From: Willem de Bruijn <willemb@google.com> stable inclusion from linux-4.19.223 commit 5fefa884a55bd5995e77f4fdd89f0400f42b39f7 -------------------------------- [ Upstream commit 1ed1d592113959f00cc552c3b9f47ca2d157768f ] virtio_net_hdr_set_proto infers skb->protocol from the virtio_net_hdr gso_type, to avoid packets getting dropped for lack of a proto type. Its protocol choice is a guess, especially in the case of UFO, where the single VIRTIO_NET_HDR_GSO_UDP label covers both UFOv4 and UFOv6. Skip this best effort if the field is already initialized. Whether explicitly from userspace, or implicitly based on an earlier call to dev_parse_header_protocol (which is more robust, but was introduced after this patch). Fixes: 9d2f67e43b73 ("net/packet: fix packet drop as of virtio gso") Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211220145027.2784293-1-willemdebruijn.kernel@gma... Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- include/linux/virtio_net.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 3e2ee7739c11..a7c197299fc7 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -10,6 +10,9 @@ static inline int virtio_net_hdr_set_proto(struct sk_buff *skb, const struct virtio_net_hdr *hdr) { + if (skb->protocol) + return 0; + switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { case VIRTIO_NET_HDR_GSO_TCPV4: case VIRTIO_NET_HDR_GSO_UDP: -- 2.22.0

From: Fernando Fernandez Mancera <ffmancera@riseup.net> stable inclusion from linux-4.19.223 commit 4e4591490f8a930e11131514db4cce4201ffc8a5 -------------------------------- [ Upstream commit 1c15b05baea71a5ff98235783e3e4ad227760876 ] When 802.3ad bond mode is configured the ad_actor_system option is set to "00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors' system address it was failing with EINVAL. An all-zeroes ethernet address is valid, only multicast addresses are not valid values. Fixes: 171a42c38c6e ("bonding: add netlink support for sys prio, actor sys mac, and port key") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- Documentation/networking/bonding.txt | 11 ++++++----- drivers/net/bonding/bond_options.c | 2 +- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index e3abfbd32f71..b020e6ce6dd4 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -191,11 +191,12 @@ ad_actor_sys_prio ad_actor_system In an AD system, this specifies the mac-address for the actor in - protocol packet exchanges (LACPDUs). The value cannot be NULL or - multicast. It is preferred to have the local-admin bit set for this - mac but driver does not enforce it. If the value is not given then - system defaults to using the masters' mac address as actors' system - address. + protocol packet exchanges (LACPDUs). The value cannot be a multicast + address. If the all-zeroes MAC is specified, bonding will internally + use the MAC of the bond itself. It is preferred to have the + local-admin bit set for this mac but driver does not enforce it. If + the value is not given then system defaults to using the masters' + mac address as actors' system address. This parameter has effect only in 802.3ad mode and is available through SysFs interface. diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 7e07e213f4c2..1745cba04c18 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -1458,7 +1458,7 @@ static int bond_option_ad_actor_system_set(struct bonding *bond, mac = (u8 *)&newval->value; } - if (!is_valid_ether_addr(mac)) + if (is_multicast_ether_addr(mac)) goto err; netdev_dbg(bond->dev, "Setting ad_actor_system to %pM\n", mac); -- 2.22.0

From: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> stable inclusion from linux-4.19.223 commit eb84855d3e8799b67cdbadc7a5c53997cbfc3580 -------------------------------- commit 75d70d76cb7b927cace2cb34265d68ebb3306b13 upstream. If the workqueue allocation fails, the driver is marked as not initialized, and timer and panic_notifier will be left registered. Instead of removing those when workqueue allocation fails, do the workqueue initialization before doing it, and cleanup srcu_struct if it fails. Fixes: 1d49eb91e86e ("ipmi: Move remove_work to dedicated workqueue") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Corey Minyard <cminyard@mvista.com> Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Cc: stable@vger.kernel.org Message-Id: <20211217154410.1228673-2-cascardo@canonical.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/char/ipmi/ipmi_msghandler.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 9b66afeb1237..83eaab66d2f6 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -5087,20 +5087,23 @@ static int ipmi_init_msghandler(void) if (rv) goto out; - timer_setup(&ipmi_timer, ipmi_timeout, 0); - mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); - - atomic_notifier_chain_register(&panic_notifier_list, &panic_block); - remove_work_wq = create_singlethread_workqueue("ipmi-msghandler-remove-wq"); if (!remove_work_wq) { pr_err("unable to create ipmi-msghandler-remove-wq workqueue"); rv = -ENOMEM; - goto out; + goto out_wq; } + timer_setup(&ipmi_timer, ipmi_timeout, 0); + mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); + + atomic_notifier_chain_register(&panic_notifier_list, &panic_block); + initialized = true; +out_wq: + if (rv) + cleanup_srcu_struct(&ipmi_interfaces_srcu); out: mutex_unlock(&ipmi_interfaces_mutex); return rv; -- 2.22.0

From: Tom Rix <trix@redhat.com> stable inclusion from linux-4.19.224 commit c34a0b5b3bf01062eb5f2a47870c5ab57256bdfc -------------------------------- commit 732bc2ff080c447f8524f40c970c481f5da6eed3 upstream. Clang static analysis reports this warning hooks.c:5765:6: warning: 4th function call argument is an uninitialized value if (selinux_xfrm_postroute_last(sksec->sid, skb, &ad, proto)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ selinux_parse_skb() can return ok without setting proto. The later call to selinux_xfrm_postroute_last() does an early check of proto and can return ok if the garbage proto value matches. So initialize proto. Cc: stable@vger.kernel.org Fixes: eef9b41622f2 ("selinux: cleanup selinux_xfrm_sock_rcv_skb() and selinux_xfrm_postroute_last()") Signed-off-by: Tom Rix <trix@redhat.com> [PM: typo/spelling and checkpatch.pl description fixes] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- security/selinux/hooks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 1b611c068669..25353b4975c9 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -5799,7 +5799,7 @@ static unsigned int selinux_ip_postroute_compat(struct sk_buff *skb, struct common_audit_data ad; struct lsm_network_audit net = {0,}; char *addrp; - u8 proto; + u8 proto = 0; if (sk == NULL) return NF_ACCEPT; -- 2.22.0

From: Muchun Song <songmuchun@bytedance.com> stable inclusion from linux-4.19.224 commit a8e1944b44f94f5c5f530e434c5eaee787254566 -------------------------------- commit e22e45fc9e41bf9fcc1e92cfb78eb92786728ef0 upstream. A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1 Fixes: 61a7e26028b9 ("mib: put net statistics on struct net") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Cong Wang <cong.wang@bytedance.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- net/ipv4/af_inet.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 14e10214cf87..84ce4f86bc19 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1955,6 +1955,10 @@ static int __init inet_init(void) ip_init(); + /* Initialise per-cpu ipv4 mibs */ + if (init_ipv4_mibs()) + panic("%s: Cannot init ipv4 mibs\n", __func__); + /* Setup TCP slab cache for open requests. */ tcp_init(); @@ -1985,12 +1989,6 @@ static int __init inet_init(void) if (init_inet_pernet_ops()) pr_crit("%s: Cannot init ipv4 inet pernet ops\n", __func__); - /* - * Initialise per-cpu ipv4 mibs - */ - - if (init_ipv4_mibs()) - pr_crit("%s: Cannot init ipv4 mibs\n", __func__); ipv4_proc_init(); -- 2.22.0

From: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> stable inclusion from linux-4.19.225 commit e9c3f28e2b9eaff371db65e4bd7ee170616147b4 -------------------------------- commit f28439db470cca8b6b082239314e9fd10bd39034 upstream. Tag trace_percpu_buffer as a percpu pointer to resolve warnings reported by sparse: /linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3218:46: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3218:46: got struct trace_buffer_struct * /linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3234:9: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3234:9: got int * Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.164025530... Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Fixes: 07d777fe8c398 ("tracing: Add percpu buffers for trace_printk()") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- kernel/trace/trace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 5bd5eff5e0e0..119dd5fd5840 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2786,7 +2786,7 @@ struct trace_buffer_struct { char buffer[4][TRACE_BUF_SIZE]; }; -static struct trace_buffer_struct *trace_percpu_buffer; +static struct trace_buffer_struct __percpu *trace_percpu_buffer; /* * Thise allows for lockless recording. If we're nested too deeply, then @@ -2815,7 +2815,7 @@ static void put_trace_buf(void) static int alloc_percpu_trace_buffer(void) { - struct trace_buffer_struct *buffers; + struct trace_buffer_struct __percpu *buffers; buffers = alloc_percpu(struct trace_buffer_struct); if (WARN(!buffers, "Could not allocate percpu trace_printk buffer")) -- 2.22.0

From: David Ahern <dsahern@kernel.org> stable inclusion from linux-4.19.225 commit e30dead00aaa5a575b10117dad8edc126efc1873 -------------------------------- commit 1ff15a710a862db1101b97810af14aedc835a86a upstream. Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold an IPv6 address. Fixes: 6b9ea5a64ed5 ("ipv6: fix multipath route replace error recovery") Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- net/ipv6/route.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index a680498b1178..0db7a3ca668a 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -4617,7 +4617,11 @@ static int ip6_route_multipath_del(struct fib6_config *cfg, nla = nla_find(attrs, attrlen, RTA_GATEWAY); if (nla) { - nla_memcpy(&r_cfg.fc_gateway, nla, 16); + err = fib6_gw_from_attr(&r_cfg.fc_gateway, nla, + extack); + if (err) + return err; + r_cfg.fc_flags |= RTF_GATEWAY; } } -- 2.22.0

From: David Ahern <dsahern@kernel.org> stable inclusion from linux-4.19.225 commit dd74b4e027324219e51d9821c0db4368c9f8526a -------------------------------- [ Upstream commit 95bdba23b5b4aa75fe3e6c84335e638641c707bb ] As Nicolas noted, if gateway validation fails walking the multipath attribute the code should jump to the cleanup to free previously allocated memory. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern <dsahern@kernel.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- net/ipv6/route.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index e6b021588eb0..80dd55c436fa 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -4477,12 +4477,10 @@ static int ip6_route_multipath_add(struct fib6_config *cfg, nla = nla_find(attrs, attrlen, RTA_GATEWAY); if (nla) { - int ret; - - ret = fib6_gw_from_attr(&r_cfg.fc_gateway, nla, + err = fib6_gw_from_attr(&r_cfg.fc_gateway, nla, extack); - if (ret) - return ret; + if (err) + goto cleanup; r_cfg.fc_flags |= RTF_GATEWAY; } -- 2.22.0

From: William Zhao <wizhao@redhat.com> stable inclusion from linux-4.19.225 commit 6f1ce654347ad16977afcb315fd9a9114ed9739d -------------------------------- [ Upstream commit c1833c3964d5bd8c163bd4e01736a38bc473cb8a ] The "__ip6_tnl_parm" struct was left uninitialized causing an invalid load of random data when the "__ip6_tnl_parm" struct was used elsewhere. As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and containing random data, the UBSAN detected that "collect_md" held a non-boolean value. The UBSAN issue is as follows: =============================================================== UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14 load of value 30 is not a valid value for type '_Bool' CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: <TASK> dump_stack_lvl+0x44/0x57 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value+0x66/0x70 ? __cpuhp_setup_state+0x1d3/0x210 ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel] vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? vti6_rcv+0x100/0x100 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? rcu_read_lock_bh_held+0xc0/0xc0 ? lock_acquired+0x262/0xb10 dev_hard_start_xmit+0x1e6/0x820 __dev_queue_xmit+0x2079/0x3340 ? mark_lock.part.52+0xf7/0x1050 ? netdev_core_pick_tx+0x290/0x290 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 ? sched_clock_cpu+0x15/0x200 ? find_held_lock+0x3a/0x1c0 ? lock_release+0x42f/0xc90 ? lock_downgrade+0x6b0/0x6b0 ? mark_held_locks+0xb7/0x120 ? neigh_connected_output+0x31f/0x470 ? lockdep_hardirqs_on+0x79/0x100 ? neigh_connected_output+0x31f/0x470 ? ip6_finish_output2+0x9b0/0x1d90 ? rcu_read_lock_bh_held+0x62/0xc0 ? ip6_finish_output2+0x9b0/0x1d90 ip6_finish_output2+0x9b0/0x1d90 ? ip6_append_data+0x330/0x330 ? ip6_mtu+0x166/0x370 ? __ip6_finish_output+0x1ad/0xfb0 ? nf_hook_slow+0xa6/0x170 ip6_output+0x1fb/0x710 ? nf_hook.constprop.32+0x317/0x430 ? ip6_finish_output+0x180/0x180 ? __ip6_finish_output+0xfb0/0xfb0 ? lock_is_held_type+0xd9/0x130 ndisc_send_skb+0xb33/0x1590 ? __sk_mem_raise_allocated+0x11cf/0x1560 ? dst_output+0x4a0/0x4a0 ? ndisc_send_rs+0x432/0x610 addrconf_dad_completed+0x30c/0xbb0 ? addrconf_rs_timer+0x650/0x650 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 ? addrconf_dad_completed+0xbb0/0xbb0 ? rcu_read_lock_sched_held+0xaf/0xe0 ? rcu_read_lock_bh_held+0xc0/0xc0 process_one_work+0x97b/0x1740 ? pwq_dec_nr_in_flight+0x270/0x270 worker_thread+0x87/0xbf0 ? process_one_work+0x1740/0x1740 kthread+0x3ac/0x490 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x22/0x30 </TASK> =============================================================== The solution is to initialize "__ip6_tnl_parm" struct to zeros in the "vti6_siocdevprivate()" function. Signed-off-by: William Zhao <wizhao@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- net/ipv6/ip6_vti.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c index 290badfe70e0..866ce815625e 100644 --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -799,6 +799,8 @@ vti6_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) struct net *net = dev_net(dev); struct vti6_net *ip6n = net_generic(net, vti6_net_id); + memset(&p1, 0, sizeof(p1)); + switch (cmd) { case SIOCGETTUNNEL: if (dev == ip6n->fb_tnl_dev) { -- 2.22.0

From: Gang Li <ligang.bdlg@bytedance.com> stable inclusion from linux-4.19.226 commit 9a3354fc78b7d7a79026053272bb0b74900c28c1 -------------------------------- commit 62c9827cbb996c2c04f615ecd783ce28bcea894b upstream. Fix a data race in commit 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure"). Here are call traces causing race: Call Trace 1: shmem_unused_huge_shrink+0x3ae/0x410 ? __list_lru_walk_one.isra.5+0x33/0x160 super_cache_scan+0x17c/0x190 shrink_slab.part.55+0x1ef/0x3f0 shrink_node+0x10e/0x330 kswapd+0x380/0x740 kthread+0xfc/0x130 ? mem_cgroup_shrink_node+0x170/0x170 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x1f/0x30 Call Trace 2: shmem_evict_inode+0xd8/0x190 evict+0xbe/0x1c0 do_unlinkat+0x137/0x330 do_syscall_64+0x76/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 A simple explanation: Image there are 3 items in the local list (@list). In the first traversal, A is not deleted from @list. 1) A->B->C ^ | pos (leave) In the second traversal, B is deleted from @list. Concurrently, A is deleted from @list through shmem_evict_inode() since last reference counter of inode is dropped by other thread. Then the @list is corrupted. 2) A->B->C ^ ^ | | evict pos (drop) We should make sure the inode is either on the global list or deleted from any local list before iput(). Fixed by moving inodes back to global list before we put them. [akpm@linux-foundation.org: coding style fixes] Link: https://lkml.kernel.org/r/20211125064502.99983-1-ligang.bdlg@bytedance.com Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure") Signed-off-by: Gang Li <ligang.bdlg@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- mm/shmem.c | 37 +++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 16 deletions(-) diff --git a/mm/shmem.c b/mm/shmem.c index bc62dc732781..4363dbc8d57e 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -541,7 +541,7 @@ static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo, struct shmem_inode_info *info; struct page *page; unsigned long batch = sc ? sc->nr_to_scan : 128; - int removed = 0, split = 0; + int split = 0; if (list_empty(&sbinfo->shrinklist)) return SHRINK_STOP; @@ -556,7 +556,6 @@ static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo, /* inode is about to be evicted */ if (!inode) { list_del_init(&info->shrinklist); - removed++; goto next; } @@ -564,12 +563,12 @@ static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo, if (round_up(inode->i_size, PAGE_SIZE) == round_up(inode->i_size, HPAGE_PMD_SIZE)) { list_move(&info->shrinklist, &to_remove); - removed++; goto next; } list_move(&info->shrinklist, &list); next: + sbinfo->shrinklist_len--; if (!--batch) break; } @@ -589,7 +588,7 @@ static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo, inode = &info->vfs_inode; if (nr_to_split && split >= nr_to_split) - goto leave; + goto move_back; page = find_get_page(inode->i_mapping, (inode->i_size & HPAGE_PMD_MASK) >> PAGE_SHIFT); @@ -603,38 +602,44 @@ static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo, } /* - * Leave the inode on the list if we failed to lock - * the page at this time. + * Move the inode on the list back to shrinklist if we failed + * to lock the page at this time. * * Waiting for the lock may lead to deadlock in the * reclaim path. */ if (!trylock_page(page)) { put_page(page); - goto leave; + goto move_back; } ret = split_huge_page(page); unlock_page(page); put_page(page); - /* If split failed leave the inode on the list */ + /* If split failed move the inode on the list back to shrinklist */ if (ret) - goto leave; + goto move_back; split++; drop: list_del_init(&info->shrinklist); - removed++; -leave: + goto put; +move_back: + /* + * Make sure the inode is either on the global list or deleted + * from any local list before iput() since it could be deleted + * in another thread once we put the inode (then the local list + * is corrupted). + */ + spin_lock(&sbinfo->shrinklist_lock); + list_move(&info->shrinklist, &sbinfo->shrinklist); + sbinfo->shrinklist_len++; + spin_unlock(&sbinfo->shrinklist_lock); +put: iput(inode); } - spin_lock(&sbinfo->shrinklist_lock); - list_splice_tail(&list, &sbinfo->shrinklist); - sbinfo->shrinklist_len -= removed; - spin_unlock(&sbinfo->shrinklist_lock); - return split; } -- 2.22.0

From: Florian Westphal <fw@strlen.de> stable inclusion from linux-4.19.226 commit 519f563eca1b89965dd406a8f9807ca76562d202 -------------------------------- [ Upstream commit 28b78ecffea8078d81466b2e01bb5a154509f1ba ] This makes 'bridge-nf-filter-pppoe-tagged' sysctl work for bridged traffic. Looking at the original commit it doesn't appear this ever worked: static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff **pskb, [..] if (skb->protocol == htons(ETH_P_8021Q)) { skb_pull(skb, VLAN_HLEN); skb->network_header += VLAN_HLEN; + } else if (skb->protocol == htons(ETH_P_PPP_SES)) { + skb_pull(skb, PPPOE_SES_HLEN); + skb->network_header += PPPOE_SES_HLEN; } [..] NF_HOOK(... POST_ROUTING, ...) ... but the adjusted offsets are never restored. The alternative would be to rip this code out for good, but otoh we'd have to keep this anyway for the vlan handling (which works because vlan tag info is in the skb, not the packet payload). Reported-and-tested-by: Amish Chana <amish@3g.co.za> Fixes: 516299d2f5b6f97 ("[NETFILTER]: bridge-nf: filter bridged IPv4/IPv6 encapsulated in pppoe traffic") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- net/bridge/br_netfilter_hooks.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c index a403179eea49..fd5e3470560a 100644 --- a/net/bridge/br_netfilter_hooks.c +++ b/net/bridge/br_netfilter_hooks.c @@ -727,6 +727,9 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff if (nf_bridge->frag_max_size && nf_bridge->frag_max_size < mtu) mtu = nf_bridge->frag_max_size; + nf_bridge_update_protocol(skb); + nf_bridge_push_encap_header(skb); + if (skb_is_gso(skb) || skb->len + mtu_reserved <= mtu) { nf_bridge_info_free(skb); return br_dev_queue_push_xmit(net, sk, skb); @@ -744,8 +747,6 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff IPCB(skb)->frag_max_size = nf_bridge->frag_max_size; - nf_bridge_update_protocol(skb); - data = this_cpu_ptr(&brnf_frag_data_storage); data->vlan_tci = skb->vlan_tci; @@ -768,8 +769,6 @@ static int br_nf_dev_queue_xmit(struct net *net, struct sock *sk, struct sk_buff IP6CB(skb)->frag_max_size = nf_bridge->frag_max_size; - nf_bridge_update_protocol(skb); - data = this_cpu_ptr(&brnf_frag_data_storage); data->encap_size = nf_bridge_encap_header_len(skb); data->size = ETH_HLEN + data->encap_size; -- 2.22.0

From: Lino Sanfilippo <LinoSanfilippo@gmx.de> stable inclusion from linux-4.19.226 commit 0d9a1f0245ed6cadb37fabdf204b67f230160ca0 -------------------------------- [ Upstream commit d1180405c7b5c7a1c6bde79d5fc24fe931430737 ] With commit 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") the function devm_ioremap() called from pl011_setup_port() was replaced with devm_ioremap_resource(). Since this function not only remaps but also requests the ports io memory region it now collides with the .config_port() callback which requests the same region at uart port registration. Since devm_ioremap_resource() already claims the memory successfully, the request in .config_port() fails. Later at uart port deregistration the attempt to release the unclaimed memory also fails. The failure results in a “Trying to free nonexistent resource" warning. Fix these issues by removing the callbacks that implement the redundant memory allocation/release. Also make sure that changing the drivers io memory base address via TIOCSSERIAL is not allowed any more. Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20211129174238.8333-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/tty/serial/amba-pl011.c | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 1d27e006826d..aae97acd183a 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2160,32 +2160,13 @@ static const char *pl011_type(struct uart_port *port) return uap->port.type == PORT_AMBA ? uap->type : NULL; } -/* - * Release the memory region(s) being used by 'port' - */ -static void pl011_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, SZ_4K); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int pl011_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") - != NULL ? 0 : -EBUSY; -} - /* * Configure/autoconfigure the port. */ static void pl011_config_port(struct uart_port *port, int flags) { - if (flags & UART_CONFIG_TYPE) { + if (flags & UART_CONFIG_TYPE) port->type = PORT_AMBA; - pl011_request_port(port); - } } /* @@ -2200,6 +2181,8 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) ret = -EINVAL; if (ser->baud_base < 9600) ret = -EINVAL; + if (port->mapbase != (unsigned long) ser->iomem_base) + ret = -EINVAL; return ret; } @@ -2217,8 +2200,6 @@ static const struct uart_ops amba_pl011_pops = { .flush_buffer = pl011_dma_flush_buffer, .set_termios = pl011_set_termios, .type = pl011_type, - .release_port = pl011_release_port, - .request_port = pl011_request_port, .config_port = pl011_config_port, .verify_port = pl011_verify_port, #ifdef CONFIG_CONSOLE_POLL @@ -2248,8 +2229,6 @@ static const struct uart_ops sbsa_uart_pops = { .shutdown = sbsa_uart_shutdown, .set_termios = sbsa_uart_set_termios, .type = pl011_type, - .release_port = pl011_release_port, - .request_port = pl011_request_port, .config_port = pl011_config_port, .verify_port = pl011_verify_port, #ifdef CONFIG_CONSOLE_POLL -- 2.22.0

From: Eric Dumazet <edumazet@google.com> stable inclusion from linux-4.19.226 commit fcb8f503d607d18b9fc69613e38358aae9f9fa99 -------------------------------- [ Upstream commit 7770a39d7c63faec6c4f33666d49a8cb664d0482 ] copy_user_offload() will actually push a struct struct xfrm_user_offload, which is different than (struct xfrm_state *)->xso (struct xfrm_state_offload) Fixes: d77e38e612a01 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- net/xfrm/xfrm_user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index f94abe1fdd58..87932f6ad9d7 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -2813,7 +2813,7 @@ static inline unsigned int xfrm_sa_len(struct xfrm_state *x) if (x->props.extra_flags) l += nla_total_size(sizeof(x->props.extra_flags)); if (x->xso.dev) - l += nla_total_size(sizeof(x->xso)); + l += nla_total_size(sizeof(struct xfrm_user_offload)); if (x->props.smark.v | x->props.smark.m) { l += nla_total_size(sizeof(x->props.smark.v)); l += nla_total_size(sizeof(x->props.smark.m)); -- 2.22.0

From: Antony Antony <antony.antony@secunet.com> stable inclusion from linux-4.19.226 commit f7594c07fb0270c5414460432d3344b8831789c2 -------------------------------- [ Upstream commit 8dce43919566f06e865f7e8949f5c10d8c2493f5 ] xfrm interface if_id = 0 would cause xfrm policy lookup errors since Commit 9f8550e4bd9d. Now explicitly fail to create an xfrm interface when if_id = 0 With this commit: ip link add ipsec0 type xfrm dev lo if_id 0 Error: if_id must be non zero. v1->v2 change: - add Fixes: tag Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces") Signed-off-by: Antony Antony <antony.antony@secunet.com> Reviewed-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- net/xfrm/xfrm_interface.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c index 9dd43319b2c0..6bfd7b8249da 100644 --- a/net/xfrm/xfrm_interface.c +++ b/net/xfrm/xfrm_interface.c @@ -662,11 +662,16 @@ static int xfrmi_newlink(struct net *src_net, struct net_device *dev, struct netlink_ext_ack *extack) { struct net *net = dev_net(dev); - struct xfrm_if_parms p; + struct xfrm_if_parms p = {}; struct xfrm_if *xi; int err; xfrmi_netlink_parms(data, &p); + if (!p.if_id) { + NL_SET_ERR_MSG(extack, "if_id must be non zero"); + return -EINVAL; + } + xi = xfrmi_locate(net, &p); if (xi) return -EEXIST; @@ -691,7 +696,12 @@ static int xfrmi_changelink(struct net_device *dev, struct nlattr *tb[], { struct xfrm_if *xi = netdev_priv(dev); struct net *net = xi->net; - struct xfrm_if_parms p; + struct xfrm_if_parms p = {}; + + if (!p.if_id) { + NL_SET_ERR_MSG(extack, "if_id must be non zero"); + return -EINVAL; + } xfrmi_netlink_parms(data, &p); xi = xfrmi_locate(net, &p); -- 2.22.0

From: Xin Xiong <xiongx18@fudan.edu.cn> stable inclusion from linux-4.19.226 commit f0351a2178fa64f87e609c341f07bf4260b10daf -------------------------------- [ Upstream commit d94a69cb2cfa77294921aae9afcfb866e723a2da ] The issue takes place in one error path of clusterip_tg_check(). When memcmp() returns nonzero, the function simply returns the error code, forgetting to decrease the reference count of a clusterip_config object, which is bumped earlier by clusterip_config_find_get(). This may incur reference count leak. Fix this issue by decrementing the refcount of the object in specific error path. Fixes: 06aa151ad1fc74 ("netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- net/ipv4/netfilter/ipt_CLUSTERIP.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c index 2c11050d679b..08297d3504cf 100644 --- a/net/ipv4/netfilter/ipt_CLUSTERIP.c +++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c @@ -509,8 +509,11 @@ static int clusterip_tg_check(const struct xt_tgchk_param *par) if (IS_ERR(config)) return PTR_ERR(config); } - } else if (memcmp(&config->clustermac, &cipinfo->clustermac, ETH_ALEN)) + } else if (memcmp(&config->clustermac, &cipinfo->clustermac, ETH_ALEN)) { + clusterip_config_entry_put(config); + clusterip_config_put(config); return -EINVAL; + } ret = nf_ct_netns_get(par->net, par->family); if (ret < 0) { -- 2.22.0

From: Pavel Skripkin <paskripkin@gmail.com> stable inclusion from linux-4.19.226 commit e0b2cd310d0859907a9a7b4e4ef9a5bcce9d3d6d -------------------------------- [ Upstream commit d668769eb9c52b150753f1653f7f5a0aeb8239d2 ] Syzbot reported uninit value in mcs7830_bind(). The problem was in missing validation check for bytes read via usbnet_read_cmd(). usbnet_read_cmd() internally calls usb_control_msg(), that returns number of bytes read. Code should validate that requested number of bytes was actually read. So, this patch adds missing size validation check inside mcs7830_get_reg() to prevent uninit value bugs Reported-and-tested-by: syzbot+003c0a286b9af5412510@syzkaller.appspotmail.com Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220106225716.7425-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/net/usb/mcs7830.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index 5a47e5510ca8..c0f52a622964 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -121,8 +121,16 @@ static const char driver_name[] = "MOSCHIP usb-ethernet driver"; static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data) { - return usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ, - 0x0000, index, data, size); + int ret; + + ret = usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ, + 0x0000, index, data, size); + if (ret < 0) + return ret; + else if (ret < size) + return -ENODATA; + + return ret; } static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data) -- 2.22.0

From: Hector Martin <marcan@marcan.st> stable inclusion from linux-4.19.226 commit 4208239d748b5a8f32d5c2323d6f385dcb7f9b9e -------------------------------- [ Upstream commit 9abe2ac834851a7d0b0756e295cf7a292c45ca53 ] Table descriptors were being installed without properly formatting the address using paddr_to_iopte, which does not match up with the iopte_deref in __arm_lpae_map. This is incorrect for the LPAE pte format, as it does not handle the high bits properly. This was found on Apple T6000 DARTs, which require a new pte format (different shift); adding support for that to paddr_to_iopte/iopte_to_paddr caused it to break badly, as even <48-bit addresses would end up incorrect in that case. Fixes: 6c89928ff7a0 ("iommu/io-pgtable-arm: Support 52-bit physical address") Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20211120031343.88034-1-marcan@marcan.st Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/iommu/io-pgtable-arm.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c index efd6e994678f..3f99077b3611 100644 --- a/drivers/iommu/io-pgtable-arm.c +++ b/drivers/iommu/io-pgtable-arm.c @@ -299,11 +299,12 @@ static int arm_lpae_init_pte(struct arm_lpae_io_pgtable *data, static arm_lpae_iopte arm_lpae_install_table(arm_lpae_iopte *table, arm_lpae_iopte *ptep, arm_lpae_iopte curr, - struct io_pgtable_cfg *cfg) + struct arm_lpae_io_pgtable *data) { arm_lpae_iopte old, new; + struct io_pgtable_cfg *cfg = &data->iop.cfg; - new = __pa(table) | ARM_LPAE_PTE_TYPE_TABLE; + new = paddr_to_iopte(__pa(table), data) | ARM_LPAE_PTE_TYPE_TABLE; if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS) new |= ARM_LPAE_PTE_NSTABLE; @@ -354,7 +355,7 @@ static int __arm_lpae_map(struct arm_lpae_io_pgtable *data, unsigned long iova, if (!cptep) return -ENOMEM; - pte = arm_lpae_install_table(cptep, ptep, 0, cfg); + pte = arm_lpae_install_table(cptep, ptep, 0, data); if (pte) __arm_lpae_free_pages(cptep, tblsz, cfg); } else if (!cfg->coherent_walk && !(pte & ARM_LPAE_PTE_SW_SYNC)) { @@ -513,7 +514,7 @@ static size_t arm_lpae_split_blk_unmap(struct arm_lpae_io_pgtable *data, __arm_lpae_init_pte(data, blk_paddr, pte, lvl, &tablep[i]); } - pte = arm_lpae_install_table(tablep, ptep, blk_pte, cfg); + pte = arm_lpae_install_table(tablep, ptep, blk_pte, data); if (pte != blk_pte) { __arm_lpae_free_pages(tablep, tablesz, cfg); /* -- 2.22.0

From: Arnd Bergmann <arnd@arndb.de> stable inclusion from linux-4.19.226 commit c976850fa06cca6675f24fdd5b44cb13ea9d7189 -------------------------------- [ Upstream commit 134c37fa250a87a7e77c80a7c59ae16c462e46e0 ] The last driver referencing the slave_id on Marvell PXA and MMP platforms was the SPI driver, but this stopped doing so a long time ago, so the TODO from the earlier patch can no be removed. Fixes: b729bf34535e ("spi/pxa2xx: Don't use slave_id of dma_slave_config") Fixes: 13b3006b8ebd ("dma: mmp_pdma: add filter function") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211122222203.4103644-7-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/dma/mmp_pdma.c | 6 ------ drivers/dma/pxa_dma.c | 7 ------- 2 files changed, 13 deletions(-) diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c index eb3a1f42ab06..e8b2d3e31de8 100644 --- a/drivers/dma/mmp_pdma.c +++ b/drivers/dma/mmp_pdma.c @@ -722,12 +722,6 @@ static int mmp_pdma_config(struct dma_chan *dchan, chan->dir = cfg->direction; chan->dev_addr = addr; - /* FIXME: drivers should be ported over to use the filter - * function. Once that's done, the following two lines can - * be removed. - */ - if (cfg->slave_id) - chan->drcmr = cfg->slave_id; return 0; } diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c index b31c28b67ad3..c54986902b9d 100644 --- a/drivers/dma/pxa_dma.c +++ b/drivers/dma/pxa_dma.c @@ -960,13 +960,6 @@ static void pxad_get_config(struct pxad_chan *chan, *dcmd |= PXA_DCMD_BURST16; else if (maxburst == 32) *dcmd |= PXA_DCMD_BURST32; - - /* FIXME: drivers should be ported over to use the filter - * function. Once that's done, the following two lines can - * be removed. - */ - if (chan->cfg.slave_id) - chan->drcmr = chan->cfg.slave_id; } static struct dma_async_tx_descriptor * -- 2.22.0

From: Suresh Kumar <surkumar@redhat.com> stable inclusion from linux-4.19.226 commit 4cca06db20796f60ad83943b80664ef0d652dcac -------------------------------- [ Upstream commit fee32de284ac277ba434a2d59f8ce46528ff3946 ] Currently "bond_should_notify_peers: slave ..." messages are printed whenever "bond_should_notify_peers" function is called. +++ Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 ... Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 +++ This is confusing and can also clutter up debug logs. Print logs only when the peer notification happens. Signed-off-by: Suresh Kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/net/bonding/bond_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c952ab169e4e..f4d40e983e99 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -782,9 +782,6 @@ static bool bond_should_notify_peers(struct bonding *bond) slave = rcu_dereference(bond->curr_active_slave); rcu_read_unlock(); - netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n", - slave ? slave->dev->name : "NULL"); - if (!slave || !bond->send_peer_notif || bond->send_peer_notif % max(1, bond->params.peer_notif_delay) != 0 || @@ -792,6 +789,9 @@ static bool bond_should_notify_peers(struct bonding *bond) test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state)) return false; + netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n", + slave ? slave->dev->name : "NULL"); + return true; } -- 2.22.0

From: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz> stable inclusion from linux-4.19.226 commit c0b59abaf8effbac022f6d8b526c4b0b620920b3 -------------------------------- [ Upstream commit aa39cc675799bc92da153af9a13d6f969c348e82 ] GC task can deadlock in read_cache_page() because it may attempt to release a page that is actually allocated by another task in jffs2_write_begin(). The reason is that in jffs2_write_begin() there is a small window a cache page is allocated for use but not set Uptodate yet. This ends up with a deadlock between two tasks: 1) A task (e.g. file copy) - jffs2_write_begin() locks a cache page - jffs2_write_end() tries to lock "alloc_sem" from jffs2_reserve_space() <-- STUCK 2) GC task (jffs2_gcd_mtd3) - jffs2_garbage_collect_pass() locks "alloc_sem" - try to lock the same cache page in read_cache_page() <-- STUCK So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin() while reading data in a cache page. Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- fs/jffs2/file.c | 40 +++++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 15 deletions(-) diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c index 7d8654a1472e..3047872fdac9 100644 --- a/fs/jffs2/file.c +++ b/fs/jffs2/file.c @@ -135,20 +135,15 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, struct page *pg; struct inode *inode = mapping->host; struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb); pgoff_t index = pos >> PAGE_SHIFT; uint32_t pageofs = index << PAGE_SHIFT; int ret = 0; - pg = grab_cache_page_write_begin(mapping, index, flags); - if (!pg) - return -ENOMEM; - *pagep = pg; - jffs2_dbg(1, "%s()\n", __func__); if (pageofs > inode->i_size) { /* Make new hole frag from old EOF to new page */ - struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb); struct jffs2_raw_inode ri; struct jffs2_full_dnode *fn; uint32_t alloc_len; @@ -159,7 +154,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len, ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); if (ret) - goto out_page; + goto out_err; mutex_lock(&f->sem); memset(&ri, 0, sizeof(ri)); @@ -189,7 +184,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, ret = PTR_ERR(fn); jffs2_complete_reservation(c); mutex_unlock(&f->sem); - goto out_page; + goto out_err; } ret = jffs2_add_full_dnode_to_inode(c, f, fn); if (f->metadata) { @@ -204,13 +199,26 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, jffs2_free_full_dnode(fn); jffs2_complete_reservation(c); mutex_unlock(&f->sem); - goto out_page; + goto out_err; } jffs2_complete_reservation(c); inode->i_size = pageofs; mutex_unlock(&f->sem); } + /* + * While getting a page and reading data in, lock c->alloc_sem until + * the page is Uptodate. Otherwise GC task may attempt to read the same + * page in read_cache_page(), which causes a deadlock. + */ + mutex_lock(&c->alloc_sem); + pg = grab_cache_page_write_begin(mapping, index, flags); + if (!pg) { + ret = -ENOMEM; + goto release_sem; + } + *pagep = pg; + /* * Read in the page if it wasn't already present. Cannot optimize away * the whole page write case until jffs2_write_end can handle the @@ -220,15 +228,17 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, mutex_lock(&f->sem); ret = jffs2_do_readpage_nolock(inode, pg); mutex_unlock(&f->sem); - if (ret) - goto out_page; + if (ret) { + unlock_page(pg); + put_page(pg); + goto release_sem; + } } jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags); - return ret; -out_page: - unlock_page(pg); - put_page(pg); +release_sem: + mutex_unlock(&c->alloc_sem); +out_err: return ret; } -- 2.22.0

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> stable inclusion from linux-4.19.226 commit addda1b65b5dfbbdff0f1e100aed0a72b8af5bb8 -------------------------------- [ Upstream commit 24ea5f90ec9548044a6209685c5010edd66ffe8f ] ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class, acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to obtain return_desc which may require additional resolution with the help of acpi_ex_read_data_from_field (). If the latter fails, the reference counter of the original return_desc is decremented which is incorrect, because acpi_ns_get_attached_object () does not increment the reference counter of the object returned by it. This issue may lead to premature deletion of the attached object while it is still attached and a use-after-free and crash in the host OS. For example, this may happen when on evaluation of ref_of() a local region field where there is no registered handler for the given Operation Region. Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away after a acpi_ex_read_data_from_field () failure. Link: https://github.com/acpica/acpica/commit/d984f120 Link: https://github.com/acpica/acpica/pull/685 Reported-by: Lenny Szubowicz <lszubowi@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/acpi/acpica/exoparg1.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c index ba9fbae0cf91..319f4bc6a839 100644 --- a/drivers/acpi/acpica/exoparg1.c +++ b/drivers/acpi/acpica/exoparg1.c @@ -1007,7 +1007,8 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) (walk_state, return_desc, &temp_desc); if (ACPI_FAILURE(status)) { - goto cleanup; + return_ACPI_STATUS + (status); } return_desc = temp_desc; -- 2.22.0

From: Joe Thornber <ejt@redhat.com> stable inclusion from linux-4.19.226 commit 7d585b602a5c054e810b8f47183069872ac2fdf6 -------------------------------- [ Upstream commit cba23ac158db7f3cd48a923d6861bee2eb7a2978 ] Corrupted metadata could warrant returning error from sm_ll_lookup_bitmap(). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/md/persistent-data/dm-space-map-common.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c index a284762e548e..5115a2719603 100644 --- a/drivers/md/persistent-data/dm-space-map-common.c +++ b/drivers/md/persistent-data/dm-space-map-common.c @@ -279,6 +279,11 @@ int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result) struct disk_index_entry ie_disk; struct dm_block *blk; + if (b >= ll->nr_blocks) { + DMERR_LIMIT("metadata block out of bounds"); + return -EINVAL; + } + b = do_div(index, ll->entries_per_block); r = ll->load_ie(ll, index, &ie_disk); if (r < 0) -- 2.22.0

From: Lukas Wunner <lukas@wunner.de> stable inclusion from linux-4.19.226 commit 510aa43c9928ca38f1210b6c255373727d7ea312 -------------------------------- commit d3b3404df318504ec084213ab1065b73f49b0f1d upstream. Commit a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS") sought to deassert RTS when opening an rs485-enabled uart port. That way, the transceiver does not occupy the bus until it transmits data. Unfortunately, the commit mixed up the logic and *asserted* RTS instead of *deasserting* it: The commit amended uart_port_dtr_rts(), which raises DTR and RTS when opening an rs232 port. "Raising" actually means lowering the signal that's coming out of the uart, because an rs232 transceiver not only changes a signal's voltage level, it also *inverts* the signal. See the simplified schematic in the MAX232 datasheet for an example: https://www.ti.com/lit/ds/symlink/max232.pdf So, to raise RTS on an rs232 port, TIOCM_RTS is *set* in port->mctrl and that results in the signal being driven low. In contrast to rs232, the signal level for rs485 Transmit Enable is the identity, not the inversion: If the transceiver expects a "high" RTS signal for Transmit Enable, the signal coming out of the uart must also be high, so TIOCM_RTS must be *cleared* in port->mctrl. The commit did the exact opposite, but it's easy to see why given the confusing semantics of rs232 and rs485. Fix it. Fixes: a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS") Cc: stable@vger.kernel.org # v4.14+ Cc: Rafael Gago Castano <rgc@hms.se> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Su Bao Cheng <baocheng.su@siemens.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/9395767847833f2f3193c49cde38501eeb3b5669.163982105... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/tty/serial/serial_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 4e60045487a8..8d8d63c3ca7d 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -159,7 +159,7 @@ static void uart_port_dtr_rts(struct uart_port *uport, int raise) int RTS_after_send = !!(uport->rs485.flags & SER_RS485_RTS_AFTER_SEND); if (raise) { - if (rs485_on && !RTS_after_send) { + if (rs485_on && RTS_after_send) { uart_set_mctrl(uport, TIOCM_DTR); uart_clear_mctrl(uport, TIOCM_RTS); } else { @@ -168,7 +168,7 @@ static void uart_port_dtr_rts(struct uart_port *uport, int raise) } else { unsigned int clear = TIOCM_DTR; - clear |= (!rs485_on || !RTS_after_send) ? TIOCM_RTS : 0; + clear |= (!rs485_on || RTS_after_send) ? TIOCM_RTS : 0; uart_clear_mctrl(uport, clear); } } -- 2.22.0

From: Jan Kara <jack@suse.cz> stable inclusion from linux-4.19.226 commit ef41f72716c469a670b9d556b65e5ed83a3a5fd7 -------------------------------- commit 4013d47a5307fdb5c13370b5392498b00fedd274 upstream. When we succeed in enabling some quota type but fail to enable another one with quota feature, we correctly disable all enabled quota types. However we forget to reset i_data_sem lockdep class. When the inode gets freed and reused, it will inherit this lockdep class (i_data_sem is initialized only when a slab is created) and thus eventually lockdep barfs about possible deadlocks. Reported-and-tested-by: syzbot+3b6f9218b1301ddda3e2@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20211007155336.12493-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- fs/ext4/super.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 8f9d60ec607e..3100f4aa2d59 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -6166,8 +6166,19 @@ static int ext4_enable_quotas(struct super_block *sb) "Failed to enable quota tracking " "(type=%d, err=%d). Please run " "e2fsck to fix.", type, err); - for (type--; type >= 0; type--) + for (type--; type >= 0; type--) { + struct inode *inode; + + inode = sb_dqopt(sb)->files[type]; + if (inode) + inode = igrab(inode); dquot_quota_off(sb, type); + if (inode) { + lockdep_set_quota_inode(inode, + I_DATA_SEM_NORMAL); + iput(inode); + } + } return err; } -- 2.22.0

From: Luís Henriques <lhenriques@suse.de> stable inclusion from linux-4.19.226 commit 9103cafdc4531285b6ededd0a3437effd71ff255 -------------------------------- commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream. When migrating to extents, the temporary inode will have it's own checksum seed. This means that, when swapping the inodes data, the inode checksums will be incorrect. This can be fixed by recalculating the extents checksums again. Or simply by copying the seed into the temporary inode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357 Reported-by: Jeroen van Wolffelaar <jeroen@wolffelaar.nl> Signed-off-by: Luís Henriques <lhenriques@suse.de> Link: https://lore.kernel.org/r/20211214175058.19511-1-lhenriques@suse.de Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- fs/ext4/migrate.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c index 7eb036cd1d93..0b3194b59d12 100644 --- a/fs/ext4/migrate.c +++ b/fs/ext4/migrate.c @@ -457,6 +457,17 @@ int ext4_ext_migrate(struct inode *inode) ext4_journal_stop(handle); goto out_unlock; } + /* + * Use the correct seed for checksum (i.e. the seed from 'inode'). This + * is so that the metadata blocks will have the correct checksum after + * the migration. + * + * Note however that, if a crash occurs during the migration process, + * the recovery process is broken because the tmp_inode checksums will + * be wrong and the orphans cleanup will fail. + */ + ei = EXT4_I(inode); + EXT4_I(tmp_inode)->i_csum_seed = ei->i_csum_seed; i_size_write(tmp_inode, i_size_read(inode)); /* * Set the i_nlink to zero so it will be deleted later @@ -500,7 +511,6 @@ int ext4_ext_migrate(struct inode *inode) goto out_tmp_inode; } - ei = EXT4_I(inode); i_data = ei->i_data; memset(&lb, 0, sizeof(lb)); -- 2.22.0

From: Marek Vasut <marex@denx.de> stable inclusion from linux-4.19.226 commit e670c4b7c1ca134463211b27af69695a3adcb846 -------------------------------- commit 29009604ad4e3ef784fd9b9fef6f23610ddf633d upstream. The include/linux/crypto.h struct crypto_alg field cra_driver_name description states "Unique name of the transformation provider. " ... " this contains the name of the chip or provider and the name of the transformation algorithm." In case of the stm32-crc driver, field cra_driver_name is identical for all registered transformation providers and set to the name of the driver itself, which is incorrect. This patch fixes it by assigning a unique cra_driver_name to each registered transformation provider. The kernel crash is triggered when the driver calls crypto_register_shashes() which calls crypto_register_shash(), which calls crypto_register_alg(), which calls __crypto_register_alg(), which returns -EEXIST, which is propagated back through this call chain. Upon -EEXIST from crypto_register_shash(), the crypto_register_shashes() starts unregistering the providers back, and calls crypto_unregister_shash(), which calls crypto_unregister_alg(), and this is where the BUG() triggers due to incorrect cra_refcnt. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> # 4.12+ Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Fabien Dessenne <fabien.dessenne@st.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Lionel Debieve <lionel.debieve@st.com> Cc: Nicolas Toromanoff <nicolas.toromanoff@st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-crypto@vger.kernel.org Acked-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- drivers/crypto/stm32/stm32_crc32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c index 29d2095d9dfd..48c4a71d1cb3 100644 --- a/drivers/crypto/stm32/stm32_crc32.c +++ b/drivers/crypto/stm32/stm32_crc32.c @@ -217,7 +217,7 @@ static struct shash_alg algs[] = { .digestsize = CHKSUM_DIGEST_SIZE, .base = { .cra_name = "crc32", - .cra_driver_name = DRIVER_NAME, + .cra_driver_name = "stm32-crc32-crc32", .cra_priority = 200, .cra_flags = CRYPTO_ALG_OPTIONAL_KEY, .cra_blocksize = CHKSUM_BLOCK_SIZE, @@ -239,7 +239,7 @@ static struct shash_alg algs[] = { .digestsize = CHKSUM_DIGEST_SIZE, .base = { .cra_name = "crc32c", - .cra_driver_name = DRIVER_NAME, + .cra_driver_name = "stm32-crc32-crc32c", .cra_priority = 200, .cra_flags = CRYPTO_ALG_OPTIONAL_KEY, .cra_blocksize = CHKSUM_BLOCK_SIZE, -- 2.22.0

From: Eric Dumazet <edumazet@google.com> stable inclusion from linux-4.19.226 commit 4048cedfd16a995b2ef4294b9539da17e2fea750 -------------------------------- commit 2836615aa22de55b8fca5e32fe1b27a67cda625e upstream. When under stress, cleanup_net() can have to dismantle netns in big numbers. ops_exit_list() currently calls many helpers [1] that have no schedule point, and we can end up with soft lockups, particularly on hosts with many cpus. Even for moderate amount of netns processed by cleanup_net() this patch avoids latency spikes. [1] Some of these helpers like fib_sync_up() and fib_sync_down_dev() are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables, and ifindex is used as the only input of two hash functions. ifindexes tend to be the same for all netns (lo.ifindex==1 per instance) This will be fixed in a separate patch. Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- net/core/net_namespace.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index c60123dff803..f4aacbb76fa5 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -149,8 +149,10 @@ static void ops_exit_list(const struct pernet_operations *ops, { struct net *net; if (ops->exit) { - list_for_each_entry(net, net_exit_list, exit_list) + list_for_each_entry(net, net_exit_list, exit_list) { ops->exit(net); + cond_resched(); + } } if (ops->exit_batch) ops->exit_batch(net_exit_list); -- 2.22.0

From: Jan Kara <jack@suse.cz> stable inclusion from linux-4.19.227 commit 6717900f775a6129a7b4d03ba4922218d8bf1caa -------------------------------- commit 68514dacf2715d11b91ca50d88de047c086fea9c upstream. A task can end up indefinitely sleeping in do_select() -> poll_schedule_timeout() when the following race happens: TASK1 (thread1) TASK2 TASK1 (thread2) do_select() setup poll_wqueues table with 'fd' write data to 'fd' pollwake() table->triggered = 1 closes 'fd' thread1 is waiting for poll_schedule_timeout() - sees table->triggered table->triggered = 0 return -EINTR loop back in do_select() But at this point when TASK1 loops back, the fdget() in the setup of poll_wqueues fails. So now so we never find 'fd' is ready for reading and sleep in poll_schedule_timeout() indefinitely. Treat an fd that got closed as a fd on which some event happened. This makes sure cannot block indefinitely in do_select(). Another option would be to return -EBADF in this case but that has a potential of subtly breaking applications that excercise this behavior and it happens to work for them. So returning fd as active seems like a safer choice. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> --- fs/select.c | 63 ++++++++++++++++++++++++++++------------------------- 1 file changed, 33 insertions(+), 30 deletions(-) diff --git a/fs/select.c b/fs/select.c index b684f0dd6db8..67e4be14c00c 100644 --- a/fs/select.c +++ b/fs/select.c @@ -458,9 +458,11 @@ static int max_select_fd(unsigned long n, fd_set_bits *fds) return max; } -#define POLLIN_SET (EPOLLRDNORM | EPOLLRDBAND | EPOLLIN | EPOLLHUP | EPOLLERR) -#define POLLOUT_SET (EPOLLWRBAND | EPOLLWRNORM | EPOLLOUT | EPOLLERR) -#define POLLEX_SET (EPOLLPRI) +#define POLLIN_SET (EPOLLRDNORM | EPOLLRDBAND | EPOLLIN | EPOLLHUP | EPOLLERR |\ + EPOLLNVAL) +#define POLLOUT_SET (EPOLLWRBAND | EPOLLWRNORM | EPOLLOUT | EPOLLERR |\ + EPOLLNVAL) +#define POLLEX_SET (EPOLLPRI | EPOLLNVAL) static inline void wait_key_set(poll_table *wait, unsigned long in, unsigned long out, unsigned long bit, @@ -527,6 +529,7 @@ static int do_select(int n, fd_set_bits *fds, struct timespec64 *end_time) break; if (!(bit & all_bits)) continue; + mask = EPOLLNVAL; f = fdget(i); if (f.file) { wait_key_set(wait, in, out, bit, @@ -534,34 +537,34 @@ static int do_select(int n, fd_set_bits *fds, struct timespec64 *end_time) mask = vfs_poll(f.file, wait); fdput(f); - if ((mask & POLLIN_SET) && (in & bit)) { - res_in |= bit; - retval++; - wait->_qproc = NULL; - } - if ((mask & POLLOUT_SET) && (out & bit)) { - res_out |= bit; - retval++; - wait->_qproc = NULL; - } - if ((mask & POLLEX_SET) && (ex & bit)) { - res_ex |= bit; - retval++; - wait->_qproc = NULL; - } - /* got something, stop busy polling */ - if (retval) { - can_busy_loop = false; - busy_flag = 0; - - /* - * only remember a returned - * POLL_BUSY_LOOP if we asked for it - */ - } else if (busy_flag & mask) - can_busy_loop = true; - } + if ((mask & POLLIN_SET) && (in & bit)) { + res_in |= bit; + retval++; + wait->_qproc = NULL; + } + if ((mask & POLLOUT_SET) && (out & bit)) { + res_out |= bit; + retval++; + wait->_qproc = NULL; + } + if ((mask & POLLEX_SET) && (ex & bit)) { + res_ex |= bit; + retval++; + wait->_qproc = NULL; + } + /* got something, stop busy polling */ + if (retval) { + can_busy_loop = false; + busy_flag = 0; + + /* + * only remember a returned + * POLL_BUSY_LOOP if we asked for it + */ + } else if (busy_flag & mask) + can_busy_loop = true; + } if (res_in) *rinp = res_in; -- 2.22.0