March 2021 - Linuxarm - mailweb.openeuler.org

[PATCH v2] iommu/arm-smmu-v3: Add a check to avoid invalid iotlb sync
by chenxiang 30 Mar '21

30 Mar '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> It may send a invalid tlb sync for smmuv3 if iotlb_gather is not valid (iotlb_gather->pgsize = 0). So add a check to avoid invalid iotlb sync for it. Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> --- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c index 8594b4a..941ba54 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c @@ -2305,6 +2305,9 @@ static void arm_smmu_iotlb_sync(struct iommu_domain *domain, { struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain); + if (!gather->pgsize) + return; + arm_smmu_tlb_inv_range_domain(gather->start, gather->end - gather->start + 1, gather->pgsize, true, smmu_domain); -- 2.8.1

2 1

[PATCH] iommu: Add a check to avoid invalid iotlb sync
by chenxiang 30 Mar '21

30 Mar '21

From: Xiang Chen <chenxiang66(a)hisilicon.com> Currently it will send a iotlb sync at end of iommu unmap even if iotlb_gather is not valid (iotlb_gather->pgsize = 0). Actually it is not necessary, so add a check to avoid invalid iotlb sync. Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> --- include/linux/iommu.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 9ca6e6b..6afa61b 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -529,6 +529,9 @@ static inline void iommu_flush_iotlb_all(struct iommu_domain *domain) static inline void iommu_iotlb_sync(struct iommu_domain *domain, struct iommu_iotlb_gather *iotlb_gather) { + if (!iotlb_gather->pgsize) + return; + if (domain->ops->iotlb_sync) domain->ops->iotlb_sync(domain, iotlb_gather); -- 2.8.1

4 5

[PATCH net-next 0/4] net: remove repeated words
by Huazhong Tan 30 Mar '21

30 Mar '21

This patch-set removes some repeated words in comments. Peng Li (4): net: i40e: remove repeated words net: bonding: remove repeated word net: phy: remove repeated word net: ipa: remove repeated words drivers/net/bonding/bond_alb.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_main.c | 4 ++-- drivers/net/ipa/ipa_endpoint.c | 4 ++-- drivers/net/phy/mdio_bus.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) -- 2.7.4

1 5

Re: [PATCH] libata: Increase the timeout of command ATA_CMD_READ_LOG_DMA_EXT
by chenxiang (M) 30 Mar '21

30 Mar '21

Ping.... 在 2020/10/15 9:57, chenxiang 写道: > From: Xiang Chen <chenxiang66(a)hisilicon.com> > > ATA_CMD_READ_LOG_DMA_EXT command normally uses the common internal command > default timeout (5s), and it is adequate in most situations. But it is not > enough for some disks such as ST4000NM0035 which causes qc timeout > sometimes as follows: > ... > [ 157.284284] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 > [ 157.290124] sas: ata8: end_device-4:0:2: dev error handler > [ 157.290128] sas: ata9: end_device-4:0:8: dev error handler > [ 157.290131] sas: ata10: end_device-4:0:11: dev error handler > [ 164.588391] ata9.00: qc timeout (cmd 0x47) > [ 164.588393] ata8.00: qc timeout (cmd 0x47) > [ 164.588395] ata10.00: qc timeout (cmd 0x47) > [ 166.582572] ata10.00: READ LOG DMA EXT failed, trying PIO > [ 166.587960] ata10.00: NCQ Send/Recv Log not supported > [ 166.592997] ata10.00: ATA-10: ST4000NM0035-1V4107, TN03, max UDMA/133 > [ 166.599414] ata10.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32) > [ 166.606011] ata10.00: failed to set xfermode (err_mask=0x40) > [ 166.659253] ata8.00: READ LOG DMA EXT failed, trying PIO > [ 166.664559] ata8.00: NCQ Send/Recv Log not supported > [ 166.669506] ata8.00: ATA-10: ST4000NM0035-1V4107, TN03, max UDMA/133 > [ 166.675837] ata8.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32) > [ 166.682343] ata8.00: failed to set xfermode (err_mask=0x40) > [ 166.743458] ata9.00: READ LOG DMA EXT failed, trying PIO > [ 166.748765] ata9.00: NCQ Send/Recv Log not supported > [ 166.753713] ata9.00: ATA-10: ST4000NM0035-1V4107, TN03, max UDMA/133 > [ 166.760045] ata9.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32) > [ 166.766553] ata9.00: failed to set xfermode (err_mask=0x40) > [ 168.886378] ata10.00: configured for UDMA/133 > [ 168.999943] ata8.00: configured for UDMA/133 > [ 169.050801] ata9.00: configured for UDMA/133 > [ 169.055071] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 > ... > Actually it may takes about 9s to complete the command for disk ST4000NM0035 > sometimes. So to avoid the issue, increase the timeout of command > ATA_CMD_READ_LOG_DMA_EXT from 5s to 15s. > > Signed-off-by: Xiang Chen <chenxiang66(a)hisilicon.com> > Reviewed-by: John Garry <john.garry(a)huawei.com> > --- > drivers/ata/libata-eh.c | 9 +++++++++ > include/linux/libata.h | 2 +- > 2 files changed, 10 insertions(+), 1 deletion(-) > > diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c > index 474c6c3..6db9474 100644 > --- a/drivers/ata/libata-eh.c > +++ b/drivers/ata/libata-eh.c > @@ -100,6 +100,13 @@ static const unsigned long ata_eh_flush_timeouts[] = { > ULONG_MAX, > }; > > +static const unsigned long ata_eh_read_log_ext_timeouts[] = { > + 15000, > + 15000, > + 30000, > + ULONG_MAX, > +}; > + > static const unsigned long ata_eh_other_timeouts[] = { > 5000, /* same rationale as identify timeout */ > 10000, /* ditto */ > @@ -139,6 +146,8 @@ ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { > .timeouts = ata_eh_other_timeouts, }, > { .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT), > .timeouts = ata_eh_flush_timeouts }, > + { .commands = CMDS(ATA_CMD_READ_LOG_DMA_EXT, ATA_CMD_READ_LOG_EXT), > + .timeouts = ata_eh_read_log_ext_timeouts }, > }; > #undef CMDS > > diff --git a/include/linux/libata.h b/include/linux/libata.h > index b0bd30e..bcc68b3 100644 > --- a/include/linux/libata.h > +++ b/include/linux/libata.h > @@ -390,7 +390,7 @@ enum { > /* This should match the actual table size of > * ata_eh_cmd_timeout_table in libata-eh.c. > */ > - ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6, > + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 7, > > /* Horkage types. May be set by libata or controller on drives > (some horkage may be drive/controller pair dependent */

1 0

[PATCH net-next 0/9] net: hns3: misc updates for -next
by Huazhong Tan 30 Mar '21

30 Mar '21

This series include some updates for the HNS3 ethernet driver. #1 & #2 fix two bugs in commit fc4243b8de8b ("net: hns3: refactor flow director configuration"). #3 modifies a potential overflow risk. #4 remove the rss_size limitation when updating rss size. #5 optimizes the resetting of tqp. #6 & #7 add updates for the IO path. #8 expands the tc config command. #9 adds a new stats. Guangbin Huang (1): net: hns3: remediate a potential overflow risk of bd_num_list Guojia Liao (1): net: hns3: expand the tc config command Jian Shen (3): net: hns3: fix missing rule state assignment net: hns3: fix use-after-free issue for hclge_add_fd_entry_common() net: hns3: remove the rss_size limitation by vector num Yufeng Mo (1): net: hns3: optimize the process of queue reset Yunsheng Lin (3): net: hns3: add handling for xmit skb with recursive fraglist net: hns3: add tx send size handling for tso skb net: hns3: add stats logging when skb padding fails drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 153 +++++++++----- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 9 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 2 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 8 +- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 219 ++++++++++++--------- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 3 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 26 ++- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 9 - .../ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.h | 7 +- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 62 ++++-- 11 files changed, 321 insertions(+), 179 deletions(-) -- 2.7.4

2 10

[PATCH v2] coresight: core: Fix typo in coresight-core.c
by Qi Liu 28 Mar '21

28 Mar '21

Fix the following checkpatch warning: WARNING: 'compoment' may be misspelled - perhaps 'component'? Fixes: 8e264c52e1da ("coresight: core: Allow the coresight core driver to be built as a module") Signed-off-by: Qi Liu <liuqi115(a)huawei.com> --- drivers/hwtracing/coresight/coresight-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 0062c89..b57bea1 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -86,7 +86,7 @@ static int coresight_id_match(struct device *dev, void *data) i_csdev->type != CORESIGHT_DEV_TYPE_SOURCE) return 0; - /* Get the source ID for both compoment */ + /* Get the source ID for both components */ trace_id = source_ops(csdev)->trace_id(csdev); i_trace_id = source_ops(i_csdev)->trace_id(i_csdev); -- 2.8.1

2 2

[PATCH 00/15] acpi: fix some coding style issues
by Xiaofei Tan 27 Mar '21

27 Mar '21

Fix some coding style issues reported by checkpatch.pl. Xiaofei Tan (15): ACPI: APD: fix a block comment align issue ACPI: processor: fix some coding style issues ACPI: acpi_dbg: fix some coding style issues ACPI: acpi_fpdt: replace __attribute__((packed)) by __packed remove useless return statement for void function ACPI: acpi_lpss: fix some coding style issues ACPI: acpi_memhotplug: fix a coding style issue ACPI: acpi_pad: fix a coding style issue ACPI: battery: fix some coding style issues ACPI: button: fix some coding style issues ACPI: cppc_acpi: fix some coding style issues ACPI: custom_method: fix a coding style issue ACPI: device_pm: fix some coding style issues ACPI: device_sysfs: fix some coding style issues ACPI: dock: fix some coding style issues drivers/acpi/acpi_apd.c | 8 ++--- drivers/acpi/acpi_dbg.c | 40 +++++++++++------------- drivers/acpi/acpi_fpdt.c | 6 ++-- drivers/acpi/acpi_ipmi.c | 1 - drivers/acpi/acpi_lpss.c | 4 ++- drivers/acpi/acpi_memhotplug.c | 2 +- drivers/acpi/acpi_pad.c | 4 +++ drivers/acpi/acpi_processor.c | 18 +++-------- drivers/acpi/battery.c | 64 +++++++++++++++++++++---------------- drivers/acpi/button.c | 10 +++--- drivers/acpi/cppc_acpi.c | 71 +++++++++++++++++++++--------------------- drivers/acpi/custom_method.c | 2 +- drivers/acpi/device_pm.c | 3 ++ drivers/acpi/device_sysfs.c | 15 ++++++--- drivers/acpi/dock.c | 7 +++-- 15 files changed, 138 insertions(+), 117 deletions(-) -- 2.8.1

3 19

[PATCH] sched/fair: Remove the redundant check in numa_id_core
by Tian Tao 27 Mar '21

27 Mar '21

the numa_idle_core() function have a little redundant. then this patch move the "idle_core >= 0" check in numa_idle_core() to its caller in update_numa_stats() and then remove the redundant check in !static_branch_likely(&sched_smt_present) check in numa_idle_core. Signed-off-by: Tian Tao <tiantao6(a)hisilicon.com> --- kernel/sched/fair.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index afb895a3..bae974a 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -1569,8 +1569,7 @@ numa_type numa_classify(unsigned int imbalance_pct, static inline bool test_idle_cores(int cpu, bool def); static inline int numa_idle_core(int idle_core, int cpu) { - if (!static_branch_likely(&sched_smt_present) || - idle_core >= 0 || !test_idle_cores(cpu, false)) + if (!test_idle_cores(cpu, false)) return idle_core; /* @@ -1622,7 +1621,8 @@ static void update_numa_stats(struct task_numa_env *env, if (ns->idle_cpu == -1) ns->idle_cpu = cpu; - idle_core = numa_idle_core(idle_core, cpu); + if (idle_core >= 0) + idle_core = numa_idle_core(idle_core, cpu); } } rcu_read_unlock(); -- 2.7.4

2 1

[PATCH for-next 0/5] RDMA/hns: Refactor and reorganization
by Weihang Li 27 Mar '21

27 Mar '21

Refactor the process of polling CQ and several control paths in the hns driver. Weihang Li (1): RDMA/hns: Refactor hns_roce_v2_poll_one() Xi Wang (3): RDMA/hns: Refactor reset state checking flow RDMA/hns: Reorganize process of setting HEM RDMA/hns: Simplify command fields for HEM base address configuration Yixing Liu (1): RDMA/hns: Reorganize hns_roce_create_cq() drivers/infiniband/hw/hns/hns_roce_cmd.c | 35 +- drivers/infiniband/hw/hns/hns_roce_cq.c | 87 ++- drivers/infiniband/hw/hns/hns_roce_device.h | 11 +- drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 2 +- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 971 +++++++++++++++------------- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 116 ++-- 6 files changed, 626 insertions(+), 596 deletions(-) -- 2.8.1

3 9

[PATCH net-next 0/9] net: hns3: add some cleanups
by Huazhong Tan 27 Mar '21

27 Mar '21

This series includes some cleanups for the HNS3 ethernet driver. Guojia Liao (1): net: hns3: split out hclge_tm_vport_tc_info_update() Huazhong Tan (3): net: hns3: remove unused parameter from hclge_dbg_dump_loopback() net: hns3: fix prototype warning net: hns3: fix some typos in hclge_main.c Jian Shen (1): net: hns3: remove unused code of vmdq Jiaran Zhang (1): net: hns3: remove redundant query in hclge_config_tm_hw_err_int() Peng Li (2): net: hns3: remove redundant blank lines net: hns3: remove unused parameter from hclge_set_vf_vlan_common() Yufeng Mo (1): net: hns3: split function hclge_reset_rebuild() drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 7 - drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 2 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 1 - .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 - .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 5 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 10 +- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 283 +++++++++------------ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 - .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 11 +- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c | 1 - .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 2 - .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 1 - 12 files changed, 130 insertions(+), 197 deletions(-) -- 2.7.4

2 10