This is true because the kernel handles the BKL specially and releases and reacquires it across reschedules allowed by the current thread. This IDE-preempt specification requires that the driver eliminate these busywaits and replace them with a mechanism that allows other work to proceed while the IDE driver is initializing." Since I haven't found an implementation of (2), do not set the PREEMPT flag for sense requests. This patch causes sense requests to be postponed while a drive is suspended instead of being submitted to ide_queue_rq(). If it would ever be necessary to restore the IDE PREEMPT functionality, that can be done by introducing a new flag in struct ide_request. Link: https://lore.kernel.org/r/20201209052951.16136-4-bvanassche@acm.org Cc: David S. Miller <davem@davemloft.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Can Guo <cang@codeaurora.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/ide/ide-atapi.c | 1 - drivers/ide/ide-io.c | 5 ----- 2 files changed, 6 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 8b2b72b93885..4224c4dd8963 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -213,7 +213,6 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq) sense_rq->rq_disk = rq->rq_disk; sense_rq->cmd_flags = REQ_OP_DRV_IN; ide_req(sense_rq)->type = ATA_PRIV_SENSE; - sense_rq->rq_flags |= RQF_PREEMPT; req->cmd[0] = GPCMD_REQUEST_SENSE; req->cmd[4] = cmd_len; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 0d93e0cfbeaf..438176084610 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -527,11 +527,6 @@ void do_ide_request(struct request_queue *q) * above to return us whatever is in the queue. Since we call * ide_do_request() ourselves, we end up taking requests while * the queue is blocked... - * - * We let requests forced at head of queue with ide-preempt - * though. I hope that doesn't happen too much, hopefully not - * unless the subdriver triggers such a thing in its own PM - * state machine. */ if ((drive->dev_flags & IDE_DFLAG_BLOCKED) && ata_pm_request(rq) == 0 && -- 2.25.1

From: Huang Shijie <sjhuang@iluvatar.ai> [ Upstream commit 36845663843fc59c5d794e3dc0641472e3e572da ] Some graphic card has very big memory on chip, such as 32G bytes. In the following case, it will cause overflow: pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE); ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE); va = gen_pool_alloc(pool, SZ_4G); The overflow occurs in gen_pool_alloc_algo_owner(): .... size = nbits << order; .... The @nbits is "int" type, so it will overflow. Then the gen_pool_avail() will return the wrong value. This patch converts some "int" to "unsigned long", and changes the compare code in while. Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- lib/genalloc.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/lib/genalloc.c b/lib/genalloc.c index 7e85d1e37a6e..0b8ee173cf3a 100644 --- a/lib/genalloc.c +++ b/lib/genalloc.c @@ -83,14 +83,14 @@ static int clear_bits_ll(unsigned long *addr, unsigned long mask_to_clear) * users set the same bit, one user will return remain bits, otherwise * return 0. */ -static int bitmap_set_ll(unsigned long *map, int start, int nr) +static int bitmap_set_ll(unsigned long *map, unsigned long start, unsigned long nr) { unsigned long *p = map + BIT_WORD(start); - const int size = start + nr; + const unsigned long size = start + nr; int bits_to_set = BITS_PER_LONG - (start % BITS_PER_LONG); unsigned long mask_to_set = BITMAP_FIRST_WORD_MASK(start); - while (nr - bits_to_set >= 0) { + while (nr >= bits_to_set) { if (set_bits_ll(p, mask_to_set)) return nr; nr -= bits_to_set; @@ -118,14 +118,15 @@ static int bitmap_set_ll(unsigned long *map, int start, int nr) * users clear the same bit, one user will return remain bits, * otherwise return 0. */ -static int bitmap_clear_ll(unsigned long *map, int start, int nr) +static unsigned long +bitmap_clear_ll(unsigned long *map, unsigned long start, unsigned long nr) { unsigned long *p = map + BIT_WORD(start); - const int size = start + nr; + const unsigned long size = start + nr; int bits_to_clear = BITS_PER_LONG - (start % BITS_PER_LONG); unsigned long mask_to_clear = BITMAP_FIRST_WORD_MASK(start); - while (nr - bits_to_clear >= 0) { + while (nr >= bits_to_clear) { if (clear_bits_ll(p, mask_to_clear)) return nr; nr -= bits_to_clear; @@ -184,8 +185,8 @@ int gen_pool_add_virt(struct gen_pool *pool, unsigned long virt, phys_addr_t phy size_t size, int nid) { struct gen_pool_chunk *chunk; - int nbits = size >> pool->min_alloc_order; - int nbytes = sizeof(struct gen_pool_chunk) + + unsigned long nbits = size >> pool->min_alloc_order; + unsigned long nbytes = sizeof(struct gen_pool_chunk) + BITS_TO_LONGS(nbits) * sizeof(long); chunk = vzalloc_node(nbytes, nid); @@ -242,7 +243,7 @@ void gen_pool_destroy(struct gen_pool *pool) struct list_head *_chunk, *_next_chunk; struct gen_pool_chunk *chunk; int order = pool->min_alloc_order; - int bit, end_bit; + unsigned long bit, end_bit; list_for_each_safe(_chunk, _next_chunk, &pool->chunks) { chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk); @@ -293,7 +294,7 @@ unsigned long gen_pool_alloc_algo(struct gen_pool *pool, size_t size, struct gen_pool_chunk *chunk; unsigned long addr = 0; int order = pool->min_alloc_order; - int nbits, start_bit, end_bit, remain; + unsigned long nbits, start_bit, end_bit, remain; #ifndef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG BUG_ON(in_nmi()); @@ -376,7 +377,7 @@ void gen_pool_free(struct gen_pool *pool, unsigned long addr, size_t size) { struct gen_pool_chunk *chunk; int order = pool->min_alloc_order; - int start_bit, nbits, remain; + unsigned long start_bit, nbits, remain; #ifndef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG BUG_ON(in_nmi()); @@ -638,7 +639,7 @@ unsigned long gen_pool_best_fit(unsigned long *map, unsigned long size, index = bitmap_find_next_zero_area(map, size, start, nr, 0); while (index < size) { - int next_bit = find_next_bit(map, size, index + nr); + unsigned long next_bit = find_next_bit(map, size, index + nr); if ((next_bit - index) < len) { len = next_bit - index; start_bit = index; -- 2.25.1

From: Alexey Dobriyan <adobriyan@gmail.com> [ Upstream commit e06689bf57017ac022ccf0f2a5071f760821ce0f ] Currently gluing PDE into global /proc tree is done under lock, but changing ->nlink is not. Additionally struct proc_dir_entry::nlink is not atomic so updates can be lost. Link: http://lkml.kernel.org/r/20190925202436.GA17388@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- fs/proc/generic.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index e39bac94dead..7820fe524cb0 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -137,8 +137,12 @@ static int proc_getattr(const struct path *path, struct kstat *stat, { struct inode *inode = d_inode(path->dentry); struct proc_dir_entry *de = PDE(inode); - if (de && de->nlink) - set_nlink(inode, de->nlink); + if (de) { + nlink_t nlink = READ_ONCE(de->nlink); + if (nlink > 0) { + set_nlink(inode, nlink); + } + } generic_fillattr(inode, stat); return 0; @@ -361,6 +365,7 @@ struct proc_dir_entry *proc_register(struct proc_dir_entry *dir, write_unlock(&proc_subdir_lock); goto out_free_inum; } + dir->nlink++; write_unlock(&proc_subdir_lock); return dp; @@ -471,10 +476,7 @@ struct proc_dir_entry *proc_mkdir_data(const char *name, umode_t mode, ent->data = data; ent->proc_fops = &proc_dir_operations; ent->proc_iops = &proc_dir_inode_operations; - parent->nlink++; ent = proc_register(parent, ent); - if (!ent) - parent->nlink--; } return ent; } @@ -504,10 +506,7 @@ struct proc_dir_entry *proc_create_mount_point(const char *name) ent->data = NULL; ent->proc_fops = NULL; ent->proc_iops = NULL; - parent->nlink++; ent = proc_register(parent, ent); - if (!ent) - parent->nlink--; } return ent; } @@ -665,8 +664,12 @@ void remove_proc_entry(const char *name, struct proc_dir_entry *parent) len = strlen(fn); de = pde_subdir_find(parent, fn, len); - if (de) + if (de) { rb_erase(&de->subdir_node, &parent->subdir); + if (S_ISDIR(de->mode)) { + parent->nlink--; + } + } write_unlock(&proc_subdir_lock); if (!de) { WARN(1, "name '%s'\n", name); @@ -675,9 +678,6 @@ void remove_proc_entry(const char *name, struct proc_dir_entry *parent) proc_entry_rundown(de); - if (S_ISDIR(de->mode)) - parent->nlink--; - de->nlink = 0; WARN(pde_subdir_first(de), "%s: removing non-empty directory '%s/%s', leaking at least '%s'\n", __func__, de->parent->name, de->name, pde_subdir_first(de)->name); @@ -713,13 +713,12 @@ int remove_proc_subtree(const char *name, struct proc_dir_entry *parent) de = next; continue; } - write_unlock(&proc_subdir_lock); - - proc_entry_rundown(de); next = de->parent; if (S_ISDIR(de->mode)) next->nlink--; - de->nlink = 0; + write_unlock(&proc_subdir_lock); + + proc_entry_rundown(de); if (de == root) break; pde_put(de); -- 2.25.1

From: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> [ Upstream commit 3ac874fa84d1baaf0c0175f2a1499f5d88d528b2 ] When removing VFs for PF added to bridge there was an error I40E_AQ_RC_EINVAL. It was caused by not properly resetting and reinitializing PF when adding/removing VFs. Changed how reset is performed when adding/removing VFs to properly reinitialize PFs VSI. Fixes: fc60861e9b00 ("i40e: start up in VEPA mode by default") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ethernet/intel/i40e/i40e.h | 3 +++ drivers/net/ethernet/intel/i40e/i40e_main.c | 10 ++++++++++ drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 4 ++-- 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index 1752fea024eb..6fcf51baca13 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -127,6 +127,7 @@ enum i40e_state_t { __I40E_RESET_INTR_RECEIVED, __I40E_REINIT_REQUESTED, __I40E_PF_RESET_REQUESTED, + __I40E_PF_RESET_AND_REBUILD_REQUESTED, __I40E_CORE_RESET_REQUESTED, __I40E_GLOBAL_RESET_REQUESTED, __I40E_EMP_RESET_REQUESTED, @@ -154,6 +155,8 @@ enum i40e_state_t { }; #define I40E_PF_RESET_FLAG BIT_ULL(__I40E_PF_RESET_REQUESTED) +#define I40E_PF_RESET_AND_REBUILD_FLAG \ + BIT_ULL(__I40E_PF_RESET_AND_REBUILD_REQUESTED) /* VSI state flags */ enum i40e_vsi_state_t { diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 985601a65def..a728b6a7872c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -42,6 +42,8 @@ static int i40e_setup_misc_vector(struct i40e_pf *pf); static void i40e_determine_queue_usage(struct i40e_pf *pf); static int i40e_setup_pf_filter_control(struct i40e_pf *pf); static void i40e_prep_for_reset(struct i40e_pf *pf, bool lock_acquired); +static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit, + bool lock_acquired); static int i40e_reset(struct i40e_pf *pf); static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired); static void i40e_fdir_sb_setup(struct i40e_pf *pf); @@ -7929,6 +7931,14 @@ void i40e_do_reset(struct i40e_pf *pf, u32 reset_flags, bool lock_acquired) dev_dbg(&pf->pdev->dev, "PFR requested\n"); i40e_handle_reset_warning(pf, lock_acquired); + } else if (reset_flags & I40E_PF_RESET_AND_REBUILD_FLAG) { + /* Request a PF Reset + * + * Resets PF and reinitializes PFs VSI. + */ + i40e_prep_for_reset(pf, lock_acquired); + i40e_reset_and_rebuild(pf, true, lock_acquired); + } else if (reset_flags & BIT_ULL(__I40E_REINIT_REQUESTED)) { int v; diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 5b2395bd6ed8..9154abe13b93 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1573,7 +1573,7 @@ int i40e_pci_sriov_configure(struct pci_dev *pdev, int num_vfs) if (num_vfs) { if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) { pf->flags |= I40E_FLAG_VEB_MODE_ENABLED; - i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG); + i40e_do_reset_safe(pf, I40E_PF_RESET_AND_REBUILD_FLAG); } ret = i40e_pci_sriov_enable(pdev, num_vfs); goto sriov_configure_out; @@ -1582,7 +1582,7 @@ int i40e_pci_sriov_configure(struct pci_dev *pdev, int num_vfs) if (!pci_vfs_assigned(pf->pdev)) { i40e_free_vfs(pf); pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED; - i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG); + i40e_do_reset_safe(pf, I40E_PF_RESET_AND_REBUILD_FLAG); } else { dev_warn(&pdev->dev, "Unable to free VFs because some are assigned to VMs.\n"); ret = -EINVAL; -- 2.25.1

From: Stefan Chulski <stefanc@marvell.com> [ Upstream commit fec6079b2eeab319d9e3d074f54d3b6f623e9701 ] Current PPPoE+IPv6 entry is jumping to 'next-hdr' field and not to 'DIP' field as done for IPv4. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Liron Himi <lironh@marvell.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608230266-22111-1-git-send-email-stefanc@marvell.... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c index f069593d7e50..a30eb90ba3d2 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c @@ -1680,8 +1680,9 @@ static int mvpp2_prs_pppoe_init(struct mvpp2 *priv) mvpp2_prs_sram_next_lu_set(&pe, MVPP2_PRS_LU_IP6); mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_L3_IP6, MVPP2_PRS_RI_L3_PROTO_MASK); - /* Skip eth_type + 4 bytes of IPv6 header */ - mvpp2_prs_sram_shift_set(&pe, MVPP2_ETH_TYPE_LEN + 4, + /* Jump to DIP of IPV6 header */ + mvpp2_prs_sram_shift_set(&pe, MVPP2_ETH_TYPE_LEN + 8 + + MVPP2_MAX_L3_ADDR_SIZE, MVPP2_PRS_SRAM_OP_SEL_SHIFT_ADD); /* Set L3 offset */ mvpp2_prs_sram_offset_set(&pe, MVPP2_PRS_SRAM_UDF_TYPE_L3, -- 2.25.1

From: Rasmus Villemoes <rasmus.villemoes@prevas.dk> [ Upstream commit 1385ae5c30f238f81bc6528d897c6d7a0816783f ] All the buffers and registers are already set up appropriately for an MTU slightly above 1500, so we just need to expose this to the networking stack. AFAICT, there's no need to implement .ndo_change_mtu when the receive buffers are always set up to support the max_mtu. This fixes several warnings during boot on our mpc8309-board with an embedded mv88e6250 switch: mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0 ... mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4 ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead The last line explains what the DSA stack tries to do: achieving an MTU of 1500 on-the-wire requires that the master netdevice connected to the CPU port supports an MTU of 1500+the tagging overhead. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ethernet/freescale/ucc_geth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 04ebfd543867..d43173917ce4 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -3902,6 +3902,7 @@ static int ucc_geth_probe(struct platform_device* ofdev) INIT_WORK(&ugeth->timeout_work, ucc_geth_timeout_work); netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, 64); dev->mtu = 1500; + dev->max_mtu = 1518; ugeth->msg_enable = netif_msg_init(debug.msg_enable, UGETH_MSG_DEFAULT); ugeth->phy_interface = phy_interface; -- 2.25.1

From: Stefan Chulski <stefanc@marvell.com> [ Upstream commit 2575bc1aa9d52a62342b57a0b7d0a12146cf6aed ] During GoP port 2 Networking Complex Control mode of operation configurations, also GoP port 3 mode of operation was wrongly set. Patch removes these configurations. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.c... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index e4e43519710d..986292a34f4f 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -954,7 +954,7 @@ static void mvpp22_gop_init_rgmii(struct mvpp2_port *port) regmap_read(priv->sysctrl_base, GENCONF_CTRL0, &val); if (port->gop_id == 2) - val |= GENCONF_CTRL0_PORT0_RGMII | GENCONF_CTRL0_PORT1_RGMII; + val |= GENCONF_CTRL0_PORT0_RGMII; else if (port->gop_id == 3) val |= GENCONF_CTRL0_PORT1_RGMII_MII; regmap_write(priv->sysctrl_base, GENCONF_CTRL0, val); -- 2.25.1

From: Jeff Dike <jdike@akamai.com> [ Upstream commit de33212f768c5d9e2fe791b008cb26f92f0aa31c ] virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS and CONFIG_HOTPLUG are enabled. The path is: virtnet_set_channels - calls get_online_cpus(), which is a trivial wrapper around cpus_read_lock() netif_set_real_num_tx_queues netif_reset_xps_queues_gt netif_reset_xps_queues - calls cpus_read_lock() This call chain and potential deadlock happens when the number of TX queues is reduced. This commit the removes netif_set_real_num_[tr]x_queues calls from inside the get/put_online_cpus section, as they don't require that it be held. Fixes: 47be24796c13 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive") Signed-off-by: Jeff Dike <jdike@akamai.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20201223025421.671-1-jdike@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/virtio_net.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index b21223be93c8..d41d5f63f211 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2077,14 +2077,16 @@ static int virtnet_set_channels(struct net_device *dev, get_online_cpus(); err = _virtnet_set_queues(vi, queue_pairs); - if (!err) { - netif_set_real_num_tx_queues(dev, queue_pairs); - netif_set_real_num_rx_queues(dev, queue_pairs); - - virtnet_set_affinity(vi); + if (err) { + put_online_cpus(); + goto err; } + virtnet_set_affinity(vi); put_online_cpus(); + netif_set_real_num_tx_queues(dev, queue_pairs); + netif_set_real_num_rx_queues(dev, queue_pairs); + err: return err; } -- 2.25.1

From: Dinghao Liu <dinghao.liu@zju.edu.cn> [ Upstream commit 5d41f9b7ee7a5a5138894f58846a4ffed601498a ] When mdiobus_register() fails, priv->mdio allocated by mdiobus_alloc() has not been freed, which leads to memleak. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201223110615.31389-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ethernet/ethoc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index 60da0499ad66..a2280c4be0f5 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -1213,7 +1213,7 @@ static int ethoc_probe(struct platform_device *pdev) ret = mdiobus_register(priv->mdio); if (ret) { dev_err(&netdev->dev, "failed to register MDIO bus\n"); - goto free2; + goto free3; } ret = ethoc_mdio_probe(netdev); @@ -1245,6 +1245,7 @@ static int ethoc_probe(struct platform_device *pdev) netif_napi_del(&priv->napi); error: mdiobus_unregister(priv->mdio); +free3: mdiobus_free(priv->mdio); free2: clk_disable_unprepare(priv->clk); -- 2.25.1

From: Antoine Tenart <atenart@kernel.org> [ Upstream commit fb25038586d0064123e393cadf1fadd70a9df97a ] Accesses to dev->xps_cpus_map (when using dev->num_tc) should be protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't see an actual bug being triggered, but let's be safe here and take the rtnl lock while accessing the map in sysfs. Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- net/core/net-sysfs.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index fc70692c70df..4c7bb4b93e61 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -1254,8 +1254,8 @@ static const struct attribute_group dql_group = { static ssize_t xps_cpus_show(struct netdev_queue *queue, char *buf) { + int cpu, len, ret, num_tc = 1, tc = 0; struct net_device *dev = queue->dev; - int cpu, len, num_tc = 1, tc = 0; struct xps_dev_maps *dev_maps; cpumask_var_t mask; unsigned long index; @@ -1265,22 +1265,31 @@ static ssize_t xps_cpus_show(struct netdev_queue *queue, index = get_netdev_queue_index(queue); + if (!rtnl_trylock()) + return restart_syscall(); + if (dev->num_tc) { /* Do not allow XPS on subordinate device directly */ num_tc = dev->num_tc; - if (num_tc < 0) - return -EINVAL; + if (num_tc < 0) { + ret = -EINVAL; + goto err_rtnl_unlock; + } /* If queue belongs to subordinate dev use its map */ dev = netdev_get_tx_queue(dev, index)->sb_dev ? : dev; tc = netdev_txq_to_tc(dev, index); - if (tc < 0) - return -EINVAL; + if (tc < 0) { + ret = -EINVAL; + goto err_rtnl_unlock; + } } - if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) - return -ENOMEM; + if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) { + ret = -ENOMEM; + goto err_rtnl_unlock; + } rcu_read_lock(); dev_maps = rcu_dereference(dev->xps_cpus_map); @@ -1303,9 +1312,15 @@ static ssize_t xps_cpus_show(struct netdev_queue *queue, } rcu_read_unlock(); + rtnl_unlock(); + len = snprintf(buf, PAGE_SIZE, "%*pb\n", cpumask_pr_args(mask)); free_cpumask_var(mask); return len < PAGE_SIZE ? len : -EINVAL; + +err_rtnl_unlock: + rtnl_unlock(); + return ret; } static ssize_t xps_cpus_store(struct netdev_queue *queue, -- 2.25.1

From: Yunjian Wang <wangyunjian@huawei.com> [ Upstream commit 950271d7cc0b4546af3549d8143c4132d6e1f138 ] Currently the tun_napi_alloc_frags() function returns -ENOMEM when the number of iovs exceeds MAX_SKB_FRAGS + 1. However this is inappropriate, we should use -EMSGSIZE instead of -ENOMEM. The following distinctions are matters: 1. the caller need to drop the bad packet when -EMSGSIZE is returned, which means meeting a persistent failure. 2. the caller can try again when -ENOMEM is returned, which means meeting a transient failure. Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/1608864736-24332-1-git-send-email-wangyunjian@huaw... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/tun.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 008bdd186344..66d024b0ce5e 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1450,7 +1450,7 @@ static struct sk_buff *tun_napi_alloc_frags(struct tun_file *tfile, int i; if (it->nr_segs > MAX_SKB_FRAGS + 1) - return ERR_PTR(-ENOMEM); + return ERR_PTR(-EMSGSIZE); local_bh_disable(); skb = napi_get_frags(&tfile->napi); -- 2.25.1

From: Yunjian Wang <wangyunjian@huawei.com> [ Upstream commit 5ede3ada3da7f050519112b81badc058190b9f9f ] The function skb_copy() could return NULL, the return value need to be checked. Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c index b617a25e6f45..497e03525576 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c @@ -419,6 +419,10 @@ static void __lb_other_process(struct hns_nic_ring_data *ring_data, /* for mutl buffer*/ new_skb = skb_copy(skb, GFP_ATOMIC); dev_kfree_skb_any(skb); + if (!new_skb) { + netdev_err(ndev, "skb alloc failed\n"); + return; + } skb = new_skb; check_ok = 0; -- 2.25.1

From: Xie He <xie.he.0141@gmail.com> [ Upstream commit 1fef73597fa545c35fddc953979013882fbd4e55 ] ppp_cp_event is called directly or indirectly by ppp_rx with "ppp->lock" held. It may call mod_timer to add a new timer. However, at the same time ppp_timer may be already running and waiting for "ppp->lock". In this case, there's no need for ppp_timer to continue running and it can just exit. If we let ppp_timer continue running, it may call add_timer. This causes kernel panic because add_timer can't be called with a timer pending. This patch fixes this problem. Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.") Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/wan/hdlc_ppp.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c index 20d9b6585fba..d67623d61dc4 100644 --- a/drivers/net/wan/hdlc_ppp.c +++ b/drivers/net/wan/hdlc_ppp.c @@ -572,6 +572,13 @@ static void ppp_timer(struct timer_list *t) unsigned long flags; spin_lock_irqsave(&ppp->lock, flags); + /* mod_timer could be called after we entered this function but + * before we got the lock. + */ + if (timer_pending(&proto->timer)) { + spin_unlock_irqrestore(&ppp->lock, flags); + return; + } switch (proto->state) { case STOPPING: case REQ_SENT: -- 2.25.1

From: Bjørn Mork <bjorn@mork.no> [ Upstream commit cfd82dfc9799c53ef109343a23af006a0f6860a9 ] New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA, and ff/ff/ff for RMNET/QMI. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0620 Rev= 4.09 S: Manufacturer=Quectel S: Product=EM160R-GL S: SerialNumber=e31cedc1 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.no Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index ebd630a94571..1b48d71dbc28 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -995,6 +995,7 @@ static const struct usb_device_id products[] = { {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0125)}, /* Quectel EC25, EC20 R2.0 Mini PCIe */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0306)}, /* Quectel EP06/EG06/EM06 */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)}, /* Quectel EG12/EM12 */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)}, /* Quectel EM160R-GL */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)}, /* Quectel RM500Q-GL */ /* 3. Combined interface devices matching on interface number */ -- 2.25.1

From: Yunjian Wang <wangyunjian@huawei.com> [ Upstream commit 01e31bea7e622f1890c274f4aaaaf8bccd296aa5 ] Currently the vhost_zerocopy_callback() maybe be called to decrease the refcount when sendmsg fails in tun. The error handling in vhost handle_tx_zerocopy() will try to decrease the same refcount again. This is wrong. To fix this issue, we only call vhost_net_ubuf_put() when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS. Fixes: bab632d69ee4 ("vhost: vhost TX zero-copy support") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huaw... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/vhost/net.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 88c8c158ec25..0c7bbc92b22a 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -613,6 +613,7 @@ static void handle_tx_zerocopy(struct vhost_net *net, struct socket *sock) size_t len, total_len = 0; int err; struct vhost_net_ubuf_ref *uninitialized_var(ubufs); + struct ubuf_info *ubuf; bool zcopy_used; int sent_pkts = 0; @@ -645,9 +646,7 @@ static void handle_tx_zerocopy(struct vhost_net *net, struct socket *sock) /* use msg_control to pass vhost zerocopy ubuf info to skb */ if (zcopy_used) { - struct ubuf_info *ubuf; ubuf = nvq->ubuf_info + nvq->upend_idx; - vq->heads[nvq->upend_idx].id = cpu_to_vhost32(vq, head); vq->heads[nvq->upend_idx].len = VHOST_DMA_IN_PROGRESS; ubuf->callback = vhost_zerocopy_callback; @@ -675,7 +674,8 @@ static void handle_tx_zerocopy(struct vhost_net *net, struct socket *sock) err = sock->ops->sendmsg(sock, &msg, len); if (unlikely(err < 0)) { if (zcopy_used) { - vhost_net_ubuf_put(ubufs); + if (vq->heads[ubuf->desc].len == VHOST_DMA_IN_PROGRESS) + vhost_net_ubuf_put(ubufs); nvq->upend_idx = ((unsigned)nvq->upend_idx - 1) % UIO_MAXIOV; } -- 2.25.1

From: Antoine Tenart <atenart@kernel.org> [ Upstream commit 2d57b4f142e0b03e854612b8e28978935414bced ] Two race conditions can be triggered when storing xps rxqs, resulting in various oops and invalid memory accesses: 1. Calling netdev_set_num_tc while netif_set_xps_queue: - netif_set_xps_queue uses dev->tc_num as one of the parameters to compute the size of new_dev_maps when allocating it. dev->tc_num is also used to access the map, and the compiler may generate code to retrieve this field multiple times in the function. - netdev_set_num_tc sets dev->tc_num. If new_dev_maps is allocated using dev->tc_num and then dev->tc_num is set to a higher value through netdev_set_num_tc, later accesses to new_dev_maps in netif_set_xps_queue could lead to accessing memory outside of new_dev_maps; triggering an oops. 2. Calling netif_set_xps_queue while netdev_set_num_tc is running: 2.1. netdev_set_num_tc starts by resetting the xps queues, dev->tc_num isn't updated yet. 2.2. netif_set_xps_queue is called, setting up the map with the *old* dev->num_tc. 2.3. netdev_set_num_tc updates dev->tc_num. 2.4. Later accesses to the map lead to out of bound accesses and oops. A similar issue can be found with netdev_reset_tc. One way of triggering this is to set an iface up (for which the driver uses netdev_set_num_tc in the open path, such as bnx2x) and writing to xps_rxqs in a concurrent thread. With the right timing an oops is triggered. Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc and netdev_reset_tc should be mutually exclusive. We do that by taking the rtnl lock in xps_rxqs_store. Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- net/core/net-sysfs.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index 4c7bb4b93e61..7f9673c0b6d4 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -1438,10 +1438,17 @@ static ssize_t xps_rxqs_store(struct netdev_queue *queue, const char *buf, return err; } + if (!rtnl_trylock()) { + bitmap_free(mask); + return restart_syscall(); + } + cpus_read_lock(); err = __netif_set_xps_queue(dev, mask, index, true); cpus_read_unlock(); + rtnl_unlock(); + kfree(mask); return err ? : len; } -- 2.25.1

From: Florian Fainelli <f.fainelli@gmail.com> [ Upstream commit 54ddbdb024882e226055cc4c3c246592ddde2ee5 ] The driver is already allocating receive buffers of 2KiB and the Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201218173843.141046-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/net/ethernet/broadcom/bcmsysport.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 9a614c5cdfa2..0c69becc3c17 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -2507,6 +2507,7 @@ static int bcm_sysport_probe(struct platform_device *pdev) /* HW supported features, none enabled by default */ dev->hw_features |= NETIF_F_RXCSUM | NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; + dev->max_mtu = UMAC_MAX_MTU_SIZE; /* Request the WOL interrupt and advertise suspend if available */ priv->wol_irq_disabled = 1; -- 2.25.1

From: Dexuan Cui <decui@microsoft.com> db49200b1dad is backported from the mainline commit 5f1251a48c17 ("video: hyperv_fb: Fix the cache type when mapping the VRAM"), to v5.4.y and older stable branches, but unluckily db49200b1dad causes mmap() to fail for /dev/fb0 due to EINVAL: [ 5797.049560] x86/PAT: a.out:1910 map pfn expected mapping type uncached-minus for [mem 0xf8200000-0xf85cbfff], got write-back This means the v5.4.y kernel detects an incompatibility issue about the mapping type of the VRAM: db49200b1dad changes to use Write-Back when mapping the VRAM, while the mmap() syscall tries to use Uncached-minus. That’s to say, the kernel thinks Uncached-minus is incompatible with Write-Back: see drivers/video/fbdev/core/fbmem.c: fb_mmap() -> vm_iomap_memory() -> io_remap_pfn_range() -> ... -> track_pfn_remap() -> reserve_pfn_range(). Note: any v5.5 and newer kernel doesn't have the issue, because they have commit d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver") , and when the hyperv_fb driver has the deferred_io support, fb_deferred_io_init() overrides info->fbops->fb_mmap with fb_deferred_io_mmap(), which doesn’t check the mapping type incompatibility. Note: since it's VRAM here, the checking is not really necessary. Fix the regression by ioremap_wc(), which uses Write-combining. The kernel thinks it's compatible with Uncached-minus. The VRAM mappped by ioremap_wc() is slightly slower than mapped by ioremap_cache(), but is still significantly faster than by ioremap(). Change the comment accordingly. Linux VM on ARM64 Hyper-V is still not working in the latest mainline yet, and when it works in future, the ARM64 support is unlikely to be backported to v5.4 and older, so using ioremap_wc() in v5.4 and older should be ok. Note: this fix is only targeted at the stable branches: v5.4.y, v4.19.y, v4.14.y, v4.9.y and v4.4.y. Fixes: db49200b1dad ("video: hyperv_fb: Fix the cache type when mapping the VRAM") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/video/fbdev/hyperv_fb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c index 56e70f12c996..c907f96d6890 100644 --- a/drivers/video/fbdev/hyperv_fb.c +++ b/drivers/video/fbdev/hyperv_fb.c @@ -713,11 +713,9 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info) } /* - * Map the VRAM cacheable for performance. This is also required for - * VM Connect to display properly for ARM64 Linux VM, as the host also - * maps the VRAM cacheable. + * Map the VRAM cacheable for performance. */ - fb_virt = ioremap_cache(par->mem->start, screen_fb_size); + fb_virt = ioremap_wc(par->mem->start, screen_fb_size); if (!fb_virt) goto err2; -- 2.25.1

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> commit d887d6104adeb94d1b926936ea21f07367f0ff9f upstream. If an error occurs after calling 'mtk_hsdma_init()', it must be undone by a corresponding call to 'mtk_hsdma_uninit()' as already done in the remove function. Fixes: 0853c7a53eb3 ("staging: mt7621-dma: ralink: add rt2880 dma engine") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201213153513.138723-1-christophe.jaillet@wanadoo... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/staging/mt7621-dma/mtk-hsdma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/mt7621-dma/mtk-hsdma.c b/drivers/staging/mt7621-dma/mtk-hsdma.c index 5831f816c17b..f60302b71181 100644 --- a/drivers/staging/mt7621-dma/mtk-hsdma.c +++ b/drivers/staging/mt7621-dma/mtk-hsdma.c @@ -723,7 +723,7 @@ static int mtk_hsdma_probe(struct platform_device *pdev) ret = dma_async_device_register(dd); if (ret) { dev_err(&pdev->dev, "failed to register dma device\n"); - return ret; + goto err_uninit_hsdma; } ret = of_dma_controller_register(pdev->dev.of_node, @@ -739,6 +739,8 @@ static int mtk_hsdma_probe(struct platform_device *pdev) err_unregister: dma_async_device_unregister(dd); +err_uninit_hsdma: + mtk_hsdma_uninit(hsdma); return ret; } -- 2.25.1

From: Sean Young <sean@mess.org> commit 0ffc76539e6e8d28114f95ac25c167c37b5191b3 upstream. This device is supported by the IR Toy driver. Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201227134502.4548-2-sean@mess.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/class/cdc-acm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e0d8da4e3967..e847d0de6760 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1939,6 +1939,10 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x04d8, 0x0083), /* Bootloader mode */ .driver_info = IGNORE_DEVICE, }, + + { USB_DEVICE(0x04d8, 0xf58b), + .driver_info = IGNORE_DEVICE, + }, #endif /*Samsung phone in firmware update mode */ -- 2.25.1

From: Serge Semin <Sergey.Semin@baikalelectronics.ru> commit ce722da66d3e9384aa2de9d33d584ee154e5e157 upstream. In accordance with [1] the DWC_usb3 core sets the GUSB2PHYACCn.VStsDone bit when the PHY vendor control access is done and clears it when the application initiates a new transaction. The doc doesn't say anything about the GUSB2PHYACCn.VStsBsy flag serving for the same purpose. Moreover we've discovered that the VStsBsy flag can be cleared before the VStsDone bit. So using the former as a signal of the PHY control registers completion might be dangerous. Let's have the VStsDone flag utilized instead then. [1] Synopsys DesignWare Cores SuperSpeed USB 3.0 xHCI Host Controller Databook, 2.70a, December 2013, p.388 Fixes: 88bc9d194ff6 ("usb: dwc3: add ULPI interface support") Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201210085008.13264-2-Sergey.Semin@baikalelectron... Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/ulpi.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index d6968b90ee6b..55ee41283f39 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -272,6 +272,7 @@ /* Global USB2 PHY Vendor Control Register */ #define DWC3_GUSB2PHYACC_NEWREGREQ BIT(25) +#define DWC3_GUSB2PHYACC_DONE BIT(24) #define DWC3_GUSB2PHYACC_BUSY BIT(23) #define DWC3_GUSB2PHYACC_WRITE BIT(22) #define DWC3_GUSB2PHYACC_ADDR(n) (n << 16) diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c index f62b5f3c2d67..bb8271531da7 100644 --- a/drivers/usb/dwc3/ulpi.c +++ b/drivers/usb/dwc3/ulpi.c @@ -24,7 +24,7 @@ static int dwc3_ulpi_busyloop(struct dwc3 *dwc) while (count--) { reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0)); - if (!(reg & DWC3_GUSB2PHYACC_BUSY)) + if (reg & DWC3_GUSB2PHYACC_DONE) return 0; cpu_relax(); } -- 2.25.1

From: Michael Grzeschik <m.grzeschik@pengutronix.de> commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760 upstream. The commit 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") was constraining the xhci code not to allow U1/U2 sleep states if the latency to wake up from the U-states reached the service interval of an periodic endpoint. This fix was not taking into account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time will be calculated and configured differently. It checks for u1_params.mel/u2_params.mel as a limit. But the code could decide to write another MEL into the hardware. This leads to broken cases where not enough bandwidth is available for other devices: usb 1-2: can't set config #1, error -28 This patch is fixing that case by checking for timeout_ns after the wakeup time was calculated depending on the quirks. Fixes: 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201215193147.11738-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/host/xhci.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index e80f5f05bc6e..0355be4aa685 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4559,19 +4559,19 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns; + if (xhci->quirks & XHCI_INTEL_HOST) + timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); + else + timeout_ns = udev->u1_params.sel; + /* Prevent U1 if service interval is shorter than U1 exit latency */ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { - if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) { + if (xhci_service_interval_to_ns(desc) <= timeout_ns) { dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n"); return USB3_LPM_DISABLED; } } - if (xhci->quirks & XHCI_INTEL_HOST) - timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); - else - timeout_ns = udev->u1_params.sel; - /* The U1 timeout is encoded in 1us intervals. * Don't return a timeout of zero, because that's USB3_LPM_DISABLED. */ @@ -4623,19 +4623,19 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns; + if (xhci->quirks & XHCI_INTEL_HOST) + timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); + else + timeout_ns = udev->u2_params.sel; + /* Prevent U2 if service interval is shorter than U2 exit latency */ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { - if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) { + if (xhci_service_interval_to_ns(desc) <= timeout_ns) { dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n"); return USB3_LPM_DISABLED; } } - if (xhci->quirks & XHCI_INTEL_HOST) - timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); - else - timeout_ns = udev->u2_params.sel; - /* The U2 timeout is encoded in 256us intervals */ timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000); /* If the necessary timeout value is bigger than what we can set in the -- 2.25.1

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com> commit 96ebc9c871d8a28fb22aa758dd9188a4732df482 upstream. Here's another variant PNY Pro Elite USB 3.1 Gen 2 portable SSD that hangs and doesn't respond to ATA_1x pass-through commands. If it doesn't support these commands, it should respond properly to the host. Add it to the unusual uas list to be able to move forward with other operations. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/2edc7af892d0913bf06f5b35e49ec463f03d5ed8.160981941... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/storage/unusual_uas.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 749c69be091c..cb7b15ecb7ab 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -90,6 +90,13 @@ UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BROKEN_FUA), +/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */ +UNUSUAL_DEV(0x154b, 0xf00b, 0x0000, 0x9999, + "PNY", + "Pro Elite SSD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */ UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999, "PNY", -- 2.25.1

From: Daniel Palmer <daniel@0x0f.com> commit 0e2d6795e8dbe91c2f5473564c6b25d11df3778b upstream. Add a device-id entry for the LongSung M5710 module. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2df3 ProdID=9d03 Rev= 1.00 S: Manufacturer=Marvell S: Product=Mobile Composite Device Bus S: SerialNumber=<snip> C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniel Palmer <daniel@0x0f.com> https://lore.kernel.org/r/20201227031716.1343300-1-daniel@0x0f.com [ johan: drop id defines, only bind to vendor class ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6fd6012ad7b3..a8e728b790a2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2057,6 +2057,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ .driver_info = RSVD(6) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ -- 2.25.1

From: Johan Hovold <johan@kernel.org> commit 372c93131998c0622304bed118322d2a04489e63 upstream. Make sure to always cancel the control URB in write() so that it can be reused after a timeout or spurious CMD_ACK. Currently any further write requests after a timeout would fail after triggering a WARN() in usb_submit_urb() when attempting to submit the already active URB. Reported-by: syzbot+e87ebe0f7913f71f2ea5@syzkaller.appspotmail.com Fixes: 6bc235a2e24a ("USB: add driver for Meywa-Denki & Kayac YUREX") Cc: stable <stable@vger.kernel.org> # 2.6.37 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/misc/yurex.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 785080f79073..08b72bb22b7e 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -497,6 +497,9 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, timeout = schedule_timeout(YUREX_WRITE_TIMEOUT); finish_wait(&dev->waitq, &wait); + /* make sure URB is idle after timeout or (spurious) CMD_ACK */ + usb_kill_urb(dev->cntl_urb); + mutex_unlock(&dev->io_mutex); if (retval < 0) { -- 2.25.1

From: Takashi Iwai <tiwai@suse.de> commit c06ccf3ebb7503706ea49fd248e709287ef385a3 upstream. The calculation of in_cables and out_cables bitmaps are done with the bit shift by the value from the descriptor, which is an arbitrary value, and can lead to UBSAN shift-out-of-bounds warnings. Fix it by filtering the bad descriptor values with the check of the upper bound 0x10 (the cable bitmaps are 16 bits). Reported-by: syzbot+92e45ae45543f89e8c88@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201223174557.10249-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- sound/usb/midi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/usb/midi.c b/sound/usb/midi.c index 137e1e8718d6..26548f760bc1 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -1890,6 +1890,8 @@ static int snd_usbmidi_get_ms_info(struct snd_usb_midi *umidi, ms_ep = find_usb_ms_endpoint_descriptor(hostep); if (!ms_ep) continue; + if (ms_ep->bNumEmbMIDIJack > 0x10) + continue; if (usb_endpoint_dir_out(ep)) { if (endpoints[epidx].out_ep) { if (++epidx >= MIDI_MAX_ENDPOINTS) { @@ -2142,6 +2144,8 @@ static int snd_usbmidi_detect_roland(struct snd_usb_midi *umidi, cs_desc[1] == USB_DT_CS_INTERFACE && cs_desc[2] == 0xf1 && cs_desc[3] == 0x02) { + if (cs_desc[4] > 0x10 || cs_desc[5] > 0x10) + continue; endpoint->in_cables = (1 << cs_desc[4]) - 1; endpoint->out_cables = (1 << cs_desc[5]) - 1; return snd_usbmidi_detect_endpoints(umidi, endpoint, 1); -- 2.25.1

From: Jerome Brunet <jbrunet@baylibre.com> commit 9389044f27081d6ec77730c36d5bf9a1288bcda2 upstream. With commit 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth") wMaxPacketSize is computed dynamically but the value is never reset. Because of this, the actual maximum packet size can only decrease each time the audio gadget is instantiated. Reset the endpoint maximum packet size and mark wMaxPacketSize as dynamic to solve the problem. Fixes: 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201221173531.215169-2-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/gadget/function/f_uac2.c | 69 ++++++++++++++++++++++------ 1 file changed, 55 insertions(+), 14 deletions(-) diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index d582921f7257..425981ab7a4d 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -275,7 +275,7 @@ static struct usb_endpoint_descriptor fs_epout_desc = { .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, - .wMaxPacketSize = cpu_to_le16(1023), + /* .wMaxPacketSize = DYNAMIC */ .bInterval = 1, }; @@ -284,7 +284,7 @@ static struct usb_endpoint_descriptor hs_epout_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, - .wMaxPacketSize = cpu_to_le16(1024), + /* .wMaxPacketSize = DYNAMIC */ .bInterval = 4, }; @@ -352,7 +352,7 @@ static struct usb_endpoint_descriptor fs_epin_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, - .wMaxPacketSize = cpu_to_le16(1023), + /* .wMaxPacketSize = DYNAMIC */ .bInterval = 1, }; @@ -361,7 +361,7 @@ static struct usb_endpoint_descriptor hs_epin_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, - .wMaxPacketSize = cpu_to_le16(1024), + /* .wMaxPacketSize = DYNAMIC */ .bInterval = 4, }; @@ -448,12 +448,28 @@ struct cntrl_range_lay3 { __le32 dRES; } __packed; -static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, +static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, struct usb_endpoint_descriptor *ep_desc, - unsigned int factor, bool is_playback) + enum usb_device_speed speed, bool is_playback) { int chmask, srate, ssize; - u16 max_packet_size; + u16 max_size_bw, max_size_ep; + unsigned int factor; + + switch (speed) { + case USB_SPEED_FULL: + max_size_ep = 1023; + factor = 1000; + break; + + case USB_SPEED_HIGH: + max_size_ep = 1024; + factor = 8000; + break; + + default: + return -EINVAL; + } if (is_playback) { chmask = uac2_opts->p_chmask; @@ -465,10 +481,12 @@ static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, ssize = uac2_opts->c_ssize; } - max_packet_size = num_channels(chmask) * ssize * + max_size_bw = num_channels(chmask) * ssize * DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1))); - ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_packet_size, - le16_to_cpu(ep_desc->wMaxPacketSize))); + ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw, + max_size_ep)); + + return 0; } static int @@ -551,10 +569,33 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) uac2->as_in_alt = 0; /* Calculate wMaxPacketSize according to audio bandwidth */ - set_ep_max_packet_size(uac2_opts, &fs_epin_desc, 1000, true); - set_ep_max_packet_size(uac2_opts, &fs_epout_desc, 1000, false); - set_ep_max_packet_size(uac2_opts, &hs_epin_desc, 8000, true); - set_ep_max_packet_size(uac2_opts, &hs_epout_desc, 8000, false); + ret = set_ep_max_packet_size(uac2_opts, &fs_epin_desc, USB_SPEED_FULL, + true); + if (ret < 0) { + dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); + return ret; + } + + ret = set_ep_max_packet_size(uac2_opts, &fs_epout_desc, USB_SPEED_FULL, + false); + if (ret < 0) { + dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); + return ret; + } + + ret = set_ep_max_packet_size(uac2_opts, &hs_epin_desc, USB_SPEED_HIGH, + true); + if (ret < 0) { + dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); + return ret; + } + + ret = set_ep_max_packet_size(uac2_opts, &hs_epout_desc, USB_SPEED_HIGH, + false); + if (ret < 0) { + dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); + return ret; + } agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc); if (!agdev->out_ep) { -- 2.25.1

From: Manish Narani <manish.narani@xilinx.com> commit 0a88fa221ce911c331bf700d2214c5b2f77414d3 upstream. Fix the MTU size issue with RX packet size as the host sends the packet with extra bytes containing ethernet header. This causes failure when user sets the MTU size to the maximum i.e. 15412. In this case the ethernet packet received will be of length 15412 plus the ethernet header length. This patch fixes the issue where there is a check that RX packet length must not be more than max packet length. Fixes: bba787a860fa ("usb: gadget: ether: Allow jumbo frames") Signed-off-by: Manish Narani <manish.narani@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1605597215-122027-1-git-send-email-manish.narani@x... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/gadget/function/u_ether.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 39ebc1b03698..156651df6b4d 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -45,9 +45,10 @@ #define UETH__VERSION "29-May-2008" /* Experiments show that both Linux and Windows hosts allow up to 16k - * frame sizes. Set the max size to 15k+52 to prevent allocating 32k + * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k * blocks and still have efficient handling. */ -#define GETHER_MAX_ETH_FRAME_LEN 15412 +#define GETHER_MAX_MTU_SIZE 15412 +#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN) struct eth_dev { /* lock is held while accessing port_usb @@ -786,7 +787,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, /* MTU range: 14 - 15412 */ net->min_mtu = ETH_HLEN; - net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; dev->gadget = g; SET_NETDEV_DEV(net, &g->dev); @@ -848,7 +849,7 @@ struct net_device *gether_setup_name_default(const char *netname) /* MTU range: 14 - 15412 */ net->min_mtu = ETH_HLEN; - net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; return net; } -- 2.25.1

From: Sriharsha Allenki <sallenki@codeaurora.org> commit 5cc35c224a80aa5a5a539510ef049faf0d6ed181 upstream. There is a spinlock lockup as part of composite_disconnect when it tries to acquire cdev->lock as part of usb_gadget_deactivate. This is because the usb_gadget_deactivate is called from usb_function_deactivate with the same spinlock held. This would result in the below call stack and leads to stall. rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: 3-...0: (1 GPs behind) idle=162/1/0x4000000000000000 softirq=10819/10819 fqs=2356 (detected by 2, t=5252 jiffies, g=20129, q=3770) Task dump for CPU 3: task:uvc-gadget_wlhe state:R running task stack: 0 pid: 674 ppid: 636 flags:0x00000202 Call trace: __switch_to+0xc0/0x170 _raw_spin_lock_irqsave+0x84/0xb0 composite_disconnect+0x28/0x78 configfs_composite_disconnect+0x68/0x70 usb_gadget_disconnect+0x10c/0x128 usb_gadget_deactivate+0xd4/0x108 usb_function_deactivate+0x6c/0x80 uvc_function_disconnect+0x20/0x58 uvc_v4l2_release+0x30/0x88 v4l2_release+0xbc/0xf0 __fput+0x7c/0x230 ____fput+0x14/0x20 task_work_run+0x88/0x140 do_notify_resume+0x240/0x6f0 work_pending+0x8/0x200 Fix this by doing an unlock on cdev->lock before the usb_gadget_deactivate call from usb_function_deactivate. The same lockup can happen in the usb_gadget_activate path. Fix that path as well. Reported-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/linux-usb/20201102094936.GA29581@b29397-desktop/ Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201202130220.24926-1-sallenki@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/gadget/composite.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 40b3ed93596a..4cfcc73f3979 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -392,8 +392,11 @@ int usb_function_deactivate(struct usb_function *function) spin_lock_irqsave(&cdev->lock, flags); - if (cdev->deactivations == 0) + if (cdev->deactivations == 0) { + spin_unlock_irqrestore(&cdev->lock, flags); status = usb_gadget_deactivate(cdev->gadget); + spin_lock_irqsave(&cdev->lock, flags); + } if (status == 0) cdev->deactivations++; @@ -424,8 +427,11 @@ int usb_function_activate(struct usb_function *function) status = -EINVAL; else { cdev->deactivations--; - if (cdev->deactivations == 0) + if (cdev->deactivations == 0) { + spin_unlock_irqrestore(&cdev->lock, flags); status = usb_gadget_activate(cdev->gadget); + spin_lock_irqsave(&cdev->lock, flags); + } } spin_unlock_irqrestore(&cdev->lock, flags); -- 2.25.1

From: Eddie Hung <eddie.hung@mediatek.com> commit 64e6bbfff52db4bf6785fab9cffab850b2de6870 upstream. There is a use-after-free issue, if access udc_name in function gadget_dev_desc_UDC_store after another context free udc_name in function unregister_gadget. Context 1: gadget_dev_desc_UDC_store()->unregister_gadget()-> free udc_name->set udc_name to NULL Context 2: gadget_dev_desc_UDC_show()-> access udc_name Call trace: dump_backtrace+0x0/0x340 show_stack+0x14/0x1c dump_stack+0xe4/0x134 print_address_description+0x78/0x478 __kasan_report+0x270/0x2ec kasan_report+0x10/0x18 __asan_report_load1_noabort+0x18/0x20 string+0xf4/0x138 vsnprintf+0x428/0x14d0 sprintf+0xe4/0x12c gadget_dev_desc_UDC_show+0x54/0x64 configfs_read_file+0x210/0x3a0 __vfs_read+0xf0/0x49c vfs_read+0x130/0x2b4 SyS_read+0x114/0x208 el0_svc_naked+0x34/0x38 Add mutex_lock to protect this kind of scenario. Signed-off-by: Eddie Hung <eddie.hung@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1609239215-21819-1-git-send-email-macpaul.lin@medi... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/gadget/configfs.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 060c88434653..5b8b2ca4376c 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -233,9 +233,16 @@ static ssize_t gadget_dev_desc_bcdUSB_store(struct config_item *item, static ssize_t gadget_dev_desc_UDC_show(struct config_item *item, char *page) { - char *udc_name = to_gadget_info(item)->composite.gadget_driver.udc_name; + struct gadget_info *gi = to_gadget_info(item); + char *udc_name; + int ret; + + mutex_lock(&gi->lock); + udc_name = gi->composite.gadget_driver.udc_name; + ret = sprintf(page, "%s\n", udc_name ?: ""); + mutex_unlock(&gi->lock); - return sprintf(page, "%s\n", udc_name ?: ""); + return ret; } static int unregister_gadget(struct gadget_info *gi) -- 2.25.1

From: Dan Williams <dan.j.williams@intel.com> commit d1c5246e08eb64991001d97a3bd119c93edbc79a upstream. Commit 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") introduced a new location where a pmd was released, but neglected to run the pmd page destructor. In fact, this happened previously for a different pmd release path and was fixed by commit: c283610e44ec ("x86, mm: do not leak page->ptl for pmd page tables"). This issue was hidden until recently because the failure mode is silent, but commit: b2b29d6d0119 ("mm: account PMD tables like PTE tables") turns the failure mode into this signature: BUG: Bad page state in process lt-pmem-ns pfn:15943d page:000000007262ed7b refcount:0 mapcount:-1024 mapping:0000000000000000 index:0x0 pfn:0x15943d flags: 0xaffff800000000() raw: 00affff800000000 dead000000000100 0000000000000000 0000000000000000 raw: 0000000000000000 ffff913a029bcc08 00000000fffffbff 0000000000000000 page dumped because: nonzero mapcount [..] dump_stack+0x8b/0xb0 bad_page.cold+0x63/0x94 free_pcp_prepare+0x224/0x270 free_unref_page+0x18/0xd0 pud_free_pmd_page+0x146/0x160 ioremap_pud_range+0xe3/0x350 ioremap_page_range+0x108/0x160 __ioremap_caller.constprop.0+0x174/0x2b0 ? memremap+0x7a/0x110 memremap+0x7a/0x110 devm_memremap+0x53/0xa0 pmem_attach_disk+0x4ed/0x530 [nd_pmem] ? __devm_release_region+0x52/0x80 nvdimm_bus_probe+0x85/0x210 [libnvdimm] Given this is a repeat occurrence it seemed prudent to look for other places where this destructor might be missing and whether a better helper is needed. try_to_free_pmd_page() looks like a candidate, but testing with setting up and tearing down pmd mappings via the dax unit tests is thus far not triggering the failure. As for a better helper pmd_free() is close, but it is a messy fit due to requiring an @mm arg. Also, ___pmd_free_tlb() wants to call paravirt_tlb_remove_table() instead of free_page(), so open-coded pgtable_pmd_page_dtor() seems the best way forward for now. Debugged together with Matthew Wilcox <willy@infradead.org>. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Yi Zhang <yi.zhang@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/160697689204.605323.17629854984697045602.stgit@dwi... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/mm/pgtable.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 5b97717b389b..a10dfb9043e9 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -846,6 +846,8 @@ int pud_free_pmd_page(pud_t *pud, unsigned long addr) } free_page((unsigned long)pmd_sv); + + pgtable_pmd_page_dtor(virt_to_page(pmd)); free_page((unsigned long)pmd); return 1; -- 2.25.1

From: bo liu <bo.liu@senarytech.com> commit 744a11abc56405c5a106e63da30a941b6d27f737 upstream. The current kernel does not support the cx11970 codec chip. Add a codec configuration item to kernel. [ Minor coding style fix by tiwai ] Signed-off-by: bo liu <bo.liu@senarytech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 78bb96263bc2..7d471ecc1ca0 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1088,6 +1088,7 @@ static int patch_conexant_auto(struct hda_codec *codec) static const struct hda_device_id snd_hda_id_conexant[] = { HDA_CODEC_ENTRY(0x14f11f86, "CX8070", patch_conexant_auto), HDA_CODEC_ENTRY(0x14f12008, "CX8200", patch_conexant_auto), + HDA_CODEC_ENTRY(0x14f120d0, "CX11970", patch_conexant_auto), HDA_CODEC_ENTRY(0x14f15045, "CX20549 (Venice)", patch_conexant_auto), HDA_CODEC_ENTRY(0x14f15047, "CX20551 (Waikiki)", patch_conexant_auto), HDA_CODEC_ENTRY(0x14f15051, "CX20561 (Hermosa)", patch_conexant_auto), -- 2.25.1

From: Filipe Manana <fdmanana@suse.com> commit 0b3f407e6728d990ae1630a02c7b952c21c288d3 upstream. When doing an incremental send, if we have a new inode that happens to have the same number that an old directory inode had in the base snapshot and that old directory has a pending rmdir operation, we end up computing a wrong path for the new inode, causing the receiver to fail. Example reproducer: $ cat test-send-rmdir.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT mkdir $MNT/dir touch $MNT/dir/file1 touch $MNT/dir/file2 touch $MNT/dir/file3 # Filesystem looks like: # # . (ino 256) # |----- dir/ (ino 257) # |----- file1 (ino 258) # |----- file2 (ino 259) # |----- file3 (ino 260) # btrfs subvolume snapshot -r $MNT $MNT/snap1 btrfs send -f /tmp/snap1.send $MNT/snap1 # Now remove our directory and all its files. rm -fr $MNT/dir # Unmount the filesystem and mount it again. This is to ensure that # the next inode that is created ends up with the same inode number # that our directory "dir" had, 257, which is the first free "objectid" # available after mounting again the filesystem. umount $MNT mount $DEV $MNT # Now create a new file (it could be a directory as well). touch $MNT/newfile # Filesystem now looks like: # # . (ino 256) # |----- newfile (ino 257) # btrfs subvolume snapshot -r $MNT $MNT/snap2 btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2 # Now unmount the filesystem, create a new one, mount it and try to apply # both send streams to recreate both snapshots. umount $DEV mkfs.btrfs -f $DEV >/dev/null mount $DEV $MNT btrfs receive -f /tmp/snap1.send $MNT btrfs receive -f /tmp/snap2.send $MNT umount $MNT When running the test, the receive operation for the incremental stream fails: $ ./test-send-rmdir.sh Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1' At subvol /mnt/sdi/snap1 Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2' At subvol /mnt/sdi/snap2 At subvol snap1 At snapshot snap2 ERROR: chown o257-9-0 failed: No such file or directory So fix this by tracking directories that have a pending rmdir by inode number and generation number, instead of only inode number. A test case for fstests follows soon. Reported-by: Massimo B. <massimo.b@gmx.net> Tested-by: Massimo B. <massimo.b@gmx.net> Link: https://lore.kernel.org/linux-btrfs/6ae34776e85912960a253a8327068a892998e685... CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- fs/btrfs/send.c | 49 +++++++++++++++++++++++++++++++------------------ 1 file changed, 31 insertions(+), 18 deletions(-) diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index 29dbdac1c93a..462d795c9fc1 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -238,6 +238,7 @@ struct waiting_dir_move { * after this directory is moved, we can try to rmdir the ino rmdir_ino. */ u64 rmdir_ino; + u64 rmdir_gen; bool orphanized; }; @@ -308,7 +309,7 @@ static int is_waiting_for_move(struct send_ctx *sctx, u64 ino); static struct waiting_dir_move * get_waiting_dir_move(struct send_ctx *sctx, u64 ino); -static int is_waiting_for_rm(struct send_ctx *sctx, u64 dir_ino); +static int is_waiting_for_rm(struct send_ctx *sctx, u64 dir_ino, u64 gen); static int need_send_hole(struct send_ctx *sctx) { @@ -2304,7 +2305,7 @@ static int get_cur_path(struct send_ctx *sctx, u64 ino, u64 gen, fs_path_reset(name); - if (is_waiting_for_rm(sctx, ino)) { + if (is_waiting_for_rm(sctx, ino, gen)) { ret = gen_unique_name(sctx, ino, gen, name); if (ret < 0) goto out; @@ -2863,8 +2864,8 @@ static int orphanize_inode(struct send_ctx *sctx, u64 ino, u64 gen, return ret; } -static struct orphan_dir_info * -add_orphan_dir_info(struct send_ctx *sctx, u64 dir_ino) +static struct orphan_dir_info *add_orphan_dir_info(struct send_ctx *sctx, + u64 dir_ino, u64 dir_gen) { struct rb_node **p = &sctx->orphan_dirs.rb_node; struct rb_node *parent = NULL; @@ -2873,20 +2874,23 @@ add_orphan_dir_info(struct send_ctx *sctx, u64 dir_ino) while (*p) { parent = *p; entry = rb_entry(parent, struct orphan_dir_info, node); - if (dir_ino < entry->ino) { + if (dir_ino < entry->ino) p = &(*p)->rb_left; - } else if (dir_ino > entry->ino) { + else if (dir_ino > entry->ino) p = &(*p)->rb_right; - } else { + else if (dir_gen < entry->gen) + p = &(*p)->rb_left; + else if (dir_gen > entry->gen) + p = &(*p)->rb_right; + else return entry; - } } odi = kmalloc(sizeof(*odi), GFP_KERNEL); if (!odi) return ERR_PTR(-ENOMEM); odi->ino = dir_ino; - odi->gen = 0; + odi->gen = dir_gen; odi->last_dir_index_offset = 0; rb_link_node(&odi->node, parent, p); @@ -2894,8 +2898,8 @@ add_orphan_dir_info(struct send_ctx *sctx, u64 dir_ino) return odi; } -static struct orphan_dir_info * -get_orphan_dir_info(struct send_ctx *sctx, u64 dir_ino) +static struct orphan_dir_info *get_orphan_dir_info(struct send_ctx *sctx, + u64 dir_ino, u64 gen) { struct rb_node *n = sctx->orphan_dirs.rb_node; struct orphan_dir_info *entry; @@ -2906,15 +2910,19 @@ get_orphan_dir_info(struct send_ctx *sctx, u64 dir_ino) n = n->rb_left; else if (dir_ino > entry->ino) n = n->rb_right; + else if (gen < entry->gen) + n = n->rb_left; + else if (gen > entry->gen) + n = n->rb_right; else return entry; } return NULL; } -static int is_waiting_for_rm(struct send_ctx *sctx, u64 dir_ino) +static int is_waiting_for_rm(struct send_ctx *sctx, u64 dir_ino, u64 gen) { - struct orphan_dir_info *odi = get_orphan_dir_info(sctx, dir_ino); + struct orphan_dir_info *odi = get_orphan_dir_info(sctx, dir_ino, gen); return odi != NULL; } @@ -2959,7 +2967,7 @@ static int can_rmdir(struct send_ctx *sctx, u64 dir, u64 dir_gen, key.type = BTRFS_DIR_INDEX_KEY; key.offset = 0; - odi = get_orphan_dir_info(sctx, dir); + odi = get_orphan_dir_info(sctx, dir, dir_gen); if (odi) key.offset = odi->last_dir_index_offset; @@ -2990,7 +2998,7 @@ static int can_rmdir(struct send_ctx *sctx, u64 dir, u64 dir_gen, dm = get_waiting_dir_move(sctx, loc.objectid); if (dm) { - odi = add_orphan_dir_info(sctx, dir); + odi = add_orphan_dir_info(sctx, dir, dir_gen); if (IS_ERR(odi)) { ret = PTR_ERR(odi); goto out; @@ -2998,12 +3006,13 @@ static int can_rmdir(struct send_ctx *sctx, u64 dir, u64 dir_gen, odi->gen = dir_gen; odi->last_dir_index_offset = found_key.offset; dm->rmdir_ino = dir; + dm->rmdir_gen = dir_gen; ret = 0; goto out; } if (loc.objectid > send_progress) { - odi = add_orphan_dir_info(sctx, dir); + odi = add_orphan_dir_info(sctx, dir, dir_gen); if (IS_ERR(odi)) { ret = PTR_ERR(odi); goto out; @@ -3043,6 +3052,7 @@ static int add_waiting_dir_move(struct send_ctx *sctx, u64 ino, bool orphanized) return -ENOMEM; dm->ino = ino; dm->rmdir_ino = 0; + dm->rmdir_gen = 0; dm->orphanized = orphanized; while (*p) { @@ -3188,7 +3198,7 @@ static int path_loop(struct send_ctx *sctx, struct fs_path *name, while (ino != BTRFS_FIRST_FREE_OBJECTID) { fs_path_reset(name); - if (is_waiting_for_rm(sctx, ino)) + if (is_waiting_for_rm(sctx, ino, gen)) break; if (is_waiting_for_move(sctx, ino)) { if (*ancestor_ino == 0) @@ -3228,6 +3238,7 @@ static int apply_dir_move(struct send_ctx *sctx, struct pending_dir_move *pm) u64 parent_ino, parent_gen; struct waiting_dir_move *dm = NULL; u64 rmdir_ino = 0; + u64 rmdir_gen; u64 ancestor; bool is_orphan; int ret; @@ -3242,6 +3253,7 @@ static int apply_dir_move(struct send_ctx *sctx, struct pending_dir_move *pm) dm = get_waiting_dir_move(sctx, pm->ino); ASSERT(dm); rmdir_ino = dm->rmdir_ino; + rmdir_gen = dm->rmdir_gen; is_orphan = dm->orphanized; free_waiting_dir_move(sctx, dm); @@ -3278,6 +3290,7 @@ static int apply_dir_move(struct send_ctx *sctx, struct pending_dir_move *pm) dm = get_waiting_dir_move(sctx, pm->ino); ASSERT(dm); dm->rmdir_ino = rmdir_ino; + dm->rmdir_gen = rmdir_gen; } goto out; } @@ -3296,7 +3309,7 @@ static int apply_dir_move(struct send_ctx *sctx, struct pending_dir_move *pm) struct orphan_dir_info *odi; u64 gen; - odi = get_orphan_dir_info(sctx, rmdir_ino); + odi = get_orphan_dir_info(sctx, rmdir_ino, rmdir_gen); if (!odi) { /* already deleted */ goto finish; -- 2.25.1

From: Roger Pau Monne <roger.pau@citrix.com> commit 72813bfbf0276a97c82af038efb5f02dcdd9e310 upstream. This involves initializing the boot params EFI related fields and the efi global variable. Without this fix a PVH dom0 doesn't detect when booted from EFI, and thus doesn't support accessing any of the EFI related data. Reported-by: PGNet Dev <pgnet.dev@gmail.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Jinoh Kang <jinoh.kang.kr@gmail.com> Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/xen/efi.c | 12 ++++++------ arch/x86/xen/enlighten_pv.c | 2 +- arch/x86/xen/enlighten_pvh.c | 4 ++++ arch/x86/xen/xen-ops.h | 4 ++-- 4 files changed, 13 insertions(+), 9 deletions(-) diff --git a/arch/x86/xen/efi.c b/arch/x86/xen/efi.c index 66bcdeeee639..90d2e4ce7064 100644 --- a/arch/x86/xen/efi.c +++ b/arch/x86/xen/efi.c @@ -172,7 +172,7 @@ static enum efi_secureboot_mode xen_efi_get_secureboot(void) return efi_secureboot_mode_unknown; } -void __init xen_efi_init(void) +void __init xen_efi_init(struct boot_params *boot_params) { efi_system_table_t *efi_systab_xen; @@ -181,12 +181,12 @@ void __init xen_efi_init(void) if (efi_systab_xen == NULL) return; - strncpy((char *)&boot_params.efi_info.efi_loader_signature, "Xen", - sizeof(boot_params.efi_info.efi_loader_signature)); - boot_params.efi_info.efi_systab = (__u32)__pa(efi_systab_xen); - boot_params.efi_info.efi_systab_hi = (__u32)(__pa(efi_systab_xen) >> 32); + strncpy((char *)&boot_params->efi_info.efi_loader_signature, "Xen", + sizeof(boot_params->efi_info.efi_loader_signature)); + boot_params->efi_info.efi_systab = (__u32)__pa(efi_systab_xen); + boot_params->efi_info.efi_systab_hi = (__u32)(__pa(efi_systab_xen) >> 32); - boot_params.secure_boot = xen_efi_get_secureboot(); + boot_params->secure_boot = xen_efi_get_secureboot(); set_bit(EFI_BOOT, &efi.flags); set_bit(EFI_PARAVIRT, &efi.flags); diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c index a05a25bdd567..4f4bab53f08f 100644 --- a/arch/x86/xen/enlighten_pv.c +++ b/arch/x86/xen/enlighten_pv.c @@ -1410,7 +1410,7 @@ asmlinkage __visible void __init xen_start_kernel(void) /* We need this for printk timestamps */ xen_setup_runstate_info(0); - xen_efi_init(); + xen_efi_init(&boot_params); /* Start the world */ #ifdef CONFIG_X86_32 diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c index dab07827d25e..f04d22bcf08d 100644 --- a/arch/x86/xen/enlighten_pvh.c +++ b/arch/x86/xen/enlighten_pvh.c @@ -14,6 +14,8 @@ #include <xen/interface/memory.h> #include <xen/interface/hvm/start_info.h> +#include "xen-ops.h" + /* * PVH variables. * @@ -79,6 +81,8 @@ static void __init init_pvh_bootparams(void) pvh_bootparams.hdr.type_of_loader = (9 << 4) | 0; /* Xen loader */ x86_init.acpi.get_root_pointer = pvh_get_root_pointer; + + xen_efi_init(&pvh_bootparams); } /* diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 0e60bd918695..2f111f47ba98 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -122,9 +122,9 @@ static inline void __init xen_init_vga(const struct dom0_vga_console_info *info, void __init xen_init_apic(void); #ifdef CONFIG_XEN_EFI -extern void xen_efi_init(void); +extern void xen_efi_init(struct boot_params *boot_params); #else -static inline void __init xen_efi_init(void) +static inline void __init xen_efi_init(struct boot_params *boot_params) { } #endif -- 2.25.1

From: Vasily Averin <vvs@virtuozzo.com> commit 5c8193f568ae16f3242abad6518dc2ca6c8eef86 upstream. htable_bits() can call jhash_size(32) and trigger shift-out-of-bounds UBSAN: shift-out-of-bounds in net/netfilter/ipset/ip_set_hash_gen.h:151:6 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 8498 Comm: syz-executor519 Not tainted 5.10.0-rc7-next-20201208-syzkaller #0 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395 htable_bits net/netfilter/ipset/ip_set_hash_gen.h:151 [inline] hash_mac_create.cold+0x58/0x9b net/netfilter/ipset/ip_set_hash_gen.h:1524 ip_set_create+0x610/0x1380 net/netfilter/ipset/ip_set_core.c:1115 nfnetlink_rcv_msg+0xecc/0x1180 net/netfilter/nfnetlink.c:252 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:600 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2345 ___sys_sendmsg+0xf3/0x170 net/socket.c:2399 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2432 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This patch replaces htable_bits() by simple fls(hashsize - 1) call: it alone returns valid nbits both for round and non-round hashsizes. It is normal to set any nbits here because it is validated inside following htable_size() call which returns 0 for nbits>31. Fixes: 1feab10d7e6d("netfilter: ipset: Unified hash type generation") Reported-by: syzbot+d66bfadebca46cf61a2b@syzkaller.appspotmail.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- net/netfilter/ipset/ip_set_hash_gen.h | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h index ddfe06d7530b..154b40f2f2a8 100644 --- a/net/netfilter/ipset/ip_set_hash_gen.h +++ b/net/netfilter/ipset/ip_set_hash_gen.h @@ -115,20 +115,6 @@ htable_size(u8 hbits) return hsize * sizeof(struct hbucket *) + sizeof(struct htable); } -/* Compute htable_bits from the user input parameter hashsize */ -static u8 -htable_bits(u32 hashsize) -{ - /* Assume that hashsize == 2^htable_bits */ - u8 bits = fls(hashsize - 1); - - if (jhash_size(bits) != hashsize) - /* Round up to the first 2^n value */ - bits = fls(hashsize); - - return bits; -} - #ifdef IP_SET_HASH_WITH_NETS #if IPSET_NET_COUNT > 1 #define __CIDR(cidr, i) (cidr[i]) @@ -1287,7 +1273,11 @@ IPSET_TOKEN(HTYPE, _create)(struct net *net, struct ip_set *set, if (!h) return -ENOMEM; - hbits = htable_bits(hashsize); + /* Compute htable_bits from the user input parameter hashsize. + * Assume that hashsize == 2^htable_bits, + * otherwise round up to the first 2^n value. + */ + hbits = fls(hashsize - 1); hsize = htable_size(hbits); if (hsize == 0) { kfree(h); -- 2.25.1

From: Ying-Tsun Huang <ying-tsun.huang@amd.com> commit cb7f4a8b1fb426a175d1708f05581939c61329d4 upstream. In mtrr_type_lookup(), if the input memory address region is not in the MTRR, over 4GB, and not over the top of memory, a write-back attribute is returned. These condition checks are for ensuring the input memory address region is actually mapped to the physical memory. However, if the end address is just aligned with the top of memory, the condition check treats the address is over the top of memory, and write-back attribute is not returned. And this hits in a real use case with NVDIMM: the nd_pmem module tries to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes very low since it is aligned with the top of memory and its memory type is uncached-minus. Move the input end address change to inclusive up into mtrr_type_lookup(), before checking for the top of memory in either mtrr_type_lookup_{variable,fixed}() helpers. [ bp: Massage commit message. ] Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()") Signed-off-by: Ying-Tsun Huang <ying-tsun.huang@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- arch/x86/kernel/cpu/mtrr/generic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index e12ee86906c6..9436f3452049 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -166,9 +166,6 @@ static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end, *repeat = 0; *uniform = 1; - /* Make end inclusive instead of exclusive */ - end--; - prev_match = MTRR_TYPE_INVALID; for (i = 0; i < num_var_ranges; ++i) { unsigned short start_state, end_state, inclusive; @@ -260,6 +257,9 @@ u8 mtrr_type_lookup(u64 start, u64 end, u8 *uniform) int repeat; u64 partial_end; + /* Make end inclusive instead of exclusive */ + end--; + if (!mtrr_state_set) return MTRR_TYPE_INVALID; -- 2.25.1

From: David Disseldorp <ddiss@suse.de> commit 2896c93811e39d63a4d9b63ccf12a8fbc226e5e4 upstream. When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/target/target_core_xcopy.c | 119 +++++++++++++++++------------ drivers/target/target_core_xcopy.h | 1 + 2 files changed, 71 insertions(+), 49 deletions(-) diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 7cdb5d7f6538..1709b8a99bd7 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -55,60 +55,83 @@ static int target_xcopy_gen_naa_ieee(struct se_device *dev, unsigned char *buf) return 0; } -struct xcopy_dev_search_info { - const unsigned char *dev_wwn; - struct se_device *found_dev; -}; - +/** + * target_xcopy_locate_se_dev_e4_iter - compare XCOPY NAA device identifiers + * + * @se_dev: device being considered for match + * @dev_wwn: XCOPY requested NAA dev_wwn + * @return: 1 on match, 0 on no-match + */ static int target_xcopy_locate_se_dev_e4_iter(struct se_device *se_dev, - void *data) + const unsigned char *dev_wwn) { - struct xcopy_dev_search_info *info = data; unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN]; int rc; - if (!se_dev->dev_attrib.emulate_3pc) + if (!se_dev->dev_attrib.emulate_3pc) { + pr_debug("XCOPY: emulate_3pc disabled on se_dev %p\n", se_dev); return 0; + } memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN); target_xcopy_gen_naa_ieee(se_dev, &tmp_dev_wwn[0]); - rc = memcmp(&tmp_dev_wwn[0], info->dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN); - if (rc != 0) - return 0; - - info->found_dev = se_dev; - pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev); - - rc = target_depend_item(&se_dev->dev_group.cg_item); + rc = memcmp(&tmp_dev_wwn[0], dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN); if (rc != 0) { - pr_err("configfs_depend_item attempt failed: %d for se_dev: %p\n", - rc, se_dev); - return rc; + pr_debug("XCOPY: skip non-matching: %*ph\n", + XCOPY_NAA_IEEE_REGEX_LEN, tmp_dev_wwn); + return 0; } + pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev); - pr_debug("Called configfs_depend_item for se_dev: %p se_dev->se_dev_group: %p\n", - se_dev, &se_dev->dev_group); return 1; } -static int target_xcopy_locate_se_dev_e4(const unsigned char *dev_wwn, - struct se_device **found_dev) +static int target_xcopy_locate_se_dev_e4(struct se_session *sess, + const unsigned char *dev_wwn, + struct se_device **_found_dev, + struct percpu_ref **_found_lun_ref) { - struct xcopy_dev_search_info info; - int ret; - - memset(&info, 0, sizeof(info)); - info.dev_wwn = dev_wwn; - - ret = target_for_each_device(target_xcopy_locate_se_dev_e4_iter, &info); - if (ret == 1) { - *found_dev = info.found_dev; - return 0; - } else { - pr_debug_ratelimited("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n"); - return -EINVAL; + struct se_dev_entry *deve; + struct se_node_acl *nacl; + struct se_lun *this_lun = NULL; + struct se_device *found_dev = NULL; + + /* cmd with NULL sess indicates no associated $FABRIC_MOD */ + if (!sess) + goto err_out; + + pr_debug("XCOPY 0xe4: searching for: %*ph\n", + XCOPY_NAA_IEEE_REGEX_LEN, dev_wwn); + + nacl = sess->se_node_acl; + rcu_read_lock(); + hlist_for_each_entry_rcu(deve, &nacl->lun_entry_hlist, link) { + struct se_device *this_dev; + int rc; + + this_lun = rcu_dereference(deve->se_lun); + this_dev = rcu_dereference_raw(this_lun->lun_se_dev); + + rc = target_xcopy_locate_se_dev_e4_iter(this_dev, dev_wwn); + if (rc) { + if (percpu_ref_tryget_live(&this_lun->lun_ref)) + found_dev = this_dev; + break; + } } + rcu_read_unlock(); + if (found_dev == NULL) + goto err_out; + + pr_debug("lun_ref held for se_dev: %p se_dev->se_dev_group: %p\n", + found_dev, &found_dev->dev_group); + *_found_dev = found_dev; + *_found_lun_ref = &this_lun->lun_ref; + return 0; +err_out: + pr_debug_ratelimited("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n"); + return -EINVAL; } static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop, @@ -255,12 +278,16 @@ static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd, switch (xop->op_origin) { case XCOL_SOURCE_RECV_OP: - rc = target_xcopy_locate_se_dev_e4(xop->dst_tid_wwn, - &xop->dst_dev); + rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess, + xop->dst_tid_wwn, + &xop->dst_dev, + &xop->remote_lun_ref); break; case XCOL_DEST_RECV_OP: - rc = target_xcopy_locate_se_dev_e4(xop->src_tid_wwn, - &xop->src_dev); + rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess, + xop->src_tid_wwn, + &xop->src_dev, + &xop->remote_lun_ref); break; default: pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - " @@ -412,18 +439,12 @@ static int xcopy_pt_get_cmd_state(struct se_cmd *se_cmd) static void xcopy_pt_undepend_remotedev(struct xcopy_op *xop) { - struct se_device *remote_dev; - if (xop->op_origin == XCOL_SOURCE_RECV_OP) - remote_dev = xop->dst_dev; + pr_debug("putting dst lun_ref for %p\n", xop->dst_dev); else - remote_dev = xop->src_dev; - - pr_debug("Calling configfs_undepend_item for" - " remote_dev: %p remote_dev->dev_group: %p\n", - remote_dev, &remote_dev->dev_group.cg_item); + pr_debug("putting src lun_ref for %p\n", xop->src_dev); - target_undepend_item(&remote_dev->dev_group.cg_item); + percpu_ref_put(xop->remote_lun_ref); } static void xcopy_pt_release_cmd(struct se_cmd *se_cmd) diff --git a/drivers/target/target_core_xcopy.h b/drivers/target/target_core_xcopy.h index 26ba4c3c9cff..974bc1e19ff2 100644 --- a/drivers/target/target_core_xcopy.h +++ b/drivers/target/target_core_xcopy.h @@ -29,6 +29,7 @@ struct xcopy_op { struct se_device *dst_dev; unsigned char dst_tid_wwn[XCOPY_NAA_IEEE_REGEX_LEN]; unsigned char local_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN]; + struct percpu_ref *remote_lun_ref; sector_t src_lba; sector_t dst_lba; -- 2.25.1