From: Kory Maincent <kory.maincent@bootlin.com> mainline inclusion from mainline-v6.8-rc7 commit bbcc1c83f343e580c3aa1f2a8593343bf7b55bba category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9Q8OH CVE: CVE-2024-27408 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- The Linked list element and pointer are not stored in the same memory as the eDMA controller register. If the doorbell register is toggled before the full write of the linked list a race condition error will occur. In remote setup we can only use a readl to the memory to assure the full write has occurred. Fixes: 7e4b8a4fbe2c ("dmaengine: Add Synopsys eDMA IP version 0 support") Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-6-8e8c1acb7a4... Signed-off-by: Vinod Koul <vkoul@kernel.org> Conflicts: drivers/dma/dw-edma/dw-edma-v0-core.c [wangxiongfeng: Remove the following check in the origin patch: 'if (!(chunk->chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL))'. Because DW_EDMA_CHIP_LOCAL is not introduced, and there is no member in struct dw_edma_chan. DW_EDMA_CHIP_LOCAL is only set for driver DW_EDMA_CHIP_LOCAL in commit 939fbcd568fd ("PCI: dwc: Add Root Port and Endpoint controller eDMA engine support", which is not merged in 5.10. Also change 'vaddr.io' to 'vaddr' because 'vaddr.io' is not introduced and these two have the same meaning. Refer to 16f8a08643b6 ("dmaengine: dw-edma: Add mem-mapped LL-entries support")] Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> --- drivers/dma/dw-edma/dw-edma-v0-core.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c index 692de47b1670..4016a3e07c7a 100644 --- a/drivers/dma/dw-edma/dw-edma-v0-core.c +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c @@ -233,6 +233,19 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk) SET_LL(&llp->llp_high, upper_32_bits(chunk->ll_region.paddr)); } +static void dw_edma_v0_sync_ll_data(struct dw_edma_chunk *chunk) +{ + /* + * In case of remote eDMA engine setup, the DW PCIe RP/EP internal + * configuration registers and application memory are normally accessed + * over different buses. Ensure LL-data reaches the memory before the + * doorbell register is toggled by issuing the dummy-read from the remote + * LL memory in a hope that the MRd TLP will return only after the + * last MWr TLP is completed + */ + readl(chunk->ll_region.vaddr); +} + void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first) { struct dw_edma_chan *chan = chunk->chan; @@ -262,6 +275,9 @@ void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first) SET_CH(dw, chan->dir, chan->id, llp_high, upper_32_bits(chunk->ll_region.paddr)); } + + dw_edma_v0_sync_ll_data(chunk); + /* Doorbell */ SET_RW(dw, chan->dir, doorbell, FIELD_PREP(EDMA_V0_DOORBELL_CH_MASK, chan->id)); -- 2.20.1