June 2020 - Qa - mailweb.openeuler.org

Re: [Virt-Test] Add some patches for openEuler virtualization base on tp-qemu
by Chenqun (kuhn) 30 Jun '20

30 Jun '20

Add attachment patches Thanks. Chen Qun >-----Original Message----- >From: Chenqun (kuhn) >Sent: Tuesday, June 30, 2020 6:21 PM >To: dev(a)openeuler.org; qa(a)openeuler.org >Cc: Chenzhendong (alex) <alex.chen(a)huawei.com>; Zhanghailiang ><zhang.zhanghailiang(a)huawei.com>; Pannengyuan ><pannengyuan(a)huawei.com>; Kezhiming <kezhiming(a)huawei.com>; >Wangshengfang <wangshengfang(a)huawei.com>; Zhangxiaofeng (F) ><victor.zhangxiaofeng(a)huawei.com>; tangjie (A) <tangjie18(a)huawei.com> >Subject: [Virt-Test] Add some patches for openEuler virtualization base on tp- >qemu > >Hi All, > > The tp-qemu is a set of very open source virtualization test cases for qemu and >OpenVSwitch. > Unfortunately, it do not support openEuler and very unfriendly to aarch64 >support. > This serials is to adapt to openEuler and aarch64. There are a total of 16 >patches here. > > We plan to put the tp-qemu in the openEuler community and maintain it for a >long time. > Of course, we will also try to push it to upstream, so that upstream supports >openEuler well. > > The upstream source repository： > https://github.com/autotest/tp-qemu > >Chen Qun (5): > watchdog: check watchdog device need machine for aarch64 > numa_opts: uses smp_override instead of vcpu_maxcpus for aarch64 > numa_maxnodes: set maxnode from 128 to 32. > provider/qemu_version: add qemu_version version_compare function > qmp_command: add qmp 'node-name' expect value for blockdev > >Jie Tang (9): > cpu_device_hotplug_maximum: The value of machine_type getted from > machines.cfg is incorrect on arm. > cpu_device_hotplug: aarch64 do not support vcpu hot-unplug by now. > cpu_hotplug: aarch64 use vm.hotplug_vcpu_device to hotplug vcpu. > cpu_hotplug: autotest module is no longer supported, remove it. > cpu_hotplug: if default irq(15) not exist, need verify another. > cpu_hotplug: can not offline all cpus. > cpu_device_hotplug: Add 'aarch64' to supported platform in > cpu_device_hotplug.cfg. > cpu_hotplug: add more tests for vcpu hot-plug in cpu-hotplug.cfg. > cpu_device_hotplug_maximum: verify max vcpus need hotplug. > >Wang Ziming (2): > hotplug_mem.cfg: edit threshold adapt to arm64-pci machine type. > hotplug_mem: Increase sub_test_wait_time > >Thanks. >Chen Qun >

1 0

[Virt-Test] Add some patches for openEuler virtualization base on tp-qemu
by Chenqun (kuhn) 30 Jun '20

30 Jun '20

Hi All, The tp-qemu is a set of very open source virtualization test cases for qemu and OpenVSwitch. Unfortunately, it do not support openEuler and very unfriendly to aarch64 support. This serials is to adapt to openEuler and aarch64. There are a total of 16 patches here. We plan to put the tp-qemu in the openEuler community and maintain it for a long time. Of course, we will also try to push it to upstream, so that upstream supports openEuler well. The upstream source repository： https://github.com/autotest/tp-qemu Chen Qun (5): watchdog: check watchdog device need machine for aarch64 numa_opts: uses smp_override instead of vcpu_maxcpus for aarch64 numa_maxnodes: set maxnode from 128 to 32. provider/qemu_version: add qemu_version version_compare function qmp_command: add qmp 'node-name' expect value for blockdev Jie Tang (9): cpu_device_hotplug_maximum: The value of machine_type getted from machines.cfg is incorrect on arm. cpu_device_hotplug: aarch64 do not support vcpu hot-unplug by now. cpu_hotplug: aarch64 use vm.hotplug_vcpu_device to hotplug vcpu. cpu_hotplug: autotest module is no longer supported, remove it. cpu_hotplug: if default irq(15) not exist, need verify another. cpu_hotplug: can not offline all cpus. cpu_device_hotplug: Add 'aarch64' to supported platform in cpu_device_hotplug.cfg. cpu_hotplug: add more tests for vcpu hot-plug in cpu-hotplug.cfg. cpu_device_hotplug_maximum: verify max vcpus need hotplug. Wang Ziming (2): hotplug_mem.cfg: edit threshold adapt to arm64-pci machine type. hotplug_mem: Increase sub_test_wait_time Thanks. Chen Qun

1 0

[Virt-Test] Add some patches for openEuler virtualization base on tp-libvirt
by Chenqun (kuhn) 30 Jun '20

30 Jun '20

Hi All, The tp-libvirt is a set of very open source virtualization test cases for libvirt and qemu. Unfortunately, it do not support openEuler and very unfriendly to aarch64 support. This serials is to adapt to openEuler and aarch64. There are a total of 77 patches here. We plan to put the tp-libvirt in the openEuler community and maintain it for a long time. Of course, we will also try to push it to upstream, so that upstream supports openEuler well. The upstream source repository： https://github.com/autotest/tp-libvirt Chen Qun (18): libvirt_hugepage: set static_hugepage nums 4096 vcpu_affinity: change err_msg for vcpu_affinity virsh_domxml_to_native: add arch_bin '/usr/libexec/qemu-kvm' virsh_define: the last char of vmname can't be '-' or '_' vcpu_affinity: set cpuset range from 0 to 7 libvirt_hugepage: recalculate the number of static hugepage emulator_capabilities: add qemu_user root for qemu_conf virsh_nodeinfo: recalculate the number of cores_per_socket_os virsh_change_media_matrix:ide controllers are unsupported for aarch64 virsh_cpu_compare: update expect keyword output for aarch64 max_vcpus: add update_vcpu_topology function for max_vcpu hotplug_serial: fix subprocess.Popen() use error hotplug_serial: don't need delete virtio-serial controller sometime hotplug_serial: fix inconsistency filename between create and attach virsh_domxml_to_native: increase ASAN environmental judgment conditions virsh_domtime: hwclock will be stop both of suspend and managedsave for aarch64 virsh_domtime: add different cpu_mode for aarch64 hotplug_serial: add err msg for the return of two_devid Jie Tang (2): arm_vcpu_hotplug_opts: hot-unplug vcpu action is not supported on aarch64. guestpin: aarch64 do not support vcpu hot-unplug. Ke Zhiming (8): libvirt_usb_hotplug_device: redirect warning to /dev/null virsh_event: wait for few seconds after attach disk virsh_start: declaration before local variable reference virsh_dommemstat: declaration before local variable reference virsh_domstats: internal snapshots not supported on aarch64 virsh memtune: Set acceptable_minus for arm hotplug_serial: delete the existing file before shutil.copy pcibridge: delete s_0 variants Pan Nengyuan (18): virsh_attach_detach_disk: update test case virsh-attach-detach-disk virsh_maxvcpus: fix unboundLocalError in virsh_maxvcpus test case pcibridge: fix incorrect pci bus address usb_hotplug: ignore set selinux status in usb_hotplug test case libvirt_usb_hotplug_device: fix incorrect address attr guestnuma: update test case guestnuma virsh_migrate: update virsh_migrate testcase with numa nodedev: add smmu support on aarch64 virsh_nodedev: add aarch64 support virsh_migrate: dump traceback to improve the testcase's usability pcibridge: Do not convert pci_br_index to decimal at_dt_interface: use 'virtio' model in q35 for interface virsh_migrate: fix attaching interface failed during migration virsh_migrate: do not check 'strict' mode when enable_HP virsh_migrate: remove duplicate reset hugepages virsh_migrate: remove status_error when cache enable virsh_migrate: fix a 'model name' keyerror virsh_migrate: add cpu_model in migration for kunpeng platform Wang Shengfang (2): iface_network: add support for UEFI pxe boot and local boot files virsh_boot: add edk cdrom boot test case Wang Ziming (29): virsh_save_image: fix error for new xml is too large max_vcpus: fix max vcpus num to 'pc-q35' machine type virsh_attach_detach_disk: make sure the multipathd.service is stopped when create VG with a block devices. virtual_disks_multidisks:stop multipathd.service before modprobe scsi_debug hotplug_serial:adapt to the return messages of dup_hotplug hotplug_serial:the object r_o should be a str. libvirt_usb_hotplug_device: the maximum of usb device is 39. virtual_disks_multidisks: increase wait time between detach_disk operations. virsh_domxml_from_native: replace '\s' in re.sub() in virsh_convxml function with ''. virsh_attach_device: remove control characters such as '^@' from the result of session.cmd_output virtual_disks_multidisks: increase wait time in add_sleep function for not only ppc64 platform. virsh_blockcopy: change disk_target_bus and disk_format for lun_t type disk_device virtual_disks_multidisks: Check disk bus device option need to adapt to different platform. virtual_disks_multidisks: change iteration_times as it cause test time out. virtual_disks_multidisks: change virt_disk_addr_options unit to differentiate system disk. virsh_detach_device: Increase sleep to make sure detach_device operation succeed especially for device_alias. virsh_attach_device.py:Add short sleep time after attach_device operation. virtual_disks_multidisks: attach disk to VM with the same index controller,exepct error. sriov: change loop_times as it cause test time out. virsh_save_image_edit: change expected state to make it suitable for no_option. virsh_attach_detach_disk: wait for few seconds after detach disk. virsh_attach_detach_disk: wait for few seconds after attach disk virtual_disks_multidisk: add loader and nvram to xml adapt to aarch64 platform virtual_disks_multidisk: Retain pcie-root-port and pcie-to-pci-bridge when modifying VM XML virsh_attach_detach_disk: Replace the bus type of CDROM adapt to arrch64 platform. virtual_disks_multidisk: Disk bus device option need to adapt to aarch64 platform. virtual_disks_multidisks: Change bus and slot in virt_disk_addr_options parameter libvirt_mem: edit cpu_model and hugepages page_size to adapt to aarch64 and x86_64 platform. sriov: Add new ethernet driver hinic to adapt to arrch64 platform. Thanks. Chen Qun

1 0

[Virt-Test] Add some patches for openEuler virtualization base on avocado and avocado-vt
by Chenqun (kuhn) 30 Jun '20

30 Jun '20

Hi All, Avocado/Avocado-vt is a very good set of automated testing framework and virtualization plugins. Unfortunately, they do not support openEuler and aarch64. This serials is to adapt to openEuler and aarch64. There are a total of 29 patches here, one of which is Avocado and the other 28 are Avocado-vt. We plan to put the avocado/avocado-vt in the openEuler community and maintain it for a long time. Of course, we will also try to push it to upstream, so that upstream supports openEuler well. The upstream source repository： https://github.com/avocado-framework/avocado https://github.com/avocado-framework/avocado-vt Chen Qun (12): virsh: add '--nvram' in undefine for aarch64 base.cfg: add kbd for vm in the base.cfg qemu_vm: openEuler version not support tcp '-redir' utils_misc: change key word for verify_dmesg machines.cfg: set aarch64 default vGIC version=3 qemu_vm: change rombar from 0 to 1 for multiple network cards base.cfg: Add boot index for disk_image base.cfg: add virtio_ports for qemu-guest-agent testcases qemu_vm: add add_numa_object_mem function for aarch64 virt_vm: continue to login when connect to vm failed qemu_vm: don't need add_numa_object_mem after qemu 4.1.0 version qcontainer: change EFI pflash path for different OS in aarch64 Jie Tang (7): get_cpu_model: verify command for aarch64 to get supported cpu models. qemu_vm: when only confirm vm max vcpu, create vm by default. env_process: verify command for aarch64 to check device category. qcontainer: Add qdevice.QCPUBus in bus for machine_arm64_pci. qemu_vm: Set dies=1 while dies=0. base: add download url for iozone utils_test: verify copy dst path and build command for iozone. Ke Zhiming (1): virsh: fix VirshPersistent err Pan Nengyuan (4): virt_vm: use a serial connection when remote login failed utils_misc: fix migrate error on x86 when vlu enable in lscpu cpu.py: fix migrate error on x86 when vlu enable in lscpu nfs: fix nfs mounts repeatedly Wang Shengfang (3): avocado.utils.ditro: support openEuler virt_vm: add kernel panic verification msg in verify kernel crash utils_test: Add new_xml_with_object() to avoid triggering the GC and deleting the xml file Wang Ziming (2): openEuler: add openEuler 20.03 support libvirt: create netfs pool in pre_pool function with correct command Thanks. Chen Qun

1 0

【Meeting Notice】openEuler社区QAteam双周例会 Time: 2020-07-01 16:00-17:00
by Meeting Book 29 Jun '20

29 Jun '20

1 0

openEuler社区QA团队双周会议纪要（2020/6/3）
by liyongqiang (H) 04 Jun '20

04 Jun '20

openEuler社区QA 团队双周会议时间： 16:00-17:10 2020/6/3 参会者：kuhnchen18 lutianxiong speacher rigorous lemon-higgins Charlie_li 会议纪要人: Charlie_li 分类遗留问题及其他进展状态责任人社区QA团队治理与运营提需求到码云需支持子仓库管理能力 6/3: freesky-edward已提需求给码云，短时间暂解决不了，码云建议使用submodule或者subtree的方案来管理 Running freesky-edward/Charlie_li 申请新的代码仓库 6/3:需要的源码仓已完成建立；src-openeuler仓需确认打包分类后再申请建立（tar.gz+spec） Running Charlie_li 码云创建issue时提供block标签表明阻塞性类问题 6/3:基础设施已经增加相关标签 Close freesky-edward/Charlie_li 虚拟化测试能力开源 6/3:用例评审中计划6月17日开源 Running kuhnchen18 容器测试能力开源 6/3:当前用例整改和开源暂无人力投入 Running lutianxiong 集成类测试能力开源 6/3:计划6月17日开源执行框架和AT中当前用例；rpm包差异对比工具和AT中容器基本功能用例计划6月17日开源 Running Charlie_li/lemon-higgins 内核和编译器提供指导文档说明如何使用内核LTP及gcc相关开源测试套 6/3: lemon-higgins提供蓝云Windows机器给其它3个团队，用于社区文档编写和开源 Running speacher/rigorous/lemon-higgins 社区QA测试流程及指导文档编写 6/3:QA团队指导文档编写进展30% Running Charlie_li 版本测试 OS的AT由鲲鹏计算来保证，将集成类/容器/内核LTP等基础测试放入AT中，做到测试前移 6/3:集成类和LTP基础类用例已加入到AT中并成功运行；容器用例计划6月17日同步完成并开源 Running Charlie_li/lemon-higgins 编译器AT由编译器团队通过源码编译来保证，需要替换编译环境版本为已经发布的openEuler 20.03LTS版本 6/3:已经完成版本替换 close speacher 内核AT由内核测试团队部署openEuler的rootfs进行验证 6/3:环境准备已完成，任务执行调试中 Running rigorous 高优先级组件包质量加固 6/3:已完成2020暑期活动议题申报；加固测试已完成测试方案评审，测试用例编写中 Running Charlie_li/lutianxiong/lemon-higgins BR Charlie

1 0