From: Sean Young <sean@mess.org> stable inclusion from stable-v5.10.224 commit 2de18b5cc38e83428316d6d6d05a702208fb299b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAS2LK Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- commit 0c84bde4f37ba27d50e4c70ecacd33fe4a57030d upstream. This reverts commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c. This breaks the TeVii s480 dual DVB-S2 S660. The device has a bulk in endpoint but no corresponding out endpoint, so the device does not pass the "has both receive and send bulk endpoint" test. Seemingly this device does not use dvb_usb_generic_rw() so I have tried removing the generic_bulk_ctrl_endpoint entry, but this resulted in different problems. As we have no explanation yet, revert. $ dmesg | grep -i -e dvb -e dw21 -e usb\ 4 [ 0.999122] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.023123] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.130247] usb 1-1: New USB device found, idVendor=9022, idProduct=d482, +bcdDevice= 0.01 [ 1.130257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.152323] usb 4-1: New USB device found, idVendor=9022, idProduct=d481, +bcdDevice= 0.01 [ 1.152329] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.701033] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to +load a firmware [ 6.701178] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' [ 6.701179] dw2102: start downloading DW210X firmware [ 6.703715] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold +state, will try to load a firmware [ 6.703974] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 6.756432] usb 1-1: USB disconnect, device number 2 [ 6.862119] dvb-usb: found a 'TeVii S480.2 USB' in warm state. [ 6.862194] dvb-usb: TeVii S480.2 USB error while loading driver (-22) [ 6.862209] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to +load a firmware [ 6.862244] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw' [ 6.862245] dw2102: start downloading DW210X firmware [ 6.914811] usb 4-1: USB disconnect, device number 2 [ 7.014131] dvb-usb: found a 'TeVii S480.1 USB' in warm state. [ 7.014487] dvb-usb: TeVii S480.1 USB error while loading driver (-22) [ 7.014538] usbcore: registered new interface driver dw2102 Closes: https://lore.kernel.org/stable/20240801165146.38991f60@mir/ Fixes: 2052138b7da5 ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()") Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: stable@vger.kernel.org Conflicts: drivers/media/usb/dvb-usb/dvb-usb-init.c [Resolve conflicts due to changes in comments] Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> --- drivers/media/usb/dvb-usb/dvb-usb-init.c | 35 +++--------------------- 1 file changed, 4 insertions(+), 31 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c index 04af78316efd..39ac22486bcd 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c @@ -26,40 +26,11 @@ static int dvb_usb_force_pid_filter_usage; module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0)."); -static int dvb_usb_check_bulk_endpoint(struct dvb_usb_device *d, u8 endpoint) -{ - if (endpoint) { - int ret; - - ret = usb_pipe_type_check(d->udev, usb_sndbulkpipe(d->udev, endpoint)); - if (ret) - return ret; - ret = usb_pipe_type_check(d->udev, usb_rcvbulkpipe(d->udev, endpoint)); - if (ret) - return ret; - } - return 0; -} - -static void dvb_usb_clear_halt(struct dvb_usb_device *d, u8 endpoint) -{ - if (endpoint) { - usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, endpoint)); - usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, endpoint)); - } -} - static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) { struct dvb_usb_adapter *adap; int ret, n, o; - ret = dvb_usb_check_bulk_endpoint(d, d->props.generic_bulk_ctrl_endpoint); - if (ret) - return ret; - ret = dvb_usb_check_bulk_endpoint(d, d->props.generic_bulk_ctrl_endpoint_response); - if (ret) - return ret; for (n = 0; n < d->props.num_adapters; n++) { adap = &d->adapter[n]; adap->dev = d; @@ -129,8 +100,10 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) * when reloading the driver w/o replugging the device * sometimes a timeout occures, this helps */ - dvb_usb_clear_halt(d, d->props.generic_bulk_ctrl_endpoint); - dvb_usb_clear_halt(d, d->props.generic_bulk_ctrl_endpoint_response); + if (d->props.generic_bulk_ctrl_endpoint != 0) { + usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + } return 0; } -- 2.25.1