From: Ankit Agrawal <ankita@nvidia.com> mainline inclusion from mainline-v6.9-rc1 commit c034ec84e8795cf379bd47cc8871445f070a0110 category: bugfix bugzilla: https://atomgit.com/openeuler/kernel/issues/9340 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- Currently, KVM for ARM64 maps at stage 2 memory that is considered device (i.e. it is not RAM) with DEVICE_nGnRE memory attributes; this setting overrides (as per the ARM architecture [1]) any device MMIO mapping present at stage 1, resulting in a set-up whereby a guest operating system cannot determine device MMIO mapping memory attributes on its own but it is always overridden by the KVM stage 2 default. This set-up does not allow guest operating systems to select device memory attributes independently from KVM stage-2 mappings (refer to [1], "Combining stage 1 and stage 2 memory type attributes"), which turns out to be an issue in that guest operating systems (e.g. Linux) may request to map devices MMIO regions with memory attributes that guarantee better performance (e.g. gathering attribute - that for some devices can generate larger PCIe memory writes TLPs) and specific operations (e.g. unaligned transactions) such as the NormalNC memory type. The default device stage 2 mapping was chosen in KVM for ARM64 since it was considered safer (i.e. it would not allow guests to trigger uncontained failures ultimately crashing the machine) but this turned out to be asynchronous (SError) defeating the purpose. Failures containability is a property of the platform and is independent from the memory type used for MMIO device memory mappings. Actually, DEVICE_nGnRE memory type is even more problematic than Normal-NC memory type in terms of faults containability in that e.g. aborts triggered on DEVICE_nGnRE loads cannot be made, architecturally, synchronous (i.e. that would imply that the processor should issue at most 1 load transaction at a time - it cannot pipeline them - otherwise the synchronous abort semantics would break the no-speculation attribute attached to DEVICE_XXX memory). This means that regardless of the combined stage1+stage2 mappings a platform is safe if and only if device transactions cannot trigger uncontained failures and that in turn relies on platform capabilities and the device type being assigned (i.e. PCIe AER/DPC error containment and RAS architecture[3]); therefore the default KVM device stage 2 memory attributes play no role in making device assignment safer for a given platform (if the platform design adheres to design guidelines outlined in [3]) and therefore can be relaxed. For all these reasons, relax the KVM stage 2 device memory attributes from DEVICE_nGnRE to Normal-NC. The NormalNC was chosen over a different Normal memory type default at stage-2 (e.g. Normal Write-through) to avoid cache allocation/snooping. Relaxing S2 KVM device MMIO mappings to Normal-NC is not expected to trigger any issue on guest device reclaim use cases either (i.e. device MMIO unmap followed by a device reset) at least for PCIe devices, in that in PCIe a device reset is architected and carried out through PCI config space transactions that are naturally ordered with respect to MMIO transactions according to the PCI ordering rules. Having Normal-NC S2 default puts guests in control (thanks to stage1+stage2 combined memory attributes rules [1]) of device MMIO regions memory mappings, according to the rules described in [1] and summarized here ([(S1) - stage1], [(S2) - stage 2]): S1 | S2 | Result NORMAL-WB | NORMAL-NC | NORMAL-NC NORMAL-WT | NORMAL-NC | NORMAL-NC NORMAL-NC | NORMAL-NC | NORMAL-NC DEVICE<attr> | NORMAL-NC | DEVICE<attr> It is worth noting that currently, to map devices MMIO space to user space in a device pass-through use case the VFIO framework applies memory attributes derived from pgprot_noncached() settings applied to VMAs, which result in device-nGnRnE memory attributes for the stage-1 VMM mappings. This means that a userspace mapping for device MMIO space carried out with the current VFIO framework and a guest OS mapping for the same MMIO space may result in a mismatched alias as described in [2]. Defaulting KVM device stage-2 mappings to Normal-NC attributes does not change anything in this respect, in that the mismatched aliases would only affect (refer to [2] for a detailed explanation) ordering between the userspace and GuestOS mappings resulting stream of transactions (i.e. it does not cause loss of property for either stream of transactions on its own), which is harmless given that the userspace and GuestOS access to the device is carried out through independent transactions streams. A Normal-NC flag is not present today. So add a new kvm_pgtable_prot (KVM_PGTABLE_PROT_NORMAL_NC) flag for it, along with its corresponding PTE value 0x5 (0b101) determined from [1]. Lastly, adapt the stage2 PTE property setter function (stage2_set_prot_attr) to handle the NormalNC attribute. The entire discussion leading to this patch series may be followed through the following links. Link: https://lore.kernel.org/all/20230907181459.18145-3-ankita@nvidia.com Link: https://lore.kernel.org/r/20231205033015.10044-1-ankita@nvidia.com [1] section D8.5.5 - DDI0487J_a_a-profile_architecture_reference_manual.pdf [2] section B2.8 - DDI0487J_a_a-profile_architecture_reference_manual.pdf [3] sections 1.7.7.3/1.8.5.2/appendix C - DEN0029H_SBSA_7.1.pdf Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Ankit Agrawal <ankita@nvidia.com> Signed-off-by: Tian Zheng <zhengtian10@huawei.com> Link: https://lore.kernel.org/r/20230907181459.18145-2-ankita@nvidia.com/ Link: https://lore.kernel.org/r/20231205033015.10044-1-ankita@nvidia.com --- arch/arm64/include/asm/kvm_pgtable.h | 4 +++- arch/arm64/include/asm/memory.h | 2 ++ arch/arm64/kvm/hyp/pgtable.c | 24 +++++++++++++++++++----- 3 files changed, 24 insertions(+), 6 deletions(-) diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h index 5a640122e241..2010ec3b59b5 100644 --- a/arch/arm64/include/asm/kvm_pgtable.h +++ b/arch/arm64/include/asm/kvm_pgtable.h @@ -178,6 +178,7 @@ enum kvm_pgtable_stage2_flags { * @KVM_PGTABLE_PROT_W: Write permission. * @KVM_PGTABLE_PROT_R: Read permission. * @KVM_PGTABLE_PROT_DEVICE: Device attributes. + * @KVM_PGTABLE_PROT_NORMAL_NC: Normal noncacheable attributes. * @KVM_PGTABLE_PROT_SW0: Software bit 0. * @KVM_PGTABLE_PROT_SW1: Software bit 1. * @KVM_PGTABLE_PROT_SW2: Software bit 2. @@ -189,7 +190,8 @@ enum kvm_pgtable_prot { KVM_PGTABLE_PROT_R = BIT(2), KVM_PGTABLE_PROT_DEVICE = BIT(3), - KVM_PGTABLE_PROT_DBM = BIT(4), + KVM_PGTABLE_PROT_NORMAL_NC = BIT(4), + KVM_PGTABLE_PROT_DBM = BIT(5), KVM_PGTABLE_PROT_SW0 = BIT(55), KVM_PGTABLE_PROT_SW1 = BIT(56), diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index fde4186cc387..c247e5f29d5a 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -147,6 +147,7 @@ * Memory types for Stage-2 translation */ #define MT_S2_NORMAL 0xf +#define MT_S2_NORMAL_NC 0x5 #define MT_S2_DEVICE_nGnRE 0x1 /* @@ -154,6 +155,7 @@ * Stage-2 enforces Normal-WB and Device-nGnRE */ #define MT_S2_FWB_NORMAL 6 +#define MT_S2_FWB_NORMAL_NC 5 #define MT_S2_FWB_DEVICE_nGnRE 1 #ifdef CONFIG_ARM64_4K_PAGES diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c index e6ec72f49e11..49a856d96fcc 100644 --- a/arch/arm64/kvm/hyp/pgtable.c +++ b/arch/arm64/kvm/hyp/pgtable.c @@ -689,15 +689,29 @@ void kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu, static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot prot, kvm_pte_t *ptep) { - bool device = prot & KVM_PGTABLE_PROT_DEVICE; - kvm_pte_t attr = device ? KVM_S2_MEMATTR(pgt, DEVICE_nGnRE) : - KVM_S2_MEMATTR(pgt, NORMAL); + kvm_pte_t attr; u32 sh = KVM_PTE_LEAF_ATTR_LO_S2_SH_IS; + switch (prot & (KVM_PGTABLE_PROT_DEVICE | + KVM_PGTABLE_PROT_NORMAL_NC)) { + case KVM_PGTABLE_PROT_DEVICE | KVM_PGTABLE_PROT_NORMAL_NC: + return -EINVAL; + case KVM_PGTABLE_PROT_DEVICE: + if (prot & KVM_PGTABLE_PROT_X) + return -EINVAL; + attr = KVM_S2_MEMATTR(pgt, DEVICE_nGnRE); + break; + case KVM_PGTABLE_PROT_NORMAL_NC: + if (prot & KVM_PGTABLE_PROT_X) + return -EINVAL; + attr = KVM_S2_MEMATTR(pgt, NORMAL_NC); + break; + default: + attr = KVM_S2_MEMATTR(pgt, NORMAL); + } + if (!(prot & KVM_PGTABLE_PROT_X)) attr |= KVM_PTE_LEAF_ATTR_HI_S2_XN; - else if (device) - return -EINVAL; if (prot & KVM_PGTABLE_PROT_R) attr |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R; -- 2.33.0

From: Ankit Agrawal <ankita@nvidia.com> mainline inclusion from mainline-v6.9-rc1 commit 8c47ce3e1d2c285349edf426b98e8460ce3e2f33 category: bugfix bugzilla: https://atomgit.com/openeuler/kernel/issues/9340 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... -------------------------------- To provide VM with the ability to get device IO memory with NormalNC property, map device MMIO in KVM for ARM64 at stage2 as NormalNC. Having NormalNC S2 default puts guests in control (based on [1], "Combining stage 1 and stage 2 memory type attributes") of device MMIO regions memory mappings. The rules are summarized below: ([(S1) - stage1], [(S2) - stage 2]) S1 | S2 | Result NORMAL-WB | NORMAL-NC | NORMAL-NC NORMAL-WT | NORMAL-NC | NORMAL-NC NORMAL-NC | NORMAL-NC | NORMAL-NC DEVICE<attr> | NORMAL-NC | DEVICE<attr> Still this cannot be generalized to non PCI devices such as GICv2. There is insufficient information and uncertainity in the behavior of non PCI driver. A driver must indicate support using the new flag VM_ALLOW_ANY_UNCACHED. Adapt KVM to make use of the flag VM_ALLOW_ANY_UNCACHED as indicator to activate the S2 setting to NormalNc. [1] section D8.5.5 of DDI0487J_a_a-profile_architecture_reference_manual.pdf Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Ankit Agrawal <ankita@nvidia.com> Signed-off-by: Tian Zheng <zhengtian10@huawei.com> --- arch/arm64/kvm/mmu.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c index fbc62b27adc8..e4fe5c7785e2 100644 --- a/arch/arm64/kvm/mmu.c +++ b/arch/arm64/kvm/mmu.c @@ -1476,7 +1476,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, int ret = 0; bool write_fault, writable, force_pte = false; bool exec_fault, mte_allowed; - bool device = false; + bool device = false, vfio_allow_any_uc = false; unsigned long mmu_seq; struct kvm *kvm = vcpu->kvm; struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache; @@ -1583,6 +1583,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, gfn = kvm_gpa_from_fault(kvm, fault_ipa) >> PAGE_SHIFT; mte_allowed = kvm_vma_mte_allowed(vma); + vfio_allow_any_uc = vma->vm_flags & VM_ALLOW_ANY_UNCACHED; + /* Don't use the VMA after the unlock -- it may have vanished */ vma = NULL; @@ -1686,10 +1688,14 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (exec_fault) prot |= KVM_PGTABLE_PROT_X; - if (device) - prot |= KVM_PGTABLE_PROT_DEVICE; - else if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC)) + if (device) { + if (vfio_allow_any_uc) + prot |= KVM_PGTABLE_PROT_NORMAL_NC; + else + prot |= KVM_PGTABLE_PROT_DEVICE; + } else if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC)) { prot |= KVM_PGTABLE_PROT_X; + } /* * Under the premise of getting a FSC_PERM fault, we just need to relax -- 2.33.0