[PATCH 01/88] scsi: mpt3sas: Define hba_port structure
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit b22a0fac8c056e88fc72f7241fa9077b804634a6 upstream. Define a new hba_port structure which holds the following variables: - port_id: Port ID of the narrow/wide port of the HBA - sas_address: SAS Address of the remote device that is attached to the current HBA port - phy_mask: HBA's phy bits to which above SAS addressed device is attached - flags: This field is used to refresh port details during HBA reset Link: https://lore.kernel.org/r/20201027130847.9962-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 35 ++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 86774747fe25..9a3429b1e7ce 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -420,6 +420,7 @@ struct Mpi2ManufacturingPage11_t { * @flags: MPT_TARGET_FLAGS_XXX flags * @deleted: target flaged for deletion * @tm_busy: target is busy with TM request. + * @port: hba port entry containing target's port number info * @sas_dev: The sas_device associated with this target * @pcie_dev: The pcie device associated with this target */ @@ -432,6 +433,7 @@ struct MPT3SAS_TARGET { u32 flags; u8 deleted; u8 tm_busy; + struct hba_port *port; struct _sas_device *sas_dev; struct _pcie_device *pcie_dev; }; @@ -534,6 +536,7 @@ struct _internal_cmd { * addition routine. * @chassis_slot: chassis slot * @is_chassis_slot_valid: chassis slot valid or not + * @port: hba port entry containing device's port number info */ struct _sas_device { struct list_head list; @@ -560,6 +563,7 @@ struct _sas_device { u8 is_chassis_slot_valid; u8 connector_name[5]; struct kref refcount; + struct hba_port *port; }; static inline void sas_device_get(struct _sas_device *s) @@ -730,6 +734,7 @@ struct _boot_device { * @remote_identify: attached device identification * @rphy: sas transport rphy object * @port: sas transport wide/narrow port object + * @hba_port: hba port entry containing port's port number info * @phy_list: _sas_phy list objects belonging to this port */ struct _sas_port { @@ -738,6 +743,7 @@ struct _sas_port { struct sas_identify remote_identify; struct sas_rphy *rphy; struct sas_port *port; + struct hba_port *hba_port; struct list_head phy_list; }; @@ -751,6 +757,7 @@ struct _sas_port { * @handle: device handle for this phy * @attached_handle: device handle for attached device * @phy_belongs_to_port: port has been created for this phy + * @port: hba port entry containing port number info */ struct _sas_phy { struct list_head port_siblings; @@ -761,6 +768,7 @@ struct _sas_phy { u16 handle; u16 attached_handle; u8 phy_belongs_to_port; + struct hba_port *port; }; /** @@ -776,6 +784,7 @@ struct _sas_phy { * @responding: used in _scsih_expander_device_mark_responding * @phy: a list of phys that make up this sas_host/expander * @sas_port_list: list of ports attached to this sas_host/expander + * @port: hba port entry containing node's port number info */ struct _sas_node { struct list_head list; @@ -787,11 +796,11 @@ struct _sas_node { u16 enclosure_handle; u64 enclosure_logical_id; u8 responding; + struct hba_port *port; struct _sas_phy *phy; struct list_head sas_port_list; }; - /** * struct _enclosure_node - enclosure information * @list: list of enclosures @@ -1009,6 +1018,27 @@ struct reply_post_struct { dma_addr_t reply_post_free_dma; }; +/** + * struct hba_port - Saves each HBA's Wide/Narrow port info + * @sas_address: sas address of this wide/narrow port's attached device + * @phy_mask: HBA PHY's belonging to this port + * @port_id: port number + * @flags: hba port flags + */ +struct hba_port { + struct list_head list; + u64 sas_address; + u32 phy_mask; + u8 port_id; + u8 flags; +}; + +/* hba port flags */ +#define HBA_PORT_FLAG_DIRTY_PORT 0x01 +#define HBA_PORT_FLAG_NEW_PORT 0x02 + +#define MULTIPATH_DISABLED_PORT_ID 0xFF + typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); /** * struct MPT3SAS_ADAPTER - per adapter struct @@ -1191,6 +1221,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * which ensures the syncrhonization between cli/sysfs_show path. * @atomic_desc_capable: Atomic Request Descriptor support. * @GET_MSIX_INDEX: Get the msix index of high iops queues. + * @port_table_list: list containing HBA's wide/narrow port's info */ struct MPT3SAS_ADAPTER { struct list_head list; @@ -1483,6 +1514,8 @@ struct MPT3SAS_ADAPTER { PUT_SMID_IO_FP_HIP put_smid_hi_priority; PUT_SMID_DEFAULT put_smid_default; GET_MSIX_INDEX get_msix_index_for_smlio; + + struct list_head port_table_list; }; struct mpt3sas_debugfs_buffer { -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit e238e71b6cb2b7b06224b31eb31892d1acb75f1d upstream. Allocate hba_port object whenever a new HBA's wide/narrow port is identified while processing the SASIOUnitPage0's phy data and add this object to port_table_list. Deallocate these objects during driver unload. Link: https://lore.kernel.org/r/20201027130847.9962-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 73 ++++++++++++++++++++++++++-- 1 file changed, 69 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 6742cbbf7002..68ddeee8d0c7 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -356,6 +356,30 @@ _scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number, SlotNumber)) ? 1 : 0; } +/** + * mpt3sas_get_port_by_id - get hba port entry corresponding to provided + * port number from port list + * @ioc: per adapter object + * @port_id: port number + * + * Search for hba port entry corresponding to provided port number, + * if available return port object otherwise return NULL. + */ +struct hba_port * +mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port_id) +{ + struct hba_port *port, *port_next; + + list_for_each_entry_safe(port, port_next, + &ioc->port_table_list, list) { + if (port->port_id == port_id && + !(port->flags & HBA_PORT_FLAG_DIRTY_PORT)) + return port; + } + + return NULL; +} + /** * _scsih_is_boot_device - search for matching boot device. * @sas_address: sas address @@ -5754,7 +5778,8 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) Mpi2ConfigReply_t mpi_reply; Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; u16 attached_handle; - u8 link_rate; + u8 link_rate, port_id; + struct hba_port *port; dtmprintk(ioc, ioc_info(ioc, "updating handles for sas_host(0x%016llx)\n", @@ -5778,13 +5803,28 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) for (i = 0; i < ioc->sas_hba.num_phys ; i++) { link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4; if (i == 0) - ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0-> - PhyData[0].ControllerDevHandle); + ioc->sas_hba.handle = le16_to_cpu( + sas_iounit_pg0->PhyData[0].ControllerDevHandle); + port_id = sas_iounit_pg0->PhyData[i].Port; + if (!(mpt3sas_get_port_by_id(ioc, port_id))) { + port = kzalloc(sizeof(struct hba_port), GFP_KERNEL); + if (!port) + goto out; + + port->port_id = port_id; + ioc_info(ioc, + "hba_port entry: %p, port: %d is added to hba_port list\n", + port, port->port_id); + if (ioc->shost_recovery) + port->flags = HBA_PORT_FLAG_NEW_PORT; + list_add_tail(&port->list, &ioc->port_table_list); + } ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i]. AttachedDevHandle); if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) link_rate = MPI2_SAS_NEG_LINK_RATE_1_5; + ioc->sas_hba.phy[i].port = mpt3sas_get_port_by_id(ioc, port_id); mpt3sas_transport_update_links(ioc, ioc->sas_hba.sas_address, attached_handle, i, link_rate); } @@ -5811,7 +5851,8 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc) u16 ioc_status; u16 sz; u8 device_missing_delay; - u8 num_phys; + u8 num_phys, port_id; + struct hba_port *port; mpt3sas_config_get_number_hba_phys(ioc, &num_phys); if (!num_phys) { @@ -5904,8 +5945,24 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc) if (i == 0) ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0-> PhyData[0].ControllerDevHandle); + + port_id = sas_iounit_pg0->PhyData[i].Port; + if (!(mpt3sas_get_port_by_id(ioc, port_id))) { + port = kzalloc(sizeof(struct hba_port), GFP_KERNEL); + if (!port) + goto out; + + port->port_id = port_id; + ioc_info(ioc, + "hba_port entry: %p, port: %d is added to hba_port list\n", + port, port->port_id); + list_add_tail(&port->list, + &ioc->port_table_list); + } + ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; ioc->sas_hba.phy[i].phy_id = i; + ioc->sas_hba.phy[i].port = mpt3sas_get_port_by_id(ioc, port_id); mpt3sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i], phy_pg0, ioc->sas_hba.parent_dev); } @@ -10160,6 +10217,7 @@ static void scsih_remove(struct pci_dev *pdev) struct workqueue_struct *wq; unsigned long flags; Mpi2ConfigReply_t mpi_reply; + struct hba_port *port, *port_next; if (_scsih_get_shost_and_ioc(pdev, &shost, &ioc)) return; @@ -10222,6 +10280,12 @@ static void scsih_remove(struct pci_dev *pdev) mpt3sas_port->remote_identify.sas_address); } + list_for_each_entry_safe(port, port_next, + &ioc->port_table_list, list) { + list_del(&port->list); + kfree(port); + } + /* free phys attached to the sas_host */ if (ioc->sas_hba.num_phys) { kfree(ioc->sas_hba.phy); @@ -11017,6 +11081,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) INIT_LIST_HEAD(&ioc->delayed_event_ack_list); INIT_LIST_HEAD(&ioc->delayed_tr_volume_list); INIT_LIST_HEAD(&ioc->reply_queue_list); + INIT_LIST_HEAD(&ioc->port_table_list); sprintf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id); -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 78ca700342a5df21d80515a36ba17c4962efb35b upstream. Rearrange _scsih_mark_responding_sas_device function. No functional change. Link: https://lore.kernel.org/r/20201027130847.9962-4-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 116 +++++++++++++-------------- 1 file changed, 58 insertions(+), 58 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 68ddeee8d0c7..aa932c8b231f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -8766,69 +8766,69 @@ Mpi2SasDevicePage0_t *sas_device_pg0) } spin_lock_irqsave(&ioc->sas_device_lock, flags); list_for_each_entry(sas_device, &ioc->sas_device_list, list) { - if ((sas_device->sas_address == le64_to_cpu( - sas_device_pg0->SASAddress)) && (sas_device->slot == - le16_to_cpu(sas_device_pg0->Slot))) { - sas_device->responding = 1; - starget = sas_device->starget; - if (starget && starget->hostdata) { - sas_target_priv_data = starget->hostdata; - sas_target_priv_data->tm_busy = 0; - sas_target_priv_data->deleted = 0; - } else - sas_target_priv_data = NULL; - if (starget) { - starget_printk(KERN_INFO, starget, - "handle(0x%04x), sas_addr(0x%016llx)\n", - le16_to_cpu(sas_device_pg0->DevHandle), - (unsigned long long) - sas_device->sas_address); + if (sas_device->sas_address != le64_to_cpu( + sas_device_pg0->SASAddress)) + continue; + if (sas_device->slot != le16_to_cpu(sas_device_pg0->Slot)) + continue; + sas_device->responding = 1; + starget = sas_device->starget; + if (starget && starget->hostdata) { + sas_target_priv_data = starget->hostdata; + sas_target_priv_data->tm_busy = 0; + sas_target_priv_data->deleted = 0; + } else + sas_target_priv_data = NULL; + if (starget) { + starget_printk(KERN_INFO, starget, + "handle(0x%04x), sas_addr(0x%016llx)\n", + le16_to_cpu(sas_device_pg0->DevHandle), + (unsigned long long) + sas_device->sas_address); - if (sas_device->enclosure_handle != 0) - starget_printk(KERN_INFO, starget, - "enclosure logical id(0x%016llx)," - " slot(%d)\n", - (unsigned long long) - sas_device->enclosure_logical_id, - sas_device->slot); - } - if (le16_to_cpu(sas_device_pg0->Flags) & - MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) { - sas_device->enclosure_level = - sas_device_pg0->EnclosureLevel; - memcpy(&sas_device->connector_name[0], - &sas_device_pg0->ConnectorName[0], 4); - } else { - sas_device->enclosure_level = 0; - sas_device->connector_name[0] = '\0'; - } + if (sas_device->enclosure_handle != 0) + starget_printk(KERN_INFO, starget, + "enclosure logical id(0x%016llx), slot(%d)\n", + (unsigned long long) + sas_device->enclosure_logical_id, + sas_device->slot); + } + if (le16_to_cpu(sas_device_pg0->Flags) & + MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) { + sas_device->enclosure_level = + sas_device_pg0->EnclosureLevel; + memcpy(&sas_device->connector_name[0], + &sas_device_pg0->ConnectorName[0], 4); + } else { + sas_device->enclosure_level = 0; + sas_device->connector_name[0] = '\0'; + } - sas_device->enclosure_handle = - le16_to_cpu(sas_device_pg0->EnclosureHandle); - sas_device->is_chassis_slot_valid = 0; - if (enclosure_dev) { - sas_device->enclosure_logical_id = le64_to_cpu( - enclosure_dev->pg0.EnclosureLogicalID); - if (le16_to_cpu(enclosure_dev->pg0.Flags) & - MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) { - sas_device->is_chassis_slot_valid = 1; - sas_device->chassis_slot = - enclosure_dev->pg0.ChassisSlot; - } + sas_device->enclosure_handle = + le16_to_cpu(sas_device_pg0->EnclosureHandle); + sas_device->is_chassis_slot_valid = 0; + if (enclosure_dev) { + sas_device->enclosure_logical_id = le64_to_cpu( + enclosure_dev->pg0.EnclosureLogicalID); + if (le16_to_cpu(enclosure_dev->pg0.Flags) & + MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID) { + sas_device->is_chassis_slot_valid = 1; + sas_device->chassis_slot = + enclosure_dev->pg0.ChassisSlot; } + } - if (sas_device->handle == le16_to_cpu( - sas_device_pg0->DevHandle)) - goto out; - pr_info("\thandle changed from(0x%04x)!!!\n", - sas_device->handle); - sas_device->handle = le16_to_cpu( - sas_device_pg0->DevHandle); - if (sas_target_priv_data) - sas_target_priv_data->handle = - le16_to_cpu(sas_device_pg0->DevHandle); + if (sas_device->handle == le16_to_cpu( + sas_device_pg0->DevHandle)) goto out; - } + pr_info("\thandle changed from(0x%04x)!!!\n", + sas_device->handle); + sas_device->handle = le16_to_cpu( + sas_device_pg0->DevHandle); + if (sas_target_priv_data) + sas_target_priv_data->handle = + le16_to_cpu(sas_device_pg0->DevHandle); + goto out; } out: spin_unlock_irqrestore(&ioc->sas_device_lock, flags); -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit e2f0cdf7525353d87ed4f51ea69ca7986070ddd5 upstream. Update hba_port's sas_address & phy_mask fields whenever a direct expander or sas/sata target devices are added or removed. When any direct attached device is discovered then driver: - Gets the hba_port object corresponding to device's PhysicalPort number; - Updates the hba_port's sas_address field with device's SAS Address; - Updates the hba_port's phy_mask filed with device's narrow/wide port Phy number bits; - If a sas/sata end device (not only direct-attached devices) is added then corresponding sas_device object's port variable is assigned with hba_port object's address whose port_id matches the device's PhysicalPort number. - If an expander device is added then corresponding sas_expander object's port variable is assigned with hba_port object's address whose port_id matches the expander device's PhysicalPort number. When any direct attached device is detached then driver will delete the hba_port object corresponding to device's PhysicalPort number. Whenever any HBA phy's link (of direct attached device's port) comes up then update the phy_mask field of corresponding hba_port object. Link: https://lore.kernel.org/r/20201027130847.9962-5-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 7 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 81 ++++++++++++++++++------ drivers/scsi/mpt3sas/mpt3sas_transport.c | 65 +++++++++++++++++-- 3 files changed, 126 insertions(+), 27 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 9a3429b1e7ce..0589fd49ac67 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1796,16 +1796,17 @@ extern struct scsi_transport_template *mpt3sas_transport_template; u8 mpt3sas_transport_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); struct _sas_port *mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, - u16 handle, u64 sas_address); + u16 handle, u64 sas_address, struct hba_port *port); void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, - u64 sas_address_parent); + u64 sas_address_parent, struct hba_port *port); int mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy *mpt3sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev); int mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy *mpt3sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev); void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address, u16 handle, u8 phy_number, u8 link_rate); + u64 sas_address, u16 handle, u8 phy_number, u8 link_rate, + struct hba_port *port); extern struct sas_function_template mpt3sas_transport_functions; extern struct scsi_transport_template *mpt3sas_transport_template; /* trigger data externs */ diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index aa932c8b231f..ab74fa710205 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -908,7 +908,7 @@ _scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc, } if (!mpt3sas_transport_port_add(ioc, sas_device->handle, - sas_device->sas_address_parent)) { + sas_device->sas_address_parent, sas_device->port)) { _scsih_sas_device_remove(ioc, sas_device); } else if (!sas_device->starget) { /* @@ -919,7 +919,8 @@ _scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc, if (!ioc->is_driver_loading) { mpt3sas_transport_port_remove(ioc, sas_device->sas_address, - sas_device->sas_address_parent); + sas_device->sas_address_parent, + sas_device->port); _scsih_sas_device_remove(ioc, sas_device); } } else @@ -1768,6 +1769,7 @@ scsih_target_alloc(struct scsi_target *starget) if (pcie_device) { sas_target_priv_data->handle = pcie_device->handle; sas_target_priv_data->sas_address = pcie_device->wwid; + sas_target_priv_data->port = NULL; sas_target_priv_data->pcie_dev = pcie_device; pcie_device->starget = starget; pcie_device->id = starget->id; @@ -1791,6 +1793,7 @@ scsih_target_alloc(struct scsi_target *starget) if (sas_device) { sas_target_priv_data->handle = sas_device->handle; sas_target_priv_data->sas_address = sas_device->sas_address; + sas_target_priv_data->port = sas_device->port; sas_target_priv_data->sas_dev = sas_device; sas_device->starget = starget; sas_device->id = starget->id; @@ -5826,7 +5829,8 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) link_rate = MPI2_SAS_NEG_LINK_RATE_1_5; ioc->sas_hba.phy[i].port = mpt3sas_get_port_by_id(ioc, port_id); mpt3sas_transport_update_links(ioc, ioc->sas_hba.sas_address, - attached_handle, i, link_rate); + attached_handle, i, link_rate, + ioc->sas_hba.phy[i].port); } out: kfree(sas_iounit_pg0); @@ -6016,6 +6020,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) int i; unsigned long flags; struct _sas_port *mpt3sas_port = NULL; + u8 port_id; int rc = 0; @@ -6048,6 +6053,8 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) __FILE__, __LINE__, __func__); return -1; } + + port_id = expander_pg0.PhysicalPort; if (sas_address_parent != ioc->sas_hba.sas_address) { spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc, @@ -6081,6 +6088,13 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) sas_expander->num_phys = expander_pg0.NumPhys; sas_expander->sas_address_parent = sas_address_parent; sas_expander->sas_address = sas_address; + sas_expander->port = mpt3sas_get_port_by_id(ioc, port_id); + if (!sas_expander->port) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } ioc_info(ioc, "expander_add: handle(0x%04x), parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", handle, parent_handle, @@ -6101,7 +6115,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) INIT_LIST_HEAD(&sas_expander->sas_port_list); mpt3sas_port = mpt3sas_transport_port_add(ioc, handle, - sas_address_parent); + sas_address_parent, sas_expander->port); if (!mpt3sas_port) { ioc_err(ioc, "failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); @@ -6120,6 +6134,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) } sas_expander->phy[i].handle = handle; sas_expander->phy[i].phy_id = i; + sas_expander->phy[i].port = mpt3sas_get_port_by_id(ioc, port_id); if ((mpt3sas_transport_add_expander_phy(ioc, &sas_expander->phy[i], expander_pg1, @@ -6147,7 +6162,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) if (mpt3sas_port) mpt3sas_transport_port_remove(ioc, sas_expander->sas_address, - sas_address_parent); + sas_address_parent, sas_expander->port); kfree(sas_expander); return rc; } @@ -6412,6 +6427,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u32 ioc_status; u64 sas_address; u32 device_info; + u8 port_id; if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { @@ -6448,6 +6464,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num, sas_device_pg0.AccessStatus)) return -1; + port_id = sas_device_pg0.PhysicalPort; sas_device = mpt3sas_get_sdev_by_addr(ioc, sas_address); if (sas_device) { @@ -6490,6 +6507,12 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num, sas_device->phy = sas_device_pg0.PhyNum; sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) & MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0; + sas_device->port = mpt3sas_get_port_by_id(ioc, port_id); + if (!sas_device->port) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } if (le16_to_cpu(sas_device_pg0.Flags) & MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) { @@ -6523,6 +6546,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num, else _scsih_sas_device_add(ioc, sas_device); +out: sas_device_put(sas_device); return 0; } @@ -6563,7 +6587,8 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc, if (!ioc->hide_drives) mpt3sas_transport_port_remove(ioc, sas_device->sas_address, - sas_device->sas_address_parent); + sas_device->sas_address_parent, + sas_device->port); ioc_info(ioc, "removing handle(0x%04x), sas_addr(0x%016llx)\n", sas_device->handle, (u64)sas_device->sas_address); @@ -6674,6 +6699,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc, u64 sas_address; unsigned long flags; u8 link_rate, prev_link_rate; + struct hba_port *port; Mpi2EventDataSasTopologyChangeList_t *event_data = (Mpi2EventDataSasTopologyChangeList_t *) fw_event->event_data; @@ -6695,6 +6721,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc, } parent_handle = le16_to_cpu(event_data->ExpanderDevHandle); + port = mpt3sas_get_port_by_id(ioc, event_data->PhysicalPort); /* handle expander add */ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED) @@ -6707,6 +6734,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc, if (sas_expander) { sas_address = sas_expander->sas_address; max_phys = sas_expander->num_phys; + port = sas_expander->port; } else if (parent_handle < ioc->sas_hba.num_phys) { sas_address = ioc->sas_hba.sas_address; max_phys = ioc->sas_hba.num_phys; @@ -6749,7 +6777,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc, break; mpt3sas_transport_update_links(ioc, sas_address, - handle, phy_number, link_rate); + handle, phy_number, link_rate, port); if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) break; @@ -6768,7 +6796,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc, break; mpt3sas_transport_update_links(ioc, sas_address, - handle, phy_number, link_rate); + handle, phy_number, link_rate, port); _scsih_add_device(ioc, handle, phy_number, 0); @@ -8324,7 +8352,8 @@ _scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc, parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) mpt3sas_transport_update_links(ioc, sas_address, handle, - sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); + sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5, + mpt3sas_get_port_by_id(ioc, sas_device_pg0.PhysicalPort)); _scsih_ir_fastpath(ioc, handle, element->PhysDiskNum); _scsih_add_device(ioc, handle, 0, 1); @@ -8630,7 +8659,9 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc, parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) mpt3sas_transport_update_links(ioc, sas_address, handle, - sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); + sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5, + mpt3sas_get_port_by_id(ioc, + sas_device_pg0.PhysicalPort)); _scsih_add_device(ioc, handle, 0, 1); @@ -9369,7 +9400,8 @@ _scsih_refresh_expander_links(struct MPT3SAS_ADAPTER *ioc, mpt3sas_transport_update_links(ioc, sas_expander->sas_address, le16_to_cpu(expander_pg1.AttachedDevHandle), i, - expander_pg1.NegotiatedLinkRate >> 4); + expander_pg1.NegotiatedLinkRate >> 4, + sas_expander->port); } } @@ -9388,7 +9420,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) Mpi2RaidPhysDiskPage0_t pd_pg0; Mpi2EventIrConfigElement_t element; Mpi2ConfigReply_t mpi_reply; - u8 phys_disk_num; + u8 phys_disk_num, port_id; u16 ioc_status; u16 handle, parent_handle; u64 sas_address; @@ -9478,9 +9510,11 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "\tBEFORE adding phys disk: handle (0x%04x), sas_addr(0x%016llx)\n", handle, (u64)le64_to_cpu(sas_device_pg0.SASAddress)); + port_id = sas_device_pg0.PhysicalPort; mpt3sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, - MPI2_SAS_NEG_LINK_RATE_1_5); + MPI2_SAS_NEG_LINK_RATE_1_5, + mpt3sas_get_port_by_id(ioc, port_id)); set_bit(handle, ioc->pd_handles); retry_count = 0; /* This will retry adding the end device. @@ -9566,6 +9600,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) if (!(_scsih_is_end_device( le32_to_cpu(sas_device_pg0.DeviceInfo)))) continue; + port_id = sas_device_pg0.PhysicalPort; sas_device = mpt3sas_get_sdev_by_addr(ioc, le64_to_cpu(sas_device_pg0.SASAddress)); if (sas_device) { @@ -9578,7 +9613,8 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) handle, (u64)le64_to_cpu(sas_device_pg0.SASAddress)); mpt3sas_transport_update_links(ioc, sas_address, handle, - sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); + sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5, + mpt3sas_get_port_by_id(ioc, port_id)); retry_count = 0; /* This will retry adding the end device. * _scsih_add_device() will decide on retries and @@ -10021,7 +10057,7 @@ _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc, } mpt3sas_transport_port_remove(ioc, sas_expander->sas_address, - sas_expander->sas_address_parent); + sas_expander->sas_address_parent, sas_expander->port); ioc_info(ioc, "expander_remove: handle(0x%04x), sas_addr(0x%016llx)\n", sas_expander->handle, (unsigned long long) @@ -10371,6 +10407,7 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc) unsigned long flags; int rc; int tid; + struct hba_port *port; /* no Bios, return immediately */ if (!ioc->bios_pg3.BiosVersion) @@ -10412,19 +10449,24 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc) handle = sas_device->handle; sas_address_parent = sas_device->sas_address_parent; sas_address = sas_device->sas_address; + port = sas_device->port; list_move_tail(&sas_device->list, &ioc->sas_device_list); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (ioc->hide_drives) return; + + if (!port) + return; + if (!mpt3sas_transport_port_add(ioc, handle, - sas_address_parent)) { + sas_address_parent, port)) { _scsih_sas_device_remove(ioc, sas_device); } else if (!sas_device->starget) { if (!ioc->is_driver_loading) { mpt3sas_transport_port_remove(ioc, sas_address, - sas_address_parent); + sas_address_parent, port); _scsih_sas_device_remove(ioc, sas_device); } } @@ -10512,7 +10554,7 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc) while ((sas_device = get_next_sas_device(ioc))) { if (!mpt3sas_transport_port_add(ioc, sas_device->handle, - sas_device->sas_address_parent)) { + sas_device->sas_address_parent, sas_device->port)) { _scsih_sas_device_remove(ioc, sas_device); sas_device_put(sas_device); continue; @@ -10526,7 +10568,8 @@ _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc) if (!ioc->is_driver_loading) { mpt3sas_transport_port_remove(ioc, sas_device->sas_address, - sas_device->sas_address_parent); + sas_device->sas_address_parent, + sas_device->port); _scsih_sas_device_remove(ioc, sas_device); sas_device_put(sas_device); continue; diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 6ec5b7f33dfd..aab3b1451e31 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -594,6 +594,7 @@ _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, * @ioc: per adapter object * @handle: handle of attached device * @sas_address: sas address of parent expander or sas host + * @port: hba port entry * Context: This function will acquire ioc->sas_node_lock. * * Adding new port object to the sas_node->sas_port_list. @@ -602,7 +603,7 @@ _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, */ struct _sas_port * mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, - u64 sas_address) + u64 sas_address, struct hba_port *hba_port) { struct _sas_phy *mpt3sas_phy, *next; struct _sas_port *mpt3sas_port; @@ -613,6 +614,12 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, int i; struct sas_port *port; + if (!hba_port) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return NULL; + } + mpt3sas_port = kzalloc(sizeof(struct _sas_port), GFP_KERNEL); if (!mpt3sas_port) { @@ -646,6 +653,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, goto out_fail; } + mpt3sas_port->hba_port = hba_port; _transport_sanity_check(ioc, sas_node, mpt3sas_port->remote_identify.sas_address); @@ -653,8 +661,12 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, if (sas_node->phy[i].remote_identify.sas_address != mpt3sas_port->remote_identify.sas_address) continue; + if (sas_node->phy[i].port != hba_port) + continue; list_add_tail(&sas_node->phy[i].port_siblings, &mpt3sas_port->phy_list); + if (sas_node->handle <= ioc->sas_hba.num_phys) + hba_port->phy_mask |= (1 << i); mpt3sas_port->num_phys++; } @@ -686,14 +698,21 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, mpt3sas_phy->phy_id); sas_port_add_phy(port, mpt3sas_phy->phy); mpt3sas_phy->phy_belongs_to_port = 1; + mpt3sas_phy->port = hba_port; } mpt3sas_port->port = port; - if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) + if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { rphy = sas_end_device_alloc(port); - else + if (sas_node->handle <= ioc->sas_hba.num_phys) + hba_port->sas_address = sas_device->sas_address; + } else { rphy = sas_expander_alloc(port, mpt3sas_port->remote_identify.device_type); + if (sas_node->handle <= ioc->sas_hba.num_phys) + hba_port->sas_address = + mpt3sas_port->remote_identify.sas_address; + } rphy->identify = mpt3sas_port->remote_identify; @@ -751,6 +770,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, * @ioc: per adapter object * @sas_address: sas address of attached device * @sas_address_parent: sas address of parent expander or sas host + * @port: hba port entry * Context: This function will acquire ioc->sas_node_lock. * * Removing object and freeing associated memory from the @@ -758,7 +778,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, */ void mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, - u64 sas_address_parent) + u64 sas_address_parent, struct hba_port *port) { int i; unsigned long flags; @@ -766,6 +786,10 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, struct _sas_node *sas_node; u8 found = 0; struct _sas_phy *mpt3sas_phy, *next_phy; + struct hba_port *hba_port_next, *hba_port = NULL; + + if (!port) + return; spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_node = _transport_sas_node_find_by_sas_address(ioc, @@ -778,6 +802,8 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, port_list) { if (mpt3sas_port->remote_identify.sas_address != sas_address) continue; + if (mpt3sas_port->hba_port != port) + continue; found = 1; list_del(&mpt3sas_port->port_list); goto out; @@ -788,6 +814,21 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, return; } + if (sas_node->handle <= ioc->sas_hba.num_phys) { + list_for_each_entry_safe(hba_port, hba_port_next, + &ioc->port_table_list, list) { + if (hba_port != port) + continue; + if (hba_port->sas_address != sas_address) + continue; + ioc_info(ioc, + "remove hba_port entry: %p port: %d from hba_port list\n", + hba_port, hba_port->port_id); + list_del(&hba_port->list); + kfree(hba_port); + } + } + for (i = 0; i < sas_node->num_phys; i++) { if (sas_node->phy[i].remote_identify.sas_address == sas_address) memset(&sas_node->phy[i].remote_identify, 0 , @@ -961,14 +1002,19 @@ mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy * @handle: attached device handle * @phy_number: phy number * @link_rate: new link rate + * @port: hba port entry + * + * Return nothing. */ void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address, u16 handle, u8 phy_number, u8 link_rate) + u64 sas_address, u16 handle, u8 phy_number, u8 link_rate, + struct hba_port *port) { unsigned long flags; struct _sas_node *sas_node; struct _sas_phy *mpt3sas_phy; + struct hba_port *hba_port = NULL; if (ioc->shost_recovery || ioc->pci_error_recovery) return; @@ -988,6 +1034,15 @@ mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, &mpt3sas_phy->remote_identify); _transport_add_phy_to_an_existing_port(ioc, sas_node, mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address); + if (sas_node->handle <= ioc->sas_hba.num_phys) { + list_for_each_entry(hba_port, + &ioc->port_table_list, list) { + if (hba_port->sas_address == sas_address && + hba_port == port) + hba_port->phy_mask |= + (1 << mpt3sas_phy->phy_id); + } + } } else memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct sas_identify)); -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 7d310f241001e090cf1ec0f3ae836b38d8c6ebec upstream. Currently driver retrieves the sas_device/sas_expander objects from corresponding object's lists using just device's SAS Address. Make driver retrieve the objects from the corresponding objects list using device's SAS Address and PhysicalPort (or PortID) number. PhysicalPort number is the port number of the HBA through which this device is accessed. Link: https://lore.kernel.org/r/20201027130847.9962-6-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 16 ++- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 175 ++++++++++++++++------- drivers/scsi/mpt3sas/mpt3sas_transport.c | 74 ++++++---- 3 files changed, 178 insertions(+), 87 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 0589fd49ac67..c9a90a64510d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1656,20 +1656,26 @@ int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, void mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); void mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle); -void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address); +void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + struct hba_port *port); void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address); + u64 sas_address, struct hba_port *port); u8 mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc, u16 smid); +struct hba_port * +mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port); struct _sas_node *mpt3sas_scsih_expander_find_by_handle( struct MPT3SAS_ADAPTER *ioc, u16 handle); struct _sas_node *mpt3sas_scsih_expander_find_by_sas_address( - struct MPT3SAS_ADAPTER *ioc, u64 sas_address); + struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + struct hba_port *port); struct _sas_device *mpt3sas_get_sdev_by_addr( - struct MPT3SAS_ADAPTER *ioc, u64 sas_address); + struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + struct hba_port *port); struct _sas_device *__mpt3sas_get_sdev_by_addr( - struct MPT3SAS_ADAPTER *ioc, u64 sas_address); + struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + struct hba_port *port); struct _sas_device *mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle); struct _pcie_device *mpt3sas_get_pdev_by_handle(struct MPT3SAS_ADAPTER *ioc, diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index ab74fa710205..610f233bc37c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -638,48 +638,67 @@ mpt3sas_get_pdev_from_target(struct MPT3SAS_ADAPTER *ioc, return ret; } +/** + * mpt3sas_get_sdev_by_addr - get _sas_device object corresponding to provided + * sas address from sas_device_list list + * @ioc: per adapter object + * @port: port number + * + * Search for _sas_device object corresponding to provided sas address, + * if available return _sas_device object address otherwise return NULL. + */ struct _sas_device * __mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address) + u64 sas_address, struct hba_port *port) { struct _sas_device *sas_device; + if (!port) + return NULL; + assert_spin_locked(&ioc->sas_device_lock); - list_for_each_entry(sas_device, &ioc->sas_device_list, list) - if (sas_device->sas_address == sas_address) - goto found_device; + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->sas_address != sas_address) + continue; + if (sas_device->port != port) + continue; + sas_device_get(sas_device); + return sas_device; + } - list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) - if (sas_device->sas_address == sas_address) - goto found_device; + list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) { + if (sas_device->sas_address != sas_address) + continue; + if (sas_device->port != port) + continue; + sas_device_get(sas_device); + return sas_device; + } return NULL; - -found_device: - sas_device_get(sas_device); - return sas_device; } /** * mpt3sas_get_sdev_by_addr - sas device search * @ioc: per adapter object * @sas_address: sas address + * @port: hba port entry * Context: Calling function should acquire ioc->sas_device_lock * - * This searches for sas_device based on sas_address, then return sas_device - * object. + * This searches for sas_device based on sas_address & port number, + * then return sas_device object. */ struct _sas_device * mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address) + u64 sas_address, struct hba_port *port) { struct _sas_device *sas_device; unsigned long flags; spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = __mpt3sas_get_sdev_by_addr(ioc, - sas_address); + sas_address, port); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); return sas_device; @@ -848,13 +867,17 @@ _scsih_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle) } /** - * mpt3sas_device_remove_by_sas_address - removing device object by sas address + * mpt3sas_device_remove_by_sas_address - removing device object by + * sas address & port number * @ioc: per adapter object * @sas_address: device sas_address + * @port: hba port entry + * + * Return nothing. */ void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address) + u64 sas_address, struct hba_port *port) { struct _sas_device *sas_device; unsigned long flags; @@ -863,7 +886,7 @@ mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc, return; spin_lock_irqsave(&ioc->sas_device_lock, flags); - sas_device = __mpt3sas_get_sdev_by_addr(ioc, sas_address); + sas_device = __mpt3sas_get_sdev_by_addr(ioc, sas_address, port); if (sas_device) { list_del_init(&sas_device->list); sas_device_put(sas_device); @@ -1457,21 +1480,26 @@ mpt3sas_scsih_enclosure_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle) * mpt3sas_scsih_expander_find_by_sas_address - expander device search * @ioc: per adapter object * @sas_address: sas address + * @port: hba port entry * Context: Calling function should acquire ioc->sas_node_lock. * - * This searches for expander device based on sas_address, then returns the - * sas_node object. + * This searches for expander device based on sas_address & port number, + * then returns the sas_node object. */ struct _sas_node * mpt3sas_scsih_expander_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address) + u64 sas_address, struct hba_port *port) { - struct _sas_node *sas_expander, *r; + struct _sas_node *sas_expander, *r = NULL; + + if (!port) + return r; - r = NULL; list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { if (sas_expander->sas_address != sas_address) continue; + if (sas_expander->port != port) + continue; r = sas_expander; goto out; } @@ -1788,7 +1816,7 @@ scsih_target_alloc(struct scsi_target *starget) spin_lock_irqsave(&ioc->sas_device_lock, flags); rphy = dev_to_rphy(starget->dev.parent); sas_device = __mpt3sas_get_sdev_by_addr(ioc, - rphy->identify.sas_address); + rphy->identify.sas_address, NULL); if (sas_device) { sas_target_priv_data->handle = sas_device->handle; @@ -1949,7 +1977,8 @@ scsih_slave_alloc(struct scsi_device *sdev) } else if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) { spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = __mpt3sas_get_sdev_by_addr(ioc, - sas_target_priv_data->sas_address); + sas_target_priv_data->sas_address, + sas_target_priv_data->port); if (sas_device && (sas_device->starget == NULL)) { sdev_printk(KERN_INFO, sdev, "%s : sas_device->starget set to starget @ %d\n", @@ -2554,7 +2583,8 @@ scsih_slave_configure(struct scsi_device *sdev) spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = __mpt3sas_get_sdev_by_addr(ioc, - sas_device_priv_data->sas_target->sas_address); + sas_device_priv_data->sas_target->sas_address, + sas_device_priv_data->sas_target->port); if (!sas_device) { spin_unlock_irqrestore(&ioc->sas_device_lock, flags); dfailprintk(ioc, @@ -3691,11 +3721,13 @@ _scsih_ublock_io_all_device(struct MPT3SAS_ADAPTER *ioc) * _scsih_ublock_io_device - prepare device to be deleted * @ioc: per adapter object * @sas_address: sas address + * @port: hba port entry * * unblock then put device in offline state */ static void -_scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address) +_scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, + u64 sas_address, struct hba_port *port) { struct MPT3SAS_DEVICE *sas_device_priv_data; struct scsi_device *sdev; @@ -3707,6 +3739,8 @@ _scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address) if (sas_device_priv_data->sas_target->sas_address != sas_address) continue; + if (sas_device_priv_data->sas_target->port != port) + continue; if (sas_device_priv_data->block) _scsih_internal_device_unblock(sdev, sas_device_priv_data); @@ -3807,7 +3841,8 @@ _scsih_block_io_to_children_attached_to_ex(struct MPT3SAS_ADAPTER *ioc, SAS_END_DEVICE) { spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = __mpt3sas_get_sdev_by_addr(ioc, - mpt3sas_port->remote_identify.sas_address); + mpt3sas_port->remote_identify.sas_address, + mpt3sas_port->hba_port); if (sas_device) { set_bit(sas_device->handle, ioc->blocking_handles); @@ -3826,7 +3861,8 @@ _scsih_block_io_to_children_attached_to_ex(struct MPT3SAS_ADAPTER *ioc, SAS_FANOUT_EXPANDER_DEVICE) { expander_sibling = mpt3sas_scsih_expander_find_by_sas_address( - ioc, mpt3sas_port->remote_identify.sas_address); + ioc, mpt3sas_port->remote_identify.sas_address, + mpt3sas_port->hba_port); _scsih_block_io_to_children_attached_to_ex(ioc, expander_sibling); } @@ -3915,6 +3951,7 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle) struct _tr_list *delayed_tr; u32 ioc_state; u8 tr_method = 0; + struct hba_port *port = NULL; if (ioc->pci_error_recovery) { dewtprintk(ioc, @@ -3943,6 +3980,7 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle) sas_target_priv_data = sas_device->starget->hostdata; sas_target_priv_data->deleted = 1; sas_address = sas_device->sas_address; + port = sas_device->port; } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (!sas_device) { @@ -3990,7 +4028,7 @@ _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle) pcie_device->enclosure_level, pcie_device->connector_name)); } - _scsih_ublock_io_device(ioc, sas_address); + _scsih_ublock_io_device(ioc, sas_address, port); sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE; } @@ -6058,7 +6096,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) if (sas_address_parent != ioc->sas_hba.sas_address) { spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc, - sas_address_parent); + sas_address_parent, mpt3sas_get_port_by_id(ioc, port_id)); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (!sas_expander) { rc = _scsih_expander_add(ioc, parent_handle); @@ -6070,7 +6108,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_address = le64_to_cpu(expander_pg0.SASAddress); sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc, - sas_address); + sas_address, mpt3sas_get_port_by_id(ioc, port_id)); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (sas_expander) @@ -6173,7 +6211,8 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) * @sas_address: expander sas_address */ void -mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address) +mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, + struct hba_port *port) { struct _sas_node *sas_expander; unsigned long flags; @@ -6181,9 +6220,12 @@ mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address) if (ioc->shost_recovery) return; + if (!port) + return; + spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc, - sas_address); + sas_address, port); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (sas_expander) _scsih_expander_node_remove(ioc, sas_expander); @@ -6306,7 +6348,7 @@ _scsih_check_device(struct MPT3SAS_ADAPTER *ioc, { Mpi2ConfigReply_t mpi_reply; Mpi2SasDevicePage0_t sas_device_pg0; - struct _sas_device *sas_device; + struct _sas_device *sas_device = NULL; struct _enclosure_node *enclosure_dev = NULL; u32 ioc_status; unsigned long flags; @@ -6314,6 +6356,7 @@ _scsih_check_device(struct MPT3SAS_ADAPTER *ioc, struct scsi_target *starget; struct MPT3SAS_TARGET *sas_target_priv_data; u32 device_info; + struct hba_port *port; if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) @@ -6336,8 +6379,11 @@ _scsih_check_device(struct MPT3SAS_ADAPTER *ioc, spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + port = mpt3sas_get_port_by_id(ioc, sas_device_pg0.PhysicalPort); + if (!port) + goto out_unlock; sas_device = __mpt3sas_get_sdev_by_addr(ioc, - sas_address); + sas_address, port); if (!sas_device) goto out_unlock; @@ -6393,7 +6439,7 @@ _scsih_check_device(struct MPT3SAS_ADAPTER *ioc, goto out_unlock; spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - _scsih_ublock_io_device(ioc, sas_address); + _scsih_ublock_io_device(ioc, sas_address, port); if (sas_device) sas_device_put(sas_device); @@ -6466,7 +6512,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num, port_id = sas_device_pg0.PhysicalPort; sas_device = mpt3sas_get_sdev_by_addr(ioc, - sas_address); + sas_address, mpt3sas_get_port_by_id(ioc, port_id)); if (sas_device) { clear_bit(handle, ioc->pend_os_device_add); sas_device_put(sas_device); @@ -6579,7 +6625,8 @@ _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc, if (sas_device->starget && sas_device->starget->hostdata) { sas_target_priv_data = sas_device->starget->hostdata; sas_target_priv_data->deleted = 1; - _scsih_ublock_io_device(ioc, sas_device->sas_address); + _scsih_ublock_io_device(ioc, sas_device->sas_address, + sas_device->port); sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE; } @@ -6811,7 +6858,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc, /* handle expander removal */ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING && sas_expander) - mpt3sas_expander_remove(ioc, sas_address); + mpt3sas_expander_remove(ioc, sas_address, port); return 0; } @@ -6912,7 +6959,7 @@ _scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc, spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_address = le64_to_cpu(event_data->SASAddress); sas_device = __mpt3sas_get_sdev_by_addr(ioc, - sas_address); + sas_address, mpt3sas_get_port_by_id(ioc, event_data->PhysicalPort)); if (!sas_device || !sas_device->starget) goto out; @@ -7061,7 +7108,7 @@ _scsih_pcie_device_remove_from_sml(struct MPT3SAS_ADAPTER *ioc, if (pcie_device->starget && pcie_device->starget->hostdata) { sas_target_priv_data = pcie_device->starget->hostdata; sas_target_priv_data->deleted = 1; - _scsih_ublock_io_device(ioc, pcie_device->wwid); + _scsih_ublock_io_device(ioc, pcie_device->wwid, NULL); sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE; } @@ -7183,7 +7230,7 @@ _scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle) spin_unlock_irqrestore(&ioc->pcie_device_lock, flags); pcie_device_put(pcie_device); - _scsih_ublock_io_device(ioc, wwid); + _scsih_ublock_io_device(ioc, wwid, NULL); return; } @@ -8786,6 +8833,8 @@ Mpi2SasDevicePage0_t *sas_device_pg0) struct _sas_device *sas_device = NULL; struct _enclosure_node *enclosure_dev = NULL; unsigned long flags; + struct hba_port *port = mpt3sas_get_port_by_id( + ioc, sas_device_pg0->PhysicalPort); if (sas_device_pg0->EnclosureHandle) { enclosure_dev = @@ -8802,6 +8851,8 @@ Mpi2SasDevicePage0_t *sas_device_pg0) continue; if (sas_device->slot != le16_to_cpu(sas_device_pg0->Slot)) continue; + if (sas_device->port != port) + continue; sas_device->responding = 1; starget = sas_device->starget; if (starget && starget->hostdata) { @@ -9210,6 +9261,8 @@ _scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc, u16 handle = le16_to_cpu(expander_pg0->DevHandle); u16 enclosure_handle = le16_to_cpu(expander_pg0->EnclosureHandle); u64 sas_address = le64_to_cpu(expander_pg0->SASAddress); + struct hba_port *port = mpt3sas_get_port_by_id( + ioc, expander_pg0->PhysicalPort); if (enclosure_handle) enclosure_dev = @@ -9220,6 +9273,8 @@ _scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc, list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { if (sas_expander->sas_address != sas_address) continue; + if (sas_expander->port != port) + continue; sas_expander->responding = 1; if (enclosure_dev) { @@ -9276,9 +9331,10 @@ _scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc) handle = le16_to_cpu(expander_pg0.DevHandle); sas_address = le64_to_cpu(expander_pg0.SASAddress); - pr_info("\texpander present: handle(0x%04x), sas_addr(0x%016llx)\n", - handle, - (unsigned long long)sas_address); + pr_info( + "\texpander present: handle(0x%04x), sas_addr(0x%016llx), port:%d\n", + handle, (unsigned long long)sas_address, + expander_pg0.PhysicalPort); _scsih_mark_responding_expander(ioc, &expander_pg0); } @@ -9450,8 +9506,10 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) } handle = le16_to_cpu(expander_pg0.DevHandle); spin_lock_irqsave(&ioc->sas_node_lock, flags); + port_id = expander_pg0.PhysicalPort; expander_device = mpt3sas_scsih_expander_find_by_sas_address( - ioc, le64_to_cpu(expander_pg0.SASAddress)); + ioc, le64_to_cpu(expander_pg0.SASAddress), + mpt3sas_get_port_by_id(ioc, port_id)); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (expander_device) _scsih_refresh_expander_links(ioc, expander_device, @@ -9602,7 +9660,8 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) continue; port_id = sas_device_pg0.PhysicalPort; sas_device = mpt3sas_get_sdev_by_addr(ioc, - le64_to_cpu(sas_device_pg0.SASAddress)); + le64_to_cpu(sas_device_pg0.SASAddress), + mpt3sas_get_port_by_id(ioc, port_id)); if (sas_device) { sas_device_put(sas_device); continue; @@ -10047,21 +10106,25 @@ _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc, if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) mpt3sas_device_remove_by_sas_address(ioc, - mpt3sas_port->remote_identify.sas_address); + mpt3sas_port->remote_identify.sas_address, + mpt3sas_port->hba_port); else if (mpt3sas_port->remote_identify.device_type == SAS_EDGE_EXPANDER_DEVICE || mpt3sas_port->remote_identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) mpt3sas_expander_remove(ioc, - mpt3sas_port->remote_identify.sas_address); + mpt3sas_port->remote_identify.sas_address, + mpt3sas_port->hba_port); } mpt3sas_transport_port_remove(ioc, sas_expander->sas_address, sas_expander->sas_address_parent, sas_expander->port); - ioc_info(ioc, "expander_remove: handle(0x%04x), sas_addr(0x%016llx)\n", - sas_expander->handle, (unsigned long long) - sas_expander->sas_address); + ioc_info(ioc, + "expander_remove: handle(0x%04x), sas_addr(0x%016llx), port:%d\n", + sas_expander->handle, (unsigned long long) + sas_expander->sas_address, + sas_expander->port->port_id); spin_lock_irqsave(&ioc->sas_node_lock, flags); list_del(&sas_expander->list); @@ -10307,13 +10370,15 @@ static void scsih_remove(struct pci_dev *pdev) if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) mpt3sas_device_remove_by_sas_address(ioc, - mpt3sas_port->remote_identify.sas_address); + mpt3sas_port->remote_identify.sas_address, + mpt3sas_port->hba_port); else if (mpt3sas_port->remote_identify.device_type == SAS_EDGE_EXPANDER_DEVICE || mpt3sas_port->remote_identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) mpt3sas_expander_remove(ioc, - mpt3sas_port->remote_identify.sas_address); + mpt3sas_port->remote_identify.sas_address, + mpt3sas_port->hba_port); } list_for_each_entry_safe(port, port_next, diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index aab3b1451e31..54c004e96170 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -64,6 +64,7 @@ * _transport_sas_node_find_by_sas_address - sas node search * @ioc: per adapter object * @sas_address: sas address of expander or sas host + * @port: hba port entry * Context: Calling function should acquire ioc->sas_node_lock. * * Search for either hba phys or expander device based on handle, then returns @@ -71,13 +72,13 @@ */ static struct _sas_node * _transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address) + u64 sas_address, struct hba_port *port) { if (ioc->sas_hba.sas_address == sas_address) return &ioc->sas_hba; else return mpt3sas_scsih_expander_find_by_sas_address(ioc, - sas_address); + sas_address, port); } /** @@ -439,6 +440,7 @@ _transport_delete_port(struct MPT3SAS_ADAPTER *ioc, struct _sas_port *mpt3sas_port) { u64 sas_address = mpt3sas_port->remote_identify.sas_address; + struct hba_port *port = mpt3sas_port->hba_port; enum sas_device_type device_type = mpt3sas_port->remote_identify.device_type; @@ -448,10 +450,11 @@ _transport_delete_port(struct MPT3SAS_ADAPTER *ioc, ioc->logging_level |= MPT_DEBUG_TRANSPORT; if (device_type == SAS_END_DEVICE) - mpt3sas_device_remove_by_sas_address(ioc, sas_address); + mpt3sas_device_remove_by_sas_address(ioc, + sas_address, port); else if (device_type == SAS_EDGE_EXPANDER_DEVICE || device_type == SAS_FANOUT_EXPANDER_DEVICE) - mpt3sas_expander_remove(ioc, sas_address); + mpt3sas_expander_remove(ioc, sas_address, port); ioc->logging_level &= ~MPT_DEBUG_TRANSPORT; } @@ -571,18 +574,21 @@ _transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, * @ioc: per adapter object * @sas_node: sas node object (either expander or sas host) * @sas_address: sas address of device being added + * @port: hba port entry * * See the explanation above from _transport_delete_duplicate_port */ static void _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, - u64 sas_address) + u64 sas_address, struct hba_port *port) { int i; for (i = 0; i < sas_node->num_phys; i++) { if (sas_node->phy[i].remote_identify.sas_address != sas_address) continue; + if (sas_node->phy[i].port != port) + continue; if (sas_node->phy[i].phy_belongs_to_port == 1) _transport_del_phy_from_an_existing_port(ioc, sas_node, &sas_node->phy[i]); @@ -631,7 +637,8 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, INIT_LIST_HEAD(&mpt3sas_port->port_list); INIT_LIST_HEAD(&mpt3sas_port->phy_list); spin_lock_irqsave(&ioc->sas_node_lock, flags); - sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address); + sas_node = _transport_sas_node_find_by_sas_address(ioc, + sas_address, hba_port); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (!sas_node) { @@ -655,7 +662,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, mpt3sas_port->hba_port = hba_port; _transport_sanity_check(ioc, sas_node, - mpt3sas_port->remote_identify.sas_address); + mpt3sas_port->remote_identify.sas_address, hba_port); for (i = 0; i < sas_node->num_phys; i++) { if (sas_node->phy[i].remote_identify.sas_address != @@ -676,6 +683,18 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, goto out_fail; } + if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { + sas_device = mpt3sas_get_sdev_by_addr(ioc, + mpt3sas_port->remote_identify.sas_address, + mpt3sas_port->hba_port); + if (!sas_device) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + sas_device->pend_sas_rphy_add = 1; + } + if (!sas_node->parent_dev) { ioc_err(ioc, "failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); @@ -716,18 +735,6 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, rphy->identify = mpt3sas_port->remote_identify; - if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { - sas_device = mpt3sas_get_sdev_by_addr(ioc, - mpt3sas_port->remote_identify.sas_address); - if (!sas_device) { - dfailprintk(ioc, - ioc_info(ioc, "failure at %s:%d/%s()!\n", - __FILE__, __LINE__, __func__)); - goto out_fail; - } - sas_device->pend_sas_rphy_add = 1; - } - if ((sas_rphy_add(rphy))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); @@ -793,7 +800,7 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_node = _transport_sas_node_find_by_sas_address(ioc, - sas_address_parent); + sas_address_parent, port); if (!sas_node) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return; @@ -1020,7 +1027,8 @@ mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, return; spin_lock_irqsave(&ioc->sas_node_lock, flags); - sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address); + sas_node = _transport_sas_node_find_by_sas_address(ioc, + sas_address, port); if (!sas_node) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return; @@ -1267,10 +1275,13 @@ _transport_get_linkerrors(struct sas_phy *phy) unsigned long flags; Mpi2ConfigReply_t mpi_reply; Mpi2SasPhyPage1_t phy_pg1; + struct hba_port *port = phy->hostdata; + int port_id = port->port_id; spin_lock_irqsave(&ioc->sas_node_lock, flags); if (_transport_sas_node_find_by_sas_address(ioc, - phy->identify.sas_address) == NULL) { + phy->identify.sas_address, + mpt3sas_get_port_by_id(ioc, port_id)) == NULL) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return -EINVAL; } @@ -1321,7 +1332,7 @@ _transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = __mpt3sas_get_sdev_by_addr(ioc, - rphy->identify.sas_address); + rphy->identify.sas_address, 0); if (sas_device) { *identifier = sas_device->enclosure_logical_id; rc = 0; @@ -1351,7 +1362,7 @@ _transport_get_bay_identifier(struct sas_rphy *rphy) spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = __mpt3sas_get_sdev_by_addr(ioc, - rphy->identify.sas_address); + rphy->identify.sas_address, 0); if (sas_device) { rc = sas_device->slot; sas_device_put(sas_device); @@ -1554,11 +1565,14 @@ _transport_phy_reset(struct sas_phy *phy, int hard_reset) struct MPT3SAS_ADAPTER *ioc = phy_to_ioc(phy); Mpi2SasIoUnitControlReply_t mpi_reply; Mpi2SasIoUnitControlRequest_t mpi_request; + struct hba_port *port = phy->hostdata; + int port_id = port->port_id; unsigned long flags; spin_lock_irqsave(&ioc->sas_node_lock, flags); if (_transport_sas_node_find_by_sas_address(ioc, - phy->identify.sas_address) == NULL) { + phy->identify.sas_address, + mpt3sas_get_port_by_id(ioc, port_id)) == NULL) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return -EINVAL; } @@ -1611,10 +1625,13 @@ _transport_phy_enable(struct sas_phy *phy, int enable) int rc = 0; unsigned long flags; int i, discovery_active; + struct hba_port *port = phy->hostdata; + int port_id = port->port_id; spin_lock_irqsave(&ioc->sas_node_lock, flags); if (_transport_sas_node_find_by_sas_address(ioc, - phy->identify.sas_address) == NULL) { + phy->identify.sas_address, + mpt3sas_get_port_by_id(ioc, port_id)) == NULL) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return -EINVAL; } @@ -1748,10 +1765,13 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) int i; int rc = 0; unsigned long flags; + struct hba_port *port = phy->hostdata; + int port_id = port->port_id; spin_lock_irqsave(&ioc->sas_node_lock, flags); if (_transport_sas_node_find_by_sas_address(ioc, - phy->identify.sas_address) == NULL) { + phy->identify.sas_address, + mpt3sas_get_port_by_id(ioc, port_id)) == NULL) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return -EINVAL; } -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit c71ccf93c00c0cef062c2371e9a614526fee9adb upstream. Renamed _transport_add_phy_to_an_existing_port() to mpt3sas_transport_add_phy_to_an_existing_port() and _transport_del_phy_from_an_existing_port() to mpt3sas_transport_del_phy_from_an_existing_port() as the driver needs to call these functions from outside mpt3sas_transport.c file. Added extra function argument 'port' of type struct hba_port to above functions and check for portID before adding/removing the phy from the _sas_port object. I.e. add/remove the phy from _sas_port object only if _sas_port's port object and phy's port object are the same. Link: https://lore.kernel.org/r/20201027130847.9962-7-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 7 +++++ drivers/scsi/mpt3sas/mpt3sas_transport.c | 35 ++++++++++++++++-------- 2 files changed, 30 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index c9a90a64510d..98aa405b8729 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1815,6 +1815,13 @@ void mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, struct hba_port *port); extern struct sas_function_template mpt3sas_transport_functions; extern struct scsi_transport_template *mpt3sas_transport_template; +void +mpt3sas_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy); +void +mpt3sas_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, + struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy, + u64 sas_address, struct hba_port *port); /* trigger data externs */ void mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data); diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 54c004e96170..560ce323646f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -503,16 +503,17 @@ _transport_add_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_port *mpt3sas_port, } /** - * _transport_add_phy_to_an_existing_port - adding new phy to existing port + * mpt3sas_transport_add_phy_to_an_existing_port - adding new phy to existing port * @ioc: per adapter object * @sas_node: sas node object (either expander or sas host) * @mpt3sas_phy: mpt3sas per phy object * @sas_address: sas address of device/expander were phy needs to be added to + * @port: hba port entry */ -static void -_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, +void +mpt3sas_transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy, - u64 sas_address) + u64 sas_address, struct hba_port *port) { struct _sas_port *mpt3sas_port; struct _sas_phy *phy_srch; @@ -520,11 +521,16 @@ _transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, if (mpt3sas_phy->phy_belongs_to_port == 1) return; + if (!port) + return; + list_for_each_entry(mpt3sas_port, &sas_node->sas_port_list, port_list) { if (mpt3sas_port->remote_identify.sas_address != sas_address) continue; + if (mpt3sas_port->hba_port != port) + continue; list_for_each_entry(phy_srch, &mpt3sas_port->phy_list, port_siblings) { if (phy_srch == mpt3sas_phy) @@ -537,13 +543,13 @@ _transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc, } /** - * _transport_del_phy_from_an_existing_port - delete phy from existing port + * mpt3sas_transport_del_phy_from_an_existing_port - delete phy from existing port * @ioc: per adapter object * @sas_node: sas node object (either expander or sas host) * @mpt3sas_phy: mpt3sas per phy object */ -static void -_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, +void +mpt3sas_transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, struct _sas_phy *mpt3sas_phy) { struct _sas_port *mpt3sas_port, *next; @@ -559,7 +565,11 @@ _transport_del_phy_from_an_existing_port(struct MPT3SAS_ADAPTER *ioc, if (phy_srch != mpt3sas_phy) continue; - if (mpt3sas_port->num_phys == 1) + /* + * Don't delete port during host reset, + * just delete phy. + */ + if (mpt3sas_port->num_phys == 1 && !ioc->shost_recovery) _transport_delete_port(ioc, mpt3sas_port); else _transport_delete_phy(ioc, mpt3sas_port, @@ -590,8 +600,8 @@ _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, if (sas_node->phy[i].port != port) continue; if (sas_node->phy[i].phy_belongs_to_port == 1) - _transport_del_phy_from_an_existing_port(ioc, sas_node, - &sas_node->phy[i]); + mpt3sas_transport_del_phy_from_an_existing_port(ioc, + sas_node, &sas_node->phy[i]); } } @@ -1040,8 +1050,6 @@ mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) { _transport_set_identify(ioc, handle, &mpt3sas_phy->remote_identify); - _transport_add_phy_to_an_existing_port(ioc, sas_node, - mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address); if (sas_node->handle <= ioc->sas_hba.num_phys) { list_for_each_entry(hba_port, &ioc->port_table_list, list) { @@ -1051,6 +1059,9 @@ mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, (1 << mpt3sas_phy->phy_id); } } + mpt3sas_transport_add_phy_to_an_existing_port(ioc, sas_node, + mpt3sas_phy, mpt3sas_phy->remote_identify.sas_address, + port); } else memset(&mpt3sas_phy->remote_identify, 0 , sizeof(struct sas_identify)); -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 6df6be9168f50369ba843f2a12fe8537effbaff1 upstream. In the following scsi_host_template and sas_function_template callback functions the driver does not have PhysicalPort number information to retrieve the sas_device object using SAS Address & PhysicalPort number. In these callback functions the device's rphy object is used to retrieve sas_device object for the device. .target_alloc, .get_enclosure_identifier .get_bay_identifier When a rphy (of type sas_rphy) object is allocated then its address is saved in corresponding sas_device object's rphy field. In __mpt3sas_get_sdev_by_rphy(), the driver loops over all the sas_device objects from sas_device_list list to retrieve the sas_device objects whose rphy matches the provided rphy. Link: https://lore.kernel.org/r/20201027130847.9962-8-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 5 +++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 41 ++++++++++++++++++++++-- drivers/scsi/mpt3sas/mpt3sas_transport.c | 7 ++-- 3 files changed, 47 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 98aa405b8729..20004012012b 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -537,6 +537,8 @@ struct _internal_cmd { * @chassis_slot: chassis slot * @is_chassis_slot_valid: chassis slot valid or not * @port: hba port entry containing device's port number info + * @rphy: device's sas_rphy address used to identify this device structure in + * target_alloc callback function */ struct _sas_device { struct list_head list; @@ -564,6 +566,7 @@ struct _sas_device { u8 connector_name[5]; struct kref refcount; struct hba_port *port; + struct sas_rphy *rphy; }; static inline void sas_device_get(struct _sas_device *s) @@ -1685,6 +1688,8 @@ void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc); struct _raid_device * mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle); void mpt3sas_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth); +struct _sas_device * +__mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc, struct sas_rphy *rphy); /* config shared API */ u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 610f233bc37c..38480645607b 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -638,6 +638,44 @@ mpt3sas_get_pdev_from_target(struct MPT3SAS_ADAPTER *ioc, return ret; } + +/** + * __mpt3sas_get_sdev_by_rphy - sas device search + * @ioc: per adapter object + * @rphy: sas_rphy pointer + * + * Context: This function will acquire ioc->sas_device_lock and will release + * before returning the sas_device object. + * + * This searches for sas_device from rphy object + * then return sas_device object. + */ +struct _sas_device * +__mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc, + struct sas_rphy *rphy) +{ + struct _sas_device *sas_device; + + assert_spin_locked(&ioc->sas_device_lock); + + list_for_each_entry(sas_device, &ioc->sas_device_list, list) { + if (sas_device->rphy != rphy) + continue; + sas_device_get(sas_device); + return sas_device; + } + + sas_device = NULL; + list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) { + if (sas_device->rphy != rphy) + continue; + sas_device_get(sas_device); + return sas_device; + } + + return NULL; +} + /** * mpt3sas_get_sdev_by_addr - get _sas_device object corresponding to provided * sas address from sas_device_list list @@ -1815,8 +1853,7 @@ scsih_target_alloc(struct scsi_target *starget) /* sas/sata devices */ spin_lock_irqsave(&ioc->sas_device_lock, flags); rphy = dev_to_rphy(starget->dev.parent); - sas_device = __mpt3sas_get_sdev_by_addr(ioc, - rphy->identify.sas_address, NULL); + sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); if (sas_device) { sas_target_priv_data->handle = sas_device->handle; diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 560ce323646f..3cc78c214ec4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -733,6 +733,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, mpt3sas_port->port = port; if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { rphy = sas_end_device_alloc(port); + sas_device->rphy = rphy; if (sas_node->handle <= ioc->sas_hba.num_phys) hba_port->sas_address = sas_device->sas_address; } else { @@ -1342,8 +1343,7 @@ _transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) int rc; spin_lock_irqsave(&ioc->sas_device_lock, flags); - sas_device = __mpt3sas_get_sdev_by_addr(ioc, - rphy->identify.sas_address, 0); + sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); if (sas_device) { *identifier = sas_device->enclosure_logical_id; rc = 0; @@ -1372,8 +1372,7 @@ _transport_get_bay_identifier(struct sas_rphy *rphy) int rc; spin_lock_irqsave(&ioc->sas_device_lock, flags); - sas_device = __mpt3sas_get_sdev_by_addr(ioc, - rphy->identify.sas_address, 0); + sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); if (sas_device) { rc = sas_device->slot; sas_device_put(sas_device); -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit a5e99fda017218516d3c66bec5ed346283ae722b upstream. During host reset there is a chance that the Port number allocated by the firmware for the attached devices may change. Also, it may be possible that some HBA phy's can go down/come up after reset. As a result, the driver can't just trust the HBA Port table that it has populated before host reset as valid. Instead it has to update the HBA Port table in such a way that it shouldn't disturb the drives which are still accessible even after host reset. Use the following algorithm to update the HBA Port table during host reset: I. After host reset operation and before marking the devices as responding/non-responding, create a temporary Port table called "New Port table" by parsing each of the HBA phy's Phy data info read from SAS IOUnit Page0: a. Check whether Phy's negotiated link rate is greater than 1.5Gbps, if not go to next Phy; b. Get the SAS Address of the attached device; c. Create a new entry in the "New Port table" with SAS Address field filled with attached device's SAS Address, port number with Phy's Port number (read from SAS IOUnit Page0) and enable bit in the 'Phy mask' field corresponding to current Phy number. New entry is created only if the driver can't find an entry in the "New Port table" which matches with attached device 'SAS Address' & 'Port Number'. If it finds an entry with matches with attached device 'SAS Address' & 'Port Number' then the driver takes that matched entry and will enable current Phy number bit in the 'Phy mask' field; d. After parsing all the HBA phy's info, the driver will have complete Port table info in "New Port table". II. Mark all the existing sas_device & sas_expander device structures as 'dirty'. III. Mark each entry of the HBA Port lists as 'dirty'. IV. Take each entry from 'New Port table' one by one and check whether the entry has any corresponding matched entry (which is marked as 'dirty') in the HBA Port table or not. While looking for a corresponding matched entry, look for matched entry in the sequence from top row to bottom row listed in the following table. If you find any matched entry (according to any of the rules tabulated below) then perform the action mentioned in the 'Action' column in that matched rule. =========================================================================== |Search |SAS | Phy Mask | Port | Possibilities| Action | |every |Address | or | Number | | required | |entry |matched?| subset of| matched?| | | |in below| | phy mask | | | | |sequence| | matched? | | | | =========================================================================== | 1 |matched | matched | matched | nothing |* unmark HBA port | | | | | | changed |table entry as | | | | | | |dirty | --------------------------------------------------------------------------- | 2 |matched | matched | not | port number |* Update port | | | | | matched | is changed |number in the | | | | | | |matched port table | | | | | | |entry | | | | | | |* unmask HBA port | | | | | | |table entry as | | | | | | |dirty | --------------------------------------------------------------------------- | 3.a |matched | subset of| matched |some phys |* Add these new | | | | phy mask | (or) |might have |phys to current | | | | matched | not |enabled which |port in STL | | | | | matched |are previously|* Update phy mask | | | | | (but |disabled |field in HBA's port| | | | | first | |table's matched | | | | | look for| |entry, | | | | | matched | |* Update port | | | | | one) | |number in the | | | | | | |matched port | | | | | | |table entry (if | | | | | | |port number is | | | | | | |changed), | | | | | | |* Unmask HBA port | | | | | | |table entry as | | | | | | |dirty | --------------------------------------------------------------------------- | 3.b |matched | subset of| matched |some phys |*Remove these phys | | | | phy mask | (or) |might have |from current port | | | | matched | not |disabled which|in STL | | | | | matched |are previously|* Update phy mask | | | | | (but |enabled |field in HBA's port| | | | | first | |tables's matched | | | | | look for| |entry, | | | | | matched | |*Update port number| | | | | one) | |in the matched port| | | | | | |table entry (if | | | | | | |port number is | | | | | | |changed), | | | | | | |* Unmask HBA port | | | | | | |table entry as | | | | | | |dirty | --------------------------------------------------------------------------- | 4 |matched | not | matched |A cable |*Remove old phys & | | | | matched | (or) |attached to an|new phys to current| | | | | not |expander is |port in STL | | | | | matched |changed to |* Update phy mask | | | | | |another HBA |field in HBA's port| | | | | |port during |tables's matched | | | | | |reset |entry, | | | | | | |*Update port number| | | | | | |in the matched port| | | | | | |table entry (if | | | | | | |port number is | | | | | | |changed), | | | | | | |* Unmask HBA port | | | | | | |table entry as | | | | | | |dirty | --------------------------------------------------------------------------- V. Delete the hba_port objects which are still marked as dirty. Link: https://lore.kernel.org/r/20201027130847.9962-9-sreekanth.reddy@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 338 +++++++++++++++++++++++++++ 1 file changed, 338 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 38480645607b..9bff16083547 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -5838,6 +5838,342 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) return 0; } +/** + * _scsih_get_port_table_after_reset - Construct temporary port table + * @ioc: per adapter object + * @port_table: address where port table needs to be constructed + * + * return number of HBA port entries available after reset. + */ +static int +_scsih_get_port_table_after_reset(struct MPT3SAS_ADAPTER *ioc, + struct hba_port *port_table) +{ + u16 sz, ioc_status; + int i, j; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + u16 attached_handle; + u64 attached_sas_addr; + u8 found = 0, port_count = 0, port_id; + + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys + * sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return port_count; + } + + if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz)) != 0) + goto out; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + goto out; + for (i = 0; i < ioc->sas_hba.num_phys; i++) { + found = 0; + if ((sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4) < + MPI2_SAS_NEG_LINK_RATE_1_5) + continue; + attached_handle = + le16_to_cpu(sas_iounit_pg0->PhyData[i].AttachedDevHandle); + if (_scsih_get_sas_address( + ioc, attached_handle, &attached_sas_addr) != 0) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + continue; + } + + for (j = 0; j < port_count; j++) { + port_id = sas_iounit_pg0->PhyData[i].Port; + if (port_table[j].port_id == port_id && + port_table[j].sas_address == attached_sas_addr) { + port_table[j].phy_mask |= (1 << i); + found = 1; + break; + } + } + + if (found) + continue; + + port_id = sas_iounit_pg0->PhyData[i].Port; + port_table[port_count].port_id = port_id; + port_table[port_count].phy_mask = (1 << i); + port_table[port_count].sas_address = attached_sas_addr; + port_count++; + } +out: + kfree(sas_iounit_pg0); + return port_count; +} + +enum hba_port_matched_codes { + NOT_MATCHED = 0, + MATCHED_WITH_ADDR_AND_PHYMASK, + MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT, + MATCHED_WITH_ADDR_AND_SUBPHYMASK, + MATCHED_WITH_ADDR, +}; + +/** + * _scsih_look_and_get_matched_port_entry - Get matched hba port entry + * from HBA port table + * @ioc: per adapter object + * @port_entry - hba port entry from temporary port table which needs to be + * searched for matched entry in the HBA port table + * @matched_port_entry - save matched hba port entry here + * @count - count of matched entries + * + * return type of matched entry found. + */ +static enum hba_port_matched_codes +_scsih_look_and_get_matched_port_entry(struct MPT3SAS_ADAPTER *ioc, + struct hba_port *port_entry, + struct hba_port **matched_port_entry, int *count) +{ + struct hba_port *port_table_entry, *matched_port = NULL; + enum hba_port_matched_codes matched_code = NOT_MATCHED; + int lcount = 0; + *matched_port_entry = NULL; + + list_for_each_entry(port_table_entry, &ioc->port_table_list, list) { + if (!(port_table_entry->flags & HBA_PORT_FLAG_DIRTY_PORT)) + continue; + + if ((port_table_entry->sas_address == port_entry->sas_address) + && (port_table_entry->phy_mask == port_entry->phy_mask)) { + matched_code = MATCHED_WITH_ADDR_AND_PHYMASK; + matched_port = port_table_entry; + break; + } + + if ((port_table_entry->sas_address == port_entry->sas_address) + && (port_table_entry->phy_mask & port_entry->phy_mask) + && (port_table_entry->port_id == port_entry->port_id)) { + matched_code = MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT; + matched_port = port_table_entry; + continue; + } + + if ((port_table_entry->sas_address == port_entry->sas_address) + && (port_table_entry->phy_mask & port_entry->phy_mask)) { + if (matched_code == + MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT) + continue; + matched_code = MATCHED_WITH_ADDR_AND_SUBPHYMASK; + matched_port = port_table_entry; + continue; + } + + if (port_table_entry->sas_address == port_entry->sas_address) { + if (matched_code == + MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT) + continue; + if (matched_code == MATCHED_WITH_ADDR_AND_SUBPHYMASK) + continue; + matched_code = MATCHED_WITH_ADDR; + matched_port = port_table_entry; + lcount++; + } + } + + *matched_port_entry = matched_port; + if (matched_code == MATCHED_WITH_ADDR) + *count = lcount; + return matched_code; +} + +/** + * _scsih_del_phy_part_of_anther_port - remove phy if it + * is a part of anther port + *@ioc: per adapter object + *@port_table: port table after reset + *@index: hba port entry index + *@port_count: number of ports available after host reset + *@offset: HBA phy bit offset + * + */ +static void +_scsih_del_phy_part_of_anther_port(struct MPT3SAS_ADAPTER *ioc, + struct hba_port *port_table, + int index, u8 port_count, int offset) +{ + struct _sas_node *sas_node = &ioc->sas_hba; + u32 i, found = 0; + + for (i = 0; i < port_count; i++) { + if (i == index) + continue; + + if (port_table[i].phy_mask & (1 << offset)) { + mpt3sas_transport_del_phy_from_an_existing_port( + ioc, sas_node, &sas_node->phy[offset]); + found = 1; + break; + } + } + if (!found) + port_table[index].phy_mask |= (1 << offset); +} + +/** + * _scsih_add_or_del_phys_from_existing_port - add/remove phy to/from + * right port + *@ioc: per adapter object + *@hba_port_entry: hba port table entry + *@port_table: temporary port table + *@index: hba port entry index + *@port_count: number of ports available after host reset + * + */ +static void +_scsih_add_or_del_phys_from_existing_port(struct MPT3SAS_ADAPTER *ioc, + struct hba_port *hba_port_entry, struct hba_port *port_table, + int index, int port_count) +{ + u32 phy_mask, offset = 0; + struct _sas_node *sas_node = &ioc->sas_hba; + + phy_mask = hba_port_entry->phy_mask ^ port_table[index].phy_mask; + + for (offset = 0; offset < ioc->sas_hba.num_phys; offset++) { + if (phy_mask & (1 << offset)) { + if (!(port_table[index].phy_mask & (1 << offset))) { + _scsih_del_phy_part_of_anther_port( + ioc, port_table, index, port_count, + offset); + continue; + } + if (sas_node->phy[offset].phy_belongs_to_port) + mpt3sas_transport_del_phy_from_an_existing_port( + ioc, sas_node, &sas_node->phy[offset]); + mpt3sas_transport_add_phy_to_an_existing_port( + ioc, sas_node, &sas_node->phy[offset], + hba_port_entry->sas_address, + hba_port_entry); + } + } +} + +/** + * _scsih_del_dirty_port_entries - delete dirty port entries from port list + * after host reset + *@ioc: per adapter object + * + */ +static void +_scsih_del_dirty_port_entries(struct MPT3SAS_ADAPTER *ioc) +{ + struct hba_port *port, *port_next; + + list_for_each_entry_safe(port, port_next, + &ioc->port_table_list, list) { + if (!(port->flags & HBA_PORT_FLAG_DIRTY_PORT) || + port->flags & HBA_PORT_FLAG_NEW_PORT) + continue; + + drsprintk(ioc, ioc_info(ioc, + "Deleting port table entry %p having Port: %d\t Phy_mask 0x%08x\n", + port, port->port_id, port->phy_mask)); + list_del(&port->list); + kfree(port); + } +} + +/** + * _scsih_sas_port_refresh - Update HBA port table after host reset + * @ioc: per adapter object + */ +static void +_scsih_sas_port_refresh(struct MPT3SAS_ADAPTER *ioc) +{ + u32 port_count = 0; + struct hba_port *port_table; + struct hba_port *port_table_entry; + struct hba_port *port_entry = NULL; + int i, j, count = 0, lcount = 0; + int ret; + u64 sas_addr; + + drsprintk(ioc, ioc_info(ioc, + "updating ports for sas_host(0x%016llx)\n", + (unsigned long long)ioc->sas_hba.sas_address)); + + port_table = kcalloc(ioc->sas_hba.num_phys, + sizeof(struct hba_port), GFP_KERNEL); + if (!port_table) + return; + + port_count = _scsih_get_port_table_after_reset(ioc, port_table); + if (!port_count) + return; + + drsprintk(ioc, ioc_info(ioc, "New Port table\n")); + for (j = 0; j < port_count; j++) + drsprintk(ioc, ioc_info(ioc, + "Port: %d\t Phy_mask 0x%08x\t sas_addr(0x%016llx)\n", + port_table[j].port_id, + port_table[j].phy_mask, port_table[j].sas_address)); + + list_for_each_entry(port_table_entry, &ioc->port_table_list, list) + port_table_entry->flags |= HBA_PORT_FLAG_DIRTY_PORT; + + drsprintk(ioc, ioc_info(ioc, "Old Port table\n")); + port_table_entry = NULL; + list_for_each_entry(port_table_entry, &ioc->port_table_list, list) { + drsprintk(ioc, ioc_info(ioc, + "Port: %d\t Phy_mask 0x%08x\t sas_addr(0x%016llx)\n", + port_table_entry->port_id, + port_table_entry->phy_mask, + port_table_entry->sas_address)); + } + + for (j = 0; j < port_count; j++) { + ret = _scsih_look_and_get_matched_port_entry(ioc, + &port_table[j], &port_entry, &count); + if (!port_entry) { + drsprintk(ioc, ioc_info(ioc, + "No Matched entry for sas_addr(0x%16llx), Port:%d\n", + port_table[j].sas_address, + port_table[j].port_id)); + continue; + } + + switch (ret) { + case MATCHED_WITH_ADDR_SUBPHYMASK_AND_PORT: + case MATCHED_WITH_ADDR_AND_SUBPHYMASK: + _scsih_add_or_del_phys_from_existing_port(ioc, + port_entry, port_table, j, port_count); + break; + case MATCHED_WITH_ADDR: + sas_addr = port_table[j].sas_address; + for (i = 0; i < port_count; i++) { + if (port_table[i].sas_address == sas_addr) + lcount++; + } + + if (count > 1 || lcount > 1) + port_entry = NULL; + else + _scsih_add_or_del_phys_from_existing_port(ioc, + port_entry, port_table, j, port_count); + } + + if (!port_entry) + continue; + + if (port_entry->port_id != port_table[j].port_id) + port_entry->port_id = port_table[j].port_id; + port_entry->flags &= ~HBA_PORT_FLAG_DIRTY_PORT; + port_entry->phy_mask = port_table[j].phy_mask; + } + + port_table_entry = NULL; +} + /** * _scsih_sas_host_refresh - refreshing sas host object contents * @ioc: per adapter object @@ -9814,6 +10150,7 @@ mpt3sas_scsih_reset_done_handler(struct MPT3SAS_ADAPTER *ioc) dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__)); if ((!ioc->is_driver_loading) && !(disable_discovery > 0 && !ioc->sas_hba.num_phys)) { + _scsih_sas_port_refresh(ioc); _scsih_prep_device_scan(ioc); _scsih_create_enclosure_list_after_reset(ioc); _scsih_search_responding_sas_devices(ioc); @@ -9861,6 +10198,7 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event) ssleep(1); } _scsih_remove_unresponding_devices(ioc); + _scsih_del_dirty_port_entries(ioc); _scsih_scan_for_devices_after_reset(ioc); _scsih_set_nvme_max_shutdown_latency(ioc); break; -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 9d0348a9d8e35142b809d0b92534312a22f6fd78 upstream. The driver currently sets PhysicalPort field to 0xFF for SMPPassthrough Request message. In zoning topologies this SMPPassthrough command always operates on devices in one zone (default zone) even when user issues SMP command for other zone drives. Define _transport_get_port_id_by_rphy() and _transport_get_port_id_by_sas_phy() helper functions to get Physical Port number from sas_rphy & sas_phy respectively for SMPPassthrough request message so that SMP Passthrough request message is sent to intended zone device. Link: https://lore.kernel.org/r/20201027130847.9962-10-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 2 + drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1 + drivers/scsi/mpt3sas/mpt3sas_transport.c | 75 ++++++++++++++++++++++-- 3 files changed, 72 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 20004012012b..5a855531c89c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -788,6 +788,7 @@ struct _sas_phy { * @phy: a list of phys that make up this sas_host/expander * @sas_port_list: list of ports attached to this sas_host/expander * @port: hba port entry containing node's port number info + * @rphy: sas_rphy object of this expander */ struct _sas_node { struct list_head list; @@ -802,6 +803,7 @@ struct _sas_node { struct hba_port *port; struct _sas_phy *phy; struct list_head sas_port_list; + struct sas_rphy *rphy; }; /** diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 9bff16083547..3a04083f01ab 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -6534,6 +6534,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) goto out_fail; } sas_expander->parent_dev = &mpt3sas_port->rphy->dev; + sas_expander->rphy = mpt3sas_port->rphy; for (i = 0 ; i < sas_expander->num_phys ; i++) { if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply, diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 3cc78c214ec4..d52d8b3161f2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -60,6 +60,24 @@ #include "mpt3sas_base.h" +/** + * _transport_get_port_id_by_sas_phy - get zone's port id that Phy belong to + * @phy - sas_phy object + * + * Return Port number + */ +static inline u8 +_transport_get_port_id_by_sas_phy(struct sas_phy *phy) +{ + u8 port_id = 0xFF; + struct hba_port *port = phy->hostdata; + + if (port) + port_id = port->port_id; + + return port_id; +} + /** * _transport_sas_node_find_by_sas_address - sas node search * @ioc: per adapter object @@ -81,6 +99,49 @@ _transport_sas_node_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc, sas_address, port); } +/** + * _transport_get_port_id_by_rphy - Get Port number from rphy object + * @ioc: per adapter object + * @rphy: sas_rphy object + * + * Returns Port number. + */ +static u8 +_transport_get_port_id_by_rphy(struct MPT3SAS_ADAPTER *ioc, + struct sas_rphy *rphy) +{ + struct _sas_node *sas_expander; + struct _sas_device *sas_device; + unsigned long flags; + u8 port_id = 0xFF; + + if (!rphy) + return port_id; + + if (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE || + rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) { + spin_lock_irqsave(&ioc->sas_node_lock, flags); + list_for_each_entry(sas_expander, + &ioc->sas_expander_list, list) { + if (sas_expander->rphy == rphy) { + port_id = sas_expander->port->port_id; + break; + } + } + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + } else if (rphy->identify.device_type == SAS_END_DEVICE) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = __mpt3sas_get_sdev_by_rphy(ioc, rphy); + if (sas_device) { + port_id = sas_device->port->port_id; + sas_device_put(sas_device); + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } + + return port_id; +} + /** * _transport_convert_phy_link_rate - * @link_rate: link rate returned from mpt firmware @@ -289,7 +350,7 @@ struct rep_manu_reply { */ static int _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc, - u64 sas_address, struct sas_expander_device *edev) + u64 sas_address, struct sas_expander_device *edev, u8 port_id) { Mpi2SmpPassthroughRequest_t *mpi_request; Mpi2SmpPassthroughReply_t *mpi_reply; @@ -356,7 +417,7 @@ _transport_expander_report_manufacture(struct MPT3SAS_ADAPTER *ioc, memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; - mpi_request->PhysicalPort = 0xFF; + mpi_request->PhysicalPort = port_id; mpi_request->SASAddress = cpu_to_le64(sas_address); mpi_request->RequestDataLength = cpu_to_le16(data_out_sz); psge = &mpi_request->SGL; @@ -772,7 +833,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) _transport_expander_report_manufacture(ioc, mpt3sas_port->remote_identify.sas_address, - rphy_to_expander_device(rphy)); + rphy_to_expander_device(rphy), hba_port->port_id); return mpt3sas_port; out_fail: @@ -923,6 +984,7 @@ mpt3sas_transport_add_host_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy phy_pg0.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); phy->maximum_linkrate = _transport_convert_phy_link_rate( phy_pg0.ProgrammedLinkRate >> 4); + phy->hostdata = mpt3sas_phy->port; if ((sas_phy_add(phy))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -993,6 +1055,7 @@ mpt3sas_transport_add_expander_phy(struct MPT3SAS_ADAPTER *ioc, struct _sas_phy expander_pg1.ProgrammedLinkRate & MPI2_SAS_PRATE_MIN_RATE_MASK); phy->maximum_linkrate = _transport_convert_phy_link_rate( expander_pg1.ProgrammedLinkRate >> 4); + phy->hostdata = mpt3sas_phy->port; if ((sas_phy_add(phy))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -1197,7 +1260,7 @@ _transport_get_expander_phy_error_log(struct MPT3SAS_ADAPTER *ioc, memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; - mpi_request->PhysicalPort = 0xFF; + mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy); mpi_request->VF_ID = 0; /* TODO */ mpi_request->VP_ID = 0; mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); @@ -1493,7 +1556,7 @@ _transport_expander_phy_control(struct MPT3SAS_ADAPTER *ioc, memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; - mpi_request->PhysicalPort = 0xFF; + mpi_request->PhysicalPort = _transport_get_port_id_by_sas_phy(phy); mpi_request->VF_ID = 0; /* TODO */ mpi_request->VP_ID = 0; mpi_request->SASAddress = cpu_to_le64(phy->identify.sas_address); @@ -1983,7 +2046,7 @@ _transport_smp_handler(struct bsg_job *job, struct Scsi_Host *shost, memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t)); mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH; - mpi_request->PhysicalPort = 0xFF; + mpi_request->PhysicalPort = _transport_get_port_id_by_rphy(ioc, rphy); mpi_request->SASAddress = (rphy) ? cpu_to_le64(rphy->identify.sas_address) : cpu_to_le64(ioc->sas_hba.sas_address); -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit ccc59923ba8d44ecf7cb60135e9934bbb619da10 upstream. Each direct attached device will have a unique Port ID, but with an exception. HBA vSES may use the same Port ID of another direct attached device Port's ID. As a result, special handling is needed for vSES. Create a virtual_phy object when a new HBA vSES device is detected and add this virtual_phy object to vphys_list of port ID's hba_port object. When the HBA vSES device is removed then remove the corresponding virtual_phy object from its parent's hba_port's vphy_list and free this virtual_vphy object. In hba_port object add vphy_mask field to hold the list of HBA phy bits which are assigned to vSES devices. Also add vphy_list list to hold list of virtual_phy objects which holds the same portID of current hba_port's portID. Also, add a hba_vphy field in _sas_phy object to determine whether this _sas_phy object belongs to vSES device or not. - Allocate a virtual_phy object whenever a virtual phy is detected while processing the SASIOUnitPage0's phy data. And this allocated virtual_phy object to corresponding PortID's hba_port's vphy_list. - When a vSES device is added to the SML then initialize the corresponding virtual_phy objects's sas_address field with vSES device's SAS Address. - Free this virtual_phy object during driver unload time and when this vSES device is removed. Link: https://lore.kernel.org/r/20201027130847.9962-11-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 23 +++++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 106 +++++++++++++++++++++++ drivers/scsi/mpt3sas/mpt3sas_transport.c | 80 ++++++++++++++--- 3 files changed, 198 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 5a855531c89c..c67123595d9d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -771,6 +771,7 @@ struct _sas_phy { u16 handle; u16 attached_handle; u8 phy_belongs_to_port; + u8 hba_vphy; struct hba_port *port; }; @@ -1023,12 +1024,29 @@ struct reply_post_struct { dma_addr_t reply_post_free_dma; }; +/** + * struct virtual_phy - vSES phy structure + * sas_address: SAS Address of vSES device + * phy_mask: vSES device's phy number + * flags: flags used to manage this structure + */ +struct virtual_phy { + struct list_head list; + u64 sas_address; + u32 phy_mask; + u8 flags; +}; + +#define MPT_VPHY_FLAG_DIRTY_PHY 0x01 + /** * struct hba_port - Saves each HBA's Wide/Narrow port info * @sas_address: sas address of this wide/narrow port's attached device * @phy_mask: HBA PHY's belonging to this port * @port_id: port number * @flags: hba port flags + * @vphys_mask : mask of vSES devices Phy number + * @vphys_list : list containing vSES device structures */ struct hba_port { struct list_head list; @@ -1036,6 +1054,8 @@ struct hba_port { u32 phy_mask; u8 port_id; u8 flags; + u32 vphys_mask; + struct list_head vphys_list; }; /* hba port flags */ @@ -1692,6 +1712,9 @@ mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle); void mpt3sas_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth); struct _sas_device * __mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc, struct sas_rphy *rphy); +struct virtual_phy * +mpt3sas_get_vphy_by_phy(struct MPT3SAS_ADAPTER *ioc, + struct hba_port *port, u32 phy); /* config shared API */ u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 3a04083f01ab..469c4c5a49c3 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -380,6 +380,30 @@ mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port_id) return NULL; } +/** + * mpt3sas_get_vphy_by_phy - get virtual_phy object corresponding to phy number + * @ioc: per adapter object + * @port: hba_port object + * @phy: phy number + * + * Return virtual_phy object corresponding to phy number. + */ +struct virtual_phy * +mpt3sas_get_vphy_by_phy(struct MPT3SAS_ADAPTER *ioc, + struct hba_port *port, u32 phy) +{ + struct virtual_phy *vphy, *vphy_next; + + if (!port->vphys_mask) + return NULL; + + list_for_each_entry_safe(vphy, vphy_next, &port->vphys_list, list) { + if (vphy->phy_mask & (1 << phy)) + return vphy; + } + return NULL; +} + /** * _scsih_is_boot_device - search for matching boot device. * @sas_address: sas address @@ -6174,6 +6198,47 @@ _scsih_sas_port_refresh(struct MPT3SAS_ADAPTER *ioc) port_table_entry = NULL; } +/** + * _scsih_alloc_vphy - allocate virtual_phy object + * @ioc: per adapter object + * @port_id: Port ID number + * @phy_num: HBA Phy number + * + * Returns allocated virtual_phy object. + */ +static struct virtual_phy * +_scsih_alloc_vphy(struct MPT3SAS_ADAPTER *ioc, u8 port_id, u8 phy_num) +{ + struct virtual_phy *vphy; + struct hba_port *port; + + port = mpt3sas_get_port_by_id(ioc, port_id); + if (!port) + return NULL; + + vphy = mpt3sas_get_vphy_by_phy(ioc, port, phy_num); + if (!vphy) { + vphy = kzalloc(sizeof(struct virtual_phy), GFP_KERNEL); + if (!vphy) + return NULL; + + /* + * Enable bit corresponding to HBA phy number on its + * parent hba_port object's vphys_mask field. + */ + port->vphys_mask |= (1 << phy_num); + vphy->phy_mask |= (1 << phy_num); + + INIT_LIST_HEAD(&port->vphys_list); + list_add_tail(&vphy->list, &port->vphys_list); + + ioc_info(ioc, + "vphy entry: %p, port id: %d, phy:%d is added to port's vphys_list\n", + vphy, port->port_id, phy_num); + } + return vphy; +} + /** * _scsih_sas_host_refresh - refreshing sas host object contents * @ioc: per adapter object @@ -6194,6 +6259,7 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) u16 attached_handle; u8 link_rate, port_id; struct hba_port *port; + Mpi2SasPhyPage0_t phy_pg0; dtmprintk(ioc, ioc_info(ioc, "updating handles for sas_host(0x%016llx)\n", @@ -6233,6 +6299,31 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) port->flags = HBA_PORT_FLAG_NEW_PORT; list_add_tail(&port->list, &ioc->port_table_list); } + /* + * Check whether current Phy belongs to HBA vSES device or not. + */ + if (le32_to_cpu(sas_iounit_pg0->PhyData[i].ControllerPhyDeviceInfo) & + MPI2_SAS_DEVICE_INFO_SEP && + (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) { + if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, + &phy_pg0, i))) { + ioc_err(ioc, + "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + if (!(le32_to_cpu(phy_pg0.PhyInfo) & + MPI2_SAS_PHYINFO_VIRTUAL_PHY)) + continue; + /* + * Allocate a virtual_phy object for vSES device, if + * this vSES device is hot added. + */ + if (!_scsih_alloc_vphy(ioc, port_id, i)) + goto out; + ioc->sas_hba.phy[i].hba_vphy = 1; + } + ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i]. AttachedDevHandle); @@ -6375,6 +6466,21 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc) &ioc->port_table_list); } + /* + * Check whether current Phy belongs to HBA vSES device or not. + */ + if ((le32_to_cpu(phy_pg0.PhyInfo) & + MPI2_SAS_PHYINFO_VIRTUAL_PHY) && + (phy_pg0.NegotiatedLinkRate >> 4) >= + MPI2_SAS_NEG_LINK_RATE_1_5) { + /* + * Allocate a virtual_phy object for vSES device. + */ + if (!_scsih_alloc_vphy(ioc, port_id, i)) + goto out; + ioc->sas_hba.phy[i].hba_vphy = 1; + } + ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; ioc->sas_hba.phy[i].phy_id = i; ioc->sas_hba.phy[i].port = mpt3sas_get_port_by_id(ioc, port_id); diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index d52d8b3161f2..256dae106ec6 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -690,6 +690,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, struct _sas_device *sas_device = NULL; int i; struct sas_port *port; + struct virtual_phy *vphy = NULL; if (!hba_port) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -743,9 +744,20 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, continue; list_add_tail(&sas_node->phy[i].port_siblings, &mpt3sas_port->phy_list); - if (sas_node->handle <= ioc->sas_hba.num_phys) - hba_port->phy_mask |= (1 << i); mpt3sas_port->num_phys++; + if (sas_node->handle <= ioc->sas_hba.num_phys) { + if (!sas_node->phy[i].hba_vphy) { + hba_port->phy_mask |= (1 << i); + continue; + } + + vphy = mpt3sas_get_vphy_by_phy(ioc, hba_port, i); + if (!vphy) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + } } if (!mpt3sas_port->num_phys) { @@ -795,8 +807,14 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { rphy = sas_end_device_alloc(port); sas_device->rphy = rphy; - if (sas_node->handle <= ioc->sas_hba.num_phys) - hba_port->sas_address = sas_device->sas_address; + if (sas_node->handle <= ioc->sas_hba.num_phys) { + if (!vphy) + hba_port->sas_address = + sas_device->sas_address; + else + vphy->sas_address = + sas_device->sas_address; + } } else { rphy = sas_expander_alloc(port, mpt3sas_port->remote_identify.device_type); @@ -866,6 +884,7 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, u8 found = 0; struct _sas_phy *mpt3sas_phy, *next_phy; struct hba_port *hba_port_next, *hba_port = NULL; + struct virtual_phy *vphy, *vphy_next = NULL; if (!port) return; @@ -894,17 +913,56 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, } if (sas_node->handle <= ioc->sas_hba.num_phys) { + if (port->vphys_mask) { + list_for_each_entry_safe(vphy, vphy_next, + &port->vphys_list, list) { + if (vphy->sas_address != sas_address) + continue; + ioc_info(ioc, + "remove vphy entry: %p of port:%p,from %d port's vphys list\n", + vphy, port, port->port_id); + port->vphys_mask &= ~vphy->phy_mask; + list_del(&vphy->list); + kfree(vphy); + } + } + list_for_each_entry_safe(hba_port, hba_port_next, &ioc->port_table_list, list) { if (hba_port != port) continue; - if (hba_port->sas_address != sas_address) - continue; - ioc_info(ioc, - "remove hba_port entry: %p port: %d from hba_port list\n", - hba_port, hba_port->port_id); - list_del(&hba_port->list); - kfree(hba_port); + /* + * Delete hba_port object if + * - hba_port object's sas address matches with current + * removed device's sas address and no vphy's + * associated with it. + * - Current removed device is a vSES device and + * none of the other direct attached device have + * this vSES device's port number (hence hba_port + * object sas_address field will be zero). + */ + if ((hba_port->sas_address == sas_address || + !hba_port->sas_address) && !hba_port->vphys_mask) { + ioc_info(ioc, + "remove hba_port entry: %p port: %d from hba_port list\n", + hba_port, hba_port->port_id); + list_del(&hba_port->list); + kfree(hba_port); + } else if (hba_port->sas_address == sas_address && + hba_port->vphys_mask) { + /* + * Current removed device is a non vSES device + * and a vSES device has the same port number + * as of current device's port number. Hence + * only clear the sas_address filed, don't + * delete the hba_port object. + */ + ioc_info(ioc, + "clearing sas_address from hba_port entry: %p port: %d from hba_port list\n", + hba_port, hba_port->port_id); + port->sas_address = 0; + } + break; } } -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 34b0a78532f61e6059a26c0252fbc28c73761384 upstream. Added a new parameter bypass_dirty_port_flag in function mpt3sas_get_port_by_id(). When this parameter is set to one then search for matching hba port entry from port_table_list even when this hba_port entry is marked as dirty. Link: https://lore.kernel.org/r/20201027130847.9962-12-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 3 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 63 ++++++++++++++---------- drivers/scsi/mpt3sas/mpt3sas_transport.c | 8 +-- 3 files changed, 44 insertions(+), 30 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index c67123595d9d..372b9e95f14a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1688,7 +1688,8 @@ void mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc, u8 mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc, u16 smid); struct hba_port * -mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port); +mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port, + u8 bypass_dirty_port_flag); struct _sas_node *mpt3sas_scsih_expander_find_by_handle( struct MPT3SAS_ADAPTER *ioc, u16 handle); diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 469c4c5a49c3..2084fcf71284 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -361,20 +361,27 @@ _scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number, * port number from port list * @ioc: per adapter object * @port_id: port number + * @bypass_dirty_port_flag: when set look the matching hba port entry even + * if hba port entry is marked as dirty. * * Search for hba port entry corresponding to provided port number, * if available return port object otherwise return NULL. */ struct hba_port * -mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, u8 port_id) +mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, + u8 port_id, u8 bypass_dirty_port_flag) { struct hba_port *port, *port_next; list_for_each_entry_safe(port, port_next, &ioc->port_table_list, list) { - if (port->port_id == port_id && - !(port->flags & HBA_PORT_FLAG_DIRTY_PORT)) + if (port->port_id != port_id) + continue; + if (bypass_dirty_port_flag) return port; + if (port->flags & HBA_PORT_FLAG_DIRTY_PORT) + continue; + return port; } return NULL; @@ -6212,7 +6219,7 @@ _scsih_alloc_vphy(struct MPT3SAS_ADAPTER *ioc, u8 port_id, u8 phy_num) struct virtual_phy *vphy; struct hba_port *port; - port = mpt3sas_get_port_by_id(ioc, port_id); + port = mpt3sas_get_port_by_id(ioc, port_id, 0); if (!port) return NULL; @@ -6286,7 +6293,7 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) ioc->sas_hba.handle = le16_to_cpu( sas_iounit_pg0->PhyData[0].ControllerDevHandle); port_id = sas_iounit_pg0->PhyData[i].Port; - if (!(mpt3sas_get_port_by_id(ioc, port_id))) { + if (!(mpt3sas_get_port_by_id(ioc, port_id, 0))) { port = kzalloc(sizeof(struct hba_port), GFP_KERNEL); if (!port) goto out; @@ -6329,7 +6336,8 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) AttachedDevHandle); if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) link_rate = MPI2_SAS_NEG_LINK_RATE_1_5; - ioc->sas_hba.phy[i].port = mpt3sas_get_port_by_id(ioc, port_id); + ioc->sas_hba.phy[i].port = + mpt3sas_get_port_by_id(ioc, port_id, 0); mpt3sas_transport_update_links(ioc, ioc->sas_hba.sas_address, attached_handle, i, link_rate, ioc->sas_hba.phy[i].port); @@ -6453,7 +6461,7 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc) PhyData[0].ControllerDevHandle); port_id = sas_iounit_pg0->PhyData[i].Port; - if (!(mpt3sas_get_port_by_id(ioc, port_id))) { + if (!(mpt3sas_get_port_by_id(ioc, port_id, 0))) { port = kzalloc(sizeof(struct hba_port), GFP_KERNEL); if (!port) goto out; @@ -6483,7 +6491,8 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc) ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; ioc->sas_hba.phy[i].phy_id = i; - ioc->sas_hba.phy[i].port = mpt3sas_get_port_by_id(ioc, port_id); + ioc->sas_hba.phy[i].port = + mpt3sas_get_port_by_id(ioc, port_id, 0); mpt3sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i], phy_pg0, ioc->sas_hba.parent_dev); } @@ -6575,7 +6584,8 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) if (sas_address_parent != ioc->sas_hba.sas_address) { spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc, - sas_address_parent, mpt3sas_get_port_by_id(ioc, port_id)); + sas_address_parent, + mpt3sas_get_port_by_id(ioc, port_id, 0)); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (!sas_expander) { rc = _scsih_expander_add(ioc, parent_handle); @@ -6587,7 +6597,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_address = le64_to_cpu(expander_pg0.SASAddress); sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc, - sas_address, mpt3sas_get_port_by_id(ioc, port_id)); + sas_address, mpt3sas_get_port_by_id(ioc, port_id, 0)); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (sas_expander) @@ -6605,7 +6615,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) sas_expander->num_phys = expander_pg0.NumPhys; sas_expander->sas_address_parent = sas_address_parent; sas_expander->sas_address = sas_address; - sas_expander->port = mpt3sas_get_port_by_id(ioc, port_id); + sas_expander->port = mpt3sas_get_port_by_id(ioc, port_id, 0); if (!sas_expander->port) { ioc_err(ioc, "failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); @@ -6652,7 +6662,8 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) } sas_expander->phy[i].handle = handle; sas_expander->phy[i].phy_id = i; - sas_expander->phy[i].port = mpt3sas_get_port_by_id(ioc, port_id); + sas_expander->phy[i].port = + mpt3sas_get_port_by_id(ioc, port_id, 0); if ((mpt3sas_transport_add_expander_phy(ioc, &sas_expander->phy[i], expander_pg1, @@ -6859,7 +6870,7 @@ _scsih_check_device(struct MPT3SAS_ADAPTER *ioc, spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_address = le64_to_cpu(sas_device_pg0.SASAddress); - port = mpt3sas_get_port_by_id(ioc, sas_device_pg0.PhysicalPort); + port = mpt3sas_get_port_by_id(ioc, sas_device_pg0.PhysicalPort, 0); if (!port) goto out_unlock; sas_device = __mpt3sas_get_sdev_by_addr(ioc, @@ -6992,7 +7003,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num, port_id = sas_device_pg0.PhysicalPort; sas_device = mpt3sas_get_sdev_by_addr(ioc, - sas_address, mpt3sas_get_port_by_id(ioc, port_id)); + sas_address, mpt3sas_get_port_by_id(ioc, port_id, 0)); if (sas_device) { clear_bit(handle, ioc->pend_os_device_add); sas_device_put(sas_device); @@ -7033,7 +7044,7 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num, sas_device->phy = sas_device_pg0.PhyNum; sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) & MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0; - sas_device->port = mpt3sas_get_port_by_id(ioc, port_id); + sas_device->port = mpt3sas_get_port_by_id(ioc, port_id, 0); if (!sas_device->port) { ioc_err(ioc, "failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); @@ -7248,7 +7259,7 @@ _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc, } parent_handle = le16_to_cpu(event_data->ExpanderDevHandle); - port = mpt3sas_get_port_by_id(ioc, event_data->PhysicalPort); + port = mpt3sas_get_port_by_id(ioc, event_data->PhysicalPort, 0); /* handle expander add */ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED) @@ -7439,7 +7450,8 @@ _scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc, spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_address = le64_to_cpu(event_data->SASAddress); sas_device = __mpt3sas_get_sdev_by_addr(ioc, - sas_address, mpt3sas_get_port_by_id(ioc, event_data->PhysicalPort)); + sas_address, + mpt3sas_get_port_by_id(ioc, event_data->PhysicalPort, 0)); if (!sas_device || !sas_device->starget) goto out; @@ -8880,7 +8892,8 @@ _scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc, if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) mpt3sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5, - mpt3sas_get_port_by_id(ioc, sas_device_pg0.PhysicalPort)); + mpt3sas_get_port_by_id(ioc, + sas_device_pg0.PhysicalPort, 0)); _scsih_ir_fastpath(ioc, handle, element->PhysDiskNum); _scsih_add_device(ioc, handle, 0, 1); @@ -9188,7 +9201,7 @@ _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc, mpt3sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5, mpt3sas_get_port_by_id(ioc, - sas_device_pg0.PhysicalPort)); + sas_device_pg0.PhysicalPort, 0)); _scsih_add_device(ioc, handle, 0, 1); @@ -9314,7 +9327,7 @@ Mpi2SasDevicePage0_t *sas_device_pg0) struct _enclosure_node *enclosure_dev = NULL; unsigned long flags; struct hba_port *port = mpt3sas_get_port_by_id( - ioc, sas_device_pg0->PhysicalPort); + ioc, sas_device_pg0->PhysicalPort, 0); if (sas_device_pg0->EnclosureHandle) { enclosure_dev = @@ -9742,7 +9755,7 @@ _scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc, u16 enclosure_handle = le16_to_cpu(expander_pg0->EnclosureHandle); u64 sas_address = le64_to_cpu(expander_pg0->SASAddress); struct hba_port *port = mpt3sas_get_port_by_id( - ioc, expander_pg0->PhysicalPort); + ioc, expander_pg0->PhysicalPort, 0); if (enclosure_handle) enclosure_dev = @@ -9989,7 +10002,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) port_id = expander_pg0.PhysicalPort; expander_device = mpt3sas_scsih_expander_find_by_sas_address( ioc, le64_to_cpu(expander_pg0.SASAddress), - mpt3sas_get_port_by_id(ioc, port_id)); + mpt3sas_get_port_by_id(ioc, port_id, 0)); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); if (expander_device) _scsih_refresh_expander_links(ioc, expander_device, @@ -10052,7 +10065,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) mpt3sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5, - mpt3sas_get_port_by_id(ioc, port_id)); + mpt3sas_get_port_by_id(ioc, port_id, 0)); set_bit(handle, ioc->pd_handles); retry_count = 0; /* This will retry adding the end device. @@ -10141,7 +10154,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) port_id = sas_device_pg0.PhysicalPort; sas_device = mpt3sas_get_sdev_by_addr(ioc, le64_to_cpu(sas_device_pg0.SASAddress), - mpt3sas_get_port_by_id(ioc, port_id)); + mpt3sas_get_port_by_id(ioc, port_id, 0)); if (sas_device) { sas_device_put(sas_device); continue; @@ -10153,7 +10166,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) (u64)le64_to_cpu(sas_device_pg0.SASAddress)); mpt3sas_transport_update_links(ioc, sas_address, handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5, - mpt3sas_get_port_by_id(ioc, port_id)); + mpt3sas_get_port_by_id(ioc, port_id, 0)); retry_count = 0; /* This will retry adding the end device. * _scsih_add_device() will decide on retries and diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 256dae106ec6..0d06025d7102 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -1414,7 +1414,7 @@ _transport_get_linkerrors(struct sas_phy *phy) spin_lock_irqsave(&ioc->sas_node_lock, flags); if (_transport_sas_node_find_by_sas_address(ioc, phy->identify.sas_address, - mpt3sas_get_port_by_id(ioc, port_id)) == NULL) { + mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return -EINVAL; } @@ -1703,7 +1703,7 @@ _transport_phy_reset(struct sas_phy *phy, int hard_reset) spin_lock_irqsave(&ioc->sas_node_lock, flags); if (_transport_sas_node_find_by_sas_address(ioc, phy->identify.sas_address, - mpt3sas_get_port_by_id(ioc, port_id)) == NULL) { + mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return -EINVAL; } @@ -1762,7 +1762,7 @@ _transport_phy_enable(struct sas_phy *phy, int enable) spin_lock_irqsave(&ioc->sas_node_lock, flags); if (_transport_sas_node_find_by_sas_address(ioc, phy->identify.sas_address, - mpt3sas_get_port_by_id(ioc, port_id)) == NULL) { + mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return -EINVAL; } @@ -1902,7 +1902,7 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) spin_lock_irqsave(&ioc->sas_node_lock, flags); if (_transport_sas_node_find_by_sas_address(ioc, phy->identify.sas_address, - mpt3sas_get_port_by_id(ioc, port_id)) == NULL) { + mpt3sas_get_port_by_id(ioc, port_id, 0)) == NULL) { spin_unlock_irqrestore(&ioc->sas_node_lock, flags); return -EINVAL; } -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit ffa381d6373b10e83dbdac425fb72affc64084f3 upstream. During HBA reset the Port ID of vSES device may change. As a result, it is necessary to refresh virtual_phy objects after reset. Each Port's vphy_list table needs to be updated after updating the HBA port table. The algorithm is as follows: - Loop over each port entry from HBA port table * Loop over each virtual phy entry from port's vphys_list table - Mark virtual phy entry as dirty by setting dirty bit in virtual phy entry's flags field - Read SASIOUnitPage0 page - Loop over each HBA Phy's Phy data from SASIOUnitPage0 * If phy's remote attached device is not SES device then continue with processing next HBA Phy's Phy data; * Read SASPhyPage0 data for this Phy number and determine whether current phy is a virtual phy or not. If it is not a virtual phy then continue with next Phy data; * Get the current phy's remote attached vSES device's SAS Address; * Loop over each port entry from HBA port table - If Port's vphys_mask field is zero then continue with next Port entry, - Loop over each virtual phy entry from Port's vphy_list table - If the current phy's remote SAS Address is different from virtual phy entry's SAS Address then continue with next virtual phy entry, - Set bit corresponding to current phy number in virtual phy entry's phy_mask field, - Get the HBA port table's Port entry corresponding to Phy data's 'Port' value, * If there is no Port entry corresponding to Phy data's 'Port' value in HBA port table then create a new port entry and add it to HBA port table. - If this retrieved Port entry is the same as the current Port entry then don't do anything, just clear the dirty bit from virtual phy entry's flag field and continue with processing next HBA Phy's Phy data. - If this retrieved Port entry is different from the current Port entry then move the current virtual phy entry from current Port's vphys_list to retrieved Port entry's vphys_list. * Clear current phy bit in current Port entry's vphys_mask and set the current phy bit in the retrieved Port entry's vphys_mask field. * Clear the dirty bit from virtual phy entry's flag field and continue with next HBA Phy's Phy data. - Delete the 'virtual phy' entries and HBA's 'Port table' entries which are still marked as 'dirty'. Link: https://lore.kernel.org/r/20201027130847.9962-13-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 233 +++++++++++++++++++++++++++ 1 file changed, 233 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 2084fcf71284..91fcead16599 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -5869,6 +5869,204 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) return 0; } +/** + * _scsih_update_vphys_after_reset - update the Port's + * vphys_list after reset + * @ioc: per adapter object + * + * Returns nothing. + */ +static void +_scsih_update_vphys_after_reset(struct MPT3SAS_ADAPTER *ioc) +{ + u16 sz, ioc_status; + int i; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; + u16 attached_handle; + u64 attached_sas_addr; + u8 found = 0, port_id; + Mpi2SasPhyPage0_t phy_pg0; + struct hba_port *port, *port_next, *mport; + struct virtual_phy *vphy, *vphy_next; + struct _sas_device *sas_device; + + /* + * Mark all the vphys objects as dirty. + */ + list_for_each_entry_safe(port, port_next, + &ioc->port_table_list, list) { + if (!port->vphys_mask) + continue; + list_for_each_entry_safe(vphy, vphy_next, + &port->vphys_list, list) { + vphy->flags |= MPT_VPHY_FLAG_DIRTY_PHY; + } + } + + /* + * Read SASIOUnitPage0 to get each HBA Phy's data. + */ + sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + + (ioc->sas_hba.num_phys * sizeof(Mpi2SasIOUnit0PhyData_t)); + sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg0) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return; + } + if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, + sas_iounit_pg0, sz)) != 0) + goto out; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + goto out; + /* + * Loop over each HBA Phy. + */ + for (i = 0; i < ioc->sas_hba.num_phys; i++) { + /* + * Check whether Phy's Negotiation Link Rate is > 1.5G or not. + */ + if ((sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4) < + MPI2_SAS_NEG_LINK_RATE_1_5) + continue; + /* + * Check whether Phy is connected to SEP device or not, + * if it is SEP device then read the Phy's SASPHYPage0 data to + * determine whether Phy is a virtual Phy or not. if it is + * virtual phy then it is conformed that the attached remote + * device is a HBA's vSES device. + */ + if (!(le32_to_cpu( + sas_iounit_pg0->PhyData[i].ControllerPhyDeviceInfo) & + MPI2_SAS_DEVICE_INFO_SEP)) + continue; + + if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, + i))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + continue; + } + + if (!(le32_to_cpu(phy_pg0.PhyInfo) & + MPI2_SAS_PHYINFO_VIRTUAL_PHY)) + continue; + /* + * Get the vSES device's SAS Address. + */ + attached_handle = le16_to_cpu( + sas_iounit_pg0->PhyData[i].AttachedDevHandle); + if (_scsih_get_sas_address(ioc, attached_handle, + &attached_sas_addr) != 0) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + continue; + } + + found = 0; + port = port_next = NULL; + /* + * Loop over each virtual_phy object from + * each port's vphys_list. + */ + list_for_each_entry_safe(port, + port_next, &ioc->port_table_list, list) { + if (!port->vphys_mask) + continue; + list_for_each_entry_safe(vphy, vphy_next, + &port->vphys_list, list) { + /* + * Continue with next virtual_phy object + * if the object is not marked as dirty. + */ + if (!(vphy->flags & MPT_VPHY_FLAG_DIRTY_PHY)) + continue; + + /* + * Continue with next virtual_phy object + * if the object's SAS Address is not equals + * to current Phy's vSES device SAS Address. + */ + if (vphy->sas_address != attached_sas_addr) + continue; + /* + * Enable current Phy number bit in object's + * phy_mask field. + */ + if (!(vphy->phy_mask & (1 << i))) + vphy->phy_mask = (1 << i); + /* + * Get hba_port object from hba_port table + * corresponding to current phy's Port ID. + * if there is no hba_port object corresponding + * to Phy's Port ID then create a new hba_port + * object & add to hba_port table. + */ + port_id = sas_iounit_pg0->PhyData[i].Port; + mport = mpt3sas_get_port_by_id(ioc, port_id, 1); + if (!mport) { + mport = kzalloc( + sizeof(struct hba_port), GFP_KERNEL); + if (!mport) + break; + mport->port_id = port_id; + ioc_info(ioc, + "%s: hba_port entry: %p, port: %d is added to hba_port list\n", + __func__, mport, mport->port_id); + list_add_tail(&mport->list, + &ioc->port_table_list); + } + /* + * If mport & port pointers are not pointing to + * same hba_port object then it means that vSES + * device's Port ID got changed after reset and + * hence move current virtual_phy object from + * port's vphys_list to mport's vphys_list. + */ + if (port != mport) { + if (!mport->vphys_mask) + INIT_LIST_HEAD( + &mport->vphys_list); + mport->vphys_mask |= (1 << i); + port->vphys_mask &= ~(1 << i); + list_move(&vphy->list, + &mport->vphys_list); + sas_device = mpt3sas_get_sdev_by_addr( + ioc, attached_sas_addr, port); + if (sas_device) + sas_device->port = mport; + } + /* + * Earlier while updating the hba_port table, + * it is determined that there is no other + * direct attached device with mport's Port ID, + * Hence mport was marked as dirty. Only vSES + * device has this Port ID, so unmark the mport + * as dirt. + */ + if (mport->flags & HBA_PORT_FLAG_DIRTY_PORT) { + mport->sas_address = 0; + mport->phy_mask = 0; + mport->flags &= + ~HBA_PORT_FLAG_DIRTY_PORT; + } + /* + * Unmark current virtual_phy object as dirty. + */ + vphy->flags &= ~MPT_VPHY_FLAG_DIRTY_PHY; + found = 1; + break; + } + if (found) + break; + } + } +out: + kfree(sas_iounit_pg0); +} + /** * _scsih_get_port_table_after_reset - Construct temporary port table * @ioc: per adapter object @@ -6089,6 +6287,39 @@ _scsih_add_or_del_phys_from_existing_port(struct MPT3SAS_ADAPTER *ioc, } } +/** + * _scsih_del_dirty_vphy - delete virtual_phy objects marked as dirty. + * @ioc: per adapter object + * + * Returns nothing. + */ +static void +_scsih_del_dirty_vphy(struct MPT3SAS_ADAPTER *ioc) +{ + struct hba_port *port, *port_next; + struct virtual_phy *vphy, *vphy_next; + + list_for_each_entry_safe(port, port_next, + &ioc->port_table_list, list) { + if (!port->vphys_mask) + continue; + list_for_each_entry_safe(vphy, vphy_next, + &port->vphys_list, list) { + if (vphy->flags & MPT_VPHY_FLAG_DIRTY_PHY) { + drsprintk(ioc, ioc_info(ioc, + "Deleting vphy %p entry from port id: %d\t, Phy_mask 0x%08x\n", + vphy, port->port_id, + vphy->phy_mask)); + port->vphys_mask &= ~vphy->phy_mask; + list_del(&vphy->list); + kfree(vphy); + } + } + if (!port->vphys_mask && !port->sas_address) + port->flags |= HBA_PORT_FLAG_DIRTY_PORT; + } +} + /** * _scsih_del_dirty_port_entries - delete dirty port entries from port list * after host reset @@ -10271,6 +10502,7 @@ mpt3sas_scsih_reset_done_handler(struct MPT3SAS_ADAPTER *ioc) if ((!ioc->is_driver_loading) && !(disable_discovery > 0 && !ioc->sas_hba.num_phys)) { _scsih_sas_port_refresh(ioc); + _scsih_update_vphys_after_reset(ioc); _scsih_prep_device_scan(ioc); _scsih_create_enclosure_list_after_reset(ioc); _scsih_search_responding_sas_devices(ioc); @@ -10318,6 +10550,7 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event) ssleep(1); } _scsih_remove_unresponding_devices(ioc); + _scsih_del_dirty_vphy(ioc); _scsih_del_dirty_port_entries(ioc); _scsih_scan_for_devices_after_reset(ioc); _scsih_set_nvme_max_shutdown_latency(ioc); -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 324c122fc0a41d258239c853854eefd186ae1290 upstream. Add module parameter multipath_on_hba to enable/disable multi-port path topology support. By default this feature is enabled on SAS3.5 HBA device and disabled on SAS3 &SAS2.5 HBA devices. When this feature is disabled then driver uses a default PhysicalPort(PortID) number i.e. 255 instead of the PhysicalPort number provided by HBA firmware. Link: https://lore.kernel.org/r/20201027130847.9962-14-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 2 + drivers/scsi/mpt3sas/mpt3sas_ctl.c | 6 ++- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 69 ++++++++++++++++++++++-- drivers/scsi/mpt3sas/mpt3sas_transport.c | 6 ++- 4 files changed, 76 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 372b9e95f14a..13c27f54209a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1246,6 +1246,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * which ensures the syncrhonization between cli/sysfs_show path. * @atomic_desc_capable: Atomic Request Descriptor support. * @GET_MSIX_INDEX: Get the msix index of high iops queues. + * @multipath_on_hba: flag to determine multipath on hba is enabled or not * @port_table_list: list containing HBA's wide/narrow port's info */ struct MPT3SAS_ADAPTER { @@ -1540,6 +1541,7 @@ struct MPT3SAS_ADAPTER { PUT_SMID_DEFAULT put_smid_default; GET_MSIX_INDEX get_msix_index_for_smlio; + u8 multipath_on_hba; struct list_head port_table_list; }; diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index edd26a2570fa..c8a0ce18f2c5 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -902,8 +902,10 @@ _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg, (Mpi2SmpPassthroughRequest_t *)mpi_request; u8 *data; - /* ioc determines which port to use */ - smp_request->PhysicalPort = 0xFF; + if (!ioc->multipath_on_hba) { + /* ioc determines which port to use */ + smp_request->PhysicalPort = 0xFF; + } if (smp_request->PassthroughFlags & MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE) data = (u8 *)&smp_request->SGL; diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 91fcead16599..60893248efad 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -159,6 +159,15 @@ module_param(enable_sdev_max_qd, bool, 0444); MODULE_PARM_DESC(enable_sdev_max_qd, "Enable sdev max qd as can_queue, def=disabled(0)"); +static int multipath_on_hba = -1; +module_param(multipath_on_hba, int, 0); +MODULE_PARM_DESC(multipath_on_hba, + "Multipath support to add same target device\n\t\t" + "as many times as it is visible to HBA from various paths\n\t\t" + "(by default:\n\t\t" + "\t SAS 2.0 & SAS 3.0 HBA - This will be disabled,\n\t\t" + "\t SAS 3.5 HBA - This will be enabled)"); + /* raid transport support */ static struct raid_template *mpt3sas_raid_template; static struct raid_template *mpt2sas_raid_template; @@ -373,6 +382,14 @@ mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, { struct hba_port *port, *port_next; + /* + * When multipath_on_hba is disabled then + * search the hba_port entry using default + * port id i.e. 255 + */ + if (!ioc->multipath_on_hba) + port_id = MULTIPATH_DISABLED_PORT_ID; + list_for_each_entry_safe(port, port_next, &ioc->port_table_list, list) { if (port->port_id != port_id) @@ -384,6 +401,24 @@ mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, return port; } + /* + * Allocate hba_port object for default port id (i.e. 255) + * when multipath_on_hba is disabled for the HBA. + * And add this object to port_table_list. + */ + if (!ioc->multipath_on_hba) { + port = kzalloc(sizeof(struct hba_port), GFP_KERNEL); + if (!port) + return NULL; + + port->port_id = port_id; + ioc_info(ioc, + "hba_port entry: %p, port: %d is added to hba_port list\n", + port, port->port_id); + list_add_tail(&port->list, + &ioc->port_table_list); + return port; + } return NULL; } @@ -10038,6 +10073,7 @@ _scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc) u16 ioc_status; u64 sas_address; u16 handle; + u8 port; ioc_info(ioc, "search for expanders: start\n"); @@ -10055,10 +10091,12 @@ _scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc) handle = le16_to_cpu(expander_pg0.DevHandle); sas_address = le64_to_cpu(expander_pg0.SASAddress); + port = expander_pg0.PhysicalPort; pr_info( "\texpander present: handle(0x%04x), sas_addr(0x%016llx), port:%d\n", handle, (unsigned long long)sas_address, - expander_pg0.PhysicalPort); + (ioc->multipath_on_hba ? + port : MULTIPATH_DISABLED_PORT_ID)); _scsih_mark_responding_expander(ioc, &expander_pg0); } @@ -10501,8 +10539,10 @@ mpt3sas_scsih_reset_done_handler(struct MPT3SAS_ADAPTER *ioc) dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__)); if ((!ioc->is_driver_loading) && !(disable_discovery > 0 && !ioc->sas_hba.num_phys)) { - _scsih_sas_port_refresh(ioc); - _scsih_update_vphys_after_reset(ioc); + if (ioc->multipath_on_hba) { + _scsih_sas_port_refresh(ioc); + _scsih_update_vphys_after_reset(ioc); + } _scsih_prep_device_scan(ioc); _scsih_create_enclosure_list_after_reset(ioc); _scsih_search_responding_sas_devices(ioc); @@ -11796,6 +11836,12 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS; break; } + + if (multipath_on_hba == -1 || multipath_on_hba == 0) + ioc->multipath_on_hba = 0; + else + ioc->multipath_on_hba = 1; + break; case MPI25_VERSION: case MPI26_VERSION: @@ -11857,6 +11903,23 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) ioc->combined_reply_index_count = MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3; } + + switch (ioc->is_gen35_ioc) { + case 0: + if (multipath_on_hba == -1 || multipath_on_hba == 0) + ioc->multipath_on_hba = 0; + else + ioc->multipath_on_hba = 1; + break; + case 1: + if (multipath_on_hba == -1 || multipath_on_hba > 0) + ioc->multipath_on_hba = 1; + else + ioc->multipath_on_hba = 0; + default: + break; + } + break; default: return -ENODEV; diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 0d06025d7102..6f4708224755 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -912,7 +912,8 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, return; } - if (sas_node->handle <= ioc->sas_hba.num_phys) { + if (sas_node->handle <= ioc->sas_hba.num_phys && + (ioc->multipath_on_hba)) { if (port->vphys_mask) { list_for_each_entry_safe(vphy, vphy_next, &port->vphys_list, list) { @@ -1172,7 +1173,8 @@ mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc, if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) { _transport_set_identify(ioc, handle, &mpt3sas_phy->remote_identify); - if (sas_node->handle <= ioc->sas_hba.num_phys) { + if ((sas_node->handle <= ioc->sas_hba.num_phys) && + (ioc->multipath_on_hba)) { list_for_each_entry(hba_port, &ioc->port_table_list, list) { if (hba_port->sas_address == sas_address && -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 2030745877bdd2ecbeb43ff1846242d004482587 upstream. Bump mpt3sas driver version to 35.101.00.00 Link: https://lore.kernel.org/r/20201027130847.9962-15-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 13c27f54209a..c5ab29d48e25 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -76,9 +76,9 @@ #define MPT3SAS_DRIVER_NAME "mpt3sas" #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "35.100.00.00" +#define MPT3SAS_DRIVER_VERSION "35.101.00.00" #define MPT3SAS_MAJOR_VERSION 35 -#define MPT3SAS_MINOR_VERSION 100 +#define MPT3SAS_MINOR_VERSION 101 #define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 -- 2.33.0
From: Lee Jones <lee.jones@linaro.org> Commit e330c96968680b2b72f73636f00321886792eb71 upstream. Fixes the following W=1 kernel build warning(s): drivers/scsi/mpt3sas/mpt3sas_scsih.c:2778: warning: Function parameter or member 'ioc' not described in 'scsih_tm_cmd_map_status' drivers/scsi/mpt3sas/mpt3sas_scsih.c:2778: warning: Function parameter or member 'channel' not described in 'scsih_tm_cmd_map_status' drivers/scsi/mpt3sas/mpt3sas_scsih.c:2829: warning: Function parameter or member 'ioc' not described in 'scsih_tm_post_processing' drivers/scsi/mpt3sas/mpt3sas_scsih.c:2829: warning: Function parameter or member 'channel' not described in 'scsih_tm_post_processing' Link: https://lore.kernel.org/r/20201102142359.561122-3-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 60893248efad..8b053851399e 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -2922,8 +2922,8 @@ mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle) /** * scsih_tm_cmd_map_status - map the target reset & LUN reset TM status - * @ioc - per adapter object - * @channel - the channel assigned by the OS + * @ioc: per adapter object + * @channel: the channel assigned by the OS * @id: the id assigned by the OS * @lun: lun number * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h) @@ -2968,9 +2968,9 @@ scsih_tm_cmd_map_status(struct MPT3SAS_ADAPTER *ioc, uint channel, /** * scsih_tm_post_processing - post processing of target & LUN reset - * @ioc - per adapter object + * @ioc: per adapter object * @handle: device handle - * @channel - the channel assigned by the OS + * @channel: the channel assigned by the OS * @id: the id assigned by the OS * @lun: lun number * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h) -- 2.33.0
From: Vaibhav Gupta <vaibhavgupta40@gmail.com> Commit eaf148359d009d70aec13ae3772675b25890822e upstream. The driver calls pci_enable_wake(...., false) in scsih_resume(), and there is no corresponding pci_enable_wake(...., true) in scsih_suspend(). Either it should do enable-wake the device in .suspend() or should not invoke pci_enable_wake() at all. Concluding that this driver doesn't support enable-wake and PCI core calls pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from scsih_resume(). Link: https://lore.kernel.org/r/20201102164730.324035-16-vaibhavgupta40@gmail.com Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 8b053851399e..d60c18dd64da 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -12134,7 +12134,6 @@ scsih_resume(struct pci_dev *pdev) pdev, pci_name(pdev), device_state); pci_set_power_state(pdev, PCI_D0); - pci_enable_wake(pdev, PCI_D0, 0); pci_restore_state(pdev); ioc->pdev = pdev; r = mpt3sas_base_map_resources(ioc); -- 2.33.0
From: Vaibhav Gupta <vaibhavgupta40@gmail.com> Commit 17287305a526fa3e3faae0d7c950f5b10df3fe9a upstream. Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. Link: https://lore.kernel.org/r/20201102164730.324035-17-vaibhavgupta40@gmail.com Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 34 +++++++++++----------------- 1 file changed, 13 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index d60c18dd64da..714644ddb7bb 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -12078,20 +12078,18 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) return rv; } -#ifdef CONFIG_PM /** * scsih_suspend - power management suspend main entry point - * @pdev: PCI device struct - * @state: PM state change to (usually PCI_D3) + * @dev: Device struct * * Return: 0 success, anything else error. */ -static int -scsih_suspend(struct pci_dev *pdev, pm_message_t state) +static int __maybe_unused +scsih_suspend(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct Scsi_Host *shost; struct MPT3SAS_ADAPTER *ioc; - pci_power_t device_state; int rc; rc = _scsih_get_shost_and_ioc(pdev, &shost, &ioc); @@ -12102,25 +12100,23 @@ scsih_suspend(struct pci_dev *pdev, pm_message_t state) flush_scheduled_work(); scsi_block_requests(shost); _scsih_nvme_shutdown(ioc); - device_state = pci_choose_state(pdev, state); - ioc_info(ioc, "pdev=0x%p, slot=%s, entering operating state [D%d]\n", - pdev, pci_name(pdev), device_state); + ioc_info(ioc, "pdev=0x%p, slot=%s, entering operating state\n", + pdev, pci_name(pdev)); - pci_save_state(pdev); mpt3sas_base_free_resources(ioc); - pci_set_power_state(pdev, device_state); return 0; } /** * scsih_resume - power management resume main entry point - * @pdev: PCI device struct + * @dev: Device struct * * Return: 0 success, anything else error. */ -static int -scsih_resume(struct pci_dev *pdev) +static int __maybe_unused +scsih_resume(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct Scsi_Host *shost; struct MPT3SAS_ADAPTER *ioc; pci_power_t device_state = pdev->current_state; @@ -12133,8 +12129,6 @@ scsih_resume(struct pci_dev *pdev) ioc_info(ioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n", pdev, pci_name(pdev), device_state); - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); ioc->pdev = pdev; r = mpt3sas_base_map_resources(ioc); if (r) @@ -12145,7 +12139,6 @@ scsih_resume(struct pci_dev *pdev) mpt3sas_base_start_watchdog(ioc); return 0; } -#endif /* CONFIG_PM */ /** * scsih_pci_error_detected - Called when a PCI error is detected. @@ -12447,6 +12440,8 @@ static struct pci_error_handlers _mpt3sas_err_handler = { .resume = scsih_pci_resume, }; +static SIMPLE_DEV_PM_OPS(scsih_pm_ops, scsih_suspend, scsih_resume); + static struct pci_driver mpt3sas_driver = { .name = MPT3SAS_DRIVER_NAME, .id_table = mpt3sas_pci_table, @@ -12454,10 +12449,7 @@ static struct pci_driver mpt3sas_driver = { .remove = scsih_remove, .shutdown = scsih_shutdown, .err_handler = &_mpt3sas_err_handler, -#ifdef CONFIG_PM - .suspend = scsih_suspend, - .resume = scsih_resume, -#endif + .driver.pm = &scsih_pm_ops, }; /** -- 2.33.0
From: "Ahmed S. Darwish" <a.darwish@linutronix.de> Commit 547c0d1aeb76fead5177cc30b95e914b498675bd upstream. _scsih_fw_event_cleanup_queue() waits for all outstanding firmware events wokrqueue handlers to finish. If in_interrupt() is true, it cancels itself and return early. That in_interrupt() check is ill-defined and does not provide what the name suggests: it does not cover all states in which it is safe to block and call functions like cancel_work_sync(). That check is also not needed: _scsih_fw_event_cleanup_queue() is always invoked from process context. Below is an analysis of its callers: - scsih_remove(), bound to PCI ->remove(), process context - scsih_shutdown(), bound to PCI ->shutdown(), process context - mpt3sas_scsih_clear_outstanding_scsi_tm_commands(), called by => _base_clear_outstanding_commands(), called by =>_base_fault_reset_work(), workqueue => mpt3sas_base_hard_reset_handler(), locks mutex Remove the in_interrupt() check. Change _scsih_fw_event_cleanup_queue() specification to a purely process-context function and mark it with "Context: task, can sleep". Link: https://lore.kernel.org/r/20201126132952.2287996-10-bigeasy@linutronix.de Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: <MPT-FusionLinux.pdl@broadcom.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 714644ddb7bb..13ad1b66420d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3673,6 +3673,8 @@ static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc) * * Walk the firmware event queue, either killing timers, or waiting * for outstanding events to complete + * + * Context: task, can sleep */ static void _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc) @@ -3680,7 +3682,7 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc) struct fw_event_work *fw_event; if ((list_empty(&ioc->fw_event_list) && !ioc->current_event) || - !ioc->firmware_event_thread || in_interrupt()) + !ioc->firmware_event_thread) return; ioc->fw_events_cleanup = 1; -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit f98790c0037590cd7022ba9e22cf4ff90d3b2bb3 upstream. The controller time currently gets updated with host time during driver load or when a controller reset is issued. I.e. when host issues the IOCInit request message to the HBA firmware. This IOCInit message has a field named 'TimeStamp' with which the host updates the controller time. Sometimes controller time drifts with respect to the host and it is difficult to correlate host logs with controller logs. Issuing a controller reset to sync the time would impact in-flight I/O and is not a viable option. Instead the driver now sends an IO_UNIT_CONTROL Request to sync the time periodically. This is done from the watchdog thread which gets invoked every second. The time synchronization interval is specified in the 'TimeSyncInterval' field in Manufacturing Page11 by the controller: TimeSyncInterval - 8 bits bits 0-6: Time stamp Synchronization interval value bit 7: Time stamp Synchronization interval unit, (if this bit is one then Timestamp Synchronization interval value is specified in terms of hours else Timestamp Synchronization interval value is specified in terms of minutes). The driver keeps track of the timer using IOC's timestamp_update_count field. This field value gets incremented whenever the watchdog thread gets invoked. And whenever this field value is greater than or equal to the Time Stamp Synchronization interval value, the driver sends the IO_UNIT_CONTROL Request message to controller to update the time and then it resets the timestamp_update_count field to zero. Link: https://lore.kernel.org/r/20201126094311.8686-2-suganath-prabu.subramani@bro... Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 93 ++++++++++++++++++++++++++++- drivers/scsi/mpt3sas/mpt3sas_base.h | 14 ++++- 2 files changed, 104 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 58024699eeaf..37dc537c3c1d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -596,6 +596,71 @@ static int mpt3sas_remove_dead_ioc_func(void *arg) return 0; } +/** + * _base_sync_drv_fw_timestamp - Sync Drive-Fw TimeStamp. + * @ioc: Per Adapter Object + * + * Return nothing. + */ +static void _base_sync_drv_fw_timestamp(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi26IoUnitControlRequest_t *mpi_request; + Mpi26IoUnitControlReply_t *mpi_reply; + u16 smid; + ktime_t current_time; + u64 TimeStamp = 0; + u8 issue_reset = 0; + + mutex_lock(&ioc->scsih_cmds.mutex); + if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) { + ioc_err(ioc, "scsih_cmd in use %s\n", __func__); + goto out; + } + ioc->scsih_cmds.status = MPT3_CMD_PENDING; + smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx); + if (!smid) { + ioc_err(ioc, "Failed obtaining a smid %s\n", __func__); + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; + goto out; + } + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + ioc->scsih_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi26IoUnitControlRequest_t)); + mpi_request->Function = MPI2_FUNCTION_IO_UNIT_CONTROL; + mpi_request->Operation = MPI26_CTRL_OP_SET_IOC_PARAMETER; + mpi_request->IOCParameter = MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP; + current_time = ktime_get_real(); + TimeStamp = ktime_to_ms(current_time); + mpi_request->Reserved7 = cpu_to_le32(TimeStamp & 0xFFFFFFFF); + mpi_request->IOCParameterValue = cpu_to_le32(TimeStamp >> 32); + init_completion(&ioc->scsih_cmds.done); + ioc->put_smid_default(ioc, smid); + dinitprintk(ioc, ioc_info(ioc, + "Io Unit Control Sync TimeStamp (sending), @time %lld ms\n", + TimeStamp)); + wait_for_completion_timeout(&ioc->scsih_cmds.done, + MPT3SAS_TIMESYNC_TIMEOUT_SECONDS*HZ); + if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) { + mpt3sas_check_cmd_timeout(ioc, + ioc->scsih_cmds.status, mpi_request, + sizeof(Mpi2SasIoUnitControlRequest_t)/4, issue_reset); + goto issue_host_reset; + } + if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) { + mpi_reply = ioc->scsih_cmds.reply; + dinitprintk(ioc, ioc_info(ioc, + "Io Unit Control sync timestamp (complete): ioc_status(0x%04x), loginfo(0x%08x)\n", + le16_to_cpu(mpi_reply->IOCStatus), + le32_to_cpu(mpi_reply->IOCLogInfo))); + } +issue_host_reset: + if (issue_reset) + mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); + ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; +out: + mutex_unlock(&ioc->scsih_cmds.mutex); +} + /** * _base_fault_reset_work - workq handling ioc fault conditions * @work: input argument, used to derive ioc @@ -720,7 +785,11 @@ _base_fault_reset_work(struct work_struct *work) return; /* don't rearm timer */ } ioc->ioc_coredump_loop = 0; - + if (ioc->time_sync_interval && + ++ioc->timestamp_update_count >= ioc->time_sync_interval) { + ioc->timestamp_update_count = 0; + _base_sync_drv_fw_timestamp(ioc); + } spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); rearm_timer: if (ioc->fault_reset_work_q) @@ -744,6 +813,7 @@ mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc) if (ioc->fault_reset_work_q) return; + ioc->timestamp_update_count = 0; /* initialize fault polling */ INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); @@ -4762,7 +4832,24 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) else ioc->nvme_abort_timeout = ioc->manu_pg11.NVMeAbortTO; } - + ioc->time_sync_interval = + ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_MASK; + if (ioc->time_sync_interval) { + if (ioc->manu_pg11.TimeSyncInterval & MPT3SAS_TIMESYNC_UNIT_MASK) + ioc->time_sync_interval = + ioc->time_sync_interval * SECONDS_PER_HOUR; + else + ioc->time_sync_interval = + ioc->time_sync_interval * SECONDS_PER_MIN; + dinitprintk(ioc, ioc_info(ioc, + "Driver-FW TimeSync interval is %d seconds. ManuPg11 TimeSync Unit is in %s\n", + ioc->time_sync_interval, (ioc->manu_pg11.TimeSyncInterval & + MPT3SAS_TIMESYNC_UNIT_MASK) ? "Hour" : "Minute")); + } else { + if (ioc->is_gen35_ioc) + ioc_warn(ioc, + "TimeSync Interval in Manuf page-11 is not enabled. Periodic Time-Sync will be disabled\n"); + } mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); @@ -6474,6 +6561,8 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc) r = -EIO; } + /* Reset TimeSync Counter*/ + ioc->timestamp_update_count = 0; return r; } diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index c5ab29d48e25..a250add2797d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -93,6 +93,14 @@ /* CoreDump: Default timeout */ #define MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS (15) /*15 seconds*/ #define MPT3SAS_COREDUMP_LOOP_DONE (0xFF) +#define MPT3SAS_TIMESYNC_TIMEOUT_SECONDS (10) /* 10 seconds */ +#define MPT3SAS_TIMESYNC_UPDATE_INTERVAL (900) /* 15 minutes */ +#define MPT3SAS_TIMESYNC_UNIT_MASK (0x80) /* bit 7 */ +#define MPT3SAS_TIMESYNC_MASK (0x7F) /* 0 - 6 bits */ +#define SECONDS_PER_MIN (60) +#define SECONDS_PER_HOUR (3600) +#define MPT3SAS_COREDUMP_LOOP_DONE (0xFF) +#define MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP (0x81) /* * Set MPT3SAS_SG_DEPTH value based on user input. @@ -405,7 +413,7 @@ struct Mpi2ManufacturingPage11_t { u16 HostTraceBufferMaxSizeKB; /* 50h */ u16 HostTraceBufferMinSizeKB; /* 52h */ u8 CoreDumpTOSec; /* 54h */ - u8 Reserved8; /* 55h */ + u8 TimeSyncInterval; /* 55h */ u16 Reserved9; /* 56h */ __le32 Reserved10; /* 58h */ }; @@ -1113,6 +1121,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @cpu_msix_table_sz: table size * @total_io_cnt: Gives total IO count, used to load balance the interrupts * @ioc_coredump_loop: will have non-zero value when FW is in CoreDump state + * @timestamp_update_count: Counter to fire timeSync command + * time_sync_interval: Time sync interval read from man page 11 * @high_iops_outstanding: used to load balance the interrupts * within high iops reply queues * @msix_load_balance: Enables load balancing of interrupts across @@ -1308,6 +1318,8 @@ struct MPT3SAS_ADAPTER { MPT3SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds; u32 non_operational_loop; u8 ioc_coredump_loop; + u32 timestamp_update_count; + u32 time_sync_interval; atomic64_t total_io_cnt; atomic64_t high_iops_outstanding; bool msix_load_balance; -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit aec93e8e238512689885c20c1af6e67747850341 upstream. The user can set trigger values in order to collect the IOC's host trace buffer automatically upon detecting certain conditions. However, the trigger values that the user sets are not persistent across system reboot or reload of the driver. In order to make the user trigger settings persistent, these trigger values need to be saved in the IOC's NVRAM pages: - Driver Persistent Trigger Page 0: This page is used to store list of trigger types that are enabled - Driver Persistent Trigger Page 1: This page stores the list of Master triggers that are enabled - Driver Persistent Trigger Page 2: This page stores the list of MPI Event Triggers that are enabled - Driver Persistent Trigger Page 3: This page stores the list of SCSI Sense Triggers that are enabled - Driver Persistent Trigger Page 4: This page stores the list of IOCStatus-LogInfo Triggers that are enabled. Whenever user configures triggers, the driver persists the values in the corresponding trigger pages. When the driver is subsequently reloaded, the driver reads the values from the trigger pages and configures the triggers accordingly. During firmware upload operation, if the newer firmware supports the trigger page feature, then driver persists the configured diag trigger values to NVRAM. Link: https://lore.kernel.org/r/20201126094311.8686-3-suganath-prabu.subramani@bro... Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 70 ++++++++++ drivers/scsi/mpt3sas/mpt3sas_base.h | 5 + drivers/scsi/mpt3sas/mpt3sas_config.c | 134 +++++++++++++++++++ drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h | 94 +++++++++++++ 4 files changed, 303 insertions(+) create mode 100644 drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 37dc537c3c1d..8c91b10c8070 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -975,6 +975,20 @@ _base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) return; + /* + * Older Firmware version doesn't support driver trigger pages. + * So, skip displaying 'config invalid type' type + * of error message. + */ + if (request_hdr->Function == MPI2_FUNCTION_CONFIG) { + Mpi2ConfigRequest_t *rqst = (Mpi2ConfigRequest_t *)request_hdr; + + if ((rqst->ExtPageType == + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER) && + !(ioc->logging_level & MPT_DEBUG_CONFIG)) { + return; + } + } switch (ioc_status) { @@ -4791,6 +4805,58 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) } } +/** + * _base_check_for_trigger_pages_support - checks whether HBA FW supports + * driver trigger pages or not + * @ioc : per adapter object + * + * Returns trigger flags mask if HBA FW supports driver trigger pages, + * otherwise returns EFAULT. + */ +static int +_base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi26DriverTriggerPage0_t trigger_pg0; + int r = 0; + Mpi2ConfigReply_t mpi_reply; + u16 ioc_status; + + r = mpt3sas_config_get_driver_trigger_pg0(ioc, &mpi_reply, + &trigger_pg0); + if (r) + return -EFAULT; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + return -EFAULT; + + return le16_to_cpu(trigger_pg0.TriggerFlags); +} + +/** + * _base_get_diag_triggers - Retrieve diag trigger values from + * persistent pages. + * @ioc : per adapter object + * + * Return nothing. + */ +static void +_base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) +{ + u16 trigger_flags; + + /* + * Default setting of master trigger. + */ + ioc->diag_trigger_master.MasterData = + (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET); + trigger_flags = _base_check_for_trigger_pages_support(ioc); + if (trigger_flags < 0) + return; + ioc->supports_trigger_pages = 1; +} + /** * _base_static_config_pages - static start of day config pages * @ioc: per adapter object @@ -4877,6 +4943,10 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors; if (ioc->is_aero_ioc) _base_update_ioc_page1_inlinewith_perf_mode(ioc); + if (ioc->is_gen35_ioc) { + if (ioc->is_driver_loading) + _base_get_diag_triggers(ioc); + } } /** diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index a250add2797d..78a8239a83d1 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -71,6 +71,7 @@ #include "mpt3sas_debug.h" #include "mpt3sas_trigger_diag.h" +#include "mpt3sas_trigger_pages.h" /* driver versioning info */ #define MPT3SAS_DRIVER_NAME "mpt3sas" @@ -1541,6 +1542,7 @@ struct MPT3SAS_ADAPTER { struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event; struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi; struct SL_WH_MPI_TRIGGERS_T diag_trigger_mpi; + u8 supports_trigger_pages; void *device_remove_in_progress; u16 device_remove_in_progress_sz; u8 is_gen35_ioc; @@ -1821,6 +1823,9 @@ int mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle, u16 *volume_handle); int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle, u64 *wwid); +int +mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page); /* ctl shared API */ extern struct device_attribute *mpt3sas_host_attrs[]; diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 4a0ddc7c95e4..2fa60c2e0b8e 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -1742,6 +1742,140 @@ mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t return r; } +/** + * mpt3sas_config_get_driver_trigger_pg0 - obtain driver trigger page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_driver_trigger_pg0 - write driver trigger page 0 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_set_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 0; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_update_driver_trigger_pg0 - update driver trigger page 0 + * @ioc: per adapter object + * @trigger_flag: trigger type bit map + * @set: set ot clear trigger values + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +static int +mpt3sas_config_update_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, + u16 trigger_flag, bool set) +{ + Mpi26DriverTriggerPage0_t tg_pg0; + Mpi2ConfigReply_t mpi_reply; + int rc; + u16 flags, ioc_status; + + rc = mpt3sas_config_get_driver_trigger_pg0(ioc, &mpi_reply, &tg_pg0); + if (rc) + return rc; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg0, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return -EFAULT; + } + + if (set) + flags = le16_to_cpu(tg_pg0.TriggerFlags) | trigger_flag; + else + flags = le16_to_cpu(tg_pg0.TriggerFlags) & ~trigger_flag; + + tg_pg0.TriggerFlags = cpu_to_le16(flags); + + rc = _config_set_driver_trigger_pg0(ioc, &mpi_reply, &tg_pg0); + if (rc) + return rc; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to update trigger pg0, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return -EFAULT; + } + + return 0; +} + /** * mpt3sas_config_get_volume_handle - returns volume handle for give hidden * raid components diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h new file mode 100644 index 000000000000..5f3328f011a2 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +/* + * This is the Fusion MPT base driver providing common API layer interface + * to store diag trigger values into persistent driver triggers pages + * for MPT (Message Passing Technology) based controllers. + * + * Copyright (C) 2020 Broadcom Inc. + * + * Authors: Broadcom Inc. + * Sreekanth Reddy <sreekanth.reddy@broadcom.com> + * + * Send feedback to : MPT-FusionLinux.pdl@broadcom.com) + */ + +#include "mpi/mpi2_cnfg.h" + +#ifndef MPI2_TRIGGER_PAGES_H +#define MPI2_TRIGGER_PAGES_H + +#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER (0xE0) +#define MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION (0x01) +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 TriggerFlags; /* 0x08 */ + U16 Reserved0xA; /* 0x0A */ + U32 Reserved0xC[61]; /* 0x0C */ +} _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0, Mpi26DriverTriggerPage0_t; + +/* Trigger Flags */ +#define MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID (0x0001) +#define MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID (0x0002) +#define MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID (0x0004) +#define MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID (0x0008) + +#define MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION (0x01) +typedef struct _MPI26_DRIVER_MASTER_TIGGER_ENTRY { + U32 MasterTriggerFlags; +} MPI26_DRIVER_MASTER_TIGGER_ENTRY; + +#define MPI26_MAX_MASTER_TRIGGERS (1) +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 NumMasterTrigger; /* 0x08 */ + U16 Reserved0xA; /* 0x0A */ + MPI26_DRIVER_MASTER_TIGGER_ENTRY MasterTriggers[MPI26_MAX_MASTER_TRIGGERS]; /* 0x0C */ +} MPI26_CONFIG_PAGE_DRIVER_TIGGER_1, Mpi26DriverTriggerPage1_t; + +#define MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION (0x01) +typedef struct _MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY { + U16 MPIEventCode; /* 0x00 */ + U16 MPIEventCodeSpecific; /* 0x02 */ +} MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY; + +#define MPI26_MAX_MPI_EVENT_TRIGGERS (20) +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 NumMPIEventTrigger; /* 0x08 */ + U16 Reserved0xA; /* 0x0A */ + MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY MPIEventTriggers[MPI26_MAX_MPI_EVENT_TRIGGERS]; /* 0x0C */ +} MPI26_CONFIG_PAGE_DRIVER_TIGGER_2, Mpi26DriverTriggerPage2_t; + +#define MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION (0x01) +typedef struct _MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY { + U8 ASCQ; /* 0x00 */ + U8 ASC; /* 0x01 */ + U8 SenseKey; /* 0x02 */ + U8 Reserved; /* 0x03 */ +} MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY; + +#define MPI26_MAX_SCSI_SENSE_TRIGGERS (20) +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_3 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 NumSCSISenseTrigger; /* 0x08 */ + U16 Reserved0xA; /* 0x0A */ + MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY SCSISenseTriggers[MPI26_MAX_SCSI_SENSE_TRIGGERS]; /* 0x0C */ +} MPI26_CONFIG_PAGE_DRIVER_TIGGER_3, Mpi26DriverTriggerPage3_t; + +#define MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION (0x01) +typedef struct _MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY { + U16 IOCStatus; /* 0x00 */ + U16 Reserved; /* 0x02 */ + U32 LogInfo; /* 0x04 */ +} MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY; + +#define MPI26_MAX_LOGINFO_TRIGGERS (20) +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_4 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 NumIOCStatusLogInfoTrigger; /* 0x08 */ + U16 Reserved0xA; /* 0x0A */ + MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY IOCStatusLoginfoTriggers[MPI26_MAX_LOGINFO_TRIGGERS]; /* 0x0C */ +} MPI26_CONFIG_PAGE_DRIVER_TIGGER_4, Mpi26DriverTriggerPage4_t; + +#endif -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit bb855f2a5d7eb8f270eb30fda9b2b87cd682212c upstream. Trigger Page 1 is used to store information about Master triggers. Below are the Master trigger conditions: Bit[3] Trigger condition for Device Removal event Bit[2] Trigger condition for TM command issued by driver Bit[1] Trigger condition for Adapter reset issued by driver Bit[0] Trigger condition for IOC Fault state During driver load, if Master trigger type bit is enabled in the Persistent Trigger Page0, then read the Persistent Trigger Page1 and update the IOC instance's diag_trigger_master.MasterData with Persistent Trigger Page1's MasterTriggerFlags. Link: https://lore.kernel.org/r/20201126094311.8686-4-suganath-prabu.subramani@bro... Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 46 ++++++++ drivers/scsi/mpt3sas/mpt3sas_base.h | 6 + drivers/scsi/mpt3sas/mpt3sas_config.c | 151 ++++++++++++++++++++++++++ 3 files changed, 203 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 8c91b10c8070..ddacec456c42 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4805,6 +4805,42 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) } } +/** + * _base_get_master_diag_triggers - get master diag trigger values from + * persistent pages + * @ioc : per adapter object + * + * Return nothing. + */ +static void +_base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi26DriverTriggerPage1_t trigger_pg1; + Mpi2ConfigReply_t mpi_reply; + int r; + u16 ioc_status; + + r = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply, + &trigger_pg1); + if (r) + return; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dinitprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return; + } + + if (le16_to_cpu(trigger_pg1.NumMasterTrigger)) + ioc->diag_trigger_master.MasterData |= + le32_to_cpu( + trigger_pg1.MasterTriggers[0].MasterTriggerFlags); +} + /** * _base_check_for_trigger_pages_support - checks whether HBA FW supports * driver trigger pages or not @@ -4851,10 +4887,20 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) */ ioc->diag_trigger_master.MasterData = (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET); + trigger_flags = _base_check_for_trigger_pages_support(ioc); if (trigger_flags < 0) return; + ioc->supports_trigger_pages = 1; + + /* + * Retrieve master diag trigger values from driver trigger pg1 + * if master trigger bit enabled in TriggerFlags. + */ + if ((u16)trigger_flags & + MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID) + _base_get_master_diag_triggers(ioc); } /** diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 78a8239a83d1..eb03aaa33aae 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1826,6 +1826,12 @@ int mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, int mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage0_t *config_page); +int +mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page); +int +mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set); /* ctl shared API */ extern struct device_attribute *mpt3sas_host_attrs[]; diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 2fa60c2e0b8e..9eff6fd3055f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -1876,6 +1876,157 @@ mpt3sas_config_update_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, return 0; } +/** + * mpt3sas_config_get_driver_trigger_pg1 - obtain driver trigger page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_driver_trigger_pg1 - write driver trigger page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_set_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 1; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_update_driver_trigger_pg1 - update driver trigger page 1 + * @ioc: per adapter object + * @master_tg: Master trigger bit map + * @set: set ot clear trigger values + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set) +{ + Mpi26DriverTriggerPage1_t tg_pg1; + Mpi2ConfigReply_t mpi_reply; + int rc; + u16 ioc_status; + + rc = mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID, set); + if (rc) + return rc; + + rc = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply, &tg_pg1); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + if (set) { + tg_pg1.NumMasterTrigger = cpu_to_le16(1); + tg_pg1.MasterTriggers[0].MasterTriggerFlags = cpu_to_le32( + master_tg->MasterData); + } else { + tg_pg1.NumMasterTrigger = 0; + tg_pg1.MasterTriggers[0].MasterTriggerFlags = 0; + } + + rc = _config_set_driver_trigger_pg1(ioc, &mpi_reply, &tg_pg1); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + return 0; + +out: + mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID, !set); + + return rc; +} + /** * mpt3sas_config_get_volume_handle - returns volume handle for give hidden * raid components -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 71b3fb8fe6dd6e8e8c296653e45ed6f1817e6dfc upstream. Trigger Page2 is used to store information about Event triggers: 31 24 23 16 15 8 7 0 Byte ----------------------------------------------- |PageType |PageNumber |Reserved |PageVersion| 0x00 ----------------------------------------------- |Reserved |ExtPageType | ExtPageLength | 0x04 ----------------------------------------------- | Reserved | NumMPIEventTriggers | 0x08 ----------------------------------------------- | MPIEventTriggerEntries | 0x0C | | 0xFC ----------------------------------------------- Number of MPI Event Trigger Entries currently stored in this page. If this is set to zero, there are no valid MPI-Event-Trigger entries available in this page. MPIEventTriggerEntry: - MPIEventCode [15:00] MPI Event code specified in MPI-Spec - MPIEventCodeSpecific [16:31] For Event Code “MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)”, this field specifies the Log-Entry-Qualifier. For all other Event Codes, this field is reserved and not used Maximum of 20-event trigger entries can be stored in this page. Link: https://lore.kernel.org/r/20201126094311.8686-5-suganath-prabu.subramani@bro... Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 60 ++++++++++ drivers/scsi/mpt3sas/mpt3sas_base.h | 6 + drivers/scsi/mpt3sas/mpt3sas_config.c | 160 ++++++++++++++++++++++++++ 3 files changed, 226 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index ddacec456c42..ac3c4a8e3588 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4805,6 +4805,57 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) } } +/** + * _base_get_event_diag_triggers - get event diag trigger values from + * persistent pages + * @ioc : per adapter object + * + * Return nothing. + */ +static void +_base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi26DriverTriggerPage2_t trigger_pg2; + struct SL_WH_EVENT_TRIGGER_T *event_tg; + MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY *mpi_event_tg; + Mpi2ConfigReply_t mpi_reply; + int r = 0, i = 0; + u16 count = 0; + u16 ioc_status; + + r = mpt3sas_config_get_driver_trigger_pg2(ioc, &mpi_reply, + &trigger_pg2); + if (r) + return; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dinitprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return; + } + + if (le16_to_cpu(trigger_pg2.NumMPIEventTrigger)) { + count = le16_to_cpu(trigger_pg2.NumMPIEventTrigger); + count = min_t(u16, NUM_VALID_ENTRIES, count); + ioc->diag_trigger_event.ValidEntries = count; + + event_tg = &ioc->diag_trigger_event.EventTriggerEntry[0]; + mpi_event_tg = &trigger_pg2.MPIEventTriggers[0]; + for (i = 0; i < count; i++) { + event_tg->EventValue = le16_to_cpu( + mpi_event_tg->MPIEventCode); + event_tg->LogEntryQualifier = le16_to_cpu( + mpi_event_tg->MPIEventCodeSpecific); + event_tg++; + mpi_event_tg++; + } + } +} + /** * _base_get_master_diag_triggers - get master diag trigger values from * persistent pages @@ -4901,6 +4952,15 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) if ((u16)trigger_flags & MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID) _base_get_master_diag_triggers(ioc); + + /* + * Retrieve event diag trigger values from driver trigger pg2 + * if event trigger bit enabled in TriggerFlags. + */ + if ((u16)trigger_flags & + MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID) + _base_get_event_diag_triggers(ioc); + } /** diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index eb03aaa33aae..453dc2cec1ea 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1830,8 +1830,14 @@ int mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page); int +mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page); +int mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set); +int +mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set); /* ctl shared API */ extern struct device_attribute *mpt3sas_host_attrs[]; diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 9eff6fd3055f..9bad6a8a8893 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -2027,6 +2027,166 @@ mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, return rc; } +/** + * mpt3sas_config_get_driver_trigger_pg2 - obtain driver trigger page 2 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 2; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_driver_trigger_pg2 - write driver trigger page 2 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_set_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 2; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_update_driver_trigger_pg2 - update driver trigger page 2 + * @ioc: per adapter object + * @event_tg: list of Event Triggers + * @set: set ot clear trigger values + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set) +{ + Mpi26DriverTriggerPage2_t tg_pg2; + Mpi2ConfigReply_t mpi_reply; + int rc, i, count; + u16 ioc_status; + + rc = mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID, set); + if (rc) + return rc; + + rc = mpt3sas_config_get_driver_trigger_pg2(ioc, &mpi_reply, &tg_pg2); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + if (set) { + count = event_tg->ValidEntries; + tg_pg2.NumMPIEventTrigger = cpu_to_le16(count); + for (i = 0; i < count; i++) { + tg_pg2.MPIEventTriggers[i].MPIEventCode = + cpu_to_le16( + event_tg->EventTriggerEntry[i].EventValue); + tg_pg2.MPIEventTriggers[i].MPIEventCodeSpecific = + cpu_to_le16( + event_tg->EventTriggerEntry[i].LogEntryQualifier); + } + } else { + tg_pg2.NumMPIEventTrigger = 0; + memset(&tg_pg2.MPIEventTriggers[0], 0, + NUM_VALID_ENTRIES * sizeof( + MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY)); + } + + rc = _config_set_driver_trigger_pg2(ioc, &mpi_reply, &tg_pg2); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + return 0; + +out: + mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID, !set); + + return rc; +} + /** * mpt3sas_config_get_volume_handle - returns volume handle for give hidden * raid components -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 2a5c3a35c156efc9991dd3b9e46b1cc2653baa63 upstream. Trigger Page3 is used to store information about SCSI Sense triggers: Persistent Trigger Page-3 ------------------------------------------------------------------ | 31 24 23 16 15 8 7 0| Byte ------------------------------------------------------------------ | PageType | PageNumber | Reserved | PageVersion | 0x00 ------------------------------------------------------------------ | Reserved | ExtPageType | ExtPageLen | 0x04 ------------------------------------------------------------------ | Reserved | NumScsiSense | TriggerEntries | 0x08 ------------------------------------------------------------------ | ScsiSenseTriggerEntry[0] | 0x0C ------------------------------------------------------------------ | … … | ------------------------------------------------------------------ | ScsiSenseTriggerEntry[19] | 0x58 ------------------------------------------------------------------ NumScsiSenseTriggerEntries: This field indicates number of SCSI Sense trigger entries stored in this page. Currently driver is supporting a maximum of 20-SCSI Sense trigger entries. ScsiSenseTriggerEntry: ----------------------------------------------- | 31 24 23 16 15 8 7 0 | ----------------------------------------------- | Reserved | SenseKey | ASC | ASCQ | ----------------------------------------------- ASCQ => Additional Sense Code Qualifier ASC => Additional Sense Code SenseKey => Sense Key values ASCQ => Additional Sense Code Qualifier ASC => Additional Sense Code SenseKey => Sense Key values Link: https://lore.kernel.org/r/20201126094311.8686-6-suganath-prabu.subramani@bro... Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 59 ++++++++++ drivers/scsi/mpt3sas/mpt3sas_base.h | 6 + drivers/scsi/mpt3sas/mpt3sas_config.c | 157 ++++++++++++++++++++++++++ 3 files changed, 222 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index ac3c4a8e3588..55c7de972992 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4856,6 +4856,57 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) } } +/** + * _base_get_scsi_diag_triggers - get scsi diag trigger values from + * persistent pages + * @ioc : per adapter object + * + * Return nothing. + */ +static void +_base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi26DriverTriggerPage3_t trigger_pg3; + struct SL_WH_SCSI_TRIGGER_T *scsi_tg; + MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY *mpi_scsi_tg; + Mpi2ConfigReply_t mpi_reply; + int r = 0, i = 0; + u16 count = 0; + u16 ioc_status; + + r = mpt3sas_config_get_driver_trigger_pg3(ioc, &mpi_reply, + &trigger_pg3); + if (r) + return; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dinitprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return; + } + + if (le16_to_cpu(trigger_pg3.NumSCSISenseTrigger)) { + count = le16_to_cpu(trigger_pg3.NumSCSISenseTrigger); + count = min_t(u16, NUM_VALID_ENTRIES, count); + ioc->diag_trigger_scsi.ValidEntries = count; + + scsi_tg = &ioc->diag_trigger_scsi.SCSITriggerEntry[0]; + mpi_scsi_tg = &trigger_pg3.SCSISenseTriggers[0]; + for (i = 0; i < count; i++) { + scsi_tg->ASCQ = mpi_scsi_tg->ASCQ; + scsi_tg->ASC = mpi_scsi_tg->ASC; + scsi_tg->SenseKey = mpi_scsi_tg->SenseKey; + + scsi_tg++; + mpi_scsi_tg++; + } + } +} + /** * _base_get_master_diag_triggers - get master diag trigger values from * persistent pages @@ -4961,6 +5012,14 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID) _base_get_event_diag_triggers(ioc); + /* + * Retrieve scsi diag trigger values from driver trigger pg3 + * if scsi trigger bit enabled in TriggerFlags. + */ + if ((u16)trigger_flags & + MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID) + _base_get_scsi_diag_triggers(ioc); + } /** diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 453dc2cec1ea..0aa275d817dc 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1833,11 +1833,17 @@ int mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page); int +mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page); +int mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set); int mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set); +int +mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set); /* ctl shared API */ extern struct device_attribute *mpt3sas_host_attrs[]; diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 9bad6a8a8893..ae1caba662f3 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -2187,6 +2187,163 @@ mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, return rc; } +/** + * mpt3sas_config_get_driver_trigger_pg3 - obtain driver trigger page 3 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 3; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_driver_trigger_pg3 - write driver trigger page 3 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_set_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 3; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_update_driver_trigger_pg3 - update driver trigger page 3 + * @ioc: per adapter object + * @scsi_tg: scsi trigger list + * @set: set ot clear trigger values + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set) +{ + Mpi26DriverTriggerPage3_t tg_pg3; + Mpi2ConfigReply_t mpi_reply; + int rc, i, count; + u16 ioc_status; + + rc = mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID, set); + if (rc) + return rc; + + rc = mpt3sas_config_get_driver_trigger_pg3(ioc, &mpi_reply, &tg_pg3); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return -EFAULT; + } + + if (set) { + count = scsi_tg->ValidEntries; + tg_pg3.NumSCSISenseTrigger = cpu_to_le16(count); + for (i = 0; i < count; i++) { + tg_pg3.SCSISenseTriggers[i].ASCQ = + scsi_tg->SCSITriggerEntry[i].ASCQ; + tg_pg3.SCSISenseTriggers[i].ASC = + scsi_tg->SCSITriggerEntry[i].ASC; + tg_pg3.SCSISenseTriggers[i].SenseKey = + scsi_tg->SCSITriggerEntry[i].SenseKey; + } + } else { + tg_pg3.NumSCSISenseTrigger = 0; + memset(&tg_pg3.SCSISenseTriggers[0], 0, + NUM_VALID_ENTRIES * sizeof( + MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY)); + } + + rc = _config_set_driver_trigger_pg3(ioc, &mpi_reply, &tg_pg3); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return -EFAULT; + } + + return 0; +out: + mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID, !set); + + return rc; +} + /** * mpt3sas_config_get_volume_handle - returns volume handle for give hidden * raid components -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 0e17a87c5950b91aa5ed11ba569b46dea13b1e0d upstream. This page is used to store information about MPI (IOC Status & LogInfo) triggers. Driver Persistent Trigger Page-4 format: ------------------------------------------------------- | 31 24 23 16 15 8 7 0| Byte ------------------------------------------------------- | PageType | PageNumber | Reserved | PageVersion | 0x00 -------------------------------------------------------- | Reserved | ExtPageType | ExtPageLength | 0x04 -------------------------------------------------------- | Reserved | NumMpiTriggerEntries | 0x08 -------------------------------------------------------- | MPITriggerEntry[0] | 0x0C -------------------------------------------------------- | … | -------------------------------------------------------- | MPITriggerEntry[19] | 0xA4 -------------------------------------------------------- NumMpiTriggerEntries: This field indicates number of MPI (IOC Status & LogInfo) trigger entries stored in this page. Currently driver is supporting a maximum of 20-MPI trigger entries. MPITriggerEntry: ----------------------------------------------------- | 31 16 15 0 | ----------------------------------------------------- | Reserved | IOCStatus | ----------------------------------------------------- | IOCLogInfo | ----------------------------------------------------- IOCStatus => Status value from the IOC IOCLogInfo => Specific value that supplements the IOCStatus. Link: https://lore.kernel.org/r/20201126094311.8686-7-suganath-prabu.subramani@bro... Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 61 +++++++++- drivers/scsi/mpt3sas/mpt3sas_base.h | 6 + drivers/scsi/mpt3sas/mpt3sas_config.c | 158 ++++++++++++++++++++++++++ 3 files changed, 224 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 55c7de972992..732fe3ac29ef 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4907,6 +4907,59 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) } } +/** + * _base_get_mpi_diag_triggers - get mpi diag trigger values from + * persistent pages + * @ioc : per adapter object + * + * Return nothing. + */ +static void +_base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi26DriverTriggerPage4_t trigger_pg4; + struct SL_WH_MPI_TRIGGER_T *status_tg; + MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY *mpi_status_tg; + Mpi2ConfigReply_t mpi_reply; + int r = 0, i = 0; + u16 count = 0; + u16 ioc_status; + + r = mpt3sas_config_get_driver_trigger_pg4(ioc, &mpi_reply, + &trigger_pg4); + if (r) + return; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dinitprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n", + __func__, ioc_status)); + return; + } + + if (le16_to_cpu(trigger_pg4.NumIOCStatusLogInfoTrigger)) { + count = le16_to_cpu(trigger_pg4.NumIOCStatusLogInfoTrigger); + count = min_t(u16, NUM_VALID_ENTRIES, count); + ioc->diag_trigger_mpi.ValidEntries = count; + + status_tg = &ioc->diag_trigger_mpi.MPITriggerEntry[0]; + mpi_status_tg = &trigger_pg4.IOCStatusLoginfoTriggers[0]; + + for (i = 0; i < count; i++) { + status_tg->IOCStatus = le16_to_cpu( + mpi_status_tg->IOCStatus); + status_tg->IocLogInfo = le32_to_cpu( + mpi_status_tg->LogInfo); + + status_tg++; + mpi_status_tg++; + } + } +} + /** * _base_get_master_diag_triggers - get master diag trigger values from * persistent pages @@ -5019,7 +5072,13 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) if ((u16)trigger_flags & MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID) _base_get_scsi_diag_triggers(ioc); - + /* + * Retrieve mpi error diag trigger values from driver trigger pg4 + * if loginfo trigger bit enabled in TriggerFlags. + */ + if ((u16)trigger_flags & + MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID) + _base_get_mpi_diag_triggers(ioc); } /** diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 0aa275d817dc..3304b0e5171f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1836,6 +1836,9 @@ int mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage3_t *config_page); int +mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page); +int mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set); int @@ -1844,6 +1847,9 @@ mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, int mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, struct SL_WH_SCSI_TRIGGERS_T *scsi_tg, bool set); +int +mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_MPI_TRIGGERS_T *mpi_tg, bool set); /* ctl shared API */ extern struct device_attribute *mpt3sas_host_attrs[]; diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index ae1caba662f3..8238843523b5 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -2344,6 +2344,164 @@ mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, return rc; } +/** + * mpt3sas_config_get_driver_trigger_pg4 - obtain driver trigger page 4 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 4; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_set_driver_trigger_pg4 - write driver trigger page 4 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +static int +_config_set_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage4_t *config_page) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = + MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER; + mpi_request.Header.PageNumber = 4; + mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; + _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + sizeof(*config_page)); + out: + return r; +} + +/** + * mpt3sas_config_update_driver_trigger_pg4 - update driver trigger page 4 + * @ioc: per adapter object + * @mpi_tg: mpi trigger list + * @set: set ot clear trigger values + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, + struct SL_WH_MPI_TRIGGERS_T *mpi_tg, bool set) +{ + Mpi26DriverTriggerPage4_t tg_pg4; + Mpi2ConfigReply_t mpi_reply; + int rc, i, count; + u16 ioc_status; + + rc = mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID, set); + if (rc) + return rc; + + rc = mpt3sas_config_get_driver_trigger_pg4(ioc, &mpi_reply, &tg_pg4); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + if (set) { + count = mpi_tg->ValidEntries; + tg_pg4.NumIOCStatusLogInfoTrigger = cpu_to_le16(count); + for (i = 0; i < count; i++) { + tg_pg4.IOCStatusLoginfoTriggers[i].IOCStatus = + cpu_to_le16(mpi_tg->MPITriggerEntry[i].IOCStatus); + tg_pg4.IOCStatusLoginfoTriggers[i].LogInfo = + cpu_to_le32(mpi_tg->MPITriggerEntry[i].IocLogInfo); + } + } else { + tg_pg4.NumIOCStatusLogInfoTrigger = 0; + memset(&tg_pg4.IOCStatusLoginfoTriggers[0], 0, + NUM_VALID_ENTRIES * sizeof( + MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY)); + } + + rc = _config_set_driver_trigger_pg4(ioc, &mpi_reply, &tg_pg4); + if (rc) + goto out; + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + dcprintk(ioc, + ioc_err(ioc, + "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n", + __func__, ioc_status)); + rc = -EFAULT; + goto out; + } + + return 0; + +out: + mpt3sas_config_update_driver_trigger_pg0(ioc, + MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID, !set); + + return rc; +} + /** * mpt3sas_config_get_volume_handle - returns volume handle for give hidden * raid components -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 9b271c69128b46e2735df732819c5a5b1f4252af upstream. If a firmware update adds support for the trigger pages, then the driver should handle this by writing the existing trigger data from the driver's internal data structure to the corresponding trigger pages in NVRAM. Also handle the case where the trigger page capability is no longer present after a firmware downgrade. Link: https://lore.kernel.org/r/20201126094311.8686-8-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 50 ++++++++++++++++++++++++++++- 1 file changed, 49 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 732fe3ac29ef..f63e14f31e8b 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5081,6 +5081,35 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) _base_get_mpi_diag_triggers(ioc); } +/** + * _base_update_diag_trigger_pages - Update the driver trigger pages after + * online FW update, incase updated FW supports driver + * trigger pages. + * @ioc : per adapter object + * + * Return nothing. + */ +static void +_base_update_diag_trigger_pages(struct MPT3SAS_ADAPTER *ioc) +{ + + if (ioc->diag_trigger_master.MasterData) + mpt3sas_config_update_driver_trigger_pg1(ioc, + &ioc->diag_trigger_master, 1); + + if (ioc->diag_trigger_event.ValidEntries) + mpt3sas_config_update_driver_trigger_pg2(ioc, + &ioc->diag_trigger_event, 1); + + if (ioc->diag_trigger_scsi.ValidEntries) + mpt3sas_config_update_driver_trigger_pg3(ioc, + &ioc->diag_trigger_scsi, 1); + + if (ioc->diag_trigger_mpi.ValidEntries) + mpt3sas_config_update_driver_trigger_pg4(ioc, + &ioc->diag_trigger_mpi, 1); +} + /** * _base_static_config_pages - static start of day config pages * @ioc: per adapter object @@ -5090,7 +5119,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) { Mpi2ConfigReply_t mpi_reply; u32 iounit_pg1_flags; - + int tg_flags = 0; ioc->nvme_abort_timeout = 30; mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); if (ioc->ir_firmware) @@ -5170,6 +5199,25 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) if (ioc->is_gen35_ioc) { if (ioc->is_driver_loading) _base_get_diag_triggers(ioc); + else { + /* + * In case of online HBA FW update operation, + * check whether updated FW supports the driver trigger + * pages or not. + * - If previous FW has not supported driver trigger + * pages and newer FW supports them then update these + * pages with current diag trigger values. + * - If previous FW has supported driver trigger pages + * and new FW doesn't support them then disable + * support_trigger_pages flag. + */ + tg_flags = _base_check_for_trigger_pages_support(ioc); + if (!ioc->supports_trigger_pages && tg_flags != -EFAULT) + _base_update_diag_trigger_pages(ioc); + else if (ioc->supports_trigger_pages && + tg_flags == -EFAULT) + ioc->supports_trigger_pages = 0; + } } } -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit be1b500212541a70006887bae558ff834d7365d0 upstream. Update driver version to 36.100.00.00 Link: https://lore.kernel.org/r/20201126094311.8686-9-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 3304b0e5171f..9c2d7532b713 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -77,9 +77,9 @@ #define MPT3SAS_DRIVER_NAME "mpt3sas" #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "35.101.00.00" -#define MPT3SAS_MAJOR_VERSION 35 -#define MPT3SAS_MINOR_VERSION 101 +#define MPT3SAS_DRIVER_VERSION "36.100.00.00" +#define MPT3SAS_MAJOR_VERSION 36 +#define MPT3SAS_MINOR_VERSION 100 #define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 -- 2.33.0
From: Dan Carpenter <dan.carpenter@oracle.com> Commit 8b3c8035297e71abb9e6d0f50ceab50d33c0d64b upstream. The "trigger_flags" variable needs to be signed for the error checking to work. Link: https://lore.kernel.org/r/X9DZH37bYPHwSQRP@mwanda Fixes: aec93e8e2385 ("scsi: mpt3sas: Add persistent trigger pages support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index f63e14f31e8b..64993f9d623e 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5035,7 +5035,7 @@ _base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc) static void _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { - u16 trigger_flags; + int trigger_flags; /* * Default setting of master trigger. -- 2.33.0
From: Colin Ian King <colin.king@canonical.com> Commit 39718fe7adb1a79f78be23f058299bc038cbe161 upstream. There is a spelling mistake in the Kconfig help text. Fix it. Link: https://lore.kernel.org/r/20201217172019.57768-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig index 86209455172d..c299f7e078fb 100644 --- a/drivers/scsi/mpt3sas/Kconfig +++ b/drivers/scsi/mpt3sas/Kconfig @@ -79,5 +79,5 @@ config SCSI_MPT2SAS select SCSI_MPT3SAS depends on PCI && SCSI help - Dummy config option for backwards compatiblity: configure the MPT3SAS + Dummy config option for backwards compatibility: configure the MPT3SAS driver instead. -- 2.33.0
From: YANG LI <abaci-bugfix@linux.alibaba.com> Commit bfb3f00c0613bf912771278422685c5409963bda upstream. Fix the following coccicheck warning: ./drivers/scsi/mpt3sas/mpt3sas_base.c:2424:5-20: WARNING: Comparison of 0/1 to bool variable Link: https://lore.kernel.org/r/1610355253-25960-1-git-send-email-abaci-bugfix@lin... Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 64993f9d623e..f4d19b0bec23 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2506,8 +2506,8 @@ _base_check_pcie_native_sgl(struct MPT3SAS_ADAPTER *ioc, } /* Check if we need to build a native SG list. */ - if (base_is_prp_possible(ioc, pcie_device, - scmd, sges_left) == 0) { + if (!base_is_prp_possible(ioc, pcie_device, + scmd, sges_left)) { /* We built a native SG list, just return. */ goto out; } -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit d309ae07327d19ce613629a0535e9a11a8ff5127 upstream. Currently the driver allocates memory for ReplyPostFree queues in chunks of 16. In resource constrained environments--such as VM with 1 GB RAM and 2 CPUs--memory allocation for ReplyPostFree pools may fail because the driver tries to allocate a memory for 16 ReplyPostFree queues even though the actual number needed is 2. Change the driver to allocate memory for only the actual number of queues needed if the ReplyPostFree queue count is less than 16. Link: https://lore.kernel.org/r/20210201141522.25363-1-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index f4d19b0bec23..81ff49757495 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5642,7 +5642,8 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) reply_post_free_sz = ioc->reply_post_queue_depth * sizeof(Mpi2DefaultReplyDescriptor_t); rdpq_sz = reply_post_free_sz * RDPQ_MAX_INDEX_IN_ONE_CHUNK; - if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable) + if ((_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable) + || (ioc->reply_queue_count < RDPQ_MAX_INDEX_IN_ONE_CHUNK)) rdpq_sz = reply_post_free_sz * ioc->reply_queue_count; ret = base_alloc_rdpq_dma_pool(ioc, rdpq_sz); if (ret == -EAGAIN) { -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 664f0dce20580837c7fa136a03b3a9fc43034104 upstream. MPT Fusion adapters can steer completions to individual queues and we now have support for shared host-wide tags in the I/O stack. The addition of the host-wide tags allows us to enable multiqueue support for MPT Fusion adapters. Once host-wise tags are enabled, the CPU hotplug feature is also supported. Allow use of host-wide tags to be disabled through the "host_tagset_enable" module parameter. Once we do not have any major performance regressions using host-wide tags, we will drop the hand-crafted interrupt affinity settings. Performance is meeting expectations. About 3.1M IOPS using 24 Drive SSD on Aero controllers. Link: https://lore.kernel.org/r/20210202095832.23072-1-sreekanth.reddy@broadcom.co... Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 50 ++++++++++++++++++---------- drivers/scsi/mpt3sas/mpt3sas_base.h | 1 + drivers/scsi/mpt3sas/mpt3sas_scsih.c | 42 ++++++++++++++++++++++- 3 files changed, 75 insertions(+), 18 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 81ff49757495..d4064a0ddd57 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -3649,25 +3649,16 @@ _base_get_msix_index(struct MPT3SAS_ADAPTER *ioc, base_mod64(atomic64_add_return(1, &ioc->total_io_cnt), ioc->reply_queue_count) : 0; - return ioc->cpu_msix_table[raw_smp_processor_id()]; -} + if (scmd && ioc->shost->nr_hw_queues > 1) { + u32 tag = blk_mq_unique_tag(scmd->request); -/** - * _base_sdev_nr_inflight_request -get number of inflight requests - * of a request queue. - * @q: request_queue object - * - * returns number of inflight request of a request queue. - */ -inline unsigned long -_base_sdev_nr_inflight_request(struct request_queue *q) -{ - struct blk_mq_hw_ctx *hctx = q->queue_hw_ctx[0]; + return blk_mq_unique_tag_to_hwq(tag) + + ioc->high_iops_queues; + } - return atomic_read(&hctx->nr_active); + return ioc->cpu_msix_table[raw_smp_processor_id()]; } - /** * _base_get_high_iops_msix_index - get the msix index of * high iops queues @@ -3687,7 +3678,8 @@ _base_get_high_iops_msix_index(struct MPT3SAS_ADAPTER *ioc, * reply queues in terms of batch count 16 when outstanding * IOs on the target device is >=8. */ - if (_base_sdev_nr_inflight_request(scmd->device->request_queue) > + + if (atomic_read(&scmd->device->device_busy) > MPT3SAS_DEVICE_HIGH_IOPS_DEPTH) return base_mod64(( atomic64_add_return(1, &ioc->high_iops_outstanding) / @@ -3740,8 +3732,23 @@ mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, struct scsi_cmnd *scmd) { struct scsiio_tracker *request = scsi_cmd_priv(scmd); - unsigned int tag = scmd->request->tag; u16 smid; + u32 tag, unique_tag; + + unique_tag = blk_mq_unique_tag(scmd->request); + tag = blk_mq_unique_tag_to_tag(unique_tag); + + /* + * Store hw queue number corresponding to the tag. + * This hw queue number is used later to determine + * the unique_tag using the logic below. This unique_tag + * is used to retrieve the scmd pointer corresponding + * to tag using scsi_host_find_tag() API. + * + * tag = smid - 1; + * unique_tag = ioc->io_queue_num[tag] << BLK_MQ_UNIQUE_TAG_BITS | tag; + */ + ioc->io_queue_num[tag] = blk_mq_unique_tag_to_hwq(unique_tag); smid = tag + 1; request->cb_idx = cb_idx; @@ -3832,6 +3839,7 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid) mpt3sas_base_clear_st(ioc, st); _base_recovery_check(ioc); + ioc->io_queue_num[smid - 1] = 0; return; } @@ -5363,6 +5371,9 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) kfree(ioc->chain_lookup); ioc->chain_lookup = NULL; } + + kfree(ioc->io_queue_num); + ioc->io_queue_num = NULL; } /** @@ -5774,6 +5785,11 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "internal(0x%p): depth(%d), start smid(%d)\n", ioc->internal, ioc->internal_depth, ioc->internal_smid)); + + ioc->io_queue_num = kcalloc(ioc->scsiio_depth, + sizeof(u16), GFP_KERNEL); + if (!ioc->io_queue_num) + goto out; /* * The number of NVMe page sized blocks needed is: * (((sg_tablesize * 8) - 1) / (page_size - 8)) + 1 diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 9c2d7532b713..36854414d627 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1439,6 +1439,7 @@ struct MPT3SAS_ADAPTER { spinlock_t scsi_lookup_lock; int pending_io_count; wait_queue_head_t reset_wq; + u16 *io_queue_num; /* PCIe SGL */ struct dma_pool *pcie_sgl_dma_pool; diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 13ad1b66420d..422f6323f324 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -54,6 +54,7 @@ #include <linux/interrupt.h> #include <linux/aer.h> #include <linux/raid_class.h> +#include <linux/blk-mq-pci.h> #include <asm/unaligned.h> #include "mpt3sas_base.h" @@ -168,6 +169,11 @@ MODULE_PARM_DESC(multipath_on_hba, "\t SAS 2.0 & SAS 3.0 HBA - This will be disabled,\n\t\t" "\t SAS 3.5 HBA - This will be enabled)"); +static int host_tagset_enable = 1; +module_param(host_tagset_enable, int, 0444); +MODULE_PARM_DESC(host_tagset_enable, + "Shared host tagset enable/disable Default: enable(1)"); + /* raid transport support */ static struct raid_template *mpt3sas_raid_template; static struct raid_template *mpt2sas_raid_template; @@ -1743,10 +1749,12 @@ mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, u16 smid) struct scsi_cmnd *scmd = NULL; struct scsiio_tracker *st; Mpi25SCSIIORequest_t *mpi_request; + u16 tag = smid - 1; if (smid > 0 && smid <= ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT) { - u32 unique_tag = smid - 1; + u32 unique_tag = + ioc->io_queue_num[tag] << BLK_MQ_UNIQUE_TAG_BITS | tag; mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); @@ -11629,6 +11637,22 @@ scsih_scan_finished(struct Scsi_Host *shost, unsigned long time) return 1; } +/** + * scsih_map_queues - map reply queues with request queues + * @shost: SCSI host pointer + */ +static int scsih_map_queues(struct Scsi_Host *shost) +{ + struct MPT3SAS_ADAPTER *ioc = + (struct MPT3SAS_ADAPTER *)shost->hostdata; + + if (ioc->shost->nr_hw_queues == 1) + return 0; + + return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT], + ioc->pdev, ioc->high_iops_queues); +} + /* shost template for SAS 2.0 HBA devices */ static struct scsi_host_template mpt2sas_driver_template = { .module = THIS_MODULE, @@ -11696,6 +11720,7 @@ static struct scsi_host_template mpt3sas_driver_template = { .sdev_attrs = mpt3sas_dev_attrs, .track_queue_depth = 1, .cmd_size = sizeof(struct scsiio_tracker), + .map_queues = scsih_map_queues, }; /* raid transport support for SAS 3.0 HBA devices */ @@ -12058,6 +12083,21 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) } else ioc->hide_drives = 0; + shost->host_tagset = 0; + shost->nr_hw_queues = 1; + + if (ioc->is_gen35_ioc && ioc->reply_queue_count > 1 && + host_tagset_enable && ioc->smp_affinity_enable) { + + shost->host_tagset = 1; + shost->nr_hw_queues = + ioc->reply_queue_count - ioc->high_iops_queues; + + dev_info(&ioc->pdev->dev, + "Max SCSIIO MPT commands: %d shared with nr_hw_queues = %d\n", + shost->can_queue, shost->nr_hw_queues); + } + rv = scsi_add_host(shost, &pdev->dev); if (rv) { ioc_err(ioc, "failure at %s:%d/%s()!\n", -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 688c1a0a130ba33ebfbb45bfe2bbe151e48d385f upstream. When a host trace buffer is released, applications never know for what reason the buffer is released. Add a new IOCTL MPT3ADDNLDIAGQUERY to provide the trigger information due to which the diag buffer is released. Link: https://lore.kernel.org/r/20210204033724.1345-2-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 5 +- drivers/scsi/mpt3sas/mpt3sas_base.h | 47 +++++++++++++++ drivers/scsi/mpt3sas/mpt3sas_ctl.c | 67 ++++++++++++++++++++- drivers/scsi/mpt3sas/mpt3sas_ctl.h | 22 +++++++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 + drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c | 38 +++++++++++- 6 files changed, 177 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index d4064a0ddd57..f31b410623c1 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -8200,8 +8200,11 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, ioc_state = mpt3sas_base_get_iocstate(ioc, 0); if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT || (ioc_state & MPI2_IOC_STATE_MASK) == - MPI2_IOC_STATE_COREDUMP) + MPI2_IOC_STATE_COREDUMP) { is_fault = 1; + ioc->htb_rel.trigger_info_dwords[1] = + (ioc_state & MPI2_DOORBELL_DATA_MASK); + } } _base_pre_reset_handler(ioc); mpt3sas_wait_for_commands_to_complete(ioc); diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 36854414d627..448389f1da03 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1073,6 +1073,50 @@ struct hba_port { #define MULTIPATH_DISABLED_PORT_ID 0xFF +/** + * struct htb_rel_query - diagnostic buffer release reason + * @unique_id - unique id associated with this buffer. + * @buffer_rel_condition - Release condition ioctl/sysfs/reset + * @reserved + * @trigger_type - Master/Event/scsi/MPI + * @trigger_info_dwords - Data Correspondig to trigger type + */ +struct htb_rel_query { + u16 buffer_rel_condition; + u16 reserved; + u32 trigger_type; + u32 trigger_info_dwords[2]; +}; + +/* Buffer_rel_condition bit fields */ + +/* Bit 0 - Diag Buffer not Released */ +#define MPT3_DIAG_BUFFER_NOT_RELEASED (0x00) +/* Bit 0 - Diag Buffer Released */ +#define MPT3_DIAG_BUFFER_RELEASED (0x01) + +/* + * Bit 1 - Diag Buffer Released by IOCTL, + * This bit is valid only if Bit 0 is one + */ +#define MPT3_DIAG_BUFFER_REL_IOCTL (0x02 | MPT3_DIAG_BUFFER_RELEASED) + +/* + * Bit 2 - Diag Buffer Released by Trigger, + * This bit is valid only if Bit 0 is one + */ +#define MPT3_DIAG_BUFFER_REL_TRIGGER (0x04 | MPT3_DIAG_BUFFER_RELEASED) + +/* + * Bit 3 - Diag Buffer Released by SysFs, + * This bit is valid only if Bit 0 is one + */ +#define MPT3_DIAG_BUFFER_REL_SYSFS (0x08 | MPT3_DIAG_BUFFER_RELEASED) + +/* DIAG RESET Master trigger flags */ +#define MPT_DIAG_RESET_ISSUED_BY_DRIVER 0x00000000 +#define MPT_DIAG_RESET_ISSUED_BY_USER 0x00000001 + typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); /** * struct MPT3SAS_ADAPTER - per adapter struct @@ -1530,6 +1574,8 @@ struct MPT3SAS_ADAPTER { u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT]; u32 ring_buffer_offset; u32 ring_buffer_sz; + struct htb_rel_query htb_rel; + u8 reset_from_user; u8 is_warpdrive; u8 is_mcpu_endpoint; u8 hide_ir_msg; @@ -1566,6 +1612,7 @@ struct mpt3sas_debugfs_buffer { }; #define MPT_DRV_SUPPORT_BITMAP_MEMMOVE 0x00000001 +#define MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY 0x00000002 typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index c8a0ce18f2c5..44f9a05db94e 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -479,6 +479,8 @@ void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "%s: Releasing the trace buffer due to adapter reset.", __func__); + ioc->htb_rel.buffer_rel_condition = + MPT3_DIAG_BUFFER_REL_TRIGGER; mpt3sas_send_diag_release(ioc, i, &issue_reset); } } @@ -1334,6 +1336,7 @@ _ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg) dctlprintk(ioc, ioc_info(ioc, "%s: enter\n", __func__)); + ioc->reset_from_user = 1; retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); ioc_info(ioc, "Ioctl: host reset: %s\n", ((!retval) ? "SUCCESS" : "FAILED")); @@ -1687,6 +1690,9 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc, request_data = ioc->diag_buffer[buffer_type]; request_data_sz = diag_register->requested_buffer_size; ioc->unique_id[buffer_type] = diag_register->unique_id; + /* Reset ioc variables used for additional query commands */ + ioc->reset_from_user = 0; + memset(&ioc->htb_rel, 0, sizeof(struct htb_rel_query)); ioc->diag_buffer_status[buffer_type] &= MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED; memcpy(ioc->product_specific[buffer_type], @@ -2469,7 +2475,61 @@ _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg) return rc; } +/** + * _ctl_addnl_diag_query - query relevant info associated with diag buffers + * @ioc: per adapter object + * @arg: user space buffer containing ioctl content + * + * The application will send only unique_id. Driver will + * inspect unique_id first, if valid, fill the details related to cause + * for diag buffer release. + */ +static long +_ctl_addnl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + struct mpt3_addnl_diag_query karg; + u32 buffer_type = 0; + if (copy_from_user(&karg, arg, sizeof(karg))) { + pr_err("%s: failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return -EFAULT; + } + dctlprintk(ioc, ioc_info(ioc, "%s\n", __func__)); + if (karg.unique_id == 0) { + ioc_err(ioc, "%s: unique_id is(0x%08x)\n", + __func__, karg.unique_id); + return -EPERM; + } + buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id); + if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) { + ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n", + __func__, karg.unique_id); + return -EPERM; + } + memset(&karg.buffer_rel_condition, 0, sizeof(struct htb_rel_query)); + if ((ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { + ioc_info(ioc, "%s: buffer_type(0x%02x) is not registered\n", + __func__, buffer_type); + goto out; + } + if ((ioc->diag_buffer_status[buffer_type] & + MPT3_DIAG_BUFFER_IS_RELEASED) == 0) { + ioc_err(ioc, "%s: buffer_type(0x%02x) is not released\n", + __func__, buffer_type); + return -EPERM; + } + memcpy(&karg.buffer_rel_condition, &ioc->htb_rel, + sizeof(struct htb_rel_query)); +out: + if (copy_to_user(arg, &karg, sizeof(struct mpt3_addnl_diag_query))) { + ioc_err(ioc, "%s: unable to write mpt3_addnl_diag_query data @ %p\n", + __func__, arg); + return -EFAULT; + } + return 0; +} #ifdef CONFIG_COMPAT /** @@ -2533,7 +2593,7 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg, struct MPT3SAS_ADAPTER *ioc; struct mpt3_ioctl_header ioctl_header; enum block_state state; - long ret = -EINVAL; + long ret = -ENOIOCTLCMD; /* get IOCTL header */ if (copy_from_user(&ioctl_header, (char __user *)arg, @@ -2643,6 +2703,10 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg, if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_read_buffer)) ret = _ctl_diag_read_buffer(ioc, arg); break; + case MPT3ADDNLDIAGQUERY: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_addnl_diag_query)) + ret = _ctl_addnl_diag_query(ioc, arg); + break; default: dctlprintk(ioc, ioc_info(ioc, "unsupported ioctl opcode(0x%08x)\n", @@ -3425,6 +3489,7 @@ host_trace_buffer_enable_store(struct device *cdev, MPT3_DIAG_BUFFER_IS_RELEASED)) goto out; ioc_info(ioc, "releasing host trace buffer\n"); + ioc->htb_rel.buffer_rel_condition = MPT3_DIAG_BUFFER_REL_SYSFS; mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE, &issue_reset); } diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h index 0f7aa4ddade0..d2ccdafb8df2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h @@ -94,6 +94,8 @@ struct mpt3_diag_query) #define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \ struct mpt3_diag_read_buffer) +#define MPT3ADDNLDIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 32, \ + struct mpt3_addnl_diag_query) /* Trace Buffer default UniqueId */ #define MPT2DIAGBUFFUNIQUEID (0x07075900) @@ -430,4 +432,24 @@ struct mpt3_diag_read_buffer { uint32_t diagnostic_data[1]; }; +/** + * struct mpt3_addnl_diag_query - diagnostic buffer release reason + * @hdr - generic header + * @unique_id - unique id associated with this buffer. + * @buffer_rel_condition - Release condition ioctl/sysfs/reset + * @reserved1 + * @trigger_type - Master/Event/scsi/MPI + * @trigger_info_dwords - Data Correspondig to trigger type + * @reserved2 + */ +struct mpt3_addnl_diag_query { + struct mpt3_ioctl_header hdr; + uint32_t unique_id; + uint16_t buffer_rel_condition; + uint16_t reserved1; + uint32_t trigger_type; + uint32_t trigger_info_dwords[2]; + uint32_t reserved2[2]; +}; + #endif /* MPT3SAS_CTL_H_INCLUDED */ diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 422f6323f324..93023e4e33db 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -11977,6 +11977,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) * Enable MEMORY MOVE support flag. */ ioc->drv_support_bitmap |= MPT_DRV_SUPPORT_BITMAP_MEMMOVE; + /* Enable ADDITIONAL QUERY support flag. */ + ioc->drv_support_bitmap |= MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY; ioc->enable_sdev_max_qd = enable_sdev_max_qd; diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c index 8ec9bab20ec4..d9b7d0ee25b0 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c +++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c @@ -132,6 +132,35 @@ mpt3sas_process_trigger_data(struct MPT3SAS_ADAPTER *ioc, &issue_reset); } + ioc->htb_rel.buffer_rel_condition = MPT3_DIAG_BUFFER_REL_TRIGGER; + if (event_data) { + ioc->htb_rel.trigger_type = event_data->trigger_type; + switch (event_data->trigger_type) { + case MPT3SAS_TRIGGER_SCSI: + memcpy(&ioc->htb_rel.trigger_info_dwords, + &event_data->u.scsi, + sizeof(struct SL_WH_SCSI_TRIGGER_T)); + break; + case MPT3SAS_TRIGGER_MPI: + memcpy(&ioc->htb_rel.trigger_info_dwords, + &event_data->u.mpi, + sizeof(struct SL_WH_MPI_TRIGGER_T)); + break; + case MPT3SAS_TRIGGER_MASTER: + ioc->htb_rel.trigger_info_dwords[0] = + event_data->u.master.MasterData; + break; + case MPT3SAS_TRIGGER_EVENT: + memcpy(&ioc->htb_rel.trigger_info_dwords, + &event_data->u.event, + sizeof(struct SL_WH_EVENT_TRIGGER_T)); + break; + default: + ioc_err(ioc, "%d - Is not a valid Trigger type\n", + event_data->trigger_type); + break; + } + } _mpt3sas_raise_sigio(ioc, event_data); dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n", @@ -201,9 +230,14 @@ mpt3sas_trigger_master(struct MPT3SAS_ADAPTER *ioc, u32 trigger_bitmask) event_data.u.master.MasterData = trigger_bitmask; if (trigger_bitmask & MASTER_TRIGGER_FW_FAULT || - trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET) + trigger_bitmask & MASTER_TRIGGER_ADAPTER_RESET) { + ioc->htb_rel.trigger_type = MPT3SAS_TRIGGER_MASTER; + ioc->htb_rel.trigger_info_dwords[0] = trigger_bitmask; + if (ioc->reset_from_user) + ioc->htb_rel.trigger_info_dwords[1] = + MPT_DIAG_RESET_ISSUED_BY_USER; _mpt3sas_raise_sigio(ioc, &event_data); - else + } else mpt3sas_send_trigger_data_event(ioc, &event_data); out: -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 446b5f3d3fd5545029525a7a3881ecd9dd246976 upstream. Update driver version to 37.100.00.00. Link: https://lore.kernel.org/r/20210204033724.1345-3-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 448389f1da03..0d89f9752d96 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -77,8 +77,8 @@ #define MPT3SAS_DRIVER_NAME "mpt3sas" #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "36.100.00.00" -#define MPT3SAS_MAJOR_VERSION 36 +#define MPT3SAS_DRIVER_VERSION "37.100.00.00" +#define MPT3SAS_MAJOR_VERSION 37 #define MPT3SAS_MINOR_VERSION 100 #define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 -- 2.33.0
From: Ming Lei <ming.lei@redhat.com> Commit 8278807abd338f2246b6ae8057f2ec61a80a5614 upstream. Add scsi_device_busy() helper to prepare drivers for tracking device queue depth via sbitmap_queue. Link: https://lore.kernel.org/r/20210122023317.687987-12-ming.lei@redhat.com Cc: Omar Sandoval <osandov@fb.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/message/fusion/mptsas.c | 2 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +- drivers/scsi/scsi_lib.c | 4 ++-- drivers/scsi/scsi_sysfs.c | 2 +- drivers/scsi/sg.c | 2 +- include/scsi/scsi_device.h | 5 +++++ 6 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 18b91ea1a353..25dd9b2e12ab 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -3756,7 +3756,7 @@ mptsas_send_link_status_event(struct fw_event_work *fw_event) printk(MYIOC_s_DEBUG_FMT "SDEV OUTSTANDING CMDS" "%d\n", ioc->name, - atomic_read(&sdev->device_busy))); + scsi_device_busy(sdev))); } } diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 93023e4e33db..3bc14735696c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3423,7 +3423,7 @@ scsih_dev_reset(struct scsi_cmnd *scmd) MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 0, tr_timeout, tr_method); /* Check for busy commands after reset */ - if (r == SUCCESS && atomic_read(&scmd->device->device_busy)) + if (r == SUCCESS && scsi_device_busy(scmd->device)) r = FAILED; out: sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(0x%p)\n", diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 9352a309fe55..d6e4b137e3f6 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -387,7 +387,7 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev) static inline bool scsi_device_is_busy(struct scsi_device *sdev) { - if (atomic_read(&sdev->device_busy) >= sdev->queue_depth) + if (scsi_device_busy(sdev) >= sdev->queue_depth) return true; if (atomic_read(&sdev->device_blocked) > 0) return true; @@ -1634,7 +1634,7 @@ static bool scsi_mq_get_budget(struct request_queue *q) * the .restarts flag, and the request queue will be run for handling * this request, see scsi_end_request(). */ - if (unlikely(atomic_read(&sdev->device_busy) == 0 && + if (unlikely(scsi_device_busy(sdev) == 0 && !scsi_device_blocked(sdev))) blk_mq_delay_run_hw_queues(sdev->request_queue, SCSI_QUEUE_DELAY); return false; diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 8a24d144395d..0afc9d31f39b 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -679,7 +679,7 @@ sdev_show_device_busy(struct device *dev, struct device_attribute *attr, char *buf) { struct scsi_device *sdev = to_scsi_device(dev); - return snprintf(buf, 20, "%d\n", atomic_read(&sdev->device_busy)); + return snprintf(buf, 20, "%d\n", scsi_device_busy(sdev)); } static DEVICE_ATTR(device_busy, S_IRUGO, sdev_show_device_busy, NULL); diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index e1c086ac8a60..ec89119ce5b7 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2517,7 +2517,7 @@ static int sg_proc_seq_show_dev(struct seq_file *s, void *v) scsidp->id, scsidp->lun, (int) scsidp->type, 1, (int) scsidp->queue_depth, - (int) atomic_read(&scsidp->device_busy), + (int) scsi_device_busy(scsidp), (int) scsi_device_online(scsidp)); } read_unlock_irqrestore(&sg_index_lock, iflags); diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 8b9d1aac62d1..f9795d0a7a34 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -606,6 +606,11 @@ static inline int scsi_device_supports_vpd(struct scsi_device *sdev) return 0; } +static inline int scsi_device_busy(struct scsi_device *sdev) +{ + return atomic_read(&sdev->device_busy); +} + #define MODULE_ALIAS_SCSI_DEVICE(type) \ MODULE_ALIAS("scsi:t-" __stringify(type) "*") #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x" -- 2.33.0
From: Ming Lei <ming.lei@redhat.com> Commit 020b0f0a31920e5b7e7e120d4560453b67b70733 upstream. SCSI currently uses an atomic variable to track queue depth for each attached device. The queue depth depends on many factors such as transport type and device implementation. In addition, the SCSI device queue depth is not a static entity but changes over time as a result of congestion management. While blk-mq currently tracks queue depth for each hctx, it can't easily be changed to accommodate the SCSI per-device requirement. The current approach of using an atomic variable doesn't scale well when there are lots of CPU cores and the disk is very fast. IOPS can be substantially impacted by the atomic in the hot path. Replace the atomic variable sdev->device_busy with an sbitmap for tracking the SCSI device queue depth. It has been observed that IOPS is improved ~30% by this patchset in the following test: 1) test machine(32 logical CPU cores) Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 2 NUMA node(s): 2 Model name: Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz 2) setup scsi_debug: modprobe scsi_debug virtual_gb=128 max_luns=1 submit_queues=32 delay=0 max_queue=256 3) fio script: fio --rw=randread --size=128G --direct=1 --ioengine=libaio --iodepth=2048 \ --numjobs=32 --bs=4k --group_reporting=1 --group_reporting=1 --runtime=60 \ --loops=10000 --name=job1 --filename=/dev/sdN [mkp: fix device_busy reference in mpt3sas] Link: https://lore.kernel.org/r/20210122023317.687987-14-ming.lei@redhat.com Link: https://lore.kernel.org/linux-block/20200119071432.18558-6-ming.lei@redhat.c... Cc: Omar Sandoval <osandov@fb.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> [SY: just keep the modify of mpt3sas to update the driver] Signed-off-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index f31b410623c1..e4c3bd59bcf2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -3679,8 +3679,7 @@ _base_get_high_iops_msix_index(struct MPT3SAS_ADAPTER *ioc, * IOs on the target device is >=8. */ - if (atomic_read(&scmd->device->device_busy) > - MPT3SAS_DEVICE_HIGH_IOPS_DEPTH) + if (scsi_device_busy(scmd->device) > MPT3SAS_DEVICE_HIGH_IOPS_DEPTH) return base_mod64(( atomic64_add_return(1, &ioc->high_iops_outstanding) / MPT3SAS_HIGH_IOPS_BATCH_COUNT), -- 2.33.0
From: Lee Jones <lee.jones@linaro.org> Commit e015e0ded1351f281202fc1d138fc862ec01d1d4 upstream. Fixes the following W=1 kernel build warning(s): drivers/scsi/mpt3sas/mpt3sas_base.c:4185: warning: expecting prototype for _base_put_smid_default(). Prototype was for _base_put_smid_default_atomic() instead Link: https://lore.kernel.org/r/20210303144631.3175331-29-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index e4c3bd59bcf2..e41666850653 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4173,7 +4173,7 @@ _base_put_smid_hi_priority_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, } /** - * _base_put_smid_default - Default, primarily used for config pages + * _base_put_smid_default_atomic - Default, primarily used for config pages * use Atomic Request Descriptor * @ioc: per adapter object * @smid: system request message index -- 2.33.0
From: Lee Jones <lee.jones@linaro.org> Commit 2111ba8781da6067e869329886fc717cbd7d93e2 upstream. Fixes the following W=1 kernel build warning(s): drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function ‘_scsih_scan_for_devices_after_reset’: drivers/scsi/mpt3sas/mpt3sas_scsih.c:10473:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] Link: https://lore.kernel.org/r/20210303144631.3175331-31-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 38 +++++++++++++++++++--------- 1 file changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 3bc14735696c..cbb806fef501 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -10243,8 +10243,8 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) Mpi2ExpanderPage0_t expander_pg0; Mpi2SasDevicePage0_t sas_device_pg0; Mpi26PCIeDevicePage0_t pcie_device_pg0; - Mpi2RaidVolPage1_t volume_pg1; - Mpi2RaidVolPage0_t volume_pg0; + Mpi2RaidVolPage1_t *volume_pg1; + Mpi2RaidVolPage0_t *volume_pg0; Mpi2RaidPhysDiskPage0_t pd_pg0; Mpi2EventIrConfigElement_t element; Mpi2ConfigReply_t mpi_reply; @@ -10259,6 +10259,16 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) u8 retry_count; unsigned long flags; + volume_pg0 = kzalloc(sizeof(*volume_pg0), GFP_KERNEL); + if (!volume_pg0) + return; + + volume_pg1 = kzalloc(sizeof(*volume_pg1), GFP_KERNEL); + if (!volume_pg1) { + kfree(volume_pg0); + return; + } + ioc_info(ioc, "scan devices: start\n"); _scsih_sas_host_refresh(ioc); @@ -10368,7 +10378,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) /* volumes */ handle = 0xFFFF; while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, - &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { @@ -10376,15 +10386,15 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo)); break; } - handle = le16_to_cpu(volume_pg1.DevHandle); + handle = le16_to_cpu(volume_pg1->DevHandle); spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_wwid(ioc, - le64_to_cpu(volume_pg1.WWID)); + le64_to_cpu(volume_pg1->WWID)); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (raid_device) continue; if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, - &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, + volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, sizeof(Mpi2RaidVolPage0_t))) continue; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & @@ -10394,17 +10404,17 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo)); break; } - if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || - volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || - volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) { + if (volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || + volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_ONLINE || + volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) { memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t)); element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED; - element.VolDevHandle = volume_pg1.DevHandle; + element.VolDevHandle = volume_pg1->DevHandle; ioc_info(ioc, "\tBEFORE adding volume: handle (0x%04x)\n", - volume_pg1.DevHandle); + volume_pg1->DevHandle); _scsih_sas_volume_add(ioc, &element); ioc_info(ioc, "\tAFTER adding volume: handle (0x%04x)\n", - volume_pg1.DevHandle); + volume_pg1->DevHandle); } } @@ -10492,6 +10502,10 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "\tAFTER adding pcie end device: handle (0x%04x), wwid(0x%016llx)\n", handle, (u64)le64_to_cpu(pcie_device_pg0.WWID)); } + + kfree(volume_pg0); + kfree(volume_pg1); + ioc_info(ioc, "\tpcie devices: pcie end devices complete\n"); ioc_info(ioc, "scan devices: complete\n"); } -- 2.33.0
From: Lee Jones <lee.jones@linaro.org> Commit cf9e575e62a4c2dbb665490cf35da043890e5751 upstream, Fixes the following W=1 kernel build warning(s): drivers/scsi/mpt3sas/mpt3sas_config.c:1795: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg0(). Prototype was for _config_set_driver_trigger_pg0() instead drivers/scsi/mpt3sas/mpt3sas_config.c:1929: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg1(). Prototype was for _config_set_driver_trigger_pg1() instead drivers/scsi/mpt3sas/mpt3sas_config.c:2080: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg2(). Prototype was for _config_set_driver_trigger_pg2() instead drivers/scsi/mpt3sas/mpt3sas_config.c:2240: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg3(). Prototype was for _config_set_driver_trigger_pg3() instead drivers/scsi/mpt3sas/mpt3sas_config.c:2397: warning: expecting prototype for mpt3sas_config_set_driver_trigger_pg4(). Prototype was for _config_set_driver_trigger_pg4() instead Link: https://lore.kernel.org/r/20210312094738.2207817-2-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_config.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 8238843523b5..55cd32908924 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -1781,7 +1781,7 @@ mpt3sas_config_get_driver_trigger_pg0(struct MPT3SAS_ADAPTER *ioc, } /** - * mpt3sas_config_set_driver_trigger_pg0 - write driver trigger page 0 + * _config_set_driver_trigger_pg0 - write driver trigger page 0 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page @@ -1915,7 +1915,7 @@ mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc, } /** - * mpt3sas_config_set_driver_trigger_pg1 - write driver trigger page 1 + * _config_set_driver_trigger_pg1 - write driver trigger page 1 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page @@ -2066,7 +2066,7 @@ mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, } /** - * mpt3sas_config_set_driver_trigger_pg2 - write driver trigger page 2 + * _config_set_driver_trigger_pg2 - write driver trigger page 2 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page @@ -2226,7 +2226,7 @@ mpt3sas_config_get_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, } /** - * mpt3sas_config_set_driver_trigger_pg3 - write driver trigger page 3 + * _config_set_driver_trigger_pg3 - write driver trigger page 3 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page @@ -2383,7 +2383,7 @@ mpt3sas_config_get_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, } /** - * mpt3sas_config_set_driver_trigger_pg4 - write driver trigger page 4 + * _config_set_driver_trigger_pg4 - write driver trigger page 4 * @ioc: per adapter object * @mpi_reply: reply mf payload returned from firmware * @config_page: contents of the config page -- 2.33.0
From: Lee Jones <lee.jones@linaro.org> Commit 54cb88dc3083e5dbdba48600de6a6542c48a3e13 upstream. Fixes the following W=1 kernel build warning(s): drivers/scsi/mpt3sas/mpt3sas_transport.c:71: warning: Function parameter or member 'phy' not described in '_transport_get_port_id_by_sas_phy' drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: Function parameter or member 'port_id' not described in '_transport_expander_report_manufacture' drivers/scsi/mpt3sas/mpt3sas_transport.c:354: warning: expecting prototype for transport_expander_report_manufacture(). Prototype was for _transport_expander_report_manufacture() instead drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Function parameter or member 'hba_port' not described in 'mpt3sas_transport_port_add' drivers/scsi/mpt3sas/mpt3sas_transport.c:684: warning: Excess function parameter 'port' description in 'mpt3sas_transport_port_add' Link: https://lore.kernel.org/r/20210312094738.2207817-7-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_transport.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 6f4708224755..0681daee6c14 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -62,7 +62,7 @@ /** * _transport_get_port_id_by_sas_phy - get zone's port id that Phy belong to - * @phy - sas_phy object + * @phy: sas_phy object * * Return Port number */ @@ -339,10 +339,11 @@ struct rep_manu_reply { }; /** - * transport_expander_report_manufacture - obtain SMP report_manufacture + * _transport_expander_report_manufacture - obtain SMP report_manufacture * @ioc: per adapter object * @sas_address: expander sas address * @edev: the sas_expander_device object + * @port_id: Port ID number * * Fills in the sas_expander_device object when SMP port is created. * @@ -671,7 +672,7 @@ _transport_sanity_check(struct MPT3SAS_ADAPTER *ioc, struct _sas_node *sas_node, * @ioc: per adapter object * @handle: handle of attached device * @sas_address: sas address of parent expander or sas host - * @port: hba port entry + * @hba_port: hba port entry * Context: This function will acquire ioc->sas_node_lock. * * Adding new port object to the sas_node->sas_port_list. -- 2.33.0
From: Lee Jones <lee.jones@linaro.org> Commit 782a1ab33f71b898497b2d035a056e5e198df82b upstream. Fixes the following W=1 kernel build warning(s): drivers/scsi/mpt3sas/mpt3sas_ctl.c:463: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_pre_reset_handler() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:495: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_clear_outstanding_ioctls() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:512: warning: expecting prototype for mpt3sas_ctl_reset_handler(). Prototype was for mpt3sas_ctl_reset_done_handler() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:2771: warning: expecting prototype for _ ctl_ioctl_compat(). Prototype was for _ctl_ioctl_compat() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:2789: warning: expecting prototype for _ ctl_mpt2_ioctl_compat(). Prototype was for _ctl_mpt2_ioctl_compat() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:3061: warning: expecting prototype for sas_address_show(). Prototype was for host_sas_address_show() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:3682: warning: expecting prototype for diag_trigger_scsi_show(). Prototype was for diag_trigger_mpi_show() instead drivers/scsi/mpt3sas/mpt3sas_ctl.c:3941: warning: expecting prototype for sas_ncq_io_prio_show(). Prototype was for sas_ncq_prio_enable_show() instead Link: https://lore.kernel.org/r/20210312094738.2207817-10-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 44f9a05db94e..8717412b8079 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -454,7 +454,7 @@ _ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp, } /** - * mpt3sas_ctl_reset_handler - reset callback handler (for ctl) + * mpt3sas_ctl_pre_reset_handler - reset callback handler (for ctl) * @ioc: per adapter object * * The handler for doing any required cleanup or initialization. @@ -486,7 +486,7 @@ void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc) } /** - * mpt3sas_ctl_reset_handler - clears outstanding ioctl cmd. + * mpt3sas_ctl_clear_outstanding_ioctls - clears outstanding ioctl cmd. * @ioc: per adapter object * * The handler for doing any required cleanup or initialization. @@ -503,7 +503,7 @@ void mpt3sas_ctl_clear_outstanding_ioctls(struct MPT3SAS_ADAPTER *ioc) } /** - * mpt3sas_ctl_reset_handler - reset callback handler (for ctl) + * mpt3sas_ctl_reset_done_handler - reset callback handler (for ctl) * @ioc: per adapter object * * The handler for doing any required cleanup or initialization. @@ -2759,7 +2759,7 @@ _ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } #ifdef CONFIG_COMPAT /** - *_ ctl_ioctl_compat - main ioctl entry point (compat) + * _ctl_ioctl_compat - main ioctl entry point (compat) * @file: ? * @cmd: ? * @arg: ? @@ -2777,7 +2777,7 @@ _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg) } /** - *_ ctl_mpt2_ioctl_compat - main ioctl entry point (compat) + * _ctl_mpt2_ioctl_compat - main ioctl entry point (compat) * @file: ? * @cmd: ? * @arg: ? @@ -3045,7 +3045,7 @@ fw_queue_depth_show(struct device *cdev, struct device_attribute *attr, static DEVICE_ATTR_RO(fw_queue_depth); /** - * sas_address_show - sas address + * host_sas_address_show - sas address * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3669,7 +3669,7 @@ static DEVICE_ATTR_RW(diag_trigger_scsi); /** - * diag_trigger_scsi_show - show the diag_trigger_mpi attribute + * diag_trigger_mpi_show - show the diag_trigger_mpi attribute * @cdev: pointer to embedded class device * @attr: ? * @buf: the buffer returned @@ -3928,7 +3928,7 @@ sas_device_handle_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RO(sas_device_handle); /** - * sas_ncq_io_prio_show - send prioritized io commands to device + * sas_ncq_prio_enable_show - send prioritized io commands to device * @dev: pointer to embedded device * @attr: ? * @buf: the buffer returned -- 2.33.0
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Commit a50bd64616907ed126ffbdbaa06c5ce708c4a404 upstream. mpt3sas_get_port_by_id() can be called when a spinlock is held. Use GFP_ATOMIC instead of GFP_KERNEL when allocating memory. Issue spotted by call_kern.cocci: ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7125 inside lock on line 7123 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6842 inside lock on line 6839 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6854 inside lock on line 6851 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7706 inside lock on line 7702 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 10260 inside lock on line 10256 but uses GFP_KERNEL Link: https://lore.kernel.org/r/20210220093951.905362-1-christophe.jaillet@wanadoo... Fixes: 324c122fc0a4 ("scsi: mpt3sas: Add module parameter multipath_on_hba") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index cbb806fef501..1db12fab4f8e 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -413,7 +413,7 @@ mpt3sas_get_port_by_id(struct MPT3SAS_ADAPTER *ioc, * And add this object to port_table_list. */ if (!ioc->multipath_on_hba) { - port = kzalloc(sizeof(struct hba_port), GFP_KERNEL); + port = kzalloc(sizeof(struct hba_port), GFP_ATOMIC); if (!port) return NULL; -- 2.33.0
From: "Gustavo A. R. Silva" <gustavoars@kernel.org> Commit a1c4d7741323eff1d9c5baca8337ac3ac4630649 upstream. Dynamic memory allocation isn't actually needed and it can be replaced by statically allocating memory for struct object io_unit_pg3 with 36 hardcoded entries for its GPIOVal array. Also, this helps the with ongoing efforts to enable -Warray-bounds by fixing the following warning: drivers/scsi/mpt3sas/mpt3sas_ctl.c: In function ‘BRM_status_show’: drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:63: warning: array subscript 24 is above array bounds of ‘U16[1]’ {aka ‘short unsigned int[1]’} [-Warray-bounds] 3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]); ./include/uapi/linux/byteorder/little_endian.h:36:51: note: in definition of macro ‘__le16_to_cpu’ 36 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) | ^ drivers/scsi/mpt3sas/mpt3sas_ctl.c:3257:31: note: in expansion of macro ‘le16_to_cpu’ 3257 | backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]); Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/202103101058.16ED27BE3@keescook/ Link: https://lore.kernel.org/r/20210310235951.GA108661@embeddedor Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 2 +- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 24 ++++++++---------------- 2 files changed, 9 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h index 43a3bf8ff428..d00431f553e1 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -992,7 +992,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 { *one and check the value returned for GPIOCount at runtime. */ #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX -#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) +#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (36) #endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 { diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 8717412b8079..e7582fb8a93f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -3203,7 +3203,7 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr, { struct Scsi_Host *shost = class_to_shost(cdev); struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); - Mpi2IOUnitPage3_t *io_unit_pg3 = NULL; + Mpi2IOUnitPage3_t io_unit_pg3; Mpi2ConfigReply_t mpi_reply; u16 backup_rail_monitor_status = 0; u16 ioc_status; @@ -3220,17 +3220,10 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr, if (ioc->pci_error_recovery || ioc->remove_host) goto out; - /* allocate upto GPIOVal 36 entries */ - sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36); - io_unit_pg3 = kzalloc(sz, GFP_KERNEL); - if (!io_unit_pg3) { - rc = -ENOMEM; - ioc_err(ioc, "%s: failed allocating memory for iounit_pg3: (%d) bytes\n", - __func__, sz); - goto out; - } + sz = sizeof(io_unit_pg3); + memset(&io_unit_pg3, 0, sz); - if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, io_unit_pg3, sz) != + if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, &io_unit_pg3, sz) != 0) { ioc_err(ioc, "%s: failed reading iounit_pg3\n", __func__); @@ -3246,19 +3239,18 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr, goto out; } - if (io_unit_pg3->GPIOCount < 25) { - ioc_err(ioc, "%s: iounit_pg3->GPIOCount less than 25 entries, detected (%d) entries\n", - __func__, io_unit_pg3->GPIOCount); + if (io_unit_pg3.GPIOCount < 25) { + ioc_err(ioc, "%s: iounit_pg3.GPIOCount less than 25 entries, detected (%d) entries\n", + __func__, io_unit_pg3.GPIOCount); rc = -EINVAL; goto out; } /* BRM status is in bit zero of GPIOVal[24] */ - backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]); + backup_rail_monitor_status = le16_to_cpu(io_unit_pg3.GPIOVal[24]); rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1)); out: - kfree(io_unit_pg3); mutex_unlock(&ioc->pci_access_mutex); return rc; } -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit d6adc251dd2fede6aaaf6c39f7e4ad799eda3758 upstream. According to the MPI specification, PCIe SGL buffers can not cross a 4 GB boundary. While allocating, if any buffer crosses the 4 GB boundary, then: - Release the already allocated memory pools; and - Reallocate them by changing the DMA coherent mask to 32-bit Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 159 ++++++++++++++++++++-------- drivers/scsi/mpt3sas/mpt3sas_base.h | 1 + 2 files changed, 113 insertions(+), 47 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index e41666850653..d42a0029f8d8 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2906,23 +2906,22 @@ static int _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) { struct sysinfo s; - int dma_mask; if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma || dma_get_required_mask(&pdev->dev) <= 32) - dma_mask = 32; + ioc->dma_mask = 32; /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) - dma_mask = 63; + ioc->dma_mask = 63; else - dma_mask = 64; + ioc->dma_mask = 64; - if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(dma_mask)) || - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(dma_mask))) + if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask)) || + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask))) return -ENODEV; - if (dma_mask > 32) { + if (ioc->dma_mask > 32) { ioc->base_add_sg_single = &_base_add_sg_single_64; ioc->sge_size = sizeof(Mpi2SGESimple64_t); } else { @@ -2932,7 +2931,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) si_meminfo(&s); ioc_info(ioc, "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n", - dma_mask, convert_to_kb(s.totalram)); + ioc->dma_mask, convert_to_kb(s.totalram)); return 0; } @@ -5338,10 +5337,10 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) dma_pool_free(ioc->pcie_sgl_dma_pool, ioc->pcie_sg_lookup[i].pcie_sgl, ioc->pcie_sg_lookup[i].pcie_sgl_dma); + ioc->pcie_sg_lookup[i].pcie_sgl = NULL; } dma_pool_destroy(ioc->pcie_sgl_dma_pool); } - if (ioc->config_page) { dexitprintk(ioc, ioc_info(ioc, "config_page(0x%p): free\n", @@ -5399,6 +5398,89 @@ mpt3sas_check_same_4gb_region(long reply_pool_start_address, u32 pool_sz) return 0; } +/** + * _base_reduce_hba_queue_depth- Retry with reduced queue depth + * @ioc: Adapter object + * + * Return: 0 for success, non-zero for failure. + **/ +static inline int +_base_reduce_hba_queue_depth(struct MPT3SAS_ADAPTER *ioc) +{ + int reduce_sz = 64; + + if ((ioc->hba_queue_depth - reduce_sz) > + (ioc->internal_depth + INTERNAL_SCSIIO_CMDS_COUNT)) { + ioc->hba_queue_depth -= reduce_sz; + return 0; + } else + return -ENOMEM; +} + +/** + * _base_allocate_pcie_sgl_pool - Allocating DMA'able memory + * for pcie sgl pools. + * @ioc: Adapter object + * @sz: DMA Pool size + * @ct: Chain tracker + * Return: 0 for success, non-zero for failure. + */ + +static int +_base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) +{ + int i = 0, j = 0; + struct chain_tracker *ct; + + ioc->pcie_sgl_dma_pool = + dma_pool_create("PCIe SGL pool", &ioc->pdev->dev, sz, + ioc->page_size, 0); + if (!ioc->pcie_sgl_dma_pool) { + ioc_err(ioc, "PCIe SGL pool: dma_pool_create failed\n"); + return -ENOMEM; + } + + ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz; + ioc->chains_per_prp_buffer = + min(ioc->chains_per_prp_buffer, ioc->chains_needed_per_io); + for (i = 0; i < ioc->scsiio_depth; i++) { + ioc->pcie_sg_lookup[i].pcie_sgl = + dma_pool_alloc(ioc->pcie_sgl_dma_pool, GFP_KERNEL, + &ioc->pcie_sg_lookup[i].pcie_sgl_dma); + if (!ioc->pcie_sg_lookup[i].pcie_sgl) { + ioc_err(ioc, "PCIe SGL pool: dma_pool_alloc failed\n"); + return -EAGAIN; + } + + if (!mpt3sas_check_same_4gb_region( + (long)ioc->pcie_sg_lookup[i].pcie_sgl, sz)) { + ioc_err(ioc, "PCIE SGLs are not in same 4G !! pcie sgl (0x%p) dma = (0x%llx)\n", + ioc->pcie_sg_lookup[i].pcie_sgl, + (unsigned long long) + ioc->pcie_sg_lookup[i].pcie_sgl_dma); + ioc->use_32bit_dma = true; + return -EAGAIN; + } + + for (j = 0; j < ioc->chains_per_prp_buffer; j++) { + ct = &ioc->chain_lookup[i].chains_per_smid[j]; + ct->chain_buffer = + ioc->pcie_sg_lookup[i].pcie_sgl + + (j * ioc->chain_segment_sz); + ct->chain_buffer_dma = + ioc->pcie_sg_lookup[i].pcie_sgl_dma + + (j * ioc->chain_segment_sz); + } + } + dinitprintk(ioc, ioc_info(ioc, + "PCIe sgl pool depth(%d), element_size(%d), pool_size(%d kB)\n", + ioc->scsiio_depth, sz, (sz * ioc->scsiio_depth)/1024)); + dinitprintk(ioc, ioc_info(ioc, + "Number of chains can fit in a PRP page(%d)\n", + ioc->chains_per_prp_buffer)); + return 0; +} + /** * base_alloc_rdpq_dma_pool - Allocating DMA'able memory * for reply queues. @@ -5497,7 +5579,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) unsigned short sg_tablesize; u16 sge_size; int i, j; - int ret = 0; + int ret = 0, rc = 0; struct chain_tracker *ct; dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); @@ -5802,6 +5884,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) * be required for NVMe PRP's, only each set of NVMe blocks will be * contiguous, so a new set is allocated for each possible I/O. */ + ioc->chains_per_prp_buffer = 0; if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) { nvme_blocks_needed = @@ -5816,43 +5899,11 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) goto out; } sz = nvme_blocks_needed * ioc->page_size; - ioc->pcie_sgl_dma_pool = - dma_pool_create("PCIe SGL pool", &ioc->pdev->dev, sz, 16, 0); - if (!ioc->pcie_sgl_dma_pool) { - ioc_info(ioc, "PCIe SGL pool: dma_pool_create failed\n"); - goto out; - } - - ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz; - ioc->chains_per_prp_buffer = min(ioc->chains_per_prp_buffer, - ioc->chains_needed_per_io); - - for (i = 0; i < ioc->scsiio_depth; i++) { - ioc->pcie_sg_lookup[i].pcie_sgl = dma_pool_alloc( - ioc->pcie_sgl_dma_pool, GFP_KERNEL, - &ioc->pcie_sg_lookup[i].pcie_sgl_dma); - if (!ioc->pcie_sg_lookup[i].pcie_sgl) { - ioc_info(ioc, "PCIe SGL pool: dma_pool_alloc failed\n"); - goto out; - } - for (j = 0; j < ioc->chains_per_prp_buffer; j++) { - ct = &ioc->chain_lookup[i].chains_per_smid[j]; - ct->chain_buffer = - ioc->pcie_sg_lookup[i].pcie_sgl + - (j * ioc->chain_segment_sz); - ct->chain_buffer_dma = - ioc->pcie_sg_lookup[i].pcie_sgl_dma + - (j * ioc->chain_segment_sz); - } - } - - dinitprintk(ioc, - ioc_info(ioc, "PCIe sgl pool depth(%d), element_size(%d), pool_size(%d kB)\n", - ioc->scsiio_depth, sz, - (sz * ioc->scsiio_depth) / 1024)); - dinitprintk(ioc, - ioc_info(ioc, "Number of chains can fit in a PRP page(%d)\n", - ioc->chains_per_prp_buffer)); + rc = _base_allocate_pcie_sgl_pool(ioc, sz); + if (rc == -ENOMEM) + return -ENOMEM; + else if (rc == -EAGAIN) + goto try_32bit_dma; total_sz += sz * ioc->scsiio_depth; } @@ -6022,6 +6073,19 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) ioc->shost->sg_tablesize); return 0; +try_32bit_dma: + _base_release_memory_pools(ioc); + if (ioc->use_32bit_dma && (ioc->dma_mask > 32)) { + /* Change dma coherent mask to 32 bit and reallocate */ + if (_base_config_dma_addressing(ioc, ioc->pdev) != 0) { + pr_err("Setting 32 bit coherent DMA mask Failed %s\n", + pci_name(ioc->pdev)); + return -ENODEV; + } + } else if (_base_reduce_hba_queue_depth(ioc) != 0) + return -ENOMEM; + goto retry_allocation; + out: return -ENOMEM; } @@ -7686,6 +7750,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->rdpq_array_enable_assigned = 0; ioc->use_32bit_dma = false; + ioc->dma_mask = 64; if (ioc->is_aero_ioc) ioc->base_readl = &_base_readl_aero; else diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 0d89f9752d96..e33cb9d60d8a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1371,6 +1371,7 @@ struct MPT3SAS_ADAPTER { u16 thresh_hold; u8 high_iops_queues; u32 drv_support_bitmap; + u32 dma_mask; bool enable_sdev_max_qd; bool use_32bit_dma; -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 7dd847dae1c48f4a58f3ba672ed9141a2a774805 upstream. According to the MPI specification, chain buffers can not cross a 4 GB boundary. While allocating, if any buffer crosses the 4 GB boundary, then: - Release the already allocated memory pools; and - Reallocate them by changing the DMA coherent mask to 32-bit Link: https://lore.kernel.org/r/20210305102904.7560-3-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 83 ++++++++++++++++++++--------- 1 file changed, 57 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index d42a0029f8d8..10ef9fd2f830 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5481,6 +5481,52 @@ _base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) return 0; } +/** + * _base_allocate_chain_dma_pool - Allocating DMA'able memory + * for chain dma pool. + * @ioc: Adapter object + * @sz: DMA Pool size + * @ctr: Chain tracker + * Return: 0 for success, non-zero for failure. + */ +static int +_base_allocate_chain_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) +{ + int i = 0, j = 0; + struct chain_tracker *ctr; + + ioc->chain_dma_pool = dma_pool_create("chain pool", &ioc->pdev->dev, + ioc->chain_segment_sz, 16, 0); + if (!ioc->chain_dma_pool) + return -ENOMEM; + + for (i = 0; i < ioc->scsiio_depth; i++) { + for (j = ioc->chains_per_prp_buffer; + j < ioc->chains_needed_per_io; j++) { + ctr = &ioc->chain_lookup[i].chains_per_smid[j]; + ctr->chain_buffer = dma_pool_alloc(ioc->chain_dma_pool, + GFP_KERNEL, &ctr->chain_buffer_dma); + if (!ctr->chain_buffer) + return -EAGAIN; + if (!mpt3sas_check_same_4gb_region((long) + ctr->chain_buffer, ioc->chain_segment_sz)) { + ioc_err(ioc, + "Chain buffers are not in same 4G !!! Chain buff (0x%p) dma = (0x%llx)\n", + ctr->chain_buffer, + (unsigned long long)ctr->chain_buffer_dma); + ioc->use_32bit_dma = true; + return -EAGAIN; + } + } + } + dinitprintk(ioc, ioc_info(ioc, + "chain_lookup depth (%d), frame_size(%d), pool_size(%d kB)\n", + ioc->scsiio_depth, ioc->chain_segment_sz, ((ioc->scsiio_depth * + (ioc->chains_needed_per_io - ioc->chains_per_prp_buffer) * + ioc->chain_segment_sz))/1024)); + return 0; +} + /** * base_alloc_rdpq_dma_pool - Allocating DMA'able memory * for reply queues. @@ -5578,9 +5624,8 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) u16 max_request_credit, nvme_blocks_needed; unsigned short sg_tablesize; u16 sge_size; - int i, j; + int i; int ret = 0, rc = 0; - struct chain_tracker *ct; dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); @@ -5907,31 +5952,17 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) total_sz += sz * ioc->scsiio_depth; } - ioc->chain_dma_pool = dma_pool_create("chain pool", &ioc->pdev->dev, - ioc->chain_segment_sz, 16, 0); - if (!ioc->chain_dma_pool) { - ioc_err(ioc, "chain_dma_pool: dma_pool_create failed\n"); - goto out; - } - for (i = 0; i < ioc->scsiio_depth; i++) { - for (j = ioc->chains_per_prp_buffer; - j < ioc->chains_needed_per_io; j++) { - ct = &ioc->chain_lookup[i].chains_per_smid[j]; - ct->chain_buffer = dma_pool_alloc( - ioc->chain_dma_pool, GFP_KERNEL, - &ct->chain_buffer_dma); - if (!ct->chain_buffer) { - ioc_err(ioc, "chain_lookup: pci_pool_alloc failed\n"); - goto out; - } - } - total_sz += ioc->chain_segment_sz; - } - + rc = _base_allocate_chain_dma_pool(ioc, ioc->chain_segment_sz); + if (rc == -ENOMEM) + return -ENOMEM; + else if (rc == -EAGAIN) + goto try_32bit_dma; + total_sz += ioc->chain_segment_sz * ((ioc->chains_needed_per_io - + ioc->chains_per_prp_buffer) * ioc->scsiio_depth); dinitprintk(ioc, - ioc_info(ioc, "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n", - ioc->chain_depth, ioc->chain_segment_sz, - (ioc->chain_depth * ioc->chain_segment_sz) / 1024)); + ioc_info(ioc, "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n", + ioc->chain_depth, ioc->chain_segment_sz, + (ioc->chain_depth * ioc->chain_segment_sz) / 1024)); /* sense buffers, 4 byte align */ sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE; -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 970ac2bb70e79a90eeb75496a523b8f1705d7a8c upstream. According to the MPI specification, sense buffers can not cross a 4 GB boundary. While allocating, if any buffer crosses the 4 GB boundary, then: - Release the already allocated memory pools; and - Reallocate them by changing the DMA coherent mask to 32-bit Link: https://lore.kernel.org/r/20210305102904.7560-4-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 86 ++++++++++++++--------------- 1 file changed, 40 insertions(+), 46 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 10ef9fd2f830..70cfdef50f78 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5527,6 +5527,38 @@ _base_allocate_chain_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) return 0; } +/** + * _base_allocate_sense_dma_pool - Allocating DMA'able memory + * for sense dma pool. + * @ioc: Adapter object + * @sz: DMA Pool size + * Return: 0 for success, non-zero for failure. + */ +static int +_base_allocate_sense_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) +{ + ioc->sense_dma_pool = + dma_pool_create("sense pool", &ioc->pdev->dev, sz, 4, 0); + if (!ioc->sense_dma_pool) + return -ENOMEM; + ioc->sense = dma_pool_alloc(ioc->sense_dma_pool, + GFP_KERNEL, &ioc->sense_dma); + if (!ioc->sense) + return -EAGAIN; + if (!mpt3sas_check_same_4gb_region((long)ioc->sense, sz)) { + dinitprintk(ioc, pr_err( + "Bad Sense Pool! sense (0x%p) sense_dma = (0x%llx)\n", + ioc->sense, (unsigned long long) ioc->sense_dma)); + ioc->use_32bit_dma = true; + return -EAGAIN; + } + ioc_info(ioc, + "sense pool(0x%p) - dma(0x%llx): depth(%d), element_size(%d), pool_size (%d kB)\n", + ioc->sense, (unsigned long long)ioc->sense_dma, + ioc->scsiio_depth, SCSI_SENSE_BUFFERSIZE, sz/1024); + return 0; +} + /** * base_alloc_rdpq_dma_pool - Allocating DMA'able memory * for reply queues. @@ -5620,7 +5652,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) u16 chains_needed_per_io; u32 sz, total_sz, reply_post_free_sz, reply_post_free_array_sz; u32 retry_sz; - u32 rdpq_sz = 0; + u32 rdpq_sz = 0, sense_sz = 0; u16 max_request_credit, nvme_blocks_needed; unsigned short sg_tablesize; u16 sge_size; @@ -5963,58 +5995,20 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->chain_depth, ioc->chain_segment_sz, (ioc->chain_depth * ioc->chain_segment_sz) / 1024)); - /* sense buffers, 4 byte align */ - sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE; - ioc->sense_dma_pool = dma_pool_create("sense pool", &ioc->pdev->dev, sz, - 4, 0); - if (!ioc->sense_dma_pool) { - ioc_err(ioc, "sense pool: dma_pool_create failed\n"); - goto out; - } - ioc->sense = dma_pool_alloc(ioc->sense_dma_pool, GFP_KERNEL, - &ioc->sense_dma); - if (!ioc->sense) { - ioc_err(ioc, "sense pool: dma_pool_alloc failed\n"); - goto out; - } - /* sense buffer requires to be in same 4 gb region. - * Below function will check the same. - * In case of failure, new pci pool will be created with updated - * alignment. Older allocation and pool will be destroyed. - * Alignment will be used such a way that next allocation if - * success, will always meet same 4gb region requirement. - * Actual requirement is not alignment, but we need start and end of - * DMA address must have same upper 32 bit address. - */ - if (!mpt3sas_check_same_4gb_region((long)ioc->sense, sz)) { - //Release Sense pool & Reallocate - dma_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); - dma_pool_destroy(ioc->sense_dma_pool); - ioc->sense = NULL; - - ioc->sense_dma_pool = - dma_pool_create("sense pool", &ioc->pdev->dev, sz, - roundup_pow_of_two(sz), 0); - if (!ioc->sense_dma_pool) { - ioc_err(ioc, "sense pool: pci_pool_create failed\n"); - goto out; - } - ioc->sense = dma_pool_alloc(ioc->sense_dma_pool, GFP_KERNEL, - &ioc->sense_dma); - if (!ioc->sense) { - ioc_err(ioc, "sense pool: pci_pool_alloc failed\n"); - goto out; - } - } + sense_sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE; + rc = _base_allocate_sense_dma_pool(ioc, sense_sz); + if (rc == -ENOMEM) + return -ENOMEM; + else if (rc == -EAGAIN) + goto try_32bit_dma; + total_sz += sense_sz; ioc_info(ioc, "sense pool(0x%p)- dma(0x%llx): depth(%d)," "element_size(%d), pool_size(%d kB)\n", ioc->sense, (unsigned long long)ioc->sense_dma, ioc->scsiio_depth, SCSI_SENSE_BUFFERSIZE, sz / 1024); - total_sz += sz; - /* reply pool, 4 byte align */ sz = ioc->reply_free_queue_depth * ioc->reply_sz; ioc->reply_dma_pool = dma_pool_create("reply pool", &ioc->pdev->dev, sz, -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 58501fd9375f76369c602a0b751a95d3376878e2 upstream. According to the MPI specification, reply buffers can not cross a 4 GB boundary. While allocating, if any buffer crosses the 4 GB boundary, then: - Release the already allocated memory pools; and - Reallocate them by changing the DMA coherent mask to 32-bit Link: https://lore.kernel.org/r/20210305102904.7560-5-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 63 ++++++++++++++++++----------- 1 file changed, 40 insertions(+), 23 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 70cfdef50f78..08ecdaf52059 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5559,6 +5559,41 @@ _base_allocate_sense_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) return 0; } +/** + * _base_allocate_reply_pool - Allocating DMA'able memory + * for reply pool. + * @ioc: Adapter object + * @sz: DMA Pool size + * Return: 0 for success, non-zero for failure. + */ +static int +_base_allocate_reply_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) +{ + /* reply pool, 4 byte align */ + ioc->reply_dma_pool = dma_pool_create("reply pool", + &ioc->pdev->dev, sz, 4, 0); + if (!ioc->reply_dma_pool) + return -ENOMEM; + ioc->reply = dma_pool_alloc(ioc->reply_dma_pool, GFP_KERNEL, + &ioc->reply_dma); + if (!ioc->reply) + return -EAGAIN; + if (!mpt3sas_check_same_4gb_region((long)ioc->reply_free, sz)) { + dinitprintk(ioc, pr_err( + "Bad Reply Pool! Reply (0x%p) Reply dma = (0x%llx)\n", + ioc->reply, (unsigned long long) ioc->reply_dma)); + ioc->use_32bit_dma = true; + return -EAGAIN; + } + ioc->reply_dma_min_address = (u32)(ioc->reply_dma); + ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz; + ioc_info(ioc, + "reply pool(0x%p) - dma(0x%llx): depth(%d), frame_size(%d), pool_size(%d kB)\n", + ioc->reply, (unsigned long long)ioc->reply_dma, + ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024); + return 0; +} + /** * base_alloc_rdpq_dma_pool - Allocating DMA'able memory * for reply queues. @@ -6008,32 +6043,14 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) "element_size(%d), pool_size(%d kB)\n", ioc->sense, (unsigned long long)ioc->sense_dma, ioc->scsiio_depth, SCSI_SENSE_BUFFERSIZE, sz / 1024); - /* reply pool, 4 byte align */ sz = ioc->reply_free_queue_depth * ioc->reply_sz; - ioc->reply_dma_pool = dma_pool_create("reply pool", &ioc->pdev->dev, sz, - 4, 0); - if (!ioc->reply_dma_pool) { - ioc_err(ioc, "reply pool: dma_pool_create failed\n"); - goto out; - } - ioc->reply = dma_pool_alloc(ioc->reply_dma_pool, GFP_KERNEL, - &ioc->reply_dma); - if (!ioc->reply) { - ioc_err(ioc, "reply pool: dma_pool_alloc failed\n"); - goto out; - } - ioc->reply_dma_min_address = (u32)(ioc->reply_dma); - ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz; - dinitprintk(ioc, - ioc_info(ioc, "reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n", - ioc->reply, ioc->reply_free_queue_depth, - ioc->reply_sz, sz / 1024)); - dinitprintk(ioc, - ioc_info(ioc, "reply_dma(0x%llx)\n", - (unsigned long long)ioc->reply_dma)); + rc = _base_allocate_reply_pool(ioc, sz); + if (rc == -ENOMEM) + return -ENOMEM; + else if (rc == -EAGAIN) + goto try_32bit_dma; total_sz += sz; - /* reply free queue, 16 byte align */ sz = ioc->reply_free_queue_depth * 4; ioc->reply_free_dma_pool = dma_pool_create("reply_free pool", -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 2e4e8587327b37431e3205d09f541420d9d19266 upstream. According to the MPI specification, reply post buffers can not cross a 4 GB boundary. While allocating, if any buffer crosses the 4 GB boundary, then: - Release the already allocated memory pools; and - Reallocate them by changing the DMA coherent mask to 32-bit Link: https://lore.kernel.org/r/20210305102904.7560-6-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 59 ++++++++++++++++++++--------- 1 file changed, 42 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 08ecdaf52059..5efe09f73455 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5594,6 +5594,42 @@ _base_allocate_reply_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) return 0; } +/** + * _base_allocate_reply_free_dma_pool - Allocating DMA'able memory + * for reply free dma pool. + * @ioc: Adapter object + * @sz: DMA Pool size + * Return: 0 for success, non-zero for failure. + */ +static int +_base_allocate_reply_free_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) +{ + /* reply free queue, 16 byte align */ + ioc->reply_free_dma_pool = dma_pool_create( + "reply_free pool", &ioc->pdev->dev, sz, 16, 0); + if (!ioc->reply_free_dma_pool) + return -ENOMEM; + ioc->reply_free = dma_pool_alloc(ioc->reply_free_dma_pool, + GFP_KERNEL, &ioc->reply_free_dma); + if (!ioc->reply_free) + return -EAGAIN; + if (!mpt3sas_check_same_4gb_region((long)ioc->reply_free, sz)) { + dinitprintk(ioc, + pr_err("Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n", + ioc->reply_free, (unsigned long long) ioc->reply_free_dma)); + ioc->use_32bit_dma = true; + return -EAGAIN; + } + memset(ioc->reply_free, 0, sz); + dinitprintk(ioc, ioc_info(ioc, + "reply_free pool(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n", + ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024)); + dinitprintk(ioc, ioc_info(ioc, + "reply_free_dma (0x%llx)\n", + (unsigned long long)ioc->reply_free_dma)); + return 0; +} + /** * base_alloc_rdpq_dma_pool - Allocating DMA'able memory * for reply queues. @@ -6051,29 +6087,18 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) else if (rc == -EAGAIN) goto try_32bit_dma; total_sz += sz; + /* reply free queue, 16 byte align */ sz = ioc->reply_free_queue_depth * 4; - ioc->reply_free_dma_pool = dma_pool_create("reply_free pool", - &ioc->pdev->dev, sz, 16, 0); - if (!ioc->reply_free_dma_pool) { - ioc_err(ioc, "reply_free pool: dma_pool_create failed\n"); - goto out; - } - ioc->reply_free = dma_pool_zalloc(ioc->reply_free_dma_pool, GFP_KERNEL, - &ioc->reply_free_dma); - if (!ioc->reply_free) { - ioc_err(ioc, "reply_free pool: dma_pool_alloc failed\n"); - goto out; - } - dinitprintk(ioc, - ioc_info(ioc, "reply_free pool(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n", - ioc->reply_free, ioc->reply_free_queue_depth, - 4, sz / 1024)); + rc = _base_allocate_reply_free_dma_pool(ioc, sz); + if (rc == -ENOMEM) + return -ENOMEM; + else if (rc == -EAGAIN) + goto try_32bit_dma; dinitprintk(ioc, ioc_info(ioc, "reply_free_dma (0x%llx)\n", (unsigned long long)ioc->reply_free_dma)); total_sz += sz; - if (ioc->rdpq_array_enable) { reply_post_free_array_sz = ioc->reply_queue_count * sizeof(Mpi2IOCInitRDPQArrayEntry); -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit c569de899bb41b7e8302636a76bf73bbdb80075a upstream. According to the MPI specification, reply post array buffers can not cross a 4 GB boundary. While allocating, if any buffer crosses the 4 GB boundary, then: - Release the already allocated memory pools; and - Reallocate them by changing the DMA coherent mask to 32-bit Link: https://lore.kernel.org/r/20210305102904.7560-7-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 55 ++++++++++++++++++++--------- 1 file changed, 39 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 5efe09f73455..6486f89828eb 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5630,6 +5630,39 @@ _base_allocate_reply_free_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) return 0; } +/** + * _base_allocate_reply_post_free_array - Allocating DMA'able memory + * for reply post free array. + * @ioc: Adapter object + * @reply_post_free_array_sz: DMA Pool size + * Return: 0 for success, non-zero for failure. + */ + +static int +_base_allocate_reply_post_free_array(struct MPT3SAS_ADAPTER *ioc, + u32 reply_post_free_array_sz) +{ + ioc->reply_post_free_array_dma_pool = + dma_pool_create("reply_post_free_array pool", + &ioc->pdev->dev, reply_post_free_array_sz, 16, 0); + if (!ioc->reply_post_free_array_dma_pool) + return -ENOMEM; + ioc->reply_post_free_array = + dma_pool_alloc(ioc->reply_post_free_array_dma_pool, + GFP_KERNEL, &ioc->reply_post_free_array_dma); + if (!ioc->reply_post_free_array) + return -EAGAIN; + if (!mpt3sas_check_same_4gb_region((long)ioc->reply_post_free_array, + reply_post_free_array_sz)) { + dinitprintk(ioc, pr_err( + "Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n", + ioc->reply_free, + (unsigned long long) ioc->reply_free_dma)); + ioc->use_32bit_dma = true; + return -EAGAIN; + } + return 0; +} /** * base_alloc_rdpq_dma_pool - Allocating DMA'able memory * for reply queues. @@ -6102,22 +6135,12 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) if (ioc->rdpq_array_enable) { reply_post_free_array_sz = ioc->reply_queue_count * sizeof(Mpi2IOCInitRDPQArrayEntry); - ioc->reply_post_free_array_dma_pool = - dma_pool_create("reply_post_free_array pool", - &ioc->pdev->dev, reply_post_free_array_sz, 16, 0); - if (!ioc->reply_post_free_array_dma_pool) { - dinitprintk(ioc, - ioc_info(ioc, "reply_post_free_array pool: dma_pool_create failed\n")); - goto out; - } - ioc->reply_post_free_array = - dma_pool_alloc(ioc->reply_post_free_array_dma_pool, - GFP_KERNEL, &ioc->reply_post_free_array_dma); - if (!ioc->reply_post_free_array) { - dinitprintk(ioc, - ioc_info(ioc, "reply_post_free_array pool: dma_pool_alloc failed\n")); - goto out; - } + rc = _base_allocate_reply_post_free_array(ioc, + reply_post_free_array_sz); + if (rc == -ENOMEM) + return -ENOMEM; + else if (rc == -EAGAIN) + goto try_32bit_dma; } ioc->config_page_sz = 512; ioc->config_page = dma_alloc_coherent(&ioc->pdev->dev, -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 37067b97930931c3fe77cf8a3a6d6d43b708808b upstream. Update driver version to 37.101.00.00. Link: https://lore.kernel.org/r/20210305102904.7560-8-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index e33cb9d60d8a..00b823174669 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -77,9 +77,9 @@ #define MPT3SAS_DRIVER_NAME "mpt3sas" #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "37.100.00.00" +#define MPT3SAS_DRIVER_VERSION "37.101.00.00" #define MPT3SAS_MAJOR_VERSION 37 -#define MPT3SAS_MINOR_VERSION 100 +#define MPT3SAS_MINOR_VERSION 101 #define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 -- 2.33.0
From: Lee Jones <lee.jones@linaro.org> Commit a8d548b0b3eea1d2bd35aec8900d8f11f2e4c3f1 upstream. Fixes the following W=1 kernel build warning(s): drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: Function parameter or member 'sas_address' not described in '__mpt3sas_get_sdev_by_addr' drivers/scsi/mpt3sas/mpt3sas_scsih.c:763: warning: expecting prototype for mpt3sas_get_sdev_by_addr(). Prototype was for __mpt3sas_get_sdev_by_addr() instead drivers/scsi/mpt3sas/mpt3sas_scsih.c:4535: warning: expecting prototype for _scsih_check_for_pending_internal_cmds(). Prototype was for mpt3sas_check_for_pending_internal_cmds() instead drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'port_entry' not described in '_scsih_look_and_get_matched_port_entry' drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'matched_port_entry' not described in '_scsih_look_and_get_matched_port_entry' drivers/scsi/mpt3sas/mpt3sas_scsih.c:6188: warning: Function parameter or member 'count' not described in '_scsih_look_and_get_matched_port_entry' drivers/scsi/mpt3sas/mpt3sas_scsih.c:6959: warning: Function parameter or member 'port' not described in 'mpt3sas_expander_remove' drivers/scsi/mpt3sas/mpt3sas_scsih.c:10494: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_pre_reset_handler() instead drivers/scsi/mpt3sas/mpt3sas_scsih.c:10536: warning: expecting prototype for mpt3sas_scsih_reset_handler(). Prototype was for mpt3sas_scsih_reset_done_handler() instead drivers/scsi/mpt3sas/mpt3sas_scsih.c:12303: warning: expecting prototype for scsih__ncq_prio_supp(). Prototype was for scsih_ncq_prio_supp() instead Link: https://lore.kernel.org/r/20210317091230.2912389-15-lee.jones@linaro.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@avagotech.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 1db12fab4f8e..f0f4e9a58930 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -749,9 +749,10 @@ __mpt3sas_get_sdev_by_rphy(struct MPT3SAS_ADAPTER *ioc, } /** - * mpt3sas_get_sdev_by_addr - get _sas_device object corresponding to provided + * __mpt3sas_get_sdev_by_addr - get _sas_device object corresponding to provided * sas address from sas_device_list list * @ioc: per adapter object + * @sas_address: device sas address * @port: port number * * Search for _sas_device object corresponding to provided sas address, @@ -4540,7 +4541,7 @@ _scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc, } /** - * _scsih_check_for_pending_internal_cmds - check for pending internal messages + * mpt3sas_check_for_pending_internal_cmds - check for pending internal messages * @ioc: per adapter object * @smid: system request message index * @@ -6196,10 +6197,10 @@ enum hba_port_matched_codes { * _scsih_look_and_get_matched_port_entry - Get matched hba port entry * from HBA port table * @ioc: per adapter object - * @port_entry - hba port entry from temporary port table which needs to be + * @port_entry: hba port entry from temporary port table which needs to be * searched for matched entry in the HBA port table - * @matched_port_entry - save matched hba port entry here - * @count - count of matched entries + * @matched_port_entry: save matched hba port entry here + * @count: count of matched entries * * return type of matched entry found. */ @@ -6976,6 +6977,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle) * mpt3sas_expander_remove - removing expander object * @ioc: per adapter object * @sas_address: expander sas_address + * @port: hba port entry */ void mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address, @@ -10511,7 +10513,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) } /** - * mpt3sas_scsih_reset_handler - reset callback handler (for scsih) + * mpt3sas_scsih_pre_reset_handler - reset callback handler (for scsih) * @ioc: per adapter object * * The handler for doing any required cleanup or initialization. @@ -10552,7 +10554,7 @@ mpt3sas_scsih_clear_outstanding_scsi_tm_commands(struct MPT3SAS_ADAPTER *ioc) } /** - * mpt3sas_scsih_reset_handler - reset callback handler (for scsih) + * mpt3sas_scsih_reset_done_handler - reset callback handler (for scsih) * @ioc: per adapter object * * The handler for doing any required cleanup or initialization. @@ -12325,7 +12327,7 @@ scsih_pci_mmio_enabled(struct pci_dev *pdev) } /** - * scsih__ncq_prio_supp - Check for NCQ command priority support + * scsih_ncq_prio_supp - Check for NCQ command priority support * @sdev: scsi device struct * * This is called when a user indicates they would like to enable -- 2.33.0
From: Bhaskar Chowdhury <unixbhaskar@gmail.com> Commit 206a3afa9482a85e386b8c9e9961489e12027149 upstream. s/encloure/enclosure/ Link: https://lore.kernel.org/r/20210322032145.2242520-1-unixbhaskar@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 6486f89828eb..ff04fee96d0c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5231,7 +5231,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) * mpt3sas_free_enclosure_list - release memory * @ioc: per adapter object * - * Free memory allocated during encloure add. + * Free memory allocated during enclosure add. */ void mpt3sas_free_enclosure_list(struct MPT3SAS_ADAPTER *ioc) -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 4c51f956965120b3441cdd39c358b87daba13e19 upstream. Whenever the driver is adding a vSES to virtual-phys list it is reinitializing the list head. Hence those vSES devices which were added previously are lost. Stop reinitializing the list every time a new vSES device is added. Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.co... Cc: stable@vger.kernel.org #v5.11.10+ Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index f0f4e9a58930..af124a289b9f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -6506,6 +6506,9 @@ _scsih_alloc_vphy(struct MPT3SAS_ADAPTER *ioc, u8 port_id, u8 phy_num) if (!vphy) return NULL; + if (!port->vphys_mask) + INIT_LIST_HEAD(&port->vphys_list); + /* * Enable bit corresponding to HBA phy number on its * parent hba_port object's vphys_mask field. @@ -6513,7 +6516,6 @@ _scsih_alloc_vphy(struct MPT3SAS_ADAPTER *ioc, u8 port_id, u8 phy_num) port->vphys_mask |= (1 << phy_num); vphy->phy_mask |= (1 << phy_num); - INIT_LIST_HEAD(&port->vphys_list); list_add_tail(&vphy->list, &port->vphys_list); ioc_info(ioc, -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit c0629d70ca5570ab75e791e03e6fd11b9c754a6a upstream. Covert ActiveCablePowerRequirement's value to target CPU endian before displaying it. Link: https://lore.kernel.org/r/20210330105106.20569-1-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index af124a289b9f..beebd0b48837 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -10844,7 +10844,8 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, pr_notice("cannot be powered and devices connected\n"); pr_notice("to this active cable will not be seen\n"); pr_notice("This active cable requires %d mW of power\n", - ActiveCableEventData->ActiveCablePowerRequirement); + le32_to_cpu( + ActiveCableEventData->ActiveCablePowerRequirement)); break; case MPI26_EVENT_ACTIVE_CABLE_DEGRADED: -- 2.33.0
From: "Gustavo A. R. Silva" <gustavoars@kernel.org> Commit 16660db3fc2af8664af5e0a3cac69c4a54bfb794 upstream. Fix the following out-of-bounds warnings by embedding existing struct htb_rel_query into struct mpt3_addnl_diag_query, instead of duplicating its members: include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds] include/linux/fortify-string.h:22:29: warning: '__builtin_memset' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds] The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). All those members are exactly the same contained in struct htb_rel_query, so instead of duplicating them into struct mpt3_addnl_diag_query, replace them with new member rel_query of type struct htb_rel_query. So, now that this new object is introduced, memcpy() doesn't overrun the length of &karg.buffer_rel_condition, because the address of the new struct object _rel_query_ is used as destination, instead. The same issue is present when calling memset(), and it is fixed with this same approach. Below is a comparison of struct mpt3_addnl_diag_query, before and after this change (the size and cachelines remain the same): $ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o struct mpt3_addnl_diag_query { struct mpt3_ioctl_header hdr; /* 0 12 */ uint32_t unique_id; /* 12 4 */ uint16_t buffer_rel_condition; /* 16 2 */ uint16_t reserved1; /* 18 2 */ uint32_t trigger_type; /* 20 4 */ uint32_t trigger_info_dwords[2]; /* 24 8 */ uint32_t reserved2[2]; /* 32 8 */ /* size: 40, cachelines: 1, members: 7 */ /* last cacheline: 40 bytes */ }; $ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o struct mpt3_addnl_diag_query { struct mpt3_ioctl_header hdr; /* 0 12 */ uint32_t unique_id; /* 12 4 */ struct htb_rel_query rel_query; /* 16 16 */ uint32_t reserved2[2]; /* 32 8 */ /* size: 40, cachelines: 1, members: 4 */ /* last cacheline: 40 bytes */ }; Also, this helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60659889.bJJILx2THu3hlpxW%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210401162054.GA397186@embeddedor Build-tested-by: kernel test robot <lkp@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 5 ++--- drivers/scsi/mpt3sas/mpt3sas_ctl.h | 12 ++++-------- 2 files changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index e7582fb8a93f..b66140e4c370 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -2507,7 +2507,7 @@ _ctl_addnl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg) __func__, karg.unique_id); return -EPERM; } - memset(&karg.buffer_rel_condition, 0, sizeof(struct htb_rel_query)); + memset(&karg.rel_query, 0, sizeof(karg.rel_query)); if ((ioc->diag_buffer_status[buffer_type] & MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) { ioc_info(ioc, "%s: buffer_type(0x%02x) is not registered\n", @@ -2520,8 +2520,7 @@ _ctl_addnl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg) __func__, buffer_type); return -EPERM; } - memcpy(&karg.buffer_rel_condition, &ioc->htb_rel, - sizeof(struct htb_rel_query)); + memcpy(&karg.rel_query, &ioc->htb_rel, sizeof(karg.rel_query)); out: if (copy_to_user(arg, &karg, sizeof(struct mpt3_addnl_diag_query))) { ioc_err(ioc, "%s: unable to write mpt3_addnl_diag_query data @ %p\n", diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h index d2ccdafb8df2..8f6ffb40261c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h @@ -50,6 +50,8 @@ #include <linux/miscdevice.h> #endif +#include "mpt3sas_base.h" + #ifndef MPT2SAS_MINOR #define MPT2SAS_MINOR (MPT_MINOR + 1) #endif @@ -436,19 +438,13 @@ struct mpt3_diag_read_buffer { * struct mpt3_addnl_diag_query - diagnostic buffer release reason * @hdr - generic header * @unique_id - unique id associated with this buffer. - * @buffer_rel_condition - Release condition ioctl/sysfs/reset - * @reserved1 - * @trigger_type - Master/Event/scsi/MPI - * @trigger_info_dwords - Data Correspondig to trigger type + * @rel_query - release query. * @reserved2 */ struct mpt3_addnl_diag_query { struct mpt3_ioctl_header hdr; uint32_t unique_id; - uint16_t buffer_rel_condition; - uint16_t reserved1; - uint32_t trigger_type; - uint32_t trigger_info_dwords[2]; + struct htb_rel_query rel_query; uint32_t reserved2[2]; }; -- 2.33.0
From: Bart Van Assche <bvanassche@acm.org> Commit 3ad0b1da0da2e073b1c9d2e317a5ebf7704f98e6 upstream. Fix the following warnings: drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool' drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool' Link: https://lore.kernel.org/r/20210415220826.29438-10-bvanassche@acm.org Fixes: d6adc251dd2f ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region") Fixes: 7dd847dae1c4 ("scsi: mpt3sas: Force chain buffer allocations to be within same 4 GB region") Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index ff04fee96d0c..1e3faeaf7ccf 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5422,7 +5422,7 @@ _base_reduce_hba_queue_depth(struct MPT3SAS_ADAPTER *ioc) * for pcie sgl pools. * @ioc: Adapter object * @sz: DMA Pool size - * @ct: Chain tracker + * * Return: 0 for success, non-zero for failure. */ @@ -5486,7 +5486,7 @@ _base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) * for chain dma pool. * @ioc: Adapter object * @sz: DMA Pool size - * @ctr: Chain tracker + * * Return: 0 for success, non-zero for failure. */ static int -- 2.33.0
From: Randy Dunlap <rdunlap@infradead.org> Commit 2910a4a9e90a5853f38766b2e8d025e3bb26d12b upstream. Fix kernel-doc warnings, spellos, and typos. drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool' drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool' mpt3sas_base.c:1362: warning: missing initial short description on line: * _base_display_reply_info - mpt3sas_base.c:2151: warning: contents before sections mpt3sas_base.c:2314: warning: missing initial short description on line: * base_make_prp_nvme - Link: https://lore.kernel.org/r/20210418203246.782-1-rdunlap@infradead.org Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@broadcom.com Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 99 +++++++++++++++-------------- 1 file changed, 50 insertions(+), 49 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 1e3faeaf7ccf..af4f9babf572 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -141,7 +141,7 @@ _base_clear_outstanding_commands(struct MPT3SAS_ADAPTER *ioc); * @mpi_request:mf request pointer. * @sz: size of buffer. * - * @Returns - 1/0 Reset to be done or Not + * Return: 1/0 Reset to be done or Not */ u8 mpt3sas_base_check_cmd_timeout(struct MPT3SAS_ADAPTER *ioc, @@ -440,7 +440,7 @@ static void _clone_sg_entries(struct MPT3SAS_ADAPTER *ioc, return; /* From smid we can get scsi_cmd, once we have sg_scmd, - * we just need to get sg_virt and sg_next to get virual + * we just need to get sg_virt and sg_next to get virtual * address associated with sgel->Address. */ @@ -600,7 +600,7 @@ static int mpt3sas_remove_dead_ioc_func(void *arg) * _base_sync_drv_fw_timestamp - Sync Drive-Fw TimeStamp. * @ioc: Per Adapter Object * - * Return nothing. + * Return: nothing. */ static void _base_sync_drv_fw_timestamp(struct MPT3SAS_ADAPTER *ioc) { @@ -704,7 +704,7 @@ _base_fault_reset_work(struct work_struct *work) /* * Call _scsih_flush_pending_cmds callback so that we flush all - * pending commands back to OS. This call is required to aovid + * pending commands back to OS. This call is required to avoid * deadlock at block layer. Dead IOC will fail to do diag reset, * and this call is safe since dead ioc will never return any * command back from HW. @@ -873,7 +873,7 @@ mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code) * @ioc: per adapter object * @fault_code: fault code * - * Return nothing. + * Return: nothing. */ void mpt3sas_base_coredump_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code) @@ -887,7 +887,7 @@ mpt3sas_base_coredump_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code) * @ioc: per adapter object * @caller: caller function name * - * Returns 0 for success, non-zero for failure. + * Return: 0 for success, non-zero for failure. */ int mpt3sas_base_wait_for_coredump_completion(struct MPT3SAS_ADAPTER *ioc, @@ -1359,11 +1359,11 @@ _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info) } /** - * _base_display_reply_info - + * _base_display_reply_info - handle reply descriptors depending on IOC Status * @ioc: per adapter object * @smid: system request message index * @msix_index: MSIX table index supplied by the OS - * @reply: reply message frame(lower 32bit addr) + * @reply: reply message frame (lower 32bit addr) */ static void _base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, @@ -1804,7 +1804,7 @@ _base_interrupt(int irq, void *bus_id) * @irqpoll: irq_poll object * @budget: irq poll weight * - * returns number of reply descriptors processed + * Return: number of reply descriptors processed */ static int _base_irqpoll(struct irq_poll *irqpoll, int budget) @@ -1826,7 +1826,7 @@ _base_irqpoll(struct irq_poll *irqpoll, int budget) enable_irq(reply_q->os_irq); /* * Go for one more round of processing the - * reply descriptor post queue incase if HBA + * reply descriptor post queue in case the HBA * Firmware has posted some reply descriptors * while reenabling the IRQ. */ @@ -1840,7 +1840,7 @@ _base_irqpoll(struct irq_poll *irqpoll, int budget) * _base_init_irqpolls - initliaze IRQ polls * @ioc: per adapter object * - * returns nothing + * Return: nothing */ static void _base_init_irqpolls(struct MPT3SAS_ADAPTER *ioc) @@ -1878,7 +1878,7 @@ _base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc) * @ioc: per adapter object * @poll: poll over reply descriptor pools incase interrupt for * timed-out SCSI command got delayed - * Context: non ISR conext + * Context: non-ISR context * * Called when a Task Management request has completed. */ @@ -2105,7 +2105,16 @@ _base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge, /** * _base_build_nvme_prp - This function is called for NVMe end devices to build - * a native SGL (NVMe PRP). The native SGL is built starting in the first PRP + * a native SGL (NVMe PRP). + * @ioc: per adapter object + * @smid: system request message index for getting asscociated SGL + * @nvme_encap_request: the NVMe request msg frame pointer + * @data_out_dma: physical address for WRITES + * @data_out_sz: data xfer size for WRITES + * @data_in_dma: physical address for READS + * @data_in_sz: data xfer size for READS + * + * The native SGL is built starting in the first PRP * entry of the NVMe message (PRP1). If the data buffer is small enough to be * described entirely using PRP1, then PRP2 is not used. If needed, PRP2 is * used to describe a larger data buffer. If the data buffer is too large to @@ -2134,7 +2143,7 @@ _base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge, * Each 64-bit PRP entry comprises an address and an offset field. The address * always points at the beginning of a 4KB physical memory page, and the offset * describes where within that 4KB page the memory segment begins. Only the - * first element in a PRP list may contain a non-zero offest, implying that all + * first element in a PRP list may contain a non-zero offset, implying that all * memory segments following the first begin at the start of a 4KB page. * * Each PRP element normally describes 4KB of physical memory, with exceptions @@ -2148,14 +2157,6 @@ _base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge, * Since PRP entries lack any indication of size, the overall data buffer length * is used to determine where the end of the data memory buffer is located, and * how many PRP entries are required to describe it. - * - * @ioc: per adapter object - * @smid: system request message index for getting asscociated SGL - * @nvme_encap_request: the NVMe request msg frame pointer - * @data_out_dma: physical address for WRITES - * @data_out_sz: data xfer size for WRITES - * @data_in_dma: physical address for READS - * @data_in_sz: data xfer size for READS */ static void _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid, @@ -2312,8 +2313,8 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid, } /** - * base_make_prp_nvme - - * Prepare PRPs(Physical Region Page)- SGLs specific to NVMe drives only + * base_make_prp_nvme - Prepare PRPs (Physical Region Page) - + * SGLs specific to NVMe drives only * * @ioc: per adapter object * @scmd: SCSI command from the mid-layer @@ -3156,7 +3157,7 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) * - loaded driver with default max_msix_vectors module parameter and * - system booted in non kdump mode * - * returns nothing. + * Return: nothing. */ static void _base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc, @@ -3369,7 +3370,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc); * and if it is in fault state then issue diag reset. * @ioc: per adapter object * - * Returns: 0 for success, non-zero for failure. + * Return: 0 for success, non-zero for failure. */ static int _base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc) @@ -3634,7 +3635,7 @@ mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr) * @ioc: per adapter object * @scmd: scsi_cmnd object * - * returns msix index of general reply queues, + * Return: msix index of general reply queues, * i.e. reply queue on which IO request's reply * should be posted by the HBA firmware. */ @@ -3664,7 +3665,7 @@ _base_get_msix_index(struct MPT3SAS_ADAPTER *ioc, * @ioc: per adapter object * @scmd: scsi_cmnd object * - * Returns: msix index of high iops reply queues. + * Return: msix index of high iops reply queues. * i.e. high iops reply queue on which IO request's * reply should be posted by the HBA firmware. */ @@ -3911,7 +3912,7 @@ _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) * @ioc: per adapter object * @smid: system request message index * - * returns msix index. + * Return: msix index. */ static u8 _base_set_and_get_msix_index(struct MPT3SAS_ADAPTER *ioc, u16 smid) @@ -4006,7 +4007,7 @@ _base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, * _base_put_smid_hi_priority - send Task Management request to firmware * @ioc: per adapter object * @smid: system request message index - * @msix_task: msix_task will be same as msix of IO incase of task abort else 0. + * @msix_task: msix_task will be same as msix of IO in case of task abort else 0 */ static void _base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid, @@ -4110,7 +4111,7 @@ _base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) * @smid: system request message index * @handle: device handle, unused in this function, for function type match * - * Return nothing. + * Return: nothing. */ static void _base_put_smid_scsi_io_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, @@ -4132,7 +4133,7 @@ _base_put_smid_scsi_io_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, * @ioc: per adapter object * @smid: system request message index * @handle: device handle, unused in this function, for function type match - * Return nothing + * Return: nothing */ static void _base_put_smid_fast_path_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, @@ -4153,9 +4154,9 @@ _base_put_smid_fast_path_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, * firmware using Atomic Request Descriptor * @ioc: per adapter object * @smid: system request message index - * @msix_task: msix_task will be same as msix of IO incase of task abort else 0 + * @msix_task: msix_task will be same as msix of IO in case of task abort else 0 * - * Return nothing. + * Return: nothing. */ static void _base_put_smid_hi_priority_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, @@ -4177,7 +4178,7 @@ _base_put_smid_hi_priority_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, * @ioc: per adapter object * @smid: system request message index * - * Return nothing. + * Return: nothing. */ static void _base_put_smid_default_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid) @@ -4548,7 +4549,7 @@ _base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc) } /** - * _base_display_ioc_capabilities - Disply IOC's capabilities. + * _base_display_ioc_capabilities - Display IOC's capabilities. * @ioc: per adapter object */ static void @@ -4751,7 +4752,7 @@ mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, * according to performance mode. * @ioc : per adapter object * - * Return nothing. + * Return: nothing. */ static void _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) @@ -4816,7 +4817,7 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) * persistent pages * @ioc : per adapter object * - * Return nothing. + * Return: nothing. */ static void _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) @@ -4867,7 +4868,7 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) * persistent pages * @ioc : per adapter object * - * Return nothing. + * Return: nothing. */ static void _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) @@ -4918,7 +4919,7 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) * persistent pages * @ioc : per adapter object * - * Return nothing. + * Return: nothing. */ static void _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) @@ -4971,7 +4972,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) * persistent pages * @ioc : per adapter object * - * Return nothing. + * Return: nothing. */ static void _base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc) @@ -5007,8 +5008,8 @@ _base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc) * driver trigger pages or not * @ioc : per adapter object * - * Returns trigger flags mask if HBA FW supports driver trigger pages, - * otherwise returns EFAULT. + * Return: trigger flags mask if HBA FW supports driver trigger pages, + * otherwise returns %-EFAULT. */ static int _base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc) @@ -5036,7 +5037,7 @@ _base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc) * persistent pages. * @ioc : per adapter object * - * Return nothing. + * Return: nothing. */ static void _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) @@ -5089,11 +5090,11 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) /** * _base_update_diag_trigger_pages - Update the driver trigger pages after - * online FW update, incase updated FW supports driver + * online FW update, in case updated FW supports driver * trigger pages. * @ioc : per adapter object * - * Return nothing. + * Return: nothing. */ static void _base_update_diag_trigger_pages(struct MPT3SAS_ADAPTER *ioc) @@ -6234,7 +6235,7 @@ _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout) * _base_dump_reg_set - This function will print hexdump of register set. * @ioc: per adapter object * - * Returns nothing. + * Return: nothing. */ static inline void _base_dump_reg_set(struct MPT3SAS_ADAPTER *ioc) @@ -6468,7 +6469,7 @@ _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout) * * Return: Waits up to timeout seconds for the IOC to * become operational. Returns 0 if IOC is present - * and operational; otherwise returns -EFAULT. + * and operational; otherwise returns %-EFAULT. */ int @@ -7869,7 +7870,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) /* * In SAS3.0, * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and - * Target Status - all require the IEEE formated scatter gather + * Target Status - all require the IEEE formatted scatter gather * elements. */ ioc->build_sg_scmd = &_base_build_sg_scmd_ieee; -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 19a622c39a9d497d3c06ffe9068ee4c7bbd2bdcc upstream. During first half of IOC initialization (i.e. before going for device scanning), if any firmware fault occurs then driver is aborting the IOC initialization operation. Modify the driver to issue a diag reset operation to recover IOC from fault state and reinitialize the IOC. Link: https://lore.kernel.org/r/20210518051625.1596742-3-suganath-prabu.subramani@... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 253 ++++++++++++++++++-------- drivers/scsi/mpt3sas/mpt3sas_base.h | 7 + drivers/scsi/mpt3sas/mpt3sas_config.c | 18 +- 3 files changed, 201 insertions(+), 77 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index af4f9babf572..1c1c9e13dfc4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -3366,14 +3366,14 @@ static int _base_diag_reset(struct MPT3SAS_ADAPTER *ioc); /** - * _base_check_for_fault_and_issue_reset - check if IOC is in fault state + * mpt3sas_base_check_for_fault_and_issue_reset - check if IOC is in fault state * and if it is in fault state then issue diag reset. * @ioc: per adapter object * * Return: 0 for success, non-zero for failure. */ -static int -_base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc) +int +mpt3sas_base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc) { u32 ioc_state; int rc = -EFAULT; @@ -3387,12 +3387,14 @@ _base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc) if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mpt3sas_print_fault_code(ioc, ioc_state & MPI2_DOORBELL_DATA_MASK); + mpt3sas_base_mask_interrupts(ioc); rc = _base_diag_reset(ioc); } else if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_COREDUMP) { mpt3sas_print_coredump_info(ioc, ioc_state & MPI2_DOORBELL_DATA_MASK); mpt3sas_base_wait_for_coredump_completion(ioc, __func__); + mpt3sas_base_mask_interrupts(ioc); rc = _base_diag_reset(ioc); } @@ -3474,7 +3476,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) r = _base_get_ioc_facts(ioc); if (r) { - rc = _base_check_for_fault_and_issue_reset(ioc); + rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc); if (rc || (_base_get_ioc_facts(ioc))) goto out_fail; } @@ -4455,7 +4457,7 @@ _base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc) Mpi26ComponentImageHeader_t *cmp_img_hdr; Mpi25FWUploadRequest_t *mpi_request; Mpi2FWUploadReply_t mpi_reply; - int r = 0; + int r = 0, issue_diag_reset = 0; u32 package_version = 0; void *fwpkg_data = NULL; dma_addr_t fwpkg_data_dma; @@ -4505,7 +4507,7 @@ _base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc) ioc_err(ioc, "%s: timeout\n", __func__); _debug_dump_mf(mpi_request, sizeof(Mpi25FWUploadRequest_t)/4); - r = -ETIME; + issue_diag_reset = 1; } else { memset(&mpi_reply, 0, sizeof(Mpi2FWUploadReply_t)); if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) { @@ -4545,6 +4547,13 @@ _base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc) if (fwpkg_data) dma_free_coherent(&ioc->pdev->dev, data_length, fwpkg_data, fwpkg_data_dma); + if (issue_diag_reset) { + if (ioc->drv_internal_flags & MPT_DRV_INTERNAL_FIRST_PE_ISSUED) + return -EFAULT; + if (mpt3sas_base_check_for_fault_and_issue_reset(ioc)) + return -EFAULT; + r = -EAGAIN; + } return r; } @@ -4752,15 +4761,19 @@ mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, * according to performance mode. * @ioc : per adapter object * - * Return: nothing. + * Return: zero on success; otherwise return EAGAIN error code asking the + * caller to retry. */ -static void +static int _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) { Mpi2IOCPage1_t ioc_pg1; Mpi2ConfigReply_t mpi_reply; + int rc; - mpt3sas_config_get_ioc_pg1(ioc, &mpi_reply, &ioc->ioc_pg1_copy); + rc = mpt3sas_config_get_ioc_pg1(ioc, &mpi_reply, &ioc->ioc_pg1_copy); + if (rc) + return rc; memcpy(&ioc_pg1, &ioc->ioc_pg1_copy, sizeof(Mpi2IOCPage1_t)); switch (perf_mode) { @@ -4782,9 +4795,11 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) */ ioc_pg1.ProductSpecific = cpu_to_le32(0x80000000 | ((1 << MPT3SAS_HIGH_IOPS_REPLY_QUEUES/8) - 1)); - mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); + rc = mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); + if (rc) + return rc; ioc_info(ioc, "performance mode: balanced\n"); - return; + return 0; } fallthrough; case MPT_PERF_MODE_LATENCY: @@ -4795,7 +4810,9 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) ioc_pg1.CoalescingTimeout = cpu_to_le32(0xa); ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING); ioc_pg1.ProductSpecific = 0; - mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); + rc = mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); + if (rc) + return rc; ioc_info(ioc, "performance mode: latency\n"); break; case MPT_PERF_MODE_IOPS: @@ -4807,9 +4824,12 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) le32_to_cpu(ioc_pg1.CoalescingTimeout)); ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING); ioc_pg1.ProductSpecific = 0; - mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); + rc = mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); + if (rc) + return rc; break; } + return 0; } /** @@ -4819,7 +4839,7 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) * * Return: nothing. */ -static void +static int _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { Mpi26DriverTriggerPage2_t trigger_pg2; @@ -4833,7 +4853,7 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) r = mpt3sas_config_get_driver_trigger_pg2(ioc, &mpi_reply, &trigger_pg2); if (r) - return; + return r; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; @@ -4842,7 +4862,7 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) ioc_err(ioc, "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n", __func__, ioc_status)); - return; + return 0; } if (le16_to_cpu(trigger_pg2.NumMPIEventTrigger)) { @@ -4861,6 +4881,7 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) mpi_event_tg++; } } + return 0; } /** @@ -4868,9 +4889,9 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) * persistent pages * @ioc : per adapter object * - * Return: nothing. + * Return: 0 on success; otherwise return failure status. */ -static void +static int _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { Mpi26DriverTriggerPage3_t trigger_pg3; @@ -4884,7 +4905,7 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) r = mpt3sas_config_get_driver_trigger_pg3(ioc, &mpi_reply, &trigger_pg3); if (r) - return; + return r; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; @@ -4893,7 +4914,7 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) ioc_err(ioc, "%s: Failed to get trigger pg3, ioc_status(0x%04x)\n", __func__, ioc_status)); - return; + return 0; } if (le16_to_cpu(trigger_pg3.NumSCSISenseTrigger)) { @@ -4912,6 +4933,7 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) mpi_scsi_tg++; } } + return 0; } /** @@ -4919,9 +4941,9 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) * persistent pages * @ioc : per adapter object * - * Return: nothing. + * Return: 0 on success; otherwise return failure status. */ -static void +static int _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { Mpi26DriverTriggerPage4_t trigger_pg4; @@ -4935,7 +4957,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) r = mpt3sas_config_get_driver_trigger_pg4(ioc, &mpi_reply, &trigger_pg4); if (r) - return; + return r; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; @@ -4944,7 +4966,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) ioc_err(ioc, "%s: Failed to get trigger pg4, ioc_status(0x%04x)\n", __func__, ioc_status)); - return; + return 0; } if (le16_to_cpu(trigger_pg4.NumIOCStatusLogInfoTrigger)) { @@ -4965,6 +4987,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) mpi_status_tg++; } } + return 0; } /** @@ -4974,7 +4997,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) * * Return: nothing. */ -static void +static int _base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { Mpi26DriverTriggerPage1_t trigger_pg1; @@ -4985,7 +5008,7 @@ _base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc) r = mpt3sas_config_get_driver_trigger_pg1(ioc, &mpi_reply, &trigger_pg1); if (r) - return; + return r; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; @@ -4994,25 +5017,30 @@ _base_get_master_diag_triggers(struct MPT3SAS_ADAPTER *ioc) ioc_err(ioc, "%s: Failed to get trigger pg1, ioc_status(0x%04x)\n", __func__, ioc_status)); - return; + return 0; } if (le16_to_cpu(trigger_pg1.NumMasterTrigger)) ioc->diag_trigger_master.MasterData |= le32_to_cpu( trigger_pg1.MasterTriggers[0].MasterTriggerFlags); + return 0; } /** * _base_check_for_trigger_pages_support - checks whether HBA FW supports * driver trigger pages or not * @ioc : per adapter object + * @trigger_flags : address where trigger page0's TriggerFlags value is copied + * + * Return: trigger flags mask if HBA FW supports driver trigger pages; + * otherwise returns %-EFAULT if driver trigger pages are not supported by FW or + * return EAGAIN if diag reset occurred due to FW fault and asking the + * caller to retry the command. * - * Return: trigger flags mask if HBA FW supports driver trigger pages, - * otherwise returns %-EFAULT. */ static int -_base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc) +_base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc, u32 *trigger_flags) { Mpi26DriverTriggerPage0_t trigger_pg0; int r = 0; @@ -5022,14 +5050,15 @@ _base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc) r = mpt3sas_config_get_driver_trigger_pg0(ioc, &mpi_reply, &trigger_pg0); if (r) - return -EFAULT; + return r; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) return -EFAULT; - return le16_to_cpu(trigger_pg0.TriggerFlags); + *trigger_flags = le16_to_cpu(trigger_pg0.TriggerFlags); + return 0; } /** @@ -5037,12 +5066,14 @@ _base_check_for_trigger_pages_support(struct MPT3SAS_ADAPTER *ioc) * persistent pages. * @ioc : per adapter object * - * Return: nothing. + * Return: zero on success; otherwise return EAGAIN error codes + * asking the caller to retry. */ -static void +static int _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { int trigger_flags; + int r; /* * Default setting of master trigger. @@ -5050,9 +5081,16 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) ioc->diag_trigger_master.MasterData = (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET); - trigger_flags = _base_check_for_trigger_pages_support(ioc); - if (trigger_flags < 0) - return; + r = _base_check_for_trigger_pages_support(ioc, &trigger_flags); + if (r) { + if (r == -EAGAIN) + return r; + /* + * Don't go for error handling when FW doesn't support + * driver trigger pages. + */ + return 0; + } ioc->supports_trigger_pages = 1; @@ -5061,31 +5099,44 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc) * if master trigger bit enabled in TriggerFlags. */ if ((u16)trigger_flags & - MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID) - _base_get_master_diag_triggers(ioc); + MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID) { + r = _base_get_master_diag_triggers(ioc); + if (r) + return r; + } /* * Retrieve event diag trigger values from driver trigger pg2 * if event trigger bit enabled in TriggerFlags. */ if ((u16)trigger_flags & - MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID) - _base_get_event_diag_triggers(ioc); + MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID) { + r = _base_get_event_diag_triggers(ioc); + if (r) + return r; + } /* * Retrieve scsi diag trigger values from driver trigger pg3 * if scsi trigger bit enabled in TriggerFlags. */ if ((u16)trigger_flags & - MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID) - _base_get_scsi_diag_triggers(ioc); + MPI26_DRIVER_TRIGGER0_FLAG_SCSI_SENSE_TRIGGER_VALID) { + r = _base_get_scsi_diag_triggers(ioc); + if (r) + return r; + } /* * Retrieve mpi error diag trigger values from driver trigger pg4 * if loginfo trigger bit enabled in TriggerFlags. */ if ((u16)trigger_flags & - MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID) - _base_get_mpi_diag_triggers(ioc); + MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID) { + r = _base_get_mpi_diag_triggers(ioc); + if (r) + return r; + } + return 0; } /** @@ -5121,23 +5172,33 @@ _base_update_diag_trigger_pages(struct MPT3SAS_ADAPTER *ioc) * _base_static_config_pages - static start of day config pages * @ioc: per adapter object */ -static void +static int _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) { Mpi2ConfigReply_t mpi_reply; u32 iounit_pg1_flags; int tg_flags = 0; + int rc; ioc->nvme_abort_timeout = 30; - mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); - if (ioc->ir_firmware) - mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply, - &ioc->manu_pg10); + rc = mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, + &ioc->manu_pg0); + if (rc) + return rc; + if (ioc->ir_firmware) { + rc = mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply, + &ioc->manu_pg10); + if (rc) + return rc; + } /* * Ensure correct T10 PI operation if vendor left EEDPTagMode * flag unset in NVDATA. */ - mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11); + rc = mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, + &ioc->manu_pg11); + if (rc) + return rc; if (!ioc->is_gen35_ioc && ioc->manu_pg11.EEDPTagMode == 0) { pr_err("%s: overriding NVDATA EEDPTagMode setting\n", ioc->name); @@ -5176,12 +5237,24 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) ioc_warn(ioc, "TimeSync Interval in Manuf page-11 is not enabled. Periodic Time-Sync will be disabled\n"); } - mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); - mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); - mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); - mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); - mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); - mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8); + rc = mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); + if (rc) + return rc; + rc = mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); + if (rc) + return rc; + rc = mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); + if (rc) + return rc; + rc = mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); + if (rc) + return rc; + rc = mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + if (rc) + return rc; + rc = mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8); + if (rc) + return rc; _base_display_ioc_capabilities(ioc); /* @@ -5197,16 +5270,23 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) iounit_pg1_flags |= MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); - mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + rc = mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); + if (rc) + return rc; if (ioc->iounit_pg8.NumSensors) ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors; - if (ioc->is_aero_ioc) - _base_update_ioc_page1_inlinewith_perf_mode(ioc); + if (ioc->is_aero_ioc) { + rc = _base_update_ioc_page1_inlinewith_perf_mode(ioc); + if (rc) + return rc; + } if (ioc->is_gen35_ioc) { - if (ioc->is_driver_loading) - _base_get_diag_triggers(ioc); - else { + if (ioc->is_driver_loading) { + rc = _base_get_diag_triggers(ioc); + if (rc) + return rc; + } else { /* * In case of online HBA FW update operation, * check whether updated FW supports the driver trigger @@ -5218,7 +5298,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) * and new FW doesn't support them then disable * support_trigger_pages flag. */ - tg_flags = _base_check_for_trigger_pages_support(ioc); + _base_check_for_trigger_pages_support(ioc, &tg_flags); if (!ioc->supports_trigger_pages && tg_flags != -EFAULT) _base_update_diag_trigger_pages(ioc); else if (ioc->supports_trigger_pages && @@ -5226,6 +5306,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) ioc->supports_trigger_pages = 0; } } + return 0; } /** @@ -6482,6 +6563,17 @@ mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int timeout) ioc_state = mpt3sas_base_get_iocstate(ioc, 1); if (ioc_state == MPI2_IOC_STATE_OPERATIONAL) break; + + /* + * Watchdog thread will be started after IOC Initialization, so + * no need to wait here for IOC state to become operational + * when IOC Initialization is on. Instead the driver will + * return ETIME status, so that calling function can issue + * diag reset operation and retry the command. + */ + if (ioc->is_driver_loading) + return -ETIME; + ssleep(1); ioc_info(ioc, "%s: waiting for operational state(count=%d)\n", __func__, ++wait_state_count); @@ -7215,7 +7307,7 @@ mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc) ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); return -EAGAIN; } - + ioc->drv_internal_flags |= MPT_DRV_INTERNAL_FIRST_PE_ISSUED; ioc->port_enable_cmds.status = MPT3_CMD_PENDING; mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); ioc->port_enable_cmds.smid = smid; @@ -7313,7 +7405,7 @@ _base_event_notification(struct MPT3SAS_ADAPTER *ioc) Mpi2EventNotificationRequest_t *mpi_request; u16 smid; int r = 0; - int i; + int i, issue_diag_reset = 0; dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); @@ -7347,10 +7439,19 @@ _base_event_notification(struct MPT3SAS_ADAPTER *ioc) if (ioc->base_cmds.status & MPT3_CMD_RESET) r = -EFAULT; else - r = -ETIME; + issue_diag_reset = 1; + } else dinitprintk(ioc, ioc_info(ioc, "%s: complete\n", __func__)); ioc->base_cmds.status = MPT3_CMD_NOT_USED; + + if (issue_diag_reset) { + if (ioc->drv_internal_flags & MPT_DRV_INTERNAL_FIRST_PE_ISSUED) + return -EFAULT; + if (mpt3sas_base_check_for_fault_and_issue_reset(ioc)) + return -EFAULT; + r = -EAGAIN; + } return r; } @@ -7714,7 +7815,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc) if (!ioc->is_driver_loading) return r; - rc = _base_check_for_fault_and_issue_reset(ioc); + rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc); if (rc || (_base_send_ioc_init(ioc))) return r; } @@ -7748,7 +7849,10 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc) return r; } - _base_static_config_pages(ioc); + rc = _base_static_config_pages(ioc); + if (r) + return r; + r = _base_event_notification(ioc); if (r) return r; @@ -7853,7 +7957,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) pci_set_drvdata(ioc->pdev, ioc->shost); r = _base_get_ioc_facts(ioc); if (r) { - rc = _base_check_for_fault_and_issue_reset(ioc); + rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc); if (rc || (_base_get_ioc_facts(ioc))) goto out_free_resources; } @@ -7925,7 +8029,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { r = _base_get_port_facts(ioc, i); if (r) { - rc = _base_check_for_fault_and_issue_reset(ioc); + rc = mpt3sas_base_check_for_fault_and_issue_reset(ioc); if (rc || (_base_get_port_facts(ioc, i))) goto out_free_resources; } @@ -8051,8 +8155,11 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) } } r = _base_make_ioc_operational(ioc); - if (r) - goto out_free_resources; + if (r == -EAGAIN) { + r = _base_make_ioc_operational(ioc); + if (r) + goto out_free_resources; + } /* * Copy current copy of IOCFacts in prev_fw_facts diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 00b823174669..c86a0a64af4c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1175,6 +1175,7 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands * @thresh_hold: Max number of reply descriptors processed * before updating Host Index + * @drv_internal_flags: Bit map internal to driver * @drv_support_bitmap: driver's supported feature bit map * @use_32bit_dma: Flag to use 32 bit consistent dma mask * @scsi_io_cb_idx: shost generated commands @@ -1370,6 +1371,7 @@ struct MPT3SAS_ADAPTER { bool msix_load_balance; u16 thresh_hold; u8 high_iops_queues; + u32 drv_internal_flags; u32 drv_support_bitmap; u32 dma_mask; bool enable_sdev_max_qd; @@ -1615,6 +1617,8 @@ struct mpt3sas_debugfs_buffer { #define MPT_DRV_SUPPORT_BITMAP_MEMMOVE 0x00000001 #define MPT_DRV_SUPPORT_BITMAP_ADDNLQUERY 0x00000002 +#define MPT_DRV_INTERNAL_FIRST_PE_ISSUED 0x00000001 + typedef u8 (*MPT_CALLBACK)(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); @@ -1709,6 +1713,9 @@ void mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc); void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, u16 device_missing_delay, u8 io_missing_delay); +int mpt3sas_base_check_for_fault_and_issue_reset( + struct MPT3SAS_ADAPTER *ioc); + int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc); void diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 55cd32908924..83a5c2172ad4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -359,8 +359,11 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t } r = mpt3sas_wait_for_ioc(ioc, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT); - if (r) + if (r) { + if (r == -ETIME) + issue_host_reset = 1; goto free_mem; + } smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx); if (!smid) { @@ -395,7 +398,6 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t MPT3_CMD_RESET) || ioc->pci_error_recovery) goto retry_config; issue_host_reset = 1; - r = -EFAULT; goto free_mem; } @@ -486,8 +488,16 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t ioc->config_cmds.status = MPT3_CMD_NOT_USED; mutex_unlock(&ioc->config_cmds.mutex); - if (issue_host_reset) - mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); + if (issue_host_reset) { + if (ioc->drv_internal_flags & MPT_DRV_INTERNAL_FIRST_PE_ISSUED) { + mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); + r = -EFAULT; + } else { + if (mpt3sas_base_check_for_fault_and_issue_reset(ioc)) + return -EFAULT; + r = -EAGAIN; + } + } return r; } -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit a0815c45c89f544861eae55d85ccee6b1b1451e8 upstream. If a firmware fault occurs while scanning the devices during IOC initialization then the driver issues the hard reset operation to recover the IOC. However, the driver is not issuing a Port enable request message as part of hard reset operation during IOC initialization. Due to this, the driver will not receive get any device discovery-related events and hence devices will not be accessible. Teach the driver to gracefully handle firmware faults while scanning for target devices during IOC initialization. Make the driver issue a port enable request message as part of hard reset operation. This permits receiving device discovery-related events from the firmware after the hard reset operation completes. Link: https://lore.kernel.org/r/20210518051625.1596742-4-suganath-prabu.subramani@... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 8 +- drivers/scsi/mpt3sas/mpt3sas_base.h | 1 + drivers/scsi/mpt3sas/mpt3sas_scsih.c | 152 ++++++++++++++++++++++++--- 3 files changed, 145 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 1c1c9e13dfc4..6907d0720910 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -7206,7 +7206,7 @@ mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, if (ioc_status != MPI2_IOCSTATUS_SUCCESS) ioc->port_enable_failed = 1; - if (ioc->is_driver_loading) { + if (ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE_ASYNC) { if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { mpt3sas_port_enable_complete(ioc); return 1; @@ -7215,6 +7215,7 @@ mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, ioc->start_scan = 0; return 1; } + ioc->port_enable_cmds.status &= ~MPT3_CMD_COMPLETE_ASYNC; } complete(&ioc->port_enable_cmds.done); return 1; @@ -7309,6 +7310,7 @@ mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc) } ioc->drv_internal_flags |= MPT_DRV_INTERNAL_FIRST_PE_ISSUED; ioc->port_enable_cmds.status = MPT3_CMD_PENDING; + ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE_ASYNC; mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); ioc->port_enable_cmds.smid = smid; memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); @@ -7857,7 +7859,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc) if (r) return r; - if (ioc->is_driver_loading) { + if (!ioc->shost_recovery) { if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier == 0x80) { @@ -8277,8 +8279,6 @@ _base_clear_outstanding_mpt_commands(struct MPT3SAS_ADAPTER *ioc) ioc->start_scan_failed = MPI2_IOCSTATUS_INTERNAL_ERROR; ioc->start_scan = 0; - ioc->port_enable_cmds.status = - MPT3_CMD_NOT_USED; } else { complete(&ioc->port_enable_cmds.done); } diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index c86a0a64af4c..0c6c3df0038d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -500,6 +500,7 @@ struct MPT3SAS_DEVICE { #define MPT3_CMD_PENDING 0x0002 /* pending */ #define MPT3_CMD_REPLY_VALID 0x0004 /* reply is valid */ #define MPT3_CMD_RESET 0x0008 /* host reset dropped the command */ +#define MPT3_CMD_COMPLETE_ASYNC 0x0010 /* tells whether cmd completes in same thread or not */ /** * struct _internal_cmd - internal commands struct diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index beebd0b48837..d67128474345 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -78,6 +78,7 @@ static void _scsih_pcie_device_remove_from_sml(struct MPT3SAS_ADAPTER *ioc, static void _scsih_pcie_check_device(struct MPT3SAS_ADAPTER *ioc, u16 handle); static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid); +static void _scsih_complete_devices_scanning(struct MPT3SAS_ADAPTER *ioc); /* global parameters */ LIST_HEAD(mpt3sas_ioc_list); @@ -3631,8 +3632,6 @@ _scsih_error_recovery_delete_devices(struct MPT3SAS_ADAPTER *ioc) { struct fw_event_work *fw_event; - if (ioc->is_driver_loading) - return; fw_event = alloc_fw_event_work(0); if (!fw_event) return; @@ -3693,6 +3692,14 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc) if ((list_empty(&ioc->fw_event_list) && !ioc->current_event) || !ioc->firmware_event_thread) return; + /* + * Set current running event as ignore, so that + * current running event will exit quickly. + * As diag reset has occurred it is of no use + * to process remaining stale event data entries. + */ + if (ioc->shost_recovery && ioc->current_event) + ioc->current_event->ignore = 1; ioc->fw_events_cleanup = 1; while ((fw_event = dequeue_next_fw_event(ioc)) || @@ -3719,6 +3726,19 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc) continue; } + /* + * Driver has to clear ioc->start_scan flag when + * it is cleaning up MPT3SAS_PORT_ENABLE_COMPLETE, + * otherwise scsi_scan_host() API waits for the + * 5 minute timer to expire. If we exit from + * scsi_scan_host() early then we can issue the + * new port enable request as part of current diag reset. + */ + if (fw_event->event == MPT3SAS_PORT_ENABLE_COMPLETE) { + ioc->port_enable_cmds.status |= MPT3_CMD_RESET; + ioc->start_scan = 0; + } + /* * Wait on the fw_event to complete. If this returns 1, then * the event was never executed, and we need a put for the @@ -10142,6 +10162,17 @@ _scsih_remove_unresponding_devices(struct MPT3SAS_ADAPTER *ioc) * owner for the reference the list had on any object we prune. */ spin_lock_irqsave(&ioc->sas_device_lock, flags); + + /* + * Clean up the sas_device_init_list list as + * driver goes for fresh scan as part of diag reset. + */ + list_for_each_entry_safe(sas_device, sas_device_next, + &ioc->sas_device_init_list, list) { + list_del_init(&sas_device->list); + sas_device_put(sas_device); + } + list_for_each_entry_safe(sas_device, sas_device_next, &ioc->sas_device_list, list) { if (!sas_device->responding) @@ -10163,6 +10194,16 @@ _scsih_remove_unresponding_devices(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "Removing unresponding devices: pcie end-devices\n"); INIT_LIST_HEAD(&head); spin_lock_irqsave(&ioc->pcie_device_lock, flags); + /* + * Clean up the pcie_device_init_list list as + * driver goes for fresh scan as part of diag reset. + */ + list_for_each_entry_safe(pcie_device, pcie_device_next, + &ioc->pcie_device_init_list, list) { + list_del_init(&pcie_device->list); + pcie_device_put(pcie_device); + } + list_for_each_entry_safe(pcie_device, pcie_device_next, &ioc->pcie_device_list, list) { if (!pcie_device->responding) @@ -10565,8 +10606,7 @@ void mpt3sas_scsih_reset_done_handler(struct MPT3SAS_ADAPTER *ioc) { dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__)); - if ((!ioc->is_driver_loading) && !(disable_discovery > 0 && - !ioc->sas_hba.num_phys)) { + if (!(disable_discovery > 0 && !ioc->sas_hba.num_phys)) { if (ioc->multipath_on_hba) { _scsih_sas_port_refresh(ioc); _scsih_update_vphys_after_reset(ioc); @@ -10621,6 +10661,18 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event) _scsih_del_dirty_vphy(ioc); _scsih_del_dirty_port_entries(ioc); _scsih_scan_for_devices_after_reset(ioc); + /* + * If diag reset has occurred during the driver load + * then driver has to complete the driver load operation + * by executing the following items: + *- Register the devices from sas_device_init_list to SML + *- clear is_driver_loading flag, + *- start the watchdog thread. + * In happy driver load path, above things are taken care of when + * driver executes scsih_scan_finished(). + */ + if (ioc->is_driver_loading) + _scsih_complete_devices_scanning(ioc); _scsih_set_nvme_max_shutdown_latency(ioc); break; case MPT3SAS_PORT_ENABLE_COMPLETE: @@ -10766,11 +10818,23 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, _scsih_check_topo_delete_events(ioc, (Mpi2EventDataSasTopologyChangeList_t *) mpi_reply->EventData); + /* + * No need to add the topology change list + * event to fw event work queue when + * diag reset is going on. Since during diag + * reset driver scan the devices by reading + * sas device page0's not by processing the + * events. + */ + if (ioc->shost_recovery) + return 1; break; case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST: _scsih_check_pcie_topo_remove_events(ioc, (Mpi26EventDataPCIeTopologyChangeList_t *) mpi_reply->EventData); + if (ioc->shost_recovery) + return 1; break; case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: _scsih_check_ir_config_unhide_events(ioc, @@ -11292,13 +11356,27 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc) if (channel == RAID_CHANNEL) { raid_device = device; + /* + * If this boot vd is already registered with SML then + * no need to register it again as part of device scanning + * after diag reset during driver load operation. + */ + if (raid_device->starget) + return; rc = scsi_add_device(ioc->shost, RAID_CHANNEL, raid_device->id, 0); if (rc) _scsih_raid_device_remove(ioc, raid_device); } else if (channel == PCIE_CHANNEL) { - spin_lock_irqsave(&ioc->pcie_device_lock, flags); pcie_device = device; + /* + * If this boot NVMe device is already registered with SML then + * no need to register it again as part of device scanning + * after diag reset during driver load operation. + */ + if (pcie_device->starget) + return; + spin_lock_irqsave(&ioc->pcie_device_lock, flags); tid = pcie_device->id; list_move_tail(&pcie_device->list, &ioc->pcie_device_list); spin_unlock_irqrestore(&ioc->pcie_device_lock, flags); @@ -11306,8 +11384,15 @@ _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc) if (rc) _scsih_pcie_device_remove(ioc, pcie_device); } else { - spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = device; + /* + * If this boot sas/sata device is already registered with SML + * then no need to register it again as part of device scanning + * after diag reset during driver load operation. + */ + if (sas_device->starget) + return; + spin_lock_irqsave(&ioc->sas_device_lock, flags); handle = sas_device->handle; sas_address_parent = sas_device->sas_address_parent; sas_address = sas_device->sas_address; @@ -11605,6 +11690,25 @@ scsih_scan_start(struct Scsi_Host *shost) ioc_info(ioc, "port enable: FAILED\n"); } +/** + * _scsih_complete_devices_scanning - add the devices to sml and + * complete ioc initialization. + * @ioc: per adapter object + * + * Return nothing. + */ +static void _scsih_complete_devices_scanning(struct MPT3SAS_ADAPTER *ioc) +{ + + if (ioc->wait_for_discovery_to_complete) { + ioc->wait_for_discovery_to_complete = 0; + _scsih_probe_devices(ioc); + } + + mpt3sas_base_start_watchdog(ioc); + ioc->is_driver_loading = 0; +} + /** * scsih_scan_finished - scsi lld callback for .scan_finished * @shost: SCSI host pointer @@ -11618,6 +11722,8 @@ static int scsih_scan_finished(struct Scsi_Host *shost, unsigned long time) { struct MPT3SAS_ADAPTER *ioc = shost_priv(shost); + u32 ioc_state; + int issue_hard_reset = 0; if (disable_discovery > 0) { ioc->is_driver_loading = 0; @@ -11632,9 +11738,30 @@ scsih_scan_finished(struct Scsi_Host *shost, unsigned long time) return 1; } - if (ioc->start_scan) + if (ioc->start_scan) { + ioc_state = mpt3sas_base_get_iocstate(ioc, 0); + if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { + mpt3sas_print_fault_code(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + issue_hard_reset = 1; + goto out; + } else if ((ioc_state & MPI2_IOC_STATE_MASK) == + MPI2_IOC_STATE_COREDUMP) { + mpt3sas_base_coredump_info(ioc, ioc_state & + MPI2_DOORBELL_DATA_MASK); + mpt3sas_base_wait_for_coredump_completion(ioc, __func__); + issue_hard_reset = 1; + goto out; + } return 0; + } + if (ioc->port_enable_cmds.status & MPT3_CMD_RESET) { + ioc_info(ioc, + "port enable: aborted due to diag reset\n"); + ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; + goto out; + } if (ioc->start_scan_failed) { ioc_info(ioc, "port enable: FAILED with (ioc_status=0x%08x)\n", ioc->start_scan_failed); @@ -11646,13 +11773,14 @@ scsih_scan_finished(struct Scsi_Host *shost, unsigned long time) ioc_info(ioc, "port enable: SUCCESS\n"); ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; + _scsih_complete_devices_scanning(ioc); - if (ioc->wait_for_discovery_to_complete) { - ioc->wait_for_discovery_to_complete = 0; - _scsih_probe_devices(ioc); +out: + if (issue_hard_reset) { + ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; + if (mpt3sas_base_hard_reset_handler(ioc, SOFT_RESET)) + ioc->is_driver_loading = 0; } - mpt3sas_base_start_watchdog(ioc); - ioc->is_driver_loading = 0; return 1; } -- 2.33.0
From: "Gustavo A. R. Silva" <gustavoars@kernel.org> Commit 84a84cc6aff4243c9f28c879b94d0dd55a310b54 upstream. In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Link: https://lore.kernel.org/r/20210528200828.GA39349@embeddedor Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 1 + drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 6907d0720910..01dde0135d75 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4438,6 +4438,7 @@ _base_display_OEMs_branding(struct MPT3SAS_ADAPTER *ioc) ioc->pdev->subsystem_device); break; } + break; default: break; } diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index d67128474345..ab295dea9552 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -12090,6 +12090,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) ioc->multipath_on_hba = 1; else ioc->multipath_on_hba = 0; + break; default: break; } -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit cf750be8e68e8c2755f0ee29784463a2da91e922 upstream. Fix the structurally dead code (UNREACHABLE) type of error reported by Coverity. Link: https://lore.kernel.org/r/20210618155506.2609112-1-suganath-prabu.subramani@... Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 01dde0135d75..152605e22b6a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -7208,6 +7208,7 @@ mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, ioc->port_enable_failed = 1; if (ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE_ASYNC) { + ioc->port_enable_cmds.status &= ~MPT3_CMD_COMPLETE_ASYNC; if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { mpt3sas_port_enable_complete(ioc); return 1; @@ -7216,7 +7217,6 @@ mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, ioc->start_scan = 0; return 1; } - ioc->port_enable_cmds.status &= ~MPT3_CMD_COMPLETE_ASYNC; } complete(&ioc->port_enable_cmds.done); return 1; -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 432bc7caef4eaacc1101ee2569bb870bdfeed7ce upstream. Enable the driver to work in non-IRQ mode, i.e. there will not be any MSI-X vectors associated with queues dedicated to polling. The IOC hardware is single submission queue and multiple reply queue. However, using the shared host tagset support it is possible to simulate multiple hardware queues. When poll_queues are enabled through the module parameter, the driver will allocate extra reply queues without an MSI-X association. All I/O completion on these queues will be done through the iopoll interface. Link: https://lore.kernel.org/r/20210727081212.2742-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 243 ++++++++++++++++++++++++--- drivers/scsi/mpt3sas/mpt3sas_base.h | 23 +++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 62 +++++-- 3 files changed, 296 insertions(+), 32 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 152605e22b6a..9918d5c7898e 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -116,6 +116,14 @@ MODULE_PARM_DESC(perf_mode, "\t\tdefault - default perf_mode is 'balanced'" ); +static int poll_queues; +module_param(poll_queues, int, 0444); +MODULE_PARM_DESC(poll_queues, "Number of queues to be use for io_uring poll mode.\n\t\t" + "This parameter is effective only if host_tagset_enable=1. &\n\t\t" + "when poll_queues are enabled then &\n\t\t" + "perf_mode is set to latency mode. &\n\t\t" + ); + enum mpt3sas_perf_mode { MPT_PERF_MODE_DEFAULT = -1, MPT_PERF_MODE_BALANCED = 0, @@ -709,6 +717,7 @@ _base_fault_reset_work(struct work_struct *work) * and this call is safe since dead ioc will never return any * command back from HW. */ + mpt3sas_base_pause_mq_polling(ioc); ioc->schedule_dead_ioc_flush_running_cmds(ioc); /* * Set remove_host flag early since kernel thread will @@ -744,6 +753,7 @@ _base_fault_reset_work(struct work_struct *work) spin_unlock_irqrestore( &ioc->ioc_reset_in_progress_lock, flags); mpt3sas_base_mask_interrupts(ioc); + mpt3sas_base_pause_mq_polling(ioc); _base_clear_outstanding_commands(ioc); } @@ -1547,6 +1557,53 @@ _base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid) return cb_idx; } +/** + * mpt3sas_base_pause_mq_polling - pause polling on the mq poll queues + * when driver is flushing out the IOs. + * @ioc: per adapter object + * + * Pause polling on the mq poll (io uring) queues when driver is flushing + * out the IOs. Otherwise we may see the race condition of completing the same + * IO from two paths. + * + * Returns nothing. + */ +void +mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc) +{ + int iopoll_q_count = + ioc->reply_queue_count - ioc->iopoll_q_start_index; + int qid; + + for (qid = 0; qid < iopoll_q_count; qid++) + atomic_set(&ioc->io_uring_poll_queues[qid].pause, 1); + + /* + * wait for current poll to complete. + */ + for (qid = 0; qid < iopoll_q_count; qid++) { + while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) + udelay(500); + } +} + +/** + * mpt3sas_base_resume_mq_polling - Resume polling on mq poll queues. + * @ioc: per adapter object + * + * Returns nothing. + */ +void +mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc) +{ + int iopoll_q_count = + ioc->reply_queue_count - ioc->iopoll_q_start_index; + int qid; + + for (qid = 0; qid < iopoll_q_count; qid++) + atomic_set(&ioc->io_uring_poll_queues[qid].pause, 0); +} + /** * mpt3sas_base_mask_interrupts - disable interrupts * @ioc: per adapter object @@ -1722,7 +1779,8 @@ _base_process_reply_queue(struct adapter_reply_queue *reply_q) MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex); } - if (!reply_q->irq_poll_scheduled) { + if (!reply_q->is_iouring_poll_q && + !reply_q->irq_poll_scheduled) { reply_q->irq_poll_scheduled = true; irq_poll_sched(&reply_q->irqpoll); } @@ -1778,6 +1836,33 @@ _base_process_reply_queue(struct adapter_reply_queue *reply_q) return completed_cmds; } +/** + * mpt3sas_blk_mq_poll - poll the blk mq poll queue + * @shost: Scsi_Host object + * @queue_num: hw ctx queue number + * + * Return number of entries that has been processed from poll queue. + */ +int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num) +{ + struct MPT3SAS_ADAPTER *ioc = + (struct MPT3SAS_ADAPTER *)shost->hostdata; + struct adapter_reply_queue *reply_q; + int num_entries = 0; + int qid = queue_num - ioc->iopoll_q_start_index; + + if (atomic_read(&ioc->io_uring_poll_queues[qid].pause) || + !atomic_add_unless(&ioc->io_uring_poll_queues[qid].busy, 1, 1)) + return 0; + + reply_q = ioc->io_uring_poll_queues[qid].reply_q; + + num_entries = _base_process_reply_queue(reply_q); + atomic_dec(&ioc->io_uring_poll_queues[qid].busy); + + return num_entries; +} + /** * _base_interrupt - MPT adapter (IOC) specific interrupt handler. * @irq: irq number (not used) @@ -1851,6 +1936,8 @@ _base_init_irqpolls(struct MPT3SAS_ADAPTER *ioc) return; list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { + if (reply_q->is_iouring_poll_q) + continue; irq_poll_init(&reply_q->irqpoll, ioc->hba_queue_depth/4, _base_irqpoll); reply_q->irq_poll_scheduled = false; @@ -1900,6 +1987,12 @@ mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc, u8 poll) /* TMs are on msix_index == 0 */ if (reply_q->msix_index == 0) continue; + + if (reply_q->is_iouring_poll_q) { + _base_process_reply_queue(reply_q); + continue; + } + synchronize_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index)); if (reply_q->irq_poll_scheduled) { /* Calling irq_poll_disable will wait for any pending @@ -2999,6 +3092,11 @@ mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc) list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { list_del(&reply_q->list); + if (reply_q->is_iouring_poll_q) { + kfree(reply_q); + continue; + } + if (ioc->smp_affinity_enable) irq_set_affinity_hint(pci_irq_vector(ioc->pdev, reply_q->msix_index), NULL); @@ -3020,7 +3118,7 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) { struct pci_dev *pdev = ioc->pdev; struct adapter_reply_queue *reply_q; - int r; + int r, qid; reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL); if (!reply_q) { @@ -3032,6 +3130,17 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) reply_q->msix_index = index; atomic_set(&reply_q->busy, 0); + + if (index >= ioc->iopoll_q_start_index) { + qid = index - ioc->iopoll_q_start_index; + snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-mq-poll%d", + ioc->driver_name, ioc->id, qid); + reply_q->is_iouring_poll_q = 1; + ioc->io_uring_poll_queues[qid].reply_q = reply_q; + goto out; + } + + if (ioc->msix_enable) snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", ioc->driver_name, ioc->id, index); @@ -3046,7 +3155,7 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) kfree(reply_q); return -EBUSY; } - +out: INIT_LIST_HEAD(&reply_q->list); list_add_tail(&reply_q->list, &ioc->reply_queue_list); return 0; @@ -3067,6 +3176,8 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) unsigned int cpu, nr_cpus, nr_msix, index = 0; struct adapter_reply_queue *reply_q; int local_numa_node; + int iopoll_q_count = ioc->reply_queue_count - + ioc->iopoll_q_start_index; if (!_base_is_controller_msix_enabled(ioc)) return; @@ -3100,7 +3211,8 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { const cpumask_t *mask; - if (reply_q->msix_index < ioc->high_iops_queues) + if (reply_q->msix_index < ioc->high_iops_queues || + reply_q->msix_index >= ioc->iopoll_q_start_index) continue; mask = pci_irq_get_affinity(ioc->pdev, @@ -3122,13 +3234,14 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) fall_back: cpu = cpumask_first(cpu_online_mask); - nr_msix -= ioc->high_iops_queues; + nr_msix -= (ioc->high_iops_queues - iopoll_q_count); index = 0; list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { unsigned int i, group = nr_cpus / nr_msix; - if (reply_q->msix_index < ioc->high_iops_queues) + if (reply_q->msix_index < ioc->high_iops_queues || + reply_q->msix_index >= ioc->iopoll_q_start_index) continue; if (cpu >= nr_cpus) @@ -3165,8 +3278,12 @@ _base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc, { u16 lnksta, speed; + /* + * Disable high iops queues if io uring poll queues are enabled. + */ if (perf_mode == MPT_PERF_MODE_IOPS || - perf_mode == MPT_PERF_MODE_LATENCY) { + perf_mode == MPT_PERF_MODE_LATENCY || + ioc->io_uring_poll_queues) { ioc->high_iops_queues = 0; return; } @@ -3203,6 +3320,7 @@ mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc) return; pci_free_irq_vectors(ioc->pdev); ioc->msix_enable = 0; + kfree(ioc->io_uring_poll_queues); } /** @@ -3216,18 +3334,24 @@ _base_alloc_irq_vectors(struct MPT3SAS_ADAPTER *ioc) int i, irq_flags = PCI_IRQ_MSIX; struct irq_affinity desc = { .pre_vectors = ioc->high_iops_queues }; struct irq_affinity *descp = &desc; + /* + * Don't allocate msix vectors for poll_queues. + * msix_vectors is always within a range of FW supported reply queue. + */ + int nr_msix_vectors = ioc->iopoll_q_start_index; + if (ioc->smp_affinity_enable) - irq_flags |= PCI_IRQ_AFFINITY; + irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES; else descp = NULL; - ioc_info(ioc, " %d %d\n", ioc->high_iops_queues, - ioc->reply_queue_count); + ioc_info(ioc, " %d %d %d\n", ioc->high_iops_queues, + ioc->reply_queue_count, nr_msix_vectors); i = pci_alloc_irq_vectors_affinity(ioc->pdev, ioc->high_iops_queues, - ioc->reply_queue_count, irq_flags, descp); + nr_msix_vectors, irq_flags, descp); return i; } @@ -3243,6 +3367,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) int r; int i, local_max_msix_vectors; u8 try_msix = 0; + int iopoll_q_count = 0; ioc->msix_load_balance = false; @@ -3258,22 +3383,16 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "MSI-X vectors supported: %d\n", ioc->msix_vector_count); pr_info("\t no of cores: %d, max_msix_vectors: %d\n", ioc->cpu_count, max_msix_vectors); - if (ioc->is_aero_ioc) - _base_check_and_enable_high_iops_queues(ioc, - ioc->msix_vector_count); + ioc->reply_queue_count = - min_t(int, ioc->cpu_count + ioc->high_iops_queues, - ioc->msix_vector_count); + min_t(int, ioc->cpu_count, ioc->msix_vector_count); if (!ioc->rdpq_array_enable && max_msix_vectors == -1) local_max_msix_vectors = (reset_devices) ? 1 : 8; else local_max_msix_vectors = max_msix_vectors; - if (local_max_msix_vectors > 0) - ioc->reply_queue_count = min_t(int, local_max_msix_vectors, - ioc->reply_queue_count); - else if (local_max_msix_vectors == 0) + if (local_max_msix_vectors == 0) goto try_ioapic; /* @@ -3294,14 +3413,77 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) if (ioc->msix_load_balance) ioc->smp_affinity_enable = 0; + if (!ioc->smp_affinity_enable || ioc->reply_queue_count <= 1) + ioc->shost->host_tagset = 0; + + /* + * Enable io uring poll queues only if host_tagset is enabled. + */ + if (ioc->shost->host_tagset) + iopoll_q_count = poll_queues; + + if (iopoll_q_count) { + ioc->io_uring_poll_queues = kcalloc(iopoll_q_count, + sizeof(struct io_uring_poll_queue), GFP_KERNEL); + if (!ioc->io_uring_poll_queues) + iopoll_q_count = 0; + } + + if (ioc->is_aero_ioc) + _base_check_and_enable_high_iops_queues(ioc, + ioc->msix_vector_count); + + /* + * Add high iops queues count to reply queue count if high iops queues + * are enabled. + */ + ioc->reply_queue_count = min_t(int, + ioc->reply_queue_count + ioc->high_iops_queues, + ioc->msix_vector_count); + + /* + * Adjust the reply queue count incase reply queue count + * exceeds the user provided MSIx vectors count. + */ + if (local_max_msix_vectors > 0) + ioc->reply_queue_count = min_t(int, local_max_msix_vectors, + ioc->reply_queue_count); + /* + * Add io uring poll queues count to reply queues count + * if io uring is enabled in driver. + */ + if (iopoll_q_count) { + if (ioc->reply_queue_count < (iopoll_q_count + MPT3_MIN_IRQS)) + iopoll_q_count = 0; + ioc->reply_queue_count = min_t(int, + ioc->reply_queue_count + iopoll_q_count, + ioc->msix_vector_count); + } + + /* + * Starting index of io uring poll queues in reply queue list. + */ + ioc->iopoll_q_start_index = + ioc->reply_queue_count - iopoll_q_count; + r = _base_alloc_irq_vectors(ioc); if (r < 0) { ioc_info(ioc, "pci_alloc_irq_vectors failed (r=%d) !!!\n", r); goto try_ioapic; } + /* + * Adjust the reply queue count if the allocated + * MSIx vectors is less then the requested number + * of MSIx vectors. + */ + if (r < ioc->iopoll_q_start_index) { + ioc->reply_queue_count = r + iopoll_q_count; + ioc->iopoll_q_start_index = + ioc->reply_queue_count - iopoll_q_count; + } + ioc->msix_enable = 1; - ioc->reply_queue_count = r; for (i = 0; i < ioc->reply_queue_count; i++) { r = _base_request_irq(ioc, i); if (r) { @@ -3321,6 +3503,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) ioc->high_iops_queues = 0; ioc_info(ioc, "High IOPs queues : disabled\n"); ioc->reply_queue_count = 1; + ioc->iopoll_q_start_index = ioc->reply_queue_count - 0; r = pci_alloc_irq_vectors(ioc->pdev, 1, 1, PCI_IRQ_LEGACY); if (r < 0) { dfailprintk(ioc, @@ -3417,6 +3600,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) u64 pio_chip = 0; phys_addr_t chip_phys = 0; struct adapter_reply_queue *reply_q; + int iopoll_q_count = 0; dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); @@ -3490,6 +3674,12 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) if (r) goto out_fail; + iopoll_q_count = ioc->reply_queue_count - ioc->iopoll_q_start_index; + for (i = 0; i < iopoll_q_count; i++) { + atomic_set(&ioc->io_uring_poll_queues[i].busy, 0); + atomic_set(&ioc->io_uring_poll_queues[i].pause, 0); + } + if (!ioc->is_driver_loading) _base_init_irqpolls(ioc); /* Use the Combined reply queue feature only for SAS3 C0 & higher @@ -3531,11 +3721,18 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) * 4))); } - list_for_each_entry(reply_q, &ioc->reply_queue_list, list) + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { + if (reply_q->msix_index >= ioc->iopoll_q_start_index) { + pr_info("%s: enabled: index: %d\n", + reply_q->name, reply_q->msix_index); + continue; + } + pr_info("%s: %s enabled: IRQ %d\n", reply_q->name, ioc->msix_enable ? "PCI-MSI-X" : "IO-APIC", pci_irq_vector(ioc->pdev, reply_q->msix_index)); + } ioc_info(ioc, "iomem(%pap), mapped(0x%p), size(%d)\n", &chip_phys, ioc->chip, memap_sz); @@ -8472,6 +8669,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, _base_pre_reset_handler(ioc); mpt3sas_wait_for_commands_to_complete(ioc); mpt3sas_base_mask_interrupts(ioc); + mpt3sas_base_pause_mq_polling(ioc); r = mpt3sas_base_make_ioc_ready(ioc, type); if (r) goto out; @@ -8513,6 +8711,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); ioc->ioc_reset_count++; mutex_unlock(&ioc->reset_in_progress_mutex); + mpt3sas_base_resume_mq_polling(ioc); out_unlocked: if ((r == 0) && is_trigger) { diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 0c6c3df0038d..c15c567d55e2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -354,6 +354,7 @@ struct mpt3sas_nvme_cmd { #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G3 12 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_COUNT_G35 16 #define MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET (0x10) +#define MPT3_MIN_IRQS 1 /* OEM Identifiers */ #define MFG10_OEM_ID_INVALID (0x00000000) @@ -936,6 +937,8 @@ struct _event_ack_list { * @os_irq: irq number * @irqpoll: irq_poll object * @irq_poll_scheduled: Tells whether irq poll is scheduled or not + * @is_iouring_poll_q: Tells whether reply queues is assigned + * to io uring poll queues or not * @list: this list */ struct adapter_reply_queue { @@ -949,9 +952,22 @@ struct adapter_reply_queue { struct irq_poll irqpoll; bool irq_poll_scheduled; bool irq_line_enable; + bool is_iouring_poll_q; struct list_head list; }; +/** + * struct io_uring_poll_queue - the io uring poll queue structure + * @busy: Tells whether io uring poll queue is busy or not + * @pause: Tells whether IOs are paused on io uring poll queue or not + * @reply_q: reply queue mapped for io uring poll queue + */ +struct io_uring_poll_queue { + atomic_t busy; + atomic_t pause; + struct adapter_reply_queue *reply_q; +}; + typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); /* SAS3.0 support */ @@ -1176,6 +1192,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands * @thresh_hold: Max number of reply descriptors processed * before updating Host Index + * @iopoll_q_start_index: starting index of io uring poll queues + * in reply queue list * @drv_internal_flags: Bit map internal to driver * @drv_support_bitmap: driver's supported feature bit map * @use_32bit_dma: Flag to use 32 bit consistent dma mask @@ -1372,11 +1390,13 @@ struct MPT3SAS_ADAPTER { bool msix_load_balance; u16 thresh_hold; u8 high_iops_queues; + u8 iopoll_q_start_index; u32 drv_internal_flags; u32 drv_support_bitmap; u32 dma_mask; bool enable_sdev_max_qd; bool use_32bit_dma; + struct io_uring_poll_queue *io_uring_poll_queues; /* internal commands, callback index */ u8 scsi_io_cb_idx; @@ -1734,6 +1754,9 @@ int mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type); void mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc); void mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc); +int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num); +void mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc); +void mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc); /* scsih shared API */ struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index ab295dea9552..b8042b915e53 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -11184,8 +11184,10 @@ static void scsih_remove(struct pci_dev *pdev) ioc->remove_host = 1; - if (!pci_device_is_present(pdev)) + if (!pci_device_is_present(pdev)) { + mpt3sas_base_pause_mq_polling(ioc); _scsih_flush_running_cmds(ioc); + } _scsih_fw_event_cleanup_queue(ioc); @@ -11280,8 +11282,10 @@ scsih_shutdown(struct pci_dev *pdev) ioc->remove_host = 1; - if (!pci_device_is_present(pdev)) + if (!pci_device_is_present(pdev)) { + mpt3sas_base_pause_mq_polling(ioc); _scsih_flush_running_cmds(ioc); + } _scsih_fw_event_cleanup_queue(ioc); @@ -11792,12 +11796,41 @@ static int scsih_map_queues(struct Scsi_Host *shost) { struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)shost->hostdata; + struct blk_mq_queue_map *map; + int i, qoff, offset; + int nr_msix_vectors = ioc->iopoll_q_start_index; + int iopoll_q_count = ioc->reply_queue_count - nr_msix_vectors; - if (ioc->shost->nr_hw_queues == 1) + if (shost->nr_hw_queues == 1) return 0; - return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT], - ioc->pdev, ioc->high_iops_queues); + for (i = 0, qoff = 0; i < shost->nr_maps; i++) { + map = &shost->tag_set.map[i]; + map->nr_queues = 0; + offset = 0; + if (i == HCTX_TYPE_DEFAULT) { + map->nr_queues = + nr_msix_vectors - ioc->high_iops_queues; + offset = ioc->high_iops_queues; + } else if (i == HCTX_TYPE_POLL) + map->nr_queues = iopoll_q_count; + + if (!map->nr_queues) + BUG_ON(i == HCTX_TYPE_DEFAULT); + + /* + * The poll queue(s) doesn't have an IRQ (and hence IRQ + * affinity), so use the regular blk-mq cpu mapping + */ + map->queue_offset = qoff; + if (i != HCTX_TYPE_POLL) + blk_mq_pci_map_queues(map, ioc->pdev, offset); + else + blk_mq_map_queues(map); + + qoff += map->nr_queues; + } + return 0; } /* shost template for SAS 2.0 HBA devices */ @@ -11868,6 +11901,7 @@ static struct scsi_host_template mpt3sas_driver_template = { .track_queue_depth = 1, .cmd_size = sizeof(struct scsiio_tracker), .map_queues = scsih_map_queues, + .mq_poll = mpt3sas_blk_mq_poll, }; /* raid transport support for SAS 3.0 HBA devices */ @@ -11964,6 +11998,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) struct Scsi_Host *shost = NULL; int rv; u16 hba_mpi_version; + int iopoll_q_count = 0; /* Determine in which MPI version class this pci device belongs */ hba_mpi_version = _scsih_determine_hba_mpi_version(pdev); @@ -12211,6 +12246,11 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto out_thread_fail; } + shost->host_tagset = 0; + + if (ioc->is_gen35_ioc && host_tagset_enable) + shost->host_tagset = 1; + ioc->is_driver_loading = 1; if ((mpt3sas_base_attach(ioc))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -12233,16 +12273,17 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) } else ioc->hide_drives = 0; - shost->host_tagset = 0; shost->nr_hw_queues = 1; - if (ioc->is_gen35_ioc && ioc->reply_queue_count > 1 && - host_tagset_enable && ioc->smp_affinity_enable) { - - shost->host_tagset = 1; + if (shost->host_tagset) { shost->nr_hw_queues = ioc->reply_queue_count - ioc->high_iops_queues; + iopoll_q_count = + ioc->reply_queue_count - ioc->iopoll_q_start_index; + + shost->nr_maps = iopoll_q_count ? 3 : 1; + dev_info(&ioc->pdev->dev, "Max SCSIIO MPT commands: %d shared with nr_hw_queues = %d\n", shost->can_queue, shost->nr_hw_queues); @@ -12366,6 +12407,7 @@ scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) /* Permanent error, prepare for device removal */ ioc->pci_error_recovery = 1; mpt3sas_base_stop_watchdog(ioc); + mpt3sas_base_pause_mq_polling(ioc); _scsih_flush_running_cmds(ioc); return PCI_ERS_RESULT_DISCONNECT; } -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit 44f88ef3c9f1edf4f8229508649965d85bc6f186 upstream. Bump driver version to 38.100.00.00. Link: https://lore.kernel.org/r/20210803065134.19090-1-sreekanth.reddy@broadcom.co... Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index c15c567d55e2..5569a4c93a08 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -77,9 +77,9 @@ #define MPT3SAS_DRIVER_NAME "mpt3sas" #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "37.101.00.00" -#define MPT3SAS_MAJOR_VERSION 37 -#define MPT3SAS_MINOR_VERSION 101 +#define MPT3SAS_DRIVER_VERSION "38.100.00.00" +#define MPT3SAS_MAJOR_VERSION 38 +#define MPT3SAS_MINOR_VERSION 100 #define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit 787f2448c23603d658d955402b166e1dde0dc1e5 upstream. Currently, the mpt3sas driver sets the default queue depth based on the physical interface of the attached device: - SAS : 254 - SATA: 32 - NVMe: 128 The IOC firmware provides a recommended queue depth for each device through SAS IO Unit Page1 for SAS/SATA and PCIe IO Unit Page 1 for NVMe devices. If the host sets the queue depth greater than the firmware recommended value, then the IOC places the I/Os above the recommended queue depth in an internal pending queue. This consumes outstanding host-credit/resources, thereby leading to potential starvation of other devices. To avoid this, use the device depth recommended by the IOC firmware. Link: https://lore.kernel.org/r/20210809072639.21228-2-suganath-prabu.subramani@br... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 70 +++++++++++++++++++++++++++ drivers/scsi/mpt3sas/mpt3sas_base.h | 8 +++ drivers/scsi/mpt3sas/mpt3sas_config.c | 37 ++++++++++++++ drivers/scsi/mpt3sas/mpt3sas_ctl.c | 5 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 51 +++++++++++++++++-- 5 files changed, 165 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 9918d5c7898e..a5ec337fcdb4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5366,6 +5366,73 @@ _base_update_diag_trigger_pages(struct MPT3SAS_ADAPTER *ioc) &ioc->diag_trigger_mpi, 1); } +/** + * _base_assign_fw_reported_qd - Get FW reported QD for SAS/SATA devices. + * - On failure set default QD values. + * @ioc : per adapter object + * + * Returns 0 for success, non-zero for failure. + * + */ +static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc) +{ + Mpi2ConfigReply_t mpi_reply; + Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi26PCIeIOUnitPage1_t pcie_iounit_pg1; + int sz; + int rc = 0; + + ioc->max_wideport_qd = MPT3SAS_SAS_QUEUE_DEPTH; + ioc->max_narrowport_qd = MPT3SAS_SAS_QUEUE_DEPTH; + ioc->max_sata_qd = MPT3SAS_SATA_QUEUE_DEPTH; + ioc->max_nvme_qd = MPT3SAS_NVME_QUEUE_DEPTH; + if (!ioc->is_gen35_ioc) + goto out; + /* sas iounit page 1 */ + sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData); + sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_iounit_pg1) { + pr_err("%s: failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return rc; + } + rc = mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, + sas_iounit_pg1, sz); + if (rc) { + pr_err("%s: failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc->max_wideport_qd = + (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? + le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth) : + MPT3SAS_SAS_QUEUE_DEPTH; + ioc->max_narrowport_qd = + (le16_to_cpu(sas_iounit_pg1->SASNarrowMaxQueueDepth)) ? + le16_to_cpu(sas_iounit_pg1->SASNarrowMaxQueueDepth) : + MPT3SAS_SAS_QUEUE_DEPTH; + ioc->max_sata_qd = (sas_iounit_pg1->SATAMaxQDepth) ? + sas_iounit_pg1->SATAMaxQDepth : MPT3SAS_SATA_QUEUE_DEPTH; + /* pcie iounit page 1 */ + rc = mpt3sas_config_get_pcie_iounit_pg1(ioc, &mpi_reply, + &pcie_iounit_pg1, sizeof(Mpi26PCIeIOUnitPage1_t)); + if (rc) { + pr_err("%s: failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + ioc->max_nvme_qd = (le16_to_cpu(pcie_iounit_pg1.NVMeMaxQueueDepth)) ? + (le16_to_cpu(pcie_iounit_pg1.NVMeMaxQueueDepth)) : + MPT3SAS_NVME_QUEUE_DEPTH; +out: + dinitprintk(ioc, pr_err( + "MaxWidePortQD: 0x%x MaxNarrowPortQD: 0x%x MaxSataQD: 0x%x MaxNvmeQD: 0x%x\n", + ioc->max_wideport_qd, ioc->max_narrowport_qd, + ioc->max_sata_qd, ioc->max_nvme_qd)); + kfree(sas_iounit_pg1); + return rc; +} + /** * _base_static_config_pages - static start of day config pages * @ioc: per adapter object @@ -5435,6 +5502,9 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) ioc_warn(ioc, "TimeSync Interval in Manuf page-11 is not enabled. Periodic Time-Sync will be disabled\n"); } + rc = _base_assign_fw_reported_qd(ioc); + if (rc) + return rc; rc = mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); if (rc) return rc; diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 5569a4c93a08..99beb149d3cf 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -576,6 +576,7 @@ struct _sas_device { u8 is_chassis_slot_valid; u8 connector_name[5]; struct kref refcount; + u8 port_type; struct hba_port *port; struct sas_rphy *rphy; }; @@ -1443,6 +1444,10 @@ struct MPT3SAS_ADAPTER { u8 tm_custom_handling; u8 nvme_abort_timeout; u16 max_shutdown_latency; + u16 max_wideport_qd; + u16 max_narrowport_qd; + u16 max_nvme_qd; + u8 max_sata_qd; /* static config pages */ struct mpt3sas_facts facts; @@ -1852,6 +1857,9 @@ int mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc, int mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page, u32 form, u32 handle); +int mpt3sas_config_get_pcie_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeIOUnitPage1_t *config_page, + u16 sz); int mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz); diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 83a5c2172ad4..0563078227de 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -1168,6 +1168,43 @@ mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc, return r; } +/** + * mpt3sas_config_get_pcie_iounit_pg1 - obtain pcie iounit page 1 + * @ioc: per adapter object + * @mpi_reply: reply mf payload returned from firmware + * @config_page: contents of the config page + * @sz: size of buffer passed in config_page + * Context: sleep. + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt3sas_config_get_pcie_iounit_pg1(struct MPT3SAS_ADAPTER *ioc, + Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeIOUnitPage1_t *config_page, + u16 sz) +{ + Mpi2ConfigRequest_t mpi_request; + int r; + + memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); + mpi_request.Function = MPI2_FUNCTION_CONFIG; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; + mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; + mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT; + mpi_request.Header.PageVersion = MPI26_PCIEIOUNITPAGE1_PAGEVERSION; + mpi_request.Header.PageNumber = 1; + ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE); + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0); + if (r) + goto out; + mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; + r = _config_request(ioc, &mpi_request, mpi_reply, + MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz); +out: + return r; +} + /** * mpt3sas_config_get_pcie_device_pg2 - obtain pcie device page 2 * @ioc: per adapter object diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index b66140e4c370..db95cda1fad4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -3820,9 +3820,10 @@ enable_sdev_max_qd_store(struct device *cdev, } } else if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) - qdepth = MPT3SAS_NVME_QUEUE_DEPTH; + qdepth = ioc->max_nvme_qd; else - qdepth = MPT3SAS_SAS_QUEUE_DEPTH; + qdepth = (sas_target_priv_data->sas_dev->port_type > 1) ? + ioc->max_wideport_qd : ioc->max_narrowport_qd; mpt3sas_scsih_change_queue_depth(sdev, qdepth); } diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index b8042b915e53..60d41d6be0ab 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -1803,7 +1803,7 @@ scsih_change_queue_depth(struct scsi_device *sdev, int qdepth) * limit max device queue for SATA to 32 if enable_sdev_max_qd * is disabled. */ - if (ioc->enable_sdev_max_qd) + if (ioc->enable_sdev_max_qd || ioc->is_gen35_ioc) goto not_sata; sas_device_priv_data = sdev->hostdata; @@ -2657,7 +2657,7 @@ scsih_slave_configure(struct scsi_device *sdev) return 1; } - qdepth = MPT3SAS_NVME_QUEUE_DEPTH; + qdepth = ioc->max_nvme_qd; ds = "NVMe"; sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), wwid(0x%016llx), port(%d)\n", @@ -2709,7 +2709,8 @@ scsih_slave_configure(struct scsi_device *sdev) sas_device->volume_handle = volume_handle; sas_device->volume_wwid = volume_wwid; if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { - qdepth = MPT3SAS_SAS_QUEUE_DEPTH; + qdepth = (sas_device->port_type > 1) ? + ioc->max_wideport_qd : ioc->max_narrowport_qd; ssp_target = 1; if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SEP) { @@ -2721,7 +2722,7 @@ scsih_slave_configure(struct scsi_device *sdev) } else ds = "SSP"; } else { - qdepth = MPT3SAS_SATA_QUEUE_DEPTH; + qdepth = ioc->max_sata_qd; if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) ds = "STP"; else if (sas_device->device_info & @@ -7377,6 +7378,10 @@ _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num, /* get device name */ sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName); + sas_device->port_type = sas_device_pg0.MaxPortConnections; + ioc_info(ioc, + "handle(0x%0x) sas_address(0x%016llx) port_type(0x%0x)\n", + handle, sas_device->sas_address, sas_device->port_type); if (ioc->wait_for_discovery_to_complete) _scsih_sas_device_init_add(ioc, sas_device); @@ -9609,6 +9614,42 @@ _scsih_prep_device_scan(struct MPT3SAS_ADAPTER *ioc) } } +/** + * _scsih_update_device_qdepth - Update QD during Reset. + * @ioc: per adapter object + * + */ +static void +_scsih_update_device_qdepth(struct MPT3SAS_ADAPTER *ioc) +{ + struct MPT3SAS_DEVICE *sas_device_priv_data; + struct MPT3SAS_TARGET *sas_target_priv_data; + struct _sas_device *sas_device; + struct scsi_device *sdev; + u16 qdepth; + + ioc_info(ioc, "Update devices with firmware reported queue depth\n"); + shost_for_each_device(sdev, ioc->shost) { + sas_device_priv_data = sdev->hostdata; + if (sas_device_priv_data && sas_device_priv_data->sas_target) { + sas_target_priv_data = sas_device_priv_data->sas_target; + sas_device = sas_device_priv_data->sas_target->sas_dev; + if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_PCIE_DEVICE) + qdepth = ioc->max_nvme_qd; + else if (sas_device && + sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) + qdepth = (sas_device->port_type > 1) ? + ioc->max_wideport_qd : ioc->max_narrowport_qd; + else if (sas_device && + sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) + qdepth = ioc->max_sata_qd; + else + continue; + mpt3sas_scsih_change_queue_depth(sdev, qdepth); + } + } +} + /** * _scsih_mark_responding_sas_device - mark a sas_devices as responding * @ioc: per adapter object @@ -10660,6 +10701,8 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event) _scsih_remove_unresponding_devices(ioc); _scsih_del_dirty_vphy(ioc); _scsih_del_dirty_port_entries(ioc); + if (ioc->is_gen35_ioc) + _scsih_update_device_qdepth(ioc); _scsih_scan_for_devices_after_reset(ioc); /* * If diag reset has occurred during the driver load -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Commit cdc1767698a2ab5334e788cf4303b83490858391 upstream. Update driver version to 39.100.00.00. Link: https://lore.kernel.org/r/20210809072639.21228-3-suganath-prabu.subramani@br... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 99beb149d3cf..4c0340f568aa 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -77,8 +77,8 @@ #define MPT3SAS_DRIVER_NAME "mpt3sas" #define MPT3SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>" #define MPT3SAS_DESCRIPTION "LSI MPT Fusion SAS 3.0 Device Driver" -#define MPT3SAS_DRIVER_VERSION "38.100.00.00" -#define MPT3SAS_MAJOR_VERSION 38 +#define MPT3SAS_DRIVER_VERSION "39.100.00.00" +#define MPT3SAS_MAJOR_VERSION 39 #define MPT3SAS_MINOR_VERSION 100 #define MPT3SAS_BUILD_VERSION 0 #define MPT3SAS_RELEASE_VERSION 00 -- 2.33.0
From: Damien Le Moal <damien.lemoal@wdc.com> Commit 4758fd91d5a07d46be1101d6d47b289ed5d904d0 upstream. Similarly to AHCI, introduce the device sysfs attribute sas_ncq_prio_supported to advertise if a SATA device supports the NCQ priority feature. Without this new attribute, the user can only discover if a SATA device supports NCQ priority by trying to enable the feature use with the sas_ncq_prio_enable sysfs device attribute, which fails when the device does not support high prioity commands. Link: https://lore.kernel.org/r/20210807041859.579409-11-damien.lemoal@wdc.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index db95cda1fad4..770b241d7bb2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -3919,6 +3919,24 @@ sas_device_handle_show(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_RO(sas_device_handle); +/** + * sas_ncq_prio_supported_show - Indicate if device supports NCQ priority + * @dev: pointer to embedded device + * @attr: sas_ncq_prio_supported attribute descriptor + * @buf: the buffer returned + * + * A sysfs 'read-only' sdev attribute, only works with SATA + */ +static ssize_t +sas_ncq_prio_supported_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + + return sysfs_emit(buf, "%d\n", scsih_ncq_prio_supp(sdev)); +} +static DEVICE_ATTR_RO(sas_ncq_prio_supported); + /** * sas_ncq_prio_enable_show - send prioritized io commands to device * @dev: pointer to embedded device @@ -3961,6 +3979,7 @@ static DEVICE_ATTR_RW(sas_ncq_prio_enable); struct device_attribute *mpt3sas_dev_attrs[] = { &dev_attr_sas_address, &dev_attr_sas_device_handle, + &dev_attr_sas_ncq_prio_supported, &dev_attr_sas_ncq_prio_enable, NULL, }; -- 2.33.0
From: Colin Ian King <colin.king@canonical.com> Commit 40d32727931cee82cdc5aaca25ce725d1f3ac864 upstream. Currently the call to _base_static_config_pages() is assigning the error return to variable 'rc' but checking the error return in error 'r'. Fix this by assigning the error return to variable 'r' instead of 'rc'. Link: https://lore.kernel.org/r/20210804134940.114011-1-colin.king@canonical.com Fixes: 19a622c39a9d ("scsi: mpt3sas: Handle firmware faults during first half of IOC init") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value") Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index a5ec337fcdb4..0d35a8b0b463 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -8119,7 +8119,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc) return r; } - rc = _base_static_config_pages(ioc); + r = _base_static_config_pages(ioc); if (r) return r; -- 2.33.0
From: "Martin K. Petersen" <martin.petersen@oracle.com> Commit b3e2c72af1d553a646c86bbb4c0be278686a295a upstream. Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags. Link: https://lore.kernel.org/r/20210817025014.12085-2-martin.petersen@oracle.com Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 43 +++++++++------------------- 1 file changed, 13 insertions(+), 30 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 60d41d6be0ab..c87ddce8e703 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -5048,48 +5048,31 @@ _scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, Mpi25SCSIIORequest_t *mpi_request) { u16 eedp_flags; - unsigned char prot_op = scsi_get_prot_op(scmd); - unsigned char prot_type = scsi_get_prot_type(scmd); Mpi25SCSIIORequest_t *mpi_request_3v = (Mpi25SCSIIORequest_t *)mpi_request; - if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL) - return; - - if (prot_op == SCSI_PROT_READ_STRIP) + switch (scsi_get_prot_op(scmd)) { + case SCSI_PROT_READ_STRIP: eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP; - else if (prot_op == SCSI_PROT_WRITE_INSERT) + break; + case SCSI_PROT_WRITE_INSERT: eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP; - else + break; + default: return; + } - switch (prot_type) { - case SCSI_PROT_DIF_TYPE1: - case SCSI_PROT_DIF_TYPE2: + if (scmd->prot_flags & SCSI_PROT_GUARD_CHECK) + eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; - /* - * enable ref/guard checking - * auto increment ref tag - */ + if (scmd->prot_flags & SCSI_PROT_REF_CHECK) { eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG | - MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG | - MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; + MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG; mpi_request->CDB.EEDP32.PrimaryReferenceTag = - cpu_to_be32(t10_pi_ref_tag(scmd->request)); - break; - - case SCSI_PROT_DIF_TYPE3: - - /* - * enable guard checking - */ - eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; - - break; + cpu_to_be32(t10_pi_ref_tag(scmd->request)); } - mpi_request_3v->EEDPBlockSize = - cpu_to_le16(scmd->device->sector_size); + mpi_request_3v->EEDPBlockSize = cpu_to_le16(scsi_prot_interval(scmd)); if (ioc->is_gen35_ioc) eedp_flags |= MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE; -- 2.33.0
From: Kashyap Desai <kashyap.desai@broadcom.com> Commit af1830956dc3dca0c87b2d679f7c91a8fe0331e1 upstream. Currently IOPOLL support is only available in block layer. This patch adds mq_poll support to the SCSI layer. Link: https://lore.kernel.org/r/20210215074048.19424-2-kashyap.desai@broadcom.com Cc: sumit.saxena@broadcom.com Cc: chandrakanth.patil@broadcom.com Cc: linux-block@vger.kernel.org Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/scsi_lib.c | 16 ++++++++++++++++ include/scsi/scsi_cmnd.h | 1 + include/scsi/scsi_host.h | 11 +++++++++++ 3 files changed, 28 insertions(+) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d6e4b137e3f6..46bf2e080f09 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1782,6 +1782,19 @@ static void scsi_mq_exit_request(struct blk_mq_tag_set *set, struct request *rq, cmd->sense_buffer); } + +static int scsi_mq_poll(struct blk_mq_hw_ctx *hctx) +{ + struct request_queue *q = hctx->queue; + struct scsi_device *sdev = q->queuedata; + struct Scsi_Host *shost = sdev->host; + + if (shost->hostt->mq_poll) + return shost->hostt->mq_poll(shost, hctx->queue_num); + + return 0; +} + static int scsi_map_queues(struct blk_mq_tag_set *set) { struct Scsi_Host *shost = container_of(set, struct Scsi_Host, tag_set); @@ -1849,6 +1862,7 @@ static const struct blk_mq_ops scsi_mq_ops_no_commit = { .cleanup_rq = scsi_cleanup_rq, .busy = scsi_mq_lld_busy, .map_queues = scsi_map_queues, + .poll = scsi_mq_poll, }; @@ -1877,6 +1891,7 @@ static const struct blk_mq_ops scsi_mq_ops = { .cleanup_rq = scsi_cleanup_rq, .busy = scsi_mq_lld_busy, .map_queues = scsi_map_queues, + .poll = scsi_mq_poll, }; struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev) @@ -1909,6 +1924,7 @@ int scsi_mq_setup_tags(struct Scsi_Host *shost) else tag_set->ops = &scsi_mq_ops_no_commit; tag_set->nr_hw_queues = shost->nr_hw_queues ? : 1; + tag_set->nr_maps = shost->nr_maps ? : 1; tag_set->queue_depth = shost->can_queue; tag_set->cmd_size = cmd_size; tag_set->numa_node = NUMA_NO_NODE; diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index d4dbbd3e58dd..40420c0b6986 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -11,6 +11,7 @@ #include <linux/timer.h> #include <linux/scatterlist.h> #include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> #include <scsi/scsi_request.h> struct Scsi_Host; diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 19f595b6a5ca..8eae83296570 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -271,6 +271,16 @@ struct scsi_host_template { */ int (* map_queues)(struct Scsi_Host *shost); + /* + * SCSI interface of blk_poll - poll for IO completions. + * Only applicable if SCSI LLD exposes multiple h/w queues. + * + * Return value: Number of completed entries found. + * + * Status: OPTIONAL + */ + int (* mq_poll)(struct Scsi_Host *shost, unsigned int queue_num); + /* * Check if scatterlists need to be padded for DMA draining. * @@ -616,6 +626,7 @@ struct Scsi_Host { * the total queue depth is can_queue. */ unsigned nr_hw_queues; + unsigned nr_maps; unsigned active_mode:2; unsigned unchecked_isa_dma:1; -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Commit e4953a93104c1fb1ef7989541f9867cc276467f9 upstream. Call cpu_relax() while waiting for the current blk-mq polling instance to complete. Link: https://lore.kernel.org/r/20210901152542.27866-1-sreekanth.reddy@broadcom.co... Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 0d35a8b0b463..8b6757d011a2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -1582,8 +1582,10 @@ mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc) * wait for current poll to complete. */ for (qid = 0; qid < iopoll_q_count; qid++) { - while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) + while (atomic_read(&ioc->io_uring_poll_queues[qid].busy)) { + cpu_relax(); udelay(500); + } } } -- 2.33.0
From: Colin Ian King <colin.king@canonical.com> Commit 04c260bdaeede8c703bddc21099e4da96f2909e2 upstream. There are a couple of statements where the indentation is not correct, clean these up. Remove a redundant break statement. Link: https://lore.kernel.org/r/20210902224215.57286-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 770b241d7bb2..1b79f01f03a4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -2178,7 +2178,7 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type, mpt3sas_check_cmd_timeout(ioc, ioc->ctl_cmds.status, mpi_request, sizeof(Mpi2DiagReleaseRequest_t)/4, reset_needed); - *issue_reset = reset_needed; + *issue_reset = reset_needed; rc = -EFAULT; goto out; } diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index c87ddce8e703..07abc24b61fd 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -10755,8 +10755,7 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event) case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST: _scsih_pcie_topology_change_event(ioc, fw_event); ioc->current_event = NULL; - return; - break; + return; } out: fw_event_work_put(fw_event); -- 2.33.0
From: "Martin K. Petersen" <martin.petersen@oracle.com> Commit 61a9f252c1c026f84129a7bfa476e880b75e80eb upstream. Testing revealed a problem with how the reference tag was handled for a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when the controller is asked to generate the protection information (i.e. not DIX). And as a result the initial reference tag would not be set in the WRITE_INSERT case. Separate handling of the REF_CHECK and REF_INCREMENT flags to align with both the DIX spec and the MPI implementation. Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com Fixes: b3e2c72af1d5 ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 07abc24b61fd..6056460389c5 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -5065,9 +5065,12 @@ _scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, if (scmd->prot_flags & SCSI_PROT_GUARD_CHECK) eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; - if (scmd->prot_flags & SCSI_PROT_REF_CHECK) { - eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG | - MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG; + if (scmd->prot_flags & SCSI_PROT_REF_CHECK) + eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG; + + if (scmd->prot_flags & SCSI_PROT_REF_INCREMENT) { + eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG; + mpi_request->CDB.EEDP32.PrimaryReferenceTag = cpu_to_be32(t10_pi_ref_tag(scmd->request)); } -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> [ Upstream commit 91202a01a2fb2b78da3d03811b6d3d973ae426aa ] While determining the SAS address of a drive, the driver checks whether the handle number is less than the HBA phy count or not. If the handle number is less than the HBA phy count then driver assumes that this handle belongs to HBA and hence it assigns the HBA SAS address. During IOC firmware downgrade operation, if the number of HBA phys is reduced and the OS drive's device handle drops below the phy count while determining the drive's SAS address, the driver ends up using the HBA's SAS address. This leads to a mismatch of drive's SAS address and hence the driver unregisters the OS drive and the system goes into read-only mode. Update the IOC's num_phys to the HBA phy count provided by actual loaded firmware. Link: https://lore.kernel.org/r/20211117105058.3505-1-sreekanth.reddy@broadcom.com Fixes: a5e99fda0172 ("scsi: mpt3sas: Update hba_port objects after host reset") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.h | 4 ++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 57 +++++++++++++++++++++++++++- 2 files changed, 60 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 4c0340f568aa..ae582bf1fb92 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -142,6 +142,8 @@ #define MPT_MAX_CALLBACKS 32 +#define MPT_MAX_HBA_NUM_PHYS 32 + #define INTERNAL_CMDS_COUNT 10 /* reserved cmds */ /* reserved for issuing internally framed scsi io cmds */ #define INTERNAL_SCSIIO_CMDS_COUNT 3 @@ -798,6 +800,7 @@ struct _sas_phy { * @enclosure_handle: handle for this a member of an enclosure * @device_info: bitwise defining capabilities of this sas_host/expander * @responding: used in _scsih_expander_device_mark_responding + * @nr_phys_allocated: Allocated memory for this many count phys * @phy: a list of phys that make up this sas_host/expander * @sas_port_list: list of ports attached to this sas_host/expander * @port: hba port entry containing node's port number info @@ -813,6 +816,7 @@ struct _sas_node { u16 enclosure_handle; u64 enclosure_logical_id; u8 responding; + u8 nr_phys_allocated; struct hba_port *port; struct _sas_phy *phy; struct list_head sas_port_list; diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 6056460389c5..4eef52d559c2 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -6412,11 +6412,26 @@ _scsih_sas_port_refresh(struct MPT3SAS_ADAPTER *ioc) int i, j, count = 0, lcount = 0; int ret; u64 sas_addr; + u8 num_phys; drsprintk(ioc, ioc_info(ioc, "updating ports for sas_host(0x%016llx)\n", (unsigned long long)ioc->sas_hba.sas_address)); + mpt3sas_config_get_number_hba_phys(ioc, &num_phys); + if (!num_phys) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return; + } + + if (num_phys > ioc->sas_hba.nr_phys_allocated) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return; + } + ioc->sas_hba.num_phys = num_phys; + port_table = kcalloc(ioc->sas_hba.num_phys, sizeof(struct hba_port), GFP_KERNEL); if (!port_table) @@ -6617,6 +6632,30 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) ioc->sas_hba.phy[i].hba_vphy = 1; } + /* + * Add new HBA phys to STL if these new phys got added as part + * of HBA Firmware upgrade/downgrade operation. + */ + if (!ioc->sas_hba.phy[i].phy) { + if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, + &phy_pg0, i))) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + continue; + } + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + continue; + } + ioc->sas_hba.phy[i].phy_id = i; + mpt3sas_transport_add_host_phy(ioc, + &ioc->sas_hba.phy[i], phy_pg0, + ioc->sas_hba.parent_dev); + continue; + } ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i]. AttachedDevHandle); @@ -6628,6 +6667,19 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) attached_handle, i, link_rate, ioc->sas_hba.phy[i].port); } + /* + * Clear the phy details if this phy got disabled as part of + * HBA Firmware upgrade/downgrade operation. + */ + for (i = ioc->sas_hba.num_phys; + i < ioc->sas_hba.nr_phys_allocated; i++) { + if (ioc->sas_hba.phy[i].phy && + ioc->sas_hba.phy[i].phy->negotiated_linkrate >= + SAS_LINK_RATE_1_5_GBPS) + mpt3sas_transport_update_links(ioc, + ioc->sas_hba.sas_address, 0, i, + MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED, NULL); + } out: kfree(sas_iounit_pg0); } @@ -6660,7 +6712,10 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc) __FILE__, __LINE__, __func__); return; } - ioc->sas_hba.phy = kcalloc(num_phys, + + ioc->sas_hba.nr_phys_allocated = max_t(u8, + MPT_MAX_HBA_NUM_PHYS, num_phys); + ioc->sas_hba.phy = kcalloc(ioc->sas_hba.nr_phys_allocated, sizeof(struct _sas_phy), GFP_KERNEL); if (!ioc->sas_hba.phy) { ioc_err(ioc, "failure at %s:%d/%s()!\n", -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> [ Upstream commit 5ecae9f8c705fae85fe4d2ed9f1b9cddf91e88e9 ] For updating the IOC firmware's timestamp with system timestamp, the driver issues the Mpi26IoUnitControlRequest message. While framing the Mpi26IoUnitControlRequest, the driver should copy the lower 32 bits of the current timestamp into IOCParameterValue field and the higher 32 bits into Reserved7 field. Link: https://lore.kernel.org/r/20211117123215.25487-1-sreekanth.reddy@broadcom.co... Fixes: f98790c00375 ("scsi: mpt3sas: Sync time periodically between driver and firmware") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 8b6757d011a2..94131c0b4f4f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -639,8 +639,8 @@ static void _base_sync_drv_fw_timestamp(struct MPT3SAS_ADAPTER *ioc) mpi_request->IOCParameter = MPI26_SET_IOC_PARAMETER_SYNC_TIMESTAMP; current_time = ktime_get_real(); TimeStamp = ktime_to_ms(current_time); - mpi_request->Reserved7 = cpu_to_le32(TimeStamp & 0xFFFFFFFF); - mpi_request->IOCParameterValue = cpu_to_le32(TimeStamp >> 32); + mpi_request->Reserved7 = cpu_to_le32(TimeStamp >> 32); + mpi_request->IOCParameterValue = cpu_to_le32(TimeStamp & 0xFFFFFFFF); init_completion(&ioc->scsih_cmds.done); ioc->put_smid_default(ioc, smid); dinitprintk(ioc, ioc_info(ioc, -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> [ Upstream commit 208cc9fe6f21112b5cc6cb87065fb8ab66e79316 ] The driver must perform its 4GB boundary check using the pool's DMA address instead of using the virtual address. Link: https://lore.kernel.org/r/20220303140230.13098-1-sreekanth.reddy@broadcom.co... Fixes: d6adc251dd2f ("scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 94131c0b4f4f..4ca04a167ef8 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5737,14 +5737,13 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) */ static int -mpt3sas_check_same_4gb_region(long reply_pool_start_address, u32 pool_sz) +mpt3sas_check_same_4gb_region(dma_addr_t start_address, u32 pool_sz) { - long reply_pool_end_address; + dma_addr_t end_address; - reply_pool_end_address = reply_pool_start_address + pool_sz; + end_address = start_address + pool_sz - 1; - if (upper_32_bits(reply_pool_start_address) == - upper_32_bits(reply_pool_end_address)) + if (upper_32_bits(start_address) == upper_32_bits(end_address)) return 1; else return 0; @@ -5805,7 +5804,7 @@ _base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) } if (!mpt3sas_check_same_4gb_region( - (long)ioc->pcie_sg_lookup[i].pcie_sgl, sz)) { + ioc->pcie_sg_lookup[i].pcie_sgl_dma, sz)) { ioc_err(ioc, "PCIE SGLs are not in same 4G !! pcie sgl (0x%p) dma = (0x%llx)\n", ioc->pcie_sg_lookup[i].pcie_sgl, (unsigned long long) @@ -5860,8 +5859,8 @@ _base_allocate_chain_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) GFP_KERNEL, &ctr->chain_buffer_dma); if (!ctr->chain_buffer) return -EAGAIN; - if (!mpt3sas_check_same_4gb_region((long) - ctr->chain_buffer, ioc->chain_segment_sz)) { + if (!mpt3sas_check_same_4gb_region( + ctr->chain_buffer_dma, ioc->chain_segment_sz)) { ioc_err(ioc, "Chain buffers are not in same 4G !!! Chain buff (0x%p) dma = (0x%llx)\n", ctr->chain_buffer, @@ -5897,7 +5896,7 @@ _base_allocate_sense_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) GFP_KERNEL, &ioc->sense_dma); if (!ioc->sense) return -EAGAIN; - if (!mpt3sas_check_same_4gb_region((long)ioc->sense, sz)) { + if (!mpt3sas_check_same_4gb_region(ioc->sense_dma, sz)) { dinitprintk(ioc, pr_err( "Bad Sense Pool! sense (0x%p) sense_dma = (0x%llx)\n", ioc->sense, (unsigned long long) ioc->sense_dma)); @@ -5930,7 +5929,7 @@ _base_allocate_reply_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) &ioc->reply_dma); if (!ioc->reply) return -EAGAIN; - if (!mpt3sas_check_same_4gb_region((long)ioc->reply_free, sz)) { + if (!mpt3sas_check_same_4gb_region(ioc->reply_dma, sz)) { dinitprintk(ioc, pr_err( "Bad Reply Pool! Reply (0x%p) Reply dma = (0x%llx)\n", ioc->reply, (unsigned long long) ioc->reply_dma)); @@ -5965,7 +5964,7 @@ _base_allocate_reply_free_dma_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) GFP_KERNEL, &ioc->reply_free_dma); if (!ioc->reply_free) return -EAGAIN; - if (!mpt3sas_check_same_4gb_region((long)ioc->reply_free, sz)) { + if (!mpt3sas_check_same_4gb_region(ioc->reply_free_dma, sz)) { dinitprintk(ioc, pr_err("Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n", ioc->reply_free, (unsigned long long) ioc->reply_free_dma)); @@ -6004,7 +6003,7 @@ _base_allocate_reply_post_free_array(struct MPT3SAS_ADAPTER *ioc, GFP_KERNEL, &ioc->reply_post_free_array_dma); if (!ioc->reply_post_free_array) return -EAGAIN; - if (!mpt3sas_check_same_4gb_region((long)ioc->reply_post_free_array, + if (!mpt3sas_check_same_4gb_region(ioc->reply_post_free_array_dma, reply_post_free_array_sz)) { dinitprintk(ioc, pr_err( "Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n", @@ -6069,7 +6068,7 @@ base_alloc_rdpq_dma_pool(struct MPT3SAS_ADAPTER *ioc, int sz) * resources and set DMA mask to 32 and allocate. */ if (!mpt3sas_check_same_4gb_region( - (long)ioc->reply_post[i].reply_post_free, sz)) { + ioc->reply_post[i].reply_post_free_dma, sz)) { dinitprintk(ioc, ioc_err(ioc, "bad Replypost free pool(0x%p)" "reply_post_free_dma = (0x%llx)\n", -- 2.33.0
From: Damien Le Moal <damien.lemoal@opensource.wdc.com> commit 87d663d40801dffc99a5ad3b0188ad3e2b4d1557 upstream. The function mpt3sas_transport_port_remove() called in _scsih_expander_node_remove() frees the port field of the sas_expander structure, leading to the following use-after-free splat from KASAN when the ioc_info() call following that function is executed (e.g. when doing rmmod of the driver module): [ 3479.371167] ================================================================== [ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531 [ 3479.393524] [ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436 [ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021 [ 3479.409263] Call Trace: [ 3479.411743] <TASK> [ 3479.413875] dump_stack_lvl+0x45/0x59 [ 3479.417582] print_address_description.constprop.0+0x1f/0x120 [ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.429469] kasan_report.cold+0x83/0xdf [ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas] [ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas] [ 3479.465529] ? down_write+0xde/0x150 [ 3479.470746] ? up_write+0x14d/0x460 [ 3479.475840] ? kernfs_find_ns+0x137/0x310 [ 3479.481438] pci_device_remove+0x65/0x110 [ 3479.487013] __device_release_driver+0x316/0x680 [ 3479.493180] driver_detach+0x1ec/0x2d0 [ 3479.498499] bus_remove_driver+0xe7/0x2d0 [ 3479.504081] pci_unregister_driver+0x26/0x250 [ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas] [ 3479.516144] __x64_sys_delete_module+0x2fd/0x510 [ 3479.522315] ? free_module+0xaa0/0xaa0 [ 3479.527593] ? __cond_resched+0x1c/0x90 [ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70 [ 3479.546161] ? trace_hardirqs_on+0x1c/0x110 [ 3479.551828] do_syscall_64+0x35/0x80 [ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3479.563402] RIP: 0033:0x7f1fc482483b ... [ 3479.943087] ================================================================== Fix this by introducing the local variable port_id to store the port ID value before executing mpt3sas_transport_port_remove(). This local variable is then used in the call to ioc_info() instead of dereferencing the freed port structure. Link: https://lore.kernel.org/r/20220322055702.95276-1-damien.lemoal@opensource.wd... Fixes: 7d310f241001 ("scsi: mpt3sas: Get device objects using sas_address & portID") Cc: stable@vger.kernel.org Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 4eef52d559c2..ba1e65cafb0d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -11041,6 +11041,7 @@ _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc, { struct _sas_port *mpt3sas_port, *next; unsigned long flags; + int port_id; /* remove sibling ports attached to this expander */ list_for_each_entry_safe(mpt3sas_port, next, @@ -11061,6 +11062,8 @@ _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc, mpt3sas_port->hba_port); } + port_id = sas_expander->port->port_id; + mpt3sas_transport_port_remove(ioc, sas_expander->sas_address, sas_expander->sas_address_parent, sas_expander->port); @@ -11068,7 +11071,7 @@ _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc, "expander_remove: handle(0x%04x), sas_addr(0x%016llx), port:%d\n", sas_expander->handle, (unsigned long long) sas_expander->sas_address, - sas_expander->port->port_id); + port_id); spin_lock_irqsave(&ioc->sas_node_lock, flags); list_del(&sas_expander->list); -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> [ Upstream commit f61eb1216c959f93ffabd3b8781fa5b2b22f8907 ] As part of controller reset operation the driver issues a config request command. If this command gets times out, then fail the controller reset operation instead of retrying it. Link: https://lore.kernel.org/r/20220405120637.20528-1-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_config.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index 0563078227de..a8dd14c91efd 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -394,10 +394,13 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t retry_count++; if (ioc->config_cmds.smid == smid) mpt3sas_base_free_smid(ioc, smid); - if ((ioc->shost_recovery) || (ioc->config_cmds.status & - MPT3_CMD_RESET) || ioc->pci_error_recovery) + if (ioc->config_cmds.status & MPT3_CMD_RESET) goto retry_config; - issue_host_reset = 1; + if (ioc->shost_recovery || ioc->pci_error_recovery) { + issue_host_reset = 0; + r = -EFAULT; + } else + issue_host_reset = 1; goto free_mem; } -- 2.33.0
From: Helge Deller <deller@gmx.de> [ Upstream commit 120f1d95efb1cdb6fe023c84e38ba06d8f78cd03 ] I'm facing this warning when building for the parisc64 architecture: drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’: drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds] 5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’ 5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | ^~~~~~~~~~~~~~~~~~~~~~~ The problem is, that only 20 bytes are allocated with kmalloc(), which is sufficient to hold the bytes which are needed. Nevertheless, gcc complains because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus doesn't fit into those 20 bytes. This patch simply allocates all 32 bytes (instead of 20) and thus avoids the warning. There is no functional change introduced by this patch. While touching the code I cleaned up to calculation of max_wideport_qd, max_narrowport_qd and max_sata_qd to make it easier readable. Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit kernel. Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100 Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 4ca04a167ef8..13c4eca9d2c9 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5381,6 +5381,7 @@ static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc) Mpi2ConfigReply_t mpi_reply; Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; Mpi26PCIeIOUnitPage1_t pcie_iounit_pg1; + u16 depth; int sz; int rc = 0; @@ -5392,7 +5393,7 @@ static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc) goto out; /* sas iounit page 1 */ sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData); - sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); + sas_iounit_pg1 = kzalloc(sizeof(Mpi2SasIOUnitPage1_t), GFP_KERNEL); if (!sas_iounit_pg1) { pr_err("%s: failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); @@ -5405,16 +5406,16 @@ static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc) ioc->name, __FILE__, __LINE__, __func__); goto out; } - ioc->max_wideport_qd = - (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? - le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth) : - MPT3SAS_SAS_QUEUE_DEPTH; - ioc->max_narrowport_qd = - (le16_to_cpu(sas_iounit_pg1->SASNarrowMaxQueueDepth)) ? - le16_to_cpu(sas_iounit_pg1->SASNarrowMaxQueueDepth) : - MPT3SAS_SAS_QUEUE_DEPTH; - ioc->max_sata_qd = (sas_iounit_pg1->SATAMaxQDepth) ? - sas_iounit_pg1->SATAMaxQDepth : MPT3SAS_SATA_QUEUE_DEPTH; + + depth = le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth); + ioc->max_wideport_qd = (depth ? depth : MPT3SAS_SAS_QUEUE_DEPTH); + + depth = le16_to_cpu(sas_iounit_pg1->SASNarrowMaxQueueDepth); + ioc->max_narrowport_qd = (depth ? depth : MPT3SAS_SAS_QUEUE_DEPTH); + + depth = sas_iounit_pg1->SATAMaxQDepth; + ioc->max_sata_qd = (depth ? depth : MPT3SAS_SATA_QUEUE_DEPTH); + /* pcie iounit page 1 */ rc = mpt3sas_config_get_pcie_iounit_pg1(ioc, &mpi_reply, &pcie_iounit_pg1, sizeof(Mpi26PCIeIOUnitPage1_t)); -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> commit 991df3dd5144f2e6b1c38b8d20ed3d4d21e20b34 upstream. Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index ba1e65cafb0d..1aff0faf3658 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3670,6 +3670,7 @@ static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc) fw_event = list_first_entry(&ioc->fw_event_list, struct fw_event_work, list); list_del_init(&fw_event->list); + fw_event_work_put(fw_event); } spin_unlock_irqrestore(&ioc->fw_event_lock, flags); @@ -3751,7 +3752,6 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc) if (cancel_work_sync(&fw_event->work)) fw_event_work_put(fw_event); - fw_event_work_put(fw_event); } ioc->fw_events_cleanup = 0; } -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> [ Upstream commit e0e0747de0ea3dd87cdbb0393311e17471a9baf1 ] Fix the incorrect return value check of dma_get_required_mask(). Due to this incorrect check, the driver was always setting the DMA mask to 63 bit. Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.co... Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 13c4eca9d2c9..d1d7e7776180 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -3005,7 +3005,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma || - dma_get_required_mask(&pdev->dev) <= 32) + dma_get_required_mask(&pdev->dev) <= DMA_BIT_MASK(32)) ioc->dma_mask = 32; /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) -- 2.33.0
From: Yang Yingliang <yangyingliang@huawei.com> [ Upstream commit 78316e9dfc24906dd474630928ed1d3c562b568e ] In mpt3sas_transport_port_add(), if sas_rphy_add() returns error, sas_rphy_free() needs be called to free the resource allocated in sas_end_device_alloc(). Otherwise a kernel crash will happen: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_rphy_remove+0x50/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_rphy_remove+0x38/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] scsih_remove+0xd8/0x420 [mpt3sas] Because transport_add_device() is not called when sas_rphy_add() fails, the device is not added. When sas_rphy_remove() is subsequently called to remove the device in the remove() path, a NULL pointer dereference happens. Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_transport.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 0681daee6c14..e5ecd6ada6cd 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -829,6 +829,8 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, if ((sas_rphy_add(rphy))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); + sas_rphy_free(rphy); + rphy = NULL; } if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> commit 0c25422d34b4726b2707d5f38560943155a91b80 upstream. When scsi_dma_map() fails by returning a sges_left value less than zero, the amount of logging produced can be extremely high. In a recent end-user environment, 1200 messages per second were being sent to the log buffer. This eventually overwhelmed the system and it stalled. These error messages are not needed. Remove them. Link: https://lore.kernel.org/r/20220303140203.12642-1-sreekanth.reddy@broadcom.co... Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index d1d7e7776180..eb8581033dda 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2594,12 +2594,8 @@ _base_check_pcie_native_sgl(struct MPT3SAS_ADAPTER *ioc, /* Get the SG list pointer and info. */ sges_left = scsi_dma_map(scmd); - if (sges_left < 0) { - sdev_printk(KERN_ERR, scmd->device, - "scsi_dma_map failed: request for %d bytes!\n", - scsi_bufflen(scmd)); + if (sges_left < 0) return 1; - } /* Check if we need to build a native SG list. */ if (!base_is_prp_possible(ioc, pcie_device, @@ -2706,12 +2702,8 @@ _base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc, sg_scmd = scsi_sglist(scmd); sges_left = scsi_dma_map(scmd); - if (sges_left < 0) { - sdev_printk(KERN_ERR, scmd->device, - "scsi_dma_map failed: request for %d bytes!\n", - scsi_bufflen(scmd)); + if (sges_left < 0) return -ENOMEM; - } sg_local = &mpi_request->SGL; sges_in_segment = ioc->max_sges_in_main_message; @@ -2854,12 +2846,8 @@ _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc, sg_scmd = scsi_sglist(scmd); sges_left = scsi_dma_map(scmd); - if (sges_left < 0) { - sdev_printk(KERN_ERR, scmd->device, - "scsi_dma_map failed: request for %d bytes!\n", - scsi_bufflen(scmd)); + if (sges_left < 0) return -ENOMEM; - } sg_local = &mpi_request->SGL; sges_in_segment = (ioc->request_sz - -- 2.33.0
From: Tomas Henzl <thenzl@redhat.com> [ Upstream commit 54dd96015e8d7a2a07359e2dfebf05b529d1780c ] Add a forgotten kfree(). Fixes: dbec4c9040ed ("scsi: mpt3sas: lockless command submission") Link: https://lore.kernel.org/r/20230207152159.18627-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index eb8581033dda..158e718a7b37 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5682,6 +5682,9 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) } dma_pool_destroy(ioc->pcie_sgl_dma_pool); } + kfree(ioc->pcie_sg_lookup); + ioc->pcie_sg_lookup = NULL; + if (ioc->config_page) { dexitprintk(ioc, ioc_info(ioc, "config_page(0x%p): free\n", -- 2.33.0
From: Salvatore Bonaccorso <carnil@debian.org> Commit 2b9aba0c5d58e141e32bb1bb4c7cd91d19f075b8 upstream. This reverts commit e0e0747de0ea3dd87cdbb0393311e17471a9baf1. As noted in 1a2dcbdde82e ("scsi: mpt3sas: re-do lost mpt3sas DMA mask fix") in mainline there was a mis-merge in commit 62e6e5940c0c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi"). causing that the fix needed to be redone later on again. To make series of patches apply cleanly to the stable series where e0e0747de0ea ("scsi: mpt3sas: Fix return value check of dma_get_required_mask()") was backported, revert the aforementioned commit. No upstream commit exists for this commit. Link: https://lore.kernel.org/regressions/yq1sfehmjnb.fsf@ca-mkp.ca.oracle.com/ Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 158e718a7b37..9ccd06734911 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2993,7 +2993,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma || - dma_get_required_mask(&pdev->dev) <= DMA_BIT_MASK(32)) + dma_get_required_mask(&pdev->dev) <= 32) ioc->dma_mask = 32; /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> commit 9df650963bf6d6c2c3fcd325d8c44ca2b99554fe upstream. When a pool crosses the 4GB boundary region then before reallocating pools change the coherent DMA mask to 32 bits and keep the normal DMA mask set to 63/64 bits. Link: https://lore.kernel.org/r/20220825075457.16422-2-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 9ccd06734911..4a24f13b6f89 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2990,19 +2990,26 @@ static int _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) { struct sysinfo s; + u64 coherent_dma_mask, dma_mask; - if (ioc->is_mcpu_endpoint || - sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma || - dma_get_required_mask(&pdev->dev) <= 32) + if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || + dma_get_required_mask(&pdev->dev) <= 32) { ioc->dma_mask = 32; + coherent_dma_mask = dma_mask = DMA_BIT_MASK(32); /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ - else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) + } else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) { ioc->dma_mask = 63; - else + coherent_dma_mask = dma_mask = DMA_BIT_MASK(63); + } else { ioc->dma_mask = 64; + coherent_dma_mask = dma_mask = DMA_BIT_MASK(64); + } + + if (ioc->use_32bit_dma) + coherent_dma_mask = DMA_BIT_MASK(32); - if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask)) || - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask))) + if (dma_set_mask(&pdev->dev, dma_mask) || + dma_set_coherent_mask(&pdev->dev, coherent_dma_mask)) return -ENODEV; if (ioc->dma_mask > 32) { -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> commit 1a2dcbdde82e3a5f1db9b2f4c48aa1aeba534fb2 upstream. This is a re-do of commit e0e0747de0ea ("scsi: mpt3sas: Fix return value check of dma_get_required_mask()"), which I ended up undoing in a mis-merge in commit 62e6e5940c0c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi"). The original commit message was scsi: mpt3sas: Fix return value check of dma_get_required_mask() Fix the incorrect return value check of dma_get_required_mask(). Due to this incorrect check, the driver was always setting the DMA mask to 63 bit. Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.co... Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> and this fix was lost when I mis-merged the conflict with commit 9df650963bf6 ("scsi: mpt3sas: Don't change DMA mask while reallocating pools"). Reported-by: Juergen Gross <jgross@suse.com> Fixes: 62e6e5940c0c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi") Link: https://lore.kernel.org/all/CAHk-=wjaK-TxrNaGtFDpL9qNHL1MVkWXO1TT6vObD5tXMSC... Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 4a24f13b6f89..d973ae539c33 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2993,7 +2993,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) u64 coherent_dma_mask, dma_mask; if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || - dma_get_required_mask(&pdev->dev) <= 32) { + dma_get_required_mask(&pdev->dev) <= DMA_BIT_MASK(32)) { ioc->dma_mask = 32; coherent_dma_mask = dma_mask = DMA_BIT_MASK(32); /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> commit 06e472acf964649a58b7de35fc9cdc3151acb970 upstream. Remove the usage of dma_get_required_mask() API. Directly set the DMA mask to 63/64 if the system is a 64bit machine. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20221028091655.17741-2-sreekanth.reddy@broadcom.co... Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index d973ae539c33..bc7705dfb050 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2992,8 +2992,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) struct sysinfo s; u64 coherent_dma_mask, dma_mask; - if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || - dma_get_required_mask(&pdev->dev) <= DMA_BIT_MASK(32)) { + if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4) { ioc->dma_mask = 32; coherent_dma_mask = dma_mask = DMA_BIT_MASK(32); /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ -- 2.33.0
From: Wenchao Hao <haowenchao2@huawei.com> [ Upstream commit d3c57724f1569311e4b81e98fad0931028b9bdcd ] Port is allocated by sas_port_alloc_num() and rphy is allocated by either sas_end_device_alloc() or sas_expander_alloc(), all of which may return NULL. So we need to check the rphy to avoid possible NULL pointer access. If sas_rphy_add() returned with failure, rphy is set to NULL. We would access the rphy in the following lines which would also result NULL pointer access. Fixes: 78316e9dfc24 ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()") Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_transport.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index e5ecd6ada6cd..e8a4750f6ec4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -785,7 +785,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, goto out_fail; } port = sas_port_alloc_num(sas_node->parent_dev); - if ((sas_port_add(port))) { + if (!port || (sas_port_add(port))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); goto out_fail; @@ -824,6 +824,12 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, mpt3sas_port->remote_identify.sas_address; } + if (!rphy) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_delete_port; + } + rphy->identify = mpt3sas_port->remote_identify; if ((sas_rphy_add(rphy))) { @@ -831,6 +837,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, __FILE__, __LINE__, __func__); sas_rphy_free(rphy); rphy = NULL; + goto out_delete_port; } if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { @@ -857,7 +864,10 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, rphy_to_expander_device(rphy), hba_port->port_id); return mpt3sas_port; - out_fail: +out_delete_port: + sas_port_delete(port); + +out_fail: list_for_each_entry_safe(mpt3sas_phy, next, &mpt3sas_port->phy_list, port_siblings) list_del(&mpt3sas_phy->port_siblings); -- 2.33.0
From: Jerry Snitselaar <jsnitsel@redhat.com> [ Upstream commit d684a7a26f7d2c7122a4581ac966ed64e88fb29c ] _base_allocate_sense_dma_pool() already prints out the sense pool information, so don't print it a second time after calling it in _base_allocate_memory_pools(). In addition the version in _base_allocate_memory_pools() was using the wrong size value, sz, which was last assigned when doing some nvme calculations instead of sense_sz to determine the pool size in kilobytes. Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@broadcom.com Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Fixes: 970ac2bb70e7 ("scsi: mpt3sas: Force sense buffer allocations to be within same 4 GB region") Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20230324193204.567932-1-jsnitsel@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Integrated-by: Siyu Zhang <siyu.zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index bc7705dfb050..2f59e14a39b0 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -6456,11 +6456,6 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) else if (rc == -EAGAIN) goto try_32bit_dma; total_sz += sense_sz; - ioc_info(ioc, - "sense pool(0x%p)- dma(0x%llx): depth(%d)," - "element_size(%d), pool_size(%d kB)\n", - ioc->sense, (unsigned long long)ioc->sense_dma, ioc->scsiio_depth, - SCSI_SENSE_BUFFERSIZE, sz / 1024); /* reply pool, 4 byte align */ sz = ioc->reply_free_queue_depth * ioc->reply_sz; rc = _base_allocate_reply_pool(ioc, sz); -- 2.33.0
participants (1)
-
Hao Zhang