From: Dirk Behme <dirk.behme@de.bosch.com> stable inclusion from stable-v6.6.2 commit ca781d499d3d977909db0e2183e18f63bcd549e6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8IW7G Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit d5252d9697a3e7007c741e9c103073868955a304 ] The clock dividers might be used with clock stop bit enabled or not. Current tables only support recommended values from the datasheet. This might result in warnings like below because no valid clock divider is found. Resulting in a 0 divider. There are Renesas ARM Trusted Firmware version out there which e.g. configure 0x201 (shifted logical right by 2: 0x80) and with this match the added { STPnHCK | 0, 1 }: https://github.com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.3/dri... ------------[ cut here ]------------ sd1h: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set WARNING: CPU: 1 PID: 1 at drivers/clk/clk-divider.c:141 divider_recalc_rate+0x48/0x70 Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.52 #1 Hardware name: Custom board based on r8a7796 (DT) pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : divider_recalc_rate+0x48/0x70 ... ------------[ cut here ]------------ Fixes: bb6d3fa98a41 ("clk: renesas: rcar-gen3: Switch to new SD clock handling") Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> [wsa: extended the table to 5 entries, added comments, reword commit message a little] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230928080317.28224-1-wsa+renesas@sang-engineerin... Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- drivers/clk/renesas/rcar-cpg-lib.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/clk/renesas/rcar-cpg-lib.c b/drivers/clk/renesas/rcar-cpg-lib.c index e2e0447de190..5a15f8788b92 100644 --- a/drivers/clk/renesas/rcar-cpg-lib.c +++ b/drivers/clk/renesas/rcar-cpg-lib.c @@ -70,8 +70,21 @@ void cpg_simple_notifier_register(struct raw_notifier_head *notifiers, #define STPnHCK BIT(9 - SDnSRCFC_SHIFT) static const struct clk_div_table cpg_sdh_div_table[] = { + /* + * These values are recommended by the datasheet. Because they come + * first, Linux will only use these. + */ { 0, 1 }, { 1, 2 }, { STPnHCK | 2, 4 }, { STPnHCK | 3, 8 }, - { STPnHCK | 4, 16 }, { 0, 0 }, + { STPnHCK | 4, 16 }, + /* + * These values are not recommended because STPnHCK is wrong. But they + * have been seen because of broken firmware. So, we support reading + * them but Linux will sanitize them when initializing through + * recalc_rate. + */ + { STPnHCK | 0, 1 }, { STPnHCK | 1, 2 }, { 2, 4 }, { 3, 8 }, { 4, 16 }, + /* Sentinel */ + { 0, 0 } }; struct clk * __init cpg_sdh_clk_register(const char *name, -- 2.25.1