【重要：LTS SP1版本计划调整通知】RE: openEuler 20.03 LTS SP1 RC3转测试通知
根据当前问题解决进展对LTS SP1版本计划调整如下： 原计划 RC4:2020-12-14~2020-12-19 Release:2020-12-22 新计划： RC4:2020-12-15~2020-12-17 RC5:2020-12-18~2020-12-22 发布预审:2020-12-21 Release:2020-12-22 【重要】两个截止合入时间点： 2020-12-14 15:00 2020-12-18 15:00 需要遗留和求助的问题，请在每日系统诊断会议上申请议题评审。 https://gitee.com/openeuler/release-management/blob/master/openEuler-20.03-L... Release plan Stange name Begin time End time Develop 2020-10-12 2020-11-7 Comptibility 2020-11-8 2020-11-18 Buil 2020-11-19 2020-11-21 Test round 1 2020-11-23 2020-11-28 Test round 2 2020-11-30 2020-12-5 Test round 3 2020-12-7 2020-12-12 Test round 4 2020-12-15 2020-12-17 Test round 5 2020-12-18 2020-12-22 release 2020-12-21 2020-12-22 From: Hufeng (Solar, Euler) Sent: Tuesday, December 8, 2020 9:42 AM To: release@openeuler.org; dev@openeuler.org; tc@openeuler.org; 'qa@openeuler.org' <qa@openeuler.org>; 'sa-announce@openeuler.org' <sa-announce@openeuler.org> Subject: openEuler 20.03 LTS SP1 RC3转测试通知 转测试计划比原计划有1天延期。 RC3版本取用路径如下（本周为最后可以合入周期，请在本周完成所有问题修改。RC4为回归版本，RC4测试中除致命问题外，原则不允许合入代码）： http://117.78.1.88:82/dailybuilds/openeuler/openEuler-20.03-LTS-SP1/openeule... RC3启动系统诊断会议（每日16:30~17:30），用于支撑重大问题解决，遗留问题决策等。本会议决策为主，请上会前准备求助和决策材料，并与相关领域maitainer做好沟通。 会议链接：https://zoom.us/j/96774516838?pwd=ajhlUjZFQ0VhSk5UVFdpbjBzZW1MQT09 欢迎感兴趣的开发者提前获取验证，对于发现的问题请及时以issue的方式反馈给openEuler社区（里程碑选择openEuler-20.03-LTS-SP1-round-2）。 由本次为发布前测试环节，软件版本可能存在重大问题，不建议大规模使用。 所有解决问题清单 序号 里程碑 任务ID 任务标题 2 openEuler-20.03-LTS-SP1-round-1 I27BAL 【20.03-LTS-SP1】x86 版本，在安装过程支持语言界面，有时候默认中文安装，有时候默认英文安装 3 openEuler-20.03-LTS-SP1-round-1 I279J4 【SP1】rust从SP1降级到LTS失败，存在冲突 4 openEuler-20.03-LTS-SP1-round-1 I279DP 【SP1】atune atune-db从SP1降级到LTS失败，存在冲突 6 openEuler-20.03-LTS-SP1-round-1 I278UK 【SP1】firefox从SP1降级到LTS失败，存在冲突 7 openEuler-20.03-LTS-SP1-round-1 I277EK 【fuzz】runtime error 8 openEuler-20.03-LTS-SP1-round-1 I2778G 【fuzz】use-of-uninitialized-value 10 openEuler-20.03-LTS-SP1-round-1 I276EF [20.03-LTS-SP1]postgresql-jdbc包安装失败 11 openEuler-20.03-LTS-SP1-round-1 I275DQ CVE-2019-19906 12 openEuler-20.03-LTS-SP1-round-1 I274N9 [20.03-LTS-SP1]安装成功后,首次启动卡住，启动失败 13 openEuler-20.03-LTS-SP1-round-1 I274AV slapd默认无法启动 14 openEuler-20.03-LTS-SP1-round-1 I2743Q haveged服务无法正常运行 15 openEuler-20.03-LTS-SP1-round-1 I273NI 缓冲区溢出 16 openEuler-20.03-LTS-SP1-round-1 I272S5 【SP1】升级nodejs到SP1版本失败，安装nodejs-docs失败 17 openEuler-20.03-LTS-SP1-round-1 I272LU 【SP1】rust cargo升级到从LTS升级到SP1版本，升级失败 18 openEuler-20.03-LTS-SP1-round-1 I272KJ 【20.03-SP1】执行命令rabbitmqctl hipe_compile /tmp/rabbit-hipe/ebin/出错 19 openEuler-20.03-LTS-SP1-round-1 I272J7 【20.03-SP1】rabbitmqctl创建队列时出错 20 openEuler-20.03-LTS-SP1-round-1 I2708N 【SP1】boost-regex从LTS升级到SP1，升级失败 21 openEuler-20.03-LTS-SP1-round-1 I26ZSZ 【LTS】安装卸载ceph的子包有异常信息 23 openEuler-20.03-LTS-SP1-round-1 I26ZL6 [openEuler 20.03-LTS-SP1] /usr/bin/wall的文件权限设置异常 24 openEuler-20.03-LTS-SP1-round-1 I26ZIS [20.03-LTS-SP1] x86/arm 启动lxcfs服务后，卸载并安装lxcfs和lxcfs-tools这两个包之后，安装时报错 25 openEuler-20.03-LTS-SP1-round-1 I26ZHQ 【20.03-SP1】安装最小化，安装成功后，点击reboot，系统会重启两次 26 openEuler-20.03-LTS-SP1-round-1 I26ZGD 【fuzz】内存泄漏 ERROR: LeakSanitizer: detected memory leaks 27 openEuler-20.03-LTS-SP1-round-1 I26ZE9 【SP1】卸载festival-help有异常信息 28 openEuler-20.03-LTS-SP1-round-1 I26Z87 【SP1】卸载clamd有失败信息 29 openEuler-20.03-LTS-SP1-round-1 I26XI4 【SP1】安装卸载obs-api有异常信息 30 openEuler-20.03-LTS-SP1-round-1 I26XFP ntpd服务启动失败 32 openEuler-20.03-LTS-SP1-round-1 I26X8U 【20.03-LTS-SP1】firewall-cmd --check-config 检查默认配置报错 33 openEuler-20.03-LTS-SP1-round-1 I26X8Q 【20.03-LTS-SP1】选择虚拟机化勾选所有插件安装后，lm_sensors.service启动失败 34 openEuler-20.03-LTS-SP1-round-1 I26X6E 【20.03-LTS-SP1】ipsec 服务启动失败 35 openEuler-20.03-LTS-SP1-round-1 I26X4E 【SP1】安装xhtml1-dtds有异常信息 36 openEuler-20.03-LTS-SP1-round-1 I26X12 【SP1】安装nagios-selinux有异常信息 37 openEuler-20.03-LTS-SP1-round-1 I26WUI 【SP1】【arm/x86】安装system-config-printer失败 38 openEuler-20.03-LTS-SP1-round-1 I26WOV 【SP1】【arm/x86】安装gutenprint有异常信息 39 openEuler-20.03-LTS-SP1-round-1 I26WFT 【20.03-SP1】x86 安装最小化+standard安装成功后，touch /.autorelabel后重启系统卡死 40 openEuler-20.03-LTS-SP1-round-1 I26W4R 【20.03-SP1】x86 安装最小化+standard安装成功后，进入系统输入reboot。出现crash 41 openEuler-20.03-LTS-SP1-round-1 I26VDM [20.03-LTS-SP1]repo源需要改成sp1的源 42 openEuler-20.03-LTS-SP1-round-1 I26VC4 20.03-LTS-SP1版本/etc/os-release和/etc/openEuler-release文件内容错误 43 openEuler-20.03-LTS-SP1-round-1 I26TUI 【20.03-LTS-SP1】【arm/x86】pcp-system-tools包下的pcp-iostat命令报语法错误 44 openEuler-20.03-LTS-SP1-round-1 I26TU9 【20.03-LTS-SP1】【arm/x86】pcp-system-tools包下的pcp-pidstat命令执行报错 47 openEuler-20.03-LTS-SP1-round-1 I26TDO 【20.03-SP1】安装引导过程中打印模块iscsi_tcp， sha256找不到，没有设备edd 48 openEuler-20.03-LTS-SP1-round-1 I26STP 【20.03-SP1】物理机kdump启动失败 49 openEuler-20.03-LTS-SP1-round-1 I26RLN [20.03-LTS-SP1]执行cpack -B定义打包目录时报错 50 openEuler-20.03-LTS-SP1-round-1 I26QWU 【20.03-SP1】安装最小化+所有插件，安装成功后，点击reboot，启动失败 51 openEuler-20.03-LTS-SP1-round-1 I1TIED read-heap-buffer-overflow in ZopfliWarmupHash() 62 openEuler-20.03-LTS-SP1-round-2 I2822Q [SP1]zenity部分文件权限变更 64 openEuler-20.03-LTS-SP1-round-2 I2813F 【dde】【界面显示】删除UOS相关图标 66 openEuler-20.03-LTS-SP1-round-2 I27X28 【20.03-LTS-SP1】nfs源先挂载第一个版本镜像，取消挂载后，再挂载第二个版本镜像，yum源里面是kernel48的版本，挂载后显示kernel47的版本 67 openEuler-20.03-LTS-SP1-round-2 I27X1T 【20.03-SP1】ModemManager服务启动失败 71 openEuler-20.03-LTS-SP1-round-2 I27UT7 【fuzz】runtime error 72 openEuler-20.03-LTS-SP1-round-2 I27UMK 【fuzz】use-of-uninitialized-value 75 openEuler-20.03-LTS-SP1-round-2 I27QZM 【SP1】升级containerd与LTS的docker-engine存在冲突 76 openEuler-20.03-LTS-SP1-round-2 I27QJX 【SP1】升级python2-scons python3-scons与LTS版本scons-help冲突 77 openEuler-20.03-LTS-SP1-round-2 I27NTJ 【fuzz】use-of-uninitialized-value 79 openEuler-20.03-LTS-SP1-round-2 I26APR 请将re2升级到2020-08-01版本 正在解决问题清单： 序号 里程碑 任务ID 任务标题 1 openEuler-20.03-LTS-SP1-round-1 I27RAH npiv无法删除 5 openEuler-20.03-LTS-SP1-round-1 I2799F 【SP1】curl从SP1降级到LTS失败，存在冲突 9 openEuler-20.03-LTS-SP1-round-1 I2775G 【fuzz】运行时错误 22 openEuler-20.03-LTS-SP1-round-1 I26ZLO 【20.03-SP1】安装成功后，点击reboot，系统会重启偶现卡死 31 openEuler-20.03-LTS-SP1-round-1 I26X9U 【20.03-SP1】安装时，NTP时间同步偶现未知错误 45 openEuler-20.03-LTS-SP1-round-1 I26TS3 【20.03-SP1】启动过程中打印db_root:cannot open /etc/target 46 openEuler-20.03-LTS-SP1-round-1 I26TR8 【20.03-SP1】安装的时候，先选择磁盘sdc进行分区，分区完成后，修改选择磁盘sdb进行分区，页面展示信息为sdc的分区信息 52 openEuler-20.03-LTS-SP1-round-2 I28FO8 分区满情况下zip压缩会有临时文件残留 53 openEuler-20.03-LTS-SP1-round-2 I2872V 【20.03-SP1】【arm/x86】cloud-init安装后重启，/etc/ssh下部分文件权限做了修改 54 openEuler-20.03-LTS-SP1-round-2 I2870F 【20.03-LTS-SP1】arm/x86物理机，在安装引导界面，以及安装成功后报错mod cmd fail:Feature not supported 55 openEuler-20.03-LTS-SP1-round-2 I286YJ 【20.03-LTS-SP1】net-snmp升级后，文件权限变更 56 openEuler-20.03-LTS-SP1-round-2 I286P9 【20.03-SP1】物理机x86 安装everything镜像，kdump启动失败 57 openEuler-20.03-LTS-SP1-round-2 I28666 【20.03-LTS-SP1】postgresql包中文件权限有变更 58 openEuler-20.03-LTS-SP1-round-2 I285RM 【20.03-LTS-SP1】ppp包中文件权限有变更 59 openEuler-20.03-LTS-SP1-round-2 I283CE 【20.03-LTS-SP1】ebtables升级到2.0.11后，配置文件/etc/sysconfig/ebtables-config权限变更为755 60 openEuler-20.03-LTS-SP1-round-2 I283BK 【20.03-LTS-SP1】创建vpn连接失败 61 openEuler-20.03-LTS-SP1-round-2 I283BC 【20.03-LTS-SP1】grpc包中部分文件没有指定权限,使用的是默认权限 63 openEuler-20.03-LTS-SP1-round-2 I281FY 【fuzz】use-of-uninitialized-value 65 openEuler-20.03-LTS-SP1-round-2 I2811J 【fuzz】heap-buffer-overflow 68 openEuler-20.03-LTS-SP1-round-2 I27WZN 【fuzz】内存泄漏 69 openEuler-20.03-LTS-SP1-round-2 I27WZ5 【fuzz】heap-buffer-overflow 70 openEuler-20.03-LTS-SP1-round-2 I27WX9 【20.03-LTS-SP1】偶现x86 版本，安装系统到已经装过系统的组raid的盘上,报错创建逻辑卷失败 73 openEuler-20.03-LTS-SP1-round-2 I27RB5 【SP1】【x86物理机】LTS版本全量升级到SP1，重启失败 74 openEuler-20.03-LTS-SP1-round-2 I27R99 【SP1】【arm物理机】升级kernel有报错信息，重启黑屏 78 openEuler-20.03-LTS-SP1-round-2 I278MX CVE-2019-12214 Release计划路径 https://gitee.com/openeuler/release-management/blob/master/openEuler-20.03-L... Release plan Stange name Begin time End time Develop 2020-10-12 2020-11-7 Comptibility 2020-11-8 2020-11-18 Buil 2020-11-19 2020-11-21 Test round 1 2020-11-23 2020-11-28 Test round 2 2020-11-30 2020-12-5 Test round 3 2020-12-7 2020-12-12 Test round 4 2020-12-14 2020-12-19 release 2020-12-21 2020-12-22 Feture list 状态说明：discussion(方案讨论，需求未接受)，developing(开发中)，Testing(测试中)，Accepted(已验收) no fetur status sig owner 1 openEuler 20.03 LTS SP1支持高可用pacemaker<https://gitee.com/openeuler/release-management/issues/I23GH2?from=project-issue> developing sig-HA yangzhao_kl 2 openEuler 20.03 LTS SP1支持openGauss版本<https://gitee.com/openeuler/release-management/issues/I23GGW?from=project-issue> discussion 3 openEuler 20.03 LTS SP1支持1822 HBA卡驱动<https://gitee.com/openeuler/release-management/issues/I23GGR?from=project-issue> discussion 4 openEuler 20.03 LTS SP1支持华为多路径<https://gitee.com/openeuler/release-management/issues/I23GGO?from=project-issue> developing 5 openEuler 20.03 LTS SP1支持openStack<https://gitee.com/openeuler/release-management/issues/I23GGJ?from=project-issue> discussion sig-python-modules @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 6 openEuler 20.03 LTS SP1支持金融领域软件包<https://gitee.com/openeuler/release-management/issues/I23GG1?from=project-issue> developing DB @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 7 openEuler 20.03 LTS SP1支持大数据管理组件Ambari的依赖组件<https://gitee.com/openeuler/release-management/issues/I23GFY?from=project-issue> developing sig-release-management @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 8 openEuler 20.03 LTS SP1新增DDE组件<https://gitee.com/openeuler/release-management/issues/I23GFR?from=project-issue> developing sig-DDE @panchenbo<https://gitee.com/panchenbo> 9 openEuler 20.03-LTS版本新增criu组件<https://gitee.com/openeuler/release-management/issues/I23GFP?from=project-issue> developing 10 openEuler 20.03 LTS SP1支持libxml，hyperscan<https://gitee.com/openeuler/release-management/issues/I23GFL?from=project-issue> developing Desktop @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 11 openEuler 20.03 LTS SP1同时支持openjdk多个版本<https://gitee.com/openeuler/release-management/issues/I23GFC?from=project-issue> developing 12 openEuler 20.03 SP1 虚拟化支持内存，cpu热添加<https://gitee.com/openeuler/release-management/issues/I23GF7?from=project-issue> developing Virt @alexchen<https://gitee.com/zhendongchen> 13 openEuler 20.03 SP1 “支持vmtop”<https://gitee.com/openeuler/release-management/issues/I23GF2?from=project-issue> developing Virt @alexchen<https://gitee.com/zhendongchen> 14 openEuler 20.03 LTS SP1虚拟化支持安全启动<https://gitee.com/openeuler/release-management/issues/I23GEY?from=project-issue> developing Virt @alexchen<https://gitee.com/zhendongchen> 15 openEuler 20.03 LTS SP1虚拟化支持custom模式<https://gitee.com/openeuler/release-management/issues/I23GEU?from=project-issue> developing Virt @alexchen<https://gitee.com/zhendongchen> 16 openEuler 20.03 LTS SP1回合20.09 Atune<https://gitee.com/openeuler/release-management/issues/I23GEM?from=project-issue> developing 17 openEuler 20.03 LTS SP1补充SONY使用的依赖包<https://gitee.com/openeuler/release-management/issues/I23GEG?from=project-issue> developing 18 openEuler 20.03 LTS SP1补齐pts安装依赖<https://gitee.com/openeuler/release-management/issues/I23GEC?from=project-issue> developing 19 openEuler 20.03 LTS SP1回合20.09 iSular新版本特性<https://gitee.com/openeuler/release-management/issues/I23GE8?from=project-issue> developing 20 openEuler 20.03 LTS SP1开源openEuler-rpm-config宏<https://gitee.com/openeuler/release-management/issues/I23GDZ?from=project-issue> developing Base-service @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 21 openEuler 20.03 LTS SP1支持abrt组件<https://gitee.com/openeuler/release-management/issues/I23GDU?from=project-issue> developing Application @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 22 openEuler 20.03 LTS SP1支持osinfo<https://gitee.com/openeuler/release-management/issues/I23GDP?from=project-issue> developing Base-service @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 23 microcode_ctl需要回合支持x86<https://gitee.com/openeuler/release-management/issues/I1RFVK?from=project-issue> developing 24 openEuler 20.03 LTS SP1新增 raspberrypi 版本<https://gitee.com/openeuler/release-management/issues/I1RMC1?from=project-issue> testing RaspberryPi @woqidaideshi<https://gitee.com/woqidaideshi> 25 openEuler 20.03 LTS SP1新增UKUI组件<https://gitee.com/openeuler/release-management/issues/I1R54N?from=project-issue> developing sig_UKUI @dou33<https://gitee.com/dou33> 26 openEuler 20.03 LTS SP1新增netinstall组件<https://gitee.com/openeuler/release-management/issues/I1Y26A?from=project-issue> developing sig-OS-Builder @t_feng<https://gitee.com/t_feng> 27 openEuler20.03 LTS SP1版本支持飞腾 arm64架构CPU<https://gitee.com/openeuler/release-management/issues/I1RXGT?from=project-issue> developing 28 openEuler 20.03-LTS版本升级新增bcc的软件包<https://gitee.com/openeuler/release-management/issues/I1O7RM?from=project-issue> developing 29 openEuler 20.03 LTS SP1申请新增maildrop和proftpd软件包<https://gitee.com/openeuler/release-management/issues/I1TWXG?from=project-issue> developing 30 openEuler 20.03 LTS SP1内核开启config_acpi_nfit内核选项<https://gitee.com/openeuler/release-management/issues/I26KWQ?from=project-issue> developing From: Hufeng (Solar, Euler) Sent: Tuesday, December 1, 2020 9:16 AM To: 'release@openeuler.org' <release@openeuler.org<mailto:release@openeuler.org>>; 'dev@openeuler.org' <dev@openeuler.org<mailto:dev@openeuler.org>>; 'tc' <tc@openeuler.org<mailto:tc@openeuler.org>>; 'qa@openeuler.org' <qa@openeuler.org<mailto:qa@openeuler.org>>; 'Infra@openeuler.org' <Infra@openeuler.org<mailto:Infra@openeuler.org>> Subject: openEuler 20.03 LTS SP1 RC2转测试通知 转测试计划比原计划有1天延期。 请相关责任人最晚于2020-12-5前完成特性进展更新为正常状态。 RC2版本取用路径如下： http://117.78.1.88:82/dailybuilds/openeuler/openEuler-20.03-LTS-SP1/openeule... 欢迎感兴趣的开发者提前获取验证，对于发现的问题请及时以issue的方式反馈给openEuler社区（里程碑选择openEuler-20.03-LTS-SP1-round-2）。 由本次为发布前测试环节，软件版本可能存在重大问题，不建议大规模使用。 RC1已解决问题清单 任务ID 任务标题 I279DP 【SP1】atune atune-db从SP1降级到LTS失败，存在冲突 I278UK 【SP1】firefox从SP1降级到LTS失败，存在冲突 I277EK 【fuzz】runtime error I2778G 【fuzz】use-of-uninitialized-value I276EF [20.03-LTS-SP1]postgresql-jdbc包安装失败 I275DQ CVE-2019-19906 I274N9 [20.03-LTS-SP1]安装成功后,首次启动卡住，启动失败 I2743Q haveged服务无法正常运行 I26ZHQ 【20.03-SP1】安装最小化，安装成功后，点击reboot，系统会重启两次 I26ZGD 内存泄漏 ERROR: LeakSanitizer: detected memory leaks I26ZE9 【SP1】卸载festival-help有异常信息 I26Z87 【SP1】卸载clamd有失败信息 I26XI4 【SP1】安装卸载obs-api有异常信息 I26XFP ntpd服务启动失败 I26X8U 【20.03-LTS-SP1】firewall-cmd --check-config 检查默认配置报错 I26X6E 【20.03-LTS-SP1】ipsec 服务启动失败 I26X4E 【SP1】安装xhtml1-dtds有异常信息 I26X12 【SP1】安装nagios-selinux有异常信息 I26WUI 【SP1】【arm/x86】安装system-config-printer失败 I26WOV 【SP1】【arm/x86】安装gutenprint有异常信息 I26WFT 【20.03-SP1】x86 安装最小化+standard安装成功后，touch /.autorelabel后重启系统卡死 I26W4R 【20.03-SP1】x86 安装最小化+standard安装成功后，进入系统输入reboot。出现crash I26VDM [20.03-LTS-SP1]repo源需要改成sp1的源 I26VC4 20.03-LTS-SP1版本/etc/os-release和/etc/openEuler-release文件内容错误 I26TUI 【20.03-LTS-SP1】【arm/x86】pcp-system-tools包下的pcp-iostat命令报语法错误 I26TU9 【20.03-LTS-SP1】【arm/x86】pcp-system-tools包下的pcp-pidstat命令执行报错 I26TDO 【20.03-SP1】安装引导过程中打印模块iscsi_tcp， sha256找不到，没有设备edd I26STP 【20.03-SP1】物理机kdump启动失败 I26RLN [20.03-LTS-SP1]执行cpack -B定义打包目录时报错 I26QWU 【20.03-SP1】安装最小化+所有插件，安装成功后，点击reboot，启动失败 I1TIED read-heap-buffer-overflow in ZopfliWarmupHash() RC1未解决问题清单 任务ID 任务标题 I27BAL 【20.03-LTS-SP1】x86 版本，在安装过程支持语言界面，有时候默认中文安装，有时候默认英文安装 I279J4 【SP1】rust从SP1降级到LTS失败，存在冲突 I2799F 【SP1】curl从SP1降级到LTS失败，存在冲突 I2775G 【fuzz】运行时错误 I273NI 缓冲区溢出 I272S5 【SP1】升级nodejs到SP1版本失败，安装nodejs-docs失败 I272LU 【SP1】rust cargo升级到从LTS升级到SP1版本，升级失败 I272KJ 【20.03-SP1】执行命令rabbitmqctl hipe_compile /tmp/rabbit-hipe/ebin/出错 I272J7 【20.03-SP1】rabbitmqctl创建队列时出错 I2708N 【SP1】boost-regex从LTS升级到SP1，升级失败 I26ZSZ 【LTS】安装卸载ceph的子包有异常信息 I26ZLO 【20.03-SP1】安装成功后，点击reboot，系统会重启偶现卡死 I26ZIS [20.03-LTS-SP1] x86/arm 启动lxcfs服务后，卸载并安装lxcfs和lxcfs-tools这两个包之后，安装时报错 I26X9U 【20.03-SP1】安装时，NTP时间同步偶现未知错误 I26X8Q 【20.03-LTS-SP1】选择虚拟机化勾选所有插件安装后，lm_sensors.service启动失败 I26TS3 【20.03-SP1】启动过程中打印db_root:cannot open /etc/target I26TR8 【20.03-SP1】安装的时候，先选择磁盘sdc进行分区，分区完成后，修改选择磁盘sdb进行分区，页面展示信息为sdc的分区信息 Release计划路径 https://gitee.com/openeuler/release-management/blob/master/openEuler-20.03-L... Release plan Stange name Begin time End time Develop 2020-10-12 2020-11-7 Comptibility 2020-11-8 2020-11-18 Buil 2020-11-19 2020-11-21 Test round 1 2020-11-23 2020-11-28 Test round 2（we are here） 2020-11-30 2020-12-5 Test round 3 2020-12-7 2020-12-12 Test round 4 2020-12-14 2020-12-19 release 2020-12-21 2020-12-22 Feture list no fetur status sig owner 1 openEuler 20.03 LTS SP1支持高可用pacemaker<https://gitee.com/openeuler/release-management/issues/I23GH2?from=project-issue> developing sig-HA yangzhao_kl 2 openEuler 20.03 LTS SP1支持openGauss版本<https://gitee.com/openeuler/release-management/issues/I23GGW?from=project-issue> developing 3 openEuler 20.03 LTS SP1支持1822 HBA卡驱动<https://gitee.com/openeuler/release-management/issues/I23GGR?from=project-issue> developing 4 openEuler 20.03 LTS SP1支持华为多路径<https://gitee.com/openeuler/release-management/issues/I23GGO?from=project-issue> developing 5 openEuler 20.03 LTS SP1支持openStack<https://gitee.com/openeuler/release-management/issues/I23GGJ?from=project-issue> developing sig-python-modules @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 6 openEuler 20.03 LTS SP1支持金融领域软件包<https://gitee.com/openeuler/release-management/issues/I23GG1?from=project-issue> developing DB @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 7 openEuler 20.03 LTS SP1支持大数据管理组件Ambari的依赖组件<https://gitee.com/openeuler/release-management/issues/I23GFY?from=project-issue> developing sig-release-management @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 8 openEuler 20.03 LTS SP1新增DDE组件<https://gitee.com/openeuler/release-management/issues/I23GFR?from=project-issue> developing sig-DDE @panchenbo<https://gitee.com/panchenbo> 9 openEuler 20.03-LTS版本新增criu组件<https://gitee.com/openeuler/release-management/issues/I23GFP?from=project-issue> developing 10 openEuler 20.03 LTS SP1支持libxml，hyperscan<https://gitee.com/openeuler/release-management/issues/I23GFL?from=project-issue> developing Desktop @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 11 openEuler 20.03 LTS SP1同时支持openjdk多个版本<https://gitee.com/openeuler/release-management/issues/I23GFC?from=project-issue> developing 12 openEuler 20.03 SP1 虚拟化支持内存，cpu热添加<https://gitee.com/openeuler/release-management/issues/I23GF7?from=project-issue> developing Virt @alexchen<https://gitee.com/zhendongchen> 13 openEuler 20.03 SP1 “支持vmtop”<https://gitee.com/openeuler/release-management/issues/I23GF2?from=project-issue> developing Virt @alexchen<https://gitee.com/zhendongchen> 14 openEuler 20.03 LTS SP1虚拟化支持安全启动<https://gitee.com/openeuler/release-management/issues/I23GEY?from=project-issue> developing Virt @alexchen<https://gitee.com/zhendongchen> 15 openEuler 20.03 LTS SP1虚拟化支持custom模式<https://gitee.com/openeuler/release-management/issues/I23GEU?from=project-issue> developing Virt @alexchen<https://gitee.com/zhendongchen> 16 openEuler 20.03 LTS SP1回合20.09 Atune<https://gitee.com/openeuler/release-management/issues/I23GEM?from=project-issue> developing 17 openEuler 20.03 LTS SP1补充SONY使用的依赖包<https://gitee.com/openeuler/release-management/issues/I23GEG?from=project-issue> developing 18 openEuler 20.03 LTS SP1补齐pts安装依赖<https://gitee.com/openeuler/release-management/issues/I23GEC?from=project-issue> developing 19 openEuler 20.03 LTS SP1回合20.09 iSular新版本特性<https://gitee.com/openeuler/release-management/issues/I23GE8?from=project-issue> developing 20 openEuler 20.03 LTS SP1开源openEuler-rpm-config宏<https://gitee.com/openeuler/release-management/issues/I23GDZ?from=project-issue> developing Base-service @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 21 openEuler 20.03 LTS SP1支持abrt组件<https://gitee.com/openeuler/release-management/issues/I23GDU?from=project-issue> developing Application @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 22 openEuler 20.03 LTS SP1支持osinfo<https://gitee.com/openeuler/release-management/issues/I23GDP?from=project-issue> developing Base-service @small_leek<https://gitee.com/small_leek> @hht8<https://gitee.com/hht8> 23 microcode_ctl需要回合支持x86<https://gitee.com/openeuler/release-management/issues/I1RFVK?from=project-issue> developing 24 openEuler 20.03 LTS SP1新增 raspberrypi 版本<https://gitee.com/openeuler/release-management/issues/I1RMC1?from=project-issue> developing RaspberryPi @woqidaideshi<https://gitee.com/woqidaideshi> 25 openEuler 20.03 LTS SP1新增UKUI组件<https://gitee.com/openeuler/release-management/issues/I1R54N?from=project-issue> developing sig_UKUI @dou33<https://gitee.com/dou33> 26 openEuler 20.03 LTS SP1新增netinstall组件<https://gitee.com/openeuler/release-management/issues/I1Y26A?from=project-issue> developing sig-OS-Builder @t_feng<https://gitee.com/t_feng> 27 openEuler20.03 LTS SP1版本支持飞腾 arm64架构CPU<https://gitee.com/openeuler/release-management/issues/I1RXGT?from=project-issue> developing 28 openEuler 20.03-LTS版本升级新增bcc的软件包<https://gitee.com/openeuler/release-management/issues/I1O7RM?from=project-issue> developing 29 openEuler 20.03 LTS SP1申请新增maildrop和proftpd软件包<https://gitee.com/openeuler/release-management/issues/I1TWXG?from=project-issue> developing 30 openEuler 20.03 LTS SP1内核开启config_acpi_nfit内核选项<https://gitee.com/openeuler/release-management/issues/I26KWQ?from=project-issue> developing 历史转测试版本取用链接 RC1版本取用路径如下： http://117.78.1.88:82/dailybuilds/openeuler/openEuler-20.03-LTS-SP1/openeule...
participants (1)
-
Hufeng (Solar, Euler)