From: Vaishnav Achath <vaishnav.a@ti.com> stable inclusion from stable-v6.6.2 commit 8645b8fcf1312b6b741a6d847a7d25e8c9c27332 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8IW7G Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 2d9f4877988f64f0f336983de65c365b6a7debfb ] A hardcoded reference clock of 48 MHz is used to calculate the clock divisor values, but the reference clock frequency can be different across devices and can be configured which can cause a mismatch between the reported frequency and actual SPI clock frequency observed. Fix this by fetching the clock rate from the clock provider and falling back to hardcoded reference only if the clock is not supplied. Fixes: 2cd7d393f461 ("arm64: dts: ti: k3-am654: Add McSPI DT nodes") Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230926113812.30692-1-vaishnav.a@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/spi/spi-omap2-mcspi.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 79888e6c54c2..ddf1c684bcc7 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -125,10 +125,12 @@ struct omap2_mcspi { struct omap2_mcspi_dma *dma_channels; struct device *dev; struct omap2_mcspi_regs ctx; + struct clk *ref_clk; int fifo_depth; bool target_aborted; unsigned int pin_dir:1; size_t max_xfer_len; + u32 ref_clk_hz; }; struct omap2_mcspi_cs { @@ -880,12 +882,12 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) return count - c; } -static u32 omap2_mcspi_calc_divisor(u32 speed_hz) +static u32 omap2_mcspi_calc_divisor(u32 speed_hz, u32 ref_clk_hz) { u32 div; for (div = 0; div < 15; div++) - if (speed_hz >= (OMAP2_MCSPI_MAX_FREQ >> div)) + if (speed_hz >= (ref_clk_hz >> div)) return div; return 15; @@ -897,7 +899,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi, { struct omap2_mcspi_cs *cs = spi->controller_state; struct omap2_mcspi *mcspi; - u32 l = 0, clkd = 0, div, extclk = 0, clkg = 0; + u32 ref_clk_hz, l = 0, clkd = 0, div, extclk = 0, clkg = 0; u8 word_len = spi->bits_per_word; u32 speed_hz = spi->max_speed_hz; @@ -911,14 +913,15 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi, if (t && t->speed_hz) speed_hz = t->speed_hz; - speed_hz = min_t(u32, speed_hz, OMAP2_MCSPI_MAX_FREQ); - if (speed_hz < (OMAP2_MCSPI_MAX_FREQ / OMAP2_MCSPI_MAX_DIVIDER)) { - clkd = omap2_mcspi_calc_divisor(speed_hz); - speed_hz = OMAP2_MCSPI_MAX_FREQ >> clkd; + ref_clk_hz = mcspi->ref_clk_hz; + speed_hz = min_t(u32, speed_hz, ref_clk_hz); + if (speed_hz < (ref_clk_hz / OMAP2_MCSPI_MAX_DIVIDER)) { + clkd = omap2_mcspi_calc_divisor(speed_hz, ref_clk_hz); + speed_hz = ref_clk_hz >> clkd; clkg = 0; } else { - div = (OMAP2_MCSPI_MAX_FREQ + speed_hz - 1) / speed_hz; - speed_hz = OMAP2_MCSPI_MAX_FREQ / div; + div = (ref_clk_hz + speed_hz - 1) / speed_hz; + speed_hz = ref_clk_hz / div; clkd = (div - 1) & 0xf; extclk = (div - 1) >> 4; clkg = OMAP2_MCSPI_CHCONF_CLKG; @@ -1448,8 +1451,6 @@ static int omap2_mcspi_probe(struct platform_device *pdev) ctlr->cleanup = omap2_mcspi_cleanup; ctlr->target_abort = omap2_mcspi_target_abort; ctlr->dev.of_node = node; - ctlr->max_speed_hz = OMAP2_MCSPI_MAX_FREQ; - ctlr->min_speed_hz = OMAP2_MCSPI_MAX_FREQ >> 15; ctlr->use_gpio_descriptors = true; platform_set_drvdata(pdev, ctlr); @@ -1519,6 +1520,14 @@ static int omap2_mcspi_probe(struct platform_device *pdev) goto free_ctlr; } + mcspi->ref_clk = devm_clk_get_optional_enabled(&pdev->dev, NULL); + if (mcspi->ref_clk) + mcspi->ref_clk_hz = clk_get_rate(mcspi->ref_clk); + else + mcspi->ref_clk_hz = OMAP2_MCSPI_MAX_FREQ; + ctlr->max_speed_hz = mcspi->ref_clk_hz; + ctlr->min_speed_hz = mcspi->ref_clk_hz >> 15; + pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); pm_runtime_enable(&pdev->dev); -- 2.25.1