Dear all，
openEuler
23.09 RC4版本已顺利构建并通过AT测试，openEuler
23.09创新版本继续基于EulerMaker统一编译构建，同时继续保留OBS构建系统及对应的构建工程，社区开发者可继续按需使用。
l
openEuler
23.09 RC4版本下载地址：http://121.36.84.172/dailybuild/EBS-openEuler-23.09/rc4_openeuler-2023-09-13-21-46-47/
l
基于6.4 kernel发布，面向openEuler 24.03 LTS提前进行技术探索
l
openEuler 23.09基础软件包升级完成，软件包公示地址：https://gitee.com/openeuler/release-management/blob/master/openEuler-23.09/openEuler-23.09%20%E5%8D%87%E7%BA%A7%E9%80%89%E5%9E%8B.md
l
openEuler 23.09
feature list：https://gitee.com/openeuler/release-management/blob/master/openEuler-23.09/release-plan.md
各个SIG组可基于该版本开展组件自验证及试用，社区一起协作支撑openEuler 23.09版本issue发现和定位修复，您发现和定位修复每一个issue不仅可以解决您使用openEuler版本的问题点，更可以帮助社区一起持续优化用户的体验！
l
社区QA
测试平台 radiates: https://radiatest.openeuler.org
Release-plan
openEuler 23.09创新版本待办issue，请责任sig于9月18日前闭环，社区计划在9月19日进行RC5转测
|
里程碑 |
任务标题 |
任务负责人 |
标签 |
任务路径 |
仓库路径 |
|
openEuler-23.09-round-2 |
dnf check检查出kde-filesystem被舍弃问题未解决 |
sig/System-tool |
https://gitee.com/open_euler/dashboard?issue_id=I6IRIH |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/kde-filesystem |
|
|
openEuler-23.09-dailybuild |
[EulerMaker&OBS] tensorflow build problem in openEuler:23.09 |
缪金成 |
block,sig/ai |
https://gitee.com/open_euler/dashboard?issue_id=I7QJUD |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/tensorflow |
|
openEuler-23.09-dailybuild |
[EulerMaker&OBS] gtk-doc build problem in openEuler:23.09 |
dwl301 |
sig/GNOME,block |
https://gitee.com/open_euler/dashboard?issue_id=I7S7OA |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/gtk-doc |
|
openEuler-23.09-alpha |
【openEuler23.09】mlock负数 -65535
返回0，不符合预期 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I7TW89 |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
|
|
openEuler-23.09-alpha |
[EulerMaker&OBS] rygel build problem in openEuler:23.09:Epol |
dwl301 |
sig/GNOME |
https://gitee.com/open_euler/dashboard?issue_id=I7TY9B |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/rygel |
|
openEuler-23.09-alpha |
[EulerMaker&OBS] cufflinks build problem in openEuler:23.09:Epol |
杨昭 |
sig/sig-bio |
https://gitee.com/open_euler/dashboard?issue_id=I7TY9D |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/cufflinks |
|
openEuler-23.09-alpha |
[EulerMaker&OBS] octave build problem in openEuler:23.09:Epol |
sinever |
sig/ai |
https://gitee.com/open_euler/dashboard?issue_id=I7TY9I |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/octave |
|
openEuler-23.09-alpha |
[EulerMaker&OBS] qla2xxx build problem in openEuler:23.09:Epol |
XiaosuLi |
sig/sig-Compatibilit |
https://gitee.com/open_euler/dashboard?issue_id=I7TY9X |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/qla2xxx |
|
openEuler-23.09-alpha |
[EulerMaker&OBS] caja-extensions build problem in openEuler:23.09:Epol |
刘家杰 |
sig/sig-mate-desktop |
https://gitee.com/open_euler/dashboard?issue_id=I7TZB3 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/caja-extensions |
|
openEuler-23.09-alpha |
[EulerMaker&OBS] cinnamon build problem in openEuler:23.09:Epol |
dwl301 |
sig/sig-cinnamon |
https://gitee.com/open_euler/dashboard?issue_id=I7TZCP |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/cinnamon |
|
openEuler-23.09-alpha |
[OBS] cjs build problem in openEuler:23.09:Epol |
dwl301 |
sig/sig-cinnamon |
https://gitee.com/open_euler/dashboard?issue_id=I7TZCR |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/cjs |
|
openEuler-23.09-alpha |
[EulerMaker&OBS] gnome-music build problem in openEuler:23.09:Epol |
dwl301 |
sig/GNOME |
https://gitee.com/open_euler/dashboard?issue_id=I7TZDI |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/gnome-music |
|
openEuler-23.09-alpha |
[EulerMaker&OBS] system-config-users build problem in openEuler:23.09:Epol |
刘家杰 |
sig/sig-mate-desktop |
https://gitee.com/open_euler/dashboard?issue_id=I7TZHM |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/system-config-users |
|
openEuler-23.09-alpha |
[OBS] calls build problem in openEuler:23.09:Epol |
dwl301 |
sig/GNOME |
https://gitee.com/open_euler/dashboard?issue_id=I7V1OT |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/calls |
|
openEuler-23.09-round-2 |
[EulerMaker&OBS] feedbackd build problem in openEuler:23.09:Epol |
dwl301 |
sig/GNOME,block |
https://gitee.com/open_euler/dashboard?issue_id=I7V9YZ |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/feedbackd |
|
openEuler-23.09-round-1 |
【openEuler-23.09 rc1
】【arm/x86 】powertop.service服务启动报：modprobe cpufreq_stats failed |
Monday |
sig/Base-service |
https://gitee.com/open_euler/dashboard?issue_id=I7W5HD |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/powertop |
|
openEuler-23.09-round-1 |
【openEuler-23.09 rc1
】【arm/x86 】strongswan.service、strongswan-starter.service启动之后，日志中有异常信息 |
OpenHosec |
sig/sig-security-fac |
https://gitee.com/open_euler/dashboard?issue_id=I7WDVS |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/strongswan |
|
openEuler-23.09-round-1 |
【23.09 round1】【arm/x86】mandoc安装过程中有failed |
杨昭 |
sig/sig-epol,block |
https://gitee.com/open_euler/dashboard?issue_id=I7WE9H |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/mandoc |
|
openEuler-23.09-round-1 |
【23.09 round1】【arm/x86】 a2x -f xhtml --xsl-file=common/xsl/test.xsl -D
./tmp/ common/test.adoc |
陈棋德 |
sig/Base-service |
https://gitee.com/open_euler/dashboard?issue_id=I7WG04 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/asciidoc |
|
openEuler-23.09-round-1 |
【openEuler-23.09-RC1】【arm/x86】ltp执行用例cgroup报错 |
卢佳琳 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I7WHJL |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
|
openEuler-23.09-round-1 |
无法识别的命令"-fstack-clash-protection-O2" |
sig/Base-service |
https://gitee.com/open_euler/dashboard?issue_id=I7WIK9 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/openEuler-rpm-config |
|
|
openEuler-23.09-round-1 |
【23.09 round1】【arm/x86】yakuake安装失败，缺少安装依赖 |
窦?? |
sig/sig-KDE |
https://gitee.com/open_euler/dashboard?issue_id=I7WLYJ |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/yakuake |
|
openEuler-23.09-round-1 |
[EulerMaker] kiran-desktop install problem in openEuler:23.09:Epol |
柳鑫浩 |
sig/sig-KIRAN-DESKTO |
https://gitee.com/open_euler/dashboard?issue_id=I7WQKP |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/kiran-desktop |
|
openEuler-23.09-round-1 |
[EulerMaker] ncbi-blast install problem in openEuler:23.09:Epol |
杨昭 |
sig/sig-bio |
https://gitee.com/open_euler/dashboard?issue_id=I7WQPA |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/ncbi-blast |
|
openEuler-23.09-round-1 |
【openEuler-23.09 rc1
】【arm/x86 】sysboost.service启动有报错信息 |
刘铁 |
sig/A-Tune |
https://gitee.com/open_euler/dashboard?issue_id=I7WYOM |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/sysboost |
|
openEuler-23.09-round-1 |
[EulerMaker] python-keras-rl2 install problem in openEuler:23.09 |
赵天阳 |
sig/A-Tune |
https://gitee.com/open_euler/dashboard?issue_id=I7XD67 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/python-keras-rl2 |
|
openEuler-23.09-round-1 |
[EulerMaker] plasma-workspace install problem in openEuler:23.09:Epol |
misaka00251 |
sig/sig-KDE |
https://gitee.com/open_euler/dashboard?issue_id=I7XDFG |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/plasma-workspace |
|
openEuler-23.09-round-2 |
[EulerMaker] system-config-users-docs install problem in openEuler:23.09:Epol |
刘家杰 |
sig/sig-mate-desktop |
https://gitee.com/open_euler/dashboard?issue_id=I7XLCS |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/system-config-users-docs |
|
openEuler-23.09-round-2 |
[23.09-RC2][arm/x86]在旧热补丁包未卸载的条件下， 应用新的热补丁包失败 |
RenoSeven |
sig/sig-ops |
https://gitee.com/open_euler/dashboard?issue_id=I7Y7SY |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/syscare |
|
openEuler-23.09-round-2 |
限制negative dentry数量的功能丢失 |
李炜 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I7Y986 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/kernel |
|
openEuler-23.09-round-2 |
【23.09-RC2】【x86/arm】k8s部署时，启动kubelet服务报错"Error
getting node" err="node \"cloud.kubeedge\" not found"，导致k8s部署失败 |
sig/sig-CloudNative |
https://gitee.com/open_euler/dashboard?issue_id=I7YGG1 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/kubernetes |
|
|
openEuler-23.09-round-2 |
sysboost优化后，unixbench性能不及预期，频繁打印replace
rto file fail |
Liu Yuntao |
sig/A-Tune |
https://gitee.com/open_euler/dashboard?issue_id=I7YP90 |
https://gitee.com/open_euler/dashboard/projects/openeuler/sysboost |
|
openEuler-23.09-round-2 |
【openEuler 23.09 rc3】系统桌面启动器显示异常 |
杨显钊 |
sig/sig-DDE |
https://gitee.com/open_euler/dashboard?issue_id=I7Z0YK |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/dde |
|
openEuler-23.09-round-2 |
【openEuler 23.09 rc3】系统内提示信息显示异常 |
杨显钊 |
sig/sig-DDE |
https://gitee.com/open_euler/dashboard?issue_id=I7Z1PU |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/dde |
|
openEuler-23.09-round-3 |
【openEuler 23.09 rc3】日志收集工具显示异常 |
杨显钊 |
sig/sig-DDE |
https://gitee.com/open_euler/dashboard?issue_id=I7ZG9K |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/dde |
|
openEuler-23.09-round-2 |
【openEuler-23.09-rc2】kpatch-build命令制作内核热补丁失败，阻塞syscare转测自验 |
sig/Base-service |
https://gitee.com/open_euler/dashboard?issue_id=I7ZH8O |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/kpatch |
|
|
openEuler-23.09-round-3 |
[EulerMaker] gajim install problem in openEuler:23.09:Epol |
刘家杰 |
sig/sig-mate-desktop |
https://gitee.com/open_euler/dashboard?issue_id=I7ZHPK |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/gajim |
|
openEuler-23.09-round-3 |
[EulerMaker] gnome-photos install problem in openEuler:23.09:Epol |
dwl301 |
sig/GNOME |
https://gitee.com/open_euler/dashboard?issue_id=I7ZHQ0 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/gnome-photos |
|
openEuler-23.09-round-2 |
gmem执行矩阵乘，矩阵大小为1搭配异步prefetch会概率性卡住 |
房闯闯 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I7ZIT4 |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
|
openEuler-23.09-round-3 |
[23.09 RC3]opengauss安装后不能直接使能且部分二进制无法执行 |
sig/DB |
https://gitee.com/open_euler/dashboard?issue_id=I7ZXY4 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/opengauss-server |
|
|
openEuler-23.09-round-3 |
【23.09 RC3】使用rpmbuild
方式编译完成后，进入opengauss-server源码目录下make check报错 |
sig/DB |
https://gitee.com/open_euler/dashboard?issue_id=I7ZY6R |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/opengauss-server |
|
|
openEuler-23.09-round-3 |
【2309】softdog加载后打开设备，旧版本可以直接卸载，新版本不可卸载 |
李炜 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I80EAC |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
|
openEuler-23.09-round-2 |
xfs生命周期（mkfs.xfs、xfs_info、xfs_repair
、xfs_growfs ）执行过程不断触发dropcache，系统crash |
李炜 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I80EEY |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
|
openEuler-23.09-round-3 |
openEuler-23.09
内核soft lockup，tc命令卡死 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I80FL9 |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
|
|
openEuler-23.09-round-3 |
ipv6 DNAT组网不通 |
sig/Networking |
https://gitee.com/open_euler/dashboard?issue_id=I80GMD |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/iputils |
|
|
openEuler-23.09-round-3 |
python执行正则表达式的时候，由于匹配范围较大，导致占用内存超10M |
sig/Base-service |
https://gitee.com/open_euler/dashboard?issue_id=I80GO2 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/python3 |
|
|
openEuler-23.09-round-2 |
gmemFreeEager和gmemPrefetch部分异常参数不报错 |
房闯闯 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I80KA7 |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
|
openEuler-23.09-round-2 |
调用gmemFreeEager((unsigned long)0xFFFFFFFFFFFFFFFF, -1, NULL)，系统panic |
房闯闯 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I80KLC |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
|
openEuler-23.09-round-3 |
普通用户ssh登录创建tmp文件后，始终可以查询到/run/user/[普通用户id]的挂载信息 |
洪靖皓 |
sig/Base-service |
https://gitee.com/open_euler/dashboard?issue_id=I80MIK |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/systemd |
|
openEuler-23.09-round-3 |
[23.09-RC3][arm/x86][Aops] kernel冷补丁收编后，并accept热补丁，重启系统后，syscare报错 |
王光格 |
sig/sig-ops |
https://gitee.com/open_euler/dashboard?issue_id=I80TM0 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/aops-apollo |
|
openEuler-23.09-round-2 |
内存超分后，调用gmemFreeEager释放内存，device上内存减少量不符合预期 |
房闯闯 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I80TWT |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
|
openEuler-23.09-round-3 |
[23.09-RC3][arm/x86][Aops]配置来源选择“从主机导入”，新增业务域配置失败 |
王记棒棒猪 |
sig/sig-ops |
https://gitee.com/open_euler/dashboard?issue_id=I81290 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/A-Ops |
|
openEuler-23.09-round-4 |
【openEuler-23.09-RC4】【x86】进入安装页面前镜像自动断开或卡住，导致没法安装成功 |
孙海 |
sig/sig-OS-Builder,block |
https://gitee.com/open_euler/dashboard?issue_id=I81OPU |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/anaconda |
|
openEuler-23.09-round-4 |
[Eulermaker&OBS] glibc build problem in openEuler:23.09 |
苏伟锋 |
block,sig/Computing |
https://gitee.com/open_euler/dashboard?issue_id=I81PAC |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/glibc |
|
openEuler-23.09-round-4 |
[23.09-RC4][arm/x86][Aops] aops服务起来后，漏洞扫描一直处于扫描中 |
wenxin |
sig/sig-ops |
https://gitee.com/open_euler/dashboard?issue_id=I81PCO |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/aops-apollo |
|
openEuler-23.09-round-4 |
[23.09 RC4] -fsimdmath选项导致编译失败 |
eastb233 |
sig/Compiler |
https://gitee.com/open_euler/dashboard?issue_id=I81QFK |
https://gitee.com/open_euler/dashboard/projects/openeuler/gcc |
|
openEuler-23.09-round-4 |
[23.09-RC4][arm/x86][Aops]
生成修复任务异常显示 |
王?伊? |
sig/sig-ops |
https://gitee.com/open_euler/dashboard?issue_id=I81QK8 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/aops-hermes |
|
openEuler-23.09-round-4 |
[23.09-RC4][arm/x86][Aops]
部署aops服务，启动异常 |
龚正堂 |
sig/sig-ops |
https://gitee.com/open_euler/dashboard?issue_id=I81R50 |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/aops-vulcanus |
|
openEuler-23.09-round-4 |
[23.09-RC4][arm/x86][Aops]
前端页面页码跳转，页面显示异常 |
王?伊? |
sig/sig-ops |
https://gitee.com/open_euler/dashboard?issue_id=I81RIT |
https://gitee.com/open_euler/dashboard/projects/src-openeuler/aops-hermes |
|
openEuler-23.09-round-2 |
GPT2设置batch_size=4跑满step系统panic |
房闯闯 |
sig/Kernel |
https://gitee.com/open_euler/dashboard?issue_id=I81RZT |
https://gitee.com/open_euler/dashboard/projects/openeuler/kernel |
participants (1)
-
Zengweifeng (Weifeng Zeng)