[PATCH kernel-4.19 1/2] x86/apic/vector: Force interupt handler invocation to irq context
From: Thomas Gleixner <tglx@linutronix.de> mainline inclusion from mainline-5.7 commit 008f1d60fe25810d4554916744b0975d76601b64 category: bugfix bugzilla: NA CVE: NA ------------------------------------------------- Sathyanarayanan reported that the PCI-E AER error injection mechanism can result in a NULL pointer dereference in apic_ack_edge(): BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 RIP: 0010:apic_ack_edge+0x1e/0x40 Call Trace: handle_edge_irq+0x7d/0x1e0 generic_handle_irq+0x27/0x30 aer_inject_write+0x53a/0x720 It crashes in irq_complete_move() which dereferences get_irq_regs() which is obviously NULL when this is called from non interrupt context. Of course the pointer could be checked, but that just papers over the real issue. Invoking the low level interrupt handling mechanism from random code can wreckage the fragile interrupt affinity mechanism of x86 as interrupts can only be moved in interrupt context or with special care when a CPU goes offline and the move has to be enforced. In the best case this triggers the warning in the MSI affinity setter, but if the call happens on the correct CPU it just corrupts state and might prevent further interrupt delivery for the affected device. Mark the APIC interrupts as unsuitable for being invoked in random contexts. This prevents the AER injection from proliferating the wreckage, but that's less broken than the current state of affairs and more correct than just papering over the problem by sprinkling random checks all over the place and silently corrupting state. Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200306130623.684591280@linutronix.de Signed-off-by: Liao Chang <liaochang1@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/x86/kernel/apic/vector.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c index a2a17704adc84..2114291badcdc 100644 --- a/arch/x86/kernel/apic/vector.c +++ b/arch/x86/kernel/apic/vector.c @@ -560,6 +560,12 @@ static int x86_vector_alloc_irqs(struct irq_domain *domain, unsigned int virq, irqd->chip_data = apicd; irqd->hwirq = virq + i; irqd_set_single_target(irqd); + /* + * Prevent that any of these interrupts is invoked in + * non interrupt context via e.g. generic_handle_irq() + * as that can corrupt the affinity move state. + */ + irqd_set_handle_enforce_irqctx(irqd); /* Don't invoke affinity setter on deactivated interrupts */ irqd_set_affinity_on_activate(irqd); -- 2.25.1
From: Hans de Goede <hdegoede@redhat.com> mainline inclusion from mainline-5.7 commit 17e5888e4e18 category: bugfix bugzilla: NA CVE: NA ------------------------------------------------- Modern x86 laptops are starting to use GPIO pins as interrupts more and more, e.g. touchpads and touchscreens have almost all moved away from PS/2 and USB to using I2C with a GPIO pin as interrupt. Modern x86 laptops also have almost all moved to using s2idle instead of using the system S3 ACPI power state to suspend. The Intel and AMD pinctrl drivers do not define irq_retrigger handlers for the irqchips they register, this is causing edge triggered interrupts which happen while suspended using s2idle to get lost. One specific example of this is the lid switch on some devices, lid switches used to be handled by the embedded-controller, but now the lid open/closed sensor is sometimes directly connected to a GPIO pin. On most devices the ACPI code for this looks like this: Method (_E00, ...) { Notify (LID0, 0x80) // Status Change } Where _E00 is an ACPI event handler for changes on both edges of the GPIO connected to the lid sensor, this event handler is then combined with an _LID method which directly reads the pin. When the device is resumed by opening the lid, the GPIO interrupt will wake the system, but because the pinctrl irqchip doesn't have an irq_retrigger handler, the Notify will not happen. This is not a problem in the case the _LID method directly reads the GPIO, because the drivers/acpi/button.c code will call _LID on resume anyways. But some devices have an event handler for the GPIO connected to the lid sensor which looks like this: Method (_E00, ...) { if (LID_GPIO == One) LIDS = One else LIDS = Zero Notify (LID0, 0x80) // Status Change } And the _LID method returns the cached LIDS value, since on open we do not re-run the edge-interrupt handler when we re-enable IRQS on resume (because of the missing irq_retrigger handler), _LID now will keep reporting closed, as LIDS was never changed to reflect the open status, this causes userspace to re-resume the laptop again shortly after opening the lid. The Intel GPIO controllers do not allow implementing irq_retrigger without emulating it in software, at which point we are better of just using the generic HARDIRQS_SW_RESEND mechanism rather then re-implementing software emulation for this separately in aprox. 14 different pinctrl drivers. Select HARDIRQS_SW_RESEND to solve the problem of edge-triggered GPIO interrupts not being re-triggered on resume when they were triggered during suspend (s2idle) and/or when they were the cause of the wakeup. This requires 008f1d60fe25 ("x86/apic/vector: Force interupt handler invocation to irq context") c16816acd086 ("genirq: Add protection against unsafe usage of generic_handle_irq()") to protect the APIC based interrupts from being wreckaged by a software resend. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200123210242.53367-1-hdegoede@redhat.com Signed-off-by: Liao Chang <liaochang1@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- arch/x86/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 2b89cf510913a..c1074c51f5042 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -110,6 +110,7 @@ config X86 select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select GENERIC_TIME_VSYSCALL + select HARDIRQS_SW_RESEND select HARDLOCKUP_CHECK_TIMESTAMP if X86_64 select HAVE_ACPI_APEI if ACPI select HAVE_ACPI_APEI_NMI if ACPI -- 2.25.1
participants (1)
-
Yang Yingliang