tree: https://gitee.com/openeuler/kernel.git OLK-5.10 head: 68b0fb4e955465eef28bed1f5a252c4e6c636a36 commit: be9f642e83e44150c1e0b43e6abf884d07d6fe14 [2490/2490] scsi: core: Stop using DRIVER_ERROR config: x86_64-randconfig-161-20241127 (https://download.01.org/0day-ci/archive/20241127/202411272026.nZlY6xmo-lkp@i...) compiler: gcc-12 (Debian 12.2.0-14) 12.2.0 If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411272026.nZlY6xmo-lkp@intel.com/ New smatch warnings: drivers/scsi/sd.c:2200 sd_spinup_disk() warn: unsigned 'the_result' is never less than zero. Old smatch warnings: drivers/scsi/sd.c:1728 sd_sync_cache() warn: sizeof(NUMBER)? include/scsi/scsi_device.h:477 scsi_execute_req() warn: sizeof(NUMBER)? drivers/scsi/sd.c:3616 sd_start_stop_device() warn: sizeof(NUMBER)? vim +/the_result +2200 drivers/scsi/sd.c 2154 2155 /* 2156 * spinup disk - called only in sd_revalidate_disk() 2157 */ 2158 static void 2159 sd_spinup_disk(struct scsi_disk *sdkp) 2160 { 2161 unsigned char cmd[10]; 2162 unsigned long spintime_expire = 0; 2163 int retries, spintime; 2164 unsigned int the_result; 2165 struct scsi_sense_hdr sshdr; 2166 int sense_valid = 0; 2167 2168 spintime = 0; 2169 2170 /* Spin up drives, as required. Only do this at boot time */ 2171 /* Spinup needs to be done for module loads too. */ 2172 do { 2173 retries = 0; 2174 2175 do { 2176 cmd[0] = TEST_UNIT_READY; 2177 memset((void *) &cmd[1], 0, 9); 2178 2179 the_result = scsi_execute_req(sdkp->device, cmd, 2180 DMA_NONE, NULL, 0, 2181 &sshdr, SD_TIMEOUT, 2182 sdkp->max_retries, NULL); 2183 2184 /* 2185 * If the drive has indicated to us that it 2186 * doesn't have any media in it, don't bother 2187 * with any more polling. 2188 */ 2189 if (media_not_present(sdkp, &sshdr)) 2190 return; 2191 2192 if (the_result) 2193 sense_valid = scsi_sense_valid(&sshdr); 2194 retries++; 2195 } while (retries < 3 && 2196 (!scsi_status_is_good(the_result) || 2197 ((driver_byte(the_result) == DRIVER_SENSE) && 2198 sense_valid && sshdr.sense_key == UNIT_ATTENTION))); 2199

2200 if (the_result < 0 || driver_byte(the_result) != DRIVER_SENSE) { 2201 /* no sense, TUR either succeeded or failed 2202 * with a status error */ 2203 if(!spintime && !scsi_status_is_good(the_result)) { 2204 sd_print_result(sdkp, "Test Unit Ready failed", 2205 the_result); 2206 } 2207 break; 2208 } 2209 2210 /* 2211 * The device does not want the automatic start to be issued. 2212 */ 2213 if (sdkp->device->no_start_on_add) 2214 break; 2215 2216 if (sense_valid && sshdr.sense_key == NOT_READY) { 2217 if (sshdr.asc == 4 && sshdr.ascq == 3) 2218 break; /* manual intervention required */ 2219 if (sshdr.asc == 4 && sshdr.ascq == 0xb) 2220 break; /* standby */ 2221 if (sshdr.asc == 4 && sshdr.ascq == 0xc) 2222 break; /* unavailable */ 2223 if (sshdr.asc == 4 && sshdr.ascq == 0x1b) 2224 break; /* sanitize in progress */ 2225 /* 2226 * Issue command to spin up drive when not ready 2227 */ 2228 if (!spintime) { 2229 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk..."); 2230 cmd[0] = START_STOP; 2231 cmd[1] = 1; /* Return immediately */ 2232 memset((void *) &cmd[2], 0, 8); 2233 cmd[4] = 1; /* Start spin cycle */ 2234 if (sdkp->device->start_stop_pwr_cond) 2235 cmd[4] |= 1 << 4; 2236 scsi_execute_req(sdkp->device, cmd, DMA_NONE, 2237 NULL, 0, &sshdr, 2238 SD_TIMEOUT, sdkp->max_retries, 2239 NULL); 2240 spintime_expire = jiffies + 100 * HZ; 2241 spintime = 1; 2242 } 2243 /* Wait 1 second for next try */ 2244 msleep(1000); 2245 printk(KERN_CONT "."); 2246 2247 /* 2248 * Wait for USB flash devices with slow firmware. 2249 * Yes, this sense key/ASC combination shouldn't 2250 * occur here. It's characteristic of these devices. 2251 */ 2252 } else if (sense_valid && 2253 sshdr.sense_key == UNIT_ATTENTION && 2254 sshdr.asc == 0x28) { 2255 if (!spintime) { 2256 spintime_expire = jiffies + 5 * HZ; 2257 spintime = 1; 2258 } 2259 /* Wait 1 second for next try */ 2260 msleep(1000); 2261 } else { 2262 /* we don't understand the sense code, so it's 2263 * probably pointless to loop */ 2264 if(!spintime) { 2265 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n"); 2266 sd_print_sense_hdr(sdkp, &sshdr); 2267 } 2268 break; 2269 } 2270 2271 } while (spintime && time_before_eq(jiffies, spintime_expire)); 2272 2273 if (spintime) { 2274 if (scsi_status_is_good(the_result)) 2275 printk(KERN_CONT "ready\n"); 2276 else 2277 printk(KERN_CONT "not responding...\n"); 2278 } 2279 } 2280

-- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki