[PATCH OLK-5.10 00/10] scsi: mpt3sas: Driver patch set for
Get patch set from upstream 5.10 LTS stable branch Matt Lupfer (1): scsi: mpt3sas: Page fault in reply q processing Ranjan Kumar (1): scsi: mpt3sas: Perform additional retries if doorbell read returns 0 Sreekanth Reddy (4): scsi: mpt3sas: Fix use-after-free warning scsi: mpt3sas: Don't change DMA mask while reallocating pools scsi: mpt3sas: re-do lost mpt3sas DMA mask fix scsi: mpt3sas: Remove usage of dma_get_required_mask() API Suganath Prabu S (1): scsi: mpt3sas: Force PCIe scatterlist allocations to be within same 4 GB region Tomas Henzl (1): scsi: mpt3sas: Fix a memory leak Wenchao Hao (1): scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add() Yang Yingliang (1): scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add() drivers/scsi/mpt3sas/mpt3sas_base.c | 227 ++++++++++++++++------- drivers/scsi/mpt3sas/mpt3sas_base.h | 2 + drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +- drivers/scsi/mpt3sas/mpt3sas_transport.c | 16 +- 4 files changed, 178 insertions(+), 69 deletions(-) -- 2.33.0
From: Matt Lupfer <mlupfer@ddn.com> stable inclusion from stable-v5.10.108 commit 98e7a654a5bebaf1a28e987af5e44c002544a413 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- commit 69ad4ef868c1fc7609daa235dfa46d28ba7a3ba3 upstream. A page fault was encountered in mpt3sas on a LUN reset error path: [ 145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0) [ 145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2) [ 145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2) [ 145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00 [ 145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0) [ 145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0) [ 149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002) [ 149.875202] BUG: unable to handle page fault for address: 00000007fffc445d [ 149.885617] #PF: supervisor read access in kernel mode [ 149.894346] #PF: error_code(0x0000) - not-present page [ 149.903123] PGD 0 P4D 0 [ 149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S O 5.10.89-altav-1 #1 [ 149.934327] Hardware name: DDN 200NVX2 /200NVX2-MB , BIOS ATHG2.2.02.01 09/10/2021 [ 149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas] [ 149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee [ 149.991952] RSP: 0018:ffffc9000f1ebcb8 EFLAGS: 00010246 [ 150.000937] RAX: 0000000000000055 RBX: 00000007fffc445d RCX: 000000002548f071 [ 150.011841] RDX: 00000000ffff8881 RSI: 0000000000000001 RDI: ffff888125ed50d8 [ 150.022670] RBP: 0000000000000000 R08: 0000000000000000 R09: c0000000ffff7fff [ 150.033445] R10: ffffc9000f1ebb68 R11: ffffc9000f1ebb60 R12: 0000000000000000 [ 150.044204] R13: ffff888125ed50d8 R14: 0000000000000080 R15: 34cdc00034cdea80 [ 150.054963] FS: 0000000000000000(0000) GS:ffff88dfaf200000(0000) knlGS:0000000000000000 [ 150.066715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.076078] CR2: 00000007fffc445d CR3: 000000012448a006 CR4: 0000000000770ee0 [ 150.086887] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 150.097670] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 150.108323] PKRU: 55555554 [ 150.114690] Call Trace: [ 150.120497] ? printk+0x48/0x4a [ 150.127049] mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas] [ 150.136453] mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas] [ 150.145759] scsih_dev_reset+0xea/0x300 [mpt3sas] [ 150.153891] scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod] [ 150.162206] ? __scsi_host_match+0x20/0x20 [scsi_mod] [ 150.170406] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.178925] ? blk_mq_tagset_busy_iter+0x45/0x60 [ 150.186638] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.195087] scsi_error_handler+0x3a5/0x4a0 [scsi_mod] [ 150.203206] ? __schedule+0x1e9/0x610 [ 150.209783] ? scsi_eh_get_sense+0x210/0x210 [scsi_mod] [ 150.217924] kthread+0x12e/0x150 [ 150.224041] ? kthread_worker_fn+0x130/0x130 [ 150.231206] ret_from_fork+0x1f/0x30 This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q pointer outside of the list_for_each_entry() loop. At the end of the full list traversal the pointer is invalid. Move the _base_process_reply_queue() call inside of the loop. Link: https://lore.kernel.org/r/d625deae-a958-0ace-2ba3-0888dd0a415b@ddn.com Fixes: 711a923c14d9 ("scsi: mpt3sas: Postprocessing of target and LUN reset") Cc: stable@vger.kernel.org Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Matt Lupfer <mlupfer@ddn.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 3fbbdf084d67..3153f164554a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -1832,9 +1832,10 @@ mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc, u8 poll) enable_irq(reply_q->os_irq); } } + + if (poll) + _base_process_reply_queue(reply_q); } - if (poll) - _base_process_reply_queue(reply_q); } /** -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> stable inclusion from stable-v5.10.143 commit ea10a652ad2ae2cf3eced6f632a5c98f26727057 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- commit 991df3dd5144f2e6b1c38b8d20ed3d4d21e20b34 upstream. Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 8418b59b3743..c3a5978b0efa 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3501,6 +3501,7 @@ static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc) fw_event = list_first_entry(&ioc->fw_event_list, struct fw_event_work, list); list_del_init(&fw_event->list); + fw_event_work_put(fw_event); } spin_unlock_irqrestore(&ioc->fw_event_lock, flags); @@ -3559,7 +3560,6 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc) if (cancel_work_sync(&fw_event->work)) fw_event_work_put(fw_event); - fw_event_work_put(fw_event); } ioc->fw_events_cleanup = 0; } -- 2.33.0
From: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> stable inclusion from stable-v5.10.146 commit e7fafef9830c4a01e60f76e3860a9bef0262378d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- [ Upstream commit d6adc251dd2fede6aaaf6c39f7e4ad799eda3758 ] According to the MPI specification, PCIe SGL buffers can not cross a 4 GB boundary. While allocating, if any buffer crosses the 4 GB boundary, then: - Release the already allocated memory pools; and - Reallocate them by changing the DMA coherent mask to 32-bit Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@bro... Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: e0e0747de0ea ("scsi: mpt3sas: Fix return value check of dma_get_required_mask()") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 159 ++++++++++++++++++++-------- drivers/scsi/mpt3sas/mpt3sas_base.h | 1 + 2 files changed, 113 insertions(+), 47 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 3153f164554a..18f85c963944 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2822,23 +2822,22 @@ static int _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) { struct sysinfo s; - int dma_mask; if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma || dma_get_required_mask(&pdev->dev) <= 32) - dma_mask = 32; + ioc->dma_mask = 32; /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) - dma_mask = 63; + ioc->dma_mask = 63; else - dma_mask = 64; + ioc->dma_mask = 64; - if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(dma_mask)) || - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(dma_mask))) + if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask)) || + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask))) return -ENODEV; - if (dma_mask > 32) { + if (ioc->dma_mask > 32) { ioc->base_add_sg_single = &_base_add_sg_single_64; ioc->sge_size = sizeof(Mpi2SGESimple64_t); } else { @@ -2848,7 +2847,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) si_meminfo(&s); ioc_info(ioc, "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n", - dma_mask, convert_to_kb(s.totalram)); + ioc->dma_mask, convert_to_kb(s.totalram)); return 0; } @@ -4902,10 +4901,10 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) dma_pool_free(ioc->pcie_sgl_dma_pool, ioc->pcie_sg_lookup[i].pcie_sgl, ioc->pcie_sg_lookup[i].pcie_sgl_dma); + ioc->pcie_sg_lookup[i].pcie_sgl = NULL; } dma_pool_destroy(ioc->pcie_sgl_dma_pool); } - if (ioc->config_page) { dexitprintk(ioc, ioc_info(ioc, "config_page(0x%p): free\n", @@ -4960,6 +4959,89 @@ mpt3sas_check_same_4gb_region(long reply_pool_start_address, u32 pool_sz) return 0; } +/** + * _base_reduce_hba_queue_depth- Retry with reduced queue depth + * @ioc: Adapter object + * + * Return: 0 for success, non-zero for failure. + **/ +static inline int +_base_reduce_hba_queue_depth(struct MPT3SAS_ADAPTER *ioc) +{ + int reduce_sz = 64; + + if ((ioc->hba_queue_depth - reduce_sz) > + (ioc->internal_depth + INTERNAL_SCSIIO_CMDS_COUNT)) { + ioc->hba_queue_depth -= reduce_sz; + return 0; + } else + return -ENOMEM; +} + +/** + * _base_allocate_pcie_sgl_pool - Allocating DMA'able memory + * for pcie sgl pools. + * @ioc: Adapter object + * @sz: DMA Pool size + * @ct: Chain tracker + * Return: 0 for success, non-zero for failure. + */ + +static int +_base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) +{ + int i = 0, j = 0; + struct chain_tracker *ct; + + ioc->pcie_sgl_dma_pool = + dma_pool_create("PCIe SGL pool", &ioc->pdev->dev, sz, + ioc->page_size, 0); + if (!ioc->pcie_sgl_dma_pool) { + ioc_err(ioc, "PCIe SGL pool: dma_pool_create failed\n"); + return -ENOMEM; + } + + ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz; + ioc->chains_per_prp_buffer = + min(ioc->chains_per_prp_buffer, ioc->chains_needed_per_io); + for (i = 0; i < ioc->scsiio_depth; i++) { + ioc->pcie_sg_lookup[i].pcie_sgl = + dma_pool_alloc(ioc->pcie_sgl_dma_pool, GFP_KERNEL, + &ioc->pcie_sg_lookup[i].pcie_sgl_dma); + if (!ioc->pcie_sg_lookup[i].pcie_sgl) { + ioc_err(ioc, "PCIe SGL pool: dma_pool_alloc failed\n"); + return -EAGAIN; + } + + if (!mpt3sas_check_same_4gb_region( + (long)ioc->pcie_sg_lookup[i].pcie_sgl, sz)) { + ioc_err(ioc, "PCIE SGLs are not in same 4G !! pcie sgl (0x%p) dma = (0x%llx)\n", + ioc->pcie_sg_lookup[i].pcie_sgl, + (unsigned long long) + ioc->pcie_sg_lookup[i].pcie_sgl_dma); + ioc->use_32bit_dma = true; + return -EAGAIN; + } + + for (j = 0; j < ioc->chains_per_prp_buffer; j++) { + ct = &ioc->chain_lookup[i].chains_per_smid[j]; + ct->chain_buffer = + ioc->pcie_sg_lookup[i].pcie_sgl + + (j * ioc->chain_segment_sz); + ct->chain_buffer_dma = + ioc->pcie_sg_lookup[i].pcie_sgl_dma + + (j * ioc->chain_segment_sz); + } + } + dinitprintk(ioc, ioc_info(ioc, + "PCIe sgl pool depth(%d), element_size(%d), pool_size(%d kB)\n", + ioc->scsiio_depth, sz, (sz * ioc->scsiio_depth)/1024)); + dinitprintk(ioc, ioc_info(ioc, + "Number of chains can fit in a PRP page(%d)\n", + ioc->chains_per_prp_buffer)); + return 0; +} + /** * base_alloc_rdpq_dma_pool - Allocating DMA'able memory * for reply queues. @@ -5058,7 +5140,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) unsigned short sg_tablesize; u16 sge_size; int i, j; - int ret = 0; + int ret = 0, rc = 0; struct chain_tracker *ct; dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); @@ -5357,6 +5439,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) * be required for NVMe PRP's, only each set of NVMe blocks will be * contiguous, so a new set is allocated for each possible I/O. */ + ioc->chains_per_prp_buffer = 0; if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) { nvme_blocks_needed = @@ -5371,43 +5454,11 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) goto out; } sz = nvme_blocks_needed * ioc->page_size; - ioc->pcie_sgl_dma_pool = - dma_pool_create("PCIe SGL pool", &ioc->pdev->dev, sz, 16, 0); - if (!ioc->pcie_sgl_dma_pool) { - ioc_info(ioc, "PCIe SGL pool: dma_pool_create failed\n"); - goto out; - } - - ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz; - ioc->chains_per_prp_buffer = min(ioc->chains_per_prp_buffer, - ioc->chains_needed_per_io); - - for (i = 0; i < ioc->scsiio_depth; i++) { - ioc->pcie_sg_lookup[i].pcie_sgl = dma_pool_alloc( - ioc->pcie_sgl_dma_pool, GFP_KERNEL, - &ioc->pcie_sg_lookup[i].pcie_sgl_dma); - if (!ioc->pcie_sg_lookup[i].pcie_sgl) { - ioc_info(ioc, "PCIe SGL pool: dma_pool_alloc failed\n"); - goto out; - } - for (j = 0; j < ioc->chains_per_prp_buffer; j++) { - ct = &ioc->chain_lookup[i].chains_per_smid[j]; - ct->chain_buffer = - ioc->pcie_sg_lookup[i].pcie_sgl + - (j * ioc->chain_segment_sz); - ct->chain_buffer_dma = - ioc->pcie_sg_lookup[i].pcie_sgl_dma + - (j * ioc->chain_segment_sz); - } - } - - dinitprintk(ioc, - ioc_info(ioc, "PCIe sgl pool depth(%d), element_size(%d), pool_size(%d kB)\n", - ioc->scsiio_depth, sz, - (sz * ioc->scsiio_depth) / 1024)); - dinitprintk(ioc, - ioc_info(ioc, "Number of chains can fit in a PRP page(%d)\n", - ioc->chains_per_prp_buffer)); + rc = _base_allocate_pcie_sgl_pool(ioc, sz); + if (rc == -ENOMEM) + return -ENOMEM; + else if (rc == -EAGAIN) + goto try_32bit_dma; total_sz += sz * ioc->scsiio_depth; } @@ -5577,6 +5628,19 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) ioc->shost->sg_tablesize); return 0; +try_32bit_dma: + _base_release_memory_pools(ioc); + if (ioc->use_32bit_dma && (ioc->dma_mask > 32)) { + /* Change dma coherent mask to 32 bit and reallocate */ + if (_base_config_dma_addressing(ioc, ioc->pdev) != 0) { + pr_err("Setting 32 bit coherent DMA mask Failed %s\n", + pci_name(ioc->pdev)); + return -ENODEV; + } + } else if (_base_reduce_hba_queue_depth(ioc) != 0) + return -ENOMEM; + goto retry_allocation; + out: return -ENOMEM; } @@ -7239,6 +7303,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->rdpq_array_enable_assigned = 0; ioc->use_32bit_dma = false; + ioc->dma_mask = 64; if (ioc->is_aero_ioc) ioc->base_readl = &_base_readl_aero; else diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index bc8beb10f3fc..823bbe64a477 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1257,6 +1257,7 @@ struct MPT3SAS_ADAPTER { u16 thresh_hold; u8 high_iops_queues; u32 drv_support_bitmap; + u32 dma_mask; bool enable_sdev_max_qd; bool use_32bit_dma; -- 2.33.0
From: Yang Yingliang <yangyingliang@huawei.com> stable inclusion from stable-v5.10.163 commit ce1a69cc85006b494353911b35171da195d79e25 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- [ Upstream commit 78316e9dfc24906dd474630928ed1d3c562b568e ] In mpt3sas_transport_port_add(), if sas_rphy_add() returns error, sas_rphy_free() needs be called to free the resource allocated in sas_end_device_alloc(). Otherwise a kernel crash will happen: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_rphy_remove+0x50/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_rphy_remove+0x38/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] scsih_remove+0xd8/0x420 [mpt3sas] Because transport_add_device() is not called when sas_rphy_add() fails, the device is not added. When sas_rphy_remove() is subsequently called to remove the device in the remove() path, a NULL pointer dereference happens. Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_transport.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index 6ec5b7f33dfd..b58f4d9c296a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -712,6 +712,8 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, if ((sas_rphy_add(rphy))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); + sas_rphy_free(rphy); + rphy = NULL; } if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { -- 2.33.0
From: Tomas Henzl <thenzl@redhat.com> stable inclusion from stable-v5.10.173 commit 30c7c72b6cf9d8c95f9b219c9d2e4e31b15bebe5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- [ Upstream commit 54dd96015e8d7a2a07359e2dfebf05b529d1780c ] Add a forgotten kfree(). Fixes: dbec4c9040ed ("scsi: mpt3sas: lockless command submission") Link: https://lore.kernel.org/r/20230207152159.18627-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 18f85c963944..c7830f7ad19d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4905,6 +4905,9 @@ _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) } dma_pool_destroy(ioc->pcie_sgl_dma_pool); } + kfree(ioc->pcie_sg_lookup); + ioc->pcie_sg_lookup = NULL; + if (ioc->config_page) { dexitprintk(ioc, ioc_info(ioc, "config_page(0x%p): free\n", -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> stable inclusion from stable-v5.10.173 commit 2392303df240e7d036df8872ada176734e108036 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- commit 9df650963bf6d6c2c3fcd325d8c44ca2b99554fe upstream. When a pool crosses the 4GB boundary region then before reallocating pools change the coherent DMA mask to 32 bits and keep the normal DMA mask set to 63/64 bits. Link: https://lore.kernel.org/r/20220825075457.16422-2-sreekanth.reddy@broadcom.co... Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index c7830f7ad19d..eb37460ce109 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2822,19 +2822,26 @@ static int _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) { struct sysinfo s; + u64 coherent_dma_mask, dma_mask; - if (ioc->is_mcpu_endpoint || - sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma || - dma_get_required_mask(&pdev->dev) <= 32) + if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || + dma_get_required_mask(&pdev->dev) <= 32) { ioc->dma_mask = 32; + coherent_dma_mask = dma_mask = DMA_BIT_MASK(32); /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ - else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) + } else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) { ioc->dma_mask = 63; - else + coherent_dma_mask = dma_mask = DMA_BIT_MASK(63); + } else { ioc->dma_mask = 64; + coherent_dma_mask = dma_mask = DMA_BIT_MASK(64); + } + + if (ioc->use_32bit_dma) + coherent_dma_mask = DMA_BIT_MASK(32); - if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask)) || - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask))) + if (dma_set_mask(&pdev->dev, dma_mask) || + dma_set_coherent_mask(&pdev->dev, coherent_dma_mask)) return -ENODEV; if (ioc->dma_mask > 32) { -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> stable inclusion from stable-v5.10.173 commit 747652f9c5037cc27544c1fe44c4125876e4ef34 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- commit 1a2dcbdde82e3a5f1db9b2f4c48aa1aeba534fb2 upstream. This is a re-do of commit e0e0747de0ea ("scsi: mpt3sas: Fix return value check of dma_get_required_mask()"), which I ended up undoing in a mis-merge in commit 62e6e5940c0c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi"). The original commit message was scsi: mpt3sas: Fix return value check of dma_get_required_mask() Fix the incorrect return value check of dma_get_required_mask(). Due to this incorrect check, the driver was always setting the DMA mask to 63 bit. Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.co... Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> and this fix was lost when I mis-merged the conflict with commit 9df650963bf6 ("scsi: mpt3sas: Don't change DMA mask while reallocating pools"). Reported-by: Juergen Gross <jgross@suse.com> Fixes: 62e6e5940c0c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi") Link: https://lore.kernel.org/all/CAHk-=wjaK-TxrNaGtFDpL9qNHL1MVkWXO1TT6vObD5tXMSC... Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index eb37460ce109..2ab72f8818ee 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2825,7 +2825,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) u64 coherent_dma_mask, dma_mask; if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || - dma_get_required_mask(&pdev->dev) <= 32) { + dma_get_required_mask(&pdev->dev) <= DMA_BIT_MASK(32)) { ioc->dma_mask = 32; coherent_dma_mask = dma_mask = DMA_BIT_MASK(32); /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ -- 2.33.0
From: Sreekanth Reddy <sreekanth.reddy@broadcom.com> stable inclusion from stable-v5.10.173 commit 1dfc0a52f768d481de6bb672904cd382ead7ca0e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- commit 06e472acf964649a58b7de35fc9cdc3151acb970 upstream. Remove the usage of dma_get_required_mask() API. Directly set the DMA mask to 63/64 if the system is a 64bit machine. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20221028091655.17741-2-sreekanth.reddy@broadcom.co... Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 2ab72f8818ee..26b15a24300e 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2824,8 +2824,7 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) struct sysinfo s; u64 coherent_dma_mask, dma_mask; - if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4 || - dma_get_required_mask(&pdev->dev) <= DMA_BIT_MASK(32)) { + if (ioc->is_mcpu_endpoint || sizeof(dma_addr_t) == 4) { ioc->dma_mask = 32; coherent_dma_mask = dma_mask = DMA_BIT_MASK(32); /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ -- 2.33.0
From: Wenchao Hao <haowenchao2@huawei.com> stable inclusion from stable-v5.10.176 commit 6f0c2f70d9929208d8427ec72c3ed91e2251e289 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- [ Upstream commit d3c57724f1569311e4b81e98fad0931028b9bdcd ] Port is allocated by sas_port_alloc_num() and rphy is allocated by either sas_end_device_alloc() or sas_expander_alloc(), all of which may return NULL. So we need to check the rphy to avoid possible NULL pointer access. If sas_rphy_add() returned with failure, rphy is set to NULL. We would access the rphy in the following lines which would also result NULL pointer access. Fixes: 78316e9dfc24 ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()") Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_transport.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index b58f4d9c296a..326265fd7f91 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -670,7 +670,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, goto out_fail; } port = sas_port_alloc_num(sas_node->parent_dev); - if ((sas_port_add(port))) { + if (!port || (sas_port_add(port))) { ioc_err(ioc, "failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); goto out_fail; @@ -695,6 +695,12 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, rphy = sas_expander_alloc(port, mpt3sas_port->remote_identify.device_type); + if (!rphy) { + ioc_err(ioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_delete_port; + } + rphy->identify = mpt3sas_port->remote_identify; if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { @@ -714,6 +720,7 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, __FILE__, __LINE__, __func__); sas_rphy_free(rphy); rphy = NULL; + goto out_delete_port; } if (mpt3sas_port->remote_identify.device_type == SAS_END_DEVICE) { @@ -740,7 +747,10 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle, rphy_to_expander_device(rphy)); return mpt3sas_port; - out_fail: +out_delete_port: + sas_port_delete(port); + +out_fail: list_for_each_entry_safe(mpt3sas_phy, next, &mpt3sas_port->phy_list, port_siblings) list_del(&mpt3sas_phy->port_siblings); -- 2.33.0
From: Ranjan Kumar <ranjan.kumar@broadcom.com> stable inclusion from stable-v5.10.195 commit ffed0c8fcf043946f2bf09bd2a9caa1ca5289959 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I868SX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=l... -------------------------------- commit 4ca10f3e31745d35249a727ecd108eb58f0a8c5e upstream. The driver retries certain register reads 3 times if the returned value is 0. This was done because the controller could return 0 for certain registers if other registers were being accessed concurrently by the BMC. In certain systems with increased BMC interactions, the register values returned can be 0 for longer than 3 retries. Change the retry count from 3 to 30 for the affected registers to prevent problems with out-of-band management. Fixes: b899202901a8 ("scsi: mpt3sas: Add separate function for aero doorbell reads") Cc: stable@vger.kernel.org Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hao Zhang <Hao.Zhang@windriver.com> --- drivers/scsi/mpt3sas/mpt3sas_base.c | 46 +++++++++++++++++++++-------- drivers/scsi/mpt3sas/mpt3sas_base.h | 1 + 2 files changed, 34 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 26b15a24300e..3728e4cf6e05 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -131,6 +131,9 @@ _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc); static void _base_clear_outstanding_commands(struct MPT3SAS_ADAPTER *ioc); +static u32 +_base_readl_ext_retry(const volatile void __iomem *addr); + /** * mpt3sas_base_check_cmd_timeout - Function * to check timeout and command termination due @@ -206,6 +209,20 @@ _base_readl_aero(const volatile void __iomem *addr) return ret_val; } +static u32 +_base_readl_ext_retry(const volatile void __iomem *addr) +{ + u32 i, ret_val; + + for (i = 0 ; i < 30 ; i++) { + ret_val = readl(addr); + if (ret_val == 0) + continue; + } + + return ret_val; +} + static inline u32 _base_readl(const volatile void __iomem *addr) { @@ -861,7 +878,7 @@ mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc) dump_stack(); - doorbell = ioc->base_readl(&ioc->chip->Doorbell); + doorbell = ioc->base_readl_ext_retry(&ioc->chip->Doorbell); if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mpt3sas_print_fault_code(ioc, doorbell & MPI2_DOORBELL_DATA_MASK); @@ -5667,7 +5684,7 @@ mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked) { u32 s, sc; - s = ioc->base_readl(&ioc->chip->Doorbell); + s = ioc->base_readl_ext_retry(&ioc->chip->Doorbell); sc = s & MPI2_IOC_STATE_MASK; return cooked ? sc : s; } @@ -5812,7 +5829,7 @@ _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout) __func__, count, timeout)); return 0; } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { - doorbell = ioc->base_readl(&ioc->chip->Doorbell); + doorbell = ioc->base_readl_ext_retry(&ioc->chip->Doorbell); if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mpt3sas_print_fault_code(ioc, doorbell); @@ -5852,7 +5869,7 @@ _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout) count = 0; cntdn = 1000 * timeout; do { - doorbell_reg = ioc->base_readl(&ioc->chip->Doorbell); + doorbell_reg = ioc->base_readl_ext_retry(&ioc->chip->Doorbell); if (!(doorbell_reg & MPI2_DOORBELL_USED)) { dhsprintk(ioc, ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", @@ -5989,7 +6006,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, __le32 *mfp; /* make sure doorbell is not in use */ - if ((ioc->base_readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { + if ((ioc->base_readl_ext_retry(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { ioc_err(ioc, "doorbell is in use (line=%d)\n", __LINE__); return -EFAULT; } @@ -6038,7 +6055,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, } /* read the first two 16-bits, it gives the total length of the reply */ - reply[0] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell) + reply[0] = le16_to_cpu(ioc->base_readl_ext_retry(&ioc->chip->Doorbell) & MPI2_DOORBELL_DATA_MASK); writel(0, &ioc->chip->HostInterruptStatus); if ((_base_wait_for_doorbell_int(ioc, 5))) { @@ -6046,7 +6063,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, __LINE__); return -EFAULT; } - reply[1] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell) + reply[1] = le16_to_cpu(ioc->base_readl_ext_retry(&ioc->chip->Doorbell) & MPI2_DOORBELL_DATA_MASK); writel(0, &ioc->chip->HostInterruptStatus); @@ -6057,10 +6074,10 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, return -EFAULT; } if (i >= reply_bytes/2) /* overflow case */ - ioc->base_readl(&ioc->chip->Doorbell); + ioc->base_readl_ext_retry(&ioc->chip->Doorbell); else reply[i] = le16_to_cpu( - ioc->base_readl(&ioc->chip->Doorbell) + ioc->base_readl_ext_retry(&ioc->chip->Doorbell) & MPI2_DOORBELL_DATA_MASK); writel(0, &ioc->chip->HostInterruptStatus); } @@ -6906,7 +6923,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) goto out; } - host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); + host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic); drsprintk(ioc, ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n", count, host_diagnostic)); @@ -6926,7 +6943,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) for (count = 0; count < (300000000 / MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) { - host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); + host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic); if (host_diagnostic == 0xFFFFFFFF) { ioc_info(ioc, @@ -7313,10 +7330,13 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) ioc->rdpq_array_enable_assigned = 0; ioc->use_32bit_dma = false; ioc->dma_mask = 64; - if (ioc->is_aero_ioc) + if (ioc->is_aero_ioc) { ioc->base_readl = &_base_readl_aero; - else + ioc->base_readl_ext_retry = &_base_readl_ext_retry; + } else { ioc->base_readl = &_base_readl; + ioc->base_readl_ext_retry = &_base_readl; + } r = mpt3sas_base_map_resources(ioc); if (r) goto out_free_resources; diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 823bbe64a477..dc0e130ba5ea 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1469,6 +1469,7 @@ struct MPT3SAS_ADAPTER { u8 diag_trigger_active; u8 atomic_desc_capable; BASE_READ_REG base_readl; + BASE_READ_REG base_readl_ext_retry; struct SL_WH_MASTER_TRIGGER_T diag_trigger_master; struct SL_WH_EVENT_TRIGGERS_T diag_trigger_event; struct SL_WH_SCSI_TRIGGERS_T diag_trigger_scsi; -- 2.33.0
participants (1)
-
Hao Zhang