hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4GUAB CVE: NA ------------------------------- Add generic macro for kabi padding reserve for openEuler kernel. This Macro should used to reserve kabi padding for base data structs before kabi freeze. Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- include/linux/kabi.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 include/linux/kabi.h diff --git a/include/linux/kabi.h b/include/linux/kabi.h new file mode 100644 index 000000000000..10c3dcfbbe55 --- /dev/null +++ b/include/linux/kabi.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * kabi.h - openEuler kABI abstraction header + * + * Copyright (C) 2021. Huawei Technologies Co., Ltd. All rights reserved. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_KABI_H +#define _LINUX_KABI_H + +/* + * Macro for Reserving KABI padding for base data structs before KABI freeze. + */ + +#define KABI_RESERVE(n) unsigned long kabi_reserved##n; + +#endif /* _LINUX_KABI_H */ -- 2.20.1

From: Li Jinlin <lijinlin3@huawei.com> mainline inclusion from mainline-5.14 commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 category: bugfix bugzilla: 181877 https://gitee.com/openeuler/kernel/issues/I4DDEL --------------------------- The pending timer has been set up in blk_throtl_init(). However, the timer is not deleted in blk_throtl_exit(). This means that the timer handler may still be running after freeing the timer, which would result in a use-after-free. Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit(). Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- block/blk-throttle.c | 1 + 1 file changed, 1 insertion(+) diff --git a/block/blk-throttle.c b/block/blk-throttle.c index f05e932cf816..4087dcc13f7d 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -2487,6 +2487,7 @@ int blk_throtl_init(struct request_queue *q) void blk_throtl_exit(struct request_queue *q) { BUG_ON(!q->td); + del_timer_sync(&q->td->service_queue.pending_timer); throtl_shutdown_wq(q); blkcg_deactivate_policy(q, &blkcg_policy_throtl); free_percpu(q->td->latency_buckets[READ]); -- 2.20.1

From: Baokun Li <libaokun1@huawei.com> mainline inclusion from mainline-5.14 commit fad7cd3310db3099f95dd34312c77740fbc455e5 category: bugfix bugzilla: 175174 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... ------------------------------------------------- If user specify a large enough value of NBD blocks option, it may trigger signed integer overflow which may lead to nbd->config->bytesize becomes a large or small value, zero in particular. UBSAN: Undefined behaviour in drivers/block/nbd.c:325:31 signed integer overflow: 1024 * 4611686155866341414 cannot be represented in type 'long long int' [...] Call trace: [...] handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_mul_overflow+0x34/0x44 lib/ubsan.c:213 nbd_size_set drivers/block/nbd.c:325 [inline] __nbd_ioctl drivers/block/nbd.c:1342 [inline] nbd_ioctl+0x998/0xa10 drivers/block/nbd.c:1395 __blkdev_driver_ioctl block/ioctl.c:311 [inline] [...] Although it is not a big deal, still silence the UBSAN by limit the input value. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20210804021212.990223-1-libaokun1@huawei.com [axboe: dropped unlikely()] Signed-off-by: Jens Axboe <axboe@kernel.dk> Conflicts: drivers/block/nbd.c Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/block/nbd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 59c452fff835..8a841d5f422d 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1385,6 +1385,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, unsigned int cmd, unsigned long arg) { struct nbd_config *config = nbd->config; + loff_t bytesize; switch (cmd) { case NBD_DISCONNECT: @@ -1407,6 +1408,8 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, div_s64(arg, config->blksize)); return 0; case NBD_SET_SIZE_BLOCKS: + if (check_mul_overflow((loff_t)arg, config->blksize, &bytesize)) + return -EINVAL; nbd_size_set(nbd, config->blksize, arg); return 0; case NBD_SET_TIMEOUT: -- 2.20.1

From: Barry Song <song.bao.hua@hisilicon.com> mainline inclusion from mainline-v5.13-rc1 commit 585b6d2723dc927ebc4ad884c4e879e4da8bc21f category: bugfix bugzilla: 182847 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... ---------------------------------------------------------- As long as NUMA diameter > 2, building sched_domain by sibling's child domain will definitely create a sched_domain with sched_group which will span out of the sched_domain: +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 node2 node3 domain1 node0+1 node0+1 node2+3 node2+3 + domain2 node0+1+2 | group: node0+1 | group:node2+3 <-------------------+ when node2 is added into the domain2 of node0, kernel is using the child domain of node2's domain2, which is domain1(node2+3). Node 3 is outside the span of the domain including node0+1+2. This will make load_balance() run based on screwed avg_load and group_type in the sched_group spanning out of the sched_domain, and it also makes select_task_rq_fair() pick an idle CPU outside the sched_domain. Real servers which suffer from this problem include Kunpeng920 and 8-node Sun Fire X4600-M2, at least. Here we move to use the *child* domain of the *child* domain of node2's domain2 as the new added sched_group. At the same, we re-use the lower level sgc directly. +------+ +------+ +-------+ +------+ | node | 12 |node | 20 | node | 12 |node | | 0 +---------+1 +--------+ 2 +-------+3 | +------+ +------+ +-------+ +------+ domain0 node0 node1 +- node2 node3 | domain1 node0+1 node0+1 | node2+3 node2+3 | domain2 node0+1+2 | group: node0+1 | group:node2 <-------------------+ While the lower level sgc is re-used, this patch only changes the remote sched_groups for those sched_domains playing grandchild trick, therefore, sgc->next_update is still safe since it's only touched by CPUs that have the group span as local group. And sgc->imbalance is also safe because sd_parent remains the same in load_balance and LB only tries other CPUs from the local group. Moreover, since local groups are not touched, they are still getting roughly equal size in a TL. And should_we_balance() only matters with local groups, so the pull probability of those groups are still roughly equal. Tested by the below topology: qemu-system-aarch64 -M virt -nographic \ -smp cpus=8 \ -numa node,cpus=0-1,nodeid=0 \ -numa node,cpus=2-3,nodeid=1 \ -numa node,cpus=4-5,nodeid=2 \ -numa node,cpus=6-7,nodeid=3 \ -numa dist,src=0,dst=1,val=12 \ -numa dist,src=0,dst=2,val=20 \ -numa dist,src=0,dst=3,val=22 \ -numa dist,src=1,dst=2,val=22 \ -numa dist,src=2,dst=3,val=12 \ -numa dist,src=1,dst=3,val=24 \ -m 4G -cpu cortex-a57 -kernel arch/arm64/boot/Image w/o patch, we get lots of "groups don't span domain->span": [ 0.802139] CPU0 attaching sched-domain(s): [ 0.802193] domain-0: span=0-1 level=MC [ 0.802443] groups: 0:{ span=0 cap=1013 }, 1:{ span=1 cap=979 } [ 0.802693] domain-1: span=0-3 level=NUMA [ 0.802731] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.802811] domain-2: span=0-5 level=NUMA [ 0.802829] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.802881] ERROR: groups don't span domain->span [ 0.803058] domain-3: span=0-7 level=NUMA [ 0.803080] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804055] CPU1 attaching sched-domain(s): [ 0.804072] domain-0: span=0-1 level=MC [ 0.804096] groups: 1:{ span=1 cap=979 }, 0:{ span=0 cap=1013 } [ 0.804152] domain-1: span=0-3 level=NUMA [ 0.804170] groups: 0:{ span=0-1 cap=1992 }, 2:{ span=2-3 cap=1943 } [ 0.804219] domain-2: span=0-5 level=NUMA [ 0.804236] groups: 0:{ span=0-3 cap=3935 }, 4:{ span=4-7 cap=3937 } [ 0.804302] ERROR: groups don't span domain->span [ 0.804520] domain-3: span=0-7 level=NUMA [ 0.804546] groups: 0:{ span=0-5 mask=0-1 cap=5843 }, 6:{ span=4-7 mask=6-7 cap=4077 } [ 0.804677] CPU2 attaching sched-domain(s): [ 0.804687] domain-0: span=2-3 level=MC [ 0.804705] groups: 2:{ span=2 cap=934 }, 3:{ span=3 cap=1009 } [ 0.804754] domain-1: span=0-3 level=NUMA [ 0.804772] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.804820] domain-2: span=0-5 level=NUMA [ 0.804836] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.804944] ERROR: groups don't span domain->span [ 0.805108] domain-3: span=0-7 level=NUMA [ 0.805134] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805223] CPU3 attaching sched-domain(s): [ 0.805232] domain-0: span=2-3 level=MC [ 0.805249] groups: 3:{ span=3 cap=1009 }, 2:{ span=2 cap=934 } [ 0.805319] domain-1: span=0-3 level=NUMA [ 0.805336] groups: 2:{ span=2-3 cap=1943 }, 0:{ span=0-1 cap=1992 } [ 0.805383] domain-2: span=0-5 level=NUMA [ 0.805399] groups: 2:{ span=0-3 mask=2-3 cap=3991 }, 4:{ span=0-1,4-7 mask=4-5 cap=5985 } [ 0.805458] ERROR: groups don't span domain->span [ 0.805605] domain-3: span=0-7 level=NUMA [ 0.805626] groups: 2:{ span=0-5 mask=2-3 cap=5899 }, 6:{ span=0-1,4-7 mask=6-7 cap=6125 } [ 0.805712] CPU4 attaching sched-domain(s): [ 0.805721] domain-0: span=4-5 level=MC [ 0.805738] groups: 4:{ span=4 cap=984 }, 5:{ span=5 cap=924 } [ 0.805787] domain-1: span=4-7 level=NUMA [ 0.805803] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.805851] domain-2: span=0-1,4-7 level=NUMA [ 0.805867] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.805915] ERROR: groups don't span domain->span [ 0.806108] domain-3: span=0-7 level=NUMA [ 0.806130] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.806214] CPU5 attaching sched-domain(s): [ 0.806222] domain-0: span=4-5 level=MC [ 0.806240] groups: 5:{ span=5 cap=924 }, 4:{ span=4 cap=984 } [ 0.806841] domain-1: span=4-7 level=NUMA [ 0.806866] groups: 4:{ span=4-5 cap=1908 }, 6:{ span=6-7 cap=2029 } [ 0.806934] domain-2: span=0-1,4-7 level=NUMA [ 0.806953] groups: 4:{ span=4-7 cap=3937 }, 0:{ span=0-3 cap=3935 } [ 0.807004] ERROR: groups don't span domain->span [ 0.807312] domain-3: span=0-7 level=NUMA [ 0.807386] groups: 4:{ span=0-1,4-7 mask=4-5 cap=5985 }, 2:{ span=0-3 mask=2-3 cap=3991 } [ 0.807686] CPU6 attaching sched-domain(s): [ 0.807710] domain-0: span=6-7 level=MC [ 0.807750] groups: 6:{ span=6 cap=1017 }, 7:{ span=7 cap=1012 } [ 0.807840] domain-1: span=4-7 level=NUMA [ 0.807870] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.807952] domain-2: span=0-1,4-7 level=NUMA [ 0.807985] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.808045] ERROR: groups don't span domain->span [ 0.808257] domain-3: span=0-7 level=NUMA [ 0.808571] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6125 }, 2:{ span=0-5 mask=2-3 cap=5899 } [ 0.808848] CPU7 attaching sched-domain(s): [ 0.808860] domain-0: span=6-7 level=MC [ 0.808880] groups: 7:{ span=7 cap=1012 }, 6:{ span=6 cap=1017 } [ 0.808953] domain-1: span=4-7 level=NUMA [ 0.808974] groups: 6:{ span=6-7 cap=2029 }, 4:{ span=4-5 cap=1908 } [ 0.809034] domain-2: span=0-1,4-7 level=NUMA [ 0.809055] groups: 6:{ span=4-7 mask=6-7 cap=4077 }, 0:{ span=0-5 mask=0-1 cap=5843 } [ 0.809128] ERROR: groups don't span domain->span [ 0.810361] domain-3: span=0-7 level=NUMA [ 0.810400] groups: 6:{ span=0-1,4-7 mask=6-7 cap=5961 }, 2:{ span=0-5 mask=2-3 cap=5903 } w/ patch, we don't get "groups don't span domain->span" any more: [ 1.486271] CPU0 attaching sched-domain(s): [ 1.486820] domain-0: span=0-1 level=MC [ 1.500924] groups: 0:{ span=0 cap=980 }, 1:{ span=1 cap=994 } [ 1.515717] domain-1: span=0-3 level=NUMA [ 1.515903] groups: 0:{ span=0-1 cap=1974 }, 2:{ span=2-3 cap=1989 } [ 1.516989] domain-2: span=0-5 level=NUMA [ 1.517124] groups: 0:{ span=0-3 cap=3963 }, 4:{ span=4-5 cap=1949 } [ 1.517369] domain-3: span=0-7 level=NUMA [ 1.517423] groups: 0:{ span=0-5 mask=0-1 cap=5912 }, 6:{ span=4-7 mask=6-7 cap=4054 } [ 1.520027] CPU1 attaching sched-domain(s): [ 1.520097] domain-0: span=0-1 level=MC [ 1.520184] groups: 1:{ span=1 cap=994 }, 0:{ span=0 cap=980 } [ 1.520429] domain-1: span=0-3 level=NUMA [ 1.520487] groups: 0:{ span=0-1 cap=1974 }, 2:{ span=2-3 cap=1989 } [ 1.520687] domain-2: span=0-5 level=NUMA [ 1.520744] groups: 0:{ span=0-3 cap=3963 }, 4:{ span=4-5 cap=1949 } [ 1.520948] domain-3: span=0-7 level=NUMA [ 1.521038] groups: 0:{ span=0-5 mask=0-1 cap=5912 }, 6:{ span=4-7 mask=6-7 cap=4054 } [ 1.522068] CPU2 attaching sched-domain(s): [ 1.522348] domain-0: span=2-3 level=MC [ 1.522606] groups: 2:{ span=2 cap=1003 }, 3:{ span=3 cap=986 } [ 1.522832] domain-1: span=0-3 level=NUMA [ 1.522885] groups: 2:{ span=2-3 cap=1989 }, 0:{ span=0-1 cap=1974 } [ 1.523043] domain-2: span=0-5 level=NUMA [ 1.523092] groups: 2:{ span=0-3 mask=2-3 cap=4037 }, 4:{ span=4-5 cap=1949 } [ 1.523302] domain-3: span=0-7 level=NUMA [ 1.523352] groups: 2:{ span=0-5 mask=2-3 cap=5986 }, 6:{ span=0-1,4-7 mask=6-7 cap=6102 } [ 1.523748] CPU3 attaching sched-domain(s): [ 1.523774] domain-0: span=2-3 level=MC [ 1.523825] groups: 3:{ span=3 cap=986 }, 2:{ span=2 cap=1003 } [ 1.524009] domain-1: span=0-3 level=NUMA [ 1.524086] groups: 2:{ span=2-3 cap=1989 }, 0:{ span=0-1 cap=1974 } [ 1.524281] domain-2: span=0-5 level=NUMA [ 1.524331] groups: 2:{ span=0-3 mask=2-3 cap=4037 }, 4:{ span=4-5 cap=1949 } [ 1.524534] domain-3: span=0-7 level=NUMA [ 1.524586] groups: 2:{ span=0-5 mask=2-3 cap=5986 }, 6:{ span=0-1,4-7 mask=6-7 cap=6102 } [ 1.524847] CPU4 attaching sched-domain(s): [ 1.524873] domain-0: span=4-5 level=MC [ 1.524954] groups: 4:{ span=4 cap=958 }, 5:{ span=5 cap=991 } [ 1.525105] domain-1: span=4-7 level=NUMA [ 1.525153] groups: 4:{ span=4-5 cap=1949 }, 6:{ span=6-7 cap=2006 } [ 1.525368] domain-2: span=0-1,4-7 level=NUMA [ 1.525428] groups: 4:{ span=4-7 cap=3955 }, 0:{ span=0-1 cap=1974 } [ 1.532726] domain-3: span=0-7 level=NUMA [ 1.532811] groups: 4:{ span=0-1,4-7 mask=4-5 cap=6003 }, 2:{ span=0-3 mask=2-3 cap=4037 } [ 1.534125] CPU5 attaching sched-domain(s): [ 1.534159] domain-0: span=4-5 level=MC [ 1.534303] groups: 5:{ span=5 cap=991 }, 4:{ span=4 cap=958 } [ 1.534490] domain-1: span=4-7 level=NUMA [ 1.534572] groups: 4:{ span=4-5 cap=1949 }, 6:{ span=6-7 cap=2006 } [ 1.534734] domain-2: span=0-1,4-7 level=NUMA [ 1.534783] groups: 4:{ span=4-7 cap=3955 }, 0:{ span=0-1 cap=1974 } [ 1.536057] domain-3: span=0-7 level=NUMA [ 1.536430] groups: 4:{ span=0-1,4-7 mask=4-5 cap=6003 }, 2:{ span=0-3 mask=2-3 cap=3896 } [ 1.536815] CPU6 attaching sched-domain(s): [ 1.536846] domain-0: span=6-7 level=MC [ 1.536934] groups: 6:{ span=6 cap=1005 }, 7:{ span=7 cap=1001 } [ 1.537144] domain-1: span=4-7 level=NUMA [ 1.537262] groups: 6:{ span=6-7 cap=2006 }, 4:{ span=4-5 cap=1949 } [ 1.537553] domain-2: span=0-1,4-7 level=NUMA [ 1.537613] groups: 6:{ span=4-7 mask=6-7 cap=4054 }, 0:{ span=0-1 cap=1805 } [ 1.537872] domain-3: span=0-7 level=NUMA [ 1.537998] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6102 }, 2:{ span=0-5 mask=2-3 cap=5845 } [ 1.538448] CPU7 attaching sched-domain(s): [ 1.538505] domain-0: span=6-7 level=MC [ 1.538586] groups: 7:{ span=7 cap=1001 }, 6:{ span=6 cap=1005 } [ 1.538746] domain-1: span=4-7 level=NUMA [ 1.538798] groups: 6:{ span=6-7 cap=2006 }, 4:{ span=4-5 cap=1949 } [ 1.539048] domain-2: span=0-1,4-7 level=NUMA [ 1.539111] groups: 6:{ span=4-7 mask=6-7 cap=4054 }, 0:{ span=0-1 cap=1805 } [ 1.539571] domain-3: span=0-7 level=NUMA [ 1.539610] groups: 6:{ span=0-1,4-7 mask=6-7 cap=6102 }, 2:{ span=0-5 mask=2-3 cap=5845 } Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Meelis Roos <mroos@linux.ee> Link: https://lkml.kernel.org/r/20210224030944.15232-1-song.bao.hua@hisilicon.com Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Cheng Jian <cj.chengjian@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- kernel/sched/topology.c | 91 +++++++++++++++++++++++++++-------------- 1 file changed, 61 insertions(+), 30 deletions(-) diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c index 23c20aa5391f..287f763656fc 100644 --- a/kernel/sched/topology.c +++ b/kernel/sched/topology.c @@ -736,35 +736,6 @@ cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu) for (tmp = sd; tmp; tmp = tmp->parent) numa_distance += !!(tmp->flags & SD_NUMA); - /* - * FIXME: Diameter >=3 is misrepresented. - * - * Smallest diameter=3 topology is: - * - * node 0 1 2 3 - * 0: 10 20 30 40 - * 1: 20 10 20 30 - * 2: 30 20 10 20 - * 3: 40 30 20 10 - * - * 0 --- 1 --- 2 --- 3 - * - * NUMA-3 0-3 N/A N/A 0-3 - * groups: {0-2},{1-3} {1-3},{0-2} - * - * NUMA-2 0-2 0-3 0-3 1-3 - * groups: {0-1},{1-3} {0-2},{2-3} {1-3},{0-1} {2-3},{0-2} - * - * NUMA-1 0-1 0-2 1-3 2-3 - * groups: {0},{1} {1},{2},{0} {2},{3},{1} {3},{2} - * - * NUMA-0 0 1 2 3 - * - * The NUMA-2 groups for nodes 0 and 3 are obviously buggered, as the - * group span isn't a subset of the domain span. - */ - WARN_ONCE(numa_distance > 2, "Shortest NUMA path spans too many nodes\n"); - sched_domain_debug(sd, cpu); rq_attach_root(rq, rd); @@ -995,6 +966,31 @@ static void init_overlap_sched_group(struct sched_domain *sd, sg->sgc->max_capacity = SCHED_CAPACITY_SCALE; } +static struct sched_domain * +find_descended_sibling(struct sched_domain *sd, struct sched_domain *sibling) +{ + /* + * The proper descendant would be the one whose child won't span out + * of sd + */ + while (sibling->child && + !cpumask_subset(sched_domain_span(sibling->child), + sched_domain_span(sd))) + sibling = sibling->child; + + /* + * As we are referencing sgc across different topology level, we need + * to go down to skip those sched_domains which don't contribute to + * scheduling because they will be degenerated in cpu_attach_domain + */ + while (sibling->child && + cpumask_equal(sched_domain_span(sibling->child), + sched_domain_span(sibling))) + sibling = sibling->child; + + return sibling; +} + static int build_overlap_sched_groups(struct sched_domain *sd, int cpu) { @@ -1028,6 +1024,41 @@ build_overlap_sched_groups(struct sched_domain *sd, int cpu) if (!cpumask_test_cpu(i, sched_domain_span(sibling))) continue; + /* + * Usually we build sched_group by sibling's child sched_domain + * But for machines whose NUMA diameter are 3 or above, we move + * to build sched_group by sibling's proper descendant's child + * domain because sibling's child sched_domain will span out of + * the sched_domain being built as below. + * + * Smallest diameter=3 topology is: + * + * node 0 1 2 3 + * 0: 10 20 30 40 + * 1: 20 10 20 30 + * 2: 30 20 10 20 + * 3: 40 30 20 10 + * + * 0 --- 1 --- 2 --- 3 + * + * NUMA-3 0-3 N/A N/A 0-3 + * groups: {0-2},{1-3} {1-3},{0-2} + * + * NUMA-2 0-2 0-3 0-3 1-3 + * groups: {0-1},{1-3} {0-2},{2-3} {1-3},{0-1} {2-3},{0-2} + * + * NUMA-1 0-1 0-2 1-3 2-3 + * groups: {0},{1} {1},{2},{0} {2},{3},{1} {3},{2} + * + * NUMA-0 0 1 2 3 + * + * The NUMA-2 groups for nodes 0 and 3 are obviously buggered, as the + * group span isn't a subset of the domain span. + */ + if (sibling->child && + !cpumask_subset(sched_domain_span(sibling->child), span)) + sibling = find_descended_sibling(sd, sibling); + sg = build_group_from_child_sched_domain(sibling, cpu); if (!sg) goto fail; @@ -1035,7 +1066,7 @@ build_overlap_sched_groups(struct sched_domain *sd, int cpu) sg_span = sched_group_span(sg); cpumask_or(covered, covered, sg_span); - init_overlap_sched_group(sd, sg); + init_overlap_sched_group(sibling, sg); if (!first) first = sg; -- 2.20.1

From: Valentin Schneider <valentin.schneider@arm.com> mainline inclusion from mainline-v5.13-rc1 commit b22a8f7b4bde4e4ab73b64908ffd5d90ecdcdbfd category: bugfix bugzilla: 182847 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... ---------------------------------------------------------- John Paul reported a warning about bogus NUMA distance values spurred by commit: 620a6dc40754 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort") In this case, the afflicted machine comes up with a reported 256 possible nodes, all of which are 0 distance away from one another. This was previously silently ignored, but is now caught by the aforementioned commit. The culprit is ia64's node_possible_map which remains unchanged from its initialization value of NODE_MASK_ALL. In John's case, the machine doesn't have any SRAT nor SLIT table, but AIUI the possible map remains untouched regardless of what ACPI tables end up being parsed. Thus, !online && possible nodes remain with a bogus distance of 0 (distances \in [0, 9] are "reserved and have no meaning" as per the ACPI spec). Follow x86 / drivers/base/arch_numa's example and set the possible map to the parsed map, which in this case seems to be the online map. Link: http://lore.kernel.org/r/255d6b5d-194e-eb0e-ecdd-97477a534441@physik.fu-berl... Link: https://lkml.kernel.org/r/20210318130617.896309-1-valentin.schneider@arm.com Fixes: 620a6dc40754 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort") Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Sergei Trofimovich <slyfox@gentoo.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> Reviewed-by: Cheng Jian <cj.chengjian@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/ia64/kernel/acpi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index a5636524af76..e2af6b172200 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -446,7 +446,8 @@ void __init acpi_numa_fixup(void) if (srat_num_cpus == 0) { node_set_online(0); node_cpuid[0].phys_id = hard_smp_processor_id(); - return; + slit_distance(0, 0) = LOCAL_DISTANCE; + goto out; } /* @@ -489,7 +490,7 @@ void __init acpi_numa_fixup(void) for (j = 0; j < MAX_NUMNODES; j++) slit_distance(i, j) = i == j ? LOCAL_DISTANCE : REMOTE_DISTANCE; - return; + goto out; } memset(numa_slit, -1, sizeof(numa_slit)); @@ -514,6 +515,8 @@ void __init acpi_numa_fixup(void) printk("\n"); } #endif +out: + node_possible_map = node_online_map; } #endif /* CONFIG_ACPI_NUMA */ -- 2.20.1

From: Laibin Qiu <qiulaibin@huawei.com> hulk inclusion category: bugfix bugzilla: 181879 https://gitee.com/openeuler/kernel/issues/I4DDEL -------------------------- KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000 [693354.108278] page dumped because: kasan: bad access detected [693354.108511] Memory state around the buggy address: [693354.108671] ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [693354.116396] ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.132421] ^ [693354.140284] ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.147912] ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [693354.155281] ================================================================== blkgs are protected by both queue and blkcg locks and holding either should stabilize them. However, the path of destroying blkg policy data is only protected by queue lock in blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks can get the blkg policy data before the blkg policy data is destroyed, and use it after destroyed, which will result in a use-after-free. CPU0 CPU1 blkcg_deactivate_policy spin_lock_irq(&q->queue_lock) bfq_io_set_weight_legacy spin_lock_irq(&blkcg->lock) blkg_to_bfqg(blkg) pd_to_bfqg(blkg->pd[pol->plid]) ^^^^^^blkg->pd[pol->plid] != NULL bfqg != NULL pol->pd_free_fn(blkg->pd[pol->plid]) pd_to_bfqg(blkg->pd[pol->plid]) bfqg_put(bfqg) kfree(bfqg) blkg->pd[pol->plid] = NULL spin_unlock_irq(q->queue_lock); bfq_group_set_weight(bfqg, val, 0) bfqg->entity.new_weight ^^^^^^trigger uaf here spin_unlock_irq(&blkcg->lock); Fix by garbbing the matching blkcg lock before trying to destroy blkg policy data. Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Link: https://lore.kernel.org/linux-block/YUDLt9uBNLhWL6Gt@slm.duckdns.org/T/#r07c... Conflicts: block/blk-cgroup.c Signed-off-by: Laibin Qiu <qiulaibin@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- block/blk-cgroup.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index f13688c4b931..5b19665bc486 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -1387,10 +1387,14 @@ int blkcg_activate_policy(struct request_queue *q, /* alloc failed, nothing's initialized yet, free everything */ spin_lock_irq(&q->queue_lock); list_for_each_entry(blkg, &q->blkg_list, q_node) { + struct blkcg *blkcg = blkg->blkcg; + + spin_lock(&blkcg->lock); if (blkg->pd[pol->plid]) { pol->pd_free_fn(blkg->pd[pol->plid]); blkg->pd[pol->plid] = NULL; } + spin_unlock(&blkcg->lock); } spin_unlock_irq(&q->queue_lock); ret = -ENOMEM; @@ -1422,12 +1426,16 @@ void blkcg_deactivate_policy(struct request_queue *q, __clear_bit(pol->plid, q->blkcg_pols); list_for_each_entry(blkg, &q->blkg_list, q_node) { + struct blkcg *blkcg = blkg->blkcg; + + spin_lock(&blkcg->lock); if (blkg->pd[pol->plid]) { if (pol->pd_offline_fn) pol->pd_offline_fn(blkg->pd[pol->plid]); pol->pd_free_fn(blkg->pd[pol->plid]); blkg->pd[pol->plid] = NULL; } + spin_unlock(&blkcg->lock); } spin_unlock_irq(&q->queue_lock); -- 2.20.1

From: yangerkun <yangerkun@huawei.com> hulk inclusion category: bugfix bugzilla: 172156 https://gitee.com/openeuler/kernel/issues/I4DDEL --------------------------- ramfs_parse_param does not parse key "source", and will convert -ENOPARAM to 0. This will skip vfs_parse_fs_param_source in vfs_parse_fs_param, which lead always "none" mount source for ramfs. Fix it by parse "source" in ramfs_parse_param like cgroup1_parse_param has do. Link: https://lkml.kernel.org/r/20210924091756.1906118-1-yangerkun@huawei.com Signed-off-by: yangerkun <yangerkun@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/ramfs/inode.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c index ee179a81b3da..0163dcff9318 100644 --- a/fs/ramfs/inode.c +++ b/fs/ramfs/inode.c @@ -193,17 +193,20 @@ static int ramfs_parse_param(struct fs_context *fc, struct fs_parameter *param) int opt; opt = fs_parse(fc, ramfs_fs_parameters, param, &result); - if (opt < 0) { + if (opt == -ENOPARAM) { + opt = vfs_parse_fs_param_source(fc, param); + if (opt != -ENOPARAM) + return opt; /* * We might like to report bad mount options here; * but traditionally ramfs has ignored all mount options, * and as it is used as a !CONFIG_SHMEM simple substitute * for tmpfs, better continue to ignore other mount options. */ - if (opt == -ENOPARAM) - opt = 0; - return opt; + return 0; } + if (opt < 0) + return opt; switch (opt) { case Opt_mode: -- 2.20.1

From: Zhang Yi <yi.zhang@huawei.com> mainline inclusion from mainline-5.15-rc4 commit 4df031ff5876d94b48dd9ee486ba5522382a06b2 category: perf bugzilla: 182881 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... --------------------------- After commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize"), i_disksize could always be updated to i_size in ext4_setattr(), and we could sure that i_disksize <= i_size since holding inode lock and if i_disksize < i_size there are delalloc writes pending in the range upto i_size. If the end of the current write is <= i_size, there's no need to touch i_disksize since writeback will push i_disksize upto i_size eventually. So we can switch to check i_size instead of i_disksize in ext4_da_write_end() when write to the end of the file. we also could remove ext4_mark_inode_dirty() together because we defer inode dirtying to generic_write_end() or ext4_da_write_inline_data_end(). Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com Reviewed-by: Yang Erkun <yangerkun@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/ext4/inode.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a054f07a63a6..558e0d8dd526 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3088,35 +3088,37 @@ static int ext4_da_write_end(struct file *file, end = start + copied - 1; /* - * generic_write_end() will run mark_inode_dirty() if i_size - * changes. So let's piggyback the i_disksize mark_inode_dirty - * into that. + * Since we are holding inode lock, we are sure i_disksize <= + * i_size. We also know that if i_disksize < i_size, there are + * delalloc writes pending in the range upto i_size. If the end of + * the current write is <= i_size, there's no need to touch + * i_disksize since writeback will push i_disksize upto i_size + * eventually. If the end of the current write is > i_size and + * inside an allocated block (ext4_da_should_update_i_disksize() + * check), we need to update i_disksize here as neither + * ext4_writepage() nor certain ext4_writepages() paths not + * allocating blocks update i_disksize. + * + * Note that we defer inode dirtying to generic_write_end() / + * ext4_da_write_inline_data_end(). */ new_i_size = pos + copied; - if (copied && new_i_size > EXT4_I(inode)->i_disksize) { + if (copied && new_i_size > inode->i_size) { if (ext4_has_inline_data(inode) || - ext4_da_should_update_i_disksize(page, end)) { + ext4_da_should_update_i_disksize(page, end)) ext4_update_i_disksize(inode, new_i_size); - /* We need to mark inode dirty even if - * new_i_size is less that inode->i_size - * bu greater than i_disksize.(hint delalloc) - */ - ret = ext4_mark_inode_dirty(handle, inode); - } } if (write_mode != CONVERT_INLINE_DATA && ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && ext4_has_inline_data(inode)) - ret2 = ext4_da_write_inline_data_end(inode, pos, len, copied, + ret = ext4_da_write_inline_data_end(inode, pos, len, copied, page); else - ret2 = generic_write_end(file, mapping, pos, len, copied, + ret = generic_write_end(file, mapping, pos, len, copied, page, fsdata); - copied = ret2; - if (ret2 < 0) - ret = ret2; + copied = ret; ret2 = ext4_journal_stop(handle); if (unlikely(ret2 && !ret)) ret = ret2; -- 2.20.1

From: Zhang Yi <yi.zhang@huawei.com> mainline inclusion from mainline-5.15-rc4 commit 6984aef59814fb5c47b0e30c56e101186b5ebf8c category: perf bugzilla: 182881 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... --------------------------- Now that the inline_data file write end procedure are falled into the common write end functions, it is not clear. Factor them out and do some cleanup. This patch also drop ext4_da_write_inline_data_end() and switch to use ext4_write_inline_data_end() instead because we also need to do the same error processing if we failed to write data into inline entry. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210716122024.1105856-4-yi.zhang@huawei.com Conflicts: fs/ext4/inline.c Reviewed-by: Yang Erkun <yangerkun@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- fs/ext4/ext4.h | 3 -- fs/ext4/inline.c | 128 +++++++++++++++++++++++++---------------------- fs/ext4/inode.c | 73 +++++++++------------------ 3 files changed, 90 insertions(+), 114 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index c859ec4544bc..bb3adca53d93 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -3437,9 +3437,6 @@ extern int ext4_da_write_inline_data_begin(struct address_space *mapping, unsigned flags, struct page **pagep, void **fsdata); -extern int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, - unsigned len, unsigned copied, - struct page *page); extern int ext4_try_add_inline_entry(handle_t *handle, struct ext4_filename *fname, struct inode *dir, struct inode *inode); diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index a96b688a0410..cb42b2245c21 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -729,40 +729,83 @@ int ext4_try_to_write_inline_data(struct address_space *mapping, int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, unsigned copied, struct page *page) { - int ret, no_expand; + handle_t *handle = ext4_journal_current_handle(); + int no_expand; void *kaddr; struct ext4_iloc iloc; + int ret = 0, ret2; if (unlikely(copied < len) && !PageUptodate(page)) - return 0; + copied = 0; - ret = ext4_get_inode_loc(inode, &iloc); - if (ret) { - ext4_std_error(inode->i_sb, ret); - return ret; - } + if (likely(copied)) { + ret = ext4_get_inode_loc(inode, &iloc); + if (ret) { + unlock_page(page); + put_page(page); + ext4_std_error(inode->i_sb, ret); + goto out; + } + ext4_write_lock_xattr(inode, &no_expand); + BUG_ON(!ext4_has_inline_data(inode)); - ext4_write_lock_xattr(inode, &no_expand); - BUG_ON(!ext4_has_inline_data(inode)); + /* + * ei->i_inline_off may have changed since + * ext4_write_begin() called + * ext4_try_to_write_inline_data() + */ + (void) ext4_find_inline_data_nolock(inode); - /* - * ei->i_inline_off may have changed since ext4_write_begin() - * called ext4_try_to_write_inline_data() - */ - (void) ext4_find_inline_data_nolock(inode); + kaddr = kmap_atomic(page); + ext4_write_inline_data(inode, &iloc, kaddr, pos, copied); + kunmap_atomic(kaddr); + SetPageUptodate(page); + /* clear page dirty so that writepages wouldn't work for us. */ + ClearPageDirty(page); - kaddr = kmap_atomic(page); - ext4_write_inline_data(inode, &iloc, kaddr, pos, copied); - kunmap_atomic(kaddr); - SetPageUptodate(page); - /* clear page dirty so that writepages wouldn't work for us. */ - ClearPageDirty(page); + ext4_write_unlock_xattr(inode, &no_expand); + brelse(iloc.bh); - ext4_write_unlock_xattr(inode, &no_expand); - brelse(iloc.bh); - mark_inode_dirty(inode); + /* + * It's important to update i_size while still holding page + * lock: page writeout could otherwise come in and zero + * beyond i_size. + */ + ext4_update_inode_size(inode, pos + copied); + } + unlock_page(page); + put_page(page); + + /* + * Don't mark the inode dirty under page lock. First, it unnecessarily + * makes the holding time of page lock longer. Second, it forces lock + * ordering of page lock and transaction start for journaling + * filesystems. + */ + if (likely(copied)) + mark_inode_dirty(inode); +out: + /* + * If we didn't copy as much data as expected, we need to trim back + * size of xattr containing inline data. + */ + if (pos + len > inode->i_size && ext4_can_truncate(inode)) + ext4_orphan_add(handle, inode); - return copied; + ret2 = ext4_journal_stop(handle); + if (!ret) + ret = ret2; + if (pos + len > inode->i_size) { + ext4_truncate_failed_write(inode); + /* + * If truncate failed early the inode might still be + * on the orphan list; we need to make sure the inode + * is removed from the orphan list in that case. + */ + if (inode->i_nlink) + ext4_orphan_del(NULL, inode); + } + return ret ? ret : copied; } struct buffer_head * @@ -943,43 +986,6 @@ int ext4_da_write_inline_data_begin(struct address_space *mapping, return ret; } -int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, - unsigned len, unsigned copied, - struct page *page) -{ - int ret; - - ret = ext4_write_inline_data_end(inode, pos, len, copied, page); - if (ret < 0) { - unlock_page(page); - put_page(page); - return ret; - } - copied = ret; - - /* - * No need to use i_size_read() here, the i_size - * cannot change under us because we hold i_mutex. - * - * But it's important to update i_size while still holding page lock: - * page writeout could otherwise come in and zero beyond i_size. - */ - if (pos+copied > inode->i_size) - i_size_write(inode, pos+copied); - unlock_page(page); - put_page(page); - - /* - * Don't mark the inode dirty under page lock. First, it unnecessarily - * makes the holding time of page lock longer. Second, it forces lock - * ordering of page lock and transaction start for journaling - * filesystems. - */ - mark_inode_dirty(inode); - - return copied; -} - #ifdef INLINE_DIR_DEBUG void ext4_show_inline_dir(struct inode *dir, struct buffer_head *bh, void *inline_start, int inline_size) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index d9b20649dc23..49926b9c52cb 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1286,23 +1286,14 @@ static int ext4_write_end(struct file *file, loff_t old_size = inode->i_size; int ret = 0, ret2; int i_size_changed = 0; - int inline_data = ext4_has_inline_data(inode); bool verity = ext4_verity_in_progress(inode); trace_ext4_write_end(inode, pos, len, copied); - if (inline_data) { - ret = ext4_write_inline_data_end(inode, pos, len, - copied, page); - if (ret < 0) { - unlock_page(page); - put_page(page); - goto errout; - } - copied = ret; - ret = 0; - } else - copied = block_write_end(file, mapping, pos, - len, copied, page, fsdata); + + if (ext4_has_inline_data(inode)) + return ext4_write_inline_data_end(inode, pos, len, copied, page); + + copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); /* * it's important to update i_size while still holding page lock: * page writeout could otherwise come in and zero beyond i_size. @@ -1323,10 +1314,9 @@ static int ext4_write_end(struct file *file, * ordering of page lock and transaction start for journaling * filesystems. */ - if (i_size_changed || inline_data) + if (i_size_changed) ret = ext4_mark_inode_dirty(handle, inode); -errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside @@ -1398,7 +1388,6 @@ static int ext4_journalled_write_end(struct file *file, int partial = 0; unsigned from, to; int size_changed = 0; - int inline_data = ext4_has_inline_data(inode); bool verity = ext4_verity_in_progress(inode); trace_ext4_journalled_write_end(inode, pos, len, copied); @@ -1407,17 +1396,10 @@ static int ext4_journalled_write_end(struct file *file, BUG_ON(!ext4_handle_valid(handle)); - if (inline_data) { - ret = ext4_write_inline_data_end(inode, pos, len, - copied, page); - if (ret < 0) { - unlock_page(page); - put_page(page); - goto errout; - } - copied = ret; - ret = 0; - } else if (unlikely(copied < len) && !PageUptodate(page)) { + if (ext4_has_inline_data(inode)) + return ext4_write_inline_data_end(inode, pos, len, copied, page); + + if (unlikely(copied < len) && !PageUptodate(page)) { copied = 0; ext4_journalled_zero_new_buffers(handle, page, from, to); } else { @@ -1440,13 +1422,12 @@ static int ext4_journalled_write_end(struct file *file, if (old_size < pos && !verity) pagecache_isize_extended(inode, old_size, pos); - if (size_changed || inline_data) { + if (size_changed) { ret2 = ext4_mark_inode_dirty(handle, inode); if (!ret) ret = ret2; } -errout: if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode)) /* if we have allocated more blocks and copied * less. We will have blocks allocated outside @@ -3076,7 +3057,7 @@ static int ext4_da_write_end(struct file *file, struct page *page, void *fsdata) { struct inode *inode = mapping->host; - int ret = 0, ret2; + int ret; handle_t *handle = ext4_journal_current_handle(); loff_t new_i_size; unsigned long start, end; @@ -3087,6 +3068,12 @@ static int ext4_da_write_end(struct file *file, len, copied, page, fsdata); trace_ext4_da_write_end(inode, pos, len, copied); + + if (write_mode != CONVERT_INLINE_DATA && + ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && + ext4_has_inline_data(inode)) + return ext4_write_inline_data_end(inode, pos, len, copied, page); + start = pos & (PAGE_SIZE - 1); end = start + copied - 1; @@ -3106,26 +3093,12 @@ static int ext4_da_write_end(struct file *file, * ext4_da_write_inline_data_end(). */ new_i_size = pos + copied; - if (copied && new_i_size > inode->i_size) { - if (ext4_has_inline_data(inode) || - ext4_da_should_update_i_disksize(page, end)) - ext4_update_i_disksize(inode, new_i_size); - } - - if (write_mode != CONVERT_INLINE_DATA && - ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) && - ext4_has_inline_data(inode)) - ret = ext4_da_write_inline_data_end(inode, pos, len, copied, - page); - else - ret = generic_write_end(file, mapping, pos, len, copied, - page, fsdata); - - copied = ret; - ret2 = ext4_journal_stop(handle); - if (unlikely(ret2 && !ret)) - ret = ret2; + if (copied && new_i_size > inode->i_size && + ext4_da_should_update_i_disksize(page, end)) + ext4_update_i_disksize(inode, new_i_size); + copied = generic_write_end(file, mapping, pos, len, copied, page, fsdata); + ret = ext4_journal_stop(handle); return ret ? ret : copied; } -- 2.20.1

From: Zhihao Cheng <chengzhihao1@huawei.com> mainline inclusion from mainline-5.15-rc3 commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 category: bugfix bugzilla: 181454 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... --------------------------- There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a896154119f ("blktrace: add ftrace plugin") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- kernel/trace/blktrace.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index f1022945e346..b89ff188a618 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1670,6 +1670,14 @@ static int blk_trace_remove_queue(struct request_queue *q) if (bt == NULL) return -EINVAL; + if (bt->trace_state == Blktrace_running) { + bt->trace_state = Blktrace_stopped; + spin_lock_irq(&running_trace_lock); + list_del_init(&bt->running_list); + spin_unlock_irq(&running_trace_lock); + relay_flush(bt->rchan); + } + put_probe_ref(); synchronize_rcu(); blk_trace_free(bt); -- 2.20.1

From: Srikar Dronamraju <srikar@linux.vnet.ibm.com> mainline inclusion from mainline-v5.15-rc1 commit 9a245d0e1f006bc7ccf0285d0d520ed304d00c4a category: bugfix bugzilla: 180732 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... --------------------------- cpu_cpu_map holds all the CPUs in the DIE. However in PowerPC, when onlining/offlining of CPUs, this mask doesn't get updated. This mask is however updated when CPUs are added/removed. So when both operations like online/offline of CPUs and adding/removing of CPUs are done simultaneously, then cpumaps end up broken. WARNING: CPU: 13 PID: 1142 at kernel/sched/topology.c:898 build_sched_domains+0xd48/0x1720 Modules linked in: rpadlpar_io rpaphp mptcp_diag xsk_diag tcp_diag udp_diag raw_diag inet_diag unix_diag af_packet_diag netlink_diag bonding tls nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set rfkill nf_tables nfnetlink pseries_rng xts vmx_crypto uio_pdrv_genirq uio binfmt_misc ip_tables xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 13 PID: 1142 Comm: kworker/13:2 Not tainted 5.13.0-rc6+ #28 Workqueue: events cpuset_hotplug_workfn NIP: c0000000001caac8 LR: c0000000001caac4 CTR: 00000000007088ec REGS: c00000005596f220 TRAP: 0700 Not tainted (5.13.0-rc6+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48828222 XER: 00000009 CFAR: c0000000001ea698 IRQMASK: 0 GPR00: c0000000001caac4 c00000005596f4c0 c000000001c4a400 0000000000000036 GPR04: 00000000fffdffff c00000005596f1d0 0000000000000027 c0000018cfd07f90 GPR08: 0000000000000023 0000000000000001 0000000000000027 c0000018fe68ffe8 GPR12: 0000000000008000 c00000001e9d1880 c00000013a047200 0000000000000800 GPR16: c000000001d3c7d0 0000000000000240 0000000000000048 c000000010aacd18 GPR20: 0000000000000001 c000000010aacc18 c00000013a047c00 c000000139ec2400 GPR24: 0000000000000280 c000000139ec2520 c000000136c1b400 c000000001c93060 GPR28: c00000013a047c20 c000000001d3c6c0 c000000001c978a0 000000000000000d NIP [c0000000001caac8] build_sched_domains+0xd48/0x1720 LR [c0000000001caac4] build_sched_domains+0xd44/0x1720 Call Trace: [c00000005596f4c0] [c0000000001caac4] build_sched_domains+0xd44/0x1720 (unreliable) [c00000005596f670] [c0000000001cc5ec] partition_sched_domains_locked+0x3ac/0x4b0 [c00000005596f710] [c0000000002804e4] rebuild_sched_domains_locked+0x404/0x9e0 [c00000005596f810] [c000000000283e60] rebuild_sched_domains+0x40/0x70 [c00000005596f840] [c000000000284124] cpuset_hotplug_workfn+0x294/0xf10 [c00000005596fc60] [c000000000175040] process_one_work+0x290/0x590 [c00000005596fd00] [c0000000001753c8] worker_thread+0x88/0x620 [c00000005596fda0] [c000000000181704] kthread+0x194/0x1a0 [c00000005596fe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70 Instruction dump: 485af049 60000000 2fa30800 409e0028 80fe0000 e89a00f8 e86100e8 38da0120 7f88e378 7ce53b78 4801fb91 60000000 <0fe00000> 39000000 38e00000 38c00000 Fix this by updating cpu_cpu_map aka cpumask_of_node() on every CPU online/offline. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210826100521.412639-5-srikar@linux.vnet.ibm.com Signed-off-by: Chen Lifu <chenlifu@huawei.com> Reviewed-by: Zhang Jianhua <chris.zjh@huawei.com> Reviewed-by: Linruizhe <linruizhe@huawei.com> Reviewed-by: He Ying <heying24@huawei.com> Reviewed-by: Yihang Xu <xuyihang@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/powerpc/include/asm/topology.h | 13 +++++++++++++ arch/powerpc/kernel/smp.c | 3 +++ arch/powerpc/mm/numa.c | 7 ++----- 3 files changed, 18 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 3beeb030cd78..424635b24b52 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -65,6 +65,11 @@ static inline int early_cpu_to_node(int cpu) int of_drconf_to_nid_single(struct drmem_lmb *lmb); +extern void map_cpu_to_node(int cpu, int node); +#ifdef CONFIG_HOTPLUG_CPU +extern void unmap_cpu_from_node(unsigned long cpu); +#endif /* CONFIG_HOTPLUG_CPU */ + #else static inline int early_cpu_to_node(int cpu) { return 0; } @@ -93,6 +98,14 @@ static inline int of_drconf_to_nid_single(struct drmem_lmb *lmb) return first_online_node; } + +#ifdef CONFIG_SMP +static inline void map_cpu_to_node(int cpu, int node) {} +#ifdef CONFIG_HOTPLUG_CPU +static inline void unmap_cpu_from_node(unsigned long cpu) {} +#endif /* CONFIG_HOTPLUG_CPU */ +#endif /* CONFIG_SMP */ + #endif /* CONFIG_NUMA */ #if defined(CONFIG_NUMA) && defined(CONFIG_PPC_SPLPAR) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 91f274134884..ea6b03f19789 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -1300,6 +1300,8 @@ static void remove_cpu_from_masks(int cpu) struct cpumask *(*mask_fn)(int) = cpu_sibling_mask; int i; + unmap_cpu_from_node(cpu); + if (shared_caches) mask_fn = cpu_l2_cache_mask; @@ -1384,6 +1386,7 @@ static void add_cpu_to_masks(int cpu) * This CPU will not be in the online mask yet so we need to manually * add it to it's own thread sibling mask. */ + map_cpu_to_node(cpu, cpu_to_node(cpu)); cpumask_set_cpu(cpu, cpu_sibling_mask(cpu)); cpumask_set_cpu(cpu, cpu_core_mask(cpu)); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 094a1076fd1f..23bfe00811ae 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -137,7 +137,7 @@ static void reset_numa_cpu_lookup_table(void) numa_cpu_lookup_table[cpu] = -1; } -static void map_cpu_to_node(int cpu, int node) +void map_cpu_to_node(int cpu, int node) { update_numa_cpu_lookup_table(cpu, node); @@ -148,7 +148,7 @@ static void map_cpu_to_node(int cpu, int node) } #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PPC_SPLPAR) -static void unmap_cpu_from_node(unsigned long cpu) +void unmap_cpu_from_node(unsigned long cpu) { int node = numa_cpu_lookup_table[cpu]; @@ -598,9 +598,6 @@ static int ppc_numa_cpu_prepare(unsigned int cpu) static int ppc_numa_cpu_dead(unsigned int cpu) { -#ifdef CONFIG_HOTPLUG_CPU - unmap_cpu_from_node(cpu); -#endif return 0; } -- 2.20.1

From: Baolin Wang <baolin.wang@linux.alibaba.com> mainline inclusion from mainline-5.15-rc1 commit 37bc3cb9bbef86d1ddbbc789e55b588c8a2cac26 category: bugfix bugzilla: 180690 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- Since commit c843966c556d ("mm: allow swappiness that prefers reclaiming anon over the file workingset") has expended the swappiness value to make swap to be preferred in some systems. We should also change the memcg swappiness restriction to allow memcg swap-preferred. Link: https://lkml.kernel.org/r/d77469b90c45c49953ccbc51e54a1d465bc18f70.162762625... Fixes: c843966c556d ("mm: allow swappiness that prefers reclaiming anon over the file workingset") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Conflicts: mm/memcontrol.c Signed-off-by: Lu Jialin <lujialin4@huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- mm/memcontrol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 314f3dcba6a6..a2a04a990e09 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4282,7 +4282,7 @@ static int mem_cgroup_swappiness_write(struct cgroup_subsys_state *css, { struct mem_cgroup *memcg = mem_cgroup_from_css(css); - if (val > 100) + if (val > 200) return -EINVAL; if (css->parent) -- 2.20.1

From: Dan Carpenter <dan.carpenter@oracle.com> maillist inclusion category: bugfix bugzilla: 182946 https://gitee.com/openeuler/kernel/issues/I4DDEL CVE: CVE-2021-42739 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... --------------------------- The bounds checking in avc_ca_pmt() is not strict enough. It should be checking "read_pos + 4" because it's reading 5 bytes. If the "es_info_length" is non-zero then it reads a 6th byte so there needs to be an additional check for that. I also added checks for the "write_pos". I don't think these are required because "read_pos" and "write_pos" are tied together so checking one ought to be enough. But they make the code easier to understand for me. The check on write_pos is: if (write_pos + 4 >= sizeof(c->operand) - 4) { The first "+ 4" is because we're writing 5 bytes and the last " - 4" is to leave space for the CRC. The other problem is that "length" can be invalid. It comes from "data_length" in fdtv_ca_pmt(). Cc: stable@vger.kernel.org Reported-by: Luo Likang <luolikang@nsfocus.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Xiu Jianfeng <xiujianfeng@huawei.com> Reviewed-by: Weiyang Wang <wangweiyang2@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/media/firewire/firedtv-avc.c | 14 +++++++++++--- drivers/media/firewire/firedtv-ci.c | 2 ++ 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/media/firewire/firedtv-avc.c b/drivers/media/firewire/firedtv-avc.c index 2bf9467b917d..71991f8638e6 100644 --- a/drivers/media/firewire/firedtv-avc.c +++ b/drivers/media/firewire/firedtv-avc.c @@ -1165,7 +1165,11 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) read_pos += program_info_length; write_pos += program_info_length; } - while (read_pos < length) { + while (read_pos + 4 < length) { + if (write_pos + 4 >= sizeof(c->operand) - 4) { + ret = -EINVAL; + goto out; + } c->operand[write_pos++] = msg[read_pos++]; c->operand[write_pos++] = msg[read_pos++]; c->operand[write_pos++] = msg[read_pos++]; @@ -1177,13 +1181,17 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) c->operand[write_pos++] = es_info_length >> 8; c->operand[write_pos++] = es_info_length & 0xff; if (es_info_length > 0) { + if (read_pos >= length) { + ret = -EINVAL; + goto out; + } pmt_cmd_id = msg[read_pos++]; if (pmt_cmd_id != 1 && pmt_cmd_id != 4) dev_err(fdtv->device, "invalid pmt_cmd_id %d at stream level\n", pmt_cmd_id); - if (es_info_length > sizeof(c->operand) - 4 - - write_pos) { + if (es_info_length > sizeof(c->operand) - 4 - write_pos || + es_info_length > length - read_pos) { ret = -EINVAL; goto out; } diff --git a/drivers/media/firewire/firedtv-ci.c b/drivers/media/firewire/firedtv-ci.c index 9363d005e2b6..e0d57e09dab0 100644 --- a/drivers/media/firewire/firedtv-ci.c +++ b/drivers/media/firewire/firedtv-ci.c @@ -134,6 +134,8 @@ static int fdtv_ca_pmt(struct firedtv *fdtv, void *arg) } else { data_length = msg->msg[3]; } + if (data_length > sizeof(msg->msg) - data_pos) + return -EINVAL; return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length); } -- 2.20.1