When an event is not enabled in the build and thus the event's table is not present in the SQLite DB, then the DBI would detect exception and ras-mc-ctl exit without read and log remaining event's information. Following is the error log when the devlink_event is not enabled, "DBD::SQLite::db prepare failed: no such table: devlink_event at ./ras-mc-ctl line 1198. Can't call method "execute" on an undefined value at ./ras-mc-ctl line 1199" Add an extra check, whether an event is enabled in the build, before try reading the tables. Reported-by: Xiaofei Tan <tanxiaofei@huawei.com> Suggested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> --- configure.ac | 7 + util/ras-mc-ctl.in | 506 ++++++++++++++++++++++++--------------------- 2 files changed, 278 insertions(+), 235 deletions(-) diff --git a/configure.ac b/configure.ac index a6251d4..9893bb4 100644 --- a/configure.ac +++ b/configure.ac @@ -42,6 +42,7 @@ AC_SUBST([SQLITE3_LIBS]) AC_ARG_ENABLE([aer], AS_HELP_STRING([--enable-aer], [enable PCIe AER events (currently experimental)])) +AC_SUBST([enable_aer]) AS_IF([test "x$enable_aer" = "xyes" || test "x$enable_all" == "xyes"], [ AC_DEFINE(HAVE_AER,1,"have PCIe AER events collect") @@ -63,6 +64,7 @@ AM_COND_IF([WITH_NON_STANDARD], [USE_NON_STANDARD="yes"], [USE_NON_STANDARD="no" AC_ARG_ENABLE([arm], AS_HELP_STRING([--enable-arm], [enable ARM events (currently experimental)])) +AC_SUBST([enable_arm]) AS_IF([test "x$enable_arm" = "xyes" || test "x$enable_all" == "xyes"], [ AC_DEFINE(HAVE_ARM,1,"have ARM events collect") @@ -73,6 +75,7 @@ AM_COND_IF([WITH_ARM], [USE_ARM="yes"], [USE_ARM="no"]) AC_ARG_ENABLE([mce], AS_HELP_STRING([--enable-mce], [enable MCE events (currently experimental)])) +AC_SUBST([enable_mce]) AS_IF([test "x$enable_mce" = "xyes" || test "x$enable_all" == "xyes"], [ AC_DEFINE(HAVE_MCE,1,"have PCIe MCE events collect") @@ -83,6 +86,7 @@ AM_COND_IF([WITH_MCE], [USE_MCE="yes"], [USE_MCE="no"]) AC_ARG_ENABLE([extlog], AS_HELP_STRING([--enable-extlog], [enable EXTLOG events (currently experimental)])) +AC_SUBST([enable_extlog]) AS_IF([test "x$enable_extlog" = "xyes" || test "x$enable_all" == "xyes"], [ AC_DEFINE(HAVE_EXTLOG,1,"have EXTLOG events collect") @@ -93,6 +97,7 @@ AM_COND_IF([WITH_EXTLOG], [USE_EXTLOG="yes"], [USE_EXTLOG="no"]) AC_ARG_ENABLE([devlink], AS_HELP_STRING([--enable-devlink], [enable devlink health events (currently experimental)])) +AC_SUBST([enable_devlink]) AS_IF([test "x$enable_devlink" = "xyes" || test "x$enable_all" == "xyes"], [ AC_DEFINE(HAVE_DEVLINK,1,"have devlink health events collect") @@ -103,6 +108,7 @@ AM_COND_IF([WITH_DEVLINK], [USE_DEVLINK="yes"], [USE_DEVLINK="no"]) AC_ARG_ENABLE([diskerror], AS_HELP_STRING([--enable-diskerror], [enable disk I/O error events (currently experimental)])) +AC_SUBST([enable_diskerror]) AS_IF([test "x$enable_diskerror" = "xyes" || test "x$enable_all" == "xyes"], [ AC_DEFINE(HAVE_DISKERROR,1,"have disk I/O errors collect") @@ -113,6 +119,7 @@ AM_COND_IF([WITH_DISKERROR], [USE_DISKERROR="yes"], [USE_DISKERROR="no"]) AC_ARG_ENABLE([memory_failure], AS_HELP_STRING([--enable-memory-failure], [enable memory failure events (currently experimental)])) +AC_SUBST([enable_memory_failure]) AS_IF([test "x$enable_memory_failure" = "xyes" || test "x$enable_all" == "xyes"], [ AC_DEFINE(HAVE_MEMORY_FAILURE,1,"have memory failure events collect") diff --git a/util/ras-mc-ctl.in b/util/ras-mc-ctl.in index eebcc4e..97b1fa4 100755 --- a/util/ras-mc-ctl.in +++ b/util/ras-mc-ctl.in @@ -65,6 +65,14 @@ $conf{mbconfig} = "$sysconfdir/ras/mainboard"; my $status = 0; +my $enable_aer = "@enable_aer@"; +my $enable_arm = "@enable_arm@"; +my $enable_mce = "@enable_mce@"; +my $enable_extlog = "@enable_extlog@"; +my $enable_devlink = "@enable_devlink@"; +my $enable_diskerror = "@enable_diskerror@"; +my $enable_mem_failure = "@enable_memory_failure@"; + my $usage = <<EOF; Usage: $prog [OPTIONS...] --quiet Quiet operation. @@ -1144,118 +1152,132 @@ sub summary $query_handle->finish; # PCIe AER aer_event errors - $query = "select err_type, err_msg, count(*) from aer_event group by err_type, err_msg"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($err_type, $msg, $count)); - $out = ""; - while($query_handle->fetch()) { - $out .= "\t$count $err_type errors: $msg\n"; - } - if ($out ne "") { - print "PCIe AER events summary:\n$out\n"; - } else { - print "No PCIe AER errors.\n\n"; + if ($enable_aer eq "yes") { + $query = "select err_type, err_msg, count(*) from aer_event group by err_type, err_msg"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($err_type, $msg, $count)); + $out = ""; + while($query_handle->fetch()) { + $out .= "\t$count $err_type errors: $msg\n"; + } + if ($out ne "") { + print "PCIe AER events summary:\n$out\n"; + } else { + print "No PCIe AER errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # ARM processor arm_event errors - $query = "select mpidr, count(*) from arm_event group by mpidr"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($mpidr, $count)); - $out = ""; - while($query_handle->fetch()) { - $out .= sprintf "\tCPU(mpidr=0x%x) has %d errors\n", $mpidr, $count; - } - if ($out ne "") { - print "ARM processor events summary:\n$out\n"; - } else { - print "No ARM processor errors.\n\n"; + if ($enable_arm eq "yes") { + $query = "select mpidr, count(*) from arm_event group by mpidr"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($mpidr, $count)); + $out = ""; + while($query_handle->fetch()) { + $out .= sprintf "\tCPU(mpidr=0x%x) has %d errors\n", $mpidr, $count; + } + if ($out ne "") { + print "ARM processor events summary:\n$out\n"; + } else { + print "No ARM processor errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # extlog errors - $query = "select etype, severity, count(*) from extlog_event group by etype, severity"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($etype, $severity, $count)); - $out = ""; - while($query_handle->fetch()) { - $etype_string = get_extlog_type($etype); - $severity_string = get_extlog_severity($severity); - $out .= "\t$count $etype_string $severity_string errors\n"; - } - if ($out ne "") { - print "Extlog records summary:\n$out"; - } else { - print "No Extlog errors.\n\n"; + if ($enable_extlog eq "yes") { + $query = "select etype, severity, count(*) from extlog_event group by etype, severity"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($etype, $severity, $count)); + $out = ""; + while($query_handle->fetch()) { + $etype_string = get_extlog_type($etype); + $severity_string = get_extlog_severity($severity); + $out .= "\t$count $etype_string $severity_string errors\n"; + } + if ($out ne "") { + print "Extlog records summary:\n$out"; + } else { + print "No Extlog errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # devlink errors - $query = "select dev_name, count(*) from devlink_event group by dev_name"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($dev_name, $count)); - $out = ""; - while($query_handle->fetch()) { - $out .= "\t$dev_name has $count errors\n"; - } - if ($out ne "") { - print "Devlink records summary:\n$out"; - } else { - print "No devlink errors.\n"; + if ($enable_devlink eq "yes") { + $query = "select dev_name, count(*) from devlink_event group by dev_name"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($dev_name, $count)); + $out = ""; + while($query_handle->fetch()) { + $out .= "\t$dev_name has $count errors\n"; + } + if ($out ne "") { + print "Devlink records summary:\n$out"; + } else { + print "No devlink errors.\n"; + } + $query_handle->finish; } - $query_handle->finish; # Disk errors - $query = "select dev, count(*) from disk_errors group by dev"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($dev, $count)); - $out = ""; - while($query_handle->fetch()) { - $out .= "\t$dev has $count errors\n"; - } - if ($out ne "") { - print "Disk errors summary:\n$out"; - } else { - print "No disk errors.\n"; + if ($enable_diskerror eq "yes") { + $query = "select dev, count(*) from disk_errors group by dev"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($dev, $count)); + $out = ""; + while($query_handle->fetch()) { + $out .= "\t$dev has $count errors\n"; + } + if ($out ne "") { + print "Disk errors summary:\n$out"; + } else { + print "No disk errors.\n"; + } + $query_handle->finish; } - $query_handle->finish; # Memory failure errors - $query = "select action_result, count(*) from memory_failure_event group by action_result"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($action_result, $count)); - $out = ""; - while($query_handle->fetch()) { - $out .= "\t$action_result errors: $count\n"; - } - if ($out ne "") { - print "Memory failure events summary:\n$out\n"; - } else { - print "No Memory failure errors.\n\n"; + if ($enable_mem_failure eq "yes") { + $query = "select action_result, count(*) from memory_failure_event group by action_result"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($action_result, $count)); + $out = ""; + while($query_handle->fetch()) { + $out .= "\t$action_result errors: $count\n"; + } + if ($out ne "") { + print "Memory failure events summary:\n$out\n"; + } else { + print "No Memory failure errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # MCE mce_record errors - $query = "select error_msg, count(*) from mce_record group by error_msg"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($msg, $count)); - $out = ""; - while($query_handle->fetch()) { - $out .= "\t$count $msg errors\n"; - } - if ($out ne "") { - print "MCE records summary:\n$out"; - } else { - print "No MCE errors.\n"; + if ($enable_mce eq "yes") { + $query = "select error_msg, count(*) from mce_record group by error_msg"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($msg, $count)); + $out = ""; + while($query_handle->fetch()) { + $out .= "\t$count $msg errors\n"; + } + if ($out ne "") { + print "MCE records summary:\n$out"; + } else { + print "No MCE errors.\n"; + } + $query_handle->finish; } - $query_handle->finish; undef($dbh); } @@ -1294,167 +1316,181 @@ sub errors $query_handle->finish; # PCIe AER aer_event errors - $query = "select id, timestamp, dev_name, err_type, err_msg from aer_event order by id"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($id, $time, $devname, $type, $msg)); - $out = ""; - while($query_handle->fetch()) { - $out .= "$id $time $devname $type error: $msg\n"; - } - if ($out ne "") { - print "PCIe AER events:\n$out\n"; - } else { - print "No PCIe AER errors.\n\n"; + if ($enable_aer eq "yes") { + $query = "select id, timestamp, dev_name, err_type, err_msg from aer_event order by id"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($id, $time, $devname, $type, $msg)); + $out = ""; + while($query_handle->fetch()) { + $out .= "$id $time $devname $type error: $msg\n"; + } + if ($out ne "") { + print "PCIe AER events:\n$out\n"; + } else { + print "No PCIe AER errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # ARM processor arm_event errors - $query = "select id, timestamp, error_count, affinity, mpidr, running_state, psci_state from arm_event order by id"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($id, $timestamp, $error_count, $affinity, $mpidr, $r_state, $psci_state)); - $out = ""; - while($query_handle->fetch()) { - $out .= "$id $timestamp error: "; - $out .= "error_count=$error_count, " if ($error_count); - $out .= "affinity_level=$affinity, "; - $out .= sprintf "mpidr=0x%x, ", $mpidr; - $out .= sprintf "running_state=0x%x, ", $r_state; - $out .= sprintf "psci_state=0x%x", $psci_state; - $out .= "\n"; - } - if ($out ne "") { - print "ARM processor events:\n$out\n"; - } else { - print "No ARM processor errors.\n\n"; + if ($enable_arm eq "yes") { + $query = "select id, timestamp, error_count, affinity, mpidr, running_state, psci_state from arm_event order by id"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($id, $timestamp, $error_count, $affinity, $mpidr, $r_state, $psci_state)); + $out = ""; + while($query_handle->fetch()) { + $out .= "$id $timestamp error: "; + $out .= "error_count=$error_count, " if ($error_count); + $out .= "affinity_level=$affinity, "; + $out .= sprintf "mpidr=0x%x, ", $mpidr; + $out .= sprintf "running_state=0x%x, ", $r_state; + $out .= sprintf "psci_state=0x%x", $psci_state; + $out .= "\n"; + } + if ($out ne "") { + print "ARM processor events:\n$out\n"; + } else { + print "No ARM processor errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # Extlog errors - $query = "select id, timestamp, etype, severity, address, fru_id, fru_text, cper_data from extlog_event order by id"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($id, $timestamp, $etype, $severity, $addr, $fru_id, $fru_text, $cper_data)); - $out = ""; - while($query_handle->fetch()) { - $etype_string = get_extlog_type($etype); - $severity_string = get_extlog_severity($severity); - $out .= "$id $timestamp error: "; - $out .= "type=$etype_string, "; - $out .= "severity=$severity_string, "; - $out .= sprintf "address=0x%08x, ", $addr; - $out .= sprintf "fru_id=%s, ", get_uuid_le($fru_id); - $out .= "fru_text='$fru_text', "; - $out .= get_cper_data_text($cper_data) if ($cper_data); - $out .= "\n"; - } - if ($out ne "") { - print "Extlog events:\n$out\n"; - } else { - print "No Extlog errors.\n\n"; + if ($enable_extlog eq "yes") { + $query = "select id, timestamp, etype, severity, address, fru_id, fru_text, cper_data from extlog_event order by id"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($id, $timestamp, $etype, $severity, $addr, $fru_id, $fru_text, $cper_data)); + $out = ""; + while($query_handle->fetch()) { + $etype_string = get_extlog_type($etype); + $severity_string = get_extlog_severity($severity); + $out .= "$id $timestamp error: "; + $out .= "type=$etype_string, "; + $out .= "severity=$severity_string, "; + $out .= sprintf "address=0x%08x, ", $addr; + $out .= sprintf "fru_id=%s, ", get_uuid_le($fru_id); + $out .= "fru_text='$fru_text', "; + $out .= get_cper_data_text($cper_data) if ($cper_data); + $out .= "\n"; + } + if ($out ne "") { + print "Extlog events:\n$out\n"; + } else { + print "No Extlog errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # devlink errors - $query = "select id, timestamp, bus_name, dev_name, driver_name, reporter_name, msg from devlink_event order by id"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($id, $timestamp, $bus_name, $dev_name, $driver_name, $reporter_name, $msg)); - $out = ""; - while($query_handle->fetch()) { - $out .= "$id $timestamp error: "; - $out .= "bus_name=$bus_name, "; - $out .= "dev_name=$dev_name, "; - $out .= "driver_name=$driver_name, "; - $out .= "reporter_name=$reporter_name, "; - $out .= "message='$msg', "; - $out .= "\n"; - } - if ($out ne "") { - print "Devlink events:\n$out\n"; - } else { - print "No devlink errors.\n\n"; + if ($enable_devlink eq "yes") { + $query = "select id, timestamp, bus_name, dev_name, driver_name, reporter_name, msg from devlink_event order by id"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($id, $timestamp, $bus_name, $dev_name, $driver_name, $reporter_name, $msg)); + $out = ""; + while($query_handle->fetch()) { + $out .= "$id $timestamp error: "; + $out .= "bus_name=$bus_name, "; + $out .= "dev_name=$dev_name, "; + $out .= "driver_name=$driver_name, "; + $out .= "reporter_name=$reporter_name, "; + $out .= "message='$msg', "; + $out .= "\n"; + } + if ($out ne "") { + print "Devlink events:\n$out\n"; + } else { + print "No devlink errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # Disk errors - $query = "select id, timestamp, dev, sector, nr_sector, error, rwbs, cmd from disk_errors order by id"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($id, $timestamp, $dev, $sector, $nr_sector, $error, $rwbs, $cmd)); - $out = ""; - while($query_handle->fetch()) { - $out .= "$id $timestamp error: "; - $out .= "dev=$dev, "; - $out .= "sector=$sector, "; - $out .= "nr_sector=$nr_sector, "; - $out .= "error='$error', "; - $out .= "rwbs='$rwbs', "; - $out .= "cmd='$cmd', "; - $out .= "\n"; - } - if ($out ne "") { - print "Disk errors\n$out\n"; - } else { - print "No disk errors.\n\n"; + if ($enable_diskerror eq "yes") { + $query = "select id, timestamp, dev, sector, nr_sector, error, rwbs, cmd from disk_errors order by id"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($id, $timestamp, $dev, $sector, $nr_sector, $error, $rwbs, $cmd)); + $out = ""; + while($query_handle->fetch()) { + $out .= "$id $timestamp error: "; + $out .= "dev=$dev, "; + $out .= "sector=$sector, "; + $out .= "nr_sector=$nr_sector, "; + $out .= "error='$error', "; + $out .= "rwbs='$rwbs', "; + $out .= "cmd='$cmd', "; + $out .= "\n"; + } + if ($out ne "") { + print "Disk errors\n$out\n"; + } else { + print "No disk errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # Memory failure errors - $query = "select id, timestamp, pfn, page_type, action_result from memory_failure_event order by id"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($id, $timestamp, $pfn, $page_type, $action_result)); - $out = ""; - while($query_handle->fetch()) { - $out .= "$id $timestamp error: "; - $out .= "pfn=$pfn, page_type=$page_type, action_result=$action_result\n"; - } - if ($out ne "") { - print "Memory failure events:\n$out\n"; - } else { - print "No Memory failure errors.\n\n"; + if ($enable_mem_failure eq "yes") { + $query = "select id, timestamp, pfn, page_type, action_result from memory_failure_event order by id"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($id, $timestamp, $pfn, $page_type, $action_result)); + $out = ""; + while($query_handle->fetch()) { + $out .= "$id $timestamp error: "; + $out .= "pfn=$pfn, page_type=$page_type, action_result=$action_result\n"; + } + if ($out ne "") { + print "Memory failure events:\n$out\n"; + } else { + print "No Memory failure errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; # MCE mce_record errors - $query = "select id, timestamp, mcgcap, mcgstatus, status, addr, misc, ip, tsc, walltime, cpu, cpuid, apicid, socketid, cs, bank, cpuvendor, bank_name, error_msg, mcgstatus_msg, mcistatus_msg, user_action, mc_location from mce_record order by id"; - $query_handle = $dbh->prepare($query); - $query_handle->execute(); - $query_handle->bind_columns(\($id, $time, $mcgcap,$mcgstatus, $status, $addr, $misc, $ip, $tsc, $walltime, $cpu, $cpuid, $apicid, $socketid, $cs, $bank, $cpuvendor, $bank_name, $msg, $mcgstatus_msg, $mcistatus_msg, $user_action, $mc_location)); - $out = ""; - while($query_handle->fetch()) { - $out .= "$id $time error: $msg"; - $out .= ", CPU $cpuvendor" if ($cpuvendor); - $out .= ", bank $bank_name" if ($bank_name); - $out .= ", mcg $mcgstatus_msg" if ($mcgstatus_msg); - $out .= ", mci $mcistatus_msg" if ($mcistatus_msg); - $out .= ", $mc_location" if ($mc_location); - $out .= ", $user_action" if ($user_action); - $out .= sprintf ", mcgcap=0x%08x", $mcgcap if ($mcgcap); - $out .= sprintf ", mcgstatus=0x%08x", $mcgstatus if ($mcgstatus); - $out .= sprintf ", status=0x%08x", $status if ($status); - $out .= sprintf ", addr=0x%08x", $addr if ($addr); - $out .= sprintf ", misc=0x%08x", $misc if ($misc); - $out .= sprintf ", ip=0x%08x", $ip if ($ip); - $out .= sprintf ", tsc=0x%08x", $tsc if ($tsc); - $out .= sprintf ", walltime=0x%08x", $walltime if ($walltime); - $out .= sprintf ", cpu=0x%08x", $cpu if ($cpu); - $out .= sprintf ", cpuid=0x%08x", $cpuid if ($cpuid); - $out .= sprintf ", apicid=0x%08x", $apicid if ($apicid); - $out .= sprintf ", socketid=0x%08x", $socketid if ($socketid); - $out .= sprintf ", cs=0x%08x", $cs if ($cs); - $out .= sprintf ", bank=0x%08x", $bank if ($bank); - - $out .= "\n"; - } - if ($out ne "") { - print "MCE events:\n$out\n"; - } else { - print "No MCE errors.\n\n"; + if ($enable_mce eq "yes") { + $query = "select id, timestamp, mcgcap, mcgstatus, status, addr, misc, ip, tsc, walltime, cpu, cpuid, apicid, socketid, cs, bank, cpuvendor, bank_name, error_msg, mcgstatus_msg, mcistatus_msg, user_action, mc_location from mce_record order by id"; + $query_handle = $dbh->prepare($query); + $query_handle->execute(); + $query_handle->bind_columns(\($id, $time, $mcgcap,$mcgstatus, $status, $addr, $misc, $ip, $tsc, $walltime, $cpu, $cpuid, $apicid, $socketid, $cs, $bank, $cpuvendor, $bank_name, $msg, $mcgstatus_msg, $mcistatus_msg, $user_action, $mc_location)); + $out = ""; + while($query_handle->fetch()) { + $out .= "$id $time error: $msg"; + $out .= ", CPU $cpuvendor" if ($cpuvendor); + $out .= ", bank $bank_name" if ($bank_name); + $out .= ", mcg $mcgstatus_msg" if ($mcgstatus_msg); + $out .= ", mci $mcistatus_msg" if ($mcistatus_msg); + $out .= ", $mc_location" if ($mc_location); + $out .= ", $user_action" if ($user_action); + $out .= sprintf ", mcgcap=0x%08x", $mcgcap if ($mcgcap); + $out .= sprintf ", mcgstatus=0x%08x", $mcgstatus if ($mcgstatus); + $out .= sprintf ", status=0x%08x", $status if ($status); + $out .= sprintf ", addr=0x%08x", $addr if ($addr); + $out .= sprintf ", misc=0x%08x", $misc if ($misc); + $out .= sprintf ", ip=0x%08x", $ip if ($ip); + $out .= sprintf ", tsc=0x%08x", $tsc if ($tsc); + $out .= sprintf ", walltime=0x%08x", $walltime if ($walltime); + $out .= sprintf ", cpu=0x%08x", $cpu if ($cpu); + $out .= sprintf ", cpuid=0x%08x", $cpuid if ($cpuid); + $out .= sprintf ", apicid=0x%08x", $apicid if ($apicid); + $out .= sprintf ", socketid=0x%08x", $socketid if ($socketid); + $out .= sprintf ", cs=0x%08x", $cs if ($cs); + $out .= sprintf ", bank=0x%08x", $bank if ($bank); + + $out .= "\n"; + } + if ($out ne "") { + print "MCE events:\n$out\n"; + } else { + print "No MCE errors.\n\n"; + } + $query_handle->finish; } - $query_handle->finish; undef($dbh); } -- 2.17.1