From: Konrad Dybcio <konrad.dybcio@linaro.org> stable inclusion from stable-v6.6.2 commit 46a5ced7f68b7924cb76417564c2846f8b501ec4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8IW7G Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=... -------------------------------- [ Upstream commit 31bee70793b67f4b428825434542afc72ddb2b3b ] Commit b4fe47d12f1f ("arm64: dts: qcom: qrb2210-rb1: Add regulators") introduced regulator settings that were never put in place, as all of the properties ended 'microvolts' instead of 'microvolt' (which dt schema did not check for back then). Fix the microvolts-microvolt typo and adjust voltage ranges where it's necessary to fit within the volt = base + n*step formula. Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: b4fe47d12f1f ("arm64: dts: qcom: qrb2210-rb1: Add regulators") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230906-topic-rb1_features_sans_icc-v1-2-e92ce6fb... Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> --- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 86 ++++++++++++------------ 1 file changed, 43 insertions(+), 43 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 5cda5b761455..0f7c59187896 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -150,15 +150,15 @@ regulators { pm2250_s3: s3 { /* 0.4V-1.6625V -> 1.3V (Power tree requirements) */ - regulator-min-microvolts = <1350000>; - regulator-max-microvolts = <1350000>; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; regulator-boot-on; }; pm2250_s4: s4 { /* 1.2V-2.35V -> 2.05V (Power tree requirements) */ - regulator-min-microvolts = <2072000>; - regulator-max-microvolts = <2072000>; + regulator-min-microvolt = <2072000>; + regulator-max-microvolt = <2072000>; regulator-boot-on; }; @@ -166,47 +166,47 @@ pm2250_s4: s4 { pm2250_l2: l2 { /* LPDDR4X VDD2 */ - regulator-min-microvolts = <1136000>; - regulator-max-microvolts = <1136000>; + regulator-min-microvolt = <1136000>; + regulator-max-microvolt = <1136000>; regulator-always-on; regulator-boot-on; }; pm2250_l3: l3 { /* LPDDR4X VDDQ */ - regulator-min-microvolts = <616000>; - regulator-max-microvolts = <616000>; + regulator-min-microvolt = <616000>; + regulator-max-microvolt = <616000>; regulator-always-on; regulator-boot-on; }; pm2250_l4: l4 { - /* max = 3.05V -> max = just below 3V (SDHCI2) */ - regulator-min-microvolts = <1648000>; - regulator-max-microvolts = <2992000>; + /* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2700000>; regulator-allow-set-load; }; pm2250_l5: l5 { /* CSI/DSI */ - regulator-min-microvolts = <1232000>; - regulator-max-microvolts = <1232000>; + regulator-min-microvolt = <1232000>; + regulator-max-microvolt = <1232000>; regulator-allow-set-load; regulator-boot-on; }; pm2250_l6: l6 { /* DRAM PLL */ - regulator-min-microvolts = <928000>; - regulator-max-microvolts = <928000>; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <928000>; regulator-always-on; regulator-boot-on; }; pm2250_l7: l7 { /* Wi-Fi CX/MX */ - regulator-min-microvolts = <664000>; - regulator-max-microvolts = <664000>; + regulator-min-microvolt = <664000>; + regulator-max-microvolt = <664000>; }; /* @@ -216,37 +216,37 @@ pm2250_l7: l7 { pm2250_l10: l10 { /* Wi-Fi RFA */ - regulator-min-microvolts = <1300000>; - regulator-max-microvolts = <1300000>; + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; }; pm2250_l11: l11 { /* GPS RF1 */ - regulator-min-microvolts = <1000000>; - regulator-max-microvolts = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; regulator-boot-on; }; pm2250_l12: l12 { /* USB PHYs */ - regulator-min-microvolts = <928000>; - regulator-max-microvolts = <928000>; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <928000>; regulator-allow-set-load; regulator-boot-on; }; pm2250_l13: l13 { /* USB/QFPROM/PLLs */ - regulator-min-microvolts = <1800000>; - regulator-max-microvolts = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-allow-set-load; regulator-boot-on; }; pm2250_l14: l14 { /* SDHCI1 VQMMC */ - regulator-min-microvolts = <1800000>; - regulator-max-microvolts = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-allow-set-load; /* Broken hardware, never turn it off! */ regulator-always-on; @@ -254,8 +254,8 @@ pm2250_l14: l14 { pm2250_l15: l15 { /* WCD/DSI/BT VDDIO */ - regulator-min-microvolts = <1800000>; - regulator-max-microvolts = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-allow-set-load; regulator-always-on; regulator-boot-on; @@ -263,47 +263,47 @@ pm2250_l15: l15 { pm2250_l16: l16 { /* GPS RF2 */ - regulator-min-microvolts = <1800000>; - regulator-max-microvolts = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; }; pm2250_l17: l17 { - regulator-min-microvolts = <3000000>; - regulator-max-microvolts = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; }; pm2250_l18: l18 { /* VDD_PXn */ - regulator-min-microvolts = <1800000>; - regulator-max-microvolts = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; pm2250_l19: l19 { /* VDD_PXn */ - regulator-min-microvolts = <1800000>; - regulator-max-microvolts = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; pm2250_l20: l20 { /* SDHCI1 VMMC */ - regulator-min-microvolts = <2856000>; - regulator-max-microvolts = <2856000>; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; regulator-allow-set-load; }; pm2250_l21: l21 { /* SDHCI2 VMMC */ - regulator-min-microvolts = <2960000>; - regulator-max-microvolts = <3300000>; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3300000>; regulator-allow-set-load; regulator-boot-on; }; pm2250_l22: l22 { /* Wi-Fi */ - regulator-min-microvolts = <3312000>; - regulator-max-microvolts = <3312000>; + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; }; }; }; -- 2.25.1