From: Mathias Nyman <mathias.nyman@linux.intel.com> stable inclusion from stable-v5.10.268 commit 89ed7ebae4f04d05678108a2141b7ddaea7f9355 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9DNQ5 CVE: CVE-2024-26659 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 55f6153d8cc8eff0852d108f80087fdf41dc2169 ] When finishing a TD we walk the endpoint dequeue trb pointer until it matches the last TRB of the TD. TDs can contain over 100 TRBs, meaning we call a function 100 times, do a few comparisons and increase a couple values for each of these calls, all in interrupt context. This can all be avoided by adding a pointer to the last TRB segment, and a number of TRBs in the TD. So instead of walking through each TRB just set the new dequeue segment, pointer, and number of free TRBs directly. Getting rid of the while loop also reduces the risk of getting stuck in a infinite loop in the interrupt handler. Loop relied on valid matching dequeue and last_trb values to break. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210129130044.206855-12-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 5372c65e1311 ("xhci: process isoc TD properly when there was a transaction error mid TD.") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> --- drivers/usb/host/xhci-ring.c | 21 ++++++++++++++------- drivers/usb/host/xhci.h | 2 ++ 2 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index e7e93b8b9679..0991a6d2b95d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2106,8 +2106,9 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, EP_HARD_RESET); } else { /* Update ring dequeue pointer */ - while (ep_ring->dequeue != td->last_trb) - inc_deq(xhci, ep_ring); + ep_ring->dequeue = td->last_trb; + ep_ring->deq_seg = td->last_trb_seg; + ep_ring->num_trbs_free += td->num_trbs - 1; inc_deq(xhci, ep_ring); } @@ -2328,8 +2329,9 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, frame->actual_length = 0; /* Update ring dequeue pointer */ - while (ep->ring->dequeue != td->last_trb) - inc_deq(xhci, ep->ring); + ep->ring->dequeue = td->last_trb; + ep->ring->deq_seg = td->last_trb_seg; + ep->ring->num_trbs_free += td->num_trbs - 1; inc_deq(xhci, ep->ring); return xhci_td_cleanup(xhci, td, ep->ring, status); @@ -3494,7 +3496,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field |= TRB_IOC; more_trbs_coming = false; td->last_trb = ring->enqueue; - + td->last_trb_seg = ring->enq_seg; if (xhci_urb_suitable_for_idt(urb)) { memcpy(&send_addr, urb->transfer_buffer, trb_buff_len); @@ -3520,7 +3522,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, upper_32_bits(send_addr), length_field, field); - + td->num_trbs++; addr += trb_buff_len; sent_len = trb_buff_len; @@ -3544,8 +3546,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, ep_index, urb->stream_id, 1, urb, 1, mem_flags); urb_priv->td[1].last_trb = ring->enqueue; + urb_priv->td[1].last_trb_seg = ring->enq_seg; field = TRB_TYPE(TRB_NORMAL) | ring->cycle_state | TRB_IOC; queue_trb(xhci, ring, 0, 0, 0, TRB_INTR_TARGET(0), field); + urb_priv->td[1].num_trbs++; } check_trb_math(urb, enqd_len); @@ -3596,6 +3600,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, urb_priv = urb->hcpriv; td = &urb_priv->td[0]; + td->num_trbs = num_trbs; /* * Don't give the first TRB to the hardware (by toggling the cycle bit) @@ -3668,6 +3673,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Save the DMA address of the last TRB in the TD */ td->last_trb = ep_ring->enqueue; + td->last_trb_seg = ep_ring->enq_seg; /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */ /* If the device sent data, the status stage is an OUT transfer */ @@ -3912,7 +3918,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, goto cleanup; } td = &urb_priv->td[i]; - + td->num_trbs = trbs_per_td; /* use SIA as default, if frame id is used overwrite it */ sia_frame_id = TRB_SIA; if (!(urb->transfer_flags & URB_ISO_ASAP) && @@ -3955,6 +3961,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } else { more_trbs_coming = false; td->last_trb = ep_ring->enqueue; + td->last_trb_seg = ep_ring->enq_seg; field |= TRB_IOC; if (trb_block_event_intr(xhci, num_tds, i)) field |= TRB_BEI; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 03478edb1179..00055e6e1ad2 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1550,9 +1550,11 @@ struct xhci_td { struct xhci_segment *start_seg; union xhci_trb *first_trb; union xhci_trb *last_trb; + struct xhci_segment *last_trb_seg; struct xhci_segment *bounce_seg; /* actual_length of the URB has already been set */ bool urb_length_set; + unsigned int num_trbs; }; /* xHCI command default timeout value */ -- 2.25.1

From: Mathias Nyman <mathias.nyman@linux.intel.com> stable inclusion from stable-v5.10.268 commit fe2322caa07424b31522761c27f8b299e87a37a9 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9DNQ5 CVE: CVE-2024-26659 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 5372c65e1311a16351ef03dd096ff576e6477674 ] The last TRB of a isoc TD might not trigger an event if there was an error event for a TRB mid TD. This is seen on a NEC Corporation uPD720200 USB 3.0 Host After an error mid a multi-TRB TD the xHC should according to xhci 4.9.1 generate events for passed TRBs with IOC flag set if it proceeds to the next TD. This event is either a copy of the original error, or a "success" transfer event. If that event is missing then the driver and xHC host get out of sync as the driver is still expecting a transfer event for that first TD, while xHC host is already sending events for the next TD in the list. This leads to "Transfer event TRB DMA ptr not part of current TD" messages. As a solution we tag the isoc TDs that get error events mid TD. If an event doesn't match the first TD, then check if the tag is set, and event points to the next TD. In that case give back the fist TD and process the next TD normally Make sure TD status and transferred length stay valid in both cases with and without final TD completion event. Reported-by: Michał Pecio <michal.pecio@gmail.com> Closes: https://lore.kernel.org/linux-usb/20240112235205.1259f60c@foxbook/ Tested-by: Michał Pecio <michal.pecio@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240125152737.2983959-4-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> --- drivers/usb/host/xhci-ring.c | 74 +++++++++++++++++++++++++++++------- drivers/usb/host/xhci.h | 1 + 2 files changed, 61 insertions(+), 14 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 8547e21567da..5d152f98e3f5 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2251,6 +2251,9 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, /* handle completion code */ switch (trb_comp_code) { case COMP_SUCCESS: + /* Don't overwrite status if TD had an error, see xHCI 4.9.1 */ + if (td->error_mid_td) + break; if (remaining) { frame->status = short_framestatus; if (xhci->quirks & XHCI_TRUST_TX_LENGTH) @@ -2276,8 +2279,9 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, break; case COMP_USB_TRANSACTION_ERROR: frame->status = -EPROTO; + sum_trbs_for_length = true; if (ep_trb != td->last_trb) - return 0; + td->error_mid_td = true; break; case COMP_STOPPED: sum_trbs_for_length = true; @@ -2297,6 +2301,9 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, break; } + if (td->urb_length_set) + goto finish_td; + if (sum_trbs_for_length) frame->actual_length = sum_trb_lengths(xhci, ep->ring, ep_trb) + ep_trb_len - remaining; @@ -2305,6 +2312,14 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, td->urb->actual_length += frame->actual_length; +finish_td: + /* Don't give back TD yet if we encountered an error mid TD */ + if (td->error_mid_td && ep_trb != td->last_trb) { + xhci_dbg(xhci, "Error mid isoc TD, wait for final completion event\n"); + td->urb_length_set = true; + return 0; + } + return finish_td(xhci, ep, ep_ring, td, trb_comp_code); } @@ -2691,17 +2706,51 @@ static int handle_tx_event(struct xhci_hcd *xhci, } if (!ep_seg) { - if (!ep->skip || - !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) { - /* Some host controllers give a spurious - * successful event after a short transfer. - * Ignore it. - */ - if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && - ep_ring->last_td_was_short) { - ep_ring->last_td_was_short = false; - goto cleanup; + + if (ep->skip && usb_endpoint_xfer_isoc(&td->urb->ep->desc)) { + skip_isoc_td(xhci, td, ep, status); + goto cleanup; + } + + /* + * Some hosts give a spurious success event after a short + * transfer. Ignore it. + */ + if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && + ep_ring->last_td_was_short) { + ep_ring->last_td_was_short = false; + goto cleanup; + } + + /* + * xhci 4.10.2 states isoc endpoints should continue + * processing the next TD if there was an error mid TD. + * So host like NEC don't generate an event for the last + * isoc TRB even if the IOC flag is set. + * xhci 4.9.1 states that if there are errors in mult-TRB + * TDs xHC should generate an error for that TRB, and if xHC + * proceeds to the next TD it should genete an event for + * any TRB with IOC flag on the way. Other host follow this. + * So this event might be for the next TD. + */ + if (td->error_mid_td && + !list_is_last(&td->td_list, &ep_ring->td_list)) { + struct xhci_td *td_next = list_next_entry(td, td_list); + + ep_seg = trb_in_td(xhci, td_next->start_seg, td_next->first_trb, + td_next->last_trb, ep_trb_dma, false); + if (ep_seg) { + /* give back previous TD, start handling new */ + xhci_dbg(xhci, "Missing TD completion event after mid TD error\n"); + ep_ring->dequeue = td->last_trb; + ep_ring->deq_seg = td->last_trb_seg; + inc_deq(xhci, ep_ring); + xhci_td_cleanup(xhci, td, ep_ring, td->status); + td = td_next; } + } + + if (!ep_seg) { /* HC is busted, give up! */ xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not " @@ -2713,9 +2762,6 @@ static int handle_tx_event(struct xhci_hcd *xhci, ep_trb_dma, true); return -ESHUTDOWN; } - - skip_isoc_td(xhci, td, ep, status); - goto cleanup; } if (trb_comp_code == COMP_SHORT_PACKET) ep_ring->last_td_was_short = true; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 00055e6e1ad2..285db9a2288d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1554,6 +1554,7 @@ struct xhci_td { struct xhci_segment *bounce_seg; /* actual_length of the URB has already been set */ bool urb_length_set; + bool error_mid_td; unsigned int num_trbs; }; -- 2.25.1

From: Mathias Nyman <mathias.nyman@linux.intel.com> mainline inclusion from mainline-v6.4-rc3 commit fe82f16aafdaf8002281d3b9524291d4a4a28460 bugzilla: https://gitee.com/src-openeuler/kernel/issues/I9DNQ5 CVE: CVE-2024-26659 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- This incorrect tracking caused unnecessary ring expansion in some usecases which over days of use consume a lot of memory. xhci driver tries to keep track of free transfer blocks (TRBs) on the ring buffer, but failed to add back some cancelled transfers that were turned into no-op operations instead of just moving past them. This can happen if there are several queued pending transfers which then are cancelled in reverse order. Solve this by counting the numer of steps we move the dequeue pointer once we complete a transfer, and add it to the number of free trbs instead of just adding the trb number of the current transfer. This way we ensure we count the no-op trbs on the way as well. Fixes: 55f6153d8cc8 ("xhci: remove extra loop in interrupt context") Cc: stable@vger.kernel.org Reported-by: Miller Hunter <MillerH@hearthnhome.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217242 Tested-by: Miller Hunter <MillerH@hearthnhome.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230515134059.161110-3-mathias.nyman@linux.intel.... Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Conflicts: drivers/usb/host/xhci-ring.c --- drivers/usb/host/xhci-ring.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index cc178a639f1e..4f41f9ba2f28 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -252,6 +252,26 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, trace_xhci_inc_enq(ring); } +static int xhci_num_trbs_to(struct xhci_segment *start_seg, union xhci_trb *start, + struct xhci_segment *end_seg, union xhci_trb *end, + unsigned int num_segs) +{ + union xhci_trb *last_on_seg; + int num = 0; + int i = 0; + + do { + if (start_seg == end_seg && end >= start) + return num + (end - start); + last_on_seg = &start_seg->trbs[TRBS_PER_SEGMENT - 1]; + num += last_on_seg - start; + start_seg = start_seg->next; + start = start_seg->trbs; + } while (i++ <= num_segs); + + return -EINVAL; +} + /* * Check to see if there's room to enqueue num_trbs on the ring and make sure * enqueue pointer will not advance into dequeue segment. See rules above. @@ -2071,6 +2091,7 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, u32 trb_comp_code) { struct xhci_ep_ctx *ep_ctx; + int trbs_freed; ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index); @@ -2103,9 +2124,15 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep, EP_HARD_RESET); } else { /* Update ring dequeue pointer */ + trbs_freed = xhci_num_trbs_to(ep_ring->deq_seg, ep_ring->dequeue, + td->last_trb_seg, td->last_trb, + ep_ring->num_segs); + if (trbs_freed < 0) + xhci_dbg(xhci, "Failed to count freed trbs at TD finish\n"); + else + ep_ring->num_trbs_free += trbs_freed; ep_ring->dequeue = td->last_trb; ep_ring->deq_seg = td->last_trb_seg; - ep_ring->num_trbs_free += td->num_trbs - 1; inc_deq(xhci, ep_ring); } -- 2.25.1